Annotation of src/etc/MAKEDEV.mi, Revision 1.22
1.1 todd 1: include(MAKEDEV.sub)dnl
2: dnl
1.22 ! todd 3: vers(a,{-$OpenBSD: MAKEDEV.mi,v 1.21 2002/01/23 07:45:44 todd Exp $-})dnl
1.1 todd 4: dnl
5: divert(1)dnl
6: {-#-}
7: {-#-} Copyright (c) 2001 Todd T. Fries <todd@OpenBSD.org>
8: {-#-} All rights reserved.
9: {-#-}
10: {-#-} Redistribution and use in source and binary forms, with or without
11: {-#-} modification, are permitted provided that the following conditions
12: {-#-} are met:
13: {-#-} 1. Redistributions of source code must retain the above copyright
14: {-#-} notice, this list of conditions and the following disclaimer.
15: {-#-} 2. The name of the author may not be used to endorse or promote products
16: {-#-} derived from this software without specific prior written permission.
17: {-#-}
18: {-#-} THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
19: {-#-} INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
20: {-#-} AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21: {-#-} THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
22: {-#-} EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23: {-#-} PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
24: {-#-} OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
25: {-#-} WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
26: {-#-} OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
27: {-#-} ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28: {-#-}
29: dnl
30: dnl Diversions: (upon termination, concatenated output queues)
31: dnl
32: dnl 0 - very top
33: dnl 1 - descriptions of devices
34: dnl 2 - init of script, function definitions, etc
35: dnl 3 - beginning of global recursive R() function
36: dnl 7 - body of MAKEDEV, device creations, etc
37: dnl 9 - end
38: dnl
39: dnl HOW TO ADD A DEVICE:
40: dnl
41: dnl In this file, you must use at least two macros:
42: dnl
43: dnl Use '__devitem(uniqueid,name-pattern,description)' to create an entry
44: dnl in the description at the top of the generated MAKEDEV file:
45: dnl
46: dnl __devitem(sca,sca*,Sugar Generic device)dnl
47: dnl
48: dnl This is ultimately shown as:
49: dnl
50: dnl # sca* Sugar Generic device
51: dnl
52: dnl Use '_mkdev(uniqueid,shell-pattern,{-shell-script-})dnl' to create
53: dnl a shell script fragment used to 'create' the device (be sure to match
54: dnl the uniqueid from above):
55: dnl
56: dnl _mkdev(sca,sca*,{-M sca$U c major_sca_c $U
57: dnl M rsca$U b major_sca_b Add($U,128)-})dnl
58: dnl
59: dnl This is ultimately expanded into:
60: dnl
61: dnl sca*) M sca$U c 24 $U
62: dnl M sca$U b 42 $(($U+128));;
63: dnl
64: dnl In the MAKEDEV.md file, add a '_DEV(uniqueid,charmajor,blockmajor)'
65: dnl entry:
66: dnl
67: dnl _DEV(sca,24,42)
68: dnl
69: dnl Final step is to add an entry to the 'all' entry below. For a short
70: dnl example:
71: dnl
1.4 todd 72: dnl _mkdev({-all-},{-all-},{-dnl
1.1 todd 73: dnl _dl({-std-},{-std-},{-sca-},{-sca0 sca1 sca2 sca3-})-})dnl
74: dnl
75: dnl would expand to:
76: dnl
77: dnl all)
78: dnl R std sca0 sca1 sca2 sca3
79: dnl ;;
80: dnl
81: dnl presuming '_DEV(sca..' and '_DEV(std)' were in the MAKEDEV.md file.
82: dnl
83: dnl
84: dnl Everything is 'automatically' added to 'MAKEDEV' based on whether or
85: dnl not the '_DEV()' entry has a corresponding _mkdev() and __devitem()
86: dnl entry in MAKEDEV.sub (this file).
87: dnl
88: dnl Note: be very wary of adding whitespace, carriage returns, or not
89: dnl finishing a macro with ')dnl' .. otherwise, extra blank lines show up
90: dnl in the output.
91: dnl
92: _mkdev(loc,local,{-test -s $T.local && sh $T.local-})dnl
93: dnl
94: __devtitle(make,Device "make" file. Valid arguments)dnl
1.4 todd 95: __devitem({-all-},{-all-},
96: {-makes all known devices{-,-} including local devices.
1.1 todd 97: {-#-} Tries to make the ``standard'' number of each type.-})dnl
98: dnl
99: dnl 'all' is special. The 'D'evice 'L'ist (or _dl) macro checks to see if
100: dnl a particular devices is in the MAKEDEV.md file, and if so, includes the
101: dnl necessary devices. Otherwise the devices are not included in the 'all'
102: dnl target. Note this keeps line lengths to less than column 70. For the
103: dnl gory details see the definition of '_dl' in MAKEDEV.sub
104: dnl
