Annotation of src/etc/MAKEDEV.mi, Revision 1.4
1.1 todd 1: include(MAKEDEV.sub)dnl
2: dnl
1.4 ! todd 3: vers(a,{-$OpenBSD: MAKEDEV.mi,v 1.3 2002/01/04 16:58:41 todd Exp $-})dnl
1.1 todd 4: dnl
5: divert(1)dnl
6: {-#-}
7: {-#-} Copyright (c) 2001 Todd T. Fries <todd@OpenBSD.org>
8: {-#-} All rights reserved.
9: {-#-}
10: {-#-} Redistribution and use in source and binary forms, with or without
11: {-#-} modification, are permitted provided that the following conditions
12: {-#-} are met:
13: {-#-} 1. Redistributions of source code must retain the above copyright
14: {-#-} notice, this list of conditions and the following disclaimer.
15: {-#-} 2. The name of the author may not be used to endorse or promote products
16: {-#-} derived from this software without specific prior written permission.
17: {-#-}
18: {-#-} THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
19: {-#-} INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
20: {-#-} AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21: {-#-} THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
22: {-#-} EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23: {-#-} PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
24: {-#-} OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
25: {-#-} WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
26: {-#-} OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
27: {-#-} ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28: {-#-}
29: dnl
30: dnl Diversions: (upon termination, concatenated output queues)
31: dnl
32: dnl 0 - very top
33: dnl 1 - descriptions of devices
34: dnl 2 - init of script, function definitions, etc
35: dnl 3 - beginning of global recursive R() function
36: dnl 7 - body of MAKEDEV, device creations, etc
37: dnl 9 - end
38: dnl
39: dnl HOW TO ADD A DEVICE:
40: dnl
41: dnl In this file, you must use at least two macros:
42: dnl
43: dnl Use '__devitem(uniqueid,name-pattern,description)' to create an entry
44: dnl in the description at the top of the generated MAKEDEV file:
45: dnl
46: dnl __devitem(sca,sca*,Sugar Generic device)dnl
47: dnl
48: dnl This is ultimately shown as:
49: dnl
50: dnl # sca* Sugar Generic device
51: dnl
52: dnl Use '_mkdev(uniqueid,shell-pattern,{-shell-script-})dnl' to create
53: dnl a shell script fragment used to 'create' the device (be sure to match
54: dnl the uniqueid from above):
55: dnl
56: dnl _mkdev(sca,sca*,{-M sca$U c major_sca_c $U
57: dnl M rsca$U b major_sca_b Add($U,128)-})dnl
58: dnl
59: dnl This is ultimately expanded into:
60: dnl
61: dnl sca*) M sca$U c 24 $U
62: dnl M sca$U b 42 $(($U+128));;
63: dnl
64: dnl In the MAKEDEV.md file, add a '_DEV(uniqueid,charmajor,blockmajor)'
65: dnl entry:
66: dnl
67: dnl _DEV(sca,24,42)
68: dnl
69: dnl Final step is to add an entry to the 'all' entry below. For a short
70: dnl example:
71: dnl
1.4 ! todd 72: dnl _mkdev({-all-},{-all-},{-dnl
1.1 todd 73: dnl _dl({-std-},{-std-},{-sca-},{-sca0 sca1 sca2 sca3-})-})dnl
74: dnl
75: dnl would expand to:
76: dnl
77: dnl all)
78: dnl R std sca0 sca1 sca2 sca3
79: dnl ;;
80: dnl
81: dnl presuming '_DEV(sca..' and '_DEV(std)' were in the MAKEDEV.md file.
82: dnl
83: dnl
84: dnl Everything is 'automatically' added to 'MAKEDEV' based on whether or
85: dnl not the '_DEV()' entry has a corresponding _mkdev() and __devitem()
86: dnl entry in MAKEDEV.sub (this file).
87: dnl
88: dnl Note: be very wary of adding whitespace, carriage returns, or not
89: dnl finishing a macro with ')dnl' .. otherwise, extra blank lines show up
90: dnl in the output.
91: dnl
92: _mkdev(loc,local,{-test -s $T.local && sh $T.local-})dnl
93: dnl
94: __devtitle(make,Device "make" file. Valid arguments)dnl
1.4 ! todd 95: __devitem({-all-},{-all-},
! 96: {-makes all known devices{-,-} including local devices.
