Return to route.4 CVS log

Up to [local] / src / share / man / man4

Give sppp(4) its own RTP_PROPOSAL priority

OK semarie@

.\"	$OpenBSD: route.4,v 1.56 2021/11/10 20:24:22 bket Exp $
.\"	$NetBSD: route.4,v 1.3 1994/11/30 16:22:31 jtc Exp $
.\"
.\" Copyright (c) 1990, 1991, 1993
.\"	The Regents of the University of California.  All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of the University nor the names of its contributors
.\"    may be used to endorse or promote products derived from this software
.\"    without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\"     @(#)route.4	8.6 (Berkeley) 4/19/94
.\"
.Dd $Mdocdate: November 10 2021 $
.Dt ROUTE 4
.Os
.Sh NAME
.Nm route
.Nd kernel packet forwarding database
.Sh SYNOPSIS
.In sys/socket.h
.In net/if.h
.In net/route.h
.Ft int
.Fn socket AF_ROUTE SOCK_RAW family
.Sh DESCRIPTION
.Ox
provides some packet routing facilities.
The kernel maintains a routing information database, which
is used in selecting the appropriate network interface when
transmitting packets.
.Pp
A user process (or possibly multiple co-operating processes)
maintains this database by sending messages over a special kind
of socket.
This supplants fixed size
.Xr ioctl 2 Ns 's
used in earlier releases.
Routing table changes may only be carried out by the super user.
.Pp
The operating system may spontaneously emit routing messages in response
to external events, such as receipt of a redirect, or failure to
locate a suitable route for a request.
The message types are described in greater detail below.
.Pp
Routing database entries come in two flavors: for a specific
host, or for all hosts on a generic subnetwork (as specified
by a bit mask and value under the mask).
The effect of wildcard or default route may be achieved by using
a mask of all zeros, and there may be hierarchical routes.
.Pp
When the system is booted and addresses are assigned
to the network interfaces, each protocol family
installs a routing table entry for each interface when it is ready for traffic.
Normally the protocol specifies the route
through each interface as a
.Dq direct
connection to the destination host
or network.
If the route is direct, the transport layer of a protocol family usually
requests the packet be sent to the same host specified in the packet.
Otherwise, the interface is requested to address the packet to the gateway
listed in the routing entry (i.e., the packet is forwarded).
.Pp
When routing a packet,
the kernel will attempt to find
the most specific route matching the destination.
(If there are two different mask and value-under-the-mask pairs
that match, the more specific is the one with more bits in the mask.
A route to a host is regarded as being supplied with a mask of
as many ones as there are bits in the destination.)
If no entry is found, the destination is declared to be unreachable,
and a routing\-miss message is generated if there are any
listeners on the routing control socket described below.
.Pp
If there are two identical destinations, the route priority acts as a
tie-breaker.
If there are multiple routes to the same destination,
the one with the lowest priority wins.
The kernel assigns certain default priorities based on the type of
route, as given in the table below.
For connected and static routes, this default priority is added to the
interface's priority.
.Pp
A wildcard routing entry is specified with a zero
destination address value and a mask of all zeroes.
Wildcard routes will be used
when the system fails to find other routes matching the
destination.
The combination of wildcard routes and routing redirects can provide
an economical mechanism for routing traffic.
Routes created by redirects from wildcard routes and other routes
will be marked
.Em cloned ,
until their
.Dq parent
from which they were created has disappeared.
.Pp
Route labels can be attached to routes and may contain arbitrary
information about the route.
Labels are sent over the routing socket (see below) as
.Vt sockaddr_rtlabel
structures.
.Ss The Routing Socket
One opens the channel for passing routing control messages
by using the
.Xr socket 2
call shown in the
.Sx SYNOPSIS
above.
.Pp
The
.Fa family
parameter may be
.Dv AF_UNSPEC ,
which will provide
routing information for all address families, or can be restricted
to a specific address family by specifying which one is desired.
There can be more than one routing socket open per system.
.Pp
Messages are formed by a header followed by a small
number of
.Vt sockaddr
structures (which are variable length),
interpreted by position, and delimited
by the length entry in the
.Vt sockaddr .
An example of a message with four addresses might be an
IPv4 route addition: the destination, netmask, gateway, and label,
since both netmasks and labels are sent over the routing socket as
.Vt sockaddr
structures.
The interpretation of which addresses are present is given by a
bit mask within the header, and the sequence is least significant
to most significant bit within the vector.
.Pp
Any messages sent to the kernel are returned, and copies are sent
to all interested listeners.
The kernel will provide the process ID
of the sender, and the sender may use an additional sequence
field to distinguish between outstanding messages.
However, message replies may be lost when kernel buffers are exhausted.
.Pp
The kernel may reject certain messages, and will indicate this
by filling in the
.Va rtm_errno
field.
The routing code returns
.Er EEXIST
if
requested to duplicate an existing entry,
.Er ESRCH
if
requested to delete a non-existent entry,
or
.Er ENOBUFS
if insufficient resources were available
to install a new route.
In the current implementation, all routing processes run locally,
and the values for
.Va rtm_errno
are available through the normal
.Va errno
mechanism, even if the routing reply message is lost.
.Pp
A process may avoid the expense of reading replies to
its own messages by issuing a
.Xr setsockopt 2
call indicating that the
.Dv SO_USELOOPBACK
option at the
.Dv SOL_SOCKET
level is to be turned off.
A process may ignore all messages from the routing socket
by doing a
.Xr shutdown 2
system call for further input.
.Pp
There are three filter options that can be used to restrict the received route messages
to a subset of all the route messages processed by the kernel:
.Pp
.Bl -tag -width xxxxxxxx -compact
.It ROUTE_TABLEFILTER
.It ROUTE_MSGFILTER
.It ROUTE_FLAGFILTER
.El
.Pp
A process can specify an alternate routing table by using the
.Dv ROUTE_TABLEFILTER
.Xr setsockopt 2 .
A value of
.Dv RTABLE_ANY
specifies all routing tables.
For example, to receive messages for routing table 5:
.Bd -literal -offset indent
unsigned int rdomain = 5;