1.18 todd 105: twrget(all,attyB,sd,5,6,7,8,9)dnl
106: target(all,sd,0,1,2,3,4)dnl
107: target(all,mcd,0)dnl
108: twrget(all,fdesc,fd)dnl
1.22 ! todd 109: target(all,pty,0,1)dnl
! 110: target(all,st,0,1)dnl
1.18 todd 111: target(all,ch,0)dnl
1.22 ! todd 112: target(all,cd,0,1)dnl
1.18 todd 113: target(all,mcd,0)dnl
114: target(all,std)dnl
115: target(all,vnd,0,1,2,3)dnl
116: target(all,ccd,0,1,2,3)dnl
117: target(all,wd,0,1,2,3)dnl
118: target(all,raid,0,1,2,3)dnl
119: target(all,xy,0,1,2,3)dnl
120: target(all,xd,0,1,2,3)dnl
121: target(all,rz,0,1,2,3,4)dnl
122: target(all,rd,0)dnl
123: target(all,hp,0,1,2,3)dnl
124: target(all,hk,0,1,2,3)dnl
125: target(all,up,0,1,2,3)dnl
126: target(all,ra,0,1,2,3)dnl
127: target(all,rb,0,1,2,3)dnl
128: target(all,rx,0,1)dnl
129: target(all,rl,0,1,2,3)dnl
130: target(all,hd,0,1,2,3,4)dnl
131: twrget(all,flo,fd,0,0B,0C,0D,0E,0F,0G,0H)dnl
132: twrget(all,flo,fd,1,1B,1C,1D,1E,1F,1G,1H)dnl
133: twrget(all,aflo,fd,0,1,2,3)dnl
134: target(all,bpf,0,1,2,3,4,5,6,7,8,9)dnl
135: target(all,tun,0,1,2,3)dnl
136: target(all,pctr)dnl
137: target(all,pctr0)dnl
138: target(all,altq)dnl
139: target(all,pf)dnl
140: twrget(all,cry,crypto)dnl
141: target(all,apm)dnl
1.19 todd 142: twrget(all,tth,ttyh,0,1)dnl
1.18 todd 143: target(all,ttyA,0,1)dnl
144: target(all,ttyB,0,1,2,3,4,5)dnl
145: twrget(all,attyB,ttyB,0,1,2,3,4)dnl
146: target(all,tty0,0,1,2,3)dnl
147: twrget(all,mac_tty0,tty0,0,1)dnl
148: twrget(all,tzs,tty,a,b,c,d)dnl
149: twrget(all,czs,cua,a,b,c,d)dnl
150: target(all,ttyc,0,1,2,3,4,5,6,7)dnl
151: twrget(all,com,tty0,0,1,2,3)dnl
152: twrget(all,mac_ttye,ttye,0)dnl
153: target(all,ttye,0,1,2,3,4,5,6)dnl
154: target(all,lkm)dnl
155: twrget(all,mmcl,mmclock)dnl
156: target(all,lpt,0,1,2)dnl
157: twrget(all,lpt,lpa,0,1,2)dnl
158: target(all,joy,0,1)dnl
159: target(all,rnd,random)dnl
160: target(all,ses,0)dnl
161: target(all,uk,0)dnl
1.22 ! todd 162: target(all,ss,0,1)dnl
1.20 todd 163: target(all,st,0)dnl
1.18 todd 164: target(all,wt,0)dnl
165: target(all,wdt,0)dnl
166: target(all,xfs,0)dnl
167: twrget(all,au,audio,0)dnl
168: twrget(all,speak,speaker)dnl
169: target(all,asc,0)dnl
170: target(all,music,0)dnl
171: target(all,radio,0)dnl
172: target(all,tuner,0)dnl
173: target(all,rmidi,0,1,2,3,4,5,6,7)dnl
174: target(all,usbs)dnl
175: target(all,adb)dnl
176: target(all,iop,0,1)dnl
177: target(all,pci)dnl
178: twrget(all,wsmouse,wscons)dnl
179: twrget(all,btw,bwtwo,0)dnl
180: twrget(all,ctw,cgtwo,0)dnl
181: twrget(all,ctr,cgthree,0)dnl
182: twrget(all,cfr,cgfour,0)dnl
183: twrget(all,csx,cgsix,0)dnl
184: twrget(all,ceg,cgeight,0)dnl
185: twrget(all,cfo,cgfourteen,0)dnl
186: target(all,tcx,0)dnl
187: twrget(all,mac_grf,grf,0,1,2,3)dnl
188: target(all,grf,0,1,2,3,4,5,6)dnl
189: target(all,par,0)dnl
190: twrget(all,amouse,mouse,0,1)dnl
191: twrget(all,akbd,kbd)dnl
192: target(all,ppi,0)dnl
193: target(all,view0,0,1,2,3,4,5)dnl
194: target(all,local)dnl
195: dnl
1.1 todd 196: _mkdev(all,{-all-},{-dnl
1.18 todd 197: show_target(all)dnl
198: -})dnl
199: dnl
1.1 todd 200: __devitem(floppy,floppy,devices to be put on install floppies)dnl
201: __devitem(std,{-std-},standard devices)dnl
202: dnl
1.18 todd 203: dnl
204: dnl
1.1 todd 205: dnl _std
206: dnl
207: dnl $1: tty
208: dnl $2: memstuff
209: dnl $3: ksyms
210: dnl $4: drum
211: dnl $5: klog
212: dnl
213: define({-_std-},{-dnl
214: std)
215: M console c 0 0 600
216: M tty c $1 0
217: M mem c $2 0 640 kmem
218: M kmem c $2 1 640 kmem
219: M null c $2 2
220: M zero c $2 12
221: M stdin c major_fdesc_c 0
222: M stdout c major_fdesc_c 1
223: M stderr c major_fdesc_c 2
224: M ksyms c $3 0 640 kmem
225: M drum c $4 0 640 kmem
226: M klog c $5 0 600-})dnl
227: dnl
1.18 todd 228: target(usb,usb,0,1)dnl
229: target(usb,urio,0)dnl
230: target(usb,uscanner,0)dnl
231: target(usb,uhid,0,1,2,3)dnl
232: target(usb,ulpt,0,1)dnl
233: target(usb,ugen,0,1)dnl
234: target(usb,utty,0,1)dnl
235: dnl
1.1 todd 236: __devitem({-usbs-},usbs,make USB devices)dnl
237: _mkdev(usbs,usbs,{-dnl
1.18 todd 238: show_target({-usb-})dnl
239: -})dnl
1.1 todd 240: __devtitle(tap,Tapes)dnl
241: __devitem(wt,{-wt* -},QIC-interface (e.g. not SCSI) 3M cartridge tape)dnl
242: _mkdev(wt,wt*,
243: {-name=wt
244: n=Mult($U,8) m=Add($n,4)
245: M $name$U b major_wt_b $n 640 operator
