[BACK]Return to Makefile CVS log [TXT][DIR] Up to [local] / src

Diff for /src/Makefile between version 1.5 and 1.71

version 1.5, 1996/03/02 21:04:11 version 1.71, 2001/08/31 12:47:57
Line 1 
Line 1 
 #       $NetBSD: Makefile,v 1.25 1995/10/09 02:11:28 thorpej Exp $  #       $OpenBSD$
   
 # NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW  #
   # For more information on building in tricky environments, please see
   # the list of possible environment variables described in
   # /usr/share/mk/bsd.README.
   #
   # Building recommendations:
   #
   # 1) If at all possible, put this source tree in /usr/src.  If /usr/src
   # must be a symbolic link, setenv BSDSRCDIR to point to the real location.
   #
   # 2) It is also recommended that you compile with objects outside the
   # source tree. To do this, ensure /usr/obj exists or points to some
   # area of disk of sufficient size.  Then do "cd /usr/src; make obj".
   # This will make a symbolic link called "obj" in each directory, as
   # well as populate the /usr/obj properly with directories for the
   # objects.
   #
   # 3) It is strongly recommended that you build and install a new kernel
   # before rebuilding your system. Some of the new programs may use new
   # functionality or depend on API changes that your old kernel doesn't have.
   #
   # 4) If you are reasonably sure that things will compile OK, use the
   # "make build" target supplied here. Good luck.
   #
   # 5) If you want to setup a cross-build environment, there is a "cross-tools"
   # target available which upon completion of "make TARGET=<target> cross-tools"
   # (where <target> is one of the names in the /sys/arch directory) will produce
   # a set of compilation tools along with the includes in the /usr/cross/<target>
   # directory.
   #
   
   .include <bsd.own.mk>   # for NOMAN, if it's there.
   
 SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share games  SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share games
 SUBDIR+= gnu  SUBDIR+= gnu
   
 SUBDIR+= sys lkm  SUBDIR+= sys lkm
   
 .include <bsd.own.mk>   # for NOMAN, if it's there.  .if (${KERBEROS:L} == "yes")
   
 .if defined(KERBEROS)  
 SUBDIR+= kerberosIV  SUBDIR+= kerberosIV
 .endif  .endif
   
   .if (${KERBEROS5:L} == "yes")
   SUBDIR+= kerberosV
   .endif
   
   .if   make(clean) || make(cleandir) || make(obj)
   SUBDIR+= distrib
   .endif
   
 .if exists(regress)  .if exists(regress)
 .ifmake !(install)  .ifmake !(install)
 SUBDIR+= regress  SUBDIR+= regress
Line 20 
Line 57 
   
 regression-tests:  regression-tests:
         @echo Running regression tests...          @echo Running regression tests...
         @(cd ${.CURDIR}/regress && ${MAKE} regress)          @cd ${.CURDIR}/regress && exec ${MAKE} regress
 .endif  .endif
   
 #beforeinstall:  includes:
 #       (cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)          cd ${.CURDIR}/include && ${MAKE} prereq && exec ${SUDO} ${MAKE} includes
   
   beforeinstall:
           cd ${.CURDIR}/etc && exec ${MAKE} DESTDIR=${DESTDIR} distrib-dirs
           cd ${.CURDIR}/include && exec ${MAKE} includes
   
 afterinstall:  afterinstall:
 .ifndef NOMAN  .ifndef NOMAN
         (cd ${.CURDIR}/share/man && ${MAKE} makedb)          cd ${.CURDIR}/share/man && exec ${MAKE} makedb
 .endif  .endif
   
 build:  build:
         (cd ${.CURDIR}/include && ${MAKE} install)  .ifdef GLOBAL_AUTOCONF_CACHE
         ${MAKE} cleandir          cp /dev/null ${GLOBAL_AUTOCONF_CACHE}
         (cd ${.CURDIR}/lib && ${MAKE} depend && ${MAKE} && ${MAKE} install)  
         (cd ${.CURDIR}/gnu/lib && ${MAKE} depend && ${MAKE} && ${MAKE} install)  
 .if defined(KERBEROS)  
         (cd ${.CURDIR}/kerberosIV && ${MAKE} build)  
 .endif  .endif
         ${MAKE} depend && ${MAKE} && ${MAKE} install          cd ${.CURDIR}/share/mk && exec ${SUDO} ${MAKE} install
           cd ${.CURDIR}/include && ${MAKE} prereq && exec ${SUDO} ${MAKE} includes
           ${SUDO} ${MAKE} cleandir
           cd ${.CURDIR}/lib && ${MAKE} depend && ${MAKE} && \
               NOMAN=1 exec ${SUDO} ${MAKE} install
           cd ${.CURDIR}/gnu/lib && ${MAKE} depend && ${MAKE} && \
               NOMAN=1 exec ${SUDO} ${MAKE} install
   .if (${KERBEROS:L} == "yes")
           cd ${.CURDIR}/kerberosIV/lib && ${MAKE} depend && ${MAKE} && \
               NOMAN=1 exec ${SUDO} ${MAKE} install
   .endif
   .if (${KERBEROS5:L} == "yes")
           cd ${.CURDIR}/kerberosV/lib && ${MAKE} depend && ${MAKE} && \
               NOMAN=1 exec ${SUDO} ${MAKE} install
   .endif
           cd ${.CURDIR}/gnu/usr.bin/perl && \
               ${MAKE} -f Makefile.bsd-wrapper depend && \
               ${MAKE} -f Makefile.bsd-wrapper perl.lib && \
               exec ${SUDO} ${MAKE} -f Makefile.bsd-wrapper install.lib
           ${MAKE} depend && ${MAKE} && exec ${SUDO} ${MAKE} install
   
   .if !defined(TARGET)
   cross-tools:
           echo "TARGET must be set"; exit 1
   .else
   cross-tools:    cross-helpers cross-dirs cross-includes cross-binutils \
           cross-gcc cross-lib
   
   CROSSDIR=       ${DESTDIR}/usr/cross/${TARGET}
   CROSSENV=       AR=${CROSSDIR}/usr/bin/ar AS=${CROSSDIR}/usr/bin/as \
                   CC=${CROSSDIR}/usr/bin/cc CPP=${CROSSDIR}/usr/bin/cpp \
                   LD=${CROSSDIR}/usr/bin/ld NM=${CROSSDIR}/usr/bin/nm \
                   LORDER=${CROSSDIR}/usr/bin/lorder \
                   RANLIB=${CROSSDIR}/usr/bin/ranlib \
                   SIZE=${CROSSDIR}/usr/bin/size STRIP=${CROSSDIR}/usr/bin/strip \
                   HOSTCC=cc
   CROSSPATH=      ${PATH}:${CROSSDIR}/usr/bin
   
   .if (${TARGET} == "sparc64")
   CROSSENV+= CPPFLAGS=-D__arch64__
   CPPFLAGS=-D__arch64__
   .endif
   
   cross-helpers:
           @-mkdir -p ${CROSSDIR}
           echo _MACHINE_ARCH | \
               cat ${.CURDIR}/sys/arch/${TARGET}/include/param.h - | \
               ${CPP} ${CPPFLAGS} -E -I${.CURDIR}/sys/arch | \
               sed -n '$$p' >${CROSSDIR}/TARGET_ARCH
           eval `grep '^osr=' sys/conf/newvers.sh`; \
              sed "s/\$$/-unknown-openbsd$$osr/" ${CROSSDIR}/TARGET_ARCH > \
              ${CROSSDIR}/TARGET_CANON
   
   cross-dirs:     ${CROSSDIR}/stamp.dirs
           @-mkdir -p ${CROSSDIR}
           @-mkdir -p ${CROSSDIR}/usr/obj
           @-mkdir -p ${CROSSDIR}/usr/bin
           @-mkdir -p ${CROSSDIR}/usr/include
           @-mkdir -p ${CROSSDIR}/usr/include/kerberosIV
           @-mkdir -p ${CROSSDIR}/usr/include/kerberosV
           @-mkdir -p ${CROSSDIR}/usr/lib
           @-mkdir -p ${CROSSDIR}/usr/libexec
           @-mkdir -p ${CROSSDIR}/var/db
           @-mkdir -p ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`
           @ln -sf ${CROSSDIR}/usr/include \
                   ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/include
           @ln -sf ${CROSSDIR}/usr/lib \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/lib
           @-mkdir -p ${CROSSDIR}/usr/obj
           @-mkdir -p ${CROSSDIR}/usr/bin
           @-mkdir -p ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin
   
   ${CROSSDIR}/stamp.dirs:
           @touch ${CROSSDIR}/stamp.dirs
   
   cross-includes: cross-dirs
           cd include; \
               MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               ${MAKE} prereq && \
               MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
               ${MAKE} DESTDIR=${CROSSDIR} includes
   
   .if ${TARGET} == "powerpc" || ${TARGET} == "alpha" || ${TARGET} == "hppa" || \
       ${TARGET} == "sparc64"
   cross-binutils: cross-binutils-new
   .else
   cross-binutils: cross-binutils-old
   .endif
   
   cross-binutils-new:     cross-dirs
           export BSDSRCDIR=`pwd`; \
               (cd ${.CURDIR}/gnu/usr.bin/binutils; \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} -f Makefile.bsd-wrapper obj); \
               (cd ${CROSSDIR}/usr/obj/gnu/usr.bin/binutils; \
               /bin/sh ${BSDSRCDIR}/gnu/usr.bin/binutils/configure \
               --prefix ${CROSSDIR}/usr \
               --disable-nls --disable-gdbtk --disable-commonbfdlib \
               --target `cat ${CROSSDIR}/TARGET_CANON` && \
               ${MAKE} CFLAGS=${CFLAGS} && ${MAKE} install ) && \
           ${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m 755 \
               ${.CURDIR}/usr.bin/lorder/lorder.sh \
               ${CROSSDIR}/usr/bin/lorder
   
   cross-binutils-old: cross-gas cross-ar cross-ld cross-strip cross-size \
           cross-ranlib cross-nm
           for cmd in ar as ld nm ranlib size strip; do \
               ln -sf $$cmd \
               ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-$$cmd; done
   
   cross-gas:      cross-dirs
           (cd ${.CURDIR}/gnu/usr.bin/gas; \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} obj; \
               TARGET_MACHINE_ARCH=${TARGET} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE}; \
               TARGET_MACHINE_ARCH=${TARGET} \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/as \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/as
   
   cross-ld:       cross-dirs
           (cd ${.CURDIR}/gnu/usr.bin/ld; \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} obj; \
               TARGET_MACHINE_ARCH=${TARGET} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN=; \
               TARGET_MACHINE_ARCH=${TARGET} \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/ld \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/ld
   
   cross-ar:       cross-dirs
           (cd ${.CURDIR}/usr.bin/ar; \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} obj; \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} NOMAN=; \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/ar \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/ar
   
   cross-ranlib:   cross-dirs
           (cd ${.CURDIR}/usr.bin/ranlib; \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} obj; \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} NOMAN=; \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/ranlib \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/ranlib
   
   cross-strip:    cross-dirs
           (cd ${.CURDIR}/usr.bin/strip; \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} obj; \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} TARGET_MACHINE_ARCH=${TARGET} NOMAN=; \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} TARGET_MACHINE_ARCH=${TARGET} NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/strip \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/strip
   
   cross-size:     cross-dirs
           (cd ${.CURDIR}/usr.bin/size; \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} obj; \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} TARGET_MACHINE_ARCH=${TARGET} NOMAN=; \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/size \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/size
   
   cross-nm:       cross-dirs
           (cd ${.CURDIR}/usr.bin/nm; \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} obj; \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} TARGET_MACHINE_ARCH=${TARGET} NOMAN=; \
               DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install)
           ln -sf ${CROSSDIR}/usr/bin/nm \
               ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/nm
   
   cross-gcc:      cross-dirs
           cd ${.CURDIR}/gnu/egcs/gcc; \
               BSDOBJDIR=${CROSSDIR}/usr/obj BSDSRCDIR=${.CURDIR} \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} -f Makefile.bsd-wrapper obj
           (cd ${CROSSDIR}/usr/obj/gnu/egcs/gcc; \
               /bin/sh ${.CURDIR}/gnu/egcs/gcc/configure \
               --prefix ${CROSSDIR}/usr \
               --target `cat ${CROSSDIR}/TARGET_CANON` && \
               PATH=${CROSSPATH} ${MAKE} BISON=yacc LANGUAGES=c \
               LDFLAGS=${LDSTATIC} build_infodir=. \
               GCC_FOR_TARGET="./xgcc -B./ -I${CROSSDIR}/usr/include" && \
               ${MAKE} BISON=yacc LANGUAGES=c LDFLAGS=${LDSTATIC} \
               GCC_FOR_TARGET="./xgcc -B./ -I${CROSSDIR}/usr/include" \
               build_infodir=. INSTALL_MAN= INSTALL_HEADERS_DIR= install)
           ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-gcc \
               ${CROSSDIR}/usr/bin/cc
           ${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} \
               ${CROSSDIR}/usr/obj/gnu/egcs/gcc/xcpp \
               ${CROSSDIR}/usr/libexec/cpp
           sed -e 's#/usr/libexec/cpp#${CROSSDIR}/usr/libexec/cpp#' \
               -e 's#/usr/include#${CROSSDIR}/usr/include#' \
               ${.CURDIR}/usr.bin/cpp/cpp.sh > ${CROSSDIR}/usr/bin/cpp
           chmod ${BINMODE} ${CROSSDIR}/usr/bin/cpp
           chown ${BINOWN}:${BINGRP} ${CROSSDIR}/usr/bin/cpp
   
   # XXX MAKEOBJDIR maybe should be obj.${TARGET} here, revisit later
   cross-lib:      cross-dirs
           MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH`; \
           export MACHINE MACHINE_ARCH; \
           (cd ${.CURDIR}/lib; \
               BSDOBJDIR=${CROSSDIR}/usr/obj \
               BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} obj; \
               for lib in csu libc; do \
                   (cd $$lib; \
                       ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
                       ${MAKE} NOMAN= depend; \
                       ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
                       ${MAKE} NOMAN=; \
                       ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
                       DESTDIR=${CROSSDIR} ${MAKE} NOMAN= install); \
               done; \
               ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= depend; \
               ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} NOMAN=; \
               ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               DESTDIR=${CROSSDIR} SKIPDIR=libocurses/PSD.doc \
               ${MAKE} NOMAN= install)
   .if (${KERBEROS:L} == "yes")
           MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH`; \
           export MACHINE MACHINE_ARCH; \
           cd kerberosIV/lib; \
           BSDOBJDIR=${CROSSDIR}/usr/obj BSDSRCDIR=${.CURDIR} \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} obj; \
           ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= depend; \
           ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} NOMAN=; \
           ${CROSSENV} DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install
   .endif
   .if (${KERBEROS5:L} == "yes")
           MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH`; \
           export MACHINE MACHINE_ARCH; \
           cd kerberosV/lib; \
           BSDOBJDIR=${CROSSDIR}/usr/obj BSDSRCDIR=${.CURDIR} \
               MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} obj; \
           ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= depend; \
           ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} NOMAN=; \
           ${CROSSENV} DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
               ${MAKE} NOMAN= install
   .endif
   .endif
   
 .include <bsd.subdir.mk>  .include <bsd.subdir.mk>
Legend:
Removed from v.1.5  
changed lines
  Added in v.1.71