Annotation of src/etc/MAKEDEV.mi, Revision 1.68
1.1 todd 1: include(MAKEDEV.sub)dnl
2: dnl
1.68 ! millert 3: vers(a, {-$OpenBSD: MAKEDEV.mi,v 1.67 2004/02/05 22:22:15 todd Exp $-})dnl
1.1 todd 4: dnl
5: divert(1)dnl
6: {-#-}
1.60 todd 7: {-#-} Copyright (c) 2001,2002,2003 Todd T. Fries <todd@OpenBSD.org>
1.1 todd 8: {-#-}
1.60 todd 9: {-#-} Permission to use, copy, modify, and distribute this software for any
10: {-#-} purpose with or without fee is hereby granted, provided that the above
11: {-#-} copyright notice and this permission notice appear in all copies.
1.1 todd 12: {-#-}
1.60 todd 13: {-#-} THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
14: {-#-} WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
15: {-#-} MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
16: {-#-} ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
17: {-#-} WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
18: {-#-} ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
19: {-#-} OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
1.1 todd 20: {-#-}
21: dnl
22: dnl Diversions: (upon termination, concatenated output queues)
23: dnl
24: dnl 0 - very top
25: dnl 1 - descriptions of devices
26: dnl 2 - init of script, function definitions, etc
27: dnl 3 - beginning of global recursive R() function
28: dnl 7 - body of MAKEDEV, device creations, etc
29: dnl 9 - end
30: dnl
31: dnl HOW TO ADD A DEVICE:
32: dnl
33: dnl In this file, you must use at least two macros:
34: dnl
1.29 todd 35: dnl Use '__devitem(uniqueid, name-pattern, description)' to create an entry
1.1 todd 36: dnl in the description at the top of the generated MAKEDEV file:
37: dnl
1.29 todd 38: dnl __devitem(sca, sca*, Sugar Generic device)dnl
1.41 todd 39: dnl __devitem(cry, crypto, hardware crypto access driver)dnl
1.1 todd 40: dnl
41: dnl This is ultimately shown as:
42: dnl
43: dnl # sca* Sugar Generic device
1.41 todd 44: dnl # crypto hardware crypto access driver
1.1 todd 45: dnl
1.29 todd 46: dnl Use '_mkdev(uniqueid, shell-pattern, {-shell-script-})dnl' to create
1.1 todd 47: dnl a shell script fragment used to 'create' the device (be sure to match
48: dnl the uniqueid from above):
49: dnl
1.29 todd 50: dnl _mkdev(sca, sca*, {-M sca$U c major_sca_c $U
51: dnl M rsca$U b major_sca_b Add($U, 128)-})dnl
1.41 todd 52: dnl _mkdev(cry, crypto, {-M crypto c major_cry_c 0-})dnl
1.1 todd 53: dnl
54: dnl This is ultimately expanded into:
55: dnl
1.41 todd 56: dnl sca*)
57: dnl M sca$U c 24 $U
58: dnl M sca$U b 42 $(($U+128))
59: dnl ;;
60: dnl
61: dnl crypto)
62: dnl M crypto c 47 0
63: dnl ;;
1.1 todd 64: dnl
1.29 todd 65: dnl In the MAKEDEV.md file, add a '_DEV(uniqueid, charmajor, blockmajor)'
1.1 todd 66: dnl entry:
67: dnl
1.29 todd 68: dnl _DEV(sca, 24, 42)
1.41 todd 69: dnl _DEV(cry, 47)
1.1 todd 70: dnl
1.41 todd 71: dnl Final step is to use the 'target/twrget' macros to have the 'all)' target
72: dnl generate one or more device(s). Usage of 'target/twrget' is:
73: dnl target(target_name, device_name [, append_string ] .. )
74: dnl twrget(target_name, uniqueid, device_name, [, append_string ] .. )
1.1 todd 75: dnl
1.41 todd 76: dnl target_name a unique name that later is used as an argument to
77: dnl 'show_target()' (which expands all devices for a
78: dnl given 'target_name').
79: dnl uniqueid same as 'uniqueid' above
80: dnl device_name string representing the device to be mknod'ed
81: dnl append_string for each append_string, `device_name' is prepended
82: dnl
83: dnl Note: 'target(a,b,c)' is equivalent to 'twrget(a,b,b,c)'
84: dnl
85: dnl
86: dnl For a short example:
87: dnl
88: dnl target(all, std)dnl
89: dnl target(all, sca, 0, 1, 2, 3)dnl
90: dnl twrget(all, cry, crypto)dnl
1.1 todd 91: dnl
92: dnl would expand to:
93: dnl
94: dnl all)
1.41 todd 95: dnl R std sca0 sca1 sca2 sca3 crypto
1.1 todd 96: dnl ;;
97: dnl
1.41 todd 98: dnl presuming '_DEV(sca, ?, ?)' and '_DEV(std)' were in the MAKEDEV.md file.
1.1 todd 99: dnl
100: dnl
101: dnl Everything is 'automatically' added to 'MAKEDEV' based on whether or
102: dnl not the '_DEV()' entry has a corresponding _mkdev() and __devitem()
1.41 todd 103: dnl entry in MAKEDEV.mi (this file).
1.1 todd 104: dnl
105: dnl Note: be very wary of adding whitespace, carriage returns, or not
106: dnl finishing a macro with ')dnl' .. otherwise, extra blank lines show up
107: dnl in the output.
108: dnl
1.31 todd 109: dnl TODO:
110: dnl
111: dnl make a 'disktgt' macro that automatically does:
1.34 deraadt 112: dnl disktgt(rd, {-rd-})
1.31 todd 113: dnl
114: dnl target(all,rd,0)
115: dnl target(ramd,rd,0)
116: dnl disk_q(rd)
1.34 deraadt 117: dnl __devitem(rd, {-rd*-}, {-rd-})dnl
1.31 todd 118: dnl
1.41 todd 119: dnl Note: not all disks are generated in 'all)'. (e.g. vax has a lot of
120: dnl disks that are not generated by 'all)')
121: dnl
1.31 todd 122: dnl
1.29 todd 123: _mkdev(loc, local, {-test -s $T.local && sh $T.local-})dnl
1.1 todd 124: dnl
1.29 todd 125: __devtitle(make, Device "make" file. Valid arguments)dnl
126: __devitem({-all-}, {-all-},
1.4 todd 127: {-makes all known devices{-,-} including local devices.
