Annotation of src/share/snmp/SNMPv2-MIB.txt, Revision 1.1
1.1 ! martijn 1: SNMPv2-MIB DEFINITIONS ::= BEGIN
! 2:
! 3: IMPORTS
! 4: MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
! 5: TimeTicks, Counter32, snmpModules, mib-2
! 6: FROM SNMPv2-SMI
! 7: DisplayString, TestAndIncr, TimeStamp
! 8:
! 9: FROM SNMPv2-TC
! 10: MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
! 11: FROM SNMPv2-CONF;
! 12:
! 13: snmpMIB MODULE-IDENTITY
! 14: LAST-UPDATED "200210160000Z"
! 15: ORGANIZATION "IETF SNMPv3 Working Group"
! 16: CONTACT-INFO
! 17: "WG-EMail: snmpv3@lists.tislabs.com
! 18: Subscribe: snmpv3-request@lists.tislabs.com
! 19:
! 20: Co-Chair: Russ Mundy
! 21: Network Associates Laboratories
! 22: postal: 15204 Omega Drive, Suite 300
! 23: Rockville, MD 20850-4601
! 24: USA
! 25: EMail: mundy@tislabs.com
! 26: phone: +1 301 947-7107
! 27:
! 28: Co-Chair: David Harrington
! 29: Enterasys Networks
! 30: postal: 35 Industrial Way
! 31: P. O. Box 5005
! 32: Rochester, NH 03866-5005
! 33: USA
! 34: EMail: dbh@enterasys.com
! 35: phone: +1 603 337-2614
! 36:
! 37: Editor: Randy Presuhn
! 38: BMC Software, Inc.
! 39: postal: 2141 North First Street
! 40: San Jose, CA 95131
! 41: USA
! 42: EMail: randy_presuhn@bmc.com
! 43: phone: +1 408 546-1006"
! 44: DESCRIPTION
! 45: "The MIB module for SNMP entities.
! 46:
! 47: Copyright (C) The Internet Society (2002). This
! 48: version of this MIB module is part of RFC 3418;
! 49: see the RFC itself for full legal notices.
! 50: "
! 51: REVISION "200210160000Z"
! 52: DESCRIPTION
! 53: "This revision of this MIB module was published as
! 54: RFC 3418."
! 55: REVISION "199511090000Z"
! 56: DESCRIPTION
! 57: "This revision of this MIB module was published as
! 58: RFC 1907."
! 59: REVISION "199304010000Z"
! 60: DESCRIPTION
! 61: "The initial revision of this MIB module was published
! 62: as RFC 1450."
! 63: ::= { snmpModules 1 }
! 64:
! 65: snmpMIBObjects OBJECT IDENTIFIER ::= { snmpMIB 1 }
! 66:
! 67: -- ::= { snmpMIBObjects 1 } this OID is obsolete
! 68: -- ::= { snmpMIBObjects 2 } this OID is obsolete
! 69: -- ::= { snmpMIBObjects 3 } this OID is obsolete
! 70:
! 71: -- the System group
! 72: --
! 73: -- a collection of objects common to all managed systems.
! 74:
! 75: system OBJECT IDENTIFIER ::= { mib-2 1 }
! 76:
! 77: sysDescr OBJECT-TYPE
! 78: SYNTAX DisplayString (SIZE (0..255))
! 79: MAX-ACCESS read-only
! 80: STATUS current
! 81: DESCRIPTION
! 82: "A textual description of the entity. This value should
! 83: include the full name and version identification of
! 84: the system's hardware type, software operating-system,
! 85: and networking software."
! 86: ::= { system 1 }
! 87:
! 88: sysObjectID OBJECT-TYPE
! 89: SYNTAX OBJECT IDENTIFIER
! 90: MAX-ACCESS read-only
! 91: STATUS current
! 92: DESCRIPTION
! 93: "The vendor's authoritative identification of the
! 94: network management subsystem contained in the entity.
! 95: This value is allocated within the SMI enterprises
! 96: subtree (1.3.6.1.4.1) and provides an easy and
! 97: unambiguous means for determining `what kind of box' is
! 98: being managed. For example, if vendor `Flintstones,
! 99: Inc.' was assigned the subtree 1.3.6.1.4.1.424242,
! 100: it could assign the identifier 1.3.6.1.4.1.424242.1.1
! 101: to its `Fred Router'."
! 102: ::= { system 2 }
! 103:
! 104: sysUpTime OBJECT-TYPE
! 105: SYNTAX TimeTicks
! 106: MAX-ACCESS read-only
! 107: STATUS current
! 108: DESCRIPTION
! 109: "The time (in hundredths of a second) since the
! 110: network management portion of the system was last
! 111: re-initialized."
! 112: ::= { system 3 }
! 113:
! 114: sysContact OBJECT-TYPE
! 115: SYNTAX DisplayString (SIZE (0..255))
! 116: MAX-ACCESS read-write
! 117: STATUS current
! 118: DESCRIPTION
! 119: "The textual identification of the contact person for
! 120: this managed node, together with information on how
! 121: to contact this person. If no contact information is
! 122: known, the value is the zero-length string."
! 123: ::= { system 4 }
! 124:
! 125: sysName OBJECT-TYPE
! 126: SYNTAX DisplayString (SIZE (0..255))
! 127: MAX-ACCESS read-write
! 128: STATUS current
! 129: DESCRIPTION
! 130: "An administratively-assigned name for this managed
! 131: node. By convention, this is the node's fully-qualified
! 132: domain name. If the name is unknown, the value is
! 133: the zero-length string."
! 134: ::= { system 5 }
! 135:
! 136: sysLocation OBJECT-TYPE
! 137: SYNTAX DisplayString (SIZE (0..255))
! 138: MAX-ACCESS read-write
! 139: STATUS current
! 140: DESCRIPTION
! 141: "The physical location of this node (e.g., 'telephone
! 142: closet, 3rd floor'). If the location is unknown, the
! 143: value is the zero-length string."
! 144: ::= { system 6 }
! 145:
! 146: sysServices OBJECT-TYPE
! 147: SYNTAX INTEGER (0..127)
! 148: MAX-ACCESS read-only
! 149: STATUS current
! 150: DESCRIPTION
! 151: "A value which indicates the set of services that this
! 152: entity may potentially offer. The value is a sum.
! 153:
! 154: This sum initially takes the value zero. Then, for
! 155: each layer, L, in the range 1 through 7, that this node
! 156: performs transactions for, 2 raised to (L - 1) is added
! 157: to the sum. For example, a node which performs only
! 158: routing functions would have a value of 4 (2^(3-1)).
! 159: In contrast, a node which is a host offering application
! 160: services would have a value of 72 (2^(4-1) + 2^(7-1)).
! 161: Note that in the context of the Internet suite of
! 162: protocols, values should be calculated accordingly:
! 163:
! 164: layer functionality
! 165: 1 physical (e.g., repeaters)
! 166: 2 datalink/subnetwork (e.g., bridges)
! 167: 3 internet (e.g., supports the IP)
! 168: 4 end-to-end (e.g., supports the TCP)
! 169: 7 applications (e.g., supports the SMTP)
! 170:
! 171: For systems including OSI protocols, layers 5 and 6
! 172: may also be counted."
! 173: ::= { system 7 }
! 174:
! 175: -- object resource information
! 176: --
! 177: -- a collection of objects which describe the SNMP entity's
! 178: -- (statically and dynamically configurable) support of
! 179: -- various MIB modules.
! 180:
! 181: sysORLastChange OBJECT-TYPE
! 182: SYNTAX TimeStamp
! 183: MAX-ACCESS read-only
! 184: STATUS current
! 185: DESCRIPTION
! 186: "The value of sysUpTime at the time of the most recent
! 187: change in state or value of any instance of sysORID."
! 188: ::= { system 8 }
! 189:
! 190: sysORTable OBJECT-TYPE
! 191: SYNTAX SEQUENCE OF SysOREntry
! 192: MAX-ACCESS not-accessible
! 193: STATUS current
! 194: DESCRIPTION
! 195: "The (conceptual) table listing the capabilities of
! 196: the local SNMP application acting as a command
! 197: responder with respect to various MIB modules.
! 198: SNMP entities having dynamically-configurable support
! 199: of MIB modules will have a dynamically-varying number
! 200: of conceptual rows."
! 201: ::= { system 9 }
! 202:
! 203: sysOREntry OBJECT-TYPE
! 204: SYNTAX SysOREntry
! 205: MAX-ACCESS not-accessible
! 206: STATUS current
! 207: DESCRIPTION
! 208: "An entry (conceptual row) in the sysORTable."
! 209: INDEX { sysORIndex }
! 210: ::= { sysORTable 1 }
! 211:
! 212: SysOREntry ::= SEQUENCE {
! 213: sysORIndex INTEGER,
! 214: sysORID OBJECT IDENTIFIER,
! 215: sysORDescr DisplayString,
! 216: sysORUpTime TimeStamp
! 217: }
! 218:
! 219: sysORIndex OBJECT-TYPE
! 220: SYNTAX INTEGER (1..2147483647)
! 221: MAX-ACCESS not-accessible
! 222: STATUS current
! 223: DESCRIPTION
! 224: "The auxiliary variable used for identifying instances
! 225: of the columnar objects in the sysORTable."
