===================================================================
RCS file: /cvsrepo/anoncvs/cvs/src/Makefile,v
retrieving revision 1.15
retrieving revision 1.53
diff -u -r1.15 -r1.53
--- src/Makefile	1997/02/28 23:22:07	1.15
+++ src/Makefile	2000/03/01 03:56:41	1.53
@@ -1,19 +1,51 @@
-#	$OpenBSD: Makefile,v 1.15 1997/02/28 23:22:07 niklas Exp $
-#	$NetBSD: Makefile,v 1.25 1995/10/09 02:11:28 thorpej Exp $
+#	$OpenBSD: Makefile,v 1.53 2000/03/01 03:56:41 todd Exp $
 
+#
+# For more information on building in tricky environments, please see
+# the list of possible environment variables described in
+# /usr/share/mk/bsd.README.
+# 
+# Building recommendations:
+# 
+# 1) If at all possible, put this source tree in /usr/src.  If /usr/src
+# must be a symbolic link, setenv BSDSRCDIR to point to the real location.
+#
+# 2) It is also recommended that you compile with objects outside the
+# source tree. To do this, ensure /usr/obj exists or points to some
+# area of disk of sufficient size.  Then do "cd /usr/src; make obj".
+# This will make a symbolic link called "obj" in each directory, as
+# well as populate the /usr/obj properly with directories for the
+# objects.
+#
+# 3) It is strongly recommended that you build and install a new kernel
+# before rebuilding your system. Some of the new programs may use new
+# functionality or depend on API changes that your old kernel doesn't have.
+#
+# 4) If you are reasonably sure that things will compile OK, use the
+# "make build" target supplied here. Good luck.
+#
+# 5) If you want to setup a cross-build environment, there is a "cross-tools"
+# target available which upon completion of "make TARGET=<target> cross-tools" 
+# (where <target> is one of the names in the /sys/arch directory) will produce
+# a set of compilation tools along with the includes in the /usr/cross/<target>
+# directory.
+#
+
 .include <bsd.own.mk>	# for NOMAN, if it's there.
 
-# NOTE THAT etc *DOES NOT* BELONG IN THE LIST BELOW
-
 SUBDIR+= lib include bin libexec sbin usr.bin usr.sbin share games
 SUBDIR+= gnu
 
 SUBDIR+= sys lkm
 
-.if defined(KERBEROS)
+.if (${KERBEROS} == "yes")
 SUBDIR+= kerberosIV
 .endif
 
+.if   make(clean) || make(cleandir) || make(obj)
+SUBDIR+= distrib
+.endif
+
 .if exists(regress)
 .ifmake !(install)
 SUBDIR+= regress
@@ -25,11 +57,11 @@
 .endif
 
 includes:
-	(cd ${.CURDIR}/include; ${MAKE} includes)	
+	(cd ${.CURDIR}/include; ${MAKE} prereq; ${MAKE} includes)
 
 beforeinstall:
 .ifndef DESTDIR
-	(cd ${.CURDIR}/etc && ${MAKE} DESTDIR=/ distrib-dirs)
+	(cd ${.CURDIR}/etc && ${MAKE} DESTDIR= distrib-dirs)
 .else
 	(cd ${.CURDIR}/etc && ${MAKE} distrib-dirs)
 .endif
@@ -41,69 +73,284 @@
 .endif
 
 build:
-	(cd ${.CURDIR}/share/mk && ${MAKE} install)
-	(cd ${.CURDIR}/include; ${MAKE} includes)
-	${MAKE} cleandir
-	(cd ${.CURDIR}/lib && ${MAKE} depend && ${MAKE} && ${MAKE} install)
-	(cd ${.CURDIR}/gnu/lib && ${MAKE} depend && ${MAKE} && ${MAKE} install)
+.ifdef GLOBAL_AUTOCONF_CACHE
+	rm -f ${GLOBAL_AUTOCONF_CACHE}
+.endif
+	(cd ${.CURDIR}/share/mk && ${SUDO} ${MAKE} install)
+	(cd ${.CURDIR}/include; ${MAKE} prereq; ${SUDO} ${MAKE} includes)
+	${SUDO} ${MAKE} cleandir
+	(cd ${.CURDIR}/lib && ${MAKE} depend && ${MAKE} && \
+	    ${SUDO} ${MAKE} install)
+	(cd ${.CURDIR}/gnu/lib && ${MAKE} depend && ${MAKE} && \
+	    ${SUDO} ${MAKE} install)
+	(cd ${.CURDIR}/gnu/usr.bin/perl && \
+	    ${MAKE} -f Makefile.bsd-wrapper config.sh && \
+	    ${MAKE} -f Makefile.bsd-wrapper depend && \
+	    ${MAKE} -f Makefile.bsd-wrapper perl.lib && \
+	    ${SUDO} ${MAKE} -f Makefile.bsd-wrapper install.lib)
 .if (${MACHINE_ARCH} == "mips")
 	ldconfig
 .endif
-.if defined(KERBEROS)
-	(cd ${.CURDIR}/kerberosIV && ${MAKE} build)
+.if (${KERBEROS} == "yes")
+	(cd ${.CURDIR}/kerberosIV && ${MAKE} SUDO=${SUDO} build)
+.if (${MACHINE_ARCH} == "mips")
+	ldconfig
 .endif
-	${MAKE} depend && ${MAKE} && ${MAKE} install
+.endif
+	${MAKE} depend && ${MAKE} && ${SUDO} ${MAKE} install
 
