Annotation of src/share/mk/bsd.port.mk, Revision 1.79
1.9 imp 1: #-*- mode: Fundamental; tab-width: 4; -*-
2: # ex:ts=4
1.79 ! espie 3: # $OpenBSD: bsd.port.mk,v 1.78 1999/03/14 15:19:05 rohee Exp $
1.1 niklas 4: #
5: # bsd.port.mk - 940820 Jordan K. Hubbard.
6: # This file is in the public domain.
7: #
1.13 imp 8: # FreeBSD Id: bsd.port.mk,v 1.264 1996/12/25 02:27:44 imp Exp
1.44 marc 9: # $NetBSD: bsd.port.mk,v 1.62 1998/04/09 12:47:02 hubertf Exp $
1.6 niklas 10: #
1.1 niklas 11: # Please view me with 4 column tabs!
12:
1.13 imp 13: # There are two different types of "maintainers" in the whole ports
14: # framework concept. Maintainers of the bsd.port*.mk files
1.32 marc 15: # are listed below in the ${OPSYS}_MAINTAINER entries (this file
1.13 imp 16: # is used by multiple *BSD flavors). You should consult them directly
17: # if you have any questions/suggestions regarding this file since only
18: # they are allowed to modify the master copies in the CVS repository!
19:
20: # For each port, the MAINTAINER variable is what you should consult for
21: # contact information on the person(s) to contact if you have questions/
22: # suggestions about that specific port. By default (if no MAINTAINER
1.58 pattonme 23: # is listed), a port is maintained by the subscribers of the ports@openbsd.org
24: # mailing list, and any correspondence should be directed there.
1.9 imp 25: #
1.30 marc 26: OpenBSD_MAINTAINER= marc@OpenBSD.ORG
1.55 espie 27:
28: # NEED_VERSION: we need at least this version of bsd.port.mk for this
29: # port to build
30:
1.79 ! espie 31: FULL_REVISION=$$OpenBSD: bsd.port.mk,v 1.78 1999/03/14 15:19:05 rohee Exp $$
1.55 espie 32: .if defined(NEED_VERSION)
1.67 espie 33: _VERSION_REVISION=${FULL_REVISION:M[0-9]*.*}
1.55 espie 34:
1.67 espie 35: _VERSION=${_VERSION_REVISION:C/\..*//}
36: _REVISION=${_VERSION_REVISION:C/.*\.//}
1.55 espie 37:
1.67 espie 38: _VERSION_NEEDED=${NEED_VERSION:C/\..*//}
39: _REVISION_NEEDED=${NEED_VERSION:C/.*\.//}
1.55 espie 40:
41: .BEGIN:
1.67 espie 42: @if [ ${_VERSION_NEEDED} -gt ${_VERSION} -o \
43: ${_VERSION_NEEDED} -eq ${_VERSION} -a \
44: ${_REVISION_NEEDED} -gt ${_REVISION} ]; \
1.55 espie 45: then \
46: ${ECHO} "Need version ${NEED_VERSION} of bsd.port.mk"; \
47: ${FALSE}; \
48: fi;
49:
50: .endif
1.1 niklas 51:
52: # Supported Variables and their behaviors:
53: #
54: # Variables that typically apply to all ports:
55: #
1.44 marc 56: # ONLY_FOR_ARCHS - If a port only makes sense to certain architectures, this
1.10 niklas 57: # is a list containing the names for them. It is checked
1.44 marc 58: # against the predefined ${MACHINE_ARCH} value
1.58 pattonme 59: # ARCH - The architecture (default: "uname -m").
60: # OPSYS - The operating system (default: "uname -s").
61: # OPSYS_VER - The current version of the operating system
62: # (default: "uname -r").
63: # PORTSDIR - The root of the ports tree. Defaults: /usr/ports
64: # DISTDIR - Where to get gzip'd, tarballed copies of original sources.
1.9 imp 65: # (default: ${PORTSDIR}/distfiles).
1.1 niklas 66: # PREFIX - Where to install things in general (default: /usr/local).
67: # MASTER_SITES - Primary location(s) for distribution files if not found
1.9 imp 68: # locally.
1.44 marc 69: # MASTER_SITE_SUBDIR - Directory that "%SUBDIR%" in MASTER_SITES is
70: # replaced by.
1.1 niklas 71: # PATCH_SITES - Primary location(s) for distribution patch files
1.9 imp 72: # (see PATCHFILES below) if not found locally.
1.44 marc 73: # PATCH_SITE_SUBDIR - Directory that "%SUBDIR%" in PATCH_SITES is
74: # replaced by.
1.1 niklas 75: #
1.9 imp 76: # MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
77: # files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
78: # (default:
1.27 marc 79: # ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/${DIST_SUBDIR}/
1.34 marc 80: # ftp://ftp.openbsd.org/pub/OpenBSD/licensed/${DIST_SUBDIR}/
1.9 imp 81: # ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
1.1 niklas 82: # MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
83: # value.
1.27 marc 84: # MASTER_SITE_OPENBSD - If set, only use ftp.openbsd.org as the
85: # MASTER_SITE_OVERRIDE.
1.1 niklas 86: # PACKAGES - A top level directory where all packages go (rather than
87: # going locally to each port). (default: ${PORTSDIR}/packages).
1.52 espie 88: # GMAKE - Set to path of GNU make if not in $PORTPATH (default: gmake).
89: # XMKMF - Set to path of `xmkmf' if not in $PORTPATH
90: # (default: xmkmf -a ).
1.1 niklas 91: # MAINTAINER - The e-mail address of the contact person for this port
1.58 pattonme 92: # Defaults: ports@OpenBSD.ORG
1.9 imp 93: # CATEGORIES - A list of descriptive categories into which this port falls.
1.14 niklas 94: # WRKOBJDIR - A top level directory where, if defined, the separate working
95: # directories will get created, and symbolically linked to from
96: # ${WRKDIR} (see below). This is useful for building ports on
97: # several architectures, then ${PORTSDIR} can be NFS-mounted
1.62 marc 98: # while ${WRKOBJDIR} is local to every arch
1.75 espie 99: # PREFERRED_CIPHERS
100: # - a list of the form cipher.sig of programs to use to check
101: # recorded checksums, in order of decreasing trust.
102: # (default to using sha1, then rmd160, then md5).
1.1 niklas 103: #
104: # Variables that typically apply to an individual port. Non-Boolean
105: # variables without defaults are *mandatory*.
106: #
107: # WRKDIR - A temporary working directory that gets *clobbered* on clean
108: # (default: ${.CURDIR}/work).
109: # WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
110: # unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
111: # NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
1.60 rohee 112: # WRKBUILD - The directory where the port is actually built, useful for
113: # ports that need a separate directory (default: ${WRKSRC}).
114: # This is intended for GNU configure.
1.71 espie 115: # SEPARATE_BUILD
116: # - define if the port can build in directory separate from
117: # WRKSRC. This redefines WRKBUILD to be arch-dependent,
118: # along with the configure, build and install cookies
1.1 niklas 119: # DISTNAME - Name of port or distribution.
120: # DISTFILES - Name(s) of archive file(s) containing distribution
121: # (default: ${DISTNAME}${EXTRACT_SUFX}).
122: # PATCHFILES - Name(s) of additional files that contain distribution
123: # patches (default: none). make will look for them at
124: # PATCH_SITES (see above). They will automatically be
125: # uncompressed before patching if the names end with
126: # ".gz" or ".Z".
1.9 imp 127: # DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES}
1.1 niklas 128: # and ${PATCHFILES} will be put in this subdirectory of
129: # ${DISTDIR}. Also they will be fetched in this subdirectory
130: # from FreeBSD mirror sites.
1.9 imp 131: # ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
1.58 pattonme 132: # MIRROR_DISTFILE - Whether the distfile is redistributable without restrictions.
133: # Defaults to "yes", set this to "no" if restrictions exist.
1.9 imp 134: # IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set
135: # this variable to their names.
1.1 niklas 136: # PKGNAME - Name of the package file to create if the DISTNAME
137: # isn't really relevant for the port/package
138: # (default: ${DISTNAME}).
139: # EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to
140: # actually extract.
141: # PATCHDIR - A directory containing any additional patches you made
1.50 espie 142: # to port this software to OpenBSD (default:
1.1 niklas 143: # ${.CURDIR}/patches)
1.50 espie 144: # PATCH_LIST - list of patches to apply, can include wildcards (default:
145: # patch-*)
1.1 niklas 146: # SCRIPTDIR - A directory containing any auxiliary scripts
147: # (default: ${.CURDIR}/scripts)
148: # FILESDIR - A directory containing any miscellaneous additional files.
149: # (default: ${.CURDIR}/files)
150: # PKGDIR - A direction containing any package creation files.
151: # (default: ${.CURDIR}/pkg)
152: # PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
153: # FORCE_PKG_REGISTER - If set, it will overwrite any existing package
154: # registration information in ${PKG_DBDIR}/${PKGNAME}.
155: # NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
1.13 imp 156: # the "install" target.
157: # MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist
158: # if USE_IMAKE or USE_X11 is set, /etc/mtree/BSD.local.dist
159: # otherwise.)
1.26 marc 160: # COMES_WITH - The first version that a port was made part of the
161: # standard OpenBSD distribution. If the current OpenBSD
162: # version is >= this version then a notice will be
163: # displayed instead the port being generated.
1.1 niklas 164: #
1.6 niklas 165: # NO_BUILD - Use a dummy (do-nothing) build target.
166: # NO_CONFIGURE - Use a dummy (do-nothing) configure target.
1.9 imp 167: # NO_CDROM - Port may not go on CDROM. Set this string to reason.
1.6 niklas 168: # NO_DESCRIBE - Use a dummy (do-nothing) describe target.
1.1 niklas 169: # NO_EXTRACT - Use a dummy (do-nothing) extract target.
1.6 niklas 170: # NO_INSTALL - Use a dummy (do-nothing) install target.
1.1 niklas 171: # NO_PACKAGE - Use a dummy (do-nothing) package target.
1.6 niklas 172: # NO_PKG_REGISTER - Don't register a port install as a package.
1.1 niklas 173: # NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
174: # NO_WRKDIR - There's no work directory at all; port does this someplace
175: # else.
176: # NO_DEPENDS - Don't verify build of dependencies.
1.44 marc 177: # NOCLEANDEPENDS - Don't nuke dependent dirs on make clean (Default: yes)
1.9 imp 178: # BROKEN - Port is broken. Set this string to the reason why.
1.1 niklas 179: # RESTRICTED - Port is restricted. Set this string to the reason why.
180: # USE_GMAKE - Says that the port uses gmake.
1.52 espie 181: #
182: # XXX: cygnus products do NOT use autoconf for making its main
183: # configure from configure.in
184: # USE_AUTOCONF - Says that the port uses autoconf (implies GNU_CONFIGURE).
185: # AUTOCONF_DIR - Where to apply autoconf (default: ${WRKSRC}).
1.13 imp 186: # USE_PERL5 - Says that the port uses perl5 for building and running.
1.1 niklas 187: # USE_IMAKE - Says that the port uses imake.
1.13 imp 188: # USE_X11 - Says that the port uses X11 (i.e., installs in ${X11BASE}).
1.47 espie 189: # USE_EGCC - Says that the port needs the egcs C compiler
190: # USE_EGXX - Says that the port needs the egcs C++ compiler
1.1 niklas 191: # NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
192: # target.
193: # HAS_CONFIGURE - Says that the port has its own configure script.
194: # GNU_CONFIGURE - Set if you are using GNU configure (optional).
195: # CONFIGURE_SCRIPT - Name of configure script, defaults to 'configure'.
196: # CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set.
1.73 marc 197: # CONFIGURE_SHARED - An argument to GNU configure that expands to
198: # --enable-shared for those architectures that support
199: # shared libraries and --disable-shared for architectures
200: # that do not support shared libraries.
1.13 imp 201: # CONFIGURE_ENV - Pass these env (shell-like) to configure if
1.1 niklas 202: # ${HAS_CONFIGURE} is set.
1.13 imp 203: # SCRIPTS_ENV - Additional environment vars passed to scripts in
204: # ${SCRIPTDIR} executed by bsd.port.mk.
205: # MAKE_ENV - Additional environment vars passed to sub-make in build
206: # stage.
1.1 niklas 207: # IS_INTERACTIVE - Set this if your port needs to interact with the user
208: # during a build. User can then decide to skip this port by
209: # setting ${BATCH}, or compiling only the interactive ports
210: # by setting ${INTERACTIVE}.
1.7 niklas 211: # FETCH_DEPENDS - A list of "path:dir" pairs of other ports this
212: # package depends in the "fetch" stage. "path" is the
213: # name of a file if it starts with a slash (/), an
214: # executable otherwise. make will test for the
215: # existence (if it is a full pathname) or search for
1.52 espie 216: # it in $PORTPATH (if it is an executable) and go
1.7 niklas 217: # into "dir" to do a "make all install" if it's not
218: # found.
219: # BUILD_DEPENDS - A list of "path:dir" pairs of other ports this
220: # package depends to build (between the "extract" and
221: # "build" stages, inclusive). The test done to
222: # determine the existence of the dependency is the
223: # same as FETCH_DEPENDS.
224: # RUN_DEPENDS - A list of "path:dir" pairs of other ports this
225: # package depends to run. The test done to determine
226: # the existence of the dependency is the same as
227: # FETCH_DEPENDS. This will be checked during the
228: # "install" stage and the name of the dependency will
229: # be put into the package as well.
1.1 niklas 230: # LIB_DEPENDS - A list of "lib:dir" pairs of other ports this package
231: # depends on. "lib" is the name of a shared library.