if (setsockopt(routefd, AF_ROUTE, ROUTE_TABLEFILTER,
    &rdomain, sizeof(rdomain)) == -1)
	err(1, "setsockopt(ROUTE_TABLEFILTER)");
.Ed
.Pp
A process can specify which route message types it's interested in
by using
.Dv ROUTE_FILTER(int type)
and issuing a setsockopt call with the
.Dv ROUTE_MSGFILTER
option at the
.Dv AF_ROUTE
level.
For example, to only get interface specific messages:
.Bd -literal -offset indent
unsigned int rtfilter;

rtfilter = ROUTE_FILTER(RTM_IFINFO) |
    ROUTE_FILTER(RTM_IFANNOUNCE);

if (setsockopt(routefd, AF_ROUTE, ROUTE_MSGFILTER,
    &rtfilter, sizeof(rtfilter)) == -1)
	err(1, "setsockopt(ROUTE_MSGFILTER)");
.Ed
.Pp
Similarly, a process can specify that it is only interested in messages
relating to routes where the priority is no more than a certain value
by issuing a setsockopt call with the
.Dv ROUTE_PRIOFILTER
option.
For example, to select only local, directly connected and static routes:
.Bd -literal -offset indent
unsigned int maxprio = RTP_STATIC;

if (setsockopt(routefd, AF_ROUTE, ROUTE_PRIOFILTER,
    &maxprio, sizeof(maxprio)) == -1)
	err(1, "setsockopt(ROUTE_PRIOFILTER)");
.Ed
.Pp
The
.Dv ROUTE_FLAGFILTER
socket option can be used to exclude a subset of
.Vt rtm_flags
flags from the received route messages:
.Bd -literal -offset indent
int rtfilter = RTF_LLINFO | RTF_BROADCAST;

if (setsockopt(routefd, AF_ROUTE, ROUTE_FLAGFILTER, &rtfilter,
    sizeof(rtfilter)) == -1)
	err(1, "setsockopt(ROUTE_FLAGFILTER)");
.Ed
.Pp
The predefined constants for the routing priorities are:
.Bd -literal
#define RTP_NONE	0	/* unset priority use sane default */
#define RTP_LOCAL	1	/* local address routes (must be the highest) */
#define RTP_CONNECTED	4	/* directly connected routes */
#define RTP_STATIC	8	/* static routes base priority */
#define RTP_EIGRP	28	/* EIGRP routes */
#define RTP_OSPF	32	/* OSPF routes */
#define RTP_ISIS	36	/* IS-IS routes */
#define RTP_RIP		40	/* RIP routes */
#define RTP_BGP		48	/* BGP routes */
#define RTP_DEFAULT	56	/* routes that have nothing set */
#define RTP_PROPOSAL_STATIC	57
#define RTP_PROPOSAL_DHCLIENT	58
#define RTP_PROPOSAL_SLAAC	59
#define RTP_PROPOSAL_UMB	60
#define RTP_PROPOSAL_PPP	61
#define RTP_PROPOSAL_SOLICIT	62	/* request reply of all RTM_PROPOSAL */
#define RTP_MAX		63	/* maximum priority */
#define RTP_ANY		64	/* any of the above */
#define RTP_MASK	0x7f
#define RTP_DOWN	0x80	/* route/link is down */
.Ed
.Pp
If a route is in use when it is deleted,
the routing entry will be marked down and removed from the routing table,
but the resources associated with it will not
be reclaimed until all references to it are released.
User processes can obtain information about the routing
entry to a specific destination by using a
.Dv RTM_GET
message or via the
.Dv PF_ROUTE
.Xr sysctl 2 .
.Pp
Messages include:
.Bd -literal
#define RTM_ADD		0x1	/* Add Route */
#define RTM_DELETE	0x2	/* Delete Route */
#define RTM_CHANGE	0x3	/* Change Metrics or flags */
#define RTM_GET		0x4	/* Report Metrics */
#define RTM_LOSING	0x5	/* Kernel Suspects Partitioning */
#define RTM_REDIRECT	0x6	/* Told to use different route */
#define RTM_MISS	0x7	/* Lookup failed on this address */
#define RTM_RESOLVE	0xb	/* req to resolve dst to LL addr */
#define RTM_NEWADDR	0xc	/* address being added to iface */
#define RTM_DELADDR	0xd	/* address being removed from iface */
#define RTM_IFINFO	0xe	/* iface going up/down etc. */
#define RTM_IFANNOUNCE	0xf	/* iface arrival/departure */
#define RTM_DESYNC	0x10	/* route socket buffer overflow */
#define RTM_INVALIDATE	0x11	/* Invalidate cache of L2 route */
.Ed
.Pp
A message header consists of one of the following:
.Bd -literal
struct rt_msghdr {
	u_short	rtm_msglen;	/* to skip over non-understood messages */
	u_char	rtm_version;	/* future binary compatibility */
	u_char	rtm_type;	/* message type */
	u_short	rtm_hdrlen;	/* sizeof(rt_msghdr) to skip over the header */
	u_short	rtm_index;	/* index for associated ifp */
	u_short rtm_tableid;	/* routing table id */
	u_char	rtm_priority;	/* routing priority */
	u_char	rtm_mpls;	/* MPLS additional infos */
	int	rtm_addrs;	/* bitmask identifying sockaddrs in msg */
	int	rtm_flags;	/* flags, incl. kern & message, e.g. DONE */
	int	rtm_fmask;	/* bitmask used in RTM_CHANGE message */
	pid_t	rtm_pid;	/* identify sender */
	int	rtm_seq;	/* for sender to identify action */
	int	rtm_errno;	/* why failed */
	u_int	rtm_inits;	/* which metrics we are initializing */
	struct	rt_metrics rtm_rmx; /* metrics themselves */
};

struct if_msghdr {
	u_short	ifm_msglen;	/* to skip over non-understood messages */
	u_char	ifm_version;	/* future binary compatibility */
	u_char	ifm_type;	/* message type */
	u_short ifm_hdrlen;	/* sizeof(if_msghdr) to skip over the header */
	u_short	ifm_index;	/* index for associated ifp */
	u_short	ifm_tableid;	/* routing table id */
	u_char	ifm_pad1;
	u_char	ifm_pad2;
	int	ifm_addrs;	/* like rtm_addrs */
	int	ifm_flags;	/* value of if_flags */
	int	ifm_xflags;
	struct	if_data ifm_data;/* statistics and other data about if */
};

struct ifa_msghdr {
	u_short	ifam_msglen;	/* to skip over non-understood messages */
	u_char	ifam_version;	/* future binary compatibility */
	u_char	ifam_type;	/* message type */
	u_short ifam_hdrlen;	/* sizeof(ifa_msghdr) to skip over the header */
	u_short	ifam_index;	/* index for associated ifp */
	u_short	ifam_tableid;	/* routing table id */
	u_char	ifam_pad1;
	u_char	ifam_pad2;
	int	ifam_addrs;	/* like rtm_addrs */
	int	ifam_flags;	/* value of ifa_flags */
	int	ifam_metric;	/* value of ifa_metric */
};

struct if_announcemsghdr {
	u_short	ifan_msglen;	/* to skip over non-understood messages */
	u_char	ifan_version;	/* future binary compatibility */
	u_char	ifan_type;	/* message type */
	u_short ifan_hdrlen;	/* sizeof(ifa_msghdr) to skip over the header */
	u_short	ifan_index;	/* index for associated ifp */
	u_short	ifan_what;	/* what type of announcement */
	char	ifan_name[IFNAMSIZ];	/* if name, e.g. "en0" */
};
.Ed
.Pp
The
.Dv RTM_IFINFO
message uses an
.Vt if_msghdr
header, the
.Dv RTM_NEWADDR
and
.Dv RTM_DELADDR
messages use an
.Vt ifa_msghdr
header,
the
.Dv RTM_IFANNOUNCE
message uses an
.Vt if_announcemsghdr
header,
.Dv RTM_INVALIDATE
is used only internally in the kernel and should never appear in a route
message,
and all other messages use the
.Vt rt_msghdr
header.
.Pp
The metrics structure is:
.Bd -literal
struct rt_metrics {
	u_int64_t	rmx_pksent;	/* packets sent using this route */
	int64_t		rmx_expire;	/* lifetime for route, e.g. redirect */
	u_int		rmx_locks;	/* Kernel must leave these values */
	u_int		rmx_mtu;	/* MTU for this path */
	u_int		rmx_refcnt;	/* # references hold */
	u_int		rmx_hopcount;	/* max hops expected */
	u_int		rmx_recvpipe;	/* inbound delay-bandwidth product */
	u_int		rmx_sendpipe;	/* outbound delay-bandwidth product */
	u_int		rmx_ssthresh;	/* outbound gateway buffer limit */
	u_int		rmx_rtt;	/* estimated round trip time */
	u_int		rmx_rttvar;	/* estimated rtt variance */
	u_int		rmx_pad;
};
.Ed
.Pp
Only
.Va rmx_mtu , rmx_expire , rmx_pksent ,
and
.Va rmx_locks
are used by the kernel routing table.
All other values will be ignored when inserting them into the kernel and are
set to zero in routing messages sent by the kernel.
They are left for compatibility reasons with other systems.
.Pp
Flags include the values:
.Bd -literal
#define	RTF_UP        0x1       /* route usable */
#define	RTF_GATEWAY   0x2       /* destination is a gateway */
#define	RTF_HOST      0x4       /* host entry (net otherwise) */
#define	RTF_REJECT    0x8       /* host or net unreachable */
#define	RTF_DYNAMIC   0x10      /* created dynamically (by redirect) */
#define	RTF_MODIFIED  0x20      /* modified dynamically (by redirect) */
#define	RTF_DONE      0x40      /* message confirmed */
#define	RTF_CLONING   0x100     /* generate new routes on use */
#define	RTF_MULTICAST 0x200     /* route associated to a mcast addr.  */
#define	RTF_LLINFO    0x400     /* generated by ARP or NDP */
#define	RTF_STATIC    0x800     /* manually added */
#define	RTF_BLACKHOLE 0x1000    /* just discard pkts (during updates) */
#define	RTF_PROTO3    0x2000    /* protocol specific routing flag */
#define	RTF_PROTO2    0x4000    /* protocol specific routing flag */
#define	RTF_PROTO1    0x8000    /* protocol specific routing flag */
#define	RTF_CLONED    0x10000   /* this is a cloned route */
#define RTF_MPATH     0x40000   /* multipath route or operation */
#define RTF_MPLS      0x100000  /* MPLS additional infos */
#define RTF_LOCAL     0x200000	/* route to a local address */
#define RTF_BROADCAST 0x400000	/* route associated to a bcast addr. */
#define RTF_CONNECTED 0x800000	/* interface route */
.Ed
.Pp
The following flags (defined as
.Dv RTF_FMASK )
can be changed by an RTM_CHANGE request:
.Dv RTF_LLINFO ,
.Dv RTF_PROTO1 ,
.Dv RTF_PROTO2 ,
.Dv RTF_PROTO3 ,
.Dv RTF_BLACKHOLE ,
.Dv RTF_REJECT ,
.Dv RTF_STATIC
and
.Dv RTF_MPLS .
.Pp
Specifiers for metric values in
.Va rmx_locks
and
.Va rtm_inits
are:
.Bd -literal
#define RTV_MTU		0x1	/* init or lock _mtu */
#define RTV_HOPCOUNT	0x2	/* init or lock _hopcount */
#define RTV_EXPIRE	0x4	/* init or lock _expire */
#define RTV_RPIPE	0x8	/* init or lock _recvpipe */
#define RTV_SPIPE	0x10	/* init or lock _sendpipe */
#define RTV_SSTHRESH	0x20	/* init or lock _ssthresh */
#define RTV_RTT		0x40	/* init or lock _rtt */
#define RTV_RTTVAR	0x80	/* init or lock _rttvar */
.Ed
.Pp
Only
.Dv RTV_MTU
and
.Dv RTV_EXPIRE
should be used; all other flags are ignored.
.Pp
Specifiers for which addresses are present in the messages are:
.Bd -literal
#define RTA_DST		0x1	/* destination sockaddr present */
#define RTA_GATEWAY	0x2	/* gateway sockaddr present */
#define RTA_NETMASK	0x4	/* netmask sockaddr present */
#define RTA_IFP		0x10	/* interface name sockaddr present */
#define RTA_IFA		0x20	/* interface addr sockaddr present */
#define RTA_AUTHOR	0x40	/* sockaddr for author of redirect */
#define RTA_BRD		0x80	/* for NEWADDR, bcast or p-p dest addr */
#define RTA_SRC		0x100	/* source sockaddr present */
#define RTA_SRCMASK	0x200	/* source netmask present */
#define RTA_LABEL	0x400	/* route label present */
.Ed
.Sh SEE ALSO
.Xr netstat 1 ,
.Xr socket 2 ,
.Xr sysctl 2 ,
.Xr rtable 4 ,
.Xr mygate 5 ,
.Xr route 8 ,
.Xr route 9
.Sh HISTORY
A
.Dv PF_ROUTE
protocol family first appeared in
.Bx 4.3 Reno .