! 226: ::= { sysOREntry 1 }
! 227:
! 228: sysORID OBJECT-TYPE
! 229: SYNTAX OBJECT IDENTIFIER
! 230: MAX-ACCESS read-only
! 231: STATUS current
! 232: DESCRIPTION
! 233: "An authoritative identification of a capabilities
! 234: statement with respect to various MIB modules supported
! 235: by the local SNMP application acting as a command
! 236: responder."
! 237: ::= { sysOREntry 2 }
! 238:
! 239: sysORDescr OBJECT-TYPE
! 240: SYNTAX DisplayString
! 241: MAX-ACCESS read-only
! 242: STATUS current
! 243: DESCRIPTION
! 244: "A textual description of the capabilities identified
! 245: by the corresponding instance of sysORID."
! 246: ::= { sysOREntry 3 }
! 247:
! 248: sysORUpTime OBJECT-TYPE
! 249: SYNTAX TimeStamp
! 250: MAX-ACCESS read-only
! 251: STATUS current
! 252: DESCRIPTION
! 253: "The value of sysUpTime at the time this conceptual
! 254: row was last instantiated."
! 255: ::= { sysOREntry 4 }
! 256:
! 257: -- the SNMP group
! 258: --
! 259: -- a collection of objects providing basic instrumentation and
! 260: -- control of an SNMP entity.
! 261:
! 262: snmp OBJECT IDENTIFIER ::= { mib-2 11 }
! 263:
! 264: snmpInPkts OBJECT-TYPE
! 265: SYNTAX Counter32
! 266: MAX-ACCESS read-only
! 267: STATUS current
! 268: DESCRIPTION
! 269: "The total number of messages delivered to the SNMP
! 270: entity from the transport service."
! 271: ::= { snmp 1 }
! 272:
! 273: snmpInBadVersions OBJECT-TYPE
! 274: SYNTAX Counter32
! 275: MAX-ACCESS read-only
! 276: STATUS current
! 277: DESCRIPTION
! 278: "The total number of SNMP messages which were delivered
! 279: to the SNMP entity and were for an unsupported SNMP
! 280: version."
! 281: ::= { snmp 3 }
! 282:
! 283: snmpInBadCommunityNames OBJECT-TYPE
! 284: SYNTAX Counter32
! 285: MAX-ACCESS read-only
! 286: STATUS current
! 287: DESCRIPTION
! 288: "The total number of community-based SNMP messages (for
! 289: example, SNMPv1) delivered to the SNMP entity which
! 290: used an SNMP community name not known to said entity.
! 291: Also, implementations which authenticate community-based
! 292: SNMP messages using check(s) in addition to matching
! 293: the community name (for example, by also checking
! 294: whether the message originated from a transport address
! 295: allowed to use a specified community name) MAY include
! 296: in this value the number of messages which failed the
! 297: additional check(s). It is strongly RECOMMENDED that
! 298:
! 299: the documentation for any security model which is used
! 300: to authenticate community-based SNMP messages specify
! 301: the precise conditions that contribute to this value."
! 302: ::= { snmp 4 }
! 303:
! 304: snmpInBadCommunityUses OBJECT-TYPE
! 305: SYNTAX Counter32
! 306: MAX-ACCESS read-only
! 307: STATUS current
! 308: DESCRIPTION
! 309: "The total number of community-based SNMP messages (for
! 310: example, SNMPv1) delivered to the SNMP entity which
! 311: represented an SNMP operation that was not allowed for
! 312: the SNMP community named in the message. The precise
! 313: conditions under which this counter is incremented
! 314: (if at all) depend on how the SNMP entity implements
! 315: its access control mechanism and how its applications
! 316: interact with that access control mechanism. It is
! 317: strongly RECOMMENDED that the documentation for any
! 318: access control mechanism which is used to control access
! 319: to and visibility of MIB instrumentation specify the
! 320: precise conditions that contribute to this value."
! 321: ::= { snmp 5 }
! 322:
! 323: snmpInASNParseErrs OBJECT-TYPE
! 324: SYNTAX Counter32
! 325: MAX-ACCESS read-only
! 326: STATUS current
! 327: DESCRIPTION
! 328: "The total number of ASN.1 or BER errors encountered by
! 329: the SNMP entity when decoding received SNMP messages."
! 330: ::= { snmp 6 }
! 331:
! 332: snmpEnableAuthenTraps OBJECT-TYPE
! 333: SYNTAX INTEGER { enabled(1), disabled(2) }
! 334: MAX-ACCESS read-write
! 335: STATUS current
! 336: DESCRIPTION
! 337: "Indicates whether the SNMP entity is permitted to
! 338: generate authenticationFailure traps. The value of this
! 339: object overrides any configuration information; as such,
! 340: it provides a means whereby all authenticationFailure
! 341: traps may be disabled.
! 342:
! 343: Note that it is strongly recommended that this object
! 344: be stored in non-volatile memory so that it remains
! 345: constant across re-initializations of the network
! 346: management system."
! 347: ::= { snmp 30 }
! 348:
! 349: snmpSilentDrops OBJECT-TYPE
! 350: SYNTAX Counter32
! 351: MAX-ACCESS read-only
! 352: STATUS current
! 353: DESCRIPTION
! 354: "The total number of Confirmed Class PDUs (such as
! 355: GetRequest-PDUs, GetNextRequest-PDUs,
! 356: GetBulkRequest-PDUs, SetRequest-PDUs, and
! 357: InformRequest-PDUs) delivered to the SNMP entity which
! 358: were silently dropped because the size of a reply
! 359: containing an alternate Response Class PDU (such as a
! 360: Response-PDU) with an empty variable-bindings field
! 361: was greater than either a local constraint or the
! 362: maximum message size associated with the originator of
! 363: the request."
! 364: ::= { snmp 31 }
! 365:
! 366: snmpProxyDrops OBJECT-TYPE
! 367: SYNTAX Counter32
! 368: MAX-ACCESS read-only
! 369: STATUS current
! 370: DESCRIPTION
! 371: "The total number of Confirmed Class PDUs
! 372: (such as GetRequest-PDUs, GetNextRequest-PDUs,
! 373: GetBulkRequest-PDUs, SetRequest-PDUs, and
! 374: InformRequest-PDUs) delivered to the SNMP entity which
! 375: were silently dropped because the transmission of
! 376: the (possibly translated) message to a proxy target
! 377: failed in a manner (other than a time-out) such that
! 378: no Response Class PDU (such as a Response-PDU) could
! 379: be returned."
! 380: ::= { snmp 32 }
! 381:
! 382: -- information for notifications
! 383: --
! 384: -- a collection of objects which allow the SNMP entity, when
! 385: -- supporting a notification originator application,
! 386: -- to be configured to generate SNMPv2-Trap-PDUs.
! 387:
! 388: snmpTrap OBJECT IDENTIFIER ::= { snmpMIBObjects 4 }
! 389:
! 390: snmpTrapOID OBJECT-TYPE
! 391: SYNTAX OBJECT IDENTIFIER
! 392: MAX-ACCESS accessible-for-notify
! 393: STATUS current
! 394: DESCRIPTION
! 395: "The authoritative identification of the notification
! 396: currently being sent. This variable occurs as
! 397: the second varbind in every SNMPv2-Trap-PDU and
! 398: InformRequest-PDU."
! 399: ::= { snmpTrap 1 }
! 400:
! 401: -- ::= { snmpTrap 2 } this OID is obsolete
! 402:
! 403: snmpTrapEnterprise OBJECT-TYPE
! 404: SYNTAX OBJECT IDENTIFIER
! 405: MAX-ACCESS accessible-for-notify
! 406: STATUS current
! 407: DESCRIPTION
! 408: "The authoritative identification of the enterprise
! 409: associated with the trap currently being sent. When an
! 410: SNMP proxy agent is mapping an RFC1157 Trap-PDU
! 411: into a SNMPv2-Trap-PDU, this variable occurs as the
! 412: last varbind."
! 413: ::= { snmpTrap 3 }
! 414:
! 415: -- ::= { snmpTrap 4 } this OID is obsolete
! 416:
! 417: -- well-known traps
! 418:
! 419: snmpTraps OBJECT IDENTIFIER ::= { snmpMIBObjects 5 }
! 420:
! 421: coldStart NOTIFICATION-TYPE
! 422: STATUS current
! 423: DESCRIPTION
! 424: "A coldStart trap signifies that the SNMP entity,
! 425: supporting a notification originator application, is
! 426: reinitializing itself and that its configuration may
! 427: have been altered."
! 428: ::= { snmpTraps 1 }
! 429:
! 430: warmStart NOTIFICATION-TYPE
! 431: STATUS current
! 432: DESCRIPTION
! 433: "A warmStart trap signifies that the SNMP entity,
! 434: supporting a notification originator application,
! 435: is reinitializing itself such that its configuration
! 436: is unaltered."
! 437: ::= { snmpTraps 2 }
! 438:
! 439: -- Note the linkDown NOTIFICATION-TYPE ::= { snmpTraps 3 }
! 440: -- and the linkUp NOTIFICATION-TYPE ::= { snmpTraps 4 }
! 441: -- are defined in RFC 2863 [RFC2863]
! 442:
! 443: authenticationFailure NOTIFICATION-TYPE
! 444: STATUS current
! 445: DESCRIPTION
! 446: "An authenticationFailure trap signifies that the SNMP
! 447: entity has received a protocol message that is not
! 448: properly authenticated. While all implementations
! 449: of SNMP entities MAY be capable of generating this
! 450: trap, the snmpEnableAuthenTraps object indicates
! 451: whether this trap will be generated."
! 452: ::= { snmpTraps 5 }
! 453:
! 454: -- Note the egpNeighborLoss notification is defined
! 455: -- as { snmpTraps 6 } in RFC 1213
! 456:
! 457: -- the set group
! 458: --
! 459: -- a collection of objects which allow several cooperating
! 460: -- command generator applications to coordinate their use of the
! 461: -- set operation.
! 462:
! 463: snmpSet OBJECT IDENTIFIER ::= { snmpMIBObjects 6 }
! 464:
! 465: snmpSetSerialNo OBJECT-TYPE
! 466: SYNTAX TestAndIncr
! 467: MAX-ACCESS read-write
! 468: STATUS current
! 469: DESCRIPTION
! 470: "An advisory lock used to allow several cooperating
! 471: command generator applications to coordinate their
! 472: use of the SNMP set operation.
! 473:
! 474: This object is used for coarse-grain coordination.
! 475: To achieve fine-grain coordination, one or more similar
! 476: objects might be defined within each MIB group, as
! 477: appropriate."
! 478: ::= { snmpSet 1 }
! 479:
! 480: -- conformance information
! 481:
! 482: snmpMIBConformance
! 483: OBJECT IDENTIFIER ::= { snmpMIB 2 }
! 484:
! 485: snmpMIBCompliances
! 486: OBJECT IDENTIFIER ::= { snmpMIBConformance 1 }
! 487: snmpMIBGroups OBJECT IDENTIFIER ::= { snmpMIBConformance 2 }
! 488:
! 489: -- compliance statements
! 490:
! 491: -- ::= { snmpMIBCompliances 1 } this OID is obsolete
! 492: snmpBasicCompliance MODULE-COMPLIANCE
! 493: STATUS deprecated
! 494: DESCRIPTION
! 495: "The compliance statement for SNMPv2 entities which
! 496: implement the SNMPv2 MIB.
! 497:
! 498: This compliance statement is replaced by
! 499: snmpBasicComplianceRev2."
! 500: MODULE -- this module
! 501: MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
! 502: snmpBasicNotificationsGroup }
! 503:
! 504: GROUP snmpCommunityGroup
! 505: DESCRIPTION
! 506: "This group is mandatory for SNMPv2 entities which
! 507: support community-based authentication."
! 508: ::= { snmpMIBCompliances 2 }
! 509:
! 510: snmpBasicComplianceRev2 MODULE-COMPLIANCE
! 511: STATUS current
! 512: DESCRIPTION
! 513: "The compliance statement for SNMP entities which
! 514: implement this MIB module."
! 515: MODULE -- this module
! 516: MANDATORY-GROUPS { snmpGroup, snmpSetGroup, systemGroup,
! 517: snmpBasicNotificationsGroup }
! 518:
! 519: GROUP snmpCommunityGroup
! 520: DESCRIPTION
! 521: "This group is mandatory for SNMP entities which
! 522: support community-based authentication."
! 523:
! 524: GROUP snmpWarmStartNotificationGroup
! 525: DESCRIPTION
! 526: "This group is mandatory for an SNMP entity which
! 527: supports command responder applications, and is
! 528: able to reinitialize itself such that its
! 529: configuration is unaltered."
! 530: ::= { snmpMIBCompliances 3 }
! 531:
! 532: -- units of conformance
! 533:
! 534: -- ::= { snmpMIBGroups 1 } this OID is obsolete
! 535: -- ::= { snmpMIBGroups 2 } this OID is obsolete
! 536: -- ::= { snmpMIBGroups 3 } this OID is obsolete
! 537:
! 538: -- ::= { snmpMIBGroups 4 } this OID is obsolete
! 539:
! 540: snmpGroup OBJECT-GROUP
! 541: OBJECTS { snmpInPkts,
! 542: snmpInBadVersions,
! 543: snmpInASNParseErrs,
! 544: snmpSilentDrops,
! 545: snmpProxyDrops,
! 546: snmpEnableAuthenTraps }
! 547: STATUS current
! 548: DESCRIPTION
! 549: "A collection of objects providing basic instrumentation
! 550: and control of an SNMP entity."
! 551: ::= { snmpMIBGroups 8 }
! 552:
! 553: snmpCommunityGroup OBJECT-GROUP
! 554: OBJECTS { snmpInBadCommunityNames,
! 555: snmpInBadCommunityUses }
! 556: STATUS current
! 557: DESCRIPTION
! 558: "A collection of objects providing basic instrumentation
! 559: of a SNMP entity which supports community-based
! 560: authentication."
! 561: ::= { snmpMIBGroups 9 }
! 562:
! 563: snmpSetGroup OBJECT-GROUP
! 564: OBJECTS { snmpSetSerialNo }
! 565: STATUS current
! 566: DESCRIPTION
! 567: "A collection of objects which allow several cooperating
! 568: command generator applications to coordinate their
! 569: use of the set operation."
! 570: ::= { snmpMIBGroups 5 }
! 571:
! 572: systemGroup OBJECT-GROUP
! 573: OBJECTS { sysDescr, sysObjectID, sysUpTime,
! 574: sysContact, sysName, sysLocation,
! 575: sysServices,
! 576: sysORLastChange, sysORID,
! 577: sysORUpTime, sysORDescr }
! 578: STATUS current
! 579: DESCRIPTION
! 580: "The system group defines objects which are common to all
! 581: managed systems."
! 582: ::= { snmpMIBGroups 6 }
! 583:
! 584: snmpBasicNotificationsGroup NOTIFICATION-GROUP
! 585: NOTIFICATIONS { coldStart, authenticationFailure }
! 586: STATUS current
! 587: DESCRIPTION
! 588: "The basic notifications implemented by an SNMP entity
! 589: supporting command responder applications."
! 590: ::= { snmpMIBGroups 7 }
! 591:
! 592: snmpWarmStartNotificationGroup NOTIFICATION-GROUP
! 593: NOTIFICATIONS { warmStart }
! 594: STATUS current
! 595: DESCRIPTION
! 596: "An additional notification for an SNMP entity supporting
! 597: command responder applications, if it is able to reinitialize
! 598: itself such that its configuration is unaltered."
! 599: ::= { snmpMIBGroups 11 }
! 600:
! 601: snmpNotificationGroup OBJECT-GROUP
! 602: OBJECTS { snmpTrapOID, snmpTrapEnterprise }
! 603: STATUS current
! 604: DESCRIPTION
! 605: "These objects are required for entities
! 606: which support notification originator applications."
! 607: ::= { snmpMIBGroups 12 }
! 608:
! 609: -- definitions in RFC 1213 made obsolete by the inclusion of a
! 610: -- subset of the snmp group in this MIB
! 611:
! 612: snmpOutPkts OBJECT-TYPE
! 613: SYNTAX Counter32
! 614: MAX-ACCESS read-only
! 615: STATUS obsolete
! 616: DESCRIPTION
! 617: "The total number of SNMP Messages which were
! 618: passed from the SNMP protocol entity to the
! 619: transport service."
! 620: ::= { snmp 2 }
! 621:
! 622: -- { snmp 7 } is not used
! 623:
! 624: snmpInTooBigs OBJECT-TYPE
! 625: SYNTAX Counter32
! 626: MAX-ACCESS read-only
! 627: STATUS obsolete
! 628: DESCRIPTION
! 629: "The total number of SNMP PDUs which were
! 630: delivered to the SNMP protocol entity and for
! 631: which the value of the error-status field was
! 632: `tooBig'."
! 633: ::= { snmp 8 }
! 634:
! 635: snmpInNoSuchNames OBJECT-TYPE
! 636: SYNTAX Counter32
! 637: MAX-ACCESS read-only
! 638: STATUS obsolete
! 639: DESCRIPTION
! 640: "The total number of SNMP PDUs which were
! 641: delivered to the SNMP protocol entity and for
! 642: which the value of the error-status field was
! 643: `noSuchName'."
! 644: ::= { snmp 9 }
! 645:
! 646: snmpInBadValues OBJECT-TYPE
! 647: SYNTAX Counter32
! 648: MAX-ACCESS read-only
! 649: STATUS obsolete
! 650: DESCRIPTION
! 651: "The total number of SNMP PDUs which were
! 652: delivered to the SNMP protocol entity and for
! 653: which the value of the error-status field was
! 654: `badValue'."
! 655: ::= { snmp 10 }
! 656:
! 657: snmpInReadOnlys OBJECT-TYPE
! 658: SYNTAX Counter32
! 659: MAX-ACCESS read-only
! 660: STATUS obsolete
! 661: DESCRIPTION
! 662: "The total number valid SNMP PDUs which were delivered
! 663: to the SNMP protocol entity and for which the value
! 664: of the error-status field was `readOnly'. It should
! 665: be noted that it is a protocol error to generate an
! 666: SNMP PDU which contains the value `readOnly' in the
! 667: error-status field, as such this object is provided
! 668: as a means of detecting incorrect implementations of
! 669: the SNMP."
! 670: ::= { snmp 11 }
! 671:
! 672: snmpInGenErrs OBJECT-TYPE
! 673: SYNTAX Counter32
! 674: MAX-ACCESS read-only
! 675: STATUS obsolete
! 676: DESCRIPTION
! 677: "The total number of SNMP PDUs which were delivered
! 678: to the SNMP protocol entity and for which the value
! 679: of the error-status field was `genErr'."
! 680: ::= { snmp 12 }
! 681:
! 682: snmpInTotalReqVars OBJECT-TYPE
! 683: SYNTAX Counter32
! 684: MAX-ACCESS read-only
! 685: STATUS obsolete
! 686: DESCRIPTION
! 687: "The total number of MIB objects which have been
! 688: retrieved successfully by the SNMP protocol entity
! 689: as the result of receiving valid SNMP Get-Request
! 690: and Get-Next PDUs."
! 691: ::= { snmp 13 }
! 692:
! 693: snmpInTotalSetVars OBJECT-TYPE
! 694: SYNTAX Counter32
! 695: MAX-ACCESS read-only
! 696: STATUS obsolete
! 697: DESCRIPTION
! 698: "The total number of MIB objects which have been
! 699: altered successfully by the SNMP protocol entity as
! 700: the result of receiving valid SNMP Set-Request PDUs."
! 701: ::= { snmp 14 }
! 702:
! 703: snmpInGetRequests OBJECT-TYPE
! 704: SYNTAX Counter32
! 705: MAX-ACCESS read-only
! 706: STATUS obsolete
! 707: DESCRIPTION
! 708: "The total number of SNMP Get-Request PDUs which
! 709: have been accepted and processed by the SNMP
! 710: protocol entity."
! 711: ::= { snmp 15 }
! 712:
! 713: snmpInGetNexts OBJECT-TYPE
! 714: SYNTAX Counter32
! 715: MAX-ACCESS read-only
! 716: STATUS obsolete
! 717: DESCRIPTION
! 718: "The total number of SNMP Get-Next PDUs which have been
! 719: accepted and processed by the SNMP protocol entity."
! 720: ::= { snmp 16 }
! 721:
! 722: snmpInSetRequests OBJECT-TYPE
! 723: SYNTAX Counter32
! 724: MAX-ACCESS read-only
! 725: STATUS obsolete
! 726: DESCRIPTION
! 727: "The total number of SNMP Set-Request PDUs which
! 728: have been accepted and processed by the SNMP protocol
! 729: entity."
! 730: ::= { snmp 17 }
! 731:
! 732: snmpInGetResponses OBJECT-TYPE
! 733: SYNTAX Counter32
! 734: MAX-ACCESS read-only
! 735: STATUS obsolete
! 736: DESCRIPTION
! 737: "The total number of SNMP Get-Response PDUs which
! 738: have been accepted and processed by the SNMP protocol
! 739: entity."
! 740: ::= { snmp 18 }
! 741:
! 742: snmpInTraps OBJECT-TYPE
! 743: SYNTAX Counter32
! 744: MAX-ACCESS read-only
! 745: STATUS obsolete
! 746: DESCRIPTION
! 747: "The total number of SNMP Trap PDUs which have been
! 748: accepted and processed by the SNMP protocol entity."
! 749: ::= { snmp 19 }
! 750:
! 751: snmpOutTooBigs OBJECT-TYPE
! 752: SYNTAX Counter32
! 753: MAX-ACCESS read-only
! 754: STATUS obsolete
! 755: DESCRIPTION
! 756: "The total number of SNMP PDUs which were generated
! 757: by the SNMP protocol entity and for which the value
! 758: of the error-status field was `tooBig.'"
! 759: ::= { snmp 20 }
! 760:
! 761: snmpOutNoSuchNames OBJECT-TYPE
! 762: SYNTAX Counter32
! 763: MAX-ACCESS read-only
! 764: STATUS obsolete
! 765: DESCRIPTION
! 766: "The total number of SNMP PDUs which were generated
! 767: by the SNMP protocol entity and for which the value
! 768: of the error-status was `noSuchName'."
! 769: ::= { snmp 21 }
! 770:
! 771: snmpOutBadValues OBJECT-TYPE
! 772: SYNTAX Counter32
! 773: MAX-ACCESS read-only
! 774: STATUS obsolete
! 775: DESCRIPTION
! 776: "The total number of SNMP PDUs which were generated
! 777: by the SNMP protocol entity and for which the value
! 778: of the error-status field was `badValue'."
! 779: ::= { snmp 22 }
! 780:
! 781: -- { snmp 23 } is not used
! 782:
! 783: snmpOutGenErrs OBJECT-TYPE
! 784: SYNTAX Counter32
! 785: MAX-ACCESS read-only
! 786: STATUS obsolete
! 787: DESCRIPTION
! 788: "The total number of SNMP PDUs which were generated
! 789: by the SNMP protocol entity and for which the value
! 790: of the error-status field was `genErr'."
! 791: ::= { snmp 24 }
! 792:
! 793: snmpOutGetRequests OBJECT-TYPE
! 794: SYNTAX Counter32
! 795: MAX-ACCESS read-only
! 796: STATUS obsolete
! 797: DESCRIPTION
! 798: "The total number of SNMP Get-Request PDUs which
! 799: have been generated by the SNMP protocol entity."
! 800: ::= { snmp 25 }
! 801:
! 802: snmpOutGetNexts OBJECT-TYPE
! 803: SYNTAX Counter32
! 804: MAX-ACCESS read-only
! 805: STATUS obsolete
! 806: DESCRIPTION
! 807: "The total number of SNMP Get-Next PDUs which have
! 808: been generated by the SNMP protocol entity."
! 809: ::= { snmp 26 }
! 810:
! 811: snmpOutSetRequests OBJECT-TYPE
! 812: SYNTAX Counter32
! 813: MAX-ACCESS read-only
! 814: STATUS obsolete
! 815: DESCRIPTION
! 816: "The total number of SNMP Set-Request PDUs which
! 817: have been generated by the SNMP protocol entity."
! 818: ::= { snmp 27 }
! 819:
! 820: snmpOutGetResponses OBJECT-TYPE
! 821: SYNTAX Counter32
! 822: MAX-ACCESS read-only
! 823: STATUS obsolete
! 824: DESCRIPTION
! 825: "The total number of SNMP Get-Response PDUs which
! 826: have been generated by the SNMP protocol entity."
! 827: ::= { snmp 28 }
! 828:
! 829: snmpOutTraps OBJECT-TYPE
! 830: SYNTAX Counter32
! 831: MAX-ACCESS read-only
! 832: STATUS obsolete
! 833: DESCRIPTION
! 834: "The total number of SNMP Trap PDUs which have
! 835: been generated by the SNMP protocol entity."
! 836: ::= { snmp 29 }
! 837:
! 838: snmpObsoleteGroup OBJECT-GROUP
! 839: OBJECTS { snmpOutPkts, snmpInTooBigs, snmpInNoSuchNames,
! 840: snmpInBadValues, snmpInReadOnlys, snmpInGenErrs,
! 841: snmpInTotalReqVars, snmpInTotalSetVars,
! 842: snmpInGetRequests, snmpInGetNexts, snmpInSetRequests,
! 843: snmpInGetResponses, snmpInTraps, snmpOutTooBigs,
! 844: snmpOutNoSuchNames, snmpOutBadValues,
! 845: snmpOutGenErrs, snmpOutGetRequests, snmpOutGetNexts,
! 846: snmpOutSetRequests, snmpOutGetResponses, snmpOutTraps
! 847: }
! 848: STATUS obsolete
! 849: DESCRIPTION
! 850: "A collection of objects from RFC 1213 made obsolete
! 851: by this MIB module."
! 852: ::= { snmpMIBGroups 10 }
! 853:
! 854: END
![[BACK]](/icons/back.gif){kind=icon}
Return to SNMPv2-MIB.txt CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / src / share / snmp