Annotation of src/etc/MAKEDEV.common, Revision 1.90
1.90 ! goda 1: vers(a, {-$OpenBSD: MAKEDEV.common,v 1.89 2016/05/26 16:29:51 deraadt Exp $-})dnl
1.24 todd 2: dnl
3: dnl Copyright (c) 2001-2006 Todd T. Fries <todd@OpenBSD.org>
4: dnl
5: dnl Permission to use, copy, modify, and distribute this software for any
6: dnl purpose with or without fee is hereby granted, provided that the above
7: dnl copyright notice and this permission notice appear in all copies.
8: dnl
9: dnl THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10: dnl WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11: dnl MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12: dnl ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13: dnl WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
14: dnl ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
15: dnl OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
1.1 miod 16: dnl
17: dnl Common device definitions.
18: dnl
19: dnl This file contains the MI device definitions (as well as some MD
20: dnl definitions not cleaned up yet...)
21: dnl
22: dnl Diversions: (upon termination, concatenated output queues)
23: dnl
24: dnl 0 - very top
25: dnl 1 - descriptions of devices
26: dnl 2 - init of script, function definitions, etc
27: dnl 3 - beginning of global recursive R() function
28: dnl 7 - body of MAKEDEV, device creations, etc
29: dnl 9 - end
30: dnl
31: dnl Diversions 2, 3 and 7 are not filled when generating the manual page.
32: dnl
33: dnl HOW TO ADD A DEVICE:
34: dnl
35: dnl In this file, you must use at least two macros:
36: dnl
37: dnl Use '__devitem(uniqueid, name-pattern, description)' to create an entry
38: dnl in the description at the top of the generated MAKEDEV file:
39: dnl
40: dnl __devitem(sca, sca*, Sugar Generic device)dnl
41: dnl __devitem(cry, crypto, hardware crypto access driver)dnl
42: dnl
43: dnl This is ultimately shown as:
44: dnl
45: dnl # sca* Sugar Generic device
46: dnl # crypto hardware crypto access driver
47: dnl
48: dnl Use '_mkdev(uniqueid, shell-pattern, {-shell-script-})dnl' to create
49: dnl a shell script fragment used to 'create' the device (be sure to match
50: dnl the uniqueid from above):
51: dnl
52: dnl _mkdev(sca, sca*, {-M sca$U c major_sca_c $U
53: dnl M rsca$U b major_sca_b Add($U, 128)-})dnl
54: dnl _mkdev(cry, crypto, {-M crypto c major_cry_c 0-})dnl
55: dnl
56: dnl This is ultimately expanded into:
57: dnl
58: dnl sca*)
59: dnl M sca$U c 24 $U
60: dnl M sca$U b 42 $(($U+128))
61: dnl ;;
62: dnl
63: dnl crypto)
64: dnl M crypto c 47 0
65: dnl ;;
66: dnl
67: dnl In the MAKEDEV.md file, add a '_DEV(uniqueid, charmajor, blockmajor)'
68: dnl entry:
69: dnl
70: dnl _DEV(sca, 24, 42)
71: dnl _DEV(cry, 47)
72: dnl
73: dnl Final step is to use the 'target/twrget' macros to have the 'all)' target
74: dnl generate one or more device(s). Usage of 'target/twrget' is:
75: dnl target(target_name, device_name [, append_string ] .. )
76: dnl twrget(target_name, uniqueid, device_name, [, append_string ] .. )
77: dnl
78: dnl target_name a unique name that later is used as an argument to
79: dnl 'show_target()' (which expands all devices for a
80: dnl given 'target_name').
81: dnl uniqueid same as 'uniqueid' above
82: dnl device_name string representing the device to be mknod'ed
83: dnl append_string for each append_string, `device_name' is prepended
84: dnl
85: dnl Note: 'target(a,b,c)' is equivalent to 'twrget(a,b,b,c)'
86: dnl
87: dnl
88: dnl For a short example:
89: dnl
90: dnl target(all, std)dnl
91: dnl target(all, sca, 0, 1, 2, 3)dnl
92: dnl twrget(all, cry, crypto)dnl
93: dnl
94: dnl would expand to:
95: dnl
96: dnl all)
97: dnl R std sca0 sca1 sca2 sca3 crypto
98: dnl ;;
99: dnl
100: dnl presuming '_DEV(sca, ?, ?)' and '_DEV(std)' were in the MAKEDEV.md file.
101: dnl
102: dnl
103: dnl Everything is 'automatically' added to 'MAKEDEV' based on whether or
104: dnl not the '_DEV()' entry has a corresponding _mkdev() and __devitem()
105: dnl entry in MAKEDEV.mi (this file).
106: dnl
107: dnl Note: be very wary of adding whitespace, carriage returns, or not
108: dnl finishing a macro with ')dnl' .. otherwise, extra blank lines show up
109: dnl in the output.
110: dnl
111: dnl TODO:
112: dnl
113: dnl make a 'disktgt' macro that automatically does:
114: dnl disktgt(rd, {-rd-})
115: dnl
116: dnl target(all,rd,0)
117: dnl target(ramd,rd,0)
118: dnl disk_q(rd)
119: dnl __devitem(rd, {-rd*-}, {-rd-})dnl
120: dnl
1.58 miod 121: dnl Note: not all devices are generated in 'all)' below. MAKEDEV.md contains
122: dnl its own extra list.
1.1 miod 123: dnl
1.24 todd 124: divert(1)dnl
1.1 miod 125: twrget(all, fdesc, fd)dnl
126: target(all, st, 0, 1)dnl
127: target(all, std)dnl
128: target(all, ra, 0, 1, 2, 3)dnl
129: target(all, rx, 0, 1)dnl
130: target(all, wd, 0, 1, 2, 3)dnl
131: target(all, xd, 0, 1, 2, 3)dnl
132: target(all, pctr)dnl
133: target(all, pctr0)dnl
134: target(all, pf)dnl
135: target(all, apm)dnl
1.18 tholo 136: target(all, acpi)dnl
1.1 miod 137: twrget(all, tth, ttyh, 0, 1)dnl
138: target(all, ttyA, 0, 1)dnl
139: target(all, ttyB, 0, 1, 2, 3, 4, 5)dnl
140: twrget(all, attyB, ttyB, 0, 1, 2, 3, 4)dnl
141: twrget(all, mac_tty0, tty0, 0, 1)dnl
142: twrget(all, tzs, tty, a, b, c, d)dnl
143: twrget(all, czs, cua, a, b, c, d)dnl
144: target(all, ttyc, 0, 1, 2, 3, 4, 5, 6, 7)dnl
1.68 naddy 145: twrget(all, com, tty0, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b)dnl
1.1 miod 146: twrget(all, mmcl, mmclock)dnl
147: target(all, lpt, 0, 1, 2)dnl
148: twrget(all, lpt, lpa, 0, 1, 2)dnl
149: target(all, joy, 0, 1)dnl
150: twrget(all, rnd, random)dnl
151: target(all, uk, 0)dnl
1.50 mglocker 152: twrget(all, vi, video, 0, 1)dnl
1.1 miod 153: twrget(all, speak, speaker)dnl
154: target(all, asc, 0)dnl
155: target(all, radio, 0)dnl
156: target(all, tuner, 0)dnl
157: target(all, rmidi, 0, 1, 2, 3, 4, 5, 6, 7)dnl
1.4 deraadt 158: target(all, uall)dnl
1.31 kettenis 159: target(all, pci, 0, 1, 2, 3)dnl
1.1 miod 160: twrget(all, wsmouse, wscons)dnl
161: target(all, par, 0)dnl
162: target(all, apci, 0)dnl
163: target(all, local)dnl
164: target(all, gpr, 0)dnl
165: target(all, ptm)dnl
1.9 grange 166: target(all, hotplug)dnl
1.61 yasuoka 167: target(all, pppx)dnl
1.66 syl 168: target(all, fuse)dnl
1.80 sthen 169: target(all, vmm)dnl
1.84 reyk 170: target(all, pvbus, 0)dnl
1.87 natano 171: target(all, bpf)dnl
1.1 miod 172: dnl
173: _mkdev(all, {-all-}, {-dnl
174: show_target(all)dnl
175: -})dnl
176: dnl
177: dnl XXX some arches use ramd, others ramdisk - needs to be fixed eventually
