Return to rc.conf CVS log

Up to [local] / src / etc

Start on a basic ACPI framework -- does not do much more than read out the
ACPI tables into kernel memory and attach ACPI and HPET timers currently.

In order to test this code, enabling the devices in GENERIC as well as
the ACPI_ENABLE option is needed.  This code does not do any thermal
control yet, so this should be done with care depending on the platform.

In the tree so more people can contribute to making this more fully
featured.

Ok niklas@ grange@ tedu@

#!/bin/sh -
#
#	$OpenBSD: rc.conf,v 1.106 2005/06/02 20:09:38 tholo Exp $

# set these to "NO" to turn them off.  otherwise, they're used as flags
routed_flags=NO		# for normal use: "-q"
mrouted_flags=NO	# for normal use: "", if activated
			# be sure to enable multicast_router below.
ospfd_flags=NO		# for normal use: ""
bgpd_flags=NO		# for normal use: ""
rarpd_flags=NO		# for normal use: "-a"
bootparamd_flags=NO	# for normal use: ""
rbootd_flags=NO		# for normal use: ""
sshd_flags=""		# for normal use: ""
named_flags=NO		# for normal use: ""
rdate_flags=NO		# for normal use: [RFC868-host] or [-n RFC2030-host]
timed_flags=NO		# for normal use: ""
ntpd_flags=NO		# for normal use: ""
isakmpd_flags=NO	# for normal use: ""
mopd_flags=NO		# for normal use: "-a"
apmd_flags=NO		# for normal use: ""
acpid_flags=NO		# for normal use: ""
dhcpd_flags=NO		# for normal use: ""
rtadvd_flags=NO		# for normal use: list of interfaces
			# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO	# for normal use: ""
			# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO		# for normal use: interface
			# be sure to set net.inet6.ip6.forwarding=0
			# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO		# for normal use: "" (or "-l" for debugging)
sensorsd_flags=NO	# for normal use: ""
hotplugd_flags=NO	# for normal use: ""

# use -u to disable chroot, see httpd(8)
httpd_flags=NO		# for normal use: "" (or "-DSSL" after reading ssl(8))

# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"
spamd_flags=NO		# for normal use: "" and see spamd-setup(8)
spamd_grey=NO		# use spamd greylisting if YES
spamlogd_flags=""	# use eg. "-i interface" and see spamlogd(8)

# Set to NO if ftpd is running out of inetd
ftpd_flags=NO		# for non-inetd use: "-D"

# Set to NO if identd is running out of inetd
identd_flags=NO		# for non-inetd use: "-b -elo"

# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO		# for normal use: ""

# For enabling console mouse support (i386 and alpha only)
wsmoused_flags=NO	# for ps/2 or usb mice: "", serial: "-p /dev/cua00"

# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO		# see sysctl.conf for nfs client configuration
lockd=NO
amd=NO
pf=NO			# Packet filter / NAT
portmap=NO		# Note: inetd(8) rpc services need portmap too
inetd=YES		# almost always needed
check_quotas=YES	# NO may be desirable in some YP environments

krb5_master_kdc=NO	# KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO	# KerberosV slave KDC.
afs=NO			# mount and run afs

# Multicast routing configuration
# Please look at netstart(8) for a detailed description if you change these
multicast_host=NO	# Route all multicast packets to a single interface
multicast_router=NO	# A multicast routing daemon will be run, e.g. mrouted

# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags=			# "-z" to compress
ypserv_flags=			# E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags=NO		# "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4"		# Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt		# AMD's mount directory
amd_master=/etc/amd/master	# AMD 'master' map
syslogd_flags=			# add more flags, ie. "-u -a /chroot/dev/log"
pf_rules=/etc/pf.conf		# Packet filter rules file
pflogd_flags=			# add more flags, ie. "-s 256"
afsd_flags=			# Flags passed to afsd
shlib_dirs=			# extra directories for ldconfig, separated
				# by space

local_rcconf="/etc/rc.conf.local"

[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line