Annotation of src/etc/MAKEDEV.mi, Revision 1.28
1.1 todd 1: include(MAKEDEV.sub)dnl
2: dnl
1.28 ! todd 3: vers(a,{-$OpenBSD: MAKEDEV.mi,v 1.27 2002/02/14 04:37:15 todd Exp $-})dnl
1.1 todd 4: dnl
5: divert(1)dnl
6: {-#-}
7: {-#-} Copyright (c) 2001 Todd T. Fries <todd@OpenBSD.org>
8: {-#-} All rights reserved.
9: {-#-}
10: {-#-} Redistribution and use in source and binary forms, with or without
11: {-#-} modification, are permitted provided that the following conditions
12: {-#-} are met:
13: {-#-} 1. Redistributions of source code must retain the above copyright
14: {-#-} notice, this list of conditions and the following disclaimer.
15: {-#-} 2. The name of the author may not be used to endorse or promote products
16: {-#-} derived from this software without specific prior written permission.
17: {-#-}
18: {-#-} THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
19: {-#-} INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
20: {-#-} AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21: {-#-} THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
22: {-#-} EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23: {-#-} PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
24: {-#-} OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
25: {-#-} WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
26: {-#-} OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
27: {-#-} ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28: {-#-}
29: dnl
30: dnl Diversions: (upon termination, concatenated output queues)
31: dnl
32: dnl 0 - very top
33: dnl 1 - descriptions of devices
34: dnl 2 - init of script, function definitions, etc
35: dnl 3 - beginning of global recursive R() function
36: dnl 7 - body of MAKEDEV, device creations, etc
37: dnl 9 - end
38: dnl
39: dnl HOW TO ADD A DEVICE:
40: dnl
41: dnl In this file, you must use at least two macros:
42: dnl
43: dnl Use '__devitem(uniqueid,name-pattern,description)' to create an entry
44: dnl in the description at the top of the generated MAKEDEV file:
45: dnl
46: dnl __devitem(sca,sca*,Sugar Generic device)dnl
47: dnl
48: dnl This is ultimately shown as:
49: dnl
50: dnl # sca* Sugar Generic device
51: dnl
52: dnl Use '_mkdev(uniqueid,shell-pattern,{-shell-script-})dnl' to create
53: dnl a shell script fragment used to 'create' the device (be sure to match
54: dnl the uniqueid from above):
55: dnl
56: dnl _mkdev(sca,sca*,{-M sca$U c major_sca_c $U
57: dnl M rsca$U b major_sca_b Add($U,128)-})dnl
58: dnl
59: dnl This is ultimately expanded into:
60: dnl
61: dnl sca*) M sca$U c 24 $U
62: dnl M sca$U b 42 $(($U+128));;
63: dnl
64: dnl In the MAKEDEV.md file, add a '_DEV(uniqueid,charmajor,blockmajor)'
65: dnl entry:
66: dnl
67: dnl _DEV(sca,24,42)
68: dnl
69: dnl Final step is to add an entry to the 'all' entry below. For a short
70: dnl example:
71: dnl
1.4 todd 72: dnl _mkdev({-all-},{-all-},{-dnl
1.1 todd 73: dnl _dl({-std-},{-std-},{-sca-},{-sca0 sca1 sca2 sca3-})-})dnl
74: dnl
75: dnl would expand to:
76: dnl
77: dnl all)
78: dnl R std sca0 sca1 sca2 sca3
79: dnl ;;
80: dnl
81: dnl presuming '_DEV(sca..' and '_DEV(std)' were in the MAKEDEV.md file.
82: dnl
83: dnl
84: dnl Everything is 'automatically' added to 'MAKEDEV' based on whether or
85: dnl not the '_DEV()' entry has a corresponding _mkdev() and __devitem()
86: dnl entry in MAKEDEV.sub (this file).
87: dnl
88: dnl Note: be very wary of adding whitespace, carriage returns, or not
89: dnl finishing a macro with ')dnl' .. otherwise, extra blank lines show up
90: dnl in the output.
91: dnl
92: _mkdev(loc,local,{-test -s $T.local && sh $T.local-})dnl
93: dnl
94: __devtitle(make,Device "make" file. Valid arguments)dnl
1.4 todd 95: __devitem({-all-},{-all-},
96: {-makes all known devices{-,-} including local devices.
1.1 todd 97: {-#-} Tries to make the ``standard'' number of each type.-})dnl
98: dnl
99: dnl 'all' is special. The 'D'evice 'L'ist (or _dl) macro checks to see if
100: dnl a particular devices is in the MAKEDEV.md file, and if so, includes the
101: dnl necessary devices. Otherwise the devices are not included in the 'all'
102: dnl target. Note this keeps line lengths to less than column 70. For the
103: dnl gory details see the definition of '_dl' in MAKEDEV.sub
104: dnl
1.18 todd 105: twrget(all,attyB,sd,5,6,7,8,9)dnl
106: target(all,sd,0,1,2,3,4)dnl
107: target(all,mcd,0)dnl
108: twrget(all,fdesc,fd)dnl
1.28 ! todd 109: target(all,pty,0,1,2)dnl
1.22 todd 110: target(all,st,0,1)dnl
1.18 todd 111: target(all,ch,0)dnl
1.22 todd 112: target(all,cd,0,1)dnl
1.18 todd 113: target(all,mcd,0)dnl
114: target(all,std)dnl
115: target(all,vnd,0,1,2,3)dnl
116: target(all,ccd,0,1,2,3)dnl
117: target(all,raid,0,1,2,3)dnl
1.23 todd 118: target(all,rd,0)dnl
1.18 todd 119: target(all,rz,0,1,2,3,4)dnl
1.23 todd 120: target(all,hk,0,1,2,3)dnl
1.18 todd 121: target(all,hp,0,1,2,3)dnl
1.23 todd 122: target(all,ht,0)dnl
1.18 todd 123: target(all,ra,0,1,2,3)dnl
124: target(all,rb,0,1,2,3)dnl
1.23 todd 125: target(all,rl,0,1,2,3)dnl
1.18 todd 126: target(all,rx,0,1)dnl
1.23 todd 127: target(all,tm,0)dnl
128: target(all,ts,0)dnl
129: target(all,up,0,1,2,3)dnl
130: target(all,ut,0)dnl
131: target(all,wd,0,1,2,3)dnl
132: target(all,xy,0,1,2,3)dnl
133: target(all,xd,0,1,2,3)dnl
1.18 todd 134: twrget(all,flo,fd,0,0B,0C,0D,0E,0F,0G,0H)dnl
135: twrget(all,flo,fd,1,1B,1C,1D,1E,1F,1G,1H)dnl
136: twrget(all,aflo,fd,0,1,2,3)dnl
137: target(all,bpf,0,1,2,3,4,5,6,7,8,9)dnl
138: target(all,tun,0,1,2,3)dnl
139: target(all,pctr)dnl
140: target(all,pctr0)dnl
141: target(all,altq)dnl
142: target(all,pf)dnl
143: twrget(all,cry,crypto)dnl
144: target(all,apm)dnl
1.19 todd 145: twrget(all,tth,ttyh,0,1)dnl
1.18 todd 146: target(all,ttyA,0,1)dnl
147: target(all,ttyB,0,1,2,3,4,5)dnl
148: twrget(all,attyB,ttyB,0,1,2,3,4)dnl
149: target(all,tty0,0,1,2,3)dnl
150: twrget(all,mac_tty0,tty0,0,1)dnl
151: twrget(all,tzs,tty,a,b,c,d)dnl
152: twrget(all,czs,cua,a,b,c,d)dnl
153: target(all,ttyc,0,1,2,3,4,5,6,7)dnl
154: twrget(all,com,tty0,0,1,2,3)dnl
155: twrget(all,mac_ttye,ttye,0)dnl
156: target(all,ttye,0,1,2,3,4,5,6)dnl
157: target(all,lkm)dnl
158: twrget(all,mmcl,mmclock)dnl
159: target(all,lpt,0,1,2)dnl
160: twrget(all,lpt,lpa,0,1,2)dnl
161: target(all,joy,0,1)dnl
162: target(all,rnd,random)dnl
163: target(all,ses,0)dnl
164: target(all,uk,0)dnl
1.22 todd 165: target(all,ss,0,1)dnl
1.20 todd 166: target(all,st,0)dnl
1.18 todd 167: target(all,wt,0)dnl
168: target(all,wdt,0)dnl
169: target(all,xfs,0)dnl
170: twrget(all,au,audio,0)dnl
171: twrget(all,speak,speaker)dnl
172: target(all,asc,0)dnl
173: target(all,music,0)dnl
174: target(all,radio,0)dnl
175: target(all,tuner,0)dnl
176: target(all,rmidi,0,1,2,3,4,5,6,7)dnl
177: target(all,usbs)dnl
178: target(all,adb)dnl
179: target(all,iop,0,1)dnl
180: target(all,pci)dnl
181: twrget(all,wsmouse,wscons)dnl
182: twrget(all,btw,bwtwo,0)dnl
183: twrget(all,ctw,cgtwo,0)dnl
184: twrget(all,ctr,cgthree,0)dnl
185: twrget(all,cfr,cgfour,0)dnl
186: twrget(all,csx,cgsix,0)dnl
187: twrget(all,ceg,cgeight,0)dnl
188: twrget(all,cfo,cgfourteen,0)dnl
189: target(all,tcx,0)dnl
1.23 todd 190: twrget(all,grf_mac,grf,0,1,2,3)dnl
191: twrget(all,grf_amiga,grf,0,1,2,3,4,5,6)dnl
1.18 todd 192: target(all,par,0)dnl
193: twrget(all,amouse,mouse,0,1)dnl
194: twrget(all,akbd,kbd)dnl
1.27 todd 195: target(all,apci,0)dnl
1.18 todd 196: target(all,ppi,0)dnl
197: target(all,view0,0,1,2,3,4,5)dnl
198: target(all,local)dnl
199: dnl
1.1 todd 200: _mkdev(all,{-all-},{-dnl
1.18 todd 201: show_target(all)dnl
202: -})dnl
203: dnl
1.24 deraadt 204: __devitem(ramdisk,ramdisk,devices to be put on install floppies)dnl
1.1 todd 205: __devitem(std,{-std-},standard devices)dnl
206: dnl
1.18 todd 207: dnl
208: dnl
1.1 todd 209: dnl _std
210: dnl
211: dnl $1: tty
212: dnl $2: memstuff
213: dnl $3: ksyms
214: dnl $4: drum
215: dnl $5: klog
216: dnl
217: define({-_std-},{-dnl
218: std)
219: M console c 0 0 600
220: M tty c $1 0
221: M mem c $2 0 640 kmem
222: M kmem c $2 1 640 kmem
223: M null c $2 2
224: M zero c $2 12
225: M stdin c major_fdesc_c 0
226: M stdout c major_fdesc_c 1
227: M stderr c major_fdesc_c 2
228: M ksyms c $3 0 640 kmem
229: M drum c $4 0 640 kmem
230: M klog c $5 0 600-})dnl
231: dnl
1.18 todd 232: target(usb,usb,0,1)dnl
233: target(usb,urio,0)dnl
1.23 todd 234: twrget(usb,uscan,uscanner,0)dnl
1.18 todd 235: target(usb,uhid,0,1,2,3)dnl
236: target(usb,ulpt,0,1)dnl
237: target(usb,ugen,0,1)dnl
238: target(usb,utty,0,1)dnl
239: dnl
1.1 todd 240: __devitem({-usbs-},usbs,make USB devices)dnl
241: _mkdev(usbs,usbs,{-dnl
1.18 todd 242: show_target({-usb-})dnl
243: -})dnl
1.1 todd 244: __devtitle(tap,Tapes)dnl
245: __devitem(wt,{-wt* -},QIC-interface (e.g. not SCSI) 3M cartridge tape)dnl
246: _mkdev(wt,wt*,
247: {-name=wt
248: n=Mult($U,8) m=Add($n,4)
249: M $name$U b major_wt_b $n 640 operator
250: M r$name$U c major_wt_c $n 640 operator
251: M n$name$U b major_wt_b $m 640 operator
252: M nr$name$U c major_wt_c $m 640 operator-})dnl
253: __devitem(tz,tz*,{-SCSI tapes{-,-} DEC TK50 cartridge tape-})dnl
254: __devitem(st,{-st*-},SCSI tapes)dnl
255: _mkdev(st,st*,{-n=Mult($U,16)
256: for pre in " " n e en
257: do
258: M ${pre}st$U b major_st_b $n 660 operator
259: M ${pre}rst$U c major_st_c $n 660 operator
260: n=Add($n,1)
261: done-})dnl
262: __devitem(ct,ct*,HP300 HP-IB cartridge tape)dnl
263: __devitem(mt,mt*,(Magnetic) 9-track reel tape)dnl
1.23 todd 264: __devitem(ht,ht*,massbus tm03 & tu??)dnl
265: __devitem(tm,tm*,unibus tm11 & te10 emulations (e.g. Emulex tc-11))dnl
266: __devitem(ts,ts*,unibus ts11)dnl
267: __devitem(ut,ut*,unibus tu45 emulations (e.g.si 9700))dnl
1.1 todd 268: __devtitle(dis,Disks)dnl
269: __devitem(rz,rz*,SCSI disks)dnl
270: __devitem(sd,{-sd*-},SCSI disks{-,-} includes flopticals)dnl
271: __devitem(hd,{-hd*-},HP300 HP-IB disks)dnl
272: __devitem(cd,{-cd*-},SCSI cdrom drives)dnl
273: __devitem(acd,acd*,ATAPI cdrom drives)dnl
1.6 todd 274: _mkdev(cd,cd*,{-dodisk2 cd $U major_cd_b major_cd_c $U 0{--}ifstep(cd)-})dnl
275: __devitem(mcd,mcd*,Mitsumi cdrom drives)dnl
276: _mkdev(mcd,mcd*,{-dodisk2 mcd $U major_mcd_b major_mcd_c $U 0{--}ifstep(mcd)dnl
1.1 todd 277: -})dnl
278: __devitem(ch,{-ch*-},SCSI media changer)dnl
279: _mcdev(ch,ch*,ch,{-major_ch_c-},660,operator)dnl
280: __devitem(uk,uk*,SCSI Unknown device)dnl
281: _mcdev(uk,uk*,uk,{-major_uk_c-},640,operator)dnl
282: __devitem(ss,ss*,SCSI scanners)dnl
283: _mkdev(ss,ss*,{-M ss$U c major_ss_c $U 440 operator
284: RMlist="$RMlist scan$U"
285: MKlist="$MKlist;umask 77;ln -s ss$U scan$U"-})dnl
286: __devitem(ses,ses*,SES/SAF-TE SCSI devices)dnl
287: _mkdev(ses,ses*,{-M ses$U c major_ses_c $U 640 operator-})dnl
288: __devitem(ramd,ramdisk,makes all devices for a ramdisk kernel)dnl arc
1.20 todd 289: _mkdev(ramd,ramdisk,{-dnl
290: show_target(ramd)dnl
291: -})dnl
1.18 todd 292: ifelse(MACHINE,mvmeppc,{-dnl
293: target(ramd,tty0,0,1,2,3)dnl
294: twrget(ramd,wsdisp,ttyC,0)dnl
295: target(ramd,rd,0)dnl
296: target(ramd,wd,0,1,2,3)dnl
297: target(ramd,sd,0,1,2,3,4)dnl
1.21 todd 298: target(ramd,cd,0,1)dnl
299: target(ramd,st,0,1)dnl
300: target(ramd,bpf,0)dnl
301: target(ramd,rd,0)dnl
302: -})dnl
303: ifelse(MACHINE,sparc,{-dnl
304: target(ramd,fd,0)dnl
305: target(ramd,sd,0,1,2,3)dnl
306: target(ramd,rd,0)dnl
307: target(ramd,cd,0)dnl
308: -})dnl
309: ifelse(MACHINE,sparc64,{-dnl
310: target(ramd,fd,0)dnl
311: target(ramd,rd,0)dnl
312: target(ramd,sd,0,1,2,3)dnl
313: target(ramd,wd,0,1,2,3)dnl
314: target(ramd,cd,0,1)dnl
1.18 todd 315: target(ramd,st,0,1)dnl
1.21 todd 316: target(ramd,bpf,0)dnl
1.23 todd 317: twrget(all,s64_tzs,tty,a,b,c,d)dnl
318: twrget(all,s64_czs,cua,a,b,c,d)dnl
319: __devitem(s64_tzs,tty[a-z]*,Zilog 8530 Serial Port)dnl
320: __devitem(s64_czs,cua[a-z]*,Zilog 8530 Serial Port)dnl
321: _mkdev(s64_tzs,{-tty[a-z]-},{-u=${i#tty*}
322: case $u in
323: a) n=0 ;;
324: b) n=1 ;;
325: c) n=2 ;;
326: d) n=3 ;;
327: *) echo unknown tty device $i ;;
328: esac
329: M tty$u c major_s64_tzs_c $n 660 dialer uucp-})dnl
330: _mkdev(s64_czs,cua[a-z],{-u=${i#cua*}
331: case $u in
332: a) n=0 ;;
333: b) n=1 ;;
334: c) n=2 ;;
335: d) n=3 ;;
336: *) echo unknown cua device $i ;;
337: esac
338: M cua$u c major_s64_czs_c Add($n,128) 660 dialer uucp-})dnl
1.18 todd 339: -})dnl
340: ifelse(MACHINE,i386,{-dnl
341: target(ramd,tty0,0,1,2,3)dnl
342: twrget(ramd,wsdisp,ttyC,0)dnl
343: target(ramd,wt,0)dnl
344: target(ramd,fd,0)dnl
345: target(ramd,rd,0)dnl
346: target(ramd,wd,0,1,2,3)dnl
347: target(ramd,sd,0,1,2,3)dnl
1.21 todd 348: target(ramd,cd,0,1)dnl
1.18 todd 349: target(ramd,st,0,1)dnl
350: target(ramd,mcd,0)dnl
351: -})dnl
1.21 todd 352: ifelse(MACHINE,alpha,{-dnl
353: target(ramd,sd,0,1,2)dnl
354: target(ramd,wd,0)dnl
355: target(ramd,tty0,0,1)dnl
356: target(ramd,st,0)dnl
357: target(ramd,cd,0)dnl
358: target(ramd,ttyB,0,1)dnl
359: target(ramd,ttyE,0,1)dnl
360: -})dnl
361: ifelse(MACHINE,amiga,{-dnl
362: target(ramd,kbd)dnl
363: target(ramd,pty,0)dnl
364: target(ramd,tty0,0)dnl
365: target(ramd,ttyA,0,1)dnl
366: target(ramd,ttyB,0,1)dnl
367: target(ramd,ttye,0,1,2,3,4,5,6)dnl
368: target(ramd,cd,0,1)dnl
369: target(ramd,sd,0,1,2,3)dnl
370: target(ramd,st,0,1)dnl
371: target(ramd,fd,0,1)dnl
372: target(ramd,wd,0,1)dnl
373: target(ramd,rd,0)dnl
374: -})dnl
375: ifelse(MACHINE,hp300,{-dnl
1.27 todd 376: _mkdev(st_hp300,ct*|mt*|st*,
377: {-case $i in
378: ct*) name=ct blk=major_ct_b chr=major_ct_c;;
379: mt*) name=mt blk=major_mt_b chr=major_mt_c;;
380: st*) name=st blk=major_st_hp300_b chr=major_st_hp300_c;;
381: esac
382: case $U in
383: [0-7])
384: four=Add($U,4) eight=Add($U,8)
385: twelve=Add($U,12) twenty=Add($U,20)
386: M r$name$U c $chr $U 660 operator
387: M r$name$four c $chr $four 660 operator
388: M r$name$eight c $chr $eight 660 operator
389: M r$name$twelve c $chr $twelve 660 operator
390: MKlist="$MKlist;ln r$name$four nr$name$U";: sanity w/pdp11 v7
391: MKlist="$MKlist;ln r$name$twelve nr$name$eight";: ditto
392: RMlist="$RMlist nr$name$U nr$name$eight"
393: ;;
394: *)
395: echo bad unit for tape in: $1
396: ;;
397: esac-})dnl
398: __devitem(st_hp300,st*,Exabyte tape)dnl
399: __devitem(grf,grf*,raw interface to HP300 graphics devices)dnl
400: target( all, grf, 0)dnl
401: dnl XXX target( all, hil, 0,1,2,3,4,5,6,7)dnl
402: target( all, hil, )dnl
403: twrget( all, st_hp300,st,0,1)dnl
404: target( all, dca, 0,1)dnl
405: target( all, dcm, 0,1,2,3)dnl
406: target( all, hd, 0,1,2)dnl
407: target( all, ct, 0,1)dnl
408: target( all, ite, 0)dnl
409: target(ramd, ct, 0,1)dnl
410: target(ramd, hd, 0,1,2)dnl
411: target(ramd, sd, 0,1,2)dnl
412: target(ramd, rd, 0,1)dnl
413: target(ramd, pty, 0)dnl
414: target(ramd, hil, )dnl
415: target(ramd, grf, 0)dnl
416: target(ramd, apci, 0)dnl
417: target(ramd, ite, 0)dnl
418: target(ramd, dca, 0)dnl
419: target(ramd, dcm, 0,1)dnl
420: target(ramd, bpf, 0,1)dnl
421: target(ramd, tun, 0,1)dnl
1.21 todd 422: -})dnl
423: ifelse(MACHINE,hppa,{-dnl
424: target(ramd,st,0,1)dnl
425: target(ramd,sd,0,1,2,3)dnl
426: target(ramd,rd,0,1)dnl
427: target(ramd,pty,0)dnl
428: target(ramd,hil)dnl
429: target(ramd,com,0,1)dnl
430: target(ramd,bpf,0,1)dnl
431: target(ramd,tun,0,1)dnl
432: -})dnl
433: ifelse(MACHINE,mac68k,{-dnl
434: target(ramd,sd,0,1,2,3)dnl
435: target(ramd,st,0,1)dnl
436: target(ramd,adb)dnl
437: target(ramd,asc,0)dnl
438: target(ramd,grf,0,1)dnl
439: target(ramd,ttye,0)dnl
440: twrget(ramd,mac_tty0,tty0,0,1)dnl
441: target(ramd,pty,0)dnl
442: -})dnl
1.25 drahn 443: ifelse(MACHINE,macppc,{-dnl
1.21 todd 444: target(ramd,sd,0,1,2,3,4)dnl
1.25 drahn 445: target(ramd,wd,0,1,2,3,4)dnl
1.21 todd 446: target(ramd,st,0,1)dnl
447: target(ramd,cd,0,1)dnl)dnl
448: target(ramd,rd,0)dnl
449: target(ramd,ttyE,0)dnl
450: target(ramd,tty0,0,1)dnl
451: target(ramd,pty,0)dnl
452: -})dnl
453: ifelse(MACHINE,vax,{-
1.27 todd 454: target( all, hd, 0,1,2)dnl
1.21 todd 455: target(ramd,fd,0)dnl
456: target(ramd,sd,0,1,2,3)dnl
457: target(ramd,rd,0)dnl
458: target(ramd,cd,0)dnl
459: target(ramd,bpf,0)dnl
460: -})dnl
461: target(ramd,std)dnl
1.20 todd 462: target(ramd,random)dnl
463: target(ramd,bpf,0)dnl
1.1 todd 464: __devitem(rd,{-rd*-},"ramdisk" pseudo-disks)dnl
1.6 todd 465: _mkdev(rd,rd*,{-dodisk2 rd $U major_rd_b major_rd_c $U 0{--}ifstep(rd)-})dnl
1.1 todd 466: __devitem(xd,xd*,Xylogic 753/7053 disks)dnl
467: __devitem(xy,xy*,{- Xylogic 450/451 disks-})dnl
468: __devitem(flo,{-fd*-},{-Floppy disk drives (3 1/2"{-,-} 5 1/4")-})dnl
469: _mkdev(flo,fd*,
470: {-typnam=$U${i#fd[01]*}
471: case $typnam in
472: 0|1) typnum=0;; # no type specified, assume A
1.26 deraadt 473: *A) typnum=0; typnam=0;;
474: *B) typnum=1;;
475: *C) typnum=2;;
476: *D) typnum=3;;
477: *E) typnum=4;;
478: *F) typnum=5;;
479: *G) typnum=6;;
480: *H) typnum=7;;
481: *) echo bad type $typnam for $i; exit 1;;
1.1 todd 482: esac
483: case $U in
484: 0|1) blk=major_flo_b; chr=major_flo_c;;
485: *) echo bad unit $U for $i; exit 1;;
486: esac
487: nam=fd${typnam}
488: n=Add(Mult($U,128),Mult($typnum,16))
489: M ${nam}a b $blk $n 640 operator
490: M ${nam}b b $blk Add($n,1) 640 operator
491: M ${nam}c b $blk Add($n,2) 640 operator
492: M r${nam}a c $chr $n 640 operator
493: M r${nam}b c $chr Add($n,1) 640 operator
494: M r${nam}c c $chr Add($n,2) 640 operator-},664)dnl
1.24 deraadt 495: __devitem(aflo,ramdisk,devices needed for install floppies)dnl
1.1 todd 496: _mkdev(aflo,fd*,{-case $U in 0|1|2|3)
497: M fd${U}a b major_aflo_b Mult($U,16) 640 operator
498: M fd${U}b b major_aflo_b Add(Mult($U,16),1) 640 operator
499: M rfd${U}a c major_aflo_c Mult($U,16) 640 operator
500: M rfd${U}b c major_aflo_c Add(Mult($U,16),1) 640 operator;;
501: *) echo bad unit for floppy disk in: $i;;
502: esac-})dnl
503: __devitem(iop,iop*,I2O controller device)dnl
504: _mcdev(iop,iop*,iop,{-major_iop_c-},660)dnl
505: __devitem(wdt,wdt0,watchdog timer)dnl
506: _mcdev(wdt,wdt0,wdt,{-major_wdt_c-},440,operator)dnl
507: __devitem(local,local,configuration specific devices)dnl
508: __devitem(wd,{-wd*-},{-"winchester" disk drives (ST506,IDE,ESDI,RLL,...)-})dnl
509: __devitem(ccd,ccd*,concatenated disk devices)dnl
510: __devitem(raid,raid*,RAIDframe disk devices)dnl
511: __devitem(vnd,vnd*,"file" pseudo-disks)dnl
1.6 todd 512: _mkdev(vnd,vnd*,{-dodisk vnd $U major_vnd_b major_vnd_c $U 0{--}ifstep(vnd)
513: dodisk svnd $U major_vnd_b major_vnd_c $U 128{--}ifstep(vnd)-})dnl
1.18 todd 514: __devitem(ra,ra*,{-MSCP disks (ra??, hd??)-})dnl
515: __devitem(hp,hp*,{-massbuss rm??-})dnl
516: __devitem(hk,hk*,{-unibus rk06 and rk07-})dnl
517: __devitem(up,up*,{-other unibus devices (e.g. on Emulex sc-21v controller)-})dnl
518: __devitem(rb,rb*,{-730 idc w/ rb80 and/or rb02-})dnl
519: __devitem(rx,rx*,{-MSCP floppy disk (rx33/50/...)-})dnl
520: __devitem(rl,rl*,{-unibus r102-})dnl
521: __devitem(hd,hd*,{-HDC9224 hd disks on VS2000-})dnl
1.1 todd 522: dnl
523: dnl For normal disk devices, add a disk_q entry; anything else define like
524: dnl the rest (such as vnd above).