246: M r$name$U c major_wt_c $n 640 operator
247: M n$name$U b major_wt_b $m 640 operator
248: M nr$name$U c major_wt_c $m 640 operator-})dnl
249: __devitem(tz,tz*,{-SCSI tapes{-,-} DEC TK50 cartridge tape-})dnl
250: __devitem(st,{-st*-},SCSI tapes)dnl
251: _mkdev(st,st*,{-n=Mult($U,16)
252: for pre in " " n e en
253: do
254: M ${pre}st$U b major_st_b $n 660 operator
255: M ${pre}rst$U c major_st_c $n 660 operator
256: n=Add($n,1)
257: done-})dnl
258: _mkdev(st_hp300,ct*|mt*|st*,
259: {-case $i in
260: ct*) name=ct blk=major_ct_b chr=major_ct_c;;
261: mt*) name=mt blk=major_mt_b chr=major_mt_c;;
262: st*) name=st blk=major_st_hp300_b chr=major_st_hp300_c;;
263: esac
264: case $U in
265: [0-7])
266: four=Add($U,4) eight=Add($U,8)
267: twelve=Add($U,12) twenty=Add($U,20)
268: M r$name$U c $chr $U 660 operator
269: M r$name$four c $chr $four 660 operator
270: M r$name$eight c $chr $eight 660 operator
271: M r$name$twelve c $chr $twelve 660 operator
272: MKlist="$MKlist;ln r$name$four nr$name$U";: sanity w/pdp11 v7
273: MKlist="$MKlist;ln r$name$twelve nr$name$eight";: ditto
274: RMlist="$RMlist nr$name$U nr$name$eight"
275: ;;
276: *)
277: echo bad unit for tape in: $1
278: ;;
279: esac-})dnl
280: __devitem(st_hp300,st*,Exabyte tape)dnl
281: __devitem(ct,ct*,HP300 HP-IB cartridge tape)dnl
282: __devitem(mt,mt*,(Magnetic) 9-track reel tape)dnl
283: __devtitle(dis,Disks)dnl
284: __devitem(rz,rz*,SCSI disks)dnl
285: __devitem(sd,{-sd*-},SCSI disks{-,-} includes flopticals)dnl
286: __devitem(hd,{-hd*-},HP300 HP-IB disks)dnl
287: __devitem(cd,{-cd*-},SCSI cdrom drives)dnl
288: __devitem(acd,acd*,ATAPI cdrom drives)dnl
1.6 todd 289: _mkdev(cd,cd*,{-dodisk2 cd $U major_cd_b major_cd_c $U 0{--}ifstep(cd)-})dnl
290: __devitem(mcd,mcd*,Mitsumi cdrom drives)dnl
291: _mkdev(mcd,mcd*,{-dodisk2 mcd $U major_mcd_b major_mcd_c $U 0{--}ifstep(mcd)dnl
1.1 todd 292: -})dnl
293: __devitem(ch,{-ch*-},SCSI media changer)dnl
294: _mcdev(ch,ch*,ch,{-major_ch_c-},660,operator)dnl
295: __devitem(uk,uk*,SCSI Unknown device)dnl
296: _mcdev(uk,uk*,uk,{-major_uk_c-},640,operator)dnl
297: __devitem(ss,ss*,SCSI scanners)dnl
298: _mkdev(ss,ss*,{-M ss$U c major_ss_c $U 440 operator
299: RMlist="$RMlist scan$U"
300: MKlist="$MKlist;umask 77;ln -s ss$U scan$U"-})dnl
301: __devitem(ses,ses*,SES/SAF-TE SCSI devices)dnl
302: _mkdev(ses,ses*,{-M ses$U c major_ses_c $U 640 operator-})dnl
303: __devitem(ramd,ramdisk,makes all devices for a ramdisk kernel)dnl arc
1.20 todd 304: _mkdev(ramd,ramdisk,{-dnl
305: show_target(ramd)dnl
306: -})dnl
1.18 todd 307: ifelse(MACHINE,mvmeppc,{-dnl
308: target(ramd,tty0,0,1,2,3)dnl
309: twrget(ramd,wsdisp,ttyC,0)dnl
310: target(ramd,rd,0)dnl
311: target(ramd,wd,0,1,2,3)dnl
312: target(ramd,sd,0,1,2,3,4)dnl
1.21 todd 313: target(ramd,cd,0,1)dnl
314: target(ramd,st,0,1)dnl
315: target(ramd,bpf,0)dnl
316: target(ramd,rd,0)dnl
317: -})dnl
318: ifelse(MACHINE,sparc,{-dnl
319: target(ramd,fd,0)dnl
320: target(ramd,sd,0,1,2,3)dnl
321: target(ramd,rd,0)dnl
322: target(ramd,cd,0)dnl
323: -})dnl
324: ifelse(MACHINE,sparc64,{-dnl
325: target(ramd,fd,0)dnl
326: target(ramd,rd,0)dnl
327: target(ramd,sd,0,1,2,3)dnl
328: target(ramd,wd,0,1,2,3)dnl
329: target(ramd,cd,0,1)dnl
1.18 todd 330: target(ramd,st,0,1)dnl
1.21 todd 331: target(ramd,bpf,0)dnl
1.18 todd 332: -})dnl
333: ifelse(MACHINE,i386,{-dnl
334: target(ramd,tty0,0,1,2,3)dnl
335: twrget(ramd,wsdisp,ttyC,0)dnl
336: target(ramd,wt,0)dnl
337: target(ramd,fd,0)dnl
338: target(ramd,rd,0)dnl
339: target(ramd,wd,0,1,2,3)dnl
340: target(ramd,sd,0,1,2,3)dnl
1.21 todd 341: target(ramd,cd,0,1)dnl
1.18 todd 342: target(ramd,st,0,1)dnl
343: target(ramd,mcd,0)dnl
344: -})dnl
1.21 todd 345: ifelse(MACHINE,alpha,{-dnl
346: target(ramd,sd,0,1,2)dnl
347: target(ramd,wd,0)dnl
348: target(ramd,tty0,0,1)dnl
349: target(ramd,st,0)dnl
350: target(ramd,cd,0)dnl
351: target(ramd,ttyB,0,1)dnl
352: target(ramd,ttyE,0,1)dnl
353: -})dnl
354: ifelse(MACHINE,amiga,{-dnl
355: target(ramd,kbd)dnl
356: target(ramd,pty,0)dnl
357: target(ramd,tty0,0)dnl
358: target(ramd,ttyA,0,1)dnl
359: target(ramd,ttyB,0,1)dnl
360: target(ramd,ttye,0,1,2,3,4,5,6)dnl
361: target(ramd,cd,0,1)dnl
362: target(ramd,sd,0,1,2,3)dnl
363: target(ramd,st,0,1)dnl
364: target(ramd,fd,0,1)dnl
365: target(ramd,wd,0,1)dnl
366: target(ramd,rd,0)dnl
367: -})dnl
