Annotation of src/etc/MAKEDEV.mi, Revision 1.20
1.1 todd 1: include(MAKEDEV.sub)dnl
2: dnl
1.20 ! todd 3: vers(a,{-$OpenBSD: MAKEDEV.mi,v 1.19 2002/01/23 06:31:18 todd Exp $-})dnl
1.1 todd 4: dnl
5: divert(1)dnl
6: {-#-}
7: {-#-} Copyright (c) 2001 Todd T. Fries <todd@OpenBSD.org>
8: {-#-} All rights reserved.
9: {-#-}
10: {-#-} Redistribution and use in source and binary forms, with or without
11: {-#-} modification, are permitted provided that the following conditions
12: {-#-} are met:
13: {-#-} 1. Redistributions of source code must retain the above copyright
14: {-#-} notice, this list of conditions and the following disclaimer.
15: {-#-} 2. The name of the author may not be used to endorse or promote products
16: {-#-} derived from this software without specific prior written permission.
17: {-#-}
18: {-#-} THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
19: {-#-} INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
20: {-#-} AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21: {-#-} THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
22: {-#-} EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23: {-#-} PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
24: {-#-} OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
25: {-#-} WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
26: {-#-} OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
27: {-#-} ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28: {-#-}
29: dnl
30: dnl Diversions: (upon termination, concatenated output queues)
31: dnl
32: dnl 0 - very top
33: dnl 1 - descriptions of devices
34: dnl 2 - init of script, function definitions, etc
35: dnl 3 - beginning of global recursive R() function
36: dnl 7 - body of MAKEDEV, device creations, etc
37: dnl 9 - end
38: dnl
39: dnl HOW TO ADD A DEVICE:
40: dnl
41: dnl In this file, you must use at least two macros:
42: dnl
43: dnl Use '__devitem(uniqueid,name-pattern,description)' to create an entry
44: dnl in the description at the top of the generated MAKEDEV file:
45: dnl
46: dnl __devitem(sca,sca*,Sugar Generic device)dnl
47: dnl
48: dnl This is ultimately shown as:
49: dnl
50: dnl # sca* Sugar Generic device
51: dnl
52: dnl Use '_mkdev(uniqueid,shell-pattern,{-shell-script-})dnl' to create
53: dnl a shell script fragment used to 'create' the device (be sure to match
54: dnl the uniqueid from above):
55: dnl
56: dnl _mkdev(sca,sca*,{-M sca$U c major_sca_c $U
57: dnl M rsca$U b major_sca_b Add($U,128)-})dnl
58: dnl
59: dnl This is ultimately expanded into:
60: dnl
61: dnl sca*) M sca$U c 24 $U
62: dnl M sca$U b 42 $(($U+128));;
63: dnl
64: dnl In the MAKEDEV.md file, add a '_DEV(uniqueid,charmajor,blockmajor)'
65: dnl entry:
66: dnl
67: dnl _DEV(sca,24,42)
68: dnl
69: dnl Final step is to add an entry to the 'all' entry below. For a short
70: dnl example:
71: dnl
1.4 todd 72: dnl _mkdev({-all-},{-all-},{-dnl
1.1 todd 73: dnl _dl({-std-},{-std-},{-sca-},{-sca0 sca1 sca2 sca3-})-})dnl
74: dnl
75: dnl would expand to:
76: dnl
77: dnl all)
78: dnl R std sca0 sca1 sca2 sca3
79: dnl ;;
80: dnl
81: dnl presuming '_DEV(sca..' and '_DEV(std)' were in the MAKEDEV.md file.
82: dnl
83: dnl
84: dnl Everything is 'automatically' added to 'MAKEDEV' based on whether or
85: dnl not the '_DEV()' entry has a corresponding _mkdev() and __devitem()
86: dnl entry in MAKEDEV.sub (this file).
87: dnl
88: dnl Note: be very wary of adding whitespace, carriage returns, or not
89: dnl finishing a macro with ')dnl' .. otherwise, extra blank lines show up
90: dnl in the output.
91: dnl
92: _mkdev(loc,local,{-test -s $T.local && sh $T.local-})dnl
93: dnl
94: __devtitle(make,Device "make" file. Valid arguments)dnl
1.4 todd 95: __devitem({-all-},{-all-},
96: {-makes all known devices{-,-} including local devices.
1.1 todd 97: {-#-} Tries to make the ``standard'' number of each type.-})dnl
98: dnl
99: dnl 'all' is special. The 'D'evice 'L'ist (or _dl) macro checks to see if
100: dnl a particular devices is in the MAKEDEV.md file, and if so, includes the
101: dnl necessary devices. Otherwise the devices are not included in the 'all'
102: dnl target. Note this keeps line lengths to less than column 70. For the
103: dnl gory details see the definition of '_dl' in MAKEDEV.sub
104: dnl
