Annotation of src/etc/MAKEDEV.mi, Revision 1.54
1.1 todd 1: include(MAKEDEV.sub)dnl
2: dnl
1.54 ! miod 3: vers(a, {-$OpenBSD: MAKEDEV.mi,v 1.53 2002/12/05 04:30:21 kjc Exp $-})dnl
1.1 todd 4: dnl
5: divert(1)dnl
6: {-#-}
1.33 deraadt 7: {-#-} Copyright (c) 2001,2002 Todd T. Fries <todd@OpenBSD.org>
1.1 todd 8: {-#-} All rights reserved.
9: {-#-}
10: {-#-} Redistribution and use in source and binary forms, with or without
11: {-#-} modification, are permitted provided that the following conditions
12: {-#-} are met:
13: {-#-} 1. Redistributions of source code must retain the above copyright
14: {-#-} notice, this list of conditions and the following disclaimer.
15: {-#-} 2. The name of the author may not be used to endorse or promote products
16: {-#-} derived from this software without specific prior written permission.
17: {-#-}
18: {-#-} THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
19: {-#-} INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
20: {-#-} AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
21: {-#-} THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
22: {-#-} EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
23: {-#-} PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
24: {-#-} OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
25: {-#-} WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
26: {-#-} OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
27: {-#-} ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28: {-#-}
29: dnl
30: dnl Diversions: (upon termination, concatenated output queues)
31: dnl
32: dnl 0 - very top
33: dnl 1 - descriptions of devices
34: dnl 2 - init of script, function definitions, etc
35: dnl 3 - beginning of global recursive R() function
36: dnl 7 - body of MAKEDEV, device creations, etc
37: dnl 9 - end
38: dnl
39: dnl HOW TO ADD A DEVICE:
40: dnl
41: dnl In this file, you must use at least two macros:
42: dnl
1.29 todd 43: dnl Use '__devitem(uniqueid, name-pattern, description)' to create an entry
1.1 todd 44: dnl in the description at the top of the generated MAKEDEV file:
45: dnl
1.29 todd 46: dnl __devitem(sca, sca*, Sugar Generic device)dnl
1.41 todd 47: dnl __devitem(cry, crypto, hardware crypto access driver)dnl
1.1 todd 48: dnl
49: dnl This is ultimately shown as:
50: dnl
51: dnl # sca* Sugar Generic device
1.41 todd 52: dnl # crypto hardware crypto access driver
1.1 todd 53: dnl
1.29 todd 54: dnl Use '_mkdev(uniqueid, shell-pattern, {-shell-script-})dnl' to create
1.1 todd 55: dnl a shell script fragment used to 'create' the device (be sure to match
56: dnl the uniqueid from above):
57: dnl
1.29 todd 58: dnl _mkdev(sca, sca*, {-M sca$U c major_sca_c $U
59: dnl M rsca$U b major_sca_b Add($U, 128)-})dnl
1.41 todd 60: dnl _mkdev(cry, crypto, {-M crypto c major_cry_c 0-})dnl
1.1 todd 61: dnl
62: dnl This is ultimately expanded into:
63: dnl
1.41 todd 64: dnl sca*)
65: dnl M sca$U c 24 $U
66: dnl M sca$U b 42 $(($U+128))
67: dnl ;;
68: dnl
69: dnl crypto)
70: dnl M crypto c 47 0
71: dnl ;;
1.1 todd 72: dnl
1.29 todd 73: dnl In the MAKEDEV.md file, add a '_DEV(uniqueid, charmajor, blockmajor)'
1.1 todd 74: dnl entry:
75: dnl
1.29 todd 76: dnl _DEV(sca, 24, 42)
1.41 todd 77: dnl _DEV(cry, 47)
1.1 todd 78: dnl
1.41 todd 79: dnl Final step is to use the 'target/twrget' macros to have the 'all)' target
80: dnl generate one or more device(s). Usage of 'target/twrget' is:
81: dnl target(target_name, device_name [, append_string ] .. )
82: dnl twrget(target_name, uniqueid, device_name, [, append_string ] .. )
1.1 todd 83: dnl
1.41 todd 84: dnl target_name a unique name that later is used as an argument to
85: dnl 'show_target()' (which expands all devices for a
86: dnl given 'target_name').
87: dnl uniqueid same as 'uniqueid' above
88: dnl device_name string representing the device to be mknod'ed
89: dnl append_string for each append_string, `device_name' is prepended
90: dnl
91: dnl Note: 'target(a,b,c)' is equivalent to 'twrget(a,b,b,c)'
92: dnl
93: dnl
94: dnl For a short example:
95: dnl
96: dnl target(all, std)dnl
97: dnl target(all, sca, 0, 1, 2, 3)dnl
98: dnl twrget(all, cry, crypto)dnl
1.1 todd 99: dnl
100: dnl would expand to:
101: dnl
102: dnl all)
1.41 todd 103: dnl R std sca0 sca1 sca2 sca3 crypto
1.1 todd 104: dnl ;;
105: dnl
1.41 todd 106: dnl presuming '_DEV(sca, ?, ?)' and '_DEV(std)' were in the MAKEDEV.md file.
1.1 todd 107: dnl
108: dnl
109: dnl Everything is 'automatically' added to 'MAKEDEV' based on whether or
110: dnl not the '_DEV()' entry has a corresponding _mkdev() and __devitem()
1.41 todd 111: dnl entry in MAKEDEV.mi (this file).
1.1 todd 112: dnl
113: dnl Note: be very wary of adding whitespace, carriage returns, or not
114: dnl finishing a macro with ')dnl' .. otherwise, extra blank lines show up
115: dnl in the output.
116: dnl
1.31 todd 117: dnl TODO:
118: dnl
119: dnl make a 'disktgt' macro that automatically does:
1.34 deraadt 120: dnl disktgt(rd, {-rd-})
1.31 todd 121: dnl
122: dnl target(all,rd,0)
123: dnl target(ramd,rd,0)
124: dnl disk_q(rd)
1.34 deraadt 125: dnl __devitem(rd, {-rd*-}, {-rd-})dnl
1.31 todd 126: dnl
1.41 todd 127: dnl Note: not all disks are generated in 'all)'. (e.g. vax has a lot of
128: dnl disks that are not generated by 'all)')
129: dnl
1.31 todd 130: dnl
1.29 todd 131: _mkdev(loc, local, {-test -s $T.local && sh $T.local-})dnl
1.1 todd 132: dnl
1.29 todd 133: __devtitle(make, Device "make" file. Valid arguments)dnl
134: __devitem({-all-}, {-all-},
1.4 todd 135: {-makes all known devices{-,-} including local devices.
1.1 todd 136: {-#-} Tries to make the ``standard'' number of each type.-})dnl
137: dnl
138: dnl
1.29 todd 139: target(all, mcd, 0)dnl
140: twrget(all, fdesc, fd)dnl
141: target(all, st, 0, 1)dnl
142: target(all, std)dnl
143: target(all, raid, 0, 1, 2, 3)dnl
144: target(all, rz, 0, 1, 2, 3, 4)dnl
145: target(all, hp, 0, 1, 2, 3)dnl
146: target(all, ra, 0, 1, 2, 3)dnl
147: target(all, rx, 0, 1)dnl
148: target(all, wd, 0, 1, 2, 3)dnl
149: target(all, xd, 0, 1, 2, 3)dnl
150: twrget(all, aflo, fd, 0, 1, 2, 3)dnl
1.46 provos 151: target(all, systrace)dnl
1.29 todd 152: target(all, pctr)dnl
153: target(all, pctr0)dnl
154: target(all, pf)dnl
155: twrget(all, cry, crypto)dnl
156: target(all, apm)dnl
157: twrget(all, tth, ttyh, 0, 1)dnl
158: target(all, ttyA, 0, 1)dnl
159: target(all, ttyB, 0, 1, 2, 3, 4, 5)dnl
1.40 deraadt 160: twrget(all, attyB, ttyB, 0, 1, 2, 3, 4)dnl
1.29 todd 161: target(all, tty0, 0, 1, 2, 3)dnl
162: twrget(all, mac_tty0, tty0, 0, 1)dnl
163: twrget(all, tzs, tty, a, b, c, d)dnl
164: twrget(all, czs, cua, a, b, c, d)dnl
165: target(all, ttyc, 0, 1, 2, 3, 4, 5, 6, 7)dnl
166: twrget(all, com, tty0, 0, 1, 2, 3)dnl
167: twrget(all, mac_ttye, ttye, 0)dnl
168: target(all, ttye, 0, 1, 2, 3, 4, 5, 6)dnl
169: target(all, lkm)dnl
170: twrget(all, mmcl, mmclock)dnl
171: target(all, lpt, 0, 1, 2)dnl
172: twrget(all, lpt, lpa, 0, 1, 2)dnl
173: target(all, joy, 0, 1)dnl
1.41 todd 174: twrget(all, rnd, random)dnl
1.29 todd 175: target(all, uk, 0)dnl
176: target(all, wt, 0)dnl
177: target(all, wdt, 0)dnl
178: twrget(all, au, audio, 0)dnl
179: twrget(all, speak, speaker)dnl
180: target(all, asc, 0)dnl
181: target(all, music, 0)dnl
182: target(all, radio, 0)dnl
183: target(all, tuner, 0)dnl
184: target(all, rmidi, 0, 1, 2, 3, 4, 5, 6, 7)dnl
185: target(all, usbs)dnl
186: target(all, adb)dnl
187: target(all, iop, 0, 1)dnl
188: target(all, pci)dnl
189: twrget(all, wsmouse, wscons)dnl
190: twrget(all, btw, bwtwo, 0)dnl
191: twrget(all, ctw, cgtwo, 0)dnl
192: twrget(all, ctr, cgthree, 0)dnl
193: twrget(all, cfr, cgfour, 0)dnl
194: twrget(all, csx, cgsix, 0)dnl
195: twrget(all, ceg, cgeight, 0)dnl
196: twrget(all, cfo, cgfourteen, 0)dnl
197: target(all, tcx, 0)dnl
1.40 deraadt 198: twrget(all, grf_mac, grf, 0, 1, 2, 3)dnl
1.29 todd 199: target(all, par, 0)dnl
200: twrget(all, amouse, mouse, 0, 1)dnl
201: twrget(all, akbd, kbd)dnl
202: target(all, apci, 0)dnl
203: target(all, ppi, 0)dnl
204: target(all, view0, 0, 1, 2, 3, 4, 5)dnl
205: target(all, local)dnl
1.49 fgsch 206: target(all, gpr, 0)dnl
1.18 todd 207: dnl
1.29 todd 208: _mkdev(all, {-all-}, {-dnl
1.18 todd 209: show_target(all)dnl
210: -})dnl
211: dnl
1.34 deraadt 212: __devitem(ramdisk, ramdisk, devices to be put on ramdisk-based media)dnl
1.29 todd 213: __devitem(std, {-std-}, standard devices)dnl
1.1 todd 214: dnl
1.18 todd 215: dnl
216: dnl
1.1 todd 217: dnl _std
218: dnl
219: dnl $1: tty
220: dnl $2: memstuff
221: dnl $3: ksyms
222: dnl $4: drum
223: dnl $5: klog
224: dnl
1.29 todd 225: define({-_std-}, {-dnl
1.1 todd 226: std)
227: M console c 0 0 600
228: M tty c $1 0
229: M mem c $2 0 640 kmem
230: M kmem c $2 1 640 kmem
231: M null c $2 2
232: M zero c $2 12
233: M stdin c major_fdesc_c 0
234: M stdout c major_fdesc_c 1
235: M stderr c major_fdesc_c 2
236: M ksyms c $3 0 640 kmem
237: M drum c $4 0 640 kmem
238: M klog c $5 0 600-})dnl
239: dnl
1.29 todd 240: target(usb, usb, 0, 1)dnl
241: target(usb, urio, 0)dnl
242: twrget(usb, uscan, uscanner, 0)dnl
243: target(usb, uhid, 0, 1, 2, 3)dnl
244: target(usb, ulpt, 0, 1)dnl
245: target(usb, ugen, 0, 1)dnl
246: target(usb, utty, 0, 1)dnl
1.18 todd 247: dnl
1.29 todd 248: __devitem({-usbs-}, usbs, make USB devices)dnl
249: _mkdev(usbs, usbs, {-dnl
1.18 todd 250: show_target({-usb-})dnl
251: -})dnl
1.29 todd 252: __devtitle(tap, Tapes)dnl
253: __devitem(wt, {-wt* -}, QIC-interface (e.g. not SCSI) 3M cartridge tape)dnl
254: _mkdev(wt, wt*,
1.1 todd 255: {-name=wt
1.29 todd 256: n=Mult($U, 8) m=Add($n, 4)
1.1 todd 257: M $name$U b major_wt_b $n 640 operator
258: M r$name$U c major_wt_c $n 640 operator
259: M n$name$U b major_wt_b $m 640 operator
260: M nr$name$U c major_wt_c $m 640 operator-})dnl
1.29 todd 261: __devitem(tz, tz*, {-SCSI tapes{-,-} DEC TK50 cartridge tape-})dnl
262: __devitem(st, {-st*-}, SCSI tapes)dnl
263: _mkdev(st, st*, {-n=Mult($U, 16)
1.1 todd 264: for pre in " " n e en
265: do
266: M ${pre}st$U b major_st_b $n 660 operator
267: M ${pre}rst$U c major_st_c $n 660 operator
1.29 todd 268: n=Add($n, 1)
1.1 todd 269: done-})dnl
1.29 todd 270: __devitem(ct, ct*, HP300 HP-IB cartridge tape)dnl
271: __devitem(mt, mt*, (Magnetic) 9-track reel tape)dnl
272: __devitem(ht, ht*, massbus tm03 & tu??)dnl
273: __devitem(tm, tm*, unibus tm11 & te10 emulations (e.g. Emulex tc-11))dnl
274: __devitem(ts, ts*, unibus ts11)dnl
275: __devitem(ut, ut*, unibus tu45 emulations (e.g.si 9700))dnl
276: __devtitle(dis, Disks)dnl
277: __devitem(rz, rz*, SCSI disks)dnl
1.31 todd 278: __devitem(sd, {-sd*-}, {-SCSI disks, includes flopticals-})dnl
1.29 todd 279: __devitem(hd, {-hd*-}, HP300 HP-IB disks)dnl
280: __devitem(cd, {-cd*-}, SCSI cdrom drives)dnl
281: __devitem(acd, acd*, ATAPI cdrom drives)dnl
282: _mkdev(cd, cd*, {-dodisk2 cd $U major_cd_b major_cd_c $U 0{--}ifstep(cd)-})dnl
283: __devitem(mcd, mcd*, Mitsumi cdrom drives)dnl
284: _mkdev(mcd, mcd*, {-dodisk2 mcd $U major_mcd_b major_mcd_c $U 0{--}ifstep(mcd)dnl
285: -})dnl
286: __devitem(ch, {-ch*-}, SCSI media changer)dnl
287: _mcdev(ch, ch*, ch, {-major_ch_c-}, 660, operator)dnl
288: __devitem(uk, uk*, SCSI Unknown device)dnl
289: _mcdev(uk, uk*, uk, {-major_uk_c-}, 640, operator)dnl
290: __devitem(ss, ss*, SCSI scanners)dnl
1.31 todd 291: _mkdev(ss, ss*, {-M ss$U c major_ss_c Mult($U,16) 640 operator
292: M nss$U c major_ss_c Add(Mult($U,16),1) 640 operator
293: M enss$U c major_ss_c Add(Mult($U,16),3) 640 operator
1.1 todd 294: RMlist="$RMlist scan$U"
295: MKlist="$MKlist;umask 77;ln -s ss$U scan$U"-})dnl
1.29 todd 296: __devitem(ses, ses*, SES/SAF-TE SCSI devices)dnl
297: _mkdev(ses, ses*, {-M ses$U c major_ses_c $U 640 operator-})dnl
298: __devitem(ramd, ramdisk, makes all devices for a ramdisk kernel)dnl arc
299: _mkdev(ramd, ramdisk, {-dnl
1.20 todd 300: show_target(ramd)dnl
1.29 todd 301: -})dnl
302: target(ramd, std)dnl
303: target(ramd, random)dnl
304: target(ramd, bpf, 0)dnl
1.34 deraadt 305: __devitem(rd, {-rd*-}, "rd" pseudo-disks)dnl
1.29 todd 306: _mkdev(rd, rd*, {-dodisk2 rd $U major_rd_b major_rd_c $U 0{--}ifstep(rd)-})dnl
307: __devitem(xd, xd*, Xylogic 753/7053 disks)dnl
308: __devitem(xy, xy*, {- Xylogic 450/451 disks-})dnl
309: __devitem(flo, {-fd*-}, {-Floppy disk drives (3 1/2"{-,-} 5 1/4")-})dnl
310: _mkdev(flo, fd*,
1.1 todd 311: {-typnam=$U${i#fd[01]*}
312: case $typnam in
313: 0|1) typnum=0;; # no type specified, assume A
1.26 deraadt 314: *A) typnum=0; typnam=0;;
315: *B) typnum=1;;
316: *C) typnum=2;;
317: *D) typnum=3;;
318: *E) typnum=4;;
319: *F) typnum=5;;
320: *G) typnum=6;;
321: *H) typnum=7;;
322: *) echo bad type $typnam for $i; exit 1;;
1.1 todd 323: esac
324: case $U in
325: 0|1) blk=major_flo_b; chr=major_flo_c;;
326: *) echo bad unit $U for $i; exit 1;;
327: esac
328: nam=fd${typnam}
1.29 todd 329: n=Add(Mult($U, 128), Mult($typnum, 16))
1.1 todd 330: M ${nam}a b $blk $n 640 operator
1.29 todd 331: M ${nam}b b $blk Add($n, 1) 640 operator
332: M ${nam}c b $blk Add($n, 2) 640 operator
1.1 todd 333: M r${nam}a c $chr $n 640 operator
1.29 todd 334: M r${nam}b c $chr Add($n, 1) 640 operator
335: M r${nam}c c $chr Add($n, 2) 640 operator-}, 664)dnl
336: __devitem(aflo, ramdisk, devices needed for install floppies)dnl
337: _mkdev(aflo, fd*, {-case $U in 0|1|2|3)
338: M fd${U}a b major_aflo_b Mult($U, 16) 640 operator
339: M fd${U}b b major_aflo_b Add(Mult($U, 16), 1) 640 operator
340: M rfd${U}a c major_aflo_c Mult($U, 16) 640 operator
341: M rfd${U}b c major_aflo_c Add(Mult($U, 16), 1) 640 operator;;
1.1 todd 342: *) echo bad unit for floppy disk in: $i;;
343: esac-})dnl
1.29 todd 344: __devitem(iop, iop*, I2O controller device)dnl
345: _mcdev(iop, iop*, iop, {-major_iop_c-}, 660)dnl
346: __devitem(wdt, wdt0, watchdog timer)dnl
347: _mcdev(wdt, wdt0, wdt, {-major_wdt_c-}, 440, operator)dnl
348: __devitem(local, local, configuration specific devices)dnl
349: __devitem(wd, {-wd*-}, {-"winchester" disk drives (ST506, IDE, ESDI, RLL, ...)-})dnl
350: __devitem(ccd, ccd*, concatenated disk devices)dnl
351: __devitem(raid, raid*, RAIDframe disk devices)dnl
352: __devitem(vnd, vnd*, "file" pseudo-disks)dnl
353: _mkdev(vnd, vnd*, {-dodisk vnd $U major_vnd_b major_vnd_c $U 0{--}ifstep(vnd)
1.6 todd 354: dodisk svnd $U major_vnd_b major_vnd_c $U 128{--}ifstep(vnd)-})dnl
1.29 todd 355: __devitem(ra, ra*, {-MSCP disks (ra??, hd??)-})dnl
356: __devitem(hp, hp*, {-massbuss rm??-})dnl
357: __devitem(hk, hk*, {-unibus rk06 and rk07-})dnl
358: __devitem(up, up*, {-other unibus devices (e.g. on Emulex sc-21v controller)-})dnl
359: __devitem(rb, rb*, {-730 idc w/ rb80 and/or rb02-})dnl
360: __devitem(rx, rx*, {-MSCP floppy disk (rx33/50/...)-})dnl
361: __devitem(rl, rl*, {-unibus r102-})dnl
362: __devitem(hd, hd*, {-HDC9224 hd disks on VS2000-})dnl
1.1 todd 363: dnl
364: dnl For normal disk devices, add a disk_q entry; anything else define like
365: dnl the rest (such as vnd above).
366: dnl
1.18 todd 367: disk_q({-ccd-})dnl
368: disk_q({-hd-})dnl
369: disk_q({-hk-})dnl
370: disk_q({-hp-})dnl
371: disk_q({-ra-})dnl
372: disk_q({-raid-})dnl
373: disk_q({-rb-})dnl
374: disk_q({-rl-})dnl
375: disk_q({-rx-})dnl
376: disk_q({-sd-})dnl
1.1 todd 377: disk_q({-xy-})dnl
378: disk_q({-xd-})dnl
1.18 todd 379: disk_q({-up-})dnl
380: disk_q({-wd-})dnl
1.1 todd 381: disk_q({-rz-})dnl
382: dnl
1.29 todd 383: __devitem(loc, local, configuration specific devices)dnl
384: _mkdev(loc, local, {-test -s $T.local && sh $T.local-})dnl
385: _mkdev({-disks-}, {-undefine({-C_ase-})show_disks()undefine({-C_ase-})-},
1.1 todd 386: {-case $i in
387: show_disks2()dnl
1.6 todd 388: esac-})dnl
1.1 todd 389: __mkdev({-disks-}){--}dnl
390: dnl
1.29 todd 391: __devtitle(cons, Console ports)dnl
392: __devitem(ttyv0, ttyv0, pccons or pcvt screen 0)dnl
393: __devitem(ttyv, ttyv*, pcvt)dnl
394: __devitem(ttye, ttye*, ite bitmapped consoles)dnl
395: __devitem(mac_ttye, ttye*, ite bitmapped consoles)dnl
396: __devitem(wscons, ttyC0, wscons screen 0)dnl
1.35 todd 397: twrget(wscons, wscons, ttyC, cfg, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b)dnl
398: target(wscons, wsmux)dnl
399: target(wscons, wskbd, 0, 1, 2, 3)dnl
400: target(wscons, wsmouse, 0, 1, 2, 3)dnl
1.29 todd 401: _mkdev({-wscons-}, {-wscons-}, {-dnl
1.35 todd 402: show_target(wscons)dnl
403: -})dnl
1.36 todd 404: __devitem(wsdisp, ttyC-F*, wscons virtual consoles)dnl
1.35 todd 405: _mkdev({-wsdisp-}, tty[C-F]*, {-U=${i##tty[C-F]}
406: case $i in
407: ttyC*) n=C m=expr(0*256);;
408: ttyD*) n=D m=expr(1*256);;
409: ttyE*) n=E m=expr(2*256);;
410: ttyF*) n=F m=expr(3*256);;
411: esac
1.3 todd 412: case $U in
1.35 todd 413: [0-9a-f]) M tty$n$U c major_wsdisp_c {-$(( 16#$U + $m ))-} 600;;
414: cfg) M tty${n}cfg c major_wsdisp_c Add(255,$m) 600;;
1.3 todd 415: *) echo bad unit $U for $i; exit 1;;
1.6 todd 416: esac-})dnl
1.29 todd 417: __devitem(wskbd, wskbd*, wscons keyboards)dnl
418: _mkdev(wskbd, wskbd*, {-M wskbd$U c major_wskbd_c $U 600-})dnl
419: __devitem(wsmux, wsmux, wscons keyboard/mouse mux devices)dnl
420: _mkdev(wsmux, wsmux|wsmouse|wskbd, {-M wsmouse c major_wsmux_c 0 600
1.1 todd 421: M wskbd c major_wsmux_c 1 600-})dnl
1.29 todd 422: __devitem(pcons, console, PROM console)dnl
423: __devtitle(point, Pointing devices)dnl
424: __devitem(wsmouse, wsmouse*, wscons mice)dnl
425: _mkdev(wsmouse, wsmouse*, {-M wsmouse$U c major_wsmouse_c $U 600-})dnl
426: __devitem(quad, quadmouse, "quadrature mouse")dnl
427: __devtitle(pty, Pseudo terminals)dnl
428: __devitem(tty, tty*, set of 16 slave psuedo terminals)dnl
429: __devitem(pty, pty*, set of 16 master pseudo terminals)dnl
1.31 todd 430: _mkdev(pty, pty*, {-if [ $U -gt 15 ]; then
431: echo bad unit for pty in: $i
432: continue
433: fi
434: set -A tbl p q r s t u v w x y z P Q R S T
435: name=${tbl[$U]}
1.1 todd 436: n=0
437: while [ $n -lt 16 ]
438: do
439: nam=$name$(hex $n)
1.31 todd 440: off=Mult($U, 16)
1.29 todd 441: M tty$nam c major_tty_c Add($off, $n)
442: M pty$nam c major_pty_c Add($off, $n)
443: n=Add($n, 1)
1.1 todd 444: done-})dnl
1.29 todd 445: __devitem(dc, dc*, {-4 channel serial interface (keyboard{-,-} mouse{-,-}modem{-,-} printer)-})dnl
446: __devtitle(prn, Printers)dnl
447: __devitem(par, par*, motherboard parallel port)dnl
448: __devitem(lpt, lpt*, IEEE 1284 centronics printer)dnl
449: _mkdev(lpt, lpt*|lpa*,
1.1 todd 450: {-case $i in
451: lpt*) n=lpt f=0;;
452: lpa*) n=lpa f=128;;
453: esac
1.29 todd 454: M $n$U c major_lpt_c Add($U, $f) 600-})dnl
455: __devitem(lpa, lpa*, interruptless lp)dnl
456: __devitem(ppi, ppi*, HP-IB plotters)dnl
457: __devtitle({-usb-}, USB devices)dnl
458: __devitem({-usb-}, usb*, Bus control devices used by usbd for attach/detach)dnl
459: _mkdev({-usb-}, usb*, {-[ "$i" = "usb" ] && u= || u=$U
1.1 todd 460: M usb$u c major_usb_c $U 660-})dnl
1.29 todd 461: __devitem(uhid, uhid*, Generic HID devices)dnl
462: _mcdev({-uhid-}, uhid*, {-uhid-}, {-major_uhid_c-}, 660)dnl
463: __devitem(ulpt, ulpt*, Printer devices)dnl
464: _mcdev({-ulpt-}, ulpt*, {-ulpt-}, {-major_ulpt_c-}, 660)dnl
465: __devitem(utty, utty*, Serial ports)dnl
466: _mcdev({-utty-}, utty*, {-utty-}, {-major_utty_c-}, 660)dnl
467: __devitem(urio, urio*, Diamond Multimedia Rio 500)dnl
468: _mcdev({-urio-}, urio*, {-urio-}, {-major_urio_c-}, 660)dnl
469: __devitem(uscan, uscanner*, Scanners)dnl
470: _mcdev({-uscan-}, uscanner*, {-uscanner-}, {-major_uscan_c-}, 660)dnl
471: __devitem(ugen, ugen*, Generic device)dnl
472: _mkdev(ugen, ugen*, {-n=Mult($U, 16)
1.1 todd 473: for j in 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
474: do
1.29 todd 475: M ugen$U.$j c major_ugen_c Add($n, $j) 660
1.1 todd 476: done-})dnl
1.29 todd 477: __devtitle(cpu, Cpus)dnl
478: __devitem(cpu, cpu*, cpus)dnl
479: __devtitle(call, Call units)dnl
480: __devtitle(term, Terminal ports)dnl
481: __devtitle(termp, Terminal multiplexers)dnl
482: __devitem(dca, dca*, HP200/300 single port serial interface)dnl
483: __devitem(dcm, dcm*, HP200/300 4 port serial mux interface)dnl
484: __devitem(apci, apci*, HP400 4 port serial mux interface)dnl
485: __devitem({-com-}, {-tty0*-}, NS16x50 serial ports)dnl
486: _mkdev(com, {-tty0*-}, {-M tty$U c major_com_c $U 660 dialer uucp
487: M cua$U c major_com_c Add($U, 128) 660 dialer uucp-})dnl
488: __devitem(ttyc, ttyc*, Cyclades serial ports)dnl
489: __devitem(tzs, tty[a-z]*, Zilog 8530 Serial Port)dnl
490: _mkdev(tzs, {-tty[a-z]-}, {-u=${i#tty*}
1.1 todd 491: case $u in
492: a) n=0 ;;
493: b) n=1 ;;
494: c) n=4 ;;
495: d) n=5 ;;
496: *) echo unknown tty device $i ;;
497: esac
498: M tty$u c major_tzs_c $n 660 dialer uucp-})dnl
1.29 todd 499: __devitem(tth, ttyh*, Sab82532 serial devices)dnl
500: _mkdev(tth, ttyh*, {-M ttyh$U c major_tth_c $U 660 dialer uucp-})dnl
501: __devitem(czs, cua[a-z]*, Zilog 8530 Serial Port)dnl
502: _mkdev(czs, cua[a-z], {-u=${i#cua*}
1.1 todd 503: case $u in
504: a) n=0 ;;
505: b) n=1 ;;
506: c) n=4 ;;
507: d) n=5 ;;
1.41 todd 508: *) echo unknown cua device $i ;;
1.1 todd 509: esac
1.29 todd 510: M cua$u c major_czs_c Add($n, 128) 660 dialer uucp-})dnl
511: __devitem(arm_tty, tty*, {-alias for PC COM ports{-,-} this is what the system really wants-})dnl
512: __devitem(tty0, tty00, standard serial port)dnl
513: __devitem(mac_tty0, tty00, standard serial port)dnl
514: __devitem(ttyA, ttyA*, mfc serial ports)dnl
515: __devitem(ttyz, tty[a-d], onboard zs serial ports)dnl
516: __devitem(cuaz, cua[a-d], onboard zs serial ports)dnl
517: __devitem(ttyB, ttyB?, DEC 3000 ZS8530 ("scc") serial ports)dnl
518: __devitem(scc, scc*, 82530 serial interface)dnl
519: __devitem(arc_ttyC, ttyC0, pccons)dnl
520: __devitem(i386_ttyC, ttyC*, pcvt)dnl
521: __devitem(ttyC, ttyC?, {-AlphaStation NS16550 ("com serial ports")-})dnl
522: __devitem(ttyE, ttyE?, Workstation console (framebuffer & keyboard) tty emulators)dnl
523: __devitem(ser02, ser02, {-serial2 port (channel A on 8530)-})dnl
524: __devitem(mdm02, mdm02, {-modem2 port (channel B on 8530)-})dnl
525: __devtitle(spec, Special purpose devices)dnl
526: __devitem(apm, apm , power management device)dnl
527: _mkdev(apm, apm*, {-M apm c major_apm_c 0 644
1.1 todd 528: M apmctl c major_apm_c 8 644-})dnl
1.29 todd 529: __devitem(pcmcia, pcmcia*, PCMCIA card drivers)dnl
530: __devitem(pctr, pctr*, PC Performance Tuning Register access device)dnl
531: _mkdev(pctr, pctr, {-M pctr c major_pctr_c 0 644-})dnl
1.46 provos 532: __devitem(systrace, systrace*, system call tracing device)dnl
533: _mkdev(systrace, systrace, {-M systrace c major_systrace_c 0 644-})dnl
1.29 todd 534: __devitem(au, audio*, audio device)dnl
535: _mkdev(au, audio*, {-M sound$U c major_au_c $U
536: M mixer$U c major_au_c Add($U, 16)
537: M audio$U c major_au_c Add($U, 128)
538: M audioctl$U c major_au_c Add($U, 192)
1.1 todd 539: MKlist="$MKlist;[ -e audio ] || ln -s audio$U audio"
540: MKlist="$MKlist;[ -e mixer ] || ln -s mixer$U mixer"
541: MKlist="$MKlist;[ -e sound ] || ln -s sound$U sound"
542: MKlist="$MKlist;[ -e audioctl ] || ln -s audioctl$U audioctl"-})dnl
1.29 todd 543: __devitem(asc, asc*, ASC Audio device)dnl
544: _mkdev(asc, asc*, {-M asc$U major_asc_c 0-})dnl
545: __devitem(music, music*, midi devices)dnl
546: _mkdev(music, music*, {-M music$U c major_music_c $U
547: M sequencer$U c major_music_c Add($U, 128)
1.1 todd 548: MKlist="$MKlist;[ -e music ] || ln -s music$U music"
549: MKlist="$MKlist;[ -e sequencer ] || ln -s sequencer$U sequencer"-})dnl
1.29 todd 550: __devitem(radio, radio*, FM tuner device)dnl
551: _mkdev(radio, radio*, {-M radio$U c major_radio_c $U
1.8 todd 552: MKlist="$MKlist;[ -e radio ] || ln -s radio$U radio"-})dnl
1.29 todd 553: __devitem(fdesc, fd, makes fd/* for the fdescfs)dnl
554: _mkdev(fdesc, fd, {-RMlist="mkdir -p fd;$RMlist" n=0
555: while [ $n -lt 64 ];do M fd/$n c major_fdesc_c $n;n=Add($n, 1);done
1.1 todd 556: MKlist="$MKlist;chmod 555 fd"-})dnl
1.29 todd 557: __devtitle(graph, Graphics devices)dnl
558: __devitem(grf_mac, grf*, {-custom chip (grf0){-,-} Retina Z2/Z3 (grf1/grf2){-,-}
1.1 todd 559: {-#-} Cirrus boards (grf3){-,-} A2410 (grf4) video or
560: {-#-} CyberVision 64 (grf5)-})dnl
1.29 todd 561: __devitem(ite, ite*, terminal emulator interface to HP300 graphics devices)dnl
562: __devitem({-hil-}, {-hil-}, HP300 HIL input devices)dnl
563: __devitem(oppr, openprom)dnl
564: _cdev(oppr, openprom, 70, 0)dnl
565: __devitem(btw, bwtwo*)dnl
566: _mcdev(btw, bwtwo*, bwtwo, {-major_btw_c-}, 666)dnl
567: __devitem(ctw, cgtwo*)dnl
568: _mcdev(ctw, cgtwo*, cgtwo, {-major_ctw_c-}, 666)dnl
569: __devitem(ctr, cgthree*)dnl
570: _mcdev(ctr, cgthree*, cgthree, {-major_ctr_c-}, 666)dnl
571: __devitem(cfr, cgfour*)dnl
572: _mcdev(cfr, cgfour*, cgfour, {-major_cfr_c-}, 666)dnl
573: __devitem(csx, cgsix*)dnl
574: _mcdev(csx, cgsix*, cgsix, {-major_csx_c-}, 666)dnl
575: __devitem(ceg, cgeight*)dnl
576: _mcdev(ceg, cgeight*, cgeight, {-major_ceg_c-}, 666)dnl
577: __devitem(cfo, cgfourteen*)dnl
578: _mcdev(cfo, cgfourteen*, cgfourteen, {-major_cfo_c-})dnl
579: __devitem(tcx, tcx*)dnl
580: _mcdev(tcx, tcx*, tcx, {-major_tcx_c-})dnl
581: __devitem(cry, crypto, hardware crypto access driver)dnl
582: _mkdev(cry, crypto, {-M crypto c major_cry_c-} 0)dnl
583: __devitem(pf, pf*, Packet Filter)dnl
584: _mkdev(pf, {-pf*-}, {-M pf c major_pf_c 0 600-})dnl
585: __devitem(bpf, bpf*, Berkeley Packet Filter)dnl
586: _mkdev(bpf, {-bpf*-}, {-M bpf$U c major_bpf_c $U 600-}, 600)dnl
587: _mkdev(tun, {-tun*-}, {-M tun$U c major_tun_c $U 600-}, 600)dnl
588: __devitem(speak, speaker, pc speaker)dnl
589: _mkdev(speak, speaker, {-M speaker c major_speak_c 0 600-})dnl
590: __devitem(kbd, kbd, keyboard (provides events, for X11))dnl
591: _cdev(kbd, kbd, {-major_kbd_c-}, 0, 600)dnl
592: __devitem(kbd_atari, kbd, Atari keyboard)dnl
593: __devitem(akbd, kbd, Amiga keyboard)dnl
594: __devitem(rkbd, kbd, raw keyboard)dnl
595: __devitem(kbdctl, kbdctl, keyboard control)dnl
596: __devitem(beep, beep, riscpc speaker)dnl
597: __devitem(iic, iic*, IIC bus device)dnl
598: __devitem(rtc, rtc*, RTC device)dnl
599: __devitem(view, view*, generic interface to graphic displays)dnl
600: __devitem(aconf, aconf, {-autoconfig information (not yet)-})dnl
601: __devitem(mouse-, mouse-*, "mouse link")dnl
602: __devitem(mouse, mouse, mouse (provides events, for X11))dnl
603: __devitem(amouse, mouse*, Amiga mice)dnl
604: __devitem(lkm, lkm, loadable kernel modules interface)dnl
605: _cdev(lkm, lkm, {-major_lkm_c-}, 0, 640, kmem)dnl
606: __devitem(mmcl, mmclock, memory mapped clock)dnl
607: __devitem(tun, tun*, network tunnel driver)dnl
608: __devitem(rnd, *random, inkernel random data source)dnl
609: _mkdev(rnd, *random, {-n=0
1.1 todd 610: for pre in " " s u p a
611: do
612: M ${pre}random c major_rnd_c $n 644