232: # make will use "ldconfig -r" to search for the
1.44 marc 233: # library. Note that lib can be any regular expression.
234: # In older versions of this file, you need two backslashes
235: # in front of dots (.) to supress its special meaning (e.g.,
236: # use "foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*").
237: # No special backslashes are needed to escape regular
238: # expression metacharacters in OpenBSD, and the old backslash
239: # escapes are recognised for backwards compatibility.
1.1 niklas 240: # DEPENDS - A list of other ports this package depends on being
241: # made first. Use this for things that don't fall into
242: # the above two categories.
243: # EXTRACT_CMD - Command for extracting archive (default: tar).
244: # EXTRACT_SUFX - Suffix for archive names (default: .tar.gz).
245: # EXTRACT_BEFORE_ARGS -
246: # Arguments to ${EXTRACT_CMD} before filename
1.13 imp 247: # (default: -xzf).
1.1 niklas 248: # EXTRACT_AFTER_ARGS -
249: # Arguments to ${EXTRACT_CMD} following filename
250: # (default: none).
251: #
1.52 espie 252: # FETCH_CMD - Full path to ftp/http fetch command if not in $PORTPATH
1.44 marc 253: # (default: /usr/bin/ftp).
1.6 niklas 254: # FETCH_BEFORE_ARGS -
255: # Arguments to ${FETCH_CMD} before filename (default: none).
256: # FETCH_AFTER_ARGS -
257: # Arguments to ${FETCH_CMD} following filename (default: none).
1.44 marc 258: # NO_IGNORE - Set this to YES (most probably in a "make fetch" in
259: # ${PORTSDIR}) if you want to fetch all distfiles,
260: # even for packages not built due to limitation by
261: # absent X or Motif or ONLY_FOR_ARCHS...
1.54 marc 262: # NO_WARNINGS - Set this to YES to disable warnings regarding variables
263: # to define to control the build. Automatically set
264: # from the "mirror-distfiles" target.
1.44 marc 265: # ALL_TARGET - The target to pass to make in the package when building.
266: # (default: "all")
267: # INSTALL_TARGET- The target to pass to make in the package when installing.
268: # (default: "install")
1.1 niklas 269: #
270: # Motif support:
271: #
1.56 form 272: # USE_MOTIF - Set this in your port if it requires Motif or Lesstif.
273: # It will be built using Lesstif port unless Motif libraries
274: # found or HAVE_MOTIF is defined. See also REQUIRES_MOTIF.
1.49 form 275: #
1.56 form 276: # REQUIRES_MOTIF- Set this in your port if it requires Motif. It will be
1.1 niklas 277: # built only if HAVE_MOTIF is set.
1.58 pattonme 278: # HAVE_MOTIF - If set, means system has Motif. Typically set in /etc/mk.conf.
1.1 niklas 279: # MOTIF_STATIC - If set, link libXm statically; otherwise, link it
1.58 pattonme 280: # dynamically. Typically set in /etc/mk.conf.
1.6 niklas 281: # MOTIFLIB - Set automatically to appropriate value depending on
282: # ${MOTIF_STATIC}. Substitute references to -lXm with
283: # patches to make your port conform to our standards.
1.13 imp 284: # MOTIF_ONLY - If set, build Motif ports only. (Not much use except for
285: # building packages.)
1.1 niklas 286: #
287: # Variables to change if you want a special behavior:
288: #
289: # ECHO_MSG - Used to print all the '===>' style prompts - override this
290: # to turn them off (default: /bin/echo).
1.13 imp 291: # DEPENDS_TARGET - The target to execute when a port is calling a
292: # dependency (default: "install").
1.6 niklas 293: # PATCH_DEBUG - If set, print out more information about the patches as
294: # it attempts to apply them.
295: #
1.9 imp 296: # Variables that serve as convenient "aliases" for your *-install targets.
297: # Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
1.6 niklas 298: #
1.44 marc 299: # INSTALL_PROGRAM - A command to install binary executables.
300: # INSTALL_SCRIPT - A command to install executable scripts.
301: # INSTALL_DATA - A command to install sharable data.
302: # INSTALL_MAN - A command to install manpages (doesn't compress).
303: # INSTALL_PROGRAM_DIR - Create a directory for storing programs
304: # INSTALL_SCRIPT_DIR - Create a directory for storing scripts (alias for
305: # (INSTALL_PROGRAM_DIR)
306: # INSTALL_DATA_DIR - Create a directory for storing arbitrary data
307: # INSTALL_MAN_DIR - Create a directory for storing man pages
308: #
309: # It is assumed that the port installs manpages uncompressed. If this is
310: # not the case, set MANCOMPRESSED in the port and define MAN<sect> and
311: # CAT<sect> for the compressed pages. The pages will then be automagically
312: # uncompressed.
1.9 imp 313: #
1.44 marc 314: # MANCOMPRESSED - Indicates that the port installs manpages in a compressed
315: # form (default: port installs manpages uncompressed).
1.9 imp 316: # MAN<sect> - A list of manpages, categorized by section. For
317: # example, if your port has "man/man1/foo.1" and
318: # "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
319: # The available sections chars are "123456789LN".
1.44 marc 320: # CAT<sect> - The same as MAN<sect>, only for formatted manpages.
321: # MANPREFIX -The directory prefix for ${MAN<sect>} (default: ${PREFIX}).
322: # CATPREFIX - The directory prefix for ${CAT<sect>} (default: ${PREFIX}).
1.9 imp 323: #
1.73 marc 324: # Other variables:
325: #
326: # NO_SHARED_LIBS - defined as "yes" for those machine architectures that do
327: # not support shared libraries. WARNING: This value is
328: # NOT defined until AFTER ".include bsd.port.mk". Thus
329: # you can NOT use something like ".if defined(NO_SHARED_LIBS)"
330: # before this file is included.
331: #
1.1 niklas 332: # Default targets and their behaviors:
333: #
334: # fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined)
335: # into ${DISTDIR} as necessary.
336: # fetch-list - Show list of files that would be retrieved by fetch
337: # extract - Unpacks ${DISTFILES} into ${WRKDIR}.
338: # patch - Apply any provided patches to the source.
339: # configure - Runs either GNU configure, one or more local configure
340: # scripts or nothing, depending on what's available.
341: # build - Actually compile the sources.
342: # install - Install the results of a build.
343: # reinstall - Install the results of a build, ignoring "already installed"
344: # flag.
1.44 marc 345: # deinstall - Remove the installation. Alias: uninstall
1.32 marc 346: # plist - create a file suitable for use as a packing list. This
347: # is for port maintainers.
1.1 niklas 348: # package - Create a package from an _installed_ port.
349: # describe - Try to generate a one-line description for each port for
350: # use in INDEX files and the like.
351: # checkpatch - Do a "patch -C" instead of a "patch". Note that it may
352: # give incorrect results if multiple patches deal with
1.52 espie 353: # the same file.
1.75 espie 354: # checksum - Use ${CHECKSUM_FILE} to ensure that your distfiles are valid.
355: # makesum - Generate ${CHECKSUM_FILE} (only do this for your own ports!).
356: # addsum - update ${CHECKSUM_FILE} in a non-destructive way
357: # (your own ports only!)
1.44 marc 358: # readme - Create a README.html file describing the category or package
359: # mirror-distfiles - Mirror the distfile(s) if they are freely redistributable
360: # Setting MIRROR_DISTFILE to "no" in the package Makefile
361: # will override the default "yes", and the distfile will
362: # not be fetched.
1.1 niklas 363: #
364: # Default sequence for "all" is: fetch checksum extract patch configure build
365: #
366: # Please read the comments in the targets section below, you
367: # should be able to use the pre-* or post-* targets/scripts
368: # (which are available for every stage except checksum) or
369: # override the do-* targets to do pretty much anything you want.
370: #
371: # NEVER override the "regular" targets unless you want to open
372: # a major can of worms.
373:
1.44 marc 374: # Get the architecture
375: ARCH!= uname -m
376:
1.32 marc 377: # Get the operating system type and version
1.27 marc 378: OPSYS!= uname -s
1.32 marc 379: OPSYS_VER!= uname -r
1.27 marc 380:
1.1 niklas 381: .if exists(${.CURDIR}/../Makefile.inc)
382: .include "${.CURDIR}/../Makefile.inc"
383: .endif
384:
1.62 marc 385: # Define SUPPORT_SHARES for those machines that support shared libraries.
386: #
387: .if (${MACHINE_ARCH} == "alpha") || (${MACHINE_ARCH} == "powerpc") || \
388: (${MACHINE_ARCH} == "vax") || (${MACHINE_ARCH} == "hppa")
389: NO_SHARED_LIBS= yes
390: .endif
391:
1.44 marc 392: NOCLEANDEPENDS= yes
1.10 niklas 393: NOMANCOMPRESS?= yes
1.14 niklas 394: DEF_UMASK?= 022
1.6 niklas 395:
1.13 imp 396: .if exists(${.CURDIR}/Makefile.${ARCH}-${OPSYS})
397: .include "${.CURDIR}/Makefile.${ARCH}-${OPSYS}"
398: .elif exists(${.CURDIR}/Makefile.${OPSYS})
399: .include "${.CURDIR}/Makefile.${OPSYS}"
400: .elif exists(${.CURDIR}/Makefile.${ARCH})
401: .include "${.CURDIR}/Makefile.${ARCH}"
402: .endif
403:
1.1 niklas 404: # These need to be absolute since we don't know how deep in the ports
405: # tree we are and thus can't go relative. They can, of course, be overridden
1.9 imp 406: # by individual Makefiles or local system make configuration.
1.13 imp 407: PORTSDIR?= /usr/ports
1.44 marc 408: LOCALBASE?= ${DESTDIR}/usr/local
1.13 imp 409: X11BASE?= ${DESTDIR}/usr/X11R6
1.9 imp 410: DISTDIR?= ${PORTSDIR}/distfiles
411: _DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
1.1 niklas 412: PACKAGES?= ${PORTSDIR}/packages
413: TEMPLATES?= ${PORTSDIR}/templates
1.14 niklas 414:
1.13 imp 415: .if exists(${.CURDIR}/patches.${ARCH}-${OPSYS})
416: PATCHDIR?= ${.CURDIR}/patches.${ARCH}-${OPSYS}
417: .elif exists(${.CURDIR}/patches.${OPSYS})
418: PATCHDIR?= ${.CURDIR}/patches.${OPSYS}
419: .elif exists(${.CURDIR}/patches.${ARCH})
420: PATCHDIR?= ${.CURDIR}/patches.${ARCH}
421: .else
1.1 niklas 422: PATCHDIR?= ${.CURDIR}/patches
1.13 imp 423: .endif
424:
1.50 espie 425: PATCH_LIST?= patch-*
426:
1.13 imp 427: .if exists(${.CURDIR}/scripts.${ARCH}-${OPSYS})
428: SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH}-${OPSYS}
429: .elif exists(${.CURDIR}/scripts.${OPSYS})
430: SCRIPTDIR?= ${.CURDIR}/scripts.${OPSYS}
431: .elif exists(${.CURDIR}/scripts.${ARCH})
432: SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH}
433: .else
1.1 niklas 434: SCRIPTDIR?= ${.CURDIR}/scripts
1.13 imp 435: .endif
436:
437: .if exists(${.CURDIR}/files.${ARCH}-${OPSYS})
438: FILESDIR?= ${.CURDIR}/files.${ARCH}-${OPSYS}
439: .elif exists(${.CURDIR}/files.${OPSYS})
440: FILESDIR?= ${.CURDIR}/files.${OPSYS}
441: .elif exists(${.CURDIR}/files.${ARCH})
442: FILESDIR?= ${.CURDIR}/files.${ARCH}
443: .else
1.1 niklas 444: FILESDIR?= ${.CURDIR}/files
1.13 imp 445: .endif
446:
447: .if exists(${.CURDIR}/pkg.${ARCH}-${OPSYS})
448: PKGDIR?= ${.CURDIR}/pkg.${ARCH}-${OPSYS}
449: .elif exists(${.CURDIR}/pkg.${OPSYS})
450: PKGDIR?= ${.CURDIR}/pkg.${OPSYS}
451: .elif exists(${.CURDIR}/pkg.${ARCH})
452: PKGDIR?= ${.CURDIR}/pkg.${ARCH}
453: .else
1.1 niklas 454: PKGDIR?= ${.CURDIR}/pkg
1.13 imp 455: .endif
456:
1.1 niklas 457: .if defined(USE_IMAKE) || defined(USE_X11)
458: PREFIX?= ${X11BASE}
459: .else
460: PREFIX?= ${LOCALBASE}
461: .endif
1.79 ! espie 462:
! 463: # where configuration files should go
! 464: SYSCONFDIR?= /etc
1.1 niklas 465: # The following 4 lines should go away as soon as the ports are all updated
466: .if defined(EXEC_DEPENDS)
467: BUILD_DEPENDS+= ${EXEC_DEPENDS}
468: RUN_DEPENDS+= ${EXEC_DEPENDS}
469: .endif
470: .if defined(USE_GMAKE)
1.44 marc 471: BUILD_DEPENDS+= ${GMAKE}:${PORTSDIR}/devel/gmake
472: MAKE_PROGRAM= ${GMAKE}
473: .else
474: MAKE_PROGRAM= ${MAKE}
1.13 imp 475: .endif
1.52 espie 476: .if defined(USE_AUTOCONF)
477: GNU_CONFIGURE= yes
478: BUILD_DEPENDS+= ${AUTOCONF}:${PORTSDIR}/devel/autoconf
479: AUTOCONF_DIR?=${WRKSRC}
480: # missing ?= not an oversight
481: AUTOCONF_ENV=PATH=${PORTPATH}
482: .endif
1.47 espie 483: .if defined(USE_EGCC)
484: BUILD_DEPENDS+= ${EGCC}:${PORTSDIR}/devel/egcs-stable
485: CC=${EGCC}
486: .endif
487: .if defined(USE_EGXX)
488: BUILD_DEPENDS+= ${EGXX}:${PORTSDIR}/devel/egcs-stable
489: CXX=${EGXX}
490: .endif
1.49 form 491: .if defined(USE_MOTIF) && !defined(HAVE_MOTIF) && !defined(REQUIRES_MOTIF)
492: LIB_DEPENDS+= Xm.:${PORTSDIR}/x11/lesstif
493: .endif
1.44 marc 494:
1.1 niklas 495: .if exists(${PORTSDIR}/../Makefile.inc)
496: .include "${PORTSDIR}/../Makefile.inc"
497: .endif
498:
499: EXTRACT_COOKIE?= ${WRKDIR}/.extract_done
1.71 espie 500: PATCH_COOKIE?= ${WRKDIR}/.patch_done
501: .if defined(SEPARATE_BUILD)
502: CONFIGURE_COOKIE?= ${WRKBUILD}/.configure_done
503: INSTALL_PRE_COOKIE?=${WRKBUILD}/.install_started
504: INSTALL_COOKIE?= ${WRKBUILD}/.install_done
505: BUILD_COOKIE?= ${WRKBUILD}/.build_done
506: PACKAGE_COOKIE?= ${WRKBUILD}/.package_done
507: .else
1.1 niklas 508: CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done
1.32 marc 509: INSTALL_PRE_COOKIE?=${WRKDIR}/.install_started
1.1 niklas 510: INSTALL_COOKIE?= ${WRKDIR}/.install_done
511: BUILD_COOKIE?= ${WRKDIR}/.build_done
512: PACKAGE_COOKIE?= ${WRKDIR}/.package_done
1.71 espie 513: .endif
1.1 niklas 514:
515: # Miscellaneous overridable commands:
516: GMAKE?= gmake
1.52 espie 517: AUTOCONF?= autoconf
1.47 espie 518: EGCC?= egcc
519: EGXX?= eg++
1.1 niklas 520: XMKMF?= xmkmf -a
1.52 espie 521:
1.75 espie 522: # be paranoid about which ciphers we trust
1.13 imp 523: .if exists(/sbin/md5)
524: MD5?= /sbin/md5
1.9 imp 525: .elif exists(/bin/md5)
1.4 deraadt 526: MD5?= /bin/md5
1.13 imp 527: .elif exists(/usr/bin/md5)
528: MD5?= /usr/bin/md5
1.9 imp 529: .else
1.13 imp 530: MD5?= md5
1.9 imp 531: .endif
1.75 espie 532:
533: .if exists(/sbin/sha1)
534: SHA1?= /sbin/sha1
535: .elif exists(/bin/sha1)
536: SHA1?= /bin/sha1
537: .elif exists(/usr/bin/sha1)
538: SHA1?= /usr/bin/sha1
539: .else
540: SHA1?= sha1
541: .endif
542:
543: .if exists(/sbin/rmd160)
544: RMD160?= /sbin/rmd160
545: .elif exists(/bin/rmd160)
546: RMD160?= /bin/rmd160
547: .elif exists(/usr/bin/rmd160)
548: RMD160?= /usr/bin/rmd160
549: .else
550: RMD160?= rmd160
551: .endif
552:
553: # Compatibility game
1.1 niklas 554: MD5_FILE?= ${FILESDIR}/md5
1.75 espie 555: CHECKSUM_FILE?= ${MD5_FILE}
556:
557: # Don't touch !!! Used for generating checksums.