525: dnl
1.18 todd 526: disk_q({-ccd-})dnl
527: disk_q({-hd-})dnl
528: disk_q({-hk-})dnl
529: disk_q({-hp-})dnl
530: disk_q({-ra-})dnl
531: disk_q({-raid-})dnl
532: disk_q({-rb-})dnl
533: disk_q({-rl-})dnl
534: disk_q({-rx-})dnl
535: disk_q({-sd-})dnl
1.1 todd 536: disk_q({-xy-})dnl
537: disk_q({-xd-})dnl
1.18 todd 538: disk_q({-up-})dnl
539: disk_q({-wd-})dnl
1.1 todd 540: disk_q({-rz-})dnl
541: dnl
542: __devitem(loc,local,configuration specific devices)dnl
543: _mkdev(loc,local,{-test -s $T.local && sh $T.local-})dnl
544: _mkdev({-disks-},{-undefine({-C_ase-})show_disks()undefine({-C_ase-})-},
545: {-case $i in
546: show_disks2()dnl
1.6 todd 547: esac-})dnl
1.1 todd 548: __mkdev({-disks-}){--}dnl
549: dnl
550: __devtitle(cons,Console ports)dnl
551: __devitem(ttyv0,ttyv0,pccons or pcvt screen 0)dnl
552: __devitem(ttyv,ttyv*,pcvt)dnl
553: __devitem(ttye,ttye*,ite bitmapped consoles)dnl
1.13 todd 554: __devitem(mac_ttye,ttye*,ite bitmapped consoles)dnl
1.1 todd 555: __devitem(wscons,ttyC0,wscons screen 0)dnl
556: _mkdev({-wscons-},{-wscons-},{-dnl
557: _dl(dnl
558: {-wscons-},{-ttyCcfg-},
1.3 todd 559: {-wsdisp-},{-ttyC0 ttyC1 ttyC2 ttyC3 ttyC4 ttyC5 ttyC6 ttyC7 ttyC8 ttyC9-},
560: {-wsdisp-},{-ttyCa ttyCb-},
1.1 todd 561: {-wsmux-},{-wsmux-},
562: {-wskbd-},{-wskbd0 wskbd1 wskbd2 wskbd3-},
563: {-wsmouse-},{-wsmouse0 wsmouse1 wsmouse2 wsmouse3-})-})dnl
1.3 todd 564: __devitem(wsdisp,ttyC*,wscons virtual consoles)dnl
565: _mkdev({-wsdisp-},ttyC*,{-U=${i##ttyC}
566: case $U in
1.8 todd 567: [0-9a-f]) M ttyC$U c major_wsdisp_c {-$(( 16#$U ))-} 600;;
568: cfg) M ttyCcfg c major_wsdisp_c 255 600;;
1.3 todd 569: *) echo bad unit $U for $i; exit 1;;
1.6 todd 570: esac-})dnl
1.1 todd 571: __devitem(wskbd,wskbd*,wscons keyboards)dnl
572: _mkdev(wskbd,wskbd*,{-M wskbd$U c major_wskbd_c $U 600-})dnl
573: __devitem(wsmux,wsmux,wscons keyboard/mouse mux devices)dnl
574: _mkdev(wsmux,wsmux|wsmouse|wskbd,{-M wsmouse c major_wsmux_c 0 600
575: M wskbd c major_wsmux_c 1 600-})dnl
576: __devitem(pcons,console,PROM console)dnl
577: __devtitle(point,Pointing devices)dnl
578: __devitem(wsmouse,wsmouse*,wscons mice)dnl
579: _mkdev(wsmouse,wsmouse*,{-M wsmouse$U c major_wsmouse_c $U 600-})dnl
580: __devitem(quad,quadmouse,"quadrature mouse")dnl
581: __devtitle(pty,Pseudo terminals)dnl
582: __devitem(tty,tty*,set of 16 slave psuedo terminals)dnl
583: __devitem(pty,pty*,set of 16 master pseudo terminals)dnl
584: _mkdev(pty,pty*,{-case $U in
585: 0) off=0 name=p;;
586: 1) off=16 name=q;;
587: 2) off=32 name=r;;
588: 3) off=48 name=s;;
589: 4) off=64 name=t;;
590: 5) off=80 name=u;;
591: 6) off=96 name=v;;
592: 7) off=112 name=w;;
593: 8) off=128 name=x;;
594: 9) off=144 name=y;;
595: 10) off=160 name=z;;
596: 11) off=176 name=P;;
597: 12) off=192 name=Q;;
598: 13) off=206 name=R;;
599: 14) off=224 name=S;;
600: 15) off=240 name=T;;
601: *) echo bad unit for pty in: $i; continue;;
602: esac
603: n=0
604: while [ $n -lt 16 ]
605: do
606: nam=$name$(hex $n)
607: M tty$nam c major_tty_c Add($off,$n)
608: M pty$nam c major_pty_c Add($off,$n)
609: n=Add($n,1)
610: done-})dnl
611: __devitem(dc,dc*,{-4 channel serial interface (keyboard{-,-} mouse{-,-}modem{-,-} printer)-})dnl
612: __devtitle(prn,Printers)dnl
613: __devitem(par,par*,motherboard parallel port)dnl
614: __devitem(lpt,lpt*,IEEE 1284 centronics printer)dnl
615: _mkdev(lpt,lpt*|lpa*,
616: {-case $i in
617: lpt*) n=lpt f=0;;
618: lpa*) n=lpa f=128;;
619: esac
620: M $n$U c major_lpt_c Add($U,$f) 600-})dnl
621: __devitem(lpa,lpa*,interruptless lp)dnl
622: __devitem(ppi,ppi*,HP-IB plotters)dnl
623: __devtitle({-usb-},USB devices)dnl
624: __devitem({-usb-},usb*,Bus control devices used by usbd for attach/detach)dnl
625: _mkdev({-usb-},usb*,{-[ "$i" = "usb" ] && u= || u=$U
626: M usb$u c major_usb_c $U 660-})dnl
627: __devitem(uhid,uhid*,Generic HID devices)dnl
628: _mcdev({-uhid-},uhid*,{-uhid-},{-major_uhid_c-},660)dnl
629: __devitem(ulpt,ulpt*,Printer devices)dnl
630: _mcdev({-ulpt-},ulpt*,{-ulpt-},{-major_ulpt_c-},660)dnl
631: __devitem(utty,utty*,Serial ports)dnl
632: _mcdev({-utty-},utty*,{-utty-},{-major_utty_c-},660)dnl
633: __devitem(urio,urio*,Diamond Multimedia Rio 500)dnl
634: _mcdev({-urio-},urio*,{-urio-},{-major_urio_c-},660)dnl
1.2 todd 635: __devitem(uscan,uscanner*,Scanners)dnl
636: _mcdev({-uscan-},uscanner*,{-uscanner-},{-major_uscan_c-},660)dnl
1.1 todd 637: __devitem(ugen,ugen*,Generic device)dnl
638: _mkdev(ugen,ugen*,{-n=Mult($U,16)
639: for j in 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
640: do
641: M ugen$U.$j c major_ugen_c Add($n,$j) 660
642: done-})dnl
643: __devtitle(cpu,Cpus)dnl
644: __devitem(cpu,cpu*,cpus)dnl
645: __devtitle(call,Call units)dnl