1.29 todd 613: n=Add($n, 1)
614: done-}, 644)dnl
615: __devitem(joy, joy*, joystick driver)dnl
616: _mcdev(joy, joy*, joy, {-major_joy_c-}, 666)dnl
617: __devitem(mag, magma*, magma card (makes 16 tty and 2 bpp))dnl
618: __devitem(bppmag, bppmag[mno], magma parallel port device)dnl
619: __devitem(spif, spif*, spif card (makes 8 tty and 1 bpp))dnl
620: __devitem(bppsp, bpp[jkl], spif parallel port device)dnl
621: _mkdev(mag, magma*, {-case $U in
1.18 todd 622: 0) offset=0 nam=m;;
623: 1) offset=16 nam=n;;
624: 2) offset=32 nam=o;;
625: *) echo "bad unit for $i: $U"; exit 127;;
626: esac
1.29 todd 627: offset=Mult($U, 64)
1.18 todd 628: n=0
629: while [ $n -lt 16 ]
630: do
631: name=${nam}`hex $n`
1.29 todd 632: M tty$name c major_mag_c Add($offset, $n) 660 dialer uucp
633: n=Add($n, 1)
1.18 todd 634: done
1.29 todd 635: M bpp${nam}0 c major_bppmag_c Add($offset, 0) 600
636: M bpp${nam}1 c major_bppmag_c Add($offset, 1) 600-})dnl
637: _mkdev(spif, spif*, {-case $U in
1.18 todd 638: 0) offset=0 nam=j;;
639: 1) offset=16 nam=k;;
640: 2) offset=32 nam=l;;
641: *) echo "bad unit for $i: $U"; exit 127;;
642: esac
1.29 todd 643: offset=Mult($U, 64)
1.18 todd 644: n=0
645: while [ $n -lt 8 ]
646: do
647: name=${nam}`hex $n`
1.29 todd 648: M tty$name c major_spif_c Add($offset, $n) 660 dialer uucp
649: n=Add($n, 1)
1.18 todd 650: done
1.29 todd 651: M bpp${nam}0 c major_bppsp_c Add($offset, 0) 600-})dnl
652: __devitem(bpp, bpp*, parallel port devices)dnl
653: __devitem(xfs, xfs*, XFS filesystem devices)dnl
654: _mcdev(xfs, xfs*, xfs, {-major_xfs_c-}, 600)dnl
655: __devitem(hil, hil, HIL input devices)dnl
656: __devitem(rmidi, rmidi*, raw midi devices)dnl
657: _mcdev(rmidi, rmidi*, rmidi, {-major_rmidi_c-}, 666)dnl
658: __devtitle(plat, Platform-specific devices)dnl
659: __devitem(fb, fb*, framebuffer device)dnl
660: __devitem(bktr, bktr*, video capturing)dnl
661: _mcdev(bktr, bktr*, bktr, {-major_bktr_c-}, 644)dnl
662: __devitem(tuner, tuner*, tuner device)dnl
663: _mkdev(tuner, tuner*, {-M tuner$U c major_bktr_c Add(Mult($U, 2), 16) 644-}, 644)dnl
664: __devitem(pci, pci, PCI bus device)dnl
1.43 deraadt 665: _mkdev(pci, pci, {-M pci c major_pci_c 0 600-}, 600)dnl
1.29 todd 666: __devitem(adb, adb, Apple Desktop bus event interface)dnl
667: _mkdev(adb, adb, {-M adb c major_adb_c 0-})dnl
668: __devitem(pdc, pdc, PDC device)dnl
669: _mkdev(local, local, {-test -s $T.local && sh $T.local-}, 666)dnl
1.49 fgsch 670: __devitem(gpr, gpr*, gpr400 pcmcia device)dnl
671: _mcdev(gpr, gpr*, gpr, {-major_gpr_c-})dnl
1.1 todd 672: dnl
673: divert(1)dnl
674: include(etc.MACHINE/MAKEDEV.md)dnl
675: dnl
676: dnl
677: divert(0)dnl
678: #!/bin/sh -
679: #
680: # THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT.
681: # generated from:
682: #
683: show_vers()dnl <-- now that all files are included, show versions
684: #
685: dnl
686: divert(2)dnl
687: PATH=/sbin:/usr/sbin:/bin:/usr/bin
688: T=$0
689:
690: # set this to echo for Echo-Only debugging
691: [ "$eo" ] || eo=
692:
693: hex()
694: {
695: case ${--}1 in
1.26 deraadt 696: [0-9]) echo -n {-$-}1;;
697: 10) echo -n a;;
698: 11) echo -n b;;
699: 12) echo -n c;;
700: 13) echo -n d;;
701: 14) echo -n e;;
702: 15) echo -n f;;
1.1 todd 703: esac
704: }
1.26 deraadt 705:
1.1 todd 706: trunc()
707: {
708: # XXX pdksh can't seem to deal with locally scoped variables
709: # in ${foo#$bar} expansions
710: arg1="{-$-}1"
711: arg2="{-$-}2"
712: case {-$-}3 in
713: l) echo ${arg2#$arg1} ;;
714: r|*) echo ${arg1#$arg2} ;;
715: esac
716: }
1.26 deraadt 717:
1.1 todd 718: unt()
719: {
720: # XXX pdksh can't seem to deal with locally scoped variables
721: # in ${foo#$bar} expansions
722: arg="{-$-}1"
723: tmp="${arg#[a-zA-Z]*}"
724: tmp="${tmp%*[a-zA-Z]}"
725: while [ "$tmp" != "$arg" ]
726: do
727: arg=$tmp
728: tmp="${arg#[a-zA-Z]*}"
729: tmp="${tmp%*[a-zA-Z]}"
730: done
731: echo $arg
732: }
733: dnl
1.29 todd 734: dnl dodisk(name, unit, blkmaj, chrmaj, unit, off[, stepping])
1.5 todd 735: dnl arg: 1 2 3 4 5 6 7
1.1 todd 736: dnl
1.26 deraadt 737:
1.1 todd 738: dodisk()
739: {
1.27 todd 740: [ "$DEBUG" ] && set -x
1.29 todd 741: n=Add(Mult(${5}, ${7:-16}), ${6}) count=0
1.1 todd 742: RMlist="$RMlist {-$-}1{-$-}2? r{-$-}1{-$-}2?"