1.1 todd 128: {-#-} Tries to make the ``standard'' number of each type.-})dnl
129: dnl
130: dnl
1.29 todd 131: target(all, mcd, 0)dnl
132: twrget(all, fdesc, fd)dnl
133: target(all, st, 0, 1)dnl
134: target(all, std)dnl
135: target(all, raid, 0, 1, 2, 3)dnl
136: target(all, rz, 0, 1, 2, 3, 4)dnl
137: target(all, hp, 0, 1, 2, 3)dnl
138: target(all, ra, 0, 1, 2, 3)dnl
139: target(all, rx, 0, 1)dnl
140: target(all, wd, 0, 1, 2, 3)dnl
141: target(all, xd, 0, 1, 2, 3)dnl
142: twrget(all, aflo, fd, 0, 1, 2, 3)dnl
1.46 provos 143: target(all, systrace)dnl
1.29 todd 144: target(all, pctr)dnl
145: target(all, pctr0)dnl
146: target(all, pf)dnl
147: twrget(all, cry, crypto)dnl
148: target(all, apm)dnl
149: twrget(all, tth, ttyh, 0, 1)dnl
150: target(all, ttyA, 0, 1)dnl
151: target(all, ttyB, 0, 1, 2, 3, 4, 5)dnl
1.40 deraadt 152: twrget(all, attyB, ttyB, 0, 1, 2, 3, 4)dnl
1.29 todd 153: target(all, tty0, 0, 1, 2, 3)dnl
154: twrget(all, mac_tty0, tty0, 0, 1)dnl
155: twrget(all, tzs, tty, a, b, c, d)dnl
156: twrget(all, czs, cua, a, b, c, d)dnl
157: target(all, ttyc, 0, 1, 2, 3, 4, 5, 6, 7)dnl
158: twrget(all, com, tty0, 0, 1, 2, 3)dnl
159: target(all, lkm)dnl
160: twrget(all, mmcl, mmclock)dnl
161: target(all, lpt, 0, 1, 2)dnl
162: twrget(all, lpt, lpa, 0, 1, 2)dnl
163: target(all, joy, 0, 1)dnl
1.41 todd 164: twrget(all, rnd, random)dnl
1.29 todd 165: target(all, uk, 0)dnl
166: target(all, wt, 0)dnl
167: target(all, wdt, 0)dnl
168: twrget(all, au, audio, 0)dnl
169: twrget(all, speak, speaker)dnl
170: target(all, asc, 0)dnl
171: target(all, music, 0)dnl
172: target(all, radio, 0)dnl
173: target(all, tuner, 0)dnl
174: target(all, rmidi, 0, 1, 2, 3, 4, 5, 6, 7)dnl
175: target(all, usbs)dnl
176: target(all, adb)dnl
177: target(all, iop, 0, 1)dnl
178: target(all, pci)dnl
179: twrget(all, wsmouse, wscons)dnl
1.40 deraadt 180: twrget(all, grf_mac, grf, 0, 1, 2, 3)dnl
1.29 todd 181: target(all, par, 0)dnl
182: twrget(all, amouse, mouse, 0, 1)dnl
183: twrget(all, akbd, kbd)dnl
184: target(all, apci, 0)dnl
185: target(all, ppi, 0)dnl
186: target(all, view0, 0, 1, 2, 3, 4, 5)dnl
187: target(all, local)dnl
1.49 fgsch 188: target(all, gpr, 0)dnl
1.68 ! millert 189: target(all, ptm)dnl
1.18 todd 190: dnl
1.29 todd 191: _mkdev(all, {-all-}, {-dnl
1.18 todd 192: show_target(all)dnl
193: -})dnl
194: dnl
1.34 deraadt 195: __devitem(ramdisk, ramdisk, devices to be put on ramdisk-based media)dnl
1.29 todd 196: __devitem(std, {-std-}, standard devices)dnl
1.1 todd 197: dnl
1.18 todd 198: dnl
199: dnl
1.1 todd 200: dnl _std
201: dnl
202: dnl $1: tty
203: dnl $2: memstuff
204: dnl $3: ksyms
205: dnl $4: drum
206: dnl $5: klog
207: dnl
1.29 todd 208: define({-_std-}, {-dnl
1.1 todd 209: std)
210: M console c 0 0 600
211: M tty c $1 0
212: M mem c $2 0 640 kmem
213: M kmem c $2 1 640 kmem
214: M null c $2 2
215: M zero c $2 12
216: M stdin c major_fdesc_c 0
217: M stdout c major_fdesc_c 1
218: M stderr c major_fdesc_c 2
219: M ksyms c $3 0 640 kmem
220: M drum c $4 0 640 kmem
221: M klog c $5 0 600-})dnl
222: dnl
1.29 todd 223: target(usb, usb, 0, 1)dnl
224: target(usb, urio, 0)dnl
225: twrget(usb, uscan, uscanner, 0)dnl
226: target(usb, uhid, 0, 1, 2, 3)dnl
227: target(usb, ulpt, 0, 1)dnl
228: target(usb, ugen, 0, 1)dnl
1.64 todd 229: target(usb, ttyU, 0, 1)dnl
1.18 todd 230: dnl
1.29 todd 231: __devitem({-usbs-}, usbs, make USB devices)dnl
232: _mkdev(usbs, usbs, {-dnl
1.18 todd 233: show_target({-usb-})dnl
234: -})dnl
1.29 todd 235: __devtitle(tap, Tapes)dnl
236: __devitem(wt, {-wt* -}, QIC-interface (e.g. not SCSI) 3M cartridge tape)dnl
237: _mkdev(wt, wt*,
1.1 todd 238: {-name=wt
1.29 todd 239: n=Mult($U, 8) m=Add($n, 4)
1.1 todd 240: M $name$U b major_wt_b $n 640 operator
241: M r$name$U c major_wt_c $n 640 operator
242: M n$name$U b major_wt_b $m 640 operator
243: M nr$name$U c major_wt_c $m 640 operator-})dnl
1.29 todd 244: __devitem(tz, tz*, {-SCSI tapes{-,-} DEC TK50 cartridge tape-})dnl
245: __devitem(st, {-st*-}, SCSI tapes)dnl
246: _mkdev(st, st*, {-n=Mult($U, 16)
1.1 todd 247: for pre in " " n e en
248: do
249: M ${pre}st$U b major_st_b $n 660 operator
250: M ${pre}rst$U c major_st_c $n 660 operator
