File: [local] / src / share / mk / bsd.port.mk (download)
Revision 1.9, Wed Dec 25 20:10:09 1996 UTC (27 years, 5 months ago) by imp
Branch: MAIN
Changes since 1.8: +355 -106 lines
Merge our chagnes with FreeBSD's latest changes. We should now
have identical bsd.port.mk files again. This file has successfully
compiled many of the archivers, gnu make, and emacs (althought the emacs
deltas have not been merged back into the FreeBSD tree yet since I don't
have it working yet).
The FreeBSD Id line may be slightly off since I generated it by hand to match
the commit I just made there.
|
#-*- mode: Fundamental; tab-width: 4; -*-
# ex:ts=4
# $OpenBSD: bsd.port.mk,v 1.9 1996/12/25 20:10:09 imp Exp $
# $NetBSD: $
#
# bsd.port.mk - 940820 Jordan K. Hubbard.
# This file is in the public domain.
#
# FreeBSD Id: bsd.port.mk,v 1.241 1996/12/25 02:27:44 imp Exp
#
# Please view me with 4 column tabs!
# This is for this file, not for the ports that includes it, so it's
# commented out -- the person to contact if you have questions/
# suggestions about bsd.port.mk.
#
# MAINTAINER= asami@FreeBSD.ORG
#
# OPENBSD_MAINTAINER= imp@OpenBSD.ORG
#
# Supported Variables and their behaviors:
#
# Variables that typically apply to all ports:
#
# OPSYS - Portability clause. This is the operating system the
# makefile is being used on. Automatically set to
# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
# PORTSDIR - The root of the ports tree. Defaults:
# OpenBSD/FreeBSD: /usr/ports
# NetBSD: /usr/opt
# DISTDIR - Where to get gzip'd, tarballed copies of original sources
# (default: ${PORTSDIR}/distfiles).
# PREFIX - Where to install things in general (default: /usr/local).
# MASTER_SITES - Primary location(s) for distribution files if not found
# locally.
# PATCH_SITES - Primary location(s) for distribution patch files
# (see PATCHFILES below) if not found locally.
#
# MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
# files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
# (default:
# ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
# value.
# MASTER_SITE_FREEBSD - If set, only use ${MASTER_SITE_BACKUP} for
# MASTER_SITES.
# PACKAGES - A top level directory where all packages go (rather than
# going locally to each port). (default: ${PORTSDIR}/packages).
# GMAKE - Set to path of GNU make if not in $PATH (default: gmake).
# XMKMF - Set to path of `xmkmf' if not in $PATH (default: xmkmf -a ).
# MAINTAINER - The e-mail address of the contact person for this port
# (default: ports@FreeBSD.ORG).
# CATEGORIES - A list of descriptive categories into which this port falls.
#
# Variables that typically apply to an individual port. Non-Boolean
# variables without defaults are *mandatory*.
#
# WRKDIR - A temporary working directory that gets *clobbered* on clean
# (default: ${.CURDIR}/work).
# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
# unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
# NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
# DISTNAME - Name of port or distribution.
# DISTFILES - Name(s) of archive file(s) containing distribution
# (default: ${DISTNAME}${EXTRACT_SUFX}).
# PATCHFILES - Name(s) of additional files that contain distribution
# patches (default: none). make will look for them at
# PATCH_SITES (see above). They will automatically be
# uncompressed before patching if the names end with
# ".gz" or ".Z".
# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES}
# and ${PATCHFILES} will be put in this subdirectory of
# ${DISTDIR}. Also they will be fetched in this subdirectory
# from FreeBSD mirror sites.
# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
# IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set
# this variable to their names.
# PKGNAME - Name of the package file to create if the DISTNAME
# isn't really relevant for the port/package
# (default: ${DISTNAME}).
# EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to
# actually extract.
# PATCHDIR - A directory containing any additional patches you made
# to port this software to FreeBSD (default:
# ${.CURDIR}/patches)
# SCRIPTDIR - A directory containing any auxiliary scripts
# (default: ${.CURDIR}/scripts)
# FILESDIR - A directory containing any miscellaneous additional files.
# (default: ${.CURDIR}/files)
# PKGDIR - A direction containing any package creation files.
# (default: ${.CURDIR}/pkg)
# PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
# FORCE_PKG_REGISTER - If set, it will overwrite any existing package
# registration information in ${PKG_DBDIR}/${PKGNAME}.
# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
# the "install" target. This is the default if
# USE_IMAKE or USE_X11 is set.
#
# NO_BUILD - Use a dummy (do-nothing) build target.
# NO_CONFIGURE - Use a dummy (do-nothing) configure target.
# NO_CDROM - Port may not go on CDROM. Set this string to reason.
# NO_DESCRIBE - Use a dummy (do-nothing) describe target.
# NO_EXTRACT - Use a dummy (do-nothing) extract target.
# NO_INSTALL - Use a dummy (do-nothing) install target.
# NO_PACKAGE - Use a dummy (do-nothing) package target.
# NO_PKG_REGISTER - Don't register a port install as a package.
# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
# NO_WRKDIR - There's no work directory at all; port does this someplace
# else.
# NO_DEPENDS - Don't verify build of dependencies.
# BROKEN - Port is broken. Set this string to the reason why.
# RESTRICTED - Port is restricted. Set this string to the reason why.
# USE_GMAKE - Says that the port uses gmake.
# USE_IMAKE - Says that the port uses imake.
# USE_X11 - Says that the port uses X11.
# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
# target.
# HAS_CONFIGURE - Says that the port has its own configure script.
# GNU_CONFIGURE - Set if you are using GNU configure (optional).
# CONFIGURE_SCRIPT - Name of configure script, defaults to 'configure'.
# CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set.
# CONFIGURE_ENV - Pass these env (shell-like) to configure if
# ${HAS_CONFIGURE} is set.
# IS_INTERACTIVE - Set this if your port needs to interact with the user
# during a build. User can then decide to skip this port by
# setting ${BATCH}, or compiling only the interactive ports
# by setting ${INTERACTIVE}.
# FETCH_DEPENDS - A list of "path:dir" pairs of other ports this
# package depends in the "fetch" stage. "path" is the
# name of a file if it starts with a slash (/), an
# executable otherwise. make will test for the
# existence (if it is a full pathname) or search for
# it in your $PATH (if it is an executable) and go
# into "dir" to do a "make all install" if it's not
# found.
# BUILD_DEPENDS - A list of "path:dir" pairs of other ports this
# package depends to build (between the "extract" and
# "build" stages, inclusive). The test done to
# determine the existence of the dependency is the
# same as FETCH_DEPENDS.
# RUN_DEPENDS - A list of "path:dir" pairs of other ports this
# package depends to run. The test done to determine
# the existence of the dependency is the same as
# FETCH_DEPENDS. This will be checked during the
# "install" stage and the name of the dependency will
# be put into the package as well.
# LIB_DEPENDS - A list of "lib:dir" pairs of other ports this package
# depends on. "lib" is the name of a shared library.
# make will use "ldconfig -r" to search for the
# library. Note that lib can be any regular expression,
# and you need two backslashes in front of dots (.) to
# supress its special meaning (e.g., use
# "foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*").
# DEPENDS - A list of other ports this package depends on being
# made first. Use this for things that don't fall into
# the above two categories.
# EXTRACT_CMD - Command for extracting archive (default: tar).
# EXTRACT_SUFX - Suffix for archive names (default: .tar.gz).
# EXTRACT_BEFORE_ARGS -
# Arguments to ${EXTRACT_CMD} before filename
# (default: -C ${WRKDIR} -xzf).
# EXTRACT_AFTER_ARGS -
# Arguments to ${EXTRACT_CMD} following filename
# (default: none).
#
# FETCH_CMD - Full path to ftp/http fetch command if not in $PATH
# (default: /usr/bin/fetch).
# FETCH_BEFORE_ARGS -
# Arguments to ${FETCH_CMD} before filename (default: none).
# FETCH_AFTER_ARGS -
# Arguments to ${FETCH_CMD} following filename (default: none).
#
# Motif support:
#
# REQUIRES_MOTIF - Set this in your port if it requires Motif. It will be
# built only if HAVE_MOTIF is set.
# HAVE_MOTIF - If set, means system has Motif. Typically set in
# /etc/make.conf.
# MOTIF_STATIC - If set, link libXm statically; otherwise, link it
# dynamically. Typically set in /etc/make.conf.
# MOTIFLIB - Set automatically to appropriate value depending on
# ${MOTIF_STATIC}. Substitute references to -lXm with
# patches to make your port conform to our standards.
#
# Variables to change if you want a special behavior:
#
# ECHO_MSG - Used to print all the '===>' style prompts - override this
# to turn them off (default: /bin/echo).
# IS_DEPENDED_TARGET -
# The target to execute when a port is called as a
# dependency (default: install). E.g., "make fetch
# IS_DEPENDED_TARGET=fetch" will fetch all the distfiles,
# including those of dependencies, without actually building
# any of them).
# PATCH_DEBUG - If set, print out more information about the patches as
# it attempts to apply them.
#
# Variables that serve as convenient "aliases" for your *-install targets.
# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
#
# INSTALL_PROGRAM - A command to install binary executables.
# INSTALL_SCRIPT - A command to install executable scripts.
# INSTALL_DATA - A command to install sharable data.
# INSTALL_MAN - A command to install manpages (doesn't compress).
#
# If your port doesn't automatically compress manpages, set the following.
# Depending on the setting of NOMANCOMPRESS, the make rules will compress
# the manpages for you.
#
# MAN<sect> - A list of manpages, categorized by section. For
# example, if your port has "man/man1/foo.1" and
# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
# The available sections chars are "123456789LN".
# MANPREFIX - The directory prefix for ${MAN<sect>} (default: ${PREFIX}).
#
# Default targets and their behaviors:
#
# fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined)
# into ${DISTDIR} as necessary.
# fetch-list - Show list of files that would be retrieved by fetch
# extract - Unpacks ${DISTFILES} into ${WRKDIR}.
# patch - Apply any provided patches to the source.
# configure - Runs either GNU configure, one or more local configure
# scripts or nothing, depending on what's available.
# build - Actually compile the sources.
# install - Install the results of a build.
# reinstall - Install the results of a build, ignoring "already installed"
# flag.
# package - Create a package from an _installed_ port.
# describe - Try to generate a one-line description for each port for
# use in INDEX files and the like.
# checkpatch - Do a "patch -C" instead of a "patch". Note that it may
# give incorrect results if multiple patches deal with
# the same file.
# checksum - Use files/md5 to ensure that your distfiles are valid.
# makesum - Generate files/md5 (only do this for your own ports!).
#
# Default sequence for "all" is: fetch checksum extract patch configure build
#
# Please read the comments in the targets section below, you
# should be able to use the pre-* or post-* targets/scripts
# (which are available for every stage except checksum) or
# override the do-* targets to do pretty much anything you want.
#
# NEVER override the "regular" targets unless you want to open
# a major can of worms.
# Get the operating system type
OPSYS!= uname -s
.if exists(${.CURDIR}/../Makefile.inc)
.include "${.CURDIR}/../Makefile.inc"
.endif
.if (${OPSYS} == "OpenBSD")
NOMANCOMPRESS?=yes
.endif
# These need to be absolute since we don't know how deep in the ports
# tree we are and thus can't go relative. They can, of course, be overridden
# by individual Makefiles or local system make configuration.
.if (${OPSYS} == "NetBSD")
PORTSDIR?= ${DESTDIR}/usr/opt
.else
PORTSDIR?= ${DESTDIR}/usr/ports
.endif
LOCALBASE?= /usr/local
X11BASE?= /usr/X11R6
DISTDIR?= ${PORTSDIR}/distfiles
_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
PACKAGES?= ${PORTSDIR}/packages
TEMPLATES?= ${PORTSDIR}/templates
.if !defined(NO_WRKDIR)
WRKDIR?= ${.CURDIR}/work
.else
WRKDIR?= ${.CURDIR}
.endif
.if defined(NO_WRKSUBDIR)
WRKSRC?= ${WRKDIR}
.else
WRKSRC?= ${WRKDIR}/${DISTNAME}
.endif
PATCHDIR?= ${.CURDIR}/patches
SCRIPTDIR?= ${.CURDIR}/scripts
FILESDIR?= ${.CURDIR}/files
PKGDIR?= ${.CURDIR}/pkg
.if defined(USE_IMAKE) || defined(USE_X11)
PREFIX?= ${X11BASE}
.else
PREFIX?= ${LOCALBASE}
.endif
# The following 4 lines should go away as soon as the ports are all updated
.if defined(EXEC_DEPENDS)
BUILD_DEPENDS+= ${EXEC_DEPENDS}
RUN_DEPENDS+= ${EXEC_DEPENDS}
.endif
.if defined(USE_GMAKE)
BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake
.endif
.if exists(${PORTSDIR}/../Makefile.inc)
.include "${PORTSDIR}/../Makefile.inc"
.endif
# Don't change these!!! These names are built into the _TARGET_USE macro,
# there is no way to refer to them cleanly from within the macro AFAIK.
EXTRACT_COOKIE?= ${WRKDIR}/.extract_done
CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done
INSTALL_COOKIE?= ${WRKDIR}/.install_done
BUILD_COOKIE?= ${WRKDIR}/.build_done
PATCH_COOKIE?= ${WRKDIR}/.patch_done
PACKAGE_COOKIE?= ${WRKDIR}/.package_done
# How to do nothing. Override if you, for some strange reason, would rather
# do something.
DO_NADA?= /usr/bin/true
# Miscellaneous overridable commands:
GMAKE?= gmake
XMKMF?= xmkmf -a
.if exists(/usr/bin/md5)
MD5?= /usr/bin/md5
.elif exists(/bin/md5)
MD5?= /bin/md5
.elif exists(/usr/local/bin/md5)
MD5?= /usr/local/bin/md5
.else
MD5?= /sbin/md5
.endif
MD5_FILE?= ${FILESDIR}/md5
MAKE_FLAGS?= -f
MAKEFILE?= Makefile
MAKE_ENV+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}"
.if (${OPSYS} == "OpenBSD")
FETCH_CMD?= /usr/bin/ftp
.else
FETCH_CMD?= /usr/bin/fetch
.endif
TOUCH?= /usr/bin/touch
TOUCH_FLAGS?= -f
PATCH?= /usr/bin/patch
PATCH_STRIP?= -p0
PATCH_DIST_STRIP?= -p0
.if defined(PATCH_DEBUG)
PATCH_DEBUG_TMP= yes
PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP}
.else
PATCH_DEBUG_TMP= no
PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
.endif
.if defined(BATCH)
PATCH_ARGS+= --batch
PATCH_DIST_ARGS+= --batch
.endif
.if defined(PATCH_CHECK_ONLY)
PATCH_ARGS+= -C
PATCH_DIST_ARGS+= -C
.endif
.if exists(/bin/tar)
EXTRACT_CMD?= /bin/tar
.else
EXTRACT_CMD?= /usr/bin/tar
.endif
EXTRACT_SUFX?= .tar.gz
# Backwards compatability.
.if defined(EXTRACT_ARGS)
EXTRACT_BEFORE_ARGS?= ${EXTRACT_ARGS}
.else
EXTRACT_BEFORE_ARGS?= -xzf
.endif
# Figure out where the local mtree file is
.if !defined(MTREE_LOCAL) && exists(/etc/mtree/BSD.local.dist)
MTREE_LOCAL= /etc/mtree/BSD.local.dist
.endif
MTREE_CMD?= /usr/sbin/mtree
MTREE_ARGS?= -U -f ${MTREE_LOCAL} -d -e -p
.if defined(USE_X11) || defined(USE_IMAKE) || !defined(MTREE_LOCAL)
NO_MTREE= yes
.endif
# A few aliases for *-install targets
INSTALL_PROGRAM= \
${INSTALL} ${COPY} ${STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_SCRIPT= \
${INSTALL} ${COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_DATA= \
${INSTALL} ${COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
INSTALL_MAN= \
${INSTALL} ${COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}
# The user can override the NO_PACKAGE by specifying this from
# the make command line
.if defined(FORCE_PACKAGE)
.undef NO_PACKAGE
.endif
PKG_CMD?= /usr/sbin/pkg_create
.if !defined(PKG_ARGS)
PKG_ARGS= -v -c ${PKGDIR}/COMMENT -d ${PKGDIR}/DESCR -f ${PKGDIR}/PLIST -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`"
.if exists(${PKGDIR}/INSTALL)
PKG_ARGS+= -i ${PKGDIR}/INSTALL
.endif
.if exists(${PKGDIR}/DEINSTALL)
PKG_ARGS+= -k ${PKGDIR}/DEINSTALL
.endif
.if exists(${PKGDIR}/REQ)
PKG_ARGS+= -r ${PKGDIR}/REQ
.endif
.if exists(${PKGDIR}/MESSAGE)
PKG_ARGS+= -D ${PKGDIR}/MESSAGE
.endif
.if !defined(NO_MTREE) && defined(MTREE_LOCAL)
PKG_ARGS+= -m ${MTREE_LOCAL}
.endif
.endif
PKG_SUFX?= .tgz
# where pkg_add records its dirty deeds.
PKG_DBDIR?= /var/db/pkg
# shared/dynamic motif libs
.if defined(HAVE_MOTIF)
.if defined(MOTIF_STATIC)
MOTIFLIB?= ${X11BASE}/lib/libXm.a
.else
MOTIFLIB?= -L${X11BASE}/lib -lXm
.endif
.endif
ECHO?= /bin/echo
CAT?= /bin/cat
CP?= /bin/cp
SETENV?= /usr/bin/env
RM?= /bin/rm
MKDIR?= /bin/mkdir -p
RMDIR?= /bin/rmdir
AWK?= /usr/bin/awk
BASENAME?= /usr/bin/basename
FALSE?= /usr/bin/false
GREP?= /usr/bin/grep
GZCAT?= /usr/bin/gzcat
GZIP?= -9
GZIP_CMD?= /usr/bin/gzip -nf ${GZIP}
GUNZIP_CMD?= /usr/bin/gunzip -f
SED?= /usr/bin/sed
# Used to print all the '===>' style prompts - override this to turn them off.
ECHO_MSG?= ${ECHO}
ALL_TARGET?= all
INSTALL_TARGET?= install
# Popular master sites
MASTER_SITE_XCONTRIB?= \
ftp://ftp.x.org/contrib/${MASTER_SITE_SUBDIR}/ \
ftp://crl.dec.com/pub/X11/contrib/${MASTER_SITE_SUBDIR}/
MASTER_SITE_GNU?= \
ftp://prep.ai.mit.edu/pub/gnu/${MASTER_SITE_SUBDIR}/ \
ftp://wuarchive.wustl.edu/systems/gnu/${MASTER_SITE_SUBDIR}/
MASTER_SITE_PERL_CPAN?= \
ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/${MASTER_SITE_SUBDIR}/ \
ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/${MASTER_SITE_SUBDIR}/
MASTER_SITE_TEX_CTAN?= \
ftp://ftp.cdrom.com/pub/tex/ctan/${MASTER_SITE_SUBDIR}/ \
ftp://wuarchive.wustl.edu/packages/TeX/${MASTER_SITE_SUBDIR}/ \
ftp://ftp.funet.fi/pub/TeX/CTAN/${MASTER_SITE_SUBDIR}/ \
ftp.tex.ac.uk/public/ctan/tex-archive/${MASTER_SITE_SUBDIR}/
MASTER_SITE_SUNSITE?= \
ftp://sunsite.unc.edu/pub/Linux/${MASTER_SITE_SUBDIR}/ \
ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/${MASTER_SITE_SUBDIR}/ \
ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/${MASTER_SITE_SUBDIR}/
# The primary backup site.
MASTER_SITE_BACKUP?= \
ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/
# If the user has this set, go to the FreeBSD repository for everything.
.if defined(MASTER_SITE_FREEBSD)
MASTER_SITE_OVERRIDE= ${MASTER_SITE_BACKUP}
.endif
# Empty declaration to avoid "variable MASTER_SITES recursive" error
MASTER_SITES?=
PATCH_SITES?=
# I guess we're in the master distribution business! :) As we gain mirror
# sites for distfiles, add them to this list.
.if !defined(MASTER_SITE_OVERRIDE)
MASTER_SITES+= ${MASTER_SITE_BACKUP}
PATCH_SITES+= ${MASTER_SITE_BACKUP}
.else
MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${MASTER_SITES}
PATCH_SITES:= ${MASTER_SITE_OVERRIDE} ${PATCH_SITES}
.endif
# Search CDROM first if mounted, symlink instead of copy if
# FETCH_SYMLINK_DISTFILES is set
.if exists(/cdrom/ports/distfiles)
MASTER_SITES:= file:/cdrom/ports/distfiles/${DIST_SUBDIR}/ ${MASTER_SITES}
PATCH_SITES:= file:/cdrom/ports/distfiles/${DIST_SUBDIR}/ ${PATCH_SITES}
.if defined(FETCH_SYMLINK_DISTFILES)
FETCH_BEFORE_ARGS+= -l
.endif
.endif
# Derived names so that they're easily overridable.
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
PKGNAME?= ${DISTNAME}
ALLFILES?= ${DISTFILES} ${PATCHFILES}
.if defined(IGNOREFILES)
CKSUMFILES!= \
for file in ${ALLFILES}; do \
ignore=0; \
for tmp in ${IGNOREFILES}; do \
if [ "$$file" = "$$tmp" ]; then \
ignore=1; \
fi; \
done; \
if [ "$$ignore" = 0 ]; then \
echo "$$file"; \
fi; \
done
.else
CKSUMFILES= ${ALLFILES}
.endif
# List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
.if defined(DIST_SUBDIR)
_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
.else
_CKSUMFILES?= ${CKSUMFILES}
_IGNOREFILES?= ${IGNOREFILES}
.endif
# This is what is actually going to be extracted, and is overridable
# by user.
EXTRACT_ONLY?= ${DISTFILES}
# Documentation
MAINTAINER?= ports@FreeBSD.ORG
.if !defined(CATEGORIES)
.BEGIN:
@${ECHO_MSG} "CATEGORIES is mandatory."
@${FALSE}
.endif
# Note this has to start with a capital letter (or more accurately, it
# shouldn't match "[a-z]*"), see the target "delete-package-links" below.
PKGREPOSITORYSUBDIR?= All
PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
.if exists(${PACKAGES})
PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
.else
PKGFILE?= ${PKGNAME}${PKG_SUFX}
.endif
CONFIGURE_SCRIPT?= configure
.if defined(GNU_CONFIGURE)
CONFIGURE_ARGS+= --prefix=${PREFIX}
HAS_CONFIGURE= yes
.endif
MANPREFIX?= ${PREFIX}
.for sect in 1 2 3 4 5 6 7 8 9
MAN${sect}PREFIX?= ${MANPREFIX}
.endfor
MANLPREFIX?= ${MANPREFIX}
MANNPREFIX?= ${MANPREFIX}
MANLANG?= "" # english only by default
.for lang in ${MANLANG}
.for sect in 1 2 3 4 5 6 7 8 9
.if defined(MAN${sect})
_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect}/%}
.endif
.endfor
.if defined(MANL)
_MANPAGES+= ${MANL:S%^%${MANLPREFIX}/man/${lang}/manl/%}
.endif
.if defined(MANN)
_MANPAGES+= ${MANN:S%^%${MANNPREFIX}/man/${lang}/mann/%}
.endif
.endfor
.if defined(_MANPAGES) && defined(MANCOMPRESSED)
_MANPAGES:= ${_MANPAGES:S/$/.gz/}
.endif
.MAIN: all
################################################################
# Many ways to disable a port.
#
# If we're in BATCH mode and the port is interactive, or we're
# in interactive mode and the port is non-interactive, skip all
# the important targets. The reason we have two modes is that
# one might want to leave a build in BATCH mode running
# overnight, then come back in the morning and do _only_ the
# interactive ones that required your intervention.
#
# Don't attempt to build ports that require Motif if you don't
# have Motif.
#
# Ignore ports that can't be resold if building for a CDROM.
#
# Don't build a port if it's restricted and we don't want to get
# into that.
#
# Don't build a port if it's broken.
################################################################
.if (defined(IS_INTERACTIVE) && defined(BATCH))
IGNORE= "is an interactive port"
.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
IGNORE= "is not an interactive port"
.elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF))
IGNORE= "requires Motif"
.elif (defined(NO_CDROM) && defined(FOR_CDROM))
IGNORE= "may not be placed on a CDROM: ${NO_CDROM}"
.elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
IGNORE= "is restricted: ${RESTRICTED}"
.elif defined(BROKEN)
IGNORE= "is marked as broken: ${BROKEN}"
.endif
.if defined(IGNORE)
.if defined(IGNORE_SILENT)
IGNORECMD= ${DO_NADA}
.else
IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} ${IGNORE}."
.endif
fetch:
@${IGNORECMD}
checksum:
@${IGNORECMD}
extract:
@${IGNORECMD}
patch:
@${IGNORECMD}
configure:
@${IGNORECMD}
all:
@${IGNORECMD}
build:
@${IGNORECMD}
install:
@${IGNORECMD}
package:
@${IGNORECMD}
.endif
.if defined(ALL_HOOK)
all:
@cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \
PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" BUILD_DEPENDS="${BUILD_DEPENDS}" \
RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \
${ALL_HOOK}
.endif
.if !target(all)
all: build
.endif
.if !defined(IS_DEPENDED_TARGET)
IS_DEPENDED_TARGET= install
.endif
.if !target(is_depended)
is_depended: ${IS_DEPENDED_TARGET}
.endif
################################################################
# The following are used to create easy dummy targets for
# disabling some bit of default target behavior you don't want.
# They still check to see if the target exists, and if so don't
# do anything, since you might want to set this globally for a
# group of ports in a Makefile.inc, but still be able to
# override from an individual Makefile.
################################################################
# Disable checksum
.if defined(NO_CHECKSUM) && !target(checksum)
checksum: fetch
@${DO_NADA}
.endif
# Disable extract
.if defined(NO_EXTRACT) && !target(extract)
extract: checksum
@${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
checksum: fetch
@${DO_NADA}
makesum:
@${DO_NADA}
.endif
# Disable patch
.if defined(NO_PATCH) && !target(patch)
patch: extract
@${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.endif
# Disable configure
.if defined(NO_CONFIGURE) && !target(configure)
configure: patch
@${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif
# Disable build
.if defined(NO_BUILD) && !target(build)
build: configure
@${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
# Disable install
.if defined(NO_INSTALL) && !target(install)
install: build
@${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
# Disable package
.if defined(NO_PACKAGE) && !target(package)
package:
.if defined(IGNORE_SILENT)
@${DO_NADA}
.else
@${ECHO_MSG} "===> ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
.endif
.endif
# Disable describe
.if defined(NO_DESCRIBE) && !target(describe)
describe:
@${DO_NADA}
.endif
################################################################
# More standard targets start here.
#
# These are the body of the build/install framework. If you are
# not happy with the default actions, and you can't solve it by
# adding pre-* or post-* targets/scripts, override these.
################################################################
# Fetch
.if !target(do-fetch)
do-fetch:
@${MKDIR} ${_DISTDIR}
@(cd ${_DISTDIR}; \
for file in ${DISTFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
${ECHO_MSG} ">> Please correct this problem and try again."; \
exit 1; \
fi ; \
${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
for site in ${MASTER_SITES}; do \
${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
continue 2; \
fi \
done; \
${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
exit 1; \
fi \
done)
.if defined(PATCHFILES)
@(cd ${_DISTDIR}; \
for file in ${PATCHFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
${ECHO_MSG} ">> Please correct this problem and try again."; \
exit 1; \
fi ; \
${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
for site in ${PATCH_SITES}; do \
${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
continue 2; \
fi \
done; \
${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
exit 1; \
fi \
done)
.endif
.endif
# Extract
.if !target(do-extract)
do-extract:
.if !defined(NO_WRKDIR)
@${RM} -rf ${WRKDIR}
@${MKDIR} ${WRKDIR}
.endif
@for file in ${EXTRACT_ONLY}; do \
if !(cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
then \
exit 1; \
fi \
done
.endif
# Patch
.if !target(do-patch)
do-patch:
.if defined(PATCHFILES)
@${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}"
@(cd ${_DISTDIR}; \
for i in ${PATCHFILES}; do \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "===> Applying distribution patch $$i" ; \
fi; \
case $$i in \
*.Z|*.gz) \
${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
;; \
*) \
${PATCH} ${PATCH_DIST_ARGS} < $$i; \
;; \
esac; \
done)
.endif
@if [ -d ${PATCHDIR} ]; then \
if [ "`echo ${PATCHDIR}/patch-*`" = "${PATCHDIR}/patch-*" ]; then \
${ECHO_MSG} "===> Ignoring empty patch directory"; \
if [ -d ${PATCHDIR}/CVS ]; then \
${ECHO_MSG} "===> Perhaps you forgot the -P flag to cvs co or update?"; \
fi; \
else \
${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \
for i in ${PATCHDIR}/patch-*; do \
case $$i in \
*.orig|*~) \
${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
;; \
*) \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
fi; \
${PATCH} ${PATCH_ARGS} < $$i; \
;; \
esac; \
done; \
fi; \
fi
.endif
# Configure
.if !target(do-configure)
do-configure:
@if [ -f ${SCRIPTDIR}/configure ]; then \
cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTDIR=${DISTDIR}\
WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} DEPENDS="${DEPENDS}" \
X11BASE=${X11BASE} /bin/sh ${SCRIPTDIR}/configure; \
fi
.if defined(HAS_CONFIGURE)
@(cd ${WRKSRC} && CC="${CC}" ac_cv_path_CC="${CC}" CFLAGS="${CFLAGS}" \
INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \
INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS})
.endif
.if defined(USE_IMAKE)
@(cd ${WRKSRC} && ${XMKMF})
.endif
.endif
# Build
.if !target(do-build)
do-build:
.if defined(USE_GMAKE)
@(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET})
.else defined(USE_GMAKE)
@(cd ${WRKSRC}; ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET})
.endif
.endif
# Install
.if !target(do-install)
do-install:
@if [ `/bin/sh -c umask` != 0022 ]; then \
${ECHO_MSG} "===> Warning: your umask is \"`/bin/sh -c umask`"\".; \
${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
fi