1.13 todd 743: [ 0$7 -ne 8 ] && l="i j k l m n o p"
744: for d in a b c d e f g h $l
1.1 todd 745: do
1.29 todd 746: M {-$-}1{-$-}2$d b {-$-}3 Add($n, $count) 640
747: M r{-$-}1{-$-}2$d c {-$-}4 Add($n, $count) 640
1.1 todd 748: let count=count+1
749: done
750: MKlist="$MKlist;chown root.operator {-$-}1{-$-}2? r{-$-}1{-$-}2?"
751: }
752: dnl
1.29 todd 753: dnl dodisk2(name, unit, blkmaj, chrmaj, unit, off[, stepping])
1.1 todd 754: dnl
755: dnl 1. name - prefix name of the device
756: dnl 2. unit - beginning unit number for block devices
757: dnl 3. blkmaj - block device major number
758: dnl 4. chrmaj - character device major number
759: dnl 5. unit - beginning unit number for character devices
760: dnl 6. off - offset from 0 for all minor numbers (see svnd for an example)
1.5 todd 761: dnl 7. step - optional, defaults to 16, number of partitions per device
1.1 todd 762: dnl
1.26 deraadt 763:
1.1 todd 764: dodisk2()
765: {
1.29 todd 766: n=Add(Mult({-$-}5, ${7:-16}), {-$-}6)
1.1 todd 767: M {-$-}1{-$-}2a b {-$-}3 $n 640 operator
768: M r{-$-}1{-$-}2a c {-$-}4 $n 640 operator
1.29 todd 769: n=Add($n, 2)
1.1 todd 770: M {-$-}1{-$-}2c b {-$-}3 $n 640 operator
771: M r{-$-}1{-$-}2c c {-$-}4 $n 640 operator
772: }
773:
774: # M name b/c major minor [mode] [group]
775: RMlist="rm -f"
776: MKlist=":"
1.26 deraadt 777:
1.1 todd 778: mkl() {
779: dnl
780: dnl uncomment if multi mknod happens
781: dnl
1.29 todd 782: ifelse(1, 0,
1.1 todd 783: [ "${mklist[{-$-}1]}" ] && mklist[{-$-}1]="${mklist[{-$-}1]} {-$-}2 {-$-}3 {-$-}4 {-$-}5" || {
1.30 todd 784: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
785: modes="$modes {-$-}1"
1.1 todd 786: },
787: dnl
788: dnl non multi mknod
789: dnl
1.26 deraadt 790: [ "${mklist[{-$-}1]}" ] && {
791: mklist[{-$-}1]="${mklist[{-$-}1]};mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
792: } || {
793: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
794: modes="$modes {-$-}1"
795: })
1.1 todd 796: }
1.26 deraadt 797:
1.1 todd 798: M() {
799: RMlist="$RMlist {-$-}1"
800: mkl ${5-666} {-$-}1 {-$-}2 {-$-}3 {-$-}4
801: mklist="$mklist {-$-}1"
802: G={-$-}{6:-wheel}
803: [ "{-$-}7" ] && {
804: MKlist="$MKlist;chown {-$-}7.{-$-}G {-$-}1"
805: } || {
806: case $G in
807: wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;;
808: esac
809: [ "${grplist[$g]}" ] && {
810: grplist[$g]="${grplist[$g]} {-$-}1"
811: } || {
812: groups="$groups $g"
813: grplist[$g]="chgrp $G {-$-}1"
814: }
815: }
816: return 0
817: }
818: divert(7)dnl
819: dnl
820: dnl there is no blank line at the end of etc.arch/MAKEDEV.md files, so add one
821: dnl on the following line:
822:
823: show_devs()dnl
824: dnl
825: divert(9)dnl
826: *)
827: echo $i: unknown device
828: ;;
829: esac
830: done
831: }
832: _recurse "$@"
833: if [ "$os" = "SunOS" ]; then
834: eo=transform
835: transform() {
836: case $mode in
837: 600) mask=077;;
838: 640) mask=027;;
839: 660) mask=007;;
840: 644) mask=022;;
841: 666) mask=0;;
842: 440) mask=227;;
843: esac
844: echo `echo "$@"|sed \
1.26 deraadt 845: 's/mknod -m \([0-9]*\) /umask '$mask';mknod /;s/-m [0-9]* //g;\
846: s/operator/5/g;s/root.kmem/root.2/g;s/root\./root:/g'`
1.1 todd 847: }
848: fi
849: list="$RMlist"
850: for mode in $modes; do
851: list="$list;${mklist[$mode]}"
852: done
853: for group in $groups; do
854: list="$list;${grplist[$group]}"
855: done
856: list="$list;$MKlist"
857: if [ "$eo" = "echo" -o "$eo" = "transform" ]; then
858: $eo "$list"
859: else
860: echo "$list" | sh
861: fi
1.41 todd 862: divert(3)dnl
1.1 todd 863: dnl
1.26 deraadt 864:
1.1 todd 865: R() {
1.23 todd 866: [ "$DEBUG" ] && set -x
1.1 todd 867: for i in "$@"
868: do
869: U=`unt $i`
870: [ "$U" ] || U=0
871:
872: case $i in
873: dnl