1.3 miod 178: __devitem(ramdisk, ramdisk, Ramdisk kernel devices,nothing)dnl
1.1 miod 179: dnl
1.51 miod 180: target(usb, usb, 0, 1, 2, 3, 4, 5, 6, 7)dnl
1.1 miod 181: target(usb, uhid, 0, 1, 2, 3)dnl
182: target(usb, ulpt, 0, 1)dnl
1.71 dcoppa 183: target(usb, ugen, 0, 1, 2, 3, 4, 5, 6, 7)dnl
1.30 todd 184: target(usb, ttyU, 0, 1, 2, 3)dnl
1.1 miod 185: dnl
1.4 deraadt 186: __devitem({-uall-}, uall, All USB devices,usb)dnl
187: _mkdev(uall, uall, {-dnl
1.1 miod 188: show_target({-usb-})dnl
189: -})dnl
190: __devtitle(tap, Tapes)dnl
191: __devitem(tz, tz*, {-DEC TK50 cartridge tape drives-})dnl
192: __devitem(st, {-st*-}, SCSI tape drives)dnl
193: _mkdev(st, st*, {-n=Mult($U, 16)
194: for pre in " " n e en
195: do
196: M ${pre}st$U b major_st_b $n 660 operator
197: M ${pre}rst$U c major_st_c $n 660 operator
198: n=Add($n, 1)
199: done-})dnl
200: __devitem(mt, mt*, (Magnetic) 9-track reel tape drives)dnl
201: __devtitle(dis, Disks)dnl
1.3 miod 202: __devitem(sd, {-sd*-}, {-SCSI disks{-,-} including flopticals-})dnl
203: __devitem(cd, {-cd*-}, ATAPI and SCSI CD-ROM drives)dnl
1.1 miod 204: _mkdev(cd, cd*, {-dodisk2 cd $U major_cd_b major_cd_c $U 0{--}ifstep(cd)-})dnl
1.66 syl 205: __devitem(fuse, fuse, Userland Filesystem, fuse 4)dnl
206: _mcdev(fuse, fuse, fuse, {-major_fuse_c-}, 600)dnl
1.1 miod 207: __devitem(ch, {-ch*-}, SCSI media changers)dnl
208: _mcdev(ch, ch*, ch, {-major_ch_c-}, 660, operator)dnl
1.12 miod 209: __devitem(uk, uk*, Unknown SCSI devices)dnl
1.1 miod 210: _mcdev(uk, uk*, uk, {-major_uk_c-}, 640, operator)dnl
211: dnl XXX see ramdisk above
1.3 miod 212: __devitem(ramd, ramdisk, Ramdisk kernel devices,nothing)dnl
1.25 todd 213: dnl
1.1 miod 214: _mkdev(ramd, ramdisk, {-dnl
215: show_target(ramd)dnl
216: -})dnl
1.25 todd 217: dnl
1.1 miod 218: target(ramd, std)dnl
1.87 natano 219: target(ramd, bpf)dnl
1.25 todd 220: twrget(ramd, com, tty0, 0, 1)dnl
1.26 todd 221: target(ramd, sd, 0, 1, 2, 3, 4)dnl
222: target(ramd, wd, 0, 1, 2, 3, 4)dnl
223: target(ramd, st, 0, 1)dnl
224: target(ramd, cd, 0, 1)dnl
225: target(ramd, rd, 0)dnl
1.25 todd 226: dnl
1.1 miod 227: __devitem(rd, {-rd*-}, quote(rd)pseudo-disks)dnl
228: _mkdev(rd, rd*, {-dodisk2 rd $U major_rd_b major_rd_c $U 0{--}ifstep(rd)-})dnl
229: __devitem(xd, xd*, Xylogic 753/7053 disks)dnl
230: __devitem(xy, xy*, {- Xylogic 450/451 disks-})dnl
1.3 miod 231: __devitem(flo, {-fd*-}, {-Floppy disk drives (3 1/2"{-,-} 5 1/4")-},fd)dnl
1.1 miod 232: _mkdev(flo, fd*,
233: {-typnam=$U${i#fd[01]*}
234: case $typnam in
235: 0|1) typnum=0;; # no type specified, assume A
236: *A) typnum=0; typnam=0;;
237: *B) typnum=1;;
238: *C) typnum=2;;
239: *D) typnum=3;;
240: *E) typnum=4;;
241: *F) typnum=5;;
242: *G) typnum=6;;
243: *H) typnum=7;;
244: *) echo bad type $typnam for $i; exit 1;;
245: esac
246: case $U in
247: 0|1) blk=major_flo_b; chr=major_flo_c;;
248: *) echo bad unit $U for $i; exit 1;;
249: esac
250: nam=fd${typnam}
251: n=Add(Mult($U, 128), Mult($typnum, 16))
252: M ${nam}a b $blk $n 640 operator
253: M ${nam}b b $blk Add($n, 1) 640 operator
254: M ${nam}c b $blk Add($n, 2) 640 operator
1.32 deraadt 255: M ${nam}i b $blk Add($n, 8) 640 operator
1.1 miod 256: M r${nam}a c $chr $n 640 operator
257: M r${nam}b c $chr Add($n, 1) 640 operator
1.32 deraadt 258: M r${nam}c c $chr Add($n, 2) 640 operator
259: M r${nam}i c $chr Add($n, 8) 640 operator-}, 664)dnl
1.3 miod 260: __devitem(wd, {-wd*-}, {-quote(winchester)disk drives (ST506{-,-} IDE{-,-} ESDI{-,-} RLL{-,-} ...)-})dnl
1.1 miod 261: __devitem(vnd, vnd*, quote(file)pseudo-disk devices)dnl
1.54 thib 262: _mkdev(vnd, vnd*, {-dodisk vnd $U major_vnd_b major_vnd_c $U 0{--}ifstep(vnd)-})dnl
1.1 miod 263: __devitem(ra, ra*, {-MSCP disks-})dnl
264: __devitem(rx, rx*, {-RX02 floppy disks-})dnl
265: dnl
266: dnl For normal disk devices, add a disk_q entry; anything else define like
267: dnl the rest (such as vnd above).
268: dnl
269: disk_q({-hd-})dnl
270: disk_q({-ra-})dnl
271: disk_q({-rx-})dnl
272: disk_q({-sd-})dnl
273: disk_q({-xy-})dnl
274: disk_q({-xd-})dnl
275: disk_q({-wd-})dnl
276: _mkdev({-disks-}, {-undefine({-C_ase-})show_disks()undefine({-C_ase-})-},
277: {-case $i in
278: show_disks2()dnl
279: esac-})dnl
280: __mkdev({-disks-}){--}dnl
281: dnl
282: __devtitle(cons, Console ports)dnl
1.23 miod 283: __devitem(wscons, wscons, Minimal wscons devices)dnl
1.1 miod 284: twrget(wscons, wscons, ttyC, cfg, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b)dnl
285: target(wscons, wsmux)dnl
286: target(wscons, wskbd, 0, 1, 2, 3)dnl
287: target(wscons, wsmouse, 0, 1, 2, 3)dnl
288: _mkdev({-wscons-}, {-wscons-}, {-dnl
289: show_target(wscons)dnl
290: -})dnl
1.29 tsi 291: __devitem(wsdisp, ttyC-J*, wscons display devices,wsdisplay)dnl
292: _mkdev({-wsdisp-}, tty[C-J]*, {-U=${i##tty[C-J]}
1.1 miod 293: case $i in
294: ttyC*) n=C m=expr(0*256);;
295: ttyD*) n=D m=expr(1*256);;
296: ttyE*) n=E m=expr(2*256);;
297: ttyF*) n=F m=expr(3*256);;
1.29 tsi 298: ttyG*) n=G m=expr(4*256);;
299: ttyH*) n=H m=expr(5*256);;
300: ttyI*) n=I m=expr(6*256);;
301: ttyJ*) n=J m=expr(7*256);;
1.1 miod 302: esac
303: case $U in
1.15 danh 304: [0-9a-f]) M tty$n$U c major_wsdisp_c Add(16#$U, $m) 600;;
1.1 miod 305: cfg) M tty${n}cfg c major_wsdisp_c Add(255,$m) 600;;
306: *) echo bad unit $U for $i; exit 1;;
307: esac-})dnl
308: __devitem(wskbd, wskbd*, wscons keyboards)dnl
1.46 miod 309: dnl XXX wskbd[0-9]* instead of wskbd* in case this appears before
310: dnl XXX ``wsmux|wsmouse|wskbd'' in the final MAKEDEV.