368: ifelse(MACHINE,hp300,{-dnl
369: target(ramd,ct,0,1)dnl
370: target(ramd,hd,0,1,2,3,4)dnl
371: target(ramd,sd,0,1,2,3,4)dnl
372: target(ramd,rd,0,1)dnl
373: target(ramd,pty,0)dnl
374: target(ramd,hil)dnl
375: target(ramd,grf,0)dnl
376: target(ramd,apci,0)dnl
377: target(ramd,ite,0)dnl
378: target(ramd,dca,0)dnl
379: target(ramd,dcm,0,1)dnl
380: target(ramd,bpf,0,1)dnl
381: target(ramd,tun,0,1)dnl
382: -})dnl
383: ifelse(MACHINE,hppa,{-dnl
384: target(ramd,st,0,1)dnl
385: target(ramd,sd,0,1,2,3)dnl
386: target(ramd,rd,0,1)dnl
387: target(ramd,pty,0)dnl
388: target(ramd,hil)dnl
389: target(ramd,com,0,1)dnl
390: target(ramd,bpf,0,1)dnl
391: target(ramd,tun,0,1)dnl
392: -})dnl
393: ifelse(MACHINE,mac68k,{-dnl
394: target(ramd,sd,0,1,2,3)dnl
395: target(ramd,st,0,1)dnl
396: target(ramd,adb)dnl
397: target(ramd,asc,0)dnl
398: target(ramd,grf,0,1)dnl
399: target(ramd,ttye,0)dnl
400: twrget(ramd,mac_tty0,tty0,0,1)dnl
401: target(ramd,pty,0)dnl
402: -})dnl
403: ifelse(MACHINE,macppc,{-
404: target(ramd,sd,0,1,2,3,4)dnl
405: target(ramd,st,0,1)dnl
406: target(ramd,cd,0,1)dnl)dnl
407: target(ramd,rd,0)dnl
408: target(ramd,ttyE,0)dnl
409: target(ramd,tty0,0,1)dnl
410: target(ramd,pty,0)dnl
411: -})dnl
412: ifelse(MACHINE,vax,{-
413: target(ramd,fd,0)dnl
414: target(ramd,sd,0,1,2,3)dnl
415: target(ramd,rd,0)dnl
416: target(ramd,cd,0)dnl
417: target(ramd,bpf,0)dnl
418: -})dnl
419: target(ramd,std)dnl
1.20 todd 420: target(ramd,random)dnl
421: target(ramd,bpf,0)dnl
1.1 todd 422: __devitem(rd,{-rd*-},"ramdisk" pseudo-disks)dnl
1.6 todd 423: _mkdev(rd,rd*,{-dodisk2 rd $U major_rd_b major_rd_c $U 0{--}ifstep(rd)-})dnl
1.1 todd 424: __devitem(xd,xd*,Xylogic 753/7053 disks)dnl
425: __devitem(xy,xy*,{- Xylogic 450/451 disks-})dnl
426: __devitem(flo,{-fd*-},{-Floppy disk drives (3 1/2"{-,-} 5 1/4")-})dnl
427: _mkdev(flo,fd*,
428: {-typnam=$U${i#fd[01]*}
429: case $typnam in
430: 0|1) typnum=0;; # no type specified, assume A
431: *A) typnam=0; typnum=0;;
432: *B) typnum=1;;
433: *C) typnum=2;;
434: *D) typnum=3;;
435: *E) typnum=4;;
436: *F) typnum=5;;
437: *G) typnum=6;;
438: *H) typnum=7;;
439: *) echo bad type $typnam for $i; exit 1;;
440: esac
441: case $U in
442: 0|1) blk=major_flo_b; chr=major_flo_c;;
443: *) echo bad unit $U for $i; exit 1;;
444: esac
445: nam=fd${typnam}
446: n=Add(Mult($U,128),Mult($typnum,16))
447: M ${nam}a b $blk $n 640 operator
448: M ${nam}b b $blk Add($n,1) 640 operator
449: M ${nam}c b $blk Add($n,2) 640 operator
450: M r${nam}a c $chr $n 640 operator
451: M r${nam}b c $chr Add($n,1) 640 operator
452: M r${nam}c c $chr Add($n,2) 640 operator-},664)dnl
453: __devitem(aflo,floppy,devices needed for install floppies)dnl
454: _mkdev(aflo,fd*,{-case $U in 0|1|2|3)
455: M fd${U}a b major_aflo_b Mult($U,16) 640 operator
456: M fd${U}b b major_aflo_b Add(Mult($U,16),1) 640 operator
457: M rfd${U}a c major_aflo_c Mult($U,16) 640 operator
458: M rfd${U}b c major_aflo_c Add(Mult($U,16),1) 640 operator;;
459: *) echo bad unit for floppy disk in: $i;;
460: esac-})dnl
461: __devitem(iop,iop*,I2O controller device)dnl
462: _mcdev(iop,iop*,iop,{-major_iop_c-},660)dnl
463: __devitem(wdt,wdt0,watchdog timer)dnl
464: _mcdev(wdt,wdt0,wdt,{-major_wdt_c-},440,operator)dnl
465: __devitem(local,local,configuration specific devices)dnl
466: __devitem(wd,{-wd*-},{-"winchester" disk drives (ST506,IDE,ESDI,RLL,...)-})dnl
467: __devitem(ccd,ccd*,concatenated disk devices)dnl
468: __devitem(raid,raid*,RAIDframe disk devices)dnl
469: __devitem(vnd,vnd*,"file" pseudo-disks)dnl
1.6 todd 470: _mkdev(vnd,vnd*,{-dodisk vnd $U major_vnd_b major_vnd_c $U 0{--}ifstep(vnd)
471: dodisk svnd $U major_vnd_b major_vnd_c $U 128{--}ifstep(vnd)-})dnl
1.18 todd 472: __devitem(ra,ra*,{-MSCP disks (ra??, hd??)-})dnl
473: __devitem(hp,hp*,{-massbuss rm??-})dnl
474: __devitem(hk,hk*,{-unibus rk06 and rk07-})dnl
475: __devitem(up,up*,{-other unibus devices (e.g. on Emulex sc-21v controller)-})dnl
476: __devitem(rb,rb*,{-730 idc w/ rb80 and/or rb02-})dnl
477: __devitem(rx,rx*,{-MSCP floppy disk (rx33/50/...)-})dnl
478: __devitem(rl,rl*,{-unibus r102-})dnl
479: __devitem(hd,hd*,{-HDC9224 hd disks on VS2000-})dnl
1.1 todd 480: dnl
481: dnl For normal disk devices, add a disk_q entry; anything else define like
482: dnl the rest (such as vnd above).
483: dnl
1.18 todd 484: disk_q({-ccd-})dnl
485: disk_q({-hd-})dnl
486: disk_q({-hk-})dnl
487: disk_q({-hp-})dnl
488: disk_q({-ra-})dnl
489: disk_q({-raid-})dnl
490: disk_q({-rb-})dnl
491: disk_q({-rl-})dnl
492: disk_q({-rx-})dnl
493: disk_q({-sd-})dnl
1.1 todd 494: disk_q({-xy-})dnl
495: disk_q({-xd-})dnl
1.18 todd 496: disk_q({-up-})dnl
497: disk_q({-wd-})dnl
1.1 todd 498: disk_q({-rz-})dnl
499: dnl
500: __devitem(loc,local,configuration specific devices)dnl
501: _mkdev(loc,local,{-test -s $T.local && sh $T.local-})dnl
502: _mkdev({-disks-},{-undefine({-C_ase-})show_disks()undefine({-C_ase-})-},
503: {-case $i in
504: show_disks2()dnl
1.6 todd 505: esac-})dnl
1.1 todd 506: __mkdev({-disks-}){--}dnl
507: dnl
508: __devtitle(cons,Console ports)dnl
509: __devitem(ttyv0,ttyv0,pccons or pcvt screen 0)dnl
510: __devitem(ttyv,ttyv*,pcvt)dnl
511: __devitem(ttye,ttye*,ite bitmapped consoles)dnl
1.13 todd 512: __devitem(mac_ttye,ttye*,ite bitmapped consoles)dnl
1.1 todd 513: __devitem(wscons,ttyC0,wscons screen 0)dnl
514: _mkdev({-wscons-},{-wscons-},{-dnl
515: _dl(dnl
516: {-wscons-},{-ttyCcfg-},
1.3 todd 517: {-wsdisp-},{-ttyC0 ttyC1 ttyC2 ttyC3 ttyC4 ttyC5 ttyC6 ttyC7 ttyC8 ttyC9-},
518: {-wsdisp-},{-ttyCa ttyCb-},
1.1 todd 519: {-wsmux-},{-wsmux-},
520: {-wskbd-},{-wskbd0 wskbd1 wskbd2 wskbd3-},
521: {-wsmouse-},{-wsmouse0 wsmouse1 wsmouse2 wsmouse3-})-})dnl
1.3 todd 522: __devitem(wsdisp,ttyC*,wscons virtual consoles)dnl
523: _mkdev({-wsdisp-},ttyC*,{-U=${i##ttyC}
524: case $U in
1.8 todd 525: [0-9a-f]) M ttyC$U c major_wsdisp_c {-$(( 16#$U ))-} 600;;
526: cfg) M ttyCcfg c major_wsdisp_c 255 600;;
1.3 todd 527: *) echo bad unit $U for $i; exit 1;;
1.6 todd 528: esac-})dnl
1.1 todd 529: __devitem(wskbd,wskbd*,wscons keyboards)dnl
530: _mkdev(wskbd,wskbd*,{-M wskbd$U c major_wskbd_c $U 600-})dnl
531: __devitem(wsmux,wsmux,wscons keyboard/mouse mux devices)dnl
532: _mkdev(wsmux,wsmux|wsmouse|wskbd,{-M wsmouse c major_wsmux_c 0 600
533: M wskbd c major_wsmux_c 1 600-})dnl
534: __devitem(pcons,console,PROM console)dnl
535: __devtitle(point,Pointing devices)dnl
536: __devitem(wsmouse,wsmouse*,wscons mice)dnl
537: _mkdev(wsmouse,wsmouse*,{-M wsmouse$U c major_wsmouse_c $U 600-})dnl
538: __devitem(quad,quadmouse,"quadrature mouse")dnl
539: __devtitle(pty,Pseudo terminals)dnl
540: __devitem(tty,tty*,set of 16 slave psuedo terminals)dnl
541: __devitem(pty,pty*,set of 16 master pseudo terminals)dnl
542: _mkdev(pty,pty*,{-case $U in
543: 0) off=0 name=p;;
544: 1) off=16 name=q;;
545: 2) off=32 name=r;;
546: 3) off=48 name=s;;
547: # Note that telnetd, rlogind, and xterm (at least) only look at p-s.
548: 4) off=64 name=t;;
549: 5) off=80 name=u;;
550: 6) off=96 name=v;;
551: 7) off=112 name=w;;
552: 8) off=128 name=x;;
553: 9) off=144 name=y;;
554: 10) off=160 name=z;;
555: 11) off=176 name=P;;
556: 12) off=192 name=Q;;
557: 13) off=206 name=R;;
558: 14) off=224 name=S;;
559: 15) off=240 name=T;;
560: *) echo bad unit for pty in: $i; continue;;
561: esac
562: n=0
563: while [ $n -lt 16 ]
564: do
565: nam=$name$(hex $n)
566: M tty$nam c major_tty_c Add($off,$n)
567: M pty$nam c major_pty_c Add($off,$n)
568: n=Add($n,1)
569: done-})dnl
570: __devitem(dc,dc*,{-4 channel serial interface (keyboard{-,-} mouse{-,-}modem{-,-} printer)-})dnl
571: __devtitle(prn,Printers)dnl
572: __devitem(par,par*,motherboard parallel port)dnl
573: __devitem(lpt,lpt*,IEEE 1284 centronics printer)dnl
574: _mkdev(lpt,lpt*|lpa*,
575: {-case $i in
576: lpt*) n=lpt f=0;;
577: lpa*) n=lpa f=128;;
578: esac
579: M $n$U c major_lpt_c Add($U,$f) 600-})dnl
580: __devitem(lpa,lpa*,interruptless lp)dnl
581: __devitem(ppi,ppi*,HP-IB plotters)dnl
582: __devtitle({-usb-},USB devices)dnl
583: __devitem({-usb-},usb*,Bus control devices used by usbd for attach/detach)dnl
584: _mkdev({-usb-},usb*,{-[ "$i" = "usb" ] && u= || u=$U
585: M usb$u c major_usb_c $U 660-})dnl
586: __devitem(uhid,uhid*,Generic HID devices)dnl
587: _mcdev({-uhid-},uhid*,{-uhid-},{-major_uhid_c-},660)dnl
588: __devitem(ulpt,ulpt*,Printer devices)dnl
589: _mcdev({-ulpt-},ulpt*,{-ulpt-},{-major_ulpt_c-},660)dnl
590: __devitem(utty,utty*,Serial ports)dnl
591: _mcdev({-utty-},utty*,{-utty-},{-major_utty_c-},660)dnl
592: __devitem(urio,urio*,Diamond Multimedia Rio 500)dnl
593: _mcdev({-urio-},urio*,{-urio-},{-major_urio_c-},660)dnl
1.2 todd 594: __devitem(uscan,uscanner*,Scanners)dnl
595: _mcdev({-uscan-},uscanner*,{-uscanner-},{-major_uscan_c-},660)dnl
1.1 todd 596: __devitem(ugen,ugen*,Generic device)dnl
597: _mkdev(ugen,ugen*,{-n=Mult($U,16)
598: for j in 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
599: do
600: M ugen$U.$j c major_ugen_c Add($n,$j) 660
601: done-})dnl
602: __devtitle(cpu,Cpus)dnl
603: __devitem(cpu,cpu*,cpus)dnl
