=================================================================== RCS file: /cvsrepo/anoncvs/cvs/src/share/mk/bsd.port.mk,v retrieving revision 1.92 retrieving revision 1.93 diff -u -r1.92 -r1.93 --- src/share/mk/bsd.port.mk 1999/05/23 22:45:15 1.92 +++ src/share/mk/bsd.port.mk 1999/05/25 20:44:23 1.93 @@ -1,2472 +1,4 @@ -#-*- mode: Fundamental; tab-width: 4; -*- -# ex:ts=4 -# $OpenBSD: bsd.port.mk,v 1.92 1999/05/23 22:45:15 brad Exp $ -# $FreeBSD: bsd.port.mk,v 1.264 1996/12/25 02:27:44 imp Exp $ -# $NetBSD: bsd.port.mk,v 1.62 1998/04/09 12:47:02 hubertf Exp $ -# -# bsd.port.mk - 940820 Jordan K. Hubbard. -# This file is in the public domain. -# -# Please view me with 4 column tabs! +PORTSDIR?= /usr/ports +.include "${PORTSDIR}/infrastructure/mk/bsd.port.mk" -# There are two different types of "maintainers" in the whole ports -# framework concept. Maintainers of the bsd.port*.mk files -# are listed below in the ${OPSYS}_MAINTAINER entries (this file -# is used by multiple *BSD flavors). You should consult them directly -# if you have any questions/suggestions regarding this file since only -# they are allowed to modify the master copies in the CVS repository! - -# For each port, the MAINTAINER variable is what you should consult for -# contact information on the person(s) to contact if you have questions/ -# suggestions about that specific port. By default (if no MAINTAINER -# is listed), a port is maintained by the subscribers of the ports@openbsd.org -# mailing list, and any correspondence should be directed there. -# -OpenBSD_MAINTAINER= ports-admin@openbsd.org - -# NEED_VERSION: we need at least this version of bsd.port.mk for this -# port to build - -FULL_REVISION=$$OpenBSD: bsd.port.mk,v 1.92 1999/05/23 22:45:15 brad Exp $$ -.if defined(NEED_VERSION) -_VERSION_REVISION=${FULL_REVISION:M[0-9]*.*} - -_VERSION=${_VERSION_REVISION:C/\..*//} -_REVISION=${_VERSION_REVISION:C/.*\.//} - -_VERSION_NEEDED=${NEED_VERSION:C/\..*//} -_REVISION_NEEDED=${NEED_VERSION:C/.*\.//} - -.BEGIN: - @if [ ${_VERSION_NEEDED} -gt ${_VERSION} -o \ - ${_VERSION_NEEDED} -eq ${_VERSION} -a \ - ${_REVISION_NEEDED} -gt ${_REVISION} ]; \ - then \ - ${ECHO} "Need version ${NEED_VERSION} of bsd.port.mk"; \ - ${FALSE}; \ - fi; - -.endif - -# Supported Variables and their behaviors: -# -# Variables that typically apply to all ports: -# -# ONLY_FOR_ARCHS - If a port only makes sense to certain architectures, this -# is a list containing the names for them. It is checked -# against the predefined ${MACHINE_ARCH} value -# ARCH - The architecture (default: "uname -m"). -# OPSYS - The operating system (default: "uname -s"). -# OPSYS_VER - The current version of the operating system -# (default: "uname -r"). -# PORTSDIR - The root of the ports tree. Defaults: /usr/ports -# DISTDIR - Where to get gzip'd, tarballed copies of original sources. -# (default: ${PORTSDIR}/distfiles). -# PREFIX - Where to install things in general (default: /usr/local). -# MASTER_SITES - Primary location(s) for distribution files if not found -# locally. -# MASTER_SITE_SUBDIR - Directory that "%SUBDIR%" in MASTER_SITES is -# replaced by. -# PATCH_SITES - Primary location(s) for distribution patch files -# (see PATCHFILES below) if not found locally. -# PATCH_SITE_SUBDIR - Directory that "%SUBDIR%" in PATCH_SITES is -# replaced by. -# -# MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch -# files if not found locally and ${MASTER_SITES}/${PATCH_SITES} -# (default: -# ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/${DIST_SUBDIR}/ -# ftp://ftp.openbsd.org/pub/OpenBSD/licensed/${DIST_SUBDIR}/ -# ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/) -# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this -# value. -# MASTER_SITE_OPENBSD - If set, only use ftp.openbsd.org as the -# MASTER_SITE_OVERRIDE. -# PACKAGES - A top level directory where all packages go (rather than -# going locally to each port). (default: ${PORTSDIR}/packages). -# GMAKE - Set to path of GNU make if not in $PORTPATH (default: gmake). -# XMKMF - Set to path of `xmkmf' if not in $PORTPATH -# (default: xmkmf -a ). -# MAINTAINER - The e-mail address of the contact person for this port -# Defaults: ports@OpenBSD.ORG -# CATEGORIES - A list of descriptive categories into which this port falls. -# WRKOBJDIR - A top level directory where, if defined, the separate working -# directories will get created, and symbolically linked to from -# ${WRKDIR} (see below). This is useful for building ports on -# several architectures, then ${PORTSDIR} can be NFS-mounted -# while ${WRKOBJDIR} is local to every arch -# PREFERRED_CIPHERS -# - a list of the form cipher.sig of programs to use to check -# recorded checksums, in order of decreasing trust. -# (default to using sha1, then rmd160, then md5). -# -# Variables that typically apply to an individual port. Non-Boolean -# variables without defaults are *mandatory*. -# -# WRKDIR - A temporary working directory that gets *clobbered* on clean -# (default: ${.CURDIR}/work). -# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually -# unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless -# NO_WRKSUBDIR is set, in which case simply ${WRKDIR}). -# WRKBUILD - The directory where the port is actually built, useful for -# ports that need a separate directory (default: ${WRKSRC}). -# This is intended for GNU configure. -# SEPARATE_BUILD -# - define if the port can build in directory separate from -# WRKSRC. This redefines WRKBUILD to be arch-dependent, -# along with the configure, build and install cookies -# DISTNAME - Name of port or distribution. -# DISTFILES - Name(s) of archive file(s) containing distribution -# (default: ${DISTNAME}${EXTRACT_SUFX}). -# SUPDISTFILES - Names of supplementary archive files that don't get -# used all the time (default: empty). -# PATCHFILES - Name(s) of additional files that contain distribution -# patches (default: none). make will look for them at -# PATCH_SITES (see above). They will automatically be -# uncompressed before patching if the names end with -# ".gz" or ".Z". -# SUPPATCHFILES - Names of supplementary patch files that don't get -# used all the time (default: empty). -# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES} -# and ${PATCHFILES} will be put in this subdirectory of -# ${DISTDIR}. Also they will be fetched in this subdirectory -# from FreeBSD mirror sites. -# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}. -# MIRROR_DISTFILE - Whether the distfile is redistributable without restrictions. -# Defaults to "yes", set this to "no" if restrictions exist. -# IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set -# this variable to their names. -# PKGNAME - Name of the package file to create if the DISTNAME -# isn't really relevant for the port/package -# (default: ${DISTNAME}). -# EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to -# actually extract. -# PATCHDIR - A directory containing any additional patches you made -# to port this software to OpenBSD (default: -# ${.CURDIR}/patches) -# PATCH_LIST - list of patches to apply, can include wildcards (default: -# patch-*) -# SCRIPTDIR - A directory containing any auxiliary scripts -# (default: ${.CURDIR}/scripts) -# FILESDIR - A directory containing any miscellaneous additional files. -# (default: ${.CURDIR}/files) -# PKGDIR - A direction containing any package creation files. -# (default: ${.CURDIR}/pkg) -# PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg) -# FORCE_PKG_REGISTER - If set, it will overwrite any existing package -# registration information in ${PKG_DBDIR}/${PKGNAME}. -# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from -# the "install" target. -# MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist -# if USE_IMAKE or USE_X11 is set, /etc/mtree/BSD.local.dist -# otherwise.) -# COMES_WITH - The first version that a port was made part of the -# standard OpenBSD distribution. If the current OpenBSD -# version is >= this version then a notice will be -# displayed instead the port being generated. -# -# NO_BUILD - Use a dummy (do-nothing) build target. -# NO_CONFIGURE - Use a dummy (do-nothing) configure target. -# NO_CDROM - Port may not go on CDROM. Set this string to reason. -# NO_DESCRIBE - Use a dummy (do-nothing) describe target. -# NO_EXTRACT - Use a dummy (do-nothing) extract target. -# NO_INSTALL - Use a dummy (do-nothing) install target. -# NO_PACKAGE - Use a dummy (do-nothing) package target. -# NO_PKG_REGISTER - Don't register a port install as a package. -# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}. -# NO_WRKDIR - There's no work directory at all; port does this someplace -# else. -# NO_DEPENDS - Don't verify build of dependencies. -# NOCLEANDEPENDS - Don't nuke dependent dirs on make clean (Default: yes) -# BROKEN - Port is broken. Set this string to the reason why. -# RESTRICTED - Port is restricted. Set this string to the reason why. -# USE_BZIP2 - Port distfiles use bzip2 instead of gzip for compression. -# USE_ZIP - Port distfiles use zip instead of tar for packaging. -# USE_GMAKE - Port uses gmake. -# USE_LIBTOOL - Port uses libtool. -# -# XXX: cygnus products do NOT use autoconf for making its main -# configure from configure.in -# USE_AUTOCONF - Port uses autoconf (implies GNU_CONFIGURE). -# AUTOCONF_DIR - Where to apply autoconf (default: ${WRKSRC}). -# USE_PERL5 - Port uses perl5 for building and running. -# USE_IMAKE - Port uses imake. -# USE_X11 - Port uses X11 and installs in ${X11BASE} -# USE_EGCC - Port needs the egcs C compiler -# USE_EGXX - Port needs the egcs C++ compiler -# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man -# target. -# HAS_CONFIGURE - Says that the port has its own configure script. -# GNU_CONFIGURE - Set if you are using GNU configure (optional). -# CONFIGURE_SCRIPT - Name of configure script, defaults to 