 .if !defined(TARGET)
 cross-tools:
 	echo "TARGET must be set"; exit 1
 .else
-cross-tools:	cross-helpers cross-includes cross-binutils cross-gcc
+cross-tools:	cross-helpers cross-dirs cross-includes cross-binutils \
+	cross-gcc cross-lib
 
 CROSSDIR=	${DESTDIR}/usr/cross/${TARGET}
+CROSSENV=	AR=${CROSSDIR}/usr/bin/ar AS=${CROSSDIR}/usr/bin/as \
+		CC=${CROSSDIR}/usr/bin/cc CPP=${CROSSDIR}/usr/bin/cpp \
+		LD=${CROSSDIR}/usr/bin/ld NM=${CROSSDIR}/usr/bin/nm \
+		LORDER=${CROSSDIR}/usr/bin/lorder \
+		RANLIB=${CROSSDIR}/usr/bin/ranlib \
+		SIZE=${CROSSDIR}/usr/bin/size STRIP=${CROSSDIR}/usr/bin/strip \
+		HOSTCC=cc
 
 cross-helpers:
-	-mkdir -p ${CROSSDIR}/usr/include
+	mkdir -p ${CROSSDIR}
 	echo _MACHINE_ARCH | \
 	    cat ${.CURDIR}/sys/arch/${TARGET}/include/param.h - | \
-	    ${CPP} -E |sed -n '$$p' >${CROSSDIR}/TARGET_ARCH
+	    ${CPP} -E -I${.CURDIR}/sys/arch | \
+	    sed -n '$$p' >${CROSSDIR}/TARGET_ARCH
+# GROSS KLUDGE  MACHINE_ARCH is mips, but we use mipsel for gnu tools.
+.if ${TARGET} == "arc" || ${TARGET} == "pmax"
 	eval `grep '^osr=' sys/conf/newvers.sh`; \
+	   sed "s/\$$/el-unknown-openbsd$$osr/" ${CROSSDIR}/TARGET_ARCH > \
+	   ${CROSSDIR}/TARGET_CANON
+.else
+	eval `grep '^osr=' sys/conf/newvers.sh`; \
 	   sed "s/\$$/-unknown-openbsd$$osr/" ${CROSSDIR}/TARGET_ARCH > \
 	   ${CROSSDIR}/TARGET_CANON
+.endif
 
-cross-includes:
-	${MAKE} MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` \
-	    DESTDIR=${CROSSDIR} includes
+cross-dirs:	${CROSSDIR}/stamp.dirs
+	@-mkdir -p ${CROSSDIR}
+	@-mkdir -p ${CROSSDIR}/usr/obj
+	@-mkdir -p ${CROSSDIR}/usr/bin
+	@-mkdir -p ${CROSSDIR}/usr/include
+	@-mkdir -p ${CROSSDIR}/usr/lib
+	@-mkdir -p ${CROSSDIR}/var/db
+	@-mkdir -p ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`
+	@ln -sf ${CROSSDIR}/usr/include \
+		${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/include
+	@ln -sf ${CROSSDIR}/usr/lib \
+	    ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/lib
+	@-mkdir -p ${CROSSDIR}/usr/obj
+	@-mkdir -p ${CROSSDIR}/usr/bin
+	@-mkdir -p ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin
 