1.1 todd 97: {-#-} Tries to make the ``standard'' number of each type.-})dnl
98: dnl
99: dnl 'all' is special. The 'D'evice 'L'ist (or _dl) macro checks to see if
100: dnl a particular devices is in the MAKEDEV.md file, and if so, includes the
101: dnl necessary devices. Otherwise the devices are not included in the 'all'
102: dnl target. Note this keeps line lengths to less than column 70. For the
103: dnl gory details see the definition of '_dl' in MAKEDEV.sub
104: dnl
105: _mkdev(all,{-all-},{-dnl
106: _dl({-std-},{-std-},
107: {-fdesc-},{-fd-},
108: {-sd-},{-sd0 sd1 sd2 sd3 sd4-},
109: {-pty-},{-pty0 pty1-},
110: {-st-},{-st0 st1-},
111: {-ch-},{-ch0-},
112: {-cd-},{-cd0 cd1-},
113: {-mcd-},{-mcd0-},
114: {-vnd-},{-vnd0 vnd1 vnd2 vnd3-},
115: {-ccd-},{-ccd0 ccd1 ccd2 ccd3-},
116: {-wd-},{-wd0 wd1 wd2 wd3-},
117: {-raid-},{-raid0 raid1 raid2 raid3-},
1.4 ! todd 118: {-ofdisk-},{-ofdisk0 ofdisk1 ofdisk2 ofdisk3 ofdisk4-},
! 119: {-xy-},{-xy0 xy1 xy2 xy3 xy4-},
! 120: {-xd-},{-xd0 xd1 xd2 xd3 xd4-},
! 121: {-hd-},{-hd0 hd1 hd2 hd3 hd4-},
! 122: {-rz-},{-rz0 rz1 rz2 rz3 rz4-},
! 123: {-rd-},{-rd0-},
! 124: {-flo-},{-fd0 fd0B fd0C fd0D fd0E fd0F fd0G fd0H-},
! 125: {-flo-},{-fd1 fd1B fd1C fd1D fd1E fd1F fd1G fd1H-},
1.1 todd 126: {-bpf-},{-bpf0 bpf1 bpf2 bpf3 bpf4 bpf5 bpf6 bpf7 bpf8 bpf9-},
127: {-tun-},{-tun0 tun1 tun2 tun3-},
128: {-altq-},{-altq-},
129: {-pf-},{-pf-},
130: {-cry-},{-crypto-},
1.4 ! todd 131: {-apm-},{-apm-},
! 132: {-tth-},{-ttyh0 ttyh1-},
1.1 todd 133: {-ttyB-},{-ttyB0 ttyB1-},
134: {-tty0-},{-tty00 tty01 tty02 tty03-},
135: {-tzs-},{-ttya ttyb ttyc ttyd-},
136: {-tzs-},{-cuaa cuab cuac cuad-},
137: {-lkm-},{-lkm-},
138: {-iop-},{-iop0 iop1-},
139: {-mmcl-},{-mmclock-},dnl
140: {-lpt-},{-lpa0 lpt0-},
141: {-rnd-},{-random-},
142: {-ses-},{-ses0-},
143: {-uk-},{-uk0 uk1-},
144: {-ss-},{-ss0 ss1-},
145: {-ttyc-},{-ttyc0 ttyc1 ttyc2 ttyc3 ttyc4 ttyc5 ttyc6 ttyc7-},
146: {-com-},{-tty00 tty01 tty02 tty03-},
147: {-xfs-},{-xfs0-},
148: {-au-},{-audio0-},
149: {-usbs-},{-usbs-},
150: {-wsmouse-},{-wscons-},
151: {-local-},{-local-})-})dnl
152: __devitem(floppy,floppy,devices to be put on install floppies)dnl
153: __devitem(std,{-std-},standard devices)dnl
154: dnl
155: dnl _std
156: dnl
157: dnl $1: tty
158: dnl $2: memstuff
159: dnl $3: ksyms
160: dnl $4: drum
161: dnl $5: klog
162: dnl
163: define({-_std-},{-dnl
164: std)
165: M console c 0 0 600
166: M tty c $1 0
167: M mem c $2 0 640 kmem
168: M kmem c $2 1 640 kmem
169: M null c $2 2
170: M zero c $2 12
171: M stdin c major_fdesc_c 0
172: M stdout c major_fdesc_c 1
173: M stderr c major_fdesc_c 2
174: M ksyms c $3 0 640 kmem
175: M drum c $4 0 640 kmem
176: M klog c $5 0 600-})dnl
177: dnl
178: __devitem({-usbs-},usbs,make USB devices)dnl
179: _mkdev(usbs,usbs,{-dnl
180: _dl({-usb-},{-usb0 usb1-},
181: {-urio-},{-urio-},
1.2 todd 182: {-uscan-},{-uscanner0-},
1.1 todd 183: {-uhid-},{-uhid0 uhid1 uhid2 uhid3-},
184: {-ulpt-},{-ulpt0 ulpt1-},
185: {-ugen-},{-ugen0 ugen1-},
186: {-utty-},{-utty0 utty1-})-})dnl
187: __devtitle(tap,Tapes)dnl
188: __devitem(wt,{-wt* -},QIC-interface (e.g. not SCSI) 3M cartridge tape)dnl
189: _mkdev(wt,wt*,
190: {-name=wt
191: n=Mult($U,8) m=Add($n,4)
192: M $name$U b major_wt_b $n 640 operator
193: M r$name$U c major_wt_c $n 640 operator
194: M n$name$U b major_wt_b $m 640 operator
195: M nr$name$U c major_wt_c $m 640 operator-})dnl
196: __devitem(tz,tz*,{-SCSI tapes{-,-} DEC TK50 cartridge tape-})dnl
197: __devitem(st,{-st*-},SCSI tapes)dnl
198: _mkdev(st,st*,{-n=Mult($U,16)
199: for pre in " " n e en
200: do
201: M ${pre}st$U b major_st_b $n 660 operator
202: M ${pre}rst$U c major_st_c $n 660 operator
203: n=Add($n,1)
204: done-})dnl
205: _mkdev(st_hp300,ct*|mt*|st*,
206: {-case $i in
207: ct*) name=ct blk=major_ct_b chr=major_ct_c;;
208: mt*) name=mt blk=major_mt_b chr=major_mt_c;;
209: st*) name=st blk=major_st_hp300_b chr=major_st_hp300_c;;
210: esac
211: case $U in
212: [0-7])
213: four=Add($U,4) eight=Add($U,8)
