Annotation of src/share/mk/bsd.port.mk, Revision 1.36
1.9 imp 1: #-*- mode: Fundamental; tab-width: 4; -*-
2: # ex:ts=4
1.35 marc 3: # $OpenBSD: bsd.port.mk,v 1.34 1998/07/08 03:27:17 marc Exp $
1.9 imp 4: # $NetBSD: $
1.1 niklas 5: #
6: # bsd.port.mk - 940820 Jordan K. Hubbard.
7: # This file is in the public domain.
8: #
1.13 imp 9: # FreeBSD Id: bsd.port.mk,v 1.264 1996/12/25 02:27:44 imp Exp
1.6 niklas 10: #
1.1 niklas 11: # Please view me with 4 column tabs!
12:
1.13 imp 13: # There are two different types of "maintainers" in the whole ports
14: # framework concept. Maintainers of the bsd.port*.mk files
1.32 marc 15: # are listed below in the ${OPSYS}_MAINTAINER entries (this file
1.13 imp 16: # is used by multiple *BSD flavors). You should consult them directly
17: # if you have any questions/suggestions regarding this file since only
18: # they are allowed to modify the master copies in the CVS repository!
19:
20: # For each port, the MAINTAINER variable is what you should consult for
21: # contact information on the person(s) to contact if you have questions/
22: # suggestions about that specific port. By default (if no MAINTAINER
23: # is listed), a port is maintained by the subscribers of the ports@freebsd.org
24: # mailing list, and any correspondece should be directed there.
1.9 imp 25: #
1.13 imp 26: FreeBSD_MAINTAINER= asami@FreeBSD.ORG
1.30 marc 27: OpenBSD_MAINTAINER= marc@OpenBSD.ORG
1.1 niklas 28:
29: # Supported Variables and their behaviors:
30: #
31: # Variables that typically apply to all ports:
32: #
1.10 niklas 33: # ONLY_FOR_ARCHS- If a port only makes sense to certain architectures, this
34: # is a list containing the names for them. It is checked
35: # against the predefined ${MACHINE} value
1.13 imp 36: # ARCH - The architecture, as returned by "uname -m".
1.9 imp 37: # OPSYS - Portability clause. This is the operating system the
38: # makefile is being used on. Automatically set to
39: # "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
1.32 marc 40: # OPSYS_VER - The current version if the operating system
1.9 imp 41: # PORTSDIR - The root of the ports tree. Defaults:
1.13 imp 42: # FreeBSD/OpenBSD: /usr/ports
43: # NetBSD: /usr/opt
1.1 niklas 44: # DISTDIR - Where to get gzip'd, tarballed copies of original sources
1.9 imp 45: # (default: ${PORTSDIR}/distfiles).
1.1 niklas 46: # PREFIX - Where to install things in general (default: /usr/local).
47: # MASTER_SITES - Primary location(s) for distribution files if not found
1.9 imp 48: # locally.
1.1 niklas 49: # PATCH_SITES - Primary location(s) for distribution patch files
1.9 imp 50: # (see PATCHFILES below) if not found locally.
1.1 niklas 51: #
1.9 imp 52: # MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
53: # files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
54: # (default:
1.27 marc 55: # ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/${DIST_SUBDIR}/
1.34 marc 56: # ftp://ftp.openbsd.org/pub/OpenBSD/licensed/${DIST_SUBDIR}/
1.9 imp 57: # ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
1.1 niklas 58: # MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
59: # value.
1.27 marc 60: # MASTER_SITE_OPENBSD - If set, only use ftp.openbsd.org as the
61: # MASTER_SITE_OVERRIDE.
62: # MASTER_SITE_FREEBSD - If set, only use ftp.freebsd.org as the
63: # MASTER_SITE_OVERRIDE.
1.1 niklas 64: # PACKAGES - A top level directory where all packages go (rather than
65: # going locally to each port). (default: ${PORTSDIR}/packages).
66: # GMAKE - Set to path of GNU make if not in $PATH (default: gmake).
67: # XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
68: # MAINTAINER - The e-mail address of the contact person for this port
69: # (default: ports@FreeBSD.ORG).
1.9 imp 70: # CATEGORIES - A list of descriptive categories into which this port falls.
1.14 niklas 71: # WRKOBJDIR - A top level directory where, if defined, the separate working
72: # directories will get created, and symbolically linked to from
73: # ${WRKDIR} (see below). This is useful for building ports on
74: # several architectures, then ${PORTSDIR} can be NFS-mounted
75: # while ${WRKOBJDIR} is local to every arch.
76:
1.1 niklas 77: #
78: # Variables that typically apply to an individual port. Non-Boolean
79: # variables without defaults are *mandatory*.
80: #
81: # WRKDIR - A temporary working directory that gets *clobbered* on clean
82: # (default: ${.CURDIR}/work).
83: # WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
84: # unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
85: # NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
86: # DISTNAME - Name of port or distribution.
87: # DISTFILES - Name(s) of archive file(s) containing distribution
88: # (default: ${DISTNAME}${EXTRACT_SUFX}).
89: # PATCHFILES - Name(s) of additional files that contain distribution
90: # patches (default: none). make will look for them at
91: # PATCH_SITES (see above). They will automatically be
92: # uncompressed before patching if the names end with
93: # ".gz" or ".Z".
1.9 imp 94: # DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES}
1.1 niklas 95: # and ${PATCHFILES} will be put in this subdirectory of
96: # ${DISTDIR}. Also they will be fetched in this subdirectory
97: # from FreeBSD mirror sites.
1.9 imp 98: # ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
99: # IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set
100: # this variable to their names.
1.1 niklas 101: # PKGNAME - Name of the package file to create if the DISTNAME
102: # isn't really relevant for the port/package
103: # (default: ${DISTNAME}).
104: # EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to
105: # actually extract.
106: # PATCHDIR - A directory containing any additional patches you made
107: # to port this software to FreeBSD (default:
108: # ${.CURDIR}/patches)
109: # SCRIPTDIR - A directory containing any auxiliary scripts
110: # (default: ${.CURDIR}/scripts)
111: # FILESDIR - A directory containing any miscellaneous additional files.
112: # (default: ${.CURDIR}/files)
113: # PKGDIR - A direction containing any package creation files.
114: # (default: ${.CURDIR}/pkg)
115: # PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
116: # FORCE_PKG_REGISTER - If set, it will overwrite any existing package
117: # registration information in ${PKG_DBDIR}/${PKGNAME}.
118: # NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
1.13 imp 119: # the "install" target.
120: # MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist
121: # if USE_IMAKE or USE_X11 is set, /etc/mtree/BSD.local.dist
122: # otherwise.)
1.26 marc 123: # COMES_WITH - The first version that a port was made part of the
124: # standard OpenBSD distribution. If the current OpenBSD
125: # version is >= this version then a notice will be
126: # displayed instead the port being generated.
1.1 niklas 127: #
1.6 niklas 128: # NO_BUILD - Use a dummy (do-nothing) build target.
129: # NO_CONFIGURE - Use a dummy (do-nothing) configure target.
1.9 imp 130: # NO_CDROM - Port may not go on CDROM. Set this string to reason.
1.6 niklas 131: # NO_DESCRIBE - Use a dummy (do-nothing) describe target.
1.1 niklas 132: # NO_EXTRACT - Use a dummy (do-nothing) extract target.
1.6 niklas 133: # NO_INSTALL - Use a dummy (do-nothing) install target.
1.1 niklas 134: # NO_PACKAGE - Use a dummy (do-nothing) package target.
1.6 niklas 135: # NO_PKG_REGISTER - Don't register a port install as a package.
1.1 niklas 136: # NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
137: # NO_WRKDIR - There's no work directory at all; port does this someplace
138: # else.
139: # NO_DEPENDS - Don't verify build of dependencies.
1.9 imp 140: # BROKEN - Port is broken. Set this string to the reason why.
1.1 niklas 141: # RESTRICTED - Port is restricted. Set this string to the reason why.
142: # USE_GMAKE - Says that the port uses gmake.
1.13 imp 143: # USE_PERL5 - Says that the port uses perl5 for building and running.
1.1 niklas 144: # USE_IMAKE - Says that the port uses imake.
1.13 imp 145: # USE_X11 - Says that the port uses X11 (i.e., installs in ${X11BASE}).
1.1 niklas 146: # NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
147: # target.
148: # HAS_CONFIGURE - Says that the port has its own configure script.
149: # GNU_CONFIGURE - Set if you are using GNU configure (optional).
150: # CONFIGURE_SCRIPT - Name of configure script, defaults to 'configure'.
151: # CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set.
1.13 imp 152: # CONFIGURE_ENV - Pass these env (shell-like) to configure if
1.1 niklas 153: # ${HAS_CONFIGURE} is set.
1.13 imp 154: # SCRIPTS_ENV - Additional environment vars passed to scripts in
155: # ${SCRIPTDIR} executed by bsd.port.mk.
156: # MAKE_ENV - Additional environment vars passed to sub-make in build
157: # stage.
1.1 niklas 158: # IS_INTERACTIVE - Set this if your port needs to interact with the user
159: # during a build. User can then decide to skip this port by
160: # setting ${BATCH}, or compiling only the interactive ports
161: # by setting ${INTERACTIVE}.
1.7 niklas 162: # FETCH_DEPENDS - A list of "path:dir" pairs of other ports this
163: # package depends in the "fetch" stage. "path" is the
164: # name of a file if it starts with a slash (/), an
165: # executable otherwise. make will test for the
166: # existence (if it is a full pathname) or search for
167: # it in your $PATH (if it is an executable) and go
168: # into "dir" to do a "make all install" if it's not
169: # found.
170: # BUILD_DEPENDS - A list of "path:dir" pairs of other ports this
171: # package depends to build (between the "extract" and
172: # "build" stages, inclusive). The test done to
173: # determine the existence of the dependency is the
174: # same as FETCH_DEPENDS.
175: # RUN_DEPENDS - A list of "path:dir" pairs of other ports this
176: # package depends to run. The test done to determine
177: # the existence of the dependency is the same as
178: # FETCH_DEPENDS. This will be checked during the
179: # "install" stage and the name of the dependency will
180: # be put into the package as well.
1.1 niklas 181: # LIB_DEPENDS - A list of "lib:dir" pairs of other ports this package
182: # depends on. "lib" is the name of a shared library.