1.18 todd 105: twrget(all,attyB,sd,5,6,7,8,9)dnl
106: target(all,sd,0,1,2,3,4)dnl
107: target(all,mcd,0)dnl
108: twrget(all,fdesc,fd)dnl
109: target(all,pty,0)dnl
110: target(all,st,0)dnl
111: target(all,ch,0)dnl
112: target(all,cd,0)dnl
113: target(all,mcd,0)dnl
114: target(all,std)dnl
115: target(all,vnd,0,1,2,3)dnl
116: target(all,ccd,0,1,2,3)dnl
117: target(all,wd,0,1,2,3)dnl
118: target(all,raid,0,1,2,3)dnl
119: target(all,xy,0,1,2,3)dnl
120: target(all,xd,0,1,2,3)dnl
121: target(all,rz,0,1,2,3,4)dnl
122: target(all,rd,0)dnl
123: target(all,hp,0,1,2,3)dnl
124: target(all,hk,0,1,2,3)dnl
125: target(all,up,0,1,2,3)dnl
126: target(all,ra,0,1,2,3)dnl
127: target(all,rb,0,1,2,3)dnl
128: target(all,rx,0,1)dnl
129: target(all,rl,0,1,2,3)dnl
130: target(all,hd,0,1,2,3,4)dnl
131: twrget(all,flo,fd,0,0B,0C,0D,0E,0F,0G,0H)dnl
132: twrget(all,flo,fd,1,1B,1C,1D,1E,1F,1G,1H)dnl
133: twrget(all,aflo,fd,0,1,2,3)dnl
134: target(all,bpf,0,1,2,3,4,5,6,7,8,9)dnl
135: target(all,tun,0,1,2,3)dnl
136: target(all,pctr)dnl
137: target(all,pctr0)dnl
138: target(all,altq)dnl
139: target(all,pf)dnl
140: twrget(all,cry,crypto)dnl
141: target(all,apm)dnl
1.19 todd 142: twrget(all,tth,ttyh,0,1)dnl
1.18 todd 143: target(all,ttyA,0,1)dnl
144: target(all,ttyB,0,1,2,3,4,5)dnl
145: twrget(all,attyB,ttyB,0,1,2,3,4)dnl
146: target(all,tty0,0,1,2,3)dnl
147: twrget(all,mac_tty0,tty0,0,1)dnl
148: twrget(all,tzs,tty,a,b,c,d)dnl
149: twrget(all,czs,cua,a,b,c,d)dnl
150: target(all,ttyc,0,1,2,3,4,5,6,7)dnl
151: twrget(all,com,tty0,0,1,2,3)dnl
152: twrget(all,mac_ttye,ttye,0)dnl
153: target(all,ttye,0,1,2,3,4,5,6)dnl
154: target(all,lkm)dnl
155: twrget(all,mmcl,mmclock)dnl
156: target(all,lpt,0,1,2)dnl
157: twrget(all,lpt,lpa,0,1,2)dnl
158: target(all,joy,0,1)dnl
159: target(all,rnd,random)dnl
160: target(all,ses,0)dnl
161: target(all,uk,0)dnl
162: target(all,ss,0)dnl
1.20 ! todd 163: target(all,st,0)dnl
1.18 todd 164: target(all,wt,0)dnl
165: target(all,wdt,0)dnl
166: target(all,xfs,0)dnl
167: twrget(all,au,audio,0)dnl
168: twrget(all,speak,speaker)dnl
169: target(all,asc,0)dnl
170: target(all,music,0)dnl
171: target(all,radio,0)dnl
172: target(all,tuner,0)dnl
173: target(all,rmidi,0,1,2,3,4,5,6,7)dnl
174: target(all,usbs)dnl
175: target(all,adb)dnl
176: target(all,iop,0,1)dnl
177: target(all,pci)dnl
178: twrget(all,wsmouse,wscons)dnl
179: twrget(all,btw,bwtwo,0)dnl
180: twrget(all,ctw,cgtwo,0)dnl
181: twrget(all,ctr,cgthree,0)dnl
182: twrget(all,cfr,cgfour,0)dnl
183: twrget(all,csx,cgsix,0)dnl
184: twrget(all,ceg,cgeight,0)dnl
185: twrget(all,cfo,cgfourteen,0)dnl
186: target(all,tcx,0)dnl
187: twrget(all,mac_grf,grf,0,1,2,3)dnl
188: target(all,grf,0,1,2,3,4,5,6)dnl
189: target(all,par,0)dnl
190: twrget(all,amouse,mouse,0,1)dnl
191: twrget(all,akbd,kbd)dnl
192: target(all,ppi,0)dnl
193: target(all,view0,0,1,2,3,4,5)dnl
194: target(all,local)dnl
195: dnl
1.1 todd 196: _mkdev(all,{-all-},{-dnl
1.18 todd 197: show_target(all)dnl
198: -})dnl
199: dnl
1.1 todd 200: __devitem(floppy,floppy,devices to be put on install floppies)dnl
201: __devitem(std,{-std-},standard devices)dnl
202: dnl
1.18 todd 203: dnl
204: dnl
1.1 todd 205: dnl _std
206: dnl
207: dnl $1: tty
208: dnl $2: memstuff
209: dnl $3: ksyms
210: dnl $4: drum
211: dnl $5: klog
212: dnl
213: define({-_std-},{-dnl
214: std)
215: M console c 0 0 600
216: M tty c $1 0
217: M mem c $2 0 640 kmem
218: M kmem c $2 1 640 kmem
219: M null c $2 2
220: M zero c $2 12
221: M stdin c major_fdesc_c 0
222: M stdout c major_fdesc_c 1
223: M stderr c major_fdesc_c 2
224: M ksyms c $3 0 640 kmem
225: M drum c $4 0 640 kmem
226: M klog c $5 0 600-})dnl
227: dnl
1.18 todd 228: target(usb,usb,0,1)dnl
229: target(usb,urio,0)dnl
230: target(usb,uscanner,0)dnl
231: target(usb,uhid,0,1,2,3)dnl
232: target(usb,ulpt,0,1)dnl
233: target(usb,ugen,0,1)dnl
234: target(usb,utty,0,1)dnl
235: dnl
1.1 todd 236: __devitem({-usbs-},usbs,make USB devices)dnl
237: _mkdev(usbs,usbs,{-dnl
1.18 todd 238: show_target({-usb-})dnl
239: -})dnl
1.1 todd 240: __devtitle(tap,Tapes)dnl
241: __devitem(wt,{-wt* -},QIC-interface (e.g. not SCSI) 3M cartridge tape)dnl
242: _mkdev(wt,wt*,
243: {-name=wt
244: n=Mult($U,8) m=Add($n,4)
245: M $name$U b major_wt_b $n 640 operator
246: M r$name$U c major_wt_c $n 640 operator
247: M n$name$U b major_wt_b $m 640 operator
248: M nr$name$U c major_wt_c $m 640 operator-})dnl
249: __devitem(tz,tz*,{-SCSI tapes{-,-} DEC TK50 cartridge tape-})dnl
250: __devitem(st,{-st*-},SCSI tapes)dnl
251: _mkdev(st,st*,{-n=Mult($U,16)
252: for pre in " " n e en
253: do
254: M ${pre}st$U b major_st_b $n 660 operator
255: M ${pre}rst$U c major_st_c $n 660 operator
256: n=Add($n,1)
257: done-})dnl
258: _mkdev(st_hp300,ct*|mt*|st*,
259: {-case $i in
260: ct*) name=ct blk=major_ct_b chr=major_ct_c;;
261: mt*) name=mt blk=major_mt_b chr=major_mt_c;;
262: st*) name=st blk=major_st_hp300_b chr=major_st_hp300_c;;
263: esac
264: case $U in
265: [0-7])
266: four=Add($U,4) eight=Add($U,8)
267: twelve=Add($U,12) twenty=Add($U,20)
268: M r$name$U c $chr $U 660 operator
269: M r$name$four c $chr $four 660 operator
270: M r$name$eight c $chr $eight 660 operator
271: M r$name$twelve c $chr $twelve 660 operator
272: MKlist="$MKlist;ln r$name$four nr$name$U";: sanity w/pdp11 v7
273: MKlist="$MKlist;ln r$name$twelve nr$name$eight";: ditto
274: RMlist="$RMlist nr$name$U nr$name$eight"
275: ;;
276: *)
277: echo bad unit for tape in: $1
278: ;;
279: esac-})dnl
280: __devitem(st_hp300,st*,Exabyte tape)dnl
281: __devitem(ct,ct*,HP300 HP-IB cartridge tape)dnl
282: __devitem(mt,mt*,(Magnetic) 9-track reel tape)dnl
283: __devtitle(dis,Disks)dnl
284: __devitem(rz,rz*,SCSI disks)dnl
285: __devitem(sd,{-sd*-},SCSI disks{-,-} includes flopticals)dnl
286: __devitem(hd,{-hd*-},HP300 HP-IB disks)dnl
287: __devitem(cd,{-cd*-},SCSI cdrom drives)dnl
288: __devitem(acd,acd*,ATAPI cdrom drives)dnl
1.6 todd 289: _mkdev(cd,cd*,{-dodisk2 cd $U major_cd_b major_cd_c $U 0{--}ifstep(cd)-})dnl
290: __devitem(mcd,mcd*,Mitsumi cdrom drives)dnl
291: _mkdev(mcd,mcd*,{-dodisk2 mcd $U major_mcd_b major_mcd_c $U 0{--}ifstep(mcd)dnl
1.1 todd 292: -})dnl
293: __devitem(ch,{-ch*-},SCSI media changer)dnl
294: _mcdev(ch,ch*,ch,{-major_ch_c-},660,operator)dnl
295: __devitem(uk,uk*,SCSI Unknown device)dnl
296: _mcdev(uk,uk*,uk,{-major_uk_c-},640,operator)dnl
297: __devitem(ss,ss*,SCSI scanners)dnl
298: _mkdev(ss,ss*,{-M ss$U c major_ss_c $U 440 operator
299: RMlist="$RMlist scan$U"
300: MKlist="$MKlist;umask 77;ln -s ss$U scan$U"-})dnl
301: __devitem(ses,ses*,SES/SAF-TE SCSI devices)dnl
302: _mkdev(ses,ses*,{-M ses$U c major_ses_c $U 640 operator-})dnl
303: __devitem(ramd,ramdisk,makes all devices for a ramdisk kernel)dnl arc
1.20 ! todd 304: _mkdev(ramd,ramdisk,{-dnl
! 305: show_target(ramd)dnl
! 306: -})dnl
1.18 todd 307: ifelse(MACHINE,mvmeppc,{-dnl
308: target(ramd,std)dnl
309: target(ramd,tty0,0,1,2,3)dnl
310: twrget(ramd,wsdisp,ttyC,0)dnl
311: target(ramd,rd,0)dnl
312: target(ramd,wd,0,1,2,3)dnl
313: target(ramd,sd,0,1,2,3,4)dnl
314: target(ramd,st,0,1)dnl
315: -})dnl
316: ifelse(MACHINE,i386,{-dnl
317: target(ramd,std)dnl
318: target(ramd,tty0,0,1,2,3)dnl
319: twrget(ramd,wsdisp,ttyC,0)dnl
320: target(ramd,wt,0)dnl
321: target(ramd,fd,0)dnl
322: target(ramd,rd,0)dnl
323: target(ramd,wd,0,1,2,3)dnl
324: target(ramd,sd,0,1,2,3)dnl
325: target(ramd,st,0,1)dnl
326: target(ramd,mcd,0)dnl
327: -})dnl
1.20 ! todd 328: target(ramd,random)dnl
! 329: target(ramd,bpf,0)dnl
! 330: target(ramd,cd,0,1)dnl
1.1 todd 331: __devitem(rd,{-rd*-},"ramdisk" pseudo-disks)dnl
1.6 todd 332: _mkdev(rd,rd*,{-dodisk2 rd $U major_rd_b major_rd_c $U 0{--}ifstep(rd)-})dnl
1.1 todd 333: __devitem(xd,xd*,Xylogic 753/7053 disks)dnl
334: __devitem(xy,xy*,{- Xylogic 450/451 disks-})dnl
335: __devitem(flo,{-fd*-},{-Floppy disk drives (3 1/2"{-,-} 5 1/4")-})dnl
336: _mkdev(flo,fd*,
337: {-typnam=$U${i#fd[01]*}
338: case $typnam in
339: 0|1) typnum=0;; # no type specified, assume A
340: *A) typnam=0; typnum=0;;
341: *B) typnum=1;;
342: *C) typnum=2;;
343: *D) typnum=3;;
344: *E) typnum=4;;
345: *F) typnum=5;;
346: *G) typnum=6;;
347: *H) typnum=7;;
348: *) echo bad type $typnam for $i; exit 1;;
349: esac
350: case $U in
351: 0|1) blk=major_flo_b; chr=major_flo_c;;
352: *) echo bad unit $U for $i; exit 1;;
353: esac
354: nam=fd${typnam}
355: n=Add(Mult($U,128),Mult($typnum,16))
356: M ${nam}a b $blk $n 640 operator
357: M ${nam}b b $blk Add($n,1) 640 operator
358: M ${nam}c b $blk Add($n,2) 640 operator
359: M r${nam}a c $chr $n 640 operator
360: M r${nam}b c $chr Add($n,1) 640 operator
361: M r${nam}c c $chr Add($n,2) 640 operator-},664)dnl
362: __devitem(aflo,floppy,devices needed for install floppies)dnl
363: _mkdev(aflo,fd*,{-case $U in 0|1|2|3)
364: M fd${U}a b major_aflo_b Mult($U,16) 640 operator
365: M fd${U}b b major_aflo_b Add(Mult($U,16),1) 640 operator
366: M rfd${U}a c major_aflo_c Mult($U,16) 640 operator
367: M rfd${U}b c major_aflo_c Add(Mult($U,16),1) 640 operator;;
368: *) echo bad unit for floppy disk in: $i;;
369: esac-})dnl
370: __devitem(iop,iop*,I2O controller device)dnl
371: _mcdev(iop,iop*,iop,{-major_iop_c-},660)dnl
372: __devitem(wdt,wdt0,watchdog timer)dnl
373: _mcdev(wdt,wdt0,wdt,{-major_wdt_c-},440,operator)dnl
374: __devitem(local,local,configuration specific devices)dnl
375: __devitem(wd,{-wd*-},{-"winchester" disk drives (ST506,IDE,ESDI,RLL,...)-})dnl
376: __devitem(ccd,ccd*,concatenated disk devices)dnl
377: __devitem(raid,raid*,RAIDframe disk devices)dnl
378: __devitem(vnd,vnd*,"file" pseudo-disks)dnl
1.6 todd 379: _mkdev(vnd,vnd*,{-dodisk vnd $U major_vnd_b major_vnd_c $U 0{--}ifstep(vnd)
380: dodisk svnd $U major_vnd_b major_vnd_c $U 128{--}ifstep(vnd)-})dnl
1.18 todd 381: __devitem(ra,ra*,{-MSCP disks (ra??, hd??)-})dnl
382: __devitem(hp,hp*,{-massbuss rm??-})dnl
383: __devitem(hk,hk*,{-unibus rk06 and rk07-})dnl
384: __devitem(up,up*,{-other unibus devices (e.g. on Emulex sc-21v controller)-})dnl
385: __devitem(rb,rb*,{-730 idc w/ rb80 and/or rb02-})dnl
386: __devitem(rx,rx*,{-MSCP floppy disk (rx33/50/...)-})dnl
387: __devitem(rl,rl*,{-unibus r102-})dnl
388: __devitem(hd,hd*,{-HDC9224 hd disks on VS2000-})dnl
1.1 todd 389: dnl
390: dnl For normal disk devices, add a disk_q entry; anything else define like
391: dnl the rest (such as vnd above).
392: dnl
1.18 todd 393: disk_q({-ccd-})dnl
394: disk_q({-hd-})dnl
395: disk_q({-hk-})dnl
396: disk_q({-hp-})dnl
397: disk_q({-ra-})dnl
398: disk_q({-raid-})dnl
399: disk_q({-rb-})dnl
400: disk_q({-rl-})dnl
401: disk_q({-rx-})dnl
402: disk_q({-sd-})dnl
1.1 todd 403: disk_q({-xy-})dnl
404: disk_q({-xd-})dnl
1.18 todd 405: disk_q({-up-})dnl
406: disk_q({-wd-})dnl
1.1 todd 407: disk_q({-rz-})dnl
408: dnl
409: __devitem(loc,local,configuration specific devices)dnl
410: _mkdev(loc,local,{-test -s $T.local && sh $T.local-})dnl
411: _mkdev({-disks-},{-undefine({-C_ase-})show_disks()undefine({-C_ase-})-},
412: {-case $i in
413: show_disks2()dnl
1.6 todd 414: esac-})dnl
1.1 todd 415: __mkdev({-disks-}){--}dnl
416: dnl
417: __devtitle(cons,Console ports)dnl
418: __devitem(ttyv0,ttyv0,pccons or pcvt screen 0)dnl
419: __devitem(ttyv,ttyv*,pcvt)dnl
420: __devitem(ttye,ttye*,ite bitmapped consoles)dnl
1.13 todd 421: __devitem(mac_ttye,ttye*,ite bitmapped consoles)dnl
1.1 todd 422: __devitem(wscons,ttyC0,wscons screen 0)dnl
423: _mkdev({-wscons-},{-wscons-},{-dnl
424: _dl(dnl
425: {-wscons-},{-ttyCcfg-},
1.3 todd 426: {-wsdisp-},{-ttyC0 ttyC1 ttyC2 ttyC3 ttyC4 ttyC5 ttyC6 ttyC7 ttyC8 ttyC9-},
427: {-wsdisp-},{-ttyCa ttyCb-},
1.1 todd 428: {-wsmux-},{-wsmux-},
429: {-wskbd-},{-wskbd0 wskbd1 wskbd2 wskbd3-},
430: {-wsmouse-},{-wsmouse0 wsmouse1 wsmouse2 wsmouse3-})-})dnl
1.3 todd 431: __devitem(wsdisp,ttyC*,wscons virtual consoles)dnl
432: _mkdev({-wsdisp-},ttyC*,{-U=${i##ttyC}
433: case $U in
1.8 todd 434: [0-9a-f]) M ttyC$U c major_wsdisp_c {-$(( 16#$U ))-} 600;;
435: cfg) M ttyCcfg c major_wsdisp_c 255 600;;
1.3 todd 436: *) echo bad unit $U for $i; exit 1;;
1.6 todd 437: esac-})dnl
1.1 todd 438: __devitem(wskbd,wskbd*,wscons keyboards)dnl
439: _mkdev(wskbd,wskbd*,{-M wskbd$U c major_wskbd_c $U 600-})dnl
440: __devitem(wsmux,wsmux,wscons keyboard/mouse mux devices)dnl
441: _mkdev(wsmux,wsmux|wsmouse|wskbd,{-M wsmouse c major_wsmux_c 0 600
442: M wskbd c major_wsmux_c 1 600-})dnl
443: __devitem(pcons,console,PROM console)dnl
444: __devtitle(point,Pointing devices)dnl
445: __devitem(wsmouse,wsmouse*,wscons mice)dnl
446: _mkdev(wsmouse,wsmouse*,{-M wsmouse$U c major_wsmouse_c $U 600-})dnl
447: __devitem(quad,quadmouse,"quadrature mouse")dnl
448: __devtitle(pty,Pseudo terminals)dnl
449: __devitem(tty,tty*,set of 16 slave psuedo terminals)dnl
450: __devitem(pty,pty*,set of 16 master pseudo terminals)dnl
451: _mkdev(pty,pty*,{-case $U in
452: 0) off=0 name=p;;
453: 1) off=16 name=q;;
454: 2) off=32 name=r;;
455: 3) off=48 name=s;;
456: # Note that telnetd, rlogind, and xterm (at least) only look at p-s.
457: 4) off=64 name=t;;
458: 5) off=80 name=u;;
459: 6) off=96 name=v;;
460: 7) off=112 name=w;;
461: 8) off=128 name=x;;
462: 9) off=144 name=y;;
463: 10) off=160 name=z;;
464: 11) off=176 name=P;;
465: 12) off=192 name=Q;;
466: 13) off=206 name=R;;
467: 14) off=224 name=S;;
468: 15) off=240 name=T;;
469: *) echo bad unit for pty in: $i; continue;;
470: esac
471: n=0
472: while [ $n -lt 16 ]
473: do
474: nam=$name$(hex $n)
475: M tty$nam c major_tty_c Add($off,$n)
476: M pty$nam c major_pty_c Add($off,$n)
477: n=Add($n,1)
478: done-})dnl
479: __devitem(dc,dc*,{-4 channel serial interface (keyboard{-,-} mouse{-,-}modem{-,-} printer)-})dnl
480: __devtitle(prn,Printers)dnl
481: __devitem(par,par*,motherboard parallel port)dnl
482: __devitem(lpt,lpt*,IEEE 1284 centronics printer)dnl
483: _mkdev(lpt,lpt*|lpa*,
484: {-case $i in
485: lpt*) n=lpt f=0;;
486: lpa*) n=lpa f=128;;
487: esac
488: M $n$U c major_lpt_c Add($U,$f) 600-})dnl
489: __devitem(lpa,lpa*,interruptless lp)dnl
490: __devitem(ppi,ppi*,HP-IB plotters)dnl
491: __devtitle({-usb-},USB devices)dnl
492: __devitem({-usb-},usb*,Bus control devices used by usbd for attach/detach)dnl
493: _mkdev({-usb-},usb*,{-[ "$i" = "usb" ] && u= || u=$U
494: M usb$u c major_usb_c $U 660-})dnl
495: __devitem(uhid,uhid*,Generic HID devices)dnl
496: _mcdev({-uhid-},uhid*,{-uhid-},{-major_uhid_c-},660)dnl
497: __devitem(ulpt,ulpt*,Printer devices)dnl
498: _mcdev({-ulpt-},ulpt*,{-ulpt-},{-major_ulpt_c-},660)dnl
499: __devitem(utty,utty*,Serial ports)dnl
500: _mcdev({-utty-},utty*,{-utty-},{-major_utty_c-},660)dnl
501: __devitem(urio,urio*,Diamond Multimedia Rio 500)dnl
502: _mcdev({-urio-},urio*,{-urio-},{-major_urio_c-},660)dnl
1.2 todd 503: __devitem(uscan,uscanner*,Scanners)dnl
504: _mcdev({-uscan-},uscanner*,{-uscanner-},{-major_uscan_c-},660)dnl
1.1 todd 505: __devitem(ugen,ugen*,Generic device)dnl
506: _mkdev(ugen,ugen*,{-n=Mult($U,16)
507: for j in 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
508: do
509: M ugen$U.$j c major_ugen_c Add($n,$j) 660
510: done-})dnl
511: __devtitle(cpu,Cpus)dnl
512: __devitem(cpu,cpu*,cpus)dnl
513: __devtitle(call,Call units)dnl
514: __devtitle(term,Terminal ports)dnl
515: __devtitle(termp,Terminal multiplexers)dnl
516: __devitem(dca,dca*,HP200/300 single port serial interface)dnl
517: __devitem(dcm,dcm*,HP200/300 4 port serial mux interface)dnl
518: __devitem(apci,apci*,HP400 4 port serial mux interface)dnl
519: __devitem({-com-},{-tty0*-},NS16x50 serial ports)dnl
520: _mkdev(com,{-tty0*-},{-M tty$U c major_com_c $U 660 dialer uucp
521: M cua$U c major_com_c Add($U,128) 660 dialer uucp-})dnl
522: __devitem(ttyc,ttyc*,Cyclades serial ports)dnl
523: __devitem(tzs,tty[a-z]*,Zilog 8530 Serial Port)dnl
524: _mkdev(tzs,{-tty[a-z]-},{-u=${i#tty*}
525: case $u in
526: a) n=0 ;;
527: b) n=1 ;;
528: c) n=4 ;;
529: d) n=5 ;;
530: *) echo unknown tty device $i ;;
531: esac
532: M tty$u c major_tzs_c $n 660 dialer uucp-})dnl
533: __devitem(tth,ttyh*,Sab82532 serial devices)dnl
534: _mkdev(tth,ttyh*,{-M ttyh$U c major_tth_c $U 660 dialer uucp-})dnl
535: __devitem(czs,cua[a-z]*,Zilog 8530 Serial Port)dnl
536: _mkdev(czs,cua[a-z],{-u=${i#cua*}
537: case $u in
538: a) n=0 ;;
539: b) n=1 ;;
540: c) n=4 ;;
541: d) n=5 ;;
542: *) echo unknown cua device $i ;;
543: esac
544: M cua$u c major_czs_c Add($n,128) 660 dialer uucp-})dnl
545: __devitem(arm_tty,tty*,{-alias for PC COM ports{-,-} this is what the system really wants-})dnl
546: __devitem(tty0,tty00,standard serial port)dnl
1.13 todd 547: __devitem(mac_tty0,tty00,standard serial port)dnl
1.1 todd 548: __devitem(ttyA,ttyA*,mfc serial ports)dnl
549: __devitem(attyB,ttyB*,ISA COM ports)dnl amiga
550: __devitem(ttyz,tty[a-d],onboard zs serial ports)dnl
551: __devitem(cuaz,cua[a-d],onboard zs serial ports)dnl
552: __devitem(ttyB,ttyB?,DEC 3000 ZS8530 ("scc") serial ports)dnl
553: __devitem(scc,scc*,82530 serial interface)dnl
554: __devitem(arc_ttyC,ttyC0,pccons)dnl
555: __devitem(i386_ttyC,ttyC*,pcvt)dnl
556: __devitem(ttyC,ttyC?,{-AlphaStation NS16550 ("com serial ports")-})dnl
557: __devitem(ttyE,ttyE?,Workstation console (framebuffer & keyboard) tty emulators)dnl
558: __devitem(ser02,ser02,{-serial2 port (channel A on 8530)-})dnl
559: __devitem(mdm02,mdm02,{-modem2 port (channel B on 8530)-})dnl
560: __devtitle(spec,Special purpose devices)dnl
561: __devitem(apm,apm ,power management device)dnl
562: _mkdev(apm,apm*,{-M apm c major_apm_c 0 644
563: M apmctl c major_apm_c 8 644-})dnl
564: __devitem(pcmcia,pcmcia*,PCMCIA card drivers)dnl
565: __devitem(pctr,pctr*,PC Performance Tuning Register access device)dnl
566: _mkdev(pctr,pctr,{-M pctr c major_pctr_c 0 644-})dnl
567: __devitem(au,audio*,audio device)dnl
568: _mkdev(au,audio*,{-M sound$U c major_au_c $U
569: M mixer$U c major_au_c Add($U,16)
570: M audio$U c major_au_c Add($U,128)
571: M audioctl$U c major_au_c Add($U,192)
572: MKlist="$MKlist;[ -e audio ] || ln -s audio$U audio"
573: MKlist="$MKlist;[ -e mixer ] || ln -s mixer$U mixer"
574: MKlist="$MKlist;[ -e sound ] || ln -s sound$U sound"
575: MKlist="$MKlist;[ -e audioctl ] || ln -s audioctl$U audioctl"-})dnl
1.13 todd 576: __devitem(asc,asc*,ASC Audio device)dnl
577: _mkdev(asc,asc*,{-M asc$U major_asc_c 0-})dnl
1.1 todd 578: __devitem(music,music*,midi devices)dnl
579: _mkdev(music,music*,{-M music$U c major_music_c $U
580: M sequencer$U c major_music_c Add($U,128)
581: MKlist="$MKlist;[ -e music ] || ln -s music$U music"
582: MKlist="$MKlist;[ -e sequencer ] || ln -s sequencer$U sequencer"-})dnl
1.8 todd 583: __devitem(radio,radio*,FM tuner device)dnl
584: _mkdev(radio,radio*,{-M radio$U c major_radio_c $U 644
585: MKlist="$MKlist;[ -e radio ] || ln -s radio$U radio"-})dnl
1.1 todd 586: __devitem(fdesc,fd,makes fd/* for the fdescfs)dnl
587: _mkdev(fdesc,fd,{-RMlist="mkdir -p fd;$RMlist" n=0
588: while [ $n -lt 64 ];do M fd/$n c major_fdesc_c $n;n=Add($n,1);done
589: MKlist="$MKlist;chmod 555 fd"-})dnl
590: __devtitle(graph,Graphics devices)dnl
1.13 todd 591: __devitem(mac_grf,grf*,{-custom chip (grf0){-,-} Retina Z2/Z3 (grf1/grf2){-,-}
1.1 todd 592: {-#-} Cirrus boards (grf3){-,-} A2410 (grf4) video or
593: {-#-} CyberVision 64 (grf5)-})dnl
594: __devitem(grf_amiga,grf*,{-Motherboard bitmapped video.-})dnl
595: __devitem(grf_hp300,grf*,raw interface to HP300 graphics devices)dnl
596: __devitem(ite,ite*,terminal emulator interface to HP300 graphics devices)dnl
597: __devitem({-hil-},{-hil-},HP300 HIL input devices)dnl
598: __devitem(oppr,openprom)dnl
599: _cdev(oppr,openprom,70,0)dnl
600: __devitem(btw,bwtwo*)dnl
601: _mcdev(btw,bwtwo*,bwtwo,{-major_btw_c-},666)dnl
602: __devitem(ctw,cgtwo*)dnl
603: _mcdev(ctw,cgtwo*,cgtwo,{-major_ctw_c-},666)dnl
604: __devitem(ctr,cgthree*)dnl
605: _mcdev(ctr,cgthree*,cgthree,{-major_ctr_c-},666)dnl
606: __devitem(cfr,cgfour*)dnl
607: _mcdev(cfr,cgfour*,cgfour,{-major_cfr_c-},666)dnl
608: __devitem(csx,cgsix*)dnl
609: _mcdev(csx,cgsix*,cgsix,{-major_csx_c-},666)dnl
610: __devitem(ceg,cgeight*)dnl
611: _mcdev(ceg,cgeight*,cgeight,{-major_ceg_c-},666)dnl
612: __devitem(cfo,cgfourteen*)dnl
613: _mcdev(cfo,cgfourteen*,cgfourteen,{-major_cfo_c-})dnl
614: __devitem(tcx,tcx*)dnl
615: _mcdev(tcx,tcx*,tcx,{-major_tcx_c-})dnl
616: __devitem(cry,crypto,hardware crypto access driver)dnl
617: _mkdev(cry,crypto,{-M crypto c major_cry_c-} 0)dnl
618: __devitem(pf,pf*,Packet Filter)dnl
619: _mkdev(pf,{-pf*-},{-M pf c major_pf_c 0 600-})dnl
620: __devitem(bpf,bpf*,Berkeley Packet Filter)dnl
621: _mkdev(bpf,{-bpf*-},{-M bpf$U c major_bpf_c $U 600-},600)dnl
622: _mkdev(tun,{-tun*-},{-M tun$U c major_tun_c $U 600-},600)dnl
623: __devitem(altq,altq/,ALTQ control interface)dnl
624: _mkdev(altq,altq,{-RMlist="mkdir -p altq;$RMlist"
625: for d in altq cbq wfq afm fifoq red rio localq hfsc cdnr blue priq; do
626: M altq/$d c major_altq_c $U 644
627: U=Add($U,1)
628: done-})dnl
629: __devitem(speak,speaker,pc speaker)dnl
1.15 todd 630: _mkdev(speak,speaker,{-M speaker c major_speak_c 0 600-})dnl
1.1 todd 631: __devitem(kbd,kbd,keyboard (provides events, for X11))dnl
632: _cdev(kbd,kbd,{-major_kbd_c-},0,600)dnl
633: __devitem(kbd_atari,kbd,Atari keyboard)dnl
634: __devitem(akbd,kbd,Amiga keyboard)dnl
635: __devitem(rkbd,kbd,raw keyboard)dnl
636: __devitem(kbdctl,kbdctl,keyboard control)dnl
637: __devitem(beep,beep,riscpc speaker)dnl
638: __devitem(iic,iic*,IIC bus device)dnl
639: __devitem(rtc,rtc*,RTC device)dnl
640: __devitem(view,view*,generic interface to graphic displays)dnl
641: __devitem(aconf,aconf,{-autoconfig information (not yet)-})dnl
642: __devitem(mouse-,mouse-*,"mouse link")dnl
643: __devitem(mouse,mouse,mouse (provides events, for X11))dnl
644: __devitem(amouse,mouse*,Amiga mice)dnl
645: __devitem(lkm,lkm,loadable kernel modules interface)dnl
646: _cdev(lkm,lkm,{-major_lkm_c-},0,640,kmem)dnl
647: __devitem(mmcl,mmclock,memory mapped clock)dnl
648: __devitem(tun,tun*,network tunnel driver)dnl
649: __devitem(rnd,*random,inkernel random data source)dnl
650: _mkdev(rnd,*random,{-n=0
651: for pre in " " s u p a
652: do
653: M ${pre}random c major_rnd_c $n 644
654: n=Add($n,1)
655: done-},644)dnl
656: __devitem(joy,joy*,joystick driver)dnl
1.8 todd 657: _mcdev(joy,joy*,joy,{-major_joy_c-},666)dnl
1.1 todd 658: __devitem(mag,magma*,magma card (makes 16 tty and 2 bpp))dnl
1.18 todd 659: __devitem(bppmag,bppmag[mno],magma parallel port device)dnl
1.17 jason 660: __devitem(spif,spif*,spif card (makes 8 tty and 1 bpp))dnl
1.18 todd 661: __devitem(bppsp,bpp[jkl],spif parallel port device)dnl
662: _mkdev(mag,magma*,{-case $U in
663: 0) offset=0 nam=m;;
664: 1) offset=16 nam=n;;
665: 2) offset=32 nam=o;;
666: *) echo "bad unit for $i: $U"; exit 127;;
667: esac
668: offset=Mult($U,64)
669: n=0
670: while [ $n -lt 16 ]
671: do
672: name=${nam}`hex $n`
673: M tty$name c major_mag_c Add($offset,$n) 660 dialer uucp
674: n=Add($n,1)
675: done
676: M bpp${nam}0 c major_bppmag_c Add($offset,0) 600
677: M bpp${nam}1 c major_bppmag_c Add($offset,1) 600-})dnl
678: _mkdev(spif,spif*,{-case $U in
679: 0) offset=0 nam=j;;
680: 1) offset=16 nam=k;;
681: 2) offset=32 nam=l;;
682: *) echo "bad unit for $i: $U"; exit 127;;
683: esac
684: offset=Mult($U,64)
685: n=0
686: while [ $n -lt 8 ]
687: do
688: name=${nam}`hex $n`
689: M tty$name c major_spif_c Add($offset,$n) 660 dialer uucp
690: n=Add($n,1)
691: done
692: M bpp${nam}0 c major_bppsp_c Add($offset,0) 600-})dnl
693: __devitem(bpp,bpp*,parallel port devices)dnl
1.1 todd 694: __devitem(xfs,xfs*,XFS filesystem devices)dnl
695: _mcdev(xfs,xfs*,xfs,{-major_xfs_c-},600)dnl
696: __devitem(hil,hil,HIL input devices)dnl
697: __devitem(rmidi,rmidi*,raw midi devices)dnl
698: _mcdev(rmidi,rmidi*,rmidi,{-major_rmidi_c-},666)dnl
699: __devtitle(plat,Platform-specific devices)dnl
700: __devitem(fb,fb*,framebuffer device)dnl
701: __devitem(bktr,bktr*,video capturing)dnl
702: _mcdev(bktr,bktr*,bktr,{-major_bktr_c-},644)dnl
703: __devitem(tuner,tuner*,tuner device)dnl
704: _mkdev(tuner,tuner*,{-M tuner$U c major_tuner_c Add(Mult($U,2),16) 644-},644)dnl
1.7 todd 705: __devitem(pci,pci,PCI bus device)dnl
706: _mkdev(pci,pci,{-M pci c major_pci_c 0 664-},664)dnl
1.13 todd 707: __devitem(adb,adb,Apple Desktop bus event interface)dnl
708: _mkdev(adb,adb,{-M adb c major_adb_c 0-})dnl
1.15 todd 709: __devitem(pdc,pdc,PDC device)dnl
1.1 todd 710: _mkdev(local,local,{-test -s $T.local && sh $T.local-},666)dnl
711: dnl
712: divert(1)dnl
713: include(etc.MACHINE/MAKEDEV.md)dnl
714: dnl
715: dnl
716: divert(0)dnl
717: #!/bin/sh -
718: #
719: # THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT.
720: # generated from:
721: #
722: show_vers()dnl <-- now that all files are included, show versions
723: #
1.6 todd 724: {-#-} $Open{--}BSD$
1.1 todd 725: dnl
726: divert(2)dnl
727: PATH=/sbin:/usr/sbin:/bin:/usr/bin
728: T=$0
729:
730: # set this to echo for Echo-Only debugging
731: [ "$eo" ] || eo=
732:
733: hex()
734: {
735: case ${--}1 in
736: [0-9]) echo -n {-$-}1;;
737: 10) echo -n a;;
738: 11) echo -n b;;
739: 12) echo -n c;;
740: 13) echo -n d;;
741: 14) echo -n e;;
742: 15) echo -n f;;
743: esac
744: }
745: trunc()
746: {
747: # XXX pdksh can't seem to deal with locally scoped variables
748: # in ${foo#$bar} expansions
749: arg1="{-$-}1"
750: arg2="{-$-}2"
751: case {-$-}3 in
752: l) echo ${arg2#$arg1} ;;
753: r|*) echo ${arg1#$arg2} ;;
754: esac
755: }
756: unt()
757: {
758: # XXX pdksh can't seem to deal with locally scoped variables
759: # in ${foo#$bar} expansions
760: arg="{-$-}1"
761: tmp="${arg#[a-zA-Z]*}"
762: tmp="${tmp%*[a-zA-Z]}"
763: while [ "$tmp" != "$arg" ]
764: do
765: arg=$tmp
766: tmp="${arg#[a-zA-Z]*}"
767: tmp="${tmp%*[a-zA-Z]}"
768: done
769: echo $arg
770: }
771: dnl
1.5 todd 772: dnl dodisk(name,unit,blkmaj,chrmaj,unit,off[,stepping])
773: dnl arg: 1 2 3 4 5 6 7
1.1 todd 774: dnl
775: dodisk()
776: {
1.5 todd 777: n=Add(Mult(${5},${7:-16}),${6}) count=0
1.1 todd 778: RMlist="$RMlist {-$-}1{-$-}2? r{-$-}1{-$-}2?"
1.13 todd 779: [ 0$7 -ne 8 ] && l="i j k l m n o p"
780: for d in a b c d e f g h $l
1.1 todd 781: do
782: M {-$-}1{-$-}2$d b {-$-}3 Add($n,$count) 640
783: M r{-$-}1{-$-}2$d c {-$-}4 Add($n,$count) 640
784: let count=count+1
785: done
786: MKlist="$MKlist;chown root.operator {-$-}1{-$-}2? r{-$-}1{-$-}2?"
787: }
788: dnl
1.5 todd 789: dnl dodisk2(name,unit,blkmaj,chrmaj,unit,off[,stepping])
1.1 todd 790: dnl
791: dnl 1. name - prefix name of the device
792: dnl 2. unit - beginning unit number for block devices
793: dnl 3. blkmaj - block device major number
794: dnl 4. chrmaj - character device major number
795: dnl 5. unit - beginning unit number for character devices
796: dnl 6. off - offset from 0 for all minor numbers (see svnd for an example)
1.5 todd 797: dnl 7. step - optional, defaults to 16, number of partitions per device
1.1 todd 798: dnl
799: dodisk2()
800: {
1.5 todd 801: n=Add(Mult({-$-}5,${7:-16}),{-$-}6)
1.1 todd 802: M {-$-}1{-$-}2a b {-$-}3 $n 640 operator
803: M r{-$-}1{-$-}2a c {-$-}4 $n 640 operator
804: n=Add($n,2)
805: M {-$-}1{-$-}2c b {-$-}3 $n 640 operator
806: M r{-$-}1{-$-}2c c {-$-}4 $n 640 operator
807: }
808:
809: # M name b/c major minor [mode] [group]
810: RMlist="rm -f"
811: MKlist=":"
812: mkl() {
813: dnl
814: dnl uncomment if multi mknod happens
815: dnl
816: ifelse(1,0,
817: [ "${mklist[{-$-}1]}" ] && mklist[{-$-}1]="${mklist[{-$-}1]} {-$-}2 {-$-}3 {-$-}4 {-$-}5" || {
818: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
819: modes="$modes {-$-}1"
820: },
821: dnl
822: dnl non multi mknod
823: dnl
824: [ "${mklist[{-$-}1]}" ] && {
825: mklist[{-$-}1]="${mklist[{-$-}1]};mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
826: } || {
827: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
828: modes="$modes {-$-}1"
829: })
830: }
831: M() {
832: RMlist="$RMlist {-$-}1"
833: mkl ${5-666} {-$-}1 {-$-}2 {-$-}3 {-$-}4
834: mklist="$mklist {-$-}1"
835: G={-$-}{6:-wheel}
836: [ "{-$-}7" ] && {
837: MKlist="$MKlist;chown {-$-}7.{-$-}G {-$-}1"
838: } || {
839: case $G in
840: wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;;
841: esac
842: [ "${grplist[$g]}" ] && {
843: grplist[$g]="${grplist[$g]} {-$-}1"
844: } || {
845: groups="$groups $g"
846: grplist[$g]="chgrp $G {-$-}1"
847: }
848: }
849: return 0
850: }
851: divert(7)dnl
852: dnl
853: dnl there is no blank line at the end of etc.arch/MAKEDEV.md files, so add one
854: dnl on the following line:
855:
856: show_devs()dnl
857: dnl
858: divert(9)dnl
859: *)
860: echo $i: unknown device
861: ;;
862: esac
863: done
864: }
865: _recurse "$@"
866: if [ "$os" = "SunOS" ]; then
867: eo=transform
868: transform() {
869: case $mode in
870: 600) mask=077;;
871: 640) mask=027;;
872: 660) mask=007;;
873: 644) mask=022;;
874: 666) mask=0;;
875: 440) mask=227;;
876: esac
877: echo `echo "$@"|sed \
878: 's/mknod -m \([0-9]*\) /umask '$mask';mknod /;s/-m [0-9]* //g;\
879: s/operator/5/g;s/root.kmem/root.2/g;s/root\./root:/g'`
880: }
881: fi
882: list="$RMlist"
883: for mode in $modes; do
884: list="$list;${mklist[$mode]}"
885: done
886: for group in $groups; do
887: list="$list;${grplist[$group]}"
888: done
889: list="$list;$MKlist"
890: if [ "$eo" = "echo" -o "$eo" = "transform" ]; then
891: $eo "$list"
892: else
893: echo "$list" | sh
894: fi
895: divert(3)dnl
896: dnl
897: R() {
898: for i in "$@"
899: do
900: U=`unt $i`
901: [ "$U" ] || U=0
902:
903: case $i in
904: dnl