558: CIPHERS= ${SHA1}.SHA1 ${RMD160}.RMD160 ${MD5}.MD5
559:
560: # This is the one you can override
561: PREFERRED_CIPHERS?= ${CIPHERS}
1.1 niklas 562:
1.52 espie 563: PORTPATH?= /usr/bin:/bin:/usr/sbin:/sbin:${LOCALBASE}/bin:${X11BASE}/bin
1.77 marc 564:
565: # Add any COPTS to CFLAGS. Note: programs that use imake do not
566: # use CFLAGS! Also, many (most?) ports hard code CFLAGS, ignoring
567: # what we pass in.
568: CFLAGS+= ${COPTS}
1.52 espie 569:
1.1 niklas 570: MAKE_FLAGS?= -f
571: MAKEFILE?= Makefile
1.52 espie 572: MAKE_ENV+= PATH=${PORTPATH} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}"
1.1 niklas 573:
1.13 imp 574: .if exists(/usr/bin/fetch)
575: FETCH_CMD?= /usr/bin/fetch
576: .else
1.6 niklas 577: FETCH_CMD?= /usr/bin/ftp
1.9 imp 578: .endif
1.1 niklas 579:
1.44 marc 580: # By default, distfiles have no restrictions placed on them
581: MIRROR_DISTFILE?= yes
582:
1.1 niklas 583: TOUCH?= /usr/bin/touch
584: TOUCH_FLAGS?= -f
585:
586: PATCH?= /usr/bin/patch
587: PATCH_STRIP?= -p0
588: PATCH_DIST_STRIP?= -p0
589: .if defined(PATCH_DEBUG)
1.6 niklas 590: PATCH_DEBUG_TMP= yes
1.1 niklas 591: PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP}
592: PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP}
593: .else
1.6 niklas 594: PATCH_DEBUG_TMP= no
1.3 niklas 595: PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
596: PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
1.1 niklas 597: .endif
598: .if defined(BATCH)
599: PATCH_ARGS+= --batch
600: PATCH_DIST_ARGS+= --batch
601: .endif
602:
603: .if defined(PATCH_CHECK_ONLY)
604: PATCH_ARGS+= -C
605: PATCH_DIST_ARGS+= -C
606: .endif
607:
1.9 imp 608: .if exists(/bin/tar)
1.5 tholo 609: EXTRACT_CMD?= /bin/tar
1.9 imp 610: .else
611: EXTRACT_CMD?= /usr/bin/tar
612: .endif
1.1 niklas 613: # Backwards compatability.
614: .if defined(EXTRACT_ARGS)
615: EXTRACT_BEFORE_ARGS?= ${EXTRACT_ARGS}
616: .else
617: EXTRACT_BEFORE_ARGS?= -xzf
618: .endif
1.44 marc 619: EXTRACT_SUFX?= .tar.gz
1.1 niklas 620:
621: # Figure out where the local mtree file is
1.13 imp 622: .if !defined(MTREE_FILE)
623: .if defined(USE_IMAKE) || defined(USE_X11)
624: MTREE_FILE= /etc/mtree/BSD.x11.dist
625: .else
626: MTREE_FILE= /etc/mtree/BSD.local.dist
627: .endif
1.1 niklas 628: .endif
629: MTREE_CMD?= /usr/sbin/mtree
1.43 marc 630: MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -q -p
1.1 niklas 631:
1.10 niklas 632: .include <bsd.own.mk>
633: MAKE_ENV+= EXTRA_SYS_MK_INCLUDES="<bsd.own.mk>"
1.44 marc 634:
635: .if !defined(NO_WRKDIR)
636: .if defined(OBJMACHINE)
637: WRKDIR?= ${.CURDIR}/work.${MACHINE_ARCH}
638: .else
639: WRKDIR?= ${.CURDIR}/work
640: .endif
641: .else
642: WRKDIR?= ${.CURDIR}
643: .endif
644: .if defined(NO_WRKSUBDIR)
645: WRKSRC?= ${WRKDIR}
646: .else
647: WRKSRC?= ${WRKDIR}/${DISTNAME}
648: .endif
649:
1.71 espie 650: .if defined(SEPARATE_BUILD)
651: WRKBUILD?= ${WRKDIR}/build-${ARCH}
652: .else
1.60 rohee 653: WRKBUILD?= ${WRKSRC}
1.71 espie 654: .endif
1.60 rohee 655:
1.44 marc 656: .if defined(WRKOBJDIR)
657: __canonical_PORTSDIR!= cd ${PORTSDIR}; pwd -P
658: __canonical_CURDIR!= cd ${.CURDIR}; pwd -P
659: PORTSUBDIR= ${__canonical_CURDIR:S,${__canonical_PORTSDIR}/,,}
1.10 niklas 660: .endif
661:
1.6 niklas 662: # A few aliases for *-install targets
663: INSTALL_PROGRAM= \
1.12 millert 664: ${INSTALL} ${INSTALL_COPY} ${INSTALL_STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
1.6 niklas 665: INSTALL_SCRIPT= \
1.12 millert 666: ${INSTALL} ${INSTALL_COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
1.6 niklas 667: INSTALL_DATA= \
1.12 millert 668: ${INSTALL} ${INSTALL_COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
1.6 niklas 669: INSTALL_MAN= \
1.12 millert 670: ${INSTALL} ${INSTALL_COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}
1.44 marc 671: INSTALL_PROGRAM_DIR= \
672: ${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
673: INSTALL_SCRIPT_DIR= \
674: ${INSTALL_PROGRAM_DIR}
675: INSTALL_DATA_DIR= \
676: ${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} -m ${BINMODE}
677: INSTALL_MAN_DIR= \
678: ${INSTALL} -d -o ${MANOWN} -g ${MANGRP} -m ${BINMODE}
1.6 niklas 679:
1.13 imp 680: INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
681: BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
682: BSD_INSTALL_DATA="${INSTALL_DATA}" \
1.44 marc 683: BSD_INSTALL_MAN="${INSTALL_MAN}" \
684: BSD_INSTALL_PROGRAM_DIR="${INSTALL_PROGRAM_DIR}" \
685: BSD_INSTALL_SCRIPT_DIR="${INSTALL_SCRIPT_DIR}" \
686: BSD_INSTALL_DATA_DIR="${INSTALL_DATA_DIR}" \
687: BSD_INSTALL_MAN_DIR="${INSTALL_MAN_DIR}"
1.13 imp 688: MAKE_ENV+= ${INSTALL_MACROS}
689: SCRIPTS_ENV+= ${INSTALL_MACROS}
690:
1.1 niklas 691: # The user can override the NO_PACKAGE by specifying this from
692: # the make command line
693: .if defined(FORCE_PACKAGE)
694: .undef NO_PACKAGE
695: .endif
696:
1.31 marc 697: # Support architecture dependent packing lists
698: #
1.13 imp 699: COMMENT?= ${PKGDIR}/COMMENT
700: DESCR?= ${PKGDIR}/DESCR
1.31 marc 701: .if exists(${PKGDIR}/PLIST.${ARCH})
702: PLIST?= ${PKGDIR}/PLIST.${ARCH}
1.62 marc 703: .else
704: .if defined(NO_SHARED_LIBS) && exists(${PKGDIR}/PLIST.noshared)
705: PLIST?= ${PKGDIR}/PLIST.noshared
1.31 marc 706: .else
1.13 imp 707: PLIST?= ${PKGDIR}/PLIST
1.63 marc 708: .endif
1.31 marc 709: .endif
1.13 imp 710:
1.1 niklas 711: PKG_CMD?= /usr/sbin/pkg_create
1.52 espie 712: PKG_DELETE?= /usr/sbin/pkg_delete
1.1 niklas 713: .if !defined(PKG_ARGS)
1.13 imp 714: PKG_ARGS= -v -c ${COMMENT} -d ${DESCR} -f ${PLIST} -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`"
1.1 niklas 715: .if exists(${PKGDIR}/INSTALL)
716: PKG_ARGS+= -i ${PKGDIR}/INSTALL
717: .endif
718: .if exists(${PKGDIR}/DEINSTALL)
719: PKG_ARGS+= -k ${PKGDIR}/DEINSTALL
720: .endif
721: .if exists(${PKGDIR}/REQ)
722: PKG_ARGS+= -r ${PKGDIR}/REQ
723: .endif
1.9 imp 724: .if exists(${PKGDIR}/MESSAGE)
725: PKG_ARGS+= -D ${PKGDIR}/MESSAGE
726: .endif
1.13 imp 727: .if !defined(NO_MTREE)
728: PKG_ARGS+= -m ${MTREE_FILE}
1.1 niklas 729: .endif
730: .endif
731: PKG_SUFX?= .tgz
732: # where pkg_add records its dirty deeds.
733: PKG_DBDIR?= /var/db/pkg
734:
735: # shared/dynamic motif libs
1.49 form 736: .if defined(USE_MOTIF) || defined(HAVE_MOTIF)
1.1 niklas 737: .if defined(MOTIF_STATIC)
738: MOTIFLIB?= ${X11BASE}/lib/libXm.a
739: .else
740: MOTIFLIB?= -L${X11BASE}/lib -lXm
741: .endif
742: .endif
743:
1.13 imp 744: AWK?= /usr/bin/awk
745: BASENAME?= /usr/bin/basename
1.9 imp 746: CAT?= /bin/cat
1.1 niklas 747: CP?= /bin/cp
1.32 marc 748: DIRNAME?= /usr/bin/dirname
1.13 imp 749: ECHO?= /bin/echo
1.52 espie 750: EXPR?= /bin/expr
1.9 imp 751: FALSE?= /usr/bin/false
1.44 marc 752: FILE?= /usr/bin/file
1.9 imp 753: GREP?= /usr/bin/grep
1.13 imp 754: GUNZIP_CMD?= /usr/bin/gunzip -f
1.1 niklas 755: GZCAT?= /usr/bin/gzcat
1.9 imp 756: GZIP?= -9
757: GZIP_CMD?= /usr/bin/gzip -nf ${GZIP}
1.22 niklas 758: LDCONFIG?= [ ! -x /sbin/ldconfig ] || /sbin/ldconfig
1.14 niklas 759: LN?= /bin/ln
1.50 espie 760: M4?= /usr/bin/m4
1.13 imp 761: MKDIR?= /bin/mkdir -p
762: MV?= /bin/mv
1.18 niklas 763: READLINK?= /usr/bin/readlink
1.13 imp 764: RM?= /bin/rm
765: RMDIR?= /bin/rmdir
1.1 niklas 766: SED?= /usr/bin/sed
1.52 espie 767:
768: # XXX ${SETENV} is needed in front of var=value lists whenever the next
769: # command is expanded from a variable, as this could be a shell construct
1.44 marc 770: SETENV?= /usr/bin/env
1.13 imp 771: SH?= /bin/sh
772: TR?= /usr/bin/tr
1.44 marc 773: TRUE?= /usr/bin/true
1.1 niklas 774:
775: # Used to print all the '===>' style prompts - override this to turn them off.
776: ECHO_MSG?= ${ECHO}
777:
1.44 marc 778: # How to do nothing. Override if you, for some strange reason, would rather
779: # do something.
780: DO_NADA?= ${TRUE}
781:
1.1 niklas 782: ALL_TARGET?= all
783: INSTALL_TARGET?= install
784:
1.44 marc 785: .if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
786: INSTALL_TARGET+= install.man
787: .endif
788:
1.9 imp 789: # Popular master sites
1.13 imp 790: MASTER_SITE_XCONTRIB+= \
791: ftp://crl.dec.com/pub/X11/contrib/%SUBDIR%/ \
1.60 rohee 792: ftp://ftp.eu.net/X11/contrib/%SUBDIR%/ \
1.44 marc 793: ftp://ftp.uni-paderborn.de/pub/X11/contrib/%SUBDIR%/ \
794: ftp://ftp.x.org/contrib/%SUBDIR%/
1.13 imp 795:
796: MASTER_SITE_GNU+= \
797: ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ \
798: ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/
799:
800: MASTER_SITE_PERL_CPAN+= \
801: ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ \
802: ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/%SUBDIR%/
803:
1.78 rohee 804: MASTER_SITE_TEX_CTAN+= \
805: ftp://ftp.cdrom.com/pub/tex/ctan/%SUBDIR%/ \
806: ftp://wuarchive.wustl.edu/packages/TeX/%SUBDIR%/ \
807: ftp://ftp.funet.fi/pub/TeX/CTAN/%SUBDIR%/ \
808: ftp://ftp.tex.ac.uk/public/ctan/tex-archive/%SUBDIR%/ \
809: ftp://ftp.dante.de/tex-archive/%SUBDIR%/
1.13 imp 810:
811: MASTER_SITE_SUNSITE+= \
1.70 rohee 812: ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ \
1.13 imp 813: ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/%SUBDIR%/ \
1.70 rohee 814: ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/%SUBDIR%/ \
815: ftp://ftp.lip6.fr/pub/linux/sunsite/%SUBDIR%
1.78 rohee 816:
817: MASTER_SITE_KDE+= \
818: ftp://ftp.us.kde.org/pub/kde/%SUBDIR%/ \
819: ftp://ftp.kde.org/pub/kde/%SUBDIR%/ \
820: ftp://ftp.tuniv.szczecin.pl/pub/kde/%SUBDIR%/ \
821: ftp://ftp.fu-berlin.de/pub/unix/X11/gui/kde/%SUBDIR%/ \
822: ftp://ftp.dataplus.se/pub/linux/kde/%SUBDIR%/
823:
824: MASTER_SITE_GNOME+= \
825: ftp://ftp.jimpick.com/pub/mirrors/gnome/%SUBDIR%/ \
826: ftp://ftp.geo.net/pub/gnome/%SUBDIR%/ \
827: ftp://gnomeftp.wgn.net/pub/gnome/%SUBDIR%/ \
828: ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/
1.13 imp 829:
830: # Empty declaration to avoid "variable MASTER_SITES recursive" error
831: MASTER_SITES?=
832: PATCH_SITES?=
833:
834: # Substitute subdirectory names
1.57 espie 835: _MASTER_SITES:= ${MASTER_SITES:S/%SUBDIR%/${MASTER_SITE_SUBDIR}/}
1.13 imp 836: PATCH_SITES:= ${PATCH_SITES:S/%SUBDIR%/${PATCH_SITE_SUBDIR}/}
1.57 espie 837: MASTER_SITES:= ${_MASTER_SITES}
1.9 imp 838:
1.27 marc 839: # Two backup master sites, First one at ftp.openbsd.org
840: #
841: _MASTER_SITE_OPENBSD?= \
1.34 marc 842: ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/${DIST_SUBDIR}/ \
843: ftp://ftp.openbsd.org/pub/OpenBSD/licensed/${DIST_SUBDIR}/
1.27 marc 844:
845: # set the backup master sites.
846: #
1.9 imp 847: MASTER_SITE_BACKUP?= \
1.58 pattonme 848: ${_MASTER_SITE_OPENBSD} \
849: ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/
1.27 marc 850:
851: # If the user has this set, go to the OpenBSD repository for everything.
852: #
853: .if defined(MASTER_SITE_OPENBSD)
854: MASTER_SITE_OVERRIDE= ${_MASTER_SITE_OPENBSD}
855: .endif
1.9 imp 856:
1.13 imp 857: # Where to put distfiles that don't have any other master site
1.27 marc 858: # ;;; This is referenced in a few Makefiles -- I'd like to get rid of it
859: #
1.13 imp 860: MASTER_SITE_LOCAL?= \
1.44 marc 861: ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ \
1.13 imp 862: ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/LOCAL_PORTS/
863:
1.1 niklas 864: # I guess we're in the master distribution business! :) As we gain mirror
865: # sites for distfiles, add them to this list.
866: .if !defined(MASTER_SITE_OVERRIDE)
1.9 imp 867: MASTER_SITES+= ${MASTER_SITE_BACKUP}
868: PATCH_SITES+= ${MASTER_SITE_BACKUP}
1.1 niklas 869: .else
870: MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${MASTER_SITES}
871: PATCH_SITES:= ${MASTER_SITE_OVERRIDE} ${PATCH_SITES}
872: .endif
873:
1.28 marc 874: # OpenBSD code to handle ports distfiles on a CDROM. The distfiles
875: # are located in /cdrom/distfiles/${DIST_SUBDIR}/ (assuming that the
876: # CDROM is mounted on /cdrom).
877: #
878: .if exists(/cdrom/distfiles)
879: CDROM_SITE:= /cdrom/distfiles/${DIST_SUBDIR}
880: .if defined(FETCH_SYMLINK_DISTFILES)
881: CDROM_COPY:= ${LN}
882: CDROM_OPT= -s
883: .else
884: CDROM_COPY:= ${CP}
885: CDROM_OPT= -f
886: .endif
887: .endif
888:
1.1 niklas 889: # Derived names so that they're easily overridable.
890: DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
891: PKGNAME?= ${DISTNAME}
892:
1.9 imp 893: ALLFILES?= ${DISTFILES} ${PATCHFILES}
894:
895: .if defined(IGNOREFILES)
896: CKSUMFILES!= \
897: for file in ${ALLFILES}; do \
898: ignore=0; \
899: for tmp in ${IGNOREFILES}; do \
900: if [ "$$file" = "$$tmp" ]; then \
901: ignore=1; \
902: fi; \
903: done; \
904: if [ "$$ignore" = 0 ]; then \
905: echo "$$file"; \
1.44 marc 906: else \
907: echo ""; \
1.9 imp 908: fi; \
909: done
910: .else
911: CKSUMFILES= ${ALLFILES}
912: .endif
913:
914: # List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
915: .if defined(DIST_SUBDIR)
916: _CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
917: _IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
918: .else
919: _CKSUMFILES?= ${CKSUMFILES}
920: _IGNOREFILES?= ${IGNOREFILES}
921: .endif
922:
1.1 niklas 923: # This is what is actually going to be extracted, and is overridable
924: # by user.
925: EXTRACT_ONLY?= ${DISTFILES}
926:
927: # Documentation
1.44 marc 928: MAINTAINER?= ports@OpenBSD.ORG
1.9 imp 929:
930: .if !defined(CATEGORIES)
931: .BEGIN:
932: @${ECHO_MSG} "CATEGORIES is mandatory."
933: @${FALSE}
934: .endif
1.1 niklas 935:
936: # Note this has to start with a capital letter (or more accurately, it
937: # shouldn't match "[a-z]*"), see the target "delete-package-links" below.
938: PKGREPOSITORYSUBDIR?= All
939: PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
940: .if exists(${PACKAGES})
941: PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
942: .else
943: PKGFILE?= ${PKGNAME}${PKG_SUFX}
944: .endif
945:
1.74 marc 946: CONFIGURE_SCRIPT?= configure
947: .if defined(SEPARATE_BUILD)
948: _CONFIGURE_SCRIPT=${WRKSRC}/${CONFIGURE_SCRIPT}
949: .else
950: _CONFIGURE_SCRIPT=./${CONFIGURE_SCRIPT}
951: .endif
952: CONFIGURE_ENV+= PATH=${PORTPATH}
1.1 niklas 953:
954: .if defined(GNU_CONFIGURE)
955: CONFIGURE_ARGS+= --prefix=${PREFIX}
1.79 ! espie 956: CONFIGURE_ARGS+= --sysconfdir=${SYSCONFDIR}
1.1 niklas 957: HAS_CONFIGURE= yes
1.73 marc 958: .endif
959:
960: .if defined(NO_SHARED_LIBS)
961: CONFIGURE_SHARED?= --disable-shared
962: .else
963: CONFIGURE_SHARED?= --enable-shared
1.1 niklas 964: .endif
965:
1.13 imp 966: # Passed to most of script invocations
1.44 marc 967: SCRIPTS_ENV+= CURDIR=${.CURDIR} DISTDIR=${DISTDIR} \
1.52 espie 968: PATH=${PORTPATH} \
1.60 rohee 969: WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} WRKBUILD=${WRKBUILD} \
970: PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
1.13 imp 971: PORTSDIR=${PORTSDIR} DEPENDS="${DEPENDS}" \
972: PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
973:
974: .if defined(BATCH)
975: SCRIPTS_ENV+= BATCH=yes
976: .endif
977:
1.9 imp 978: MANPREFIX?= ${PREFIX}
1.44 marc 979: CATPREFIX?= ${PREFIX}
1.9 imp 980:
981: .for sect in 1 2 3 4 5 6 7 8 9
982: MAN${sect}PREFIX?= ${MANPREFIX}
1.44 marc 983: CAT${sect}PREFIX?= ${CATPREFIX}
1.9 imp 984: .endfor
985: MANLPREFIX?= ${MANPREFIX}
986: MANNPREFIX?= ${MANPREFIX}
1.44 marc 987: CATLPREFIX?= ${CATPREFIX}
988: CATNPREFIX?= ${CATPREFIX}
1.9 imp 989:
990: MANLANG?= "" # english only by default
991:
992: .for lang in ${MANLANG}
993:
994: .for sect in 1 2 3 4 5 6 7 8 9
995: .if defined(MAN${sect})
996: _MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect}/%}
997: .endif
1.44 marc 998: .if defined(CAT${sect})
999: _CATPAGES+= ${CAT${sect}:S%^%${CAT${sect}PREFIX}/man/${lang}/cat${sect}/%}
1000: .endif
1.9 imp 1001: .endfor
1002:
1003: .if defined(MANL)
1004: _MANPAGES+= ${MANL:S%^%${MANLPREFIX}/man/${lang}/manl/%}
1005: .endif
1006:
1007: .if defined(MANN)
1008: _MANPAGES+= ${MANN:S%^%${MANNPREFIX}/man/${lang}/mann/%}
1009: .endif
1010:
1.44 marc 1011: .if defined(CATL)
1012: _CATPAGES+= ${CATL:S%^%${CATLPREFIX}/man/${lang}/catl/%}
1013: .endif
1.9 imp 1014:
1.44 marc 1015: .if defined(CATN)
1016: _CATPAGES+= ${CATN:S%^%${CATNPREFIX}/man/${lang}/catn/%}
1.9 imp 1017: .endif
1018:
1.44 marc 1019: .endfor
1020:
1.1 niklas 1021: .MAIN: all
1022:
1023: ################################################################
1024: # Many ways to disable a port.
1025: #
1026: # If we're in BATCH mode and the port is interactive, or we're
1027: # in interactive mode and the port is non-interactive, skip all
1028: # the important targets. The reason we have two modes is that
1029: # one might want to leave a build in BATCH mode running
1030: # overnight, then come back in the morning and do _only_ the
1031: # interactive ones that required your intervention.
1032: #
1033: # Don't attempt to build ports that require Motif if you don't
1034: # have Motif.
1035: #
1036: # Ignore ports that can't be resold if building for a CDROM.
1037: #
1038: # Don't build a port if it's restricted and we don't want to get
1039: # into that.
1040: #
1041: # Don't build a port if it's broken.
1.27 marc 1042: #
1043: # Don't build a port if it comes with the base system.
1.1 niklas 1044: ################################################################
1045:
1.13 imp 1046: .if !defined(NO_IGNORE)
1.9 imp 1047: .if (defined(IS_INTERACTIVE) && defined(BATCH))
1048: IGNORE= "is an interactive port"
1049: .elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
1050: IGNORE= "is not an interactive port"
1051: .elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF))
1052: IGNORE= "requires Motif"
1.13 imp 1053: .elif (defined(MOTIF_ONLY) && !defined(REQUIRES_MOTIF))
1054: IGNORE= "does not require Motif"
1.9 imp 1055: .elif (defined(NO_CDROM) && defined(FOR_CDROM))
1056: IGNORE= "may not be placed on a CDROM: ${NO_CDROM}"
1057: .elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
1058: IGNORE= "is restricted: ${RESTRICTED}"
1.13 imp 1059: .elif ((defined(USE_IMAKE) || defined(USE_X11)) && !exists(${X11BASE}))
1060: IGNORE= "uses X11, but ${X11BASE} not found"
1.9 imp 1061: .elif defined(BROKEN)
1062: IGNORE= "is marked as broken: ${BROKEN}"
1.29 marc 1063: .elif defined(ONLY_FOR_ARCHS)
1064: .for __ARCH in ${ONLY_FOR_ARCHS}
1.48 form 1065: .if (${MACHINE_ARCH} == "${__ARCH}") || (${ARCH} == "${__ARCH}")
1.29 marc 1066: __ARCH_OK= 1
1067: .endif
1068: .endfor
1069: .if !defined(__ARCH_OK)
1.48 form 1070: .if ${MACHINE_ARCH} == "${ARCH}"
1.44 marc 1071: IGNORE= "is only for ${ONLY_FOR_ARCHS}, not ${MACHINE_ARCH}"
1.48 form 1072: .else
1073: IGNORE= "is only for ${ONLY_FOR_ARCHS}, not ${MACHINE_ARCH} \(${ARCH}\)"
1074: .endif
1.29 marc 1075: .endif
1.27 marc 1076: .elif defined(COMES_WITH)
1.32 marc 1077: .if ( ${OPSYS_VER} >= ${COMES_WITH} )
1.41 marc 1078: IGNORE= "-- ${PKGNAME:C/-[0-9].*//g} comes with ${OPSYS} as of release ${COMES_WITH}"
1.27 marc 1079: .endif
1.1 niklas 1080: .endif
1081:
1082: .if defined(IGNORE)
1.9 imp 1083: .if defined(IGNORE_SILENT)
1084: IGNORECMD= ${DO_NADA}
1085: .else
1086: IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} ${IGNORE}."
1087: .endif
1088: fetch:
1089: @${IGNORECMD}
1090: checksum:
1091: @${IGNORECMD}
1092: extract:
1093: @${IGNORECMD}
1094: patch:
1095: @${IGNORECMD}
1096: configure:
1097: @${IGNORECMD}
1.1 niklas 1098: all:
1.9 imp 1099: @${IGNORECMD}
1.1 niklas 1100: build:
1.9 imp 1101: @${IGNORECMD}
1.1 niklas 1102: install:
1.9 imp 1103: @${IGNORECMD}
1.44 marc 1104: uninstall deinstall:
1105: @${IGNORECMD}
1.1 niklas 1106: package:
1.9 imp 1107: @${IGNORECMD}
1.44 marc 1108: .endif # IGNORE
1109: .endif # !NO_IGNORE
1.1 niklas 1110:
1111: .if defined(ALL_HOOK)
1112: all:
1.6 niklas 1113: @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
1.60 rohee 1114: DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} WRKBUILD=${WRKBUILD}\
1.1 niklas 1115: PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
1116: FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
1117: DEPENDS="${DEPENDS}" BUILD_DEPENDS="${BUILD_DEPENDS}" \
1118: RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \
1119: ${ALL_HOOK}
1120: .endif
1121:
1122: .if !target(all)
1123: all: build
1124: .endif
1125:
1.13 imp 1126: .if !defined(DEPENDS_TARGET)
1127: .if make(reinstall)
1128: DEPENDS_TARGET= reinstall
1129: .else
1130: DEPENDS_TARGET= install
1.1 niklas 1131: .endif
1132: .endif
1133:
1134: ################################################################
1135: # The following are used to create easy dummy targets for
1136: # disabling some bit of default target behavior you don't want.
1137: # They still check to see if the target exists, and if so don't
1138: # do anything, since you might want to set this globally for a
1139: # group of ports in a Makefile.inc, but still be able to
1140: # override from an individual Makefile.
1141: ################################################################
1142:
1.9 imp 1143: # Disable checksum
1.76 espie 1144: .if defined(NO_CHECKSUM)
1145: .for _TARGET in checksum makesum addsum
1146: .if !target(${_TARGET})
1147: ${_TARGET}: fetch
1.9 imp 1148: @${DO_NADA}
1149: .endif
1.76 espie 1150: .endfor
1151: .endif
1.9 imp 1152:
1.1 niklas 1153: # Disable extract
1154: .if defined(NO_EXTRACT) && !target(extract)
1.61 espie 1155: extract:
1.1 niklas 1156: @${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
1.76 espie 1157: checksum makesum addsum: fetch
1.50 espie 1158: @${DO_NADA}
1.1 niklas 1159: .endif
1160:
1.9 imp 1161: # Disable patch
1162: .if defined(NO_PATCH) && !target(patch)
1163: patch: extract
1164: @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
1165: .endif
1166:
1.1 niklas 1167: # Disable configure
1168: .if defined(NO_CONFIGURE) && !target(configure)
1169: configure: patch
1170: @${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
1171: .endif
1172:
1173: # Disable build
1174: .if defined(NO_BUILD) && !target(build)
1175: build: configure
1176: @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
1177: .endif
1178:
1.9 imp 1179: # Disable install
1180: .if defined(NO_INSTALL) && !target(install)
1181: install: build
1182: @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
1183: .endif
1184:
1.1 niklas 1185: # Disable package
1186: .if defined(NO_PACKAGE) && !target(package)
1187: package:
1.9 imp 1188: .if defined(IGNORE_SILENT)
1.1 niklas 1189: @${DO_NADA}
1.9 imp 1190: .else
1191: @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
1.1 niklas 1192: .endif
1193: .endif
1194:
1.9 imp 1195: # Disable describe
1196: .if defined(NO_DESCRIBE) && !target(describe)
1197: describe:
1198: @${DO_NADA}
1.1 niklas 1199: .endif
1200:
1201: ################################################################
1202: # More standard targets start here.
1203: #
1204: # These are the body of the build/install framework. If you are
1205: # not happy with the default actions, and you can't solve it by
1206: # adding pre-* or post-* targets/scripts, override these.
1207: ################################################################
1208:
1209: # Fetch
1210:
1211: .if !target(do-fetch)
1212: do-fetch:
1.9 imp 1213: @${MKDIR} ${_DISTDIR}
1214: @(cd ${_DISTDIR}; \
1.1 niklas 1215: for file in ${DISTFILES}; do \
1216: if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
1217: if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
1.9 imp 1218: ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
1.1 niklas 1219: ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
1220: ${ECHO_MSG} ">> Please correct this problem and try again."; \
1221: exit 1; \
1.28 marc 1222: fi ; \
1223: if [ ! -z ${CDROM_COPY} ]; then \
1224: if ${CDROM_COPY} ${CDROM_OPT} ${CDROM_SITE}/$$file .; then \
1225: continue; \
1226: fi ; \
1.1 niklas 1227: fi ; \
1228: ${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
1.46 form 1229: if [ ! -w ${_DISTDIR}/. ]; then \
1230: ${ECHO_MSG} ">> Can't download to ${_DISTDIR} (permission denied?)."; \
1231: exit 1; \
1232: fi; \
1.1 niklas 1233: for site in ${MASTER_SITES}; do \
1234: ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
1.6 niklas 1235: if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
1.1 niklas 1236: continue 2; \
1237: fi \
1238: done; \
1.6 niklas 1239: ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
1.9 imp 1240: ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
1.1 niklas 1241: exit 1; \
1242: fi \
1243: done)
1244: .if defined(PATCHFILES)
1.9 imp 1245: @(cd ${_DISTDIR}; \
1.1 niklas 1246: for file in ${PATCHFILES}; do \
1247: if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
1248: if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
1.9 imp 1249: ${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
1.1 niklas 1250: ${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
1251: ${ECHO_MSG} ">> Please correct this problem and try again."; \
1252: exit 1; \
1253: fi ; \
1254: ${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
1255: for site in ${PATCH_SITES}; do \
1256: ${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
1.6 niklas 1257: if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
1.1 niklas 1258: continue 2; \
1259: fi \
1260: done; \
1.6 niklas 1261: ${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
1.9 imp 1262: ${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
1.1 niklas 1263: exit 1; \
1264: fi \
1265: done)
1266: .endif
1267: .endif
1268:
1.44 marc 1269: # This is for the use of sites which store distfiles which others may
1270: # fetch - only fetch the distfile if it is allowed to be
1271: # re-distributed freely
1272: mirror-distfiles:
1273: .if (${MIRROR_DISTFILE} == "yes")
1.54 marc 1274: @make fetch __ARCH_OK=yes NO_IGNORE=yes NO_WARNINGS=yes
1.44 marc 1275: .endif
1276:
1.1 niklas 1277: # Extract
1278:
1279: .if !target(do-extract)
1280: do-extract:
1.6 niklas 1281: .if !defined(NO_WRKDIR)
1.14 niklas 1282: .if defined(WRKOBJDIR)
1283: @${RM} -rf ${WRKOBJDIR}/${PORTSUBDIR}
1.44 marc 1284: @${MKDIR} -p ${WRKOBJDIR}/${PORTSUBDIR}
1.18 niklas 1285: @if [ ! -L ${WRKDIR} ] || \
1286: [ X`${READLINK} ${WRKDIR}` != X${WRKOBJDIR}/${PORTSUBDIR} ]; then \
1287: echo "${WRKDIR} -> ${WRKOBJDIR}/${PORTSUBDIR}"; \
1288: ${RM} -f ${WRKDIR}; \
1289: ${LN} -sf ${WRKOBJDIR}/${PORTSUBDIR} ${WRKDIR}; \
1290: fi
1.14 niklas 1291: .else
1.1 niklas 1292: @${RM} -rf ${WRKDIR}
1.9 imp 1293: @${MKDIR} ${WRKDIR}
1.6 niklas 1294: .endif
1.14 niklas 1295: .endif
1.1 niklas 1296: @for file in ${EXTRACT_ONLY}; do \
1.10 niklas 1297: if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
1.1 niklas 1298: then \
1299: exit 1; \
1300: fi \
1301: done
1302: .endif
1303:
1304: # Patch
1305:
1306: .if !target(do-patch)
1307: do-patch:
1308: .if defined(PATCHFILES)
1309: @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}"
1.9 imp 1310: @(cd ${_DISTDIR}; \
1.1 niklas 1311: for i in ${PATCHFILES}; do \
1.6 niklas 1312: if [ ${PATCH_DEBUG_TMP} = yes ]; then \
1313: ${ECHO_MSG} "===> Applying distribution patch $$i" ; \
1314: fi; \
1.1 niklas 1315: case $$i in \
1316: *.Z|*.gz) \
1317: ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
1318: ;; \
1319: *) \
1320: ${PATCH} ${PATCH_DIST_ARGS} < $$i; \
1321: ;; \
1322: esac; \
1323: done)
1324: .endif
1325: @if [ -d ${PATCHDIR} ]; then \
1.52 espie 1326: (cd ${PATCHDIR}; \
1327: for i in ${PATCH_LIST}; do \
1.50 espie 1328: case $$i in \
1329: *.orig|*.rej|*~) \
1330: ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
1331: ;; \
1332: *) \
1333: if [ -e $$i ]; then \
1.6 niklas 1334: if [ ${PATCH_DEBUG_TMP} = yes ]; then \
1.9 imp 1335: ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
1.6 niklas 1336: fi; \
1337: ${PATCH} ${PATCH_ARGS} < $$i; \
1.50 espie 1338: else \
1339: ${ECHO_MSG} "===> Can't find patch matching $$i"; \
1340: if [ -d ${PATCHDIR}/CVS -a "$$i" = \
1341: "${PATCHDIR}/patch-*" ]; then \
1342: ${ECHO_MSG} "===> Perhaps you forgot the -P flag to cvs co or update?"; \
1343: fi; \
1344: fi; \
1345: ;; \
1346: esac; \
1.52 espie 1347: done) \
1.1 niklas 1348: fi
1349: .endif
1350:
1351: # Configure
1352:
1353: .if !target(do-configure)
1.60 rohee 1354: do-configure: ${WRKBUILD}
1.52 espie 1355: .if defined(USE_AUTOCONF)
1356: @cd ${AUTOCONF_DIR} && ${SETENV} ${AUTOCONF_ENV} ${AUTOCONF}
1357: .endif
1.7 niklas 1358: @if [ -f ${SCRIPTDIR}/configure ]; then \
1.13 imp 1359: cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
1360: ${SCRIPTDIR}/configure; \
1.1 niklas 1361: fi
1362: .if defined(HAS_CONFIGURE)
1.60 rohee 1363: @(cd ${WRKBUILD} && CC="${CC}" ac_cv_path_CC="${CC}" CFLAGS="${CFLAGS}" \
1.47 espie 1364: CXX="${CXX}" ac_cv_path_CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \
1.59 marc 1365: INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \
1366: INSTALL_PROGRAM="${INSTALL_PROGRAM}" INSTALL_MAN="${INSTALL_MAN}" \
1367: INSTALL_SCRIPT="${INSTALL_SCRIPT}" INSTALL_DATA="${INSTALL_DATA}" \
1.74 marc 1368: ${CONFIGURE_ENV} ${_CONFIGURE_SCRIPT} ${CONFIGURE_ARGS})
1.1 niklas 1369: .endif
1370: .if defined(USE_IMAKE)
1.44 marc 1371: @(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${XMKMF})
1.1 niklas 1372: .endif
1373: .endif
1374:
1.60 rohee 1375: ${WRKBUILD}:
1376: ${MKDIR} ${WRKBUILD}
1377:
1.1 niklas 1378: # Build
1379:
1380: .if !target(do-build)
1381: do-build:
1.60 rohee 1382: @(cd ${WRKBUILD}; ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET})
1.1 niklas 1383: .endif
1384:
1385: # Install
1386:
1387: .if !target(do-install)
1388: do-install:
1.60 rohee 1389: @(cd ${WRKBUILD} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
1.1 niklas 1390: .endif
1391:
1392: # Package
1393:
1394: .if !target(do-package)
1395: do-package:
1.13 imp 1396: @if [ -e ${PLIST} ]; then \
1.1 niklas 1397: ${ECHO_MSG} "===> Building package for ${PKGNAME}"; \
1398: if [ -d ${PACKAGES} ]; then \
1399: if [ ! -d ${PKGREPOSITORY} ]; then \
1.9 imp 1400: if ! ${MKDIR} ${PKGREPOSITORY}; then \
1.1 niklas 1401: ${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \
1402: exit 1; \
1403: fi; \
1404: fi; \
1405: fi; \
1406: if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
1407: if [ -d ${PACKAGES} ]; then \
1408: ${MAKE} ${.MAKEFLAGS} package-links; \
1409: fi; \
1410: else \
1411: ${MAKE} ${.MAKEFLAGS} delete-package; \
1412: exit 1; \
1413: fi; \
1414: fi
1415: .endif
1416:
1417: # Some support rules for do-package
1418:
1419: .if !target(package-links)
1420: package-links:
1421: @${MAKE} ${.MAKEFLAGS} delete-package-links
1422: @for cat in ${CATEGORIES}; do \
1423: if [ ! -d ${PACKAGES}/$$cat ]; then \
1.9 imp 1424: if ! ${MKDIR} ${PACKAGES}/$$cat; then \
1.1 niklas 1425: ${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \
1426: exit 1; \
1427: fi; \
1428: fi; \
1429: ln -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
1430: done;
1431: .endif
1432:
1433: .if !target(delete-package-links)
1434: delete-package-links:
1435: @${RM} -f ${PACKAGES}/[a-z]*/${PKGNAME}${PKG_SUFX};
1436: .endif
1437:
1438: .if !target(delete-package)
1439: delete-package:
1440: @${MAKE} ${.MAKEFLAGS} delete-package-links
1441: @${RM} -f ${PKGFILE}
1442: .endif
1443:
1444: ################################################################
1445: # This is the "generic" port target, actually a macro used from the
1446: # six main targets. See below for more.
1447: ################################################################
1448:
1449: _PORT_USE: .USE
1450: .if make(real-fetch)
1.6 niklas 1451: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
1.1 niklas 1452: .endif
1453: .if make(real-extract)
1.6 niklas 1454: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends lib-depends misc-depends
1.1 niklas 1455: .endif
1456: .if make(real-install)
1.13 imp 1457: .if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
1.40 espie 1458: @if [ -d ${PKG_DBDIR}/${PKGNAME} -o "X$$(ls -d ${PKG_DBDIR}/${PKGNAME:C/-[0-9].*//g}-* 2> /dev/null)" != "X" ]; then \
1.13 imp 1459: ${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \
1.44 marc 1460: ${ECHO_MSG} " If so, you may wish to \`\`make deinstall'' and install"; \
1.13 imp 1461: ${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \
1462: ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGNAME}"; \
1463: ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
1464: ${ECHO_MSG} " in your environment or the \"make install\" command line."; \
1465: exit 1; \
1466: fi
1467: .endif
1.14 niklas 1468: @if [ `${SH} -c umask` != ${DEF_UMASK} ]; then \
1.13 imp 1469: ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \
1470: ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
1471: ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
1472: fi
1.9 imp 1473: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends lib-depends
1.1 niklas 1474: .endif
1475: .if make(real-install)
1.56 form 1476: @touch ${INSTALL_PRE_COOKIE}
1.1 niklas 1477: .if !defined(NO_MTREE)
1478: @if [ `id -u` = 0 ]; then \
1.13 imp 1479: if [ ! -f ${MTREE_FILE} ]; then \
1480: ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
1481: ${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \
1482: exit 1; \
1483: else \
1.44 marc 1484: if [ ! -d ${PREFIX} ]; then \
1485: mkdir -p ${PREFIX}; \
1486: fi; \
1.13 imp 1487: ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/; \
1488: fi; \
1.1 niklas 1489: else \
1490: ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
1491: ${ECHO_MSG} "Become root and try again to ensure correct permissions."; \
1492: fi
1493: .endif
1494: .endif
1.6 niklas 1495: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/}
1.1 niklas 1496: @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
1.13 imp 1497: cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
1498: ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
1.1 niklas 1499: fi
1.6 niklas 1500: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/}
1501: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/}
1.1 niklas 1502: @if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
1.13 imp 1503: cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
1504: ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \
1.1 niklas 1505: fi
1.44 marc 1506: .if make(real-install) && (defined(_MANPAGES) || defined(_CATPAGES))
1.9 imp 1507: .if defined(MANCOMPRESSED) && defined(NOMANCOMPRESS)
1508: @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
1.44 marc 1509: .for manpage in ${_MANPAGES} ${_CATPAGES}
1510: @${GUNZIP_CMD} ${manpage}.gz
1.9 imp 1511: .endfor
1512: .elif !defined(MANCOMPRESSED) && !defined(NOMANCOMPRESS)
1513: @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
1.44 marc 1514: .for manpage in ${_MANPAGES} ${_CATPAGES}
1515: @if [ -L ${manpage} ]; then \
1516: set - `${FILE} ${manpage}`; \
1.52 espie 1517: shift `${EXPR} $$# - 1`; \
1.44 marc 1518: ${LN} -sf $${1}.gz ${manpage}.gz; \
1519: ${RM} ${manpage}; \
1520: else \
1521: ${GZIP_CMD} ${manpage}; \
1522: fi
1.9 imp 1523: .endfor
1524: .endif
1.65 marc 1525: .endif
1526: .if make(real-install) && exists(${PKGDIR}/MESSAGE)
1527: @${CAT} ${PKGDIR}/MESSAGE
1.9 imp 1528: .endif
1529: .if make(real-install) && !defined(NO_PKG_REGISTER)
1.6 niklas 1530: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg
1.1 niklas 1531: .endif
1.71 espie 1532: .if make(real-extract)
1533: @${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
1534: .endif
1535: .if make(real-patch) && !defined(PATCH_CHECK_ONLY)
1536: @${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
1537: .endif
1538: .if make(real-configure)
1539: @${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
1540: .endif
1541: .if make(real-install)
1542: @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
1543: .endif
1544: .if make(real-build)
1545: @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
1546: .endif
1547: .if make(real-package) && !defined(PACKAGE_NOINSTALL)
1548: @${TOUCH} ${TOUCH_FLAGS} ${PACKAGE_COOKIE}
1.1 niklas 1549: .endif
1550:
1551: ################################################################
1552: # Skeleton targets start here
1553: #
1554: # You shouldn't have to change these. Either add the pre-* or
1555: # post-* targets/scripts or redefine the do-* targets. These
1556: # targets don't do anything other than checking for cookies and
1557: # call the necessary targets/scripts.
1558: ################################################################
1559:
1560: .if !target(fetch)
1561: fetch:
1.6 niklas 1562: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-fetch
1.1 niklas 1563: .endif
1564:
1565: .if !target(extract)
1.61 espie 1566: extract: ${EXTRACT_COOKIE}
1.1 niklas 1567: .endif
1568:
1569: .if !target(patch)
1570: patch: extract ${PATCH_COOKIE}
1571: .endif
1572:
1573: .if !target(configure)
1574: configure: patch ${CONFIGURE_COOKIE}
1575: .endif
1576:
1577: .if !target(build)
1578: build: configure ${BUILD_COOKIE}
1579: .endif
1580:
1581: .if !target(install)
1582: install: build ${INSTALL_COOKIE}
1583: .endif
1584:
1585: .if !target(package)
1586: package: install ${PACKAGE_COOKIE}
1587: .endif
1588:
1.61 espie 1589: ${EXTRACT_COOKIE}:
1590: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} checksum real-extract
1.1 niklas 1591: ${PATCH_COOKIE}:
1.6 niklas 1592: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-patch
1.1 niklas 1593: ${CONFIGURE_COOKIE}:
1.6 niklas 1594: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-configure
1.1 niklas 1595: ${BUILD_COOKIE}:
1.6 niklas 1596: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build
1.1 niklas 1597: ${INSTALL_COOKIE}:
1.6 niklas 1598: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-install
1.1 niklas 1599: ${PACKAGE_COOKIE}:
1.6 niklas 1600: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-package
1.1 niklas 1601:
1602: # And call the macros
1603:
1604: real-fetch: _PORT_USE
1605: real-extract: _PORT_USE
1606: @${ECHO_MSG} "===> Extracting for ${PKGNAME}"
1607: real-patch: _PORT_USE
1608: @${ECHO_MSG} "===> Patching for ${PKGNAME}"
1609: real-configure: _PORT_USE
1610: @${ECHO_MSG} "===> Configuring for ${PKGNAME}"
1611: real-build: _PORT_USE
1612: @${ECHO_MSG} "===> Building for ${PKGNAME}"
1613: real-install: _PORT_USE
1614: @${ECHO_MSG} "===> Installing for ${PKGNAME}"
1615: real-package: _PORT_USE
1616:
1617: # Empty pre-* and post-* targets, note we can't use .if !target()
1618: # in the _PORT_USE macro
1619:
1620: .for name in fetch extract patch configure build install package
1621:
1622: .if !target(pre-${name})
1623: pre-${name}:
1624: @${DO_NADA}
1625: .endif
1626:
1627: .if !target(post-${name})
1628: post-${name}:
1629: @${DO_NADA}
1630: .endif
1631:
1632: .endfor
1633:
1634: # Checkpatch
1635: #
1636: # Special target to verify patches
1.52 espie 1637:
1.1 niklas 1638: .if !target(checkpatch)
1639: checkpatch:
1.6 niklas 1640: @cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${.MAKEFLAGS} patch
1.51 marc 1641: .endif
1.1 niklas 1642:
1643: # Reinstall
1644: #
1645: # Special target to re-run install
1646:
1647: .if !target(reinstall)
1.13 imp 1648: reinstall:
1.32 marc 1649: @${RM} -f ${INSTALL_PRE_COOKIE} ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
1.13 imp 1650: @DEPENDS_TARGET=${DEPENDS_TARGET} ${MAKE} install
1.1 niklas 1651: .endif
1652:
1.44 marc 1653: # Deinstall
1654: #
1655: # Special target to remove installation
1656:
1657: .if !target(deinstall)
1658: uninstall deinstall:
1659: @${ECHO_MSG} "===> Deinstalling for ${PKGNAME}"
1.52 espie 1660: @${PKG_DELETE} -f ${PKGNAME}
1.44 marc 1661: @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
1662: .endif
1663:
1664:
1.1 niklas 1665: ################################################################
1666: # Some more targets supplied for users' convenience
1667: ################################################################
1668:
1669: # Cleaning up
1670:
1671: .if !target(pre-clean)
1672: pre-clean:
1673: @${DO_NADA}
1674: .endif
1675:
1676: .if !target(clean)
1677: clean: pre-clean
1.9 imp 1678: .if !defined(NOCLEANDEPENDS)
1679: @${MAKE} clean-depends
1680: .endif
1.1 niklas 1681: @${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
1.6 niklas 1682: .if !defined(NO_WRKDIR)
1.44 marc 1683: .if defined(WRKOBJDIR)
1684: @${RM} -rf ${WRKOBJDIR}/${PORTSUBDIR}
1685: @${RM} -f ${WRKDIR}
1686: .else
1.9 imp 1687: @if [ -d ${WRKDIR} ]; then \
