src/share/termtypes/termtypes.master - diff

Return to termtypes.master CVS log

Up to [local] / src / share / termtypes

Diff for /src/share/termtypes/termtypes.master between version 1.39 and 1.40

-version 1.39, 2010/04/05 17:35:20
+version 1.40, 2010/07/19 00:28:18
 Line 70
 Line 70
 Line 70
  # This file assumes a US-ASCII character set. If you need to fix this, start
  # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
  # for your character set.  \E(A and \E)A enables the British character set
  # with the pound sign at position 2/3.
  #
  # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
  # C1 characters are considered the first-byte set of the Japanese encodings,
 Line 96
 Line 96
 Line 96
  # string-table limit of archaic termcap libraries except where explicitly
  # noted below.  Note that the termcap translation assumes that your termcap
  # library can handle multiple tc capabilities in an entry. 4.4BSD has this
  # capability.  Older versions of GNU termcap, through 1.3, do not.
  #
  # For details on these formats, see terminfo(5) in the ncurses distribution,
  # and termcap(5) in the 4.4BSD Unix Programmer's Manual.  Be aware that 4.4BSD
 Line 128
 Line 128
 Line 128
  # the master format).  Individual capabilities are commented out by
  # placing a period between the colon and the capability name.
  #
  # The file is divided up into major sections (headed by lines beginning with
  # the string "########") and minor sections (beginning with "####"); do
  #
  #       grep "^####" <file> | more
 Line 138
 Line 138
 Line 138
  # that important and frequently-encountered terminal types are near the
  # front (so that you'll get reasonable search efficiency from a linear
  # search of the termcap form even if you don't use reorder).  Minor sections
  # usually correspond to manufacturers or standard terminal classes.
  # Parenthesized words following manufacturer names are type prefixes or
  # product line names used by that manufacturers.
  #
 Line 171
 Line 171
 Line 171
  #       -s      Enable status line.
  #       -vb     Use visible bell (<flash>) rather than <bel>.
  #       -w      Wide - in 132 column mode.
  # If a name has multiple suffixes and one is a line height, that one should
  # go first.  Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
  #
  # Entries with embedded plus signs are designed to be included through use/tc
  # capabilities, not used as standalone entries.
  #
  # To avoid search clashes, some older all-numeric names for terminals have
  # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
  # All primary names of terminals now have alphanumeric prefixes.
  #
  # Comments marked "esr" are mostly results of applying the termcap-compiler
  # code packaged with ncurses and contemplating the resulting error messages.
  # In many cases, these indicated obvious fixes to syntax garbled by the
  # composers.  In a few cases, I was able to deduce corrected forms for garbled
  # capabilities by looking at context.  All the information in the original
 Line 217
 Line 217
 Line 217
  #       %c      Accept any character
  #       %[...]  Accept any number of characters in the given set
  #
  # The cursor position report (<u6>) string must contain two scanf(3)-style
  # %d format elements.  The first of these must correspond to the Y coordinate
  # and the second to the %d.  If the string contains the sequence %i, it is
  # taken as an instruction to decrement each value after reading it (this is
 Line 232
 Line 232
 Line 232
  # All the entries in this file have been edited to assume that the tabset
  # files directory is /usr/share/tabset, in conformance with the File Hierarchy
  # Standard for Linux and open-source BSD systems.  Some vendors (notably Sun)
  # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
  #
  # No curses package we know of actually uses these files.  If their location
  # is an issue, you will have to hand-patch the file locations before compiling
  # this file.
  #
  # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
  #
  # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
 Line 259
 Line 259
 Line 259
  # I'm especially interested in identifying the obscure entries listed under
  # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
  # wisdom about them gets lost.  If you know a lot about obscure old terminals,
  # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
  # eyeball it for things you can identify and describe.
  #
  # If you have been around long enough to contribute, please read the file
  # with this in mind and send me your annotations.
 Line 271
 Line 271
 Line 271
  # California copyright with dates from 1980 to 1993.
  #
  # Some information has been merged in from a terminfo file SCO distributes.
  # It has an obnoxious boilerplate copyright which I'm ignoring because they
  # took so much of the content from the ancestral BSD versions of this file
  # and didn't attribute it, thereby violating the BSD Regents' copyright.
  #
 Line 281
 Line 281
 Line 281
  # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
  #
  # This file deliberately has no copyright.  It belongs to no one and everyone.
  # If you claim you own it, you will merely succeed in looking like a fool.
  # Use it as you like.  Use it at your own risk.  Copy and redistribute freely.
  # There are no guarantees anywhere.  Svaha!
  #
 Line 299
 Line 299
 Line 299
  # terminal are the lowest common denominator - they look about like a ti 700.
  #
  dumb|80-column dumb tty,
          am,
          cols#80,
          bel=^G, cr=^M, cud1=^J, ind=^J,
  unknown|unknown terminal type,
          gn, use=dumb,
  lpr|printer|line printer,
          OTbs, hc, os,
          cols#132, lines#66,
          bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
  glasstty|classic glass tty interpreting ASCII control characters,
          OTbs, am,
          cols#80,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
          kcud1=^J, nel=^M^J, .kbs=^H,
  vanilla|dumb tty,
          OTbs,
          bel=^G, cr=^M, cud1=^J, ind=^J,
  # This is almost the same as "dumb", but with no prespecified width.
  # DEL and ^C are hardcoded to act as kill characters.
 Line 336
 Line 336
 Line 336
  # ANSI capabilities are broken up into pieces, so that a terminal
  # implementing some ANSI subset can use many of them.
  ansi+local1,
          cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
  ansi+local,
          cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
          cuu=\E[%p1%dA, use=ansi+local1,
  ansi+tabs,
          cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g,
  ansi+inittabs,
          it#8, use=ansi+tabs,
  ansi+erase,
          clear=\E[H\E[J, ed=\E[J, el=\E[K,
  ansi+rca,
          hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
  ansi+cup,
          cup=\E[%i%p1%d;%p2%dH, home=\E[H,
  ansi+rep,
          rep=%p1%c\E[%p2%{1}%-%db,
  ansi+idl1,
          dl1=\E[M, il1=\E[L,
  ansi+idl,
          dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
  ansi+idc,
          dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
  ansi+arrows,
          kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          khome=\E[H,
  ansi+sgr|ansi graphic renditions,
          blink=\E[5m, invis=\E[8m, rev=\E[7m,
          sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
          sgr0=\E[0m,
  ansi+sgrso|ansi standout only,
          rmso=\E[m, smso=\E[7m,
  ansi+sgrul|ansi underline only,
          rmul=\E[m, smul=\E[4m,
  ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
          bold=\E[1m,
          sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
          use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
  ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
          dim=\E[2m,
          sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m,
          use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
  ansi+pp|ansi printer port,
          mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
  ansi+csr|ansi scroll-region plus cursor save & restore,
          csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
  # The IBM PC alternate character set.  Plug this into any Intel console entry.
  # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
 Line 389
 Line 389
 Line 389
  # This works with the System V, Linux, and BSDI consoles.  It's a safe bet this
  # will work with any Intel console, they all seem to have inherited \E[11m
  # from the ANSI.SYS de-facto standard.
  klone+acs|alternate character set for ansi.sys displays,
          acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
          rmacs=\E[10m, smacs=\E[11m,
  # Highlight controls corresponding to the ANSI.SYS standard.  Most
  # console drivers for Intel boxes obey these.  Makes the same assumption
  # about \E[11m as klone+acs.  True ANSI/ECMA-48 would have <rmso=\E[27m>,
  # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
  klone+sgr|attribute control for ansi.sys displays,
          blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m,
          rmso=\E[m, rmul=\E[m,
          sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m,
          sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
          use=klone+acs,
  # Most Intel boxes do not treat "invis" (invisible) text.
  klone+sgr8|attribute control for ansi.sys displays,
 Line 414
 Line 414
 Line 414
  # console drivers for Intel boxes obey these.  Does not assume \E[11m will
  # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
  # diamond and arrow characters under curses.
  klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
          blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
          rmul=\E[m,
          sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
          sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
          use=klone+acs,
  # KOI8-R (RFC1489) acs (alternate character set)
  # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
  klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
          acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
          rmacs=\E[10m, smacs=\E[11m,
  # ANSI.SYS color control.  The setab/setaf caps depend on the coincidence
  # between SVr4/XPG4's color numbers and ANSI.SYS attributes.  Here are longer
 Line 434
 Line 434
 Line 434
  # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
  # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
  # They match a subset of ECMA-48.
  klone+color|color control for ansi.sys and ISO6429-compatible displays,
          colors#8, ncv#3, pairs#64,
          op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
  # This is better than klone+color, it doesn't assume white-on-black as the
  # default color pair,  but many `ANSI' terminals don't grok the <op> cap.
  ecma+color|color control for ECMA-48-compatible terminals,
          AX,
          colors#8, ncv#3, pairs#64,
          op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
  # Attribute control for ECMA-48-compatible terminals
  ecma+sgr|attribute capabilities for true ECMA-48 terminals,
          rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,
  # For comparison, here are all the capabilities implied by the Intel
  # Binary Compatibility Standard (level 2) that fit within terminfo.
  # For more detail on this rather pathetic standard, see the comments
  # near the end of this file.
  ibcs2|Intel Binary Compatibility Standard prescriptions,
          cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
          cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
          dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
          hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
          indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
          smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
  #### ANSI/ECMA-48 terminals and terminal emulators
  #
 Line 474
 Line 474
 Line 474
  # and more than one page of memory.  It uses local motions instead of
  # direct cursor addressing, and makes almost no assumptions. It does
  # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
  ansi-mr|mem rel cup ansi,
          am, xon,
          cols#80, lines#24, use=vanilla, use=ansi+erase,
          use=ansi+local1,
  # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
  # beware of screen size problems and memory relative cursor addressing.
  ansi-mini|any ansi terminal with pessimistic assumptions,
          am, xon,
          cols#80, lines#24, use=vanilla, use=ansi+cup,
          use=ansi+erase,
  # ansi-mtabs adds relative addressing and minimal tab support
  ansi-mtabs|any ansi terminal with pessimistic assumptions,
          it#8,
          ht=^I, use=ansi+local1, use=ansi-mini,
  # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
  #
 Line 518
 Line 518
 Line 518
  # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
  #
  # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
  ansi77|ansi 3.64 standard 1977 version,
          OTbs, am, mir,
          cols#80, it#8, lines#24,
          bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
          home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
          kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
          rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
          smso=\E[7m, smul=\E[4m,
  # Procomm and some other ANSI emulations don't recognize all of the ANSI-
  # standard capabilities.  This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
  # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
  # <cuf1>, <cud1> and <cub1>.  Also deleted <ich> and <ich1>, as QModem up to
  # 5.03 doesn't recognize these.  Finally, we delete <rep> and <ri>, which seem
  # to confuse many emulators.  On the other hand, we can count on these programs
  # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
  # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
  # ANSI.SYS influence.
  # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
  pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
          OTbs, am, mir, msgr,
          cols#80, it#8, lines#24,
          bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
          cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
          dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
          hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g,
          use=klone+sgr-dumb,
  pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
          lines#25, use=pcansi-m,
  pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
          lines#33, use=pcansi-m,
  pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
          lines#43, use=pcansi-m,
  # The color versions.  All PC emulators do color...
  pcansi|ibm-pc terminal programs claiming to be ansi,
          use=klone+color, use=pcansi-m,
  pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
          lines#25, use=pcansi,
  pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
          lines#33, use=pcansi,
  pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
          lines#43, use=pcansi,
  # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
  # If you want pound signs rather than dollars, replace `B' with `A'
  # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
  # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
  ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
          mc5i,
          cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
          cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
          ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
          ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
          kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
          rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
          s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g,
          vpa=\E[%i%p1%dd, use=pcansi-m,
  ansi+enq|ncurses extension for ANSI ENQ,
          u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
 Line 588
 Line 588
 Line 588
  # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
  # standard terminfo.  Assumes ANSI.SYS-compatible attributes and color.
  # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
  ansi|ansi/pc-term compatible with color,
          use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m,
  # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
  # all the normal ANSI stuff with no extensions. It assumes
  # insert/delete line/char is there, so it won't work with
  # vt100 clones. It assumes video attributes for bold, blink,
  # underline, and reverse, which won't matter much if the terminal
  # can't do some of those. Padding is assumed to be zero, which
  # shouldn't hurt since xon/xoff is assumed.
  ansi-generic|generic ansi standard terminal,
          am, xon,
          cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
          use=ansi+rca, use=ansi+erase, use=ansi+tabs,
          use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
          use=ansi+sgrbold, use=ansi+arrows,
  #### DOS ANSI.SYS variants
  #
 Line 613
 Line 613
 Line 613
  # though undocumented.  The <pfkey> capability is untested but should work for
  # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
  # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
  ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
          OTbs, am, mir, msgr, xon,
          cols#80, lines#25,
          clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
          is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
          khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u,
          rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
          u7=\E[6n, use=klone+color, use=klone+sgr8,
  # Keypad:       Home=\0G        Up=\0H  PrPag=\0I
 Line 643
 Line 643
 Line 643
  # and control overrides shift.
  #
  # <pfkey> capability for F1-F48 -TD
  ansi.sys|ANSI.SYS 3.1 and later versions,
          el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q,
          kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
          kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205,
 Line 672
 Line 672
 Line 672
  # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
  # Consequently the End keypad key could not be set (it is relatively safe and
  # actually useful because it sends ^@ O, which beeps and opens a line above).
  ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
          is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
          rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
          smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
          use=ansi.sys,
  #
  # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
  nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
          dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
          is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n,
          use=ansi.sys,
  #
  # See ansi.sysk and nansi.sys above.
  nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
          dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
          is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
          use=ansi.sysk,
  #### ANSI console types
  #
+ #############################################################################
+ #
+ # Atari ST terminals.
+ # From Guido Flohr <gufl0000@stud.uni-sb.de>.
+ #
+ tw52|tw52-color|Toswin window manager with color,
+         bce,
+         colors#16, pairs#256,
+         oc=\Eb?\Ec0, op=\Eb?\Ec0,
+         setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+         setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+         setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+         setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c,
+         use=tw52-m,
+ tw52-m|Toswin window manager monochrome,
+         ul,
+         ma#999,
+         bold=\Eya, dch1=\Ea, dim=\EyB,
+         is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ,
+         rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_,
+         smso=\EyQ, smul=\EyH, use=at-m,
+ tt52|Atari TT medium and high resolution,
+         lines#30, use=at-color,
+ st52-color|at-color|atari-color|atari_st-color|Atari ST with color,
+         bce,
+         colors#16, pairs#256,
+         is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0,
+         setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+         setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+         setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+         setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?,
+         use=st52,
+ st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST,
+         am, eo, mir, npc,
+         cols#80, it#8, lines#24,
+         bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED,
+         cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+         cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I,
+         il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H,
+         kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177,
+         kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
+         kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ,
+         kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW,
+         kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea,
+         kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq,
+         rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep,
+ tw100|toswin vt100 window mgr,
+         eo, mir, msgr, xon,
+         colors#8, cols#80, it#8, lines#24, pairs#64, vt#3,
+         acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~..--++\,\,hhII00,
+         bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef,
+         clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr,
+         cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
+         cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
+         cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM,
+         dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I,
+         hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H,
+         kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177,
+         kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es,
+         kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ,
+         kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
+         kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI,
+         knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE,
+         oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM,
+         rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>,
+         rmso=\E[m, rmul=\E[m,
+         rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>,
+         sc=\E7,
+         setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
+         setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m,
+         sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh,
+         smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
+ # The entries for stv52 and stv52pc probably need a revision.
+ stv52|MiNT virtual console,
+         am, msgr,
+         cols#80, it#8, lines#30,
+         bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
+         cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+         cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
+         dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
+         ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+         kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
+         kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
+         kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
+         kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
+         kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
+         op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_,
+         rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_,
+         smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH,
+ stv52pc|MiNT virtual console with PC charset,
+         am, msgr,
+         cols#80, it#8, lines#30,
+         acsc=`\177a\260f\370g\361j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371.v-\^+\257\,\256h\261I\3740\333,
+         bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE,
+         cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
+         cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.",
+         dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
+         ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+         kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq,
+         kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew,
+         kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET,
+         kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE,
+         kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>,
+         rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq,
+         rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_,
+         smso=\Ep, smul=\EyH,
+ #### Atari ST
+ #
+ # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
+ atari-old|atari st,
+         OTbs, am,
+         cols#80, it#8, lines#25,
+         clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
+         cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
+         ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
+         kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
+ # UniTerm terminal program for the Atari ST:  49-line VT220 emulation mode
+ # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
+ uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
+         lines#49,
+         is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
+         use=vt220,
+ # MiNT VT52 emulation. 80 columns, 25 rows.
+ # MiNT is Now TOS, the operating system which comes with all Ataris now
+ # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
+ # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
+ # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
+ st52-old|Atari ST with VT52 emulation,
+         am, km,
+         cols#80, lines#25,
+         bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
+         cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
+         cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
+         ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
+         kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
+         kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
+         kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
+         kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
+         ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
+         smcup=\Ee, smso=\Ep,
  #### BeOS
  #
  # BeOS entry for Terminal program Seems to be almost ANSI
  beterm|BeOS Terminal,
          am, eo, mir, msgr, xenl, xon,
          colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
          bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H,
          hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
          il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~,
          kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~,
          kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
          kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~,
          khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
          nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l,
          rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
          setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
          setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
          sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m,
          smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n,
          vpa=\E[%i%p1%dd,
  #### Linux consoles
  #
-Line 747
+Line 890
 Line 747
 Line 890
  # themselves; this entry assumes that capability.
  #
  linux-basic|linux console,
          am, bce, eo, mir, msgr, xenl, xon,
          it#8, ncv#18,
          acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
          bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
          el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
          hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
          il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
          kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
          kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
          kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
          kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
          kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
          khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
          kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
          rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
          sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
          smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g,
          vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr,
          use=ecma+color,
  linux-m|Linux console no color,
          colors@, pairs@,
          setab@, setaf@, setb@, setf@, use=linux,
  # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
  # and it matters, turn off <ccc>.  The %02x escape used to implement this is
-Line 781
+Line 924
 Line 781
 Line 924
  # on Solaris for several years) and not supported in ncurses versions before
  # 1.9.9.
  linux-c-nc|linux console with color-change,
          ccc,
          initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
          oc=\E]R, use=linux-basic,
  # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
  linux-c|linux console 1.3.6+ for older ncurses,
          ccc,
          initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;,
          oc=\E]R, use=linux-basic,
-Line 807
+Line 950
 Line 807
 Line 950
          bce@, use=linux,
  # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
  linux-nic|linux with ich/ich1 suppressed for non-curses programs,
          ich@, ich1@, use=linux,
  # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
  # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
  linux-koi8|linux with koi8 alternate character set,
          acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
          use=linux, use=klone+koi8acs,
  # Another entry for KOI8-r with Qing Long's acsc.
  # (which one better complies with the standard?)
  linux-koi8r|linux with koi8-r alternate character set,
          use=linux, use=klone+koi8acs,
  # Entry for the latin1 and latin2 fonts
  linux-lat|linux with latin1 or latin2 alternate character set,
          acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
          use=linux,
  # This uses graphics from VT codeset instead of from cp437.
  # reason: cp437 (aka "straight to font") is not functional under luit.
-Line 860
+Line 1003
 Line 860
 Line 1003
          setaf=\E[3%p1%{7}%m%d%?%p1%{7}%>%t;1%e;21%;m,
          use=linux,
+ # bterm (bogl 0.1.18)
+ # Implementation is in bogl-term.c
+ # Key capabilities from linux terminfo entry
+ #
+ # Notes:
+ # bterm only supports acs using wide-characters, has case for these: qjxamlkut
+ # bterm does not support sgr, since it only processes one parameter -TD
+ bterm|bogl virtual terminal,
+         am, bce,
+         colors#8, cols#80, lines#24, pairs#64,
+         acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l,
+         clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J,
+         cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J,
+         kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
+         kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
+         kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+         kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+         kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