646: __devtitle(term,Terminal ports)dnl
647: __devtitle(termp,Terminal multiplexers)dnl
648: __devitem(dca,dca*,HP200/300 single port serial interface)dnl
649: __devitem(dcm,dcm*,HP200/300 4 port serial mux interface)dnl
650: __devitem(apci,apci*,HP400 4 port serial mux interface)dnl
651: __devitem({-com-},{-tty0*-},NS16x50 serial ports)dnl
652: _mkdev(com,{-tty0*-},{-M tty$U c major_com_c $U 660 dialer uucp
653: M cua$U c major_com_c Add($U,128) 660 dialer uucp-})dnl
654: __devitem(ttyc,ttyc*,Cyclades serial ports)dnl
655: __devitem(tzs,tty[a-z]*,Zilog 8530 Serial Port)dnl
656: _mkdev(tzs,{-tty[a-z]-},{-u=${i#tty*}
657: case $u in
658: a) n=0 ;;
659: b) n=1 ;;
660: c) n=4 ;;
661: d) n=5 ;;
662: *) echo unknown tty device $i ;;
663: esac
664: M tty$u c major_tzs_c $n 660 dialer uucp-})dnl
665: __devitem(tth,ttyh*,Sab82532 serial devices)dnl
666: _mkdev(tth,ttyh*,{-M ttyh$U c major_tth_c $U 660 dialer uucp-})dnl
667: __devitem(czs,cua[a-z]*,Zilog 8530 Serial Port)dnl
668: _mkdev(czs,cua[a-z],{-u=${i#cua*}
669: case $u in
670: a) n=0 ;;
671: b) n=1 ;;
672: c) n=4 ;;
673: d) n=5 ;;
674: *) echo unknown cua device $i ;;
675: esac
676: M cua$u c major_czs_c Add($n,128) 660 dialer uucp-})dnl
677: __devitem(arm_tty,tty*,{-alias for PC COM ports{-,-} this is what the system really wants-})dnl
678: __devitem(tty0,tty00,standard serial port)dnl
1.13 todd 679: __devitem(mac_tty0,tty00,standard serial port)dnl
1.1 todd 680: __devitem(ttyA,ttyA*,mfc serial ports)dnl
681: __devitem(attyB,ttyB*,ISA COM ports)dnl amiga
682: __devitem(ttyz,tty[a-d],onboard zs serial ports)dnl
683: __devitem(cuaz,cua[a-d],onboard zs serial ports)dnl
684: __devitem(ttyB,ttyB?,DEC 3000 ZS8530 ("scc") serial ports)dnl
685: __devitem(scc,scc*,82530 serial interface)dnl
686: __devitem(arc_ttyC,ttyC0,pccons)dnl
687: __devitem(i386_ttyC,ttyC*,pcvt)dnl
688: __devitem(ttyC,ttyC?,{-AlphaStation NS16550 ("com serial ports")-})dnl
689: __devitem(ttyE,ttyE?,Workstation console (framebuffer & keyboard) tty emulators)dnl
690: __devitem(ser02,ser02,{-serial2 port (channel A on 8530)-})dnl
691: __devitem(mdm02,mdm02,{-modem2 port (channel B on 8530)-})dnl
692: __devtitle(spec,Special purpose devices)dnl
693: __devitem(apm,apm ,power management device)dnl
694: _mkdev(apm,apm*,{-M apm c major_apm_c 0 644
695: M apmctl c major_apm_c 8 644-})dnl
696: __devitem(pcmcia,pcmcia*,PCMCIA card drivers)dnl
697: __devitem(pctr,pctr*,PC Performance Tuning Register access device)dnl
698: _mkdev(pctr,pctr,{-M pctr c major_pctr_c 0 644-})dnl
699: __devitem(au,audio*,audio device)dnl
700: _mkdev(au,audio*,{-M sound$U c major_au_c $U
701: M mixer$U c major_au_c Add($U,16)
702: M audio$U c major_au_c Add($U,128)
703: M audioctl$U c major_au_c Add($U,192)
704: MKlist="$MKlist;[ -e audio ] || ln -s audio$U audio"
705: MKlist="$MKlist;[ -e mixer ] || ln -s mixer$U mixer"
706: MKlist="$MKlist;[ -e sound ] || ln -s sound$U sound"
707: MKlist="$MKlist;[ -e audioctl ] || ln -s audioctl$U audioctl"-})dnl
1.13 todd 708: __devitem(asc,asc*,ASC Audio device)dnl
709: _mkdev(asc,asc*,{-M asc$U major_asc_c 0-})dnl
1.1 todd 710: __devitem(music,music*,midi devices)dnl
711: _mkdev(music,music*,{-M music$U c major_music_c $U
712: M sequencer$U c major_music_c Add($U,128)
713: MKlist="$MKlist;[ -e music ] || ln -s music$U music"
714: MKlist="$MKlist;[ -e sequencer ] || ln -s sequencer$U sequencer"-})dnl
1.8 todd 715: __devitem(radio,radio*,FM tuner device)dnl
1.23 todd 716: _mkdev(radio,radio*,{-M radio$U c major_radio_c $U
1.8 todd 717: MKlist="$MKlist;[ -e radio ] || ln -s radio$U radio"-})dnl
1.1 todd 718: __devitem(fdesc,fd,makes fd/* for the fdescfs)dnl
719: _mkdev(fdesc,fd,{-RMlist="mkdir -p fd;$RMlist" n=0
720: while [ $n -lt 64 ];do M fd/$n c major_fdesc_c $n;n=Add($n,1);done
721: MKlist="$MKlist;chmod 555 fd"-})dnl
722: __devtitle(graph,Graphics devices)dnl
1.23 todd 723: __devitem(grf_mac,grf*,{-custom chip (grf0){-,-} Retina Z2/Z3 (grf1/grf2){-,-}
1.1 todd 724: {-#-} Cirrus boards (grf3){-,-} A2410 (grf4) video or
725: {-#-} CyberVision 64 (grf5)-})dnl
726: __devitem(grf_amiga,grf*,{-Motherboard bitmapped video.-})dnl
727: __devitem(ite,ite*,terminal emulator interface to HP300 graphics devices)dnl
728: __devitem({-hil-},{-hil-},HP300 HIL input devices)dnl
729: __devitem(oppr,openprom)dnl
730: _cdev(oppr,openprom,70,0)dnl
731: __devitem(btw,bwtwo*)dnl
732: _mcdev(btw,bwtwo*,bwtwo,{-major_btw_c-},666)dnl
733: __devitem(ctw,cgtwo*)dnl
734: _mcdev(ctw,cgtwo*,cgtwo,{-major_ctw_c-},666)dnl
735: __devitem(ctr,cgthree*)dnl
736: _mcdev(ctr,cgthree*,cgthree,{-major_ctr_c-},666)dnl
737: __devitem(cfr,cgfour*)dnl
738: _mcdev(cfr,cgfour*,cgfour,{-major_cfr_c-},666)dnl
739: __devitem(csx,cgsix*)dnl
740: _mcdev(csx,cgsix*,cgsix,{-major_csx_c-},666)dnl
741: __devitem(ceg,cgeight*)dnl
742: _mcdev(ceg,cgeight*,cgeight,{-major_ceg_c-},666)dnl
743: __devitem(cfo,cgfourteen*)dnl
744: _mcdev(cfo,cgfourteen*,cgfourteen,{-major_cfo_c-})dnl
745: __devitem(tcx,tcx*)dnl
746: _mcdev(tcx,tcx*,tcx,{-major_tcx_c-})dnl
747: __devitem(cry,crypto,hardware crypto access driver)dnl
748: _mkdev(cry,crypto,{-M crypto c major_cry_c-} 0)dnl
749: __devitem(pf,pf*,Packet Filter)dnl
750: _mkdev(pf,{-pf*-},{-M pf c major_pf_c 0 600-})dnl
751: __devitem(bpf,bpf*,Berkeley Packet Filter)dnl
752: _mkdev(bpf,{-bpf*-},{-M bpf$U c major_bpf_c $U 600-},600)dnl
753: _mkdev(tun,{-tun*-},{-M tun$U c major_tun_c $U 600-},600)dnl
754: __devitem(altq,altq/,ALTQ control interface)dnl
755: _mkdev(altq,altq,{-RMlist="mkdir -p altq;$RMlist"
756: for d in altq cbq wfq afm fifoq red rio localq hfsc cdnr blue priq; do
757: M altq/$d c major_altq_c $U 644
758: U=Add($U,1)
759: done-})dnl
760: __devitem(speak,speaker,pc speaker)dnl
1.15 todd 761: _mkdev(speak,speaker,{-M speaker c major_speak_c 0 600-})dnl
1.1 todd 762: __devitem(kbd,kbd,keyboard (provides events, for X11))dnl
763: _cdev(kbd,kbd,{-major_kbd_c-},0,600)dnl
764: __devitem(kbd_atari,kbd,Atari keyboard)dnl
765: __devitem(akbd,kbd,Amiga keyboard)dnl
766: __devitem(rkbd,kbd,raw keyboard)dnl
767: __devitem(kbdctl,kbdctl,keyboard control)dnl
768: __devitem(beep,beep,riscpc speaker)dnl
769: __devitem(iic,iic*,IIC bus device)dnl
770: __devitem(rtc,rtc*,RTC device)dnl
771: __devitem(view,view*,generic interface to graphic displays)dnl
772: __devitem(aconf,aconf,{-autoconfig information (not yet)-})dnl
773: __devitem(mouse-,mouse-*,"mouse link")dnl
774: __devitem(mouse,mouse,mouse (provides events, for X11))dnl
775: __devitem(amouse,mouse*,Amiga mice)dnl
776: __devitem(lkm,lkm,loadable kernel modules interface)dnl
777: _cdev(lkm,lkm,{-major_lkm_c-},0,640,kmem)dnl
778: __devitem(mmcl,mmclock,memory mapped clock)dnl
779: __devitem(tun,tun*,network tunnel driver)dnl
780: __devitem(rnd,*random,inkernel random data source)dnl
781: _mkdev(rnd,*random,{-n=0
782: for pre in " " s u p a
783: do
784: M ${pre}random c major_rnd_c $n 644
785: n=Add($n,1)
786: done-},644)dnl
787: __devitem(joy,joy*,joystick driver)dnl
1.8 todd 788: _mcdev(joy,joy*,joy,{-major_joy_c-},666)dnl
1.1 todd 789: __devitem(mag,magma*,magma card (makes 16 tty and 2 bpp))dnl
1.18 todd 790: __devitem(bppmag,bppmag[mno],magma parallel port device)dnl
1.17 jason 791: __devitem(spif,spif*,spif card (makes 8 tty and 1 bpp))dnl
1.18 todd 792: __devitem(bppsp,bpp[jkl],spif parallel port device)dnl
793: _mkdev(mag,magma*,{-case $U in
794: 0) offset=0 nam=m;;
795: 1) offset=16 nam=n;;
796: 2) offset=32 nam=o;;
797: *) echo "bad unit for $i: $U"; exit 127;;
798: esac
799: offset=Mult($U,64)
800: n=0
801: while [ $n -lt 16 ]
802: do
803: name=${nam}`hex $n`
804: M tty$name c major_mag_c Add($offset,$n) 660 dialer uucp
805: n=Add($n,1)
806: done
807: M bpp${nam}0 c major_bppmag_c Add($offset,0) 600
808: M bpp${nam}1 c major_bppmag_c Add($offset,1) 600-})dnl
809: _mkdev(spif,spif*,{-case $U in
810: 0) offset=0 nam=j;;
811: 1) offset=16 nam=k;;
812: 2) offset=32 nam=l;;
813: *) echo "bad unit for $i: $U"; exit 127;;
814: esac
815: offset=Mult($U,64)
816: n=0
817: while [ $n -lt 8 ]
818: do
819: name=${nam}`hex $n`
820: M tty$name c major_spif_c Add($offset,$n) 660 dialer uucp
821: n=Add($n,1)
822: done
823: M bpp${nam}0 c major_bppsp_c Add($offset,0) 600-})dnl
824: __devitem(bpp,bpp*,parallel port devices)dnl
1.1 todd 825: __devitem(xfs,xfs*,XFS filesystem devices)dnl
826: _mcdev(xfs,xfs*,xfs,{-major_xfs_c-},600)dnl
827: __devitem(hil,hil,HIL input devices)dnl
828: __devitem(rmidi,rmidi*,raw midi devices)dnl
829: _mcdev(rmidi,rmidi*,rmidi,{-major_rmidi_c-},666)dnl
830: __devtitle(plat,Platform-specific devices)dnl
831: __devitem(fb,fb*,framebuffer device)dnl
832: __devitem(bktr,bktr*,video capturing)dnl
833: _mcdev(bktr,bktr*,bktr,{-major_bktr_c-},644)dnl
834: __devitem(tuner,tuner*,tuner device)dnl
1.23 todd 835: _mkdev(tuner,tuner*,{-M tuner$U c major_bktr_c Add(Mult($U,2),16) 644-},644)dnl
1.7 todd 836: __devitem(pci,pci,PCI bus device)dnl
837: _mkdev(pci,pci,{-M pci c major_pci_c 0 664-},664)dnl
1.13 todd 838: __devitem(adb,adb,Apple Desktop bus event interface)dnl
839: _mkdev(adb,adb,{-M adb c major_adb_c 0-})dnl
1.15 todd 840: __devitem(pdc,pdc,PDC device)dnl
1.1 todd 841: _mkdev(local,local,{-test -s $T.local && sh $T.local-},666)dnl
842: dnl
843: divert(1)dnl
844: include(etc.MACHINE/MAKEDEV.md)dnl
845: dnl
846: dnl
847: divert(0)dnl
848: #!/bin/sh -
849: #
850: # THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT.
851: # generated from:
852: #
853: show_vers()dnl <-- now that all files are included, show versions
854: #
1.6 todd 855: {-#-} $Open{--}BSD$
1.1 todd 856: dnl
857: divert(2)dnl
858: PATH=/sbin:/usr/sbin:/bin:/usr/bin
859: T=$0
860:
861: # set this to echo for Echo-Only debugging
862: [ "$eo" ] || eo=
863:
864: hex()
865: {
866: case ${--}1 in
1.26 deraadt 867: [0-9]) echo -n {-$-}1;;
868: 10) echo -n a;;
869: 11) echo -n b;;
870: 12) echo -n c;;
871: 13) echo -n d;;
872: 14) echo -n e;;
873: 15) echo -n f;;
1.1 todd 874: esac
875: }
1.26 deraadt 876:
1.1 todd 877: trunc()
878: {
879: # XXX pdksh can't seem to deal with locally scoped variables
880: # in ${foo#$bar} expansions
881: arg1="{-$-}1"
882: arg2="{-$-}2"
883: case {-$-}3 in
884: l) echo ${arg2#$arg1} ;;
885: r|*) echo ${arg1#$arg2} ;;
886: esac
887: }
1.26 deraadt 888:
1.1 todd 889: unt()
890: {
891: # XXX pdksh can't seem to deal with locally scoped variables
892: # in ${foo#$bar} expansions
893: arg="{-$-}1"
894: tmp="${arg#[a-zA-Z]*}"
895: tmp="${tmp%*[a-zA-Z]}"
896: while [ "$tmp" != "$arg" ]
897: do
898: arg=$tmp
899: tmp="${arg#[a-zA-Z]*}"
900: tmp="${tmp%*[a-zA-Z]}"
901: done
902: echo $arg
903: }
904: dnl
1.5 todd 905: dnl dodisk(name,unit,blkmaj,chrmaj,unit,off[,stepping])
906: dnl arg: 1 2 3 4 5 6 7
1.1 todd 907: dnl
1.26 deraadt 908:
1.1 todd 909: dodisk()
910: {
1.27 todd 911: [ "$DEBUG" ] && set -x
1.5 todd 912: n=Add(Mult(${5},${7:-16}),${6}) count=0
1.1 todd 913: RMlist="$RMlist {-$-}1{-$-}2? r{-$-}1{-$-}2?"
1.13 todd 914: [ 0$7 -ne 8 ] && l="i j k l m n o p"
915: for d in a b c d e f g h $l
1.1 todd 916: do
917: M {-$-}1{-$-}2$d b {-$-}3 Add($n,$count) 640
918: M r{-$-}1{-$-}2$d c {-$-}4 Add($n,$count) 640
919: let count=count+1
920: done
921: MKlist="$MKlist;chown root.operator {-$-}1{-$-}2? r{-$-}1{-$-}2?"
922: }
923: dnl
1.5 todd 924: dnl dodisk2(name,unit,blkmaj,chrmaj,unit,off[,stepping])
1.1 todd 925: dnl
926: dnl 1. name - prefix name of the device
927: dnl 2. unit - beginning unit number for block devices
928: dnl 3. blkmaj - block device major number
929: dnl 4. chrmaj - character device major number
930: dnl 5. unit - beginning unit number for character devices
931: dnl 6. off - offset from 0 for all minor numbers (see svnd for an example)
1.5 todd 932: dnl 7. step - optional, defaults to 16, number of partitions per device
1.1 todd 933: dnl
1.26 deraadt 934:
1.1 todd 935: dodisk2()
936: {
1.5 todd 937: n=Add(Mult({-$-}5,${7:-16}),{-$-}6)
1.1 todd 938: M {-$-}1{-$-}2a b {-$-}3 $n 640 operator
939: M r{-$-}1{-$-}2a c {-$-}4 $n 640 operator
940: n=Add($n,2)
941: M {-$-}1{-$-}2c b {-$-}3 $n 640 operator
942: M r{-$-}1{-$-}2c c {-$-}4 $n 640 operator
943: }
944:
945: # M name b/c major minor [mode] [group]
946: RMlist="rm -f"
947: MKlist=":"
1.26 deraadt 948:
1.1 todd 949: mkl() {
950: dnl
951: dnl uncomment if multi mknod happens
952: dnl
953: ifelse(1,0,
954: [ "${mklist[{-$-}1]}" ] && mklist[{-$-}1]="${mklist[{-$-}1]} {-$-}2 {-$-}3 {-$-}4 {-$-}5" || {
955: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
956: modes="$modes {-$-}1"
957: },
958: dnl
959: dnl non multi mknod
960: dnl
1.26 deraadt 961: [ "${mklist[{-$-}1]}" ] && {
962: mklist[{-$-}1]="${mklist[{-$-}1]};mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
963: } || {
964: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
965: modes="$modes {-$-}1"
966: })
1.1 todd 967: }
1.26 deraadt 968:
1.1 todd 969: M() {
970: RMlist="$RMlist {-$-}1"
971: mkl ${5-666} {-$-}1 {-$-}2 {-$-}3 {-$-}4
972: mklist="$mklist {-$-}1"
973: G={-$-}{6:-wheel}
974: [ "{-$-}7" ] && {
975: MKlist="$MKlist;chown {-$-}7.{-$-}G {-$-}1"
976: } || {
977: case $G in
978: wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;;
979: esac
980: [ "${grplist[$g]}" ] && {
981: grplist[$g]="${grplist[$g]} {-$-}1"
982: } || {
983: groups="$groups $g"
984: grplist[$g]="chgrp $G {-$-}1"
985: }
986: }
987: return 0
988: }
989: divert(7)dnl
990: dnl
991: dnl there is no blank line at the end of etc.arch/MAKEDEV.md files, so add one
992: dnl on the following line:
993:
994: show_devs()dnl
995: dnl
996: divert(9)dnl
997: *)
998: echo $i: unknown device
999: ;;
1000: esac
1001: done
1002: }
1003: _recurse "$@"
1004: if [ "$os" = "SunOS" ]; then
1005: eo=transform
1006: transform() {
1007: case $mode in
1008: 600) mask=077;;
1009: 640) mask=027;;
1010: 660) mask=007;;
1011: 644) mask=022;;
1012: 666) mask=0;;
1013: 440) mask=227;;
1014: esac
1015: echo `echo "$@"|sed \
1.26 deraadt 1016: 's/mknod -m \([0-9]*\) /umask '$mask';mknod /;s/-m [0-9]* //g;\
1017: s/operator/5/g;s/root.kmem/root.2/g;s/root\./root:/g'`
1.1 todd 1018: }
1019: fi
1020: list="$RMlist"
1021: for mode in $modes; do
1022: list="$list;${mklist[$mode]}"
1023: done
1024: for group in $groups; do
1025: list="$list;${grplist[$group]}"
1026: done
1027: list="$list;$MKlist"
1028: if [ "$eo" = "echo" -o "$eo" = "transform" ]; then
1029: $eo "$list"
1030: else
1031: echo "$list" | sh
1032: fi
1033: divert(3)dnl
1034: dnl
1.26 deraadt 1035:
1.1 todd 1036: R() {
1.23 todd 1037: [ "$DEBUG" ] && set -x
1.1 todd 1038: for i in "$@"
1039: do
1040: U=`unt $i`
1041: [ "$U" ] || U=0
1042:
1043: case $i in
1044: dnl
![[BACK]](/icons/back.gif){kind=icon}
Return to MAKEDEV.mi CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / src / etc