214: twelve=Add($U,12) twenty=Add($U,20)
215: M r$name$U c $chr $U 660 operator
216: M r$name$four c $chr $four 660 operator
217: M r$name$eight c $chr $eight 660 operator
218: M r$name$twelve c $chr $twelve 660 operator
219: MKlist="$MKlist;ln r$name$four nr$name$U";: sanity w/pdp11 v7
220: MKlist="$MKlist;ln r$name$twelve nr$name$eight";: ditto
221: RMlist="$RMlist nr$name$U nr$name$eight"
222: ;;
223: *)
224: echo bad unit for tape in: $1
225: ;;
226: esac-})dnl
227: __devitem(st_hp300,st*,Exabyte tape)dnl
228: __devitem(ct,ct*,HP300 HP-IB cartridge tape)dnl
229: __devitem(mt,mt*,(Magnetic) 9-track reel tape)dnl
230: __devtitle(dis,Disks)dnl
231: __devitem(rz,rz*,SCSI disks)dnl
232: __devitem(sd,{-sd*-},SCSI disks{-,-} includes flopticals)dnl
233: __devitem(ofdisk,ofdisk*,OpenFirmware disks)dnl
234: __devitem(hd,{-hd*-},HP300 HP-IB disks)dnl
235: __devitem(cd,{-cd*-},SCSI cdrom drives)dnl
236: __devitem(acd,acd*,ATAPI cdrom drives)dnl
237: _mkdev(cd,cd*,{-dodisk2 cd $U major_cd_b major_cd_c $U 0{--}dnl
238: -})dnl
239: __devitem(mcd,mcd*,Mitsumi cdrom drives)dnl
240: _mkdev(mcd,mcd*,{-dodisk2 mcd $U major_mcd_b major_mcd_c $U 0-})dnl
241: __devitem(ch,{-ch*-},SCSI media changer)dnl
242: _mcdev(ch,ch*,ch,{-major_ch_c-},660,operator)dnl
243: __devitem(uk,uk*,SCSI Unknown device)dnl
244: _mcdev(uk,uk*,uk,{-major_uk_c-},640,operator)dnl
245: __devitem(ss,ss*,SCSI scanners)dnl
246: _mkdev(ss,ss*,{-M ss$U c major_ss_c $U 440 operator
247: RMlist="$RMlist scan$U"
248: MKlist="$MKlist;umask 77;ln -s ss$U scan$U"-})dnl
249: __devitem(ses,ses*,SES/SAF-TE SCSI devices)dnl
250: _mkdev(ses,ses*,{-M ses$U c major_ses_c $U 640 operator-})dnl
251: __devitem(ramd,ramdisk,makes all devices for a ramdisk kernel)dnl arc
252: __devitem(rd,{-rd*-},"ramdisk" pseudo-disks)dnl
253: _mkdev(rd,rd*,{-dodisk2 rd $U major_rd_b major_rd_c $U 0-})dnl
254: __devitem(xd,xd*,Xylogic 753/7053 disks)dnl
255: __devitem(xy,xy*,{- Xylogic 450/451 disks-})dnl
256: __devitem(flo,{-fd*-},{-Floppy disk drives (3 1/2"{-,-} 5 1/4")-})dnl
257: _mkdev(flo,fd*,
258: {-typnam=$U${i#fd[01]*}
259: case $typnam in
260: 0|1) typnum=0;; # no type specified, assume A
261: *A) typnam=0; typnum=0;;
262: *B) typnum=1;;
263: *C) typnum=2;;
264: *D) typnum=3;;
265: *E) typnum=4;;
266: *F) typnum=5;;
267: *G) typnum=6;;
268: *H) typnum=7;;
269: *) echo bad type $typnam for $i; exit 1;;
270: esac
271: case $U in
272: 0|1) blk=major_flo_b; chr=major_flo_c;;
273: *) echo bad unit $U for $i; exit 1;;
274: esac
275: nam=fd${typnam}
276: n=Add(Mult($U,128),Mult($typnum,16))
277: M ${nam}a b $blk $n 640 operator
278: M ${nam}b b $blk Add($n,1) 640 operator
279: M ${nam}c b $blk Add($n,2) 640 operator
280: M r${nam}a c $chr $n 640 operator
281: M r${nam}b c $chr Add($n,1) 640 operator
282: M r${nam}c c $chr Add($n,2) 640 operator-},664)dnl
283: __devitem(aflo,floppy,devices needed for install floppies)dnl
284: _mkdev(aflo,fd*,{-case $U in 0|1|2|3)
285: M fd${U}a b major_aflo_b Mult($U,16) 640 operator
286: M fd${U}b b major_aflo_b Add(Mult($U,16),1) 640 operator
287: M rfd${U}a c major_aflo_c Mult($U,16) 640 operator
288: M rfd${U}b c major_aflo_c Add(Mult($U,16),1) 640 operator;;
289: *) echo bad unit for floppy disk in: $i;;
290: esac-})dnl
291: __devitem(iop,iop*,I2O controller device)dnl
292: _mcdev(iop,iop*,iop,{-major_iop_c-},660)dnl
293: __devitem(wdt,wdt0,watchdog timer)dnl
294: _mcdev(wdt,wdt0,wdt,{-major_wdt_c-},440,operator)dnl
295: __devitem(local,local,configuration specific devices)dnl
296: __devitem(wd,{-wd*-},{-"winchester" disk drives (ST506,IDE,ESDI,RLL,...)-})dnl
297: __devitem(ccd,ccd*,concatenated disk devices)dnl
298: __devitem(raid,raid*,RAIDframe disk devices)dnl
299: __devitem(vnd,vnd*,"file" pseudo-disks)dnl
300: _mkdev(vnd,vnd*,{-dodisk vnd $U major_vnd_b major_vnd_c $U 0
301: dodisk svnd $U major_vnd_b major_vnd_c $U 128-})dnl
302: dnl
303: dnl For normal disk devices, add a disk_q entry; anything else define like
304: dnl the rest (such as vnd above).
305: dnl
306: disk_q({-xy-})dnl
307: disk_q({-xd-})dnl
308: disk_q({-hd-})dnl
309: disk_q({-ofdisk-})dnl
310: disk_q({-rz-})dnl
311: disk_q({-wd-})dnl
312: disk_q({-raid-})dnl
313: disk_q({-ccd-})dnl
314: disk_q({-sd-})dnl
315: dnl
316: __devitem(loc,local,configuration specific devices)dnl
317: _mkdev(loc,local,{-test -s $T.local && sh $T.local-})dnl
318: _mkdev({-disks-},{-undefine({-C_ase-})show_disks()undefine({-C_ase-})-},
319: {-case $i in
320: show_disks2()dnl
321: esac
322: dodisk $n $U $b $c $U 0-})dnl
323: __mkdev({-disks-}){--}dnl
324: dnl
325: __devtitle(cons,Console ports)dnl
326: __devitem(ttyv0,ttyv0,pccons or pcvt screen 0)dnl
327: __devitem(ttyv,ttyv*,pcvt)dnl
328: __devitem(ttye,ttye*,ite bitmapped consoles)dnl
329: __devitem(wscons,ttyC0,wscons screen 0)dnl
330: _mkdev({-wscons-},{-wscons-},{-dnl
331: _dl(dnl
332: {-wscons-},{-ttyCcfg-},
1.3 todd 333: {-wsdisp-},{-ttyC0 ttyC1 ttyC2 ttyC3 ttyC4 ttyC5 ttyC6 ttyC7 ttyC8 ttyC9-},
334: {-wsdisp-},{-ttyCa ttyCb-},
1.1 todd 335: {-wsmux-},{-wsmux-},
336: {-wskbd-},{-wskbd0 wskbd1 wskbd2 wskbd3-},
337: {-wsmouse-},{-wsmouse0 wsmouse1 wsmouse2 wsmouse3-})-})dnl
1.3 todd 338: __devitem(wsdisp,ttyC*,wscons virtual consoles)dnl
339: _mkdev({-wsdisp-},ttyC*,{-U=${i##ttyC}
340: case $U in
341: [0-9a-f]) M ttyC$U c major_wsdisp_c {-$(( 16#$U ))-} 600 ;;
342: cfg) M ttyCcfg c major_wsdisp_c 255 ;;
343: *) echo bad unit $U for $i; exit 1;;
344: esac
345: -})dnl
1.1 todd 346: __devitem(wskbd,wskbd*,wscons keyboards)dnl
347: _mkdev(wskbd,wskbd*,{-M wskbd$U c major_wskbd_c $U 600-})dnl
348: __devitem(wsmux,wsmux,wscons keyboard/mouse mux devices)dnl
349: _mkdev(wsmux,wsmux|wsmouse|wskbd,{-M wsmouse c major_wsmux_c 0 600
350: M wskbd c major_wsmux_c 1 600-})dnl
351: __devitem(pcons,console,PROM console)dnl
352: __devtitle(point,Pointing devices)dnl
353: __devitem(wsmouse,wsmouse*,wscons mice)dnl
354: _mkdev(wsmouse,wsmouse*,{-M wsmouse$U c major_wsmouse_c $U 600-})dnl
355: __devitem(quad,quadmouse,"quadrature mouse")dnl
356: __devtitle(pty,Pseudo terminals)dnl
357: __devitem(tty,tty*,set of 16 slave psuedo terminals)dnl
358: __devitem(pty,pty*,set of 16 master pseudo terminals)dnl
359: _mkdev(pty,pty*,{-case $U in
360: 0) off=0 name=p;;
361: 1) off=16 name=q;;
362: 2) off=32 name=r;;
363: 3) off=48 name=s;;
364: # Note that telnetd, rlogind, and xterm (at least) only look at p-s.
365: 4) off=64 name=t;;
366: 5) off=80 name=u;;
367: 6) off=96 name=v;;
368: 7) off=112 name=w;;
369: 8) off=128 name=x;;
370: 9) off=144 name=y;;
371: 10) off=160 name=z;;
372: 11) off=176 name=P;;
373: 12) off=192 name=Q;;
374: 13) off=206 name=R;;
375: 14) off=224 name=S;;
376: 15) off=240 name=T;;
377: *) echo bad unit for pty in: $i; continue;;
378: esac
379: n=0
380: while [ $n -lt 16 ]
381: do
382: nam=$name$(hex $n)
383: M tty$nam c major_tty_c Add($off,$n)
384: M pty$nam c major_pty_c Add($off,$n)
385: n=Add($n,1)
386: done-})dnl
387: __devitem(dc,dc*,{-4 channel serial interface (keyboard{-,-} mouse{-,-}modem{-,-} printer)-})dnl
388: __devtitle(prn,Printers)dnl
389: __devitem(par,par*,motherboard parallel port)dnl
390: __devitem(lpt,lpt*,IEEE 1284 centronics printer)dnl
391: _mkdev(lpt,lpt*|lpa*,
392: {-case $i in
393: lpt*) n=lpt f=0;;
394: lpa*) n=lpa f=128;;
395: esac
396: M $n$U c major_lpt_c Add($U,$f) 600-})dnl
397: __devitem(lpa,lpa*,interruptless lp)dnl
398: __devitem(ppi,ppi*,HP-IB plotters)dnl
399: __devtitle({-usb-},USB devices)dnl
400: __devitem({-usb-},usb*,Bus control devices used by usbd for attach/detach)dnl
401: _mkdev({-usb-},usb*,{-[ "$i" = "usb" ] && u= || u=$U
402: M usb$u c major_usb_c $U 660-})dnl
403: __devitem(uhid,uhid*,Generic HID devices)dnl
404: _mcdev({-uhid-},uhid*,{-uhid-},{-major_uhid_c-},660)dnl
405: __devitem(ulpt,ulpt*,Printer devices)dnl
406: _mcdev({-ulpt-},ulpt*,{-ulpt-},{-major_ulpt_c-},660)dnl
407: __devitem(utty,utty*,Serial ports)dnl
408: _mcdev({-utty-},utty*,{-utty-},{-major_utty_c-},660)dnl
409: __devitem(urio,urio*,Diamond Multimedia Rio 500)dnl
410: _mcdev({-urio-},urio*,{-urio-},{-major_urio_c-},660)dnl
1.2 todd 411: __devitem(uscan,uscanner*,Scanners)dnl
412: _mcdev({-uscan-},uscanner*,{-uscanner-},{-major_uscan_c-},660)dnl
1.1 todd 413: __devitem(ugen,ugen*,Generic device)dnl
414: _mkdev(ugen,ugen*,{-n=Mult($U,16)
415: for j in 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
416: do
417: M ugen$U.$j c major_ugen_c Add($n,$j) 660
418: done-})dnl
419: __devtitle(cpu,Cpus)dnl
420: __devitem(cpu,cpu*,cpus)dnl
421: __devtitle(call,Call units)dnl
422: __devtitle(term,Terminal ports)dnl
423: __devtitle(termp,Terminal multiplexers)dnl
424: __devitem(dca,dca*,HP200/300 single port serial interface)dnl
425: __devitem(dcm,dcm*,HP200/300 4 port serial mux interface)dnl
426: __devitem(apci,apci*,HP400 4 port serial mux interface)dnl
427: __devitem({-com-},{-tty0*-},NS16x50 serial ports)dnl
428: _mkdev(com,{-tty0*-},{-M tty$U c major_com_c $U 660 dialer uucp
429: M cua$U c major_com_c Add($U,128) 660 dialer uucp-})dnl
430: __devitem(ttyc,ttyc*,Cyclades serial ports)dnl
431: __devitem(tzs,tty[a-z]*,Zilog 8530 Serial Port)dnl
432: _mkdev(tzs,{-tty[a-z]-},{-u=${i#tty*}
433: case $u in
434: a) n=0 ;;
435: b) n=1 ;;
436: c) n=4 ;;
437: d) n=5 ;;
438: *) echo unknown tty device $i ;;
439: esac
440: M tty$u c major_tzs_c $n 660 dialer uucp-})dnl
441: __devitem(tth,ttyh*,Sab82532 serial devices)dnl
442: _mkdev(tth,ttyh*,{-M ttyh$U c major_tth_c $U 660 dialer uucp-})dnl
443: __devitem(czs,cua[a-z]*,Zilog 8530 Serial Port)dnl
444: _mkdev(czs,cua[a-z],{-u=${i#cua*}
445: case $u in
446: a) n=0 ;;
447: b) n=1 ;;
448: c) n=4 ;;
449: d) n=5 ;;
450: *) echo unknown cua device $i ;;
451: esac
452: M cua$u c major_czs_c Add($n,128) 660 dialer uucp-})dnl
453: __devitem(arm_tty,tty*,{-alias for PC COM ports{-,-} this is what the system really wants-})dnl
454: __devitem(tty0,tty00,standard serial port)dnl
455: __devitem(ttyA,ttyA*,mfc serial ports)dnl
456: __devitem(attyB,ttyB*,ISA COM ports)dnl amiga
457: __devitem(ttyz,tty[a-d],onboard zs serial ports)dnl
458: __devitem(cuaz,cua[a-d],onboard zs serial ports)dnl
459: __devitem(ttyB,ttyB?,DEC 3000 ZS8530 ("scc") serial ports)dnl
460: __devitem(scc,scc*,82530 serial interface)dnl
461: __devitem(arc_ttyC,ttyC0,pccons)dnl
462: __devitem(i386_ttyC,ttyC*,pcvt)dnl
463: __devitem(ttyC,ttyC?,{-AlphaStation NS16550 ("com serial ports")-})dnl
464: __devitem(ttyE,ttyE?,Workstation console (framebuffer & keyboard) tty emulators)dnl
465: __devitem(ser02,ser02,{-serial2 port (channel A on 8530)-})dnl
466: __devitem(mdm02,mdm02,{-modem2 port (channel B on 8530)-})dnl
467: __devtitle(spec,Special purpose devices)dnl
468: __devitem(apm,apm ,power management device)dnl
469: _mkdev(apm,apm*,{-M apm c major_apm_c 0 644
470: M apmctl c major_apm_c 8 644-})dnl
471: __devitem(pcmcia,pcmcia*,PCMCIA card drivers)dnl
472: __devitem(pctr,pctr*,PC Performance Tuning Register access device)dnl
473: _mkdev(pctr,pctr,{-M pctr c major_pctr_c 0 644-})dnl
474: __devitem(au,audio*,audio device)dnl
475: _mkdev(au,audio*,{-M sound$U c major_au_c $U
476: M mixer$U c major_au_c Add($U,16)
477: M audio$U c major_au_c Add($U,128)
478: M audioctl$U c major_au_c Add($U,192)
479: MKlist="$MKlist;[ -e audio ] || ln -s audio$U audio"
480: MKlist="$MKlist;[ -e mixer ] || ln -s mixer$U mixer"
481: MKlist="$MKlist;[ -e sound ] || ln -s sound$U sound"
482: MKlist="$MKlist;[ -e audioctl ] || ln -s audioctl$U audioctl"-})dnl
483: __devitem(music,music*,midi devices)dnl
484: _mkdev(music,music*,{-M music$U c major_music_c $U
485: M sequencer$U c major_music_c Add($U,128)
486: MKlist="$MKlist;[ -e music ] || ln -s music$U music"
487: MKlist="$MKlist;[ -e sequencer ] || ln -s sequencer$U sequencer"-})dnl
488: __devitem(fdesc,fd,makes fd/* for the fdescfs)dnl
489: _mkdev(fdesc,fd,{-RMlist="mkdir -p fd;$RMlist" n=0
490: while [ $n -lt 64 ];do M fd/$n c major_fdesc_c $n;n=Add($n,1);done
491: MKlist="$MKlist;chmod 555 fd"-})dnl
492: __devtitle(graph,Graphics devices)dnl
493: __devitem(grf,grf*,{-custom chip (grf0){-,-} Retina Z2/Z3 (grf1/grf2){-,-}
494: {-#-} Cirrus boards (grf3){-,-} A2410 (grf4) video or
495: {-#-} CyberVision 64 (grf5)-})dnl
496: __devitem(grf_amiga,grf*,{-Motherboard bitmapped video.-})dnl
497: __devitem(grf_hp300,grf*,raw interface to HP300 graphics devices)dnl
498: __devitem(ite,ite*,terminal emulator interface to HP300 graphics devices)dnl
499: __devitem({-hil-},{-hil-},HP300 HIL input devices)dnl
500: __devitem(oppr,openprom)dnl
501: _cdev(oppr,openprom,70,0)dnl
502: __devitem(btw,bwtwo*)dnl
503: _mcdev(btw,bwtwo*,bwtwo,{-major_btw_c-},666)dnl
504: __devitem(ctw,cgtwo*)dnl
505: _mcdev(ctw,cgtwo*,cgtwo,{-major_ctw_c-},666)dnl
506: __devitem(ctr,cgthree*)dnl
507: _mcdev(ctr,cgthree*,cgthree,{-major_ctr_c-},666)dnl
508: __devitem(cfr,cgfour*)dnl
509: _mcdev(cfr,cgfour*,cgfour,{-major_cfr_c-},666)dnl
510: __devitem(csx,cgsix*)dnl
511: _mcdev(csx,cgsix*,cgsix,{-major_csx_c-},666)dnl
512: __devitem(ceg,cgeight*)dnl
513: _mcdev(ceg,cgeight*,cgeight,{-major_ceg_c-},666)dnl
514: __devitem(cfo,cgfourteen*)dnl
515: _mcdev(cfo,cgfourteen*,cgfourteen,{-major_cfo_c-})dnl
516: __devitem(tcx,tcx*)dnl
517: _mcdev(tcx,tcx*,tcx,{-major_tcx_c-})dnl
518: __devitem(cry,crypto,hardware crypto access driver)dnl
519: _mkdev(cry,crypto,{-M crypto c major_cry_c-} 0)dnl
520: __devitem(pf,pf*,Packet Filter)dnl
521: _mkdev(pf,{-pf*-},{-M pf c major_pf_c 0 600-})dnl
522: __devitem(bpf,bpf*,Berkeley Packet Filter)dnl
523: _mkdev(bpf,{-bpf*-},{-M bpf$U c major_bpf_c $U 600-},600)dnl
524: _mkdev(tun,{-tun*-},{-M tun$U c major_tun_c $U 600-},600)dnl
525: __devitem(altq,altq/,ALTQ control interface)dnl
526: _mkdev(altq,altq,{-RMlist="mkdir -p altq;$RMlist"
527: for d in altq cbq wfq afm fifoq red rio localq hfsc cdnr blue priq; do
528: M altq/$d c major_altq_c $U 644