1.29 todd 251: n=Add($n, 1)
1.1 todd 252: done-})dnl
1.29 todd 253: __devitem(ct, ct*, HP300 HP-IB cartridge tape)dnl
254: __devitem(mt, mt*, (Magnetic) 9-track reel tape)dnl
255: __devitem(ht, ht*, massbus tm03 & tu??)dnl
256: __devitem(tm, tm*, unibus tm11 & te10 emulations (e.g. Emulex tc-11))dnl
257: __devitem(ts, ts*, unibus ts11)dnl
258: __devitem(ut, ut*, unibus tu45 emulations (e.g.si 9700))dnl
259: __devtitle(dis, Disks)dnl
260: __devitem(rz, rz*, SCSI disks)dnl
1.31 todd 261: __devitem(sd, {-sd*-}, {-SCSI disks, includes flopticals-})dnl
1.29 todd 262: __devitem(hd, {-hd*-}, HP300 HP-IB disks)dnl
263: __devitem(cd, {-cd*-}, SCSI cdrom drives)dnl
264: __devitem(acd, acd*, ATAPI cdrom drives)dnl
265: _mkdev(cd, cd*, {-dodisk2 cd $U major_cd_b major_cd_c $U 0{--}ifstep(cd)-})dnl
266: __devitem(mcd, mcd*, Mitsumi cdrom drives)dnl
267: _mkdev(mcd, mcd*, {-dodisk2 mcd $U major_mcd_b major_mcd_c $U 0{--}ifstep(mcd)dnl
268: -})dnl
269: __devitem(ch, {-ch*-}, SCSI media changer)dnl
270: _mcdev(ch, ch*, ch, {-major_ch_c-}, 660, operator)dnl
271: __devitem(uk, uk*, SCSI Unknown device)dnl
272: _mcdev(uk, uk*, uk, {-major_uk_c-}, 640, operator)dnl
273: __devitem(ss, ss*, SCSI scanners)dnl
1.31 todd 274: _mkdev(ss, ss*, {-M ss$U c major_ss_c Mult($U,16) 640 operator
275: M nss$U c major_ss_c Add(Mult($U,16),1) 640 operator
276: M enss$U c major_ss_c Add(Mult($U,16),3) 640 operator
1.1 todd 277: RMlist="$RMlist scan$U"
278: MKlist="$MKlist;umask 77;ln -s ss$U scan$U"-})dnl
1.29 todd 279: __devitem(ses, ses*, SES/SAF-TE SCSI devices)dnl
280: _mkdev(ses, ses*, {-M ses$U c major_ses_c $U 640 operator-})dnl
281: __devitem(ramd, ramdisk, makes all devices for a ramdisk kernel)dnl arc
282: _mkdev(ramd, ramdisk, {-dnl
1.20 todd 283: show_target(ramd)dnl
1.29 todd 284: -})dnl
285: target(ramd, std)dnl
286: target(ramd, random)dnl
287: target(ramd, bpf, 0)dnl
1.34 deraadt 288: __devitem(rd, {-rd*-}, "rd" pseudo-disks)dnl
1.29 todd 289: _mkdev(rd, rd*, {-dodisk2 rd $U major_rd_b major_rd_c $U 0{--}ifstep(rd)-})dnl
290: __devitem(xd, xd*, Xylogic 753/7053 disks)dnl
291: __devitem(xy, xy*, {- Xylogic 450/451 disks-})dnl
292: __devitem(flo, {-fd*-}, {-Floppy disk drives (3 1/2"{-,-} 5 1/4")-})dnl
293: _mkdev(flo, fd*,
1.1 todd 294: {-typnam=$U${i#fd[01]*}
295: case $typnam in
296: 0|1) typnum=0;; # no type specified, assume A
1.26 deraadt 297: *A) typnum=0; typnam=0;;
298: *B) typnum=1;;
299: *C) typnum=2;;
300: *D) typnum=3;;
301: *E) typnum=4;;
302: *F) typnum=5;;
303: *G) typnum=6;;
304: *H) typnum=7;;
305: *) echo bad type $typnam for $i; exit 1;;
1.1 todd 306: esac
307: case $U in
308: 0|1) blk=major_flo_b; chr=major_flo_c;;
309: *) echo bad unit $U for $i; exit 1;;
310: esac
311: nam=fd${typnam}
1.29 todd 312: n=Add(Mult($U, 128), Mult($typnum, 16))
1.1 todd 313: M ${nam}a b $blk $n 640 operator
1.29 todd 314: M ${nam}b b $blk Add($n, 1) 640 operator
315: M ${nam}c b $blk Add($n, 2) 640 operator
1.1 todd 316: M r${nam}a c $chr $n 640 operator
1.29 todd 317: M r${nam}b c $chr Add($n, 1) 640 operator
318: M r${nam}c c $chr Add($n, 2) 640 operator-}, 664)dnl
319: __devitem(aflo, ramdisk, devices needed for install floppies)dnl
320: _mkdev(aflo, fd*, {-case $U in 0|1|2|3)
321: M fd${U}a b major_aflo_b Mult($U, 16) 640 operator
322: M fd${U}b b major_aflo_b Add(Mult($U, 16), 1) 640 operator
323: M rfd${U}a c major_aflo_c Mult($U, 16) 640 operator
324: M rfd${U}b c major_aflo_c Add(Mult($U, 16), 1) 640 operator;;
1.1 todd 325: *) echo bad unit for floppy disk in: $i;;
326: esac-})dnl
1.29 todd 327: __devitem(iop, iop*, I2O controller device)dnl
328: _mcdev(iop, iop*, iop, {-major_iop_c-}, 660)dnl
329: __devitem(wdt, wdt0, watchdog timer)dnl
330: _mcdev(wdt, wdt0, wdt, {-major_wdt_c-}, 440, operator)dnl
331: __devitem(local, local, configuration specific devices)dnl
332: __devitem(wd, {-wd*-}, {-"winchester" disk drives (ST506, IDE, ESDI, RLL, ...)-})dnl
333: __devitem(ccd, ccd*, concatenated disk devices)dnl
334: __devitem(raid, raid*, RAIDframe disk devices)dnl
335: __devitem(vnd, vnd*, "file" pseudo-disks)dnl
336: _mkdev(vnd, vnd*, {-dodisk vnd $U major_vnd_b major_vnd_c $U 0{--}ifstep(vnd)