604: __devtitle(call,Call units)dnl
605: __devtitle(term,Terminal ports)dnl
606: __devtitle(termp,Terminal multiplexers)dnl
607: __devitem(dca,dca*,HP200/300 single port serial interface)dnl
608: __devitem(dcm,dcm*,HP200/300 4 port serial mux interface)dnl
609: __devitem(apci,apci*,HP400 4 port serial mux interface)dnl
610: __devitem({-com-},{-tty0*-},NS16x50 serial ports)dnl
611: _mkdev(com,{-tty0*-},{-M tty$U c major_com_c $U 660 dialer uucp
612: M cua$U c major_com_c Add($U,128) 660 dialer uucp-})dnl
613: __devitem(ttyc,ttyc*,Cyclades serial ports)dnl
614: __devitem(tzs,tty[a-z]*,Zilog 8530 Serial Port)dnl
615: _mkdev(tzs,{-tty[a-z]-},{-u=${i#tty*}
616: case $u in
617: a) n=0 ;;
618: b) n=1 ;;
619: c) n=4 ;;
620: d) n=5 ;;
621: *) echo unknown tty device $i ;;
622: esac
623: M tty$u c major_tzs_c $n 660 dialer uucp-})dnl
624: __devitem(tth,ttyh*,Sab82532 serial devices)dnl
625: _mkdev(tth,ttyh*,{-M ttyh$U c major_tth_c $U 660 dialer uucp-})dnl
626: __devitem(czs,cua[a-z]*,Zilog 8530 Serial Port)dnl
627: _mkdev(czs,cua[a-z],{-u=${i#cua*}
628: case $u in
629: a) n=0 ;;
630: b) n=1 ;;
631: c) n=4 ;;
632: d) n=5 ;;
633: *) echo unknown cua device $i ;;
634: esac
635: M cua$u c major_czs_c Add($n,128) 660 dialer uucp-})dnl
636: __devitem(arm_tty,tty*,{-alias for PC COM ports{-,-} this is what the system really wants-})dnl
637: __devitem(tty0,tty00,standard serial port)dnl
1.13 todd 638: __devitem(mac_tty0,tty00,standard serial port)dnl
1.1 todd 639: __devitem(ttyA,ttyA*,mfc serial ports)dnl
640: __devitem(attyB,ttyB*,ISA COM ports)dnl amiga
641: __devitem(ttyz,tty[a-d],onboard zs serial ports)dnl
642: __devitem(cuaz,cua[a-d],onboard zs serial ports)dnl
643: __devitem(ttyB,ttyB?,DEC 3000 ZS8530 ("scc") serial ports)dnl
644: __devitem(scc,scc*,82530 serial interface)dnl
645: __devitem(arc_ttyC,ttyC0,pccons)dnl
646: __devitem(i386_ttyC,ttyC*,pcvt)dnl
647: __devitem(ttyC,ttyC?,{-AlphaStation NS16550 ("com serial ports")-})dnl
648: __devitem(ttyE,ttyE?,Workstation console (framebuffer & keyboard) tty emulators)dnl
649: __devitem(ser02,ser02,{-serial2 port (channel A on 8530)-})dnl
650: __devitem(mdm02,mdm02,{-modem2 port (channel B on 8530)-})dnl
651: __devtitle(spec,Special purpose devices)dnl
652: __devitem(apm,apm ,power management device)dnl
653: _mkdev(apm,apm*,{-M apm c major_apm_c 0 644
654: M apmctl c major_apm_c 8 644-})dnl
655: __devitem(pcmcia,pcmcia*,PCMCIA card drivers)dnl
656: __devitem(pctr,pctr*,PC Performance Tuning Register access device)dnl
657: _mkdev(pctr,pctr,{-M pctr c major_pctr_c 0 644-})dnl
658: __devitem(au,audio*,audio device)dnl
659: _mkdev(au,audio*,{-M sound$U c major_au_c $U
660: M mixer$U c major_au_c Add($U,16)
661: M audio$U c major_au_c Add($U,128)
662: M audioctl$U c major_au_c Add($U,192)
663: MKlist="$MKlist;[ -e audio ] || ln -s audio$U audio"
664: MKlist="$MKlist;[ -e mixer ] || ln -s mixer$U mixer"
665: MKlist="$MKlist;[ -e sound ] || ln -s sound$U sound"
666: MKlist="$MKlist;[ -e audioctl ] || ln -s audioctl$U audioctl"-})dnl
1.13 todd 667: __devitem(asc,asc*,ASC Audio device)dnl
668: _mkdev(asc,asc*,{-M asc$U major_asc_c 0-})dnl
1.1 todd 669: __devitem(music,music*,midi devices)dnl
670: _mkdev(music,music*,{-M music$U c major_music_c $U
671: M sequencer$U c major_music_c Add($U,128)
672: MKlist="$MKlist;[ -e music ] || ln -s music$U music"
673: MKlist="$MKlist;[ -e sequencer ] || ln -s sequencer$U sequencer"-})dnl
1.8 todd 674: __devitem(radio,radio*,FM tuner device)dnl
675: _mkdev(radio,radio*,{-M radio$U c major_radio_c $U 644
676: MKlist="$MKlist;[ -e radio ] || ln -s radio$U radio"-})dnl
1.1 todd 677: __devitem(fdesc,fd,makes fd/* for the fdescfs)dnl
678: _mkdev(fdesc,fd,{-RMlist="mkdir -p fd;$RMlist" n=0
679: while [ $n -lt 64 ];do M fd/$n c major_fdesc_c $n;n=Add($n,1);done
680: MKlist="$MKlist;chmod 555 fd"-})dnl
681: __devtitle(graph,Graphics devices)dnl
1.13 todd 682: __devitem(mac_grf,grf*,{-custom chip (grf0){-,-} Retina Z2/Z3 (grf1/grf2){-,-}
1.1 todd 683: {-#-} Cirrus boards (grf3){-,-} A2410 (grf4) video or
684: {-#-} CyberVision 64 (grf5)-})dnl
685: __devitem(grf_amiga,grf*,{-Motherboard bitmapped video.-})dnl
686: __devitem(grf_hp300,grf*,raw interface to HP300 graphics devices)dnl
687: __devitem(ite,ite*,terminal emulator interface to HP300 graphics devices)dnl
688: __devitem({-hil-},{-hil-},HP300 HIL input devices)dnl
689: __devitem(oppr,openprom)dnl
690: _cdev(oppr,openprom,70,0)dnl
691: __devitem(btw,bwtwo*)dnl
692: _mcdev(btw,bwtwo*,bwtwo,{-major_btw_c-},666)dnl
693: __devitem(ctw,cgtwo*)dnl
694: _mcdev(ctw,cgtwo*,cgtwo,{-major_ctw_c-},666)dnl
695: __devitem(ctr,cgthree*)dnl
696: _mcdev(ctr,cgthree*,cgthree,{-major_ctr_c-},666)dnl
697: __devitem(cfr,cgfour*)dnl