183: # make will use "ldconfig -r" to search for the
184: # library. Note that lib can be any regular expression,
185: # and you need two backslashes in front of dots (.) to
186: # supress its special meaning (e.g., use
187: # "foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*").
188: # DEPENDS - A list of other ports this package depends on being
189: # made first. Use this for things that don't fall into
190: # the above two categories.
191: # EXTRACT_CMD - Command for extracting archive (default: tar).
192: # EXTRACT_SUFX - Suffix for archive names (default: .tar.gz).
193: # EXTRACT_BEFORE_ARGS -
194: # Arguments to ${EXTRACT_CMD} before filename
1.13 imp 195: # (default: -xzf).
1.1 niklas 196: # EXTRACT_AFTER_ARGS -
197: # Arguments to ${EXTRACT_CMD} following filename
198: # (default: none).
199: #
1.6 niklas 200: # FETCH_CMD - Full path to ftp/http fetch command if not in $PATH
201: # (default: /usr/bin/fetch).
202: # FETCH_BEFORE_ARGS -
203: # Arguments to ${FETCH_CMD} before filename (default: none).
204: # FETCH_AFTER_ARGS -
205: # Arguments to ${FETCH_CMD} following filename (default: none).
1.1 niklas 206: #
207: # Motif support:
208: #
209: # REQUIRES_MOTIF - Set this in your port if it requires Motif. It will be
210: # built only if HAVE_MOTIF is set.
211: # HAVE_MOTIF - If set, means system has Motif. Typically set in
1.13 imp 212: # /etc/make.conf (FreeBSD,NetBSD) or
213: # /etc/mk.conf (OpenBSD).
1.1 niklas 214: # MOTIF_STATIC - If set, link libXm statically; otherwise, link it
1.13 imp 215: # dynamically. Typically set in
216: # /etc/make.conf (FreeBSD,NetBSD) or
217: # /etc/mk.conf (OpenBSD).
1.6 niklas 218: # MOTIFLIB - Set automatically to appropriate value depending on
219: # ${MOTIF_STATIC}. Substitute references to -lXm with
220: # patches to make your port conform to our standards.
1.13 imp 221: # MOTIF_ONLY - If set, build Motif ports only. (Not much use except for
222: # building packages.)
1.1 niklas 223: #
224: # Variables to change if you want a special behavior:
225: #
226: # ECHO_MSG - Used to print all the '===>' style prompts - override this
227: # to turn them off (default: /bin/echo).
1.13 imp 228: # DEPENDS_TARGET - The target to execute when a port is calling a
229: # dependency (default: "install").
1.6 niklas 230: # PATCH_DEBUG - If set, print out more information about the patches as
231: # it attempts to apply them.
232: #
1.9 imp 233: # Variables that serve as convenient "aliases" for your *-install targets.
234: # Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
1.6 niklas 235: #
236: # INSTALL_PROGRAM - A command to install binary executables.
237: # INSTALL_SCRIPT - A command to install executable scripts.
238: # INSTALL_DATA - A command to install sharable data.
239: # INSTALL_MAN - A command to install manpages (doesn't compress).
1.1 niklas 240: #
1.9 imp 241: # If your port doesn't automatically compress manpages, set the following.
242: # Depending on the setting of NOMANCOMPRESS, the make rules will compress
243: # the manpages for you.
244: #
245: # MAN<sect> - A list of manpages, categorized by section. For
246: # example, if your port has "man/man1/foo.1" and
247: # "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
248: # The available sections chars are "123456789LN".
249: # MANPREFIX - The directory prefix for ${MAN<sect>} (default: ${PREFIX}).
250: #
1.1 niklas 251: # Default targets and their behaviors:
252: #
253: # fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined)
254: # into ${DISTDIR} as necessary.
255: # fetch-list - Show list of files that would be retrieved by fetch
256: # extract - Unpacks ${DISTFILES} into ${WRKDIR}.
257: # patch - Apply any provided patches to the source.
258: # configure - Runs either GNU configure, one or more local configure
259: # scripts or nothing, depending on what's available.
260: # build - Actually compile the sources.
261: # install - Install the results of a build.
262: # reinstall - Install the results of a build, ignoring "already installed"
263: # flag.
1.32 marc 264: # plist - create a file suitable for use as a packing list. This
265: # is for port maintainers.
1.1 niklas 266: # package - Create a package from an _installed_ port.
267: # describe - Try to generate a one-line description for each port for
268: # use in INDEX files and the like.
269: # checkpatch - Do a "patch -C" instead of a "patch". Note that it may
270: # give incorrect results if multiple patches deal with
271: # the same file.
272: # checksum - Use files/md5 to ensure that your distfiles are valid.
273: # makesum - Generate files/md5 (only do this for your own ports!).
274: #
275: # Default sequence for "all" is: fetch checksum extract patch configure build
276: #
277: # Please read the comments in the targets section below, you
278: # should be able to use the pre-* or post-* targets/scripts
279: # (which are available for every stage except checksum) or
280: # override the do-* targets to do pretty much anything you want.
281: #
282: # NEVER override the "regular" targets unless you want to open
283: # a major can of worms.
284:
1.32 marc 285: # Get the operating system type and version
1.27 marc 286: OPSYS!= uname -s
1.32 marc 287: OPSYS_VER!= uname -r
1.27 marc 288:
1.13 imp 289: # Get the architecture
290: ARCH!= uname -m
1.9 imp 291:
1.1 niklas 292: .if exists(${.CURDIR}/../Makefile.inc)
293: .include "${.CURDIR}/../Makefile.inc"
294: .endif
295:
1.9 imp 296: .if (${OPSYS} == "OpenBSD")
1.10 niklas 297: NOMANCOMPRESS?= yes
1.14 niklas 298: DEF_UMASK?= 022
299: .else
300: DEF_UMASK?= 0022
1.9 imp 301: .endif
1.6 niklas 302:
1.13 imp 303: .if exists(${.CURDIR}/Makefile.${ARCH}-${OPSYS})
304: .include "${.CURDIR}/Makefile.${ARCH}-${OPSYS}"
305: .elif exists(${.CURDIR}/Makefile.${OPSYS})
306: .include "${.CURDIR}/Makefile.${OPSYS}"
307: .elif exists(${.CURDIR}/Makefile.${ARCH})
308: .include "${.CURDIR}/Makefile.${ARCH}"
309: .endif
310:
1.1 niklas 311: # These need to be absolute since we don't know how deep in the ports
312: # tree we are and thus can't go relative. They can, of course, be overridden
1.9 imp 313: # by individual Makefiles or local system make configuration.
314: .if (${OPSYS} == "NetBSD")
1.13 imp 315: PORTSDIR?= /usr/opt
1.9 imp 316: .else
1.13 imp 317: PORTSDIR?= /usr/ports
1.9 imp 318: .endif
1.13 imp 319: LOCALBASE?= ${DESTDIR}/usr/local
320: X11BASE?= ${DESTDIR}/usr/X11R6
1.9 imp 321: DISTDIR?= ${PORTSDIR}/distfiles
322: _DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
1.1 niklas 323: PACKAGES?= ${PORTSDIR}/packages
324: TEMPLATES?= ${PORTSDIR}/templates
325: .if !defined(NO_WRKDIR)
1.10 niklas 326: .if defined(OBJMACHINE)
327: WRKDIR?= ${.CURDIR}/work.${MACHINE}
328: .else
1.1 niklas 329: WRKDIR?= ${.CURDIR}/work
1.10 niklas 330: .endif
1.1 niklas 331: .else
332: WRKDIR?= ${.CURDIR}
333: .endif
334: .if defined(NO_WRKSUBDIR)
335: WRKSRC?= ${WRKDIR}
336: .else
337: WRKSRC?= ${WRKDIR}/${DISTNAME}
338: .endif
1.13 imp 339:
1.14 niklas 340: .if defined(WRKOBJDIR)
341: # XXX Is pwd -P available in FreeBSD's /bin/sh?
342: __canonical_PORTSDIR!= cd ${PORTSDIR}; pwd -P
343: __canonical_CURDIR!= cd ${.CURDIR}; pwd -P
344: PORTSUBDIR= ${__canonical_CURDIR:S,${__canonical_PORTSDIR}/,,}
345: .endif
346:
1.13 imp 347: .if exists(${.CURDIR}/patches.${ARCH}-${OPSYS})
348: PATCHDIR?= ${.CURDIR}/patches.${ARCH}-${OPSYS}
349: .elif exists(${.CURDIR}/patches.${OPSYS})
350: PATCHDIR?= ${.CURDIR}/patches.${OPSYS}
351: .elif exists(${.CURDIR}/patches.${ARCH})
352: PATCHDIR?= ${.CURDIR}/patches.${ARCH}
353: .else
1.1 niklas 354: PATCHDIR?= ${.CURDIR}/patches
1.13 imp 355: .endif
356:
357: .if exists(${.CURDIR}/scripts.${ARCH}-${OPSYS})
358: SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH}-${OPSYS}
359: .elif exists(${.CURDIR}/scripts.${OPSYS})
360: SCRIPTDIR?= ${.CURDIR}/scripts.${OPSYS}
361: .elif exists(${.CURDIR}/scripts.${ARCH})
362: SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH}
363: .else
1.1 niklas 364: SCRIPTDIR?= ${.CURDIR}/scripts
1.13 imp 365: .endif
366:
367: .if exists(${.CURDIR}/files.${ARCH}-${OPSYS})
368: FILESDIR?= ${.CURDIR}/files.${ARCH}-${OPSYS}
369: .elif exists(${.CURDIR}/files.${OPSYS})
370: FILESDIR?= ${.CURDIR}/files.${OPSYS}
371: .elif exists(${.CURDIR}/files.${ARCH})
372: FILESDIR?= ${.CURDIR}/files.${ARCH}
373: .else
1.1 niklas 374: FILESDIR?= ${.CURDIR}/files
1.13 imp 375: .endif
376:
377: .if exists(${.CURDIR}/pkg.${ARCH}-${OPSYS})
378: PKGDIR?= ${.CURDIR}/pkg.${ARCH}-${OPSYS}
379: .elif exists(${.CURDIR}/pkg.${OPSYS})
380: PKGDIR?= ${.CURDIR}/pkg.${OPSYS}
381: .elif exists(${.CURDIR}/pkg.${ARCH})
382: PKGDIR?= ${.CURDIR}/pkg.${ARCH}
383: .else
1.1 niklas 384: PKGDIR?= ${.CURDIR}/pkg
1.13 imp 385: .endif
386:
1.1 niklas 387: .if defined(USE_IMAKE) || defined(USE_X11)
388: PREFIX?= ${X11BASE}
389: .else
390: PREFIX?= ${LOCALBASE}
391: .endif
392: # The following 4 lines should go away as soon as the ports are all updated
393: .if defined(EXEC_DEPENDS)
394: BUILD_DEPENDS+= ${EXEC_DEPENDS}
395: RUN_DEPENDS+= ${EXEC_DEPENDS}
396: .endif
397: .if defined(USE_GMAKE)
1.13 imp 398: BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake
399: .endif
1.15 niklas 400: # OpenBSD has perl5 in-tree
401: #.if defined(USE_PERL5)
402: #BUILD_DEPENDS+= perl5.00401:${PORTSDIR}/lang/perl5
403: #RUN_DEPENDS+= perl5.00401:${PORTSDIR}/lang/perl5
404: #.endif
1.1 niklas 405:
406: .if exists(${PORTSDIR}/../Makefile.inc)
407: .include "${PORTSDIR}/../Makefile.inc"
408: .endif
409:
410: # Don't change these!!! These names are built into the _TARGET_USE macro,
411: # there is no way to refer to them cleanly from within the macro AFAIK.
