Annotation of ports/README, Revision 1.9
1.4 marc 1:
1.2 joey 2: Welcome to the OpenBSD ports collection.
3: For more information on the OpenBSD ports tree please visit
4: http://www.openbsd.org/ports.html
5: For general information on the OpenBSD tree please visit
6: http://www.openbsd.org
1.1 joey 7:
8:
1.7 espie 9: Contacts
10: ========
1.5 espie 11: * individual ports list a
12: MAINTAINER=
1.7 espie 13: line in their Makefile.
1.5 espie 14: * specific issues related to the ports framework (e.g., bugs in
15: bsd.port.mk) should go to ports-admin@openbsd.org
16: * ports without explicit maintainers, and other general issues should
17: go to ports@openbsd.org
18:
1.7 espie 19: Considering the size of the ports tree, and even though we strive to
1.9 ! avsm 20: eradicate all bugs, things may go wrong on individual ports.
1.7 espie 21: In such a case, as a general rule, try to contact the MAINTAINER first.
22: If nothing happens after a reasonable delay, start plaguing him,
23: or go to the next step.
1.5 espie 24:
1.9 ! avsm 25: Developers with a major investment in the ports tree include
1.5 espie 26: brad@cvs.openbsd.org, turan@cvs.openbsd.org, espie@cvs.openbsd.org
27:
28: Those people can be contacted to put some pressure on a lazy maintainer.
29: But we do read ports@openbsd.org, so...
30:
31: The ports tree
32: ==============
33: The ports tree usually live under /usr/ports. It's a hierarchical
34: list of recipes to build various pieces of software.
35: We'll call that PORTSDIR in the following discussion.
1.9 ! avsm 36: Stuff that doesn't constitute a port proper, but rather paraphernalia,
1.5 espie 37: is stored under /usr/ports/infrastructure, INFRA in the following
38: discussion.
39:
40: The main Makefile, PORTSDIR/Makefile, can be used to obtain various
41: information.
42:
43: * make search key=<keyword>
44: will locate ports that match the given keyword in the Index and print
45: information about them.
46:
47: * make index
48: can be used to rebuild that INDEX, normally useful after you update your
49: ports dir through cvs.
50:
51: * make readmes
52: will populate the ports tree with a set of html indices.
53:
54: The script INFRA/build/out-of-date will find
55: discrepancies between your installed packages and the INDEX. This might
56: give you an hint as to what you would need to rebuild to update a machine.
57:
58: Some useful `make' trivia
59: =========================
60: * if you always use some make variables, e.g., DISTDIR, CLEANDEPENDS, or
61: MASTER_SITE_OVERRIDE you can put this in your local make configuration
62: file instead: /etc/mk.conf.
63: * starting with 2.6, make can deal with case issues, so CLEANDEPENDS=Yes
64: or CLEANDEPENDS=YES or even CLEANDEPENDS=yEs should be equivalent.
65: * the make process uses some subroutines out of /usr/share/mk. Starting
66: with 2.6, the `port' subroutines live in INFRA/mk.
67: The bsd.port.mk and bsd.port.subdir.mk in /usr/share/mk are only stubs
68: that redirect to those files.
69:
70: Building a port
71: ===============
72: It's usually as simple as
73: cd category/portname && make && make install
74:
75: That specific `make' will normally
76: * resolve dependencies and go out to install required ports recursively
77: * fetch the software source (`distfiles' and `distribution patches')
78: from the available media into your repository
79: * extract the source
80: * apply distribution patches and OpenBSD patches
81: * build the program
82:
83: `make install' will
84: * install the software on your system
85: * log the installation so that later pkg_info or pkg_delete can deal with
86: the software.
87:
88: Some ports can have some options, or demand that you make some choice
89: before building, e.g.,
90: cd /usr/ports/security/ssh
91: make all install USA_RESIDENT=no
92:
93: Some ports may prompt you for more choice, or give you important
94: information about ports building. Likewise, installing or uninstalling
95: a port may give you useful information. READ IT.
96:
97: You can also use
98: * `make uninstall' to remove the installed software (same as pkg_delete)
99: * `make package' to convert the installed software into a binary `package'
100: (a tar ball that you can share with other machines with the same
101: configuration, contribute to the ftp project, or that you can backup
102: separately). Packages normally end up in /usr/ports/packages, overridable
103: with PACKAGE.
104: * `make fetch-list' to build a small shell-script that should be able to
105: retrieve the missing distfiles and distribution patches for the given port.
106: * `make clean' to remove all scaffolding after the port is built and
107: installed.
108: * `make distclean' to also remove distfiles and distribution patches
109: from the repository
110: * `make clean CLEANDEPENDS=Yes' will also remove sub ports that have been
111: recursively built.
112: * `make distclean CLEANDEPENDS=Yes', guess what this does.
113:
114: Please note that, in normal use, the OpenBSD ports tree will grow quite
1.8 espie 115: a lot. Careful use of make clean and make distclean will help you. You
116: can also redirect ports activity elsewhere by making use of WRKOBJDIR
117: and DISTDIR. `find /usr/ports -type d -name work\* -print'
118: can be useful to find out ports you forgot to clean out.
