Return to rc.conf CVS log

Up to [local] / src / etc

Add the nfs startup scripts.

ok robert@

#!/bin/sh -
#
#	$OpenBSD: rc.conf,v 1.149 2011/07/08 00:54:04 ajacoutot Exp $

# set these to "NO" to turn them off.  otherwise, they're used as flags
ldpd_flags=NO		# for normal use: ""
ripd_flags=NO		# for normal use: ""
mrouted_flags=NO	# for normal use: "", if activated
			# be sure to enable multicast_router below.
dvmrpd_flags=NO		# for normal use: ""
ospfd_flags=NO		# for normal use: ""
ospf6d_flags=NO		# for normal use: ""
bgpd_flags=NO		# for normal use: ""
rarpd_flags=NO		# for normal use: "-a"
bootparamd_flags=NO	# for normal use: ""
rbootd_flags=NO		# for normal use: ""
sshd_flags=""		# for normal use: ""
named_flags=NO		# for normal use: ""
nsd_flags=NO		# for normal use: ""
rdate_flags=NO		# for normal use: [RFC868-host] or [-n RFC2030-host]
ldattach_flags=NO	# for normal use: "[options] linedisc cua-device"
ntpd_flags=NO		# for normal use: ""
isakmpd_flags=NO	# for normal use: ""
iked_flags=NO		# for normal use: ""
sasyncd_flags=NO	# for normal use: ""
mopd_flags=NO		# for normal use: "-a"
apmd_flags=NO		# for normal use: ""
dhcpd_flags=NO		# for normal use: ""
dhcrelay_flags=NO	# for normal use: "-i interface [server]"
rtadvd_flags=NO		# for normal use: list of interfaces
			# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO	# for normal use: ""
			# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO		# for normal use: interface
			# be sure to set net.inet6.ip6.forwarding=0
			# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO		# for normal use: "" (or "-l" for debugging)
sensorsd_flags=NO	# for normal use: ""
hotplugd_flags=NO	# for normal use: ""
watchdogd_flags=NO	# for normal use: ""
ftpproxy_flags=NO	# for normal use: ""
hostapd_flags=NO	# for normal use: ""
ifstated_flags=NO	# for normal use: ""
relayd_flags=NO		# for normal use: ""
snmpd_flags=NO		# for normal use: ""
smtpd_flags=NO		# for normal use: ""
aucat_flags=NO		# for normal use: ""
ldapd_flags=NO		# for normal use: ""
inetd_flags=""		# for normal use: ""
rwhod_flags=NO		# for normal use: ""
portmap_flags=NO	# for normal use: ""
kdc_flags=NO		# for normal use: "" see 'info heimdal' for help
kadmind_flags=NO	# for normal use: ""
kpasswdd_flags=NO	# for normal use: ""
btd_flags=NO

# use -u to disable chroot, see httpd(8)
httpd_flags=NO		# for normal use: "" (or "-DSSL" after reading ssl(8))

# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"
spamd_flags=NO		# for normal use: "" and see spamd(8)
spamd_black=NO		# set to YES to run spamd without greylisting
spamlogd_flags=""	# use eg. "-i interface" and see spamlogd(8)

# Set to NO if ftpd is running out of inetd
ftpd_flags=NO		# for non-inetd use: "-D"

# Set to NO if identd is running out of inetd
identd_flags=NO		# for non-inetd use: "-b -elo"

# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO		# for normal use: ""

# For enabling console mouse support (i386 alpha amd64)
wsmoused_flags=NO	# for ps/2 or usb mice: "", serial: "-p /dev/cua00"

# set the following to "YES" to turn them on
amd=NO
pf=YES			# Packet filter / NAT
ipsec=NO		# IPsec
bt=NO			# Bluetooth
portmap=NO		# Note: inetd(8) rpc services need portmap too
check_quotas=YES	# NO may be desirable in some YP environments
accounting=NO		# process accounting (using /var/account/acct)

afs=NO			# mount and run afs

# Multicast routing configuration
# Please look at netstart(8) for a detailed description if you change these
multicast_host=NO	# Route all multicast packets to a single interface
multicast_router=NO	# A multicast routing daemon will be run, e.g. mrouted

# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags=			# "-z" to compress
ypserv_flags=NO			# add more flags, eg. -1 for YP v1, -d for DNS etc
yppasswdd_flags=NO		# "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags=NO			# for normal use: "-tun 4" and see nfsd(8)
mountd_flags=NO			# for normal use: ""
lockd_flags=NO			# for normal use: ""
statd_flags=NO			# for normal use: ""
amd_master=/etc/amd/master	# AMD 'master' map
syslogd_flags=			# add more flags, e.g. "-u -a /chroot/dev/log"
pf_rules=/etc/pf.conf		# Packet filter rules file
ipsec_rules=/etc/ipsec.conf	# IPsec rules file
bt_rules=/etc/bt.conf		# Bluetooth rules file
pflogd_flags=			# add more flags, e.g. "-s 256"
afsd_flags=			# Flags passed to afsd
shlib_dirs=			# extra directories for ldconfig, separated
				# by space

# rc.d(8) packages scripts
# started in the specified order and stopped in reverse order
rc_scripts=

local_rcconf="/etc/rc.conf.local"

unset inetd_flags rwhod_flags portmap_flags kdc_flags kadmind_flags
unset kpasswdd_flags btd_flags nfsd_flags mountd_flags lockd_flags
unset statd_flags

[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line

# backward compatibility
: ${inetd_flags=$([ X"${inetd-YES}" = XYES ] || echo NO)}
: ${rwhod_flags=$([ X"${rwhod-NO}" = XYES ] || echo NO)}
: ${portmap_flags=$([ X"${portmap-NO}" = XYES ] || echo NO)}
: ${kdc_flags=$([ X"${krb5_master_kdc-NO}" = XYES -o X"${krb5_slave_kdc-NO}" = XYES ] || echo NO)}
: ${kadmind_flags=$([ X"${krb5_master_kdc-NO}" = XYES ] || echo NO)}
: ${kpasswdd_flags=$([ X"${krb5_master_kdc-NO}" = XYES ] || echo NO)}
: ${btd_flags=$([ X"${bt-NO}" = XYES ] || echo NO)}
: ${nfsd_flags=$([ X"${nfs_server-NO}" = XYES ] && echo "-tun 4" || echo NO)}
: ${mountd_flags=$([ X"${nfs_server-NO}" = XYES ] || echo NO)}
: ${lockd_flags=$([ X"${lockd-NO}" = XYES ] || echo NO)}
: ${statd_flags=$([ X"${lockd-NO}" = XYES ] || echo NO)}