311: _mkdev(wskbd, wskbd[0-9]*, {-M wskbd$U c major_wskbd_c $U 600-})dnl
1.1 miod 312: __devitem(wsmux, wsmux, wscons keyboard/mouse mux devices)dnl
313: _mkdev(wsmux, wsmux|wsmouse|wskbd, {-M wsmouse c major_wsmux_c 0 600
314: M wskbd c major_wsmux_c 1 600-})dnl
315: __devitem(pcons, console, PROM console)dnl
316: __devtitle(point, Pointing devices)dnl
317: __devitem(wsmouse, wsmouse*, wscons mice)dnl
1.46 miod 318: dnl XXX wsmouse[0-9]* instead of wsmouse* in case this appears before
319: dnl XXX ``wsmux|wsmouse|wskbd'' in the final MAKEDEV.
320: _mkdev(wsmouse, wsmouse[0-9]*, {-M wsmouse$U c major_wsmouse_c $U 600-})dnl
1.1 miod 321: __devtitle(pty, Pseudo terminals)dnl
322: __devitem(ptm, ptm, pty master device)dnl
323: _mkdev(ptm, ptm, {-M ptm c major_ptm_c 0 666-})dnl
1.7 millert 324: __devitem(tty, tty*, Set of 62 slave pseudo terminals)dnl
325: __devitem(pty, pty*, Set of 62 master pseudo terminals)dnl
1.1 miod 326: _mkdev(pty, pty*, {-if [ $U -gt 15 ]; then
327: echo bad unit for pty in: $i
328: continue
329: fi
1.6 millert 330: set -A letters p q r s t u v w x y z P Q R S T
331: set -A suffixes 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q \
332: r s t u v w x y z A B C D E F G H I J K L M N O P Q R S T U V W X \
333: Y Z
334:
335: name=${letters[$U]}
1.1 miod 336: n=0
1.6 millert 337: while [ $n -lt 62 ]
1.1 miod 338: do
1.6 millert 339: nam=$name${suffixes[$n]}
340: off=Mult($U, 62)
1.1 miod 341: M tty$nam c major_tty_c Add($off, $n)
342: M pty$nam c major_pty_c Add($off, $n)
343: n=Add($n, 1)
344: done-})dnl
345: __devitem(dc, dc*, {-4 channel serial interface (keyboard{-,-} mouse{-,-}modem{-,-} printer)-})dnl
1.38 todd 346: __devitem(drm, drm*, {-Direct Rendering Manager-})dnl
1.73 kettenis 347: _mcdev({-drm-}, drm*, {-drm-}, {-major_drm_c-}, 600)dnl
1.1 miod 348: __devtitle(prn, Printers)dnl
349: __devitem(lpt, lpt*, IEEE 1284 centronics printer)dnl
350: _mkdev(lpt, lpt*|lpa*,
351: {-case $i in
352: lpt*) n=lpt f=0;;
353: lpa*) n=lpa f=128;;
354: esac
355: M $n$U c major_lpt_c Add($U, $f) 600-})dnl
1.3 miod 356: __devitem(lpa, lpa*, Polled printer port,lpt)dnl
1.1 miod 357: __devtitle({-usb-}, USB devices)dnl
358: __devitem({-usb-}, usb*, Bus control devices used by usbd for attach/detach)dnl
359: _mkdev({-usb-}, usb*, {-[ "$i" = "usb" ] && u= || u=$U
360: M usb$u c major_usb_c $U 660-})dnl
361: __devitem(uhid, uhid*, Generic HID devices)dnl
362: _mcdev({-uhid-}, uhid*, {-uhid-}, {-major_uhid_c-}, 660)dnl
363: __devitem(ulpt, ulpt*, Printer devices)dnl
364: _mcdev({-ulpt-}, ulpt*, {-ulpt-}, {-major_ulpt_c-}, 660)dnl
1.3 miod 365: __devitem(ttyU, ttyU*, USB serial ports,ucom)dnl
1.1 miod 366: _mkdev({-ttyU-}, {-ttyU[0-9a-zA-Z]-}, {-U=${i#ttyU*}
367: o=$(alph2d $U)
1.13 dlg 368: M ttyU$U c major_ttyU_c $o 660 dialer uucp
369: M cuaU$U c major_ttyU_c Add($o, 128) 660 dialer uucp-})dnl