'configure'. -# CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set. -# CONFIGURE_SHARED - An argument to GNU configure that expands to -# --enable-shared for those architectures that support -# shared libraries and --disable-shared for architectures -# that do not support shared libraries. -# LIBTOOL_FLAGS - Pass these flags in ${CONFIGURE} and ${MAKE} environment so -# to be used as args by libtool. -# CONFIGURE_ENV - Pass these env (shell-like) to configure if -# ${HAS_CONFIGURE} is set. -# SCRIPTS_ENV - Additional environment vars passed to scripts in -# ${SCRIPTDIR} executed by bsd.port.mk. -# MAKE_ENV - Additional environment vars passed to sub-make in build -# stage. -# IS_INTERACTIVE - Set this if your port needs to interact with the user -# during a build. User can then decide to skip this port by -# setting ${BATCH}, or compiling only the interactive ports -# by setting ${INTERACTIVE}. -# FETCH_DEPENDS - A list of "path:dir" pairs of other ports this -# package depends in the "fetch" stage. "path" is the -# name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the -# existence (if it is a full pathname) or search for -# it in $PORTPATH (if it is an executable) and go -# into "dir" to do a "make all install" if it's not -# found. -# BUILD_DEPENDS - A list of "path:dir" pairs of other ports this -# package depends to build (between the "extract" and -# "build" stages, inclusive). The test done to -# determine the existence of the dependency is the -# same as FETCH_DEPENDS. -# RUN_DEPENDS - A list of "path:dir" pairs of other ports this -# package depends to run. The test done to determine -# the existence of the dependency is the same as -# FETCH_DEPENDS. This will be checked during the -# "install" stage and the name of the dependency will -# be put into the package as well. -# LIB_DEPENDS - A list of "lib:dir" pairs of other ports this package -# depends on. "lib" is the name of a shared library. -# make will use "ldconfig -r" to search for the -# library. Note that lib can be any regular expression. -# In older versions of this file, you need two backslashes -# in front of dots (.) to supress its special meaning (e.g., -# use "foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*"). -# No special backslashes are needed to escape regular -# expression metacharacters in OpenBSD, and the old backslash -# escapes are recognised for backwards compatibility. -# DEPENDS - A list of other ports this package depends on being -# made first. Use this for things that don't fall into -# the above two categories. -# -# EXTRACT_CMD - Command for extracting archives (default: "gzip", -# "bzip2" if USE_BZIP2, "unzip" if USE_ZIP). -# EXTRACT_SUFX - Suffix for archive files (default: ".tar.gz", -# ".tar.bz2" if USE_BZIP2, ".zip" if USE_ZIP). -# EXTRACT_BEFORE_ARGS -# - Arguments to ${EXTRACT_CMD} before filename -# (default: "-dc" for gzip or bzip2, "-q" for unzip) -# EXTRACT_AFTER_ARGS -# - Arguments to ${EXTRACT_CMD} following filename -# (default: "| ${TAR} -xf -", or "-d ${WKRDIR}" if USE_ZIP). -# -# FETCH_CMD - Full path to ftp/http fetch command if not in $PORTPATH -# (default: /usr/bin/ftp). -# FETCH_BEFORE_ARGS - -# Arguments to ${FETCH_CMD} before filename (default: none). -# FETCH_AFTER_ARGS - -# Arguments to ${FETCH_CMD} following filename (default: none). -# NO_IGNORE - Set this to YES (most probably in a "make fetch" in -# ${PORTSDIR}) if you want to fetch all distfiles, -# even for packages not built due to limitation by -# absent X or Motif or ONLY_FOR_ARCHS... -# NO_WARNINGS - Set this to YES to disable warnings regarding variables -# to define to control the build. Automatically set -# from the "mirror-distfiles" target. -# ALL_TARGET - The target to pass to make in the package when building. -# (default: "all") -# INSTALL_TARGET- The target to pass to make in the package when installing. -# (default: "install") -# -# Motif support: -# -# USE_MOTIF - Set this in your port if it requires Motif or Lesstif. -# It will be built using Lesstif port unless Motif libraries -# found or HAVE_MOTIF is defined. See also REQUIRES_MOTIF. -# -# REQUIRES_MOTIF- Set this in your port if it requires Motif. It will be -# built only if HAVE_MOTIF is set. -# HAVE_MOTIF - If set, means system has Motif. Typically set in /etc/mk.conf. -# MOTIF_STATIC - If set, link libXm statically; otherwise, link it -# dynamically. Typically set in /etc/mk.conf. -# MOTIFLIB - Set automatically to appropriate value depending on -# ${MOTIF_STATIC}. Substitute references to -lXm with -# patches to make your port conform to our standards. -# MOTIF_ONLY - If set, build Motif ports only. (Not much use except for -# building packages.) -# -# Variables to change if you want a special behavior: -# -# ECHO_MSG - Used to print all the '===>' style prompts - override this -# to turn them off (default: /bin/echo). -# DEPENDS_TARGET - The target to execute when a port is calling a -# dependency (default: "install"). -# PATCH_DEBUG - If set, print out more information about the patches as -# it attempts to apply them. -# -# Variables that serve as convenient "aliases" for your *-install targets. -# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin". -# -# INSTALL_PROGRAM - A command to install binary executables. -# INSTALL_SCRIPT - A command to install executable scripts. -# INSTALL_DATA - A command to install sharable data. -# INSTALL_MAN - A command to install manpages (doesn't compress). -# INSTALL_PROGRAM_DIR - Create a directory for storing programs -# INSTALL_SCRIPT_DIR - Create a directory for storing scripts (alias for -# (INSTALL_PROGRAM_DIR) -# INSTALL_DATA_DIR - Create a directory for storing arbitrary data -# INSTALL_MAN_DIR - Create a directory for storing man pages -# -# It is assumed that the port installs manpages uncompressed. If this is -# not the case, set MANCOMPRESSED in the port and define MAN and -# CAT for the compressed pages. The pages will then be automagically -# uncompressed. -# -# MANCOMPRESSED - Indicates that the port installs manpages in a compressed -# form (default: port installs manpages uncompressed). -# MAN - A list of manpages, categorized by section. For -# example, if your port has "man/man1/foo.1" and -# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n". -# The available sections chars are "123456789LN". -# CAT - The same as MAN, only for formatted manpages. -# MANPREFIX -The directory prefix for ${MAN} (default: ${PREFIX}). -# CATPREFIX - The directory prefix for ${CAT} (default: ${PREFIX}). -# -# Other variables: -# -# NO_SHARED_LIBS - defined as "yes" for those machine architectures that do -# not support shared libraries. WARNING: This value is -# NOT defined until AFTER ".include bsd.port.mk". Thus -# you can NOT use something like ".if defined(NO_SHARED_LIBS)" -# before this file is included. -# -# Default targets and their behaviors: -# -# fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined) -# into ${DISTDIR} as necessary. -# fetch-list - Show list of files that would be retrieved by fetch -# extract - Unpacks ${DISTFILES} into ${WRKDIR}. -# patch - Apply any provided patches to the source. -# configure - Runs either GNU configure, one or more local configure -# scripts or nothing, depending on what's available. -# build - Actually compile the sources. -# install - Install the results of a build. -# reinstall - Install the results of a build, ignoring "already installed" -# flag. -# deinstall - Remove the installation. Alias: uninstall -# plist - create a file suitable for use as a packing list. This -# is for port maintainers. -# package - Create a package from an _installed_ port. -# describe - Try to generate a one-line description for each port for -# use in INDEX files and the like. -# checkpatch - Do a "patch -C" instead of a "patch". Note that it may -# give incorrect results if multiple patches deal with -# the same file. -# checksum - Use ${CHECKSUM_FILE} to ensure that your distfiles are valid. -# makesum - Generate ${CHECKSUM_FILE} (only do this for your own ports!). -# addsum - update ${CHECKSUM_FILE} in a non-destructive way -# (your own ports only!) -# readme - Create a README.html file describing the category or package -# mirror-distfiles - Mirror the distfile(s) if they are freely redistributable -# Setting MIRROR_DISTFILE to "no" in the package Makefile -# will override the default "yes", and the distfile will -# not be fetched. -# list-distfiles- list the distribution and patch files used by a port. -# Typical use is (from the top level of the ports tree) -# make ECHO_MSG=: list-distfiles | tee some-file -# obj - pre-build ${WRKDIR} -> ${WRKOBJDIR}/${PORTSUBDIR} links -# print-depends - print all dependencies for the given package -# -# Default sequence for "all" is: fetch checksum extract patch configure build -# -# Please read the comments in the targets section below, you -# should be able to use the pre-* or post-* targets/scripts -# (which are available for every stage except checksum) or -# override the do-* targets to do pretty much anything you want. -# -# NEVER override the "regular" targets unless you want to open -# a major can of worms. - -# Get the architecture -ARCH!= uname -m - -# Get the operating system type and version -OPSYS!= uname -s -OPSYS_VER!= uname -r - -.if exists(${.CURDIR}/../Makefile.inc) -.include "${.CURDIR}/../Makefile.inc" -.endif - -# Define SUPPORT_SHARES for those machines that support shared libraries. -# -.if (${MACHINE_ARCH} == "alpha") || (${MACHINE_ARCH} == "powerpc") || \ - (${MACHINE_ARCH} == "vax") || (${MACHINE_ARCH} == "hppa") -NO_SHARED_LIBS= yes -.endif - -NOCLEANDEPENDS= yes -NOMANCOMPRESS?= yes -DEF_UMASK?= 022 - -.if exists(${.CURDIR}/Makefile.${ARCH}-${OPSYS}) -.include "${.CURDIR}/Makefile.${ARCH}-${OPSYS}" -.elif exists(${.CURDIR}/Makefile.${OPSYS}) -.include "${.CURDIR}/Makefile.${OPSYS}" -.elif exists(${.CURDIR}/Makefile.${ARCH}) -.include "${.CURDIR}/Makefile.${ARCH}" -.endif - -# These need to be absolute since we don't know how deep in the ports -# tree we are and thus can't go relative. They can, of course, be overridden -# by individual Makefiles or local system make configuration. -PORTSDIR?= /usr/ports -LOCALBASE?= ${DESTDIR}/usr/local -X11BASE?= ${DESTDIR}/usr/X11R6 -DISTDIR?= ${PORTSDIR}/distfiles -_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR} -PACKAGES?= ${PORTSDIR}/packages -TEMPLATES?= ${PORTSDIR}/templates - -.if exists(${.CURDIR}/patches.${ARCH}-${OPSYS}) -PATCHDIR?= ${.CURDIR}/patches.${ARCH}-${OPSYS} -.elif exists(${.CURDIR}/patches.${OPSYS}) -PATCHDIR?= ${.CURDIR}/patches.${OPSYS} -.elif exists(${.CURDIR}/patches.${ARCH}) -PATCHDIR?= ${.CURDIR}/patches.${ARCH} -.else -PATCHDIR?= ${.CURDIR}/patches -.endif - -PATCH_LIST?= patch-* - -.if exists(${.CURDIR}/scripts.${ARCH}-${OPSYS}) -SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH}-${OPSYS} -.elif exists(${.CURDIR}/scripts.${OPSYS}) -SCRIPTDIR?= ${.CURDIR}/scripts.${OPSYS} -.elif exists(${.CURDIR}/scripts.${ARCH}) -SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH} -.else -SCRIPTDIR?= ${.CURDIR}/scripts -.endif - -.if exists(${.CURDIR}/files.${ARCH}-${OPSYS}) -FILESDIR?= ${.CURDIR}/files.${ARCH}-${OPSYS} -.elif exists(${.CURDIR}/files.${OPSYS}) -FILESDIR?= ${.CURDIR}/files.${OPSYS} -.elif exists(${.CURDIR}/files.${ARCH}) -FILESDIR?= ${.CURDIR}/files.${ARCH} -.else -FILESDIR?= ${.CURDIR}/files -.endif - -.if exists(${.CURDIR}/pkg.${ARCH}-${OPSYS}) -PKGDIR?= ${.CURDIR}/pkg.${ARCH}-${OPSYS} -.elif exists(${.CURDIR}/pkg.${OPSYS}) -PKGDIR?= ${.CURDIR}/pkg.${OPSYS} -.elif exists(${.CURDIR}/pkg.${ARCH}) -PKGDIR?= ${.CURDIR}/pkg.${ARCH} -.else -PKGDIR?= ${.CURDIR}/pkg -.endif - -.if defined(USE_IMAKE) || defined(USE_X11) -PREFIX?= ${X11BASE} -.else -PREFIX?= ${LOCALBASE} -.endif - -# where configuration files should go -SYSCONFDIR?= /etc -# The following 4 lines should go away as soon as the ports are all updated -.if defined(EXEC_DEPENDS) -BUILD_DEPENDS+= ${EXEC_DEPENDS} -RUN_DEPENDS+= ${EXEC_DEPENDS} -.endif -.if defined(USE_GMAKE) -BUILD_DEPENDS+= ${GMAKE}:${PORTSDIR}/devel/gmake -MAKE_PROGRAM= ${GMAKE} -.else -MAKE_PROGRAM= ${MAKE} -.endif -.if defined(USE_AUTOCONF) -GNU_CONFIGURE= yes -BUILD_DEPENDS+= ${AUTOCONF}:${PORTSDIR}/devel/autoconf -AUTOCONF_DIR?=${WRKSRC} -# missing ?= not an oversight -AUTOCONF_ENV=PATH=${PORTPATH} -.endif -.if defined(USE_LIBTOOL) -LIBTOOL?= ${LOCALBASE}/bin/libtool -BUILD_DEPENDS+= ${LIBTOOL}:${PORTSDIR}/devel/libtool -CONFIGURE_ENV+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}" -MAKE_ENV+= LIBTOOL="${LIBTOOL} ${LIBTOOL_FLAGS}" -.endif -.if defined(USE_EGCC) -BUILD_DEPENDS+= ${EGCC}:${PORTSDIR}/lang/egcs-stable -CC=${EGCC} -.endif -.if defined(USE_EGXX) -BUILD_DEPENDS+= ${EGXX}:${PORTSDIR}/lang/egcs-stable -CXX=${EGXX} -.endif -.if defined(USE_MOTIF) && !defined(HAVE_MOTIF) && !defined(REQUIRES_MOTIF) -LIB_DEPENDS+= Xm.:${PORTSDIR}/x11/lesstif -.endif - -.if exists(${PORTSDIR}/../Makefile.inc) -.include "${PORTSDIR}/../Makefile.inc" -.endif - -EXTRACT_COOKIE?= ${WRKDIR}/.extract_done -PATCH_COOKIE?= ${WRKDIR}/.patch_done -.if defined(SEPARATE_BUILD) -CONFIGURE_COOKIE?= ${WRKBUILD}/.configure_done -INSTALL_PRE_COOKIE?=${WRKBUILD}/.install_started -INSTALL_COOKIE?= ${WRKBUILD}/.install_done -BUILD_COOKIE?= ${WRKBUILD}/.build_done -PACKAGE_COOKIE?= ${WRKBUILD}/.package_done -.else -CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done -INSTALL_PRE_COOKIE?=${WRKDIR}/.install_started -INSTALL_COOKIE?= ${WRKDIR}/.install_done -BUILD_COOKIE?= ${WRKDIR}/.build_done -PACKAGE_COOKIE?= ${WRKDIR}/.package_done -.endif - -# Miscellaneous overridable commands: -GMAKE?= gmake -AUTOCONF?= autoconf -EGCC?= egcc -EGXX?= eg++ -XMKMF?= xmkmf -a - -# be paranoid about which ciphers we trust -.if exists(/sbin/md5) -MD5?= /sbin/md5 -.elif exists(/bin/md5) -MD5?= /bin/md5 -.elif exists(/usr/bin/md5) -MD5?= /usr/bin/md5 -.else -MD5?= md5 -.endif - -.if exists(/sbin/sha1) -SHA1?= /sbin/sha1 -.elif exists(/bin/sha1) -SHA1?= /bin/sha1 -.elif exists(/usr/bin/sha1) -SHA1?= /usr/bin/sha1 -.else -SHA1?= sha1 -.endif - -.if exists(/sbin/rmd160) -RMD160?= /sbin/rmd160 -.elif exists(/bin/rmd160) -RMD160?= /bin/rmd160 -.elif exists(/usr/bin/rmd160) -RMD160?= /usr/bin/rmd160 -.else -RMD160?= rmd160 -.endif - -# Compatibility game -MD5_FILE?= ${FILESDIR}/md5 -CHECKSUM_FILE?= ${MD5_FILE} - -# Don't touch !!! Used for generating checksums. -CIPHERS= ${SHA1}.SHA1 ${RMD160}.RMD160 ${MD5}.MD5 - -# This is the one you can override -PREFERRED_CIPHERS?= ${CIPHERS} - -PORTPATH?= /usr/bin:/bin:/usr/sbin:/sbin:${LOCALBASE}/bin:${X11BASE}/bin - -# Add any COPTS to CFLAGS. Note: programs that use imake do not -# use CFLAGS! Also, many (most?) ports hard code CFLAGS, ignoring -# what we pass in. -CFLAGS+= ${COPTS} - -MAKE_FLAGS?= -f -MAKEFILE?= Makefile -MAKE_ENV+= PATH=${PORTPATH} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}" - -.if exists(/usr/bin/fetch) -FETCH_CMD?= /usr/bin/fetch -.else -FETCH_CMD?= /usr/bin/ftp -.endif - -# By default, distfiles have no restrictions placed on them -MIRROR_DISTFILE?= yes - -TOUCH?= /usr/bin/touch -TOUCH_FLAGS?= -f - -PATCH?= /usr/bin/patch -PATCH_STRIP?= -p0 -PATCH_DIST_STRIP?= -p0 -.if defined(PATCH_DEBUG) -PATCH_DEBUG_TMP= yes -PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP} -PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP} -.else -PATCH_DEBUG_TMP= no -PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP} -PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP} -.endif -.if defined(BATCH) -PATCH_ARGS+= --batch -PATCH_DIST_ARGS+= --batch -.endif - -.if defined(PATCH_CHECK_ONLY) -PATCH_ARGS+= -C -PATCH_DIST_ARGS+= -C -.endif - -.if exists(/bin/tar) -TAR?= /bin/tar -.else -TAR?= /usr/bin/tar -.endif -UNZIP?= unzip -BZIP2?= bzip2 - -.if defined(USE_ZIP) -BUILD_DEPENDS+= ${UNZIP}:${PORTSDIR}/archivers/unzip -EXTRACT_CMD?= ${UNZIP} -EXTRACT_SUFX?= .zip -EXTRACT_BEFORE_ARGS?= -q -EXTRACT_AFTER_ARGS?= -d ${WRKDIR} -.else -# common tar case - -# Backwards compatibility. -.if defined(EXTRACT_ARGS) -EXTRACT_AFTER_ARGS?= | ${TAR} ${EXTRACT_ARGS} - -.else -EXTRACT_AFTER_ARGS?= | ${TAR} -xf - -.endif -EXTRACT_BEFORE_ARGS?= -dc - -.if defined(USE_BZIP2) -BUILD_DEPENDS+= ${BZIP2}:${PORTSDIR}/archivers/bzip2 -EXTRACT_CMD?= ${BZIP2} -EXTRACT_SUFX?= .tar.bz2 -.else -EXTRACT_CMD?= ${GZIP_CMD} -EXTRACT_SUFX?= .tar.gz -.endif - -.endif - -# Figure out where the local mtree file is -.if !defined(MTREE_FILE) -.if defined(USE_IMAKE) || defined(USE_X11) -MTREE_FILE= /etc/mtree/BSD.x11.dist -.else -MTREE_FILE= /etc/mtree/BSD.local.dist -.endif -.endif -MTREE_CMD?= /usr/sbin/mtree -MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -q -p - -.include -MAKE_ENV+= EXTRA_SYS_MK_INCLUDES="" - -.if !defined(NO_WRKDIR) -.if defined(OBJMACHINE) -WRKDIR?= ${.CURDIR}/work.${MACHINE_ARCH} -.else -WRKDIR?= ${.CURDIR}/work -.endif -.else -WRKDIR?= ${.CURDIR} -.endif -.if defined(NO_WRKSUBDIR) -WRKSRC?= ${WRKDIR} -.else -WRKSRC?= ${WRKDIR}/${DISTNAME} -.endif - -.if defined(SEPARATE_BUILD) -WRKBUILD?= ${WRKDIR}/build-${ARCH} -.else -WRKBUILD?= ${WRKSRC} -.endif - -.if defined(WRKOBJDIR) -__canonical_PORTSDIR!= cd ${PORTSDIR}; pwd -P -__canonical_CURDIR!= cd ${.CURDIR}; pwd -P -PORTSUBDIR= ${__canonical_CURDIR:S,${__canonical_PORTSDIR}/,,} -.endif - -# A few aliases for *-install targets -INSTALL_PROGRAM= \ - ${INSTALL} ${INSTALL_COPY} ${INSTALL_STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} -INSTALL_SCRIPT= \ - ${INSTALL} ${INSTALL_COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} -INSTALL_DATA= \ - ${INSTALL} ${INSTALL_COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE} -INSTALL_MAN= \ - ${INSTALL} ${INSTALL_COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE} -INSTALL_PROGRAM_DIR= \ - ${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m ${BINMODE} -INSTALL_SCRIPT_DIR= \ - ${INSTALL_PROGRAM_DIR} -INSTALL_DATA_DIR= \ - ${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} -m ${BINMODE} -INSTALL_MAN_DIR= \ - ${INSTALL} -d -o ${MANOWN} -g ${MANGRP} -m ${BINMODE} - -INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ - BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ - BSD_INSTALL_DATA="${INSTALL_DATA}" \ - BSD_INSTALL_MAN="${INSTALL_MAN}" \ - BSD_INSTALL_PROGRAM_DIR="${INSTALL_PROGRAM_DIR}" \ - BSD_INSTALL_SCRIPT_DIR="${INSTALL_SCRIPT_DIR}" \ - BSD_INSTALL_DATA_DIR="${INSTALL_DATA_DIR}" \ - BSD_INSTALL_MAN_DIR="${INSTALL_MAN_DIR}" -MAKE_ENV+= ${INSTALL_MACROS} -SCRIPTS_ENV+= ${INSTALL_MACROS} - -# The user can override the NO_PACKAGE by specifying this from -# the make command line -.if defined(FORCE_PACKAGE) -.undef NO_PACKAGE -.endif - -# Support architecture dependent packing lists -# -COMMENT?= ${PKGDIR}/COMMENT -DESCR?= ${PKGDIR}/DESCR -.if exists(${PKGDIR}/PLIST.${ARCH}) -PLIST?= ${PKGDIR}/PLIST.${ARCH} -.else -.if defined(NO_SHARED_LIBS) && exists(${PKGDIR}/PLIST.noshared) -PLIST?= ${PKGDIR}/PLIST.noshared -.else -PLIST?= ${PKGDIR}/PLIST -.endif -.endif - -PKG_CMD?= /usr/sbin/pkg_create -PKG_DELETE?= /usr/sbin/pkg_delete -SORT_DEPENDS?=tsort|tail +2|tail -r - -.if !defined(PKG_ARGS) -PKG_ARGS= -v -c ${COMMENT} -d ${DESCR} -f ${PLIST} -p ${PREFIX} -P "`${MAKE} package-depends|${SORT_DEPENDS}`" -.if exists(${PKGDIR}/INSTALL) -PKG_ARGS+= -i ${PKGDIR}/INSTALL -.endif -.if exists(${PKGDIR}/DEINSTALL) -PKG_ARGS+= -k ${PKGDIR}/DEINSTALL -.endif -.if exists(${PKGDIR}/REQ) -PKG_ARGS+= -r ${PKGDIR}/REQ -.endif -.if exists(${PKGDIR}/MESSAGE) -PKG_ARGS+= -D ${PKGDIR}/MESSAGE -.endif -.if !defined(NO_MTREE) -PKG_ARGS+= -m ${MTREE_FILE} -.endif -.endif -PKG_SUFX?= .tgz -# where pkg_add records its dirty deeds. -PKG_DBDIR?= /var/db/pkg - -# shared/dynamic motif libs -.if defined(USE_MOTIF) || defined(HAVE_MOTIF) -.if defined(MOTIF_STATIC) -MOTIFLIB?= ${X11BASE}/lib/libXm.a -.else -MOTIFLIB?