-cross-binutils:
-	-mkdir -p ${CROSSDIR}/usr/obj
+${CROSSDIR}/stamp.dirs:
+	@touch ${CROSSDIR}/stamp.dirs
+
+cross-includes:	cross-dirs
+	export MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH` ;\
+	    ${MAKE} DESTDIR=${CROSSDIR} includes
+
+.if ${TARGET} == "powerpc" || ${TARGET} == "alpha" || ${TARGET} == "arc" || \
+    ${TARGET} == "pmax" || ${TARGET} == "wgrisc" || ${TARGET} == "hppa"
+cross-binutils: cross-binutils-new
+.else
+cross-binutils: cross-binutils-old
+.endif
+
+cross-binutils-new:	cross-dirs
 	export BSDSRCDIR=`pwd`; \
 	    (cd ${.CURDIR}/gnu/usr.bin/binutils; \
 	    BSDOBJDIR=${CROSSDIR}/usr/obj \
 	    MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
 	    ${MAKE} -f Makefile.bsd-wrapper obj); \
 	    (cd ${CROSSDIR}/usr/obj/gnu/usr.bin/binutils; \
-	    ${BSDSRCDIR}/gnu/usr.bin/binutils/configure \
+	    /bin/sh ${BSDSRCDIR}/gnu/usr.bin/binutils/configure \
 	    --prefix ${CROSSDIR}/usr \
 	    --target `cat ${CROSSDIR}/TARGET_CANON` && \
-	    ${MAKE} && ${MAKE} install)
+	    ${MAKE} CFLAGS=${CFLAGS} && ${MAKE} DESTDIR=${CROSSDIR} install)
 	${INSTALL} -c -o ${BINOWN} -g ${BINGRP} -m 755 \
-	    ${.CURDIR}/usr.bin/lorder/lorder.sh.gnm \
+	    ${.CURDIR}/usr.bin/lorder/lorder.sh \
 	    ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-lorder
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-as \
+	    ${CROSSDIR}/usr/bin/as
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-ar \
+	    ${CROSSDIR}/usr/bin/ar
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-ld \
+	    ${CROSSDIR}/usr/bin/ld
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-strip \
+	    ${CROSSDIR}/usr/bin/strip
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-size \
+	    ${CROSSDIR}/usr/bin/size
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-ranlib \
+	    ${CROSSDIR}/usr/bin/ranlib
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-nm \
+	    ${CROSSDIR}/usr/bin/nm
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-strings \
+	    ${CROSSDIR}/usr/bin/strings
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-lorder \
+	    ${CROSSDIR}/usr/bin/lorder
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-objcopy \
+	    ${CROSSDIR}/usr/bin/objcopy
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-objdump \
+	    ${CROSSDIR}/usr/bin/objdump
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-gdb \
+	    ${CROSSDIR}/usr/bin/gdb
 