1.1 miod 370: __devitem(ugen, ugen*, Generic USB devices)dnl
371: _mkdev(ugen, ugen*, {-n=Mult($U, 16)
1.15 danh 372: for j in 0{0,1,2,3,4,5,6,7,8,9} 1{0,1,2,3,4,5}
1.1 miod 373: do
1.15 danh 374: M ugen$U.$j c major_ugen_c Add($n, 10#$j) 660
1.1 miod 375: done-})dnl
376: __devtitle(call, Call units)dnl
377: __devtitle(term, Terminal ports)dnl
378: __devitem(dca, dca*, HP200/300 single port serial interface)dnl
379: __devitem(dcm, dcm*, HP200/300 4 port serial mux interface)dnl
380: __devitem(apci, apci*, HP400 4 port serial mux interface)dnl
381: __devitem({-com-}, {-tty[0-7][0-9a-f]-}, NS16x50 serial ports)dnl
382: _mkdev(com, {-tty[0-7][0-9a-f]-}, {-U=${i#tty*}
383: o=$(h2d $U)
384: M tty$U c major_com_c $o 660 dialer uucp
385: M cua$U c major_com_c Add($o, 128) 660 dialer uucp-})dnl
1.3 miod 386: __devitem(ttyc, ttyc*, Cyclades serial ports,cy)dnl
1.83 sf 387: __devitem(ttyVI, ttyVI*, Virtio serial ports,viocon)dnl
388: _mkdev(ttyVI, ttyVI*, {-M ttyVI$U c major_ttyVI_c $U 660 dialer uucp-})dnl
1.3 miod 389: __devitem(tzs, tty[a-z]*, Zilog 8530 Serial Port,zs)dnl
1.1 miod 390: _mkdev(tzs, {-tty[a-z]-}, {-u=${i#tty*}
391: case $u in
392: a) n=0 ;;
393: b) n=1 ;;
394: c) n=4 ;;
395: d) n=5 ;;
396: *) echo unknown tty device $i ;;
397: esac
398: M tty$u c major_tzs_c $n 660 dialer uucp-})dnl
1.3 miod 399: __devitem(tth, ttyh*, Sab82532 serial devices,sab)dnl
1.1 miod 400: _mkdev(tth, ttyh*, {-M ttyh$U c major_tth_c $U 660 dialer uucp-})dnl
1.3 miod 401: __devitem(czs, cua[a-z]*, Zilog 8530 Serial Port,zs)dnl
1.1 miod 402: _mkdev(czs, cua[a-z], {-u=${i#cua*}
403: case $u in
404: a) n=0 ;;
405: b) n=1 ;;
406: c) n=4 ;;
407: d) n=5 ;;
408: *) echo unknown cua device $i ;;
409: esac
410: M cua$u c major_czs_c Add($n, 128) 660 dialer uucp-})dnl
1.3 miod 411: __devitem(tty0, tty00, Standard serial port,com)dnl
412: __devitem(mac_tty0, tty00, Standard serial port,zsc)dnl
413: __devitem(ttyz, tty[a-d], On-board zs serial ports,zs)dnl
414: __devitem(cuaz, cua[a-d], On-board zs serial ports,zs)dnl
415: __devitem(ttyB, ttyB?, DEC 3000 ZS8530 ("scc") serial ports,scc)dnl
416: __devitem(scc, scc*, 82530 serial interface,scc)dnl
1.1 miod 417: __devtitle(spec, Special purpose devices)dnl
418: _mkdev(apm, apm*, {-M apm c major_apm_c 0 644
419: M apmctl c major_apm_c 8 644-})dnl
1.18 tholo 420: _mkdev(acpi, acpi*, {-M acpi c major_acpi_c 0 644-})dnl
1.1 miod 421: __devitem(pctr, pctr*, PC Performance Tuning Register access device)dnl
422: _mkdev(pctr, pctr, {-M pctr c major_pctr_c 0 644-})dnl
1.3 miod 423: __devitem(au, audio*, Audio devices,audio)dnl
1.1 miod 424: _mkdev(au, audio*, {-M sound$U c major_au_c $U
425: M mixer$U c major_au_c Add($U, 16)
426: M audio$U c major_au_c Add($U, 128)
427: M audioctl$U c major_au_c Add($U, 192)
1.21 otto 428: MKlist[${#MKlist[*]}]=";[ -e audio ] || ln -s audio$U audio"
429: MKlist[${#MKlist[*]}]=";[ -e mixer ] || ln -s mixer$U mixer"
