Return to gettytab CVS log

Up to [local] / src / etc

Almost all terminals now support hardware tabs so default to OXTABS
off.

This makes three changes: adds the ht capability to the standard lines
in gettytab(5); removes OXTABS from TTYDEF_OFLAG in ttydefaults.h (the
defaults used by pty(4) - diff from martijn); and only sets OXTABS on
terminals which lack hts and tbc in tset(1) (from Thomas Dickey
upstream).

Addresses problems reported by tedu.

ok millert

#	$OpenBSD: gettytab,v 1.7 2019/03/12 11:01:25 nicm Exp $
#
# Most of the table entries here are just copies of the old getty table.
# It is by no means certain, or even likely, that any of them are optimal
# for any purpose whatever.  Nor is it likely that more than a couple are
# even correct.
#
# The default gettytab entry, used to set defaults for all other
# entries, and in cases where getty is called with no table name
#
default:\
	:np:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:

#
# Fixed speed entries
#
#	The "std.NNN" names are known to the special case
#	portselector code in getty, however they can
#	be assigned to any table desired.
#	The "NNN-baud" names are known to the special case
#	autobaud code in getty, and likewise can
#	be assigned to any table desired (hopefully the same speed).
#
a|std.110|110-baud:\
	:nd#1:cd#1:uc:sp#110:
b|std.134|134.5-baud:\
	:ep:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl:
1|std.150|150-baud:\
	:ep:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 :
c|std.300|300-baud:\
	:nd#1:cd#1:sp#300:ht:
d|std.600|600-baud:\
	:nd#1:cd#1:sp#600:ht:
f|std.1200|1200-baud:\
	:fd#1:sp#1200:ht:
6|std.2400|2400-baud:\
	:sp#2400:ht:
7|std.4800|4800-baud:\
	:sp#4800:ht:
2|std.9600|9600-baud:\
	:sp#9600:ht:
g|std.19200|19200-baud:\
	:sp#19200:ht:
std.38400|38400-baud:\
	:sp#38400:ht:
std.57600|57600-baud:\
	:sp#57600:ht:
std.115200|115200-baud:\
	:sp#115200:ht:
std.1500000|1500000-baud:\
	:sp#1500000:ht:

#
# Dial in rotary tables, speed selection via 'break'
#
0|d300|Dial-300:\
	:nx=d1200:cd#2:sp#300:
d1200|Dial-1200:\
	:nx=d150:fd#1:sp#1200:
d150|Dial-150:\
	:nx=d110:lm@:tc=150-baud:
d110|Dial-110:\
	:nx=d300:tc=300-baud:

#
# Fast dialup terminals, 2400/1200/300 rotary (can start either way)
#
D2400|d2400|Fast-Dial-2400:\
	:nx=D1200:tc=2400-baud:
3|D1200|Fast-Dial-1200:\
	:nx=D300:tc=1200-baud:
5|D300|Fast-Dial-300:\
	:nx=D2400:tc=300-baud:

#
#telebit (19200)
#
t19200:\
	:nx=t2400:tc=19200-baud:
t2400:\
	:nx=t1200:tc=2400-baud:
t1200:\
	:nx=t19200:tc=1200-baud:

#
#telebit (9600)
#
t9600:\
	:nx=t2400a:tc=19200-baud:
t2400a:\
	:nx=t1200a:tc=2400-baud:
t1200a:\
	:nx=t9600:tc=1200-baud:

#
# Odd special case terminals
#
-|tty33|asr33|Pity the poor user of this beast:\
	:tc=110-baud:

4|Console|Console Decwriter II:\
	:nd@:cd@:rw:tc=300-baud:

e|Console-1200|Console Decwriter III:\
	:fd@:nd@:cd@:rw:tc=1200-baud:

i|Interdata console:\
	:uc:sp#0:

l|lsi chess terminal:\
	:sp#300:

X|Xwindow|X window system:\
	:fd@:nd@:cd@:rw:sp#9600:

P|Pc|Pc console:\
	:np:sp#9600:

# 8 bit clean Sun console
S|suncons|Sun Console:\
	:np:sp#9600:

#
# Weirdo special case for fast crt's with hardcopy devices
#
8|T9600|CRT with hardcopy:\
	:nx=T300:tc=9600-baud:
9|T300|CRT with hardcopy (300):\
	:nx=T9600:tc=300-baud:

#
# Plugboard, and misc other terminals
#
plug-9600|Plugboard-9600:\
	:pf#1:tc=9600-baud:
p|P9600|Plugboard-9600-rotary:\
	:pf#1:nx=P300:tc=9600-baud:
q|P300|Plugboard-300:\
	:pf#1:nx=P1200:tc=300-baud:
r|P1200|Plugboard-1200:\
	:pf#1:nx=P9600:tc=1200-baud:

#
# XXXX Port selector
#
s|DSW|Port Selector:\
	:ps:sp#2400:

#
# Auto-baud speed detect entry for Micom 600.
# Special code in getty will switch this out
# to one of the NNN-baud entries.
#
A|Auto-baud:\
	:ab:sp#2400:i0#04000:o0#0:c0#045400:l0#0: