version 1.52, 2011/06/24 19:47:48 |
version 1.53, 2012/05/31 15:04:03 |
|
|
#net.inet6.ip6.mforwarding=1 # 1=Permit forwarding (routing) of IPv6 multicast packets |
#net.inet6.ip6.mforwarding=1 # 1=Permit forwarding (routing) of IPv6 multicast packets |
#net.inet6.ip6.multipath=1 # 1=Enable IPv6 multipath routing |
#net.inet6.ip6.multipath=1 # 1=Enable IPv6 multipath routing |
#net.inet6.ip6.accept_rtadv=1 # 1=Permit IPv6 autoconf (forwarding must be 0) |
#net.inet6.ip6.accept_rtadv=1 # 1=Permit IPv6 autoconf (forwarding must be 0) |
|
#net.inet.tcp.always_keepalive=1 # 1=Keepalives for all connections (e.g. hotel/airport NAT) |
|
#net.inet.tcp.keepidle=100 # 100=send TCP keepalives every 50 seconds |
#net.inet.tcp.rfc1323=0 # 0=Disable TCP RFC1323 extensions (for if tcp is slow) |
#net.inet.tcp.rfc1323=0 # 0=Disable TCP RFC1323 extensions (for if tcp is slow) |
#net.inet.tcp.rfc3390=0 # 0=Disable RFC3390 for TCP window increasing |
#net.inet.tcp.rfc3390=0 # 0=Disable RFC3390 for TCP window increasing |
#net.inet.esp.enable=0 # 0=Disable the ESP IPsec protocol |
#net.inet.esp.enable=0 # 0=Disable the ESP IPsec protocol |