1688: if [ -w ${WRKDIR} ]; then \
1689: ${RM} -rf ${WRKDIR}; \
1690: else \
1691: ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \
1692: fi; \
1693: fi
1.44 marc 1694: .endif
1.6 niklas 1695: .else
1.1 niklas 1696: @${RM} -f ${WRKDIR}/.*_done
1697: .endif
1698: .endif
1699:
1.9 imp 1700: .if !target(pre-distclean)
1701: pre-distclean:
1702: @${DO_NADA}
1703: .endif
1704:
1705: .if !target(distclean)
1706: distclean: pre-distclean clean
1707: @${ECHO_MSG} "===> Dist cleaning for ${PKGNAME}"
1.13 imp 1708: @(if [ -d ${_DISTDIR} ]; then \
1709: cd ${_DISTDIR}; \
1710: ${RM} -f ${DISTFILES} ${PATCHFILES}; \
1711: fi)
1.9 imp 1712: .if defined(DIST_SUBDIR)
1.13 imp 1713: -@${RMDIR} ${_DISTDIR}
1.9 imp 1714: .endif
1715: .endif
1716:
1.1 niklas 1717: # Prints out a list of files to fetch (useful to do a batch fetch)
1718:
1.44 marc 1719: # are we called from bsd.port.subdir.mk (i.e. do we scan all dirs anyways)? XXX
1720: .ifdef(DIRPRFX)
1721: RECURSIVE_FETCH_LIST?= NO
1722: .else
1723: RECURSIVE_FETCH_LIST?= YES
1724: .endif
1725:
1.1 niklas 1726: .if !target(fetch-list)
1727: fetch-list:
1.44 marc 1728: @${MAKE} fetch-list-recursive RECURSIVE_FETCH_LIST=${RECURSIVE_FETCH_LIST} | sort -u
1729: .endif # !target(fetch-list)
1730:
1731: .if !target(fetch-list-recursive)
1732: fetch-list-recursive:
1733: @${MAKE} fetch-list-one-pkg
1734: .if ${RECURSIVE_FETCH_LIST} != "NO"
1735: @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
1736: (cd $$dir; ${MAKE} fetch-list-recursive; ); \
1737: done
1738: .endif # ${RECURSIVE_FETCH_LIST} != "NO"
1739: .endif # !target(fetch-list-recursive)
1740:
1741: .if !target(fetch-list-one-pkg)
1742: fetch-list-one-pkg:
1.9 imp 1743: @${MKDIR} ${_DISTDIR}
1.44 marc 1744: @[ -z "${_DISTDIR}" ] || ${ECHO} "${MKDIR} ${_DISTDIR}"
1.9 imp 1745: @(cd ${_DISTDIR}; \
1.1 niklas 1746: for file in ${DISTFILES}; do \
1747: if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
1.44 marc 1748: ${ECHO} -n "cd ${_DISTDIR} && [ -f $$file -o -f `${BASENAME} $$file` ] || " ; \
1749: for site in ${MASTER_SITES} ; do \
1750: ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '|| ' ; \
1.1 niklas 1751: done; \
1752: ${ECHO} "echo $${file} not fetched" ; \
1753: fi \
1754: done)
1755: .if defined(PATCHFILES)
1.9 imp 1756: @(cd ${_DISTDIR}; \
1.1 niklas 1757: for file in ${PATCHFILES}; do \
1758: if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
1.44 marc 1759: ${ECHO} -n "cd ${_DISTDIR} && [ -f $$file -o -f `${BASENAME} $$file` ] || " ; \
1.1 niklas 1760: for site in ${PATCH_SITES}; do \
1.44 marc 1761: ${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '|| ' ; \
1.1 niklas 1762: done; \
1763: ${ECHO} "echo $${file} not fetched" ; \
1764: fi \
1.44 marc 1765: done)
1766: .endif # defined(PATCHFILES)
1767: .endif # !target(fetch-list-one-pkg)
1.1 niklas 1768:
1769: # Checksumming utilities
1770:
1771: .if !target(makesum)
1772: makesum: fetch
1.9 imp 1773: @${MKDIR} ${FILESDIR}
1.75 espie 1774: @if [ -f ${CHECKSUM_FILE} ]; then ${RM} -f ${CHECKSUM_FILE}; fi
1.1 niklas 1775: @(cd ${DISTDIR}; \
1.9 imp 1776: for file in ${_CKSUMFILES}; do \
1.75 espie 1777: for cipher in ${CIPHERS:R}; do \
1778: $$cipher $$file >> ${CHECKSUM_FILE}; \
1779: done; \
1.1 niklas 1780: done)
1.9 imp 1781: @for file in ${_IGNOREFILES}; do \
1.75 espie 1782: ${ECHO} "MD5 ($$file) = IGNORE" >> ${CHECKSUM_FILE}; \
1.9 imp 1783: done
1.50 espie 1784: .endif
1785:
1786: .if !target(addsum)
1787: addsum: fetch
1788: @${MKDIR} ${FILESDIR}
1.75 espie 1789: @touch ${CHECKSUM_FILE}
1.50 espie 1790: @(cd ${DISTDIR}; \
1791: for file in ${_CKSUMFILES}; do \
1.75 espie 1792: for cipher in ${CIPHERS:R}; do \
1793: $$cipher $$file >> ${CHECKSUM_FILE}; \
1794: done; \
1.50 espie 1795: done)
1796: @for file in ${_IGNOREFILES}; do \
1.75 espie 1797: ${ECHO} "MD5 ($$file) = IGNORE" >> ${CHECKSUM_FILE}; \
1.50 espie 1798: done
1.75 espie 1799: @sort -u ${CHECKSUM_FILE} >${CHECKSUM_FILE}.new
1800: @${MV} -f ${CHECKSUM_FILE}.new ${CHECKSUM_FILE}
1801: @if [ `${SED} -e 's/\=.*$$//' ${CHECKSUM_FILE} | uniq -d | wc -l` -ne 0 ]; then \
1802: ${ECHO} "Inconsistent checksum in ${CHECKSUM_FILE}"; \
1.76 espie 1803: ${FALSE}; \
1.50 espie 1804: else \
1.75 espie 1805: ${ECHO} "${CHECKSUM_FILE} updated okay, don't forget to remove cruft"; \
1.50 espie 1806: fi
1.1 niklas 1807: .endif
1808:
1809: .if !target(checksum)
1810: checksum: fetch
1.75 espie 1811: @if [ ! -f ${CHECKSUM_FILE} ]; then \
1812: ${ECHO_MSG} ">> No checksum file."; \
1.1 niklas 1813: else \
1.9 imp 1814: (cd ${DISTDIR}; OK="true"; \
1815: for file in ${_CKSUMFILES}; do \
1.75 espie 1816: for cipher_sig in ${PREFERRED_CIPHERS}; do \
1817: sig=`${EXPR} $$cipher_sig : '.*\.\(.*\)'`; \
1818: CKSUM2=`${GREP} "^$$sig ($$file)" ${CHECKSUM_FILE} | ${AWK} '{print $$4}'`; \
1819: if [ "$$CKSUM2" = "" ]; then \
1820: ${ECHO_MSG} ">> No $$sig checksum recorded for $$file."; \
1821: else \
1822: cipher=`${EXPR} $$cipher_sig : '\(.*\)\.'`; \
1823: break; \
1824: fi; \
1825: done; \
1.1 niklas 1826: if [ "$$CKSUM2" = "" ]; then \
1.9 imp 1827: ${ECHO_MSG} ">> No checksum recorded for $$file."; \
1828: OK="false"; \
1829: elif [ "$$CKSUM2" = "IGNORE" ]; then \
1830: ${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \
1831: ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
1.1 niklas 1832: OK="false"; \
1.13 imp 1833: else \
1.75 espie 1834: CKSUM=`$$cipher < $$file`; \
1835: if [ "$$CKSUM" = "$$CKSUM2" ]; then \
1836: ${ECHO_MSG} ">> Checksum OK for $$file. ($$sig)"; \
1837: else \
1838: ${ECHO_MSG} ">> Checksum mismatch for $$file. ($$sig)"; \
1839: OK="false"; \
1840: fi; \
1.1 niklas 1841: fi; \
1842: done; \
1.9 imp 1843: for file in ${_IGNOREFILES}; do \
1.75 espie 1844: CKSUM2=`${GREP} "($$file)" ${CHECKSUM_FILE} | ${AWK} '{print $$4}'`; \
1.9 imp 1845: if [ "$$CKSUM2" = "" ]; then \
1846: ${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
1847: OK="false"; \
1848: elif [ "$$CKSUM2" != "IGNORE" ]; then \
1849: ${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \
1850: ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
1851: OK="false"; \
1852: fi; \
1853: done; \
1.13 imp 1854: if [ "$$OK" != "true" ]; then \
1.75 espie 1855: ${ECHO_MSG} "Make sure the Makefile and checksum file (${CHECKSUM_FILE})"; \
1.13 imp 1856: ${ECHO_MSG} "are up to date. If you want to override this check, type"; \
1857: ${ECHO_MSG} "\"make NO_CHECKSUM=yes [other args]\"."; \
1858: exit 1; \
1.1 niklas 1859: fi) ; \
1860: fi
1.32 marc 1861: .endif
1862:
1863: # packing list utilities. This generates a packing list from a recently
1864: # installed port. Not perfect, but pretty close. The generated file
1865: # will have to have some tweaks done by hand.
1.35 marc 1866: # Note: add @comment PACKAGE(arch=${ARCH}, opsys=${OPSYS}, vers=${OPSYS_VER})
1867: # when port is installed or package created.
1.32 marc 1868: #
1869: .if !target(plist)
1870: plist: install
1871: @${MKDIR} ${PKGDIR}
1872: @(dirs=""; \
1873: ld=""; \
1874: for f in `${MAKE} package-depends|sort -u`; do ${ECHO} "@pkgdep $$f"; done; \
1875: for f in `find ${PREFIX} -newer ${INSTALL_PRE_COOKIE} -print 2> /dev/null`; do \
1876: ff=`${ECHO} $$f | ${SED} -e 's|^${PREFIX}/||'`; \
1.53 form 1877: if [ -d $$f -a ! -h $$f ]; then dirs="$$ff $$dirs"; \
1.32 marc 1878: else \
1879: ${ECHO} $$ff; \
1.45 marc 1880: if ${ECHO} $$f | ${GREP} -E -q -e '[^/]+\.so\.[0-9]+\.[0-9]+$$'; then \
1.32 marc 1881: ld="$$LDCONFIG `${DIRNAME} $$f`"; \
1882: fi; \
1883: fi; \
1884: done; \
1885: for f in $$dirs; do \
1886: if ${GREP} -q -e `${BASENAME} $$f` ${MTREE_FILE}; then \
1887: :; \
1888: else \
1889: ${ECHO} "@dirrm $$f"; \
1890: fi; \
1891: done; \
1892: for f in $$ld; do ${ECHO} "@exec ${LDCONFIG} -m $$f"; done; \
1893: ) > ${PLIST}-auto
1.1 niklas 1894: .endif
1895:
1896: ################################################################
1897: # The special package-building targets
1898: # You probably won't need to touch these
1899: ################################################################
1900:
1.44 marc 1901: HTMLIFY= ${SED} -e 's/&/\&/g' -e 's/>/\>/g' -e 's/</\</g'
1902:
1903: # Set to YES by the README.html target (and passed via depends-list
1904: # and package-depends)
1905: .ifndef PACKAGE_NAME_AS_LINK
1906: PACKAGE_NAME_AS_LINK=NO
1907: .endif # PACKAGE_NAME_AS_LINK
1908:
1909:
1.1 niklas 1910: # Nobody should want to override this unless PKGNAME is simply bogus.
1911:
1912: .if !target(package-name)
1913: package-name:
1.44 marc 1914: .if (${PACKAGE_NAME_AS_LINK} == "YES")
1915: @${ECHO} '<A HREF="../../'`${MAKE} package-path | ${HTMLIFY}`'/README.html">'`echo ${PKGNAME} | ${HTMLIFY}`'</A>'
1916: .else
1917: @${ECHO} '${PKGNAME}'
1918: .endif # PACKAGE_NAME_AS_LINK != ""
1919: .endif # !target(package-name)
1920:
1921: .if !target(package-path)
1922: package-path:
1923: @pwd | sed s@`cd ${PORTSDIR} ; pwd`/@@g
1.1 niklas 1924: .endif
1925:
1926: # Show (recursively) all the packages this package depends on.
1927:
1928: .if !target(package-depends)
1929: package-depends:
1.13 imp 1930: @for dir in `${ECHO} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
1931: if [ -d $$dir ]; then \
1.44 marc 1932: (cd $$dir ; ${MAKE} package-name package-depends PACKAGE_NAME_AS_LINK=${PACKAGE_NAME_AS_LINK}); \
1.13 imp 1933: else \
1934: ${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \
1935: fi; \
1.1 niklas 1936: done
1937: .endif
1938:
1939: # Build a package but don't check the package cookie
1940:
1941: .if !target(repackage)
1942: repackage: pre-repackage package
1943:
1944: pre-repackage:
1945: @${RM} -f ${PACKAGE_COOKIE}
1946: .endif
1947:
1948: # Build a package but don't check the cookie for installation, also don't
1949: # install package cookie
1950:
1951: .if !target(package-noinstall)
1952: package-noinstall:
1.6 niklas 1953: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
1.1 niklas 1954: .endif
1955:
1956: ################################################################
1957: # Dependency checking
1958: ################################################################
1959:
1960: .if !target(depends)
1961: depends: lib-depends misc-depends
1.6 niklas 1962: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
1963: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends
1964: @cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends
1.1 niklas 1965:
1966: .if make(fetch-depends)
1967: DEPENDS_TMP+= ${FETCH_DEPENDS}
1968: .endif
1969:
1970: .if make(build-depends)
1971: DEPENDS_TMP+= ${BUILD_DEPENDS}
1972: .endif
1973:
1974: .if make(run-depends)
1975: DEPENDS_TMP+= ${RUN_DEPENDS}
1976: .endif
1977:
1978: _DEPENDS_USE: .USE
1979: .if defined(DEPENDS_TMP)
1.13 imp 1980: .if !defined(NO_DEPENDS)
1.52 espie 1981: @PATH=${PORTPATH}; \
1982: for i in ${DEPENDS_TMP}; do \
1.1 niklas 1983: prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
1.13 imp 1984: dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
1.52 espie 1985: if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
1.13 imp 1986: target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
1987: dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
1.1 niklas 1988: else \
1.13 imp 1989: target=${DEPENDS_TARGET}; \
1.1 niklas 1990: fi; \
1.44 marc 1991: found=not; \
1.52 espie 1992: if ${EXPR} "$$prog" : \\/ >/dev/null; then \
1.1 niklas 1993: if [ -e "$$prog" ]; then \
1994: ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \
1.44 marc 1995: found=""; \
1.1 niklas 1996: else \
1997: ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \
1998: fi; \
1999: else \
1.44 marc 2000: for d in `echo $$PATH | tr ':' ' '`; do \
2001: if [ -x $$d/$$prog ]; then \
2002: found="$$d/$$prog"; \
2003: break; \
2004: fi \
2005: done; \
2006: ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - $$found found"; \
1.1 niklas 2007: fi; \
1.44 marc 2008: if [ X"$$found" = Xnot ]; then \
1.13 imp 2009: ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \
1.1 niklas 2010: if [ ! -d "$$dir" ]; then \
2011: ${ECHO_MSG} ">> No directory for $$prog. Skipping.."; \
2012: else \
1.13 imp 2013: (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
1.1 niklas 2014: ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
2015: fi; \
2016: fi; \
2017: done
2018: .endif
2019: .else
2020: @${DO_NADA}
2021: .endif
2022:
2023: fetch-depends: _DEPENDS_USE
2024: build-depends: _DEPENDS_USE
2025: run-depends: _DEPENDS_USE
2026:
2027: lib-depends:
2028: .if defined(LIB_DEPENDS)
1.13 imp 2029: .if !defined(NO_DEPENDS)
1.64 marc 2030: .if defined(NO_SHARED_LIBS)
1.16 niklas 2031: @for i in ${LIB_DEPENDS}; do \
1.44 marc 2032: lib=`${ECHO} $$i | ${SED} -e 's/:.*//' -e 's|\([^\\]\)\.|\1\\\\.|g'`; \
1.16 niklas 2033: dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
1.52 espie 2034: if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
1.16 niklas 2035: target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
2036: dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
2037: else \
2038: target=${DEPENDS_TARGET}; \
2039: fi; \
1.17 niklas 2040: tmp=`mktemp /tmp/bpmXXXXXXXXXX`; \
1.42 marc 2041: if ${LD} -r -o $$tmp -L${LOCALBASE}/lib -L${X11BASE}/lib -l$$lib; then \
1.16 niklas 2042: ${ECHO_MSG} "===> ${PKGNAME} depends on library: $$lib - found"; \
2043: else \
2044: ${ECHO_MSG} "===> ${PKGNAME} depends on library: $$lib - not found"; \
2045: ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \
2046: if [ ! -d "$$dir" ]; then \
2047: ${ECHO_MSG} ">> No directory for $$lib. Skipping.."; \
2048: else \
2049: (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
2050: ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
2051: fi; \
2052: fi; \
1.17 niklas 2053: ${RM} -f $$tmp; \
1.16 niklas 2054: done
2055: .else
1.1 niklas 2056: @for i in ${LIB_DEPENDS}; do \
1.44 marc 2057: lib=`${ECHO} $$i | ${SED} -e 's/:.*//' -e 's|\([^\\]\)\.|\1\\\\.|g'`; \
1.13 imp 2058: dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
1.52 espie 2059: if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
1.13 imp 2060: target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
2061: dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
2062: else \
2063: target=${DEPENDS_TARGET}; \
2064: fi; \
1.44 marc 2065: libname=`${ECHO} $$lib | ${SED} -e 's|\\\\||g'`; \
2066: reallib=`${LDCONFIG} -r | ${GREP} -e "-l$$lib" | awk '{ print $$3 }'`; \
2067: if [ "X$$reallib" = X"" ]; then \
2068: ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$libname - not found"; \
2069: ${ECHO_MSG} "===> Verifying $$target for $$libname in $$dir"; \
1.1 niklas 2070: if [ ! -d "$$dir" ]; then \
1.44 marc 2071: ${ECHO_MSG} ">> No directory for $$libname. Skipping.."; \
1.1 niklas 2072: else \
1.13 imp 2073: (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
1.1 niklas 2074: ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
2075: fi; \
1.44 marc 2076: else \
2077: ${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$libname - $$reallib found"; \
1.1 niklas 2078: fi; \
2079: done
1.16 niklas 2080: .endif
1.1 niklas 2081: .endif
2082: .else
2083: @${DO_NADA}
2084: .endif
2085:
2086: misc-depends:
2087: .if defined(DEPENDS)
2088: .if !defined(NO_DEPENDS)
1.13 imp 2089: @for dir in ${DEPENDS}; do \
1.52 espie 2090: if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
1.13 imp 2091: target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
2092: dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
2093: else \
2094: target=${DEPENDS_TARGET}; \
2095: fi; \
2096: ${ECHO_MSG} "===> ${PKGNAME} depends on: $$dir"; \
2097: ${ECHO_MSG} "===> Verifying $$target for $$dir"; \
2098: if [ ! -d $$dir ]; then \
2099: ${ECHO_MSG} ">> No directory for $$dir. Skipping.."; \
1.1 niklas 2100: else \
1.13 imp 2101: (cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
1.1 niklas 2102: fi \
2103: done
2104: @${ECHO_MSG} "===> Returning to build of ${PKGNAME}"
2105: .endif
2106: .else
2107: @${DO_NADA}
2108: .endif
2109:
2110: .endif
2111:
1.9 imp 2112: .if !target(clean-depends)
2113: clean-depends:
2114: .if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) \
2115: || defined(RUN_DEPENDS)
1.13 imp 2116: @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u`; do \
2117: if [ -d $$dir ] ; then \
2118: (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \
2119: fi \
1.9 imp 2120: done
2121: .endif
2122: .if defined(DEPENDS)
1.13 imp 2123: @for dir in `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
2124: if [ -d $$dir ] ; then \
2125: (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \
2126: fi \
1.9 imp 2127: done
2128: .endif
2129: .endif
2130:
1.1 niklas 2131: .if !target(depends-list)
2132: depends-list:
1.13 imp 2133: @for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
1.44 marc 2134: (cd $$dir; ${MAKE} package-name depends-list PACKAGE_NAME_AS_LINK=${PACKAGE_NAME_AS_LINK}; ); \
1.1 niklas 2135: done
2136: .endif
2137:
2138: ################################################################
2139: # Everything after here are internal targets and really
2140: # shouldn't be touched by anybody but the release engineers.
2141: ################################################################
2142:
2143: # This target generates an index entry suitable for aggregation into
2144: # a large index. Format is:
2145: #
2146: # distribution-name|port-path|installation-prefix|comment| \
1.44 marc 2147: # description-file|maintainer|categories|build deps|run deps|for arch
1.1 niklas 2148: #
2149: .if !target(describe)
2150: describe:
1.13 imp 2151: @${ECHO} -n "${PKGNAME}|${.CURDIR}|"; \
2152: ${ECHO} -n "${PREFIX}|"; \
2153: if [ -f ${COMMENT} ]; then \
2154: ${ECHO} -n "`${CAT} ${COMMENT}`"; \
1.1 niklas 2155: else \
2156: ${ECHO} -n "** No Description"; \
1.13 imp 2157: fi; \
2158: if [ -f ${DESCR} ]; then \
2159: ${ECHO} -n "|${DESCR}"; \
1.1 niklas 2160: else \
2161: ${ECHO} -n "|/dev/null"; \
1.13 imp 2162: fi; \
2163: ${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \
2164: case "A${FETCH_DEPENDS}B${BUILD_DEPENDS}C${LIB_DEPENDS}D${DEPENDS}E" in \
2165: ABCDE) ;; \
2166: *) cd ${.CURDIR} && ${ECHO} -n `make depends-list|sort -u`;; \
2167: esac; \
2168: ${ECHO} -n "|"; \
2169: case "A${RUN_DEPENDS}B${LIB_DEPENDS}C${DEPENDS}D" in \
2170: ABCD) ;; \
2171: *) cd ${.CURDIR} && ${ECHO} -n `make package-depends|sort -u`;; \
2172: esac; \
1.44 marc 2173: ${ECHO} -n "|"; \
2174: if [ "${ONLY_FOR_ARCHS}" = "" ]; then \
2175: ${ECHO} -n "any"; \
2176: else \
2177: ${ECHO} -n "${ONLY_FOR_ARCHS}"; \
2178: fi; \
1.13 imp 2179: ${ECHO} ""
1.1 niklas 2180: .endif
2181:
2182: .if !target(readmes)
2183: readmes: readme
2184: .endif
2185:
2186: .if !target(readme)
2187: readme:
2188: @rm -f README.html
1.6 niklas 2189: @cd ${.CURDIR} && make README.html
1.1 niklas 2190: .endif
2191:
1.44 marc 2192: README_NAME= ${TEMPLATES}/README.port
2193:
1.1 niklas 2194: README.html:
2195: @${ECHO_MSG} "===> Creating README.html for ${PKGNAME}"
1.44 marc 2196: @${MAKE} depends-list PACKAGE_NAME_AS_LINK=YES >> $@.tmp1
2197: @[ -s $@.tmp1 ] || echo "(none)" >> $@.tmp1
2198: @${MAKE} package-depends PACKAGE_NAME_AS_LINK=YES >> $@.tmp2
2199: @[ -s $@.tmp2 ] || echo "(none)" >> $@.tmp2
2200: @${ECHO} ${PKGNAME} | ${HTMLIFY} >> $@.tmp3
2201: @${CAT} ${README_NAME} | \
2202: ${SED} -e 's|%%PORT%%|'"`${MAKE} package-path | ${HTMLIFY}`"'|g' \
2203: -e '/%%PKG%%/r$@.tmp3' \
2204: -e '/%%PKG%%/d' \
1.1 niklas 2205: -e '/%%COMMENT%%/r${PKGDIR}/COMMENT' \
2206: -e '/%%COMMENT%%/d' \
1.44 marc 2207: -e '/%%BUILD_DEPENDS%%/r$@.tmp1' \
2208: -e '/%%BUILD_DEPENDS%%/d' \
2209: -e '/%%RUN_DEPENDS%%/r$@.tmp2' \
2210: -e '/%%RUN_DEPENDS%%/d' \
1.1 niklas 2211: >> $@
1.44 marc 2212: @rm -f $@.tmp1 $@.tmp2 $@.tmp3
1.1 niklas 2213:
2214: .if !target(print-depends-list)
2215: print-depends-list:
2216: .if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \
2217: defined(LIB_DEPENDS) || defined(DEPENDS)
2218: @${ECHO} -n 'This port requires package(s) "'
1.9 imp 2219: @${ECHO} -n `make depends-list | sort -u`
1.1 niklas 2220: @${ECHO} '" to build.'
2221: .endif
2222: .endif
2223:
2224: .if !target(print-package-depends)
2225: print-package-depends:
2226: .if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS)
2227: @${ECHO} -n 'This port requires package(s) "'
1.9 imp 2228: @${ECHO} -n `make package-depends | sort -u`
1.1 niklas 2229: @${ECHO} '" to run.'
2230: .endif
2231: .endif
2232:
2233: # Fake installation of package so that user can pkg_delete it later.
2234: # Also, make sure that an installed port is recognized correctly in
2235: # accordance to the @pkgdep directive in the packing lists
2236:
2237: .if !target(fake-pkg)
2238: fake-pkg:
1.13 imp 2239: @if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi
1.66 marc 2240: @if [ `/bin/ls -l ${COMMENT} | ${AWK} '{print $$5}'` -gt 60 ]; then \
2241: ${ECHO} "** ${COMMENT} too large - installation not recorded."; \
2242: exit 1; \
2243: fi
1.9 imp 2244: @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
1.1 niklas 2245: .if defined(FORCE_PKG_REGISTER)
2246: @${RM} -rf ${PKG_DBDIR}/${PKGNAME}
2247: .endif
2248: @if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
2249: ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
1.9 imp 2250: ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
1.1 niklas 2251: ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
1.13 imp 2252: ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
2253: ${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
1.1 niklas 2254: if [ -f ${PKGDIR}/INSTALL ]; then \
2255: ${CP} ${PKGDIR}/INSTALL ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
2256: fi; \
2257: if [ -f ${PKGDIR}/DEINSTALL ]; then \
2258: ${CP} ${PKGDIR}/DEINSTALL ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
2259: fi; \
2260: if [ -f ${PKGDIR}/REQ ]; then \
2261: ${CP} ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQ; \
2262: fi; \
1.44 marc 2263: if [ -f ${PKGDIR}/MESSAGE ]; then \
2264: ${CP} ${PKGDIR}/MESSAGE ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
2265: fi; \
2266: for dep in `make package-depends ECHO_MSG=${TRUE} | sort -u`; do \
1.13 imp 2267: if [ -d ${PKG_DBDIR}/$$dep ]; then \
2268: if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
2269: >/dev/null 2>&1; then \
2270: ${ECHO} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \
2271: fi; \
2272: fi; \
2273: done; \
1.1 niklas 2274: fi
2275: .endif
2276:
2277: # Depend is generally meaningless for arbitrary ports, but if someone wants
2278: # one they can override this. This is just to catch people who've gotten into
2279: # the habit of typing `make depend all install' as a matter of course.
2280: #
2281: .if !target(depend)
2282: depend:
2283: .endif
2284:
2285: # Same goes for tags
2286: .if !target(tags)
2287: tags:
1.10 niklas 2288: .endif
2289:
1.68 espie 2290: .PHONY: \
2291: addsum all build build-depends checkpatch \
2292: checksum clean clean-depends configure deinstall \
2293: delete-package delete-package-links depend depends depends-list \
2294: describe distclean do-build do-configure do-extract \
2295: do-fetch do-install do-package do-patch extract \
2296: fake-pkg fetch fetch-depends fetch-list fetch-list-one-pkg \
2297: fetch-list-recursive install lib-depends makesum mirror-distfiles \
2298: misc-depends package package-depends package-links package-name \
2299: package-noinstall package-path patch plist post-build \
2300: post-configure post-extract post-fetch post-install post-package \
2301: post-patch pre-build pre-clean pre-configure pre-distclean \
2302: pre-extract pre-fetch pre-install pre-package pre-patch \
2303: pre-repackage print-depends-list print-package-depends readme \
2304: readmes real-extract real-fetch real-install reinstall \
2305: repackage run-depends tags uninstall