.if defined(USE_GMAKE)
@(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
@(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} install.man)
.endif
.else defined(USE_GMAKE)
@(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
@(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} install.man)
.endif
.endif
.endif
# Package
.if !target(do-package)
do-package:
@if [ -e ${PKGDIR}/PLIST ]; then \
${ECHO_MSG} "===> Building package for ${PKGNAME}"; \
if [ -d ${PACKAGES} ]; then \
if [ ! -d ${PKGREPOSITORY} ]; then \
if ! ${MKDIR} ${PKGREPOSITORY}; then \
${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \
exit 1; \
fi; \
fi; \
fi; \
if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
if [ -d ${PACKAGES} ]; then \
${MAKE} ${.MAKEFLAGS} package-links; \
fi; \
else \
${MAKE} ${.MAKEFLAGS} delete-package; \
exit 1; \
fi; \
fi
.endif
# Some support rules for do-package
.if !target(package-links)
package-links:
@${MAKE} ${.MAKEFLAGS} delete-package-links
@for cat in ${CATEGORIES}; do \
if [ ! -d ${PACKAGES}/$$cat ]; then \
if ! ${MKDIR} ${PACKAGES}/$$cat; then \
${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \
exit 1; \
fi; \
fi; \
ln -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
done;
.endif
.if !target(delete-package-links)
delete-package-links:
@${RM} -f ${PACKAGES}/[a-z]*/${PKGNAME}${PKG_SUFX};
.endif
.if !target(delete-package)
delete-package:
@${MAKE} ${.MAKEFLAGS} delete-package-links
@${RM} -f ${PKGFILE}
.endif
################################################################
# This is the "generic" port target, actually a macro used from the
# six main targets. See below for more.
################################################################
_PORT_USE: .USE
.if make(real-fetch)
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
.endif
.if make(real-extract)
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends lib-depends misc-depends
.endif
.if make(real-install)
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends lib-depends
.endif
.if make(real-install)
.if !defined(NO_MTREE)
@if [ `id -u` = 0 ]; then \
${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/; \
else \
${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
${ECHO_MSG} "Become root and try again to ensure correct permissions."; \
fi
.endif
.endif
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/}
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} \
WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" X11BASE=${X11BASE} \
/bin/sh ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
fi
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/}
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/}
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTDIR=${DISTDIR}\
WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} DEPENDS="${DEPENDS}" \
X11BASE=${X11BASE} \
/bin/sh ${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \
fi
.if make(real-install) && defined(_MANPAGES)
.if defined(MANCOMPRESSED) && defined(NOMANCOMPRESS)
@${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
.for manpage in ${_MANPAGES}
@${GUNZIP_CMD} ${manpage}
.endfor
.elif !defined(MANCOMPRESSED) && !defined(NOMANCOMPRESS)
@${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
.for manpage in ${_MANPAGES}
@${GZIP_CMD} ${manpage}
.endfor
.endif
.endif
.if make(real-install) && !defined(NO_PKG_REGISTER)
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg
.endif
.if !make(real-fetch) \
&& (!make(real-patch) || !defined(PATCH_CHECK_ONLY)) \
&& (!make(real-package) || !defined(PACKAGE_NOINSTALL))
@${TOUCH} ${TOUCH_FLAGS} ${WRKDIR}/.${.TARGET:S/^real-//}_done
.endif
################################################################
# Skeleton targets start here
#
# You shouldn't have to change these. Either add the pre-* or
# post-* targets/scripts or redefine the do-* targets. These
# targets don't do anything other than checking for cookies and
# call the necessary targets/scripts.
################################################################
.if !target(fetch)
fetch:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-fetch
.endif
.if !target(extract)
extract: checksum ${EXTRACT_COOKIE}
.endif
.if !target(patch)
patch: extract ${PATCH_COOKIE}
.endif
.if !target(configure)
configure: patch ${CONFIGURE_COOKIE}
.endif
.if !target(build)
build: configure ${BUILD_COOKIE}
.endif
.if !target(install)
install: build ${INSTALL_COOKIE}
.endif
.if !target(package)
package: install ${PACKAGE_COOKIE}
.endif
${EXTRACT_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-extract
${PATCH_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-patch
${CONFIGURE_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-configure
${BUILD_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build
${INSTALL_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-install
${PACKAGE_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-package
# And call the macros
real-fetch: _PORT_USE
real-extract: _PORT_USE
@${ECHO_MSG} "===> Extracting for ${PKGNAME}"
real-patch: _PORT_USE
@${ECHO_MSG} "===> Patching for ${PKGNAME}"
real-configure: _PORT_USE
@${ECHO_MSG} "===> Configuring for ${PKGNAME}"
real-build: _PORT_USE
@${ECHO_MSG} "===> Building for ${PKGNAME}"
real-install: _PORT_USE
@${ECHO_MSG} "===> Installing for ${PKGNAME}"
real-package: _PORT_USE
# Empty pre-* and post-* targets, note we can't use .if !target()
# in the _PORT_USE macro
.for name in fetch extract patch configure build install package
.if !target(pre-${name})
pre-${name}:
@${DO_NADA}
.endif
.if !target(post-${name})
post-${name}:
@${DO_NADA}
.endif
.endfor
# Checkpatch
#
# Special target to verify patches
.if !target(checkpatch)
checkpatch:
@cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${.MAKEFLAGS} patch
.endif
# Reinstall
#
# Special target to re-run install
.if !target(reinstall)
reinstall: pre-reinstall install
pre-reinstall:
@${RM} -f ${INSTALL_COOKIE}
@${RM} -f ${PACKAGE_COOKIE}
.endif
################################################################
# Some more targets supplied for users' convenience
################################################################
# Cleaning up
.if !target(pre-clean)
pre-clean:
@${DO_NADA}
.endif
.if !target(clean)
clean: pre-clean
.if !defined(NOCLEANDEPENDS)
@${MAKE} clean-depends
.endif
@${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
.if !defined(NO_WRKDIR)
@if [ -d ${WRKDIR} ]; then \
if [ -w ${WRKDIR} ]; then \
${RM} -rf ${WRKDIR}; \
else \
${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \
fi; \
fi
.else
@${RM} -f ${WRKDIR}/.*_done
.endif
.endif
.if !target(pre-distclean)
pre-distclean:
@${DO_NADA}
.endif
.if !target(distclean)
distclean: pre-distclean clean
@${ECHO_MSG} "===> Dist cleaning for ${PKGNAME}"
@(cd ${_DISTDIR}; \
${RM} -f ${DISTFILES} ${PATCHFILES})
.if defined(DIST_SUBDIR)
@${RMDIR} ${_DISTDIR}
.endif
.endif
# Prints out a list of files to fetch (useful to do a batch fetch)
.if !target(fetch-list)
fetch-list:
@${MKDIR} ${_DISTDIR}
@(cd ${_DISTDIR}; \
for file in ${DISTFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
for site in ${MASTER_SITES}; do \
${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '||' ; \
break; \
done; \
${ECHO} "echo $${file} not fetched" ; \
fi \
done)
.if defined(PATCHFILES)
@(cd ${_DISTDIR}; \
for file in ${PATCHFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
for site in ${PATCH_SITES}; do \
${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '||' ; \
break; \
done; \
${ECHO} "echo $${file} not fetched" ; \
fi \
done)
.endif
.endif
# Checksumming utilities
.if !target(makesum)
makesum: fetch
@${MKDIR} ${FILESDIR}
@if [ -f ${MD5_FILE} ]; then ${RM} -f ${MD5_FILE}; fi
@(cd ${DISTDIR}; \
for file in ${_CKSUMFILES}; do \
${MD5} $$file >> ${MD5_FILE}; \
done)
@for file in ${_IGNOREFILES}; do \
${ECHO} "MD5 ($$file) = IGNORE" >> ${MD5_FILE}; \
done
.endif
.if !target(checksum)
checksum: fetch
@if [ ! -f ${MD5_FILE} ]; then \
${ECHO_MSG} ">> No MD5 checksum file."; \
else \
(cd ${DISTDIR}; OK="true"; \
for file in ${_CKSUMFILES}; do \
CKSUM=`${MD5} < $$file`; \
CKSUM2=`${GREP} "($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
if [ "$$CKSUM2" = "" ]; then \
${ECHO_MSG} ">> No checksum recorded for $$file."; \
OK="false"; \
elif [ "$$CKSUM2" = "IGNORE" ]; then \
${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \
${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
elif [ "$$CKSUM" != "$$CKSUM2" ]; then \
${ECHO_MSG} ">> Checksum mismatch for $$file."; \
exit 1; \
fi; \
done; \
for file in ${_IGNOREFILES}; do \
CKSUM2=`${GREP} "($$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \
if [ "$$CKSUM2" = "" ]; then \
${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
OK="false"; \
elif [ "$$CKSUM2" != "IGNORE" ]; then \
${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \
${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
fi; \
done; \
if [ "$$OK" = "true" ]; then \
${ECHO_MSG} "Checksums OK."; \
else \
${ECHO_MSG} "There may be some inconsistencies, make sure the Makefile and md5 file"; \
${ECHO_MSG} "(\"${MD5_FILE}\") are up to date."; \
fi) ; \
fi
.endif
################################################################
# The special package-building targets
# You probably won't need to touch these
################################################################
# Nobody should want to override this unless PKGNAME is simply bogus.
.if !target(package-name)
package-name:
@${ECHO} ${PKGNAME}
.endif
# Show (recursively) all the packages this package depends on.
.if !target(package-depends)
package-depends:
@for i in ${RUN_DEPENDS} ${LIB_DEPENDS} ${DEPENDS}; do \
dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \
(cd $$dir ; ${MAKE} package-name package-depends); \
done
.endif
# Build a package but don't check the package cookie
.if !target(repackage)
repackage: pre-repackage package
pre-repackage:
@${RM} -f ${PACKAGE_COOKIE}
.endif
# Build a package but don't check the cookie for installation, also don't
# install package cookie
.if !target(package-noinstall)
package-noinstall:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
.endif
################################################################
# Dependency checking
################################################################
.if !target(depends)
depends: lib-depends misc-depends
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends
.if make(fetch-depends)
DEPENDS_TMP+= ${FETCH_DEPENDS}
.endif
.if make(build-depends)
DEPENDS_TMP+= ${BUILD_DEPENDS}
.endif
.if make(run-depends)
DEPENDS_TMP+= ${RUN_DEPENDS}
.endif
_DEPENDS_USE: .USE
.if defined(DEPENDS_TMP)
.if defined(NO_DEPENDS)
# Just print out messages
@for i in ${DEPENDS_TMP}; do \
prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \
if expr "$$prog" : \\/ >/dev/null; then \
${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog ($$dir)"; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog ($$dir)"; \
fi; \
done
.else
@for i in ${DEPENDS_TMP}; do \
prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \
if expr "$$prog" : \\/ >/dev/null; then \
if [ -e "$$prog" ]; then \
${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \
notfound=0; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \
notfound=1; \
fi; \
else \
if which "$$prog" > /dev/null 2>&1 ; then \
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \
notfound=0; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \
notfound=1; \
fi; \
fi; \
if [ $$notfound != 0 ]; then \
${ECHO_MSG} "===> Verifying build for $$prog in $$dir"; \
if [ ! -d "$$dir" ]; then \
${ECHO_MSG} ">> No directory for $$prog. Skipping.."; \
else \
(cd $$dir; ${MAKE} ${.MAKEFLAGS} is_depended) ; \
${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
fi; \
fi; \
done
.endif
.else
@${DO_NADA}
.endif
fetch-depends: _DEPENDS_USE
build-depends: _DEPENDS_USE
run-depends: _DEPENDS_USE
lib-depends:
.if defined(LIB_DEPENDS)
.if defined(NO_DEPENDS)
# Just print out messages
@for i in ${LIB_DEPENDS}; do \
lib=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \
${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib ($$dir)"; \
done
.else
@for i in ${LIB_DEPENDS}; do \
lib=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \
if /sbin/ldconfig -r | ${GREP} -q -e "-l$$lib"; then \
${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - found"; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$lib - not found"; \
${ECHO_MSG} "===> Verifying build for $$lib in $$dir"; \
if [ ! -d "$$dir" ]; then \
${ECHO_MSG} ">> No directory for $$lib. Skipping.."; \
else \
(cd $$dir; ${MAKE} ${.MAKEFLAGS} is_depended) ; \
${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
fi; \
fi; \
done
.endif
.else
@${DO_NADA}
.endif
misc-depends:
.if defined(DEPENDS)
@${ECHO_MSG} "===> ${PKGNAME} depends on: ${DEPENDS}"
.if !defined(NO_DEPENDS)
@for i in ${DEPENDS}; do \
${ECHO_MSG} "===> Verifying build for $$i"; \
if [ ! -d $$i ]; then \
${ECHO_MSG} ">> No directory for $$i. Skipping.."; \
else \
(cd $$i; ${MAKE} ${.MAKEFLAGS} is_depended) ; \
fi \
done
@${ECHO_MSG} "===> Returning to build of ${PKGNAME}"
.endif
.else
@${DO_NADA}
.endif
.endif
.if !target(clean-depends)
clean-depends:
.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) \
|| defined(RUN_DEPENDS)
@for i in ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}; do \
dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \
if [ -d $$dir ] ; then (cd $$dir; ${MAKE} clean); fi \
done
.endif
.if defined(DEPENDS)
@for dir in ${DEPENDS}; do \
if [ -d $$dir ] ; then (cd $$dir; ${MAKE} clean); fi \
done
.endif
.endif
.if !target(depends-list)
depends-list:
@for i in ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}; do \
dir=`${ECHO} $$i | ${SED} -e 's/.*://'`; \
(cd $$dir; ${MAKE} package-name depends-list); \
done
@for dir in ${DEPENDS}; do \
(cd $$dir; ${MAKE} package-name depends-list); \
done
.endif
################################################################
# Everything after here are internal targets and really
# shouldn't be touched by anybody but the release engineers.
################################################################
# This target generates an index entry suitable for aggregation into
# a large index. Format is:
#
# distribution-name|port-path|installation-prefix|comment| \
# description-file|maintainer|categories|build deps|run deps
#
.if !target(describe)
describe:
@${ECHO} -n "${PKGNAME}|${.CURDIR}|"
@${ECHO} -n "${PREFIX}|"
@if [ -f ${PKGDIR}/COMMENT ]; then \
${ECHO} -n "`${CAT} ${PKGDIR}/COMMENT`"; \
else \
${ECHO} -n "** No Description"; \
fi
@if [ -f ${PKGDIR}/DESCR ]; then \
${ECHO} -n "|${PKGDIR}/DESCR"; \
else \
${ECHO} -n "|/dev/null"; \
fi
@${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"
@cd ${.CURDIR} && ${ECHO} -n `make depends-list|sort -u`
@${ECHO} -n "|"
@cd ${.CURDIR} && ${ECHO} -n `make package-depends|sort -u`
@${ECHO} ""
.endif
.if !target(readmes)
readmes: readme
.endif
.if !target(readme)
readme:
@rm -f README.html
@cd ${.CURDIR} && make README.html
.endif
README.html:
@${ECHO_MSG} "===> Creating README.html for ${PKGNAME}"
@${CAT} ${TEMPLATES}/README.port | \
${SED} -e 's%%PORT%%'`${ECHO} ${.CURDIR} | ${SED} -e 's.*/\([^/]*/[^/]*\)$$\1'`'g' \
-e 's%%PKG%%${PKGNAME}g' \
-e '/%%COMMENT%%/r${PKGDIR}/COMMENT' \
-e '/%%COMMENT%%/d' \
-e 's%%BUILD_DEPENDS%%'"`${MAKE} print-depends-list`"'' \
-e 's%%RUN_DEPENDS%%'"`${MAKE} print-package-depends`"'' \
>> $@
.if !target(print-depends-list)
print-depends-list:
.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \
defined(LIB_DEPENDS) || defined(DEPENDS)
@${ECHO} -n 'This port requires package(s) "'
@${ECHO} -n `make depends-list | sort -u`
@${ECHO} '" to build.'
.endif
.endif
.if !target(print-package-depends)
print-package-depends:
.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS)
@${ECHO} -n 'This port requires package(s) "'
@${ECHO} -n `make package-depends | sort -u`
@${ECHO} '" to run.'
.endif
.endif
# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed port is recognized correctly in
# accordance to the @pkgdep directive in the packing lists
.if !target(fake-pkg)
fake-pkg:
@if [ ! -f ${PKGDIR}/PLIST -o ! -f ${PKGDIR}/COMMENT -o ! -f ${PKGDIR}/DESCR ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi
@if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
.if defined(FORCE_PKG_REGISTER)
@${RM} -rf ${PKG_DBDIR}/${PKGNAME}
.endif
@if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
${CP} ${PKGDIR}/DESCR ${PKG_DBDIR}/${PKGNAME}/+DESC; \
${CP} ${PKGDIR}/COMMENT ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
if [ -f ${PKGDIR}/INSTALL ]; then \
${CP} ${PKGDIR}/INSTALL ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
fi; \
if [ -f ${PKGDIR}/DEINSTALL ]; then \
${CP} ${PKGDIR}/DEINSTALL ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
fi; \
if [ -f ${PKGDIR}/REQ ]; then \
${CP} ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQ; \
fi; \
else \
${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \
${ECHO_MSG} " If so, you may wish to \`\`pkg_delete ${PKGNAME}'' and install"; \
${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \
fi
.endif
# Depend is generally meaningless for arbitrary ports, but if someone wants
# one they can override this. This is just to catch people who've gotten into
# the habit of typing `make depend all install' as a matter of course.
#
.if !target(depend)
depend:
.endif
# Same goes for tags
.if !target(tags)
tags:
.endif
![[BACK]](/icons/back.gif){kind=icon}
Return to bsd.port.mk CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / src / share / mk