######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
#
# Version 9.13.24
# terminfo syntax
#
# Eric S. Raymond (current maintainer)
# John Kunze, Berkeley
# Craig Leres, Berkeley
#
# Please e-mail changes to terminfo@ccil.org. The old termcap@berkeley.edu
# address is no longer valid.
#
# PURPOSE OF THIS FILE:
#
# This file describes the capabilities of various character-cell terminals,
# as needed by software such as screen-oriented editors.
#
# Other terminfo and termcap files exist, supported by various OS vendors
# or as relics of various older versions of UNIX. This one is the longest
# and most comprehensive one in existence. It subsumes not only the entirety
# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
# termcap file, but also large numbers of vendor-maintained termcap and
# terminfo entries more complete and carefully tested than those in historical
# termcap/terminfo versions.
#
# Pointers to related resources (including the ncurses distribution) may
# be found at <http://www.ccil.org/terminfo>.
#
# INTERNATIONALIZATION:
#
# This file uses only the US-ASCII character set (no ISO8859 characters).
#
# This file assumes a US-ASCII character set. If you need to fix this, start
# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
# for your character set. \E(A and \E)A enables the British character set
# with the pound sign at position 2/3.
#
# In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
# C1 characters are considered the first-byte set of the Japanese encodings,
# so \E)0 should be avoided in <enacs> and initialization strings.
#
# FILE FORMAT:
#
# The version you are looking at may be in any of three formats: master
# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
# which by the format given in the header above.
#
# The master format is accepted and generated by the terminfo tools in the
# ncurses suite; it differs from stock (System V-compatible) terminfo only
# in that it admits a group of capabilities (prefixed `OT') equivalent to
# various obsolete termcap capabilities. You can, thus, convert from master
# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
# you have ncurses `tic -I' is nicer (among other things, it automatically
# outputs entries in a canonical form).
#
# The termcap version is generated automatically from the master version
# using tic -C. This filtering leaves in the OT capabilities under their
# original termcap names. All translated entries fit within the 1023-byte
# string-table limit of archaic termcap libraries except where explicitly
# noted below. Note that the termcap translation assumes that your termcap
# library can handle multiple tc capabilities in an entry. 4.4BSD has this
# capability. Older versions of GNU termcap, through 1.3, do not.
#
# For details on these formats, see terminfo(5) in the ncurses distribution,
# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
# curses has been declared obsolete by the caretakers of the 4.4BSD sources
# as of June 1995; they are encouraging everyone to migrate to ncurses.
#
# Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
# no entry in this file has embedded comments. This is so source translation
# to termcap only has to carry over leading comments. Also, no name field
# contains embedded whitespace (such whitespace confuses rdist).
#
# Further note: older versions of this file were often installed with an editor
# script (reorder) that moved the most common terminal types to the front of
# the file. This should no longer be necessary, as the file is now ordered
# roughly by type frequency with ANSI/VT100 and other common types up front.
#
# Some information has been merged in from terminfo files distributed by
# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
# comes from vendors who maintain official terminfos for their hardware
# (notably DEC and Wyse).
#
# A detailed change history is included at the end of this file.
#
# FILE ORGANIZATION:
#
# Comments in this file begin with # - they cannot appear in the middle
# of a terminfo/termcap entry. Individual capabilities are commented out by
# placing a period between the colon and the capability name.
#
# The file is divided up into major sections (headed by lines beginning with
# the string "########") and minor sections (beginning with "####"); do
#
# grep "^####" <file> | more
#
# to see a listing of section headings. The intent of the divisions is
# (a) to make it easier to find things, and (b) to order the database so
# that important and frequently-encountered terminal types are near the
# front (so that you'll get reasonable search efficiency even if you don't
# use reorder). Minor sections usually correspond to manufacturers or
# standard terminal classes. Parenthesized words following manufacturer
# names are type prefixes or product line names used by that manufacturers.
#
# HOW TO READ THE ENTRIES:
#
# The first name in an entry is the canonical name for the model or
# type, last entry is a verbose description. Others are mnemonic synonyms for
# the terminal.
#
# Terminal names look like <manufacturer> <model> - <modes/options>
# The part to the left of the dash, if a dash is present, describes the
# particular hardware of the terminal. The part to the right may be used
# for flags indicating special ROMs, extra memory, particular terminal modes,
# or user preferences.
#
# All names should be in lower case, for consistency in typing.
#
# The following are conventionally used suffixes:
# -2p Has two pages of memory. Likewise 4p, 8p, etc.
# -am Enable auto-margin.
# -m Monochrome. Suppress color support
# -mc Magic-cookie. Some terminals (notably older Wyses) can
# only support one attribute without magic-cookie lossage.
# Their base entry is usually paired with another that
# uses magic cookies to support multiple attributes.
# -na No arrow keys - termcap ignores arrow keys which are
# actually there on the terminal, so the user can use
# the arrow keys locally.
# -nam No auto-margin - suppress <am> capability
# -nl No labels - suppress soft labels
# -ns No status line - suppress status line
# -rv Terminal in reverse video mode (black on white)
# -s Enable status line.
# -vb Use visible bell (<flash>) rather than <bel>.
# -w Wide - in 132 column mode.
# If a name has multiple suffixes and one is a line height, that one should
# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv'.
#
# Entries with embedded plus signs are designed to be included through use/tc
# capabilities, not used as standalone entries.
#
# To avoid search clashes, some older all-numeric names for terminals have
# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
# All primary names of terminals now have alphanumeric prefixes.
#
# Comments marked "esr" are mostly results of applying the termcap-compiler
# code packaged with ncurses and contemplating the resulting error messages.
# In many cases, these indicated obvious fixes to syntax garbled by the
# composers. In a few cases, I was able to deduce corrected forms for garbled
# capabilities by looking at context. All the information in the original
# entries is preserved in the comments.
#
# In the comments, terminfo capability names are bracketed with <> (angle
# brackets). Termcap capability names are bracketed with :: (colons).
#
# INTERPRETATION OF USER CAPABILITIES
#
# The System V Release 4 and XPG4 terminfo format defines ten string
# capabilities for use by applications, <u0>...<u9>. In this file, we use
# certain of these capabilities to describe functions which are not covered
# by terminfo. The mapping is as follows:
#
# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
# u8 terminal answerback description
# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
#
# The terminal enquire string <u9> should elicit an answerback response
# from the terminal. Common values for <u9> will be ^E (on older ASCII
# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
#
# The cursor position request (<u7>) string should elicit a cursor position
# report. A typical value (for VT100 terminals) is \E[6n.
#
# The terminal answerback description (u8) must consist of an expected
# answerback string. The string may contain the following scanf(3)-like
# escapes:
#
# %c Accept any character
# %[...] Accept any number of characters in the given set
#
# The cursor position report (<u6>) string must contain two scanf(3)-style
# %d format elements. The first of these must correspond to the Y coordinate
# and the second to the %d. If the string contains the sequence %i, it is
# taken as an instruction to decrement each value after reading it (this is
# the inverse sense from the cup string). The typical CPR value is
# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
#
# These capabilities are used by tac(1m), the terminfo action checker soon
# to be distributed with ncurses.
#
# TABSET FILES
#
# All the entries in this file have been edited to assume that the tabset
# files directory is /usr/share/tabset, in conformance with the File Hierarchy
# Standard for Linux and free BSD systems. Some vendors (notably Sun) use
# /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
#
# No curses package we know of uses these files. If their location is an
# issue, you will have to hand-patch the file locations before compiling
# this file.
#
# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL:
#
# As the ANSI/ECMA-48 standard and variants take firmer hold, and as
# character-cell terminals are increasingly replaced by X displays, much of
# this file is becoming a historical document (this is part of the reason for
# the new organization, which puts ANSI types, xterm, free-Unix consoles,
# and vt100 up front in confidence that this will catch 95% of new hardware).
#
# For the terminal types still alive, I'd like to have manufacturer's
# contact data (Internet address and/or snail-mail + phone).
#
# I'm also interested in enriching the comments so that the latter portions of
# the file do in fact become a potted history of VDT technology as seen by
# UNIX hackers. Ideally, I'd like the headers for each manufacturer to
# include its live/dead/out-of-the-business status, and for as many
# terminal types as possible to be tagged with information like years
# of heaviest use, popularity, and interesting features.
#
# I'm especially interested in identifying the obscure entries listed under
# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
# wisdom about them gets lost. If you know a lot about obscure old terminals,
# please go to the terminfo resource page, grab the UFO file (ufo.ti), and
# eyeball it for things you can identify and describe.
#
# If you have been around long enough to contribute, please read the file
# with this in mind and send me your annotations.
#
# COPYRIGHTS AND OTHER DELUSIONS
#
# The BSD ancestor of this file had a standard Regents of the University of
# California copyright with dates from 1980 to 1993.
#
# Some information has been merged in from a terminfo file SCO distributes.
# It has an obnoxious boilerplate copyright which I'm ignoring because they
# took so much of the content from the ancestral BSD versions of this file
# and didn't attribute it, thereby violating the BSD Regents' copyright.
#
# Not that anyone should care. However many valid functions copyrights may
# serve, putting one on a termcap/terminfo file with hundreds of anonymous
# contributors makes about as much sense as copyrighting a wall-full of
# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
#
# This file deliberately has no copyright. It belongs to no one and everyone.
# If you claim you own it, you will merely succeed in looking like a fool.
# Use it as you like. Use it at your own risk. Copy and redistribute freely.
# There are no guarantees anywhere. Svaha!
#
######## STANDARD AND SPECIAL TYPES
#
# This section describes terminal classes and maker brands that are still
# quite common.
#
#### Specials
#
# Special "terminals". These are used to label tty lines when you don't
# know what kind of terminal is on it. The characteristics of an unknown
# terminal are the lowest common denominator - they look about like a ti 700.
#
dumb|80-column dumb tty,
am,
cols#80,
bel=^G, cr=^M, cud1=^J, ind=^J,
unknown|unknown terminal type,
gn, use=dumb,
lpr|printer|line printer,
hc, os,
cols#132, lines#66,
bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
glasstty|classic glass tty interpreting ASCII control characters,
am,
cols#80,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J,
#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
#
# See the end-of-file comment for more on these.
#
# The IBM PC alternate character set. Plug this into any Intel console entry.
# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
# ROM graphics for control characters such as the diamond, up- and down-arrow.
# This works with the System V, Linux, and BSDI consoles. It's a safe bet this
# will work with any Intel console, they all seem to have inherited \E[11m
# from the ANSI.SYS de-facto standard.
klone+acs|alternate character set for ansi.sys displays,
acsc=`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~q\304r\362s_t\303u\264v\301w\302x\263y\371z\372{\373|\374}\375~\376.\031-\030\,\021+^P0\333p\304r\304y\363z\362{\343|\330}\234,
rmacs=\E[10m, smacs=\E[11m,
# Highlight controls corresponding to the ANSI.SYS standard. Most
# console drivers for Intel boxes obey these. Makes the same assumption
# about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
klone+sgr|attribute control for ansi.sys displays,
blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m,
rmpch=\E[10m, rmso=\E[m, rmul=\E[m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
use=klone+acs,
# Highlight controls corresponding to the ANSI.SYS standard. *All*
# console drivers for Intel boxes obey these. Does not assume \E[11m will
# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
# diamond and arrow characters under curses.
klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
rmul=\E[m,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
use=klone+acs,
# KOI8 (RFC1489) alternate character set
# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
acsc=l\202m\204k\203j\205u\207t\206v\210w\211q\200x\201n\212o\213s\214p\216r\217`\004a\237f\234g\232~\225.\037-\036+\020\,\021h\222I\2200\215y\230z\231{\267}L|\274,
rmacs=\E[10m, smacs=\E[11m,
# ANSI.SYS color control. The setb/setf caps depend on the coincidence
# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
# but equivalent strings that don't rely on that coincidence:
# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
# They match a subset of ECMA-48.
klone+color|color control for ansi.sys and ISO6429-compatible displays,
colors#8, ncv#3, pairs#64,
op=\E[37;40m, setb=\E[4%p1%dm, setf=\E[3%p1%dm,
# This is better than klone+color, it doesn't assume white-on-black as the
# default color pair, but many `ANSI' terminals don't grok the <op> cap.
ecma+color|color control for ECMA-48-compatible terminals,
colors#8, ncv#3, pairs#64,
op=\E[39;49m, setb=\E[4%p1%dm, setf=\E[3%p1%dm,
# Attribute control for ECMA-48-compatible terminals
ecma+sgr|attribute capabilities for true ECMA-48 terminals,
rmso=\E[27m, rmul=\E[24m,
use=klone+sgr,
# For comparison, here are all the capabilities implied by the Intel
# Binary Compatibility Standard (level 2) that fit within terminfo.
# For more detail on this rather pathetic standard, see the comments
# near the end of this file.
ibcs2|Intel Binary Compatibility Standard prescriptions,
cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
#### ANSI/ECMA-48 terminals and terminal emulators
#
# See near the end of this file for details on ANSI conformance.
# Don't mess with these entries! Lots of other entries depend on them!
#
# This section lists entries in a least-capable to most-capable order.
# if you're in doubt about what `ANSI' matches yours, try them in that
# order and back off from the first that breaks.
ansi-mini|any ansi terminal with pessimistic assumptions,
am,
cols#80, it#8, lines#24,
clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
ht=^I,
# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
#
# The following is an entry for the full ANSI 3.64 (1977). It lacks
# padding, but most terminals using the standard are "fast" enough
# not to require any -- even at 9600 bps. If you encounter problems,
# try including the padding specifications.
#
# Note: the "as" and "ae" specifications are not implemented here, for
# the available termcap documentation does not make clear WHICH alternate
# character set to specify. ANSI 3.64 seems to make allowances for several.
# Please make the appropriate adjustments to fit your needs -- that is
# if you will be using alternate character sets.
#
# There are very few terminals running the full ANSI 3.64 standard,
# so I could only test this entry on one verified terminal (Visual 102).
# I would appreciate the results on other terminals sent to me.
#
# Please report comments, changes, and problems to:
#
# U.S. MAIL: Hugh Hansard
# Box: 22830
# Emory University
# Atlanta, GA. 30322.
#
# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
#
ansi77|ansi 3.64 standard 1977 version,
am, mir,
cols#80, it#8, lines#24,
bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, ri=\EM,
rmir=\E[4l, rmso=\E[m, rmul=\E[m, smir=\E[4h, smso=\E[7m,
smul=\E[4m,
# Procomm and some other ANSI emulations don't recognize all of the ANSI-
# standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
# <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
# 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
# to confuse many emulators. On the other hand, we can count on these programs
# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
# ANSI.SYS influence.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
am, mir, msgr,
cols#80, it#8, lines#24,
bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
use=klone+sgr-dumb,
pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
lines#25, use=pcansi-m,
pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
lines#33, use=pcansi-m,
pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
lines#43, use=pcansi-m,
# The color versions. All PC emulators do color...
pcansi|ibm-pc terminal programs claiming to be ansi,
use=klone+color, use=pcansi-m,
pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
lines#25, use=pcansi,
pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
lines#33, use=pcansi,
pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
lines#43, use=pcansi,
# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
# If you want pound signs rather than dollars, replace `B' with `A'
# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
mc5i,
cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g,
vpa=\E[%i%p1%dd, use=pcansi-m,
# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
# standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
ansi|ansi/pc-term compatible with color,
u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
u9=\E[c,
use=ecma+color, use=klone+sgr, use=ansi-m,
#
# ANSI.SYS entries
#
# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
# documentation (except for the keyboard key reassignment feature, which
# doen't fit the <pfkey> model well). The klone+acs sequences were valid
# though undocumented. The <pfkey> capability is untested but should work for
# keys F1-F10 (%p1 values outside this range will yield unpredictable results).
# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
am, mir, msgr, xon,
cols#80, lines#25,
clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u,
rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
u7=\E[6n,
use=klone+color, use=klone+sgr,
ansi.sys|ANSI.SYS 3.1 and later versions,
el=\E[K, use=ansi.sys-old,
#
# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
# This should only be used when the terminal emulator cannot redefine the keys.
# Since redefining keys with ansi.sys also affects PC-DOS programs, the key
# definitions must be restored. If the terminal emulator is quit while in vi
# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
# Note that <kcub1> is always BS, because PC-dos can tolerate this change.
# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
# Consequently the End keypad key could not be set (it is relatively safe and
# actually useful because it sends ^@ O, which beeps and opens a line above).
ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
use=ansi.sys,
#
# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, use=ansi.sys,
#
# See ansi.sysk and nansi.sys above.
nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
use=ansi.sysk,
# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
ansi-nt|psx_ansi|Windows NT POSIX console,
am, bw, msgr,
cols#80, it#8, lines#25,
bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
#### ANSI console types
#
# This entry is good for the 1.2.13 version of the Linux console driver.
#
# Note: there are numerous broken linux entries out there, which didn't screw
# up BSD termcap but hose ncurses's smarter cursor-movement optimization.
# One common pathology is an incorrect tab length of 4.
#
# ***************************************************************************
# * *
# * WARNING: *
# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
# * character. Here are the keymap replacement lines that will set this up: *
# * *
# keycode 15 = Tab Tab
# alt keycode 15 = Meta_Tab
# shift keycode 15 = F26
# string F26 ="\033[Z"
# * *
# * This has to use a key slot which is unfortunate (any unused one will *
# # do, F26 is the higher-numbered one). The change ought to be built *
# * into the kernel tables. *
# * *
# ***************************************************************************
#
# The 1.3.x kernels add color-change capabilities; if yours doesn't have this
# and it matters, turn off <ccc>. The %02x escape used to implement this is
# not back-portable to SV curses and not supported in ncurses versions before
# 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
# themselves; this entry assumes that capability.
#
# From: Eric S. Raymond <esr@snark.thyrsus.com> 15 Dec 1995
linux|linux console,
am, bce, eo, mir, msgr, xenl, xon,
it#8,
bel=^G, civis=\E[?25l, clear=\E[H\E[J, cnorm=\E[?25h,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m,
rmul=\E[24m, rs1=\Ec, sc=\E7,
sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
smir=\E[4h, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
u7=\E[6n, u8=\E[?6c, u9=\E[c, vpa=\E[%i%p1%dd,
use=klone+sgr, use=ecma+color,
linux-m|Linux console no color,
colors@, pairs@,
setab@, setaf@, setb@, setf@, use=linux,
linux-c-nc|linux console 1.3.x hack for ncurses only,
ccc,
initc=\E]P%p1%x%p2%02x%p3%02x%p4%02x, oc=\E]R, use=linux,
# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
linux-c|linux console 1.3.6+, with private palette for each virtual console,
ccc,
colors#8, pairs#64,
initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%p'a'%+%c%e%p1%d%p2%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p3%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p4%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;,
oc=\E]R,
use=linux,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
linux-nic|linux with ich/ich1 suppressed for non-curses programs,
ich@, ich1@,
use=linux,
# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
linux-koi8|linux with koi8 alternate character set,
use=linux, use=klone+koi8acs,
# SCO console and SOS-Syscons console for 386bsd
# (scoansi: had unknown capabilities
# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
# on the <smacs>=\E[12m -- esr)
scoansi|SCO Extended ANSI standard crt,
am, eo, xon,
cols#80, it#8, lines#25,
blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf1=\E[M,
kf10=\E[V, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R,
kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
ri=\E[T,
use=klone+sgr-dumb,
# This actually describes the generic SVr4 display driver for Intel boxes.
# The <dim=\E[2m> isn't documented and therefore may not be reliable.
# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
att6386|at386|386at|AT&T WGS 6386 console,
am, bw, eo, xon,
cols#80, it#8, lines#25,
acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
sc=\E7,
sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
tbc=\E[2g, vpa=\E[%i%p1%dd,
use=klone+color,
# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
pc6300plus|AT&T 6300 plus,
am, xon,
cols#80, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smso=\E[7m, smul=\E[4m, tbc=\E[3g,
#
# Terminfo entry for the AT&T Unix PC 7300
# from escape(7) in Unix PC 7300 Manual.
# Somewhat similar to a vt100-am (but different enough
# to redo this from scratch.)
#
# /***************************************************************
# *
# * FONT LOADING PROGRAM FOR THE UNIX PC
# *
# * This routine loads a font defined in the file ALTFONT
# * into font memory slot #1. Once the font has been loaded,
# * it can be used as an alternative character set.
# *
# * The call to ioctl with the argument WIOCLFONT is the key
# * to this routine. For more information, see window(7) in
# * the PC 7300 documentation.
# ***************************************************************/
# #include <string.h> /* needed for strcpy call */
# #include <sys/window.h> /* needed for ioctl call */
# #define FNSIZE 60 /* font name size */
# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
# /*
# * The file /usr/lib/wfont/special.8.ft comes with the
# * standard PC software. It defines a graphics character set
# * similar to that of the Teletype 5425 terminal. To view
# * this or other fonts in /usr/lib/wfont, use the command
# * cfont <filename>. For further information on fonts see
# * cfont(1) in the PC 7300 documentation.
# */
#
# struct altfdata /* structure for alt font data */
# {
# short altf_slot; /* memory slot number */
# char altf_name[FNSIZE]; /* font name (file name) */
# };
# ldfont()
# {
# int wd; /* window in which altfont will be */
# struct altfdata altf;
# altf.altf_slot=1;
# strcpy(altf.altf_name,ALTFONT);
# for (wd =1; wd < 12; wd++) {
# ioctl(wd, WIOCLFONT,&altf);
# }
# }
#
# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
# they're confirmed by the man page for the System V display---esr)
#
att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
am, xenl, xon,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[7m, cbt=\E^I, civis=\E[=C, clear=\E[2J\E[H,
cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD, cud=\E[%p1%dB,
cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
ind=^J, invis=\E[9m, is1=^O, kBEG=\EBG, kCAN=\ECN, kCPY=\ECP,
kCRT=\ECR, kDC=\EDC, kDL=\EDL, kEND=\EEN, kEOL=\ECI,
kFND=\EFI, kHLP=\EHL, kHOM=\EHM, kIC=\ENJ, kLFT=\EBW,
kMOV=\EMV, kNXT=\ENX, kOPT=\EOT, kPRV=\EPV, kRDO=\ERO,
kRIT=\EFW, kRPL=\ERP, kSAV=\ESV, kUND=\EUD, kbeg=\Ebg,
kbs=^H, kcan=\Ecn, kcbt=\E^I, kclo=\Ecl, kclr=\Ece,
kcmd=\Ecm, kcpy=\Ecp, kcrt=\Ecr, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\Edc, ked=\Ece, kel=\Eci,
kend=\Een, kext=\Eex, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kfnd=\Efi, khlp=\Ehl,
khome=\Ehm, kich1=\Eim, kind=\Erd, kmov=\Emv, kmrk=\Emk,
knp=\Epg, knxt=\Enx, kopn=\Eop, kopt=\Eot, kpp=\EPG,
kprt=\Epr, kprv=\Epv, krdo=\Ero, kref=\Ere, krfr=\Erf,
kri=\Eru, krpl=\Erp, krst=\Ers, ksav=\Esv, kslt=\Esl,
kund=\Eud, nel=\EE, rev=\E[7m, ri=\EM, rmacs=\E[10m,
rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smacs=\E[11m,
smso=\E[7m, smul=\E[4m,
# From: davis@unidata.ucar.edu
# (iris-ansi: added rmam/smam based on init string -- esr)
iris-ansi|iris-ansi-net|IRIS emulating ANSI terminal,
am,
cols#80, it#8, lines#40,
bel=^G, bold=\E[1m, clear=\E[H\E[2J,
cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\EOQ, kf11=\EOR,
kf12=\EOS, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
kf9=\EOP, khome=\E[H, kich1=\E[139q, knp=\E[154q,
kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, kspd=\E[217q,
nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, rc=\E8,
rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7,
sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
tbc=\E[3g,
iris-ansi-ap|IRIS ANSI in application-keypad mode,
is2=\E[?1l\E>\E[?7h, kf10=\E[010q, kf11=\E[011q,
kf12=\E[012q, rmkx=\E>, smkx=\E=,
use=iris-ansi,
# The following is a version of the ibm-pc entry distributed with PC/IX,
# (Interactive Systems' System 3 for the Big Blue), modified by Richard
# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
# (the former is untrue, and the latter failed under UCB/man); standout and
# underline modes have been added. Note: this entry describes the "native"
# capabilities of the PC monochrome display, without ANY emulation; most
# communications packages (but NOT PC/IX connect) do some kind of emulation.
pcix|PC/IX console,
am, bw, eo,
cols#80, lines#24,
clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
smul=\E[4m,
# (ibmpcx: this entry used to be known as ibmx.
# It formerly included the following extension capabilities:
# :GC=b:GL=v:GR=t:RT=^J:\
# :GH=\E[196g:GV=\E[179g:\
# :GU=\E[193g:GD=\E[194g:\
# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
# what was there before. -- esr)
ibmpcx|xenix|ibmx|IBM PC xenix console display,
am, msgr,
cols#80, lines#25,
clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
kpp=\E[Z,
use=klone+acs, use=klone+sgr,
# QNX 4.0 Console
# Michael's original version of this entry had <am@>, <smcup=\Ei>,
# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
# right corner without triggering a scroll. The ncurses terminfo library can
# handle this case with the <ich1> capability, and prefers <am> for better
# optimization. Bug: The <op> capability resets attributes.
# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
qnx|qnx4|qnx console,
daisy, km, mir, msgr, xhpa, xt,
colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
acsc=l\332m\300k\277j\331q\304x\263u\264t\303n\305v\301w\302O\333a\261o\337s\334,
bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, cvvis=\Ey2,
dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
kDL=\377\366, kEND=\377\301, kEOL=\377\311,
kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
kUND=\377\337, kbeg=\377\300, kcan=\377\243,
kcbt=\377\200, kclo=\377\343, kclr=\377\341,
kcmd=\377\245, kcpy=\377\265, kcrt=\377\305,
kctab=\377\237, kcub1=\377\244, kcud1=\377\251,
kcuf1=\377\246, kcuu1=\377\241, kdch1=\377\254,
kdl1=\377\274, ked=\377\314, kel=\377\310, kend=\377\250,
kent=\377\320, kext=\377\270, kf1=\377\201,
kf10=\377\212, kf11=\377\256, kf12=\377\257,
kf13=\377\213, kf14=\377\214, kf15=\377\215,
kf16=\377\216, kf17=\377\217, kf18=\377\220,
kf19=\377\221, kf2=\377\202, kf20=\377\222,
kf21=\377\223, kf22=\377\224, kf23=\377\333,
kf24=\377\334, kf25=\377\225, kf26=\377\226,
kf27=\377\227, kf28=\377\230, kf29=\377\231,
kf3=\377\203, kf30=\377\232, kf31=\377\233,
kf32=\377\234, kf33=\377\235, kf34=\377\236,
kf35=\377\276, kf36=\377\277, kf37=\377\321,
kf38=\377\322, kf39=\377\323, kf4=\377\204,
kf40=\377\324, kf41=\377\325, kf42=\377\326,
kf43=\377\327, kf44=\377\330, kf45=\377\331,
kf46=\377\332, kf47=\377\316, kf48=\377\317,
kf5=\377\205, kf6=\377\206, kf7=\377\207, kf8=\377\210,
kf9=\377\211, kfnd=\377\346, khlp=\377\350,
khome=\377\240, khts=\377\342, kich1=\377\253,
kil1=\377\273, kind=\377\261, kmov=\377\351,
kmrk=\377\355, kmsg=\377\345, knp=\377\252,
knxt=\377\312, kopn=\377\357, kopt=\377\353,
kpp=\377\242, kprt=\377\255, kprv=\377\302,
krdo=\377\336, kref=\377\354, kres=\377\360,
krfr=\377\347, kri=\377\271, krmir=\377\313,
krpl=\377\362, krst=\377\352, ksav=\377\361,
kslt=\377\247, kspd=\377\335, ktbc=\377\344,
kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
rep=\Eg%p2%' '%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
setf=\E@%p1%Pf%gb%gf%d%d,
sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,
sgr0=\E}\E]\E>\E), smcup=\Ei, smso=\E(, smul=\E[,
#### NetBSD consoles
#
# pcvt termcap database entries (corresponding to release 3.31)
# Author's last edit-date: [Fri Sep 15 20:29:10 1995]
#
# (For the terminfo master file, I translated these into terminfo syntax.
# Then I dropped all the pseudo-HP entries. we don't want and can't use
# the :Xs: flag. Then I split :is: into a size-independent <is1> and a
# size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
# NOTE: because the 386BSD "vi"/"elvis" seems to have a bug if
# both <ich1> and <smir> are specified (an original VT220
# shows the same buggy behaviour!), <ich1> has been taken
# out of this entry. for reference, it should be <ich1=\E[@>.
pcvtXX|pcvt vt200 emulator (DEC VT220),
am, km, mir, msgr, xenl,
it#8, vt#3,
acsc=llmmkkjjuuttvvwwqqxxnnoosspprr``aaffgg~~..--++\,\,hhII00yyzz,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
# 50 lines entries; 80 columns
pcvt25|dec vt220 emulation with 25 lines,
cols#80, lines#25,
is2=\E[1;25r\E[25;1H, use=pcvtXX,
pcvt28|dec vt220 emulation with 28 lines,
cols#80, lines#28,
is2=\E[1;28r\E[28;1H, use=pcvtXX,
pcvt35|dec vt220 emulation with 35 lines,
cols#80, lines#35,
is2=\E[1;35r\E[35;1H, use=pcvtXX,
pcvt40|dec vt220 emulation with 40 lines,
cols#80, lines#40,
is2=\E[1;40r\E[40;1H, use=pcvtXX,
pcvt43|dec vt220 emulation with 43 lines,
cols#80, lines#43,
is2=\E[1;43r\E[43;1H, use=pcvtXX,
pcvt50|dec vt220 emulation with 50 lines,
cols#80, lines#50,
is2=\E[1;50r\E[50;1H, use=pcvtXX,
# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
# 50 lines entries; 132 columns
pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
cols#132, lines#25,
is2=\E[1;25r\E[25;1H, use=pcvtXX,
pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
cols#132, lines#28,
is2=\E[1;28r\E[28;1H, use=pcvtXX,
pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
cols#132, lines#35,
is2=\E[1;35r\E[35;1H, use=pcvtXX,
pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
cols#132, lines#40,
is2=\E[1;40r\E[40;1H, use=pcvtXX,
pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
cols#132, lines#43,
is2=\E[1;43r\E[43;1H, use=pcvtXX,
pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
cols#132, lines#50,
is2=\E[1;50r\E[50;1H, use=pcvtXX,
# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
# manufactured by Sharp for the Japenese market.
# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
x68k|x68k-ite|NetBSD/x68k ITE,
cols#96, lines#32,
kclr=\E[9~, khlp=\E[28~, use=vt220,
#### FreeBSD console entries
#
# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
# Andrey Chernov maintains the FreeBSD termcap distributions.
#
# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
# or comment out the :cb: capability in the console entry.
#
# Alexander Lukyanov reports:
# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
# Now el1 clears not only to the line beginning, but also a large chunk
# of previous line. But there is another bug - ech does not work at all.
#
# for syscons
# common entry without semigraphics
# Bug: The <op> capability resets attributes.
cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
am, bce, bw, eo, msgr, npc,
colors#8, cols#80, it#8, lines#25, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[30;1m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX,
ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, hpa=\E[%i%p1%d`,
ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
ind=\E[S, indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X,
kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G,
kpp=\E[I, nel=\E[E, op=\E[x, rev=\E[7m, ri=\E[T,
rin=\E[%p1%dT, rmso=\E[m, rs1=\E[x\E[m\Ec,
setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m,
vpa=\E[%i%p1%dd,
cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
acsc=l\332m\300k\277j\331u\264t\303v\301w\302q\304x\263n\305`\004a\260f\370g\361~\371.\031-\030h\261I^U0\333y\363z\362,
use=cons25w,
cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
colors@, pairs@,
bold@, dim@, op@, rmul=\E[m, setb@, setf@, smul=\E[4m, use=cons25,
cons30|ansi80x30|freebsd console (30-line ansi mode),
lines#30, use=cons25,
cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
lines#30, use=cons25-m,
cons43|ansi80x43|freebsd console (43-line ansi mode),
lines#43, use=cons25,
cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
lines#43, use=cons25-m,
cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
lines#50, use=cons25,
cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
lines#50, use=cons25-m,
cons60|ansi80x60|freebsd console (60-line ansi mode),
lines#60, use=cons25,
cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
lines#60, use=cons25-m,
cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
acsc=q\200x\201m\204v\211j\205t\206n\212u\207l\202w\210k\203y\230z\231f\234~\225a\220h\221`\004.\031-\030I^U0\215,
use=cons25w,
cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
colors@, pairs@,
op@, rmul=\E[m, setb@, setf@, smul=\E[4m, use=cons25r,
cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
lines#50, use=cons25r,
cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
lines#50, use=cons25r-m,
cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
lines#60, use=cons25r,
cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
lines#60, use=cons25r-m,
# ISO 8859-1 FreeBSD console
cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
acsc=l\215m\216k\214j\213u\226t\225v\227w\230q\222x\231n\217o\220s\224p\221r\223`\201a\202f\207g\210~\237.\031-\030+\253\,\273I\247y\232z\233,
use=cons25w,
cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
colors@, pairs@,
bold@, dim@, op@, rmul=\E[m, setb@, setf@, smul=\E[4m, use=cons25l1,
cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
lines#50, use=cons25l1,
cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
lines#50, use=cons25l1-m,
cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
lines#60, use=cons25l1,
cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
lines#60, use=cons25l1-m,
#### 386BSD and BSD/OS Consoles
#
# This was the original 386BSD console entry (I think).
# Some places it's named oldpc3|oldibmpc3.
# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
origpc3|origibmpc3|IBM PC 386BSD Console,
am, bw, eo, xon,
cols#80, lines#25,
acsc=l\332q\304k\277x\263j\331m\300w\302u\264v\301t\303n\305,
bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
# description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
km,
lines#25,
bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
# Note, the emulator supports many of the additional console features
# listed in the iBCS2 (e.g. character-set selection) though not all
# are described here. This entry really ought to be upgraded.
# Also note, the console will also work with fewer lines after doing
# "stty rows NN", e.g. to use 24 lines.
# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
# Bug: The <op> capability resets attributes.
bsdos|BSD/OS console,
am, bw, eo, km, xon,
colors#8, cols#80, it#8, lines#25, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[=8F, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, knp=\E[G,
kpp=\E[I, nel=^M^J, op=\E[x, rc=\E8, rev=\E[7m, rmso=\E[0m,
sc=\E7, setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[0m,
smso=\E[7m,
bsdos-bold|IBM PC BSD/386 Console with bold instead of underline,
rmul=\E[0m, smul=\E[1m,
use=bsdos,
# If you are BSDI, you want the following entries, for the moment.
# In release 2.0 they will probably phase out the pc3 and ibmpc3 names
pc3|IBM PC BSD/386 Console,
use=bsdos,
ibmpc3|pc3-bold|IBM PC BSD/386 Console with bold instead of underline,
smul=\E[1m,
use=bsdos-bold,
#### DEC VT100 and compatibles
#
# DEC terminals from the vt100 forward (and the vt52, way obsolete but still
# the basis of some emulations) are collected here. Older DEC terminals and
# micro consoles can be found in the `obsolete' section. More details on
# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
# found near the end of this file.
#
# Except where noted, these entries are DEC's official terminfos.
# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
# Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
# In October 1995 DEC sold its terminals business, including the VT and Dorio
# line and trademark, to SunRiver Data Systems. SunRiver has since changed
# its name to Boundless Technologies; see http://www.boundless.com.
#
# (The <acsc>, <rmacs>, and <smacs> capabilities aren't in DEC's official
# entry -- esr)
vt52|dec vt52,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
# NOTE: Any VT100 emulation, whether in hardware or software, almost
# certainly includes what DEC called the `Level 1 editing extension' codes;
# only the very oldest VT100s lacked these and there probably aren't any of
# those left alive. To capture these, use one of the VT102 entries.
#
# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
# since the cursor is left in a different position while in the
# weird state (concept at beginning of next line, vt100 at end
# of this line) so all versions of vi before 3.7 don't handle
# <xenl> right on vt100. The correct way to handle <xenl> is when
# you output the char in column 80, immediately output CR LF
# and then assume you are in column 1 of the next line. If <xenl>
# is on, am should be on too.
#
# I assume you have smooth scroll off or are at a slow enough baud
# rate that it doesn't matter (1200? or less). Also this assumes
# that you set auto-nl to "on", if you set it off use vt100-nam
# below.
#
# The padding requirements listed here are guesses. It is strongly
# recommended that xon/xoff be enabled, as this is assumed here.
#
# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
# tab settings are in non-volatile memory and don't need to be
# reset upon login. Also setting the number of columns glitches
# the screen annoyingly. You can type "reset" to get them set.
#
# Here's a diagram of the VT100 keypad keys with their bindings.
# The top line is the name of the key (some DEC keyboards have the keys
# labelled somewhat differently, like GOLD instead of PF1, but this is
# the most "official" name). The second line is the escape sequence it
# generates in Application Keypad mode (where "$" means the ESC
# character). The third line contains two items, first the mapping of
# the key in terminfo, and then in termcap.
# _______________________________________
# | PF1 | PF2 | PF3 | PF4 |
# | $OP | $OQ | $OR | $OS |
# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
# | 7 8 9 - |
# | $Ow | $Ox | $Oy | $Om |
# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
# | 4 | 5 | 6 | , |
# | $Ot | $Ou | $Ov | $Ol |
# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
# | 1 | 2 | 3 | |
# | $Oq | $Or | $Os | enter |
# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
# | 0 | . | |
# | $Op | $On | |
# |___kc1_______K4____|_kc3__K5_|_kent_@8_|
#
# And here, for those of you with orphaned VT100s lacking documentation, is
# a description of the soft switches invoked when you do `Set Up'.
#
# Scroll 0-Jump Shifted 3 0-#
# | 1-Smooth | 1-British pound sign
# | Autorepeat 0-Off | Wrap Around 0-Off
# | | 1-On | | 1-On
# | | Screen 0-Dark Bkg | | New Line 0-Off
# | | | 1-Light Bkg | | | 1-On
# | | | Cursor 0-Underline | | | Interlace 0-Off
# | | | | 1-Block | | | | 1-On
# | | | | | | | |
# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
# | | | | | | | |
# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
# | | | 1-On | | | 1-50 Hz
# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
# | | 1-ANSI | | 1-8 Bits
# | Keyclick 0-Off | Parity 0-Off
# | 1-On | 1-On
# Margin Bell 0-Off Parity Sense 0-Odd
# 1-On 1-Even
#
# The following SET-UP modes are assumed for normal operation:
# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
# WRAP_AROUND_ON JUMP_SCROLL_OFF
# Other SET-UP modes may be set for operator convenience or communication
# requirements; I recommend
# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
# Unless you have a graphics add-on such as Digital Engineering's VT640
# (and even then, whenever it can be arranged!) you should set
# INTERLACE_OFF
#
# (I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
vt100|vt100-am|dec vt100 (w/advanced video),
am, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, ka1=\EOq,
ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy,
kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
vt100nam|vt100-nam|vt100 no automargins,
am@, xenl@, use=vt100-am,
# Ordinary vt100 in 132 column ("wide") mode.
vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
cols#132, lines#24,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
cols#132, lines#14, vt@,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
# vt100 with no advanced video.
vt100-nav|vt100 without advanced video option,
xmc#1,
blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
smul@,
use=vt100,
vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
cols#132, lines#14, use=vt100-nav,
# vt100 with one of the 24 lines used as a status line.
# We put the status line on the top.
vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
eslok, hs,
lines#23,
clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
# Status line at bottom.
# Clearing the screen will clobber status line.
vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
eslok, hs,
lines#23,
dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
tsl=\E7\E[24;%p1%dH\E[1K,
use=vt100-am,
# Most of the `vt100' emulators out there actually emulate a vt102
# This entry (or vt102-nsgr) is probably the right thing to use for
# these.
vt102|dec vt102,
mir,
dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, use=vt100,
vt102-w|dec vt102 in wide mode,
lines#132,
rs3=\E[?3h, use=vt102,
# Many brain-dead PC comm programs that pretend to be `vt100-compatible'
# fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
# string in the canonical vt100 entry above leaves the screen littered
# with little snowflake or star characters (IBM PC ROM character \017 = ^O)
# after highlight turnoffs. This entry should fix that, and even leave
# ACS support working, at the cost of making multiple-highlight changes
# slightly more expensive.
# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
sgr@, sgr0=\E[m,
use=vt102,
# VT125 Graphics CRT. Clear screen also erases graphics
vt125|vt125 graphics terminal,
clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
# This isn't a DEC entry, it came from University of Wisconsin.
# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
vt131|dec vt131,
am, xenl,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
rmul=\E[m$<2/>,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2/>, smul=\E[4m$<2/>,
# vt132 - like vt100 but slower and has ins/del line and such.
# I'm told that <smir>/<rmir> are backwards in the terminal from the
# manual and from the ANSI standard, this describes the actual
# terminal. I've never actually used a vt132 myself, so this
# is untested.
#
vt132|DEC vt132,
xenl,
dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
ip=$<7>, rmir=\E[4h, smir=\E[4l,
use=vt100,
# vt220:
# This vt220 description maps F5--F9 to the second block of function keys
# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
# PF1--PF4 are used as F1--F4.
#
vt220|vt200|DEC VT220 in vt100 emulation mode,
am, mir, xenl, xon,
cols#80, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
is2=\E[1;24r\E[24;1H, kbs=\177, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmso=\E[27m, rmul=\E[24m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
vt220-w|vt200-w|DEC vt220 in wide mode,
cols#132,
rs3=\E[?3h, use=vt220,
#
# vt220d:
# This vt220 description regards F6--F10 as the second block of function keys
# at the top of the keyboard. This mapping follows the description given
# in the VT220 Programmer Reference Manual and agrees with the labeling
# on some terminals that emulate the vt220. There is no support for an F5.
# See vt220 for an alternate mapping.
#
vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
use=vt220,
vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
am@,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
vt220-8|dec vt220 8 bit terminal,
am, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=\177, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~,
kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i,
mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# This was DEC's vt320. Use the purpose-built one below instead
#vt320|DEC VT320 in vt100 emulation mode,
# use=vt220,
#
# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
#
vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
am@,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
# These entries are not DEC's official ones, they were purpose-built for the
# VT320. Here are the designer's notes:
# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
# 'Erase to End of Field'... since nothing seems to use 'end' anyways...
# khome is Home on a PC kbd. Actually 'FIND' on a VT.
# Things that use <knxt> usually use tab anyways... and things that don't use
# tab usually use <knxt> instead...
# kprv is same as tab - Backtab is useless...
# I left out <sgr> because of its RIDICULOUS complexity,
# and the resulting fact that it causes the termcap translation of the entry
# to SMASH the 1k-barrier...
# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995
# (vt320: uncommented <fsl> --esr)
vt320|vt300|dec vt320 7 bit terminal,
am, eslok, hs, mir, msgr, xenl,
cols#80, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
il1=\E[L, ind=\ED,
is2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=\177, kc1=\EOq, kc3=\EOs,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kel=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, kpp=\E[5~,
kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300,
ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[1$}\E[H\E[K,
vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
am@,
is2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
use=vt320,
# We have to init 132-col mode, not 80-col mode.
vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
cols#132, wsl#132,
is2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
use=vt320,
vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
am@,
is2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
use=vt320-w,
# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
# which are pretty much a superset of the VT320. They have the
# host writable status line, yet another different DRCS matrix size,
# and such, but they add the DEC Technical character set, Multiple text
# pages, selectable length pages, and the like. The difference between
# the vt330 and vt340 is that the latter has only 2 planes and a monochrome
# monitor, the former has 4 planes and a color monitor. These terminals
# support VT131 and ANSI block mode, but as with much of these things,
# termcap/terminfo doesn't deal with these features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
# arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap or terminfo entry,
#
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt340: string capability "sb=\E[M" corrected to "sr";
# also, added <rmam>/<smam> based on the init string -- esr)
vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dch=\E[%p1%dP,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, ht=^I,
hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
# DEC doesn't supply a vt400 description, so we add Daniel Glasser's
# (originally written with vt420 as its primary name, and usable for it).
#
# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
# text pages and long text pages with selectable length of the vt340, along
# with left and right margins, rectangular area text copy, fill, and erase
# operations, selected region character attribute change operations,
# page memory and rectangle checksums, insert/delete column, reception
# macros, and other features too numerous to remember right now. TERMCAP
# can only take advantage of a few of these added features.
#
# Note that this entry is are set up in what was the standard way for GNU
# Emacs v18 terminal modes to deal with the cursor keys in that the arrow
# keys were switched into application mode at the same time the numeric pad
# is switched into application mode. This changes the definitions of the
# arrow keys. Emacs v19 is smarter and mines its keys directly out of
# your termcap entry,
#
# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
# also, added <rmam>/<smam> based on the init string -- esr)
vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, sgr0=\E[m,
smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[2$~\E[1$}\E[1;%dH,
# (vt420: I removed <kf0>, it collided with <kf10>. I also restored
# a missing <sc> -- esr)
vt420|DEC VT420,
am, mir, xenl, xon,
cols#80, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smkx=\E=, smso=\E[7m, smul=\E[4m,
#
# DECUDK
# if (key < 16) then value = key;
# else if (key < 21) then value = key + 1;
# else if (key < 25) then value = key + 2;
# else if (key < 27) then value = key + 3;
# else if (key < 30) then value = key + 4;
# else value = key + 5;
#
vt420pc|DEC VT420 w/PC keyboard,
kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[H,
pctrm=USR_TERM\:vt420pcdos\:,
pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, use=vt420,
vt420pcdos|DEC VT420 w/PC for DOS Merge,
lines#25,
dispc=%?%p2%{19}%=%t\E\023\021%e%p2%{32}%<%t\E%p2%c%e%p2%{127}%=%t\E\177%e%p2%c%;,
pctrm@,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
sgr0=\E[m, smsc=\E[?1;2r\E[34h,
use=vt420pc,
vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
use=vt420,
vt510|DEC VT510,
use=vt420,
vt510pc|DEC VT510 w/PC keyboard,
use=vt420pc,
vt510pcdos|DEC VT510 w/PC for DOS Merge,
use=vt420pcdos,
# VT520/VT525
#
# The VT520 is a monochrome text terminal capable of managing up to
# four independent sessions in the terminal. It has multiple ANSI
# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
#
# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
# [Alt]/[Print Screen] depending upon which keyboard and which
# terminal mode is being used. If Set-Up has been disabled or
# assigned to an unknown key, Set-Up may be entered by pressing
# [F3] as the first key after power up, regardless of keyboard type.
# (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
vt520|DEC VT520,
am, mir, xenl, xon,
cols#80, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf0=\E[29~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~,
kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kslt=\E[4~,
pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
# (vt525: I added <rmam>/<smam> based on the init string;
# removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
vt525|DEC VT525,
am, mir, xenl, xon,
cols#80, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf0=\E[29~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~,
kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kslt=\E[4~,
pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
#### VT100 emulations
#
# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
# (the best Windows telnet as of September 1995) presents the name `dec-vt100'
# to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
# that this works best with a stock vt100 entry.
dec-vt100|EWAN telnet's vt100 emulation,
use=vt100,
# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
dec-vt220|DOS tnvt200 terminal emulator,
am@, use=vt220,
# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
# anyone who needs PC VT340 emulation. (or anything below that level, for
# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
# RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
# I can send the address if requested.
# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995
z340|zstem vt340 terminal emulator 132col 42line,
lines#42,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
use=vt320-w,
z340-nam|zstem vt340 terminal emulator 132col 42line,
am@,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
use=z340,
#### X terminal emulators
#
# You can add the following line to your .Xdefaults to change the terminal type
# set by the xterms you start up to my-xterm:
#
# *termName: my-xterm
#
# System administrators can change the default entry for xterm instances
# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
# case, xterm will detect and reject an invalid terminal type, falling back
# to the default of xterm.
#
# X10/6.6 11/7/86, minus alternate screen, plus (csr)
# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
# as these seem not to work -- esr)
x10term|vs100-x10|xterm terminal emulator (X10 window system),
am, km, mir, msgr, xenl, xon,
cols#80, it#8, lines#65,
bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
smso=\E[7m, smul=\E[4m,
# Compatible with the R5 xterm
# (from the XFree86 3.2 distribution, <blink=@> removed)
xterm-r5|xterm R5 version,
am, km, msgr, xenl,
cols#80, it#8, lines#24,
bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
kdl1=\E[31~, kel=\E[8~, kf0=\EOq, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, khome=\E[7~, kich1=\E[2~, kil1=\E[30~,
knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
rmkx=\E[?1l\E>, rmso=\E[m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, sc=\E7,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, tbc=\E[3g,
# Compatible with the R6 xterm
# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
xterm-r6|xterm-old|xterm X11R6 version,
am, km, mir, msgr, xenl,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, enacs=\E)0, home=\E[H, ht=^I, il=\E[%p1%dL,
il1=\E[L, ind=^J,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
rmso=\E[m, rmul=\E[m,
rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7,
sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# This is the stock xterm entry supplied with XFree86 3.2
# The name has been changed and some aliases have been removed.
xterm-xf86-v32|xterm terminal emulator (X Window System),
am, bce, km, mir, msgr, xenl,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J,
cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dch=\E[%p1%dP,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
ka1=\EOw, ka3=\EOu, kb2=\EOy, kbeg=\EOE, kbs=^H, kc1=\EOq,
kc3=\EOs, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\177, kend=\EOF, kent=\EOM, kf1=\E[11~, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=^O,
rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, vpa=\E[%i%p1%dd,
# This is xterm for ncurses. It mainly adds mappings for more high-half
# characters. Note that these will only work for fixed-width fonts.
# Once XFree86 3.2 is established, we'll switch this to use=xterm-xf86-v32
xterm|vs100|xterms|xterm terminal emulator (X Window System),
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++\,\,II00,
u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
use=xterm-r6,
# These entries allow access to the X titlebar and icon name as a status line.
# Note that twm (and possibly window managers descended from it such as tvtwm,
# ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
# with it.
xterm+sl|access X title line and icon name,
hs,
wsl#40,
dsl=\E]0;\007, fsl=^G, tsl=\E]0;,
xterm+sl-twm|access X title line (pacify twm-descended window managers),
hs,
wsl#40,
dsl=\E]2;\007, fsl=^G, tsl=\E]2;,
#
# The following xterm variants don't depend on your base version
#
xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
smso=\E[1m,
use=xterm,
# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
# (kterm should not invoke DEC Graphics as the alternate character set
# -- Kenji Rikitake)
kterm|kterm kanji terminal emulator (X window system),
eslok, hs,
csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=\E(B, fsl=\E[?F,
rc=\E8, sc=\E7, tsl=\E[?E\E[?%i%dT,
use=xterm,
# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
ich@, ich1@,
use=xterm,
# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
xterm1|xterm terminal emulator ignoring the alternate screen buffer,
rmcup@, smcup@,
use=xterm,
# This describes the capabilities of color_xterm, an xterm variant from
# before ECMA-64 color support was folded into the main-line xterm release.
# This entry is straight from color_xterm's maintainer.
# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
color_xterm|cx|cx100|color_xterm color terminal emulator for X,
am, km, mir, msgr, xenl,
colors#8, cols#80, it#8, lines#65, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, ka1=\EOw, ka3=\EOy,
kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kent=\EOM, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
kmous=\E[M, knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8,
rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
rmcup=\E>\E[?41;1r, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m, smacs=^N, smam=\E[?7h,
smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
smul=\E[4m,
# From: Mark Olesen & Thomas Dickey <dickey@clark.net> 13 Jul 1996
rxvt|reduced xterm terminal (X Window System),
am, bce, km, mir, msgr, xenl, xon,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l,
is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$,
kPRV=\E[5$, kRIT=\E[c, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H,
kc1=\EOp, kc3=\EOn, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[8~, kent=\EOM,
kf0=\E[21~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[7~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
op=\E[39m\E[49m, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=\E(B\E)0\017, rmcup=\E[?47l\E8, rmir=\E[4l,
rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
sc=\E7, setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m,
smacs=\E(B\E)U\016, smcup=\E7\E[?47h, smir=\E[4h,
smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%i%p1%dd,
# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
# Here's a termcap entry I've been using for xterm_color, which comes
# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
# color stuff, I also have a status line defined as the window manager
# title bar. [I have translated it to terminfo -- ESR]
xterm-pcolor|xterm with color used for highlights and status line,
bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
smul=\E[4m\E[42m,
use=xterm+sl, use=xterm,
# HP ships this, except for the pb#9600 which was merged in from BSD termcap.
# (hpterm: added empty <acsc>, we have no idea what ACS chars look like --esr)
xhpterm|X-hpterm|hp X11 terminal emulator,
am, da, db, mir, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
rmul=\E&d@,
sgr=\E&d%?%p7%t%'s'%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%'@'%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# This entry describes an xterm with Sun-style function keys enabled
# via the X resource setting "xterm*sunFunctionKeys:true"
# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
# because we want it to be seen as <kcpy>.
# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
# with their Sun keyboard labels instead.
# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
xterm-sun|xterm with sunFunctionKeys true,
kb2=\E[218z, kcpy=\E[197z, kend=\E[220z, kf1=\E[224z,
kf10=\E[233z, kf11=\E[192z, kf12=\E[193z, kf13=\E[194z,
kf14=\E[195z, kf15=\E[196z, kf17=\E[198z, kf18=\E[199z,
kf19=\E[200z, kf2=\E[225z, kf20=\E[201z, kf3=\E[226z,
kf31=\E[208z, kf32=\E[209z, kf33=\E[210z, kf34=\E[211z,
kf35=\E[212z, kf36=\E[213z, kf38=\E[215z, kf4=\E[227z,
kf40=\E[217z, kf42=\E[219z, kf44=\E[221z, kf5=\E[228z,
kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, kich1=\E[2z,
knp=\E[222z, kpp=\E[216z, kund=\E[195z,
use=xterm,
xterms-sun|small (80x24) xterm with sunFunctionKeys true,
cols#80, lines#24, use=xterm-sun,
# This is for the extensible terminal emulator on the X11R6 contrib tape.
# (emu: I changed <setab>/<setaf> to <setb>/<setf> -- esr)
emu|emu native mode,
mir, msgr, xon,
colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
acsc=a\202f\260g261j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
bel=^G, blink=\ES\EW, bold=\ES\EU, civis=\EZ,
clear=\EP\EE0;0;, cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;,
cub=\Eq-%p1%d;, cub1=^H, cud=\Ep%p1%d;, cud1=\EB,
cuf=\Eq%p1%d;, cuf1=\ED, cup=\EE%p1%d;%p2%d;,
cuu=\Ep-%p1%d;, cuu1=\EA, cvvis=\Ea, dch=\EI%p1%d;,
dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN,
el=\EK, el1=\EL, enacs=\200, home=\EE0;0;, ht=^I, hts=\Eh,
il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, is2=\ES\Er0;\Es0;,
kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, kcuu1=\EA,
kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, kf10=\EF10,
kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, kf15=\EF15,
kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, kf2=\EF02,
kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, kf6=\EF06,
kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, kich1=\Eins,
knp=\Enext, kpp=\Eprior, kslt=\Esel, oc=\Es0;\Er0;,
rev=\ES\ET, ri=\EF, rmacs=\200, rmir=\EX, rmso=\ES, rmul=\ES,
rs2=\ES\Es0;\Er0;, setb=\Es%i%p1%d; setf=\Er%i%p1%d;,
sgr0=\ES, smacs=\200, smir=\EY, smso=\ES\ET, smul=\ES\EV,
tbc=\Ej,
######## MGR
#
# MGR is a Bell Labs window system lighter-weight than X.
# These entries describe MGR's xterm-equivalent.
# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
#
mgr|Bellcore MGR (non X) window system terminal emulation,
am, km,
bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
smul=\E4n,
mgr-sun|Mgr window with Sun keyboard,
ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
kc3=\E[222z, kcpy=\E197z, kend=\E[220z, kent=\E[250z,
kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
kopn=\E[198z, kpp=\E[216z, kund=\E[195z,
use=mgr,
mgr-linux|Mgr window with Linux keyboard,
ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, knp=\E[6~, kpp=\E[5~,
use=mgr,
######## UNIX VIRTUAL TERMINALS AND VIRTUAL CONSOLES
#
# Columbus UNIX virtual terminal. This terminal also appears in
# UNIX 4.0 and successors as line discipline 1 (?), but is
# undocumented and does not really work quite right.
cbunix|cb unix virtual terminal,
am, da, db,
cols#80, lines#24, lm#0,
bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
smso=\Ea^D, smul=\Ea^A,
# (vremote: removed obsolete ":nl@:" -- esr)
vremote|virtual remote terminal,
am@,
cols#79, use=cbunix,
pty|4bsd pseudo teletype,
cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
smso=\Ea$, smul=\Ea!,
use=cbunix,
# The codes supported by the term.el terminal emulation in GNU Emacs 19.30
eterm|gnu emacs term.el terminal emulation,
am, mir, xenl,
cols#80, lines#24,
bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
smul=\E[4m,
# Entries for use by the FSF's `screen' program. The screen and
# screen-w entries came with version 3.7.1. The screen2 and screen3 entries
# come from University of Wisconsin and may be older.
# (screen: added <cnorm> on ANSI model -- esr)
screen|VT 100/ANSI X3.64 virtual terminal,
am, km, mir, msgr, xenl,
colors#8, cols#80, it#8, lines#24, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++\,\,hhII00,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, enacs=\E(B\E)0, flash=\Eg,
home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m, rs2=\Ec, sc=\E7,
sgr0=\E[m, smacs=^N, smir=\E[4h, smkx=\E[?1h\E=,
smso=\E[3m, smul=\E[4m, tbc=\E[3g,
use=ecma+color,
screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
cols#132, use=screen,
screen2|VT 100/ANSI X3.64 virtual terminal,
cols#80, it#8, lines#24,
cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
smso=\E[3m, smul=\E[4m, tbc=\E[3g,
# (screen3: removed unknown ":xv:LP:G0:" -- esr)
screen3|VT 100/ANSI X3.64 virtual terminal,
km, mir, msgr,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
smul=\E[4m, tbc=\E[3g,
######## WORKSTATION CONSOLES
#
#### Sun consoles
#
# :is1: resets scrolling region in case a previous user had used "tset vt100"
oldsun|Sun Microsystems Workstation console,
am, km, mir, msgr,
cols#80, it#8, lines#34,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
rmso=\E[m, sgr0=\E[m, smso=\E[7m,
# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
sun-il|Sun Microsystems console with working insert-line,
am, km, msgr,
cols#80, lines#34,
bel=^G, bold=\E[1m, clear=^L, cr=^M, cub1=^H, cud1=^J,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J, kb2=\E[218z, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
kend=\E[220z, kf1=\E[224z, kf10=\E[233z, kf11=\E[234z,
kf12=\E[235z, kf2=\E[225z, kf3=\E[226z, kf4=\E[227z,
kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z,
kf9=\E[232z, khome=\E[214z, knp=\E[222z, kopt=\E[194z,
kpp=\E[216z, kres=\E[193z, kund=\E[195z, rev=\E[7m,
rmso=\E[m, rmul=\E[m, rs2=\E[s,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
sgr0=\E[m, smso=\E[7m, smul=\E[4m,
# On a SparcStation 5, <il1>/<il> flake out on the last line.
# Unfortunately, without them the terminal has no way to scroll.
sun-ss5|Sun SparcStation 5 console,
il@, il1@, use=sun-il,
# If you are using an SS5, change the sun definition to use sun-ss5.
sun|sun1|sun2|Sun Microsystems Inc. workstation console,
use=sun-il,
# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
sun-s|Sun Microsystems Workstation window with status line,
hs,
dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
hs,
dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
sun-48|Sun 48-line window,
cols#80, lines#48, use=sun,
sun-34|Sun 34-line window,
cols#80, lines#34, use=sun,
sun-24|Sun 24-line window,
cols#80, lines#24, use=sun,
sun-17|Sun 17-line window,
cols#80, lines#17, use=sun,
sun-12|Sun 12-line window,
cols#80, lines#12, use=sun,
sun-1|Sun 1-line window for sysline,
eslok, hs,
cols#80, lines#1,
dsl=^L, fsl=\E[K, tsl=^M, use=sun,
sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
ich1@, rmir@, smir@,
use=sun,
sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
lines#35,
rmcup=\E[>4h, smcup=\E[>4l, use=sun,
#### Iris consoles
#
# (wsiris: this had extension capabilities
# :HS=\E7F2:HE=\E7F7:\
# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
# See the note on Iris extensions near the end of this file.
# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
# <flash> from BRL -- esr)
wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
am,
cols#80, it#8, lines#40,
bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E;,
dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
smul=\E7R2\E9P,
#### NeWS consoles
#
# Console terminal windows under the NeWS (Sun's Display Postscript windowing
# environment). Note: these have nothing to do with Sony's News workstation
# line.
#
# Entry for NeWS's psterm from Eric Messick & Hugh Daniel
# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
psterm|psterm-basic|NeWS psterm-80x34,
am, hs, km, ul,
cols#80, it#8, lines#34,
blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
tsl=\EOl,
psterm-96x48|NeWS psterm 96x48,
cols#96, lines#48, use=psterm,
psterm-90x28|NeWS psterm 90x28,
cols#90, lines#28, use=psterm,
psterm-80x24|NeWS psterm 80x24,
cols#80, lines#24, use=psterm,
# This is a faster termcap for psterm. Warning: if you use this termcap,
# some control characters you type will do strange things to the screen.
# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
psterm-fast|NeWS psterm fast version (flaky ctrl chars),
am, hs, km, ul,
cols#80, it#8, lines#34,
blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
smso=^Oo, smul=^Ou, tsl=^Ol,
#### NeXT Consoles
#
# Use `glasstty' for the Workspace application
#
# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
next|NeXT console,
am, xt,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
nextshell|NeXT Shell application,
am,
cols#80,
bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
kcud1=^J, nel=^M^J,
### Common Desktop Environment
#
# This ships with Sun's CDE in Solaris 2.5
dtterm|CDE desktop terminal,
am, mir, msgr, xenl, xon,
colors#8, cols#80, it#8, lines#24, lm#0, pairs#64,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h$<200>\E[?5l, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m,
rmul=\E[24m, sc=\E7, setab=\E[%p1%{40}%+%dm,
setaf=\E[%p1%{30}%+%dm,
sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
######## COMMON TERMINAL TYPES
#
# This section describes terminal classes and maker brands that are still
# quite common, but have proprietary command sets not blessed by ANSI.
#
#### Altos
#
# Altos made a moderately successful line of UNIX boxes. In 1990 they were
# bought out by Acer, a major Taiwanese manufacturer of PC-clones.
# Acer has a web site at http://www.acer.com.
#
# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
# His comments suggest they were shipped with the system.
#
# (altos2: had extension capabilities
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
# :HL=^AP\r:SP=\E[i:\
# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
# Comparison with the k* capabilities makes it obvious that the c* things are
# shift keys. I have renamed them to keys 32 and up accordingly. Also,
# :sr: was given as a boolean-- esr)
altos2|alt2|altos-2|altos II,
cols#80, it#8, lines#24, xmc#0,
clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smam=\E[?7h, smso=\E[7m, smul=\E[4m,
# (altos3: had extension capabilities
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
# :HL=^AP\r:SP=\E[i:\
# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
blink=\E[5p, ri=\EM, sgr0=\E[p,
use=altos2,
altos4|alt4|altos-4|altos IV,
use=wy50,
# (altos7: had extension capabilities:
# :GG#0:GI=\EH8:GF=\EH7:\
# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
# Comparison with the k* capabilities makes it obvious that the c* things are
# shift keys. I have renamed them to keys 32 and up accordingly. I have
# also made this entry relative to adm12 in order to give it an <sgr>. The
# <invis> imported by use=adm+sgr may work, let me know. -- esr)
altos7|alt7|altos VII,
am, mir,
cols#80, lines#24, xmc#0,
acsc=l2m1k3j5t4u9v=w0q\:x6n8, blink=\EG2, bold=\EGt,
clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dim=\EGp, dl=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
ind=^J, invis=\EG1,
is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
rmir=\Er, smir=\Eq,
use=adm+sgr,
altos7pc|alt7pc|altos PC VII,
kend=\ET, use=altos7,
#### Hewlett-Packard (hp)
#
# Hewlett-Packard
# 8000 Foothills Blvd
# Roseville, CA 95747
# Vox: 1-(916)-785-4363 (Technical response line for VDTs)
# 1-(800)-633-3600 (General customer support)
#
# Generic HP terminal - this should (hopefully) work on any HP terminal.
hpgeneric|hp|hewlett-packard generic terminal,
am, da, db, mir, xhp,
cols#80, lines#24, lm#0, vt#6,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
vpa=\E&a%p1%dY,
hp110|hewlett-packard model 110 portable,
lines#16, use=hpgeneric,
hp+pfk+cr|hp function keys with CR,
kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
hp+pfk-cr|hp function keys w/o CR,
kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
kf8=\Ew,
# The hp2621s use the same keys for the arrows and function keys,
# but not separate escape sequences. These definitions allow the
# user to use those keys as arrow keys rather than as function
# keys.
hp+pfk+arrows|hp alternate arrow definitions,
kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
kll=\Eq\r, kri=\Es\r,
hp+arrows|hp arrow definitions,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
kind=\ES, kll=\EF, kri=\ET,
# Generic stuff from the HP 262x series
#
hp262x|HP 262x terminals,
xhp,
blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
sgr=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%c,
sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
# Note: no <home> on HPs since that homes to top of memory, not screen.
# Due to severe 2621 braindamage, the only way to get the arrow keys to
# transmit anything at all is to turn on the function key labels
# with <smkx>, and even then the user has to hold down shift!
# The default 2621 turns off the labels except when it has to to
# enable the function keys. If your installation prefers labels
# on all the time, or off all the time (at the "expense" of the
# function keys), use 2621-nl or 2621-wl.
#
# Note: there are newer ROMs for 2621's that allow you to set
# strap A so the regular arrow keys xmit \EA, etc, as with the
# 2645. However, even with this strap set, the terminal stops
# xmitting if you reset it, until you unset and reset the strap!
# Since there is no way to set/unset the strap with an escape
# sequence, we don't use it in the default.
# If you like, you can use 2621-ba (brain-damaged arrow keys).
hp2621-ba|2621 w/new rom and strap A set,
rmkx@, smkx@, use=hp+arrows,
use=hp2621,
# hp2621 with function labels. Most of the time they are off,
# but inside vi, the function key labels appear. You have to
# hold down shift to get them to xmit.
hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
is2=\E&jA\r, rmkx=\E&jA,
use=hp2621-fl,
hp2621-fl|hp 2621,
xhp@, xon,
pb#19200,
cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
use=hp+pfk+cr, use=hpgeneric,
# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
hp2621p|hp 2621 with printer,
mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
hp2621p-a|hp2621p with fn as arrows,
use=hp+pfk+arrows, use=hp2621p,
# hp2621 with k45 keyboard
hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A,
use=hp2621,
# 2621 using all 48 lines of memory, only 24 visible at any time.
hp2621-48|48 line 2621,
lines#48,
cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, use=hp2621,
# 2621 with no labels ever. Also prevents vi delays on escape.
hp2621-nl|hp 2621 with no labels,
kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, use=hp2621-fl,
# Needed for UCB ARPAVAX console, since lsi-11 expands tabs
# (wrong).
#
hp2621-nt|hp 2621 w/no tabs,
ht@, use=hp2621,
# Hp 2624 B with 4 or 10 pages of memory.
#
# Some assumptions are made with this entry. These settings are
# NOT set up by the initialization strings.
#
# Port Configuration
# RecvPace=Xon/Xoff
# XmitPace=Xon/Xoff
# StripNulDel=Yes
#
# Terminal Configuration
# InhHndShk=Yes
# InhDC2=Yes
# XmitFnctn(A)=No
# InhEolWrp=No
#
# Note: the 2624 DOES have a true <home>, believe it or not!
#
# The 2624 has an "error line" to which messages can be sent.
# This is CLOSE to what is expected for a "status line". However,
# after a message is sent to the "error line", the next carriage
# return is EATEN and the "error line" is turned back off again!
# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
#
# This entry supports emacs (and any other program that uses raw
# mode) at 4800 baud and less. I couldn't get the padding right
# for 9600.
#
# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
da, db,
lm#96,
flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
# This hp2626 entry does not use any of the fancy windowing stuff
# of the 2626.
#
# Indeed, terminfo does not yet handle such stuff. Since changing
# any window clears memory, it is probably not possible to use
# this for screen opt.
#
# ed is incredibly slow most of the time - I am guessing at the
# exact padding. Since the terminal uses xoff/xon this is intended
# only for cost computation, so that the terminal will prefer el
# or even dl1 which is probably faster!
#
# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
# extra slow on the last line of the window.
#
# The padding probably should be changed.
#
hp2626|hp2626a|hp2626p|hp 2626,
da, db,
lm#0, pb#19200,
ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
is2=\E&j@\r, rin=\E&r%p1%dU,
use=hp+pfk+cr, use=hp+labels, use=scrhp,
# This entry is for sysline. It allocates a 23 line window with
# a 115 line workspace for regular use, and a 1 line window for
# the status line.
#
# This assumes port 2 is being used.
# Turn off horizontal line, Create ws #1 with 115 lines,
# Create ws #2 with 1 line, Create window #1 lines 1-23,
# Create window #2 lines 24-24, Attach cursor to workspace #1.
# Note that this clears the tabs so it must be done by tset before
# it sets the tabs.
#
hp2626-s|hp 2626 using only 23 lines,
eslok, hs,
lines#23,
fsl=\E&d@\E&w7f2p1I\E&w4f1I,
is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC,
use=hp2626,
# Force terminal back to 24 lines after being 23.
hp2626-ns|hp 2626 using all 24 lines,
is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r, use=hp2626,
# Various entries useful for small windows on 2626.
hp2626-12|hewlett-packard 2626 12 lines,
lines#12, use=hp2626,
hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
cols#40, lines#12, use=hp2626,
hp2626-x40|hewlett-packard 2626 40 columns,
cols#40, use=hp2626,
hp2626-12-s|hewlett-packard 2626 11 lines plus status,
lines#11, use=hp2626-s,
#
# hp2627 color tubes from University of Wisconsin
#
hp2627a-rev|hp 2627 with reverse video colors,
cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
smul=\E&dD\E&v1S,
use=hp2621-nl,
hp2627a|hp 2627 color terminal with no labels,
cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
use=hp2621-nl,
hp2627c|hp 2627 color (cyan) terminal with no labels,
cr=^M, cud1=^J, ht=^I, ind=^J,
is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
use=hp2627a,
# hp2640a doesn't have the Y cursor addressing feature, and C is
# memory relative instead of screen relative, as we need.
#
hp2640a|hp 2640a,
cup@, rmkx@, smkx@, use=hp2645,
hp2640b|hp2644a|hp 264x series,
rmkx@, smkx@, use=hp2645,
# (hp2641a: removed unknown :gu: -- esr)
hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
am, da, db, mir, xhp,
cols#80, lines#24,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
if=/usr/share/tabset/std, il1=\EL, ind=^J,
is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
vpa=\E&a%p1%2dY,
# This terminal should be used at 4800 baud or less. It needs padding for
# plain characters at 9600, I guessed at an appropriate cr delay. It really
# wants ^E/^F handshaking, but that doesn't work well even if you write
# software to support it.
hp2645|hp45|HP 2645 series,
pb#9600,
blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
rmkx=\E&s0A,
sgr=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%?%p5%t%'H'%|%;%?%p6%t%'B'%|%;%c,
sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD,
use=hpgeneric,
# You should use this terminal at 4800 baud or less.
hp2648|hp2648a|HP 2648a graphics terminal,
clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
dch1=\EP$<7>, ip=$<5>,
use=hp2645,
# The HP 150 terminal is a fairly vanilla HP terminal, with the
# clreol standout problem. It also has graphics capabilities and
# a touch screen, which we don't describe here.
hp150|hewlett packard Model 150,
use=hp2622,
# HP 2382a terminals, "the little ones." They don't have any
# alternate character set support and sending out ^N/^O will
# leave the screen blank.
hp2382a|hp2382|hewlett packard 2382a,
da, db,
lh#1, lm#48,
acsc@,
pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
rmacs@,
sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%'@'%+%e%'S'%;%e%?%ga%t%ga%'@'%+%e%'@'%;%;%c,
sgr0=\E&d@, smacs@,
use=hp+labels, use=scrhp,
hp2621-a|hp2621a-a|hp2621 with fn as arrows,
use=hp+pfk+arrows, use=hp2621-fl,
# newer hewlett packard terminals
newhpkeyboard|generic entry for HP extended keyboard,
kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
use=hp+pfk-cr,
newhp|generic entry for new hewlett packard terminals,
am, bw, mir, xhp, xon,
cols#80, lines#24, pb#4800,
acsc=T1R!U2S"W3O#V4P$t5u6w7v8\:'9(LQKWlRkT5I3@2[MAJSmFjGdHQ;Y+Z*X\:4>q\,x.n/,
bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%'@'%+%e%'S'%;%e%?%ga%t%ga%'@'%+%e%'@'%;%;%c%?%p9%t\016%e\017%;,
sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
tbc=\E3,
use=newhpkeyboard,
memhp|memory relative addressing for new HP ttys,
vt#6,
clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
scrhp|screen relative addressing for new HP ttys,
clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
# (hp+labels: added label values from a BRL termcap -- esr)
hp+labels|"standard" label info for new HP ttys,
lh#2, lw#8, nlab#8,
lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
rmln=\E&j@, smln=\E&jB,
hp+printer|"standard" printer info for HP ttys,
ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
# The new hp2621b is kind of a cross between the old 2621 and the
# new 262x series of machines. It has dip-switched options.
# The firmware has a bug in it such that if you give it a null
# length label, the following character is eaten!
hp2621b|hp 2621b with old style keyboard,
lh#1, lm#48, lw#8, nlab#8,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
kind=\ET, kll=\EF, kri=\ES,
pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%'o'%p1%+%c\r,
smln=\E&jB,
use=hp2621,
hp2621b-p|hp 2621b with printer,
use=hp+printer, use=hp2621b,
# hp2621b - new 2621b with new extended keyboard
# these are closer to the new 26xx series than the other 2621b
hp2621b-kx|hp 2621b with extended keyboard,
use=newhpkeyboard, use=hp2621b,
hp2621b-kx-p|hp 2621b with new keyboard & printer,
use=hp+printer, use=hp2621b-kx,
# Some assumptions are made in the following entries.
# These settings are NOT set up by the initialization strings.
#
# Port Configuration
# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
#
# Terminal Configuration
# InhHndShk(G)=Yes InhDC2(H)=Yes
# XmitFnctn(A)=No InhEolWrp=No
#
#
# Hp 2622a & hp2623a display and graphics terminals
#
hp2622|hp2622a|hp 2622,
da, db,
lm#0, pb#19200,
is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
# The 2623 is a 2622 with extra graphics hardware.
hp2623|hp2623a|hp 2623,
use=hp2622,
hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
use=hp+printer, use=hp2624,
# The hewlett packard B can have an optional extra 6 pages of memory.
hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
lm#240, use=hp2624,
hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
lm#240, use=hp2624b-p,
# Color manipulations for HP terminals
hp+color|hp with colors,
ccc,
colors#16, ncv#17, pairs#7,
initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a\n%?%p3%{1000}%=%t1%e.%p3%d%;b\n%?%p4%{1000}%=%t1%e.%p4%d%;c\n%?%p5%{1000}%=%t1%e.%p5%d%;x\n%?%p6%{1000}%=%t1%e.%p6%d%;y\n%?%p7%{1000}%=%t1%e.%p7%d%;z\n%p1%dI,
oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
op=\E&v0S, scp=\E&v%p1%dS,
# <is2> sets the screen to be 80 columns wide
hp2397a|hp2397|hewlett packard 2397A color terminal,
is2=\E&w6f80X,
use=memhp, use=hp+labels, use=hp+color,
# HP 700/44 Setup parameters:
# Terminal Mode HP-PCterm
# Inhibit Auto Wrap NO
# Status Line Host Writable
# PC Character Set YES
# Twenty-Five Line Mode YES
# XON/XOFF @128 or 64 (sc)
# Keycode Mode NO or YES (sc)
# Backspace Key BS or BS/DEL
#
# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
# \E\\? does not turn off keycode mode
# <smsc> sets alternate start/stop; keycode on
hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
am, eo, xenl, xon,
cols#80, lines#25,
acsc=k\277l\332m\300j\331n\305w\302q\304u\264t\303v\301x\263,
bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
ind=^J,
is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
kpp=\E[5~, rmam=\E[?7l,
rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
smul=\E[4m, xoffc=g, xonc=e,
#
# (hp2392: copied <rmir> here from hpex -- esr)
hp2392|239x series,
cols#80,
cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
use=hpsub,
hpsub|hp terminals -- capability subset,
am, da, db, mir, xhp, xon,
lines#24,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
# hpex:
# May be used for most 24 x 80 hp terminals,
# but has no padding added, so may allow runover in some terminals at high
# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
# hp98x5 terminal emulators or hp98x6 consoles.
# Adds xy-cursor addressing, vertical cursor addressing, home,
# last line, and underline capabilities.
#
# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
# moved <rmir> here from hpsub -- esr)
hpex|hp extended capabilites,
cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
smul=\E&dD, vpa=\E&a%p1%dY,
use=hpsub,
# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
hp2|hpex2|hewlett-packard extended capabilities newer version,
am, da, db, mir, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
sgr=\E&d%?%p7%t%'s'%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%'@'%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# HP 236 console
# From: <ddavis@ic.berkeley.edu>
hp236|hp236 internal terminal emulator,
am,
cols#80, lines#24,
clear=\EF, cnorm=\EDE, cub1=^H,
cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
sgr0=\ECI, smso=\EBI,
# This works on a hp300 console running Utah 4.3 BSD
# From: Craig Leres <leres@okeeffe.berkeley.edu>
hp300h|HP Catseye console,
am, da, db, mir, xhp,
cols#128, lines#51, lm#0, xmc#0,
bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
vpa=\E&a%p1%dY,
# From: Greg Couch <gregc@ernie.berkeley.edu>
hp9837|hp98720|hp98721|HP 9000/300 workstations,
am, da, db, mir, xhp,
cols#128, it#8, lines#46, lm#0,
bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
tbc=\E3, vpa=\E&a%p1%dY,
# HP 9845 desktop computer from BRL
# (hp9845: removed unknown capability :gu: -- esr)
hp9845|HP 9845,
am, da, db, eo, mir, xhp,
cols#80, lines#21,
clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA,
dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
smir=\EQ, smso=\E&dB,
# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
hp98550|hp98550a|HP 9000 Series 300 color console,
am, da, db, mir, xhp,
cols#128, it#8, lines#49, lm#0,
acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# From: Victor Duchovni <vic@fine.princeton.edu>
# (hp700-wy: removed obsolete ":nl=^J:";
# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
hp700-wy|HP700/41 emulating wyse30,
am, bw, mir, msgr,
cols#80, it#8, lines#24, xmc#1,
cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
# (hp70092: added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
hp70092|hp70092a|hp70092A|HP 700/92,
am, da, db, xhp,
cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
acsc=, bel=^G, blink=\E&dA, bold=\E&dB, cbt=\Ei,
clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dB,
ri=\ET, rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@,
rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smacs=^N, smir=\EQ,
smkx=\E&s1A, smln=\E&jB, smso=\E&dJ, smul=\E&dD, tbc=\E3,
vpa=\E&a%p1%dY,
bobcat|sbobcat|HP 9000 model 300 console,
am, da, db, mir, xhp,
cols#128, it#8, lines#47, xmc#0,
cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\E&a%dy%dC$<6/>, cuu1=\EA, dch1=\EP, dl1=\EM$<10*/>,
ed=\EJ, el=\EK, hpa=\E&a%dC$<6/>, ht=^I, il1=\EL$<10*/>,
ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
khome=\Eh, nel=^M^J, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@,
rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&dB,
smul=\E&dD, vpa=\E&a%dY$<6/>,
gator-t|HP 9000 model 237 emulating extra-tall AAA,
lines#94, use=gator,
gator|HP 9000 model 237 emulating AAA,
bw, km, mir, ul,
cols#128, it#8, lines#47,
bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
gator-52|HP 9000 model 237 emulating VT52,
cols#128, lines#47, use=vt52,
gator-52t|HP 9000 model 237 emulating extra-tall VT52,
lines#94, use=gator-52,
#### Honeywell-Bull
#
# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
#
# Honeywell Bull terminal. Its cursor and function keys send single
# control characters and it has standout/underline glitch. Most programs
# do not like these features/bugs. Visual bell is realized by flashing the
# "keyboard locked" LED.
dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
cols#80, lines#25,
clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
dku7003|Honeywell Bull DKU 7003 all features described,
msgr,
xmc#1,
blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
use=dku7003-dumb,
#### Lear-Siegler (adm)
#
# These guys are long since out of the terminals business, but
# in 1995 many current terminals still have an adm type as one of their
# emulations (usually their stupidest, and usually labeled adm3, though
# these `adm3' emulations normally have adm3a+ capabilities).
#
# WARNING: Some early ADM terminals (including the ADM3 and ADM5) are
# reputed to have had the weird `feature' that sending them a ^G would trigger
# a diagnostic dump to screen if one of the more obscure RS-232 pins
# (variously reported as 22 or as `Ring Indicator') was being held high during
# receipt of the ^G. If you have a real ADM and think you've run into this,
# check it out with a breakout box and tell us if this rumor is correct!
# A quick fix might be to drop back to a cheesy 4-wire cable.
#
adm1a|adm1|lsi adm1a,
am,
cols#80, lines#24,
bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
ind=^J,
adm2|lsi adm2,
am,
cols#80, lines#24,
bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
# (adm3: removed obsolete ":ma=^K^P:" -- esr)
adm3|lsi adm3,
am,
cols#80, lines#24,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
# The following ADM-3A switch settings are assumed for normal operation:
# SPACE U/L_DISP CLR_SCRN 24_LINE
# CUR_CTL LC_EN AUTO_NL FDX
# Other switches may be set for operator convenience or communication
# requirements. I recommend
# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
# ETX_OFF EOT_OFF
# Most of these terminals required an option ROM to support lower case display.
# Open the case and look at the motherboard; if you see an open 24-pin DIP
# socket, you may be out of luck.
#
# (adm3a: some capabilities merged in from BRl entry -- esr)
adm3a|lsi adm3a,
am,
cols#80, lines#24,
bel=^G, clear=\032$<1/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rs1=^N,
adm3a+|adm3a plus,
kbs=^H, use=adm3a,
# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
adm5|lsi adm5,
xmc#1,
bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
rmso=\EG, smso=\EG,
use=adm3a+,
# A lot of terminals other than adm11s use these. Wherever you see
# use=adm+sgr with some of its capabilities disabled, try the
# disabled ones. They may well work but not have been documented or
# expressed in the using entry. We'd like to cook up an <sgr> but the
# <rmacs>/<smacs> sequences of the using entries vary too much.
adm+sgr|adm style highlight capabilities,
invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
smso=\EG4, smul=\EG8,
# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
# be ^Z, according to his entry.
# (adm11: <smul>=\EG4 was obviously erroneous because it also said
# <rev>=\EG4. Looking at other ADMs confirms this -- esr)
adm11|LSI ADM-11,
am, hs,
cols#80, lines#24,
bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H, cud1=^J,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, kbs=^H,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
use=adm+sgr,
# From: Andrew Scott Beals <bandy@lll-crg.ARPA>
# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
# via BRL. That entry asserted <xmc#1>, but I've left that out because
# neither earlier nor later ADMSs have it -- esr)
adm12|lsi adm12,
am, mir,
cols#80, it#8, lines#24,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
use=adm+sgr,
# (adm20: removed obsolete ":kn#7:" -- esr)
adm20|lear siegler adm20,
am,
cols#80, it#8, lines#24,
bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
sgr0=\E(, smso=\E),
adm21|lear siegler adm21,
xmc#1,
bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
use=adm+sgr, use=adm3a,
# (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
# removed bogus-looking \200 from before <cup>. -- esr)
adm22|lsi adm22,
am,
cols#80, lines#24,
bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
is2=\E%\014\014\014\016\003\200\003\002\003\002\200\200\200\200\200\200\200\200\200\200\200,
kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
# ADM 31 DIP Switches
#
# This information comes from two versions of the manual for the
# Lear-Siegler ADM 31.
#
# Main board:
# rear of case
# +-||||-------------------------------------+
# + S1S2 ||S +
# + ||3 +
# + +
# + ||S +
# + ||4 +
# + +
# + +
# + +
# + +
# + +
# +-+ +-+
# + +
# + S5 S6 S7 +
# + == == == +
# +----------------------------------------------+
# front of case (keyboard)
#
# S1 - Data Rate - Modem
# S2 - Data Rate - Printer
# ------------------------
# Data Rate Setting
# -------------------
# 50 0 0 0 0
# 75 1 0 0 0
# 110 0 1 0 0
# 134.5 1 1 0 0
# 150 0 0 1 0
# 300 1 0 1 0
# 600 0 1 1 0
# 1200 1 1 1 0
# 1800 0 0 0 1
# 2000 1 0 0 1
# 2400 0 1 0 1
# 3600 1 1 0 1
# 4800 0 0 1 1
# 7200 1 0 1 1
# 9600 0 1 1 1
# x 1 1 1 1
#
# S3 - Interface/Printer/Attributes
# ---------------------------------
# Printer Busy Control
# sw1 sw2 sw3
# ---------------
# off off off Busy not active, CD disabled
# off off on Busy not active, CD enabled
# off on off Busy active on J5-20, CD disabled
# on off off Busy active on J5-19, CD disabled - Factory Set.
# on off on Busy active on J5-19, CD enabled
#
# sw4 Used in conjuction with S4 for comm interface control - Fact 0
#
# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
#
# sw6 ON enables printer BUSY active LOW - Factory Setting
# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
#
# sw7 ON - steady cursor - Factory Setting
# OFF - blinking cursor
#
# sw8 ON causes selected attribute character to be displayed
# OFF causes SPACE to be displayed instead - Factory Setting
#
# S4 - Interface
# --------------
# Modem Interface
# S3 S4 S4 S4 S4
# sw4 sw1 sw2 sw3 sw4
# ---------------------------
# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
# Current Loop disabled - Factory Setting
# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
# disabled
# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
# Current Loop Disabled
#
# sw5 ON disables dot stretching mode - Factory Setting
# OFF enables dot stretching mode
# sw6 ON enables blanking function
# OFF enables underline function - Factory Setting
# sw7 ON causes NULLS to be displayed as NULLS
# OFF causes NULLS to be displayed as SPACES - Factory Setting
#
# S5 - Word Structure
# -------------------
# sw1 ON enables BREAK key - Factory Setting
# OFF disables BREAK key
# sw2 ON selects 50Hz monitor refresh rate
# OFF selects 60Hz monitor refresh rate - Factory Setting
#
# Modem Port Selection
# sw3 sw4 sw5
# ---------------
# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
#
# sw6 ON sends bit 8 a 1 (mark)
# OFF sends bit 8 as 0 (space) - Factory Setting
# sw7 ON selects Block Mode
# OFF selects Conversation Mode - Factory Setting
# sw8 ON selects Full Duplex operation
# OFF selects Half Duplex operation - Factory Setting
#
# S6 - Printer
# ------------
# sw1, sw2, sw6, sw7 Reserved - Factory 0
#
# Printer Port Selection
# same as Modem above, bit 8 (when 8 DATA bits) is always = 0
#
# sw8 ON enables Printer Port
# OFF disables Printer Port - Factory Setting
#
# S7 - Polling Address
# --------------------
# sw1-7 Establish ASCII character which designates terminal polling address
# ON = logic 0
# OFF = logic 1 - Factory Setting
# sw8 ON enables Polling Option
# OFF disables Polling Option - Factory Setting
#
#
# On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
#
# This adm31 entry uses underline as the standout mode.
# If the adm31 gives you trouble with standout mode, check the DIP switch in
# position 6, bank @c11, 25% from back end of the circuit board. Should be
# OFF. If there is no such switch, you have an old adm31 and must use oadm31.
# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
adm31|lsi adm31 with sw6 set for underline mode,
am, mir,
cols#80, lines#24,
bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
adm31-old|o31|old adm31,
rmul@, smso=\EG4, smul@, use=adm31,
# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
adm36|LSI ADM36,
if=/usr/lib/tabset/vt100,
is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100,
# (adm42: removed obsolete ":ma=^K^P:" -- esr)
adm42|lsi adm42,
am,
cols#80, lines#24,
bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
smir=\Eq, smul@,
use=adm+sgr,
# The following termcap for the Lear Siegler ADM-42 leaves the
# "system line" at the bottom of the screen blank (for those who
# find it distracting otherwise)
adm42-ns|lsi adm-42 with no system line,
cbt=\EI\EF \011, clear=\E;\EF \011,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
smir=\Eq\EF \011,
use=adm42,
# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
# The insert mode of this terminal is commented out because it's broken for our
# purposes in that it will shift the position of every character on the page,
# not just the cursor line!
# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
adm1178|1178|lsi adm1178,
am,
cols#80, lines#24, xmc#1,
bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
sgr0=\E), smso=\EG4, smul=\EG1,
#### Prime
#
# Yes, Prime makes terminals. These entries were posted by Kevin J. Cummings
# <cummings@primerd.Prime.COM> on 14 Dec 1992 and lightly edited by esr.
#
# Standout mode is dim reverse-video.
pt100|pt200|wren|fenix|prime pt100/pt200,
am, bw, mir, msgr,
cols#80, it#8, lines#24,
cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E0%p1%'!'%+%c%p2%'!'%+%c, cuu=\E[%p1%dA, cuu1=\EM,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[M, ed=\E[J\E[r,
el=\E[K\E[t, flash=\E$$<200/>\E$P, home=\E$B, ht=^I,
il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J, rmcup=,
rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
cols#132,
cup=\E[%i%p1%d;%p2%dH, use=pt100,
pt250|Prime PT250,
rmso@, smso@, use=pt100,
pt250w|Prime PT250 in 132-column mode,
rmso@, smso@, use=pt100w,
#### Qume (qvt)
#
# Qume, Inc.
# 3475-A North 1st Street
# San Jose CA 95134
# Vox: (800)-457-4447
# Fax: (408)-473-1510
# Net: josed@techsupp.wyse.com (Jose D'Oliveira)
#
# Qume was bought by Wyse, but still (as of early 1995) has its own support
# group and production division.
#
# Discontinued Qume models:
#
# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
# built to replace them, and a qvt119+ which was a 101+ with available wide
# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
# and an ANSI-compatible qvt203 that replaced it. Qume started producing
# ANSI-compatible terminals with the qvt323 and qvt61.
#
# Current Qume models (as of February 1995):
#
# All current Qume terminals have ANSI-compatible operation modes.
# Qume is still producing the qvt62, which features emulations for other
# popular lines such as ADDS, and dual-host capabilities. The qvt82 is
# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
# with many emulations including Wyse370, Wyse 325, etc. Their newest
# model is the qvt520, which is vt420-compatible.
#
# There are some ancient printing Qume terminals under `Daisy Wheel Printers'
qvt101|qvt108|qume qvt 101 and QVT 108,
xmc#1, use=qvt101+,
# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
# file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
# What seems to be going on here is that this entry was designed so that
# the normal highlight is bold and standout is dim plus something else
# (reverse-video maybe? But then, are there two <rev> sequences?)
qvt101+|qvt101p|qume qvt 101 PLUS product,
am, bw, hs, ul,
cols#80, lines#24, xmc#0,
bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef,
use=adm+sgr,
qvt102|qume qvt 102,
cnorm=\E., use=qvt101,
# (qvt103: added <rmam>/<smam> based on init string -- esr)
qvt103|qume qvt 103,
am, xenl, xon,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
qvt103-w|qume qvt103 132 cols,
cols#132, lines#24,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
am, hs, mir, msgr,
cols#80, lines#24, xmc#0,
bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
tbc=\E3, tsl=\Eg\Ef,
use=adm+sgr,
qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
lines#25, use=qvt119+,
qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
cols#132,
is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
lines#25, use=qvt119+,
qvt203|qvt203+|qume qvt 203 Plus,
dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
kf9=\E[28~, rmir=\E[4l, smir=\E[4h,
use=qvt103,
qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
cols#132, lines#24,
rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
#
# Since a command is present for enabling 25 data lines,
# a specific terminfo entry may be generated for the 203.
# If one is desired for the QVT 119 PLUS then 25 lines must
# be selected in the status line (setup line 9).
#
qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
cols#80, lines#25,
is2=\E[=40h\E[?3l, use=qvt203,
qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
cols#132, lines#25,
rs2=\E[?3h\E[=40h, use=qvt203,
#### Televideo (tvi)
#
# TeleVideo
# 550 East Brokaw Road
# PO Box 49048 95161
# San Jose CA 95112
# Vox: (408)-954-8333
# Fax: (408)-954-0623
#
#
# There are some tvi terminals that require incredible amounts of padding and
# some that don't. I'm assuming tvi912 and tvi920 are the old slow ones, and
# tvi912b, tvi912c, tvi920b, tvi920c are the new ones that don't need padding.
#
# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
# Televideo terminals are ANSI and PC-ANSI compatible.
tvi803|televideo 803,
clear=\E*$<10>, use=tvi950,
# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
# Switch settings are:
#
# S1 1 2 3 4
# D D D D 9600
# D D D U 50
# D D U D 75
# D D U U 110
# D U D D 135
# D U D U 150
# D U U D 300
# D U U U 600
# U D D D 1200
# U D D U 1800
# U D U D 2400
# U D U U 3600
# U U D D 4800
# U U D U 7200
# U U U D 9600
# U U U U 19200
#
# S1 5 6 7 8
# U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
# U D X U 7N2
# U U D D 7O1
# U U D U 7O2
# U U U D 7E1
# U U U U 7E2
# D D X D 8N1
# D D X U 8N2
# D U D D 8O1
# D U U U 8E2
#
# S1 9 Autowrap
# U on
# D off
#
# S1 10 CR/LF
# U do CR/LF when CR received
# D do CR when CR received
#
# S2 1 Mode
# U block
# D conversational
#
# S2 2 Duplex
# U half
# D full
#
# S2 3 Hertz
# U 50
# D 60
#
# S2 4 Edit mode
# U local
# D duplex
#
# S2 5 Cursor type
# U underline
# D block
#
# S2 6 Cursor down key
# U send ^J
# D send ^V
#
# S2 7 Screen colour
# U green on black
# D black on green
#
# S2 8 DSR status (pin 6)
# U disconnected
# D connected
#
# S2 9 DCD status (pin 8)
# U disconnected
# D duplex
#
# S2 10 DTR status (pin 20)
# U disconnected
# D duplex
# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
tvi910|televideo model 910,
am, msgr,
cols#80, it#8, lines#24, xmc#1,
bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
vpa=\E[%p1%{32}%+%c, use=adm+sgr,
# From: Alan R. Rogers <rogers%albany@csnet-relay>
# as subsequently hacked over by someone at SCO
# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
#
# Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
#
# S1 1 2 3 4:
# D D D D 9600 D D D U 50 D D U D 75 D D U U 110
# D U D D 135 D U D U 150 D U U D 300 D U U U 600
# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
#
# S1 5 6 7 8:
# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
# D U D D 8O1 D U U U 8E2
#
# S1 9 Autowrap (U = on, D = off)
# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
# S2 1 Mode (U = block, D = conversational)
# S2 2 Duplex (U = half, D = full)
# S2 3 Hertz (U = 50, D = 60)
# S2 4 Edit mode (U = local, D = duplex)
# S2 5 Cursor type (U = underline, D = block)
# S2 6 Cursor down key (U = send ^J, D = send ^V)
# S2 7 Screen colour (U = green on black, D = black on green)
# S2 8 DSR status (pin 6) (U = disconnected, D = connected)
# S2 9 DCD status (pin 8) (U = disconnected, D = connected)
# S2 10 DTR status (pin 20) (U = disconnected, D = connected)
#
tvi910+|televideo 910+,
dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
ll=\E=7\s,
use=tvi910,
# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
# <khome> from BRL entry -- esr)
tvi912|tvi914|tvi920|old televideo 912/914/920,
am, msgr,
cols#80, it#8, lines#24, xmc#1,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
tbc=\E3,
# the 912 has a <funct> key that's like shift: <funct>8 xmits "^A8\r".
# The 920 has this plus real function keys that xmit different things.
# Terminfo makes you use the funct key on the 912 but the real keys on the 920.
tvi912c|tvi912b|new televideo 912,
dl1=\ER$<5*>, il1=\EE$<5*>, use=tvi912,
# set to page 1 when entering curses application (\E-17 )
# reset to page 0 when exiting curses application (\E-07 )
tvi912-2p|tvi920-2p|tvi-2p|televideo w/2 pages,
rmcup=\E-07\s, smcup=\E-17\s, use=tvi912,
# We got some new tvi912c terminals that act really weird on the regular
# termcap, so one of our gurus worked this up. Seems that cursor
# addressing is broken.
tvi912cc|tvi912 at cowell college,
cup@, use=tvi912c,
# Here are the switch settings for the tvi920c:
#
# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
# 2: 9600 3: 4800 4: 2400 5: 1200
# 6: 600 7: 300 8: 150 9: 75
# 10: 110
#
# S2 UART/Terminal options:
# Up Down
# 1: Not used Not allowed
# 2: Alternate character set Standard character set
# 3: Full duplex Half duplex
# 4: 50 Hz refresh 60 Hz refresh
# 5: No parity Send parity
# 6: 2 stop bits 1 stop bit
# 7: 8 data bits 7 data bits
# 8: Not used Not allowed on Rev E or lower
# 9: Even parity Odd parity
# 10: Steady cursor Blinking cursor
# (On Rev E or lower, use W25 instead of switch 10.)
#
# S5 UART/Terminal options:
# Open Closed
# 1: P3-6 Not connected DSR received on P3-6
# 2: P3-8 Not connected DCD received on P3-8
#
# 3 Open, 4 Open: P3-20 Not connected
# 3 Open, 4 Closed: DTR on when terminal is on
# 3 Closed, 4 Open: DTR is connected to RTS
# 3 Closed, 4 Closed: Not allowed
#
# 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
# all data transmitted out of the modem port (P3) will also be
# transmitted out of the printer port (P4).
#
# 6 Open, 7 Open: Not allowed
# 6 Open, 7 Closed: 20ma current loop input
# 6 Closed, 7 Open: RS232 input
# 6 Closed, 7 Closed: Not allowed
#
# Jumper options:
# If the jumper is installed, the effect will occur (the next time the terminal
# is switched on).
#
# S4/W31: Enables automatic LF upon receipt of CR from
# remote or keyboard.
# S4/W32: Enables transmission of EOT at the end of Send. If not
# installed, a carriage return is sent.
# S4/W33: Disables automatic carriage return in column 80.
# S4/W34: Selects Page Print Mode as initial condition. If not
# installed, Extension Mode is selected.
#
tvi920b|tvi920c|new televideo 920,
dl1=\ER$<5*>, il1=\EE$<5*>, kf0=^AI\r, kf1=^A@\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
use=tvi912,
# Televideo 921 and variants
# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
# (tvi921: removed :ko=bt: before translation, I see no backtab cap;
# also added empty <acsc> to suppress tic warning -- esr)
tvi921|televideo model 921 with sysline same as page & real vi function,
am, hs, xenl, xhp,
cols#80, lines#24, xmc#0,
acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%,
rmir=, smacs=\E$, smir=, tsl=\Ef\EG0,
use=adm+sgr,
# without the beeper
# (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
# also added empty <acsc> to suppress tic warning -- esr)
tvi92B|televideo model 921 with sysline same as page & real vi function,
am, hs, xenl, xhp,
cols#80, lines#24, xmc#0,
acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
nel=^M^J, rmacs=\E%, rmir=, smacs=\E$, smir=, tsl=\Ef\EG0,
use=adm+sgr,
# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
dl1=\ER$<2*/>, il1=\EE$<2*/>,
is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
kil1=\EE$<2*/>,
use=tvi92B,
# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
# in from a BSD termcap file because it looks like they do something the
# old ones skip -- esr)
tvi924|televideo tvi924,
am, bw, hs, in, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80, xmc#0,
bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
pfkey=\E|%p1%'1'%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, use=adm+sgr,
# TVI925 DIP switches. In each of these, D = Down and U = Up,
#
# Here are the settings for the external (baud) switches (S1):
#
# Position Baud
# 7 8 9 10 [Printer]
# 1 2 3 4 [Main RS232]
# -----------------------------------------------------
# D D D D 9600
# D D D U 50
# D D U D 75
# D D U U 110
# D U D D 135
# D U D U 150
# D U U D 300
# D U U U 600
# U D D D 1200
# U D D U 1800
# U D U D 2400
# U D U U 3600
# U U D D 4800
# U U D U 7200
# U U U D 9600
# U U U U 19200
#
#
# Settings for word length and stop-bits (S1)
#
# Position Description
# 5 6
# ---------------------------
# U - 7-bit word
# D - 8-bit word
# - U 2 stop bits
# - D 1 stop bit
#
#
# S2 (external) settings
#
# Position Up Dn Description
# --------------------------------------------
# 1 X Local edit
# X Duplex edit (transmit editing keys)
# --------------------------------------------
# 2 X 912/920 emulation
# X 925
# --------------------------------------------
# 3 X
# 4 X No parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Odd parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Even parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Mark parity
# 5 X
# --------------------------------------------
# 3 X
# 4 X Space parity
# 5 X
# --------------------------------------------
# 6 X White on black display
# X Black on white display
# --------------------------------------------
# 7 X Half Duplex
# 8 X
# --------------------------------------------
# 7 X Full Duplex
# 8 X
# --------------------------------------------
# 7 X Block mode
# 8 X
# --------------------------------------------
# 9 X 50 Hz
# X 60 Hz
# --------------------------------------------
# 10 X CR/LF (Auto LF)
# X CR only
#
# S3 (internal switch) settings:
#
# Position Up Dn Description
# --------------------------------------------
# 1 X Keyclick off
# X Keyclick on
# --------------------------------------------
# 2 X English
# 3 X
# --------------------------------------------
# 2 X German
# 3 X
# --------------------------------------------
# 2 X French
# 3 X
# --------------------------------------------
# 2 X Spanish
# 3 X
# --------------------------------------------
# 4 X Blinking block cursor
# 5 X
# --------------------------------------------
# 4 X Blinking underline cursor
# 5 X
# --------------------------------------------
# 4 X Steady block cursor
# 5 X
# --------------------------------------------
# 4 X Steady underline cursor
# 5 X
# --------------------------------------------
# 6 X Screen blanking timer (ON)
# X Screen blanking timer (OFF)
# --------------------------------------------
# 7 X Page attributes
# X Line attributes
# --------------------------------------------
# 8 X DCD disconnected
# X DCD connected
# --------------------------------------------
# 9 X DSR disconnected
# X DSR connected
# --------------------------------------------
# 10 X DTR Disconnected
# X DTR connected
# --------------------------------------------
#
# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
tvi925|televideo 925,
am, bw, hs, ul,
cols#80, lines#24, xmc#1,
bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
tsl=\Eh\Ef,
use=adm+sgr,
# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
# to avoid "magic cookie" standout glitch:
tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
xmc@,
kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
# for additional capabilities,
# The following tvi descriptions from B:pjphar and virus!mike
# is for all 950s. It sets the following attributes:
# full duplex (\EDF) write protect off (\E()
# conversation mode (\EC) graphics mode off (\E%)
# white on black (\Ed) auto page flip off (\Ew)
# turn off status line (\Eg) clear status line (\Ef\r)
# normal video (\E0) monitor mode off (\EX or \Eu)
# edit mode (\Er) load blank char to space (\Ee\040)
# line edit mode (\EO) enable buffer control (^O)
# protect mode off (\E\047) duplex edit keys (\El)
# program unshifted send key to send line all (\E016)
# program shifted send key to send line unprotected (\E004)
# set the following to nulls:
# field delimiter (\Ex0\200\200)
# line delimiter (\Ex1\200\200)
# start-protected field delimiter (\Ex2\200\200)
# end-protected field delimiter (\Ex3\200\200)
# set end of text delimiter to carriage return/null (\Ex4\r\200)
#
# TVI 950 Switch Setting Reference Charts
#
# TABLE 1:
#
# S1 1 2 3 4 5 6 7 8 9 10
# +-----------------------+-----+-----+-----------------------+
# | Computer Baud Rate |Data |Stop | Printer Baud Rate |
# | |Bits |Bits | |
# +------+-----------------------+-----+-----+-----------------------+
# | Up | See | 7 | 2 | See |
# +------+-----------------------+-----+-----+-----------------------+
# | Down | TABLE 2 | 8 | 1 | TABLE 2 |
# +------+-----------------------+-----+-----+-----------------------+
#
#
# S2 1 2 3 4 5 6 7 8 9 10
# +-----+-----+-----------------+-----+-----------+-----+-----+
# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
# | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
# +------+-----+-----+-----------------+-----+-----------+-----+-----+
#
# TABLE 2:
#
# +-----------+-----+-----+-----+-----+-----------+
# | Display | 1 | 2 | 3 | 4 | Baud |
# +-----------+-----+-----+-----+-----+ |
# | Printer | 7 | 8 | 9 | 10 | Rate |
# +-----------+-----+-----+-----+-----+-----------+
# | D | D | D | D | 9600 |
# | U | D | D | D | 50 |
# | D | U | D | D | 75 |
# | U | U | D | D | 110 |
# | D | D | U | D | 135 |
# | U | D | U | D | 150 |
# | D | U | U | D | 300 |
# | U | U | U | D | 600 |
# | D | D | D | U | 1200 |
# | U | D | D | U | 1800 |
# | D | U | D | U | 2400 |
# | U | U | D | U | 3600 |
# | D | D | U | U | 4800 |
# | U | D | U | U | 7200 |
# | D | U | U | U | 9600 |
# | U | U | U | U | 19200 |
# +-----+-----+-----+-----+-----------+
#
# TABLE 3:
# +-----+-----+-----+-----------+
# | 3 | 4 | 5 | Parity |
# +-----+-----+-----+-----------+
# | X | X | D | None |
# | D | D | U | Odd |
# | D | U | U | Even |
# | U | D | U | Mark |
# | U | U | U | Space |
# +-----+-----+-----+-----------+
# X = don't care
#
# CHART:
# +-----+-----+-----------------+
# | 7 | 8 | Communication |
# +-----+-----+-----------------+
# | D | D | Half Duplex |
# | D | U | Full Duplex |
# | U | D | Block |
# | U | U | Local |
# +-----+-----+-----------------+
#
# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
# should be present and all tvi native modes use the same string for this.
# Finally, note that BSD has cud1=^V. -- esr)
tvi950|televideo 950,
am, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, xmc#1,
acsc=d\rc\014e\nb\011i\013, bel=^G, cbt=\EI, clear=\E*,
cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
invis@,
is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\Ef\r,
kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
use=adm+sgr,
#
# is for 950 with two pages adds the following:
# set 48 line page (\E\\2)
# place cursor at page 0, line 24, column 1 (\E-07 )
# set local (no send) edit keys (\Ek)
#
# two page 950 adds the following:
# when entering ex, set 24 line page (\E\\1)
# when exiting ex, reset 48 line page (\E\\2)
# place cursor at 0,24,1 (\E-07 )
# set duplex (send) edit keys (\El) when entering vi
# set local (no send) edit keys (\Ek) when exiting vi
#
tvi950-2p|televideo950 w/2 pages,
is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\2\E-07 \011,
rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
smkx=\El,
use=tvi950,
#
# is for 950 with four pages adds the following:
# set 96 line page (\E\\3)
# place cursor at page 0, line 24, column 1 (\E-07 )
#
# four page 950 adds the following:
# when entering ex, set 24 line page (\E\\1)
# when exiting ex, reset 96 line page (\E\\3)
# place cursor at 0,24,1 (\E-07 )
#
tvi950-4p|televideo950 w/4 pages,
is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\3\E-07 \011,
rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
smkx=\El,
use=tvi950,
#
# <is2> for reverse video 950 changes the following:
# set reverse video (\Ed)
#
# set vb accordingly (\Ed ...delay... \Eb)
#
tvi950-rv|televideo950 rev video,
flash=\Ed$<200/>\Eb,
is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200, use=tvi950,
# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
tvi950-rv-2p|televideo950 rev video w/2 pages,
flash=\Ed$<200/>\Eb,
is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\2\E-07\s,
rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
smkx=\El,
use=tvi950,
# tvi950-rv uses the appropriate entries from 950-4p and 950-rv
tvi950-rv-4p|televideo950 rev video w/4 pages,
flash=\Ed$<200/>\Eb,
is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\200\200\Ex1\200\200\Ex2\200\200\011\Ex3\200\200\Ex4\r\200\E\\3\E-07\s,
rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
smkx=\El,
use=tvi950,
# From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
# the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
# the :ko: string had :cl: in it, which means that one of the original
# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
# the 950 has. Finally, corrected the <kel> string to match the 950 and what
# ko implies -- esr)
# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
# also work.
tvi955|televideo 955,
mc5i, msgr@,
it#8, xmc@,
acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
rmam=\E[=7l, rmxon=^N,
rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\200\E0p\E4\200\Ef\r,
sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
use=tvi950,
tvi955-w|955-w|televideo955 w/132 cols,
cols#132,
is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
# use half-intensity as normal mode, full intensity as <bold>
tvi955-hb|955-hb|televideo955 half-bright,
bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
sgr0=\EG0\E[=5h,
use=tvi955,
# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
# it does to the function keys. I deduced <rmam>/<smam>.
# also added empty <acsc> to suppress tic warning, -- esr)
tvi970|televideo 970,
am, da, db, mir, msgr,
cols#80, it#8, lines#24,
acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
smul=\E[4m, vpa=\E[%i%p1%dd,
tvi970-vb|televideo 970 with visual bell,
flash=\E[?5h\200\200\200\200\200\200\200\200\200\200\200\200\200\E[?5l, use=tvi970,
tvi970-2p|televideo 970 with using 2 pages of memory,
rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
use=tvi970,
# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
# per line (rather than 40), Esc K chooses the normal character set. Not sure
# padding is needed, but adapted from the tvi920c termcap. The <smso> and
# <smul> strings are klutzy, but at least use no screen space.
# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
# its absence means <smam>=\Ev isn't save to use. -- esr)
# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
# F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
tvipt|televideo personal terminal,
am,
cols#80, lines#24,
cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
tvi9065|televideo 9065,
am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
wnum#0, wsl#30,
acsc=0_'rjhkglfmeniopxjqksqtmulvown, bel=^G,
blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu=\E[%p1%dA, cuu1=^K,
cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
ip=$<3>,
is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
pfkey=\E|%p1%'0'%+%c3%p2%s\031,
pfloc=\E|%p1%'0'%+%c2%p2%s\031,
pfx=\E|%p1%'0'%+%c1%p2%s\031,
pln=\E_%p1%'?'%+%c%p2%s\r, prot=\E&,
rep=\E[%p2%db%p1%c, rev=\EG4,
rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
rmacs=\E%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
rmdc=\200, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\200\200\Ex1\200\200\Ex2\200\200\Ex3\200\200\Ex4\200\200\E1,
rs3=\E[=19h\E.3\E9\E0O\200\200\200\200\200\E0o\200\200\200\200\200\E0J\177\200\200\200\200,
sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
#### Visual (vi)
#
# In September 1993, Visual Technology of Westboro, Massachusetts,
# merged with White Pine Software of Nashua, New Hampshire.
#
# White Pine Software may be contacted at +1 603/886-9050.
# Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
#
# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
# Recently I hacked together the following termcap for Visual
# Technology's Visual 50 terminal. It's a slight modification of
# the vt52 termcap.
# It's intended to run when the Visual 50 is in vt52 emulation mode
# (I know what you're thinking; if it's emulating a vt52, then why
# another termcap? Well, it turns out that the Visual 50 can handle
# <dl1> and db(?) among other things, which the vt52 can't)
# The termcap works OK for the most part. The only problem is on
# character inserts. The whole line gets painfully redrawn for each
# character typed. Any suggestions?
# Beau's entry is combined with the vi50 entry from University of Wisconsin.
# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
# disguise; <kf7>-<kf9> are really l1-l3.
vi50|visual 50,
am, da, db, msgr,
cols#80, it#8, lines#24,
bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH, ht=^I,
il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, kf5=\EE,
kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, nel=^M^J,
ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
# this one was BSD & SCO's vi50
vi50adm|visual 50 in adm3a mode,
am, msgr,
cols#80, it#8, lines#24,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
rmso=\ET, smso=\EU,
# From: Jeff Siegal <jbs@athena.mit.edu>
vi55|Visual 55,
am, mir, msgr,
cols#80, it#8, lines#24,
clear=\Ev, csr=\E_%p1%'A'%+%c%p2%'A'%+%c, cub1=^H,
cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
smir=\Ea, smso=\EU,
# Visual 200 from BRL
# The following switch settings are assumed for normal operation:
# FULL_DUPLEX SCROLL CR
# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
# Other switches may be set for operator convenience or communication
# requirements.
# Character insertion is kludged in order to get around the "beep" misfeature.
# (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
# and <dl1> strings, but we seem to get along fine without them.
vi200|visual 200,
am, mir, msgr,
cols#80, it#8, lines#24,
acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
rmacs=\EG, rmkx=\E>, rmso=\E3,
rs1=\E3\Eb\Ej\E\\\El\EG\Ec\Ek\EX, sgr0=\E3\Eb,
smacs=\EF, smkx=\E=, smso=\E4, tbc=\Eg,
# The older Visuals didn't come with function keys. This entry uses
# <smkx> and <rmkx> so that the keypad keys can be used as function keys.
# If your version of vi doesn't support function keys you may want
# to use vi200-f.
vi200-f|visual 200 no function keys,
is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
use=vi200,
vi200-rv|visual 200 reverse video,
cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
# the function keys are programmable but we don't reprogram them to their
# default values with <is2> because programming them is very verbose. maybe
# an initialization file should be made for the 300 and they could be stuck
# in it.
# (vi300: added <rmam>/<smam> based on init string -- esr)
vi300|visual 300 ansi x3.64,
am, bw, mir, xenl,
cols#80, lines#24,
bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
il1=\E[L, ind=^J,
is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
smso=\E[1m, smul=\E[4m,
# some of the vi300s have older firmware that has the command
# sequence for setting editing extent reversed.
vi300-old|visual 300 with old firmware (set edit extent reversed),
is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
use=vi300,
# Visual 500 prototype entry from University of Wisconsin.
# The best place to look for the escape sequences is page A1-1 of the
# Visual 500 manual. The initialization sequence given here may be
# overkill, but it does leave out some of the initializations which can
# be done with the menus in set-up mode.
# The :xp: line below is so that emacs can understand the padding requirements
# of this slow terminal. :xp: is 10 time the padding factor.
# (vi500: removed unknown :xp#4: termcap;
# also added empty <acsc> to suppress tic warning -- esr)
vi500|visual 500,
am, mir, msgr,
cols#80, it#8, lines#33,
acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
ind=^J,
is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
# The visual 550 is a visual 300 with tektronix graphics,
# and with 33 lines. clear screen is modified here to
# also clear the graphics.
vi550|visual 550 ansi x3.64,
lines#33,
clear=\030\E[H\E[2J, use=vi300,
vi603|visual603|visual 603,
hs, mir,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
use=vt100,
#### Wyse (wy)
#
# Wyse Technology
# 3471 North First Street
# San Jose, CA 95134
# Vox: (408)-473-1200
# Fax: (408) 473-1222
# Web: http://www.wyse.com
#
# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
# obvious address, http://www.wyse.com.
#
# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
# They now own the Qume and Amdek brands, too. So these are the people to
# talk with about all Link, Qume, and Amdek terminals.
#
# Wyse has a BBS containing termcap and terminfo stuff for their terminals
# (though this may not last long -- I expect the Web will kill it off by
# mid-1997 or so). According to their tech support, at 800-800-9973, it's
# at 408-922-4400 thru 4405. The 4400 modem is flaky as of 5/96, so
# call 4401 etc. Come in at 9600 hard; don't use autospeed sense.
#
# All the following entries until (but not including) wy520 are direct from
# Wyse technical support and represent their best knowledge as of January 1995.
# I canceled the bel capacities in the vb entries.
# I made two trivial syntax fixes in the wyse30 entry.
# I made some entries relative to adm+sgr.
#
#
# Note: The wyse75, wyse85, and wyse99 have been discontinued.
# Although the Wyse 30 can support more than one attribute
# it requires magic cookies to do so. Many applications do not
# function well with magic cookies. The following terminfo uses
# the protect mode to support one attribute (dim) without cookies.
# If more than one attribute is needed then the wy30-mc terminfo
# should be used.
#
wy30|wyse30|Wyse 30,
am, bw, hs, mc5i, mir, msgr, xon,
cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
mc5=^X, nel=^M^J, pfx=\Ez%p1%'?'%+%c%p2%s\177,
pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
smso=\E`7\E), tbc=\E0, tsl=\EF,
#
# This terminal description uses the non-hidden attribute mode
# (with magic cookie).
#
# (wy30-mc: added <smcup> to suppress tic warning --esr)
wy30-mc|wyse30-mc|wyse 30 with magic cookies,
msgr@,
ma@, xmc#1,
blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
rmcup=\EG0,
sgr=\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
use=wy30, use=adm+sgr,
# The mandatory pause used by <flash> does not work with
# older versions of terminfo. If you see this effect then
# unset xon and delete the / from the delay.
# i.e. change $<100/> to $<100>
wy30-vb|wyse30-vb|wyse 30 visible bell,
bel@, use=wy30,
#
# The Wyse 50 can support one attribute (e.g. Dim, Inverse,
# Normal) without magic cookies by using the protect mode.
# The following description uses this feature, but when more
# than one attribute is put on the screen at once, all attributes
# will be changed to be the same as the last attribute given.
# The Wyse 50 can support more attributes when used with magic
# cookies. The wy50-mc terminal description uses magic cookies
# to correctly handle multiple attributes on a screen.
#
wy50|wyse50|Wyse 50,
am, bw, hs, mc5i, mir, msgr, xon,
cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
pfx=\Ez%p1%'?'%+%c%p2%s\177,
pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
sgr=%?%p1%p3%|%t\E`6\E)\n%e%p5%p8%|%t\E`7\E)%e\E(%;\n%?%p9%t\EH\002%e\EH\003%;,
sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
smso=\E`6\E), tbc=\E0, tsl=\EF,
#
# This terminal description uses the non-hidden attribute mode
# (with magic cookie).
#
# The mandatory pause used by flash does not work with some
# older versions of terminfo. If you see this effect then
# unset <xon> and delete the / from the delay.
# i.e. change $<100/> to $<100>
# (wy50-mc: added <smcup> to suppress tic warning --esr)
wy50-mc|wyse50-mc|wyse 50 with magic cookies,
msgr@,
ma@, xmc#1,
blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
rmcup=\EG0,
sgr=\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
smso=\EGt, use=wy50,
use=adm+sgr,
wy50-vb|wyse50-vb|wyse 50 visible bell,
bel@, use=wy50,
wy50-w|wyse50-w|wyse 50 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy50,
wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
bel@,
use=wy50-w,
#
# The Wyse 350 is a Wyse 50 with color.
# Unfortunately this means that it has magic cookies.
# The color attributes are designed to overlap the reverse, dim and
# underline attributes. This is nice for monochrome applications
# because you can make underline stuff green (or any other color)
# but for true color applications it's not so hot because you cannot
# mix color with reverse, dim or underline.
# To further complicate things one of the attributes must be
# black (either the foreground or the background). In reverse video
# the background changes color with black letters. In normal video
# the foreground changes colors on a black background.
# This terminfo uses some of the more advanced features of curses
# to display both color and blink. In the final analysis I am not
# sure that the wy350 runs better with this terminfo than it does
# with the wy50 terminfo (with user adjusted colors).
#
# The mandatory pause used by flash does not work with
# older versions of terminfo. If you see this effect then
# unset xon and delete the / from the delay.
# i.e. change $<100/> to $<100>
#
# Bug: The <op> capability resets attributes.
wy350|wyse350|Wyse 350,
am, bw, hs, mc5i, mir, xon,
colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
wsl#45, xmc#1,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
pfx=\Ez%p1%'?'%+%c%p2%s\177,
pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
setf=%?%p1%{0}%=%t%{76}\n%e%p1%{1}%=%t%{64}\n%e%p1%{2}%=%t%{8}\n%e%p1%{3}%=%t%{72}\n%e%p1%{4}%=%t%{4}\n%e%p1%{5}%=%t%{68}\n%e%p1%{6}%=%t%{12}\n%e%p1%{7}%=%t%{0}\n%;%PC\n\EG%gC%gA%+%'0'%+%c,
sgr=%{0}%?%p4%t%{2}%|%;\n%?%p7%t%{1}%|%;%PA\n\EG%?%gC%t%gC%e\n%{0}%?%p1%t%{4}%|%;\n%?%p2%t%{8}%|%;\n%?%p3%t%{4}%|%;\n%?%p5%t%{64}%|%;\n%;%gA%+%'0'%+%c\n%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF,
use=adm+sgr,
wy350-vb|wyse350-vb|wyse 350 visible bell,
bel@, use=wy350,
wy350-w|wyse350-w|wyse 350 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy350,
wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
bel@,
use=wy350-w,
#
# This terminfo description is untested.
# The wyse100 emulates an adm31, so the adm31 entry should work.
#
wy100|wyse 100,
hs, mir,
cols#80, lines#24, xmc#1,
bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
rmir=\Er, smir=\Eq, tsl=\EF,
use=adm+sgr,
#
# The Wyse 120/150 has most of the features of the Wyse 60.
# This terminal does not need padding up to 9600 baud!
# <msgr> should be set but the clear screen fails when in
# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
# then set <msgr>.
#
wy120|wyse120|wy150|wyse150|Wyse 120/150,
am, bw, hs, km, mc5i, mir, msgr, xon,
cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
acsc=+/\\\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
pfloc=\EZ2%p1%'?'%+%c%p2%s\177,
pfx=\EZ1%p1%'?'%+%c%p2%s\177,
pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
rs3=\EwG\Ee($<100>,
sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt,
smxon=\Ec21\ntbc=\E0, tsl=\EF, use=adm+sgr,
#
wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
rs2=\E`;$<70>, use=wy120,
#
wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy120,
#
wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
#
wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
bel@,
use=wy120,
#
wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
bel@,
use=wy120-w,
#
# The Wyse 60 is like the Wyse 50 but with more padding.
# The reset strings are slow and the pad times very depending
# on other parameters such as font loading. I have tried
# to follow the following outline:
#
# <rs1> -> set personality
# <rs2> -> set number of columns
# <rs3> -> set number of lines
# <is1> -> select the proper font
# <is2> -> do the initialization
# <is3> -> set up display memory (2 pages)
#
# The Wyse 60's that have vt100 emulation are slower than the
# older Wyse 60's. This change happened mid-1987.
# The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
#
# The meta key is only half right. This terminal will return the
# high order bit set when you hit CTRL-function_key
#
# It may be useful to assign two function keys with the
# values \E=(\s look at old data in page 1
# \E=W, look at bottom of page 1
# where \s is a space ( ).
#
# Note:
# The Wyse 60 runs faster when the XON/XOFF
# handshake is turned off.
#
# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
wy60|wyse60|Wyse 60,
am, bw, hs, km, mc5i, mir, msgr,
cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
acsc=+/\\\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
ip=$<3>, is1=\EcB0\EcC1,
is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
pfloc=\EZ2%p1%'?'%+%c%p2%s\177,
pfx=\EZ1%p1%'?'%+%c%p2%s\177,
pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
tbc=\E0, tsl=\EF,
use=adm+sgr,
#
wy60-w|wyse60-w|wyse 60 132-column,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
rs2=\EeF$<150>\E`;$<150>, use=wy60,
#
wy60-25|wyse60-25|wyse 60 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy60,
wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
#
wy60-42|wyse60-42|wyse 60 80-column 42-lines,
lines#42,
clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
ri=\Ej$<10>, rs3=\Ee*$<150>,
use=wy60,
wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
cols#132, lw#7, nlab#16, wsl#97,
clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>,
use=wy60-42,
#
wy60-43|wyse60-43|wyse 60 80-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy60-42,
wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy60-42-w,
#
wy60-vb|wyse60-vb|Wyse 60 visible bell,
bel@, use=wy60,
wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
bel@,
use=wy60-w,
# The Wyse-99GT looks at lot like the Wyse 60 except that it
# does not have the 42/43 line mode. In the Wyse-60 the "lines"
# setup parameter controls the number of lines on the screen.
# For the Wyse 99GT the "lines" setup parameter controls the
# number of lines in a page. The screen can display 25 lines max.
# The Wyse-99GT also has personalities for the VT220 and
# Tektronix 4014. But this has no bearing on the native mode.
#
# (msgr) should be set but the clear screen fails when in
# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
# then set msgr, else use msgr@.
#
# u0 -> enter Tektronix mode
# u1 -> exit Tektronix mode
#
wy99gt|wyse99gt|Wyse 99gt,
msgr@,
clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
u0=\E~>\E8, u1=\E[42h,
use=wy60,
#
wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
cols#132, lw#7, nlab#16, wsl#97,
clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, use=wy99gt,
#
wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
#
wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs2=\E`;$<150>, use=wy99gt-w,
#
wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
bel@, use=wy99gt,
#
wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
bel@,
use=wy99gt-w,
#
# The Wyse 160 is combination of the WY-60 and the WY-99gt.
# The reset strings are slow and the pad times very depending
# on other parameters such as font loading. I have tried
# to follow the following outline:
#
# <rs1> -> set personality
# <rs2> -> set number of columns
# <rs3> -> set number of lines
# <is1> -> select the proper font
# <is2> -> do the initialization
# <is3> -> set up display memory (2 pages)
#
# The display memory may be used for either text or graphics.
# When "Display Memory = Shared" the terminal will have more pages
# but garbage may be left on the screen when you switch from
# graphics to text. If "Display Memory = Unshared" then the
# text area will be only one page long.
#
# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
wy160|wyse160|Wyse 160,
am, bw, hs, km, mc5i, mir, msgr,
cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
acsc=+/\\\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
pfloc=\EZ2%p1%'?'%+%c%p2%s\177,
pfx=\EZ1%p1%'?'%+%c%p2%s\177,
pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
tbc=\E0, tsl=\EF,
use=adm+sgr,
#
wy160-w|wyse160-w|wyse 160 132-column,
cols#132, lw#7, nlab#16, wsl#90,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
rs2=\EeF$<150>\E`;$<150>, use=wy160,
#
wy160-25|wyse160-25|wyse 160 80-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy160,
wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
#
wy160-42|wyse160-42|wyse 160 80-column 42-lines,
lines#42,
clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
rs3=\Ee*$<150>,
use=wy160,
wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
cols#132, lw#7, nlab#16, wsl#90,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
rs2=\EeF$<150>\E`;$<150>,
use=wy160-42,
#
wy160-43|wyse160-43|wyse 160 80-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy160-42,
wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\Ee+$<150>, use=wy160-42-w,
#
wy160-vb|wyse160-vb|Wyse 160 visible bell,
bel@, use=wy160,
wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
bel@,
use=wy160-w,
#
# The Wyse 75 is a vt100 lookalike without advanced video.
#
# The Wyse 75 can support one attribute (e.g. Dim, Inverse,
# Underline) without magic cookies. The following description
# uses this capability, but when more than one attribute is
# put on the screen at once, all attributes will be changed
# to be the same as the last attribute given.
# The Wyse 75 can support more attributes when used with magic
# cookies. The wy75-mc terminal description uses magic cookies
# to correctly handle multiple attributes on a screen.
#
wy75|wyse75|wyse 75,
am, hs, mc5i, mir, msgr, xenl, xon,
cols#80, lines#24, ma#1, pb#1201, wsl#78,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
dl1=\E[M, dsl=\E[>\\\,\001\001\E[>-\001\001,
ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E)0, flash=\E[30h\E\\\,\E[30l$<250>, fsl=^A,
home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
ind=\n$<2>, ip=$<1>,
is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
is2=\E>\E(B\E)0\017, is3=\E[m, ka1=\EOw, ka3=\EOy,
kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, kent=\EOM,
kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
sc=\E7,
sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
tbc=\E[3g, tsl=\E[>\\\,\001,
#
# This terminal description uses the non-hidden attribute mode
# (with magic cookie).
#
wy75-mc|wyse75-mc|wyse 75 with magic cookies,
msgr@,
ma@, xmc#1,
blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
use=wy75,
wy75-vb|wyse75-vb|wyse 75 with visible bell,
pb@,
bel@, use=wy75,
wy75-w|wyse75-w|wyse 75 in 132 column mode,
cols#132, wsl#130,
rs2=\E[35h\E[?3h$<80>, use=wy75,
wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
pb@,
bel@, use=wy75-w,
#
# Wyse 85 emulating a vt220 7 bit mode.
# 24 line screen with status line.
#
# The vt220 mode permits more function keys but it wipes out
# the escape key. I strongly recommend that <f11> be set to
# escape (esc).
# The terminal may have to be set for 8 data bits and 2 stop
# bits for the arrow keys to work.
# The Wyse 85 runs faster with XON/XOFF enabled. Also the
# <dch> and <ich> work best when XON/XOFF is set. <ich> and
# <dch> leave trash on the screen when used without XON/XOFF.
#
wy85|wyse85|wyse 85,
am, hs, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
enacs=\E)0, flash=\E[30h\E\\\,\E[30l$<300>,
fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf1=\EOP,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p,
rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7,
sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[40h\E7\E[25;%i%p1%dH,
#
# Wyse 85 with visual bell.
wy85-vb|wyse85-vb|wyse 85 with visible bell,
bel@, flash=\E[30h\E\\\,\E[30l$<300>, use=wy85,
#
# Wyse 85 in 132-column mode.
wy85-w|wyse85-w|wyse 85 in 132-column mode,
cols#132, wsl#132,
rs2=\E[35h\E[?3h$<70>, use=wy85,
#
# Wyse 85 in 132-column mode with visual bell.
wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
bel@,
use=wy85-w,
#
# Wyse 185 emulating a vt320 7 bit mode.
#
# This terminal always displays 25 lines. These lines may be used
# as 24 data lines and a terminal status line (top or bottom) or
# 25 data lines. The 48 and 50 line modes change the page size
# and not the number of lines on the screen.
#
# The Compose Character key can be used as a meta key if changed
# by set-up.
#
wy185|wyse185|wyse 185,
am, hs, km, mc5i, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
el=\E[K, el1=\E[1K, enacs=\E)0,
flash=\E[30h\E\\\,\E[30l$<100>, fsl=\E[1;24r\E8,
home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
kbs=^H, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM,
kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<2>,
rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, rmkx=\E>,
rmso=\E[27m, rmul=\E[24m,
rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
#
# Wyse 185 with 24 data lines and top status (terminal status)
wy185-24|wyse185-24|wyse 185 with 24 data lines,
hs@,
dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy185,
#
# Wyse 185 with visual bell.
wy185-vb|wyse185-vb|wyse 185+flash,
bel@, use=wy185,
#
# Wyse 185 in 132-column mode.
wy185-w|wyse185-w|wyse 185 in 132-column mode,
cols#132, wsl#132,
dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
ip=$<7>, rs2=\E[35h\E[?3h,
use=wy185,
#
# Wyse 185 in 132-column mode with visual bell.
wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
bel@, use=wy185-w,
# wy325 terminfo entries
# Done by Joe H. Davis 3-9-92
# lines 25 columns 80
#
wy325|wyse325|Wyse epc,
am, bw, hs, mc5i, mir,
cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
acsc=+/\\\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
mc0=\EP, mc4=^T, mc5=\Ed#,
pfloc=\EZ2%p1%'?'%+%c%p2%s\177,
pfx=\EZ1%p1%'?'%+%c%p2%s\177,
pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
rs3=\EwG\Ee($<100>,
sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%'0'%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
tsl=\EF,
use=adm+sgr,
#
# lines 24 columns 80 vb
#
wy325-vb|wyse325-vb|wyse-325 with visual bell,
bel@, use=wy325,
#
# lines 24 columns 132
#
wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
cols#132, lw#7, nlab#16, wsl#97,
cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
rs2=\E`;$<70>, use=wy325,
#
# lines 25 columns 80
#
wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325,
#
# lines 25 columns 132
#
wy325-25w|wyse325-25w|wy325 132 columns,
lh@, lines#25, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
# lines 25 columns 132 vb
#
wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
bel@,
use=wy325-w,
#
# lines 42 columns 80
#
wy325-42|wyse325-42|wyse-325 42 lines,
lh@, lines#42, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325,
#
# lines 42 columns 132
#
wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
lh@, lines#42, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
# lines 42 columns 132 vb
#
wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
bel@,
use=wy325-w,
#
# lines 43 columns 80
#
wy325-43|wyse325-43|wyse-325 43 lines,
lh@, lines#43, lw@, nlab@,
pln@, use=wy325,
#
# lines 43 columns 132
#
wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
lh@, lines#43, lw@, nlab@,
pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
#
# lines 43 columns 132 vb
#
wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
bel@,
use=wy325-w,
# Wyse 370 -- 24 line screen with status line.
#
# The terminal may have to be set for 8 data bits and 2 stop
# bits for the arrow keys to work.
#
# If you change keyboards the terminal will send different
# escape sequences.
# The following definition is for the basic terminal without
# function keys.
#
# <u0> -> enter Tektronix 4010/4014 mode
# <u1> -> exit Tektronix 4010/4014 mode
# <u2> -> enter ASCII mode (from any ANSI mode)
# <u3> -> exit ASCII mode (goto native ANSI mode)
# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
# <u5> -> exit Tek 4207 mode (goto native ANSI mode)
#
# Bug: The <op> capability resets attributes.
wy370-nk|wyse 370 without function keys,
am, ccc, hs, mc5i, mir, msgr, xenl, xon,
colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
flash=\E[30h\E\\\,\E[30l$<300>, fsl=\E[1;24r\E8,
home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
ind=\n$<2>,
initc=\E[66;%p1%d;\n%?%p2%{250}%<%t%{0}\n%e%p2%{500}%<%t%{16}\n%e%p2%{750}%<%t%{32}%e%{48}%;\n%?%p3%{250}%<%t%{0}\n%e%p3%{500}%<%t%{4}\n%e%p3%{750}%<%t%{8}%e%{12}%;\n%?%p4%{250}%<%t%{0}\n%e%p4%{500}%<%t%{1}\n%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
mc5=\E[5i,
oc=\E[60w\E[63;0w\n\E[66;1;4w\n\E[66;2;13w\n\E[66;3;16w\n\E[66;4;49w\n\E[66;5;51w\n\E[66;6;61w\n\E[66;7;64w,
op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
#
# Function key set for the ASCII (wy-50 compatible) keyboard
# This is the default 370.
#
wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
knp=\E[U, kpp=\E[V,
use=wy370-nk,
#
# Function key set for the VT-320 (and wy85) compatible keyboard
#
wy370-105k|Wyse 370 with 105 key keyboard,
ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[3~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
use=wy370-nk,
#
# Function key set for the PC compatible keyboard
#
wy370-EPC|Wyse 370 with 102 key keyboard,
kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V,
use=wy370-nk,
#
# Wyse 370 with visual bell.
wy370-vb|Wyse 370 with visible bell,
bel@, use=wy370,
#
# Wyse 370 in 132-column mode.
wy370-w|Wyse 370 in 132-column mode,
cols#132, wsl#132,
rs2=\E[35h\E[?3h$<70>, use=wy370,
#
# Wyse 370 in 132-column mode with visual bell.
wy370-wvb|Wyse 370 with visible bell 132-columns,
flash=\E[30h\E\\\,\E[30l$<300>,
use=wy370-w,
wy370-rv|Wyse 370 reverse video,
rs3=\E[32h\E[?5h, use=wy370,
#
# Wyse 99gt Tektronix 4010/4014 emulator,
#
wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
am, os,
cols#74, lines#35,
bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
cup=\035%{3040}%{89}%p1%*%-%Py\n%p2%{55}%*%Px\n%gy%{128}%/%{31}%&%{32}%+%c\n%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c\n%gy%{004}%/%{31}%&%{96}%+%c\n%gx%{128}%/%{31}%&%{32}%+%c\n%gx%{004}%/%{31}%&%{64}%+%c\037,
cuu1=^K, ff=^L,
hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
home=^]7`x @\037,
hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
#
# Wyse 160 Tektronix 4010/4014 emulator,
#
wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
cup=\035%{3103}%{91}%p1%*%-%Py\n%p2%{55}%*%Px\n%gy%{128}%/%{31}%&%{32}%+%c\n%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c\n%gy%{004}%/%{31}%&%{96}%+%c\n%gx%{128}%/%{31}%&%{32}%+%c\n%gx%{004}%/%{31}%&%{64}%+%c\037,
home=^]8`g @\037,
use=wy99gt-tek,
#
# Wyse 370 Tektronix 4010/4014 emulator,
#
wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
am, os,
cols#80, lines#36,
bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
cup=\035%{775}%{108}%p1%*%{5}%/%-%Py\n%p2%{64}%*%{4}%+%{5}%/%Px\n%gy%{32}%/%{31}%&%{32}%+%c\n%gy%{31}%&%{96}%+%c\n%gx%{32}%/%{31}%&%{32}%+%c\n%gx%{31}%&%{64}%+%c\037,
cuu1=^K, ff=^L,
hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
home=^]8g @\037,
hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
# Vendor-supplied Wyse entries end here.
#
#TITLE: TERMINFO ENTRY WY520
#DATE: 8/5/93
# The WY520 terminfo is based on the WY285 entry published on the WYSE
# BBS with the addition of more function keys and special keys.
#
# rs1 -> set personality
# rs2 -> set number of columns
# rs3 -> set number of lines
# is1 -> select the proper font
# is2 -> do the initialization
# is3 -> If this string is empty then rs3 gets sent.
#
# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
# - The BS key is programmed to generate BS in smcup since
# is2 doesn't seem to work.
# - Remove and shift/Remove: delete a character
# - Insert : enter insert mode
# - Find : delete to end of file
# - Select : clear a line
# - F11, F12, F13: send default sequences (not ESC, BS, LF)
# - F14 : Home key
# - Bottom status line (host writable line) is used.
# - smkx,rmkx are removed because this would put the numeric
# keypad in Dec application mode which doesn't seem to work
# with SCO applications.
#
wy520|wyse520|wyse 520,
am, hs, km, mc5i, mir, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOu, kb2=\EOy,
kbs=^H, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
kel=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
rmso=\E[m, rmul=\E[24m,
rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
vpa=\E[%i%p1%dd,
#
# Wyse 520 with 24 data lines and status (terminal status)
wy520-24|wyse520-24|wyse 520 with 24 data lines,
hs@,
dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520,
#
# Wyse 520 with visual bell.
wy520-vb|wyse520-vb|wyse 520 with visible bell,
flash=\E[30h\E\\\,\E[30l$<100>, use=wy520,
#
# Wyse 520 in 132-column mode.
wy520-w|wyse520-w|wyse 520 in 132-column mode,
cols#132, wsl#132,
dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
ip=$<7>, rs2=\E[35h\E[?3h,
use=wy520,
#
# Wyse 520 in 132-column mode with visual bell.
wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
flash=\E[30h\E\\\,\E[30l$<100>,
use=wy520-w,
#
#
# Wyse 520 emulating a vt420 7 bit mode.
# The DEL key is programmed to generate BS in is2.
# With EPC keyboard.
# - 'End' key will clear till end of line on EPC keyboard
# - Shift/End : ignored.
# - Insert : enter insert mode.
# - Delete : delete a character (have to change interrupt character
# to CTRL-C: stty intr '^c') for it to work since the
# Delete key sends 7FH.
wy520-epc|wyse520-epc|wyse 520 with EPC kb,
kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
use=wy520,
#
# Wyse 520 with 24 data lines and status (terminal status)
# with EPC keyboard.
wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines,
hs@,
dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520-epc,
#
# Wyse 520 with visual bell.
wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell,
flash=\E[30h\E\\\,\E[30l$<100>,
use=wy520-epc,
#
# Wyse 520 in 132-column mode.
wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode,
cols#132, wsl#132,
dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
ip=$<7>, rs2=\E[35h\E[?3h,
use=wy520-epc,
#
# Wyse 520 in 132-column mode with visual bell.
wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns,
flash=\E[30h\E\\\,\E[30l$<100>,
use=wy520-epc-w,
#
# Wyse 520 in 80-column, 36 lines
wy520-36|wyse520-36|wyse 520 with 36 data lines,
hs@,
lines#36,
dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520,
#
# Wyse 520 in 80-column, 48 lines
wy520-48|wyse520-48|wyse 520 with 48 data lines,
hs@,
lines#48,
dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520,
#
# Wyse 520 in 132-column, 36 lines
wy520-36w|wyse520-36w|wyse 520 with 36 data lines,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36,
#
# Wyse 520 in 132-column, 48 lines
wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48,
#
#
# Wyse 520 in 80-column, 36 lines with EPC keyboard
wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines,
hs@,
lines#36,
dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520-epc,
#
# Wyse 520 in 80-column, 48 lines with EPC keyboard
wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines,
hs@,
lines#48,
dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520-epc,
#
# Wyse 520 in 132-column, 36 lines with EPC keyboard
wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36pc,
#
# Wyse 520 in 132-column, 48 lines with EPC keyboard
wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines,
cols#132, wsl#132,
rs2=\E[?3h,
rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48pc,
# From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
# file and we don't know what <hts> is -- esr)
wyse-vp|wyse|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
am,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
smul=^N,
wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
use=wy75,
# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
wy100q|Wyse 100 for Quotron,
cols#80, lines#24, xmc#1,
cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
is2=\E`\:\200\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq,
use=adm+sgr,
#### Kermit terminal emulations
#
# Obsolete Kermit versions may be listed in the section describing obsolete
# non-ANSI terminal emulators later in the file.
#
# KERMIT standard all versions.
# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
# From: greg small <gts@populi.berkeley.edu> 9-25-84
kermit|standard kermit,
cols#80, lines#24,
clear=\EE, cub1=^H, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
kermit-am|standard kermit plus auto-margin,
am,
is2=K1 Standard Kermit plus Automatic Margins\n, use=kermit,
# IBMPC Kermit 1.2.
# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
# line).
# From: greg small <gts@populi.berkeley.edu> 8-30-84
pckermit|pckermit12|UCB IBMPC Kermit 1.2,
am,
lines#25,
clear=\EH\EJ, ed@, el@,
is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
# IBMPC Kermit 1.20
# Cannot use line 25, now acts funny like ansi special scrolling region.
# Initialization must escape from that region by cursor position to line 24.
# Cannot use character insert because 1.20 goes crazy if insert at col 80.
# Does not use :am: because autowrap is lost when kermit dropped and restarted.
# From: greg small <gts@populi.berkeley.edu> 12-19-84
pckermit120|UCB IBMPC Kermit 1.20,
it#8, lines#24,
cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
il1=\EL,
is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
rmir@, rmso=\Eq, smir@, smso=\Ep,
use=kermit,
# MS-DOS Kermit 2.27 for the IBMPC
# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
# Cannot use line 25, now acts funny like ansi special scrolling region.
# Initialization must escape from that region by cursor position to line 24.
# Does not use am: because autowrap is lost when kermit dropped and restarted.
# Reverse video for standout like H19.
# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
# From: greg small <gts@populi.berkeley.edu> 3-17-85
msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
am@,
cols#80, it#8, lines#24,
clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
home=\EH, ht=^I, il1=\EL,
is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
# MS-DOS Kermit 2.27 with automatic margins
# From: greg small <gts@populi.berkeley.edu> 3-17-85
msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
am,
cvvis=\EO\Eq\EG\EvK5,
is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n, use=msk227,
# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
# Automatic margins now default. Use ansi <sgr> for highlights.
# Define function keys.
# (msk22714: removed obsolete ":kn#10:" -- esr)
# From: greg small <gts@populi.berkeley.edu> 3-17-85
msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
am,
bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smso=\E[1m, smul=\E[4m,
use=mskermit227,
# This was designed for a VT320 emulator, but it is probably a good start
# at support for the VT320 itself.
# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
vt320-k3|MS-Kermit 3.00's vt320 emulation,
am, eslok, hs, km, mir, msgr, xenl,
cols#80, it#8, lines#49, pb#9600, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p1%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p1%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E4i\E?4i\E[m\E[r\E[2$~,
sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
vt320-k311|dec vt320 series as defined by kermit 3.11,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
######## NON-ANSI TERMINAL EMULATIONS
#
#### Avatar
#
# These entries attempt to describe Avatar, a terminal emulation used with
# MS-DOS bulletin-board systems. It was designed to give ANSI-like
# capabilities, but with cheaper (shorter) control sequences. Messy design,
# excessively dependent on PC idiosyncracies, but apparently rather popular
# in the BBS world.
#
# No color support. Avatar doesn't fit either of the Tektronix or HP color
# models that terminfo knows about. An Avatar color attribute is the
# low 7 bits of the IBM-PC display-memory attribute. Bletch.
#
# I wrote these entries while looking at the Avatar spec. I don't have
# the facilities to test them. Let me know if they work, or don't.
#
# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
# tell ncurses that the corresponding highlights exist; it should use <sgr>,
# which is the only method that will actually work for multiple highlights.)
avatar0|avatar terminal emulator level 0,
am, bce, msgr,
cols#80, it#8, lines#25,
blink=^A^V\177, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
ind=^J, invis=^V^A\200, rep=\031%p1%c%p2%d, rev=^A^Vp,
rs2=^L,
sgr=\026\001%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p4%t{128}%|%;%?%p6%t%{16}%|%;,
sgr0=^V^A^G, smacs=, smso=^A^Vp, smul=^V^A,
use=klone+acs,
# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
avatar0+|avatar terminal emulator level 0+,
dch1=^V^N, rmir=\026\n\200\200\200\200, smir=^V^I, use=avatar0,
# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
avatar|avatar1|avatar terminal emulator level 1,
civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
rmam=^V", rmir=^V^P, smam=^V$,
use=avatar0+,
######## OLDER TERMINAL TYPES
#
# This section is devoted to older commercial terminal brands that are now
# discontinued, but known to be still in use or represented by emulations.
#
#### AT&T (att, tty)
#
# This section also includes Teletype-branded VDTs.
#
# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
# Boundless Technologies); for details, see the header comment on the ADDS
# section.
#
# These are AT&T's official terminfo entries. All-caps aliases have been
# removed.
#
att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
am, eo, mir, msgr, xon,
cols#80, it#8, lines#24,
bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
smso=\E[7m,
att2350|AT&T 2350 Video Information Terminal 80 column mode,
mc0@, mc4@, mc5@,
use=att2300,
# Must setup RETURN KEY - CR, REC'VD LF - INDEX.
# Seems upward compatible with vt100, plus ins/del line/char.
# On sgr, the protection parameter is ignored.
# No check is made to make sure that only 3 parameters are output.
# standout= reverse + half-intensity = 3 | 5.
# bold= reverse + underline = 2 | 3.
# note that half-bright blinking doesn't look different from normal blinking.
# NOTE:you must program the function keys first, label second!
# (att4410: a BSD entry has been seen with the following capabilities:
# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
am, hs, mir, msgr, xon,
cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
acsc=``aaffhhggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~00++--\,\,..,
bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
ll=\E[24H, nel=^M^J,
pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
tsl=\E7\E[25;%p1%{1}%+%dH,
att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
cols#132, wsl#132,
is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s,
use=att5410v1,
att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
cols#132, wsl#132,
is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
# 5410 in terms of a vt100
# (v5410: added <rmam>/<smam> based on init string -- esr)
v5410|att5410 in terms of a vt100,
am, mir, msgr, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
il1=\E[L, ind=^J, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H,
kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\EOx,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv,
kf8=\EOl, kf9=\EOw, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
#
# Teletype Model 5420 -- A souped up 5410, with multiple windows,
# even! the 5420 has three modes: scroll, window or page mode
# this terminfo should work in scroll or window mode, but doesn't
# take advantage of any of the differences between them.
#
# Has memory below (2 lines!)
# 3 pages of memory (plus some spare)
# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
# <hpa>, <hts> would work for these, but these work in both scroll and window
# mode... Unset insert character so insert mode works
# <is1> sets 80 column mode,
# <is2> escape sequence:
# 1) turn off all fonts
# 2) function keys off, keyboard lock off, control display off,
# insert mode off, erasure mode off,
# 3) full duplex, monitor mode off, send graphics off, nl on lf off
# 4) reset origin mode
# 5) set line wraparound
# 6) exit erasure mode, positional attribute mode, and erasure extent mode
# 7) clear margins
# 8) program ENTER to transmit ^J,
# We use \212 to program the ^J because a bare ^J will get translated by
# UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
# 1 2 3 4 5 6 7 8
# <is3> set screen color to black,
# No representation in terminfo for the delete word key: kdw1=\Ed
# Key capabilities assume the power-up send sequence...
# This <rmcup> is not strictly necessary, but it helps maximize
# memory usefulness: <rmcup=\Ez>,
# Alternate sgr0: <sgr0=\E[m\EW^O>,
# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
# smkx programs the SYS PF keys to send a set sequence.
# It also sets up labels f1, f2, ..., f8, and sends edit keys.
# This string causes them to send the strings <kf1>-<kf8>
# when pressed in SYS PF mode.
# (att4415: I added <rmam>/<smam> based on the init string -- esr)
att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
db, mir, xon,
lh#2, lm#78, lw#8, nlab#8, wsl#55,
cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
flash=\E[?5h$<200>\E[?5l, home=\E[x,
hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
use=att4410,
att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
cols#132, lm#54, wsl#97,
is1=\E[?3h$<100>, use=att4415,
att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
flash=\E[?5l$<200>\E[?5h, is3=\E[?5h,
use=att4415,
att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
cols#132, lm#54, wsl#97,
flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, use=att4415,
# Note that this mode permits programming USER PF KEYS and labels
# However, when you program user pf labels you have to reselect
# user pf keys to make them appear!
att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
use=att4415+nl, use=att4415,
att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
use=att4415+nl, use=att4415-rv,
att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
use=att4415+nl, use=att4415-w,
att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
use=att4415+nl, use=att4415-w-rv,
att5420_2|AT&T 5420 model 2 80 cols,
am, db, hs, mir, msgr, xon,
cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
invis=\E[8m,
is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
smso=\E[7m, smul=\E[4m, tbc=\E[3g,
tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
att5420_2-w|AT&T 5420 model 2 in 132 column mode,
cols#132,
is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, use=att5420_2,
att4418|att5418|AT&T 5418 80 cols,
am, xon,
cols#80, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%, kcub1=\E@,
kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
att4418-w|att5418-w|AT&T 5418 132 cols,
cols#132,
is1=\E[?3h, use=att5418,
att4420|tty4420|teletype 4420,
da, db, eo, msgr, ul, xon,
cols#80, lines#24, lm#72,
bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
# The following is a terminfo entry for the Teletype 4424
# asynchronous keyboard-display terminal. It supports
# the vi editor. The terminal must be set up as follows,
#
# HIGHLIGHT DEFINITION 3-TONE
# DISPLAY FUNCTION GROUP III
#
# The second entry below provides limited (a la adm3a)
# operation under GROUP II.
#
# This must be used with DISPLAY FUNCTION GROUP I or III
# and HIGHLIGHT DEFINITION 3-TONE
# The terminal has either bold or blink, depending on options
#
# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
att4424|tty4424|teletype 4424,
am, xon,
cols#80, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
rmul=\EZ,
sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
tbc=\EF,
att4424-1|tty4424-1|teletype 4424 in display function group I,
kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
use=att4424,
# This entry is not one of AT&T's official ones, it was translated from the
# 4.4BSD termcap file. The highlight strings are different from att4424.
# I have no idea why this is -- older firmware version, maybe?
# The following two lines are the comment originally attached to the entry:
# This entry appears to avoid the top line - I have no idea why.
# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
att4424m|tty4424m|teletype 4424M,
am, da, db, mir,
cols#80, it#8, lines#23,
bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smso=\E[7m, smul=\E[4m,
# The Teletype 5425 is really version 2 of the Teletype 5420. It
# is quite similar, except for some minor differences. No page
# mode, for example, so all of the <cup> sequences used above have
# to change back to what's being used for the 5410. Many of the
# option settings have changed their numbering as well.
#
# This has been tested on a preliminary model.
#
# (att5425: added <rmam>/<smam> based on the init string -- esr)
att5425|tty5425|att4425|AT&T 4425/5425,
am, da, db, hs, mir, msgr, xenl, xon,
cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
invis=\E[8m, is1=\E<\E[?3l$<100>,
is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
nel=^M^J,
pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
vpa=\E[%p1%{1}%+%dd,
att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
smkx=\E[21;1j\E[25;4j\Eent,
use=att4425,
att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
cols#132, lm#54, wsl#97,
is1=\E[?3h$<100>, use=tty5425,
# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
# I also added <rmam>/<smam> -- esr)
att4426|tty4426|teletype 4426S,
am, da, db, xon,
cols#80, lines#24, lm#48,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%p1%dd,
# Terminfo entry for the AT&T 510 A Personal Terminal
# Function keys 9 - 16 are available only after the
# screen labeled (soft keys/action blocks) are labeled. Function key
# 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
#
# This entry is based on one done by Ernie Rice at Summit, NJ and
# changed by Anne Gallup, Skokie, IL, ttrdc!anne
att510a|bct510a|AT&T 510A Personal Terminal,
am, mir, msgr, xenl, xon,
cols#80, lh#2, lines#24, lw#7, nlab#8,
acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b,
bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
# Terminfo entry for the AT&T 510 D Personal Terminal
# Function keys 9 through 16 are accessed by bringing up the
# system blocks.
# Function key 9 corresponds to the leftmost touch target on the screen,
# function key 16 corresponds to the rightmost.
#
# There are problems with soft key labeling. These are due to
# strangenesses in the native terminal that are impossible to
# describe in a terminfo.
att510d|bct510d|AT&T 510D Personal Terminal,
am, da, db, mir, msgr, xenl, xon,
cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b,
bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
pln=\E[%p1%dp%p2%:-16s, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
rs2=\E[5;0|, sc=\E7,
sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
# (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
att500|att513|AT&T 513 using page mode,
am, chts, mir, msgr, xenl, xon,
cols#80, lh#2, lines#24, lw#8, nlab#8,
acsc=hrisjjkkllmmnnqqttuuvvwwxx{{||}}~~-f\,h.e+g`b,
bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
indn=\E[%p1%dE, invis=\E[8m,
is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
nel=\EE,
pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
pln=\E[%p1%dp%p2%:-16s, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
rmul=\E[m,
rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
rs2=\E[5;0|, sc=\E7,
sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smir=\E[4h,
smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
# 01-07-88
# printer must be set to EMUL ANSI to accept ESC codes
# <cuu1> stops at top margin
# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
# and alt font ascii,wrap on,tabs cleared
# <is2> disables newline on LF,Emphasized off
# The <u0> capability sets form length
att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
xhpa, xvpa,
bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
orhi#100, orl#12, orvi#72,
cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
cr=^M,
csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
rshm=\E[m,
scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
u0=\E[%p1%dt, vpa=\E[%p1%dd,
# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
# The following SET-UP modes are assumed for normal operation:
# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
# Other SET-UP modes may be set for operator convenience or communication
# requirements. This termcap description is for the Resident Terminal Mode.
# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# The BRL entry also said: UNSAFE :ll=\E[70H:
att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
am, xon,
cols#88, it#8, lines#70, vt#3,
bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
rs1=\Ec, sc=\E7,
# 5620 terminfo (2.0 or later ROMS with char attributes)
# The following SET-UP modes are assumed for normal operation:
# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
# Other SET-UP modes may be set for operator convenience or communication
# requirements. This termcap description is for Resident Terminal Mode. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# assumptions: <ind> (scroll forward one line) is only done at screen bottom
# Be aware that older versions of the dmd have a firmware bug that affects
# parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
# <msgr> is from an otherwise inferior BRL for this terminal. That entry
# also has <ll>=\E[70H commented out and marked unsafe.
# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
am, msgr, npc, xon,
cols#88, it#8, lines#70,
bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
lines#24, use=att5620,
att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
lines#34, use=att5620,
# 5620 layer running the "S" system's downloaded graphics handler:
att5620-s|tty5620-s|layer|vitty|5620 S layer,
am,
cols#80, it#8, lines#72,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
kll=\E[70;1H,
# Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
#
# Entries for <kf29> thru <kf46> refer to the alternate keypad mode
# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
att605|AT&T 605 80 column 102key keyboard,
am, eo, xon,
cols#80, lines#24, lw#8, nlab#8, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
il1=\E[L, ind=^J, invis=\E[8m,
is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
tsl=\E7\E[25;%i%p1%dx,
att605-pc|ATT 605 in pc term mode,
acsc=k\277l\332m\300j\331n\305w\302q\304u\264t\303v\301x\263,
cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
dch1=\E[P, dl1=\E[M, ich1=\E[@, il=\E[L, il1=\E[L, kcbt=\E[Z,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
xonc=e,
use=att605,
att605-w|AT&T 605-w 132 column 102 key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
# (att610: I added <rmam>/<smam> based on the init string. I also
# added <indn> and <rin> because the BSD file says the att615s have them,
# and the 615 is like a 610 with a big keyboard, and most of their other
# smart terminals support the same sequence -- esr)
att610|AT&T 610; 80 column; 98key keyboard,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
indn=\E[%p1%dS, invis=\E[8m,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
nel=\EE,
pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
att610-w|AT&T 610; 132 column; 98key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att610,
att610-103k|AT&T 610; 80 column; 103key keyboard,
kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
kslt=\ENI, kspd=\EOp, kund=\EOs,
use=att610,
att610-103k-w|AT&T 610; 132 column; 103key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att610-103k,
att615|AT&T 615; 80 column; 98key keyboard,
kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM,
use=att610,
att615-w|AT&T 615; 132 column; 98key keyboard,
kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM,
use=att610-w,
att615-103k|AT&T 615; 80 column; 103key keyboard,
kLFT=\E[ A, kRIT=\E[ @,
use=att610-103k,
att615-103k-w|AT&T 615; 132 column; 103key keyboard,
kLFT=\E[ A, kRIT=\E[ @,
use=att610-103k-w,
# (att620: I added <rmam>/<smam> based on the init string and
# <rin>/<indn> from a BSD termcap -- esr)
att620|AT&T 620; 80 column; 98key keyboard,
am, eslok, hs, mir, msgr, xenl, xon,
cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
indn=\E[%p1%dS, invis=\E[8m,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
rs2=\Ec\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
tsl=\E7\E[25;%i%p1%dx,
att620-w|AT&T 620; 132 column; 98key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att620,
att620-103k|AT&T 620; 80 column; 103key keyboard,
kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs,
use=att620,
att620-103k-w|AT&T 620; 132 column; 103key keyboard,
cols#132, wsl#132,
is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att620-103k,
# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
# The following SETUP modes are assumed for normal operation:
# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
# Font_Size=Large Non-Layers_Window_Cols=80
# Non-Layers_Window_Rows=60
# Other SETUP modes may be set for operator convenience or communication
# requirements. Some capabilities assume a printer attached to the Aux EIA
# port. This termcap description is for the Fixed Non-Layers Window. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
att630|AT&T 630 windowing terminal,
am, da, db, mir, msgr, npc, xon,
cols#80, it#8, lines#60, lm#0,
bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
rmul=\E[m, rs2=\Ec, sc=\E7,
sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
lines#24, use=att630,
# This entry was modified 3/13/90 by JWE.
# fixes include additions of <enacs>, correcting <rep>, and modification
# of <kHOM>. (See comments below)
# att730 has status line of 80 chars
# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
# the <kf25> and up keys are used for shifted system Fkeys
# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
# and 122 key keyboards, the 730's translation is \E[2J. For consistency
# <kHOM> has been commented out. The user can uncomment <kHOM> if using the
# 102, 102+1, or 122 key keyboards
# kHOM=\E[2J,
# (att730: I added <rmam>/<smam> based on the init string -- esr)
att730|AT&T 730 windowing terminal,
am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
ind=\ED, invis=\E[8m,
is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
lines#41, use=att730,
att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
lines#24, use=att730,
att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
flash=\E[?5l$<200>\E[?5h,
is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
lines#41, use=att730r,
att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
lines#24, use=att730r,
# The following represents the screen layout along with the associated
# bezel buttons for the 5430/pt505 terminal. The "kf" designations do
# not appear on the screen but are shown to reference the bezel buttons.
# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
# position relative to the screen.
#
#
#
# +----------------------------------------------------------------+
# | |
# XXXX | kf0 kf24 | XXXX
# | |
# | |
# XXXX | kf1 kf23 | XXXX
# | |
# | |
# XXXX | kf2 kf22 | XXXX
# | |
# | |
# XXXX | kf3 kf21 | XXXX
# | |
# | |
# XXXX | kf4 kf20 | XXXX
# | |
# | |
# XXXX | kf5 kf19 | XXXX
# | |
# | |
# XXXX | kf6 kf18 | XXXX
# | |
# | |
# XXXX | | XXXX
# | |
# | |
# +----------------------------------------------------------------+
#
# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
#
# Note: XXXX represents the screen buttons
# CMD REDRAW
#
# MAIL
#
# version 1 note:
# The character string sent by key 'kf26' may be user programmable
# to send either \E[16s, or \E[26s.
# The character string sent by key 'krfr' may be user programmable
# to send either \E[17s, or \E[27s.
#
# Depression of the "CMD" key sends \E! (kcmd)
# Depression of the "MAIL" key sends \E[26s (kf26)
# "REDRAW" same as "REFRESH" (krfr)
#
# "kf" functions adds carriage return to output string if terminal is in
# 'new line' mode.
#
# The following are functions not covered in the table above:
#
# Set keyboard character (SKC): \EPn1;Pn2w
# Pn1= 0 Back Space key
# Pn1= 1 Break key
# Pn2= Program char (hex)
#
# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
# Pn1= Window number (1-39)
# Pn2-Pn5= Y;X;Y;X coordinates
#
# Screen Selection (SSL): \E[Pnu
# Pn= Window number
#
# Set Terminal Modes (SM): \E[Pnh
# Pn= 3 Graphics mode
# Pn= > Cursor blink
# Pn= < Enter new line mode
# Pn= = Enter reverse insert/replace mode
# Pn= ? Enter no scroll mode
#
# Reset Terminal Mode (RM): \E[Pnl
# Pn= 3 Exit graphics mode
# Pn= > Exit cursor blink
# Pn= < Exit new line mode
# Pn= = Exit reverse insert/replace mode
# Pn= ? Exit no scroll mode
#
# Screen Status Report (SSR): \E[Pnp
# Pn= 0 Request current window number
# Pn= 1 Request current window dimensions
#
# Device Status Report (DSR): \E[6n Request cursor position
#
# Call Status Report (CSR): \E[Pnv
# Pn= 0 Call failed
# Pn= 1 Call successful
#
# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
# Pn1= Button number to be loaded
# Pn2= Character count of "string"
# Pn3= Key mode being loaded:
# 0= Unshifted
# 1= Shifted
# 2= Control
# String= Text string (15 chars max)
#
# Screen Number Report (SNR): \E[Pnp
# Pn= Screen number
#
# Screen Dimension Report (SDR): \E[Pn1;Pn2r
# Pn1= Number of rows available in window
# Pn2= Number of columns available in window
#
# Cursor Position Report (CPR): \E[Pn1;Pn2R
# Pn1= "Y" Position of cursor
# Pn2= "X" Position of cursor
#
# Request Answer Back (RAB): \E[c
#
# Answer Back Response (ABR): \E[?;*;30;VSV
# *= 0 No printer available
# *= 2 Printer available
# V= Software version number
# SV= Software sub version number
# (printer-available field not documented in v1)
#
# Screen Alignment Aid: \En
#
# Bell (lower pitch): \E[x
#
# Dial Phone Number: \EPdstring\
# string= Phone number to be dialed
#
# Set Phone Labels: \EPpstring\
# string= Label for phone buttons
#
# Set Clock: \EPchour;minute;second\
#
# Position Clock: \EPsY;X\
# Y= "Y" coordinate
# X= "X" coordinate
#
# Delete Clock: \Epr\
#
# Programming The Function Buttons: \EPfPn;string\
# Pn= Button number (00-06, 18-24)
# (kf00-kf06, kf18-kf24)
# string= Text to sent on button depression
#
# The following in version 2 only:
#
# Request For Local Directory Data: \EPp12;\
#
# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
#
# Request for Local Directory Data in print format: \EPp13;\
#
# Enable 'Prt on Line' mode: \022 (DC2)
#
# Disable 'Prt on Line' mode: \024 (DC4)
#
# 05-Aug-86:
# The following Terminfo entry describes functions which are supported by
# the AT&T 5430/pt505 terminal software version 2 and later.
att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
am, xon,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E2K, home=\E[H, ht=^I,
il=\E[%p1%dL, il1=\E[L, ind=^J,
is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
kf22=\E[22s, kf23=\E[23s, kf24=\E24s, kf26=\E26s,
kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
# The following Terminfo entry describes functions which are supported by
# the AT&T 5430/pt505 terminal software version 1.
att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
lines#24,
mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
lines#22, use=att505,
#
# -------------------- TERMINFO FILE CAN BE SPLIT HERE -----------------------
# This cut mark helps make life less painful for people running ncurses tic
# on machines with relatively little RAM. The file can be broken in half here
# cleanly and compiled in sections -- no `use' references cross this cut
# going forward.
#
#### Ampex (Dialogue)
#
# Yes, these are the same people who are better-known for making audio- and
# videotape. I'm told they are located in Redwood City, CA.
#
# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
# (ampex80: some capabilities merged in from SCO's entry -- esr)
ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
am, bw, ul,
cols#80, it#8, lines#24,
bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
smso=\Ej, smul=\El, tbc=\E3,
# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
ampex175|ampex d175,
am,
cols#80, lines#24,
bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
# No backspace key in the main QWERTY cluster. Fortunately, it has a
# NEWLINE/PAGE key just above RETURN that sends a strange single-character
# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
# mode), this key can be used as the erase key; I find I like this. Because
# some people and some systems may not, there is another termcap ("ampex175")
# that suppresses this little eccentricity by omitting the relevant capability.
ampex175-b|ampex d175 using left arrow for erase,
kbs=^_,
use=ampex175,
# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
# (ampex210: removed obsolete ":kn#10:" -- esr)
ampex210|a210|ampex a210,
am, hs, xenl,
cols#80, it#8, lines#24, xmc#1,
cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
if=/usr/share/tabset/std, il1=\EE, invis@,
is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
# and moved the padding to be *after* the caps -- esr)
ampex219|ampex-219|amp219|Ampex with Automargins,
hs, xenl,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
ampex219w|ampex-219w|amp219w|Ampex 132 cols,
cols#132, lines#24,
bel=^G, cr=^M, cud1=^J, ind=^J,
is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
ampex232|ampex-232|Ampex Model 232,
am,
cols#80, lines#24, xmc#1,
cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
kf9=^AI\r, khome=^^,
use=adm+sgr,
# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
ampex232w|Ampex Model 232 / 132 columns,
cols#132, lines#24,
is2=\E\034Eg\El, use=ampex232,
#### Ann Arbor (aa)
#
# Ann Arbor made dream terminals for hackers -- large screen sizes and huge
# numbers of function keys. At least some used monitors in portrait mode,
# allowing up to 76-character screen heights! They were reachable at:
#
# Ann Arbor Terminals
# 6175 Jackson Road
# Ann Arbor, MI 48103
# (313)-663-8000
#
# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
# can't be found on the Web; I fear they're long dead. R.I.P.
#
# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
# Highly modified 6/22 by Mike O'Brien.
# split out into several for the various screen sizes by dave-yost@rand
# Modifications made 3/82 by Mark Horton
# Modified by Tom Quarles at UCB for greater efficiency and more diversity
# status line moved to top of screen, <flash> removed 5/82
# Some unknown person at SCO then hacked the init strings to make them more
# efficient.
#
# assumes the following setup:
# A menu: 0000 1010 0001 0000
# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
# C menu: 56 66 0 0 9600 0110 1100
# D menu: 0110 1001 1 0
#
# Briefly, the settings are for the following modes:
# (values are for bit set/clear with * indicating our preference
# and the value used to test these termcaps)
# Note that many of these settings are irrelevent to the terminfo
# and are just set to the default mode of the terminal as shipped
# by the factory.
#
# A menu: 0000 1010 0001 0000
# Block/underline cursor*
# blinking/nonblinking cursor*
# key click/no key click*
# bell/no bell at column 72*
#
# key pad is cursor control*/key pad is numeric
# return and line feed/return for <cr> key *
# repeat after .5 sec*/no repeat
# repeat at 25/15 chars per sec. *
#
# hold data until pause pressed/process data unless pause pressed*
# slow scroll/no slow scroll*
# Hold in area/don't hold in area*
# functions keys have default*/function keys disabled on powerup
#
# show/don't show position of cursor during page transmit*
# unused
# unused
# unused
#
# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
# Baud rate (9600*)
#
# 2 bits of parity - 00=odd,01=even*,10=space,11=mark
# 1 stop bit*/2 stop bits
# parity error detection off*/on
#
# keyboard local/on line*
# half/full duplex*
# disable/do not disable keyboard after data transmission*
#
# transmit entire page/stop transmission at cursor*
# transfer/do not transfer protected characters*
# transmit all characters/transmit only selected characters*
# transmit all selected areas/transmit only 1 selected area*
#
# transmit/do not transmit line separators to host*
# transmit/do not transmit page tab stops tabs to host*
# transmit/do not transmit column tab stop tabs to host*
# transmit/do not transmit graphics control (underline,inverse..)*
#
# enable*/disable auto XON/XOFF control
# require/do not require receipt of a DC1 from host after each LF*
# pause key acts as a meta key/pause key is pause*
# unused
#
# unused
# unused
# unused
# unused
#
# XON character (17*)
# XOFF character (19*)
#
# C menu: 56 66 0 0 9600 0110 1100
# number of lines to print data on (printer) (56*)
#
# number of lines on a sheet of paper (printer) (66*)
#
# left margin (printer) (0*)
#
# number of pad chars on new line to printer (0*)
#
# printer baud rate (9600*)
#
# printer parity: 00=odd,01=even*,10=space,11=mark
# printer stop bits: 2*/1
# print/do not print guarded areas*
#
# new line is: 01=LF,10=CR,11=CRLF*
# unused
# unused
#
# D menu: 0110 1001 1 0
# LF is newline/LF is down one line, same column*
# wrap to preceding line if move left from col 1*/don't wrap
# wrap to next line if move right from col 80*/don't wrap
# backspace is/is not destructive*
#
# display*/ignore DEL character
# display will not/will scroll*
# page/column tab stops*
# erase everything*/erase unprotected only
#
# editing extent: 0=display,1=line*,2=field,3=area
#
# unused
#
annarbor4080|aa4080|ann arbor 4080,
am,
cols#80, lines#40,
bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%'@'%+%c,
cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
# Strange Ann Arbor terminal from BRL
aas1901|Ann Arbor K4080 w/S1901 mod,
am,
cols#80, lines#40,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\200c,
nel=^M^J,
# If you're using the GNU termcap library, add
# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
# to these capabilities. This is the nonstandard GNU termcap scrolling
# capability, arguments are:
# 1. Total number of lines on the screen.
# 2. Number of lines above desired scroll region.
# 3. Number of lines below (outside of) desired scroll region.
# 4. Total number of lines on the screen, the same as the first parameter.
# The generic Ann Arbor entry is the only one that uses this.
aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
am, km, mc5i, mir, xon,
cols#80, it#8,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[m,
smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
vpa=\E[%p1%{1}%+%dd,
aaa+rv|ann arbor ambassador in reverse video,
blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
rs1=\E[H\E[7m\E[J$<156>,
sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
# Ambassador with the DEC option, for partial vt100 compatibility.
aaa+dec|ann arbor ambassador in dec vt100 mode,
acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
smacs=^O,
aaa-18|ann arbor ambassador/18 lines,
lines#18,
is2=\E7\E[60;0;0;18p\E8,
rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p, use=aaa+unk,
aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
use=aaa+rv, use=aaa-18,
aaa-20|ann arbor ambassador/20 lines,
lines#20,
is2=\E7\E[60;0;0;20p\E8,
rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p, use=aaa+unk,
aaa-22|ann arbor ambassador/22 lines,
lines#22,
is2=\E7\E[60;0;0;22p\E8,
rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p, use=aaa+unk,
aaa-24|ann arbor ambassador/24 lines,
lines#24,
is2=\E7\E[60;0;0;24p\E8,
rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p, use=aaa+unk,
aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
use=aaa+rv, use=aaa-24,
aaa-26|ann arbor ambassador/26 lines,
lines#26,
is2=\E7\E[60;0;0;26p\E8,
rmcup=\E[60;0;0;26p\E[26;1H\E[K,
smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
aaa-28|ann arbor ambassador/28 lines,
lines#28,
is2=\E7\E[60;0;0;28p\E8,
rmcup=\E[60;0;0;28p\E[28;1H\E[K,
smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
eslok, hs,
lines#29,
dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
rmcup=\E[60;1;0;30p\E[29;1H\E[K,
smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
tsl=\E[>51h\E[1;%p1%dH\E[2K,
use=aaa+unk,
aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
use=aaa+rv, use=aaa-30-s,
aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
rmcup=\E[60;1;0;30p\E[59;1H\E[K,
smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context,
rmcup=\E[60;1;0;30p\E[59;1H\E[K,
smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
lines#30,
is2=\E7\E[60;0;0;30p\E8,
rmcup=\E[60;0;0;30p\E[30;1H\E[K,
smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
use=aaa+rv, use=aaa-30,
aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
use=aaa-30,
aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
use=aaa+rv, use=aaa-30,
aaa-36|ann arbor ambassador/36 lines,
lines#36,
is2=\E7\E[60;0;0;36p\E8,
rmcup=\E[60;0;0;36p\E[36;1H\E[K,
smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
use=aaa+rv, use=aaa-36,
aaa-40|ann arbor ambassador/40 lines,
lines#40,
is2=\E7\E[60;0;0;40p\E8,
rmcup=\E[60;0;0;40p\E[40;1H\E[K,
smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
use=aaa+rv, use=aaa-40,
aaa-48|ann arbor ambassador/48 lines,
lines#48,
is2=\E7\E[60;0;0;48p\E8,
rmcup=\E[60;0;0;48p\E[48;1H\E[K,
smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
use=aaa+rv, use=aaa-48,
aaa-60-s|ann arbor ambassador/59 lines+status,
eslok, hs,
lines#59,
dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
tsl=\E[>51h\E[1;%p1%dH\E[2K,
use=aaa+unk,
aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
use=aaa+rv, use=aaa-60-s,
aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
use=aaa+dec, use=aaa+rv, use=aaa-60-s,
aaa-60|ann arbor ambassador/60 lines,
lines#60,
is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, use=aaa+unk,
aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
use=aaa+rv, use=aaa-60,
aaa-db|ann arbor ambassador 30/destructive backspace,
cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h,
use=aaa-30,
guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
lines#33,
flash=\E[>59h$<100>\E[>59l,
is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p,
use=aaa+unk,
guru+rv|guru changes for reverse video,
flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
use=guru+rv, use=guru-33,
guru+s|guru status line,
eslok, hs,
dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
tsl=\E[>51h\E[1;%p1%dH\E[2K,
guru-nctxt|guru with no saved context,
smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
guru-s|guru-33-s|ann arbor guru/33 lines+status,
lines#32,
is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
smcup=\E[33;1p\E[255;1H\E[K,
use=guru+s, use=guru+unk,
guru-24|ann arbor guru 24 lines,
cols#80, lines#24,
is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p, use=guru+unk,
guru-44|ann arbor guru 44 lines,
cols#97, lines#44,
is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p, use=guru+unk,
guru-44-s|ann arbor guru/44 lines+status,
lines#43,
is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
smcup=\E[44;1p\E[255;1H\E[K,
use=guru+s, use=guru+unk,
guru-76|guru with 76 lines by 89 cols,
cols#89, lines#76,
is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p, use=guru+unk,
guru-76-s|ann arbor guru/76 lines+status,
cols#89, lines#75,
is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
smcup=\E[76;1p\E[255;1H\E[K,
use=guru+s, use=guru+unk,
guru-76-lp|guru-lp|guru with page bigger than line printer,
cols#134, lines#76,
is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p, use=guru+unk,
guru-76-w|guru 76 lines by 178 cols,
cols#178, lines#76,
is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p, use=guru+unk,
guru-76-w-s|ann arbor guru/76 lines+status+wide,
cols#178, lines#75,
is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
smcup=\E[76;1p\E[255;1H\E[K,
use=guru+s, use=guru+unk,
guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
cols#178, lines#76,
is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p, use=guru+unk,
aaa-rv-unk|ann arbor unknown type,
lh#0, lw#0, nlab#0,
blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
rs1=\E[H\E[7m\E[J,
sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
#### Applied Digital Data Systems (adds)
#
# ADDS itself is long gone. ADDS was bought by NCR, and the same group made
# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
# terminals was merged again. Then AT&T sold the terminal business to
# SunRiver, which later changed its name to Boundless Technologies. The
# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
# as of early 1995) are at:
#
# Boundless Technologies
# 100 Marcus Boulevard
# Hauppauge, NY 11788-3762
# Vox: (800)-231-5445
# Fax: (516)-342-7378
#
# Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
# In 1995 Boundless acquired DEC's terminals business.
#
# Regent: lowest common denominator, works on all regents.
# (regent: renamed ":bc:" to ":le:" -- esr)
regent|Adds Regent Series,
am,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
home=\EY\s\s, ind=^J, ll=^A,
# Regent 100 has a bug where if computer sends escape when user is holding
# down shift key it gets confused, so we avoid escape.
regent100|Adds Regent 100,
xmc#1,
bel=^G, cup=\013%p1%{32}%+%c%p2%p2%{6}%*%+\020%c,
kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
sgr0=\E0@, smso=\E0P, smul=\E0`,
use=regent,
regent20|Adds Regent 20,
bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, use=regent,
regent25|Adds Regent 25,
bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, use=regent20,
regent40|Adds Regent 40,
xmc#1,
bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
smul=\E0`,
use=regent25,
regent40+|Adds Regent 40+,
is2=\EB, use=regent40,
regent60|regent200|Adds Regent 60,
dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
use=regent40+,
# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
viewpoint|addsviewpoint|adds viewpoint,
am,
cols#80, lines#24,
bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
# Some viewpoints have bad ROMs that foo up on ^O
screwpoint|adds viewpoint with ^O bug,
cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
# The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
# underline=01100000, rev=01010000, blink=01000010,dim=01000001,
# invis=01000100 and %c is the logical or of desired attributes.
# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
vp3a+|viewpoint3a+|adds viewpoint 3a+,
am, bw,
cols#80, it#8, lines#24,
civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M, cub1=^H, cud1=^J,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, kbs=^H, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, nel=^M^J, rmso=\E(,
sgr=\E0%'@'%?%p1%tQ%|%;%?%p2%t%'`'%|%;%?%p3%tP%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%?%p7%tD%|%;%c\E),
sgr0=\E(, smso=\E0Q\E),
vp60|viewpoint60|addsvp60|adds viewpoint60,
use=regent40,
#
# adds viewpoint 90 - from cornell
# Note: emacs sends ei occasionally to insure the terminal is out of
# insert mode. This unfortunately puts the viewpoint90 IN insert
# mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
# - :ei=:im=: must be present in the termcap translation.)
# - <xhp> indicates glitch that attributes stick to location
# - <msgr> means it's safe to move in standout mode
# - <clear=\EG\Ek>: clears screen and visual attributes without affecting
# the status line
# Function key and label capabilities merged in from SCO.
vp90|viewpoint90|adds viewpoint 90,
bw, msgr, xhp,
cols#80, lines#24,
clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
# Note: if return acts weird on a980, check internal switch #2
# on the top chip on the CONTROL pc board.
adds980|a980|adds consul 980,
am,
cols#80, lines#24,
bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
cuf1=\E^E01, cup=\013%p1%'@'%+%c\E\005%p2%2d,
dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
#### C. Itoh Electronics
#
# As of 1995 these people no longer make terminals (they're still in the
# printer business). Their terminals were all clones of the DEC VT series.
# They're located in Orange County, CA.
#
# CIT 80 - vt-52 emulator, the termcap has been modified to remove
# the delay times and do an auto tab set rather than the indirect
# file used in vt100.
cit80|cit-80|citoh 80,
am,
cols#80, lines#24,
clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
cit101|citc|C.itoh fast vt100,
am, xenl,
cols#80, lines#24,
bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m,
# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
# The following termcap entry was created from the Callan cd100 entry. The
# last two lines (with the capabilities in caps) are used by RM-cobol to allow
# full selection of combinations of reverse video, underline, and blink.
# (cit101e: emoved unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
cit101e|C. Itoh CIT-101e,
am, mir, msgr,
cols#80, it#8, lines#24,
acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
smkx=\E=, smso=\E[7m, smul=\E[4m,
cit101e-n|CIT-101e w/o am,
am@,
cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
cit101e-132|CIT-101e, 132 cols,
cols#132,
kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
cit101e-n132|CIT-101e, 132 cols w/o am,
am@,
cols#132,
cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
# CIE Terminals CIT-500 from BRL
# The following SET-UP modes are assumed for normal operation:
# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
# Other SET-UP modes may be set for operator convenience or communication
# requirements.
# Hardware tabs are assumed to be set every 8 columns; they can be set up
# by the "reset", "tset", or "tabs" utilities. No delays are specified; use
# "stty ixon -ixany" to enable DC3/DC1 flow control!
# (cit500: I added <rmam>/<smam> based on the init string -- esr)
cit500|CIE Terminals CIT-500,
mir, msgr, xon,
cols#80, it#8, lines#64, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
rmso=\E[m, rmul=\E[m,
rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
# C. Itoh printers begin here
citoh|ci8510|8510|c.itoh 8510a,
cols#80, it#8,
bold=\E!, cub1@,
is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
smul=\EX,
use=lpr,
citoh-pica|citoh in pica,
is1=\EN, use=citoh,
citoh-elite|citoh in elite,
cols#96,
is1=\EE,
is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089., use=citoh,
citoh-comp|citoh in compressed,
cols#136,
is1=\EQ,
is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129., use=citoh,
# citoh has infinite cols because we don't want lp ever inserting \n\t**.
citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
cols#32767,
is1=\EP, use=citoh,
citoh-6lpi|citoh in 6 lines per inch mode,
is3=\EA, use=citoh,
citoh-8lpi|citoh in 8 lines per inch mode,
lines#88,
is3=\EB, use=citoh,
#### Control Data (cdc)
#
cdc456|cdc 456 terminal,
am,
cols#80, lines#24,
bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
el=^V, home=^Y, il1=\EL, ind=^J,
# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
cdc721|CDC Viking,
am,
cols#80, lines#24,
clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
kcuu1=^W, khome=^Y,
cdc721ll|CDC Vikingll,
am,
cols#132, lines#24,
clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
kcuu1=^W, khome=^Y,
# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
cdc752|CDC 752,
am, bw, xhp,
cols#80, lines#24,
bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
# CDC 756
# The following switch/key settings are assumed for normal operation:
# 96 chars SCROLL FULL duplex not BLOCK
# Other switches may be set according to communication requirements.
# Insert/delete-character cannot be used, as the whole display is affected.
# "so" & "se" are commented out until jove handles "sg" correctly.
cdc756|CDC 756,
am, bw,
cols#80, lines#24,
bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
rs1=\031\030\002\003\017,
#
# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
#
# Part of the long initialization string defines the "DOWN" key to the left
# of the tab key to send an ESC. The real ESC key is positioned way out
# in right field.
#
# The termcap won't work in 132 column mode due to the way it it moves the
# cursor. Termcap doesn't have the capability (as far as I could tell) to
# handle the 721 in 132 column mode.
#
# (cdc721: changed :ri: to :sr: -- esr)
cdc721-esc|Control Data 721,
am, bw, msgr, xon,
cols#80, it#8, lines#30,
bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\\\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
smso=^^D, smul=^\, tbc=^^^RY,
#### Getronics
#
# Getronics is a Dutch electronics company that at one time was called
# `Geveke' and made async terminals; but (according to the company itself!)
# they've lost all their documentation on the command set. The hardware
# documentation suggests the terminals were actually manufactured by a
# Taiwanese electronics company named Cal-Comp. There are known
# to have been at least two models, the 33 and the 50.
#
# The 50 seems to be a top end vt220 clone, with the addition of a higher
# screen resolution, a larger screen, at least 1 page of memory above and
# below the screen, apparently pages of memory right and left of the screen
# which can be panned, and about 75 function keys (15 function keys x normal,
# shift, control, func A, func B). It also has more setup possibilities than
# the vt220. The monitor case is dated November 1978 and the keyboard case is
# May 1982.
#
# The vt100 emulation works as is. The entry below describes the rather
# non-conformant (but more featureful) ANSI mode.
#
# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
visa50|geveke visa 50 terminal in ansi 80 character mode,
bw, mir, msgr,
cols#80, lines#25,
acsc=0_aaffggjjkkllmmnnqqttuuvvwwxxh ooss, bel=^G,
blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
lf3=A insert line, lf4=A delete line, lf5=A clear,
lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
vpa=\E[%i%p1%dd,
#### Human Designed Systems (Concept)
#
# Human Designed Systems
# 400 Fehley Drive
# King of Prussia, PA 19406
# Vox: (610)-277-8300
# Fax: (610)-275-5739
# Net: support@hds.com
#
# John Martin <john@hds.com> is their termcap expert. They're mostly out of
# the character-terminal business now (1995) and making X terminals. In
# particular, the whole `Concept' line described here was discontinued long
# ago.
#
# From: <vax135!hpk> Sat Jun 27 07:41:20 1981
# Extensive changes to c108 by arpavax:eric Feb 1982
# Some unknown person at SCO then translated it to terminfo.
#
# There seem to be a number of different versions of the C108 PROMS
# (with bug fixes in its Z-80 program).
#
# The first one that we had would lock out the keyboard of you
# sent lots of short lines (like /usr/dict/words) at 9600 baud.
# Try that on your C108 and see if it sends a ^S when you type it.
# If so, you have an old version of the PROMs.
#
# You should configure the C108 to send ^S/^Q before running this.
# It is much faster (at 9600 baud) than the c100 because the delays
# are not fixed.
# new status line display entries for c108-8p:
# <is3> - init str #3 - setup term for status display -
# set programmer mode, select window 2, define window at last
# line of memory, set bkgnd stat mesg there, select window 0.
#
# <tsl> - to status line - select window 2, home cursor, erase to
# end-of-window, 1/2 bright on, goto(line#0, col#?)
#
# <fsl> - from status line - 1/2 bright off, select window 0
#
# <dsl> - disable status display - set bkgnd status mesg with
# illegal window #
#
# There are probably more function keys that should be added but
# I don't know what they are.
#
# No delays needed on c108 because of ^S/^Q handshaking
#
c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
rmcup=\Ev \001\177p\Ep\r\n,
use=c108-4p,
c108-4p|concept108-4p|concept 108 w/4 pages,
eslok, hs, xon,
pb@,
acsc=l\\qLkTxUmMjE, cnorm=\Ew, cr=^M,
cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
ind=^J, is1=\EK\E!\E F,
is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
smcup=\EU\Ev 8p\Ep\r\E\025,
tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
use=c108-rv-4p,
c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
use=c108-4p,
c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
cols#132,
is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
# Concept 100:
# These have only window relative cursor addressing, not screen
# relative. To get it to work right here, smcup/rmcup (which
# were invented for the concept) lock you into a one page
# window for screen style programs.
#
# To get out of the one page window, we use a clever trick:
# we set the window size to zero ("\Ev " in rmcup) which the
# terminal recognizes as an error and resets the window to all
# of memory.
#
# This trick works on c100 but does not on c108, sigh.
#
# Some tty drivers use cr3 for concept, others use nl3, hence
# the delays on cr and ind below. This padding is only needed at
# 9600 baud and up. One or the other is commented out depending on
# local conventions.
#
# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
# less than 6 but more than 2 will work.
#
# Note: can't use function keys f7-f10 because they are
# indistinguishable from arrow keys (!), also, del char and
# clear eol use xon/xoff so they probably won't work very well.
#
# Also note that we don't define insrt/del char/delline/eop/send
# because they don't transmit unless we reset them - I figured
# it was a bad idea to clobber their definitions.
#
# The <mc5> sequence changes the escape character to ^^ so that
# escapes will be passed through to the printer. Only trouble
# is that ^^ won't be - ^^ was chosen to be unlikely.
# Unfortunately, if you're sending raster bits through to be
# plotted, any character you choose will be likely, so we lose.
#
# \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
# cannot be # in is2 because it will hang a c100 with no printer
# if sent twice.
c100|concept100|concept|c104|c100-4p|hds concept 100,
am, eo, mir, ul, xenl,
cols#80, lines#24, pb#9600, vt#8,
bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
cub1=^H, cud1=^J, cuf1=\E=,
cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
is1=\EK,
is2=\EU\Ef\E7\E5\E8\El\ENH\E\200\Eo&\200\Eo'\E\Eo!\200\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
kri=\E\\, krmir=\E\200, mc4=\036o \E\EQ!\EYP\027,
mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
rmso=\Ed, rmul=\Eg, sgr0=\EN@,
smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
smso=\ED, smul=\EG,
c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
smso=\EE,
use=c100,
oc100|oconcept|c100-1p|old 1 page concept 100,
in,
is3@, use=c100,
# <ht> through <el> included to specify padding needed in raw mode.
# (avt-ns: added empty <acsc> to suppress a tic warning --esr)
avt-ns|concept avt no status line,
am, eo, mir, ul, xenl, xon,
cols#80, it#8, lines#24, lm#192,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
invis=\E8m, ip=$<4>, is1=\E[=103l\E[=205l,
is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n, rmir=\E4l,
rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{, sc=\E7,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
smir=\E1, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
avt-rv-ns|concept avt in reverse video mode/no status line,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
use=avt-ns,
avt-w-ns|concept avt in 132 column mode/no status line,
is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
use=avt-ns,
avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
smcup=\E[H\E[1;24;1;132w,
use=avt-ns,
# Concept AVT with status line. We get the status line using the
# "Background status line" feature of the terminal. We swipe the
# first line of memory in window 2 for the status line, keeping
# 191 lines of memory and 24 screen lines for regular use.
# The first line is used instead of the last so that this works
# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
# assumes an 8 page AVT but lm isn't currently used anywhere.)
#
avt+s|concept avt status line changes,
eslok, hs,
lm#191,
dsl=\E[0*w, fsl=\E[1;1!w,
is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
tsl=\E[2;1!w\E[;%p1%dH\E[2K,
avt|avt-s|concept-avt|avt w/80 columns,
use=avt+s, use=avt-ns,
avt-rv|avt-rv-s|avt reverse video w/sl,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, use=avt+s,
use=avt-ns,
avt-w|avt-w-s|concept avt 132 cols+status,
is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, use=avt+s,
use=avt-ns,
avt-w-rv|avt-w-rv-s|avt wide+status+rv,
flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
smcup=\E[H\E[1;24;1;132w,
use=avt+s, use=avt-ns,
#### Contel Business Systems.
#
# Contel c300 and c320 terminals.
contel300|contel320|c300|Contel Business Systems C-300 or C-320,
am, in, xon,
cols#80, lines#24, xmc#1,
bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
rmso=\E!\200, sgr0=\E!\200, smso=\E!\r, tbc=\E3,
# Contel c301 and c321 terminals.
contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
flash@, ich1@, ip@, rmso=\E!\200$<20>, smso=\E!\r$<20>,
use=contel300,
#### Data General (dg)
#
# According to James Carlson <carlson@xylogics.com> writing in January 1995,
# the terminals group at Data General was shut down in 1991; all these
# terminals have thus been discontinued.
#
# According to the 4.4BSD termcap file, the dg200 <cup> should be the
# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
# maybe they were originally nuls (which would fit).
dg200|data general dasher 200,
am, bw,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
smso=^^D, smul=^T,
# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
dg210|dg-ansi|Data General 210/211,
am,
cols#80, lines#24,
clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, nel=\r\E[H\E[A\n,
rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m, smul=\E[4;m,
# From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
# courtesy of Carlos Rucalde of Vantage Software, Inc.
# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
# I suspect the d200 function keys actually work on the dg211, check it out.)
dg211|Data General d211,
cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
rmso=\036E$<\200/>, smcup=^L^R, smso=\036D$<5/>,
use=dg200,
# dg450 from cornell
dg450|dg6134|data general 6134,
cub1@, cuf1=^X, use=dg200,
# Note: lesser Dasher terminals will not work with vi because vi insists upon
# having a command to move straight down from any position on the bottom line
# and scroll the screen up, or a direct vertical scroll command. The 460 and
# above have both, the D210/211, for instance, has neither. We must use ANSI
# mode rather than DG mode because standard UNIX tty drivers assume that ^H is
# backspace on all terminals. This is not so in DG mode.
# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
# grounds that there is no matching ":ml:"
# fixed garbled ":k9=\E[00\:z:" capability -- esr)
dg460-ansi|Data General Dasher 460 in ANSI-mode,
am, msgr, ul,
cols#80, it#8, lines#24,
blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[001z,
kf1=\E[002z, kf2=\E[003z, kf3=\E[004z, kf4=\E[005z,
kf5=\E[006z, kf6=\E[007z, kf7=\E[008z, kf8=\E[009z,
kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3, lf3=f4,
lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m, ri=\E[T,
rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw>
# Data General 605x
# Ought to work for a Model 6242, Type D210 as well as a 605x.
# Note that the cursor-down key transmits ^Z. Job control users, beware!
# This also matches a posted description of something called a `Dasher 100'
# so there's a dg100 alias here.
# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
dg6053|dg100|data general 6053,
am, bw, ul,
cols#80, lines#24,
bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K, home=^H,
ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W,
kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w,
kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L, rmso=\200^^E,
rmul=^U, smcup=^L^R, smso=\200\200\200\200\200\036D,
smul=^T,
#### Datamedia (dm)
#
# Datamedia was headquartered in Nashua, New Hampshire in 1993.
# As of early 1996, at least one company called `Datamedia' has been taken
# over by:
#
# Axent Technologies, Inc.
# 2400 Research Boulevard
# Rockville, Maryland 20850
# voice: +1 301/258-5043
# fax: +1 301/330-5756
# email: <info@axent.com>
#
# makers of OmniGuard client/server security software. They are a software
# only company and no longer make terminals. However, the operator there
# told me that she had once spoken to a customer looking for Datamedia
# terminals who'd mentioned a Datamedia in New Jersey. This is backed up
# by comp.terminals poosting describing the ID plate on the back of a
# "Datamedia 3000" terminal. Was this an earlier incarnation of Axent?
# Inquiring minds want to know...
#
cs10|colorscan|Datamedia Color Scan 10,
msgr,
cols#80, lines#24,
bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smso=\E[7m, smul=\E[4m,
cs10-w|Datamedia Color Scan 10 with 132 columns,
cols#132,
cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
dm1520|dm1521|datamedia 1520,
am, xenl,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
khome=^Y,
dm2500|datamedia2500|datamedia 2500,
cols#80, lines#24,
bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
dch1=\020\010\030\035$<10*>,
dl1=\020\032\030\035$<10*>, el=^W, home=^B,
ich1=\020\034\030\035$<10*>,
il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
smdc=^P, smir=^P, smso=^N,
# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
# also, has a meta-key.
# From: <goldberger@su-csli.arpa>
# (dmchat: ":MT:" changed to ":km:" -- esr)
dmchat|dmchat version of datamedia 2500,
km,
dl1=\020\032\030\035$<2/>,
il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
# (dm3025: ":MT:" changed to ":km:" -- esr)
dm3025|datamedia 3025a,
km,
cols#80, it#8, lines#24,
bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
smir=\EP, smso=\EO1,
dm3045|datamedia 3045a,
am, eo, km@, ul, xenl,
dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
use=dm3025,
# Datamedia DT80 soft switches:
# 1 0=Jump 1=Smooth
# Autorepeat 0=off 1=on
# Screen 0=Dark 1=light
# Cursor 0=u/l 1=block
#
# 2 Margin Bell 0=off 1=on
# Keyclick 0=off 1=on
# Ansi/VT52 0=VT52 1=Ansi
# Xon/Xoff 0=Off 1=On
#
# 3 Shift3 0=Hash 1=UK Pound
# Wrap 0=Off 1=On
# Newline 0=Off 1=On
# Interlace 0=Off 1=On
#
# 4 Parity 0=Odd 1=Even
# Parity 0=Off 1=On
# Bits/Char 0=7 1=8
# Power 0=60Hz 1=50Hz
#
# 5 Line Interface 0=EIA 1=Loop
# Aux Interface 0=EIA 1=Loop
# Local Copy 0=Off 1=On
# Spare
#
# 6 Aux Parity 0=Odd 1=Even
# Aux Parity 0=Off 1=On
# Aux Bits/Char 0=7 1=8
# CRT Saver 0=Off 1=On
# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
dm80|dmdt80|dt80|datamedia dt80/1,
clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
use=vt100,
# except in 132 column mode, where it needs a little padding.
# This is still less padding than the vt100, and you can always turn on
# the ^S/^Q handshaking, so you can use vt100 flavors for things like
# reverse video.
dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
cols#132,
clear=\E[H\E[2J$<50/>, cud1=^J,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
# From: Adam Thompson <thompson@xanth.magic.mb.ca> Sept 10 1995
dt80-sas|Datamedia DT803/DTX for SAS usage,
am, bw,
cols#80, lines#24,
acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
bel=^G, clear=^L, cr=^M,
csr=\E=%p1%' '%+%c%' '%c\E#1\E=%p2%' '%+%c%' '%c\E#2,
cub1=^H, cud1=\EB, cuf1=^\,
cup=\E=%p2%' '%+%c%p1%' '%+%c, cuu1=^_, dl1=\EM, ed=^K,
el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
smso=\E$2\004, tbc=\E'0,
# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
# These aren't end-all Excel termcaps; but do insert/delete char/line
# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
# The naming convention has been bent somewhat, with the use of E? (where
# E is for 'Excel') as # a name. This was done to distinguish the entries
# from the other Datamedias in use here, and yet to associate a model of
# the Excel terminals with the regular datamedia terminals that share
# major characteristics.
excel62|excel64|datamedia Excel 62,
dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
use=dt80,
excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
use=dt80w,
excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
smir=\E[4h,
use=dt80,
#### Falco
#
# Falco Data Products
# 440 Potrero Avenue
# Sunnyvale, CA 940864-196
# Vox: (800)-325-2648
# Fax: (408)-745-7860
# Net: techsup@charm.sys.falco.com
#
# Current Falco models as of 1995 are generally ANSI-compatible and support
# emulations of DEC VT-series, Wyse, and Televideo types.
#
# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
# This terminal was released around 1983 and was discontinued long ago.
# The standout and underline highlights are the same.
falco|ts1|ts-1|falco ts-1,
am,
cols#80, it#8, lines#24,
bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
smir=\Eq, smso=\Eg1, smul=\Eg1,
falco-p|ts1p|ts-1p|falco ts-1 with paging option,
am, da, db, mir, msgr, ul,
cols#80, it#8, lines#24,
bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
smso=\Eg4, smul=\Eg1,
# (ts100: I added <rmam>/<smam> based on the init string -- esr)
ts100|ts100-sp|falco ts100-sp,
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM,
kf0=\EOy, kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
ts100-ctxt|falco ts-100 saving context,
rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
#### Florida Computer Graphics
#
# Florida Computer Graphics Beacon System, using terminal emulator program
# "host.com", as provided by FCG. This description is for an early release
# of the "host" program. Known bug: <ed> clears the whole screen, so it's
# commented out.
# From: David Bryant <cbosg!djb> 1/7/83
beacon|FCG Beacon System,
am, da, db,
cols#80, lines#32,
bel=\ESTART\r\E37\r\EEND\r$<1>,
blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
cub1=^H, cud1=^J, cuf1=\EV,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
rmul=\ESTART\r\E60\,0\r\EEND\r,
sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
smul=\ESTART\r\E60\,1\r\EEND\r,
#### Fluke
#
# The f1720a differences from ANSI: no auto margin, destructive
# tabs, # of lines, funny highlighting and underlining
f1720|f1720a|fluke 1720A,
xt,
cols#80, lines#16, xmc#1,
bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smso=\E[7m, smul=\E[4m,
#### Liberty Electronics (Freedom)
#
# Liberty Electronics
# 48089 Fremont Blvd
# Fremont CA 94538
# Vox: (510)-623-6000
# Fax: (510)-623-7021
# From: <faletti@berkeley.edu>
# (f100: added empty <acsc> to suppress a tic warning;
# made this relative to adm+sgr -- note that <invis> isn't
# known to work for f100 but does on the f110. --esr)
f100|freedom|freedom100|freedom model 100,
am, bw, hs, mir, msgr, xon,
cols#80, lines#24,
acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
smacs=\E%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
vpa=\E[%p1%{32}%+%c, use=adm+sgr,
f100-rv|freedom-rv|freedom 100 in reverse video,
flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
# The f110 and f200 have problems with vi(1). They use the ^V
# code for the down cursor key. When kcud1 is defined in terminfo
# as ^V, the Control Character Quoting capability (^V in insert mode)
# is lost! It cannot be remapped in vi because it is necessary to enter
# a ^V to to quote the ^V that is being remapped!!!
#
# f110/f200 users will have to decide whether
# to lose the down cursor key or the quoting capability. We will opt
# initially for leaving the quoting capability out, since use of VI
# is not generally applicable to most interactive applications
# (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
f110|freedom110|Liberty Freedom 110,
bw@, eslok,
it#8, wsl#80,
blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
cvvis=\E.2, dim=\EG@, dl1=\ER, dsl=\Ef\r,
flash=\Eb$<200/>\Ed, il1=\EE, ip@, is2@, kclr=^^, kdch1=\EW,
kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf10@, kich1=\EQ,
kil1=\EE, mc4=\Ea, mc5=\E`, ri=\EJ, rmacs=\E%%, rmir=\Er\EO,
smacs=\E$, smir=\EO\Eq, smso=\EG<, tsl=\Ef,
use=f100,
f110-14|Liberty Freedom 110 14inch,
dch1@, use=f110,
f110-w|Liberty Freedom 110 - 132 cols,
cols#132, use=f110,
f110-14w|Liberty Freedom 110 14in/132 cols,
cols#132,
dch1@, use=f110,
# (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
f200|freedom200|Liberty Freedom 200,
am, eslok, hs, mir, msgr, xon,
cols#80, it#8, lines#24, wsl#80,
acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
clear=^Z, cnorm=\E.1, cr=^M,
csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
cvvis=\E.1, dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY,
el=\ET, flash=\Eo$<200/>\En, fsl=^M, home=^^,
hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c,
use=adm+sgr,
f200-w|Liberty Freedom 200 - 132 cols,
cols#132, use=f200,
# The f200 has the ability to reprogram the down cursor key. The key is
# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
# so powering the terminal off and on will not cause the change to be lost.
f200vi|Liberty Freedom 200 for vi,
flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
f200vi-w|Liberty Freedom 200 - 132 cols for vi,
cols#132, use=f200vi,
#### GraphOn (go)
#
# Graphon Corporation
# 544 Division Street
# Campbell, CA 95008
# Vox: (408)-370-4080
# Fax: (408)-370-5047
# Net: troy@graphon.com (Troy Morrison)
#
#
# The go140 and go225 have been discontinued. GraphOn now makes X terminals,
# including one odd hybrid that starts out life on power-up as a character
# terminal, than can be switched to X graphics mode (driven over the serial
# line) by an escape sequence. No info on this beast yet.
# (go140: I added <rmam>/<smam> based on the init string -- esr)
go140|graphon go-140,
cols#80, it#8, lines#24,
clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J$<10/>, el=\E[K, ht=^I,
if=/usr/share/tabset/vt100, il1=\E[L,
is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
go140w|graphon go-140 in 132 column mode,
am,
cols#132,
is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, use=go140,
# Hacked up vt200 termcap to handle GO-225/VT220
# From: <edm@nwnexus.WA.COM>
# (go225: I added <rmam>/<smam> based on the init string -- esr)
go225|go-225|Graphon 225,
am, mir, xenl,
cols#80, it#8, lines#25, vt#3,
blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
#### Harris (Beehive)
#
# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
# Their terminal group is ancient history now (1995) though the parent
# company is still in business.
#
# Beehive documentation is undated and marked Preliminary and has no figures
# so we must have early Superbee2 (Model 600, according to phone conversation
# with mfr.). It has proved reliable except for some missing padding
# (notably after \EK and <nl> at bottom of screen).
#
# The key idea is that AEP mode is poison for <cup> & that US's in
# the local memory should be avoided like the plague. That means
# that the 2048 character local buffer is used as 25 lines of 80
# characters, period. No scrolling local memory, folks. It also
# appears that we cannot use naked INS LINE feature since it uses
# US. The sbi fakes <il1> with an 80-space insert that may be too
# slow at low speeds; also spaces get converted to \040 which is
# too long for some programs (not vi). DEL LINE is ok but slow.
#
# The <nl> string is designed for last line of screen ONLY; cup to
# 25th line corrects the motion inherent in scrolling to Page 1.
#
# There is one understood bug. It is that the screen appears to
# pop to a new (blank) page after a <nel>, or leave a half-line
# ellipsis to a quad that is the extra 48 memory locations. The
# data received is dumped into memory but not displayed. Not to
# worry if <cup> is being used; the lines not displayed will be,
# whenever the cursor is moved up there. Since <cup> is addressed
# relative to MEMORY of window, nothing is lost; but beware of
# relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
# therefore, is setenv MORE -c .
#
# WARNING: Not all features tested.
#
# Timings are assembled from 3 sources. Some timings may reflect
# SB2/Model 300 that were used if more conservative.
# Tested on a Model 600 at 1200 and 9600 bd.
#
# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
# placed on the keyboard and useless because of AEP, is made
# into a backspace key. In use ESC must be pressed twice (to send)
# and sending ^C must be prefixed by ESC to avoid that weird
# transmit mode associated with ENTER key.
#
# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
# the screen, then it has dropped into ENTER mode; hit
# RESET--ONLINE--!tset.
#
# As delivered this machine has a FATAL feature that will throw
# it into that strange transmit state (SPOW) if the space bar is
# hit after a CR is received, but before receiving a LF (or a
# few others).
#
# The circuits MUST be modified to eliminate the SPOW latch.
# This is done by strapping on chip A46 of the I/O board; cut
# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
# chip. This mod has been checked out on a Mod 600 of Superbee II.
# With this modification absurdly high timings on cr are
# unnecessary.
#
# NOTE WELL that the rear panel switch should be set to CR/LF,
# not AEP!
#
sb1|beehive superbee,
am, bw, da, db, mir, ul, xsb,
cols#80, lines#25, xmc#1,
bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
smso=\E_1, smul=\E_0, tbc=\E3,
sbi|superbee|beehive superbee at Indiana U.,
xsb,
cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA, use=sb1,
# Alternate (older) description of Superbee - f1=escape, f2=^C.
# Note: there are at least 3 kinds of superbees in the world. The sb1
# holds onto escapes and botches ^C's. The sb2 is the best of the 3.
# The sb3 puts garbage on the bottom of the screen when you scroll with
# the switch in the back set to CRLF instead of AEP. This description
# is tested on the sb2 but should work on all with either switch setting.
# The f1/f2 business is for the sb1 and the <xsb> can be taken out for
# the other two if you want to try to hit that tiny escape key.
# This description is tricky: being able to use cup depends on there being
# 2048 bytes of memory and the hairy <nl> string.
superbee-xsb|beehive super bee,
am, da, db, xsb,
cols#80, it#8, lines#25,
clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
home=\EH, ht=^I, hts=\E1,
ind=\n\200\200\200\n\200\200\200\EA\EK\200\200\200\ET\ET,
is2=\EH\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
kf8=\Ew, khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
# This loses on lines > 80 chars long, use at your own risk
superbeeic|super bee with insert char,
ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
sb2|sb3|fixed superbee,
xsb@, use=superbee,
# Reports are that most of these Beehive entries (except superbee) have not
# been tested and do not work right. <rmso> is a trouble spot. Be warned.
# (bee: <ich1> was empty, which is obviously bogus -- esr)
beehive|bee|harris beehive,
am, mir,
cols#80, lines#24,
cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
smir=\EQ, smso=\EdP, smul=\Ed`,
# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
# good grief - does this entry make :sg:/:ug: when it doesn't have to?
# look at those spaces in <rmso>/<smso>. Seems strange to me...
# (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
# really care, cook up one using ^F -- esr)
beehive3|bh3m|beehiveIIIm|harris beehive 3m,
am,
cols#80, it#8, lines#20,
bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
beehive4|bh4|beehive 4,
am,
cols#80, lines#24,
bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
microb|microbee|micro bee series,
am,
cols#80, it#8, lines#24,
bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
# 8675, 8686, and bee from Cyrus Rahman
# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
ha8675|harris 8675,
is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
kf8=\177, kf9=\Ee,
use=bee,
# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
# in :is: -- esr)
ha8686|harris 8686,
is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
use=bee,
#### Hazeltine
#
# Hazeltine appears to be out of the business now (1995). These guys were
# co-owners of the Terminal Brain Damage Hall Of Fame along with Harris.
# They have a hazeltine.com domain and can be reached at:
#
# Hazeltine
# 450 East Pulaski Road
# Greenlawn, New York 11740
#
# As late as 1993, manuals for the terminal product line could still be
# purchased from:
#
# TRW Customer Service Division
# 15 Law Drive
# P.O. Box 2076
# Fairfield, NJ 07007-2078
#
# Since <cuf1> is blank, when you want to erase something you
# are out of luck. You will have to do ^L's a lot to
# redraw the screen. h1000 is untested. It doesn't work in
# vi - this terminal is too dumb for even vi. (The code is
# there but it isn't debugged for this case.)
hz1000|hazeltine 1000,
cols#80, lines#12,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
ind=^J,
# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
hz1420|hazeltine 1420,
am,
cols#80, lines#24,
bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
smso=\E^_,
# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
# freakout with out-of-range args and tn3270. No hz since it needs to
# receive tildes.
hz1500|hazeltine 1500,
am, hz,
cols#80, lines#24,
bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%'`'%+%c%p1%'`'%+%c,
cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
# h1510 assumed to be in sane escape mode. Else use h1500.
# (h1510: early versions of this entry apparently had "<rmso=\E^_>,
# <smso=\E^Y>, but these caps were commented out in 8.3; also,
# removed incorrect and overridden ":do=^J:" -- esr)
hz1510|hazeltine 1510,
am,
cols#80, lines#24,
bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
el=\E^O, il1=\E^Z, ind=^J,
# Hazeltine 1520
# The following switch settings are assumed for normal operation:
# FULL CR U/L_CASE ESCAPE
# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
# Other switches may be set for operator convenience or communication
# requirements.
hz1520|Hazeltine 1520,
am, bw, msgr,
cols#80, lines#24,
bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
# This version works with the escape switch off
# (h1520: removed incorrect and overridden ":do=^J:" -- esr)
hz1520-noesc|hazeltine 1520,
am, hz,
cols#80, lines#24,
bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
# Note: the h1552 appears to be the first Hazeltine terminal which
# is not braindamaged. It has tildes and backprimes and everything!
# Be sure the auto lf/cr switch is set to cr.
hz1552|hazeltine 1552,
cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
lf2=red, lf3=green,
use=vt52,
hz1552-rv|hazeltine 1552 reverse video,
cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
# Note: h2000 won't work well because of a clash between upper case and ~'s.
hz2000|hazeltine 2000,
am,
cols#74, lines#27,
bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
il1=~\032$<6>, ind=^J, pad=\177,
# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
# I tested this termcap entry for the Hazeltine Esprit with vi. It seems
# to work ok. There is one problem though if one types a lot of garbage
# characters very fast vi seems not able to keep up and hangs while trying
# to insert. That's in insert mode while trying to insert in the middle of
# a line. It might be because the Esprit doesn't have insert char and delete
# char as a built in function. Vi has to delete to end of line and then
# redraw the rest of the line.
esprit|Hazeltine Esprit I,
am, bw,
cols#80, lines#24,
bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
esprit-am|hazeltine esprit auto-margin,
am, use=esprit,
# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
# Vi it seems always wants to send a control J for "do" and it turned out
# that the terminal would work somewhat if the auto LF/CR was turned off.
# (hmod1: removed :dn=~^K: -- esr)
hmod1|Hazeltine Modular 1,
am, hz,
cols#80, lines#24,
bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
#
# Hazeltine Executive 80 Model 30 (1554?)
# from Will Martin <control@ALMSA-1.ARPA> via BRL
# Like VT100, except for different "am" behavior.
hazel|exec80|h80|he80|Hazeltine Executive 80,
am,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
smul=\E[4m$<2/>,
#### IBM
#
ibm327x|line mode IBM 3270 style,
gn,
clear=^M^J, el=^M, home=^M,
# Beware! The 3101 entry IBM shipped with AIX 3 is *wrong*. Losers...
# From: J.B. Nicholson-Owens <jeffo@uiuc.edu> 8 Mar 94
# (ibm3101: <if=/usr/share/tabset/ibm3101> removed, no such file -- esr)
ibm3101|i3101|IBM 3101-10,
am, xon,
cols#80, lines#24,
bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EI, home=\EH, ht=^I, hts=\E0, ind=^J, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\E1,
# Received from the IBM terminals division (given to DRB)
# June 1988 for PS/2 OS 2.2.3 cut
ibm3151|i3151|IBM 3151,
rmso=\E4@, rmul=\E4@,
sgr=\E4%{64}%?%p1%{0}%>%p1%{4}%<%&%t%{8}%|%;%?%p1%{7}%=%t%{16}%|%;%?%p2%t%{1}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%c,
sgr0=\E4@, smso=\E4A, smul=\E4B,
use=ibm3163,
# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
# I've commented out or translated some IBM extensions.
ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
am, mir, msgr,
cols#80, it#8, lines#24,
acsc=l\354q\361k\353x\370j\352m\355w\367u\365v\366t\364n\356,
bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
ktbc=\E 1, rev=\E4A, rmcup=\E>A, rmso=\E4@, rmul=\E4@,
sgr=\E4%'@'%?%p1%t%'A'%|%;\n%?%p2%t%'B'%|%;\n%?%p3%t%'A'%|%;\n%?%p4%t%'D'%|%;\n%?%p5%t%'@'%|%;\n%?%p6%t%'H'%|%;\n%?%p7%t%'P'%|%;%c\n%?%p9%t\E>A%e\E<@%;,
sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
# How the 3164 sgr string works:
# %{32} # push space for no special video characteristics
# %?%p2%t%{1}%|%; # if p2 set, then OR the 1 bit for reverse
# %?%p3%t%{4}%|%; # if p3 set, then OR the 4 bit for blink
# %?%p4%t%{2}%|%; # if p4 set, then OR the 2 bit for underline
# %c # pop Pa1
# %{39}%p1%- # calculate 32 + (7 - p1) for foreground
# %c # pop Pa2
# %{64} # use only black background for now
# %c # pop Pa3
ibm3164|i3164|IBM 3164,
blink=\E4D, bold=\E4H,
sgr=\E4%{32}%?%p2%t%{1}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%c%{39}%p1%-%c%{64}%c,
sgr0=\E4@,
use=ibm3163,
ibmaed|IBM Experimental display,
am, eo, msgr,
cols#80, it#8, lines#52,
clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
rmso=\E0, sgr0=\E0, smso=\E0,
ibm-apl|apl|IBM apl terminal simulator,
lines#25, use=dm1520,
# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
ibmmono|ibm5151|IBM workstation monochrome,
eslok, hs,
bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
khome=\EH, kich1=\200, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo, use=ibm3101,
ibmega|ibm5154|IBM Enhanced Color Display,
cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
nel=^M^J,
use=ibmmono,
ibmega-c|ibm5154-c|IBM Enhanced Color Display,
rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;, use=ibmmono,
ibmvga-c|IBM VGA display color termcap,
cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
nel=^M^J,
use=ibmega-c,
ibmvga|IBM VGA display,
cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
nel=^M^J,
use=ibmega,
# ibmapa* and ibmmono entries come from ACIS 4.3 distribution
rtpc|ibmapa16|ibm6155|IBM 6155 Extended Monochrome Graphics Display,
lines#32,
dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
# Advanced Monochrome (6153) and Color (6154) Graphics Display:
ibmapa8c|ibmapa8|ibm6154|ibm6153|IBM 6153/4 Advanced Graphics Display,
lines#31,
dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
lines#31,
dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmega-c,
# From: Marc Pawliger <marc@ibminet.awdpa.ibm.com>
# also in /usr/lpp/bos/bsdsysadmin.
# (hft-c: this entry had :kb=\E[D:kf=\E[C: on the line with ku/kd/kh; this was
# pretty obviously mislabeled for :le: and :nd:; also ":ul=\E[4m:" was clearly
# a typo for ":us=\E[4m:"; also ":el=\E[K:" was a typo for ":ce=\E[K:".
# I also added <rmam>/<smam> based on the terminal reset string.
# There was an unknown boolean ":ht:" which I assume was meant to set hardware
# tabs, so I have inserted it#8. Finally, :ac=^N: paired with the :ae: looked
# like a typo for :as=^N:; finally, added empty <acsc> to quiet tic -- esr)
ibm8512|ibm8513|hft-c|IBM High Function Terminal,
am, mir, msgr,
cols#80, it#8, lines#25,
acsc=, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cub1=\E[D,
cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
home=\E[H, il=\E[%p1%dL, il1=\E[L, is2=\Eb\E[m\017\E[?7h,
kcud1=\E[B, kcuu1=\E[A, kf0=\E[010q, kf1=\E[001q,
kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, kf5=\E[005q,
kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, kf9=\E[009q,
khome=\E[H, rc=\E[u, rev=\E[7m, rmacs=^O, rmam=\E[?7l,
rmcup=\E[20h, rmdc=\E[4l, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
hft|AIWS High Function Terminal,
am, xon,
cols#80, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m,
ibm-system1|system1|ibm system/1 computer,
am, xt,
cols#80, lines#24,
bel=^G, clear=^Z, cub1=^H, cuf1=^\,
cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
ind=^J,
# From: <pryor@math.berkeley.edu>
ibm5081|ibmmpel|IBM 5081 1024x1024 256/4096 color display,
eslok, hs,
lines#33,
dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, use=ibmmono,
ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 enhanced color display,
eslok, hs,
lines#33,
dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, use=ibmega-c,
ibm8514|IBM 8514 color display,
eslok, hs,
lines#41,
cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
use=ibmega,
ibm8514-c|IBM 8514 color display,
eslok, hs,
lines#41,
cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
use=ibmega-c,
#
# AIX entries. IBM ships these with AIX 3.
# AIX extension caps are commented out,
# except for box1 which has been translated to an <acsc> string.
#
aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
eslok, hs,
acsc=llqqkkxxjjmmwwuuvvttnn, bold=\E[1m, dsl=\E[?E,
fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT,
use=ibm6153,
aixterm-m-old|IBM AIXterm Monochrome Terminal Emulator,
eslok, hs,
bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
tsl=\E[?%p1%dT,
use=ibm6153,
jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
acsc@,
use=aixterm-m,
#### Infoton/General Terminal Corp.
#
# gt100 sounds like something DEC would come out with. Let's hope they don't.
i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
am,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
ind=^J, rmso=\Ea, smso=\Eb,
i400|infoton 400,
am,
cols#80, lines#25,
bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=%i\E[%p1%3d;%p2%3dH, cuu1=\E[A,
dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
# (addrinfo: removed obsolete ":bc=^Z:" -- esr)
addrinfo,
am,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
cup=\037%p1%{1}%-%c%p2%{1}%-%c, cuu1=^\, ed=^K, home=^H,
ind=^J, ll=^H^\,
# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
infoton,
am,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
ed=^K, ind=^J, ll=^H^\,
#### Interactive Systems Corp
#
# ISC used to sell OEMed and customized hardware to support ISC UNIX.
# ISC UNIX still exists in 1995, but ISC itself is no more; they got
# bought out by Sun.
#
# From: <cithep!eric> Wed Sep 16 08:06:44 1981
# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
# ":le=^_:" later overridden -- esr)
intext|Interactive Systems Corporation modified owl 1200,
am,
cols#80, it#8, lines#24, xmc#1,
bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%,
smso=^V$\,,
intext2|intextii|INTERACTIVE modified owl 1251,
am, bw, ul,
cols#80, lines#24, xmc#0,
bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J, el=\E[K,
flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
smul=\E[18 D,
#### Kimtron (abm, kt)
#
# Kimtron entries include (undocumented) codes for: enter dim mode,
# enter bold mode, enter reverse mode, turn off all attributes.
#
# Kimtron ABM 85 added by Dual Systems
# (abm85: removed duplicated ":kd=^J:" -- esr)
abm85|Kimtron ABM 85,
am, bw, msgr,
cols#80, it#8, lines#24, xmc#1,
cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\Ey, el=\Et, ht=^I,
if=/usr/share/tabset/stdcrt, il1=\EE,
is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
# Kimtron ABM 85H added by Dual Systems.
# Some notes about the abm85h entries:
# 1) there are several firmware revs of 85H in the world. Use abm85h-old for
# firmware revs prior to SP51
# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
# abm85e entry if it is in tvi920 emulation mode. They are incompatible
# in some places and NOT software settable i.e., <is2> can't fix it)
# 3) In 85h mode, the arrow keys and special functions transmit when
# the terminal is in dup-edit, and work only locally in local-edit.
# Vi won't swallow `del char' for instance, but <smcup> turns on
# dup-edit anyway so that the arrow keys will work right. If the
# arrow keys don't work the way you like, change <smcup>, <rmcup>, and
# <is2>. Note that 920E mode does not have software commands to toggle
# between dup and local edit, so you get whatever was set last on the
# terminal.
# 4) <flash> attribute is nice, but seems too slow to work correctly
# (\Eb<pad>\Ed)
# 5) Make sure `hidden' attributes are selected. If `embedded' attributes
# are selected, the <xmc@> entry should be removed.
# 6) auto new-line should be on (selectable from setup mode only)
#
# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
abm85h|Kimtron ABM 85H native mode,
hs,
xmc@,
bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
fsl=^M, invis@,
is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef,
use=adm+sgr, use=abm85,
abm85e|Kimtron ABM 85H in 920E mode,
xmc@,
bel=^G, dim=\E), flash@,
is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
rev=\Ej, sgr0=\E(\Ek, smir=\EZ,
use=abm85,
abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
xmc@,
bel=^G, dim=\E),
is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
rev=\Ej, sgr0=\E(\Ek, smir=\EZ,
use=abm85,
# From: <malman@bbn-vax.arpa>
# (kt7: removed obsolete :ma=^V^J^L :" -- esr)
kt7|kimtron model kt-7,
am,
cols#80, it#8, lines#24,
cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, tsl=\Ef,
use=adm+sgr,
# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
# other kt7 entry and the adjacent key capabilities). Removed EE which is
# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
# but we can't figure out what.
kt7ix|kimtron model kt-7 or 70 in IX mode,
am, bw,
cols#80, it#8, lines#25,
acsc=lZm@k?jYt4uCvAwBqDx3nE, bel=^G, blink=\EG2, cbt=\EI,
civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
nel=^M^J, pulse=\EK, rmacs=\E%, rmir=, rmso=\EG0, rmul=\EG0,
sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
#### Microdata/MDIS
#
# This was a line of terminals made by McDonnell-Douglas Information Systems.
# These entries come direct from MDIS documentation. I have edited them only
# to move primary names of the form p[0-9] * to aliases, and to comment out
# <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
# also removed the change history; the last version indicates this is
# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
#
# McDonnell Information Systems Terminal Family History
# =========================================
#
# Prism-1, Prism-2 and P99:
# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
#
# Prism-4 and Prism-5:
# Slightly less ancient range of Microdata terminals. Follow-on from
# Prism-2, but with many enhancements. P5 has eight display pages.
#
# Prism-6:
# A special terminal for use with library systems, primarily in Germany.
# Limited numbers. Similar functionality to P5 (except attributes?).
#
# Prism-7, Prism-8 and Prism-9:
# More recent range of MDIS terminals, in which P7 and P8
# replace the P4 & P5, with added functionality, and P9 is the flagship.
# The P9 has two emulation modes - P8 and ANSI - and includes a
# large number of the DEC VT220 control sequences. Both
# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
#
# Prism-12 and Prism-14:
# Latest range, functionally very similar to the P9. The P14 has a
# black-on-white overscanning screen.
#
# The terminfo definitions given here are:
#
# p2 - Prism-2 (or Prism-1 or P99).
#
# p4 - Prism-4 (and older P7s & P8s).
# p5 - Prism-5 (or Prism-6).
#
# p7 - Prism-7.
# p8 - Prism-8 (in national or multinational mode).
# p8-w - 132 column version of p8.
# p9 - Prism-9 in ANSI mode.
# p9-w - 132 column version of p9.
# p9-8 - Prism-9 in Prism-8 emulation mode.
# p9-8-w - As p9-8, but with 132 columns.
#
# p12 - Prism-12 in ANSI mode.
# p12-w - 132 column version of p12.
# p12-m - Prism-12 in MDC emulation mode.
# p12-m-w - As p12-m, but with 132 columns.
# p14 - Prism-14 in ANSI mode.
# p14-w - 132 column version of p14.
# p14-m - Prism-14 in MDC emulation mode.
# p14-m-w - As p14-m, but with 132 columns.
#
# p2: Prism-2
# -----------
#
# Includes Prism-1 and basic P99 without SP or MP loaded.
# The simplest form of Prism-type terminal.
# Basic cursor movement and clearing operations only.
# No video attributes.
# Notes:
# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
# value up, followed by backspace.
#
P2|prism2|MDC Prism-2,
am, bw, msgr,
cols#80, lines#24,
bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
cuu1=^Z, ed=\EJ, el=\EK, home=^A,
hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
ind=^J, kbs=^H, khome=^A, vpa=\013%p1%' '%+%c,
# p4: Prism-4
# -----------
#
# Includes early versions of P7 & P8.
# Basic family definition for most Prisms (except P2 and P9 ANSI).
# Notes:
# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
# value up, followed by backspace.
# Cursor key definitions removed because they interfere with vi and csh keys.
#
prism4|p4|P4|MDC Prism-4,
am, bw, hs, mc5i, msgr,
cols#80, lines#24, wsl#72, xmc#1,
bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
fsl=^]\345, home=^A^J,
hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
rev=^CD, rmso=^C\s, rmul=^C\s,
sgr=\003%'@'%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
vpa=\013%p1%' '%+%c,
# p5: Prism-5
# -----------
#
# Same definition as p4. Includes Prism-6 (not tested!).
# Does not use any multi-page features.
#
prism5|p5|P5|MDC Prism-5,
use=p4,
# p7: Prism-7
# -----------
#
# Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
# Notes:
# Use p4 for very early models of P7.
# Rev-index removed; can't send nulls to terminal in 8-bit modes.
#
prism7|p7|P7|MDC Prism-7,
cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
# p8: Prism-8
# -----------
#
# Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
# Supports national and multinational character sets.
# Notes:
# Alternate char set operations only work in multinational mode.
# Use p4 for very early models of P8.
# Rev-index removed; can't send nulls to terminal in 8-bit modes.
# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
#
prism8|p8|P8|MDC Prism-8,
cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
vpa=\E[%i%p1%dd,
use=p4,
# p8-w: Prism-8 in 132 column mode
# --------------------------------
#
# 'Wide' version of p8.
# Notes:
# Rev-index removed; can't send nulls to terminal in 8-bit modes.
#
prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
cols#132,
is2=\E[<12h\E[<14h, use=p8,
# p9: Prism-9 in ANSI mode
# -------------------------
#
# The "flagship" model of this generation of terminals.
# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
# Notes:
# Tabs only reset by "reset". Otherwise assumes default (8 cols).
# Fixes to deal with terminal firmware bugs:
# . 'ri' uses insert-line since rev index doesn't always
# . 'sgr0' has extra '0' since esc[m fails
# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
# Not covered in the current definition:
# . Labels
# . Programming Fn keys
# . Graphic characters (defaults correctly to vt100)
# . Padding values (sets xon)
# (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
#
prism9|p9|P9|MDC Prism-9 in ANSII mode,
am, bw, hs, mc5i, msgr, xenl, xon,
cols#80, it#8, lines#24, vt#3, wsl#72,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
sc=\E[%y,
sgr=\E[%{0}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{2}%+%;%?%p4%t%{1}%+%;%?%p6%t%{8}%+%;%?%p8%t%{32}%+%;%d%%{%?%p9%t\016%e\017%;,
sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
# p9-w: Prism-9 in 132 column mode
# --------------------------------
#
# 'Wide' version of p9.
#
prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
cols#132,
is2=\E[&p\E[<12l\E F\E[<14h,
rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
# p9-8: Prism-9 in P8 mode
# ------------------------
#
# P9 terminal in P8 emulation mode.
# Similar to p8 definition.
# Insertion and deletion operations possible.
#
prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
# p9-8-w: Prism-9 in P8 and 132 column modes
# ------------------------------------------
#
# P9 terminal in P8 emulation mode and 132 column mode.
#
prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
# p12: Prism-12 in ANSI mode
# ---------------------------
#
# See p9 definition.
#
prism12|p12|P12|MDC Prism-12 in ANSI mode,
use=p9,
# p12-w: Prism-12 in 132 column mode
# ----------------------------------
#
# 'Wide' version of p12.
#
prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
use=p9-w,
# p12-m: Prism-12 in MDC emulation mode
# -------------------------------------
#
# P12 terminal in MDC emulation mode.
# Similar to p8 definition.
# Insertion and deletion operations possible.
#
prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
use=p9-8,
# p12-m-w: Prism-12 in MDC emulation and 132 column modes
# -------------------------------------------------------
#
# P12 terminal in MDC emulation mode and 132 column mode.
#
prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
use=p9-8-w,
# p14: Prism-14 in ANSII mode
# ---------------------------
#
# See p9 definition.
#
prism14|p14|P14|MDC Prism-14 in ANSII mode,
use=p9,
# p14-w: Prism-14 in 132 column mode
# ----------------------------------
#
# 'Wide' version of p14.
#
prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
use=p9-w,
# p14-m: Prism-14 in MDC emulation mode
# -------------------------------------
#
# P14 terminal in MDC emulation mode.
# Similar to p8 definition.
# Insertion and deletion operations possible.
#
prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
use=p9-8,
# p14-m-w: Prism-14 in MDC emulation and 132 column modes
# -------------------------------------------------------
#
# P14 terminal in MDC emulation mode and 132 column mode.
#
prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
use=p9-8-w,
# End of McDonnell Information Systems Prism definitions
# These things were popular in the Pick database community at one time
# From: George Land <georgeland@aol.com> 24 Sep 1996
p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
am, bw, hs, mir,
cols#80, lines#24, ma#1, wsl#78, xmc#1,
bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
pad=\200, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
smul=^C0,
#### Microterm (act, mime)
#
# The mime1 entries refer to the Microterm Mime I or Mime II.
# The default mime is assumed to be in enhanced act iv mode.
#
# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
# freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
# <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
# since Sytek insists ^S means xoff.
# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
act4|microterm|microterm act iv,
am,
cols#80, lines#24,
bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
cup=\024%p1%{24}%+%c%p2%p2%?%'/'%>%t%'0'%+%;%'P'%+%c,
cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
kcuu1=^Z,
# The padding on :sr: and :ta: for act5 and mime is a guess and not final.
# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
act5|microterm5|microterm act v,
kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA, use=act4,
# Mimes using brightness for standout. Half bright is really dim unless
# you turn up the brightness so far that lines show up on the screen.
mime-fb|full bright mime1,
is2=^S\E, rmso=^S, smso=^Y, use=mime,
mime-hb|half bright mime1,
is2=^Y\E, rmso=^Y, smso=^S, use=mime,
# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
# the more plausible ":do=^J:" -- esr)
# uc was at one time disabled to get around a curses bug, be wary of it
mime|mime1|mime2|mimei|mimeii|microterm mime1,
am,
cols#80, it#8, lines#24, vt#9,
bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%'0'%+%;%'P'%+%c,
cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
# These termcaps (for mime2a) put the terminal in low intensity mode
# since high intensity mode is so obnoxious.
mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
am,
cols#80, lines#24,
bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
smir=\EE, smso=\E\:, smul=\E6,
# This is the preferred mode (but ^X can't be used as a kill character)
mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
cols#80, it#8, lines#24,
bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
rmul=\E5, smir=^O, smso=\E8, smul=\E4,
# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
mime3a|mime1 emulating 3a,
am@,
kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
mime3ax|mime-3ax|mime1 emulating enhanced 3a,
it#8,
dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>, use=mime3a,
# Wed Mar 9 18:53:21 1983
# We run our terminals at 2400 baud, so there might be some timing problems at
# higher speeds. The major improvements in this model are the terminal now
# scrolls down and insert mode works without redrawing the rest of the line
# to the right of the cursor. This is done with a bit of a kludge using the
# exit graphics mode to get out of insert, but it does not appear to hurt
# anything when using vi at least. If you have some users using act4s with
# programs that use curses and graphics mode this could be a problem.
mime314|mm314|mime 314,
am,
cols#80, lines#24,
clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
# Microterm mime 340 from University of Wisconsin
mm340|mime340|mime 340,
cols#80, lines#24,
clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
# This came from University of Wisconsin marked "astro termcap for jooss".
# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
# also added <rmam>/<smam> based on the init string -- esr)
mt4520-rv|micro-term 4520 reverse video,
am, hs, msgr, xenl, xon,
cols#80, it#8, lines#24, wsl#80,
bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
tbc=\E[g, tsl=\E[25;1H,
# Fri Aug 5 08:11:57 1983
# This entry works for the ergo 4000 with the following setups:
# ansi,wraparound,newline disabled, xon/xoff disabled in both
# setup a & c.
#
# WARNING!!! There are multiple versions of ERGO 4000 microcode
# Be advised that very early versions DO NOT WORK RIGHT !!
# Microterm does have a ROM exchange program- use it or lose big
# (ergo400: added <rmam>/<smam> based on the init string -- esr)
ergo4000|microterm ergo 4000,
da, db, msgr,
cols#80, lines#66,
bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
el=\E[0K$<13>, ht=^I, il=\E[1L$<5*>, ind=\ED$<20*>,
is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
smso=\E[7m$<20>,
#### NCR
#
# NCR's terminal group was merged with AT&T's when AT&T bought the company.
# For what happened to that group, see the ADDS section.
#
# There is an NCR4103 terminal that's just a re-badged Wyse-50.
#
# NCR7900 DIP switches:
#
# Switch A:
# 1-4 - Baud Rate
# 5 - Parity (Odd/Even)
# 6 - Don't Send or Do Send Spaces
# 7 - Parity Enable
# 8 - Stop Bits (One/Two)
#
# Switch B:
# 1 - Upper/Lower Shift
# 2 - Typewriter Shift
# 3 - Half Duplex / Full Duplex
# 4 - Light/Dark Background
# 5-6 - Carriage Return Without / With Line Feed
# 7 - Extended Mode
# 8 - Suppress Keyboard Display
#
# Switch C:
# 1 - End of line entry disabled/enabled
# 2 - Conversational mode / (Local?) Mode
# 3 - Control characters displayed / not displayed
# 4 - (2-wire?) / 4-wire communications
# 5 - RTS on and off for each character
# 6 - (50Hz?) / 60 Hz
# 7 - Exit after level zero diagnostics
# 8 - RS-232 interface
#
# Switch D:
# 1 - Reverse Channel (yes / no)
# 2 - Manual answer (no / yes)
# 3-4 - Cursor appearance
# 5 - Communication Rate
# 6 - Enable / Disable EXT turnoff
# 7 - Enable / Disable CR turnoff
# 8 - Enable / Disable backspace
#
# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
ncr7900i|ncr7900|ncr 7900 model 1,
am, bw, ul,
cols#80, lines#24, xmc#1,
bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
rmul=\E0@,
sgr=\E0%p5%'@'%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
sgr0=\E0@, smso=\E0Q, smul=\E0`,
ncr7900iv|ncr 7900 model 4,
am, bw, eslok, hs,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
cup=\013%p1%'@'%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
ncr7901|ncr 7901 model,
am, bw, ul,
cols#80, lines#24,
bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
cub1=^H, cud1=^J, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
ed=\Ek, el=\EK,
hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
sgr=\E0%p5%'@'%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
vpa=\013%p1%'@'%+%c,
#### Perkin-Elmer (Owl)
#
# These are official terminfo entries from within Perkin-Elmer.
#
bantam|pe550|pe6100|perkin elmer 550,
cols#80, lines#24,
bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
fox|pe1100|perkin elmer 1100,
am,
cols#80, lines#24,
bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
owl|pe1200|perkin elmer 1200,
am, in,
cols#80, lines#24,
bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
rmso=\E!\200, sgr0=\E!\200, smso=\E!^H, tbc=\E3,
pe1251|pe6300|pe6312|perkin elmer 1251,
am,
cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
# (pe7000m: this had
# rmul=\E!\0, smul=\E!\040,
# which is probably wrong, it collides with kf0
pe7000m|perkin elmer 7000 series monochrome monitor,
am,
cols#80, lines#24,
bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
ed=\EJ, el=\EI, home=\EH, ind=^J,
is1=\E!\200\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\200, kf1=\E!^A,
kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
ll=\ES7\s, ri=\ER,
pe7000c|perkin elmer 7000 series colour monitor,
is1=\E!\200\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
rmul=\E!\200, smso=\Eb2, smul=\E!\s,
use=pe7000m,
#### Sperry Univac
#
# Sperry Univac has merged with Burroughs to form Unisys.
#
# This entry is for the Sperry UTS30 terminal running the TTY
# utility under control of CP/M Plus 1R1. The functionality
# provided is comparable to the DEC vt100.
# (uts30: I added <rmam>/<smam> based on the init string -- esr)
uts30|sperry uts30 with cp/m@1R1,
am, bw, hs,
cols#80, lines#24, wsl#40,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
smul=\E[4m, tsl=\E], uc=\EPB,
#### Tandem
#
# Tandem builds these things for use with its line of fault-tolerant
# transaction-processing computers. They aren't generally available
# on the merchant market, and so are fairly uncommon.
#
tandem6510|adm3a repackaged by Tandem,
use=adm3a,
# A funny series of terminal that TANDEM uses. The actual model numbers
# have a fourth digit after 653 that designates minor variants. These are
# natively block-mode and rather ugly, but they have a character mode which
# this doubtless(?) exploits. There is a 6520 that is slightly dumber.
# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
# removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
tandem653|t653x|Tandem 653x multipage terminal,
am, da, db, hs,
cols#80, lines#24, wsl#64, xmc#1,
clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
#### Tandy/Radio Shack
#
# Tandy has a line of VDTs distinct from its microcomputers.
#
dmterm|deskmate terminal,
am, bw,
cols#80, lines#24,
bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
use=adm+sgr,
dt100|dt-100|Tandy DT-100 terminal,
xon,
cols#80, lines#24, xmc#1,
acsc=kkllmmjjnnwwvvttuuqqxx, bel=^G, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
cols#132, use=dt100,
dt110|Tandy DT-110 emulating ansi,
xon,
cols#80, lines#24,
acsc=kkllmmjjnnwwvvuuttqqxx, bel=^G, civis=\E[?25l,
clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smacs=^N, smso=\E[7m, smul=\E[4m,
pt210|TRS-80 PT-210 printing terminal,
hc, os,
cols#80,
bel=^G, cr=^M, cud1=^J, ind=^J,
#### Tektronix (tek)
#
# Tektronix tubes are graphics terminals. Most of them use modified
# oscilloscope technology incorporating a long-persistence green phosphor,
# and support vector graphics on a main screen with an attached "dialogue
# area" for interactive text.
#
tek|tek4012|tektronix 4012,
os,
cols#75, lines#35,
bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
ff=\014$<1000>, is2=\E^O,
# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
tek4013|tektronix 4013,
acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
tek4014|tektronix 4014,
cols#81, lines#38,
is2=\E\017\E9, use=tek4012,
# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
tek4015|tektronix 4015,
acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
tek4014-sm|tektronix 4014 in small font,
cols#121, lines#58,
is2=\E\017\E\:, use=tek4014,
# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
tek4015-sm|tektronix 4015 in small font,
acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
#
# You need to have "stty nl2" in effect. Some versions of tset(1) know
# how to set it for you.
#
# It's got the Magic Cookie problem around stand-out mode. If you can't
# live with Magic Cookie, remove the :so: and :se: fields and do without
# reverse video. If you like reverse video stand-out mode but don't want
# it to flash, change the letter 'H' to 'P' in the :so: field.
tek4023|tektronix 4023,
am,
cols#80, lines#24, vt#4, xmc#1,
bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, rmso=^_@,
smso=^_P,
# It is recommended that you run the 4025 at 4800 baud or less;
# various bugs in the terminal appear at 9600. It wedges at the
# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
# on keyboard don't work. You have to hit BREAK twice to get
# one break at any speed - this is a documented feature.
# Can't use cursor motion because it's memory relative, and
# because it only works in the workspace, not the monitor.
# Same for home. Likewise, standout only works in the workspace.
#
# <el> was commented out since vi and rogue seem to work better
# simulating it with lots of spaces!
#
# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
# and didn't seem necessary.
#
tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
am, da, db,
cols#80, it#8, lines#34, lm#0,
bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
ind=^F^J,
is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
tek4025-17|tek 4025 17 line window,
lines#17, use=tek4025,
tek4025-17-ws|tek 4025 17 line window in workspace,
is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
smso=\037att e\r,
use=tek4025-17,
tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
rmcup=\037com 33\r, smcup=!com 31\r,
use=tek4025,
# Tektronix 4025a
# From: Doug Gwyn <gwyn@brl-smoke.ARPA>
# The following status modes are assumed for normal operation (replace the
# initial "!" by whatever the current command character is):
# !COM 29 # NOTE: changes command character to GS (^])
# ^]DUP
# ^]ECH R
# ^]EOL
# ^]RSS T
# ^]SNO N
# ^]STO 9 17 25 33 41 49 57 65 73
# Other modes may be set according to communication requirements.
# If the command character is inadvertently changed, termcap can't restore it.
# Insert-character cannot be made to work on both top and bottom rows.
# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
# There also seems to be a problem with vertical motion, perhaps involving
# delete/insert-line, following a typed carriage return. This terminal sucks.
# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
# work any more. -- esr)
tek4025a|Tektronix 4025A,
am, bw, da, db, xon,
cols#80, it#8, lines#34,
bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
tbc=\035sto;,
# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
# Here's the command file that I use to get rogue to work on the 4025.
# It should work with any program using the old curses (e.g. it better
# not try to scroll, or cursor addressing won't work. Also, you can't
# see the cursor.)
# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
tek4025-cr|tek 4025 for curses and rogue,
am,
cols#80, it#8, lines#33,
clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
rmcup=\037wor 0, smcup=\037wor 33h,
# next two lines commented out since curses only allows 128 chars, sigh.
# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
tek4025ex|4025ex|4027ex|tek 4025 w/!,
is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
rmcup=\037com 33\r, smcup=!com 31\r,
use=tek4025,
tek4105|tektronix 4105,
am, mir, msgr, ul, xenl, xt,
cols#79, it#8, lines#29,
acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
smul=\E[=5;<2m, tbc=\E[1g,
# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
tek4105-30|4015 emulating 30 line vt100,
am, mir, msgr, xenl, xon,
cols#80, it#8, lines#30, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, ka1=\EOq,
ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy,
kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
# Tektronix 4105 from BRL
# The following setup modes are assumed for normal operation:
# CODE ansi CRLF no DABUFFER 141
# DAENABLE yes DALINES 30 DAMODE replace
# DAVISIBILITY yes ECHO no EDITMARGINS 1 30
# FLAGGING input INSERTREPLACE replace LFCR no
# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
# SELECTCHARSET G1 0 TABS -2
# Other setup modes may be set for operator convenience or communication
# requirements; I recommend
# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
# XMTDELAY 0
# and factory color maps. After setting these modes, save them with NVSAVE. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# "IC" cannot be used in combination with "im" & "ei".
# "tek4105a" is just a guess:
tek4105a|Tektronix 4105,
msgr, xon,
cols#80, it#8, lines#30, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, sc=\E7,
sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
#
# Tektronix 4106/4107/4109 from BRL
# The following setup modes are assumed for normal operation:
# CODE ansi COLUMNMODE 80 CRLF no
# DABUFFER 141 DAENABLE yes DALINES 32
# DAMODE replace DAVISIBILITY yes ECHO no
# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
# LFCR no LOCKKEYBOARD no ORIGINMODE relative
# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
# TABS -2
# Other setup modes may be set for operator convenience or communication
# requirements; I recommend
# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
# XMTDELAY 0
# and factory color maps. After setting these modes, save them with NVSAVE. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
# "IC" cannot be used in combination with "im" & "ei".
tek4106brl|tek4107brl|tek4109brl|Tektronix 4106, 4107, or 4109,
msgr, xon,
cols#80, it#8, lines#32, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
tek4107|tek4109|tektronix terminals 4107 4109,
am, mir, msgr, ul, xenl, xt,
cols#79, it#8, lines#29,
bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m\E%%!0,
sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
smul=\E%!1\E[4m$<2>\E%!0,
# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
# see the note attached to tek4207.
tek4207-s|Tektronix 4207 with sysline but no memory,
eslok, hs,
dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
is2=\E7\E[?6l\E[2K\E[?6h\E8,
tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
# The 4110 series may be a wonderful graphics series, but they make the 4025
# look good for screen editing. In the dialog area, you can't move the cursor
# off the bottom line. Out of the dialog area, ^K moves it up, but there
# is no way to scroll.
#
# Note that there is a floppy for free from Tek that makes the
# 4112 emulate the vt52 (use the vt52 termcap). There is also
# an expected enhancement that will use ANSI standard sequences.
#
# 4112 in non-dialog area pretending to scroll. It really wraps
# but vi is said to work (more or less) in this mode.
#
# 'vi' works reasonably well with this entry.
#
otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
am,
cols#80, lines#34,
bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
# The 4112 with the ANSI compatibility enhancement
tek4112|tek4114|tektronix 4110 series,
am, db,
cols#80, lines#34,
cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
tek4112-nd|4112 not in dialog area,
cuu1=^K, use=tek4112,
tek4112-5|4112 in 5 line dialog area,
lines#5, use=tek4112,
# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
# previously \0410 and \0411 sequences...I don't *think* they were supposed
# to be 4-digit octal -- esr)
tek4113|tektronix 4113 color graphics with 5 line dialog area,
am, da, eo,
cols#80, lines#5,
clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
lines#34,
is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
# :vb: needs enough delay to let you see the background color being toggled.
tek4113-nd|tektronix 4113 color graphics with no dialog area,
am, eo,
cols#80, it#8, lines#34,
clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
cvvis=\ELZ\EKA0,
flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
# This entry is from Tek. Inc. (Brian Biehl)
# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
otek4115|Tektronix 4115,
am, da, db, eo,
cols#80, it#8, lines#34,
cbt=\E[Z, clear=\E[H\E[2J,
cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
il1=\E[L,
is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
kbs=^H, ri=\EM, rmam=\E[?7l,
rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
smul=\E[4m,
tek4115|newer tektronix 4115 entry with more ANSI capabilities,
am, xon,
cols#80, lines#34,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
rmso=\E[m, rmul=\E[m,
sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
vpa=\E[%p1%{1}%+%dd,
# The tek4125 emulates a vt100 incorrectly - the scrolling region
# command is ignored. The following entry replaces <csr> with the needed
# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
# chokes on; and adds a lot of initialization for the tek dialog area.
# Note that this entry uses all 34 lines and sets the cursor color to green.
# Steve Jacobson 8/85
# (tek4125: there were two "\!"s in the is that I replaced with "\E!";
# commented out, <smir>=\E1 because there's no <rmir> -- esr)
tek4125|tektronix 4125,
lines#34,
csr@, dl1=\E[1M, il1=\E[1L,
is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
rc@, sc@, smkx=\E=,
use=vt100,
# From: <jcoker@ucbic>
# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
# supplied another, less capable 4107 entry. So we'll use that for 4107 and
# note that if jcoker wasn't confused you may be able to use this one.
# I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
tek4207|Tektronix 4207 graphics terminal with memory,
am, bw, mir, msgr, ul, xenl,
cols#80, it#8, lines#32,
blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
rev=\E[7m, ri=\E[T,
rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
smul=\E[4m, tbc=\E[1g,
# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
# Tab had been given as \E2I,that must be the tab-set capability -- esr)
tek4404|tektronix 4404,
cols#80, it#8, lines#32,
blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
# Some unknown person wrote:
# I added the is string - straight Unix has ESC ; in the login
# string which sets a ct8500 into monitor mode (aka 4025 snoopy
# mode). The is string here cleans up a few things (but not
# everything).
ct8500|tektronix ct8500,
am, bw, da, db,
cols#80, lines#25,
bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
# Tektronix 4205 terminal.
#
# am is not defined because the wrap around occurs not when the char.
# is placed in the 80'th column, but when we are attempting to type
# the 81'st character on the line. (esr: hmm, this is like the vt100
# version of xenl, perhaps am + xenl would work!)
#
# Bold, dim, and standout are simulated by colors and thus not allowed
# with colors. The tektronix color table is mapped into the RGB color
# table by setf/setb. All colors are reset to factory specifications by oc.
# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
# interval then maps into pre-defined value.
tek4205|tektronix 4205,
ccc, mir, msgr,
colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
initc=\E%%!0\n\ETF4\n%?%p1%{0}%=%t0\n%e%p1%{1}%=%t4\n%e%p1%{2}%=%t3\n%e%p1%{3}%=%t5\n%e%p1%{4}%=%t2\n%e%p1%{5}%=%t6\n%e%p1%{6}%=%t7\n%e1%;\n%?%p2%{125}%<%t0\n%e%p2%{250}%<%tA2\n%e%p2%{375}%<%tA?\n%e%p2%{500}%<%tC8\n%e%p2%{625}%<%tD4\n%e%p2%{750}%<%tE1\n%e%p2%{875}%<%tE\:\n%eF4%;\n%?%p3%{125}%<%t0\n%e%p3%{250}%<%tA2\n%e%p3%{375}%<%tA?\n%e%p3%{500}%<%tC8\n%e%p3%{625}%<%tD4\n%e%p3%{750}%<%tE1\n%e%p3%{875}%<%tE\:\n%eF4%;\n%?%p4%{125}%<%t0\n%e%p4%{250}%<%tA2\n%e%p4%{375}%<%tA?\n%e%p4%{500}%<%tC8\n%e%p4%{625}%<%tD4\n%e%p4%{750}%<%tE1\n%e%p4%{875}%<%tE\:\n%eF4%;\n\E%%!1,
invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
kf7=\ES,
oc=\E%!0\n\ETFB0\n0000\n1F4F4F4\n2F400\n30F40\n4A4C<F4\n50F4F4\n6F40F4\n7F4F40\n\E%!1,
op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
setb=\E[=%?%p1%{0}%=%t0m\n%e%p1%{1}%=%t4m\n%e%p1%{2}%=%t3m\n%e%p1%{3}%=%t5m\n%e%p1%{4}%=%t2m\n%e%p1%{5}%=%t6m\n%e%p1%{6}%=%t7m\n%e1m%;,
setf=\E[<%?%p1%{0}%=%t0m\n%e%p1%{1}%=%t4m\n%e%p1%{2}%=%t3m\n%e%p1%{3}%=%t5m\n%e%p1%{4}%=%t2m\n%e%p1%{5}%=%t6m\n%e%p1%{6}%=%t7m\n%e1m%;,
sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
smul=\E[4m, tbc=\E[1g,
#### Teletype (tty)
#
# These are the hardcopy Teletypes from before AT&T bought the company,
# clattering electromechanical dinosaurs in Bakelite cases that printed on
# pulpy yellow roll paper. If you remember these you go back a ways.
# Teletype-branded VDTs are listed in the AT&T section.
#
# The earliest UNIXes were designed to use these clunkers; nroff and a few
# other programs still default to emitting codes for the Model 37.
#
tty33|tty35|model 33 or 35 teletype,
hc, os, xon,
cols#72,
bel=^G, cr=^M, cud1=^J, ind=^J,
tty37|model 37 teletype,
hc, os, xon,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
ind=^J,
# There are known to be at least three flavors of the tty40, all seem more
# like IBM half duplex forms fillers than ASCII terminals. They have lots of
# awful braindamage, such as printing a visible newline indicator after each
# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
# braindamaged but has hope and is described here. The 40-4 is a 3270
# lookalike and beyond hope. The terminal has visible bell but I don't know
# it - it's null here to prevent it from showing the BL character.
# There is an \EG in <nl> because of a bug in old vi (if stty says you have
# a "newline" style terminal (-crmode) vi figures all it needs is nl
# to get crlf, even if <cr> is not ^M.)
# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
xon,
cols#80, lines#24,
clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
tty43|model 43 teletype,
am, hc, os, xon,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
#### Tymshare
#
# You can add <is2=\E<> to put this 40-column mode, though I can't
# for the life of me think why anyone would want to.
scanset|sc410|sc415|Tymshare Scan Set,
am, bw, msgr,
cols#80, lines#24,
acsc=l<m-k4j%q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
#### Volker-Craig (vc)
#
# If you saw a Byte Magazine cover with a terminal on it during the early
# 1980s, it was probably one of these. Carl Helmers liked them because
# they could crank 19.2 and were cheap (that is, until he tried to program
# one...)
#
# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
# every other linefeed.
vc303|vc103|vc203|volker-craig 303,
am,
cols#80, lines#24,
bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
kcuu1=^N, ll=\017$<1>W,
vc303a|vc403a|volker-craig 303a,
clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
vc404|volker-craig 404,
am,
cols#80, lines#24,
bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
vc404-s|volker-craig 404 w/standout mode,
cud1=^J, rmso=^O, smso=^N, use=vc404,
# From: <wolfgang@cs.sfu.ca>
# (vc414: merged in cup/dl1/home from an old vc414h-noxon)
vc414|vc414h|Volker-Craig 414H in sane escape mode.,
am,
cols#80, lines#24,
clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
rmso=\E^_, smso=\E^Y,
vc415|volker-craig 415,
clear=^L, use=vc404,
######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
#
#### IBM PC and clones
#
# The pcplot IBM-PC terminal emulation program is really messed up. It is
# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
# doesn't support scrolling regions, ignores add line commands, and ignores
# delete line commands. Consequently, the resulting behavior looks like a
# crude adm3a-type terminal.
# Steve Jacobson 8/85
pcplot|pc-plot terminal emulation program,
xenl@,
csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
# I've found that my KayPro II, running MDM730, continues to emulate an
# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
# system the following termcap entry works well:
# I have noticed a couple of minor glitches, but nothing I can't work
# around. (I added two capabilities from the BRL entry -- esr)
kaypro|kaypro2|kaypro II,
am,
cols#80, lines#24,
bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
# From IBM, Thu May 5 19:35:27 1983
# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
ibmpc|ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
am,
cols#80, lines#24,
bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
#### Apple II
#
# Apple II firmware console first, then various 80-column cards and
# terminal emulators. For two cents I'd toss all these in the UFO file
# along with the 40-column apple entries.
#
# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
# 'it#8' tells UNIX that you have tabs every 8 columns. This is a
# function of TIC, not the firmware.
# The clear key on a IIgs will do something like clear-screen,
# depending on what you're in.
appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
am, bw, eo, msgr,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
smso=^O,
# Apple //e with 80-column card, entry from BRL
# The modem interface is permitted to discard LF (maybe DC1), otherwise
# passing characters to the 80-column firmware via COUT (PR#3 assumed).
# Auto-wrap does not work right due to newline scrolling delay, which also
# requires that you set "stty cr2".
# Note: Cursor addressing is only available via the Pascal V1.1 entry,
# not via the BASIC PR#3 hook. All this nonsense can be avoided only by
# using a terminal emulation program instead of the built-in firmware.
apple2e|Apple //e,
bw, msgr,
cols#80, lines#24,
bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
smso=^O,
# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
# 4.20, with incoming and outgoing terminals both on 0, emulation On.
apple2e-p|Apple //e via Pascal,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
kcud1=^J,
use=apple2e,
# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
# Enable DC3/DC1 flow control with "stty ixon -ixany".
apple-ae|ASCII Express,
am, bw, msgr, nxon, xon,
cols#80, it#8, lines#24,
bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
smso=^O,
appleII|apple ii plus,
am,
cols#80, it#8, lines#24,
clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
smso=^O,
# Originally by Gary Ford 21NOV83
# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
apple-80|apple II with smarterm 80 col,
am, bw,
cols#80, lines#24,
cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
ed=\013$<10*/>, el=\035$<10/>, home=^Y,
apple-soroc|apple emulating soroc 120,
am,
cols#80, lines#24,
bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
# From Peter Harrison, Computer Graphics Lab, San Francisco
# ucbvax!ucsfmis!harrison .....uucp
# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
# "These two work. If you don't have the inverse video chip for the
# Apple with videx then remove the :so: and :se: fields."
# (apple-videx: this used to be called DaleApple -- esr)
apple-videx|Apple with videx videoterm 80 column board with inverse video,
am, xenl,
cols#80, it#8, lines#24,
clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
rmso=^Z2, sgr0=^Z2, smso=^Z3,
# My system [for reference] : Apple ][+, 64K, Ultraterm display card,
# Apple Cat ][ 212 modem, + more all
# controlled by ASCII Express: Pro.
# From Dave Shaver <isucs1!shaver>
apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
am, eo, xt,
cols#80, lines#24,
acsc=, clear=^L, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
flash=^W35^W06, home=^Y,
is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
rmso=^N, smso=^O,
apple-uterm|Ultraterm for Apple micros,
am, eo, xt,
cols#80, lines#24,
acsc=, clear=^L, cuf1=^\,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
# from trwrba!bwong (Bradley W. Wong):
#
# This entry assumes that you are using an apple with the UCSD Pascal
# language card. SYSTEM.MISCINFO is assumed to be the same as that
# supplied with the standard apple except that screenwidth should be set
# using SETUP to 80 columns. Note that the right arrow in not mapped in
# this termcap entry. This is because that key, on the Apple, transmits
# a ^U and would thus preempt the more useful "up" function of vi.
#
# HMH 2/23/81
apple80p|80-column apple with Pascal card,
am, bw,
cols#80, lines#24,
clear=^Y^L, cuf1=^\\:,
cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
home=^Y, kcub1=^H,
#
# Apple II+ equipped with Videx 80 column card
#
# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
# manually converted by D A Gwyn
#
# DO NOT use any terminal emulation with this data base, it works directly
# with the Videx card. This has been tested with vi 1200 baud and works fine.
#
# This works great for vi, except I've noticed in pre-R2, ^U will scroll back
# 1 screen, while in R2 ^U doesn't.
# For inverse alternate character set add:
# <smacs>=^O:<rmacs>=^N:
# (apple-v: added it#8 -- esr)
apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
am, xenl,
cols#80, it#8, lines#24,
bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
khome=^Y, rmso=^Z2, smso=^Z3,
apple-videx3|vapple|Apple II with 80 col card,
am,
cols#80, lines#24,
clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%, kf9=\E&, khome=\EH,
#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
aepro|Apple II+ running ASCII Express Pro--vt52,
cols#80, lines#24,
clear=\014$<300/>, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, home=\EH,
# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
apple-vm80|ap-vm80|apple with viewmax-80,
cols#80, lines#24,
clear=\014$<300/>, cuf1=^\\:,
cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
ed=\013$<300/>, el=^], home=\031$<200/>,
#### Apple Lisa & Macintosh
#
# (lisa: changed <cvvis> to <cnorm> -- esr)
lisa|apple lisa console display (black on white),
am, eo, msgr,
cols#88, it#8, lines#32,
acsc=lfmekcjdttuvvuwsqax`nb, civis=\E[5h, clear=^L,
cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
liswb|apple lisa console display (white on black),
is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
smso=\E[m, smul=\E[4m, use=lisa,
# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
# <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
#
# These entries assume that the 'Auto Wraparound' is enabled.
# Xon-Xoff flow control should also be enabled.
#
# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
# settings are in non-volatile memory and don't need to be reset upon login.
# Also setting the number of columns glitches the screen annoyingly.
# You can type "reset" to get them set.
#
lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
am, xenl, xon,
cols#80, it#8, lines#24, vt#3,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
tbc=\E[3g,
# Lisaterm in 132 column ("wide") mode.
lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
cols#132,
kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
# Although MacTerminal has insert/delete line, it is commented out here
# since it is much faster and cleaner to use the "lock scrolling region"
# method of inserting and deleting lines due to the MacTerminal implementation.
# Also, the "Insert/delete ch" strings have an extra character appended to them
# due to a bug in MacTerminal V1.1. Blink is disabled since it is not
# supported by MacTerminal.
mac|macintosh|Macintosh with MacTerminal,
xenl,
blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
# Lisaterm in 132 column ("wide") mode.
mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
cols#132, use=mac,
#### Radio Shack/Tandy
#
# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
am,
cols#80, it#8, lines#24,
bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
sgr0=\037!\E\:\200, smso=^_\s, smul=^_",
# (trs2: removed obsolete ":nl=^_:" -- esr)
trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
am, msgr,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
# (This had extension capabilities
# :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
# :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
trs16|trs-80 model 16 console,
am,
cols#80, it#8, lines#24,
acsc=l_mbk`javewcquxs, bel=^G, civis=\ERc, clear=^L,
cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
smacs=\ERG, smso=\ERD,
#### Atari ST
#
# From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
atari|atari st,
am,
cols#80, it#8, lines#25,
clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
lines#49,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
# MiNT VT52 emulation. 80 columns, 25 rows.
# MiNT is Now TOS, the operating system which comes with all Ataris now
# (mainly Atari Falcon). This termcap is for the VT52 emulation you get
# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
st52|Atari ST with VT52 emulation,
am, km,
cols#80, lines#25,
bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
smcup=\Ee, smso=\Ep,
#### Commodore Business Machines
#
# Formerly located in West Chester, PA; went spectacularly bust in 1994
# after years of shaky engineering and egregious mismanagement. Made one
# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
# C-128, VIC-20). The C-64 is said to have been the most popular machine
# ever (most units sold); they can still be found gathering dust in closets
# everywhere.
#
# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
# Added a few more entries, converted caret-type control sequence (^x) entries
# to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
#
# :as:, :ae: Support for alternate character sets.
# :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
# :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
# This one appears to fix a problem I always had with a line ending
# at 'width+1' (I think) followed by a blank line in vi. The blank
# line tended to disappear and reappear depending on how the screen
# was refreshed. Note that this is probably needed only if you use
# something like a Dnet Fterm with the window sized to some peculiar
# dimension larger than 80 columns.
# :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
# (amiga: removed obsolete :kn#10:,
# also added empty <acsc> to suppress a warning --esr)
amiga-old|Amiga ANSI,
am, bw, xenl,
cols#80, lines#24,
acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\E9~, kf1=\E0~,
kf2=\E1~, kf3=\E2~, kf4=\E3~, kf5=\E4~, kf6=\E5~, kf7=\E6~,
kf8=\E7~, kf9=\E8~, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
rmacs=^O, rmso=\E[m, rmul=\E[m, rs1=\Ec, sgr0=\E[m, smacs=^N,
smso=\E[7m, smul=\E[4m,
# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
# (amiga: added empty <acsc> to suppress a warning --esr)
amiga|Amiga ANSI,
bw, msgr,
cols#80, lines#24,
acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
smso=\2337m, smul=\2334m,
# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
# I'm trying to write a termcap for a commodore b-128, and I'm
# having a little trouble. I've had to map most of my control characters
# to something that unix will accept (my delete-char is a ctrl-t, etc),
# and create some functions (like cm), but thats life.
# The problem is with the arrow keys - right, and up work fine, but
# left deletes the previous character and down I just can't figure out.
# Jove knows what I want, but I don't know what it's sending to me (it
# isn't thats bound to next-line in jove).
# Anybody got any ideas? Here's my termcap.
# DAG -- I changed his "^n" entries to "\n"; see if that works.
#
commodore|b-128|Commodore B-128 micro,
am, bw,
cols#80, lines#24, pb#150,
clear=\E\006$<10/>, cr=^M, cud1=^J, cuf1=^F,
cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
smir=,
#### North Star
#
# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
northstar|North Star Advantage,
cols#80, lines#24,
clear=\004$<200/>,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
el=\016$<200/>, home=\034\032$<200/>,
#### Osborne
#
# Thu Jul 7 03:55:16 1983
#
# As an aside, be careful; it may sound like an anomaly on the
# Osborne, but with the 80-column upgrade, it's too easy to
# enter lines >80 columns!
#
# I've already had several comments...
# The Osborne-1 with the 80-col option is capable of being
# 52, 80, or 104 characters wide; default to 80 for compatibility
# with most systems.
#
# The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
osborne-w|osborne1-w|osborne I in 104-column mode,
msgr, ul, xt,
cols#104, lines#24,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
# Osborne I from ptsfa!rhc (Robert Cohen) via BRL
osborne|osborne1|osborne I in 80-column mode,
am, mir, msgr, ul, xhp,
cols#80, lines#24,
clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
dch1=\\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
#
# Osborne Executive definition from BRL
# Similar to tvi920
# Added by David Milligan and Tom Smith (SMU)
osexec|Osborne executive,
am,
cols#80, lines#24, xmc#1,
bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
smul=\El, tbc=\E3,
#### Console types for obsolete UNIX clones
#
# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
# machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
# were commercial, Minix an educational tool sold in conjunction with a book.
# Memory-segmentation limits and a strong tendency to look like V7 long after
# it was obsolete made all three pretty lame. Venix croaked early. Coherent
# and Minix were ported to 32-bit Intel boxes, only to be run over by a
# steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
# are also, I'm told, Minix ports that ran on Amiga and Atari machines and
# even as single processes under SunOS and the Macintosh OS.
#
# This is the entry provided with minix 1.7.4, with bogus :ri: removed.
minix|minix console (v1.7),
am, xenl,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
minix-old|minix console (v1.5),
xon,
cols#80, it#8, lines#25,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
# The linewrap option can be specified by editing /usr/include/minix/config.h
# before recompiling the minix 1.5 kernel.
minix-old-am|minix console with linewrap,
am, use=minix-old,
pc-minix|minix console on an Intel box,
use=klone+acs, use=minix,
# According to the Coherent 2.3 manual, the PC console is similar
# to a z19. The differences seem to be (1) 25 lines, (2) no status
# line, (3) standout is broken, (4) ins/del line is broken, (5)
# has blinking and bold.
pc-coherent|pcz19|coherent|IBM PC console running Coherent,
am, mir,
cols#80, it#8, lines#25,
bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
# According to the Venix 1.1 manual, the PC console is similar
# to a DEC vt52. Differences seem to be (1) arrow keys send
# different strings, (2) enhanced standout, (3) added insert/delete line.
# Note in particular that it doesn't have automatic margins.
# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
# not described here because this derives from an old termcap entry.
pc-venix|venix|IBM PC console running Venix,
cols#80, it#8, lines#25,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
#### Miscellaneous microcomputer consoles
#
# If you know anything more about any of these, please tell me.
#
# basis from Peter Harrison, Computer Graphics Lab, San Francisco
# ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
basis|BASIS108 computer with terminal translation table active,
clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
smso=\E(,
use=adm3a,
# luna's BMC terminal emulator
luna|luna68k|LUNA68K Bitmap console,
cols#88, lines#46, use=ansi-mini,
megatek|pegasus workstation terminal emulator,
am, os,
cols#83, lines#60,
# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
# interface (pre-Macintosh by several years) that went nowhere.
xerox820|x820|Xerox 820,
am,
cols#80, lines#24,
bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
home=^^, ind=^J,
#### Videotex and teletext
#
# \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
# \E[?3l 80 columns
# \E[?4l scrolling on
# \E[12h local echo off
# \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
# \E)0 G1 DEC set (line graphics)
#
# From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
eslok, hs, xenl,
cols#80, it#8, lines#24, wsl#72, xmc#0,
acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=^J,
ip=$<7/>, is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rin=\EM,
rmacs=^O, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
u6=\E[%i%d;%dR, u7=\E[6n,
######## OBSOLETE VDT TYPES
#
# These terminals are *long* dead -- these entries are retained for
# historical interest only.
#### Amtek Business Machines
#
# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
# but these caps were commented out in 8.3; also, removed overridden
# ":do=^J:" -- esr)
abm80|amtek business machines 80,
am, bw,
cols#80, lines#24,
cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
#### Bell Labs blit terminals
#
# These were AT&T's official entries. The 5620 FAQ maintained by
# David Breneman <daveb@dgtl.com> has this to say:
#
# Actually, in the beginning was the Jerq, and the Jerq was white with a
# green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
# was good. But lo, upon the horizon loomed a mighty management-type person
# (known now only by the initials VP) who said, the mighty Jerq must stay
# alone, and could not go forth into the world. So Locanthi and Pike put the
# Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
# world. And the Jerq lived the rest of its days in research, but never
# strayed from those paths.
#
# In all seriousness, the Blit was originally known as the Jerq, but when
# it started to be shown outside of the halls of the Bell Labs Research
# organization, the management powers that be decided that the name could
# not remain. So it was renamed to be Blit. This was in late 1981.
#
# (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
# 730, and 730+.)
#
blit|jerq|blit running teletype rom,
am, eo, ul, xon,
cols#87, it#8, lines#72,
bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
# (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
cbblit|fixterm|blit running columbus code,
cols#88,
ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
smul=\EU",
use=blit,
oblit|ojerq|first version of blit rom,
am, da, db, eo, mir, ul, xon,
cols#88, it#8, lines#72,
bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
smir=\EQ,
#### Bolt, Beranek & Newman (bbn)
#
# The BitGraph was a product of the now-defunct BBN Computer Corporation.
# The parent company, best known as the architects of the Internet, is
# still around.
#
# Entries for the BitGraph terminals. The problem
# with scrolling in vi can only be fixed by getting BBN to put
# smarter scroll logic in the terminal or changing vi or padding
# scrolls with about 500 ms delay.
#
# I always thought the problem was related to the terminal
# counting newlines in its input buffer before scrolling and
# then moving the screen that much. Then vi comes along and
# paints lines in on the bottom line of the screen, so you get
# this big white gap.
bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
use=bg2.0,
bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
use=bg2.0,
bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
xenl,
cols#85, lines#64,
bel=^G, clear=\E[H\E[J$<150>, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
sgr0=\E[m, smkx=\E=, smso=\E[7m,
bg1.25rv|bbn bitgraph 1.25 (reverse video),
flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, use=bg1.25,
bg1.25nv|bbn bitgraph 1.25 (normal video),
flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, use=bg1.25,
# (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
bg1.25|bbn bitgraph 1.25,
cols#85, lines#64,
bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
smso=\E[7m,
#### Chromatics
#
# I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
# that is smaller than the screen, and puts up a warning message
# outside the window. Te erases the warning message, puts the
# window back to be the whole screen, and puts the cursor at just
# below the small window. I defined <cnorm> and <civis> to really turn
# the cursor on and off, but I have taken this out since I don't
# like the cursor being turned off when vi exits.
cg7900|chromatics|chromatics 7900,
am,
cols#80, lines#40,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
rmso=\001C1\,\001c2\,,
smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
smso=\001C4\,\001c7\,, uc=\001\001_\001\200,
#### Computer Automation
#
ca22851|computer automation 22851,
am,
cols#80, lines#24,
bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
#### Cybernex
#
# This entry has correct padding and the undocumented "ri" capability
cyb83|xl83|cybernex xl-83,
am,
cols#80, lines#24,
bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
cyb110|mdl110|cybernex mdl-110,
am,
cols#80, lines#24,
bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
ht=\011$<43>, ich1=\016A\035$<3.5>,
il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
#### Datapoint
#
# Datapoint is gone. They used to be headquartered in Texas.
# They created ARCnet, an Ethernet competitor that flourished for a while
# in the early 1980s before 3COM got wise and cut its prices. The service
# side of Datapoint still lives (1995) in the form of Intelogic Trace.
#
dp3360|datapoint|datapoint 3360,
am,
cols#82, lines#25,
bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
ed=^_, el=^^, home=^], ind=^J,
#### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
#
# These entries are DEC's official terminfos for its older terminals.
# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
# Engineering for more information. Updated terminfos and termcaps
# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
#
gt40|dec gt40,
os,
cols#72, lines#30,
bel=^G, cr=^M, cub1=^H, cud1=^J,
gt42|dec gt42,
os,
cols#72, lines#40,
bel=^G, cr=^M, cub1=^H, cud1=^J,
vt50|dec vt50,
cols#80, lines#12,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
vt50h|dec vt50h,
cols#80, lines#12,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, ht=^I, ind=^J, ri=\EI,
# (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
vt61|vt-61|vt61.5|dec vt61,
cols#80, lines#24,
bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
ri=\E$<20>I,
# The gigi does standout with red!
# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
gigi|vk100|dec gigi graphics terminal,
am, xenl,
cols#84, lines#24,
bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
el=\E[K, ht=^I, ind=^J,
is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
smul=\E[4m,
# DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
# a PC differentiated from the IBM clones. It was a total, ludicrous,
# grossly-overpriced failure (among other things, DEC's OS didn't include
# a format program, so you had to buy pre-formatted floppies from DEC at
# a hefty premium!).
pro350|decpro|dec pro console,
cols#80, it#8, lines#24,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
dw1|decwriter I,
hc, os,
cols#72,
bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
dw2|decwriter|dw|decwriter II,
hc, os,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
# \E(B Use U.S. character set (otherwise # => british pound !)
# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
# \E[w 10 char/in pitch
# \E[1;132 full width horizontal margins
# \E[2g clear all tab stops
# \E[z 6 lines/in
# \E[66t 66 lines/page (for \f)
# \E[1;66r full vertical page can be printed
# \E[4g clear vertical tab stops
# \E> disable alternate keypad mode (so it transmits numbers!)
# \E[%i%p1%du set tab stop at column %d (origin == 1)
# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
# a tab stop)
#
# The dw3 does standout with wide characters.
#
dw3|la120|decwriter III,
hc, os,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
dw4|decwriter IV,
am, hc, os,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
# These aren't official
ln03|dec ln03 laser printer,
hc,
cols#80, lines#66,
bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
smul=\E[4m,
ln03-w|dec ln03 laser printer 132 cols,
cols#132,
bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
kcud1=^J, nel=^M^J,
use=ln03,
#### Delta Data (dd)
#
# Untested. The cup sequence is hairy enough that it probably needs work.
# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
# There are BSD-derived termcap entries floating around for this puppy
# that are *certainly* wrong.
delta|dd5000|delta data 5000,
am,
cols#80, lines#27,
bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
cup=\017%p1%p1%{16}%m%{2}%*%-%'9'%+%c%p2%p2%{16}%m%{2}%*%-%'9'%+%c,
cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
#### Digital Data Research (ddr)
#
# (ddr: I added <rmam>/<smam> based on the init string -- esr)
ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
am, xenl,
cols#80, it#8, lines#24, vt#3,
blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m$<2/>,
#### Evans & Sutherland
#
# Jon Leech <leech@cs.unc.edu> tells us:
# The ps300 was the Evans & Sutherland Picture System 300, a high
# performance 3D vector graphics system with a bunch of specialized hardware.
# Approximate date of release was 1982 (early 80s, anyway), and it had several
# evolutions including (limited) color versions such as the PS330C. PS300s
# were effectively obsolete by the late 80s, replaced by raster graphics
# systems, although specialized applications like molecular modelling
# hung onto them for a while longer. AFAIK all E&S vector graphics systems
# are out of production, though of course E&S is very much alive (in 1996).
# (ps300: changed ":pt@:" to "it@" -- esr)
#
ps300|Picture System 300,
xt,
it@,
rmso@, rmul@, smso@, smul@, use=vt100,
#### General Electric (ge)
#
terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
hc, os,
cols#120,
bel=^G, cr=^M, cud1=^J, ind=^J,
#### Heathkit/Zenith
#
# Here is a description of the H19 DIP switches:
#
# S401
# 0-3 = baud rate as follows:
#
# 3 2 1 0
# --- --- --- ---
# 0 0 1 1 300 baud
# 0 1 0 1 1200 baud
# 1 0 0 0 2400 baud
# 1 0 1 0 4800 baud
# 1 1 0 0 9600 baud
# 1 1 0 1 19.2K baud
#
# 4 = parity (0 = no parity)
# 5 = even parity (0 = odd parity)
# 6 = stick parity (0 = normal parity)
# 7 = full duplex (0 = half duplex)
#
# S402
# 0 = block cursor (0 = underscore cursor)
# 1 = no key click (0 = keyclick)
# 2 = wrap at end of line (0 = no wrap)
# 3 = auto LF on CR (0 = no LF on CR)
# 4 = auto CR on LF (0 = no CR on LF)
# 5 = ANSI mode (0 = VT52 mode)
# 6 = keypad shifted (0 = keypad unshifted)
# 7 = 50Hz refresh (1 = 60Hz refresh)
#
# Factory Default settings are as follows:
# 7 6 5 4 3 2 1 0
# S401 1 0 0 0 1 1 0 0
# S402 0 0 0 0 0 0 0 0
# (h19: I added <rmam>/<smam> based on the init string;
# also added empty <acsc> to suppress a tic warning -- esr)
h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
am, mir, msgr,
cols#80, it#8, lines#24,
acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
h19-bs|heathkit w/keypad shifted,
rmkx=\Eu, smkx=\Et, use=h19-b,
h19-smul|heathkit w/keypad shifted/underscore cursor,
rmkx=\Eu, smkx=\Et,
use=h19-u,
# (h19: merged in <ip> from BSDI hp19-e entry>;
# also added empty <acsc> to suppress a tic warning --esr)
h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
am, eslok, hs, mir, msgr,
cols#80, it#8, lines#24,
acsc=, bel=^G, clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
cvvis=\Ex4, dch1=\EN, dl1=\EM$<1*>, ed=\EJ, el=\EK,
fsl=\Ek\Ey5, home=\EH, ht=^I, il1=\EL$<1*>, ind=^J,
ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW,
kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
h19-u|heathkit with underscore cursor,
cnorm@, cvvis@, use=h19-b,
h19-us|h19us|heathkit w/keypad shifted/underscore cursor,
rmkx=\Eu, smkx=\Et,
use=h19-u,
h19-g|h19g|heathkit w/block cursor,
cnorm=\Ex4, use=h19-b,
alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
lines#60,
dl1=\EM, il1=\EL, use=h19,
# The major problem with the Z29 is that it requires more padding than the Z19.
#
# The problem with declaring an H19 to be synonymous with a Z29 is that
# it needs more padding. It especially loses if a program attempts
# to put the Z29 into insert mode and insert text at 9600 baud. It
# even loses worse if the program attempts to insert tabs at 9600
# baud. Adding padding to text that is inserted loses because in
# order to make the Z29 not die, one must add so much padding that
# whenever the program tries to use insert mode, the effective
# rate is about 110 baud.
#
# What program would want to put the terminal into insert mode
# and shove stuff at it at 9600 baud you ask?
#
# Emacs. Emacs seems to want to do the mathematically optimal
# thing in doing a redisplay rather than the practical thing.
# When it is about to output a line on top of a line that is
# already on the screen, instead of just killing to the end of
# the line and outputting the new line, it compares the old line
# and the new line and if there are any similarities, it
# constructs the new line by deleting the text on the old line
# on the terminal that is already there and then inserting new
# text into the line to transform it into the new line that is
# to be displayed. The Z29 does not react kindly to this.
#
# But don't cry for too long.... There is a solution. You can make
# a termcap entry for the Z29 that says the Z29 has no insert mode.
# Then Emacs cannot use it. "Oh, no, but now inserting into a
# line will be really slow", you say. Well there is a sort of a
# solution to that too. There is an insert character option on
# the Z29 that will insert one character. Unfortunately, it
# involves putting the terminal into ansi mode, inserting the
# character, and changing it back to H19 mode. All this takes 12
# characters. Pretty expensive to insert one character, but it
# works. Either Emacs doesn't try to use its inserting hack when
# it's only given an insert character ability or the Z29 doesn't
# require padding with this (the former is probably more likely,
# but I haven't checked it out).
# (z29: added empty <acsc> to suppress a tic warning, merged in
# status line capabilities from BRL entry --esr)
z29|zenith29|z29b|zenith z29b,
am, eslok, hs, mir, msgr,
cols#80, lines#24,
acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4, cr=^M,
cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
# z29 in ansi mode. Assumes that the cursor is in the correct state, and that
# the world is stable. <rs1> causes the terminal to be reset to the state
# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
# cursor, bc -> block cursor.
# From: Mike Meyers
# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
# looks vt100-compatible -- esr)
z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
am, eslok, hs, mir, msgr,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
rmso=\E[m, rmul=\E[m,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
use=z29a,
z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
use=z29a,
z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
use=z29a,
# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
am, eslok, hs, mc5i, mir, msgr, xon,
cols#80, lines#24,
acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~0a, bel=^G,
blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
rmul=\E[0m, rs2=\E<\Ec\200, sc=\E[s, sgr0=\E[0m,
smacs=\E(0, smir=\E[4h, smkx=\E[>7h, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, tsl=\E[s\E[>1h\E[25;%i%p1%dH,
# From: Brad Brahms <Brahms@USC-ECLC>
z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
cnorm=\Ey4\Em70, cvvis=\Ex4\Em71,
use=z100bw,
# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
mir, msgr,
cols#80, it#8, lines#24,
acsc=, clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB,
cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>,
cuu1=\EA, cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>,
ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES,
kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
kf9=\EOI, khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq,
smacs=\EF, smir=\E@, smso=\Ep,
p19|h19-b with il1/dl1,
dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
# (ztx: removed duplicate :sr: -- esr)
ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
am, eslok, hs,
cols#80, it#8, lines#24,
clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
#### IMS International (ims)
#
# There was a company called IMS International located in Carson City,
# Nevada, that flourished from the mid-70s to mid-80s. They made S-100
# bus/Z80 hardware and a line of terminals called Ultimas.
#
# From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
ims950-b|bare ims950 no init string,
is2@, use=ims950,
# (ims950: removed obsolete ":ko@:" -- esr)
ims950|ims televideo 950 emulation,
xenl@,
flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@,
use=tvi950,
# (ims950-rv: removed obsolete ":ko@:" -- esr)
ims950-rv|ims tvi950 rev video,
xenl@,
flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@,
use=tvi950-rv,
ims-ansi|ultima2|ultimaII|IMS Ultima II,
am,
cols#80, it#8, lines#24,
clear=\E[H\E[2J, cub1=^H, cud1=\ED,
cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
ht=^I, if=/usr/share/tabset/vt100,
is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
smul=\E[4m,
#### Intertec Data Systems
#
# I think this company is long dead as of 1995. They made an early CP/M
# micro called the "Intertec Superbrain" that was moderately popular,
# then sank out of sight.
#
superbrain|intertec superbrain,
am, bw,
cols#80, lines#24,
bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
# and the reverse is actually true. Try it. -- esr)
intertube|intertec|Intertec InterTube,
am,
cols#80, lines#25,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
ind=^J, rmso=\E0@, smso=\E0P,
# The intertube 2 has the "full duplex" problem like the tek 4025: if you
# are typing and a command comes in, the keystrokes you type get interspersed
# with the command and it messes up
intertube2|intertec data systems intertube 2,
cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
ll=^K^X\r, vpa=\013%p1%c,
use=intertube,
#### Ithaca Intersystems
#
# This company made S100-bus personal computers long ago in the pre-IBM-PC
# past. They used to be reachable at:
#
# Ithaca Intersystems
# 1650 Hanshaw Road
# Ithaca, New York 14850
#
# However, the outfit went bankrupt years ago.
#
# The Graphos III was a color graphics terminal from Ithaca Intersystems.
# These entries were written (originally in termcap syntax) by Brian Yandell
# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
# University of Wisconsin.
# (graphos: removed obsolete and syntactically incorrect :kn=4:,
# removed <if=/usr/share/tabset/init.graphos> and
# <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
graphos|graphos III,
am, mir,
cols#80, it#8, lines#24,
clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A,
cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
smir=\E[4h, smso=\E[7m,
graphos-30|graphos III with 30 lines,
lines#30,
cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
#### Modgraph
#
# These people used to be reachable at:
#
# Modgraph, Inc
# 1393 Main Street,
# Waltham, MA 02154
# Vox: (617)-890-5796.
#
# However, if you call that number today you'll get an insurance company.
# I think Modgraph is long gone.
#
modgraph|mod24|modgraph terminal emulating vt100,
xenl@,
cols#80, lines#24,
cvvis=\E\^9;0s\E\^7;1s,
is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
rf@, ri=\EM\E[K$<5/>,
use=vt100,
# The GX-1000 manual is dated 1984. This looks rather like a VT-52.
modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
am, da, db,
cols#80, it#8, lines#24,
clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
ri=\EI$<5/>,
#
# Modgraph from Nancy L. Cider <nancyc@brl-tbd>
# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
# mark and using delete-to-killbuffer work correctly. However, we would
# like normal mode of operation to be using a Modgraph with 48 line setting.
# If we set TERM=mod (which is a valid entry in termcap with 48 lines)
# the setting mark and delete-to-killbuffer results in the deletion of only
# the line the mark is set on.
# We've discovered that the delete-to-killbuffer works correctly
# with TERM=mod and screen set to 80x48 but it's not obvious. Only
# the first line disappears but a ctrl-l shows that it did work
# correctly.
modgraph48|mod|Modgraph w/48 lines,
am, xenl,
cols#80, it#8, lines#48, vt#3,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
smso=\E[7m, smul=\E[4m,
#### Morrow Designs
#
# This was George Morrow's company. They started in the late 1970s making
# S100-bus machines. They used to be reachable at:
#
# Morrow
# 600 McCormick St.
# San Leandro, CA 94577
#
# but they're long gone now (1995).
#
# The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
# Jeff's specimen was dated June 1984.
# From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
mt70|mt-70|Morrow MD-70; native Morrow mode,
am, mir, msgr, xon,
cols#80, it#8, lines#24,
acsc=+z\,{.yOi-x`|jGkFlEmDnHtLuKvNwMxIqJ, bel=^G,
cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
rmacs=\E%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E], smul=\EG1,
tbc=\E0,
use=adm+sgr,
#### Motorola
#
# Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
# (Seth H Zirin)
ex155|Motorola Exorterm 155,
am, bw,
cols#80, lines#24,
cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
#### Omron
#
# This company is still around in 1995, manufacturing point-of-sale systems.
omron|Omron 8025AG,
am, da, db,
cols#80, lines#24,
bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
#### Ramtek
#
# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
# were competition for things like the Tektronics 4025.
#
# Ramtek 6221 from BRL, probably by Doug Gwyn
# The following SET-UP modes are assumed for normal operation:
# UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
# NEWLINE_OFF 80_COLUMNS
# Other SET-UP modes may be set for operator convenience or communication
# requirements; I recommend
# SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
# Hardware tabs are assumed to be every 8 columns; they can be set up by the
# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
# Note that the Control-E key is useless on this brain-damaged terminal. No
# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
rt6221|Ramtek 6221, 80x24,
msgr, xon,
cols#80, it#8, lines#24, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
rmso=\E[m, rmul=\E[m,
rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
rt6221-w|Ramtek 6221, 160x48,
cols#160, lines#48,
ll=\E[48;1H, use=rt6221,
#### RCA
#
# RCA VP3301 or VP3501
rca|rca vp3301/vp3501,
cols#40, lines#24,
clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
#### Selanar
#
# Selanar HiREZ-100 from BRL, probably by Doug Gwyn
# The following SET-UP modes are assumed for normal operation:
# SET_DEFAULT_TABS 48_LINES 80_COLUMNS
# ONLINE ANSI CURSOR_VISIBLE
# VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
# LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
# CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
# For use with graphics software, all graphics modes should be set to factory
# default. Other SET-UP modes may be set for operator convenience or
# communication requirements. No delays are specified; use "stty ixon -ixany"
# to enable DC3/DC1 flow control!
# I commented out the scrolling capabilities since they are too slow.
hirez100|Selanar HiREZ-100,
mir, msgr, xon,
cols#80, it#8, lines#48, vt#3,
acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
hirez100-w|Selanar HiREZ-100 in 132-column mode,
cols#132, use=hirez100,
#### Signetics
#
# From University of Wisconsin
vsc|Signetics Vsc Video driver by RMC,
am, msgr,
cols#80, it#8, lines#26,
clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
#### Soroc
#
# Alan Frisbie <frisbie@flying-disk.com> writes:
#
# As you may recall, the Soroc logo consisted of their name,
# with the letter "S" superimposed over an odd design. This
# consisted of a circle with a slightly smaller 15 degree (approx.)
# wedge with rounded corners inside it. The color was sort of
# a metallic gold/yellow.
#
# If I had been more of a beer drinker it might have been obvious
# to me, but it took a clue from their service department to make
# me exclaim, "Of course!" The circular object was the top of
# a beer can (the old removable pop-top style) and "Soroc" was an
# anagram for "Coors".
#
# I can just imagine the founders of the company sitting around
# one evening, tossing back a few and trying to decide what to
# call their new company and what to use for a logo.
#
# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
soroc120|iq120|soroc|soroc iq120,
clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
kcuf1=^L, kcuu1=^K,
use=adm3a,
soroc140|iq140|soroc iq140,
am, mir,
cols#80, lines#24,
bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
#### Southwest Technical Products
#
# These guys made an early personal micro called the M6800.
# The ct82 was probably its console terminal.
#
# (swtp: removed obsolete ":bc=^D:" -- esr)
swtp|ct82|southwest technical products ct82,
am,
cols#82, lines#20,
bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
#### Synertek
#
# Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
#
# Synertek used to make ICs, various 6502-based single-board process
# control and hobbyist computers, and assorted peripherals including a
# series of small inexpensive terminals (I think they were one of the
# first to have a "terminal-on-a-keyboard", where the terminal itself
# was only slightly larger than the keyboard).
#
# They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
# was a 40x24 terminal that could connect to a standard TV through a
# video modulator. The KTM-2/80 was the 80-column version (the 2/40
# could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
# I have a KTM-2/80 still in working order. The KTM-2s had fully
# socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
# ROM and 2 ROMs as character generators. They were incredibly simple,
# and I've never had any problems with mine (witness the fact that mine
# was made in 1981 and is still working great... I've blown the video
# output transistor a couple of times, but it's a 2N2222 :-)
#
# The KTM-3 (which is what is listed in the terminfo file) was their
# attempt at putting a KTM-2 in a box (and some models came with a
# CRT). It wasn't much different from the KTM-2 hardware-wise, but the
# control and escape sequences are very different. The KTM-3 was always
# real broken, at least according to the folks I've talked to about it.
#
# The padding in the entry is probably off--these terminals were very
# slow (it takes like 100ms for the KTM-2 to clear the screen...) And
# anyone with any sanity replaced the ROMs with something that provided
# a reasonable subset of VT100 functionality, since the usual ROMs were
# obviously very primitive... oh, you could get an upgraded ROM from
# Synertek for some incredible amount of money, but what hacker with an
# EPROM burner would do that? :)
#
# Sorry I don't have any contact info; I believe they were located in
# Sunnyvale, and I'm fairly sure they are still manufacturing ICs
# (they've gone to ASICs and FPGAs), but I doubt they're in the computer
# business these days.
#
# Tested, seems to work fine with vi.
synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
am,
cols#80, lines#24,
clear=^Z, cub1=^H, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
#### Tab Office Products
#
# TAB Products Co. - Palo Alto, California
# Electronic Office Products,
# 1451 California Avenue 94304
#
# I think they're out of business.
#
# The tab 132 uses xon/xoff, so no padding needed.
# <smkx>/<rmkx> have nothing to do with arrow keys.
# <is2> sets 80 col mode, normal video, autowrap on (for <am>).
# Seems to be no way to get rid of status line.
# The manual for this puppy was dated June 1981. It claims to be VT52-
# compatible but looks more vt100-like.
tab132|tab|tab132-15|tab 132/15,
da, db,
cols#80, lines#24, lm#96,
cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
use=vt100,
tab132-w|tab132 in wide mode,
cols#132,
is2=\E[?7h\E[?3h\E[?5l, use=tab132,
tab132-rv|tab132 in reverse-video mode,
is2=\E[?7h\E[?3l\E[?5h, use=tab132,
tab132-w-rv|tab132 in reverse-video/wide mode,
is2=\E[?7h\E[?3h\E[?5h,
use=tab132-w,
#### Teleray
#
# Research Incorporated
# 6425 Flying Cloud Drive
# Eden Prairie, MN 55344
# Vox: (612)-941-3300
#
# The Teleray terminals were all discontinued in 1992-93. RI still services
# and repairs these beasts, but no longer manufactures them. The Teleray
# people believe that all the types listed below are very rare now (1995).
# There was a newer line of Telerays (Model 7, Model 20, Model 30, and
# Model 100) that were ANSI-compatible.
#
# Note two things called "teleray". Reorder should move the common one
# to the front if you have either. A dumb teleray with the cursor stuck
# on the bottom and no obvious model number is probably a 3700.
#
t3700|dumb teleray 3700,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
t3800|teleray 3800 series,
cols#80, it#8, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
home=\EH, ht=^I, ind=^J, ll=\EY7\s,
t1061|teleray|teleray 1061,
am, km, xhp, xt,
cols#80, it#8, lines#24, xmc#1,
bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
tbc=\EG,
t1061f|teleray 1061 with fast PROMs,
dl1=\EM, il1=\EL, ip@, use=t1061,
# "Teleray Arpa Special", officially designated as
# "Teleray Arpa network model 10" with "Special feature 720".
# This is the new (1981) fast microcode updating the older "arpa" proms
# (which gave meta-key and programmable-fxn keys). 720 is much much faster,
# converts the keypad to programmable function keys, and has other goodies.
# Standout mode is still broken (magic cookie, etc) so is suppressed as no
# programs handle such lossage properly.
# Note: this is NOT the old termcap's "t1061f with fast proms."
# From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
t10|teleray 10 special,
km, xhp, xt,
cols#80, it#8, lines#24, xmc#2,
clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
ind=\Eq, pad=\200, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
smul=\ERH,
# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
# back/forth words. Put the function keys (f1-f10) where they can be
# found, and turn off the other magic keys along the top row, except
# for line/local. Do the magic appropriate to make the page shifts work.
# Also toggle ^S/^Q for those of us who use Emacs.
t16|teleray 16,
am, da, db, mir, xhp, xt,
cols#80, lines#24,
bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
smso=\E[7m, smul=\E[4m,
#### Texas Instruments (ti)
#
# The Silent 700 was so called because it was built around a quiet thermal
# printer. It was portable, equipped with an acoustic coupler, and pretty
# neat for its day.
ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
hc, os,
cols#80,
bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
#
# Texas Instruments 916 VDT 7 bit control mode
#
ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
da, db, in, msgr,
cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
cvvis=\E[?25h, dch=\E[%p1%dP$<250>, dch1=\E[P,
dl=\E[%p1%dM, ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K,
el1=\E[1K, enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p,
smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, use=vt220,
#
# Texas Instruments 916 VDT 8 bit control mode
#
ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
kich1=\233@, knp=\233S, kpp=\233T, kprt=^X,
use=ti916,
#
# Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
#
ti916-132|Texas Instruments 916 VDT vt220 132 column,
cols#132, use=ti916,
#
# Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
#
ti916-8-132|Texas Instruments 916 VDT vt220 132 column,
cols#132, use=ti916-8,
ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
am, xon,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
am, xon,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
smul=\E[4m, tbc=\E[3g,
ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
cols#132, use=ti924,
ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
cols#132, use=ti924-8,
ti931|Texas Instruments 931 VDT,
am, xon,
cols#80, lines#24,
bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
sgr0=\E4@, smso=\E4A, smul=\E4D,
ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
csr@, ind=\E[1S, ri=\E[1T,
use=ti924,
# (ti926-8: I corrected this from the broken SCO entry -- esr)
ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
csr@, ind=\2331S, ri=\2331T,
use=ti924-8,
ti_ansi|basic entry for ti928,
am, bce, eo, xenl, xon,
colors#8, cols#80, it#8, lines#25, pairs#64,
bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
setb=\E[4%p1%dm, setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m,
smul=\E[4m,
#
# 928 VDT 7 bit control mode
#
ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~,
use=ti_ansi,
#
# 928 VDT 8 bit control mode
#
ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
kpp=\233T, kprt=\23335~,
use=ti_ansi,
#### Zentec (zen)
#
# (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
# had just <smso>=\EG6 which I think means standout was supposed to be
# dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
# <invis> might work-- esr)
zen30|z30|zentec 30,
am, mir, ul,
cols#80, lines#24,
bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
smul@,
use=adm+sgr,
# (zen50: this had extension capabilities
# :BS=^U:CL=^V:CR=^B:
# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
# which were also in the original entry -- esr)
# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
zen50|z50|zentec zephyr,
am,
cols#80, lines#24, xmc#1,
clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
rmul@, smul@,
use=adm+sgr,
# CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
am, bw,
cols#80, lines#24,
blink=\EM", clear=\EH\EJ, cnorm=\EP,
csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
smso=\EM$, smul=\EM0,
######## OBSOLETE UNIX CONSOLES
#
#### Apollo consoles
#
# Apollo got bought by Hewlett-Packard. The Apollo workstations are
# labeled HP700s now.
#
# From: Gary Darland <goodmanc@garnet.berkeley.edu>
apollo|apollo console,
am, mir,
cols#88, lines#53,
clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
smso=\ES, smul=\EU, vpa=\EO+\s,
# We don't know whether or not the apollo guys replicated DEC's firmware bug
# in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
# both these capabilities.
apollo_15P|apollo 15 inch display,
rmir@, smir@, use=vt132,
apollo_19L|apollo 19 inch display,
rmir@, smir@, use=vt132,
apollo_color|apollo color display,
rmir@, smir@, use=vt132,
#### Convergent Technology
#
# Burroughs bought Convergent shortly before it merged with Univac.
# CTOS is (I believe) dead. Probably the aws is too (this entry dates
# from 1991 or earlier).
#
# Convergent AWS workstation from Gould/SEL UTX/32 via BRL
# (aws: removed unknown :dn=^K: -- esr)
aws|Convergent Technologies AWS workstation under UTX,Xenix,
am,
cols#80, lines#28, xmc#0,
acsc=, clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c,
cuu1=^A, dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
vpa=\EV%p1%c,
awsc|Convergent Technologies AWS workstation under CTOS,
am,
cols#80, lines#24, xmc#0,
acsc=, clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c,
cuu1=^A, ed=\EEF, el=\EEL, kbs=^H, kcub1=^N, kcud1=^K,
kcuf1=^R, kcuu1=^A, rmacs=\EAAF, rmso=\EAA, rmul=\EAA,
smacs=\EAAN, smso=\EAE, smul=\EAC,
#### DEC consoles
#
# The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
# The digital uVax II's had a graphic display called a qdss. It was
# supposed to be a high performance graphic accelerator, but it was
# late to market and barely appeared before faster dumb frame buffers
# appeared. I have only used this display while running X11. However,
# during bootup, it was in text mode, and probably had a terminal emulator
# within it. And that is what your termcap entry is for. In graphics
# mode the screen size is 1024x864 pixels.
qdss|qdcons|qdss glass tty,
am,
cols#128, lines#57,
clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
cup=\E=%p1%c%p2%c, cuu1=^K,
#### Fortune Systems consoles
#
# Fortune made a line of 68K-based UNIX boxes that were pretty nifty
# in their day; I (esr) used one myself for a year or so around 1984.
# They had no graphics, though, and couldn't compete against Suns and
# the like. R.I.P.
#
# From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
# (This had extension capabilities
# :rv=\EH:re=\EI:rg=0:GG=0:\
# :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
# :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
# :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
# It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
# ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
# to force both magic cookie glitches off. Once upon a time, I
# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
# function keys; thus the "Al" value for HM was certainly an error. I renamed
# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
# names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
fos|fortune|Fortune system,
am, bw,
cols#80, lines#25,
acsc=l m"k(j*v%w#q&x-, bel=^G, blink=\EN, civis=\E],
clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
smso=^\H`, smul=^\HP,
#### Masscomp consoles
#
# Masscomp has gone out of business. Their product line was purchased by
# comany in Georgia (US) called "XS International", parts and service may
# still be available through them.
#
# (masscomp: ":MT:" changed to ":km:"; -- esr)
masscomp|masscomp workstation console,
km, mir,
cols#80, it#8, lines#24,
clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
masscomp1|masscomp large screen version 1,
cols#104, lines#36, use=masscomp,
masscomp2|masscomp large screen version 2,
cols#64, lines#21, use=masscomp,
######## OTHER OBSOLETE TYPES
#
# These terminals are *long* dead -- these entries are retained for
# historical interest only.
#
#### Obsolete non-ANSI software emulations
#
# CTRM terminal emulator
# 1. underlining is not allowed with colors: first, is is simulated by
# black on white, second, it disables background color manipulations.
# 2. BLINKING, REVERSE and BOLD are allowed with colors,
# so we have to save their status in the static registers A, B and H
# respectively, to be able to restore them when color changes
# (because any color change turns off ALL attributes)
# 3. <bold> and <rev> sequences alternate modes,
# rather then simply entering them. Thus we have to check the
# static register B and H to determine the status, before sending the
# escape sequence.
# 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
# and then reset colors
# 5. implementation of the protect mode would badly penalize the performance.
# we would have to use \E&bn sequence to turn off colors (as well as all
# other attributes), and keep the status of protect mode in yet another
# static variable. If someone really needs this mode, they would have to
# create another terminfo entry.
# 6. original color-pair is white on black.
# store the information about colors into static registers
# 7. set foreground color. it performs the following steps.
# 1) turn off all attributes
# 2) turn on the background and video attributes that have been turned
# on before (this information is stored in static registers X,Y,Z,A,B,H,D).
# 3) turn on foreground attributes
# 4) store information about foreground into U,V,W static registers
# 8. turn on background: similar to turn on foreground above
ctrm|C terminal emulator,
am, bce, xon,
colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
pairs#63, pb#19200, vt#6,
bel=^G, blink=\E&dA%{1}%PA,
bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
op=\E&bn\E&bB\E&bG\E&bR\n%{0}%PX%{0}%PY%{0}%PZ\n%{1}%PW%{1}%PV%{1}%PU,
rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
setb=\E&bn\n%?%gA%t\E&dA%;\n%?%gB%t\E&dB%;\n%?%gH%t\E&dH%;\n%?%gU%t\E&bR%;\n%?%gV%t\E&bG%;\n%?%gW%t\E&bB%;\n\n%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ\n%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY\n%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
setf=\E&bn\n%?%gA%t\E&dA%;\n%?%gB%t\E&dB%;\n%?%gH%t\E&dH%;\n%?%gX%t\E&br%;\n%?%gY%t\E&bg%;\n%?%gZ%t\E&bb%;\n\n%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW\n%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV\n%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH\n%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;\n%?%p4%t\E&dA%{1}%PA%;\n%?%p6%t\E&dH%{1}%PH%;\n%?%p2%t\E&dD%;,
sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
# gs6300 - can't use blue foreground, it clashes with underline;
# it's simulated with cyan
# Bug: The <op> capability probably resets attributes.
# (gs6300: commented out <rmln> (no <smln>) --esr)
gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
am, bce, msgr, xon,
colors#8, cols#80, it#8, lines#24, pairs#63,
acsc=\,\,..--++``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
setf=\E[?%?%p1%{0}%=%t0\n%e%p1%{1}%=%t2\n%e%p1%{1}%-%d%;m,
sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
# From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
# MS-Kermit with Heath-19 emulation mode enabled
# (h19k: changed ":pt@:" to ":it@"
h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
am@, da, db, xt,
it@,
ht@, use=h19-u,
# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
# Software (formerly Peripherals Computers & Supplies, Inc) of
# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
# also be reached at support@synergy.com.
versaterm|versaterm vt100 emulator for the macintosh,
am, xenl,
cols#80, it#8, lines#24,
bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
smul=\E[4m$<2/>,
# From: Rick Thomas <ihnp4!btlunix!rbt>
# (xtalk: I added <rmam>/<smam> based on the init string.
# I also removed <xmc#1> and the trailing \s characters from the highlight
# changers, I don't believe these on a VT100-emulating PC display -- esr)
xtalk|IBM PC with xtalk communication program (versions up to 3.4),
am, mir, msgr, xon,
cols#80, it#8, lines#24, vt#3,
acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
il1=\E[L$<99>, ind=^J, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H,
kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\EOx,
kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv,
kf8=\EOl, kf9=\EOw, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
rmkx=\E[?1l\E>, rmso=\E[m,
rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
tbc=\E[3g,
# The official PC terminal emulator program of the AT&T Product Centers.
# Note - insert mode commented out - doesn't seem to work on AT&T PC.
simterm|attpc running simterm,
am,
cols#80, lines#24,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
#### Daisy wheel printers
#
# This section collects Diablo, DTC, Xerox, Qume, and other daisy
# wheel terminals. These are now largely obsolete.
#
# (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
hc, os,
cols#132, it#8,
cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
cols#124,
is2=\r \E9, use=diablo1620,
# (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
use=diablo1620,
# (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
# file -- esr)
diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
cols#124,
rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
use=diablo1640-lm,
# DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
# <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\200>.
# The terminal has tabs, but I'm getting tired of fighting the braindamage.
# If no tab is set or the terminal's in a bad mood, it glitches the screen
# around all of memory. Note that return puts a blank ("a return character")
# in the space the cursor was at, so we use ^P return (and thus ^P newline for
# newline). Note also that if you turn off :pt: and let Unix expand tabs,
# curses won't work (some old BSD versions) because it doesn't clear this bit,
# and cursor addressing sends a tab for row/column 9. What a losing terminal!
# I have been unable to get tabs set in all 96 lines - it always leaves at
# least one line with no tabs in it, and once you tab through that line,
# it completely weirds out.
# (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
dtc382|DTC 382,
am, da, db, xhp,
cols#80, lines#24, lm#96,
bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
rmul=^P \200, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
dtc300s|DTC 300s,
hc, os,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
gsi|mystery gsi terminal,
hc, os,
cols#132,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
ind=^J,
aj830|aj832|aj|anderson jacobson,
hc, os,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
ind=^J,
# From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
aj510|Anderson-Jacobson model 510,
am, mir,
cols#80, lines#24,
clear=^L, cub1=^H, cuf1=\EX,
cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
smul=\E"U,
# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
# This is incomplete, but it's a start.
nec5520|nec|spinwriter|nec 5520,
hc, os,
cols#132, it#8,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
kbs=^H, tbc=\E3,
qume5|qume|Qume Sprint 5,
hc, os,
cols#80, it#8,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
# I suspect the xerox 1720 is the same as the diablo 1620.
xerox1720|x1720|x1750|xerox 1720,
hc, os,
cols#132, it#8,
bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
tbc=\E2,
#### Miscellaneous obsolete terminals, manufacturers unknown
#
# If you have any information about these (like, a manufacturer's name,
# and a date on the serial-number plate) please send it!
cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
am,
cols#73, lines#36,
clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
am,
cols#85, lines#39,
clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
kf4=\E8, rmso=\Em^C, smso=\Em^L,
cops10|cops|cops-10|cops 10,
am, bw,
cols#80, lines#24,
bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
khome=^Y,
# (d132: removed duplicate :ic=\E5:,
# merged in capabilities from a BRL entry -- esr)
d132|datagraphix|datagraphix 132a,
da, db, in,
cols#80, lines#30,
bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
# The d800 was an early portable terminal from c.1984-85 that looked a lot
# like the original Compaq `lunchbox' portable (but no handle). It had a vt220
# mode (which is what this entry looks like) and several other lesser-known
# emulations.
d800|Direct 800/A,
am, da, db, msgr, xhp,
cols#80, it#8, lines#24,
acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smacs=\E[1m, smso=\E[7m, smul=\E[4m,
digilog|digilog 333,
cols#80, lines#16,
bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
home=^N, ind=^J,
# The DWK was a terminal manufactured in the Soviet Union c.1986
dwk|dwk-vt|dwk terminal,
am,
cols#80, it#8, lines#24,
acsc=lJmFkCjXtEuPv\\wKqUxWnNo~s_`+a\:f'g#~_\\\,Q+\^.M-Sh#I#0\177,
bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, dch1=\EP,
ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
sgr0=\EX, smacs=\EF, smso=\ET,
env230|envision230|envision 230 graphics terminal,
xenl@,
mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, use=vt100,
# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
# coupler attached, the whole rig fitting in a suitcase and more or less
# portable. Hot stuff for c.1977 :-) -- esr
ep48|ep4080|execuport 4080,
am, os,
cols#80,
bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
ep40|ep4000|execuport 4000,
cols#136, use=ep4080,
# Adam Thompson <thompson@xanth.magic.mb.ca> tells us:
# Informer series - these are all portable units, resembling older
# automatic bread-baking machines. The terminal looks like a `clamshell'
# design, but isn't. The structure is similar to the Direct terminals,
# but only half the width. The entire unit is only about 10" wide.
# It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
# keyboard. All the keys are crammed together, much like some laptop
# PCs today, but perhaps less well organized...all these units have a
# bewildering array of plugs on the back, including a built-in modem.
# The 305 was a color version of the 304; the 306 and 307 were mono and
# color terminals built for IBM bisync protocols.
# From: Paul Leondis <unllab@amber.berkeley.edu>
ifmr|Informer D304,
am,
cols#80, lines#24,
clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
smso=\EJ,
# Entry largely based on wy60 and has the features of wy60ak.
opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
am, bw, hs, km, mir, msgr, ul, xon,
cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
ip=$<3>,
is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
pfloc=\EZ2%p1%'?'%+%c%p2%s\177,
pfx=\EZ1%p1%'?'%+%c%p2%s\177,
pln=\Ez%p1%'/'%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
rs3=\EwG\Ee($<150>,
sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%'0'%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
uc=\EG8%p1%c\EG0,
use=adm+sgr,
teletec|Teletec Datascreen,
am,
cols#80, lines#24,
bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
home=^^, ind=^J,
# From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
# This termcap is for the LANPAR Technologies VISION 3220
# terminal. The function key definitions k0-k5 represent the
# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to
# PF4 keys.
# (v3220: removed obsolete ":kn#10:",
# I added <rmam>/<smam> based on the init string -- esr)
v3220|LANPAR Vision II model 3220/3221/3222,
am, mir, xenl,
cols#80, it#8, lines#24,
clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
# From: iang@cs.berkeley.edu
pilot|tgtelnet,
am, xenl,
cols#39, lines#16,
bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em , ht=^I,
ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K,
nel=\Em~ , rmso=\EB, smso=\Eb,
######## ICH/ICH1 VERSUS RMIR/SMIR
#
# Some non-curses applications get confused if both ich/ich1 and rmir/smir
# are present; the symptom is doubled characters in an update using insert.
# These applications are technically correct; in both 4.3BSD termcap and
# terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
# unless the terminal needs both. This requirement is now rare; most ich
# sequences do not require previous smir, and most smir insert modes do not
# require ich1 before each character.
#
# For ncurses-based applications this is not a problem, as ncurses uses
# one or the other as appropriate but never mixes the two. Therefore we
# have not corrected entries like `linux' and `xterm' that specify both.
# If you see doubled characters from these, use the linux-nic and xterm-nic
# entries that suppress ich/ich1. And upgrade to ncurses!
#
######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
#
# ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
# ECMA-48 standards are said to be almost identical, but are not the same
# as X3.64 (though for practical purposes they are close supersets of it).
#
# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
# Coded Character Sets"), include your snail-mail address, and you should
# receive the document in due course. Don't expect an email acknowledgement.
#
# Related standards include "X3.4-1977: American National Standard Code for
# Information Interchange" (the ASCII standard) and "X3.41.1974:
# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
# American National Standard for Information Interchange." I believe (but
# am not certain) that these are effectively identical to ECMA-6 and ECMA-35
# respectively.
#
#### VT100/ANSI/ECMA-48
#
# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
# and ECMA-48 Control Functions for Coded Character Sets.
#
# Much of the content of this comment is adapted from a table prepared by
# Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
# discussion of some terminfo-related issues, and updates to capture ECMA-48
# have been added. Control functions described in ECMA-48 only are tagged
# with * after their names.
#
# The table is a complete list of the defined ANSI X3.64/ECMA-48 control
# sequences. In the main table, \E stands for an escape (\033) character,
# SPC for space. Pn stands for a single numeric parameter to be inserted
# in decimal ASCII. Ps stands for a list of such parameters separated by
# semicolons. Parameter meanings for most parametrized sequences are
# decribed in the notes.
#
# Sequence Sequence Parameter or
# Mnemonic Name Sequence Value Mode terminfo
# -----------------------------------------------------------------------------
# APC Applicatn Program Command \E _ - Delim -
# BEL Bell * ^G - - bel
# BPH Break Permitted Here * \E B - * -
# BS Backpace * ^H - EF -
# CAN Cancel * ^X - - - (A)
# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
# CCH Cancel Previous Character \E T - - -
# CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
# CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
# CMD Coding Method Delimiter * \E
# CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
# CPL Cursor Preceding Line \E [ Pn F 1 eF -
# CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
# CSI Control Sequence Intro \E [ - Intro -
# CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
# CUB Cursor Backward \E [ Pn D 1 eF cub
# CUD Cursor Down \E [ Pn B 1 eF cud
# CUF Cursor Forward \E [ Pn C 1 eF cuf
# CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
# CUU Cursor Up \E [ Pn A 1 eF cuu
# CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
# DA Device Attributes \E [ Pn c 0 - -
# DAQ Define Area Qualification \E [ Ps o 0 - -
# DCH Delete Character \E [ Pn P 1 eF dch
# DCS Device Control String \E P - Delim -
# DL Delete Line \E [ Pn M 1 eF dl
# DLE Data Link Escape * ^P - - -
# DMI Disable Manual Input \E \ - Fs -
# DSR Device Status Report \E [ Ps n 0 - - (I)
# DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
# EA Erase in Area \E [ Ps O 0 eF - (J)
# ECH Erase Character \E [ Pn X 1 eF ech
# ED Erase in Display \E [ Ps J 0 eF ed (J)
# EF Erase in Field \E [ Ps N 0 eF -
# EL Erase in Line \E [ Ps K 0 eF el (J)
# EM End of Medium * ^Y - - -
# EMI Enable Manual Input \E b Fs -
# ENQ Enquire ^E - - -
# EOT End Of Transmission ^D - * -
# EPA End of Protected Area \E W - - - (K)
# ESA End of Selected Area \E G - - -
# ESC Escape ^[ - - -
# ETB End Transmission Block ^W - - -
# ETX End of Text ^C - - -
# FF Form Feed ^L - - -
# FNK Function Key * \E [ Pn SPC W - - -
# GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
# FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
# GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
# GSS Graphic Size Selection \E [ Pn SPC C none FE -
# HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
# HPB Char Position Backward \E [ j 1 FE -
# HPR Horz Position Relative \E [ Pn a 1 FE - (M)
# HT Horizontal Tab * ^I - FE - (N)
# HTJ Horz Tab w/Justification \E I - FE -
# HTS Horizontal Tab Set \E H - FE hts
# HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
# ICH Insert Character \E [ Pn @ 1 eF ich
# IDCS ID Device Control String \E [ SPC O - * -
# IGS ID Graphic Subrepertoire \E [ SPC M - * -
# IL Insert Line \E [ Pn L 1 eF il
# IND Index \E D - FE -
# INT Interrupt \E a - Fs -
# JFY Justify \E [ Ps SPC F 0 FE -
# IS1 Info Separator #1 * ^_ - * -
# IS2 Info Separator #1 * ^^ - * -
# IS3 Info Separator #1 * ^] - * -
# IS4 Info Separator #1 * ^\ - * -
# LF Line Feed ^J - - -
# LS1R Locking Shift Right 1 * \E ~ - - -
# LS2 Locking Shift 2 * \E n - - -
# LS2R Locking Shift Right 2 * \E } - - -
# LS3 Locking Shift 3 * \E o - - -
# LS3R Locking Shift Right 3 * \E | - - -
# MC Media Copy \E [ Ps i 0 - - (S)
# MW Message Waiting \E U - - -
# NAK Negative Acknowledge * ^U - * -
# NBH No Break Here * \E C - - -
# NEL Next Line \E E - FE nel (D)
# NP Next Page \E [ Pn U 1 eF -
# NUL Null * ^@ - - -
# OSC Operating System Command \E ] - Delim -
# PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
# PFS Page Format Selection * \E Pn SPC J 0 - -
# PLD Partial Line Down \E K - FE - (T)
# PLU Partial Line Up \E L - FE - (U)
# PM Privacy Message \E ^ - Delim -
# PP Preceding Page \E [ Pn V 1 eF -
# PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
# PPB Page Position Backward * \E [ Pn SPC R 1 FE -
# PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
# PTX Parallel Texts * \E [ \ - - -
# PU1 Private Use 1 \E Q - - -
# PU2 Private Use 2 \E R - - -
# QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
# REP Repeat Char or Control \E [ Pn b 1 - rep
# RI Reverse Index \E M - FE - (V)
# RIS Reset to Initial State \E c - Fs -
# RM Reset Mode * \E [ Ps l - - - (W)
# SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
# SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
# SCI Single-Char Introducer \E Z - - -
# SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
# SCS Set Char. Spacing * \E [ Pn SPC g - - -
# SD Scroll Down \E [ Pn T 1 eF rin
# SDS Start Directed String * \E [ Pn ] 1 - -
# SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
# SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
# SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
# SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
# SI Shift In ^O - - - (P)
# SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
# SL Scroll Left \E [ Pn SPC @ 1 eF -
# SLH Set Line Home * \E [ Pn SPC U - - -
# SLL Set Line Limit * \E [ Pn SPC V - - -
# SLS Set Line Spacing * \E [ Pn SPC h - - -
# SM Select Mode \E [ Ps h none - - (W)
# SO Shift Out ^N - - - (Q)
# SOH Start Of Heading * ^A - - -
# SOS Start of String * \E X - - -
# SPA Start of Protected Area \E V - - - (Z)
# SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
# SPH Set Page Home * \E [ Ps SPC G - - -
# SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
# SPL Set Page Limit * \E [ Ps SPC j - - -
# SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
# SR Scroll Right \E [ Pn SPC A 1 eF -
# SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
# SRS Start Reversed String * \E [ Ps [ 0 - -
# SSA Start of Selected Area \E F - - -
# SSU Select Size Unit * \E [ Pn SPC I 0 - -
# SSW Set Space Width * \E [ Pn SPC [ none - -
# SS2 Single Shift 2 (G2 set) \E N - Intro -
# SS3 Single Shift 3 (G3 set) \E O - Intro -
# ST String Terminator \E \ - Delim -
# STAB Selective Tabulation * \E [ Pn SPC ^ - - -
# STS Set Transmit State \E S - - -
# STX Start pf Text * ^B - - -
# SU Scroll Up \E [ Pn S 1 eF indn
# SUB Substitute * ^Z - - -
# SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
# SYN Synchronous Idle * ^F - - -
# TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
# TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
# TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
# TBC Tab Clear \E [ Ps g 0 FE tbc
# TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
# TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
# TSS Thin Space Specification \E [ Pn SC E none FE -
# VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
# VPB Line Position Backward * \E [ Pn k 1 FE -
# VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
# VT Vertical Tabulation * ^K - FE -
# VTS Vertical Tabulation Set \E J - FE -
#
# ---------------------------------------------------------------------------
#
# Notes:
#
# Some control characters are listed in the ECMA-48 standard without
# being assigned functions relevant to terminal control there (they
# referred to other standards such as ISO 1745 or ECMA-35). They are listed
# here anyway for completeness.
#
# (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
#
# (B) There seems to be some confusion abroad between CHA and HPA. Most
# `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
# the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
# preserved the CHA abbreviation.
#
# (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
# Occasionally (as on, for example, certain HP terminals) this has the HTJ
# value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
# CHT abbreviation.
#
# (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
#
# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
# abbreviation.
#
# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
# 5 = clear all char tabs, 6 = clear all line tabs.
#
# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
# Position Absolute" but retains the HVP abbreviation.
#
# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
# abbreviation.
#
# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
# DSR, 6 = request CPR response.
#
# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
# 1 = clear from beginning, 2 = clear.
#
# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
#
# (L) The GSM parameters are vertical and horizontal parameters to scale by.
#
# (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
# use CUF for this function and ignore HPR. ECMA-48 calls this "Character
# Position Relative" but retains the HPR abbreviation.
#
# (N) ECMA-48 calls this "Character Tabulation" but retains the HT
# abbreviation.
#
# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
# 61-65 = variable highlights for ideograms.
#
# (P) SI is also called LSO, Locking Shift Zero.
#
# (Q) SI is also called LS1, Locking Shift One.
#
# (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
# use CUD for this function and ignore VPR. ECMA calls it `Line Position
# Absolute' but retains the VPA abbreviation.
#
# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
# from secondary aux device, 4 = stop relay to primary aux device, 5 =
# start relay to primary aux device, 6 = stop relay to secondary aux device,
# 7 = start relay to secondary aux device.
#
# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
# abbreviation.
#
# (U) ECMA-48 calls this "Partial Line Backward" but retains the PLD
# abbreviation.
#
# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
#
# (W) RM/SM modes are as follows: 1 = Guarder Area Transfer Mode (GATM),
# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
# from ECMA-48's 5th edition but are listed here for reference.
#
# (X) Select Alternate Presentation Variants is used only for non-Latin
# alphabets.
#
# (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
#
# (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
# abbreviation.
#
# ---------------------------------------------------------------------------
#
# Abbreviations:
#
# Intro an Introducer of some kind of defined sequence; the normal 7-bit
# X3.64 Control Sequence Introducer is the two characters "Escape ["
#
# Delim a Delimiter
#
# x/y identifies a character by position in the ASCII table (column/row)
#
# eF editor function (see explanation)
#
# FE format effector (see explanation)
#
# F is a Final character in
# an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
# a control sequence (F from 4/0 to 7/14)
#
# Gs is a graphic character appearing in strings (Gs ranges from
# 2/0 to 7/14) in the ASCII table
#
# Ce is a control represented as a single bit combination in the C1 set
# of controls in an 8-bit character set
#
# C0 the familiar set of 7-bit ASCII control characters
#
# C1 roughly, the set of control chars available only in 8-bit systems.
# This is too complicated to explain fully here, so read Jim Fleming's
# article in the February 1983 BYTE, especially pages 214 through 224.
#
# Fe is a Final character of a 2-character Escape sequence that has an
# equivalent representation in an 8-bit environment as a Ce-type
# (Fe ranges from 4/0 to 5/15)
#
# Fs is a Final character of a 2-character Escape sequence that is
# standardized internationally with identical representation in 7-bit
# and 8-bit environments and is independent of the currently
# designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
#
# I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
# ASCII table
#
# P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
# table
#
# Pn is a numeric parameter in a control sequence, a string of zero or
# more characters ranging from 3/0 to 3/9 in the ASCII table
#
# Ps is a variable number of selective parameters in a control sequence
# with each selective parameter separated from the other by the code
# 3/11 (which usually represents a semicolon); Ps ranges from
# 3/0 to 3/9 and includes 3/11
#
# * Not relevant to terminal control, listed for completeness only.
#
# Format Effectors versus Editor Functions
#
# A format effector specifies how following output is to be displayed.
# An editor function allows you to modify the display. Informally
# format effectors may be destructive; format effectors should not be.
#
# For instance, a format effector that moves the "active position" (the
# cursor or equivalent) one space to the left would be useful when you want to
# create an overstrike, a compound character made of two standard characters
# overlaid. Control-H, the Backspace character, is actually supposed to be a
# format effector, so you can do this. But many systems use it in a
# nonstandard fashion, as an editor function, deleting the character to the
# left of the cursor and moving the cursor left. When Control-H is assumed to
# be an editor function, you cannot predict whether its use will create an
# overstrike unless you also know whether the output device is in an "insert
# mode" or an "overwrite mode". When Control-H is used as a format effector,
# its effect can always be predicted. The familiar characters carriage
# return, linefeed, formfeed, etc., are defined as format effectors.
#
# NOTES ON THE DEC VT100 IMPLEMENTATION
#
# Control sequences implemented in the VT100 are as follows:
#
# CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
# LNM, NEL, RI, RIS, RM, SGR, SM, TBC
#
# plus several private DEC commands.
#
# Erasing parts of the display (EL and ED) in the VT100 is performed thus:
#
# Erase from cursor to end of line Esc [ 0 K or Esc [ K
# Erase from beginning of line to cursor Esc [ 1 K
# Erase line containing cursor Esc [ 2 K
# Erase from cursor to end of screen Esc [ 0 J or Esc [ J
# Erase from beginning of screen to cursor Esc [ 1 J
# Erase entire screen Esc [ 2 J
#
# Some brain-damaged terminal/emulators respond to Esc [ J as if it were
# Esc [ 2 J, but this is wrong; the default is 0.
#
# The VT100 responds to receiving the DA (Device Attributes) control
#
# Esc [ c (or Esc [ 0 c)
#
# by transmitting the sequence
#
# Esc [ ? l ; Ps c
#
# where Ps is a character that describes installed options.
#
# The VT100's cursor location can be read with the DSR (Device Status
# Report) control
#
# Esc [ 6 n
#
# The VT100 reports by transmitting the CPR sequence
#
# Esc [ Pl ; Pc R
#
# where Pl is the line number and Pc is the column number (in decimal).
#
# The specification for the DEC VT100 is document EK-VT100-UG-003.
#### ANSI.SYS
#
# Here is a description of the color and attribute controls supported in the
# the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
# terminal emulators for Intel boxes obey these. They are a proper subset
# of the ECMA-48 escapes.
#
# 0 all attributes off
# 1 foreground bright
# 4 underscore on
# 5 blink on/background bright (not reliable with brown)
# 7 reverse-video
# 8 set blank (non-display)
# 10 set primary font
# 11 set first alternate font (on PCs, display ROM characters 1-31)
# 12 set second alternate font (on PCs, display IBM high-half chars)
#
# Color attribute sets
# 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
# 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
# Bright black becomes gray. Bright brown becomes yellow,
# These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
#
# * If the 5 attribute is on and you set a background color (40-47) it is
# supposed to enable bright background.
#
# * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
# when you try to set a "bright brown" (yellow) background with attribute
# 5 (you get a blinking yellow foreground instead). A few displays
# (including the System V console) support an attribute 6 that undoes this
# braindamage (this is required by iBCS2).
#
# * Some older versions of ANSI.SYS have a bug that causes thems to require
# ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
# compatible.)
#### Intel Binary Compatibility Standard
#
# For comparison, here are the capabilities implied by the Intel Binary
# Compatibility Standard for UNIX systems (Intel order number 468366-001).
# These recommendations are optional. IBCS2 allows the leading escape to
# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
# the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
# (as described in figure 9-3 of the standard). Those expressed in the ibcs2
# terminfo entry are followed with the corresponding capability in parens:
#
# CSI <n>k disable (n=0) or enable (n=1) keyclick
# CSI 2h lock keyboard
# CSI 2i send screen as input
# CSI 2l unlock keyboard
# CSI 6m enable background color intensity
# CSI <0-2>c reserved
# CSI <0-59>m select graphic rendition
# CSI <n>;<m>H (cup) cursor to line n and column m
# CSI <n>;<m>f cursor to line n and column m
# CSI <n>@ (ich) insert characters
# CSI <n>A (cuu) cursor up n lines
# CSI <n>B (cud) cursor down n lines
# CSI <n>C (cuu) cursor right n characters
# CSI <n>D (cud) cursor left n characters
# CSI <n>E cursor down n lines and in first column
# CSI <n>F cursor up n lines and in first column
# CSI <n>G (hpa) position cursor at column n-1
# CSI <n>J (ed) erase in display
# CSI <n>K (el) erase in line
# CSI <n>L (il) insert line(s)
# CSI <n>P (dch) delete characters
# CSI <n>S (indn) scroll up n lines
# CSI <n>T (rin) scroll down n lines
# CSI <n>X (ech) erase characters
# CSI <n>Z (cbt) back up n tab stops
# CSI <n>` cursor to column n on line
# CSI <n>a (cuu) cursor right n characters
# CSI <n>d (vpa) cursor to line n
# CSI <n>e cursor down n lines and in first column
# CSI <n>g (cbt) clear all tabs
# CSI <n>z make virtual terminal n active
# CSI ?7h (smam) turn automargin on
# CSI ?7l (rmam) turn automargin off
# CSI s save cursor position
# CSI u restore cursor position to saved value
# CSI =<c>A set overscan color
# CSI =<c>F set normal foreground color
# CSI =<c>G set normal background color
# CSI =<c>H set reverse foreground color
# CSI =<c>I set reverse foreground color
# CSI =<c>J set graphic foreground color
# CSI =<c>K set graphic foreground color
# CSI =<n>g (dispc) display n from alternate graphics character set
# CSI =<p>;<d>B set bell parameters
# CSI =<s>;<e>C set cursor parameters
# CSI =<x>D enable/disable intensity of background color
# CSI =<x>E set/clear blink vs. bold background
# CSI 7 (sc) (sc) save cursor position
# CSI 8 (rc) (rc) restore cursor position to saved value
# CSI H (hts) (hts) set tab stop
# CSI Q<n><string> define function key string
# (string must begin and end with delimiter char)
# CSI c (clear) clear screen
#
# The lack of any specification for attributes in SGR (among other things)
# makes this a wretchedly weak standard. The table above is literally
# everything iBSC2 has to say about terminal escape sequences; there is
# no further discussion of their meaning or how to set the parameters
# in these sequences at all.
#
######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
#
# The historical termcap file entries were written primarily in 4.4BSD termcap.
# The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
# with the extension names chosen for compatibility with the termcap names
# assigned in System V terminfo. There are some variant extension sets out
# there. We try to describe them here.
#
# XENIX extensions:
#
# The XENIX extensions include a set of function-key capabilities as follows:
#
# code XENIX variable name terminfo name name clashes?
# ---- ------------------- ------------- -----------------------
# CL key_char_left
# CR key_char_right
# CW key_change_window create_window
# EN key_end kend
# HM key_home khome
# HP ??
# LD key_delete_line kdl1
# LF key_linefeed label_off
# NU key_next_unlocked_cell
# PD key_page_down knp
# PL ??
# PN start_print mc5
# PR ??
# PS stop_print mc4
# PU key_page_up kpp pulse
# RC key_recalc remove_clock
# RF key_toggle_ref req_for_input
# RT key_return kent
# UP key_up_arrow kcuu1 parm_up_cursor
# WL key_word_left
# WR key_word_right
#
# The XENIX extensions also include the following character-set and highlight
# capabilities:
#
# XENIX terminfo function
# ----- -------- ------------------------------
# GS smacs start alternate character set
# GE rmacs end alternate character set
# GG :as:/:ae: glitch (analogous to :sg:/:ug:)
# bo blink begin blink (not used in /etc/termcap)
# be end blink (not used in /etc/termcap)
# bb blink glitch (not used in /etc/termcap)
# it dim begin dim (not used in /etc/termcap)
# ie end dim (not used in /etc/termcap)
# ig dim glitch (not used in /etc/termcap)
#
# Finally, XENIX also used the following forms-drawing capabilities:
#
# single double type ASCII approximation
# ------ ------ ------------- -------------------
# GV Gv vertical line |
# GH Gv horizontal line - _
# G1 G5 top right corner _ |
# G2 G6 top left corner |
# G3 G7 bottom left corner |_
# G4 G8 bottom right corner _|
# GD Gd down-tick character T
# GL Gl left-tick character -|
# GR Gr right-tick character |-
# GC Gc middle intersection -|-
# GU Gu up-tick character _|_
#
# These were invented to take advantage of the IBM PC ROM character set. One
# can compose an acsc string from the single-width characters as follows
# "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
# When translating a termcap file, ncurses tic will do this automatically.
# The double forms characters don't fit the SVr4 terminfo model.
#
# AT&T Extensions:
#
# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
# nonstandard capabilities. Its signature is the KM capability, used to name
# some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
# set. Comments in the original, and a little cross-checking with other AT&T
# documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
# (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
# cursor invisible), and CV=:ve: (make cursor normal).
#
# HP Extensions
#
# The HP library (as of mid-1995, their term.h file version 70.1) appears to
# have the System V capabilities up to SVr1 level. After that, it supports
# two nonstandard caps meml and memu corresponding to the old termcap :ml:,
# :mu: capabilities. After that, it supports caps plab_norm, label_on,
# label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
# HP binary format incompatible with SVr4's.
#
# IBM Extensions
#
# There is a set of nonstandard terminfos used by IBM's AIX operating system.
# The AIX terminfo library diverged from SVr1 terminfo, and replaces all
# capabilities following prtr_non with the following special capabilties:
# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
# rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
# kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
# renamed (to kcbt and kslt). The places in the box[12] capabilities
# correspond to acsc chars, here is the mapping:
#
# box1[0] = ACS_ULCORNER
# box1[1] = ACS_HLINE
# box1[2] = ACS_URCORNER
# box1[3] = ACS_VLINE
# box1[4] = ACS_LRCORNER
# box1[5] = ACS_LLCORNER
# box1[6] = ACS_TTEE
# box1[7] = ACS_RTEE
# box1[8] = ACS_BTEE
# box1[9] = ACS_LTEE
# box1[10] = ACS_PLUS
#
# The box2 characters are the double-line versions of these forms graphics.
# The AIX binary terminfo format is incompatible with SVr4's.
#
# Iris console extensions:
#
# HS is half-intensity start; HE is half-intensity end
# CT is color terminal type (for Curses & rogue)
# CP is color change escape sequence
# CZ are color names (for Curses & rogue)
#
# The ncurses tic utility recognizes HS as an alias for mh <dim>.
#
# TC Extensions:
#
# There is a set of extended termcaps associated with something
# called the "Terminal Control" or TC package created by MainStream Systems,
# Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
# CF for civis and CO for cvvis. Finally, they define a boolean :ct:
# that flags color terminals.
#
######## CHANGE HISTORY
#
# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
# Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
# project.
#
# This file contains all the capability information present in John Kunze's
# last version of the termcap master file, except as noted in the change
# comments at end of file. Some information about very ancient obsolete
# capabilities has been moved to comments. Some all-numeric names of older
# terminals have been retired.
#
# I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
# capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
# used by BSD curses.
#
# The 9.1.0 version of this file was translated from my lightly-edited copy of
# 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
# the purpose. Unless the ncurses tic implementation and the Lisp code were
# making perfectly synchronized mistakes which I then failed to catch by
# eyeball, the translation was correct and perfectly information-preserving.
#
# Major version number bumps correspond to major version changes in ncurses.
#
# Here is a log of the changes since then:
#
# 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
# * First terminfo master translated from 8.3.
# 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
# * Replaced Wyse entries with updated entries supplied by vendor.
#
# 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
# * Added contact & status info from G. Clark Brown <clark@sssi.com>.
# 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
# * Better XENIX keycap translation. Describe TC termcaps.
# * Contact and history info supplied by Qume.
# 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
# * Raided the Shuford FTP site for recent termcaps/terminfos.
# * Added information on X3.64 and VT100 standard escape sequences.
# 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
# * Added a correct X11R6 xterm entry.
# * Fixed terminfo translations of padding.
# 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
# * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
# * Added u6/u7/u8/u9 capabilities.
# * Added PCVT entry.
# 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
# * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
# to use reverse-video standout so Emacs will look right.
# * Added el1 capability to ansi.
# * Added smacs/rmacs to ansi.sys.
#
# 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
# * New mt70 entry.
# * Added COPYRIGHTS AND OTHER DELUSIONS.
# * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
# smartvid & smarterm, ampex 175 & 219 & 232,
# env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
# ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
# screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
# adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
# * Replaced the Perkin-Elmer entries with vendor's official ones.
# * Restored the old minimal-ansi entry, luna needs it.
# * Fixed some incorrect ip and proportional-padding translations.
# 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
# * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
# * Make the xterm entry 65 lines again; create xterm25 and xterm24
# to force a particular height.
# * Added beehive4 and reorganized other Harris entries.
# 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
# * Merged in DEC's official entries for its terminals. The only old
# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
# * Replaced the translated BBN Bitgraph entries with purpose-built
# ones from AT&T's SVr3.
# * Replaced the AT&T entries with AT&T's official terminfos.
# * Added teleray 16, vc415, cops10.
# * Merged in many individual capabilities from SCO terminfo files.
# 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
# * Typo fixes.
# * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
# 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
# * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
# pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
# simterm, citoh and variants.
# * Replaced sol entry with sol1 and sol2.
# * Replaced Qume QVT and Freedom-series entries with purpose-built
# terminfo entries.
# * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
# and dg200 entries using caps from from SCO.
# * Added the usual set of function-key mappings to ANSI entry.
# * Corrected xterm's function-key capabilities.
# 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
# * Fix in xterm entry, cub and cud are not reliable under X11R6.
# 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
# * Fix in xterm entry, get the arrow keys right.
# * Change some \0 escapes to \200.
# 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
# * Added apple (Videx card), adm1a, oadm31.
# * Fixed malformed ampex csr.
# * Fixed act4, cyb110; they had old-style prefix padding left in.
# * Changed mandatory to advisory padding in many entries.
# * Replaced HP entries up to hpsub with purpose-built ones.
# * Blank rmir/smir/rmdc/smdc capabilities removed.
# * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
# 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
# * Replaced the Ann Arbor entries with SCO's, the init strings are
# more efficient (but the entries otherwise identical).
# * Added dg211 from Shuford archive.
# * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
# adm42-nl, pc52, gs6300, xerox820, uts30.
# * Pull SCO's padding into vi200 entry.
# * Improved capabilities for tvi4107 and other Televideo and Viewpoint
# entries merged in from SCO's descriptions.
# * Fixed old-style prefix padding on zen50, h1500.
# * Moved old superbee entry to superbee-xsb, pulled in new superbee
# entry from SCO's description.
# * Reorganized the special entries.
# * Added lm#0 to cbunix and virtual entries.
#
# 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
# * Restored cdc456tst.
# * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
# * Added megatek, beacon, microkit.
# * Freeze for ncurses-1.9 release.
# 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
# * Added historical data for TAB.
# * Comment fixes from David MacKenzie.
# * Added the new BSDI pc3 entry.
# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
# * A change in the tic -C logic now ensures that all entries in
# the termcap translation will fit in < 1024 bytes.
# * Added `bobcat' and `gator' HP consoles and the Nu machine entries
# from GNU termcap file. This merges in all their local information.
# 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
# * Changed tic -C logic to dump all capabilities used by GNU termcap.
# * Added warnings about entries with long translations (restoring
# all the GNU termcaps pushes a few over the edge).
# 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
# * Yet another tic change, and a couple of entry tweaks, to reduce the
# number of long (> 1024) termcap translations back to 0.
#
# 9.6.0 (Mon May 1 10:35:54 EDT 1995)
# * Added kf13-kf20 to Linux entry.
# * Regularize Prime terminal names.
# * Historical data on Synertek.
# * Freeze for ncurses-1.9.1.
# 9.6.1 (Sat May 6 02:00:52 EDT 1995):
# * Added true xterm-color entry, renamed djm's pseudo-color entry.
# * Eliminate whitespace in short name fields, this tanks some scripts.
# * Name field changes to shorten some long entries.
# * Termcap translation now automatically generates empty rmir/smir
# when ich1/ich is present (copes with an ancient vi bug).
# * Added `screen' entries from FSF's screen-3.6.2.
# * Added linux-nic and xterm-nic entries.
# 9.6.2 (Sat May 6 17:00:55 EDT 1995):
# * Change linux entry to use smacs=\E[11m and have an explicit acsc,
# eliminating some special-case code in ncurses.
#
# 9.7.0 (Tue May 9 18:03:12 EDT 1995):
# * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
# that captures everything unique from it.
# * Added reorder script generator.
# * Freeze for ncurses 1.9.2 release.
# 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
# * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
# * Added Olaf Siebert's corrections for adm12.
# * ansi-pc-color now includes the colors and pairs caps, so that
# entries which use it will inherit them automatically.
# * The linux entry can now recognize the center (keypad 5) key.
# * Removed some junk that found its way into Linux acsc.
#
# 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
# * Add 50% cut mark as a desperate hack to reduce tic's core usage.
# * xterm doesn't try to use application keypad mode any more.
# * Freeze for ncurses-1.9.3 release.
# 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
# * Added corrected sun entry from vendor.
# * Added csr capability to linux entry.
# * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
# * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
# * Some commented-out caps in long entries come back in, my code
# for computing string-table lengths had a bug in it.
# * pcansi series modified to fit comm-program reality better.
# 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
# * BSD/OS actually ships the ibmpc3 bold entry as its console.
# * Correct some bad aliases in the pcansi series
# * Added entry for QNX console.
# * Clean up duplicate long names for use with 4.4 library.
# * Change vt100 standout to be normal reverse vide, not bright reverse;
# this makes the Emacs status line look better.
# 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
# * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
# * Minor surgery, mostly on name strings, to shorten termcap version.
#
# 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
# * Added dec-vt100 for use with the EWAN emulator.
# * Added kmous to xterm for use with xterm's mouse-tracking facility.
# * Freeze for 1.9.5 alpha release.
# 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
# * Changed xterm lines to 24, the X11R6 default.
# 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
# * Added 7 newly discovered, undocumented acsc characters to linux
# entry (the pryz{|} characters).
# * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
# * Correct two typos in the xterm entries introduced in 9.9.1.
# * I finally figured out how to translate ko capabilities. Done.
# * Added tvi921 entries from Tim Theisen.
# * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
# * Removed mystery tec entry, it was neither interesting nor useful.
# * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
# vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
# trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
# by making them relative to use capabilities
# * Added cuf1=^L to tvi925 from deleted variant tvi925a.
# * fixed cup in adm22 entry and parametrized strings in vt320-k3.
# * added it#8 to entries that used to have :pt: -- tvi912, vi200,
# ampex80,
# * Translate all home=\E[;H capabilities to home=\E[H, they're
# equivalent.
# * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
# vt100 and ANSI-like terminals.
# 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
# * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
# does this now, too.
# * fviewpoint is gone, it duplicated screwpoint.
# * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
# ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
# versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
# The UW vi50 replaces the old one, which becomes vi50adm,
# * No more embedded commas in name fields.
#
# 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
# * XENIX forms characters in fos, trs16, scoansi become acsc strings,
# * Introduced klone+* entries for describing Intel-console behavior.
# * Linux kbs is default-mapped to delete for some brain-dead reason.
# * -nsl -> -ns. The -pp syntax is obsolete.
# * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
# * Make xterm entry do application-keypad mode again. I got complaints
# that it was messing up someone's 3270 emulator.
# * Added some longname fields in order to avoid warning messages from
# older tic implementations.
# * According to ctrlseqs.ms, xterm has a full vt100 graphics set. Use
# it! (This gives us pi, greater than, less than, and a few more.)
# * Freeze for ncurses-1.9.6 release.
# 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
# * Add xon to a number of console entries, they're memory-mapped and
# don't need padding.
# * Correct the use dependencies in the ansi series.
# * Hand-translate more XENIX capabilities.
# * Added hpterm entry for HP's X terminal emulator.
# * Added aixterm entries.
# * Shortened four names so everything fits in 14 chars.
#
# 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
# * Added ibcs2 entry and info on iBCS2 standard.
# * Corrected hpa/vpa in linux entry. They still fail the worm test.
# * We can handle the HP meml/memu capability now.
# * Added smacs to klone entries, just as documentation.
# * Carrected ansi.sys and cit-500 entries.
# * Added z39, vt320-k311, v220c, and avatar entries.
# * Make pcansi use the ansi.sys invis capability.
# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
# tvi925, tvi950, dt80, ncr7900i, h19.
# * X3.64 has been withdrawn, change some references.
# * Removed function keys from ansi-m entry.
# * Corrected ansi.sys entry.
# * Freeze for ncurses-1.9.7 release.
# 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
# * Added rmam/smam capabilities to many entries based on init strings.
# * Added correct hpa/vpa to linux.
# * Reduced several entries relative to vt52.
# 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
# * Exiled some utterly unidentifiable custom and homebrew types to the
# UFO file; also, obsolete small-screen hardware; also, entries which
# look flat-out incorrect, garbled, or redundant. These include the
# following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
# tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
# apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
# fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
# yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
# vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
# trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
# att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
# tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
# c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
# regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
# vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
# vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
# * Corrected pcvt25h as suggested by Brian C. Grayson
# <bgrayson@pine.ece.utexas.edu>.
# 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
# * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
# * Added kent=\EOM to xterm entry.
#
# 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
# * Corrected gigi entry.
# * Restored cuf/cud1 to xterm, their apparent bugginess was due to
# bad hpa/vpa capabilities.
# * Corrected flash strings to have a uniform delay of .2 sec. No
# more speed-dependent NUL-padding!
# * terminfo capabilities in comments bracketed with <>.
# 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
# * Replaced pcvt with the 3.31 pcvt entries.
# * Freeze for 1.9.7a.
# 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
# * Added emu entry from the X11R6 contrib tape sources.
#
# 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
# * Improved iris-ansi and sun entries.
# * More flash string improvements.
# * Corrected wy160 & wy160 as suggested by Robert Dunn
# * Added dim to at386.
# * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
# he's ready to start using the termcap generated from this one.
# * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
# ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
# * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
# att610, att620, att630,
# * Changed hazeltine name prefix from h to hz.
# * Sent t500 to the UFI file.
# * I think we've sucked all the juice out of BSDI's termcap file now.
# * Freeze for ncurses 1.9.8 release
# 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
# * Unfreeze, linux kbs needed to be fixed.
# * Tim Theisen pinned down a bug in the DMD firmware.
# 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
# * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
# (The broken ones had been shadowed by sgr.)
# 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
# * Added documentation on ECMA-48 standard.
# * New Amiga entry.
# 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
# * More ECMA-48 stuff
# * Corrected typo in minix entry, added pc-minix.
# * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
# * Added rxvt entry.
# * Added 1.3.x color-change capabilities to linux entry.
# 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
# * Corrected rxvt entry khome/kend.
# * Corrected linux color change capabilities.
# * NeXT entries from Dave Wetzel.
# * Cleaned up if and rf file names (all in /usr/share now).
# * Changed linux op capability to avoid screwing up a background color
# pair set by setterm.
# 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
# * Added xterm-sun.
# 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
# * Added visa50.
#
# 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
# * Another sweep through the Shuford archive looking for new info.
# * Added dg100 alias to dg6053 based on a comp.terminals posting.
# * Added st52 from Per Persson.
# * Added eterm from the GNU Emacs 19.30 distribution.
# * Freeze for 1.9.9.
# 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
# * FreeBSD console entries from Andrew Chernov.
# * Removed duplicate Atari st52 name.
# 9.13.2 (Tue May 7 16:10:06 EDT 1996)
# * xterm doesn't actually have ACS_BLOCK.
# * Change klone+color setf/setb to simpler forms that can be
# translated into termcap.
# * Added xterm1.
# * Removed mechanically-generated junk capabilities from cons* entries.
# * Added color support to bsdos.
# 9.13.3 (Thu May 9 10:35:51 EDT 1996):
# * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
# * Created ecma+color, linux can use it. Also added ech to linux.
# * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
# * Add descriptions to FreeBSD console entries. Also shorten
# some aliases to <= 14 chars for portability.
# * Added x68k console
# * Added OTbs to several VT-series entries.
# 9.13.4 (Wed May 22 10:54:09 EDT 1996):
# * screen entry update for 3.7.1 from Michael Alan Dorfman.
# 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
# * kterm correction due to Kenji Rikitake.
# * ACS correction in vt320-kll due to Phillippe De Muyter.
# 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
# * Sun console entry correction from J.T. Conklin.
# * Changed all DEC VT300 and up terminals to use VT300 tab set
# 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
# * Added smul to linux entry (we never noticed it was missing
# because of sgr!).
# * Added rmln to hp+labels (deduced from other HP entries).
# * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
# pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
# * Corrected vt220 acsc.
# * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
# this corresponds to reality and helps prevent some tic warnings.
# * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
# hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
# adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
# qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
# wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
# adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
# f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
# owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
# lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
# dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
# ifmr, v3220, wy100q, tandem653, ibmaed.
# * Added DWK terminal description.
# 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
# * Many entries now have highlights inherited from adm+sgr.
# * xterm entry now corresponds to XFree86 3.1.2E, with color.
# * xtitle and xtitle-twm enable access to the X status line.
# * Added linux-1.3.6 color palette caps in conventional format.
# * Added adm1178 terminal.
# * Move fos and apollo terminals to obsolete category.
# * Aha! The BRL terminals file told us what the Iris extensions mean.
# * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
# commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
# cit500, adm11.
# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
# * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
# aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
# * Corrected, from BRL termcap file: vi50.
# * Better rxvt entry & corrected xterm entries from Thomas Dickey.
# 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
# * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
# att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
# (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
# tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
# apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
# * Paired-attribute fixes to various terminals.
# * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
# * xterm entry corrections from Thomas Dickey.
# 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
# * Added t916 entry, translated from a termcap in SCO's support area.
# * New qnx entry from Michael Hunter.
# 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
# * Added hpex2 from Ville Sulko.
# * Fixed a bug that ran the qnx and pcvtXX together.
# 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
# * Added dtterm entry from Solaris CDE.
# 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
# * corrected pairs#8 typo in dtterm entry.
# * added tvi9065.
# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
# * updated xterm entry to cover 3.1.2E's new features.
# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
# * Added new minix entry
# * Removed aliases of the form ^[0-9]* for obsolete terminals.
# * Commented out linux-old, nobody's using pre-1.2 kernels now.
# 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
# * Added Prism entries and kt7ix.
# * Caution notes about EWAN and tabset files.
# * Changed /usr/lib/tabset -> /usr/share/tabset.
# * Added acsc/rmacs/smacs to vt52.
# 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
# * Merged in Thomas Dickey's reorganization of the xterm entries;
# added technical corrections to avoid warning messages.
# 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
# * Added rmso=\E[27m in Linux entry.
# * Added koi8-r support for Linux console.
# * Replace xterm entries with canonical ones from XFree86 3.2.
# 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
# * Added color_xterm from Jacob Mandelson
# 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
# * Back off the xterm entry to use r6 as a base.
# 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
# * Added dec-vt220 at Adrian Garside's request.
# 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
# * Replaced minitel-2 entry.
# * Added MGR, ansi-nt.
# * Minor corrections to xterm entries.
# * Replaced EWAN telnet entry.
# * Dropped the reorder script generator. It was a fossil.
# 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
# * Thorsten Lockert added termcap `bs' to a lot of types, working from
# the 4.4BSD Lite2 file.
#
# The following sets edit modes for GNU EMACS
# Local Variables:
# fill-prefix:"\t"
# fill-column:75
# End:
######## SHANTIH! SHANTIH! SHANTIH!
![[BACK]](/icons/back.gif){kind=icon}
Return to terminfo.src CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / src / share / terminfo