= -L${X11BASE}/lib -lXm -.endif -.endif - -AWK?= /usr/bin/awk -BASENAME?= /usr/bin/basename -CAT?= /bin/cat -CP?= /bin/cp -DIRNAME?= /usr/bin/dirname -ECHO?= /bin/echo -EXPR?= /bin/expr -FALSE?= /usr/bin/false -FILE?= /usr/bin/file -GREP?= /usr/bin/grep -GUNZIP_CMD?= /usr/bin/gunzip -f -GZCAT?= /usr/bin/gzcat -GZIP?= -9 -GZIP_CMD?= /usr/bin/gzip -nf ${GZIP} -LDCONFIG?= [ ! -x /sbin/ldconfig ] || /sbin/ldconfig -LN?= /bin/ln -M4?= /usr/bin/m4 -MKDIR?= /bin/mkdir -p -MV?= /bin/mv -READLINK?= /usr/bin/readlink -RM?= /bin/rm -RMDIR?= /bin/rmdir -SED?= /usr/bin/sed -FIND?= /usr/bin/find - -# XXX ${SETENV} is needed in front of var=value lists whenever the next -# command is expanded from a variable, as this could be a shell construct -SETENV?= /usr/bin/env -SH?= /bin/sh -TR?= /usr/bin/tr -TRUE?= /usr/bin/true - -# Used to print all the '===>' style prompts - override this to turn them off. -ECHO_MSG?= ${ECHO} - -# How to do nothing. Override if you, for some strange reason, would rather -# do something. -DO_NADA?= ${TRUE} - -ALL_TARGET?= all -INSTALL_TARGET?= install - -.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) -INSTALL_TARGET+= install.man -.endif - -# Popular master sites -MASTER_SITE_XCONTRIB+= \ - ftp://crl.dec.com/pub/X11/contrib/%SUBDIR%/ \ - ftp://ftp.eu.net/X11/contrib/%SUBDIR%/ \ - ftp://ftp.uni-paderborn.de/pub/X11/contrib/%SUBDIR%/ \ - ftp://ftp.x.org/contrib/%SUBDIR%/ - -MASTER_SITE_GNU+= \ - ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ \ - ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/ \ - ftp://ftp.kddlabs.co.jp/pub/gnu/%SUBDIR%/ \ - ftp://ftp.digex.net/pub/gnu/%SUBDIR%/ \ - ftp://ftp.cs.ubc.ca/mirror2/gnu/%SUBDIR%/ \ - ftp://ftp.cdrom.com/pub/gnu/%SUBDIR%/ \ - ftp://ftp.duke.edu/pub/gnu/%SUBDIR%/ \ - ftp://ftp.gamma.ru/pub/gnu/%SUBDIR%/ \ - ftp://tron.um.u-tokyo.ac.jp/pub/GNU/prep/%SUBDIR%/ - -MASTER_SITE_PERL_CPAN+= \ - ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ \ - ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/%SUBDIR%/ - -MASTER_SITE_TEX_CTAN+= \ - ftp://ftp.cdrom.com/pub/tex/ctan/%SUBDIR%/ \ - ftp://wuarchive.wustl.edu/packages/TeX/%SUBDIR%/ \ - ftp://ftp.funet.fi/pub/TeX/CTAN/%SUBDIR%/ \ - ftp://ftp.tex.ac.uk/public/ctan/tex-archive/%SUBDIR%/ \ - ftp://ftp.dante.de/tex-archive/%SUBDIR%/ - -MASTER_SITE_SUNSITE+= \ - ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ \ - ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/%SUBDIR%/ \ - ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/%SUBDIR%/ \ - ftp://ftp.lip6.fr/pub/linux/sunsite/%SUBDIR% - -MASTER_SITE_KDE+= \ - ftp://ftp.us.kde.org/pub/kde/%SUBDIR%/ \ - ftp://ftp.kde.org/pub/kde/%SUBDIR%/ \ - ftp://ftp.tuniv.szczecin.pl/pub/kde/%SUBDIR%/ \ - ftp://ftp.fu-berlin.de/pub/unix/X11/gui/kde/%SUBDIR%/ \ - ftp://ftp.dataplus.se/pub/linux/kde/%SUBDIR%/ - -MASTER_SITE_GNOME+= \ - ftp://ftp.jimpick.com/pub/mirrors/gnome/%SUBDIR%/ \ - ftp://ftp.geo.net/pub/gnome/%SUBDIR%/ \ - ftp://gnomeftp.wgn.net/pub/gnome/%SUBDIR%/ \ - ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/ - -MASTER_SITE_AFTERSTEP+= \ - ftp://ftp.afterstep.org/%SUBDIR%/ \ - ftp://ftp.digex.net/pub/os/wm/AfterStep/%SUBDIR%/ \ - ftp://ftp.alpha1.net/pub/mirrors/ftp.afterstep.org/%SUBDIR%/ \ - ftp://ftp.math.uni-bonn.de/pub/mirror/ftp.afterstep.org/%SUBDIR%/ \ - ftp://ftp.bse.bg/pub/Unix/X11/wm/afterstep/%SUBDIR%/ \ - ftp://ftp.dti.ad.jp/pub/X/AfterStep/%SUBDIR%/ \ - ftp://ftp.lbi.ro/mirrors/ftp.afterstep.org/pub/%SUBDIR%/ \ - ftp://casper.yz.yamagata-u.ac.jp/pub/X11/apps/afterstep/%SUBDIR%/ - -MASTER_SITE_WINDOWMAKER+= \ - ftp://ftp.windowmaker.org/pub/%SUBDIR%/ \ - ftp://ftp.goldweb.com.au/pub/WindowMaker/%SUBDIR%/ \ - ftp://ftp.io.com/pub/mirror/windowmaker/%SUBDIR%/ \ - ftp://ftp.ensm-ales.fr/pub/mirrors/ftp.windowmaker.org/%SUBDIR%/ \ - ftp://ftp.freenews.de/pub/windowmaker/%SUBDIR%/ \ - http://jgo.local.net/cool_downloads/wm/%SUBDIR%/ \ - ftp://ftp.cybertrails.com/pub/windowmaker/%SUBDIR%/ \ - ftp://ftp.ameth.org/pub/mirrors/ftp.windowmaker.org/%SUBDIR%/ - -MASTER_SITE_TCLTK+= \ - ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/ \ - ftp://mirror.neosoft.com/pub/tcl/mirror/ftp.scriptics.com/%SUBDIR%/ \ - ftp://sunsite.utk.edu/pub/tcl/%SUBDIR%/ \ - ftp://ftp.funet.fi/pub/languages/tcl/tcl/%SUBDIR%/ \ - ftp://ftp.cs.tu-berlin.de/pub/tcl/distrib/%SUBDIR%/ \ - ftp://ftp.srcc.msu.su/mirror/ftp.scriptics.com/pub/tcl/%SUBDIR%/ \ - ftp://ftp.lip6.fr/pub/tcl/distrib/%SUBDIR%/ - -# Empty declaration to avoid "variable MASTER_SITES recursive" error -MASTER_SITES?= -PATCH_SITES?= - -# Substitute subdirectory names -_MASTER_SITES:= ${MASTER_SITES:S/%SUBDIR%/${MASTER_SITE_SUBDIR}/} -PATCH_SITES:= ${PATCH_SITES:S/%SUBDIR%/${PATCH_SITE_SUBDIR}/} -MASTER_SITES:= ${_MASTER_SITES} - -# Two backup master sites, First one at ftp.openbsd.org -# -_MASTER_SITE_OPENBSD?= \ - ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/${DIST_SUBDIR}/ \ - ftp://ftp.openbsd.org/pub/OpenBSD/licensed/${DIST_SUBDIR}/ - -# set the backup master sites. -# -MASTER_SITE_BACKUP?= \ - ${_MASTER_SITE_OPENBSD} \ - ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/ - -# If the user has this set, go to the OpenBSD repository for everything. -# -.if defined(MASTER_SITE_OPENBSD) -MASTER_SITE_OVERRIDE= ${_MASTER_SITE_OPENBSD} -.endif - -# Where to put distfiles that don't have any other master site -# ;;; This is referenced in a few Makefiles -- I'd like to get rid of it -# -MASTER_SITE_LOCAL?= \ - ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ \ - ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/LOCAL_PORTS/ - -# I guess we're in the master distribution business! :) As we gain mirror -# sites for distfiles, add them to this list. -.if !defined(MASTER_SITE_OVERRIDE) -MASTER_SITES+= ${MASTER_SITE_BACKUP} -PATCH_SITES+= ${MASTER_SITE_BACKUP} -.else -MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${MASTER_SITES} -PATCH_SITES:= ${MASTER_SITE_OVERRIDE} ${PATCH_SITES} -.endif - -# OpenBSD code to handle ports distfiles on a CDROM. The distfiles -# are located in /cdrom/distfiles/${DIST_SUBDIR}/ (assuming that the -# CDROM is mounted on /cdrom). -# -.if exists(/cdrom/distfiles) -CDROM_SITE:= /cdrom/distfiles/${DIST_SUBDIR} -.if defined(FETCH_SYMLINK_DISTFILES) -CDROM_COPY:= ${LN} -CDROM_OPT= -s -.else -CDROM_COPY:= ${CP} -CDROM_OPT= -f -.endif -.endif - -# Derived names so that they're easily overridable. -DISTFILES?= ${DISTNAME}${EXTRACT_SUFX} -PKGNAME?= ${DISTNAME} - -.if make(makesum) || make(addsum) || defined(__FETCH_ALL) -.if defined(SUPDISTFILES) - DISTFILES+=${SUPDISTFILES} -.endif -.if defined(SUPPATCHFILES) - PATCHFILES+=${SUPPATCHFILES} -.endif -.endif -ALLFILES?= ${DISTFILES} ${PATCHFILES} - -.if defined(IGNOREFILES) -CKSUMFILES!= \ - for file in ${ALLFILES}; do \ - ignore=0; \ - for tmp in ${IGNOREFILES}; do \ - if [ "$$file" = "$$tmp" ]; then \ - ignore=1; \ - fi; \ - done; \ - if [ "$$ignore" = 0 ]; then \ - echo "$$file"; \ - else \ - echo ""; \ - fi; \ - done -.else -CKSUMFILES= ${ALLFILES} -.endif - -# List of all files, with ${DIST_SUBDIR} in front. Used for checksum. -.if defined(DIST_SUBDIR) -_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//} -_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//} -.else -_CKSUMFILES?= ${CKSUMFILES} -_IGNOREFILES?= ${IGNOREFILES} -.endif - -# This is what is actually going to be extracted, and is overridable -# by user. -EXTRACT_ONLY?= ${DISTFILES} - -# Documentation -MAINTAINER?= ports@OpenBSD.ORG - -.if !defined(CATEGORIES) -.BEGIN: - @${ECHO_MSG} "CATEGORIES is mandatory." - @${FALSE} -.endif - -PKGREPOSITORYSUBDIR?= All -PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR} -.if exists(${PACKAGES}) -PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX} -.else -PKGFILE?= ${PKGNAME}${PKG_SUFX} -.endif - -CONFIGURE_SCRIPT?= configure -.if defined(SEPARATE_BUILD) -_CONFIGURE_SCRIPT=${WRKSRC}/${CONFIGURE_SCRIPT} -.else -_CONFIGURE_SCRIPT=./${CONFIGURE_SCRIPT} -.endif -CONFIGURE_ENV+= PATH=${PORTPATH} - -.if defined(GNU_CONFIGURE) -CONFIGURE_ARGS+= --prefix=${PREFIX} -CONFIGURE_ARGS+= --sysconfdir=${SYSCONFDIR} -HAS_CONFIGURE= yes -.endif - -.if defined(NO_SHARED_LIBS) -CONFIGURE_SHARED?= --disable-shared -.else -CONFIGURE_SHARED?= --enable-shared -.endif - -# Passed to most of script invocations -SCRIPTS_ENV+= CURDIR=${.CURDIR} DISTDIR=${DISTDIR} \ - PATH=${PORTPATH} \ - WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} WRKBUILD=${WRKBUILD} \ - PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \ - PORTSDIR=${PORTSDIR} DEPENDS="${DEPENDS}" \ - PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} - -.if defined(BATCH) -SCRIPTS_ENV+= BATCH=yes -.endif - -MANPREFIX?= ${PREFIX} -CATPREFIX?= ${PREFIX} - -.for sect in 1 2 3 4 5 6 7 8 9 -MAN${sect}PREFIX?= ${MANPREFIX} -CAT${sect}PREFIX?= ${CATPREFIX} -.endfor -MANLPREFIX?= ${MANPREFIX} -MANNPREFIX?= ${MANPREFIX} -CATLPREFIX?= ${CATPREFIX} -CATNPREFIX?= ${CATPREFIX} - -MANLANG?= "" # english only by default - -.for lang in ${MANLANG} - -.for sect in 1 2 3 4 5 6 7 8 9 -.if defined(MAN${sect}) -_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect}/%} -.endif -.if defined(CAT${sect}) -_CATPAGES+= ${CAT${sect}:S%^%${CAT${sect}PREFIX}/man/${lang}/cat${sect}/%} -.endif -.endfor - -.if defined(MANL) -_MANPAGES+= ${MANL:S%^%${MANLPREFIX}/man/${lang}/manl/%} -.endif - -.if defined(MANN) -_MANPAGES+= ${MANN:S%^%${MANNPREFIX}/man/${lang}/mann/%} -.endif - -.if defined(CATL) -_CATPAGES+= ${CATL:S%^%${CATLPREFIX}/man/${lang}/catl/%} -.endif - -.if defined(CATN) -_CATPAGES+= ${CATN:S%^%${CATNPREFIX}/man/${lang}/catn/%} -.endif - -.endfor - -.MAIN: all - -################################################################ -# Many ways to disable a port. -# -# If we're in BATCH mode and the port is interactive, or we're -# in interactive mode and the port is non-interactive, skip all -# the important targets. The reason we have two modes is that -# one might want to leave a build in BATCH mode running -# overnight, then come back in the morning and do _only_ the -# interactive ones that required your intervention. -# -# Don't attempt to build ports that require Motif if you don't -# have Motif. -# -# Ignore ports that can't be resold if building for a CDROM. -# -# Don't build a port if it's restricted and we don't want to get -# into that. -# -# Don't build a port if it's broken. -# -# Don't build a port if it comes with the base system. -################################################################ - -.if !defined(NO_IGNORE) -.if (defined(IS_INTERACTIVE) && defined(BATCH)) -IGNORE= "is an interactive port" -.