529: U=Add($U,1)
530: done-})dnl
531: __devitem(speak,speaker,pc speaker)dnl
532: __devitem(kbd,kbd,keyboard (provides events, for X11))dnl
533: _cdev(kbd,kbd,{-major_kbd_c-},0,600)dnl
534: __devitem(kbd_atari,kbd,Atari keyboard)dnl
535: __devitem(akbd,kbd,Amiga keyboard)dnl
536: __devitem(rkbd,kbd,raw keyboard)dnl
537: __devitem(kbdctl,kbdctl,keyboard control)dnl
538: __devitem(beep,beep,riscpc speaker)dnl
539: __devitem(iic,iic*,IIC bus device)dnl
540: __devitem(rtc,rtc*,RTC device)dnl
541: __devitem(view,view*,generic interface to graphic displays)dnl
542: __devitem(aconf,aconf,{-autoconfig information (not yet)-})dnl
543: __devitem(mouse-,mouse-*,"mouse link")dnl
544: __devitem(mouse,mouse,mouse (provides events, for X11))dnl
545: __devitem(mouse_atari,mouse*,Atari mice)dnl
546: _cdev(mouse,mouse,30,0,666)dnl
547: __devitem(amouse,mouse*,Amiga mice)dnl
548: __devitem(lkm,lkm,loadable kernel modules interface)dnl
549: _cdev(lkm,lkm,{-major_lkm_c-},0,640,kmem)dnl
550: __devitem(mmcl,mmclock,memory mapped clock)dnl
551: __devitem(tun,tun*,network tunnel driver)dnl
552: __devitem(rnd,*random,inkernel random data source)dnl
553: _mkdev(rnd,*random,{-n=0
554: for pre in " " s u p a
555: do
556: M ${pre}random c major_rnd_c $n 644
557: n=Add($n,1)
558: done-},644)dnl
559: __devitem(joy,joy*,joystick driver)dnl
560: _mcdev(joy,joy*,joy,{-major_joy_c-},600)dnl
561: __devitem(mag,magma*,magma card (makes 16 tty and 2 bpp))dnl
562: __devitem(xfs,xfs*,XFS filesystem devices)dnl
563: _mcdev(xfs,xfs*,xfs,{-major_xfs_c-},600)dnl
564: __devitem(hil,hil,HIL input devices)dnl
565: __devitem(rmidi,rmidi*,raw midi devices)dnl
566: _mcdev(rmidi,rmidi*,rmidi,{-major_rmidi_c-},666)dnl
567: __devtitle(plat,Platform-specific devices)dnl
568: __devitem(fb,fb*,framebuffer device)dnl
569: __devitem(bktr,bktr*,video capturing)dnl
570: _mcdev(bktr,bktr*,bktr,{-major_bktr_c-},644)dnl
571: __devitem(tuner,tuner*,tuner device)dnl
572: _mkdev(tuner,tuner*,{-M tuner$U c major_tuner_c Add(Mult($U,2),16) 644-},644)dnl
573: _mkdev(local,local,{-test -s $T.local && sh $T.local-},666)dnl
574: dnl
575: divert(1)dnl
576: include(etc.MACHINE/MAKEDEV.md)dnl
577: dnl
578: dnl define DISK_STEPPING in the above file if other than 16
579: dnl
580: ifdef({-DISK_STEPPING-},,{-define({-DISK_STEPPING-},{-16-})-})dnl
581: dnl
582: divert(0)dnl
583: #!/bin/sh -
584: #
585: # THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT.
586: # generated from:
587: #
588: show_vers()dnl <-- now that all files are included, show versions
589: #
1.4 ! todd 590: # $Open{--}BSD$
1.1 todd 591: dnl
592: divert(2)dnl
593: PATH=/sbin:/usr/sbin:/bin:/usr/bin
594: T=$0
595:
596: # set this to echo for Echo-Only debugging
597: [ "$eo" ] || eo=
598:
599: hex()
600: {
601: case ${--}1 in
602: [0-9]) echo -n {-$-}1;;
603: 10) echo -n a;;
604: 11) echo -n b;;
605: 12) echo -n c;;
606: 13) echo -n d;;
607: 14) echo -n e;;
608: 15) echo -n f;;
609: esac
610: }
611: trunc()
612: {
613: # XXX pdksh can't seem to deal with locally scoped variables
614: # in ${foo#$bar} expansions
615: arg1="{-$-}1"
616: arg2="{-$-}2"
617: case {-$-}3 in
618: l) echo ${arg2#$arg1} ;;
619: r|*) echo ${arg1#$arg2} ;;
620: esac
621: }
622: unt()
623: {
624: # XXX pdksh can't seem to deal with locally scoped variables
625: # in ${foo#$bar} expansions
626: arg="{-$-}1"
627: tmp="${arg#[a-zA-Z]*}"
628: tmp="${tmp%*[a-zA-Z]}"
629: while [ "$tmp" != "$arg" ]
630: do
631: arg=$tmp
632: tmp="${arg#[a-zA-Z]*}"
633: tmp="${tmp%*[a-zA-Z]}"
634: done
635: echo $arg
636: }
637: dnl
638: dnl dodisk(name,unit,blkmaj,chrmaj,unit,off)
639: dnl
640: dodisk()
641: {
642: n=Add(Mult(${5},DISK_STEPPING),${6}) count=0
643: RMlist="$RMlist {-$-}1{-$-}2? r{-$-}1{-$-}2?"