1.5 espie 119:
120: There are a few kinks in the building of ports with options yet. Namely,
121: all such ports should produce distinct package names if built with
122: different options. Also, there is no check for consistency between
123: make and make install. Taking the ssh example again,
124: make USA_RESIDENT=No
125: make install USA_RESIDENT=Yes
126: won't be flagged as an error...
127:
128: Where do the distfiles come from
129: ================================
130: Retrieving distfiles is a subpart of `make' that can be invoked separately
131: as `make fetch'.
132:
133: Starting with 2.6, the fetch process is configurable by editing
134: INFRA/db/network.conf.
135:
136: The ports tree does store files it retrieves in a repository area,
137: normally /usr/ports/distfiles (defined as DISTDIR=${PORTSDIR}/distfiles;
138: you can override this if you need; e.g., assuming you've got a cdrom
139: full of distfiles mounted under /cdrom, you can make stuff with
140: DISTDIR=/cdrom/distfiles, provided all the distfiles are available on
141: the CD-Rom).
142:
143: If the file is found in the repository, the build process continues.
144: In some rare cases, vendors change their archive contents without changing
145: the archive name, so the file in the repository may end up having a wrong
146: checksum. Or, if you aborted a network transfer, the file in the repository
147: may be truncated, and end up having a wrong checksum again. In such a case,
148: manual intervention is required (it was deemed that such problems may need
149: human expertise and that blindly removing distfiles was not a good idea).
150: It's usually as simple as deleting the offending file, or doing a
151: make distclean.
152:
153: To avoid building from corrupted archives, the ports tree holds checksums
154: for almost all files it retrieves from other media (a few ports ignore
155: checksums from the files listed in IGNOREFILES).
156: Those are strong cryptographic checksums: sha1, rmd160, and md5,
157: in that order. See CIPHERS and PREFERRED_CIPHERS in
158: INFRA/mk/bsd.port.mk for details.
159:
160: If the directory /cdrom/distfiles exist, available distfiles are copied
161: off that directory to your repository. You can avoid the copy overhead
162: by defining FETCH_SYMLINK_DISTFILES. You can give another location for
163: the distfiles as CDROM_SITE.
164:
165: OpenBSD `ftp' command is normally used to fetch distfiles off the net,
166: so all file addresses are given in URL format.
167: Each port uses its own set of sites, and there should also be backups of
168: the distribution files on ftp.openbsd.org. MASTER_SITE_BACKUP holds an
169: overridable list of backup sites, normally
170: ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/${DIST_SUBDIR}/
171: ftp://ftp.openbsd.org/pub/OpenBSD/licensed/${DIST_SUBDIR}/
172: ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/
173:
174: You can ask the fetch process to try to retrieve files from those sites first
175: by setting MASTER_SITE_OVERRIDE, e.g.,
176: make MASTER_SITE_OVERRIDE='${MASTER_SITE_BACKUP}'
177:
178: You can retrieve file from the OpenBSD site only with
179: make MASTER_SITE_OPENBSD=Yes
180:
181: Continuing our CD-Rom example, you could also fetch files off a CD-Rom into
182: your repository for safe-keeping by using the following incantation:
1.8 espie 183: make fetch MASTER_SITE_OVERRIDE='file:/cdrom/${DIST_SUBDIR}/'
1.5 espie 184: This is equivalent to using CDROM_SITE.
185:
186: Some common sites have their own variables. It is strongly recommended
187: that you edit the INFRA/db/network.conf file for
188: your site.
189:
190: Please refer to that file for a complete list, and address lists
191: (those are not exhaustive). Those include:
192: MASTER_SITE_GNU FSF and other GPL programs
193: MASTER_SITE_XCONTRIB X11 contributed software
194: MASTER_SITE_SUNSITE Sunsite site and mirror, major linux archive
195: MASTER_SITE_GNOME Gnome
196: MASTER_SITE_PERL_CPAN Comprehensive perl archive network
197: MASTER_SITE_TEX_CTAN Comprehensive TeX archive network
198: MASTER_SITE_KDE KDE
199: MASTER_SITE_TCLTK Tcl/Tk
200: MASTER_SITE_AFTERSTEP AfterStep
201: MASTER_SITE_WINDOWMAKER WindowMaker
202:
203: There is a backup copy of that file in
204: INFRA/templates/network.conf.template.
205:
206: In case you don't have a permanent network connection,
207: `make fetch-list' should provide you with a shell script you can use to
208: retrieve distfiles you're missing to build a given port.
209:
210: (TODO: improve and systematize fetch-all)
211:
212: Building several ports
213: ======================
214: Each category directory holds a Makefile that propagates commands to
215: its sub ports, e.g., if you cd /usr/ports/audio && make, this should
216: build all ports under /usr/ports/audio.
217:
218: A more useful command is the
219: INFRA/build/find-build-order script.
220: You normally prepare a list of the ports you want to build, in the same
221: format as INFRA/db/essentials, and pass it to find-build-order like
222: this:
223: cd /usr/ports/infrastructure
224: cat db/essentials|build/find-build-order
225: This yields a sorted list of the required ports.
226:
227: (Todo: provide for a script which builds everything we want)
228:
229: You can filter ports that require interaction out with
230: make BATCH=yes
231:
232: Likewise, make FOR_CDROM=yes, make NO_RESTRICTED=yes
233: will yield only the ports with the required level of liberty.
234:
235: Files Summary
236: =============
237: /usr/ports (PORTSDIR):
238: the whole port collection
239: /usr/ports/<category>/<portname>:
240: where to find a given port
241: /usr/ports/INDEX:
242: all distfiles, rebuilt with make index
243: /usr/ports/README.html
244: /usr/ports/<category>/README.html
245: /usr/ports/<category>/<portname>/README.html:
246: www indices produced by make readmes
247: /usr/ports/distfiles (DISTFILES):
248: repository for distribution files and distribution patches
249: /cdrom/distfiles (CDROM_SITE):
250: standard location for distfiles off a CD
251: /usr/ports/packages (PACKAGES):
252: where binary packages are built (by category. Normally everything
253: ends up under All, with symlinks for each category)
254: /usr/ports/<category>/<portname>/work:
255: where the ports mechanism does the building. This is normally a
256: real directory, but you can set WRKOBJDIR to point to another
257: base which is not /usr/ports, and work/ will be a link to
258: ${WRKOBJDIR}/category/portname/work. This can be useful to
259: mount a master /usr/ports directory by NFS on several
260: architectures. Normally, you first
261: cd /usr/ports && make WRKOBJDIR=path obj
262: on the master machine, which creates the symbolic links, so that
263: you can mount your master /usr/ports read-only.
264: /usr/ports/<category>/<portname>/pkg/SECURITY:
265: information relative to a security audit of the port. Usually
266: missing.
267: /usr/ports/infrastructure:
268: paraphernalia around the ports tree
269: /usr/ports/db/network.conf:
270: your local network configuration (ftp sites)
271: /var/db/pkg:
272: installed ports, see pkg_add(1).
273: /usr/local (LOCALBASE):
274: where normal ports install themselves.
275: /usr/X11R6 (X11BASE):
276: where ports with a large dependency on X11 install themselves.
277:
278: Other tweaks
279: ============
280: FORCE_PACKAGE: force package building. Some ports can't be distributed
281: as packages for legal reasons, but you may wish to build a package for
282: your private consumption.
283: HAVE_MOTIF: set in /etc/mk.conf if we own a copy of the real thing.
284: MOTIF_STATIC: set in /etc/mk.conf to use a static version of the Motif
285: library only.
286: NO_MTREE: don't run mtree before installing a port. This is a dangerous
287: option.
288: NO_PKG_REGISTER: used for make install, don't register port under
289: /var/db/pkg. This is a dangerous option.
290: FORCE_PACKAGE_REGISTER: override an existing port (the <pkgname> is already
291: installed message). You will end up with several flavors of the same
292: package. This is a dangerous option, as this will probably erase the other
293: port.
294: NO_IGNORE: coerce fetch, build, install... into doing their job even though
295: there might be a good reason not to. Good reasons include BROKEN,
296: ONLY_FOR_ARCH, IS_INTERACTIVE in BATCH mode, NO_CDROM in FOR_CDROM... This
297: is a dangerous option.
298:
299: Keeping up with the Jones, ports as a moving target
300: ===================================================
301: The OpenBSD ports tree is growing from release to release. It needs
302: people to write and test new ports.
303: Like for src, you can choose to live on the bleeding edge by updating
304: your ports dir thru cvs or ftp, and contribute bug-reports.
305:
306: If you prefer to stay with a stable release, we try to make sure
307: the distfiles for a given release stay on the OpenBSD site between
308: releases.
1.1 joey 309:
1.3 marc 310: No matter how fast we update the tree it seems that we are always
311: behind. For this reason you will sometimes find a port that is
312: marked as BROKEN. If you try to build the port you will see a
313: message something like:
314:
315: ===> xxx-1.0 is marked as broken: newer version available.
316:
317: This means we know there is a newer version of the application but
318: have not yet had time to update the port. If you get this message
319: all may not be lost. If the old sources are still available (and
320: this is often the case) you can force a build using the old sources
321: using the command:
322:
323: make NO_IGNORE=yes
324: sudo make NO_IGNORE=yes install
325:
1.4 marc 326: If you're feeling generous a better solution is to update the port
1.3 marc 327: to use the new sources and feed the changes back to the project.
328: If you are interested in contributing (or creating a new port)
329: please visit
330:
1.1 joey 331: http://www.openbsd.org/porting.html
1.3 marc 332:
1.9 ! avsm 333: $OpenBSD: README,v 1.8 1999/10/07 16:44:28 espie Exp $