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE)) -IGNORE= "is not an interactive port" -.elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF)) -IGNORE= "requires Motif" -.elif (defined(MOTIF_ONLY) && !defined(REQUIRES_MOTIF)) -IGNORE= "does not require Motif" -.elif (defined(NO_CDROM) && defined(FOR_CDROM)) -IGNORE= "may not be placed on a CDROM: ${NO_CDROM}" -.elif (defined(RESTRICTED) && defined(NO_RESTRICTED)) -IGNORE= "is restricted: ${RESTRICTED}" -.elif ((defined(USE_IMAKE) || defined(USE_X11)) && !exists(${X11BASE})) -IGNORE= "uses X11, but ${X11BASE} not found" -.elif defined(BROKEN) -IGNORE= "is marked as broken: ${BROKEN}" -.elif defined(ONLY_FOR_ARCHS) -.for __ARCH in ${ONLY_FOR_ARCHS} -.if (${MACHINE_ARCH} == "${__ARCH}") || (${ARCH} == "${__ARCH}") -__ARCH_OK= 1 -.endif -.endfor -.if !defined(__ARCH_OK) -.if ${MACHINE_ARCH} == "${ARCH}" -IGNORE= "is only for ${ONLY_FOR_ARCHS}, not ${MACHINE_ARCH}" -.else -IGNORE= "is only for ${ONLY_FOR_ARCHS}, not ${MACHINE_ARCH} \(${ARCH}\)" -.endif -.endif -.elif defined(COMES_WITH) -.if ( ${OPSYS_VER} >= ${COMES_WITH} ) -IGNORE= "-- ${PKGNAME:C/-[0-9].*//g} comes with ${OPSYS} as of release ${COMES_WITH}" -.endif -.endif - -.if defined(IGNORE) -.if defined(IGNORE_SILENT) -IGNORECMD= ${DO_NADA} -.else -IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} ${IGNORE}." -.endif -fetch: - @${IGNORECMD} -checksum: - @${IGNORECMD} -extract: - @${IGNORECMD} -patch: - @${IGNORECMD} -configure: - @${IGNORECMD} -all: - @${IGNORECMD} -build: - @${IGNORECMD} -install: - @${IGNORECMD} -uninstall deinstall: - @${IGNORECMD} -package: - @${IGNORECMD} -.endif # IGNORE -.endif # !NO_IGNORE - -.if defined(ALL_HOOK) -all: - @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \ - DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} WRKBUILD=${WRKBUILD}\ - PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \ - FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \ - DEPENDS="${DEPENDS}" BUILD_DEPENDS="${BUILD_DEPENDS}" \ - RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \ - ${ALL_HOOK} -.endif - -.if !target(all) -all: build -.endif - -.if !defined(DEPENDS_TARGET) -.if make(reinstall) -DEPENDS_TARGET= reinstall -.else -DEPENDS_TARGET= install -.endif -.endif - -################################################################ -# The following are used to create easy dummy targets for -# disabling some bit of default target behavior you don't want. -# They still check to see if the target exists, and if so don't -# do anything, since you might want to set this globally for a -# group of ports in a Makefile.inc, but still be able to -# override from an individual Makefile. -################################################################ - -# Disable checksum -.if defined(NO_CHECKSUM) -.for _TARGET in makesum addsum -.if !target(${_TARGET}) -${_TARGET}: fetch-all - @${DO_NADA} -.endif -.endfor -.if !target(checksum) -checksum: fetch - @${DO_NADA} -.endif -.endif - -# Disable extract -.if defined(NO_EXTRACT) && !target(extract) -extract: - @${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE} -checksum: fetch - @${DO_NADA} -makesum addsum: fetch-all - @${DO_NADA} -.endif - -# Disable patch -.if defined(NO_PATCH) && !target(patch) -patch: extract - @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE} -.endif - -# Disable configure -.if defined(NO_CONFIGURE) && !target(configure) -configure: patch - @${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE} -.endif - -# Disable build -.if defined(NO_BUILD) && !target(build) -build: configure - @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE} -.endif - -# Disable install -.if defined(NO_INSTALL) && !target(install) -install: build - @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE} -.endif - -# Disable package -.if defined(NO_PACKAGE) && !target(package) -package: -.if defined(IGNORE_SILENT) - @${DO_NADA} -.else - @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: ${NO_PACKAGE}." -.endif -.endif - -# Disable describe -.if defined(NO_DESCRIBE) && !target(describe) -describe: - @${DO_NADA} -.endif - -################################################################ -# More standard targets start here. -# -# These are the body of the build/install framework. If you are -# not happy with the default actions, and you can't solve it by -# adding pre-* or post-* targets/scripts, override these. -################################################################ - -# Fetch - -.if !target(do-fetch) -do-fetch: - @${MKDIR} ${_DISTDIR} - @(cd ${_DISTDIR}; \ - for file in ${DISTFILES}; do \ - if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ - if [ -h $$file -o -h `${BASENAME} $$file` ]; then \ - ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \ - ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \ - ${ECHO_MSG} ">> Please correct this problem and try again."; \ - exit 1; \ - fi ; \ - if [ ! -z ${CDROM_COPY} ]; then \ - if ${CDROM_COPY} ${CDROM_OPT} ${CDROM_SITE}/$$file .; then \ - continue; \ - fi ; \ - fi ; \ - ${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \ - if [ ! -w ${_DISTDIR}/. ]; then \ - ${ECHO_MSG} ">> Can't download to ${_DISTDIR} (permission denied?)."; \ - exit 1; \ - fi; \ - for site in ${MASTER_SITES}; do \ - ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \ - if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \ - continue 2; \ - fi \ - done; \ - ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\ - ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \ - exit 1; \ - fi \ - done) -.if defined(PATCHFILES) - @(cd ${_DISTDIR}; \ - for file in ${PATCHFILES}; do \ - if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ - if [ -h $$file -o -h `${BASENAME} $$file` ]; then \ - ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \ - ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \ - ${ECHO_MSG} ">> Please correct this problem and try again."; \ - exit 1; \ - fi ; \ - ${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \ - for site in ${PATCH_SITES}; do \ - ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \ - if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \ - continue 2; \ - fi \ - done; \ - ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\ - ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \ - exit 1; \ - fi \ - done) -.endif -.endif - -# This is for the use of sites which store distfiles which others may -# fetch - only fetch the distfile if it is allowed to be -# re-distributed freely -mirror-distfiles: -.if (${MIRROR_DISTFILE} == "yes") - @make fetch-all __ARCH_OK=yes NO_IGNORE=yes NO_WARNINGS=yes -.endif - -# list the distribution and patch files used by a port. Typical -# use is make ECHO_MSG=: list-distfiles | tee some-file -# -list-distfiles: - @echo "${PKGNAME}" - @for file in ${DISTFILES} ${PATCHFILES}; do \ - if [ "$$file" != "${EXTRACT_SUFX}" ]; then \ - if [ -z "${DIST_SUBDIR}" ]; then \ - printf "\t$$file\n"; \ - else \ - printf "\t${DIST_SUBDIR}/$$file\n"; \ - fi \ - fi \ - done - @echo "" - -# Obj -# -.if !target(obj) -obj: -.if !defined(NO_WRKDIR) -.if defined(WRKOBJDIR) - @${RM} -rf ${WRKOBJDIR}/${PORTSUBDIR} - @${MKDIR} -p ${WRKOBJDIR}/${PORTSUBDIR} - @if [ ! -L ${WRKDIR} ] || \ - [ X`${READLINK} ${WRKDIR}` != X${WRKOBJDIR}/${PORTSUBDIR} ]; then \ - echo "${WRKDIR} -> ${WRKOBJDIR}/${PORTSUBDIR}"; \ - ${RM} -f ${WRKDIR}; \ - ${LN} -sf ${WRKOBJDIR}/${PORTSUBDIR} ${WRKDIR}; \ - fi -.else - @${ECHO_MSG} ">>" - @${ECHO_MSG} ">> Please set the WRKOBJDIR variable before using 'make obj'" - @${ECHO_MSG} ">>" - @exit 1; -.endif -.endif -.endif - -# Extract - -.if !target(do-extract) -do-extract: -.if !defined(NO_WRKDIR) -.if defined(WRKOBJDIR) - @${RM} -rf ${WRKOBJDIR}/${PORTSUBDIR} - @${MKDIR} -p ${WRKOBJDIR}/${PORTSUBDIR} - @if [ ! -L ${WRKDIR} ] || \ - [ X`${READLINK} ${WRKDIR}` != X${WRKOBJDIR}/${PORTSUBDIR} ]; then \ - echo "${WRKDIR} -> ${WRKOBJDIR}/${PORTSUBDIR}"; \ - ${RM} -f ${WRKDIR}; \ - ${LN} -sf ${WRKOBJDIR}/${PORTSUBDIR} ${WRKDIR}; \ - fi -.else - @${RM} -rf ${WRKDIR} - @${MKDIR} ${WRKDIR} -.endif -.endif - @PATH=${PORTPATH}; \ - for file in ${EXTRACT_ONLY}; do \ - if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\ - then \ - exit 1; \ - fi \ - done -.endif - -# Patch - -.if !target(do-patch) -do-patch: -.if defined(PATCHFILES) - @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}" - @(cd ${_DISTDIR}; \ - for i in ${PATCHFILES}; do \ - if [ ${PATCH_DEBUG_TMP} = yes ]; then \ - ${ECHO_MSG} "===> Applying distribution patch $$i" ; \ - fi; \ - case $$i in \ - *.Z|*.gz) \ - ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \ - ;; \ - *) \ - ${PATCH} ${PATCH_DIST_ARGS} < $$i; \ - ;; \ - esac; \ - done) -.endif - @if [ -d ${PATCHDIR} ]; then \ - (cd ${PATCHDIR}; \ - for i in ${PATCH_LIST}; do \ - case $$i in \ - *.orig|*.rej|*~) \ - ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \ - ;; \ - *) \ - if [ -e $$i ]; then \ - if [ ${PATCH_DEBUG_TMP} = yes ]; then \ - ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \ - fi; \ - ${PATCH} ${PATCH_ARGS} < $$i; \ - else \ - ${ECHO_MSG} "===> Can't find patch matching $$i"; \ - if [ -d ${PATCHDIR}/CVS -a "$$i" = \ - "${PATCHDIR}/patch-*" ]; then \ - ${ECHO_MSG} "===> Perhaps you forgot the -P flag to cvs co or update?"; \ - fi; \ - fi; \ - ;; \ - esac; \ - done) \ - fi -.endif - -# Configure - -.if !target(do-configure) -do-configure: ${WRKBUILD} -.if defined(USE_AUTOCONF) - @cd ${AUTOCONF_DIR} && ${SETENV} ${AUTOCONF_ENV} ${AUTOCONF} -.endif - @if [ -f ${SCRIPTDIR}/configure ]; then \ - cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ - ${SCRIPTDIR}/configure; \ - fi -.if defined(HAS_CONFIGURE) - @(cd ${WRKBUILD} && CC="${CC}" ac_cv_path_CC="${CC}" CFLAGS="${CFLAGS}" \ - CXX="${CXX}" ac_cv_path_CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \ - INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \ - INSTALL_PROGRAM="${INSTALL_PROGRAM}" INSTALL_MAN="${INSTALL_MAN}" \ - INSTALL_SCRIPT="${INSTALL_SCRIPT}" INSTALL_DATA="${INSTALL_DATA}" \ - ${CONFIGURE_ENV} ${_CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}) -.endif -.if defined(USE_IMAKE) - @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${XMKMF}) -.endif -.endif - -${WRKBUILD}: - ${MKDIR} ${WRKBUILD} - -# Build - -.if !target(do-build) -do-build: - @(cd ${WRKBUILD}; ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET}) -.endif - -# Install - -.if !target(do-install) -do-install: - @(cd ${WRKBUILD} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET}) -.endif - -# Package - -.if !target(do-package) -do-package: - @if [ -e ${PLIST} ]; then \ - ${ECHO_MSG} "===> Building package for ${PKGNAME}"; \ - if [ -d ${PACKAGES} ]; then \ - if [ ! -d ${PKGREPOSITORY} ]; then \ - if ! ${MKDIR} ${PKGREPOSITORY}; then \ - ${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \ - exit 1; \ - fi; \ - fi; \ - fi; \ - if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \ - if [ -d ${PACKAGES} ]; then \ - ${MAKE} ${.MAKEFLAGS} package-links; \ - fi; \ - else \ - ${MAKE} ${.MAKEFLAGS} delete-package; \ - exit 1; \ - fi; \ - fi -.endif - -# Some support rules for do-package - -.if !target(package-links) -package-links: - @${MAKE} ${.MAKEFLAGS} delete-package-links - @for cat in ${CATEGORIES}; do \ - if [ ! -d ${PACKAGES}/$$cat ]; then \ - if ! ${MKDIR} ${PACKAGES}/$$cat; then \ - ${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \ - exit 1; \ - fi; \ - fi; \ - ln -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \ - done; -.endif - -.if !target(delete-package-links) -delete-package-links: - @${FIND} ${PACKAGES} -type l -name ${PKGNAME}${PKG_SUFX}|xargs ${RM} -f -.endif - -.if !target(delete-package) -delete-package: - @${MAKE} ${.MAKEFLAGS} delete-package-links - @${RM} -f ${PKGFILE} -.endif - -################################################################ -# This is the "generic" port target, actually a macro used from the -# six main targets. See below for more. -################################################################ - -_PORT_USE: .USE -.if make(real-fetch) - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends -.endif -.if make(real-extract) - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends lib-depends misc-depends -.endif -.if make(real-install) -.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) - @if [ -d ${PKG_DBDIR}/${PKGNAME} -o "X$$(ls -d ${PKG_DBDIR}/${PKGNAME:C/-[0-9].*//g}-* 2> /dev/null)" != "X" ]; then \ - ${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \ - ${ECHO_MSG} " If so, you may wish to \`\`make deinstall'' and install"; \ - ${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \ - ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGNAME}"; \ - ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \ - ${ECHO_MSG} " in your environment or the \"make install\" command line."; \ - exit 1; \ - fi -.endif - @if [ `${SH} -c umask` != ${DEF_UMASK} ]; then \ - ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \ - ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \ - ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \ - fi - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends lib-depends -.endif -.if make(real-install) - @touch ${INSTALL_PRE_COOKIE} -.if !defined(NO_MTREE) - @if [ `id -u` = 0 ]; then \ - if [ ! -f ${MTREE_FILE} ]; then \ - ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \ - ${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \ - exit 1; \ - else \ - if [ ! -d ${PREFIX} ]; then \ - mkdir -p ${PREFIX}; \ - fi; \ - ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/; \ - fi; \ - else \ - ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \ - ${ECHO_MSG} "Become root and try again to ensure correct permissions."; \ - fi -.endif -.endif - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/} - @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \ - cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ - ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \ - fi - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/} - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/} - @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \ - cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ - ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \ - fi -.if make(real-install) && (defined(_MANPAGES) || defined(_CATPAGES)) -.if defined(MANCOMPRESSED) && defined(NOMANCOMPRESS) - @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}" -.for manpage in ${_MANPAGES} ${_CATPAGES} - @${GUNZIP_CMD} ${manpage}.gz -.endfor -.elif !defined(MANCOMPRESSED) && !defined(NOMANCOMPRESS) - @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}" -.for manpage in ${_MANPAGES} ${_CATPAGES} - @if [ -L ${manpage} ]; then \ - set - `${FILE} ${manpage}`; \ - shift `${EXPR} $$# - 1`; \ - ${LN} -sf $${1}.gz ${manpage}.gz; \ - ${RM} ${manpage}; \ - else \ - ${GZIP_CMD} ${manpage}; \ - fi -.endfor -.endif -.endif -.if make(real-install) && exists(${PKGDIR}/MESSAGE) - @${CAT} ${PKGDIR}/MESSAGE -.endif -.if make(real-install) && !defined(NO_PKG_REGISTER) - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg -.endif -.if make(real-extract) - @${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE} -.endif -.if make(real-patch) && !defined(PATCH_CHECK_ONLY) - @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE} -.endif -.if make(real-configure) - @${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE} -.endif -.if make(real-install) - @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE} -.endif -.if make(real-build) - @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE} -.endif -.if make(real-package) && !defined(PACKAGE_NOINSTALL) - @${TOUCH} ${TOUCH_FLAGS} ${PACKAGE_COOKIE} -.endif - -################################################################ -# Skeleton targets start here -# -# You shouldn't have to change these. Either add the pre-* or -# post-* targets/scripts or redefine the do-* targets. These -# targets don't do anything other than checking for cookies and -# call the necessary targets/scripts. -################################################################ - -.if !target(fetch) -fetch: - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-fetch -.endif -.if !target(fetch-all) -fetch-all: - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} __FETCH_ALL=yes real-fetch -.endif - - -.if !target(extract) -extract: ${EXTRACT_COOKIE} -.endif - -.if !target(patch) -patch: extract ${PATCH_COOKIE} -.endif - -.if !target(configure) -configure: patch ${CONFIGURE_COOKIE} -.endif - -.if !target(build) -build: configure ${BUILD_COOKIE} -.endif - -.if !target(install) -install: build ${INSTALL_COOKIE} -.endif - -.if !target(package) -package: install ${PACKAGE_COOKIE} -.endif - -${EXTRACT_COOKIE}: - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} checksum real-extract -${PATCH_COOKIE}: - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-patch -${CONFIGURE_COOKIE}: - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-configure -${BUILD_COOKIE}: - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build -${INSTALL_COOKIE}: - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-install -${PACKAGE_COOKIE}: - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-package - -# And call the macros - -real-fetch: _PORT_USE -real-extract: _PORT_USE - @${ECHO_MSG} "===> Extracting for ${PKGNAME}" -real-patch: _PORT_USE - @${ECHO_MSG} "===> Patching for ${PKGNAME}" -real-configure: _PORT_USE - @${ECHO_MSG} "===> Configuring for ${PKGNAME}" -real-build: _PORT_USE - @${ECHO_MSG} "===> Building for ${PKGNAME}" -real-install: _PORT_USE - @${ECHO_MSG} "===> Installing for ${PKGNAME}" -real-package: _PORT_USE - -# Empty pre-* and post-* targets, note we can't use .if !target() -# in the _PORT_USE macro - -.for name in fetch extract patch configure build install package - -.if !target(pre-${name}) -pre-${name}: - @${DO_NADA} -.endif - -.if !target(post-${name}) -post-${name}: - @${DO_NADA} -.endif - -.endfor - -# Checkpatch -# -# Special target to verify patches - -.if !target(checkpatch) -checkpatch: - @cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${.MAKEFLAGS} patch -.endif - -# Reinstall -# -# Special target to re-run install - -.if !target(reinstall) -reinstall: - @${RM} -f ${INSTALL_PRE_COOKIE} ${INSTALL_COOKIE} ${PACKAGE_COOKIE} - @DEPENDS_TARGET=${DEPENDS_TARGET} ${MAKE} install -.endif - -# Deinstall -# -# Special target to remove installation - -.if !target(deinstall) -uninstall deinstall: - @${ECHO_MSG} "===> Deinstalling for ${PKGNAME}" - @${PKG_DELETE} -f ${PKGNAME} - @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} -.endif - - -################################################################ -# Some more targets supplied for users' convenience -################################################################ - -# Cleaning up - -.if !target(pre-clean) -pre-clean: - @${DO_NADA} -.endif - -.if !target(clean) -clean: pre-clean -.if !defined(NOCLEANDEPENDS) - @${MAKE} clean-depends -.endif - @${ECHO_MSG} "===> Cleaning for ${PKGNAME}" -.if !defined(NO_WRKDIR) -.if defined(WRKOBJDIR) - @${RM} -rf ${WRKOBJDIR}/${PORTSUBDIR} - @${RM} -f ${WRKDIR} -.else - @if [ -d ${WRKDIR} ]; then \ - if [ -w ${WRKDIR} ]; then \ - ${RM} -rf ${WRKDIR}; \ - else \ - ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \ - fi; \ - fi -.endif -.else - @${RM} -f ${WRKDIR}/.