Annotation of src/etc/MAKEDEV.mi, Revision 1.52
1.1 todd 1: include(MAKEDEV.sub)dnl
2: dnl
1.52 ! todd 3: vers(a, {-$OpenBSD: MAKEDEV.mi,v 1.51 2002/08/29 23:43:16 todd Exp $-})dnl
1.1 todd 4: dnl
5: divert(1)dnl
6: {-#-}
1.33 deraadt 7: {-#-} Copyright (c) 2001,2002 Todd T. Fries <todd@OpenBSD.org>
1.1 todd 8: {-#-} All rights reserved.
9: {-#-}
10: {-#-} Redistribution and use in source and binary forms, with or without
11: {-#-} modification, are permitted provided that the following conditions
12: {-#-} are met:
13: {-#-} 1. Redistributions of source code must retain the above copyright
14: {-#-} notice, this list of conditions and the following disclaimer.
15: {-#-} 2. The name of the author may not be used to endorse or promote products
16: {-#-} derived from this software without specific prior written permission.
17: {-#-}
18: {-#-} THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
19: {-#-} INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
20: {-#-} AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21: {-#-} THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
22: {-#-} EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23: {-#-} PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
24: {-#-} OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
25: {-#-} WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
26: {-#-} OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
27: {-#-} ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28: {-#-}
29: dnl
30: dnl Diversions: (upon termination, concatenated output queues)
31: dnl
32: dnl 0 - very top
33: dnl 1 - descriptions of devices
34: dnl 2 - init of script, function definitions, etc
35: dnl 3 - beginning of global recursive R() function
36: dnl 7 - body of MAKEDEV, device creations, etc
37: dnl 9 - end
38: dnl
39: dnl HOW TO ADD A DEVICE:
40: dnl
41: dnl In this file, you must use at least two macros:
42: dnl
1.29 todd 43: dnl Use '__devitem(uniqueid, name-pattern, description)' to create an entry
1.1 todd 44: dnl in the description at the top of the generated MAKEDEV file:
45: dnl
1.29 todd 46: dnl __devitem(sca, sca*, Sugar Generic device)dnl
1.41 todd 47: dnl __devitem(cry, crypto, hardware crypto access driver)dnl
1.1 todd 48: dnl
49: dnl This is ultimately shown as:
50: dnl
51: dnl # sca* Sugar Generic device
1.41 todd 52: dnl # crypto hardware crypto access driver
1.1 todd 53: dnl
1.29 todd 54: dnl Use '_mkdev(uniqueid, shell-pattern, {-shell-script-})dnl' to create
1.1 todd 55: dnl a shell script fragment used to 'create' the device (be sure to match
56: dnl the uniqueid from above):
57: dnl
1.29 todd 58: dnl _mkdev(sca, sca*, {-M sca$U c major_sca_c $U
59: dnl M rsca$U b major_sca_b Add($U, 128)-})dnl
1.41 todd 60: dnl _mkdev(cry, crypto, {-M crypto c major_cry_c 0-})dnl
1.1 todd 61: dnl
62: dnl This is ultimately expanded into:
63: dnl
1.41 todd 64: dnl sca*)
65: dnl M sca$U c 24 $U
66: dnl M sca$U b 42 $(($U+128))
67: dnl ;;
68: dnl
69: dnl crypto)
70: dnl M crypto c 47 0
71: dnl ;;
1.1 todd 72: dnl
1.29 todd 73: dnl In the MAKEDEV.md file, add a '_DEV(uniqueid, charmajor, blockmajor)'
1.1 todd 74: dnl entry:
75: dnl
1.29 todd 76: dnl _DEV(sca, 24, 42)
1.41 todd 77: dnl _DEV(cry, 47)
1.1 todd 78: dnl
1.41 todd 79: dnl Final step is to use the 'target/twrget' macros to have the 'all)' target
80: dnl generate one or more device(s). Usage of 'target/twrget' is:
81: dnl target(target_name, device_name [, append_string ] .. )
82: dnl twrget(target_name, uniqueid, device_name, [, append_string ] .. )
1.1 todd 83: dnl
1.41 todd 84: dnl target_name a unique name that later is used as an argument to
85: dnl 'show_target()' (which expands all devices for a
86: dnl given 'target_name').
87: dnl uniqueid same as 'uniqueid' above
88: dnl device_name string representing the device to be mknod'ed
89: dnl append_string for each append_string, `device_name' is prepended
90: dnl
91: dnl Note: 'target(a,b,c)' is equivalent to 'twrget(a,b,b,c)'
92: dnl
93: dnl
94: dnl For a short example:
95: dnl
96: dnl target(all, std)dnl
97: dnl target(all, sca, 0, 1, 2, 3)dnl
98: dnl twrget(all, cry, crypto)dnl
1.1 todd 99: dnl
100: dnl would expand to:
101: dnl
102: dnl all)
1.41 todd 103: dnl R std sca0 sca1 sca2 sca3 crypto
1.1 todd 104: dnl ;;
105: dnl
1.41 todd 106: dnl presuming '_DEV(sca, ?, ?)' and '_DEV(std)' were in the MAKEDEV.md file.
1.1 todd 107: dnl
108: dnl
109: dnl Everything is 'automatically' added to 'MAKEDEV' based on whether or
110: dnl not the '_DEV()' entry has a corresponding _mkdev() and __devitem()
1.41 todd 111: dnl entry in MAKEDEV.mi (this file).
1.1 todd 112: dnl
113: dnl Note: be very wary of adding whitespace, carriage returns, or not
114: dnl finishing a macro with ')dnl' .. otherwise, extra blank lines show up
115: dnl in the output.
116: dnl
1.31 todd 117: dnl TODO:
118: dnl
119: dnl make a 'disktgt' macro that automatically does:
1.34 deraadt 120: dnl disktgt(rd, {-rd-})
1.31 todd 121: dnl
122: dnl target(all,rd,0)
123: dnl target(ramd,rd,0)
124: dnl disk_q(rd)
1.34 deraadt 125: dnl __devitem(rd, {-rd*-}, {-rd-})dnl
1.31 todd 126: dnl
1.41 todd 127: dnl Note: not all disks are generated in 'all)'. (e.g. vax has a lot of
128: dnl disks that are not generated by 'all)')
129: dnl
1.31 todd 130: dnl
1.29 todd 131: _mkdev(loc, local, {-test -s $T.local && sh $T.local-})dnl
1.1 todd 132: dnl
1.29 todd 133: __devtitle(make, Device "make" file. Valid arguments)dnl
134: __devitem({-all-}, {-all-},
1.4 todd 135: {-makes all known devices{-,-} including local devices.