412: EXTRACT_COOKIE?= ${WRKDIR}/.extract_done
413: CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done
1.32 marc 414: INSTALL_PRE_COOKIE?=${WRKDIR}/.install_started
1.1 niklas 415: INSTALL_COOKIE?= ${WRKDIR}/.install_done
416: BUILD_COOKIE?= ${WRKDIR}/.build_done
417: PATCH_COOKIE?= ${WRKDIR}/.patch_done
418: PACKAGE_COOKIE?= ${WRKDIR}/.package_done
419:
420: # How to do nothing. Override if you, for some strange reason, would rather
421: # do something.
1.6 niklas 422: DO_NADA?= /usr/bin/true
1.1 niklas 423:
424: # Miscellaneous overridable commands:
425: GMAKE?= gmake
426: XMKMF?= xmkmf -a
1.13 imp 427: .if exists(/sbin/md5)
428: MD5?= /sbin/md5
1.9 imp 429: .elif exists(/bin/md5)
1.4 deraadt 430: MD5?= /bin/md5
1.13 imp 431: .elif exists(/usr/bin/md5)
432: MD5?= /usr/bin/md5
1.9 imp 433: .else
1.13 imp 434: MD5?= md5
1.9 imp 435: .endif
1.1 niklas 436: MD5_FILE?= ${FILESDIR}/md5
437:
438: MAKE_FLAGS?= -f
439: MAKEFILE?= Makefile
440: MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}"
441:
1.13 imp 442: .if exists(/usr/bin/fetch)
443: FETCH_CMD?= /usr/bin/fetch
444: .else
1.6 niklas 445: FETCH_CMD?= /usr/bin/ftp
1.9 imp 446: .endif
1.1 niklas 447:
448: TOUCH?= /usr/bin/touch
449: TOUCH_FLAGS?= -f
450:
451: PATCH?= /usr/bin/patch
452: PATCH_STRIP?= -p0
453: PATCH_DIST_STRIP?= -p0
454: .if defined(PATCH_DEBUG)
1.6 niklas 455: PATCH_DEBUG_TMP= yes
1.1 niklas 456: PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP}
457: PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP}
458: .else
1.6 niklas 459: PATCH_DEBUG_TMP= no
1.3 niklas 460: PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
461: PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
1.1 niklas 462: .endif
463: .if defined(BATCH)
464: PATCH_ARGS+= --batch
465: PATCH_DIST_ARGS+= --batch
466: .endif
467:
468: .if defined(PATCH_CHECK_ONLY)
469: PATCH_ARGS+= -C
470: PATCH_DIST_ARGS+= -C
471: .endif
472:
1.9 imp 473: .if exists(/bin/tar)
1.5 tholo 474: EXTRACT_CMD?= /bin/tar
1.9 imp 475: .else
476: EXTRACT_CMD?= /usr/bin/tar
477: .endif
1.1 niklas 478: EXTRACT_SUFX?= .tar.gz
479: # Backwards compatability.
480: .if defined(EXTRACT_ARGS)
481: EXTRACT_BEFORE_ARGS?= ${EXTRACT_ARGS}
482: .else
483: EXTRACT_BEFORE_ARGS?= -xzf
484: .endif
485:
486: # Figure out where the local mtree file is
1.13 imp 487: .if !defined(MTREE_FILE)
488: .if defined(USE_IMAKE) || defined(USE_X11)
489: MTREE_FILE= /etc/mtree/BSD.x11.dist
490: .else
491: MTREE_FILE= /etc/mtree/BSD.local.dist
492: .endif
1.1 niklas 493: .endif
494: MTREE_CMD?= /usr/sbin/mtree
1.13 imp 495: MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -p
1.1 niklas 496:
1.10 niklas 497: .if (${OPSYS} == "OpenBSD")
498: .include <bsd.own.mk>
499: MAKE_ENV+= EXTRA_SYS_MK_INCLUDES="<bsd.own.mk>"
500: .endif
501:
1.6 niklas 502: # A few aliases for *-install targets
503: INSTALL_PROGRAM= \
1.12 millert 504: ${INSTALL} ${INSTALL_COPY} ${INSTALL_STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
1.6 niklas 505: INSTALL_SCRIPT= \
1.12 millert 506: ${INSTALL} ${INSTALL_COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
1.6 niklas 507: INSTALL_DATA= \
1.12 millert 508: ${INSTALL} ${INSTALL_COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
1.6 niklas 509: INSTALL_MAN= \
1.12 millert 510: ${INSTALL} ${INSTALL_COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}
1.6 niklas 511:
1.13 imp 512: INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
513: BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
514: BSD_INSTALL_DATA="${INSTALL_DATA}" \
515: BSD_INSTALL_MAN="${INSTALL_MAN}"
516: MAKE_ENV+= ${INSTALL_MACROS}
517: SCRIPTS_ENV+= ${INSTALL_MACROS}
518:
1.1 niklas 519: # The user can override the NO_PACKAGE by specifying this from
520: # the make command line
521: .if defined(FORCE_PACKAGE)
522: .undef NO_PACKAGE
523: .endif
524:
1.31 marc 525: # Support architecture dependent packing lists
526: #
1.13 imp 527: COMMENT?= ${PKGDIR}/COMMENT
528: DESCR?= ${PKGDIR}/DESCR
1.31 marc 529: .if exists(${PKGDIR}/PLIST.${ARCH})
530: PLIST?= ${PKGDIR}/PLIST.${ARCH}
531: .else
1.13 imp 532: PLIST?= ${PKGDIR}/PLIST
1.31 marc 533: .endif
1.13 imp 534:
1.1 niklas 535: PKG_CMD?= /usr/sbin/pkg_create
536: .if !defined(PKG_ARGS)
1.13 imp 537: PKG_ARGS= -v -c ${COMMENT} -d ${DESCR} -f ${PLIST} -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`"
1.1 niklas 538: .if exists(${PKGDIR}/INSTALL)
539: PKG_ARGS+= -i ${PKGDIR}/INSTALL
540: .endif
541: .if exists(${PKGDIR}/DEINSTALL)
542: PKG_ARGS+= -k ${PKGDIR}/DEINSTALL
543: .endif
544: .if exists(${PKGDIR}/REQ)
545: PKG_ARGS+= -r ${PKGDIR}/REQ
546: .endif
1.9 imp 547: .if exists(${PKGDIR}/MESSAGE)
548: PKG_ARGS+= -D ${PKGDIR}/MESSAGE
549: .endif
1.13 imp 550: .if !defined(NO_MTREE)
551: PKG_ARGS+= -m ${MTREE_FILE}
1.1 niklas 552: .endif
553: .endif
554: PKG_SUFX?= .tgz
555: # where pkg_add records its dirty deeds.
556: PKG_DBDIR?= /var/db/pkg
557:
558: # shared/dynamic motif libs
559: .if defined(HAVE_MOTIF)
560: .if defined(MOTIF_STATIC)
561: MOTIFLIB?= ${X11BASE}/lib/libXm.a
562: .else
563: MOTIFLIB?= -L${X11BASE}/lib -lXm
564: .endif
565: .endif
566:
1.13 imp 567: AWK?= /usr/bin/awk
568: BASENAME?= /usr/bin/basename
1.9 imp 569: CAT?= /bin/cat
1.1 niklas 570: CP?= /bin/cp
1.32 marc 571: DIRNAME?= /usr/bin/dirname
1.13 imp 572: ECHO?= /bin/echo
1.9 imp 573: FALSE?= /usr/bin/false
574: GREP?= /usr/bin/grep
1.13 imp 575: GUNZIP_CMD?= /usr/bin/gunzip -f
1.1 niklas 576: GZCAT?= /usr/bin/gzcat
1.9 imp 577: GZIP?= -9
578: GZIP_CMD?= /usr/bin/gzip -nf ${GZIP}
1.22 niklas 579: LDCONFIG?= [ ! -x /sbin/ldconfig ] || /sbin/ldconfig
1.14 niklas 580: LN?= /bin/ln
1.13 imp 581: MKDIR?= /bin/mkdir -p
582: MV?= /bin/mv
1.18 niklas 583: READLINK?= /usr/bin/readlink
1.13 imp 584: RM?= /bin/rm
585: RMDIR?= /bin/rmdir
1.1 niklas 586: SED?= /usr/bin/sed
1.20 todd 587: PORTSPATH?= ${PATH}:${X11BASE}/bin:${LOCALBASE}/bin
588: SETENV?= /usr/bin/env PATH=${PORTSPATH}
1.13 imp 589: SH?= /bin/sh
590: TR?= /usr/bin/tr
1.1 niklas 591:
592: # Used to print all the '===>' style prompts - override this to turn them off.
593: ECHO_MSG?= ${ECHO}
594:
595: ALL_TARGET?= all
596: INSTALL_TARGET?= install
597:
1.9 imp 598: # Popular master sites
1.13 imp 599: MASTER_SITE_XCONTRIB+= \
600: ftp://crl.dec.com/pub/X11/contrib/%SUBDIR%/ \
601: ftp://ftp.eu.net/X11/contrib/%SUBDIR%/
602:
603: MASTER_SITE_GNU+= \
604: ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ \
605: ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/
606:
607: MASTER_SITE_PERL_CPAN+= \
608: ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ \
609: ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/%SUBDIR%/
610:
611: MASTER_SITE_TEX_CTAN+= \
612: ftp://ftp.cdrom.com/pub/tex/ctan/%SUBDIR%/ \
613: ftp://wuarchive.wustl.edu/packages/TeX/%SUBDIR%/ \
614: ftp://ftp.funet.fi/pub/TeX/CTAN/%SUBDIR%/ \
615: ftp://ftp.tex.ac.uk/public/ctan/tex-archive/%SUBDIR%/ \
616: ftp://ftp.dante.de/tex-archive/%SUBDIR%/
617:
618: MASTER_SITE_SUNSITE+= \
619: ftp://sunsite.unc.edu/pub/Linux/%SUBDIR%/ \
620: ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/%SUBDIR%/ \
621: ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/%SUBDIR%/
622:
623: # Empty declaration to avoid "variable MASTER_SITES recursive" error
624: MASTER_SITES?=
625: PATCH_SITES?=
626:
627: # Substitute subdirectory names
628: MASTER_SITES:= ${MASTER_SITES:S/%SUBDIR%/${MASTER_SITE_SUBDIR}/}
629: PATCH_SITES:= ${PATCH_SITES:S/%SUBDIR%/${PATCH_SITE_SUBDIR}/}
1.9 imp 630:
1.27 marc 631: # Two backup master sites, First one at ftp.openbsd.org
632: #
633: _MASTER_SITE_OPENBSD?= \
1.34 marc 634: ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/${DIST_SUBDIR}/ \
635: ftp://ftp.openbsd.org/pub/OpenBSD/licensed/${DIST_SUBDIR}/
1.27 marc 636:
637: # The second backup master site is ftp.freebsd.org
638: #
639: _MASTER_SITE_FREEBSD?= \
640: ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/
641:
642: # set the backup master sites.
643: #
1.9 imp 644: MASTER_SITE_BACKUP?= \
1.27 marc 645: ${_MASTER_SITE_OPENBSD} ${_MASTER_SITE_FREEBSD}
646:
647: # If the user has this set, go to the OpenBSD repository for everything.
648: #
649: .if defined(MASTER_SITE_OPENBSD)
650: MASTER_SITE_OVERRIDE= ${_MASTER_SITE_OPENBSD}
651: .endif
1.9 imp 652:
653: # If the user has this set, go to the FreeBSD repository for everything.
1.27 marc 654: #
1.1 niklas 655: .if defined(MASTER_SITE_FREEBSD)
1.27 marc 656: MASTER_SITE_OVERRIDE= ${_MASTER_SITE_FREEBSD}
1.1 niklas 657: .endif
658:
1.13 imp 659: # Where to put distfiles that don't have any other master site
1.27 marc 660: # ;;; This is referenced in a few Makefiles -- I'd like to get rid of it
661: #
1.13 imp 662: MASTER_SITE_LOCAL?= \
663: ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/LOCAL_PORTS/
664:
1.1 niklas 665: # I guess we're in the master distribution business! :) As we gain mirror
666: # sites for distfiles, add them to this list.
667: .if !defined(MASTER_SITE_OVERRIDE)
1.9 imp 668: MASTER_SITES+= ${MASTER_SITE_BACKUP}
669: PATCH_SITES+= ${MASTER_SITE_BACKUP}
1.1 niklas 670: .else
671: MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${MASTER_SITES}
672: PATCH_SITES:= ${MASTER_SITE_OVERRIDE} ${PATCH_SITES}
673: .endif
674:
1.28 marc 675: # The following is a FreeBSD construct that dopes not work in OpenBSD.
676: # Since OpenBSD does not put packages in /cdrom/ports/packages it
677: # is safe to leave (but I may remove it in the future).
678: #
1.7 niklas 679: # Search CDROM first if mounted, symlink instead of copy if
680: # FETCH_SYMLINK_DISTFILES is set
681: .if exists(/cdrom/ports/distfiles)
682: MASTER_SITES:= file:/cdrom/ports/distfiles/${DIST_SUBDIR}/ ${MASTER_SITES}
683: PATCH_SITES:= file:/cdrom/ports/distfiles/${DIST_SUBDIR}/ ${PATCH_SITES}
684: .if defined(FETCH_SYMLINK_DISTFILES)
685: FETCH_BEFORE_ARGS+= -l
686: .endif
687: .endif
688:
1.28 marc 689: # OpenBSD code to handle ports distfiles on a CDROM. The distfiles
690: # are located in /cdrom/distfiles/${DIST_SUBDIR}/ (assuming that the
691: # CDROM is mounted on /cdrom).
692: #
693: .if exists(/cdrom/distfiles)
694: CDROM_SITE:= /cdrom/distfiles/${DIST_SUBDIR}
695: .if defined(FETCH_SYMLINK_DISTFILES)
696: CDROM_COPY:= ${LN}
697: CDROM_OPT= -s
698: .else
699: CDROM_COPY:= ${CP}
700: CDROM_OPT= -f
701: .endif
702: .endif
703:
1.1 niklas 704: # Derived names so that they're easily overridable.
705: DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
706: PKGNAME?= ${DISTNAME}
707:
1.9 imp 708: ALLFILES?= ${DISTFILES} ${PATCHFILES}
709:
710: .if defined(IGNOREFILES)
711: CKSUMFILES!= \
712: for file in ${ALLFILES}; do \
713: ignore=0; \
714: for tmp in ${IGNOREFILES}; do \
715: if [ "$$file" = "$$tmp" ]; then \
716: ignore=1; \
717: fi; \
718: done; \
719: if [ "$$ignore" = 0 ]; then \
720: echo "$$file"; \
721: fi; \
722: done
723: .else
724: CKSUMFILES= ${ALLFILES}
725: .endif
726:
727: # List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
728: .if defined(DIST_SUBDIR)
729: _CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
730: _IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
731: .else
732: _CKSUMFILES?= ${CKSUMFILES}
733: _IGNOREFILES?= ${IGNOREFILES}
734: .endif
735:
1.1 niklas 736: # This is what is actually going to be extracted, and is overridable
737: # by user.
738: EXTRACT_ONLY?= ${DISTFILES}
739:
740: # Documentation
741: MAINTAINER?= ports@FreeBSD.ORG
1.9 imp 742:
743: .if !defined(CATEGORIES)
744: .BEGIN:
745: @${ECHO_MSG} "CATEGORIES is mandatory."
746: @${FALSE}
747: .endif
1.1 niklas 748:
749: # Note this has to start with a capital letter (or more accurately, it
750: # shouldn't match "[a-z]*"), see the target "delete-package-links" below.
751: PKGREPOSITORYSUBDIR?= All
752: PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
753: .if exists(${PACKAGES})
754: PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
755: .else
756: PKGFILE?= ${PKGNAME}${PKG_SUFX}
757: .endif
758:
759: CONFIGURE_SCRIPT?= configure
760:
761: .if defined(GNU_CONFIGURE)
762: CONFIGURE_ARGS+= --prefix=${PREFIX}
763: HAS_CONFIGURE= yes
764: .endif
765:
1.13 imp 766: # Passed to most of script invocations
767: SCRIPTS_ENV+= CURDIR=${.CURDIR} DISTDIR=${DISTDIR} \
768: WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
769: SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
770: PORTSDIR=${PORTSDIR} DEPENDS="${DEPENDS}" \
771: PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
772:
773: .if defined(BATCH)
774: SCRIPTS_ENV+= BATCH=yes
775: .endif
776:
1.9 imp 777: MANPREFIX?= ${PREFIX}
778:
779: .for sect in 1 2 3 4 5 6 7 8 9
780: MAN${sect}PREFIX?= ${MANPREFIX}
781: .endfor
782: MANLPREFIX?= ${MANPREFIX}
783: MANNPREFIX?= ${MANPREFIX}
784:
785: MANLANG?= "" # english only by default
786:
787: .for lang in ${MANLANG}
788:
789: .for sect in 1 2 3 4 5 6 7 8 9
790: .if defined(MAN${sect})
791: _MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect}/%}
792: .endif
793: .endfor
794:
795: .if defined(MANL)
796: _MANPAGES+= ${MANL:S%^%${MANLPREFIX}/man/${lang}/manl/%}
797: .endif
798:
799: .if defined(MANN)
800: _MANPAGES+= ${MANN:S%^%${MANNPREFIX}/man/${lang}/mann/%}
801: .endif
802:
803: .endfor
804:
805: .if defined(_MANPAGES) && defined(MANCOMPRESSED)
806: _MANPAGES:= ${_MANPAGES:S/$/.gz/}
807: .endif
808:
1.1 niklas 809: .MAIN: all
810:
811: ################################################################
812: # Many ways to disable a port.
813: #
814: # If we're in BATCH mode and the port is interactive, or we're
815: # in interactive mode and the port is non-interactive, skip all
816: # the important targets. The reason we have two modes is that
817: # one might want to leave a build in BATCH mode running
818: # overnight, then come back in the morning and do _only_ the
819: # interactive ones that required your intervention.
820: #
821: # Don't attempt to build ports that require Motif if you don't
822: # have Motif.
823: #
824: # Ignore ports that can't be resold if building for a CDROM.
825: #
826: # Don't build a port if it's restricted and we don't want to get
827: # into that.
828: #
829: # Don't build a port if it's broken.
1.27 marc 830: #
831: # Don't build a port if it comes with the base system.
1.1 niklas 832: ################################################################
833:
1.13 imp 834: .if !defined(NO_IGNORE)
1.9 imp 835: .if (defined(IS_INTERACTIVE) && defined(BATCH))
836: IGNORE= "is an interactive port"
837: .elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
838: IGNORE= "is not an interactive port"
839: .elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF))
840: IGNORE= "requires Motif"
1.13 imp 841: .elif (defined(MOTIF_ONLY) && !defined(REQUIRES_MOTIF))
842: IGNORE= "does not require Motif"
1.9 imp 843: .elif (defined(NO_CDROM) && defined(FOR_CDROM))
844: IGNORE= "may not be placed on a CDROM: ${NO_CDROM}"
845: .elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
846: IGNORE= "is restricted: ${RESTRICTED}"
1.13 imp 847: .elif ((defined(USE_IMAKE) || defined(USE_X11)) && !exists(${X11BASE}))
848: IGNORE= "uses X11, but ${X11BASE} not found"
1.9 imp 849: .elif defined(BROKEN)
850: IGNORE= "is marked as broken: ${BROKEN}"
1.29 marc 851: .elif defined(ONLY_FOR_ARCHS)
852: .for __ARCH in ${ONLY_FOR_ARCHS}
853: .if ${MACHINE} == "${__ARCH}"
854: __ARCH_OK= 1
855: .endif
856: .endfor
857: .if !defined(__ARCH_OK)
858: IGNORE= "is only for ${ONLY_FOR_ARCHS}, not ${MACHINE}"
859: .endif
1.27 marc 860: .elif defined(COMES_WITH)
1.32 marc 861: .if ( ${OPSYS_VER} >= ${COMES_WITH} )
1.27 marc 862: IGNORE= "comes with ${OPSYS} as of release ${COMES_WITH}"
863: .endif
1.1 niklas 864: .endif
865:
866: .if defined(IGNORE)
1.9 imp 867: .if defined(IGNORE_SILENT)
868: IGNORECMD= ${DO_NADA}
869: .else
870: IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} ${IGNORE}."
871: .endif
872: fetch:
873: @${IGNORECMD}
874: checksum:
875: @${IGNORECMD}
876: extract:
877: @${IGNORECMD}
878: patch:
879: @${IGNORECMD}
880: configure:
881: @${IGNORECMD}
1.1 niklas 882: all:
1.9 imp 883: @${IGNORECMD}
1.1 niklas 884: build:
1.9 imp 885: @${IGNORECMD}
1.1 niklas 886: install:
1.9 imp 887: @${IGNORECMD}
1.1 niklas 888: package:
1.9 imp 889: @${IGNORECMD}
1.1 niklas 890: .endif
1.13 imp 891: .endif
1.1 niklas 892:
893: .if defined(ALL_HOOK)
894: all:
1.6 niklas 895: @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
1.1 niklas 896: DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \
897: PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
898: FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
899: DEPENDS="${DEPENDS}" BUILD_DEPENDS="${BUILD_DEPENDS}" \
900: RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \
901: ${ALL_HOOK}
902: .endif
903:
904: .if !target(all)
905: all: build
906: .endif
907:
1.13 imp 908: .if !defined(DEPENDS_TARGET)
909: .if make(reinstall)
910: DEPENDS_TARGET= reinstall
911: .else
912: DEPENDS_TARGET= install
1.1 niklas 913: .endif
914: .endif
915:
916: ################################################################
917: # The following are used to create easy dummy targets for
918: # disabling some bit of default target behavior you don't want.
919: # They still check to see if the target exists, and if so don't
920: # do anything, since you might want to set this globally for a
921: # group of ports in a Makefile.inc, but still be able to
922: # override from an individual Makefile.
923: ################################################################
924:
1.9 imp 925: # Disable checksum
926: .if defined(NO_CHECKSUM) && !target(checksum)
927: checksum: fetch
928: @${DO_NADA}
929: .endif
930:
1.1 niklas 931: # Disable extract
932: .if defined(NO_EXTRACT) && !target(extract)
933: extract: checksum
934: @${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
935: checksum: fetch
936: @${DO_NADA}
937: makesum:
938: @${DO_NADA}
939: .endif
940:
1.9 imp 941: # Disable patch
942: .if defined(NO_PATCH) && !target(patch)
943: patch: extract
944: @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
945: .endif
946:
1.1 niklas 947: # Disable configure
948: .if defined(NO_CONFIGURE) && !target(configure)
949: configure: patch
950: @${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
951: .endif
952:
953: # Disable build
954: .if defined(NO_BUILD) && !target(build)
955: build: configure
956: @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
957: .endif
958:
1.9 imp 959: # Disable install
960: .if defined(NO_INSTALL) && !target(install)
961: install: build
962: @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
963: .endif
964:
1.1 niklas 965: # Disable package
966: .if defined(NO_PACKAGE) && !target(package)
967: package:
1.9 imp 968: .if defined(IGNORE_SILENT)
1.1 niklas 969: @${DO_NADA}
1.9 imp 970: .else
971: @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
1.1 niklas 972: .endif
973: .endif
974:
1.9 imp 975: # Disable describe
976: .if defined(NO_DESCRIBE) && !target(describe)
977: describe:
978: @${DO_NADA}
1.1 niklas 979: .endif
980:
981: ################################################################
982: # More standard targets start here.
983: #
984: # These are the body of the build/install framework. If you are
985: # not happy with the default actions, and you can't solve it by
986: # adding pre-* or post-* targets/scripts, override these.
987: ################################################################
988:
989: # Fetch
990:
991: .if !target(do-fetch)
992: do-fetch:
1.9 imp 993: @${MKDIR} ${_DISTDIR}
994: @(cd ${_DISTDIR}; \
1.1 niklas 995: for file in ${DISTFILES}; do \
996: if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
997: if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
1.9 imp 998: ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
1.1 niklas 999: ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
1000: ${ECHO_MSG} ">> Please correct this problem and try again."; \
1001: exit 1; \
1.28 marc 1002: fi ; \
1003: if [ ! -z ${CDROM_COPY} ]; then \
1004: if ${CDROM_COPY} ${CDROM_OPT} ${CDROM_SITE}/$$file .; then \
1005: continue; \
1006: fi ; \
1.1 niklas 1007: fi ; \
1008: ${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
1009: for site in ${MASTER_SITES}; do \
1010: ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
1.6 niklas 1011: if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
1.1 niklas 1012: continue 2; \
1013: fi \
1014: done; \
1.6 niklas 1015: ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
1.9 imp 1016: ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
1.1 niklas 1017: exit 1; \
1018: fi \
1019: done)
1020: .if defined(PATCHFILES)
1.9 imp 1021: @(cd ${_DISTDIR}; \
1.1 niklas 1022: for file in ${PATCHFILES}; do \
1023: if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
1024: if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
1.9 imp 1025: ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
1.1 niklas 1026: ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
1027: ${ECHO_MSG} ">> Please correct this problem and try again."; \
1028: exit 1; \
1029: fi ; \
1030: ${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
1031: for site in ${PATCH_SITES}; do \
1032: ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
1.6 niklas 1033: if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
1.1 niklas 1034: continue 2; \
1035: fi \
1036: done; \
1.6 niklas 1037: ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
1.9 imp 1038: ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
1.1 niklas 1039: exit 1; \
1040: fi \
1041: done)
1042: .endif
1043: .endif
1044:
1045: # Extract
1046:
1047: .if !target(do-extract)
1048: do-extract:
1.6 niklas 1049: .if !defined(NO_WRKDIR)
1.14 niklas 1050: .if defined(WRKOBJDIR)
1051: @${RM} -rf ${WRKOBJDIR}/${PORTSUBDIR}
1.18 niklas 1052: @${MKDIR} ${WRKOBJDIR}/${PORTSUBDIR}
1053: @if [ ! -L ${WRKDIR} ] || \
1054: [ X`${READLINK} ${WRKDIR}` != X${WRKOBJDIR}/${PORTSUBDIR} ]; then \
1055: echo "${WRKDIR} -> ${WRKOBJDIR}/${PORTSUBDIR}"; \
1056: ${RM} -f ${WRKDIR}; \
1057: ${LN} -sf ${WRKOBJDIR}/${PORTSUBDIR} ${WRKDIR}; \
1058: fi
1.14 niklas 1059: .else
1.1 niklas 1060: @${RM} -rf ${WRKDIR}
1.9 imp 1061: @${MKDIR} ${WRKDIR}
1.6 niklas 1062: .endif
1.14 niklas 1063: .endif
1.1 niklas 1064: @for file in ${EXTRACT_ONLY}; do \
1.10 niklas 1065: if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
1.1 niklas 1066: then \
1067: exit 1; \
1068: fi \
1069: done
1070: .endif
1071:
1072: # Patch
1073:
1074: .if !target(do-patch)
1075: do-patch:
1076: .if defined(PATCHFILES)
1077: @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}"
1.9 imp 1078: @(cd ${_DISTDIR}; \
1.1 niklas 1079: for i in ${PATCHFILES}; do \
1.6 niklas 1080: if [ ${PATCH_DEBUG_TMP} = yes ]; then \
1081: ${ECHO_MSG} "===> Applying distribution patch $$i" ; \
1082: fi; \
1.1 niklas 1083: case $$i in \
1084: *.Z|*.gz) \
1085: ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
1086: ;; \
1087: *) \
1088: ${PATCH} ${PATCH_DIST_ARGS} < $$i; \
1089: ;; \
1090: esac; \
1091: done)
1092: .endif
1093: @if [ -d ${PATCHDIR} ]; then \
1.6 niklas 1094: if [ "`echo ${PATCHDIR}/patch-*`" = "${PATCHDIR}/patch-*" ]; then \
1095: ${ECHO_MSG} "===> Ignoring empty patch directory"; \
1096: if [ -d ${PATCHDIR}/CVS ]; then \
1097: ${ECHO_MSG} "===> Perhaps you forgot the -P flag to cvs co or update?"; \
1098: fi; \
1099: else \
1.9 imp 1100: ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \
1.6 niklas 1101: for i in ${PATCHDIR}/patch-*; do \
1102: case $$i in \
1.13 imp 1103: *.orig|*.rej|*~) \
1.6 niklas 1104: ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
1105: ;; \
1106: *) \
1107: if [ ${PATCH_DEBUG_TMP} = yes ]; then \
1.9 imp 1108: ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
1.6 niklas 1109: fi; \
1110: ${PATCH} ${PATCH_ARGS} < $$i; \
1111: ;; \
1112: esac; \
1113: done; \
1114: fi; \
1.1 niklas 1115: fi
1116: .endif
1117:
1118: # Configure
1119:
1120: .if !target(do-configure)
1121: do-configure:
1.7 niklas 1122: @if [ -f ${SCRIPTDIR}/configure ]; then \
1.13 imp 1123: cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
1124: ${SCRIPTDIR}/configure; \
1.1 niklas 1125: fi
1126: .if defined(HAS_CONFIGURE)
1.6 niklas 1127: @(cd ${WRKSRC} && CC="${CC}" ac_cv_path_CC="${CC}" CFLAGS="${CFLAGS}" \
1.1 niklas 1128: INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \
1.6 niklas 1129: INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
1.1 niklas 1130: ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS})
1131: .endif
1132: .if defined(USE_IMAKE)
1.20 todd 1133: @(cd ${WRKSRC} && ${SETENV} ${XMKMF})
1.1 niklas 1134: .endif
1135: .endif
1136:
1137: # Build
1138:
1139: .if !target(do-build)
1140: do-build:
1141: .if defined(USE_GMAKE)
1142: @(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET})
1143: .else defined(USE_GMAKE)
1144: @(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET})
1145: .endif
1146: .endif
1147:
1148: # Install
1149:
1150: .if !target(do-install)
1151: do-install:
1152: .if defined(USE_GMAKE)
1.6 niklas 1153: @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
1.1 niklas 1154: .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
1.6 niklas 1155: @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} install.man)
1.1 niklas 1156: .endif
1157: .else defined(USE_GMAKE)
1.6 niklas 1158: @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
1.1 niklas 1159: .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
1.6 niklas 1160: @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} install.man)
1.1 niklas 1161: .endif
1162: .endif
1163: .endif
1164:
1165: # Package
1166:
1167: .if !target(do-package)
1168: do-package:
1.13 imp 1169: @if [ -e ${PLIST} ]; then \
1.1 niklas 1170: ${ECHO_MSG} "===> Building package for ${PKGNAME}"; \
1171: if [ -d ${PACKAGES} ]; then \
1172: if [ ! -d ${PKGREPOSITORY} ]; then \
1.9 imp 1173: if ! ${MKDIR} ${PKGREPOSITORY}; then \
1.1 niklas 1174: ${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \
1175: exit 1; \
1176: fi; \
1177: fi; \
1178: fi; \
1179: if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
1180: if [ -d ${PACKAGES} ]; then \
1181: ${MAKE} ${.MAKEFLAGS} package-links; \
1182: fi; \
1183: else \
1184: ${MAKE} ${.MAKEFLAGS} delete-package; \
1185: exit 1; \
1186: fi; \
1187: fi
1188: .endif
1189:
1190: # Some support rules for do-package
1191:
1192: .if !target(package-links)
1193: package-links:
1194: @${MAKE} ${.MAKEFLAGS} delete-package-links
1195: @for cat in ${CATEGORIES}; do \
1196: if [ ! -d ${PACKAGES}/$$cat ]; then \
1.9 imp 1197: if ! ${MKDIR} ${PACKAGES}/$$cat; then \
1.1 niklas 1198: ${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \
1199: exit 1; \
1200: fi; \
1201: fi; \
1202: ln -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
1203: done;
1204: .endif
1205:
1206: .if !target(delete-package-links)
1207: delete-package-links:
1208: @${RM} -f ${PACKAGES}/[a-z]*/${PKGNAME}${PKG_SUFX};
1209: .endif
1210:
1211: .if !target(delete-package)
1212: delete-package:
1213: @${MAKE} ${.MAKEFLAGS} delete-package-links
1214: @${RM} -f ${PKGFILE}
1215: .endif
1216:
1217: ################################################################
1218: # This is the "generic" port target, actually a macro used from the
1219: # six main targets. See below for more.
1220: ################################################################
1221:
1222: _PORT_USE: .USE
1223: .if make(real-fetch)
1.6 niklas 1224: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
1.1 niklas 1225: .endif
1226: .if make(real-extract)
1.6 niklas 1227: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends lib-depends misc-depends
1.1 niklas 1228: .endif
1229: .if make(real-install)
1.13 imp 1230: .if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
1.36 ! todd 1231: @if [ -d ${PKG_DBDIR}/${PKGNAME} -o "X$$(ls -d ${PKG_DBDIR}/${PKGNAME:C/-.*//g}-*> 2> /dev/null)" != "X" ]; then \
1.13 imp 1232: ${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \
1233: ${ECHO_MSG} " If so, you may wish to \`\`pkg_delete ${PKGNAME}'' and install"; \
1234: ${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \
1235: ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGNAME}"; \
1236: ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
1237: ${ECHO_MSG} " in your environment or the \"make install\" command line."; \
1238: exit 1; \
1239: fi
1240: .endif
1.14 niklas 1241: @if [ `${SH} -c umask` != ${DEF_UMASK} ]; then \
1.13 imp 1242: ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \
1243: ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
1244: ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
1245: fi
1.9 imp 1246: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends lib-depends
1.1 niklas 1247: .endif
1248: .if make(real-install)
1249: .if !defined(NO_MTREE)
1250: @if [ `id -u` = 0 ]; then \
1.13 imp 1251: if [ ! -f ${MTREE_FILE} ]; then \
1252: ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
1253: ${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \
1254: exit 1; \
1255: else \
1256: ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/; \
1257: fi; \
1.1 niklas 1258: else \
1259: ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
1260: ${ECHO_MSG} "Become root and try again to ensure correct permissions."; \
1261: fi
1262: .endif
1263: .endif
1.6 niklas 1264: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/}
1.1 niklas 1265: @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
1.13 imp 1266: cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
1267: ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
1.1 niklas 1268: fi
1.6 niklas 1269: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/}
1270: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/}
1.1 niklas 1271: @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
1.13 imp 1272: cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
1273: ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \
1.1 niklas 1274: fi
1.9 imp 1275: .if make(real-install) && defined(_MANPAGES)
1276: .if defined(MANCOMPRESSED) && defined(NOMANCOMPRESS)
1277: @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
1278: .for manpage in ${_MANPAGES}
1279: @${GUNZIP_CMD} ${manpage}
1280: .endfor
1281: .elif !defined(MANCOMPRESSED) && !defined(NOMANCOMPRESS)
1282: @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
1283: .for manpage in ${_MANPAGES}
1284: @${GZIP_CMD} ${manpage}
1285: .endfor
1286: .endif
1287: .endif
1288: .if make(real-install) && !defined(NO_PKG_REGISTER)
1.6 niklas 1289: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg
1.1 niklas 1290: .endif
1291: .if !make(real-fetch) \
1292: && (!make(real-patch) || !defined(PATCH_CHECK_ONLY)) \
1293: && (!make(real-package) || !defined(PACKAGE_NOINSTALL))
1294: @${TOUCH} ${TOUCH_FLAGS} ${WRKDIR}/.${.TARGET:S/^real-//}_done
1295: .endif
1296:
1297: ################################################################
1298: # Skeleton targets start here
1299: #
1300: # You shouldn't have to change these. Either add the pre-* or
1301: # post-* targets/scripts or redefine the do-* targets. These
1302: # targets don't do anything other than checking for cookies and
1303: # call the necessary targets/scripts.
1304: ################################################################
1305:
1306: .if !target(fetch)
1307: fetch:
1.6 niklas 1308: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-fetch
1.1 niklas 1309: .endif
1310:
1311: .if !target(extract)
1312: extract: checksum ${EXTRACT_COOKIE}
1313: .endif
1314:
1315: .if !target(patch)
1316: patch: extract ${PATCH_COOKIE}
1317: .endif
1318:
1319: .if !target(configure)
1320: configure: patch ${CONFIGURE_COOKIE}
1321: .endif
1322:
1323: .if !target(build)
1324: build: configure ${BUILD_COOKIE}
1325: .endif
1326:
1327: .if !target(install)
1328: install: build ${INSTALL_COOKIE}
1329: .endif
1330:
1331: .if !target(package)
1332: package: install ${PACKAGE_COOKIE}
1333: .endif
1334:
1335: ${EXTRACT_COOKIE}:
1.6 niklas 1336: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-extract
1.1 niklas 1337: ${PATCH_COOKIE}:
1.6 niklas 1338: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-patch
1.1 niklas 1339: ${CONFIGURE_COOKIE}:
1.6 niklas 1340: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-configure
1.1 niklas 1341: ${BUILD_COOKIE}:
1.6 niklas 1342: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build
1.1 niklas 1343: ${INSTALL_COOKIE}:
1.32 marc 1344: @touch ${INSTALL_PRE_COOKIE}
1.6 niklas 1345: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-install
1.1 niklas 1346: ${PACKAGE_COOKIE}:
1.6 niklas 1347: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-package
1.1 niklas 1348:
1349: # And call the macros
1350:
1351: real-fetch: _PORT_USE
1352: real-extract: _PORT_USE
1353: @${ECHO_MSG} "===> Extracting for ${PKGNAME}"
1354: real-patch: _PORT_USE
1355: @${ECHO_MSG} "===> Patching for ${PKGNAME}"
1356: real-configure: _PORT_USE
1357: @${ECHO_MSG} "===> Configuring for ${PKGNAME}"
1358: real-build: _PORT_USE
1359: @${ECHO_MSG} "===> Building for ${PKGNAME}"
1360: real-install: _PORT_USE
1361: @${ECHO_MSG} "===> Installing for ${PKGNAME}"
1362: real-package: _PORT_USE
1363:
1364: # Empty pre-* and post-* targets, note we can't use .if !target()
1365: # in the _PORT_USE macro
1366:
1367: .for name in fetch extract patch configure build install package
1368:
1369: .if !target(pre-${name})
1370: pre-${name}:
1371: @${DO_NADA}
1372: .endif
1373:
1374: .if !target(post-${name})
1375: post-${name}:
1376: @${DO_NADA}
1377: .endif
1378:
1379: .endfor
1380:
1381: # Checkpatch
1382: #
1383: # Special target to verify patches
1384:
1385: .if !target(checkpatch)
1386: checkpatch:
1.6 niklas 1387: @cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${.MAKEFLAGS} patch
1.1 niklas 1388: .endif
1389:
1390: # Reinstall
1391: #
1392: # Special target to re-run install
1393:
1394: .if !target(reinstall)
1.13 imp 1395: reinstall:
1.32 marc 1396: @${RM} -f ${INSTALL_PRE_COOKIE} ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
1.13 imp 1397: @DEPENDS_TARGET=${DEPENDS_TARGET} ${MAKE} install
1.1 niklas 1398: .endif
1399:
1400: ################################################################
1401: # Some more targets supplied for users' convenience
1402: ################################################################
1403:
1404: # Cleaning up
1405:
1406: .if !target(pre-clean)
1407: pre-clean:
1408: @${DO_NADA}
1409: .endif
1410:
1411: .if !target(clean)
1412: clean: pre-clean
1.9 imp 1413: .if !defined(NOCLEANDEPENDS)
1414: @${MAKE} clean-depends
1415: .endif
1.1 niklas 1416: @${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
1.6 niklas 1417: .if !defined(NO_WRKDIR)
1.9 imp 1418: @if [ -d ${WRKDIR} ]; then \
1419: if [ -w ${WRKDIR} ]; then \
1420: ${RM} -rf ${WRKDIR}; \
1421: else \
1422: ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \
1423: fi; \
1424: fi
1.6 niklas 1425: .else
1.1 niklas 1426: @${RM} -f ${WRKDIR}/.*_done
1427: .endif
1428: .endif
1429:
1.9 imp 1430: .if !target(pre-distclean)
1431: pre-distclean:
1432: @${DO_NADA}
1433: .endif
1434:
1435: .if !target(distclean)
1436: distclean: pre-distclean clean
1437: @${ECHO_MSG} "===> Dist cleaning for ${PKGNAME}"
1.13 imp 1438: @(if [ -d ${_DISTDIR} ]; then \
1439: cd ${_DISTDIR}; \
1440: ${RM} -f ${DISTFILES} ${PATCHFILES}; \
1441: fi)
1.9 imp 1442: .if defined(DIST_SUBDIR)
1.13 imp 1443: -@${RMDIR} ${_DISTDIR}
1.9 imp 1444: .endif
1445: .endif
1446:
1.1 niklas 1447: # Prints out a list of files to fetch (useful to do a batch fetch)
1448:
1449: .if !target(fetch-list)
1450: fetch-list:
1.9 imp 1451: @${MKDIR} ${_DISTDIR}
1452: @(cd ${_DISTDIR}; \
1.1 niklas 1453: for file in ${DISTFILES}; do \
1454: if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
1455: for site in ${MASTER_SITES}; do \
1.6 niklas 1456: ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '||' ; \
1.1 niklas 1457: break; \
1458: done; \
1459: ${ECHO} "echo $${file} not fetched" ; \
1460: fi \
1461: done)
1462: .if defined(PATCHFILES)
1.9 imp 1463: @(cd ${_DISTDIR}; \
1.1 niklas 1464: for file in ${PATCHFILES}; do \
1465: if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
1466: for site in ${PATCH_SITES}; do \
1.6 niklas 1467: ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '||' ; \
1.1 niklas 1468: break; \
1469: done; \
1470: ${ECHO} "echo $${file} not fetched" ; \
1471: fi \
1472: done)
1473: .endif
1474: .endif
1475:
1476: # Checksumming utilities
1477:
1478: .if !target(makesum)
1479: makesum: fetch
1.9 imp 1480: @${MKDIR} ${FILESDIR}
1.1 niklas 1481: @if [ -f ${MD5_FILE} ]; then ${RM} -f ${MD5_FILE}; fi
1482: @(cd ${DISTDIR}; \
1.9 imp 1483: for file in ${_CKSUMFILES}; do \
1.1 niklas 1484: ${MD5} $$file >> ${MD5_FILE}; \
1485: done)
1.9 imp 1486: @for file in ${_IGNOREFILES}; do \
1487: ${ECHO} "MD5 ($$file) = IGNORE" >> ${MD5_FILE}; \
1488: done
1.1 niklas 1489: .endif
1490:
1491: .if !target(checksum)
1492: checksum: fetch
1493: @if [ ! -f ${MD5_FILE} ]; then \
1494: ${ECHO_MSG} ">> No MD5 checksum file."; \
1495: else \
1.9 imp 1496: (cd ${DISTDIR}; OK="true"; \
1497: for file in ${_CKSUMFILES}; do \
1.6 niklas 1498: CKSUM=`${MD5} < $$file`; \
1.13 imp 1499: CKSUM2=`${GREP} "^MD5 ($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
1.1 niklas 1500: if [ "$$CKSUM2" = "" ]; then \
1.9 imp 1501: ${ECHO_MSG} ">> No checksum recorded for $$file."; \
1502: OK="false"; \
1503: elif [ "$$CKSUM2" = "IGNORE" ]; then \
1504: ${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \
1505: ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
1.1 niklas 1506: OK="false"; \
1.13 imp 1507: elif [ "$$CKSUM" = "$$CKSUM2" ]; then \
1508: ${ECHO_MSG} ">> Checksum OK for $$file."; \
1509: else \
1.9 imp 1510: ${ECHO_MSG} ">> Checksum mismatch for $$file."; \
1.13 imp 1511: OK="false"; \
1.1 niklas 1512: fi; \
1513: done; \
1.9 imp 1514: for file in ${_IGNOREFILES}; do \
1515: CKSUM2=`${GREP} "($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
1516: if [ "$$CKSUM2" = "" ]; then \
1517: ${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
1518: OK="false"; \
1519: elif [ "$$CKSUM2" != "IGNORE" ]; then \
1520: ${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \
1521: ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
1522: OK="false"; \
1523: fi; \
1524: done; \
1.13 imp 1525: if [ "$$OK" != "true" ]; then \
1526: ${ECHO_MSG} "Make sure the Makefile and md5 file (${MD5_FILE})"; \
1527: ${ECHO_MSG} "are up to date. If you want to override this check, type"; \
1528: ${ECHO_MSG} "\"make NO_CHECKSUM=yes [other args]\"."; \
1529: exit 1; \
1.1 niklas 1530: fi) ; \
1531: fi
1.32 marc 1532: .endif
1533:
1534: # packing list utilities. This generates a packing list from a recently
1535: # installed port. Not perfect, but pretty close. The generated file
1536: # will have to have some tweaks done by hand.
1.35 marc 1537: # Note: add @comment PACKAGE(arch=${ARCH}, opsys=${OPSYS}, vers=${OPSYS_VER})
1538: # when port is installed or package created.
1.32 marc 1539: #
1540: .if !target(plist)
1541: plist: install
1542: @${MKDIR} ${PKGDIR}
1543: @(dirs=""; \
1544: ld=""; \
1.33 marc 1545: ${ECHO} "@cwd ${PREFIX}"; \
1546: ${ECHO} "@name ${PKGNAME}"; \
1.32 marc 1547: for f in `${MAKE} package-depends|sort -u`; do ${ECHO} "@pkgdep $$f"; done; \
1548: for f in `find ${PREFIX} -newer ${INSTALL_PRE_COOKIE} -print 2> /dev/null`; do \
1549: ff=`${ECHO} $$f | ${SED} -e 's|^${PREFIX}/||'`; \
1550: if [ -d $$f ]; then dirs="$$ff $$dirs"; \
1551: else \
1552: ${ECHO} $$ff; \
1.33 marc 1553: if ${ECHO} $$f | ${GREP} -E -q -e '[^/]+\.a$$'; then \
1554: ${ECHO} '@exec ranlib %D/%F'; \
1555: elif ${ECHO} $$f | ${GREP} -E -q -e '[^/]+\.so\.[0-9]+\.[0-9]+$$'; then \
1.32 marc 1556: ld="$$LDCONFIG `${DIRNAME} $$f`"; \
1557: fi; \
1558: fi; \
1559: done; \
1560: for f in $$dirs; do \
1561: if ${GREP} -q -e `${BASENAME} $$f` ${MTREE_FILE}; then \
1562: :; \
1563: else \
1564: ${ECHO} "@dirrm $$f"; \
1565: fi; \
1566: done; \
1567: for f in $$ld; do ${ECHO} "@exec ${LDCONFIG} -m $$f"; done; \
1568: ) > ${PLIST}-auto
1.1 niklas 1569: .endif
1570:
1571: ################################################################
1572: # The special package-building targets
1573: # You probably won't need to touch these
1574: ################################################################
1575:
1576: # Nobody should want to override this unless PKGNAME is simply bogus.
1577:
1578: .if !target(package-name)
1579: package-name:
1580: @${ECHO} ${PKGNAME}
1581: .endif
1582:
1583: # Show (recursively) all the packages this package depends on.
1584:
1585: .if !target(package-depends)
1586: package-depends:
1.13 imp 1587: @for dir in `${ECHO} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
1588: if [ -d $$dir ]; then \
1589: (cd $$dir ; ${MAKE} package-name package-depends); \
1590: else \
1591: ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \
1592: fi; \
1.1 niklas 1593: done
1594: .endif
1595:
1596: # Build a package but don't check the package cookie
1597:
1598: .if !target(repackage)
1599: repackage: pre-repackage package
1600:
1601: pre-repackage:
1602: @${RM} -f ${PACKAGE_COOKIE}
1603: .endif
1604:
1605: # Build a package but don't check the cookie for installation, also don't
1606: # install package cookie
1607:
1608: .if !target(package-noinstall)
1609: package-noinstall:
1.6 niklas 1610: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
1.1 niklas 1611: .endif
1612:
1613: ################################################################
1614: # Dependency checking
1615: ################################################################
1616:
1617: .if !target(depends)
1618: depends: lib-depends misc-depends
1.6 niklas 1619: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
1620: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends
1621: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends
1.1 niklas 1622:
1623: .if make(fetch-depends)
1624: DEPENDS_TMP+= ${FETCH_DEPENDS}
1625: .endif
1626:
1627: .if make(build-depends)
1628: DEPENDS_TMP+= ${BUILD_DEPENDS}
1629: .endif
1630:
1631: .if make(run-depends)
1632: DEPENDS_TMP+= ${RUN_DEPENDS}
1633: .endif
1634:
1635: _DEPENDS_USE: .USE
1636: .if defined(DEPENDS_TMP)
1.13 imp 1637: .if !defined(NO_DEPENDS)
1.20 todd 1638: @PATH=${PORTSPATH}; for i in ${DEPENDS_TMP}; do \
1.1 niklas 1639: prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
1.13 imp 1640: dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
1641: if expr "$$dir" : '.*:' > /dev/null; then \
1642: target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
1643: dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
1.1 niklas 1644: else \
1.13 imp 1645: target=${DEPENDS_TARGET}; \
1.1 niklas 1646: fi; \
1647: if expr "$$prog" : \\/ >/dev/null; then \
1648: if [ -e "$$prog" ]; then \
1649: ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \
1650: notfound=0; \
1651: else \
1652: ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \
1653: notfound=1; \
1654: fi; \
1655: else \
1.9 imp 1656: if which "$$prog" > /dev/null 2>&1 ; then \
1.1 niklas 1657: ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \
1658: notfound=0; \
1659: else \
1660: ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \
1661: notfound=1; \
1662: fi; \
1663: fi; \
1664: if [ $$notfound != 0 ]; then \
1.13 imp 1665: ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \
1.1 niklas 1666: if [ ! -d "$$dir" ]; then \
1667: ${ECHO_MSG} ">> No directory for $$prog. Skipping.."; \
1668: else \
1.13 imp 1669: (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
1.1 niklas 1670: ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
1671: fi; \
1672: fi; \
1673: done
1674: .endif
1675: .else
1676: @${DO_NADA}
1677: .endif
1678:
1679: fetch-depends: _DEPENDS_USE
1680: build-depends: _DEPENDS_USE
1681: run-depends: _DEPENDS_USE
1682:
1683: lib-depends:
1684: .if defined(LIB_DEPENDS)
1.13 imp 1685: .if !defined(NO_DEPENDS)
1.16 niklas 1686: .if (${MACHINE_ARCH} == "alpha")
1687: @for i in ${LIB_DEPENDS}; do \
1.24 niklas 1688: lib=`${ECHO} $$i | ${SED} -e 's/\\\.[0-9][0-9]*\\\.[0-9]*:.*//'`; \
1.16 niklas 1689: dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
1690: if expr "$$dir" : '.*:' > /dev/null; then \
1691: target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
1692: dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
1693: else \
1694: target=${DEPENDS_TARGET}; \
1695: fi; \
1.17 niklas 1696: tmp=`mktemp /tmp/bpmXXXXXXXXXX`; \
1697: if ${LD} -r -o $$tmp -l$$lib; then \
1.16 niklas 1698: ${ECHO_MSG} "===> ${PKGNAME} depends on library: $$lib - found"; \
1699: else \
1700: ${ECHO_MSG} "===> ${PKGNAME} depends on library: $$lib - not found"; \
1701: ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \
1702: if [ ! -d "$$dir" ]; then \
1703: ${ECHO_MSG} ">> No directory for $$lib. Skipping.."; \
1704: else \
1705: (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
1706: ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
1707: fi; \
1708: fi; \
1.17 niklas 1709: ${RM} -f $$tmp; \
1.16 niklas 1710: done
1711: .else
1.1 niklas 1712: @for i in ${LIB_DEPENDS}; do \
1713: lib=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
1.13 imp 1714: dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
1715: if expr "$$dir" : '.*:' > /dev/null; then \
1716: target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
1717: dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
1718: else \
1719: target=${DEPENDS_TARGET}; \
1720: fi; \
1.1 niklas 1721: if /sbin/ldconfig -r | ${GREP} -q -e "-l$$lib"; then \
1722: ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - found"; \
1723: else \
1724: ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - not found"; \
1.13 imp 1725: ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \
1.1 niklas 1726: if [ ! -d "$$dir" ]; then \
1727: ${ECHO_MSG} ">> No directory for $$lib. Skipping.."; \
1728: else \
1.13 imp 1729: (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
1.1 niklas 1730: ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
1731: fi; \
1732: fi; \
1733: done
1.16 niklas 1734: .endif
1.1 niklas 1735: .endif
1736: .else
1737: @${DO_NADA}
1738: .endif
1739:
1740: misc-depends:
1741: .if defined(DEPENDS)
1742: .if !defined(NO_DEPENDS)
1.13 imp 1743: @for dir in ${DEPENDS}; do \
1744: if expr "$$dir" : '.*:' > /dev/null; then \
1745: target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
1746: dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
1747: else \
1748: target=${DEPENDS_TARGET}; \
1749: fi; \
1750: ${ECHO_MSG} "===> ${PKGNAME} depends on: $$dir"; \
1751: ${ECHO_MSG} "===> Verifying $$target for $$dir"; \
1752: if [ ! -d $$dir ]; then \
1753: ${ECHO_MSG} ">> No directory for $$dir. Skipping.."; \
1.1 niklas 1754: else \
1.13 imp 1755: (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
1.1 niklas 1756: fi \
1757: done
1758: @${ECHO_MSG} "===> Returning to build of ${PKGNAME}"
1759: .endif
1760: .else
1761: @${DO_NADA}
1762: .endif
1763:
1764: .endif
1765:
1.9 imp 1766: .if !target(clean-depends)
1767: clean-depends:
1768: .if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) \
1769: || defined(RUN_DEPENDS)
1.13 imp 1770: @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u`; do \
1771: if [ -d $$dir ] ; then \
1772: (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \
1773: fi \
1.9 imp 1774: done
1775: .endif
1776: .if defined(DEPENDS)
1.13 imp 1777: @for dir in `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
1778: if [ -d $$dir ] ; then \
1779: (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \
1780: fi \
1.9 imp 1781: done
1782: .endif
1783: .endif
1784:
1.1 niklas 1785: .if !target(depends-list)
1786: depends-list:
1.13 imp 1787: @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
1.9 imp 1788: (cd $$dir; ${MAKE} package-name depends-list); \
1.1 niklas 1789: done
1790: .endif
1791:
1792: ################################################################
1793: # Everything after here are internal targets and really
1794: # shouldn't be touched by anybody but the release engineers.
1795: ################################################################
1796:
1797: # This target generates an index entry suitable for aggregation into
1798: # a large index. Format is:
1799: #
1800: # distribution-name|port-path|installation-prefix|comment| \
1801: # description-file|maintainer|categories|build deps|run deps
1802: #
1803: .if !target(describe)
1804: describe:
1.13 imp 1805: @${ECHO} -n "${PKGNAME}|${.CURDIR}|"; \
1806: ${ECHO} -n "${PREFIX}|"; \
1807: if [ -f ${COMMENT} ]; then \
1808: ${ECHO} -n "`${CAT} ${COMMENT}`"; \
1.1 niklas 1809: else \
1810: ${ECHO} -n "** No Description"; \
1.13 imp 1811: fi; \
1812: if [ -f ${DESCR} ]; then \
1813: ${ECHO} -n "|${DESCR}"; \
1.1 niklas 1814: else \
1815: ${ECHO} -n "|/dev/null"; \
1.13 imp 1816: fi; \
1817: ${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \
1818: case "A${FETCH_DEPENDS}B${BUILD_DEPENDS}C${LIB_DEPENDS}D${DEPENDS}E" in \
1819: ABCDE) ;; \
1820: *) cd ${.CURDIR} && ${ECHO} -n `make depends-list|sort -u`;; \
1821: esac; \
1822: ${ECHO} -n "|"; \
1823: case "A${RUN_DEPENDS}B${LIB_DEPENDS}C${DEPENDS}D" in \
1824: ABCD) ;; \
1825: *) cd ${.CURDIR} && ${ECHO} -n `make package-depends|sort -u`;; \
1826: esac; \
1827: ${ECHO} ""
1.1 niklas 1828: .endif
1829:
1830: .if !target(readmes)
1831: readmes: readme
1832: .endif
1833:
1834: .if !target(readme)
1835: readme:
1836: @rm -f README.html
1.6 niklas 1837: @cd ${.CURDIR} && make README.html
1.1 niklas 1838: .endif
1839:
1840: README.html:
1841: @${ECHO_MSG} "===> Creating README.html for ${PKGNAME}"
1842: @${CAT} ${TEMPLATES}/README.port | \
1843: ${SED} -e 's&%%PORT%%&'`${ECHO} ${.CURDIR} | ${SED} -e 's.*/\([^/]*/[^/]*\)$$\1'`'&g' \
1844: -e 's&%%PKG%%&${PKGNAME}&g' \
1845: -e '/%%COMMENT%%/r${PKGDIR}/COMMENT' \
1846: -e '/%%COMMENT%%/d' \
1847: -e 's&%%BUILD_DEPENDS%%&'"`${MAKE} print-depends-list`"'&' \
1848: -e 's&%%RUN_DEPENDS%%&'"`${MAKE} print-package-depends`"'&' \
1849: >> $@
1850:
1851: .if !target(print-depends-list)
1852: print-depends-list:
1853: .if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \
1854: defined(LIB_DEPENDS) || defined(DEPENDS)
1855: @${ECHO} -n 'This port requires package(s) "'
1.9 imp 1856: @${ECHO} -n `make depends-list | sort -u`
1.1 niklas 1857: @${ECHO} '" to build.'
1858: .endif
1859: .endif
1860:
1861: .if !target(print-package-depends)
1862: print-package-depends:
1863: .if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS)
1864: @${ECHO} -n 'This port requires package(s) "'
1.9 imp 1865: @${ECHO} -n `make package-depends | sort -u`
1.1 niklas 1866: @${ECHO} '" to run.'
1867: .endif
1868: .endif
1869:
1870: # Fake installation of package so that user can pkg_delete it later.
1871: # Also, make sure that an installed port is recognized correctly in
1872: # accordance to the @pkgdep directive in the packing lists
1873:
1874: .if !target(fake-pkg)
1875: fake-pkg:
1.13 imp 1876: @if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi
1.9 imp 1877: @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
1.1 niklas 1878: .if defined(FORCE_PKG_REGISTER)
1879: @${RM} -rf ${PKG_DBDIR}/${PKGNAME}
1880: .endif
1881: @if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
1882: ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
1.9 imp 1883: ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
1.1 niklas 1884: ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
1.13 imp 1885: ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
1886: ${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
1.1 niklas 1887: if [ -f ${PKGDIR}/INSTALL ]; then \
1888: ${CP} ${PKGDIR}/INSTALL ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
1889: fi; \
1890: if [ -f ${PKGDIR}/DEINSTALL ]; then \
1891: ${CP} ${PKGDIR}/DEINSTALL ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
1892: fi; \
1893: if [ -f ${PKGDIR}/REQ ]; then \
1894: ${CP} ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQ; \
1895: fi; \
1.13 imp 1896: for dep in `make package-depends ECHO_MSG=/usr/bin/true | sort -u`; do \
1897: if [ -d ${PKG_DBDIR}/$$dep ]; then \
1898: if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
1899: >/dev/null 2>&1; then \
1900: ${ECHO} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \
1901: fi; \
1902: fi; \
1903: done; \
1.1 niklas 1904: fi
1905: .endif
1906:
1907: # Depend is generally meaningless for arbitrary ports, but if someone wants
1908: # one they can override this. This is just to catch people who've gotten into
1909: # the habit of typing `make depend all install' as a matter of course.
1910: #
1911: .if !target(depend)
1912: depend:
1913: .endif
1914:
1915: # Same goes for tags
1916: .if !target(tags)
1917: tags:
1.10 niklas 1918: .endif
1919: