[BACK]Return to Makefile CVS log [TXT][DIR] Up to [local] / src

Diff for /src/Makefile between version 1.14 and 1.110

version 1.14, 1997/02/27 20:57:52 version 1.110, 2005/01/09 00:14:32
Line 1 
Line 1 
 #       $OpenBSD$  #       $OpenBSD$
 #       $NetBSD: Makefile,v 1.25 1995/10/09 02:11:28 thorpej Exp $  
   
   #
   # For more information on building in tricky environments, please see
   # the list of possible environment variables described in
   # /usr/share/mk/bsd.README.
   #
   # Building recommendations:
   #
   # 1) If at all possible, put this source tree in /usr/src.  If /usr/src
   # must be a symbolic link, setenv BSDSRCDIR to point to the real location.
   #
   # 2) It is also recommended that you compile with objects outside the
   # source tree. To do this, ensure /usr/obj exists or points to some
   # area of disk of sufficient size.  Then do "cd /usr/src; make obj".
   # This will make a symbolic link called "obj" in each directory, as
   # well as populate the /usr/obj properly with directories for the
   # objects.
   #
   # 3) It is strongly recommended that you build and install a new kernel
   # before rebuilding your system. Some of the new programs may use new
   # functionality or depend on API changes that your old kernel doesn't have.
   #
   # 4) If you are reasonably sure that things will compile OK, use the
   # "make build" target supplied here. Good luck.
   #
   # 5) If you want to setup a cross-build environment, there is a "cross-tools"
   # target available which upon completion of "make TARGET=<target> cross-tools"
   # (where <target> is one of the names in the /sys/arch directory) will produce
   # a set of compilation tools along with the includes in the /usr/cross/<target>
   # directory. The "cross-distrib" target will build cross-tools as well as
   # binaries for a given <target>.
   #
   
 .include <bsd.own.mk>   # for NOMAN, if it's there.  .include <bsd.own.mk>   # for NOMAN, if it's there.
   
 # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW  
   
 SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share games  SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share games
 SUBDIR+= gnu  SUBDIR+= gnu
   
 SUBDIR+= sys lkm  SUBDIR+= sys lkm
   
 .if defined(KERBEROS)  .if (${KERBEROS5:L} == "yes")
 SUBDIR+= kerberosIV  SUBDIR+= kerberosV
 .endif  .endif
   
 .if exists(regress)  .if   make(clean) || make(cleandir) || make(obj)
 .ifmake !(install)  SUBDIR+= distrib regress
 SUBDIR+= regress  
 .endif  .endif
   
   .if exists(regress)
 regression-tests:  regression-tests:
         @echo Running regression tests...          @echo Running regression tests...
         @(cd ${.CURDIR}/regress && ${MAKE} regress)          @cd ${.CURDIR}/regress && ${MAKE} depend && exec ${MAKE} regress
 .endif  .endif
   
 includes:  includes:
         (cd ${.CURDIR}/include; ${MAKE} includes)          cd ${.CURDIR}/include && ${MAKE} prereq && exec ${SUDO} ${MAKE} includes
   
 beforeinstall:  beforeinstall:
 .ifndef DESTDIR          cd ${.CURDIR}/etc && exec ${MAKE} DESTDIR=${DESTDIR} distrib-dirs
         (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)          cd ${.CURDIR}/include && exec ${MAKE} includes
 .else  
         (cd ${.CURDIR}/etc && ${MAKE} distrib-dirs)  
 .endif  
         (cd ${.CURDIR}/include; ${MAKE} includes)  
   
 afterinstall:  afterinstall:
 .ifndef NOMAN  .ifndef NOMAN
         (cd ${.CURDIR}/share/man && ${MAKE} makedb)          cd ${.CURDIR}/share/man && exec ${MAKE} makedb
 .endif  .endif
   
 build:  build:
         (cd ${.CURDIR}/share/mk && ${MAKE} install)  .ifdef GLOBAL_AUTOCONF_CACHE
         (cd ${.CURDIR}/include; ${MAKE} includes)          cp /dev/null ${GLOBAL_AUTOCONF_CACHE}
         ${MAKE} cleandir  
         (cd ${.CURDIR}/lib && ${MAKE} depend && ${MAKE} && ${MAKE} install)  
         (cd ${.CURDIR}/gnu/lib && ${MAKE} depend && ${MAKE} && ${MAKE} install)  
 .if (${MACHINE_ARCH} == "mips")  
         ldconfig  
 .endif  .endif
 .if defined(KERBEROS)          cd ${.CURDIR}/share/mk && exec ${SUDO} ${MAKE} install
         (cd ${.CURDIR}/kerberosIV && ${MAKE} build)          cd ${.CURDIR}/include && ${MAKE} prereq && exec ${SUDO} ${MAKE} includes
           ${SUDO} ${MAKE} cleandir
           cd ${.CURDIR}/lib && ${MAKE} depend && ${MAKE} && \
               NOMAN=1 exec ${SUDO} ${MAKE} install
           cd ${.CURDIR}/gnu/lib && ${MAKE} depend && ${MAKE} && \
               NOMAN=1 exec ${SUDO} ${MAKE} install
           ${MAKE} depend && ${MAKE} && exec ${SUDO} ${MAKE} install
   
   .if !defined(TARGET)
   cross-tools cross-distrib:
           echo "TARGET must be set"; exit 1
   .else
   cross-tools:    cross-includes cross-binutils cross-gcc cross-lib
   cross-distrib:  cross-tools cross-bin cross-etc-root-var
   
   CROSSCPPFLAGS?= -nostdinc -I${CROSSDIR}/usr/include
   CROSSLDFLAGS?=  -nostdlib -L${CROSSDIR}/usr/lib -static
   CROSSCFLAGS?=   ${CROSSCPPFLAGS}
   CROSSCXXFLAGS?= ${CROSSCPPFLAGS}
   LDSTATIC?=      -static
   
   CROSSDIR=       ${DESTDIR}/usr/cross/${TARGET}
   CROSSENV=       AR=${CROSSDIR}/usr/bin/ar AS=${CROSSDIR}/usr/bin/as \
                   CC=${CROSSDIR}/usr/bin/cc CPP=${CROSSDIR}/usr/bin/cpp \
                   CXX=${CROSSDIR}/usr/bin/c++ \
                   LD=${CROSSDIR}/usr/bin/ld NM=${CROSSDIR}/usr/bin/nm \
                   LORDER=/usr/bin/lorder RANLIB=${CROSSDIR}/usr/bin/ranlib \
                   SIZE=${CROSSDIR}/usr/bin/size STRIP=${CROSSDIR}/usr/bin/strip \
                   HOSTCC=\"${CC}\" HOSTCXX=\"${CXX}\" NOMAN= DESTDIR=${CROSSDIR} \
                   HOSTCFLAGS=\"${CFLAGS}\" HOSTCXXFLAGS=\"${CXXFLAGS}\" \
                   HOSTLDFLAGS=\"${LDFLAGS} \" \
                   CFLAGS=\"${CROSSCFLAGS}\" CPPFLAGS=\"${CROSSCPPFLAGS}\" \
                   CXXFLAGS=\"${CROSSCXXFLAGS}\" \
                   LDFLAGS=\"${CROSSLDFLAGS}\"
   CROSSPATH=      ${PATH}:${CROSSDIR}/usr/bin
   CROSSLANGS?=    c c++
   
   CROSSDIRS=      ${CROSSDIR}/.dirs_done
   CROSSOBJ=       ${CROSSDIR}/usr/obj/.obj_done
   CROSSINCLUDES=  ${CROSSDIR}/usr/include/.includes_done
   CROSSBINUTILS=  ${CROSSDIR}/usr/bin/.binutils_done
   CROSSGCC=       ${CROSSDIR}/usr/bin/.gcc_done
   NO_CROSS=       isakmpd tn3270 less sudo openssl libkeynote libssl \
                   photurisd keynote sectok ssh
   
   cross-dirs:     ${CROSSDIRS}
   cross-obj:      ${CROSSOBJ}
   cross-includes: ${CROSSINCLUDES}
   cross-binutils: ${CROSSBINUTILS}
   cross-gcc:      ${CROSSGCC}
   
   cross-env:      .PHONY
           @echo ${CROSSENV} MACHINE=${TARGET} \
               MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH`
   
   ${CROSSDIRS}:
           @-mkdir -p ${CROSSDIR}
           @case ${TARGET} in \
                   alpha|amd64|hppa|hppa64|i386|m68k|m88k|powerpc|sparc|sparc64|vax) \
                           echo ${TARGET} ;;\
                   amiga|hp300|mac68k|mvme68k) \
                           echo m68k ;;\
                   luna88k|mvme88k) \
                           echo m88k ;;\
                   macppc|mvmeppc) \
                           echo powerpc ;;\
                   sgi) \
                           echo mips64 ;;\
                   *) \
                           (echo Unknown arch ${TARGET} >&2) ; exit 1;; \
           esac > ${CROSSDIR}/TARGET_ARCH
           @echo TARGET_ARCH is `cat ${CROSSDIR}/TARGET_ARCH`
           @eval `grep '^osr=' sys/conf/newvers.sh`; \
              sed "s/\$$/-unknown-openbsd$$osr/" ${CROSSDIR}/TARGET_ARCH > \
              ${CROSSDIR}/TARGET_CANON
           @-mkdir -p ${CROSSDIR}
           @-mkdir -p ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`
           @ln -sf ${CROSSDIR}/usr/include \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/include
           @ln -sf ${CROSSDIR}/usr/lib \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/lib
           @-mkdir -p ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin
           @(cd ${.CURDIR}/etc && DESTDIR=${CROSSDIR} ${MAKE} distrib-dirs)
           @touch ${CROSSDIRS}
   
   ${CROSSOBJ}:    ${CROSSDIRS}
           @-mkdir -p ${CROSSDIR}/usr/obj
           @(cd ${.CURDIR} && \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               MACHINE=${TARGET} \
               MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} obj)
           @touch ${CROSSOBJ}
   
   ${CROSSINCLUDES}:       ${CROSSOBJ}
           @-mkdir -p ${CROSSDIR}/usr/include
           @(cd ${.CURDIR}/include && \
               MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} prereq && \
               MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} DESTDIR=${CROSSDIR} includes)
           @touch ${CROSSINCLUDES}
   
   .if ${MACHINE_ARCH} == "m68k" || ${MACHINE_ARCH} == "m88k" || \
       ${MACHINE_ARCH} == "vax"
   BINUTILS=       ar as ld nm ranlib objcopy objdump strings strip
   NEW_BINUTILS?=  No
   .else
   BINUTILS=       ar as gasp ld nm objcopy objdump ranlib readelf size \
                   strings strip
   NEW_BINUTILS?=  Yes
 .endif  .endif
         ${MAKE} depend && ${MAKE} && ${MAKE} install  
   
   ${CROSSBINUTILS}:       ${CROSSINCLUDES}
   .if ${NEW_BINUTILS:L} == "yes"
           (cd ${.CURDIR}/gnu/usr.bin/binutils; \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               TARGET_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               ${MAKE} -f Makefile.bsd-wrapper depend && \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               TARGET_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               ${MAKE} -f Makefile.bsd-wrapper all && \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} -f Makefile.bsd-wrapper install)
   .else
           (cd ${.CURDIR}/gnu/usr.bin/gas; \
               TARGET_MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} depend all; \
               TARGET_MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/as \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/as
           (cd ${.CURDIR}/gnu/usr.bin/ld; \
               TARGET_MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOPIC= NOMAN= depend all; \
               TARGET_MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOPIC= NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/ld \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/ld
           (cd ${.CURDIR}/usr.bin/ar; \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} NOMAN= depend all; \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/ar \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/ar
           (cd ${.CURDIR}/usr.bin/ranlib; \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} NOMAN= depend all; \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/ranlib \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/ranlib
           (cd ${.CURDIR}/usr.bin/strip; \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} TARGET_MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               NOMAN= depend all; \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} TARGET_MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/strip \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/strip
   .endif
           @for cmd in ${BINUTILS}; do \
            if [ ! -e ${CROSSDIR}/usr/bin/$$cmd -a \
            -e ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-$$cmd ]; then \
               ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-$$cmd \
                   ${CROSSDIR}/usr/bin/$$cmd ;\
            elif [ -e ${CROSSDIR}/usr/bin/$$cmd -a \
            ! -e ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-$$cmd ]; then \
               ln -sf ${CROSSDIR}/usr/bin/$$cmd \
                   ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-$$cmd; \
            fi ;\
            if [ -e ${CROSSDIR}/usr/bin/$$cmd -a \
            ! -e ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/$$cmd ]; then \
               ln -sf ${CROSSDIR}/usr/bin/$$cmd \
                   ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/$$cmd; \
            fi ;\
           done
           @touch ${CROSSBINUTILS}
   
   # bsd.own.mk can't do it for us
   .if ${TARGET} == "amd64" || ${TARGET} == "cats" || \
       ${TARGET} == "hppa" || ${TARGET} == "hppa64" || \
       ${TARGET} == "i386" || \
       ${TARGET} == "sparc64" || ${TARGET} == "sgi"
   USE_GCC3=yes
   .endif
   
   ${CROSSGCC}:            ${CROSSBINUTILS}
   .if ${USE_GCC3:L} == "yes"
           (cd ${.CURDIR}/gnu/usr.bin/gcc; \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               TARGET_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` CROSSDIR=${CROSSDIR} \
               ${MAKE} -f Makefile.bsd-wrapper depend && \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               TARGET_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` CROSSDIR=${CROSSDIR} \
               ${MAKE} -f Makefile.bsd-wrapper all && \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} -f Makefile.bsd-wrapper install)
           ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-g++ \
               ${CROSSDIR}/usr/bin/c++
           ln -sf ${CROSSDIR}/usr/libexec/cpp \
               ${CROSSDIR}/usr/bin/cpp
   .else
           (cd ${CROSSDIR}/usr/obj/gnu/egcs/gcc; \
               /bin/sh ${.CURDIR}/gnu/egcs/gcc/configure \
               --with-gnu-as --with-gnu-ld --prefix ${CROSSDIR}/usr \
               --target `cat ${CROSSDIR}/TARGET_CANON` \
               --enable-languages="c,c++" --enable-cpp --disable-nls \
               --with-gxx-include-dir=${CROSSDIR}/usr/include/g++ && \
               PATH=${CROSSPATH} ${MAKE} BISON=yacc LANGUAGES="${CROSSLANGS}" \
               CFLAGS="${CFLAGS} -I${.CURDIR}/gnu/lib/libiberty/include" \
               LIBIBERTY_INCLUDES=${.CURDIR}/gnu/lib/libiberty/include \
               DEMANGLER_PROG= DEMANGLE_H= LDFLAGS="${LDSTATIC}" build_infodir=. \
               GCC_FOR_TARGET="./xgcc -B./ -I${CROSSDIR}/usr/include" && \
               ${MAKE} BISON=yacc LANGUAGES="${CROSSLANGS}" LDFLAGS="${LDSTATIC}" \
               GCC_FOR_TARGET="./xgcc -B./ -I${CROSSDIR}/usr/include" \
               CFLAGS="${CFLAGS} -I${.CURDIR}/gnu/lib/libiberty/include" \
               LIBIBERTY_INCLUDES=${.CURDIR}/gnu/lib/libiberty/include \
               build_infodir=. INSTALL_MAN= INSTALL_HEADERS_DIR= install)
           ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-gcc \
               ${CROSSDIR}/usr/bin/cc
           ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-g++ \
               ${CROSSDIR}/usr/bin/c++
           ${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} \
               ${CROSSDIR}/usr/obj/gnu/egcs/gcc/cpp \
               ${CROSSDIR}/usr/libexec/cpp
           sed -e 's#/usr/libexec/cpp#${CROSSDIR}/usr/libexec/cpp#' \
               -e 's#/usr/include#${CROSSDIR}/usr/include#' \
               ${.CURDIR}/usr.bin/cpp/cpp.sh > ${CROSSDIR}/usr/bin/cpp
           chmod ${BINMODE} ${CROSSDIR}/usr/bin/cpp
           chown ${BINOWN}:${BINGRP} ${CROSSDIR}/usr/bin/cpp
   .endif
           @touch ${CROSSGCC}
   
   # XXX MAKEOBJDIR maybe should be obj.${TARGET} here, revisit later
   cross-lib:      ${CROSSGCC}
           MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH`; \
           export MACHINE MACHINE_ARCH; \
           (cd ${.CURDIR}/lib; \
               for lib in csu libc; do \
               (cd $$lib; \
                   eval ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
                       ${MAKE} depend all install); \
               done; \
               eval ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
                   SKIPDIR=\"${NO_CROSS} libocurses/PSD.doc\" \
                   ${MAKE} depend all install)
   
   cross-bin:      ${CROSSOBJ}
           MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH`; \
           export MACHINE MACHINE_ARCH; \
           for i in libexec bin sbin usr.bin usr.sbin; do \
           (cd ${.CURDIR}/$$i; \
               eval ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
                   SKIPDIR=\"${BINUTILS} ${NO_CROSS}\" \
                   ${MAKE} depend all install); \
           done
   
   cross-etc-root-var:     ${CROSSOBJ}
           (cd ${.CURDIR}/etc && \
               DESTDIR=${CROSSDIR} ${MAKE} distribution-etc-root-var)
   
   cross-depend:   .PHONY
           @(cd ${.CURDIR} && \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               SKIPDIR="${NO_CROSS}" \
               ${MAKE} depend)
   
   cross-clean:    .PHONY
           @(cd ${.CURDIR} && \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               SKIPDIR="${NO_CROSS}" \
               ${MAKE} clean)
   
   cross-cleandir: .PHONY
           @(cd ${.CURDIR} && \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               SKIPDIR="${NO_CROSS}" \
               ${MAKE} cleandir)
   
   .endif # defined(TARGET)
   
 .include <bsd.subdir.mk>  .include <bsd.subdir.mk>
Legend:
Removed from v.1.14  
changed lines
  Added in v.1.110