1.1 todd 136: {-#-} Tries to make the ``standard'' number of each type.-})dnl
137: dnl
138: dnl
1.29 todd 139: target(all, mcd, 0)dnl
140: twrget(all, fdesc, fd)dnl
141: target(all, st, 0, 1)dnl
142: target(all, std)dnl
143: target(all, raid, 0, 1, 2, 3)dnl
144: target(all, rz, 0, 1, 2, 3, 4)dnl
145: target(all, hp, 0, 1, 2, 3)dnl
146: target(all, ra, 0, 1, 2, 3)dnl
147: target(all, rx, 0, 1)dnl
148: target(all, wd, 0, 1, 2, 3)dnl
149: target(all, xd, 0, 1, 2, 3)dnl
150: twrget(all, aflo, fd, 0, 1, 2, 3)dnl
1.46 provos 151: target(all, systrace)dnl
1.29 todd 152: target(all, pctr)dnl
153: target(all, pctr0)dnl
154: target(all, altq)dnl
155: target(all, pf)dnl
156: twrget(all, cry, crypto)dnl
157: target(all, apm)dnl
158: twrget(all, tth, ttyh, 0, 1)dnl
159: target(all, ttyA, 0, 1)dnl
160: target(all, ttyB, 0, 1, 2, 3, 4, 5)dnl
1.40 deraadt 161: twrget(all, attyB, ttyB, 0, 1, 2, 3, 4)dnl
1.29 todd 162: target(all, tty0, 0, 1, 2, 3)dnl
163: twrget(all, mac_tty0, tty0, 0, 1)dnl
164: twrget(all, tzs, tty, a, b, c, d)dnl
165: twrget(all, czs, cua, a, b, c, d)dnl
166: target(all, ttyc, 0, 1, 2, 3, 4, 5, 6, 7)dnl
167: twrget(all, com, tty0, 0, 1, 2, 3)dnl
168: twrget(all, mac_ttye, ttye, 0)dnl
169: target(all, ttye, 0, 1, 2, 3, 4, 5, 6)dnl
170: target(all, lkm)dnl
171: twrget(all, mmcl, mmclock)dnl
172: target(all, lpt, 0, 1, 2)dnl
173: twrget(all, lpt, lpa, 0, 1, 2)dnl
174: target(all, joy, 0, 1)dnl
1.41 todd 175: twrget(all, rnd, random)dnl
1.29 todd 176: target(all, uk, 0)dnl
177: target(all, wt, 0)dnl
178: target(all, wdt, 0)dnl
179: twrget(all, au, audio, 0)dnl
180: twrget(all, speak, speaker)dnl
181: target(all, asc, 0)dnl
182: target(all, music, 0)dnl
183: target(all, radio, 0)dnl
184: target(all, tuner, 0)dnl
185: target(all, rmidi, 0, 1, 2, 3, 4, 5, 6, 7)dnl
186: target(all, usbs)dnl
187: target(all, adb)dnl
188: target(all, iop, 0, 1)dnl
189: target(all, pci)dnl
190: twrget(all, wsmouse, wscons)dnl
191: twrget(all, btw, bwtwo, 0)dnl
192: twrget(all, ctw, cgtwo, 0)dnl
193: twrget(all, ctr, cgthree, 0)dnl
194: twrget(all, cfr, cgfour, 0)dnl
195: twrget(all, csx, cgsix, 0)dnl
196: twrget(all, ceg, cgeight, 0)dnl
197: twrget(all, cfo, cgfourteen, 0)dnl
198: target(all, tcx, 0)dnl
1.40 deraadt 199: twrget(all, grf_mac, grf, 0, 1, 2, 3)dnl
1.29 todd 200: twrget(all, grf_amiga, grf, 0, 1, 2, 3, 4, 5, 6)dnl
201: target(all, par, 0)dnl
202: twrget(all, amouse, mouse, 0, 1)dnl
203: twrget(all, akbd, kbd)dnl
204: target(all, apci, 0)dnl
205: target(all, ppi, 0)dnl
206: target(all, view0, 0, 1, 2, 3, 4, 5)dnl
207: target(all, local)dnl
1.49 fgsch 208: target(all, gpr, 0)dnl
1.18 todd 209: dnl
1.29 todd 210: _mkdev(all, {-all-}, {-dnl
1.18 todd 211: show_target(all)dnl
212: -})dnl
213: dnl
1.34 deraadt 214: __devitem(ramdisk, ramdisk, devices to be put on ramdisk-based media)dnl
1.29 todd 215: __devitem(std, {-std-}, standard devices)dnl
1.1 todd 216: dnl
1.18 todd 217: dnl
218: dnl
1.1 todd 219: dnl _std
220: dnl
221: dnl $1: tty
222: dnl $2: memstuff
223: dnl $3: ksyms
224: dnl $4: drum
225: dnl $5: klog
226: dnl
1.29 todd 227: define({-_std-}, {-dnl
1.1 todd 228: std)
229: M console c 0 0 600
230: M tty c $1 0
231: M mem c $2 0 640 kmem
232: M kmem c $2 1 640 kmem
233: M null c $2 2
234: M zero c $2 12
235: M stdin c major_fdesc_c 0
236: M stdout c major_fdesc_c 1
237: M stderr c major_fdesc_c 2
238: M ksyms c $3 0 640 kmem
239: M drum c $4 0 640 kmem
240: M klog c $5 0 600-})dnl
241: dnl
1.29 todd 242: target(usb, usb, 0, 1)dnl
243: target(usb, urio, 0)dnl
244: twrget(usb, uscan, uscanner, 0)dnl
245: target(usb, uhid, 0, 1, 2, 3)dnl
246: target(usb, ulpt, 0, 1)dnl
247: target(usb, ugen, 0, 1)dnl
248: target(usb, utty, 0, 1)dnl
1.18 todd 249: dnl
1.29 todd 250: __devitem({-usbs-}, usbs, make USB devices)dnl
251: _mkdev(usbs, usbs, {-dnl
1.18 todd 252: show_target({-usb-})dnl
253: -})dnl
1.29 todd 254: __devtitle(tap, Tapes)dnl
255: __devitem(wt, {-wt* -}, QIC-interface (e.g. not SCSI) 3M cartridge tape)dnl
256: _mkdev(wt, wt*,
1.1 todd 257: {-name=wt
1.29 todd 258: n=Mult($U, 8) m=Add($n, 4)
1.1 todd 259: M $name$U b major_wt_b $n 640 operator
260: M r$name$U c major_wt_c $n 640 operator
261: M n$name$U b major_wt_b $m 640 operator
262: M nr$name$U c major_wt_c $m 640 operator-})dnl
1.29 todd 263: __devitem(tz, tz*, {-SCSI tapes{-,-} DEC TK50 cartridge tape-})dnl
264: __devitem(st, {-st*-}, SCSI tapes)dnl
265: _mkdev(st, st*, {-n=Mult($U, 16)
1.1 todd 266: for pre in " " n e en
267: do
268: M ${pre}st$U b major_st_b $n 660 operator
269: M ${pre}rst$U c major_st_c $n 660 operator
1.29 todd 270: n=Add($n, 1)
1.1 todd 271: done-})dnl
1.29 todd 272: __devitem(ct, ct*, HP300 HP-IB cartridge tape)dnl
273: __devitem(mt, mt*, (Magnetic) 9-track reel tape)dnl
274: __devitem(ht, ht*, massbus tm03 & tu??)dnl
275: __devitem(tm, tm*, unibus tm11 & te10 emulations (e.g. Emulex tc-11))dnl
276: __devitem(ts, ts*, unibus ts11)dnl
277: __devitem(ut, ut*, unibus tu45 emulations (e.g.si 9700))dnl
278: __devtitle(dis, Disks)dnl
279: __devitem(rz, rz*, SCSI disks)dnl
1.31 todd 280: __devitem(sd, {-sd*-}, {-SCSI disks, includes flopticals-})dnl
1.29 todd 281: __devitem(hd, {-hd*-}, HP300 HP-IB disks)dnl
282: __devitem(cd, {-cd*-}, SCSI cdrom drives)dnl
283: __devitem(acd, acd*, ATAPI cdrom drives)dnl
284: _mkdev(cd, cd*, {-dodisk2 cd $U major_cd_b major_cd_c $U 0{--}ifstep(cd)-})dnl
285: __devitem(mcd, mcd*, Mitsumi cdrom drives)dnl
286: _mkdev(mcd, mcd*, {-dodisk2 mcd $U major_mcd_b major_mcd_c $U 0{--}ifstep(mcd)dnl
287: -})dnl
288: __devitem(ch, {-ch*-}, SCSI media changer)dnl
289: _mcdev(ch, ch*, ch, {-major_ch_c-}, 660, operator)dnl
290: __devitem(uk, uk*, SCSI Unknown device)dnl
291: _mcdev(uk, uk*, uk, {-major_uk_c-}, 640, operator)dnl
292: __devitem(ss, ss*, SCSI scanners)dnl
1.31 todd 293: _mkdev(ss, ss*, {-M ss$U c major_ss_c Mult($U,16) 640 operator
294: M nss$U c major_ss_c Add(Mult($U,16),1) 640 operator
295: M enss$U c major_ss_c Add(Mult($U,16),3) 640 operator
1.1 todd 296: RMlist="$RMlist scan$U"
297: MKlist="$MKlist;umask 77;ln -s ss$U scan$U"-})dnl
1.29 todd 298: __devitem(ses, ses*, SES/SAF-TE SCSI devices)dnl
299: _mkdev(ses, ses*, {-M ses$U c major_ses_c $U 640 operator-})dnl
300: __devitem(ramd, ramdisk, makes all devices for a ramdisk kernel)dnl arc
301: _mkdev(ramd, ramdisk, {-dnl
1.20 todd 302: show_target(ramd)dnl
1.29 todd 303: -})dnl
304: target(ramd, std)dnl
305: target(ramd, random)dnl
306: target(ramd, bpf, 0)dnl
1.34 deraadt 307: __devitem(rd, {-rd*-}, "rd" pseudo-disks)dnl
1.29 todd 308: _mkdev(rd, rd*, {-dodisk2 rd $U major_rd_b major_rd_c $U 0{--}ifstep(rd)-})dnl
309: __devitem(xd, xd*, Xylogic 753/7053 disks)dnl
310: __devitem(xy, xy*, {- Xylogic 450/451 disks-})dnl
311: __devitem(flo, {-fd*-}, {-Floppy disk drives (3 1/2"{-,-} 5 1/4")-})dnl
312: _mkdev(flo, fd*,
1.1 todd 313: {-typnam=$U${i#fd[01]*}
314: case $typnam in
315: 0|1) typnum=0;; # no type specified, assume A
1.26 deraadt 316: *A) typnum=0; typnam=0;;
317: *B) typnum=1;;
318: *C) typnum=2;;
319: *D) typnum=3;;
320: *E) typnum=4;;
321: *F) typnum=5;;
322: *G) typnum=6;;
323: *H) typnum=7;;
324: *) echo bad type $typnam for $i; exit 1;;
1.1 todd 325: esac
326: case $U in
327: 0|1) blk=major_flo_b; chr=major_flo_c;;
328: *) echo bad unit $U for $i; exit 1;;
329: esac
330: nam=fd${typnam}
1.29 todd 331: n=Add(Mult($U, 128), Mult($typnum, 16))
1.1 todd 332: M ${nam}a b $blk $n 640 operator
1.29 todd 333: M ${nam}b b $blk Add($n, 1) 640 operator
334: M ${nam}c b $blk Add($n, 2) 640 operator
1.1 todd 335: M r${nam}a c $chr $n 640 operator
1.29 todd 336: M r${nam}b c $chr Add($n, 1) 640 operator
337: M r${nam}c c $chr Add($n, 2) 640 operator-}, 664)dnl
338: __devitem(aflo, ramdisk, devices needed for install floppies)dnl
339: _mkdev(aflo, fd*, {-case $U in 0|1|2|3)
340: M fd${U}a b major_aflo_b Mult($U, 16) 640 operator
341: M fd${U}b b major_aflo_b Add(Mult($U, 16), 1) 640 operator
342: M rfd${U}a c major_aflo_c Mult($U, 16) 640 operator
343: M rfd${U}b c major_aflo_c Add(Mult($U, 16), 1) 640 operator;;
1.1 todd 344: *) echo bad unit for floppy disk in: $i;;
345: esac-})dnl