1.61 tedu 337: dodisk svnd $U major_vnd_b major_vnd_c $U 2048{--}ifstep(vnd)-})dnl
1.29 todd 338: __devitem(ra, ra*, {-MSCP disks (ra??, hd??)-})dnl
339: __devitem(hp, hp*, {-massbuss rm??-})dnl
340: __devitem(hk, hk*, {-unibus rk06 and rk07-})dnl
341: __devitem(up, up*, {-other unibus devices (e.g. on Emulex sc-21v controller)-})dnl
342: __devitem(rb, rb*, {-730 idc w/ rb80 and/or rb02-})dnl
343: __devitem(rx, rx*, {-MSCP floppy disk (rx33/50/...)-})dnl
344: __devitem(rl, rl*, {-unibus r102-})dnl
345: __devitem(hd, hd*, {-HDC9224 hd disks on VS2000-})dnl
1.1 todd 346: dnl
347: dnl For normal disk devices, add a disk_q entry; anything else define like
348: dnl the rest (such as vnd above).
349: dnl
1.18 todd 350: disk_q({-ccd-})dnl
351: disk_q({-hd-})dnl
352: disk_q({-hk-})dnl
353: disk_q({-hp-})dnl
354: disk_q({-ra-})dnl
355: disk_q({-raid-})dnl
356: disk_q({-rb-})dnl
357: disk_q({-rl-})dnl
358: disk_q({-rx-})dnl
359: disk_q({-sd-})dnl
1.1 todd 360: disk_q({-xy-})dnl
361: disk_q({-xd-})dnl
1.18 todd 362: disk_q({-up-})dnl
363: disk_q({-wd-})dnl
1.1 todd 364: disk_q({-rz-})dnl
365: dnl
1.29 todd 366: __devitem(loc, local, configuration specific devices)dnl
367: _mkdev(loc, local, {-test -s $T.local && sh $T.local-})dnl
368: _mkdev({-disks-}, {-undefine({-C_ase-})show_disks()undefine({-C_ase-})-},
1.1 todd 369: {-case $i in
370: show_disks2()dnl
1.6 todd 371: esac-})dnl
1.1 todd 372: __mkdev({-disks-}){--}dnl
373: dnl
1.29 todd 374: __devtitle(cons, Console ports)dnl
375: __devitem(ttyv0, ttyv0, pccons or pcvt screen 0)dnl
376: __devitem(ttyv, ttyv*, pcvt)dnl
377: __devitem(wscons, ttyC0, wscons screen 0)dnl
1.35 todd 378: twrget(wscons, wscons, ttyC, cfg, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b)dnl
379: target(wscons, wsmux)dnl
380: target(wscons, wskbd, 0, 1, 2, 3)dnl
381: target(wscons, wsmouse, 0, 1, 2, 3)dnl
1.29 todd 382: _mkdev({-wscons-}, {-wscons-}, {-dnl
1.35 todd 383: show_target(wscons)dnl
384: -})dnl
1.36 todd 385: __devitem(wsdisp, ttyC-F*, wscons virtual consoles)dnl
1.35 todd 386: _mkdev({-wsdisp-}, tty[C-F]*, {-U=${i##tty[C-F]}
387: case $i in
388: ttyC*) n=C m=expr(0*256);;
389: ttyD*) n=D m=expr(1*256);;
390: ttyE*) n=E m=expr(2*256);;
391: ttyF*) n=F m=expr(3*256);;
392: esac
1.3 todd 393: case $U in
1.35 todd 394: [0-9a-f]) M tty$n$U c major_wsdisp_c {-$(( 16#$U + $m ))-} 600;;
395: cfg) M tty${n}cfg c major_wsdisp_c Add(255,$m) 600;;
1.3 todd 396: *) echo bad unit $U for $i; exit 1;;
1.6 todd 397: esac-})dnl
1.29 todd 398: __devitem(wskbd, wskbd*, wscons keyboards)dnl
399: _mkdev(wskbd, wskbd*, {-M wskbd$U c major_wskbd_c $U 600-})dnl
400: __devitem(wsmux, wsmux, wscons keyboard/mouse mux devices)dnl
401: _mkdev(wsmux, wsmux|wsmouse|wskbd, {-M wsmouse c major_wsmux_c 0 600
1.1 todd 402: M wskbd c major_wsmux_c 1 600-})dnl
1.29 todd 403: __devitem(pcons, console, PROM console)dnl
404: __devtitle(point, Pointing devices)dnl
405: __devitem(wsmouse, wsmouse*, wscons mice)dnl
406: _mkdev(wsmouse, wsmouse*, {-M wsmouse$U c major_wsmouse_c $U 600-})dnl
407: __devitem(quad, quadmouse, "quadrature mouse")dnl
408: __devtitle(pty, Pseudo terminals)dnl
1.68 ! millert 409: __devitem(ptm, ptm, pty master device)dnl
! 410: _mkdev(ptm, ptm, {-M ptm c major_ptm_c 0 666-})dnl
1.29 todd 411: __devitem(tty, tty*, set of 16 slave psuedo terminals)dnl
412: __devitem(pty, pty*, set of 16 master pseudo terminals)dnl
1.31 todd 413: _mkdev(pty, pty*, {-if [ $U -gt 15 ]; then
414: echo bad unit for pty in: $i
415: continue
416: fi
417: set -A tbl p q r s t u v w x y z P Q R S T
418: name=${tbl[$U]}
1.1 todd 419: n=0
420: while [ $n -lt 16 ]
421: do
422: nam=$name$(hex $n)
1.31 todd 423: off=Mult($U, 16)
1.29 todd 424: M tty$nam c major_tty_c Add($off, $n)
425: M pty$nam c major_pty_c Add($off, $n)
426: n=Add($n, 1)
1.1 todd 427: done-})dnl
1.29 todd 428: __devitem(dc, dc*, {-4 channel serial interface (keyboard{-,-} mouse{-,-}modem{-,-} printer)-})dnl
429: __devtitle(prn, Printers)dnl
430: __devitem(par, par*, motherboard parallel port)dnl
431: __devitem(lpt, lpt*, IEEE 1284 centronics printer)dnl
432: _mkdev(lpt, lpt*|lpa*,
1.1 todd 433: {-case $i in
434: lpt*) n=lpt f=0;;
435: lpa*) n=lpa f=128;;
436: esac
1.29 todd 437: M $n$U c major_lpt_c Add($U, $f) 600-})dnl
438: __devitem(lpa, lpa*, interruptless lp)dnl
439: __devitem(ppi, ppi*, HP-IB plotters)dnl
440: __devtitle({-usb-}, USB devices)dnl
441: __devitem({-usb-}, usb*, Bus control devices used by usbd for attach/detach)dnl
442: _mkdev({-usb-}, usb*, {-[ "$i" = "usb" ] && u= || u=$U
1.1 todd 443: M usb$u c major_usb_c $U 660-})dnl
1.29 todd 444: __devitem(uhid, uhid*, Generic HID devices)dnl
445: _mcdev({-uhid-}, uhid*, {-uhid-}, {-major_uhid_c-}, 660)dnl
446: __devitem(ulpt, ulpt*, Printer devices)dnl
447: _mcdev({-ulpt-}, ulpt*, {-ulpt-}, {-major_ulpt_c-}, 660)dnl
1.64 todd 448: __devitem(ttyU, ttyU*, Serial ports)dnl
1.65 todd 449: _mkdev({-ttyU-}, {-ttyU[0-9a-zA-Z]-}, {-U=${i#ttyU*}
450: o=$(alph2d $U)
451: M ttyU$U c major_ttyU_c $o 660 dialer uucp-})dnl
1.29 todd 452: __devitem(urio, urio*, Diamond Multimedia Rio 500)dnl
453: _mcdev({-urio-}, urio*, {-urio-}, {-major_urio_c-}, 660)dnl
454: __devitem(uscan, uscanner*, Scanners)dnl
455: _mcdev({-uscan-}, uscanner*, {-uscanner-}, {-major_uscan_c-}, 660)dnl
456: __devitem(ugen, ugen*, Generic device)dnl
457: _mkdev(ugen, ugen*, {-n=Mult($U, 16)
1.1 todd 458: for j in 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
459: do
1.29 todd 460: M ugen$U.$j c major_ugen_c Add($n, $j) 660
1.1 todd 461: done-})dnl
1.29 todd 462: __devtitle(cpu, Cpus)dnl
463: __devitem(cpu, cpu*, cpus)dnl
464: __devtitle(call, Call units)dnl
465: __devtitle(term, Terminal ports)dnl
466: __devtitle(termp, Terminal multiplexers)dnl
467: __devitem(dca, dca*, HP200/300 single port serial interface)dnl
468: __devitem(dcm, dcm*, HP200/300 4 port serial mux interface)dnl
469: __devitem(apci, apci*, HP400 4 port serial mux interface)dnl
1.62 todd 470: __devitem({-com-}, {-tty[0-7][0-9a-f]-}, NS16x50 serial ports)dnl
471: _mkdev(com, {-tty[0-7][0-9a-f]-}, {-U=${i#tty*}
1.63 todd 472: o=$(h2d $U)
1.62 todd 473: M tty$U c major_com_c $o 660 dialer uucp
474: M cua$U c major_com_c Add($o, 128) 660 dialer uucp-})dnl
1.29 todd 475: __devitem(ttyc, ttyc*, Cyclades serial ports)dnl
476: __devitem(tzs, tty[a-z]*, Zilog 8530 Serial Port)dnl
477: _mkdev(tzs, {-tty[a-z]-}, {-u=${i#tty*}
1.1 todd 478: case $u in
479: a) n=0 ;;
480: b) n=1 ;;
481: c) n=4 ;;
482: d) n=5 ;;
483: *) echo unknown tty device $i ;;
484: esac
485: M tty$u c major_tzs_c $n 660 dialer uucp-})dnl
1.29 todd 486: __devitem(tth, ttyh*, Sab82532 serial devices)dnl
487: _mkdev(tth, ttyh*, {-M ttyh$U c major_tth_c $U 660 dialer uucp-})dnl
488: __devitem(czs, cua[a-z]*, Zilog 8530 Serial Port)dnl
489: _mkdev(czs, cua[a-z], {-u=${i#cua*}
1.1 todd 490: case $u in
491: a) n=0 ;;
492: b) n=1 ;;
493: c) n=4 ;;
494: d) n=5 ;;
1.41 todd 495: *) echo unknown cua device $i ;;
1.1 todd 496: esac
1.29 todd 497: M cua$u c major_czs_c Add($n, 128) 660 dialer uucp-})dnl
498: __devitem(arm_tty, tty*, {-alias for PC COM ports{-,-} this is what the system really wants-})dnl
499: __devitem(tty0, tty00, standard serial port)dnl
500: __devitem(mac_tty0, tty00, standard serial port)dnl
501: __devitem(ttyA, ttyA*, mfc serial ports)dnl
502: __devitem(ttyz, tty[a-d], onboard zs serial ports)dnl
503: __devitem(cuaz, cua[a-d], onboard zs serial ports)dnl
504: __devitem(ttyB, ttyB?, DEC 3000 ZS8530 ("scc") serial ports)dnl
505: __devitem(scc, scc*, 82530 serial interface)dnl
506: __devitem(arc_ttyC, ttyC0, pccons)dnl
507: __devitem(i386_ttyC, ttyC*, pcvt)dnl
508: __devitem(ttyC, ttyC?, {-AlphaStation NS16550 ("com serial ports")-})dnl
509: __devitem(ttyE, ttyE?, Workstation console (framebuffer & keyboard) tty emulators)dnl
510: __devitem(ser02, ser02, {-serial2 port (channel A on 8530)-})dnl
511: __devitem(mdm02, mdm02, {-modem2 port (channel B on 8530)-})dnl
512: __devtitle(spec, Special purpose devices)dnl
513: __devitem(apm, apm , power management device)dnl
514: _mkdev(apm, apm*, {-M apm c major_apm_c 0 644
1.1 todd 515: M apmctl c major_apm_c 8 644-})dnl
1.29 todd 516: __devitem(pcmcia, pcmcia*, PCMCIA card drivers)dnl
517: __devitem(pctr, pctr*, PC Performance Tuning Register access device)dnl
518: _mkdev(pctr, pctr, {-M pctr c major_pctr_c 0 644-})dnl
1.46 provos 519: __devitem(systrace, systrace*, system call tracing device)dnl
520: _mkdev(systrace, systrace, {-M systrace c major_systrace_c 0 644-})dnl
1.29 todd 521: __devitem(au, audio*, audio device)dnl
522: _mkdev(au, audio*, {-M sound$U c major_au_c $U
523: M mixer$U c major_au_c Add($U, 16)
524: M audio$U c major_au_c Add($U, 128)
525: M audioctl$U c major_au_c Add($U, 192)
1.1 todd 526: MKlist="$MKlist;[ -e audio ] || ln -s audio$U audio"
527: MKlist="$MKlist;[ -e mixer ] || ln -s mixer$U mixer"
528: MKlist="$MKlist;[ -e sound ] || ln -s sound$U sound"
529: MKlist="$MKlist;[ -e audioctl ] || ln -s audioctl$U audioctl"-})dnl
1.29 todd 530: __devitem(asc, asc*, ASC Audio device)dnl
531: _mkdev(asc, asc*, {-M asc$U major_asc_c 0-})dnl
532: __devitem(music, music*, midi devices)dnl
533: _mkdev(music, music*, {-M music$U c major_music_c $U
534: M sequencer$U c major_music_c Add($U, 128)
1.1 todd 535: MKlist="$MKlist;[ -e music ] || ln -s music$U music"
536: MKlist="$MKlist;[ -e sequencer ] || ln -s sequencer$U sequencer"-})dnl
1.29 todd 537: __devitem(radio, radio*, FM tuner device)dnl
538: _mkdev(radio, radio*, {-M radio$U c major_radio_c $U
1.8 todd 539: MKlist="$MKlist;[ -e radio ] || ln -s radio$U radio"-})dnl
1.29 todd 540: __devitem(fdesc, fd, makes fd/* for the fdescfs)dnl
541: _mkdev(fdesc, fd, {-RMlist="mkdir -p fd;$RMlist" n=0
542: while [ $n -lt 64 ];do M fd/$n c major_fdesc_c $n;n=Add($n, 1);done
1.1 todd 543: MKlist="$MKlist;chmod 555 fd"-})dnl
1.29 todd 544: __devtitle(graph, Graphics devices)dnl
545: __devitem(grf_mac, grf*, {-custom chip (grf0){-,-} Retina Z2/Z3 (grf1/grf2){-,-}
1.1 todd 546: {-#-} Cirrus boards (grf3){-,-} A2410 (grf4) video or
547: {-#-} CyberVision 64 (grf5)-})dnl
1.29 todd 548: __devitem(ite, ite*, terminal emulator interface to HP300 graphics devices)dnl
549: __devitem({-hil-}, {-hil-}, HP300 HIL input devices)dnl
550: __devitem(oppr, openprom)dnl
551: _cdev(oppr, openprom, 70, 0)dnl
552: __devitem(cry, crypto, hardware crypto access driver)dnl
553: _mkdev(cry, crypto, {-M crypto c major_cry_c-} 0)dnl
554: __devitem(pf, pf*, Packet Filter)dnl
555: _mkdev(pf, {-pf*-}, {-M pf c major_pf_c 0 600-})dnl
556: __devitem(bpf, bpf*, Berkeley Packet Filter)dnl
557: _mkdev(bpf, {-bpf*-}, {-M bpf$U c major_bpf_c $U 600-}, 600)dnl
558: _mkdev(tun, {-tun*-}, {-M tun$U c major_tun_c $U 600-}, 600)dnl
559: __devitem(speak, speaker, pc speaker)dnl
560: _mkdev(speak, speaker, {-M speaker c major_speak_c 0 600-})dnl
561: __devitem(kbd, kbd, keyboard (provides events, for X11))dnl
562: _cdev(kbd, kbd, {-major_kbd_c-}, 0, 600)dnl
563: __devitem(kbd_atari, kbd, Atari keyboard)dnl
564: __devitem(akbd, kbd, Amiga keyboard)dnl
565: __devitem(rkbd, kbd, raw keyboard)dnl
566: __devitem(kbdctl, kbdctl, keyboard control)dnl
567: __devitem(beep, beep, riscpc speaker)dnl
568: __devitem(iic, iic*, IIC bus device)dnl
569: __devitem(rtc, rtc*, RTC device)dnl
570: __devitem(view, view*, generic interface to graphic displays)dnl
571: __devitem(aconf, aconf, {-autoconfig information (not yet)-})dnl
572: __devitem(mouse-, mouse-*, "mouse link")dnl
573: __devitem(mouse, mouse, mouse (provides events, for X11))dnl
574: __devitem(amouse, mouse*, Amiga mice)dnl
575: __devitem(lkm, lkm, loadable kernel modules interface)dnl
1.55 deraadt 576: _cdev(lkm, lkm, {-major_lkm_c-}, 0, 640, _lkm)dnl
1.29 todd 577: __devitem(mmcl, mmclock, memory mapped clock)dnl
578: __devitem(tun, tun*, network tunnel driver)dnl
579: __devitem(rnd, *random, inkernel random data source)dnl
580: _mkdev(rnd, *random, {-n=0
1.1 todd 581: for pre in " " s u p a
582: do
583: M ${pre}random c major_rnd_c $n 644
1.29 todd 584: n=Add($n, 1)
585: done-}, 644)dnl
586: __devitem(joy, joy*, joystick driver)dnl
587: _mcdev(joy, joy*, joy, {-major_joy_c-}, 666)dnl
588: __devitem(mag, magma*, magma card (makes 16 tty and 2 bpp))dnl
589: __devitem(bppmag, bppmag[mno], magma parallel port device)dnl
590: __devitem(spif, spif*, spif card (makes 8 tty and 1 bpp))dnl
591: __devitem(bppsp, bpp[jkl], spif parallel port device)dnl
592: _mkdev(mag, magma*, {-case $U in
1.18 todd 593: 0) offset=0 nam=m;;
594: 1) offset=16 nam=n;;
595: 2) offset=32 nam=o;;
596: *) echo "bad unit for $i: $U"; exit 127;;
597: esac
1.29 todd 598: offset=Mult($U, 64)
1.18 todd 599: n=0
600: while [ $n -lt 16 ]
601: do
602: name=${nam}`hex $n`
1.29 todd 603: M tty$name c major_mag_c Add($offset, $n) 660 dialer uucp
604: n=Add($n, 1)
1.18 todd 605: done
1.29 todd 606: M bpp${nam}0 c major_bppmag_c Add($offset, 0) 600
607: M bpp${nam}1 c major_bppmag_c Add($offset, 1) 600-})dnl
608: _mkdev(spif, spif*, {-case $U in
1.18 todd 609: 0) offset=0 nam=j;;
610: 1) offset=16 nam=k;;
611: 2) offset=32 nam=l;;
612: *) echo "bad unit for $i: $U"; exit 127;;
613: esac
1.29 todd 614: offset=Mult($U, 64)
1.18 todd 615: n=0
616: while [ $n -lt 8 ]
617: do
618: name=${nam}`hex $n`
1.29 todd 619: M tty$name c major_spif_c Add($offset, $n) 660 dialer uucp
620: n=Add($n, 1)
1.18 todd 621: done
1.29 todd 622: M bpp${nam}0 c major_bppsp_c Add($offset, 0) 600-})dnl
623: __devitem(bpp, bpp*, parallel port devices)dnl
1.59 jason 624: _mkdev(bpp, {-bpp*-}, {-M bpp$U c major_bpp_c $U 600-}, 600)dnl
1.29 todd 625: __devitem(xfs, xfs*, XFS filesystem devices)dnl
626: _mcdev(xfs, xfs*, xfs, {-major_xfs_c-}, 600)dnl
627: __devitem(hil, hil, HIL input devices)dnl
628: __devitem(rmidi, rmidi*, raw midi devices)dnl
629: _mcdev(rmidi, rmidi*, rmidi, {-major_rmidi_c-}, 666)dnl
630: __devtitle(plat, Platform-specific devices)dnl
631: __devitem(fb, fb*, framebuffer device)dnl
632: __devitem(bktr, bktr*, video capturing)dnl
633: _mcdev(bktr, bktr*, bktr, {-major_bktr_c-}, 644)dnl
634: __devitem(tuner, tuner*, tuner device)dnl
635: _mkdev(tuner, tuner*, {-M tuner$U c major_bktr_c Add(Mult($U, 2), 16) 644-}, 644)dnl
636: __devitem(pci, pci, PCI bus device)dnl
1.43 deraadt 637: _mkdev(pci, pci, {-M pci c major_pci_c 0 600-}, 600)dnl
1.29 todd 638: __devitem(adb, adb, Apple Desktop bus event interface)dnl
639: _mkdev(adb, adb, {-M adb c major_adb_c 0-})dnl
640: __devitem(pdc, pdc, PDC device)dnl
641: _mkdev(local, local, {-test -s $T.local && sh $T.local-}, 666)dnl
1.49 fgsch 642: __devitem(gpr, gpr*, gpr400 pcmcia device)dnl
643: _mcdev(gpr, gpr*, gpr, {-major_gpr_c-})dnl
1.1 todd 644: dnl
645: divert(1)dnl
646: include(etc.MACHINE/MAKEDEV.md)dnl
647: dnl
648: dnl
649: divert(0)dnl
650: #!/bin/sh -
651: #
652: # THIS FILE AUTOMATICALLY GENERATED. DO NOT EDIT.
653: # generated from:
654: #
655: show_vers()dnl <-- now that all files are included, show versions
656: #
657: dnl
658: divert(2)dnl
659: PATH=/sbin:/usr/sbin:/bin:/usr/bin
660: T=$0
661:
662: # set this to echo for Echo-Only debugging
663: [ "$eo" ] || eo=
664:
665: hex()
666: {
667: case ${--}1 in
1.26 deraadt 668: [0-9]) echo -n {-$-}1;;
669: 10) echo -n a;;
670: 11) echo -n b;;
671: 12) echo -n c;;
672: 13) echo -n d;;
673: 14) echo -n e;;
674: 15) echo -n f;;
1.1 todd 675: esac
1.65 todd 676: }
677:
678: alph2d()
679: {
680: local t="$1"
681: local p="0123456789abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ"
682: local sub=${p%${t}*}
683: echo ${#sub}
1.1 todd 684: }
1.26 deraadt 685:
1.62 todd 686: h2d()
1.1 todd 687: {
1.62 todd 688: local s="$1"
689: local f=${s%*[0-9a-f]} n=${s#[0-9a-f]*}
690:
691: echo $(($(_h2d $f)*16+ $(_h2d $n) ))
692: }
693:
694: _h2d()
695: {
696: case $1 in
697: [0-9]) echo -n $1;;
698: a) echo -n 10;;
699: b) echo -n 11;;
700: c) echo -n 12;;
701: d) echo -n 13;;
702: e) echo -n 14;;
703: f) echo -n 15;;
1.1 todd 704: esac
705: }
1.26 deraadt 706:
1.1 todd 707: unt()
708: {
709: # XXX pdksh can't seem to deal with locally scoped variables
710: # in ${foo#$bar} expansions
711: arg="{-$-}1"
712: tmp="${arg#[a-zA-Z]*}"
713: tmp="${tmp%*[a-zA-Z]}"
714: while [ "$tmp" != "$arg" ]
715: do
716: arg=$tmp
717: tmp="${arg#[a-zA-Z]*}"
718: tmp="${tmp%*[a-zA-Z]}"
719: done
720: echo $arg
721: }
722: dnl
1.29 todd 723: dnl dodisk(name, unit, blkmaj, chrmaj, unit, off[, stepping])
1.5 todd 724: dnl arg: 1 2 3 4 5 6 7
1.1 todd 725: dnl
1.26 deraadt 726:
1.1 todd 727: dodisk()
728: {
1.27 todd 729: [ "$DEBUG" ] && set -x
1.29 todd 730: n=Add(Mult(${5}, ${7:-16}), ${6}) count=0
1.1 todd 731: RMlist="$RMlist {-$-}1{-$-}2? r{-$-}1{-$-}2?"