+         kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
+         kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
+         kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J,
+         op=\E49;39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m,
+         rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
+         sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m,
  #### Mach
  #
  # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
  mach|Mach Console,
          am, km,
          cols#80, it#8, lines#25,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
          kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
          kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
          kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
          kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
          smso=\E[7m, smul=\E[4m,
  mach-bold|Mach Console with bold instead of underline,
          rmul=\E[0m, smul=\E[1m, use=mach,
  mach-color|Mach Console with ANSI color,
          colors#8, pairs#64,
          dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
          setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach,
  # From: Marcus Brinkmann
  # http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/
-Line 946
+Line 1114
 Line 946
 Line 1114
  #
  # OSF/1 1.1 Snapshot 2
  pmcons|pmconsole|PMAX console,
          am,
          cols#128, lines#57,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
          ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
  # SCO console and SOS-Syscons console for 386bsd
  # (scoansi: had unknown capabilities
-Line 982
+Line 1150
 Line 982
 Line 1150
  #
  # Console documents only 3 attributes can be set with SGR (so we don't use sgr).
  scoansi-old|SCO Extended ANSI standard crt (5.0.5),
          OTbs, am, bce, eo, xon,
          colors#8, cols#80, it#8, lines#25, pairs#64,
          acsc=-\230.\231\,.+/0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
          civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
-Line 1029
+Line 1197
 Line 1029
 Line 1197
  # This actually describes the generic SVr4 display driver for Intel boxes.
  # The <dim=\E[2m> isn't documented and therefore may not be reliable.
  # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
  att6386|at386|386at|AT&T WGS 6386 console,
          am, bw, eo, xon,
          cols#80, it#8, lines#25,
          acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
          clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
          cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
          cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
          home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
          ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
          indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
          kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
          kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
          kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
          knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
          ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
          sc=\E7,
          sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
          sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color,
  # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
  pc6300plus|AT&T 6300 plus,
          OTbs, am, xon,
          cols#80, lines#24,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
          clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
          cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
          dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
          home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
          invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
          kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
          nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
          smso=\E[7m, smul=\E[4m, tbc=\E[3g,
  # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
  #
-Line 1073
+Line 1241
 Line 1073
 Line 1241
  # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
  # is broken. All the special key sequences are broken, making it unusable
  # with Emacs. The problem stems from the following:
  #
  # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
  # keypad!), loadable fonts, and strange highlighting modes ("dithered"
  # half-intensity, "smeared" bold, and real strike-out, for example.) It also
  # uses resizable terminal windows, but the bundled terminal program always
  # uses an 80x24 window (and doesn't support seem to support a 132-column
  # mode.)
  #
  # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
  # library which was a superset of SVr3.5 curses (called tam, for "terminal
  # access method".) tam includes support for real, overlapping windows,
-Line 1096
+Line 1264
 Line 1096
 Line 1264
  # (If you're interested in adding some of the tam calls to ncurses, btw, I
  # have the full documentation and several programs which use tam. It also
  # used an extended terminfo format to describe key sequences, special
  # highlighting modes, etc.)
  #
  # KEYS: This means that ncurses would quite painful on the UNIX PC, since
  # there are two sequences for every key-modifier combination (local keyboard
  # sequence and remote "VT100" sequence.) But I doubt many people are trying
  # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
  # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
  # seem to have been built from the manual describing the VT100 sequences.
  # This means it doesn't work for a real live UNIX PC.
  #
  # FONTS: The UNIX PC also has a strange interpretation of "alternate
  # character set". Rather than the VT100 graphics you might expect, it allows
  # up to 8 custom fonts to be loaded at any given time. This means that
  # programs expecting VT100 graphics will usually be disappointed. For this
  # reason I have disabled the smacs/rmacs sequences, but they could easily be
  # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
  # manpage), should you wish to do so:
  #
  # SGR10 - Select font 0 - ESC [ 10 m or SO
  # SGR11 - Select font 1 - ESC [ 11 m or SI
  # SGR12 - Select font 2 - ESC [ 12 m
  # ... (etc.)
  # SGR17 - Select font 7 - ESC [ 17 m
  #
  # Graphics for line drawing are not reliably found at *any* character
  # location because the UNIX PC has dynamically reloadable fonts. I use font
  # 0 for regular text and font 1 for italics, but this is by no means
  # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
  #
  # MISC: The cursor visible/cursor invisible sequences were swapped in the
  # distributed terminfo.
  #
  # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
  # the UNIX PC terminfo entry. The modified version works great with Lynx,
  # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
  # attached by serial cable. In Emacs, even the Undo key works, and many
  # applications can now use the F1-F8 keys.
  #
  # esr's notes:
  #       Terminfo entry for the AT&T Unix PC 7300
  #       from escape(7) in Unix PC 7300 Manual.
-Line 1148
+Line 1316
 Line 1148
 Line 1316
  #       *     into font memory slot #1.  Once the font has been loaded,
  #       *     it can be used as an alternative character set.
  #       *
  #       *     The call to ioctl with the argument WIOCLFONT is the key
  #       *     to this routine.  For more information, see window(7) in
  #       *     the PC 7300 documentation.
  #       ***************************************************************/
  #       #include <string.h>             /* needed for strcpy call */
-Line 1164
+Line 1332
 Line 1164
 Line 1332
  #       *     cfont <filename>.  For further information on fonts see
  #       *     cfont(1) in the PC 7300 documentation.
  #       */
  #
  #       struct altfdata         /* structure for alt font data */
  #       {
  #       short   altf_slot;              /* memory slot number */
-Line 1184
+Line 1352
 Line 1184
 Line 1352
  # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
  # they're confirmed by the man page for the System V display---esr)
  #
  att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
          am, xon,
          cols#80, it#8, lines#24,
          bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
          clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
          cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
          cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
          ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
          il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
          kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
          kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
          kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
          kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
          kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
          kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
          ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
          kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
          kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
          kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
          kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
          kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
          ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
          rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
          smul=\E[4m,
  # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
  # from SGI's terminfo database.  SGI's entry shows F9-F12 with the codes
-Line 1244
+Line 1412
 Line 1244
 Line 1412
  #
  #       control-tab     \[072q
  #
  iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
          am,
          cols#80, it#8, lines#40,
          bel=^G, bold=\E[1m, clear=\E[H\E[2J,
          cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
          cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
          cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
          home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
          is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
          kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
          kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
          kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
          kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
          kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
          kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
          knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
          kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
          rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
          sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
          tbc=\E[3g,
  iris-ansi-ap|IRIS ANSI in application-keypad mode,
          is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
          kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi,
  # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
  # (T.Dickey 98/1/24)
  iris-color|xwsh|IRIX ANSI with color,
          ncv#33,
          csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
          ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
          rmul=\E[24m, rs1=\Ec,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sitm=\E[3m, use=vt100+enq, use=klone+color,
          use=iris-ansi-ap,
-Line 1289
+Line 1457
 Line 1289
 Line 1457
  # underline modes have been added.  Note: this entry describes the "native"
  # capabilities of the PC monochrome display, without ANY emulation; most
  # communications packages (but NOT PC/IX connect) do some kind of emulation.
  pcix|PC/IX console,
          am, bw, eo,
          cols#80, lines#24,
          clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
          home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
          smul=\E[4m,
  # (ibmpcx: this entry used to be known as ibmx.
  # It formerly included the following extension capabilities:
-Line 1308
+Line 1476
 Line 1308
 Line 1476
  # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
  # ":kh=\E[Y:".  Added IBM-PC forms characters and highlights, they match
  # what was there before. -- esr)
  ibmpcx|xenix|ibmx|IBM PC xenix console display,
          OTbs, am, msgr,
          cols#80, lines#25,
          clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
          ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
          kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
          kpp=\E[Z, use=klone+acs, use=klone+sgr8,
  #### QNX
-Line 1329
+Line 1497
 Line 1329
 Line 1497
  # optimization.  Bug: The <op> capability resets attributes.
  # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
  # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
  qnx|qnx4|qnx console,
          daisy, km, mir, msgr, xhpa, xt,
          colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
          acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
          bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
          cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
          dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
          il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
          kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
          kDL=\377\366, kEND=\377\301, kEOL=\377\311,
          kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
          kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
          kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
          kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
          kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
          kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
          kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
          kclo=\377\343, kclr=\377\341, kcmd=\377\245,
          kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
          kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
          kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
          ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
          kext=\377\270, kf1=\377\201, kf10=\377\212,
          kf11=\377\256, kf12=\377\257, kf13=\377\213,
          kf14=\377\214, kf15=\377\215, kf16=\377\216,
          kf17=\377\217, kf18=\377\220, kf19=\377\221,
          kf2=\377\202, kf20=\377\222, kf21=\377\223,
          kf22=\377\224, kf23=\377\333, kf24=\377\334,
          kf25=\377\225, kf26=\377\226, kf27=\377\227,
          kf28=\377\230, kf29=\377\231, kf3=\377\203,
          kf30=\377\232, kf31=\377\233, kf32=\377\234,
          kf33=\377\235, kf34=\377\236, kf35=\377\276,
          kf36=\377\277, kf37=\377\321, kf38=\377\322,
          kf39=\377\323, kf4=\377\204, kf40=\377\324,
          kf41=\377\325, kf42=\377\326, kf43=\377\327,
          kf44=\377\330, kf45=\377\331, kf46=\377\332,
          kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
          kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
          khlp=\377\350, khome=\377\240, khts=\377\342,
          kich1=\377\253, kil1=\377\273, kind=\377\261,
          kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
          knp=\377\252, knxt=\377\312, kopn=\377\357,
          kopt=\377\353, kpp=\377\242, kprt=\377\255,
          kprv=\377\302, krdo=\377\336, kref=\377\354,
          kres=\377\360, krfr=\377\347, kri=\377\271,
          krmir=\377\313, krpl=\377\362, krst=\377\352,
          ksav=\377\361, kslt=\377\247, kspd=\377\335,
          ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
          rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
          rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
          setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
          smso=\E(, smul=\E[,
  #
  #
  qnxt|qnxt4|QNX4 terminal,
          crxm, use=qnx4,
  #
  qnxm|QNX4 with mouse events,
          maddr#1,
          chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h,
          mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l,
          mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l,
          smicm=\E/>2h, use=qnx4,
  #
  qnxw|QNX4 windows,
          xvpa, use=qnxm,
  #
  #       Monochrome QNX4 terminal or console. Setting this terminal type will
  #       allow an application running on a color console to behave as if it
-Line 1403
+Line 1571
 Line 1403
 Line 1571
  #       console writes because the term routines will recognize that the
  #       terminal name starts with 'qnxt'.
  #
  qnxtmono|Monochrome QNX4 terminal or console,
          colors@, pairs@,
          scp@, use=qnx4,
  # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
  # (esr: commented out <scp> and <rmcup> to avoid warnings.)
  # (TD: derive from original qnx4 entry)
  qnxt2|qnx 2.15 serial terminal,
          am,
          civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
          rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4,
  # QNX ANSI terminal definition
  qansi-g|QNX ANSI,
          am, eslok, hs, xon,
          colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~Oa,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J,
          el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l,
          fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
          ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L,
          ind=\E[S, indn=\E[%p1%dS, invis=\E[9m,
          is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0,
          kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt,
          kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h,
          kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c,
          kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa,
          kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y,
          kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA,
          kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt,
          kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx,
          kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~,
          kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~,
          kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~,
          kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~,
          kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~,
          kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~,
          kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU,
          kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh,
          khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a,
          kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo,
          kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg,
          kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T,
          ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m,
          rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T,
          rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m,
          rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
          setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
          setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
          sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g,
          tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH,
  #
  qansi|QNX ansi with console writes,
          daisy, xhpa, use=qansi-g,
  #
  qansi-t|QNX ansi without console writes,
          crxm, use=qansi,
  #
  qansi-m|QNX ansi with mouse,
          maddr#1,
          chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h,
          mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l,
          mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l,
          smicm=\E[>2h, use=qansi,
  #
  qansi-w|QNX ansi for windows,
          xvpa, use=qansi-m,
  #### NetBSD consoles
  #
-Line 1494
+Line 1662
 Line 1494
 Line 1662
  # NOTE: <ich1> has been taken out of this entry. for reference, it should
  # be <ich1=\E[@>.  For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
  # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
  pcvtXX|pcvt vt200 emulator (DEC VT220),
          am, km, mir, msgr, xenl,
          it#8, vt#3,
          acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
          il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
          is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
          kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
          khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
          nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
          ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
          rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
          rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
          smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
  #       NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
  #       termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
  #       50 lines entries; 80 columns
  pcvt25|dec vt220 emulation with 25 lines,
          cols#80, lines#25,
          is2=\E[1;25r\E[25;1H, use=pcvtXX,
  pcvt28|dec vt220 emulation with 28 lines,
          cols#80, lines#28,
          is2=\E[1;28r\E[28;1H, use=pcvtXX,
  pcvt35|dec vt220 emulation with 35 lines,
          cols#80, lines#35,
          is2=\E[1;35r\E[35;1H, use=pcvtXX,
  pcvt40|dec vt220 emulation with 40 lines,
          cols#80, lines#40,
          is2=\E[1;40r\E[40;1H, use=pcvtXX,
  pcvt43|dec vt220 emulation with 43 lines,
          cols#80, lines#43,
          is2=\E[1;43r\E[43;1H, use=pcvtXX,
  pcvt50|dec vt220 emulation with 50 lines,
          cols#80, lines#50,
          is2=\E[1;50r\E[50;1H, use=pcvtXX,
  #       NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
  #       termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
  #       50 lines entries; 132 columns
  pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
          cols#132, lines#25,
          is2=\E[1;25r\E[25;1H, use=pcvtXX,
  pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
          cols#132, lines#28,
          is2=\E[1;28r\E[28;1H, use=pcvtXX,
  pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
          cols#132, lines#35,
          is2=\E[1;35r\E[35;1H, use=pcvtXX,
  pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
          cols#132, lines#40,
          is2=\E[1;40r\E[40;1H, use=pcvtXX,
  pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
          cols#132, lines#43,
          is2=\E[1;43r\E[43;1H, use=pcvtXX,
  pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
          cols#132, lines#50,
          is2=\E[1;50r\E[50;1H, use=pcvtXX,
  #       OpenBSD implements a color variation
  pcvt25-color|dec vt220 emulation with 25 lines and color,
-Line 1577
+Line 1745
 Line 1577
 Line 1745
  # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
  # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
  # typo in invis - TD
  arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
          am, bce, msgr, xenl, xon,
          cols#80, it#8, lines#30,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
          clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C$<2>,
          cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
          cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
          enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
          invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
          kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
          kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
          kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
          rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
          rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
          sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>,
          sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
          smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr,
          use=klone+color,
  arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
          cols#132, lines#50, use=arm100,
  # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
  # manufactured by Sharp for the Japenese market.
  # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
  x68k|x68k-ite|NetBSD/x68k ITE,
          cols#96, lines#32,
          kclr=\E[9~, khlp=\E[28~, use=vt220,
  # <tv@pobox.com>:
  # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
  #
  # (still unfinished, but good enough so far.)
  ofcons|DNARD OpenFirmware console,
          bw,
          cols#80, lines#30,
          bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
          cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
          cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
          cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
          dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
          flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
          il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
          kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
          kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
          kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
          kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
          rmso=\2330m, rmul=\2330m,
          sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
          sgr0=\2330m,
-Line 1645
+Line 1813
 Line 1645
 Line 1813
  # from Kermit's emulation of vt220, does not correspond to actual vt220.  At
  # the level of detail in a termcap, it is a passable emulator, since ECH does
  # work.  Don't use it on a VMS system -TD
  wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
          bce, msgr,
          colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64,
          is2=\E[r\E[25;1H, kend=\E[8~, kf1=\E[11~, kf10=\E[21~,
          kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~,
          kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
-         kf9=\E[20~, khome=\E[7~, op=\E[m, setab=\E[4%p1%dm,
+         kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec,
-         setaf=\E[3%p1%dm, use=vt220,
+         setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220,
  wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
          km, use=wsvt25,
  # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
  # DECstation/pmax.
  rcons|BSD rasterconsole,
          use=sun-il,
  # Color version of above. Color currently only provided by NetBSD.
  rcons-color|BSD rasterconsole with ANSI color,
          bce,
          colors#8, pairs#64,
          op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons,
  # mgterm -- MGL/MGL2, MobileGear Graphic Library
  # for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k}
  # -- the setf/setb are probably incorrect, more likely setaf/setab -TD
  # -- compare with cons25w
  mgterm,
          OTbs, OTpt, am, bce, bw, eo, km, msgr, npc,
          colors#8, cols#80, it#8, lines#18, pairs#64,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
          cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM,
          dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
          home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
          ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
          indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F,
          kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N,
          kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
          kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I,
          nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
          rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm,
          setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
  #### FreeBSD console entries
  #
-Line 1720
+Line 1888
 Line 1720
 Line 1888
  #       F13-F24 are shifted F1-F12
  #       F25-F36 are control F1-F12
  #       F37-F48 are shift+control F1-F12
  cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
          am, bce, bw, eo, msgr, npc,
          colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
          cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
          cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
          dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
          home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@,
          ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
-Line 1748
+Line 1916
 Line 1748
 Line 1916
          setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
          sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
          sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd,
  cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
          acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
          use=cons25w,
  cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
          colors@, pairs@,
          bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
          sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
          smul=\E[4m, use=cons25,
  cons30|ansi80x30|freebsd console (30-line ansi mode),
          lines#30, use=cons25,
  cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
          lines#30, use=cons25-m,
  cons43|ansi80x43|freebsd console (43-line ansi mode),
          lines#43, use=cons25,
  cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
          lines#43, use=cons25-m,
  cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
          lines#50, use=cons25,
  cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
          lines#50, use=cons25-m,
  cons60|ansi80x60|freebsd console (60-line ansi mode),
          lines#60, use=cons25,
  cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
          lines#60, use=cons25-m,
  cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
          acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
          use=cons25w,
  cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
          colors@, pairs@,
          op@, rmul=\E[m, setab@, setaf@,
          sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m,
          smul=\E[4m, use=cons25r,
  cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
          lines#50, use=cons25r,
  cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
          lines#50, use=cons25r-m,
  cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
          lines#60, use=cons25r,
  cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
          lines#60, use=cons25r-m,
  # ISO 8859-1 FreeBSD console
  cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
          acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
          use=cons25w,
  cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
          colors@, pairs@,
          bold@, dim@, op@, rmul=\E[m, setab@, setaf@,
          sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m,
          smul=\E[4m, use=cons25l1,
  cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
          lines#50, use=cons25l1,
  cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
          lines#50, use=cons25l1-m,
  cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
          lines#60, use=cons25l1,
  cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
          lines#60, use=cons25l1-m,
  #### 386BSD and BSD/OS Consoles
  #
  # This was the original 386BSD console entry (I think).
  # Some places it's named oldpc3|oldibmpc3.
  # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
  origpc3|origibmpc3|IBM PC 386BSD Console,
          OTbs, am, bw, eo, xon,
          cols#80, lines#25,
          acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
          bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
          home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
          rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
          smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
  # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
  oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
          OTbs, km,
          lines#25,
          bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
          ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
          knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
  # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
  # Note, the emulator supports many of the additional console features
-Line 1838
+Line 2006
 Line 1838
 Line 2006
  # are described here.  This entry really ought to be upgraded.
  # Also note, the console will also work with fewer lines after doing
  # "stty rows NN", e.g. to use 24 lines.
  # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
  # Bug: The <op> capability resets attributes.
  bsdos-pc|IBM PC BSD/OS Console,
          sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
          use=bsdos-pc-nobold,
  bsdos-pc-nobold|BSD/OS PC console w/o bold,
          use=klone+color, use=bsdos-pc-m,
  bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono,
          OTbs, am, eo, km, xon,
          cols#80, it#8, lines#25,
          bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
          il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
          kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
          sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
          use=klone+sgr8,
  # Old names for BSD/OS PC console used in releases before 4.1.
  pc3|BSD/OS on the PC Console,
          use=bsdos-pc-nobold,
  ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
          use=bsdos-pc,
- # BSD/OS on the SPARC
- bsdos-sparc|Sun SPARC BSD/OS Console,
-         use=sun,
- # BSD/OS on the PowerPC
- bsdos-ppc|PowerPC BSD/OS Console,
-         use=bsdos-pc,
+ # BSD/OS on the SPARC
+ bsdos-sparc|Sun SPARC BSD/OS Console,
+         use=sun,
+ # BSD/OS on the PowerPC
+ bsdos-ppc|PowerPC BSD/OS Console,
+         use=bsdos-pc,
  #### DEC VT52
  # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
  #
-Line 1892
+Line 2060
 Line 1892
 Line 2060
  # not be used as a guide to the capabilities of the vt52.  Note in particular
  # that vt52 does not support line-drawing characters (the scan-X values refer
  # to a crude plotting feature) -TD
  vt52|dec vt52,
          OTbs,
          cols#80, it#8, lines#24,
          acsc=ffgghhompoqqss.k, bel=^G, clear=\EH\EJ, cr=^M,
          cub1=\ED, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
          el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
  #### DEC VT100 and compatibles
  #
-Line 1910
+Line 2078
 Line 1910
 Line 2078
  #
  # Except where noted, these entries are DEC's official terminfos.
  # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
  # Engineering for more information.  Updated terminfos and termcaps
  # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
  #
  # In October 1995 DEC sold its terminals business, including the VT and Dorio
-Line 1931
+Line 2099
 Line 1931
 Line 2099
  # you output the char in column 80, immediately output CR LF
  # and then assume you are in column 1 of the next line. If <xenl>
  # is on, am should be on too.
  #
  # I assume you have smooth scroll off or are at a slow enough baud
  # rate that it doesn't matter (1200? or less). Also this assumes
  # that you set auto-nl to "on", if you set it off use vt100-nam
  # below.
  #
  # The padding requirements listed here are guesses. It is strongly
  # recommended that xon/xoff be enabled, as this is assumed here.
  #
  # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
  # tab settings are in non-volatile memory and don't need to be
  # reset upon login. Also setting the number of columns glitches
  # the screen annoyingly. You can type "reset" to get them set.
  #
  # The VT100 series terminals have cursor ("arrows") keys which can operate
-Line 1966
+Line 2134
 Line 1966
 Line 2134
  # The Numeric Keypad which can operate in two different modes: Numeric Mode and
  # Application Mode.  Numeric Mode is the reset state, and is assumed to be
  # the normal state.  Application Mode is the "set" state.  In Numeric Mode,
  # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
  # Enter key transmits the same as the Return key (Note: the Return key
  # can be configured to send either LF (\015) or CR LF).  In Application Mode,
  # all the keypad keys transmit "Esc O {code}" sequences.  The PF1 - PF4 keys
-Line 2054
+Line 2222
 Line 2054
 Line 2222
  #
  # And here, for those of you with orphaned VT100s lacking documentation, is
  # a description of the soft switches invoked when you do `Set Up'.
  #
  #  Scroll 0-Jump               Shifted 3   0-#
  #  |      1-Smooth             |           1-British pound sign
  #  | Autorepeat 0-Off          | Wrap Around 0-Off
-Line 2086
+Line 2254
 Line 2086
 Line 2254
  #       INTERLACE_OFF
  #
  # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
  vt100|vt100-am|dec vt100 (w/advanced video),
          OTbs, am, mc5i, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
          clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C$<2>,
          cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
          cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
          enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,
          lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
          rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
          rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
          sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
          smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
          use=vt100+fnkeys,
  vt100nam|vt100-nam|vt100 no automargins,
          am@, xenl@, use=vt100-am,
  vt100-vb|dec vt100 (w/advanced video) & no beep,
          bel@, flash=\E[?5h\E[?5l, use=vt100,
  # Ordinary vt100 in 132 column ("wide") mode.
  vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
          cols#132, lines#24,
          rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
  vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
          cols#132, lines#14, vt@,
          rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
  # vt100 with no advanced video.
  vt100-nav|vt100 without advanced video option,
          xmc#1,
          blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
          smul@, use=vt100,
  vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
          cols#132, lines#14, use=vt100-nav,
  # vt100 with one of the 24 lines used as a status line.
  # We put the status line on the top.
  vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
          eslok, hs,
          lines#23,
          clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
          cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
          fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
          tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
  # Status line at bottom.
  # Clearing the screen will clobber status line.
  vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
          eslok, hs,
          lines#23,
          dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
          tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am,
  # Most of the `vt100' emulators out there actually emulate a vt102
  # This entry (or vt102-nsgr) is probably the right thing to use for
  # these.
  vt102|dec vt102,
          dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h,
          use=vt100,
  vt102-w|dec vt102 in wide mode,
          cols#132,
          rs3=\E[?3h, use=vt102,
  # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
  # fail to interpret the ^O and ^N escapes properly.  Symptom: the <sgr0>
  # string in the canonical vt100 entry above leaves the screen littered
  # with little  snowflake or star characters (IBM PC ROM character \017 = ^O)
  # after highlight turnoffs.  This entry should fix that, and even leave
  # ACS support working, at the cost of making multiple-highlight changes
  # slightly more expensive.
  # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
  vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
          sgr@, sgr0=\E[m, use=vt102,
  # VT125 Graphics CRT.  Clear screen also erases graphics
  # Some vt125's came configured with vt102 support.
  vt125|vt125 graphics terminal,
          mir,
          clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
  # This isn't a DEC entry, it came from University of Wisconsin.
  # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
  vt131|dec vt131,
          OTbs, am, xenl,
          cols#80, it#8, lines#24, vt#3,
          bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
          clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
          cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
          ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
          is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
          kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
          kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
          rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
          rmul=\E[m$<2/>,
          rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
          smso=\E[7m$<2/>, smul=\E[4m$<2/>,
  # vt132 - like vt100 but slower and has ins/del line and such.
  # I'm told that <smir>/<rmir> are backwards in the terminal from the
  # manual and from the ANSI standard, this describes the actual
  # terminal. I've never actually used a vt132 myself, so this
  # is untested.
  #
  vt132|DEC vt132,
          xenl,
          dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
          ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100,
  # This vt220 description maps F5--F9 to the second block of function keys
  # at the top of the keyboard.  The "DO" key is used as F10 to avoid conflict
-Line 2208
+Line 2376
 Line 2208
 Line 2376
  # PF1--PF4 are used as F1--F4.
  #
  vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
          OTbs, OTpt, am, mir, xenl, xon,
          cols#80, lines#24, vt#3,
          OTnl=^J,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
          clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
          dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
          if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
          is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
          kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
          kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
          khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
          rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
          ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
          rmso=\E[27m, rmul=\E[24m,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
          sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
          smso=\E[7m, smul=\E[4m,
  # A much better description of the VT200/220; used to be vt220-8
  # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
  # designation to accommodate bug in pcvt -TD
  vt220|vt200|dec vt220,
          OTbs, am, mc5i, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
          flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
          ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
          il=\E[%p1%dL, il1=\E[L, ind=\ED,
          is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=^H, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf10=\E[21~,
          kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
          kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
          kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
          kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
          kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
          lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i, mc4=\E[4i,
          mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
          rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
          rmul=\E[24m, rs1=\E[?3l, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
          sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
          smso=\E[7m, smul=\E[4m, tbc=\E[3g,
  vt220-w|vt200-w|DEC vt220 in wide mode,
          cols#132,
          rs3=\E[?3h, use=vt220,
  vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
          OTbs, am, mc5i, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
          csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
          cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
          cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
          dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
          ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
          flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
          ich=\233%p1%d@, if=/usr/share/tabset/vt100,
          il=\233%p1%dL, il1=\233L, ind=\ED,
          is2=\233?7h\233>\233?1h\E F\233?4l, kbs=^H,
          kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
          kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
          kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
          kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
          kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
          kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
          knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
          lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
          nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=\E(B,
          rmam=\233?7l, rmir=\2334l, rmso=\23327m, rmul=\23324m,
          rs1=\233?3l, sc=\E7,
          sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
          sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h,
          smso=\2337m, smul=\2334m, tbc=\2333g,
  # vt220d:
  # This vt220 description regards F6--F10 as the second block of function keys
  # at the top of the keyboard.  This mapping follows the description given
  # in the VT220 Programmer Reference Manual and agrees with the labeling
  # on some terminals that emulate the vt220.  There is no support for an F5.
  # See vt220 for an alternate mapping.
  #
  vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
          kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
          kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
          kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
          kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old,
  vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
          am@,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
  # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
  # (not an official DEC entry!)
-Line 2325
+Line 2493
 Line 2325
 Line 2493
  #
  # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
  # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
  vt200-js|vt220-js|dec vt200 series with jump scroll,
          am,
          cols#80,
          bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
          dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
          il1=\E[L, ind=\ED,
          is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
          rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
          rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
          rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
          smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
  # This was DEC's vt320.  Use the purpose-built one below instead
  #vt320|DEC VT320 in vt100 emulation mode,
  #       use=vt220,
  # Use v320n for SCO's LYRIX.  Otherwise, use Adam Thompson's vt320-nam.
  #
  vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
          am@,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
  # These entries are not DEC's official ones, they were purpose-built for the
  # VT320.  Here are the designer's notes:
  # <kel> is end on a PC kbd.  Actually 'select' on a VT.  Mapped to
  # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
  # khome is Home on a PC kbd.  Actually 'FIND' on a VT.
  # Things that use <knxt> usually use tab anyways... and things that don't use
-Line 2362
+Line 2530
 Line 2362
 Line 2530
  # and the resulting fact that it causes the termcap translation of the entry
  # to SMASH the 1k-barrier...
  # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
  # (vt320: uncommented <fsl> --esr)
  vt320|vt300|dec vt320 7 bit terminal,
          am, eslok, hs, mir, msgr, xenl,
          cols#80, lines#24, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
          home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
          il1=\E[L, ind=\ED,
          is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
          kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~,
-Line 2392
+Line 2560
 Line 2392
 Line 2560
          sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
          sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
          smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          tsl=\E[1$}\E[H\E[K, use=vt220+keypad,
  vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
          am@,
          is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
          use=vt320,
  # We have to init 132-col mode, not 80-col mode.
  vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
          cols#132, wsl#132,
          is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
          rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
          use=vt320,
  vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
          am@,
          is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
          rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H,
          use=vt320-w,
  # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
  #   which are pretty much a superset of the VT320.  They have the
-Line 2425
+Line 2593
 Line 2425
 Line 2593
  # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
  # keys were switched into application mode at the same time the numeric pad
  # is switched into application mode.  This changes the definitions of the
  # arrow keys.  Emacs v19 is smarter and mines its keys directly out of
  # your termcap or terminfo entry,
  #
  # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
  # (vt340: string capability "sb=\E[M" corrected to "sr";
  # also, added <rmam>/<smam> based on the init string -- esr)
  vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
          am, eslok, hs, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
          cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
          dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$},
          ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
          home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
          il1=\E[L, ind=\ED,
          is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
          kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
          lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
          rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
          rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
          rmul=\E[24m, rs1=\E[?3l, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
          sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
-Line 2459
+Line 2627
 Line 2459
 Line 2627
  # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
  # (originally written with vt420 as its primary name, and usable for it).
  #
  # VT400/420 -- This terminal is a superset of the vt320.  It adds the multiple
  #    text pages and long text pages with selectable length of the vt340, along
  #    with left and right margins, rectangular area text copy, fill, and erase
  #    operations, selected region character attribute change operations,
-Line 2472
+Line 2640
 Line 2472
 Line 2640
  # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
  # keys were switched into application mode at the same time the numeric pad
  # is switched into application mode.  This changes the definitions of the
  # arrow keys.  Emacs v19 is smarter and mines its keys directly out of
  # your termcap entry,
  #
  # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
  # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
  # also, added <rmam>/<smam> based on the init string -- esr)
  vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
          am, eslok, hs, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
          el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
          home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
          il=\E[%p1%dL, il1=\E[L, ind=\ED,
          is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
          kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
          lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
          rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B,
          rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
          rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
          sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
          smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          tsl=\E[2$~\E[1$}\E[1;%dH,
  # (vt420: I removed <kf0>, it collided with <kf10>.  I also restored
  # a missing <sc> -- esr)
  vt420|DEC VT420,
          am, mir, xenl, xon,
          cols#80, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
          clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
          dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
          if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
          is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
          kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
          kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
          kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
          rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
          rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
          rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
          rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
          sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
          smkx=\E=, smso=\E[7m, smul=\E[4m,
  # DEC VT220 and up support DECUDK (user-defined keys).  DECUDK (i.e., pfx)
  # takes two parameters, the key and the string.  Translating the key is
-Line 2537
+Line 2705
 Line 2537
 Line 2705
  # emulators define these):
  #
  #               if (key < 16) then  value = key;
  #               else if (key < 21) then value = key + 1;
  #               else if (key < 25) then value = key + 2;
  #               else if (key < 27) then value = key + 3;
  #               else if (key < 30) then value = key + 4;
  #               else value = key + 5;
  #
  # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
  # There's no provision in terminfo for emitting a string in this format, so the
  # application has to know it.
  #
  vt420pc|DEC VT420 w/PC keyboard,
          kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
          kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
          kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
          kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
          kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
          kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
          kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
          kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
          kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
          kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
          kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
          kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
          kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
          kf8=\E[19~, kf9=\E[20~, khome=\E[H,
          pctrm=USR_TERM\:vt420pcdos\:,
          pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
          use=vt420,
  vt420pcdos|DEC VT420 w/PC for DOS Merge,
          lines#25,
          dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;,
          pctrm@,
          rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
          sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc,
  vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
          kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
          kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
          kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
          kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
          kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
          khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
          use=vt420,
  vt510|DEC VT510,
          use=vt420,
  vt510pc|DEC VT510 w/PC keyboard,
          use=vt420pc,
  vt510pcdos|DEC VT510 w/PC for DOS Merge,
          use=vt420pcdos,
  # VT520/VT525
  #
-Line 2603
+Line 2771
 Line 2603
 Line 2771
  # assigned to an unknown key, Set-Up may be entered by pressing
  # [F3] as the first key after power up, regardless of keyboard type.
  # (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
  vt520|DEC VT520,
          am, mir, xenl, xon,
          cols#80, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
          clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
          dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
          if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
          is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
          kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
          kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
          kslt=\E[4~,
          pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
          rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
          ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
          rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
          rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
          sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
          smso=\E[7m, smul=\E[4m,
  # (vt525: I added <rmam>/<smam> based on the init string;
  # removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
  vt525|DEC VT525,
          am, mir, xenl, xon,
          cols#80, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
          clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
          dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
          if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
          is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
          kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
          kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
          kslt=\E[4~,
          pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
          rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
          ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
          rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
          rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>,
          sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
          smso=\E[7m, smul=\E[4m,
  #### VT100 emulations
  #
-Line 2662
+Line 2830
 Line 2662
 Line 2830
  # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
  # to telnetd.   Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
  # that this works best with a stock vt100 entry.
  dec-vt100|EWAN telnet's vt100 emulation,
          use=vt100,
  # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
  dec-vt220|DOS tnvt200 terminal emulator,
          am@, use=vt220,
  # Zstem340 is an (IMHO) excellent VT emulator for PC's.  I recommend it to
  # anyone who needs PC VT340 emulation. (or anything below that level, for
-Line 2676
+Line 2844
 Line 2676
 Line 2844
  # I can send the address if requested.
  # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
  # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
  z340|zstem vt340 terminal emulator 132col 42line,
          lines#42,
          is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
          rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
          use=vt320-w,
  z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
          am@,
          is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
          rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
          use=z340,
  # CRT is shareware.  It implements some xterm features, including mouse.
  crt|crt-vt220|CRT 2.3 emulating VT220,
          bce, msgr,
          ncv@,
          hts=\EH, use=vt100+enq, use=vt220, use=ecma+color,
  # PuTTY 0.55 (released 3 August 2004)
-Line 2807
+Line 2975
 Line 2807
 Line 2975
  # "resize -s"), though it does not pass SIGWINCH to the application if the
  # user resizes the window with the mouse.
  teraterm2.3|Tera Term Pro,
          km, xon@,
          ncv#43, vt@,
          acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
          blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
          cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
          flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
          il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
          kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
          kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
          kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
          kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
          kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
          kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
          rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m,
          smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq,
          use=klone+color, use=vt100,
-Line 2857
+Line 3025
 Line 2857
 Line 3025
  #    but that is not unusual for vt100 "emulators".
  # b) Does not implement vt100 keypad
  # c) Recognizes a subset of vt52 controls.
  ms-vt100|MS telnet imitating dec vt100,
          lines#25,
          acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
          ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@,
          kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100,
-Line 2934
+Line 3102
 Line 2934
 Line 3102
  # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
  # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
  # as these seem not to work -- esr)
  x10term|vs100-x10|xterm terminal emulator (X10 window system),
          OTbs, am, km, mir, msgr, xenl, xon,
          cols#80, it#8, lines#65,
          bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
          il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
          kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
          rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
          smso=\E[7m, smul=\E[4m,
  # Compatible with the R5 xterm
  # (from the XFree86 3.2 distribution, <blink=@> removed)
  # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
  # corrected typos in rs2 string - TD
  # added u6-u9 -TD
  xterm-r5|xterm R5 version,
          OTbs, am, km, msgr, xenl,
          cols#80, it#8, lines#24,
          bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
          il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=\177, kcub1=\EOD,
          kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
          kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
          kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
          kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
          kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
          kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
          rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
          rmul=\E[m,
          rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
          sc=\E7,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
          sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g, use=vt100+enq,
  # Compatible with the R6 xterm
  # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
  # added khome/kend, hts based on the R6 xterm code - TD
  # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
  # for compatibility with other emulators).
  xterm-r6|xterm-old|xterm X11R6 version,
          OTbs, am, km, mir, msgr, xenl,
          cols#80, it#8, lines#24,
          acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
          il1=\E[L, ind=^J,
          is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=\177,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
          kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
          kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
          kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
          kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
          kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
          kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
          rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
          rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
          sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
          smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          use=vt100+enq,
  # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
  # The name has been changed and some aliases have been removed.
  xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
          OTbs, am, bce, km, mir, msgr, xenl,
          cols#80, it#8, lines#24, ncv@,
          acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
          flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
          ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
          il1=\E[L, ind=^J,
          is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
          kbeg=\EOE, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
          kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~,
          kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
          kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
          kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
          kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
          kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
          kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
          memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
          rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
          rmso=\E[27m, rmul=\E[24m, rs1=^O,
          rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7,
          setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
          setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
          smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq,
          use=ecma+color, use=vt220+keypad,
  # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
  # codes for F1-F4 except while in VT220 mode.
  xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32,
  # This version was released in XFree86 3.3.3 (November 1998).
  # Besides providing printer support, it exploits a new feature that allows
  # xterm to use terminfo-based descriptions with the titeInhibit resource.
  # -- the distribution contained incorrect khome/kend values -TD
  xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
          mc5i,
          blink=\E[5m, ich1@, invis=\E[8m,
          is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
          mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
          rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          smcup=\E[?1048h\E[?1047h, use=xterm-xf86-v33,
  # This version was released in XFree86 4.0.
  xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
          npc,
          kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
          kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
          ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
          kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
          kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
          kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
          kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
          kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
          kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
          kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
          kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
          kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
          kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
          kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
          smcup=\E[?1049h, use=xterm-xf86-v333,
  # This version was released in XFree86 4.3.
  xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System),
-Line 3099
+Line 3267
 Line 3099
 Line 3267
  # This version reflects the current xterm features.
  xterm-new|modern xterm terminal emulator,
          npc,
          indn=\E[%p1%dS, kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H,
          kIC=\E[2;2~, kNXT=\E[6;2~, kPRV=\E[5;2~, kb2=\EOE,
          kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
-Line 3200
+Line 3368
 Line 3200
 Line 3368
          kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
          kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR,
          kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~,
          kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~,
          kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R,
          kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~,
          kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~,
          kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P,
          kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S,
          kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~,
-Line 3272
+Line 3440
 Line 3272
 Line 3440
  # This chunk is used for building the VT220/Sun/PC keyboard variants.
  xterm-basic|modern xterm terminal emulator - common,
          OTbs, am, bce, km, mc5i, mir, msgr, xenl, AX,
          colors#8, cols#80, it#8, lines#24, pairs#64,
          acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
          flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
          ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
          ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, kbs=\177,
          kmous=\E[M, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, meml=\El,
          memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
          rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, rmir=\E[4l,
          rmkx=\E[?1l\E>, rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m,
          rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7,
          setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
          setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
          setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
          sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
          sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h,
          smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m,
-Line 3299
+Line 3467
 Line 3299
 Line 3467
  # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
  # In retrospect, something like xterm-r6 was intended here -TD
  xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
          rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33,
  # 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
  # If configured to support 88- or 256-colors (which is fairly common in 2009),
  # xterm also recognizes the control sequences for initc -TD
  xterm-16color|xterm with 16 colors like aixterm,
          ccc,
          initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
          use=ibm+16color, use=xterm-new,
-Line 3313
+Line 3481
 Line 3313
 Line 3481
  # 256-colors is a compile-time feature of XFree86 xterm beginning with
  # patch #111 (1999/7/10) -TD
  xterm+256color|xterm 256-color feature,
          ccc,
          colors#256, pairs#32767,
          initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
          setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m,
          setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m,
          setb@, setf@,
-Line 3342
+Line 3510
 Line 3342
 Line 3510
  # These variants of XFree86 3.9.16 xterm are built as a configure option.
  xterm-256color|xterm with 256 colors,
          use=xterm+256color, use=xterm-new,
  xterm-88color|xterm with 88 colors,
          use=xterm+88color, use=xterm-256color,
  # These two are used to demonstrate the any-event mouse support, i.e., by
-Line 3362
+Line 3530
 Line 3362
 Line 3530
  #       SS3     \E O    \217
  #       CSI     \E [    \233
  #
  xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
          OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX,
          colors#8, cols#80, it#8, lines#24, pairs#64,
          acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
          civis=\233?25l, clear=\233H\2332J,
          cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr,
          cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J,
          cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
          cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h,
          dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
          ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
          flash=\233?5h$<100/>\233?5l, home=\233H,
          hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@,
          il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m,
          is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
          ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=\177,
          kc1=\217q, kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B,
          kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
          kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
          kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
          kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
          kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
          kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
          kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
          knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
          meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
          ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l,
          rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
          rs1=\Ec,
          rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8,
          sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
          setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
          setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
          sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
          sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h,
          smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=,
-Line 3403
+Line 3571
 Line 3403
 Line 3571
          u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd,
  xterm-hp|xterm with hpterm function keys,
          kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
          kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
          kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
          knp=\ES, kpp=\ET, use=xterm-basic,
  xterm-sco|xterm with SCO function keys,
          kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
-Line 3431
+Line 3599
 Line 3431
 Line 3599
  #         12-fkey keyboard can support vt220's 20-fkeys.
  #       + maps numeric keypad "+" to ",".
  #       + uses DEC-style control sequences for the application keypad.
  #
  xterm-vt220|xterm emulating vt220,
          kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
          kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
          kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
          kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
          khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
-Line 3443
+Line 3611
 Line 3443
 Line 3611
          use=vt220+keypad,
  xterm-vt52|xterm emulating dec vt52,
          cols#80, it#8, lines#24,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
          home=\EH, ht=^I, ind=^J, kbs=\177, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
  xterm-noapp|xterm with cursor keys in normal mode,
          rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp,
          use=xterm,
  xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
          lines#24, use=xterm-old,
  # This is xterm for ncurses.
  xterm|xterm terminal emulator (X Window System),
          use=xterm-new,
  # These entries allow access to the X titlebar and icon name as a status line.
  # Note that twm (and possibly window managers descended from it such as tvtwm,
  # ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
  # with it.
  xterm+sl|access X title line and icon name,
          hs,
          wsl#40,
          dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
  xterm+sl-twm|access X title line (pacify twm-descended window managers),
          hs,
          wsl#40,
          dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
  #
  # The following xterm variants don't depend on your base version
  #
  # xterm with bold instead of underline
  xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
          smso=\E[7m, smul=\E[1m, use=xterm-old,
  # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
  # (kterm should not invoke DEC Graphics as the alternate character set
-Line 3486
+Line 3654
 Line 3486
 Line 3654
  # (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics
  #  -- MATSUMOTO Shoji)
  # kterm implements acsc via built-in table of X Drawable's
  kterm|kterm kanji terminal emulator (X window system),
          eslok, hs,
          ncv@,
          acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~,
          csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F,
          kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
          sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h,
          tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color,
  kterm-color|kterm-co|kterm with ANSI colors,
          ncv@, use=kterm, use=ecma+color,
  # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
  xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
          ich@, ich1@, use=xterm,
  # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
  xterm1|xterm terminal emulator ignoring the alternate screen buffer,
          rmcup@, smcup@, use=xterm,
  # This describes the capabilities of color_xterm, an xterm variant from
  # before ECMA-64 color support was folded into the main-line xterm release.
-Line 3510
+Line 3678
 Line 3510
 Line 3678
  # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
  # The README's with the distribution also say that it supports SGR 21, 24, 25
  # and 27, but they are not present in the terminfo or termcap.
  color_xterm|cx|cx100|color_xterm color terminal emulator for X,
          OTbs, am, km, mir, msgr, xenl,
          cols#80, it#8, lines#65, ncv@,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
          ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
          is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=\177, kcub1=\EOD,
          kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~,
          kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
          kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
          kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
          kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
          rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
          rmso=\E[27m, rmul=\E[24m,
          rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
          sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
          sgr0=\E[0m\017, smacs=^N, smam=\E[?7h,
          smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
          smul=\E[4m, use=ecma+color, use=vt220+keypad,
  # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
-Line 3547
+Line 3715
 Line 3547
 Line 3715
  # csw (2002-05-15): make xterm-color primary instead of nxterm, to
  #   match XFree86's xterm.terminfo usage and prevent circular links
  xterm-color|nxterm|generic color xterm,
          ncv@,
          op=\E[m, use=xterm-r6, use=klone+color,
  # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
  gnome-rh62|Gnome terminal,
          bce,
          kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
          use=xterm-color,
  # GNOME Terminal 1.4.0.4 (Redhat 7.2)
  #
-Line 3687
+Line 3855
 Line 3687
 Line 3855
  # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
  # or not is debatable).
  kvt|KDE terminal,
          bce, km@,
          kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
  # Konsole 1.0.1
  # (formerly known as kvt)
-Line 3844
+Line 4012
 Line 3844
 Line 4012
          kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A,
          kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A,
+ mlterm-256color|mlterm 3.0 with xterm 256-colors,
+         use=xterm+256color, use=rxvt,
  # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
  # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
  # Notes:
-Line 3865
+Line 4036
 Line 3865
 Line 4036
  #
  # removed dch/dch1 because they are inconsistent with bce/ech -TD
  # remove km as per tack test -TD
  rxvt-basic|rxvt terminal base (X Window System),
          OTbs, am, bce, eo, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
          enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I,
          hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
-Line 3882
+Line 4053
 Line 3882
 Line 4053
          kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
          rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m,
          rmul=\E[24m,
          rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
          rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
          s0ds=\E(B, s1ds=\E(0, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
-Line 3984
+Line 4155
 Line 3984
 Line 4155
          kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^,
          kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@,
          kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
-         kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
+         kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~,
-         kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, kDN=\E[b, kDN5=\EOb,
+         kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@,
-         kEND5=\E[8\^, kEND6=\E[8@, kHOM5=\E[7\^, kHOM6=\E[7@,
+         kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@,
-         kIC5=\E[2\^, kIC6=\E[2@, kLFT5=\EOd, kNXT5=\E[6\^,
+         kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@,
-         kNXT6=\E[6@, kPRV5=\E[5\^, kPRV6=\E[5@, kRIT5=\EOc,
+         kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^,
-         kUP=\E[a, kUP5=\EOa,
+         kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa,
  rxvt|rxvt terminal emulator (X Window System),
          ncv@,
          hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017,
          vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color,
  rxvt-color|rxvt terminal emulator (X Window System),
-Line 4015
+Line 4186
 Line 4015
 Line 4186
  rxvt-16color|xterm with 16 colors like aixterm,
          ncv#32, use=ibm+16color, use=rxvt,
- # mrxvt 0.5.3
+ # mrxvt 0.5.4
  #
  # mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which
  # makes its function-keys different from other flavors of rxvt -TD
  mrxvt|multitabbed rxvt,
-         use=xterm+pcc2, use=xterm+r6f2, use=rxvt,
+         kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B,
+         kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~,
+         kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~,
+         kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~,
+         kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~,
+         kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys,
+         use=rxvt,
+ mrxvt-256color|multitabbed rxvt with 256 colors,
+         use=xterm+256color, use=mrxvt,
  # From: Michael Jennings <mej@valinux.com>
  #
  # Eterm 0.9.3
-Line 4032
+Line 4212
 Line 4032
 Line 4212
  # but does otherwise follow the rxvt+pcfkeys model -TD
  # remove nonworking flash -TD
  # remove km as per tack test -TD
  Eterm|Eterm-color|Eterm with xterm-style color support (X Window System),
          am, bce, bw, eo, mc5i, mir, msgr, xenl, xon,
          btns#5, cols#80, it#8, lines#24, lm#0, ncv@,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
          home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
          ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
          is1=\E[?47l\E>\E[?1l,
-Line 4052
+Line 4232
 Line 4052
 Line 4232
          mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
          rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=,
          rmso=\E[27m, rmul=\E[24m,
          rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
          rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h,
          sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
          smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys,
          use=ecma+color,
  Eterm-256color|Eterm with xterm 256-colors,
          use=xterm+256color, use=Eterm,
-Line 4082
+Line 4262
 Line 4082
 Line 4262
  # These (xtermc and xtermm) are distributed with Solaris.  They refer to a
  # variant of xterm which is apparently no longer supported, but are interesting
  # because they illustrate SVr4 curses mouse controls - T.Dickey
  xtermm|xterm terminal emulator (monocrome),
          OTbs, am, km, mir, msgr, xenl,
          btns#3, cols#80, it#8, lines#24,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
          home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
          il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
          kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy,
          kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU,
          kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_,
          knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM,
          rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m,
          rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
          smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys,
  xtermc|xterm terminal emulator (color),
          colors#8, ncv#7, pairs#64,
          op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
          setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
          setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
          use=xtermm,
  # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
  # Here's a termcap entry I've been using for xterm_color, which comes
  # with BSD/OS 2.0, and the X11R6 contrib tape too I think.  Besides the
  # color stuff, I also have a status line defined as the window manager
  # title bar. [I have translated it to terminfo -- ESR]
  xterm-pcolor|xterm with color used for highlights and status line,
          bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
          smul=\E[4m\E[42m, use=xterm+sl, use=xterm-r6,
  # HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in
  # from BSD termcap.  (hpterm:  added empty <acsc>, we have no idea what ACS
  # chars look like --esr)
  hpterm|X-hpterm|hp X11 terminal emulator,
          am, da, db, mir, xhp,
          cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
          acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
          cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
          cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
          hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
          kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
          kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
          khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
          knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
          memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
          pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
          pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
          pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
          rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
          rmul=\E&d@,
          sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
          sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
          smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
  # HPUX 11 provides a color version.
  hpterm-color|HP X11 terminal emulator with color,
          ccc,
-Line 4157
+Line 4337
 Line 4157
 Line 4337
  # via the X resource setting "xterm*sunFunctionKeys:true"
  # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
  # The <kf13>...<kf20> keys are L3-L10.  We don't set <kf16=\E[197z>
  # because we want it to be seen as <kcpy>.
  # The <kf31>...<kf45> keys are R1-R15.  We treat some of these in accordance
  # with their Sun keyboard labels instead.
  # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
  xterm-sun|xterm with sunFunctionKeys true,
          kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB,
          kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z,
          kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z,
-Line 4175
+Line 4355
 Line 4175
 Line 4355
          kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z,
          kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z,
          use=xterm-basic,
  xterms-sun|small (80x24) xterm with sunFunctionKeys true,
          cols#80, lines#24, use=xterm-sun,
  # This is for the extensible terminal emulator on the X11R6 contrib tape.
  # It corresponds to emu's internal emulation:
-Line 4184
+Line 4364
 Line 4184
 Line 4364
  # emu's default sets TERM to "xterm", but that doesn't work well -TD
  # fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD
  # fixes: add civis, cnorm, sgr -TD
  emu|emu native mode,
          am, bce, mir, msgr, xon,
          colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
          acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
          bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;,
          cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;,
          cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\ED,
-Line 4203
+Line 4383
 Line 4203
 Line 4383
          kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind,
          kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel,
          op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES,
          rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
          setaf=\Er%i%p1%d;,
          sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;,
          sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej,
-Line 4362
+Line 4542
 Line 4362
 Line 4542
  #### MGR
  #
  # MGR is a Bell Labs window system lighter-weight than X.
  # These entries describe MGR's xterm-equivalent.
  # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
  #
  mgr|Bellcore MGR (non X) window system terminal emulation,
          am, km,
          bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
          csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
          cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
          dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
          dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
          ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
          il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
          rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
          smul=\E4n,
  mgr-sun|Mgr window with Sun keyboard,
          ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
          kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
          kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
          kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
          kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
          kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
          kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr,
  mgr-linux|Mgr window with Linux keyboard,
          ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
          kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
          kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
          kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
          khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr,
  ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
  #
  # Columbus UNIX virtual terminal. This terminal also appears in
  # UNIX 4.0 and successors as line discipline 1 (?), but is
  # undocumented and does not really work quite right.
  cbunix|cb unix virtual terminal,
          OTbs, am, da, db,
          cols#80, lines#24, lm#0,
          bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
          el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
          smso=\Ea^D, smul=\Ea^A,
  # (vremote: removed obsolete ":nl@:" -- esr)
  vremote|virtual remote terminal,
          am@,
          cols#79, use=cbunix,
  pty|4bsd pseudo teletype,
          cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
          smso=\Ea$, smul=\Ea!, use=cbunix,
  # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
  eterm|gnu emacs term.el terminal emulation,
          am, mir, xenl,
          cols#80, lines#24,
          bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
          il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
          rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
          smul=\E[4m,
  # The codes supported by the term.el terminal emulation in GNU Emacs 22.2
  eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96,
-Line 4451
+Line 4631
 Line 4451
 Line 4631
          sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
          u6=\E[%i%d;%dR, u7=\E[6n,
  # Entries for use by the `screen' program by Juergen Weigert,
  # Michael Schroeder, Oliver Laumann.  The screen and
  # screen-w entries came with version 3.7.1.  The screen2 and screen3 entries
  # come from University of Wisconsin and may be older.
-Line 4494
+Line 4674
 Line 4494
 Line 4674
  # The bce and status-line entries are from screen 3.9.13 (and require some
  # changes to .screenrc).
  screen-bce|VT 100/ANSI X3.64 virtual terminal with bce,
-         bce, use=screen,
+         bce,
+         ech@, use=screen,
  screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line,
          dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen,
-Line 4593
+Line 4774
 Line 4593
 Line 4774
          use=rxvt+pcfkeys, use=vt220+keypad, use=screen,
  screen.Eterm|screen in Eterm,
          use=screen+fkeys, use=Eterm,
+ screen.mrxvt|screen in mrxvt,
+         use=screen+fkeys, use=mrxvt,
+ screen.gnome|screen in GNOME Terminal,
+         use=screen+fkeys, use=gnome,
+ screen.konsole|screen in KDE console window,
+         use=screen+fkeys, use=konsole,
  # fix the backspace key
  screen.linux|screen in linux console,
          bw,
-Line 4600
+Line 4787
 Line 4600
 Line 4787
  screen.mlterm|screen in mlterm,
          use=screen+fkeys, use=mlterm,
- screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
+ # The default "screen" entry is reasonably portable, but not optimal for the
-         cols#132, use=screen,
+ # most widely-used terminal emulators.  The "bce" capability is supported in
+ # screen since 3.9.13, and when used, will require fewer characters to be sent
+ # to the terminal for updates.
+ #
+ # If you are using only terminals which support bce, then you can use this
+ # feature in your screen configuration.
+ #
+ # Adding these lines to your ".screenrc" file will allow using these customized
+ # entries:
+ #       term screen-bce
+ #       bce on
+ #       defbce on
+ screen-bce.xterm-new|screen optimized for modern xterm,
+         bce,
+         ech@, use=screen.xterm-new,
+ screen-bce.rxvt|screen optimized for rxvt,
+         bce,
+         ech@, use=screen.rxvt,
+ screen-bce.Eterm|screen optimized for Eterm,
+         bce,
+         ech@, use=screen.Eterm,
+ screen-bce.mrxvt|screen optimized for mrxvt,
+         bce,
+         ech@, use=screen.mrxvt,
+ screen-bce.gnome|screen optimized for GNOME-Terminal,
+         bce,
+         ech@, use=screen.gnome,
+ screen-bce.konsole|screen optimized for KDE console window,
+         bce,
+         ech@, use=screen.konsole,
+ screen-bce.linux|screen optimized for linux console,
+         bce,
+         ech@, use=screen.linux,
+ screen-bce.mlterm|screen optimized for mlterm,
+         bce,
+         ech@, use=screen.mlterm,
- screen2|old VT 100/ANSI X3.64 virtual terminal,
+ screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
-         cols#80, it#8, lines#24,
+         cols#132, use=screen,
-         cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
-         cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
+ screen2|old VT 100/ANSI X3.64 virtual terminal,
-         cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
+         cols#80, it#8, lines#24,
-         dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
+         cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
-         el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
+         cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
-         il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
+         cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
-         kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
+         dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
-         kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
+         el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
-         nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
+         il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
-         rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
+         kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
-         smso=\E[3m, smul=\E[4m, tbc=\E[3g,
+         kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
+         nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
+         rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
+         smso=\E[3m, smul=\E[4m, tbc=\E[3g,
  # (screen3: removed unknown ":xv:LP:G0:" -- esr)
  screen3|older VT 100/ANSI X3.64 virtual terminal,
          km, mir, msgr,
          cols#80, it#8, lines#24,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
          cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
          il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
          kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
          kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
          rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
          sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
          smul=\E[4m, tbc=\E[3g,
  # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
  # NCSA telnet is one of the most used telnet clients for the Macintosh.  It has
-Line 4667
+Line 4892
 Line 4667
 Line 4892
  # The status-line manipulation is a mapping of the xterm-compatible control
  # sequences for setting the window-title.  So you must use tsl and fsl in
  # pairs, since the latter ends the string that is loaded to the window-title.
  ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
          am, hs, km, mir, msgr, xenl,
          acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
          flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
          ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
          il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
          is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
          kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
          kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
          kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
          khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
          rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
          rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
          rmso=\E[27m, rmul=\E[24m,
          rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
          sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7,
          smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
          u8=\E[?62;1;6c, use=ansi+enq,
  ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
          use=ncsa-m, use=klone+color,
  ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
          hs@,
          dsl@, fsl@, tsl@, use=ncsa,
  ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
          hs@,
          dsl@, fsl@, tsl@, use=ncsa-m,
  # alternate -TD:
  # The documented function-key mapping refers to the Apple Extended Keyboard
  # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6).  We use the VT220-style
  # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
  # some keyboards and many applications require these as F1-F4.
  #
  ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
          kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
          kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
          kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
          kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
          kf8=\E[19~, kf9=\E[20~, use=ncsa,
  #### Pilot Pro Palm-Top
  #
  # Termcap for Top Gun Telnet and SSH on the Palm Pilot.
  # http://www.ai/~iang/TGssh/
  pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
          OTbs, am, xenl,
          cols#39, lines#16,
          bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
          cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
          ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
          rmso=\EB, smso=\Eb,
  # From: Federico Bianchi <bianchi@www.arte.unipi.it>
  # These entries are for the Embeddable Linux Kernel System (ELKS)
-Line 4774
+Line 4999
 Line 4774
 Line 4999
  #
  # This is from the OSF/1 Release 1.0 termcap file
  pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
          am, xon,
          cols#80, lines#25,
          bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
          el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
          nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
  #### Sun consoles
  #
  # :is1: resets scrolling region in case a previous user had used "tset vt100"
  oldsun|Sun Microsystems Workstation console,
          OTbs, am, km, mir, msgr,
          cols#80, it#8, lines#34,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
          dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
          ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
          is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
          rmso=\E[m, sgr0=\E[m, smso=\E[7m,
  # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
  # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
  # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
  sun-il|Sun Microsystems console with working insert-line,
          am, km, msgr,
          cols#80, lines#34,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
          dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
          ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
          kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
          kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
          kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
          kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
          knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
          kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
          sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, smso=\E[7m,
          u8=\E[1t, u9=\E[11t,
  # On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il>
  # flake out on the last line.  Unfortunately, without them the terminal has no
  # way to scroll.
  sun-cgsix|sun-ss5|Sun SparcStation 5 console,
          il@, il1@, use=sun-il,
  # If you are using an SS5, change the sun definition to use sun-ss5.
  sun|sun1|sun2|Sun Microsystems Inc. workstation console,
          use=sun-il,
  # From: <john@ucbrenoir>  Tue Sep 24 13:14:44 1985
  sun-s|Sun Microsystems Workstation window with status line,
          hs,
          dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
  sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
          hs,
          dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
  sun-48|Sun 48-line window,
          cols#80, lines#48, use=sun,
  sun-34|Sun 34-line window,
          cols#80, lines#34, use=sun,
  sun-24|Sun 24-line window,
          cols#80, lines#24, use=sun,
  sun-17|Sun 17-line window,
          cols#80, lines#17, use=sun,
  sun-12|Sun 12-line window,
          cols#80, lines#12, use=sun,
  sun-1|Sun 1-line window for sysline,
          eslok, hs,
          cols#80, lines#1,
          dsl=^L, fsl=\E[K, tsl=^M, use=sun,
  sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
          ich1@, rmir@, smir@, use=sun,
  sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
          lines#35,
          rmcup=\E[>4h, smcup=\E[>4l, use=sun,
  sun-type4|Sun Workstation console with type 4 keyboard,
          kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z,
          kcuu1=\E[215z, use=sun-il,
-Line 4891
+Line 5116
 Line 4891
 Line 5116
  # (wsiris: this had extension capabilities
  #       :HS=\E7F2:HE=\E7F7:\
  #       :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
  # See the note on Iris extensions near the end of this file.
  # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
  # <flash> from BRL -- esr)
  wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
          OTbs, OTnc, OTpt, am,
          OTkn#3, cols#80, it#8, lines#40,
          OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
          cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
          cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
          flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
          ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
          kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
          rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
          smul=\E7R2\E9P,
  #### NeWS consoles
  #
-Line 4916
+Line 5141
 Line 4916
 Line 5141
  # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
  # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
  psterm|psterm-basic|NeWS psterm-80x34,
          OTbs, am, hs, km, ul,
          cols#80, it#8, lines#34,
          blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
          cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
          dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
          home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
          ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
          sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
          tsl=\EOl,
  psterm-96x48|NeWS psterm 96x48,
          cols#96, lines#48, use=psterm,
  psterm-90x28|NeWS psterm 90x28,
          cols#90, lines#28, use=psterm,
  psterm-80x24|NeWS psterm 80x24,
          cols#80, lines#24, use=psterm,
  # This is a faster termcap for psterm.  Warning:  if you use this termcap,
  # some control characters you type will do strange things to the screen.
  # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
  psterm-fast|NeWS psterm fast version (flaky ctrl chars),
          OTbs, am, hs, km, ul,
          cols#80, it#8, lines#34,
          blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
          cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
          dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
          il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
          rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
          smso=^Oo, smul=^Ou, tsl=^Ol,
  #### NeXT consoles
  #
-Line 4953
+Line 5178
 Line 4953
 Line 5178
  #
  # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
  next|NeXT console,
          am, xt,
          cols#80, it#8, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
          ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
          rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
  nextshell|NeXT Shell application,
          am,
          cols#80,
          bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
          kcud1=^J, nel=^M^J,
  #### Sony NEWS workstations
  #
  # (news-unk: this had :KB=news: -- esr)
  news-unk|SONY NEWS vt100 emulator common entry,
          OTbs, OTpt, am, xenl,
          cols#80,
          OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
          cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
          ed=\E[J, el=\E[K, home=\E[H, ht=^I,
          if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
          is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
          kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
          kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
          kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
          rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
          sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
  #
  # (news-29: this had :TY=ascii: --esr)
  news-29,
          lines#29, use=news-unk,
  # (news-29-euc: this had :TY=euc: --esr)
  news-29-euc,
          use=news-29,
  # (news-29-sjis: this had :TY=sjis: --esr)
  news-29-sjis,
          use=news-29,
  #
  # (news-33: this had :TY=ascii: --esr)
  news-33,
          lines#33, use=news-unk,
  # (news-33-euc: this had :TY=euc: --esr)
  news-33-euc,
          use=news-33,
  # (news-33-sjis: this had :TY=sjis: --esr)
  news-33-sjis,
          use=news-33,
  #
  # (news-42: this had :TY=ascii: --esr)
  news-42,
          lines#42, use=news-unk,
  # (news-42-euc: this had :TY=euc: --esr)
  news-42-euc,
          use=news-42,
  # (news-42-sjis: this had :TY=sjis: --esr)
  news-42-sjis,
          use=news-42,
  #
  #       NEWS-OS old termcap entry
  #
  # (news-old-unk: this had :KB=news:TY=sjis: --esr)
  news-old-unk|SONY NEWS vt100 emulator common entry,
          OTbs, OTpt, am, xenl,
          cols#80, vt#3,
          OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
          cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
          home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
          kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
          rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
  #
  # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
  nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
          OTbs,
          lines#40,
          is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
          use=news-old-unk,
  #
  # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
  nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
          lines#42,
          is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8,
          use=news-old-unk,
  #
  # (nwp-512-o: this had :KB=nwp410:DE=^H:  I interpret the latter as <OTbs>. --esr)
  nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
          OTbs,
          lines#40,
          is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8,
          use=news-old-unk,
  #
  # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
  nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
          OTbs,
          lines#31,
          is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
          use=news-old-unk,
  #
  # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
  # also the alias vt100-bm.
  nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
          OTbs,
          lines#33,
          is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8,
          use=news-old-unk,
  #
  # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
  nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
          OTbs,
          lines#31,
          is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8,
          use=news-old-unk,
  #
  # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
  news28|sony vt100 emulator 28 lines,
          OTbs,
          lines#28,
          is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8,
          use=news-old-unk,
  #
  # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
  news29|news28-a|sony vt100 emulator 29 lines,
          lines#29,
          is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8,
          use=news-old-unk,
  #
  # (news511: this had :TY=sjis: --esr)
  nwp511|nwp-511|nwp-511 vt100,
          OTbs, OTpt, am, xenl,
          cols#80, lines#24,
          clear=\E[;H\E[2J$<20/>, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
          ed=\E[J$<30/>, el=\E[K$<3/>,
          flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
          il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
          kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
          ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
          rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
          smso=\E[7m$<2/>, smul=\E[4m$<2/>,
  # (news517: this had :TY=sjis:. --esr)
  nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
          eslok, hs,
          cols#80, lines#30,
          OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
          is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
          tsl=\E[1$}\E[;%df, use=vt200,
  # (news517-w: this had :TY=sjis:. --esr)
  nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
          eslok, hs,
          cols#132, lines#50,
          OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
          is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
          rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
          tsl=\E[1$}\E[;%df, use=vt200,
  #### Common Desktop Environment
  #
  # This ships with Sun's CDE in Solaris 2.5
  # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
  dtterm|CDE desktop terminal,
          am, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, lm#0, ncv@,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
          dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
          enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
          ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
          ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
          kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
          kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
          kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
          kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
          kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
          kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
          kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
          rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
          sc=\E7,
          sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
          smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color,
  #### Non-Unix Consoles
  #
-Line 5168
+Line 5393
 Line 5168
 Line 5393
  # names longer than 14 characters, the nominal maximum).
  #
  # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
  ansi-emx|ANSI.SYS color,
          am, bce, eo, mir, msgr, xon,
          colors#8, cols#80, it#8, lines#25, pairs#64,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
          cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
          dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
          home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
          kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J,
          rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m,
          rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec,
-Line 5184
+Line 5409
 Line 5184
 Line 5409
          smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c,
          u9=\E[c, use=emx-base,
  # nice colors for Emacs (white on blue, mode line white on cyan)
  ansi-color-2-emx|ANSI.SYS color 2,
          clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m,
          rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec,
          setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m,
          smul=\E[1;36;44m, use=ansi-emx,
  # nice colors for Emacs (white on black, mode line black on cyan)
  ansi-color-3-emx|ANSI.SYS color 3,
          clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m,
          rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec,
          setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m,
          smul=\E[0;36;40m, use=ansi-emx,
  mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
          am,
          cols#80, it#8, lines#24,
          clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
          ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
          kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
          kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
          kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
          sgr0=\E[0m,
  # Use this for cygwin32 (tested with beta 19.1)
  # underline is colored bright magenta
  # shifted kf1-kf12 are kf11-kf22
  cygwinB19|ansi emulation for cygwin32,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
          kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
          kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
          kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
          kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
          khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
          use=ansi.sys,
  # Use this for cygwin (tested with version 1.1.0).
  # I've combined pcansi and linux.  Some values of course were different and
-Line 5270
+Line 5495
 Line 5270
 Line 5495
  # 2005/11/12 -TD
  #       Remove cbt since it does not work in current cygwin
  #       Add 'mir' and 'in' flags based on tack
  cygwin|ansi emulation for Cygwin,
          am, hs, mir, msgr, xon,
          colors#8, it#8, pairs#64,
          acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
          bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD,
          cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
-Line 5317
+Line 5542
 Line 5317
 Line 5542
          ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
          il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$,
          kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A,
          kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
          kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
          kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~,
          kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~,
          kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
          knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m,
          rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l,
          rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7,
          setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
          sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
          sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq,
-Line 5532
+Line 5757
 Line 5532
 Line 5757
  # but the termcap entry is actually broken and unusable as given; the :do:
  # capability is misspelled "d".
  #
  # To use this, you need to a bunch of environment variables:
  #
  # SET _POSIX_TERM=on
  # SET TERM=ansi
-Line 5544
+Line 5769
 Line 5544
 Line 5769
  # Important note: setting the TMP environment variable in POSIX style renders
  # it incompatible with a lot of other applications, including Visual C++. So
  # you should have a separate command window just for vi. All the other
  # variables may be permanently set in the Control Panel\System applet.
  #
  # You can find out more about the restrictions of this facility at
  # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
  #
  # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
  ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
          am, bw, msgr,
          cols#80, it#8, lines#25,
          bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
          home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
          kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
          ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
  # From: jew@venus.sunquest.com
  # Date: 19 Feb 93 23:41:07 GMT
  # Here's  a  combination of  ansi and  vt100 termcap
  # entries   that  works  nearly   perfectly  for  me
  # (Gateway 2000 Handbook and Microsoft Works 3.0):
  pcmw|PC running Microsoft Works,
          am, xenl,
          cols#80, it#8, lines#24, vt#3,
          bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
          clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
          cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
          cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
          ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
          rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
          ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
          tbc=\E[3g$<2/>,
  # From: Federico Bianchi
  # This is the entry for the OpenNT terminal.
-Line 5693
+Line 5918
 Line 5693
 Line 5918
  # Comparison with the k* capabilities makes it obvious that the c* things are
  # shift keys.  I have renamed them to keys 32 and up accordingly.  Also,
  # :sr: was given as a boolean-- esr)
  altos2|alt2|altos-2|altos II,
          cols#80, it#8, lines#24, xmc#0,
          clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M,
          ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
          if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
          is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
          kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
          kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
          kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
          kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
          kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
          kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
          nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
          smam=\E[?7h, smso=\E[7m, smul=\E[4m,
  # (altos3: had extension capabilities
  #       :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
  #       :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
-Line 5717
+Line 5942
 Line 5717
 Line 5942
  #       :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
  #       :HL=^AP\r:SP=\E[i:\
  #       :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
  altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
          blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2,
  altos4|alt4|altos-4|altos IV,
          use=wy50,
  # (altos7: had extension capabilities:
  #       :GG#0:GI=\EH8:GF=\EH7:\
  #       :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
-Line 5731
+Line 5956
 Line 5731
 Line 5956
  # shift keys.  I have renamed them to keys 32 and up accordingly.  I have
  # also made this entry relative to adm12 in order to give it an <sgr>. The
  # <invis> imported by use=adm+sgr may work, let me know. -- esr)
  altos7|alt7|altos VII,
          am, mir,
          cols#80, lines#24, xmc#0,
          acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
          clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
          ind=^J, invis=\EG1,
          is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
          kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
          kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
          kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
          kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
          kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
          kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
          kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
          knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
          rmir=\Er, smir=\Eq, use=adm+sgr,
  altos7pc|alt7pc|altos PC VII,
          kend=\ET, use=altos7,
  #### Hewlett-Packard (hp)
  #
  #       Hewlett-Packard
  #       8000 Foothills Blvd
  #       Roseville, CA 95747
  #       Vox: 1-(916)-785-4363   (Technical response line for VDTs)
  #            1-(800)-633-3600   (General customer support)
  #
  #
  # As of March 1998, HP no longer has any terminals in production.
  # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
  # supported (they still have parts). So are the 2392a and 2394a.
  # See the WORKSTATION CONSOLES section for the 700s.
  #
  # Generic HP terminal - this should (hopefully) work on any HP terminal.
  hpgeneric|hp|hewlett-packard generic terminal,
          OTbs, OTpt, am, da, db, mir, xhp,
          cols#80, lines#24, lm#0, vt#6,
          bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
          ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
          ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
          sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
          vpa=\E&a%p1%dY,
  hp110|hewlett-packard model 110 portable,
          lines#16, use=hpgeneric,
  hp+pfk+cr|hp function keys with CR,
          kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
          kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
  hp+pfk-cr|hp function keys w/o CR,
          kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
          kf8=\Ew,
  # The hp2621s use the same keys for the arrows and function keys,
  # but not separate escape sequences. These definitions allow the
  # user to use those keys as arrow keys rather than as function
  # keys.
  hp+pfk+arrows|hp alternate arrow definitions,
          kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
          kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
          kll=\Eq\r, kri=\Es\r,
  hp+arrows|hp arrow definitions,
          kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
          kind=\ES, kll=\EF, kri=\ET,
  # Generic stuff from the HP 262x series
  #
  hp262x|HP 262x terminals,
          xhp,
          blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
          invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
          kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
          krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
          sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
          sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
  # Note: no <home> on HPs since that homes to top of memory, not screen.
  # Due to severe 2621 braindamage, the only way to get the arrow keys to
  # transmit anything at all is to turn on the function key labels
  # with <smkx>, and even then the user has to hold down shift!
  # The default 2621 turns off the labels except when it has to to
  # enable the function keys. If your installation prefers labels
  # on all the time, or off all the time (at the "expense" of the
  # function keys), use 2621-nl or 2621-wl.
  #
  # Note: there are newer ROMs for 2621's that allow you to set
  # strap A so the regular arrow keys xmit \EA, etc, as with the
  # 2645. However, even with this strap set, the terminal stops
  # xmitting if you reset it, until you unset and reset the strap!
  # Since there is no way to set/unset the strap with an escape
  # sequence, we don't use it in the default.
  # If you like, you can use 2621-ba (brain-damaged arrow keys).
  hp2621-ba|2621 w/new rom and strap A set,
          rmkx@, smkx@, use=hp+arrows, use=hp2621,
  # hp2621 with function labels. Most of the time they are off,
  # but inside vi, the function key labels appear. You have to
  # hold down shift to get them to xmit.
  hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
          is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
  hp2621-fl|hp 2621,
          xhp@, xon,
          pb#19200,
          cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
          ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
          sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
          use=hp+pfk+cr, use=hpgeneric,
  # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
  hp2621p|hp 2621 with printer,
          mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
  hp2621p-a|hp2621p with fn as arrows,
          use=hp+pfk+arrows, use=hp2621p,
  # hp2621 with k45 keyboard
  hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
          kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
          khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621,
  # 2621 using all 48 lines of memory, only 24 visible at any time.
  hp2621-48|48 line 2621,
          lines#48,
          cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR,
          use=hp2621,
  # 2621 with no labels ever. Also prevents vi delays on escape.
  hp2621-nl|hp 2621 with no labels,
          kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@,
          use=hp2621-fl,
  # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
  # (wrong).
  #
  hp2621-nt|hp 2621 w/no tabs,
          ht@, use=hp2621,
  # Hp 2624 B with 4 or 10 pages of memory.
  #
  # Some assumptions are made with this entry. These settings are
  # NOT set up by the initialization strings.
  #
  # Port Configuration
  #       RecvPace=Xon/Xoff
  #       XmitPace=Xon/Xoff
  #       StripNulDel=Yes
  #
  # Terminal Configuration
  #       InhHndShk=Yes
  #       InhDC2=Yes
  #       XmitFnctn(A)=No
  #       InhEolWrp=No
  #
  # Note: the 2624 DOES have a true <home>, believe it or not!
  #
  # The 2624 has an "error line" to which messages can be sent.
  # This is CLOSE to what is expected for a "status line". However,
  # after a message is sent to the "error line", the next carriage
  # return is EATEN and the "error line" is turned back off again!
  # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
  #
  # This entry supports emacs (and any other program that uses raw
  # mode) at 4800 baud and less. I couldn't get the padding right
  # for 9600.
  #
  # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
  hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
          da, db,
          lm#96,
          flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F,
          use=hp+labels, use=scrhp,
  # This hp2626 entry does not use any of the fancy windowing stuff
  # of the 2626.
  #
  # Indeed, terminfo does not yet handle such stuff. Since changing
  # any window clears memory, it is probably not possible to use
  # this for screen opt.
  #
  # ed is incredibly slow most of the time - I am guessing at the
  # exact padding. Since the terminal uses xoff/xon this is intended
  # only for cost computation, so that the terminal will prefer el
  # or even dl1 which is probably faster!
  #
  # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
  # extra slow on the last line of the window.
  #
  # The padding probably should be changed.
  #
  hp2626|hp2626a|hp2626p|hp 2626,
          da, db,
          lm#0, pb#19200,
          ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
          is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk+cr,
          use=hp+labels, use=scrhp,
  # This entry is for sysline. It allocates a 23 line window with
  # a 115 line workspace for regular use, and a 1 line window for
  # the status line.
  #
  # This assumes port 2 is being used.
  # Turn off horizontal line, Create ws #1 with 115 lines,
  # Create ws #2 with 1 line, Create window #1 lines 1-23,
-Line 5945
+Line 6170
 Line 5945
 Line 6170
  # Note that this clears the tabs so it must be done by tset before
  # it sets the tabs.
  #
  hp2626-s|hp 2626 using only 23 lines,
          eslok, hs,
          lines#23,
          fsl=\E&d@\E&w7f2p1I\E&w4f1I,
          is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
          tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626,
  # Force terminal back to 24 lines after being 23.
  hp2626-ns|hp 2626 using all 24 lines,
          is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
          use=hp2626,
  # Various entries useful for small windows on 2626.
  hp2626-12|hewlett-packard 2626 12 lines,
          lines#12, use=hp2626,
  hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
          cols#40, lines#12, use=hp2626,
  hp2626-x40|hewlett-packard 2626 40 columns,
          cols#40, use=hp2626,
  hp2626-12-s|hewlett-packard 2626 11 lines plus status,
          lines#11, use=hp2626-s,
  #
  # hp2627 color tubes from University of Wisconsin
  #
  hp2627a-rev|hp 2627 with reverse video colors,
          cr=^M, cud1=^J, ht=^I, ind=^J,
          is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
          kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
          smul=\E&dD\E&v1S, use=hp2621-nl,
  hp2627a|hp 2627 color terminal with no labels,
          cr=^M, cud1=^J, ht=^I, ind=^J,
          is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
          kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
          rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
          use=hp2621-nl,
  hp2627c|hp 2627 color (cyan) terminal with no labels,
          cr=^M, cud1=^J, ht=^I, ind=^J,
          is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
          kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a,
  # hp2640a doesn't have the Y cursor addressing feature, and C is
  # memory relative instead of screen relative, as we need.
  #
  hp2640a|hp 2640a,
          cup@, rmkx@, smkx@, use=hp2645,
  hp2640b|hp2644a|hp 264x series,
          rmkx@, smkx@, use=hp2645,
  # (hp2641a: removed unknown :gu: -- esr)
  hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
          am, da, db, mir, xhp,
          cols#80, lines#24,
          bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
          ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
          if=/usr/share/tabset/std, il1=\EL, ind=^J,
          is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
          rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
          vpa=\E&a%p1%2dY,
  # This terminal should be used at 4800 baud or less. It needs padding for
  # plain characters at 9600, I guessed at an appropriate cr delay.  It really
  # wants ^E/^F handshaking, but that doesn't work well even if you write
  # software to support it.
  hp2645|hp45|HP 2645 series,
          pb#9600,
          blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
          ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
          kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
          rmkx=\E&s0A,
          sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
          sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric,
  # You should use this terminal at 4800 baud or less.
  hp2648|hp2648a|HP 2648a graphics terminal,
          clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
          dch1=\EP$<7>, ip=$<5>, use=hp2645,
  # The HP 150 terminal is a fairly vanilla HP terminal, with the
  # clreol standout problem. It also has graphics capabilities and
  # a touch screen, which we don't describe here.
  hp150|hewlett packard Model 150,
          OTbs, use=hp2622,
  # HP 2382a terminals, "the little ones." They don't have any
  # alternate character set support and sending out ^N/^O will
  # leave the screen blank.
  hp2382a|hp2382|hewlett packard 2382a,
          da, db,
          lh#1, lm#48,
          acsc@,
          pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
          rmacs@,
          sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
          sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp,
  hp2621-a|hp2621a-a|hp2621 with fn as arrows,
          use=hp+pfk+arrows, use=hp2621-fl,
  # newer hewlett packard terminals
  newhpkeyboard|generic entry for HP extended keyboard,
          kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
          kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
          kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
          use=hp+pfk-cr,
  newhp|generic entry for new hewlett packard terminals,
          am, bw, mir, xhp, xon,
          cols#80, lines#24, pb#4800,
          acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
          bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
          cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
          dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
          invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
          pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
          pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
          pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
          rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
          sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
          sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
          tbc=\E3, use=newhpkeyboard,
  memhp|memory relative addressing for new HP ttys,
          vt#6,
          clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
          cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
          home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
          mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
  scrhp|screen relative addressing for new HP ttys,
          clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
          cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
          cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
          home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
          mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
  # (hp+labels: added label values from a BRL termcap -- esr)
  hp+labels|"standard" label info for new HP ttys,
          lh#2, lw#8, nlab#8,
          lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
          pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
          rmln=\E&j@, smln=\E&jB,
  hp+printer|"standard" printer info for HP ttys,
          ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
  # The new hp2621b is kind of a cross between the old 2621 and the
  # new 262x series of machines. It has dip-switched options.
  # The firmware has a bug in it such that if you give it a null
  # length label, the following character is eaten!
  hp2621b|hp 2621b with old style keyboard,
          lh#1, lm#48, lw#8, nlab#8,
          kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
          kind=\ET, kll=\EF, kri=\ES,
          pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
          smln=\E&jB, use=hp2621,
  hp2621b-p|hp 2621b with printer,
          use=hp+printer, use=hp2621b,
  # hp2621b - new 2621b with new extended keyboard
  # these are closer to the new 26xx series than the other 2621b
  hp2621b-kx|hp 2621b with extended keyboard,
          use=newhpkeyboard, use=hp2621b,
  hp2621b-kx-p|hp 2621b with new keyboard & printer,
          use=hp+printer, use=hp2621b-kx,
  # Some assumptions are made in the following entries.
  # These settings are NOT set up by the initialization strings.
  #
  #    Port Configuration
  # RecvPace=Xon/Xoff     XmitPace=Xon/Xoff       StripNulDel=Yes
  #
  #    Terminal Configuration
  # InhHndShk(G)=Yes      InhDC2(H)=Yes
  # XmitFnctn(A)=No               InhEolWrp=No
  #
  #
  # Hp 2622a & hp2623a display and graphics terminals
  #
  hp2622|hp2622a|hp 2622,
          da, db,
          lm#0, pb#19200,
          is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
  # The 2623 is a 2622 with extra graphics hardware.
  hp2623|hp2623a|hp 2623,
          use=hp2622,
  hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
          use=hp+printer, use=hp2624,
  # The hewlett packard B can have an optional extra 6 pages of memory.
  hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
          lm#240, use=hp2624,
  hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
          lm#240, use=hp2624b-p,
  # Color manipulations for HP terminals
  hp+color|hp with colors,
          ccc,
          colors#16, ncv#17, pairs#7,
          initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
          oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
          op=\E&v0S, scp=\E&v%p1%dS,
  # <is2> sets the screen to be 80 columns wide
  hp2397a|hp2397|hewlett packard 2397A color terminal,
          is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color,
  #  HP 700/44 Setup parameters:
  # Terminal Mode         HP-PCterm
  # Inhibit Auto Wrap     NO
  # Status Line           Host Writable
-Line 6170
+Line 6395
 Line 6170
 Line 6395
  # Keycode Mode          NO   or YES (sc)
  # Backspace Key         BS or BS/DEL
  #
  # <is2>         sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
  # \E\\? does not turn off keycode mode
  # <smsc>        sets alternate start/stop; keycode on
  hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
          am, eo, xenl, xon,
          cols#80, lines#25,
          acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
          bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
          cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
          ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
          ind=^J,
          is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
          kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
          kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
          kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
          kpp=\E[5~, rmam=\E[?7l,
          rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
          rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
          smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
          smul=\E[4m, xoffc=g, xonc=e,
  #
  # (hp2392: copied <rmir> here from hpex -- esr)
  hp2392|239x series,
          cols#80,
          cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
          kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
          kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
          rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
          use=hpsub,
  hpsub|hp terminals -- capability subset,
          am, da, db, mir, xhp, xon,
          lines#24,
          bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
          cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
          ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
          is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
          sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
  # hpex:
  #       May be used for most 24 x 80 hp terminals,
  # but has no padding added, so may allow runover in some terminals at high
  # baud rates.  Will not work for hp2640a or hp2640b terminals, hp98x6 and
  # hp98x5 terminal emulators or hp98x6 consoles.
  #       Adds xy-cursor addressing, vertical cursor addressing, home,
  # last line, and underline capabilities.
  #
  # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
  # moved <rmir> here from hpsub -- esr)
  hpex|hp extended capabilites,
          cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
          kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
          smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,
  # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
  hp2|hpex2|hewlett-packard extended capabilities newer version,
          am, da, db, mir, xhp,
          cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
          bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
          cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
          dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
          il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
          ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
          kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
          kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
          krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
          pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
          pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
          pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
          pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
          rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
          sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
          sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
          smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
  # HP 236 console
  # From: <ddavis@ic.berkeley.edu>
  hp236|hp236 internal terminal emulator,
          OTbs, am,
          cols#80, lines#24,
          clear=\EF, cnorm=\EDE, cub1=^H,
          cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
          dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
          sgr0=\ECI, smso=\EBI,
  # This works on a hp300 console running Utah 4.3 BSD
  # From: Craig Leres <leres@okeeffe.berkeley.edu>
  hp300h|HP Catseye console,
          OTbs, am, da, db, mir, xhp,
          cols#128, lines#51, lm#0, xmc#0,
          bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
          cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
          dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
          if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
          kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
          rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
          smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
          vpa=\E&a%p1%dY,
  # From: Greg Couch <gregc@ernie.berkeley.edu>
  hp9837|hp98720|hp98721|HP 9000/300 workstations,
          OTbs, am, da, db, mir, xhp,
          cols#128, it#8, lines#46, lm#0,
          bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
          cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
          dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
          il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
          ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
          kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
          sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
          tbc=\E3, vpa=\E&a%p1%dY,
  # HP 9845 desktop computer from BRL
  # (hp9845: removed unknown capability :gu: -- esr)
  hp9845|HP 9845,
          OTbs, am, da, db, eo, mir, xhp,
          cols#80, lines#21,
          OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY,
          cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
          if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
          smir=\EQ, smso=\E&dB,
  # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
  # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
  # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
  hp98550|hp98550a|HP 9000 Series 300 color console,
          OTbs, am, da, db, mir, xhp,
          cols#128, it#8, lines#49, lm#0,
          acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
          clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
          dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
          if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
          kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
          kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
          khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
          knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
          rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
          sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
          smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
  # From: Victor Duchovni <vic@fine.princeton.edu>
  # (hp700-wy: removed obsolete ":nl=^J:";
  # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
  hp700-wy|HP700/41 emulating wyse30,
          OTbs, am, bw, mir, msgr,
          cols#80, it#8, lines#24, xmc#1,
          cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
          if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
          is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
          kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
          kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
          ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
          sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
          smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
  hp70092|hp70092a|hp70092A|HP 700/92,
          am, da, db, xhp,
          cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
          acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
          bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
          cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
          dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
          hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
          ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
          kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
          kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
          krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
          rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
          sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
          smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
  bobcat|sbobcat|HP 9000 model 300 console,
          am, da, db, mir, xhp,
          cols#128, it#8, lines#47, xmc#0,
          cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP,
          dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I,
          il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER,
          rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ,
          smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>,
  gator-t|HP 9000 model 237 emulating extra-tall AAA,
          lines#94, use=gator,
  gator|HP 9000 model 237 emulating AAA,
          bw, km, mir, ul,
          cols#128, it#8, lines#47,
          bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
          dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
          dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
          ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
          il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
          rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
          rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
  gator-52|HP 9000 model 237 emulating VT52,
          cols#128, lines#47, use=vt52,
  gator-52t|HP 9000 model 237 emulating extra-tall VT52,
          lines#94, use=gator-52,
  #### Honeywell-Bull
  #
-Line 6383
+Line 6608
 Line 6383
 Line 6608
  # control characters and it has standout/underline glitch.  Most programs
  # do not like these features/bugs.  Visual bell is realized by flashing the
  # "keyboard locked" LED.
  dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
          cols#80, lines#25,
          clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
          cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
          flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
          kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
  dku7003|Honeywell Bull DKU 7003 all features described,
          msgr,
          xmc#1,
          blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
          rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
          use=dku7003-dumb,
  #### Lear-Siegler (adm)
  #
-Line 6403
+Line 6628
 Line 6403
 Line 6628
  # emulations (usually their stupidest, and usually labeled adm3, though
  # these `adm3' emulations normally have adm3a+ capabilities).
  #
  # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
  # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
  # was being held to ground would trigger a send of the top line on the screen.
  # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
  # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
  # for clearing up this point.)
  adm1a|adm1|lsi adm1a,
          am,
          cols#80, lines#24,
          bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
          ind=^J,
  adm2|lsi adm2,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
          kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
  # (adm3: removed obsolete ":ma=^K^P:" -- esr)
  adm3|lsi adm3,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
  # The following ADM-3A switch settings are assumed for normal operation:
  #       SPACE           U/L_DISP        CLR_SCRN        24_LINE
  #       CUR_CTL         LC_EN           AUTO_NL         FDX
-Line 6440
+Line 6665
 Line 6440
 Line 6665
  # socket, you may be out of luck.
  #
  # (adm3a: some capabilities merged in from BRl entry -- esr)
  adm3a|lsi adm3a,
          OTbs, am,
          cols#80, lines#24,
          OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
          cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
          kcuu1=^K, rs2=^N,
  adm3a+|adm3a plus,
          kbs=^H, use=adm3a,
  # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
  adm5|lsi adm5,
          xmc#1,
          bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
          rmso=\EG, smso=\EG, use=adm3a+,
  # A lot of terminals other than adm11s use these.  Wherever you see
  # use=adm+sgr with some of its capabilities disabled, try the
  # disabled ones.  They may well work but not have been documented or
  # expressed in the using entry.  We'd like to cook up an <sgr> but the
  # <rmacs>/<smacs> sequences of the using entries vary too much.
  adm+sgr|adm style highlight capabilities,
          invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
          smso=\EG4, smul=\EG8,
  # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
  # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
  # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>.  <clear> could also
  # be ^Z, according to his entry.
  # (adm11: <smul>=\EG4 was obviously erroneous because it also said
  # <rev>=\EG4.  Looking at other ADMs confirms this -- esr)
  adm11|LSI ADM-11,
          OTbs, am, hs,
          OTkn#8, cols#80, lines#24,
          OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
          cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
          kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
          kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
          kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
          use=adm+sgr,
  # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
  # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
  # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
  # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :".  This formerly had
  # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
  # via BRL.  That entry asserted <xmc#1>, but I've left that out because
  # neither earlier nor later ADMSs have it -- esr)
  #
  # You will need to get into the supervisor setup before you can set
  # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
  # see a lot more setup options.
  #
  # While in supervisor setup you can also use following codes:
  #
  # Ctrl-P Personality character selections (configure for example what
  #        arrow keys send, if I recall correctly)
  # Ctrl-T tabs 1-80   use left&right to move and up to set and
-Line 6504
+Line 6729
 Line 6504
 Line 6729
  # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
  # Ctrl-R Reads both setup and functions keys from NVM.
  # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
  #
  # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
  # RTS/CTS used nowadays with virtually every modem and computer. 19200
  # bps works fine with hardware flow control.
  #
  # The following null-modem cable should fix this and enable you to use
  # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
  # set ADM-12+ for DTR handshaking from supervisor setup.
  #
  # PC Serial   ADM-12+
  #  --------   -------
  #         2 - 3
-Line 6523
+Line 6748
 Line 6523
 Line 6748
  #         7 - 7
  #        20 - 6,8
  #
  adm12|lsi adm12,
          OTbs, OTpt, am, mir,
          OTug#1, cols#80, it#8, lines#24,
          bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
          is2=\E0        \E1        \E1        \E1        \E1        \E1        \E1        \E1        \E1,
          kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
          kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
          kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
          use=adm+sgr,
  # (adm20: removed obsolete ":kn#7:" -- esr)
  adm20|lear siegler adm20,
          OTbs, am,
          cols#80, it#8, lines#24,
          bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
          cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
          kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
          sgr0=\E(, smso=\E),
  adm21|lear siegler adm21,
          xmc#1,
          bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
          ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
          kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr,
          use=adm3a,
  # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
  # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
  # removed bogus-looking \200 from before <cup>. -- esr)
  adm22|lsi adm22,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
          is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
          kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
          kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
          kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
          lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
  # ADM 31 DIP Switches
  #
  # This information comes from two versions of the manual for the
-Line 6583
+Line 6808
 Line 6583
 Line 6808
  #   +                                          +
  # +-+                                          +-+
  # +                                              +
  # +                               S5 S6 S7       +
  # +                               == == ==       +
  # +----------------------------------------------+
  #            front of case (keyboard)
-Line 6706
+Line 6931
 Line 6706
 Line 6931
  # position 6, bank @c11, 25% from back end of the circuit board.  Should be
  # OFF.  If there is no such switch, you have an old adm31 and must use oadm31.
  # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
  adm31|lsi adm31 with sw6 set for underline mode,
          OTbs, am, mir,
          cols#80, lines#24,
          bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
          kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
          kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
          kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
          rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
  adm31-old|o31|old adm31,
          rmul@, smso=\EG4, smul@, use=adm31,
  # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
  adm36|LSI ADM36,
          OTbs, OTpt,
          OTkn#4,
          if=/usr/share/tabset/vt100,
          is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l,
          use=vt100,
  # (adm42: removed obsolete ":ma=^K^P:" -- esr)
  adm42|lsi adm42,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
          il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
          kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
          smir=\Eq, smul@, use=adm+sgr,
  # The following termcap for the Lear Siegler ADM-42 leaves the
  # "system line" at the bottom of the screen blank (for those who
  # find it distracting otherwise)
  adm42-ns|lsi adm-42 with no system line,
          cbt=\EI\EF \011, clear=\E;\EF \011,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
          dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
          el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
          smir=\Eq\EF \011, use=adm42,
  # ADM 1178 terminal -- rather like an ADM-42.  Manual is dated March 1 1985.
  # The insert mode of this terminal is commented out because it's broken for our
  # purposes in that it will shift the position of every character on the page,
  # not just the cursor line!
  # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
  adm1178|1178|lsi adm1178,
          am,
          cols#80, lines#24, xmc#1,
          bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
          cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
          home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
          kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
          sgr0=\E), smso=\EG4, smul=\EG1,
  #### Prime
  #
-Line 6771
+Line 6996
 Line 6771
 Line 6996
  #
  # Standout mode is dim reverse-video.
  pt100|pt200|wren|fenix|prime pt100/pt200,
          am, bw, mir, msgr,
          cols#80, it#8, lines#24,
          cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
          cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M,
          ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
          home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
          rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m,
          smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
          smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
  pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
          cols#132,
          cup=\E[%i%p1%d;%p2%dH, use=pt100,
  pt250|Prime PT250,
          rmso@, smso@, use=pt100,
  pt250w|Prime PT250 in 132-column mode,
          rmso@, smso@, use=pt100w,
  #### Qume (qvt)
  #
-Line 6827
+Line 7052
 Line 6827
 Line 7052
  # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
  # setup mode.  Shift-s should be a configuration save to NVRAM.
  qvt101|qvt108|qume qvt 101 and QVT 108,
          xmc#1, use=qvt101+,
  # This used to have <cvvis=\E.2> but no <cnorm> or <civis>.  The BSD termcap
  # file had <cvvis=\EM4 \200\200\200>.  I've done the safe thing and yanked
  # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
  # What seems to be going on here is that this entry was designed so that
  # the normal highlight is bold and standout is dim plus something else
  # (reverse-video maybe?  But then, are there two <rev> sequences?)
  qvt101+|qvt101p|qume qvt 101 PLUS product,
          am, bw, hs, ul,
          cols#80, lines#24, xmc#0,
          bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
          cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
          flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
          ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
          kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
          kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
          kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
          khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
          smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
  qvt102|qume qvt 102,
          cnorm=\E., use=qvt101,
  # (qvt103: added <rmam>/<smam> based on init string -- esr)
  qvt103|qume qvt 103,
          am, xenl, xon,
          cols#80, it#8, lines#24, vt#3,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
          clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C$<2>,
          cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
          cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
          hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
          kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
          rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
          rmso=\E[m$<2>, rmul=\E[m$<2>,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
          sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
          smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
  qvt103-w|qume qvt103 132 cols,
          cols#132, lines#24,
          rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
  qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
          am, hs, mir, msgr,
          cols#80, lines#24, xmc#0,
          bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
          cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
          el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
          hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
          kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
          kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
          kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
          mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
          tbc=\E3, tsl=\Eg\Ef, use=adm+sgr,
  qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
          lines#25, use=qvt119+,
  qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
          cols#132,
          is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
  qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
          lines#25, use=qvt119+,
  qvt203|qvt203+|qume qvt 203 Plus,
          dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
          ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
          kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
          kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103,
  qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
          cols#132, lines#24,
          rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
  #
  #       Since a command is present for enabling 25 data lines,
  #       a specific terminfo entry may be generated for the 203.
  #       If one is desired for the QVT 119 PLUS then 25 lines must
  #       be selected in the status line (setup line 9).
  #
  qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
          cols#80, lines#25,
          is2=\E[=40h\E[?3l, use=qvt203,
  qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
          cols#132, lines#25,
          rs2=\E[?3h\E[=40h, use=qvt203,
  #### Televideo (tvi)
  #
-Line 6928
+Line 7153
 Line 6928
 Line 7153
  # All of these terminals (912 to 970 and the tvipt) are discontinued.  Newer
  # Televideo terminals are ANSI and PC-ANSI compatible.
  tvi803|televideo 803,
          clear=\E*$<10>, use=tvi950,
  # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
  # Switch settings are:
  #
  # S1  1 2 3 4
  #     D D D D  9600
  #     D D D U    50
-Line 6951
+Line 7176
 Line 6951
 Line 7176
  #     U U D U  7200
  #     U U U D  9600
  #     U U U U 19200
  #
  # S1  5 6 7 8
  #     U D X D  7N1 (data bits, parity, stop bits) (X means ignored)
  #     U D X U  7N2
-Line 6963
+Line 7188
 Line 6963
 Line 7188
  #     D D X U  8N2
  #     D U D D  8O1
  #     D U U U  8E2
  #
  # S1  9  Autowrap
  #     U  on
  #     D  off
  #
  # S1 10  CR/LF
  #     U  do CR/LF when CR received
  #     D  do CR when CR received
  #
  # S2  1  Mode
  #     U  block
  #     D  conversational
  #
  # S2  2  Duplex
  #     U  half
  #     D  full
  #
  # S2  3  Hertz
  #     U  50
  #     D  60
  #
  # S2  4  Edit mode
  #     U  local
  #     D  duplex
  #
  # S2  5  Cursor type
  #     U  underline
  #     D  block
  #
  # S2  6  Cursor down key
  #     U  send ^J
  #     D  send ^V
  #
  # S2  7  Screen colour
  #     U  green on black
  #     D  black on green
  #
  # S2  8  DSR status (pin 6)
  #     U  disconnected
  #     D  connected
  #
  # S2  9  DCD status (pin 8)
  #     U  disconnected
  #     D  duplex
  #
  # S2 10  DTR status (pin 20)
  #     U  disconnected
  #     D  duplex
  # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
  # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
  tvi910|televideo model 910,
          OTbs, am, msgr,
          cols#80, it#8, lines#24, xmc#1,
          bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
          home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
          if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
          kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
          kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
          kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
          vpa=\E[%p1%{32}%+%c, use=adm+sgr,
  # From: Alan R. Rogers <rogers%albany@csnet-relay>
  # as subsequently hacked over by someone at SCO
  # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
-Line 7040
+Line 7265
 Line 7040
 Line 7265
  #     U D X D  7N1     U D X U  7N2     U U D D  7O1     U U D U  7O2
  #     U U U D  7E1     U U U U  7E2     D D X D  8N1     D D X U  8N2
  #     D U D D  8O1     D U U U  8E2
  #
  # S1  9  Autowrap            (U = on, D = off)
  # S1 10  CR/LF               (U = CR/LF on CR received, D = CR on CR received)
  # S2  1  Mode                (U = block, D = conversational)
-Line 7054
+Line 7279
 Line 7054
 Line 7279
  # S2  9  DCD status (pin 8)  (U = disconnected, D = connected)
  # S2 10  DTR status (pin 20) (U = disconnected, D = connected)
  #
  tvi910+|televideo 910+,
          dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
          kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
          kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
          ll=\E=7\s, use=tvi910,
  # (tvi912: removed obsolete ":ma=^K^P^L :", added  <flash> and
  # <khome> from BRL entry -- esr)
  tvi912|tvi914|tvi920|old televideo 912/914/920,
          OTbs, OTpt, am, msgr,
          cols#80, it#8, lines#24, xmc#1,
          bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
          ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
          il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
          kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
          kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
          kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
          tbc=\E3,
  # We got some new tvi912c terminals that act really weird on the regular
  # termcap, so one of our gurus worked this up. Seems that cursor
  # addressing is broken.
  tvi912cc|tvi912 at cowell college,
          cup@, use=tvi912c,
  # tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C
  # From: Benjamin C. W. Sittler
-Line 7219
+Line 7444
 Line 7219
 Line 7444
  # 9:         Even parity             Odd parity
  # 10:       Steady cursor           Blinking cursor
  #       (On Rev E or lower, use W25 instead of switch 10.)
  #
  # S5 UART/Terminal options:
  #               Open                    Closed
  # 1:    P3-6 Not connected      DSR received on P3-6
-Line 7245
+Line 7470
 Line 7245
 Line 7470
  #
  # S4/W31:       Enables automatic LF upon receipt of CR from
  #               remote or keyboard.
  # S4/W32:       Enables transmission of EOT at the end of Send.  If not
  #               installed, a carriage return is sent.
  # S4/W33:       Disables automatic carriage return in column 80.
  # S4/W34:       Selects Page Print Mode as initial condition.  If not
  #               installed, Extension Mode is selected.
  #
  # NON-STANDARD CAPABILITIES
-Line 7473
+Line 7698
 Line 7473
 Line 7698
  # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
  # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
  # also added empty <acsc> to suppress tic warning -- esr)
  tvi921|televideo model 921 with sysline same as page & real vi function,
          OTbs, OTpt, am, hs, xenl, xhp,
          cols#80, lines#24, xmc#0,
          acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
          cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
          el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
          if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
          is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
          kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
          ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%,
          rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr,
  # without the beeper
  # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
  # also added empty <acsc> to suppress tic warning -- esr)
  tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
          am, hs, xenl, xhp,
          cols#80, lines#24, xmc#0,
          acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
          cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
          el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
          ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
          invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
          kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
          kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
          nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr,
  # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
  tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
          dl1=\ER$<2*/>, il1=\EE$<2*/>,
          is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
          kil1=\EE$<2*/>, use=tvi92B,
  # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>.  I put the new strings
  # in from a BSD termcap file because it looks like they do something the
  # old ones skip -- esr)
  tvi924|televideo tvi924,
          am, bw, hs, in, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, wsl#80, xmc#0,
          bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
          cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
          cub1=^H, cud1=^V, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
          dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
          flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
          ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
          invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
          kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
          kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
          kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
          kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
          kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
          kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
          lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
          pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef,
          use=adm+sgr,
  # TVI925 DIP switches.  In each of these, D = Down and U = Up,
  #
-Line 7554
+Line 7779
 Line 7554
 Line 7779
  # U     U       D       U       7200
  # U     U       U       D       9600
  # U     U       U       U       19200
  #
  #
  # Settings for word length and stop-bits (S1)
  #
  #  Position     Description
  # 5     6
  # ---------------------------
  # U     -       7-bit word
  # D     -       8-bit word
  # -     U       2 stop bits
  # -     D       1 stop bit
  #
  #
  # S2 (external) settings
  #
  # Position      Up      Dn      Description
-Line 7579
+Line 7804
 Line 7579
 Line 7804
  # --------------------------------------------
  # 3                     X
  # 4                     X       No parity
  # 5                     X
  # --------------------------------------------
  # 3                     X
  # 4                     X       Odd parity
  # 5             X
  # --------------------------------------------
  # 3                     X
  # 4             X               Even parity
  # 5             X
  # --------------------------------------------
  # 3             X
  # 4                     X       Mark parity
  # 5             X
  # --------------------------------------------
  # 3             X
  # 4             X               Space parity
-Line 7604
+Line 7829
 Line 7604
 Line 7829
  # 8                     X
  # --------------------------------------------
  # 7             X               Full Duplex
  # 8                     X
  # --------------------------------------------
  # 7                     X       Block mode
  # 8             X
  # --------------------------------------------
  # 9                     X       50 Hz
  #               X               60 Hz
  # --------------------------------------------
  # 10            X               CR/LF (Auto LF)
  #                       X       CR only
  #
  # S3 (internal switch) settings:
  #
  # Position      Up      Dn      Description
  # --------------------------------------------
  # 1             X               Keyclick off
  #                       X       Keyclick on
  # --------------------------------------------
  # 2                     X       English
  # 3                     X
  # --------------------------------------------
  # 2                     X       German
  # 3             X
  # --------------------------------------------
  # 2             X               French
  # 3                     X
  # --------------------------------------------
  # 2             X               Spanish
  # 3             X
  # --------------------------------------------
  # 4                     X       Blinking block cursor
  # 5                     X
  # --------------------------------------------
  # 4                     X       Blinking underline cursor
  # 5             X
  # --------------------------------------------
  # 4             X               Steady block cursor
  # 5                     X
  # --------------------------------------------
  # 4             X               Steady underline cursor
  # 5             X
  # --------------------------------------------
  # 6             X               Screen blanking timer (ON)
  #                       X       Screen blanking timer (OFF)
-Line 7663
+Line 7888
 Line 7663
 Line 7888
  # --------------------------------------------
  #
  # (tvi925: BSD has <clear=\E*>.  I got <is2> and <ri> from there -- esr)
  tvi925|televideo 925,
          OTbs, am, bw, hs, ul,
          cols#80, lines#24, xmc#1,
          bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
          cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
          flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
          ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
          kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
          ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
          kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
          kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
          tsl=\Eh\Ef, use=adm+sgr,
  # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
  # to avoid "magic cookie" standout glitch:
  tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
          xmc@,
          kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
  # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
  # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
  # for additional capabilities,
  # The following tvi descriptions from B:pjphar and virus!mike
  # is for all 950s.  It sets the following attributes:
  # full duplex (\EDF)            write protect off (\E()
-Line 7703
+Line 7928
 Line 7703
 Line 7928
  #       start-protected field delimiter (\Ex2\200\200)
  #       end-protected field delimiter (\Ex3\200\200)
  # set end of text delimiter to carriage return/null (\Ex4\r\200)
  #
  #                     TVI 950 Switch Setting Reference Charts
  #
  #                                     TABLE 1:
  #
  #      S1     1     2     3     4     5     6     7     8     9    10
  #          +-----------------------+-----+-----+-----------------------+
  #          | Computer Baud Rate    |Data |Stop | Printer Baud Rate     |
-Line 7717
+Line 7942
 Line 7717
 Line 7942
  #   +------+-----------------------+-----+-----+-----------------------+
  #   | Down |      TABLE 2          |  8  |  1  |      TABLE 2          |
  #   +------+-----------------------+-----+-----+-----------------------+
  #
  #
  #      S2     1     2     3     4     5     6     7     8     9    10
  #          +-----+-----+-----------------+-----+-----------+-----+-----+
  #          |Edit |Cursr|    Parity       |Video|Transmiss'n| Hz  |Click|
-Line 7727
+Line 7952
 Line 7727
 Line 7952
  #   +------+-----+-----+-----------------+-----+-----------+-----+-----+
  #   | Down |Local|St'dy|    TABLE 3      |BkonG|  CHART    | 50  | On  |
  #   +------+-----+-----+-----------------+-----+-----------+-----+-----+
  #
  #                                    TABLE 2:
  #
  #             +-----------+-----+-----+-----+-----+-----------+
  #             | Display   |  1  |  2  |  3  |  4  |   Baud    |
  #             +-----------+-----+-----+-----+-----+           |
-Line 7752
+Line 7977
 Line 7752
 Line 7977
  #                         |  D  |  U  |  U  |  U  |   9600    |
  #                         |  U  |  U  |  U  |  U  |  19200    |
  #                         +-----+-----+-----+-----+-----------+
  #
  #                                    TABLE 3:
  #                         +-----+-----+-----+-----------+
  #                         |  3  |  4  |  5  |   Parity  |
-Line 7764
+Line 7989
 Line 7764
 Line 7989
  #                         |  U  |  U  |  U  |   Space   |
  #                         +-----+-----+-----+-----------+
  #                                 X = don't care
  #
  #                                     CHART:
  #                         +-----+-----+-----------------+
  #                         |  7  |  8  | Communication   |
-Line 7774
+Line 7999
 Line 7774
 Line 7999
  #                         |  U  |  D  |     Block       |
  #                         |  U  |  U  |     Local       |
  #                         +-----+-----+-----------------+
  #
  # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
  # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
  # should be present and all tvi native modes use the same string for this.
  # Finally, note that BSD has cud1=^V. -- esr)
  tvi950|televideo 950,
          OTbs, am, hs, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, xmc#1,
          acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
          cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
          fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
          invis@,
          is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
          kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
          kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
          kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
          kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
          kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
          rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
          use=adm+sgr,
  #
  # is for 950 with two pages adds the following:
  #       set 48 line page (\E\\2)
-Line 7809
+Line 8034
 Line 7809
 Line 8034
  #       set duplex (send) edit keys (\El) when entering vi
  #       set local (no send) edit keys (\Ek) when exiting vi
  #
  tvi950-2p|televideo950 w/2 pages,
          is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
          rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
          smkx=\El, use=tvi950,
  #
  # is for 950 with four pages adds the following:
  #       set 96 line page (\E\\3)
-Line 7823
+Line 8048
 Line 7823
 Line 8048
  #       when exiting ex, reset 96 line page (\E\\3)
  #                        place cursor at 0,24,1 (\E-07 )
  #
  tvi950-4p|televideo950 w/4 pages,
          is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
          rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
          smkx=\El, use=tvi950,
  #
  # <is2> for reverse video 950 changes the following:
  #       set reverse video (\Ed)
  #
  # set vb accordingly (\Ed ...delay... \Eb)
  #
  tvi950-rv|televideo950 rev video,
          flash=\Ed$<200/>\Eb,
          is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0,
          use=tvi950,
  # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
  tvi950-rv-2p|televideo950 rev video w/2 pages,
          flash=\Ed$<200/>\Eb,
          is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
          rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
          smkx=\El, use=tvi950,
  # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
  tvi950-rv-4p|televideo950 rev video w/4 pages,
          flash=\Ed$<200/>\Eb,
          is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
          rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
          smkx=\El, use=tvi950,
  # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
  # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
  # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
-Line 7861
+Line 8086
 Line 7861
 Line 8086
  # ko implies -- esr)
  # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
  # also work.
  tvi955|televideo 955,
          OTbs, mc5i, msgr@,
          it#8, xmc@,
          acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
          civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
          cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
          is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
          knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%,
          rmam=\E[=7l, rmxon=^N,
          rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
          sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
          use=tvi950,
  tvi955-w|955-w|televideo955 w/132 cols,
          cols#132,
          is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
  # use half-intensity as normal mode, full intensity as <bold>
  tvi955-hb|955-hb|televideo955 half-bright,
          bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
          sgr0=\EG0\E[=5h, use=tvi955,
  # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
  # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
  # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
  # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
  # it does to the function keys.  I deduced <rmam>/<smam>.
  # also added empty <acsc> to suppress tic warning,  -- esr)
  tvi970|televideo 970,
          OTbs, OTpt, am, da, db, mir, msgr,
          cols#80, it#8, lines#24,
          acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
          cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
          ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
          hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
          is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
          kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
          kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
          rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
          smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
          smul=\E[4m, vpa=\E[%i%p1%dd,
  tvi970-vb|televideo 970 with visual bell,
          flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
          use=tvi970,
  tvi970-2p|televideo 970 with using 2 pages of memory,
          rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
          use=tvi970,
  # Works with vi and rogue.  NOTE: Esc v sets autowrap on, Esc u sets 80 chars
  # per line (rather than 40), Esc K chooses the normal character set.  Not sure
  # padding is needed, but adapted from the tvi920c termcap.  The <smso> and
  # <smul> strings are klutzy, but at least use no screen space.
  # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:".  I wish we knew <rmam>,
  # its absence means <smam>=\Ev isn't safe to use. -- esr)
  # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
  # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
  # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
  tvipt|televideo personal terminal,
          OTbs, am,
          cols#80, lines#24,
          cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
          ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
          il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
          kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
          rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
  # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
  tvi9065|televideo 9065,
          am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
          cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
          wnum#0, wsl#30,
          acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
          blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
          cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
          cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
          cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
          dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
          el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
          ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
          il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
          ip=$<3>,
          is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
          is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
          kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
          kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
          kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
          kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
          mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
          pfkey=\E|%p1%{48}%+%c3%p2%s\031,
          pfloc=\E|%p1%{48}%+%c2%p2%s\031,
          pfx=\E|%p1%{48}%+%c1%p2%s\031,
          pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
          rep=\E[%p2%db%p1%c, rev=\EG4,
          rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
          rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
          rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
          rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
          rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
          rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
          sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
          sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
          smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
          tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
  #### Visual (vi)
  #
-Line 7977
+Line 8202
 Line 7977
 Line 8202
  # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
  # Recently I hacked together the following termcap for Visual
  # Technology's Visual 50 terminal. It's a slight modification of
  # the vt52 termcap.
  # It's intended to run when the Visual 50 is in vt52 emulation mode
  # (I know what you're thinking; if it's emulating a vt52, then why
  # another termcap? Well, it turns out that the Visual 50 can handle
-Line 7988
+Line 8213
 Line 7988
 Line 8213
  # Beau's entry is combined with the vi50 entry from University of Wisconsin.
  # Note especially the <il1> function.  <kf4>-<kf6> are really l4-l6 in
  # disguise; <kf7>-<kf9> are really l1-l3.
  vi50|visual 50,
          OTbs, OTpt, am, da, db, msgr,
          cols#80, it#8, lines#24,
          OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
          cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
          ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
          kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
          nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
  # this one was BSD & SCO's vi50
  vi50adm|visual 50 in adm3a mode,
          am, msgr,
          cols#80, it#8, lines#24,
          bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
          ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
          kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
          rmso=\ET, smso=\EU,
  # From: Jeff Siegal <jbs@quiotix.com>
  vi55|Visual 55,
          OTbs, am, mir, msgr,
          cols#80, it#8, lines#24,
          clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
          cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
          il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
          smir=\Ea, smso=\EU,
  # Visual 200 from BRL
  # The following switch settings are assumed for normal operation:
-Line 8028
+Line 8253
 Line 8028
 Line 8253
  # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
  # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
  # and <dl1> strings, but we seem to get along fine without them.
  vi200|visual 200,
          OTbs, OTpt, am, mir, msgr,
          OTkn#10, cols#80, it#8, lines#24,
          acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
          cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
          el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
          kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
          kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
          kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
          kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
          rmacs=\EG, rmkx=\E>, rmso=\E3,
          rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
          smkx=\E=, smso=\E4, tbc=\Eg,
  # The older Visuals didn't come with function keys. This entry uses
  # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
  # If your version of vi doesn't support function keys you may want
  # to use vi200-f.
  vi200-f|visual 200 no function keys,
          is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
          kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
          kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
          use=vi200,
  vi200-rv|visual 200 reverse video,
          cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
  # the function keys are programmable but we don't reprogram them to their
  # default values with <is2> because programming them is very verbose. maybe
  # an initialization file should be made for the 300 and they could be stuck
  # in it.
  # (vi300: added <rmam>/<smam> based on init string -- esr)
  vi300|visual 300 ansi x3.64,
          am, bw, mir, xenl,
          cols#80, lines#24,
          bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
          dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
          il1=\E[L, ind=^J,
          is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
          kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
          kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
          rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
          smso=\E[1m, smul=\E[4m,
  # some of the vi300s have older firmware that has the command
  # sequence for setting editing extent reversed.
  vi300-old|visual 300 with old firmware (set edit extent reversed),
          is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
          use=vi300,
  # Visual 500 prototype entry from University of Wisconsin.
  # The best place to look for the escape sequences is page A1-1 of the
-Line 8089
+Line 8314
 Line 8089
 Line 8314
  # of this slow terminal.  :xp: is 10 time the padding factor.
  # (vi500: removed unknown :xp#4: termcap;
  # also added empty <acsc> to suppress tic warning -- esr)
  vi500|visual 500,
          am, mir, msgr,
          cols#80, it#8, lines#33,
          acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
          csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
          cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
          dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
          el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
          ind=^J,
          is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
          kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
          khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
          rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
  # The visual 550 is a visual 300 with tektronix graphics,
  # and with 33 lines. clear screen is modified here to
  # also clear the graphics.
  vi550|visual 550 ansi x3.64,
          lines#33,
          clear=\030\E[H\E[2J, use=vi300,
  vi603|visual603|visual 603,
          hs, mir,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
          csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
          dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
          ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
          rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
          sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
          use=vt100,
  #### Wyse (wy)
  #
-Line 8154
+Line 8379
 Line 8154
 Line 8379
  #       If more than one attribute is needed then the wy30-mc terminfo
  #       should be used.
  #
  wy30|wyse30|Wyse 30,
          am, bw, hs, mc5i, mir, msgr, xon,
          cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
          acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
          civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
          cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
          dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
          fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
          ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
          kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
          kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
          kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
          kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
          kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
          mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
          pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
          rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
          sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
          sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
          smso=\E`7\E), tbc=\E0, tsl=\EF,
  #
  #       This terminal description uses the non-hidden attribute mode
  #       (with magic cookie).
  #
  # (wy30-mc: added <smcup> to suppress tic warning --esr)
  wy30-mc|wyse30-mc|wyse 30 with magic cookies,
          msgr@,
          ma@, xmc#1,
          blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
          rmcup=\EG0, rmso=\EG0,
          sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
          sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
          smso=\EG4, use=wy30, use=adm+sgr,
  #       The mandatory pause used by <flash> does not work with
  #       older versions of terminfo.  If you see this effect then
  #       unset xon and delete the / from the delay.
  #       i.e. change $<100/> to $<100>
  wy30-vb|wyse30-vb|wyse 30 visible bell,
          bel@, use=wy30,
  #
  #          The Wyse 50 can support one attribute (e.g. Dim, Inverse,
  #       Normal) without magic cookies by using the protect mode.
-Line 8204
+Line 8429
 Line 8204
 Line 8429
  #       cookies.  The wy50-mc terminal description uses magic cookies
  #       to correctly handle multiple attributes on a screen.
  #
  wy50|wyse50|Wyse 50,
          am, bw, hs, mc5i, mir, msgr, xon,
          cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
          acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
          civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
          cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
          ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
          home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
          is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
          kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
          kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
          kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
          kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
          kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
          kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
          ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
          pfx=\Ez%p1%{63}%+%c%p2%s\177,
          pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
          ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
          sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
          sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
          smso=\E`6\E), tbc=\E0, tsl=\EF,
  #
  #       This terminal description uses the non-hidden attribute mode
  #       (with magic cookie).
-Line 8236
+Line 8461
 Line 8236
 Line 8461
  #       unset <xon> and delete the / from the delay.
  #       i.e. change $<100/> to $<100>
  # (wy50-mc: added <smcup> to suppress tic warning --esr)
  wy50-mc|wyse50-mc|wyse 50 with magic cookies,
          msgr@,
          ma@, xmc#1,
          blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
          rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
          sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
          sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
          smso=\EGt, use=wy50, use=adm+sgr,
  wy50-vb|wyse50-vb|wyse 50 visible bell,
          bel@, use=wy50,
  wy50-w|wyse50-w|wyse 50 132-column,
          cols#132, lw#7, nlab#16, wsl#97,
          cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
          use=wy50,
  wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
          bel@, use=wy50-w,
  #
  #       The Wyse 350 is a Wyse 50 with color.
-Line 8264
+Line 8489
 Line 8264
 Line 8489
  #           To further complicate things one of the attributes must be
  #       black (either the foreground or the background).  In reverse video
  #       the background changes color with black letters.  In normal video
  #       the foreground changes colors on a black background.
  #           This terminfo uses some of the more advanced features of curses
  #       to display both color and blink.  In the final analysis I am not
  #       sure that the wy350 runs better with this terminfo than it does
-Line 8276
+Line 8501
 Line 8276
 Line 8501
  #       i.e. change $<100/> to $<100>
  #
  # Bug: The <op> capability resets attributes.
  wy350|wyse350|Wyse 350,
          am, bw, hs, mc5i, mir, xon,
          colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
          wsl#45, xmc#1,
          acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
          cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
          cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
          dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
          flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
          il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
          is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
          kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
          ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
          kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
          kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
          kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
          kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
          ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
          pfx=\Ez%p1%{63}%+%c%p2%s\177,
          pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
          rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
          setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
          sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
          sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
          smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr,
  wy350-vb|wyse350-vb|wyse 350 visible bell,
          bel@, use=wy350,
  wy350-w|wyse350-w|wyse 350 132-column,
          cols#132, lw#7, nlab#16, wsl#97,
          cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>,
          use=wy350,
  wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
          bel@, use=wy350-w,
  #
  #       This terminfo description is untested.
  #       The wyse100 emulates an adm31, so the adm31 entry should work.
  #
  wy100|wyse 100,
          hs, mir,
          cols#80, lines#24, xmc#1,
          bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
          invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
          kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
          kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
          rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr,
  #
  #       The Wyse 120/150 has most of the features of the Wyse 60.
  #       This terminal does not need padding up to 9600 baud!
-Line 8331
+Line 8556
 Line 8331
 Line 8556
  #       alt-charset mode.  Try \EcE\s\s\E+\s if the screen is really clear
  #       then set <msgr>.
  #
  wy120|wyse120|wy150|wyse150|Wyse 120/150,
          am, bw, hs, km, mc5i, mir, msgr, xon,
          cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
          acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
          bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
          cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
          dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
          flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
          hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
          is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
          is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
          kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
          kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
          kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
          kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
          kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
          kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
          mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
          pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
          pfx=\EZ1%p1%{63}%+%c%p2%s\177,
          pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
          rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
          rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
          rs3=\EwG\Ee($<100>,
          sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
          sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
          smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
          tbc=\E0, tsl=\EF, use=adm+sgr,
  #
  wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
          cols#132, lw#7, nlab#16, wsl#97,
          cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
          rs2=\E`;$<70>, use=wy120,
  #
  wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
          lh@, lines#25, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<100>, use=wy120,
  #
  wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
          lh@, lines#25, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
  #
  wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
          bel@, use=wy120,
  #
  wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
          bel@, use=wy120-w,
  #
  #       The Wyse 60 is like the Wyse 50 but with more padding.
  #       The reset strings are slow and the pad times very depending
-Line 8410
+Line 8635
 Line 8410
 Line 8635
  #
  # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
  # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
  wy60|wyse60|Wyse 60,
          am, bw, hs, km, mc5i, mir, msgr,
          cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
          acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
          bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
          cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
          ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
          home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
          ip=$<3>, is1=\EcB0\EcC1,
          is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
          is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
          kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
          kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
          kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
          kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
          kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
          kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
          mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
          pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
          pfx=\EZ1%p1%{63}%+%c%p2%s\177,
          pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
          rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
          rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
          rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
          sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
          sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
          smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
          tbc=\E0, tsl=\EF, use=adm+sgr,
  #
  wy60-w|wyse60-w|wyse 60 132-column,
          cols#132, lw#7, nlab#16, wsl#97,
          cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
          rs2=\EeF$<150>\E`;$<150>, use=wy60,
  #
  wy60-25|wyse60-25|wyse 60 80-column 25-lines,
          lh@, lines#25, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<200>, use=wy60,
  wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
          lh@, lines#25, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
  #
  wy60-42|wyse60-42|wyse 60 80-column 42-lines,
          lines#42,
          clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
          dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
          ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
          ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60,
  wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
          cols#132, lw#7, nlab#16, wsl#97,
          clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
          dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
          nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42,
  #
  wy60-43|wyse60-43|wyse 60 80-column 43-lines,
          lh@, lines#43, lw@, nlab@,
          pln@, rs3=\Ee+$<150>, use=wy60-42,
  wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
          lh@, lines#43, lw@, nlab@,
          pln@, rs3=\Ee+$<150>, use=wy60-42-w,
  #
  wy60-vb|wyse60-vb|Wyse 60 visible bell,
          bel@, use=wy60,
  wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
          bel@, use=wy60-w,
  #       The Wyse-99GT looks at lot like the Wyse 60 except that it
  #       does not have the 42/43 line mode.  In the Wyse-60 the "lines"
-Line 8492
+Line 8717
 Line 8492
 Line 8717
  #       u0 -> enter Tektronix mode
  #       u1 -> exit Tektronix mode
  #
  wy99gt|wyse99gt|Wyse 99gt,
          msgr@,
          clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
          el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
          il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
          ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
          u0=\E~>\E8, u1=\E[42h, use=wy60,
  #
  wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
          cols#132, lw#7, nlab#16, wsl#97,
          clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
          dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>,
          use=wy99gt,
  #
  wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
          lh@, lines#25, lw@, nlab@,
          pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
  #
  wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
          lh@, lines#25, lw@, nlab@,
          pln@, rs2=\E`;$<150>, use=wy99gt-w,
  #
  wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
          bel@, use=wy99gt,
  #
  wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
          bel@, use=wy99gt-w,
  # Can't set tabs! Other bugs (ANSI mode only):
  # - can't redefine function keys (anyway, key redefinition in ANSI mode
-Line 8534
+Line 8759
 Line 8534
 Line 8759
  # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
  # not, so smir and rmir are commented out as well.
  # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
  wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
          am, km, mc5i, mir, msgr, xenl,
          cols#80, it#8, lines#25, vt#3,
          acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
          cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
          cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
          cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
          ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
          enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
          hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
          il1=\E[L, ind=\n$<1>, invis=\E[8m,
          is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
          kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
          kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
          kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
          kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
          kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
          kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
          mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
          rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
          rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
          rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
          sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
          sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
          smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
  #   This is the american terminal. Here tabs work fine.
  # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
  wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
          hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi,
  # This terminal (firmware version 02) has a lot of bugs:
  # - can't set tabs;
-Line 8579
+Line 8804
 Line 8579
 Line 8804
  # speeds handshaking is needed even for character sending. If you use
  # DTR handshaking, you can use even greater speeds.
  # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
  wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
          am, bw, hs, km, mc5i, mir, msgr, xon,
          cols#80, it#8, lines#25, wsl#46,
          acsc='x+y.wi~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
          blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
          cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
          ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
          flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
          ind=^J, invis=\EG3,
          is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
          ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
          kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
          kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
          kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
          kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
          kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
          kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
          nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
          rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
          rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
          sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
          sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
          smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
  # This is the american terminal. Here tabs work.
  # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
  wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
          hts=\E1, tbc=\E0, use=wy99f,
  #
  #       The Wyse 160 is combination of the WY-60 and the WY-99gt.
-Line 8631
+Line 8856
 Line 8631
 Line 8856
  #
  # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
  # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
  wy160|wyse160|Wyse 160,
          am, bw, hs, km, mc5i, mir, msgr,
          cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
          acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
          bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
          cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
          dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
          el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
          hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
          is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
          is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
          kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
          kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
          kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
          kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
          kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
          kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
          mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
          pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
          pfx=\EZ1%p1%{63}%+%c%p2%s\177,
          pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
          rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
          rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
          rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
          sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
          sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
          smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
          tbc=\E0, tsl=\EF, use=adm+sgr,
  #
  wy160-w|wyse160-w|wyse 160 132-column,
          cols#132, lw#7, nlab#16, wsl#90,
          cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
          rs2=\EeF$<150>\E`;$<150>, use=wy160,
  #
  wy160-25|wyse160-25|wyse 160 80-column 25-lines,
          lh@, lines#25, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<200>, use=wy160,
  wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
          lh@, lines#25, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
  #
  wy160-42|wyse160-42|wyse 160 80-column 42-lines,
          lines#42,
          clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
          ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
          rs3=\Ee*$<150>, use=wy160,
  wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
          cols#132, lw#7, nlab#16, wsl#90,
          cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
          rs2=\EeF$<150>\E`;$<150>, use=wy160-42,
  #
  wy160-43|wyse160-43|wyse 160 80-column 43-lines,
          lh@, lines#43, lw@, nlab@,
          pln@, rs3=\Ee+$<150>, use=wy160-42,
  wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
          lh@, lines#43, lw@, nlab@,
          pln@, rs3=\Ee+$<150>, use=wy160-42-w,
  #
  wy160-vb|wyse160-vb|Wyse 160 visible bell,
          bel@, use=wy160,
  wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
          bel@, use=wy160-w,
  #
  #       The Wyse 75 is a vt100 lookalike without advanced video.
  #
-Line 8706
+Line 8931
 Line 8706
 Line 8931
  #       cookies.  The wy75-mc terminal description uses magic cookies
  #       to correctly handle multiple attributes on a screen.
  #
  wy75|wyse75|wyse 75,
          am, hs, mc5i, mir, msgr, xenl, xon,
          cols#80, lines#24, ma#1, pb#1201, wsl#78,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
          cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
          dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
          dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
          ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
          enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
          home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
          ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
          ind=\n$<2>, ip=$<1>,
          is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
          is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K,
          kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
          kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
          kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
          kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
          kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
          khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
          kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
          mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
          rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
          rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
          sc=\E7,
          sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
          smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
          tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad,
  #
  #       This terminal description uses the non-hidden attribute mode
  #       (with magic cookie).
  #
  wy75-mc|wyse75-mc|wyse 75 with magic cookies,
          msgr@,
          ma@, xmc#1,
          blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
          rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
          sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
          sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
          use=wy75,
  wy75-vb|wyse75-vb|wyse 75 with visible bell,
          pb@,
          bel@, use=wy75,
  wy75-w|wyse75-w|wyse 75 in 132 column mode,
          cols#132, wsl#130,
          rs2=\E[35h\E[?3h$<80>, use=wy75,
  wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
          pb@,
          bel@, use=wy75-w,
  #
  #       Wyse 85 emulating a vt220 7 bit mode.
  #               24 line screen with status line.
-Line 8774
+Line 8999
 Line 8774
 Line 8999
  #       <dch> and <ich> work best when XON/XOFF is set.  <ich> and
  #       <dch> leave trash on the screen when used without XON/XOFF.
  #
  wy85|wyse85|wyse 85,
          am, hs, mc5i, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
          dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
          ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
          enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
          fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
          ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
          ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
          is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
          is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~,
          kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
-Line 8803
+Line 9028
 Line 8803
 Line 9028
          rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
          rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
          rs3=\E[?5l, sc=\E7,
          sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
          smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad,
  #
  #       Wyse 85 with visual bell.
  wy85-vb|wyse85-vb|wyse 85 with visible bell,
          bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
  #
  #       Wyse 85 in 132-column mode.
  wy85-w|wyse85-w|wyse 85 in 132-column mode,
          cols#132, wsl#132,
          rs2=\E[35h\E[?3h$<70>, use=wy85,
  #
  #       Wyse 85 in 132-column mode with visual bell.
  wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
          bel@, use=wy85-w,
  # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
  # This copes with an apparent firmware bug in the wy85.  He writes:
-Line 8827
+Line 9052
 Line 8827
 Line 9052
  # (instead of application), and change \E[ to \233 for all the keys in
  # terminfo. At one point, I found some reference indicating that this
  # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
  # me), but I can't find that and the server under my bookmark to "Wyse
  # Technical" isn't responding.  So there's the question of wether the wy85
  # terminfo should reflect the manufactuer's intended behaviour of the terminal
  # or the actual."
  wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
          am, hs, mc5i, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
          dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
          ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
          enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
          fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
          ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
          ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
          is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
          is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
          kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
          kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
          kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
          kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
          kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
          kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
          kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
          khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
          kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
          mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
          rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
          rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
          rs3=\E[?5l, sc=\E7,
          sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
          smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          tsl=\E[40h\E7\E[25;%i%p1%dH,
  #
  #       Wyse 185 emulating a vt320 7 bit mode.
  #
-Line 8877
+Line 9102
 Line 8877
 Line 9102
  #       The Compose Character key can be used as a meta key if changed
  #       by set-up.
  #
  wy185|wyse185|wyse 185,
          am, hs, km, mc5i, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
          dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
          dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
          el=\E[K, el1=\E[1K, enacs=\E)0,
          flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
          home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
          ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
          ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
          is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
          is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP,
          kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
-Line 8906
+Line 9131
 Line 8906
 Line 9131
          lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
          ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
          rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
          rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
          rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
          sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
          smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
          use=vt220+keypad,
  #
  #       Wyse 185 with 24 data lines and top status (terminal status)
  wy185-24|wyse185-24|wyse 185 with 24 data lines,
          hs@,
          dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
          use=wy185,
  #
  #       Wyse 185 with visual bell.
  wy185-vb|wyse185-vb|wyse 185+flash,
          bel@, use=wy185,
  #
  #       Wyse 185 in 132-column mode.
  wy185-w|wyse185-w|wyse 185 in 132-column mode,
          cols#132, wsl#132,
          dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
          ip=$<7>, rs2=\E[35h\E[?3h, use=wy185,
  #
  #       Wyse 185 in 132-column mode with visual bell.
  wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
          bel@, use=wy185-w,
  # wy325 terminfo entries
  # Done by Joe H. Davis        3-9-92
  # lines 25  columns 80
  #
  wy325|wyse325|Wyse epc,
          am, bw, hs, mc5i, mir,
          cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
          acsc=+/\,.0[iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
          bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
          cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
          dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
          flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
          il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
          is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
          is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
          kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
          kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
          kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
          kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
          kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
          kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
          mc0=\EP, mc4=^T, mc5=\Ed#,
          pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
          pfx=\EZ1%p1%{63}%+%c%p2%s\177,
          pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
          rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
          rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
          rs3=\EwG\Ee($<100>,
          sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
          sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
          smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
          tsl=\EF, use=adm+sgr,
  #
  # lines 24  columns 80  vb
  #
  wy325-vb|wyse325-vb|wyse-325 with visual bell,
          bel@, use=wy325,
  #
  # lines 24  columns 132
  #
  wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
          cols#132, lw#7, nlab#16, wsl#97,
          cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
          rs2=\E`;$<70>, use=wy325,
  #
  # lines 25  columns 80
  #
  wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
          lh@, lines#25, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<100>, use=wy325,
  #
  # lines 25  columns 132
  #
  wy325-25w|wyse325-25w|wy325 132 columns,
          lh@, lines#25, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
  #
  # lines 25  columns 132  vb
  #
  wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
          bel@, use=wy325-w,
  #
  # lines 42  columns 80
  #
  wy325-42|wyse325-42|wyse-325 42 lines,
          lh@, lines#42, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<100>, use=wy325,