1.29 todd 346: __devitem(iop, iop*, I2O controller device)dnl
347: _mcdev(iop, iop*, iop, {-major_iop_c-}, 660)dnl
348: __devitem(wdt, wdt0, watchdog timer)dnl
349: _mcdev(wdt, wdt0, wdt, {-major_wdt_c-}, 440, operator)dnl
350: __devitem(local, local, configuration specific devices)dnl
351: __devitem(wd, {-wd*-}, {-"winchester" disk drives (ST506, IDE, ESDI, RLL, ...)-})dnl
352: __devitem(ccd, ccd*, concatenated disk devices)dnl
353: __devitem(raid, raid*, RAIDframe disk devices)dnl
354: __devitem(vnd, vnd*, "file" pseudo-disks)dnl
355: _mkdev(vnd, vnd*, {-dodisk vnd $U major_vnd_b major_vnd_c $U 0{--}ifstep(vnd)
1.6 todd 356: dodisk svnd $U major_vnd_b major_vnd_c $U 128{--}ifstep(vnd)-})dnl
1.29 todd 357: __devitem(ra, ra*, {-MSCP disks (ra??, hd??)-})dnl
358: __devitem(hp, hp*, {-massbuss rm??-})dnl
359: __devitem(hk, hk*, {-unibus rk06 and rk07-})dnl
360: __devitem(up, up*, {-other unibus devices (e.g. on Emulex sc-21v controller)-})dnl
361: __devitem(rb, rb*, {-730 idc w/ rb80 and/or rb02-})dnl
362: __devitem(rx, rx*, {-MSCP floppy disk (rx33/50/...)-})dnl
363: __devitem(rl, rl*, {-unibus r102-})dnl
364: __devitem(hd, hd*, {-HDC9224 hd disks on VS2000-})dnl
1.1 todd 365: dnl
366: dnl For normal disk devices, add a disk_q entry; anything else define like
367: dnl the rest (such as vnd above).
368: dnl
1.18 todd 369: disk_q({-ccd-})dnl
370: disk_q({-hd-})dnl
371: disk_q({-hk-})dnl
372: disk_q({-hp-})dnl
373: disk_q({-ra-})dnl
374: disk_q({-raid-})dnl
375: disk_q({-rb-})dnl
376: disk_q({-rl-})dnl
377: disk_q({-rx-})dnl
378: disk_q({-sd-})dnl
1.1 todd 379: disk_q({-xy-})dnl
380: disk_q({-xd-})dnl
1.18 todd 381: disk_q({-up-})dnl
382: disk_q({-wd-})dnl
1.1 todd 383: disk_q({-rz-})dnl
384: dnl
1.29 todd 385: __devitem(loc, local, configuration specific devices)dnl
386: _mkdev(loc, local, {-test -s $T.local && sh $T.local-})dnl
387: _mkdev({-disks-}, {-undefine({-C_ase-})show_disks()undefine({-C_ase-})-},
1.1 todd 388: {-case $i in
389: show_disks2()dnl
1.6 todd 390: esac-})dnl
1.1 todd 391: __mkdev({-disks-}){--}dnl
392: dnl
1.29 todd 393: __devtitle(cons, Console ports)dnl
394: __devitem(ttyv0, ttyv0, pccons or pcvt screen 0)dnl
395: __devitem(ttyv, ttyv*, pcvt)dnl
396: __devitem(ttye, ttye*, ite bitmapped consoles)dnl
397: __devitem(mac_ttye, ttye*, ite bitmapped consoles)dnl
398: __devitem(wscons, ttyC0, wscons screen 0)dnl
1.35 todd 399: twrget(wscons, wscons, ttyC, cfg, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b)dnl
400: target(wscons, wsmux)dnl
401: target(wscons, wskbd, 0, 1, 2, 3)dnl
402: target(wscons, wsmouse, 0, 1, 2, 3)dnl
1.29 todd 403: _mkdev({-wscons-}, {-wscons-}, {-dnl
1.35 todd 404: show_target(wscons)dnl
405: -})dnl
1.36 todd 406: __devitem(wsdisp, ttyC-F*, wscons virtual consoles)dnl
1.35 todd 407: _mkdev({-wsdisp-}, tty[C-F]*, {-U=${i##tty[C-F]}
408: case $i in
409: ttyC*) n=C m=expr(0*256);;
410: ttyD*) n=D m=expr(1*256);;
411: ttyE*) n=E m=expr(2*256);;
412: ttyF*) n=F m=expr(3*256);;
413: esac
1.3 todd 414: case $U in
1.35 todd 415: [0-9a-f]) M tty$n$U c major_wsdisp_c {-$(( 16#$U + $m ))-} 600;;
416: cfg) M tty${n}cfg c major_wsdisp_c Add(255,$m) 600;;
1.3 todd 417: *) echo bad unit $U for $i; exit 1;;
1.6 todd 418: esac-})dnl
1.29 todd 419: __devitem(wskbd, wskbd*, wscons keyboards)dnl
420: _mkdev(wskbd, wskbd*, {-M wskbd$U c major_wskbd_c $U 600-})dnl
421: __devitem(wsmux, wsmux, wscons keyboard/mouse mux devices)dnl
422: _mkdev(wsmux, wsmux|wsmouse|wskbd, {-M wsmouse c major_wsmux_c 0 600
1.1 todd 423: M wskbd c major_wsmux_c 1 600-})dnl
1.29 todd 424: __devitem(pcons, console, PROM console)dnl
425: __devtitle(point, Pointing devices)dnl
426: __devitem(wsmouse, wsmouse*, wscons mice)dnl
427: _mkdev(wsmouse, wsmouse*, {-M wsmouse$U c major_wsmouse_c $U 600-})dnl
428: __devitem(quad, quadmouse, "quadrature mouse")dnl
429: __devtitle(pty, Pseudo terminals)dnl
430: __devitem(tty, tty*, set of 16 slave psuedo terminals)dnl
431: __devitem(pty, pty*, set of 16 master pseudo terminals)dnl
1.31 todd 432: _mkdev(pty, pty*, {-if [ $U -gt 15 ]; then
433: echo bad unit for pty in: $i
434: continue
435: fi
436: set -A tbl p q r s t u v w x y z P Q R S T
437: name=${tbl[$U]}
1.1 todd 438: n=0
439: while [ $n -lt 16 ]
440: do
441: nam=$name$(hex $n)
1.31 todd 442: off=Mult($U, 16)
1.29 todd 443: M tty$nam c major_tty_c Add($off, $n)
444: M pty$nam c major_pty_c Add($off, $n)
445: n=Add($n, 1)
1.1 todd 446: done-})dnl
1.29 todd 447: __devitem(dc, dc*, {-4 channel serial interface (keyboard{-,-} mouse{-,-}modem{-,-} printer)-})dnl
448: __devtitle(prn, Printers)dnl
449: __devitem(par, par*, motherboard parallel port)dnl
450: __devitem(lpt, lpt*, IEEE 1284 centronics printer)dnl
451: _mkdev(lpt, lpt*|lpa*,
1.1 todd 452: {-case $i in
453: lpt*) n=lpt f=0;;
454: lpa*) n=lpa f=128;;
455: esac
1.29 todd 456: M $n$U c major_lpt_c Add($U, $f) 600-})dnl
457: __devitem(lpa, lpa*, interruptless lp)dnl
458: __devitem(ppi, ppi*, HP-IB plotters)dnl
459: __devtitle({-usb-}, USB devices)dnl
460: __devitem({-usb-}, usb*, Bus control devices used by usbd for attach/detach)dnl
461: _mkdev({-usb-}, usb*, {-[ "$i" = "usb" ] && u= || u=$U
1.1 todd 462: M usb$u c major_usb_c $U 660-})dnl
1.29 todd 463: __devitem(uhid, uhid*, Generic HID devices)dnl
464: _mcdev({-uhid-}, uhid*, {-uhid-}, {-major_uhid_c-}, 660)dnl
465: __devitem(ulpt, ulpt*, Printer devices)dnl
466: _mcdev({-ulpt-}, ulpt*, {-ulpt-}, {-major_ulpt_c-}, 660)dnl
467: __devitem(utty, utty*, Serial ports)dnl
468: _mcdev({-utty-}, utty*, {-utty-}, {-major_utty_c-}, 660)dnl
469: __devitem(urio, urio*, Diamond Multimedia Rio 500)dnl
470: _mcdev({-urio-}, urio*, {-urio-}, {-major_urio_c-}, 660)dnl
471: __devitem(uscan, uscanner*, Scanners)dnl
472: _mcdev({-uscan-}, uscanner*, {-uscanner-}, {-major_uscan_c-}, 660)dnl
473: __devitem(ugen, ugen*, Generic device)dnl
474: _mkdev(ugen, ugen*, {-n=Mult($U, 16)
1.1 todd 475: for j in 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
476: do
1.29 todd 477: M ugen$U.$j c major_ugen_c Add($n, $j) 660
1.1 todd 478: done-})dnl
1.29 todd 479: __devtitle(cpu, Cpus)dnl
480: __devitem(cpu, cpu*, cpus)dnl
481: __devtitle(call, Call units)dnl
482: __devtitle(term, Terminal ports)dnl
483: __devtitle(termp, Terminal multiplexers)dnl
484: __devitem(dca, dca*, HP200/300 single port serial interface)dnl
485: __devitem(dcm, dcm*, HP200/300 4 port serial mux interface)dnl
486: __devitem(apci, apci*, HP400 4 port serial mux interface)dnl
487: __devitem({-com-}, {-tty0*-}, NS16x50 serial ports)dnl
488: _mkdev(com, {-tty0*-}, {-M tty$U c major_com_c $U 660 dialer uucp
489: M cua$U c major_com_c Add($U, 128) 660 dialer uucp-})dnl
490: __devitem(ttyc, ttyc*, Cyclades serial ports)dnl
491: __devitem(tzs, tty[a-z]*, Zilog 8530 Serial Port)dnl
492: _mkdev(tzs, {-tty[a-z]-}, {-u=${i#tty*}
1.1 todd 493: case $u in
494: a) n=0 ;;
495: b) n=1 ;;
496: c) n=4 ;;
497: d) n=5 ;;
498: *) echo unknown tty device $i ;;
499: esac
500: M tty$u c major_tzs_c $n 660 dialer uucp-})dnl
1.29 todd 501: __devitem(tth, ttyh*, Sab82532 serial devices)dnl
502: _mkdev(tth, ttyh*, {-M ttyh$U c major_tth_c $U 660 dialer uucp-})dnl
503: __devitem(czs, cua[a-z]*, Zilog 8530 Serial Port)dnl
504: _mkdev(czs, cua[a-z], {-u=${i#cua*}
1.1 todd 505: case $u in
506: a) n=0 ;;
507: b) n=1 ;;
508: c) n=4 ;;
509: d) n=5 ;;
1.41 todd 510: *) echo unknown cua device $i ;;
1.1 todd 511: esac
1.29 todd 512: M cua$u c major_czs_c Add($n, 128) 660 dialer uucp-})dnl
513: __devitem(arm_tty, tty*, {-alias for PC COM ports{-,-} this is what the system really wants-})dnl
514: __devitem(tty0, tty00, standard serial port)dnl
515: __devitem(mac_tty0, tty00, standard serial port)dnl
516: __devitem(ttyA, ttyA*, mfc serial ports)dnl
517: __devitem(attyB, ttyB*, ISA COM ports)dnl amiga
518: __devitem(ttyz, tty[a-d], onboard zs serial ports)dnl
519: __devitem(cuaz, cua[a-d], onboard zs serial ports)dnl
520: __devitem(ttyB, ttyB?, DEC 3000 ZS8530 ("scc") serial ports)dnl
521: __devitem(scc, scc*, 82530 serial interface)dnl
522: __devitem(arc_ttyC, ttyC0, pccons)dnl
523: __devitem(i386_ttyC, ttyC*, pcvt)dnl
524: __devitem(ttyC, ttyC?, {-AlphaStation NS16550 ("com serial ports")-})dnl
525: __devitem(ttyE, ttyE?, Workstation console (framebuffer & keyboard) tty emulators)dnl
526: __devitem(ser02, ser02, {-serial2 port (channel A on 8530)-})dnl
527: __devitem(mdm02, mdm02, {-modem2 port (channel B on 8530)-})dnl
528: __devtitle(spec, Special purpose devices)dnl
529: __devitem(apm, apm , power management device)dnl
530: _mkdev(apm, apm*, {-M apm c major_apm_c 0 644
1.1 todd 531: M apmctl c major_apm_c 8 644-})dnl
1.29 todd 532: __devitem(pcmcia, pcmcia*, PCMCIA card drivers)dnl
533: __devitem(pctr, pctr*, PC Performance Tuning Register access device)dnl
534: _mkdev(pctr, pctr, {-M pctr c major_pctr_c 0 644-})dnl
1.46 provos 535: __devitem(systrace, systrace*, system call tracing device)dnl
536: _mkdev(systrace, systrace, {-M systrace c major_systrace_c 0 644-})dnl
1.29 todd 537: __devitem(au, audio*, audio device)dnl
538: _mkdev(au, audio*, {-M sound$U c major_au_c $U
539: M mixer$U c major_au_c Add($U, 16)
540: M audio$U c major_au_c Add($U, 128)
541: M audioctl$U c major_au_c Add($U, 192)
1.1 todd 542: MKlist="$MKlist;[ -e audio ] || ln -s audio$U audio"
543: MKlist="$MKlist;[ -e mixer ] || ln -s mixer$U mixer"
544: MKlist="$MKlist;[ -e sound ] || ln -s sound$U sound"
545: MKlist="$MKlist;[ -e audioctl ] || ln -s audioctl$U audioctl"-})dnl
1.29 todd 546: __devitem(asc, asc*, ASC Audio device)dnl
547: _mkdev(asc, asc*, {-M asc$U major_asc_c 0-})dnl
548: __devitem(music, music*, midi devices)dnl
549: _mkdev(music, music*, {-M music$U c major_music_c $U
550: M sequencer$U c major_music_c Add($U, 128)
1.1 todd 551: MKlist="$MKlist;[ -e music ] || ln -s music$U music"
552: MKlist="$MKlist;[ -e sequencer ] || ln -s sequencer$U sequencer"-})dnl
1.29 todd 553: __devitem(radio, radio*, FM tuner device)dnl
554: _mkdev(radio, radio*, {-M radio$U c major_radio_c $U
1.8 todd 555: MKlist="$MKlist;[ -e radio ] || ln -s radio$U radio"-})dnl
1.29 todd 556: __devitem(fdesc, fd, makes fd/* for the fdescfs)dnl
557: _mkdev(fdesc, fd, {-RMlist="mkdir -p fd;$RMlist" n=0
558: while [ $n -lt 64 ];do M fd/$n c major_fdesc_c $n;n=Add($n, 1);done
1.1 todd 559: MKlist="$MKlist;chmod 555 fd"-})dnl
1.29 todd 560: __devtitle(graph, Graphics devices)dnl
561: __devitem(grf_mac, grf*, {-custom chip (grf0){-,-} Retina Z2/Z3 (grf1/grf2){-,-}
1.1 todd 562: {-#-} Cirrus boards (grf3){-,-} A2410 (grf4) video or
563: {-#-} CyberVision 64 (grf5)-})dnl
1.29 todd 564: __devitem(grf_amiga, grf*, {-Motherboard bitmapped video.-})dnl
565: __devitem(ite, ite*, terminal emulator interface to HP300 graphics devices)dnl
566: __devitem({-hil-}, {-hil-}, HP300 HIL input devices)dnl
567: __devitem(oppr, openprom)dnl
568: _cdev(oppr, openprom, 70, 0)dnl
569: __devitem(btw, bwtwo*)dnl
570: _mcdev(btw, bwtwo*, bwtwo, {-major_btw_c-}, 666)dnl
571: __devitem(ctw, cgtwo*)dnl
572: _mcdev(ctw, cgtwo*, cgtwo, {-major_ctw_c-}, 666)dnl
573: __devitem(ctr, cgthree*)dnl
574: _mcdev(ctr, cgthree*, cgthree, {-major_ctr_c-}, 666)dnl
575: __devitem(cfr, cgfour*)dnl
576: _mcdev(cfr, cgfour*, cgfour, {-major_cfr_c-}, 666)dnl
577: __devitem(csx, cgsix*)dnl
578: _mcdev(csx, cgsix*, cgsix, {-major_csx_c-}, 666)dnl
579: __devitem(ceg, cgeight*)dnl
580: _mcdev(ceg, cgeight*, cgeight, {-major_ceg_c-}, 666)dnl
581: __devitem(cfo, cgfourteen*)dnl
582: _mcdev(cfo, cgfourteen*, cgfourteen, {-major_cfo_c-})dnl
583: __devitem(tcx, tcx*)dnl
584: _mcdev(tcx, tcx*, tcx, {-major_tcx_c-})dnl
585: __devitem(cry, crypto, hardware crypto access driver)dnl
586: _mkdev(cry, crypto, {-M crypto c major_cry_c-} 0)dnl
587: __devitem(pf, pf*, Packet Filter)dnl
588: _mkdev(pf, {-pf*-}, {-M pf c major_pf_c 0 600-})dnl
589: __devitem(bpf, bpf*, Berkeley Packet Filter)dnl
590: _mkdev(bpf, {-bpf*-}, {-M bpf$U c major_bpf_c $U 600-}, 600)dnl
591: _mkdev(tun, {-tun*-}, {-M tun$U c major_tun_c $U 600-}, 600)dnl
592: __devitem(altq, altq/, ALTQ control interface)dnl
593: _mkdev(altq, altq, {-RMlist="mkdir -p altq;$RMlist"
1.1 todd 594: for d in altq cbq wfq afm fifoq red rio localq hfsc cdnr blue priq; do
595: M altq/$d c major_altq_c $U 644
1.29 todd 596: U=Add($U, 1)
1.1 todd 597: done-})dnl
1.29 todd 598: __devitem(speak, speaker, pc speaker)dnl
599: _mkdev(speak, speaker, {-M speaker c major_speak_c 0 600-})dnl
600: __devitem(kbd, kbd, keyboard (provides events, for X11))dnl
601: _cdev(kbd, kbd, {-major_kbd_c-}, 0, 600)dnl
602: __devitem(kbd_atari, kbd, Atari keyboard)dnl
603: __devitem(akbd, kbd, Amiga keyboard)dnl
604: __devitem(rkbd, kbd, raw keyboard)dnl
605: __devitem(kbdctl, kbdctl, keyboard control)dnl
606: __devitem(beep, beep, riscpc speaker)dnl
607: __devitem(iic, iic*, IIC bus device)dnl
608: __devitem(rtc, rtc*, RTC device)dnl
609: __devitem(view, view*, generic interface to graphic displays)dnl
610: __devitem(aconf, aconf, {-autoconfig information (not yet)-})dnl
611: __devitem(mouse-, mouse-*, "mouse link")dnl
612: __devitem(mouse, mouse, mouse (provides events, for X11))dnl
613: __devitem(amouse, mouse*, Amiga mice)dnl
614: __devitem(lkm, lkm, loadable kernel modules interface)dnl
615: _cdev(lkm, lkm, {-major_lkm_c-}, 0, 640, kmem)dnl
616: __devitem(mmcl, mmclock, memory mapped clock)dnl
617: __devitem(tun, tun*, network tunnel driver)dnl
618: __devitem(rnd, *random, inkernel random data source)dnl
619: _mkdev(rnd, *random, {-n=0
1.1 todd 620: for pre in " " s u p a
621: do
622: M ${pre}random c major_rnd_c $n 644
1.29 todd 623: n=Add($n, 1)
624: done-}, 644)dnl
625: __devitem(joy, joy*, joystick driver)dnl
626: _mcdev(joy, joy*, joy, {-major_joy_c-}, 666)dnl
627: __devitem(mag, magma*, magma card (makes 16 tty and 2 bpp))dnl
628: __devitem(bppmag, bppmag[mno], magma parallel port device)dnl
629: __devitem(spif, spif*, spif card (makes 8 tty and 1 bpp))dnl
630: __devitem(bppsp, bpp[jkl], spif parallel port device)dnl
631: _mkdev(mag, magma*, {-case $U in
1.18 todd 632: 0) offset=0 nam=m;;
633: 1) offset=16 nam=n;;
634: 2) offset=32 nam=o;;
635: *) echo "bad unit for $i: $U"; exit 127;;
636: esac
1.29 todd 637: offset=Mult($U, 64)
1.18 todd 638: n=0
639: while [ $n -lt 16 ]
640: do
641: name=${nam}`hex $n`
1.29 todd 642: M tty$name c major_mag_c Add($offset, $n) 660 dialer uucp
643: n=Add($n, 1)
1.18 todd 644: done
1.29 todd 645: M bpp${nam}0 c major_bppmag_c Add($offset, 0) 600
646: M bpp${nam}1 c major_bppmag_c Add($offset, 1) 600-})dnl
647: _mkdev(spif, spif*, {-case $U in
1.18 todd 648: 0) offset=0 nam=j;;
649: 1) offset=16 nam=k;;
650: 2) offset=32 nam=l;;
651: *) echo "bad unit for $i: $U"; exit 127;;
652: esac
1.29 todd 653: offset=Mult($U, 64)
1.18 todd 654: n=0
655: while [ $n -lt 8 ]
656: do
657: name=${nam}`hex $n`
1.29 todd 658: M tty$name c major_spif_c Add($offset, $n) 660 dialer uucp
659: n=Add($n, 1)
1.18 todd 660: done
1.29 todd 661: M bpp${nam}0 c major_bppsp_c Add($offset, 0) 600-})dnl
662: __devitem(bpp, bpp*, parallel port devices)dnl
663: __devitem(xfs, xfs*, XFS filesystem devices)dnl
664: _mcdev(xfs, xfs*, xfs, {-major_xfs_c-}, 600)dnl
665: __devitem(hil, hil, HIL input devices)dnl
666: __devitem(rmidi, rmidi*, raw midi devices)dnl
667: _mcdev(rmidi, rmidi*, rmidi, {-major_rmidi_c-}, 666)dnl
668: __devtitle(plat, Platform-specific devices)dnl
669: __devitem(fb, fb*, framebuffer device)dnl
670: __devitem(bktr, bktr*, video capturing)dnl
671: _mcdev(bktr, bktr*, bktr, {-major_bktr_c-}, 644)dnl
672: __devitem(tuner, tuner*, tuner device)dnl
673: _mkdev(tuner, tuner*, {-M tuner$U c major_bktr_c Add(Mult($U, 2), 16) 644-}, 644)dnl
674: __devitem(pci, pci, PCI bus device)dnl
1.43 deraadt 675: _mkdev(pci, pci, {-M pci c major_pci_c 0 600-}, 600)dnl
1.29 todd 676: __devitem(adb, adb, Apple Desktop bus event interface)dnl
677: _mkdev(adb, adb, {-M adb c major_adb_c 0-})dnl
678: __devitem(pdc, pdc, PDC device)dnl
679: _mkdev(local, local, {-test -s $T.local && sh $T.local-}, 666)dnl
1.49 fgsch 680: __devitem(gpr, gpr*, gpr400 pcmcia device)dnl
681: _mcdev(gpr, gpr*, gpr, {-major_gpr_c-})dnl
1.1 todd 682: dnl
683: divert(1)dnl
684: include(etc.MACHINE/MAKEDEV.md)dnl
685: dnl
686: dnl
687: divert(0)dnl
688: #!/bin/sh -
689: #
690: # THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT.
691: # generated from:
692: #
693: show_vers()dnl <-- now that all files are included, show versions
694: #
695: dnl
696: divert(2)dnl
697: PATH=/sbin:/usr/sbin:/bin:/usr/bin
698: T=$0
699:
700: # set this to echo for Echo-Only debugging
701: [ "$eo" ] || eo=
702:
703: hex()
704: {
705: case ${--}1 in
1.26 deraadt 706: [0-9]) echo -n {-$-}1;;
707: 10) echo -n a;;
708: 11) echo -n b;;
709: 12) echo -n c;;
710: 13) echo -n d;;
711: 14) echo -n e;;
712: 15) echo -n f;;
1.1 todd 713: esac
714: }
1.26 deraadt 715:
1.1 todd 716: trunc()
717: {
718: # XXX pdksh can't seem to deal with locally scoped variables
719: # in ${foo#$bar} expansions
720: arg1="{-$-}1"
721: arg2="{-$-}2"
722: case {-$-}3 in
723: l) echo ${arg2#$arg1} ;;
724: r|*) echo ${arg1#$arg2} ;;
725: esac
726: }
1.26 deraadt 727:
1.1 todd 728: unt()
729: {
730: # XXX pdksh can't seem to deal with locally scoped variables
731: # in ${foo#$bar} expansions
732: arg="{-$-}1"
733: tmp="${arg#[a-zA-Z]*}"
734: tmp="${tmp%*[a-zA-Z]}"
735: while [ "$tmp" != "$arg" ]
736: do
737: arg=$tmp
738: tmp="${arg#[a-zA-Z]*}"
739: tmp="${tmp%*[a-zA-Z]}"
740: done
741: echo $arg
742: }
743: dnl
1.29 todd 744: dnl dodisk(name, unit, blkmaj, chrmaj, unit, off[, stepping])
1.5 todd 745: dnl arg: 1 2 3 4 5 6 7
1.1 todd 746: dnl
1.26 deraadt 747:
1.1 todd 748: dodisk()
749: {
1.27 todd 750: [ "$DEBUG" ] && set -x
1.29 todd 751: n=Add(Mult(${5}, ${7:-16}), ${6}) count=0
1.1 todd 752: RMlist="$RMlist {-$-}1{-$-}2? r{-$-}1{-$-}2?"
1.13 todd 753: [ 0$7 -ne 8 ] && l="i j k l m n o p"
754: for d in a b c d e f g h $l
1.1 todd 755: do
1.29 todd 756: M {-$-}1{-$-}2$d b {-$-}3 Add($n, $count) 640
757: M r{-$-}1{-$-}2$d c {-$-}4 Add($n, $count) 640
1.1 todd 758: let count=count+1
759: done
760: MKlist="$MKlist;chown root.operator {-$-}1{-$-}2? r{-$-}1{-$-}2?"
761: }
762: dnl
1.29 todd 763: dnl dodisk2(name, unit, blkmaj, chrmaj, unit, off[, stepping])
1.1 todd 764: dnl
765: dnl 1. name - prefix name of the device
766: dnl 2. unit - beginning unit number for block devices
767: dnl 3. blkmaj - block device major number
768: dnl 4. chrmaj - character device major number
769: dnl 5. unit - beginning unit number for character devices
770: dnl 6. off - offset from 0 for all minor numbers (see svnd for an example)
1.5 todd 771: dnl 7. step - optional, defaults to 16, number of partitions per device
1.1 todd 772: dnl
1.26 deraadt 773:
1.1 todd 774: dodisk2()
775: {
1.29 todd 776: n=Add(Mult({-$-}5, ${7:-16}), {-$-}6)
1.1 todd 777: M {-$-}1{-$-}2a b {-$-}3 $n 640 operator
778: M r{-$-}1{-$-}2a c {-$-}4 $n 640 operator
1.29 todd 779: n=Add($n, 2)
1.1 todd 780: M {-$-}1{-$-}2c b {-$-}3 $n 640 operator
781: M r{-$-}1{-$-}2c c {-$-}4 $n 640 operator
782: }
783:
784: # M name b/c major minor [mode] [group]
785: RMlist="rm -f"
786: MKlist=":"
1.26 deraadt 787:
1.1 todd 788: mkl() {
789: dnl
790: dnl uncomment if multi mknod happens
791: dnl
1.29 todd 792: ifelse(1, 0,
1.1 todd 793: [ "${mklist[{-$-}1]}" ] && mklist[{-$-}1]="${mklist[{-$-}1]} {-$-}2 {-$-}3 {-$-}4 {-$-}5" || {
1.30 todd 794: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
795: modes="$modes {-$-}1"
1.1 todd 796: },
797: dnl
798: dnl non multi mknod
799: dnl
1.26 deraadt 800: [ "${mklist[{-$-}1]}" ] && {
801: mklist[{-$-}1]="${mklist[{-$-}1]};mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
802: } || {
803: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
804: modes="$modes {-$-}1"
805: })
1.1 todd 806: }
1.26 deraadt 807:
1.1 todd 808: M() {
809: RMlist="$RMlist {-$-}1"
810: mkl ${5-666} {-$-}1 {-$-}2 {-$-}3 {-$-}4
811: mklist="$mklist {-$-}1"
812: G={-$-}{6:-wheel}
813: [ "{-$-}7" ] && {
814: MKlist="$MKlist;chown {-$-}7.{-$-}G {-$-}1"
815: } || {
816: case $G in
817: wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;;
818: esac
819: [ "${grplist[$g]}" ] && {
820: grplist[$g]="${grplist[$g]} {-$-}1"
821: } || {
822: groups="$groups $g"
823: grplist[$g]="chgrp $G {-$-}1"
824: }
825: }
826: return 0
827: }
828: divert(7)dnl
829: dnl
830: dnl there is no blank line at the end of etc.arch/MAKEDEV.md files, so add one
831: dnl on the following line:
832:
833: show_devs()dnl
834: dnl
835: divert(9)dnl
836: *)
837: echo $i: unknown device
838: ;;
839: esac
840: done
841: }
842: _recurse "$@"
843: if [ "$os" = "SunOS" ]; then
844: eo=transform
845: transform() {
846: case $mode in
847: 600) mask=077;;
848: 640) mask=027;;
849: 660) mask=007;;
850: 644) mask=022;;
851: 666) mask=0;;
852: 440) mask=227;;
853: esac
854: echo `echo "$@"|sed \
1.26 deraadt 855: 's/mknod -m \([0-9]*\) /umask '$mask';mknod /;s/-m [0-9]* //g;\
856: s/operator/5/g;s/root.kmem/root.2/g;s/root\./root:/g'`
1.1 todd 857: }
858: fi
859: list="$RMlist"
860: for mode in $modes; do
861: list="$list;${mklist[$mode]}"
862: done
863: for group in $groups; do
864: list="$list;${grplist[$group]}"
865: done
866: list="$list;$MKlist"
867: if [ "$eo" = "echo" -o "$eo" = "transform" ]; then
868: $eo "$list"
869: else
870: echo "$list" | sh
871: fi
1.41 todd 872: divert(3)dnl
1.1 todd 873: dnl
1.26 deraadt 874:
1.1 todd 875: R() {
1.23 todd 876: [ "$DEBUG" ] && set -x
1.1 todd 877: for i in "$@"
878: do
879: U=`unt $i`
880: [ "$U" ] || U=0
881:
882: case $i in
883: dnl