430: MKlist[${#MKlist[*]}]=";[ -e sound ] || ln -s sound$U sound"
431: MKlist[${#MKlist[*]}]=";[ -e audioctl ] || ln -s audioctl$U audioctl"-})dnl
1.42 jmc 432: __devitem(vi, video*, Video V4L2 devices,video)dnl
1.89 deraadt 433: _mkdev(vi, video*, {-M video$U c major_vi_c $U 600
1.37 mglocker 434: MKlist[${#MKlist[*]}]=";[ -e video ] || ln -s video$U video"-})dnl
1.1 miod 435: __devitem(asc, asc*, ASC Audio device)dnl
436: _mkdev(asc, asc*, {-M asc$U major_asc_c 0-})dnl
1.19 todd 437: __devitem(bio, bio, {-ioctl tunnel pseudo-device-})dnl
438: _mkdev(bio, bio, {-M bio c major_bio_c 0 600-})dnl
1.1 miod 439: __devitem(radio, radio*, FM tuner devices)dnl
440: _mkdev(radio, radio*, {-M radio$U c major_radio_c $U
1.21 otto 441: MKlist[${#MKlist[*]}]=";[ -e radio ] || ln -s radio$U radio"-})dnl
1.23 miod 442: __devitem(fdesc, fd, fd/* nodes, fd)dnl
1.21 otto 443: _mkdev(fdesc, fd, {-RMlist[${#RMlist[*]}]=";mkdir -p fd;rm -f" n=0
1.1 miod 444: while [ $n -lt 64 ];do M fd/$n c major_fdesc_c $n;n=Add($n, 1);done
1.21 otto 445: MKlist[${#MKlist[*]}]=";chmod 555 fd"-})dnl
1.11 miod 446: __devitem(oppr, openprom,PROM settings,openprom)dnl
1.1 miod 447: _cdev(oppr, openprom, 70, 0)dnl
448: __devitem(pf, pf*, Packet Filter)dnl
449: _mkdev(pf, {-pf*-}, {-M pf c major_pf_c 0 600-})dnl
1.87 natano 450: __devitem(bpf, bpf, Berkeley Packet Filter)dnl
451: _mkdev(bpf, bpf, {-M bpf c major_bpf_c 0 600
452: M bpf0 c major_bpf_c 0 600-})dnl
1.1 miod 453: _mkdev(tun, {-tun*-}, {-M tun$U c major_tun_c $U 600-}, 600)dnl
1.79 claudio 454: _mkdev(tap, {-tap*-}, {-M tap$U c major_tap_c $U 600-}, 600)dnl
1.90 ! goda 455: _mkdev(switch, {-switch*-}, {-M switch$U c major_switch_c $U 600-}, 600)dnl
1.3 miod 456: __devitem(speak, speaker, PC speaker,spkr)dnl
1.1 miod 457: _mkdev(speak, speaker, {-M speaker c major_speak_c 0 600-})dnl
458: __devitem(tun, tun*, Network tunnel driver)dnl
1.79 claudio 459: __devitem(tap, tap*, Ethernet tunnel driver)dnl
1.90 ! goda 460: __devitem(switch, switch*, Switch driver)dnl
1.3 miod 461: __devitem(rnd, *random, In-kernel random data source,random)dnl
1.1 miod 462: _mkdev(rnd, *random, {-n=0
1.40 deraadt 463: for pre in " " s u a
1.1 miod 464: do
465: M ${pre}random c major_rnd_c $n 644
466: n=Add($n, 1)
467: done-}, 644)dnl
468: __devitem(joy, joy*, Joystick driver)dnl
469: _mcdev(joy, joy*, joy, {-major_joy_c-}, 666)dnl
1.3 miod 470: __devitem(mag, magma*, Magma multiport cards,magma)dnl
471: __devitem(bppmag, bppmag[mno], Magma parallel port,magma)dnl
1.1 miod 472: __devitem(spif, spif*, quote(spif)multiport cards)dnl
1.3 miod 473: __devitem(bppsp, bpp[jkl], quote(spif)parallel port,spif)dnl
1.1 miod 474: _mkdev(mag, magma*, {-case $U in
475: 0) offset=0 nam=m;;
476: 1) offset=16 nam=n;;
477: 2) offset=32 nam=o;;
478: *) echo "bad unit for $i: $U"; exit 127;;
479: esac
480: offset=Mult($U, 64)
481: n=0
482: while [ $n -lt 16 ]
483: do