698: _mcdev(cfr,cgfour*,cgfour,{-major_cfr_c-},666)dnl
699: __devitem(csx,cgsix*)dnl
700: _mcdev(csx,cgsix*,cgsix,{-major_csx_c-},666)dnl
701: __devitem(ceg,cgeight*)dnl
702: _mcdev(ceg,cgeight*,cgeight,{-major_ceg_c-},666)dnl
703: __devitem(cfo,cgfourteen*)dnl
704: _mcdev(cfo,cgfourteen*,cgfourteen,{-major_cfo_c-})dnl
705: __devitem(tcx,tcx*)dnl
706: _mcdev(tcx,tcx*,tcx,{-major_tcx_c-})dnl
707: __devitem(cry,crypto,hardware crypto access driver)dnl
708: _mkdev(cry,crypto,{-M crypto c major_cry_c-} 0)dnl
709: __devitem(pf,pf*,Packet Filter)dnl
710: _mkdev(pf,{-pf*-},{-M pf c major_pf_c 0 600-})dnl
711: __devitem(bpf,bpf*,Berkeley Packet Filter)dnl
712: _mkdev(bpf,{-bpf*-},{-M bpf$U c major_bpf_c $U 600-},600)dnl
713: _mkdev(tun,{-tun*-},{-M tun$U c major_tun_c $U 600-},600)dnl
714: __devitem(altq,altq/,ALTQ control interface)dnl
715: _mkdev(altq,altq,{-RMlist="mkdir -p altq;$RMlist"
716: for d in altq cbq wfq afm fifoq red rio localq hfsc cdnr blue priq; do
717: M altq/$d c major_altq_c $U 644
718: U=Add($U,1)
719: done-})dnl
720: __devitem(speak,speaker,pc speaker)dnl
1.15 todd 721: _mkdev(speak,speaker,{-M speaker c major_speak_c 0 600-})dnl
1.1 todd 722: __devitem(kbd,kbd,keyboard (provides events, for X11))dnl
723: _cdev(kbd,kbd,{-major_kbd_c-},0,600)dnl
724: __devitem(kbd_atari,kbd,Atari keyboard)dnl
725: __devitem(akbd,kbd,Amiga keyboard)dnl
726: __devitem(rkbd,kbd,raw keyboard)dnl
727: __devitem(kbdctl,kbdctl,keyboard control)dnl
728: __devitem(beep,beep,riscpc speaker)dnl
729: __devitem(iic,iic*,IIC bus device)dnl
730: __devitem(rtc,rtc*,RTC device)dnl
731: __devitem(view,view*,generic interface to graphic displays)dnl
732: __devitem(aconf,aconf,{-autoconfig information (not yet)-})dnl
733: __devitem(mouse-,mouse-*,"mouse link")dnl
734: __devitem(mouse,mouse,mouse (provides events, for X11))dnl
735: __devitem(amouse,mouse*,Amiga mice)dnl
736: __devitem(lkm,lkm,loadable kernel modules interface)dnl
737: _cdev(lkm,lkm,{-major_lkm_c-},0,640,kmem)dnl
738: __devitem(mmcl,mmclock,memory mapped clock)dnl
739: __devitem(tun,tun*,network tunnel driver)dnl
740: __devitem(rnd,*random,inkernel random data source)dnl
741: _mkdev(rnd,*random,{-n=0
742: for pre in " " s u p a
743: do
744: M ${pre}random c major_rnd_c $n 644
745: n=Add($n,1)
746: done-},644)dnl
747: __devitem(joy,joy*,joystick driver)dnl
1.8 todd 748: _mcdev(joy,joy*,joy,{-major_joy_c-},666)dnl
1.1 todd 749: __devitem(mag,magma*,magma card (makes 16 tty and 2 bpp))dnl
1.18 todd 750: __devitem(bppmag,bppmag[mno],magma parallel port device)dnl
1.17 jason 751: __devitem(spif,spif*,spif card (makes 8 tty and 1 bpp))dnl
1.18 todd 752: __devitem(bppsp,bpp[jkl],spif parallel port device)dnl
753: _mkdev(mag,magma*,{-case $U in
754: 0) offset=0 nam=m;;
755: 1) offset=16 nam=n;;
756: 2) offset=32 nam=o;;
757: *) echo "bad unit for $i: $U"; exit 127;;
758: esac
759: offset=Mult($U,64)
760: n=0
761: while [ $n -lt 16 ]
762: do
763: name=${nam}`hex $n`
764: M tty$name c major_mag_c Add($offset,$n) 660 dialer uucp
765: n=Add($n,1)
766: done
767: M bpp${nam}0 c major_bppmag_c Add($offset,0) 600
768: M bpp${nam}1 c major_bppmag_c Add($offset,1) 600-})dnl
769: _mkdev(spif,spif*,{-case $U in
770: 0) offset=0 nam=j;;
771: 1) offset=16 nam=k;;
772: 2) offset=32 nam=l;;
773: *) echo "bad unit for $i: $U"; exit 127;;
774: esac
775: offset=Mult($U,64)
776: n=0
777: while [ $n -lt 8 ]
778: do
779: name=${nam}`hex $n`
780: M tty$name c major_spif_c Add($offset,$n) 660 dialer uucp
781: n=Add($n,1)
782: done
783: M bpp${nam}0 c major_bppsp_c Add($offset,0) 600-})dnl
784: __devitem(bpp,bpp*,parallel port devices)dnl
1.1 todd 785: __devitem(xfs,xfs*,XFS filesystem devices)dnl
786: _mcdev(xfs,xfs*,xfs,{-major_xfs_c-},600)dnl
787: __devitem(hil,hil,HIL input devices)dnl
788: __devitem(rmidi,rmidi*,raw midi devices)dnl
789: _mcdev(rmidi,rmidi*,rmidi,{-major_rmidi_c-},666)dnl
790: __devtitle(plat,Platform-specific devices)dnl
791: __devitem(fb,fb*,framebuffer device)dnl
792: __devitem(bktr,bktr*,video capturing)dnl
793: _mcdev(bktr,bktr*,bktr,{-major_bktr_c-},644)dnl
794: __devitem(tuner,tuner*,tuner device)dnl
795: _mkdev(tuner,tuner*,{-M tuner$U c major_tuner_c Add(Mult($U,2),16) 644-},644)dnl
1.7 todd 796: __devitem(pci,pci,PCI bus device)dnl
797: _mkdev(pci,pci,{-M pci c major_pci_c 0 664-},664)dnl
1.13 todd 798: __devitem(adb,adb,Apple Desktop bus event interface)dnl
799: _mkdev(adb,adb,{-M adb c major_adb_c 0-})dnl
1.15 todd 800: __devitem(pdc,pdc,PDC device)dnl
1.1 todd 801: _mkdev(local,local,{-test -s $T.local && sh $T.local-},666)dnl
802: dnl
803: divert(1)dnl
804: include(etc.MACHINE/MAKEDEV.md)dnl
805: dnl
806: dnl
807: divert(0)dnl
808: #!/bin/sh -
809: #
810: # THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT.
811: # generated from:
812: #
813: show_vers()dnl <-- now that all files are included, show versions
814: #
1.6 todd 815: {-#-} $Open{--}BSD$
1.1 todd 816: dnl
817: divert(2)dnl
818: PATH=/sbin:/usr/sbin:/bin:/usr/bin
819: T=$0
820:
821: # set this to echo for Echo-Only debugging
822: [ "$eo" ] || eo=
823:
824: hex()
825: {
826: case ${--}1 in
827: [0-9]) echo -n {-$-}1;;
828: 10) echo -n a;;
829: 11) echo -n b;;
830: 12) echo -n c;;
831: 13) echo -n d;;
832: 14) echo -n e;;
833: 15) echo -n f;;
834: esac
835: }
836: trunc()
837: {
838: # XXX pdksh can't seem to deal with locally scoped variables
839: # in ${foo#$bar} expansions
840: arg1="{-$-}1"
841: arg2="{-$-}2"
842: case {-$-}3 in
843: l) echo ${arg2#$arg1} ;;
844: r|*) echo ${arg1#$arg2} ;;
845: esac
846: }
847: unt()
848: {
849: # XXX pdksh can't seem to deal with locally scoped variables
850: # in ${foo#$bar} expansions
851: arg="{-$-}1"
852: tmp="${arg#[a-zA-Z]*}"
853: tmp="${tmp%*[a-zA-Z]}"
854: while [ "$tmp" != "$arg" ]
855: do
856: arg=$tmp
857: tmp="${arg#[a-zA-Z]*}"
858: tmp="${tmp%*[a-zA-Z]}"
859: done
860: echo $arg
861: }
862: dnl
1.5 todd 863: dnl dodisk(name,unit,blkmaj,chrmaj,unit,off[,stepping])
864: dnl arg: 1 2 3 4 5 6 7
1.1 todd 865: dnl
866: dodisk()
867: {
1.5 todd 868: n=Add(Mult(${5},${7:-16}),${6}) count=0
1.1 todd 869: RMlist="$RMlist {-$-}1{-$-}2? r{-$-}1{-$-}2?"
1.13 todd 870: [ 0$7 -ne 8 ] && l="i j k l m n o p"
871: for d in a b c d e f g h $l
1.1 todd 872: do
873: M {-$-}1{-$-}2$d b {-$-}3 Add($n,$count) 640
874: M r{-$-}1{-$-}2$d c {-$-}4 Add($n,$count) 640
875: let count=count+1
876: done
877: MKlist="$MKlist;chown root.operator {-$-}1{-$-}2? r{-$-}1{-$-}2?"
878: }
879: dnl
1.5 todd 880: dnl dodisk2(name,unit,blkmaj,chrmaj,unit,off[,stepping])
1.1 todd 881: dnl
882: dnl 1. name - prefix name of the device
883: dnl 2. unit - beginning unit number for block devices
884: dnl 3. blkmaj - block device major number
885: dnl 4. chrmaj - character device major number
886: dnl 5. unit - beginning unit number for character devices
887: dnl 6. off - offset from 0 for all minor numbers (see svnd for an example)
1.5 todd 888: dnl 7. step - optional, defaults to 16, number of partitions per device
1.1 todd 889: dnl
890: dodisk2()
891: {
1.5 todd 892: n=Add(Mult({-$-}5,${7:-16}),{-$-}6)
1.1 todd 893: M {-$-}1{-$-}2a b {-$-}3 $n 640 operator
894: M r{-$-}1{-$-}2a c {-$-}4 $n 640 operator
895: n=Add($n,2)
896: M {-$-}1{-$-}2c b {-$-}3 $n 640 operator
897: M r{-$-}1{-$-}2c c {-$-}4 $n 640 operator
898: }
899:
900: # M name b/c major minor [mode] [group]
901: RMlist="rm -f"
902: MKlist=":"
903: mkl() {
904: dnl
905: dnl uncomment if multi mknod happens
906: dnl
907: ifelse(1,0,
908: [ "${mklist[{-$-}1]}" ] && mklist[{-$-}1]="${mklist[{-$-}1]} {-$-}2 {-$-}3 {-$-}4 {-$-}5" || {
909: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
910: modes="$modes {-$-}1"
911: },
912: dnl
913: dnl non multi mknod
914: dnl
915: [ "${mklist[{-$-}1]}" ] && {
916: mklist[{-$-}1]="${mklist[{-$-}1]};mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
917: } || {
918: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
919: modes="$modes {-$-}1"
920: })
921: }
922: M() {
923: RMlist="$RMlist {-$-}1"
924: mkl ${5-666} {-$-}1 {-$-}2 {-$-}3 {-$-}4
925: mklist="$mklist {-$-}1"
926: G={-$-}{6:-wheel}
927: [ "{-$-}7" ] && {
928: MKlist="$MKlist;chown {-$-}7.{-$-}G {-$-}1"
929: } || {
930: case $G in
931: wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;;
932: esac
933: [ "${grplist[$g]}" ] && {
934: grplist[$g]="${grplist[$g]} {-$-}1"
935: } || {
936: groups="$groups $g"
937: grplist[$g]="chgrp $G {-$-}1"
938: }
939: }
940: return 0
941: }
942: divert(7)dnl
943: dnl
944: dnl there is no blank line at the end of etc.arch/MAKEDEV.md files, so add one
945: dnl on the following line:
946:
947: show_devs()dnl
948: dnl
949: divert(9)dnl
950: *)
951: echo $i: unknown device
952: ;;
953: esac
954: done
955: }
956: _recurse "$@"
957: if [ "$os" = "SunOS" ]; then
958: eo=transform
959: transform() {
960: case $mode in
961: 600) mask=077;;
962: 640) mask=027;;
963: 660) mask=007;;
964: 644) mask=022;;
965: 666) mask=0;;
966: 440) mask=227;;
967: esac
968: echo `echo "$@"|sed \
969: 's/mknod -m \([0-9]*\) /umask '$mask';mknod /;s/-m [0-9]* //g;\
970: s/operator/5/g;s/root.kmem/root.2/g;s/root\./root:/g'`
971: }
972: fi
973: list="$RMlist"
974: for mode in $modes; do
975: list="$list;${mklist[$mode]}"
976: done
977: for group in $groups; do
978: list="$list;${grplist[$group]}"
979: done
980: list="$list;$MKlist"
981: if [ "$eo" = "echo" -o "$eo" = "transform" ]; then
982: $eo "$list"
983: else
984: echo "$list" | sh
985: fi
986: divert(3)dnl
987: dnl
988: R() {
989: for i in "$@"
990: do
991: U=`unt $i`
992: [ "$U" ] || U=0
993:
994: case $i in
995: dnl