*_started ${WRKDIR}/.*_done -.endif -.endif - -.if !target(pre-distclean) -pre-distclean: - @${DO_NADA} -.endif - -.if !target(distclean) -distclean: pre-distclean clean - @${ECHO_MSG} "===> Dist cleaning for ${PKGNAME}" - @(if [ -d ${_DISTDIR} ]; then \ - cd ${_DISTDIR}; \ - ${RM} -f ${DISTFILES} ${PATCHFILES}; \ - fi) -.if defined(DIST_SUBDIR) - -@${RMDIR} ${_DISTDIR} -.endif -.endif - -# Prints out a list of files to fetch (useful to do a batch fetch) - -# are we called from bsd.port.subdir.mk (i.e. do we scan all dirs anyways)? XXX -.ifdef(DIRPRFX) -RECURSIVE_FETCH_LIST?= NO -.else -RECURSIVE_FETCH_LIST?= YES -.endif - -.if !target(fetch-list) -fetch-list: - @${MAKE} fetch-list-recursive RECURSIVE_FETCH_LIST=${RECURSIVE_FETCH_LIST} | sort -u -.endif # !target(fetch-list) - -.if !target(fetch-list-recursive) -fetch-list-recursive: - @${MAKE} fetch-list-one-pkg -.if ${RECURSIVE_FETCH_LIST} != "NO" - @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ - (cd $$dir; ${MAKE} fetch-list-recursive; ); \ - done -.endif # ${RECURSIVE_FETCH_LIST} != "NO" -.endif # !target(fetch-list-recursive) - -.if !target(fetch-list-one-pkg) -fetch-list-one-pkg: - @${MKDIR} ${_DISTDIR} - @[ -z "${_DISTDIR}" ] || ${ECHO} "${MKDIR} ${_DISTDIR}" - @(cd ${_DISTDIR}; \ - for file in ${DISTFILES}; do \ - if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ - ${ECHO} -n "cd ${_DISTDIR} && [ -f $$file -o -f `${BASENAME} $$file` ] || " ; \ - for site in ${MASTER_SITES} ; do \ - ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '|| ' ; \ - done; \ - ${ECHO} "echo $${file} not fetched" ; \ - fi \ - done) -.if defined(PATCHFILES) - @(cd ${_DISTDIR}; \ - for file in ${PATCHFILES}; do \ - if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ - ${ECHO} -n "cd ${_DISTDIR} && [ -f $$file -o -f `${BASENAME} $$file` ] || " ; \ - for site in ${PATCH_SITES}; do \ - ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '|| ' ; \ - done; \ - ${ECHO} "echo $${file} not fetched" ; \ - fi \ - done) -.endif # defined(PATCHFILES) -.endif # !target(fetch-list-one-pkg) - -# Checksumming utilities - -.if !target(makesum) -makesum: fetch-all - @${MKDIR} ${FILESDIR} - @if [ -f ${CHECKSUM_FILE} ]; then ${RM} -f ${CHECKSUM_FILE}; fi - @(cd ${DISTDIR}; \ - for file in ${_CKSUMFILES}; do \ - for cipher in ${CIPHERS:R}; do \ - $$cipher $$file >> ${CHECKSUM_FILE}; \ - done; \ - done) - @for file in ${_IGNOREFILES}; do \ - ${ECHO} "MD5 ($$file) = IGNORE" >> ${CHECKSUM_FILE}; \ - done - @sort -u -o ${CHECKSUM_FILE} ${CHECKSUM_FILE} -.endif - -.if !target(addsum) -addsum: fetch-all - @${MKDIR} ${FILESDIR} - @touch ${CHECKSUM_FILE} - @(cd ${DISTDIR}; \ - for file in ${_CKSUMFILES}; do \ - for cipher in ${CIPHERS:R}; do \ - $$cipher $$file >> ${CHECKSUM_FILE}; \ - done; \ - done) - @for file in ${_IGNOREFILES}; do \ - ${ECHO} "MD5 ($$file) = IGNORE" >> ${CHECKSUM_FILE}; \ - done - @sort -u -o ${CHECKSUM_FILE} ${CHECKSUM_FILE} - @if [ `${SED} -e 's/\=.*$$//' ${CHECKSUM_FILE} | uniq -d | wc -l` -ne 0 ]; then \ - ${ECHO} "Inconsistent checksum in ${CHECKSUM_FILE}"; \ - ${FALSE}; \ - else \ - ${ECHO} "${CHECKSUM_FILE} updated okay, don't forget to remove cruft"; \ - fi -.endif - -.if !target(checksum) -checksum: fetch - @if [ ! -f ${CHECKSUM_FILE} ]; then \ - ${ECHO_MSG} ">> No checksum file."; \ - else \ - (cd ${DISTDIR}; OK="true"; \ - for file in ${_CKSUMFILES}; do \ - for cipher_sig in ${PREFERRED_CIPHERS}; do \ - sig=`${EXPR} $$cipher_sig : '.*\.\(.*\)'`; \ - CKSUM2=`${GREP} "^$$sig ($$file)" ${CHECKSUM_FILE} | ${AWK} '{print $$4}'`; \ - if [ "$$CKSUM2" = "" ]; then \ - ${ECHO_MSG} ">> No $$sig checksum recorded for $$file."; \ - else \ - cipher=`${EXPR} $$cipher_sig : '\(.*\)\.'`; \ - break; \ - fi; \ - done; \ - if [ "$$CKSUM2" = "" ]; then \ - ${ECHO_MSG} ">> No checksum recorded for $$file."; \ - OK="false"; \ - elif [ "$$CKSUM2" = "IGNORE" ]; then \ - ${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \ - ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \ - OK="false"; \ - else \ - CKSUM=`$$cipher < $$file`; \ - if [ "$$CKSUM" = "$$CKSUM2" ]; then \ - ${ECHO_MSG} ">> Checksum OK for $$file. ($$sig)"; \ - else \ - ${ECHO_MSG} ">> Checksum mismatch for $$file. ($$sig)"; \ - OK="false"; \ - fi; \ - fi; \ - done; \ - for file in ${_IGNOREFILES}; do \ - CKSUM2=`${GREP} "($$file)" ${CHECKSUM_FILE} | ${AWK} '{print $$4}'`; \ - if [ "$$CKSUM2" = "" ]; then \ - ${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \ - OK="false"; \ - elif [ "$$CKSUM2" != "IGNORE" ]; then \ - ${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \ - ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \ - OK="false"; \ - fi; \ - done; \ - if [ "$$OK" != "true" ]; then \ - ${ECHO_MSG} "Make sure the Makefile and checksum file (${CHECKSUM_FILE})"; \ - ${ECHO_MSG} "are up to date. If you want to override this check, type"; \ - ${ECHO_MSG} "\"make NO_CHECKSUM=yes [other args]\"."; \ - exit 1; \ - fi) ; \ - fi -.endif - -# packing list utilities. This generates a packing list from a recently -# installed port. Not perfect, but pretty close. The generated file -# will have to have some tweaks done by hand. -# Note: add @comment PACKAGE(arch=${ARCH}, opsys=${OPSYS}, vers=${OPSYS_VER}) -# when port is installed or package created. -# -.if !target(plist) -plist: install - @${MKDIR} ${PKGDIR} - @(dirs=""; \ - ld=""; \ - for f in `${FIND} ${PREFIX} -newer ${INSTALL_PRE_COOKIE} -print 2> /dev/null`; do \ - ff=`${ECHO} $$f | ${SED} -e 's|^${PREFIX}/||'`; \ - if [ -d $$f -a ! -h $$f ]; then dirs="$$ff $$dirs"; \ - else \ - ${ECHO} $$ff; \ - if ${ECHO} $$f | ${GREP} -E -q -e '[^/]+\.so\.[0-9]+\.[0-9]+$$'; then \ - ld="$$LDCONFIG `${DIRNAME} $$f`"; \ - fi; \ - fi; \ - done; \ - for f in $$dirs; do \ - if ${GREP} -q -e `${BASENAME} $$f` ${MTREE_FILE}; then \ - :; \ - else \ - ${ECHO} "@dirrm $$f"; \ - fi; \ - done; \ - for f in $$ld; do ${ECHO} "@exec ${LDCONFIG} -m $$f"; done; \ - ) > ${PLIST}-auto -.endif - -################################################################ -# The special package-building targets -# You probably won't need to touch these -################################################################ - - -# The README.html target needs full information (this is passed via -# depends-list and package-depends) -.ifndef FULL_PACKAGE_NAME -FULL_PACKAGE_NAME=NO -.endif - - -# Nobody should want to override this unless PKGNAME is simply bogus. - -.if !target(package-name) -package-name: -.if (${FULL_PACKAGE_NAME} == "YES") - @${ECHO} `${MAKE} package-path`/${PKGNAME} -.else - @${ECHO} '${PKGNAME}' -.endif -.endif - -.if !target(package-path) -package-path: - @pwd | sed s@`cd ${PORTSDIR} ; pwd`/@@g -.endif - -# Build (recursively) a list of package dependencies suitable for tsort - -.if !target(package-depends) -package-depends: - @for dir in `${ECHO} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ - if [ -d $$dir ]; then \ - ${MAKE} ECHO='${ECHO} -n' package-name FULL_PACKAGE_NAME=${FULL_PACKAGE_NAME}; \ - ${ECHO} -n " "; \ - (cd $$dir ; ${MAKE} package-name package-depends FULL_PACKAGE_NAME=${FULL_PACKAGE_NAME}); \ - else \ - ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \ - fi; \ - done -.endif - -# Build a package but don't check the package cookie - -.if !target(repackage) -repackage: pre-repackage package - -pre-repackage: - @${RM} -f ${PACKAGE_COOKIE} -.endif - -# Build a package but don't check the cookie for installation, also don't -# install package cookie - -.if !target(package-noinstall) -package-noinstall: - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package -.endif - -################################################################ -# Dependency checking -################################################################ - -.if !target(depends) -depends: lib-depends misc-depends - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends - @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends - -.if make(fetch-depends) -DEPENDS_TMP+= ${FETCH_DEPENDS} -.endif - -.if make(build-depends) -DEPENDS_TMP+= ${BUILD_DEPENDS} -.endif - -.if make(run-depends) -DEPENDS_TMP+= ${RUN_DEPENDS} -.endif - -_DEPENDS_USE: .USE -.if defined(DEPENDS_TMP) -.if !defined(NO_DEPENDS) - @PATH=${PORTPATH}; \ - for i in ${DEPENDS_TMP}; do \ - prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \ - dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \ - if ${EXPR} "$$dir" : '.*:' > /dev/null; then \ - target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ - dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ - else \ - target=${DEPENDS_TARGET}; \ - fi; \ - found=not; \ - if ${EXPR} "$$prog" : \\/ >/dev/null; then \ - if [ -e "$$prog" ]; then \ - ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \ - found=""; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \ - fi; \ - else \ - for d in `echo $$PATH | tr ':' ' '`; do \ - if [ -x $$d/$$prog ]; then \ - found="$$d/$$prog"; \ - break; \ - fi \ - done; \ - ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - $$found found"; \ - fi; \ - if [ X"$$found" = Xnot ]; then \ - ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \ - if [ ! -d "$$dir" ]; then \ - ${ECHO_MSG} ">> No directory for $$prog. Skipping.."; \ - else \ - (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \ - ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \ - fi; \ - fi; \ - done -.endif -.else - @${DO_NADA} -.endif - -fetch-depends: _DEPENDS_USE -build-depends: _DEPENDS_USE -run-depends: _DEPENDS_USE - -lib-depends: -.if defined(LIB_DEPENDS) -.if !defined(NO_DEPENDS) -.if defined(NO_SHARED_LIBS) - @for i in ${LIB_DEPENDS}; do \ - lib=`${ECHO} $$i | ${SED} -e 's/:.*//' -e 's|\([^\\]\)[\\\.].*|\1|'`; \ - dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \ - if ${EXPR} "$$dir" : '.*:' > /dev/null; then \ - target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ - dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ - else \ - target=${DEPENDS_TARGET}; \ - fi; \ - tmp=`mktemp /tmp/bpmXXXXXXXXXX`; \ - if ${LD} -r -o $$tmp -L${LOCALBASE}/lib -L${X11BASE}/lib -l$$lib; then \ - ${ECHO_MSG} "===> ${PKGNAME} depends on library: $$lib - found"; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on library: $$lib - not found"; \ - ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \ - if [ ! -d "$$dir" ]; then \ - ${ECHO_MSG} ">> No directory for $$lib. Skipping.."; \ - else \ - (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \ - ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \ - fi; \ - fi; \ - ${RM} -f $$tmp; \ - done -.else - @for i in ${LIB_DEPENDS}; do \ - lib=`${ECHO} $$i | ${SED} -e 's/:.*//' -e 's|\([^\\]\)\.|\1\\\\.|g'`; \ - dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \ - if ${EXPR} "$$dir" : '.*:' > /dev/null; then \ - target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ - dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ - else \ - target=${DEPENDS_TARGET}; \ - fi; \ - libname=`${ECHO} $$lib | ${SED} -e 's|\\\\||g'`; \ - reallib=`${LDCONFIG} -r | ${GREP} -e "-l$$lib" | awk '{ print $$3 }'`; \ - if [ "X$$reallib" = X"" ]; then \ - ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$libname - not found"; \ - ${ECHO_MSG} "===> Verifying $$target for $$libname in $$dir"; \ - if [ ! -d "$$dir" ]; then \ - ${ECHO_MSG} ">> No directory for $$libname. Skipping.."; \ - else \ - (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \ - ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \ - fi; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$libname - $$reallib found"; \ - fi; \ - done -.endif -.endif -.else - @${DO_NADA} -.endif - -misc-depends: -.if defined(DEPENDS) -.if !defined(NO_DEPENDS) - @for dir in ${DEPENDS}; do \ - if ${EXPR} "$$dir" : '.*:' > /dev/null; then \ - target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \ - dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \ - else \ - target=${DEPENDS_TARGET}; \ - fi; \ - ${ECHO_MSG} "===> ${PKGNAME} depends on: $$dir"; \ - ${ECHO_MSG} "===> Verifying $$target for $$dir"; \ - if [ ! -d $$dir ]; then \ - ${ECHO_MSG} ">> No directory for $$dir. Skipping.."; \ - else \ - (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \ - fi \ - done - @${ECHO_MSG} "===> Returning to build of ${PKGNAME}" -.endif -.else - @${DO_NADA} -.endif - -.endif - -.if !target(clean-depends) -clean-depends: -.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) \ - || defined(RUN_DEPENDS) - @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u`; do \ - if [ -d $$dir ] ; then \ - (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \ - fi \ - done -.endif -.if defined(DEPENDS) - @for dir in `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ - if [ -d $$dir ] ; then \ - (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \ - fi \ - done -.endif -.endif - -.if !target(depends-list) -depends-list: - @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \ - if [ -d $$dir ]; then \ - ${MAKE} ECHO='${ECHO} -n' package-name FULL_PACKAGE_NAME=${FULL_PACKAGE_NAME}; \ - ${ECHO} -n " "; \ - (cd $$dir ; ${MAKE} package-name depends-list FULL_PACKAGE_NAME=${FULL_PACKAGE_NAME}); \ - else \ - ${ECHO_MSG} "Warning: \"$$dir\" non-existent" >&2; \ - fi; \ - done -.endif - -################################################################ -# Everything after here are internal targets and really -# shouldn't be touched by anybody but the release engineers. -################################################################ - -# This target generates an index entry suitable for aggregation into -# a large index. Format is: -# -# distribution-name|port-path|installation-prefix|comment| \ -# description-file|maintainer|categories|build deps|run deps|for arch -# -.if !target(describe) -describe: - @${ECHO} -n "${PKGNAME}|${.CURDIR}|"; \ - ${ECHO} -n "${PREFIX}|"; \ - if [ -f ${COMMENT} ]; then \ - ${ECHO} -n "`${CAT} ${COMMENT}`"; \ - else \ - ${ECHO} -n "** No Description"; \ - fi; \ - if [ -f ${DESCR} ]; then \ - ${ECHO} -n "|${DESCR}"; \ - else \ - ${ECHO} -n "|/dev/null"; \ - fi; \ - ${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \ - case "A${FETCH_DEPENDS}B${BUILD_DEPENDS}C${LIB_DEPENDS}D${DEPENDS}E" in \ - ABCDE) ;; \ - *) cd ${.CURDIR} && ${ECHO} -n `make depends-list|${SORT_DEPENDS}`;; \ - esac; \ - ${ECHO} -n "|"; \ - case "A${RUN_DEPENDS}B${LIB_DEPENDS}C${DEPENDS}D" in \ - ABCD) ;; \ - *) cd ${.CURDIR} && ${ECHO} -n `make package-depends|${SORT_DEPENDS}`;; \ - esac; \ - ${ECHO} -n "|"; \ - if [ "${ONLY_FOR_ARCHS}" = "" ]; then \ - ${ECHO} -n "any"; \ - else \ - ${ECHO} -n "${ONLY_FOR_ARCHS}"; \ - fi; \ - ${ECHO} "" -.endif - -README_NAME?= ${TEMPLATES}/README.port - -.if !target(readmes) -readmes: readme -.endif - -.if !target(readme) -readme: - @rm -f README.html - @cd ${.CURDIR} && make README_NAME=${README_NAME} README.html -.endif - - -HTMLIFY= ${SED} -e 's/&/\&/g' -e 's/>/\>/g' -e 's/ Creating README.html for ${PKGNAME}" - @${ECHO} ${PKGNAME} | ${HTMLIFY} > $@.tmp3 - @${MAKE} depends-list FULL_PACKAGE_NAME=YES | ${SORT_DEPENDS}>$@.tmp1 - @${MAKE} package-depends FULL_PACKAGE_NAME=YES | ${SORT_DEPENDS} >$@.tmp2 -.for I in 1 2 - @if [ -s $@.tmp$I ]; then \ - (${CAT} $@.tmp$I | while read n; do \ - j=`dirname $$n|${HTMLIFY}`; k=`basename $$n|${HTMLIFY}`; \ - echo "$$k"; \ - done;) >$@.tmp$Ia; \ - else \ - echo "(none)" > $@.tmp$Ia; \ - fi -.endfor - @${CAT} ${README_NAME} | \ - ${SED} -e 's|%%PORT%%|'"`${MAKE} package-path | ${HTMLIFY}`"'|g' \ - -e '/%%PKG%%/r$@.tmp3' \ - -e '/%%PKG%%/d' \ - -e '/%%COMMENT%%/r${PKGDIR}/COMMENT' \ - -e '/%%COMMENT%%/d' \ - -e '/%%BUILD_DEPENDS%%/r$@.tmp1a' \ - -e '/%%BUILD_DEPENDS%%/d' \ - -e '/%%RUN_DEPENDS%%/r$@.tmp2a' \ - -e '/%%RUN_DEPENDS%%/d' \ - >> $@ - @rm -f $@.tmp* - -.if !target(print-depends-list) -print-depends-list: -.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \ - defined(LIB_DEPENDS) || defined(DEPENDS) - @${ECHO} -n 'This port requires package(s) "' - @${ECHO} -n `make FULL_PACKAGE_NAME=${FULL_PACKAGE_NAME} depends-list | ${SORT_DEPENDS}` - @${ECHO} '" to build.' -.endif -.endif - -.if !target(print-package-depends) -print-package-depends: -.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS) - @${ECHO} -n 'This port requires package(s) "' - @${ECHO} -n `make FULL_PACKAGE_NAME=${FULL_PACKAGE_NAME} package-depends | ${SORT_DEPENDS}` - @${ECHO} '" to run.' -.endif -.endif - -.if !target(print-depends) -print-depends: - @${MAKE} FULL_PACKAGE_NAME=YES print-depends-list print-package-depends -.endif - -# Fake installation of package so that user can pkg_delete it later. -# Also, make sure that an installed port is recognized correctly in -# accordance to the @pkgdep directive in the packing lists - -.if !target(fake-pkg) -fake-pkg: - @if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi - @if [ `/bin/ls -l ${COMMENT} | ${AWK} '{print $$5}'` -gt 60 ]; then \ - ${ECHO} "** ${COMMENT} too large - installation not recorded."; \ - exit 1; \ - fi - @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi -.if defined(FORCE_PKG_REGISTER) - @${RM} -rf ${PKG_DBDIR}/${PKGNAME} -.endif - @if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \ - ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \ - ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \ - ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \ - ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \ - ${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \ - if [ -f ${PKGDIR}/INSTALL ]; then \ - ${CP} ${PKGDIR}/INSTALL ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \ - fi; \ - if [ -f ${PKGDIR}/DEINSTALL ]; then \ - ${CP} ${PKGDIR}/DEINSTALL ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \ - fi; \ - if [ -f ${PKGDIR}/REQ ]; then \ - ${CP} ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQ; \ - fi; \ - if [ -f ${PKGDIR}/MESSAGE ]; then \ - ${CP} ${PKGDIR}/MESSAGE ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \ - fi; \ - for dep in `make package-depends ECHO_MSG=${TRUE} | ${SORT_DEPENDS}`; do \ - if [ -d ${PKG_DBDIR}/$$dep ]; then \ - if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \ - >/dev/null 2>&1; then \ - ${ECHO} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \ - fi; \ - fi; \ - done; \ - fi -.endif - -# Depend is generally meaningless for arbitrary ports, but if someone wants -# one they can override this. This is just to catch people who've gotten into -# the habit of typing `make depend all install' as a matter of course. -# -.if !target(depend) -depend: -.endif - -# Same goes for tags -.if !target(tags) -tags: -.endif - -.PHONY: \ - addsum all build build-depends checkpatch \ - checksum clean clean-depends configure deinstall \ - delete-package delete-package-links depend depends depends-list \ - describe distclean do-build do-configure do-extract \ - do-fetch do-install do-package do-patch extract list-distfiles \ - fake-pkg fetch fetch-depends fetch-list fetch-list-one-pkg \ - fetch-list-recursive install lib-depends makesum mirror-distfiles \ - misc-depends package package-depends package-links package-name \ - package-noinstall package-path patch plist post-build \ - post-configure post-extract post-fetch post-install post-package \ - post-patch pre-build pre-clean pre-configure pre-distclean \ - pre-extract pre-fetch pre-install pre-package pre-patch \ - pre-repackage print-depends-list print-package-depends readme \ - readmes real-extract real-fetch real-install reinstall \ - repackage run-depends tags uninstall fetch-all print-depends +# if you can't find this file, cvs update your ports tree as well.