484: name=${nam}`hex $n`
485: M tty$name c major_mag_c Add($offset, $n) 660 dialer uucp
486: n=Add($n, 1)
487: done
488: M bpp${nam}0 c major_bppmag_c Add($offset, 0) 600
489: M bpp${nam}1 c major_bppmag_c Add($offset, 1) 600-})dnl
490: _mkdev(spif, spif*, {-case $U in
491: 0) offset=0 nam=j;;
492: 1) offset=16 nam=k;;
493: 2) offset=32 nam=l;;
494: *) echo "bad unit for $i: $U"; exit 127;;
495: esac
496: offset=Mult($U, 64)
497: n=0
498: while [ $n -lt 8 ]
499: do
500: name=${nam}`hex $n`
501: M tty$name c major_spif_c Add($offset, $n) 660 dialer uucp
502: n=Add($n, 1)
503: done
504: M bpp${nam}0 c major_bppsp_c Add($offset, 0) 600-})dnl
505: __devitem(bpp, bpp*, Parallel port)dnl
506: _mkdev(bpp, {-bpp*-}, {-M bpp$U c major_bpp_c $U 600-}, 600)dnl
1.63 jmc 507: __devitem(vscsi, vscsi*, Virtual SCSI controller, vscsi 4)dnl
1.45 deraadt 508: _mcdev(vscsi, vscsi*, vscsi, {-major_vscsi_c-}, 600)dnl
1.3 miod 509: __devitem(rmidi, rmidi*, Raw MIDI devices,midi)dnl
1.1 miod 510: _mcdev(rmidi, rmidi*, rmidi, {-major_rmidi_c-}, 666)dnl
1.47 todd 511: __devitem(diskmap, diskmap, Disk mapper, diskmap)dnl
1.48 todd 512: _mkdev(diskmap, diskmap, {-M diskmap c major_diskmap_c 0 640 operator-})dnl
1.53 claudio 513: __devitem(pppx, pppx*, PPP Multiplexer, pppx 4)dnl
514: _mcdev(pppx, pppx*, pppx, {-major_pppx_c-}, 600)dnl
1.1 miod 515: __devtitle(plat, Platform-specific devices)dnl
516: __devitem(bktr, bktr*, Video frame grabbers)dnl
517: _mcdev(bktr, bktr*, bktr, {-major_bktr_c-}, 644)dnl
1.39 miod 518: __devitem(tuner, tuner*, Tuner devices, bktr)dnl
1.1 miod 519: _mkdev(tuner, tuner*, {-M tuner$U c major_bktr_c Add(Mult($U, 2), 16) 644-}, 644)dnl
1.31 kettenis 520: __devitem(pci, pci*, PCI bus devices)dnl
521: _mkdev(pci, pci*, {-M pci$U c major_pci_c $U 600
1.33 krw 522: MKlist[${#MKlist[*]}]=";[ -h pci ] || ln -sf pci0 pci"-})dnl
1.1 miod 523: __devitem(pdc, pdc, PDC device)dnl
524: __devitem(gpr, gpr*, GPR400 smartcard reader)dnl
525: _mcdev(gpr, gpr*, gpr, {-major_gpr_c-})dnl
1.9 grange 526: __devitem(hotplug, hotplug, devices hot plugging)dnl
527: _mkdev(hotplug, hotplug, {-M hotplug c major_hotplug_c $U 400-})dnl
1.85 uebayasi 528: __devitem(ipmi, ipmi*, IPMI BMC access)dnl
529: _mkdev(ipmi, ipmi*, {-M ipmi$U c major_ipmi_c $U 600-})dnl
1.10 grange 530: __devitem(gpio, gpio*, General Purpose Input/Output)dnl
531: _mcdev(gpio, gpio*, gpio, {-major_gpio_c-}, 600)dnl
1.81 sthen 532: __devitem(vmm, vmm, Virtual Machine Monitor)dnl
1.82 deraadt 533: _mkdev(vmm, vmm, {-M vmm c major_vmm_c 0 600-})dnl
1.84 reyk 534: __devitem(pvbus, pvbus*, paravirtual device tree root)dnl
535: _mkdev(pvbus, {-pvbus*-}, {-M pvbus$U c major_pvbus_c $U 640-}, 640)dnl
1.1 miod 536: _mkdev(local, local, {-test -s $T.local && sh $T.local-})dnl
![[BACK]](/icons/back.gif){kind=icon}
Return to MAKEDEV.common CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / src / etc