1.13 todd 732: [ 0$7 -ne 8 ] && l="i j k l m n o p"
733: for d in a b c d e f g h $l
1.1 todd 734: do
1.29 todd 735: M {-$-}1{-$-}2$d b {-$-}3 Add($n, $count) 640
736: M r{-$-}1{-$-}2$d c {-$-}4 Add($n, $count) 640
1.1 todd 737: let count=count+1
738: done
1.58 millert 739: MKlist="$MKlist;chown root:operator {-$-}1{-$-}2? r{-$-}1{-$-}2?"
1.1 todd 740: }
741: dnl
1.29 todd 742: dnl dodisk2(name, unit, blkmaj, chrmaj, unit, off[, stepping])
1.1 todd 743: dnl
744: dnl 1. name - prefix name of the device
745: dnl 2. unit - beginning unit number for block devices
746: dnl 3. blkmaj - block device major number
747: dnl 4. chrmaj - character device major number
748: dnl 5. unit - beginning unit number for character devices
749: dnl 6. off - offset from 0 for all minor numbers (see svnd for an example)
1.5 todd 750: dnl 7. step - optional, defaults to 16, number of partitions per device
1.1 todd 751: dnl
1.26 deraadt 752:
1.1 todd 753: dodisk2()
754: {
1.29 todd 755: n=Add(Mult({-$-}5, ${7:-16}), {-$-}6)
1.1 todd 756: M {-$-}1{-$-}2a b {-$-}3 $n 640 operator
757: M r{-$-}1{-$-}2a c {-$-}4 $n 640 operator
1.29 todd 758: n=Add($n, 2)
1.1 todd 759: M {-$-}1{-$-}2c b {-$-}3 $n 640 operator
760: M r{-$-}1{-$-}2c c {-$-}4 $n 640 operator
761: }
762:
763: # M name b/c major minor [mode] [group]
764: RMlist="rm -f"
765: MKlist=":"
1.26 deraadt 766:
1.1 todd 767: mkl() {
768: dnl
769: dnl uncomment if multi mknod happens
770: dnl
1.29 todd 771: ifelse(1, 0,
1.1 todd 772: [ "${mklist[{-$-}1]}" ] && mklist[{-$-}1]="${mklist[{-$-}1]} {-$-}2 {-$-}3 {-$-}4 {-$-}5" || {
1.30 todd 773: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
774: modes="$modes {-$-}1"
1.1 todd 775: },
776: dnl
777: dnl non multi mknod
778: dnl
1.26 deraadt 779: [ "${mklist[{-$-}1]}" ] && {
780: mklist[{-$-}1]="${mklist[{-$-}1]};mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
781: } || {
782: mklist[{-$-}1]="mknod -m {-$-}1 {-$-}2 {-$-}3 {-$-}4 {-$-}5"
783: modes="$modes {-$-}1"
784: })
1.1 todd 785: }
1.26 deraadt 786:
1.1 todd 787: M() {
788: RMlist="$RMlist {-$-}1"
789: mkl ${5-666} {-$-}1 {-$-}2 {-$-}3 {-$-}4
790: mklist="$mklist {-$-}1"
791: G={-$-}{6:-wheel}
792: [ "{-$-}7" ] && {
1.58 millert 793: MKlist="$MKlist;chown {-$-}7:{-$-}G {-$-}1"
1.1 todd 794: } || {
795: case $G in
1.56 todd 796: wheel)g=0;;kmem)g=2;;operator)g=5;;tty)g=4;;dialer)g=117;;_lkm)g=61;;
1.1 todd 797: esac
798: [ "${grplist[$g]}" ] && {
799: grplist[$g]="${grplist[$g]} {-$-}1"
800: } || {
801: groups="$groups $g"
802: grplist[$g]="chgrp $G {-$-}1"
803: }
804: }
805: return 0
806: }
807: divert(7)dnl
808: dnl
809: dnl there is no blank line at the end of etc.arch/MAKEDEV.md files, so add one
810: dnl on the following line:
811:
812: show_devs()dnl
813: dnl
814: divert(9)dnl
815: *)
816: echo $i: unknown device
817: ;;
818: esac
819: done
820: }
821: _recurse "$@"
822: list="$RMlist"
823: for mode in $modes; do
824: list="$list;${mklist[$mode]}"
825: done
826: for group in $groups; do
827: list="$list;${grplist[$group]}"
828: done
829: list="$list;$MKlist"
1.67 todd 830: if [ "$eo" = "echo" ]; then
1.1 todd 831: $eo "$list"
832: else
833: echo "$list" | sh
834: fi
1.41 todd 835: divert(3)dnl
1.1 todd 836: dnl
1.26 deraadt 837:
1.1 todd 838: R() {
1.23 todd 839: [ "$DEBUG" ] && set -x
1.1 todd 840: for i in "$@"
841: do
842: U=`unt $i`
843: [ "$U" ] || U=0
844:
845: case $i in
846: dnl