644: for d in a b c d e f g h i j k l m n o p
645: do
646: M {-$-}1{-$-}2$d b {-$-}3 Add($n,$count) 640
647: M r{-$-}1{-$-}2$d c {-$-}4 Add($n,$count) 640
648: let count=count+1
649: done
650: MKlist="$MKlist;chown root.operator {-$-}1{-$-}2? r{-$-}1{-$-}2?"
651: }
652: dnl
653: dnl dodisk2(name,unit,blkmaj,chrmaj,unit,off)
654: dnl
655: dnl 1. name - prefix name of the device
656: dnl 2. unit - beginning unit number for block devices
657: dnl 3. blkmaj - block device major number
658: dnl 4. chrmaj - character device major number
659: dnl 5. unit - beginning unit number for character devices
660: dnl 6. off - offset from 0 for all minor numbers (see svnd for an example)
661: dnl
662: dodisk2()
663: {
664: n=Add(Mult({-$-}5,DISK_STEPPING),{-$-}6)
665: M {-$-}1{-$-}2a b {-$-}3 $n 640 operator
666: M r{-$-}1{-$-}2a c {-$-}4 $n 640 operator
667: n=Add($n,2)
668: M {-$-}1{-$-}2c b {-$-}3 $n 640 operator
669: M r{-$-}1{-$-}2c c {-$-}4 $n 640 operator
670: }
671:
672: # M name b/c major minor [mode] [group]
673: RMlist="rm -f"
674: MKlist=":"
675: mkl() {
676: dnl
677: dnl uncomment if multi mknod happens
678: dnl
679: ifelse(1,0,
680: [ "${mklist[{-$-}1]}" ] && mklist[{-$-}1]="${mklist[{-$-}1]} {-$-}2 {-$-}3 {-$-}4 {-$-}5" || {
681: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
682: modes="$modes {-$-}1"
683: },
684: dnl
685: dnl non multi mknod
686: dnl
687: [ "${mklist[{-$-}1]}" ] && {
688: mklist[{-$-}1]="${mklist[{-$-}1]};mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
689: } || {
690: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
691: modes="$modes {-$-}1"
692: })
693: }
694: M() {
695: RMlist="$RMlist {-$-}1"
696: mkl ${5-666} {-$-}1 {-$-}2 {-$-}3 {-$-}4
697: mklist="$mklist {-$-}1"
698: G={-$-}{6:-wheel}
699: [ "{-$-}7" ] && {
700: MKlist="$MKlist;chown {-$-}7.{-$-}G {-$-}1"
701: } || {
702: case $G in
703: wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;;
704: esac
705: [ "${grplist[$g]}" ] && {
706: grplist[$g]="${grplist[$g]} {-$-}1"
707: } || {
708: groups="$groups $g"
709: grplist[$g]="chgrp $G {-$-}1"
710: }
711: }
712: return 0
713: }
714: divert(7)dnl
715: dnl
716: dnl there is no blank line at the end of etc.arch/MAKEDEV.md files, so add one
717: dnl on the following line:
718:
719: show_devs()dnl
720: dnl
721: divert(9)dnl
722: *)
723: echo $i: unknown device
724: ;;
725: esac
726: done
727: }
728: _recurse "$@"
729: if [ "$os" = "SunOS" ]; then
730: eo=transform
731: transform() {
732: case $mode in
733: 600) mask=077;;
734: 640) mask=027;;
735: 660) mask=007;;
736: 644) mask=022;;
737: 666) mask=0;;
738: 440) mask=227;;
739: esac
740: echo `echo "$@"|sed \
741: 's/mknod -m \([0-9]*\) /umask '$mask';mknod /;s/-m [0-9]* //g;\
742: s/operator/5/g;s/root.kmem/root.2/g;s/root\./root:/g'`
743: }
744: fi
745: list="$RMlist"
746: for mode in $modes; do
747: list="$list;${mklist[$mode]}"
748: done
749: for group in $groups; do
750: list="$list;${grplist[$group]}"
751: done
752: list="$list;$MKlist"
753: if [ "$eo" = "echo" -o "$eo" = "transform" ]; then
754: $eo "$list"
755: else
756: echo "$list" | sh
757: fi
758: divert(3)dnl
759: dnl
760: R() {
761: for i in "$@"
762: do
763: U=`unt $i`
764: [ "$U" ] || U=0
765:
766: case $i in
767: dnl