-cross-gcc:
-	-mkdir -p ${CROSSDIR}/usr/obj
-	(cd gnu/usr.bin/gcc; \
+cross-binutils-old: cross-gas cross-ar cross-ld cross-strip cross-size \
+	cross-ranlib cross-nm
+
+cross-gas:	cross-dirs
+	(cd ${.CURDIR}/gnu/usr.bin/gas; \
+	    BSDOBJDIR=${CROSSDIR}/usr/obj \
+	    BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} obj; \
+	    TARGET_MACHINE_ARCH=${TARGET} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE}; \
+	    TARGET_MACHINE_ARCH=${TARGET} \
+	    DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} NOMAN= install)
+	ln -sf ${CROSSDIR}/usr/bin/as \
+	    ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/as
+
+cross-ld:	cross-dirs
+	(cd ${.CURDIR}/gnu/usr.bin/ld; \
+	    BSDOBJDIR=${CROSSDIR}/usr/obj \
+	    BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} obj; \
+	    TARGET_MACHINE_ARCH=${TARGET} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} NOMAN=; \
+	    TARGET_MACHINE_ARCH=${TARGET} \
+	    DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} NOMAN= install)
+	ln -sf ${CROSSDIR}/usr/bin/ld \
+	    ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/ld
+
+cross-ar:	cross-dirs
+	(cd ${.CURDIR}/usr.bin/ar; \
+	    BSDOBJDIR=${CROSSDIR}/usr/obj \
+	    BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} obj; \
+	    MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} NOMAN=; \
+	    DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} NOMAN= install)
+	ln -sf ${CROSSDIR}/usr/bin/ar \
+	    ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/ar
+
+cross-ranlib:	cross-dirs
+	(cd ${.CURDIR}/usr.bin/ranlib; \
+	    BSDOBJDIR=${CROSSDIR}/usr/obj \
+	    BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} obj; \
+	    MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} NOMAN=; \
+	    DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} NOMAN= install)
+	ln -sf ${CROSSDIR}/usr/bin/ranlib \
+	    ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/ranlib
+
+cross-strip:	cross-dirs
+	(cd ${.CURDIR}/usr.bin/strip; \
+	    BSDOBJDIR=${CROSSDIR}/usr/obj \
+	    BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} obj; \
+	    MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} TARGET_MACHINE_ARCH=${TARGET} NOMAN=; \
+	    DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} TARGET_MACHINE_ARCH=${TARGET} NOMAN= install)
+	ln -sf ${CROSSDIR}/usr/bin/strip \
+	    ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/strip
+
+cross-size:	cross-dirs
+	(cd ${.CURDIR}/usr.bin/size; \
+	    BSDOBJDIR=${CROSSDIR}/usr/obj \
+	    BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} obj; \
+	    MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} TARGET_MACHINE_ARCH=${TARGET} NOMAN=; \
+	    DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} NOMAN= install)
+	ln -sf ${CROSSDIR}/usr/bin/size \
+	    ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/size
+
+cross-nm:	cross-dirs
+	(cd ${.CURDIR}/usr.bin/nm; \
+	    BSDOBJDIR=${CROSSDIR}/usr/obj \
+	    BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} obj; \
+	    MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} TARGET_MACHINE_ARCH=${TARGET} NOMAN=; \
+	    DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} NOMAN= install)
+	ln -sf ${CROSSDIR}/usr/bin/nm \
+	    ${CROSSDIR}/usr/`cat ${CROSSDIR}/TARGET_CANON`/bin/nm
+
+cross-gcc:	cross-dirs
+	cd ${.CURDIR}/gnu/egcs/gcc; \
 	    BSDOBJDIR=${CROSSDIR}/usr/obj BSDSRCDIR=${.CURDIR} \
 	    MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
-	    ${MAKE} -f Makefile.bsd-wrapper obj)
-	(cd ${CROSSDIR}/usr/obj/gnu/usr.bin/gcc; \
-	    ${.CURDIR}/gnu/usr.bin/gcc/configure \
+	    ${MAKE} -f Makefile.bsd-wrapper obj
+	(cd ${CROSSDIR}/usr/obj/gnu/egcs/gcc; \
+	    /bin/sh ${.CURDIR}/gnu/egcs/gcc/configure \
 	    --prefix ${CROSSDIR}/usr \
 	    --target `cat ${CROSSDIR}/TARGET_CANON` && \
-	    ${MAKE} BISON=yacc LANGUAGES=c \
+	    ${MAKE} BISON=yacc LANGUAGES=c LDFLAGS=${LDSTATIC} \
+	    build_infodir=. \
 	    GCC_FOR_TARGET="./xgcc -B./ -I${CROSSDIR}/usr/include" && \
-	    ${MAKE} LANGUAGES=c install)
+	    ${MAKE} BISON=yacc LANGUAGES=c LDFLAGS=${LDSTATIC} \
+	    GCC_FOR_TARGET="./xgcc -B./ -I${CROSSDIR}/usr/include" \
+	    build_infodir=. INSTALL_MAN= INSTALL_HEADERS_DIR= install)
+	ln -sf ${CROSSDIR}/usr/bin/`cat ${CROSSDIR}/TARGET_CANON`-gcc \
+	    ${CROSSDIR}/usr/bin/cc
+	CPP=`${CROSSDIR}/usr/bin/cc -print-libgcc-file-name | \
+	    sed 's/libgcc\.a/cpp/'`; \
+	    sed -e 's#/usr/libexec/cpp#'$$CPP'#' \
+	    -e 's#/usr/include#${CROSSDIR}/usr/include#' \
+	    ${.CURDIR}/usr.bin/cpp/cpp.sh > ${CROSSDIR}/usr/bin/cpp
+	chmod ${BINMODE} ${CROSSDIR}/usr/bin/cpp
+	chown ${BINOWN}.${BINGRP} ${CROSSDIR}/usr/bin/cpp
+
+# XXX MAKEOBJDIR maybe should be obj.${TARGET} here, revisit later
+cross-lib:	cross-dirs
+	MACHINE=${TARGET} MACHINE_ARCH=`cat ${CROSSDIR}/TARGET_ARCH`; \
+	export MACHINE MACHINE_ARCH; \
+	(cd ${.CURDIR}/lib; \
+	    BSDOBJDIR=${CROSSDIR}/usr/obj \
+	    BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} obj; \
+	    for lib in csu libc; do \
+		(cd $$lib; \
+		    ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+		    ${MAKE} NOMAN= depend; \
+		    ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+		    ${MAKE} NOMAN=; \
+		    ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+		    DESTDIR=${CROSSDIR} ${MAKE} NOMAN= install); \
+	    done; \
+	    ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} NOMAN= depend; \
+	    ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} ${MAKE} NOMAN=; \
+	    ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    DESTDIR=${CROSSDIR} SKIPDIR=libocurses/PSD.doc \
+	    ${MAKE} NOMAN= install)
+.if (${KERBEROS} == "yes")
+	(cd kerberosIV; \
+	    BSDOBJDIR=${CROSSDIR}/usr/obj \
+	    BSDSRCDIR=${.CURDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+	    ${MAKE} obj; \
+	    for lib in acl krb kadm kafs kdb; do \
+		(cd $$lib; \
+		    ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+		    ${MAKE} NOMAN= depend; \
+		    ${CROSSENV} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+		    ${MAKE} NOMAN=; \
+		    DESTDIR=${CROSSDIR} MAKEOBJDIR=obj.${MACHINE}.${TARGET} \
+		    ${MAKE} NOMAN= install); \
+	    done)
+.endif
 .endif
 
 .include <bsd.subdir.mk>