  #
  # lines 42  columns 132
  #
  wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
          lh@, lines#42, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
  #
  # lines 42  columns 132  vb
  #
  wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
          bel@, use=wy325-w,
  #
  # lines 43  columns 80
  #
  wy325-43|wyse325-43|wyse-325 43 lines,
          lh@, lines#43, lw@, nlab@,
          pln@, use=wy325,
  #
  # lines 43  columns 132
  #
  wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
          lh@, lines#43, lw@, nlab@,
          pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
  #
  # lines 43  columns 132  vb
  #
  wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
          bel@, use=wy325-w,
  #       Wyse 370 -- 24 line screen with status line.
  #
-Line 9053
+Line 9278
 Line 9053
 Line 9278
  #       <u5> -> exit  Tek 4207 mode (goto native ANSI mode)
  #
  # Bug: The <op> capability resets attributes.
  wy370-nk|wyse 370 without function keys,
          am, ccc, hs, mc5i, mir, msgr, xenl, xon,
          colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
          dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
          dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
          el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
          flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
          home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
          ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
          ind=\n$<2>,
          initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
          invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
          is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
          is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
          mc5=\E[5i,
          oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
          op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
          rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
          rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
          rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
          rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
          sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
          smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
          u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
          u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
  #
  #       Function key set for the ASCII (wy-50 compatible) keyboard
  #       This is the default 370.
  #
  wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
          kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
          kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
          kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
          kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
          kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
          knp=\E[U, kpp=\E[V, use=wy370-nk,
  #
  #       Function key set for the VT-320 (and wy85) compatible keyboard
  #
  wy370-105k|Wyse 370 with 105 key keyboard,
          kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
          kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
          kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~,
          kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
          khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
          kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
          use=wy370-nk, use=vt220+keypad,
  #
  #       Function key set for the PC compatible keyboard
  #
  wy370-EPC|Wyse 370 with 102 key keyboard,
          kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
          kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
          kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
          khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk,
  #
  #       Wyse 370 with visual bell.
  wy370-vb|Wyse 370 with visible bell,
          bel@, use=wy370,
  #
  #       Wyse 370 in 132-column mode.
  wy370-w|Wyse 370 in 132-column mode,
          cols#132, wsl#132,
          rs2=\E[35h\E[?3h$<70>, use=wy370,
  #
  #       Wyse 370 in 132-column mode with visual bell.
  wy370-wvb|Wyse 370 with visible bell 132-columns,
          flash=\E[30h\E\,\E[30l$<300>, use=wy370-w,
  wy370-rv|Wyse 370 reverse video,
          rs3=\E[32h\E[?5h, use=wy370,
  #
  #       Wyse 99gt Tektronix 4010/4014 emulator,
  #
  wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
          am, os,
          cols#74, lines#35,
          bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
          cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
          cuu1=^K, ff=^L,
          hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
          home=^]7`x @\037,
          hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
          is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
  #
  #       Wyse 160 Tektronix 4010/4014 emulator,
  #
  wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
          cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
          home=^]8`g @\037, use=wy99gt-tek,
  #
  #       Wyse 370 Tektronix 4010/4014 emulator,
  #
  wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
          am, os,
          cols#80, lines#36,
          bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
          cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
          cuu1=^K, ff=^L,
          hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
          home=^]8g @\037,
          hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
          is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
          nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
  # Vendor-supplied Wyse entries end here.
  #
  #TITLE:  TERMINFO ENTRY WY520
  #DATE:   8/5/93
  # The WY520 terminfo is based on the WY285 entry published on the WYSE
  # BBS with the addition of more function keys and special keys.
  #
  #               rs1 -> set personality
-Line 9198
+Line 9423
 Line 9198
 Line 9423
  #         keypad in Dec application mode which doesn't seem to work
  #         with SCO applications.
  #
  wy520|wyse520|wyse 520,
          am, hs, km, mc5i, mir, xenl, xon,
          cols#80, it#8, lines#24, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
          dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
          ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
          enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
          hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
          il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
          is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
          is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
          kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~,
          kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
          kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
          kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
          kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~,
          kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1,
          lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
          rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l,
          rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m,
          rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
          rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
          sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
          smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
          vpa=\E[%i%p1%dd, use=vt220+keypad,
  #
  #       Wyse 520 with 24 data lines and status (terminal status)
  wy520-24|wyse520-24|wyse 520 with 24 data lines,
          hs@,
          dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
          use=wy520,
  #
  #       Wyse 520 with visual bell.
  wy520-vb|wyse520-vb|wyse 520 with visible bell,
          flash=\E[30h\E\,\E[30l$<100>, use=wy520,
  #
  #       Wyse 520 in 132-column mode.
  wy520-w|wyse520-w|wyse 520 in 132-column mode,
          cols#132, wsl#132,
          dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
          ip=$<7>, rs2=\E[35h\E[?3h, use=wy520,
  #
  #       Wyse 520 in 132-column mode with visual bell.
  wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
          flash=\E[30h\E\,\E[30l$<100>, use=wy520-w,
  #
  #
  #       Wyse 520 emulating a vt420 7 bit mode.
-Line 9263
+Line 9488
 Line 9263
 Line 9488
  #       - Delete : delete a character (have to change interrupt character
  #                  to CTRL-C: stty intr '^c') for it to work since the
  #                  Delete key sends 7FH.
  wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
          kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
          kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
          use=wy520,
  #
  #       Wyse 520 with 24 data lines and status (terminal status)
  #       with EPC keyboard.
  wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
          hs@,
          dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@,
          use=wy520-epc,
  #
  #       Wyse 520 with visual bell.
  wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
          flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc,
  #
  #       Wyse 520 in 132-column mode.
  wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
          cols#132, wsl#132,
          dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
          ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc,
  #
  #       Wyse 520 in 132-column mode with visual bell.
  wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
          flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w,
  #
  #       Wyse 520 in 80-column, 36 lines
  wy520-36|wyse520-36|wyse 520 with 36 data lines,
          hs@,
          lines#36,
          dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
          use=wy520,
  #
  #       Wyse 520 in 80-column, 48 lines
  wy520-48|wyse520-48|wyse 520 with 48 data lines,
          hs@,
          lines#48,
          dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
          use=wy520,
  #
  #       Wyse 520 in 132-column, 36 lines
  wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
          cols#132, wsl#132,
          rs2=\E[?3h,
          rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
          use=wy520-36,
  #
  #       Wyse 520 in 132-column, 48 lines
  wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
          cols#132, wsl#132,
          rs2=\E[?3h,
          rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
          use=wy520-48,
  #
  #
  #       Wyse 520 in 80-column, 36 lines with EPC keyboard
  wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
          hs@,
          lines#36,
          dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@,
          use=wy520-epc,
  #
  #       Wyse 520 in 80-column, 48 lines with EPC keyboard
  wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
          hs@,
          lines#48,
          dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@,
          use=wy520-epc,
  #
  #       Wyse 520 in 132-column, 36 lines with EPC keyboard
  wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
          cols#132, wsl#132,
          rs2=\E[?3h,
          rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|,
          use=wy520-36pc,
  #
  #       Wyse 520 in 132-column, 48 lines with EPC keyboard
  wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
          cols#132, wsl#132,
          rs2=\E[?3h,
          rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|,
          use=wy520-48pc,
  # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
  # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
  # file and we don't know what <hts> is -- esr)
  wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
          OTbs, am,
          cols#80, it#8, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
          dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
          is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
          kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
          rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
          smul=^N,
  wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
          is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
          use=wy75,
  # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
  wy100q|Wyse 100 for Quotron,
          OTbs,
          cols#80, lines#24, xmc#1,
          cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
          is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
          kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr,
  #### Kermit terminal emulations
  #
-Line 9386
+Line 9611
 Line 9386
 Line 9611
  # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
  # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
  # From: greg small <gts@populi.berkeley.edu> 9-25-84
  kermit|standard kermit,
          OTbs,
          cols#80, lines#24,
          clear=\EE, cub1=^H, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
          el=\EK, home=\EH, is2=K0 Standard Kermit  9-25-84\n,
          kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
  kermit-am|standard kermit plus auto-margin,
          am,
          is2=K1 Standard Kermit plus Automatic Margins\n,
          use=kermit,
  # IBMPC Kermit 1.2.
  # Bugs: <ed>, <el>: do not work except at beginning of line!  <clear> does
  # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
  # line).
  # From: greg small <gts@populi.berkeley.edu> 8-30-84
  pckermit|pckermit12|UCB IBMPC Kermit 1.2,
          am,
          lines#25,
          clear=\EH\EJ, ed@, el@,
          is2=K2 UCB IBMPC Kermit 1.2  8-30-84\n, use=kermit,
  # IBMPC Kermit 1.20
  # Cannot use line 25, now acts funny like ansi special scrolling region.
  # Initialization must escape from that region by cursor position to line 24.
  # Cannot use character insert because 1.20 goes crazy if insert at col 80.
  # Does not use :am: because autowrap is lost when kermit dropped and restarted.
  # From: greg small <gts@populi.berkeley.edu> 12-19-84
  pckermit120|UCB IBMPC Kermit 1.20,
          it#8, lines#24,
          cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
          il1=\EL,
          is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20  12-19-84\n,
          rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit,
  # MS-DOS Kermit 2.27 for the IBMPC
  # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
  # Cannot use line 25, now acts funny like ansi special scrolling region.
-Line 9427
+Line 9652
 Line 9427
 Line 9652
  # Reverse video for standout like H19.
  # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
  # From: greg small <gts@populi.berkeley.edu> 3-17-85
  msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
          OTbs, am@,
          cols#80, it#8, lines#24,
          clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
          cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
          home=\EH, ht=^I, il1=\EL,
          is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
          kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
          rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
  # MS-DOS Kermit 2.27 with automatic margins
  # From: greg small <gts@populi.berkeley.edu> 3-17-85
  msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
          am,
          cvvis=\EO\Eq\EG\EvK5,
          is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n,
          use=msk227,
  # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
  # Automatic margins now default.  Use ansi <sgr> for highlights.
  # Define function keys.
  # (msk22714: removed obsolete ":kn#10:" -- esr)
  # From: greg small <gts@populi.berkeley.edu> 3-17-85
  msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
          am,
          bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
          is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
          kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
          kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227,
  # This was designed for a VT320 emulator, but it is probably a good start
  # at support for the VT320 itself.
  # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
  # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
  vt320-k3|MS-Kermit 3.00's vt320 emulation,
          am, eslok, hs, km, mir, msgr, xenl,
          cols#80, it#8, lines#49, pb#9600, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
          flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
          fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
          ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
          is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
          kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
          kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
          kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
          rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
          rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
          rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
          sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
          smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
  # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
  # ACS capabilities from Philippe De Muyter  <phdm@info.ucl.ac.be> 30 May 1996
  # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
  vt320-k311|dec vt320 series as defined by kermit 3.11,
          am, eslok, hs, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
          flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
          ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
          is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
          kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
          lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
          rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
          rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
          rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
          smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
  ######## NON-ANSI TERMINAL EMULATIONS
  #
-Line 9536
+Line 9761
 Line 9536
 Line 9761
  #                               level 0:
  # ^L            -- clear window/reset current attribute to default
  # ^V^A%p1%c     -- set current color attribute, parameter decodes as follows:
  #
  #      bit:         6   5   4   3   2   1   0
  #                   |       |   |   |       |
  #                   +---+---+   |   +---+---+
-Line 9547
+Line 9772
 Line 9547
 Line 9772
  #                               level 0+:
  # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
  # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
  # ^V^L%p1%c%p2%c%p3%c           -- clear p2 lines and p3 cols w/attr %p1
  # ^V^M%p1%c%p2%c%p3%c%p4%c      -- fill p3 lines & p4 cols w/char p2+attr %p1
  # (^V^L and ^V^M set the current attribute as a side-effect.)
  # ^V ^Y <a> [...] <c>   -- repeat pattern. <a> specifies the number of bytes
  #                          in the pattern, <c> the number of times the pattern
-Line 9565
+Line 9790
 Line 9565
 Line 9790
  # ^V^T                  -- change highlight at current cursor poition to %c
  # ^V^U%p1%c%p2%c        -- highlight window <a> with attribute <b>
  # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
  #                       -- define window
  #
  # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
  # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
-Line 9575
+Line 9800
 Line 9575
 Line 9800
  # Update by TD - 2004: half of this was inconsistent.  Found documentation
  # and repaired most of the damage.  sgr0 is probably incorrect, but the
  # available documentation gives no clues for a workable string.
  avatar0|avatar terminal emulator level 0,
          am, bce, msgr,
          cols#80, it#8, lines#25,
          blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
          cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
          ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap,
          rmacs@, rs2=^L,
          sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;,
          sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A,
          use=klone+acs,
  # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
  avatar0+|avatar terminal emulator level 0+,
          dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
  # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
  avatar|avatar1|avatar terminal emulator level 1,
          civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
          rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+,
  #### RBcomm
  #
-Line 9599
+Line 9824
 Line 9599
 Line 9824
  # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
  # '90s), especially in the BBS world, and still has some loyal users due to
  # its very small memory footprint and to a cute macro language.
  rbcomm|IBM PC with RBcomm and EMACS keybindings,
          am, bw, mir, msgr, xenl,
          cols#80, it#8, lines#25,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=^C, cuf1=^B,
          cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W,
          dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I,
          il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m,
          is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
          kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
          rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
          rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
          rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
          smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
  rbcomm-nam|IBM PC with RBcomm without autowrap,
          am@,
          bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
          is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
          kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
  rbcomm-w|IBM PC with RBcomm in 132 column mode,
          cols#132,
          bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
          is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
          kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm,
  ######## LCD DISPLAYS
  #
-Line 9635
+Line 9860
 Line 9635
 Line 9860
  # Command Character is 0xFE (decimal 254, octal 376)
  #
  # On this device, cursor addressability isn't possible.  The LCD expects:
  #      0xfe G <col> <row>
  #      for cup: %p1 == row and %p2 is column
  #
  # This line:
  #       cup=\376G%p2%c%p1%c
  # LOOKS like it will work, but sometimes only one of the two numbers is sent.
  # See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'.
  #
  # Alas, there is no cursor upline capability on this display.
  #
  # These entries add some 'sanity stuff' to the clear function.  That is, it
-Line 9653
+Line 9878
 Line 9653
 Line 9878
  # NOTE: calling 'flash' turns it on and back off (visual bell)
  #
  MtxOrb|Generic Matrix Orbital LCD display,
          bel=\376B^A, clear=\376X\376C\376R\376K\376T,
          cnorm=\376K\376T, cub1=\376L, cuf1=\376M,
          flash=\376B\001$<200>\376F, home=\376H,
  MtxOrb204|20x4 Matrix Orbital LCD display,
          cols#20, lines#4, use=MtxOrb,
  MtxOrb162|16x2 Matrix Orbital LCD display,
          cols#16, lines#2, use=MtxOrb,
  # The end
  ######## OLDER TERMINAL TYPES
-Line 9679
+Line 9904
 Line 9679
 Line 9904
  # These are AT&T's official terminfo entries.  All-caps aliases have been
  # removed.
  #
  att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
          am, eo, mir, msgr, xon,
          cols#80, it#8, lines#24,
          bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
          il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
          kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
          kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
          kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
          kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
          kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
          rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
          smso=\E[7m,
  att2350|AT&T 2350 Video Information Terminal 80 column mode,
          mc0@, mc4@, mc5@, use=att2300,
  # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
  # Seems upward compatible with vt100, plus ins/del line/char.
-Line 9707
+Line 9932
 Line 9707
 Line 9932
  #       bold= reverse + underline = 2 | 3.
  # note that half-bright blinking doesn't look different from normal blinking.
  # NOTE:you must program the function keys first, label second!
  # (att4410: a BSD entry has been seen with the following capabilities:
  # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
  # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
  att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
          am, hs, mir, msgr, xon,
          cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
          acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
          dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
          ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
          is3=\E[1;03q   f1           \EOP\E[2;03q   f2           \EOQ\E[3;03q   f3           \EOR\E[4;03q   f4           \EOS\E[5;03q   f5           \EOT\E[6;03q   f6           \EOU\E[7;03q   f7           \EOV\E[8;03q   f8           \EOW,
          kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
          kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
          ll=\E[24H, nel=^M^J,
          pfx=\E[%p1%1d;%p2%l%2.2dq   f%p1%1d           %p2%s,
          pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
          rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
          sc=\E7,
          sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
          tsl=\E7\E[25;%p1%{1}%+%dH,
  att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
          cols#132, wsl#132,
          is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
  att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
          OTbs,
          pfx=\E[%p1%d;%p2%l%02dq   f%p1%d           %p2%s,
          use=att5410v1,
  att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
          cols#132, wsl#132,
          is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
  # 5410 in terms of a vt100
  # (v5410: added <rmam>/<smam> based on init string -- esr)
  v5410|att5410 in terms of a vt100,
          am, mir, msgr, xon,
          cols#80, it#8, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
          clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=^J, cuf1=\E[C$<2>,
          cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
          dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
          enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
          il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
          kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O,
          rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
          rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
          sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
          sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
          smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
          use=vt100+fnkeys,
  #
  # Teletype Model 5420 -- A souped up 5410, with multiple windows,
  # even! the 5420 has three modes: scroll, window or page mode
  # this terminfo should work in scroll or window mode, but doesn't
-Line 9795
+Line 10020
 Line 9795
 Line 10020
  # <is3> set screen color to black,
  # No representation in terminfo for the delete word key: kdw1=\Ed
  # Key capabilities assume the power-up send sequence...
  # This <rmcup> is not strictly necessary, but it helps maximize
  # memory usefulness: <rmcup=\Ez>,
  # Alternate sgr0:       <sgr0=\E[m\EW^O>,
  # Alternate sgr:        <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
-Line 9804
+Line 10029
 Line 9804
 Line 10029
  # This string causes them to send the strings <kf1>-<kf8>
  # when pressed in SYS PF mode.
  # (att4415: I added <rmam>/<smam> based on the init string -- esr)
  att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
          OTbs, db, mir, xon,
          lh#2, lm#78, lw#8, nlab#8, wsl#55,
          cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
          cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
          cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
          dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
          flash=\E[?5h$<200>\E[?5l, home=\E[x,
          hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
          il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
          is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
          is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
          kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
          kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
          kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
          kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
          lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
          mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
          pfx=\E[%p1%d;%p2%l%02dq   F%p1%d           %p2%s,
          pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
          rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
          rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
          sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
          smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
          tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
          use=att4410,
  att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
          cols#132, lm#54, wsl#97,
          is1=\E[?3h$<100>, use=att4415,
  att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
          flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415,
  att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
          cols#132, lm#54, wsl#97,
          flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h,
          use=att4415,
  # Note that this mode permits programming USER PF KEYS and labels
  # However, when you program user pf labels you have to reselect
  # user pf keys to make them appear!
  att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
          kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
          pfx=\E[%p1%d;%p2%l%02d;0;1q   F%p1%d           %p2%s,
          pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
  att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
          kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
          use=att4415,
  att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
          kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
          use=att4415-rv,
  att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
          kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
          use=att4415-w,
  att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
          kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl,
          use=att4415-w-rv,
  att5420_2|AT&T 5420 model 2 80 cols,
          am, db, hs, mir, msgr, xon,
          cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
          cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
          dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
          dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
          el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
          hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
          ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
          invis=\E[8m,
          is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
          kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
          kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
          kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
          kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
          kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
          lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
          mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
          pfx=\E[%p1%d;%p2%l%02dq   F%p1%d           %p2%s\E~,
          pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
          rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
          rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
          sc=\E7,
          sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
          smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
  att5420_2-w|AT&T 5420 model 2 in 132 column mode,
          cols#132,
          is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
          use=att5420_2,
  att4418|att5418|AT&T 5418 80 cols,
          am, xon,
          cols#80, lines#24,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
          cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
          cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
          ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
          is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@,
          kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
          kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
          kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
          kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
          kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
          rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
          sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
  att4418-w|att5418-w|AT&T 5418 132 cols,
          cols#132,
          is1=\E[?3h, use=att5418,
  att4420|tty4420|teletype 4420,
          OTbs, da, db, eo, msgr, ul, xon,
          cols#80, lines#24, lm#72,
          bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
          dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
          kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
          kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
          lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
          rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
  #  The following is a terminfo entry for the Teletype 4424
  #  asynchronous keyboard-display terminal.  It supports
  #  the vi editor.  The terminal must be set up as follows,
  #
  #       HIGHLIGHT DEFINITION    3-TONE
  #       DISPLAY FUNCTION        GROUP III
  #
  #  The second entry below provides limited (a la adm3a)
  #  operation under GROUP II.
  #
  #  This must be used with DISPLAY FUNCTION GROUP I or III
  #       and HIGHLIGHT DEFINITION 3-TONE
  # The terminal has either bold or blink, depending on options
  #
  # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
  att4424|tty4424|teletype 4424,
          OTbs, am, xon,
          cols#80, lines#24,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
          dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
          ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
          ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
          kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
          khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
          rmul=\EZ,
          sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
          sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
          tbc=\EF,
  att4424-1|tty4424-1|teletype 4424 in display function group I,
          kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
          use=att4424,
  # This entry is not one of AT&T's official ones, it was translated from the
  # 4.4BSD termcap file.  The highlight strings are different from att4424.
-Line 9983
+Line 10208
 Line 9983
 Line 10208
  # The following two lines are the comment originally attached to the entry:
  # This entry appears to avoid the top line - I have no idea why.
  # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
  att4424m|tty4424m|teletype 4424M,
          am, da, db, mir,
          cols#80, it#8, lines#23,
          bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
          dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
          is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
          kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smso=\E[7m, smul=\E[4m,
  # The Teletype 5425 is really version 2 of the Teletype 5420. It
  # is quite similar, except for some minor differences. No page
  # mode, for example, so all of the <cup> sequences used above have
  # to change back to what's being used for the 5410. Many of the
  # option settings have changed their numbering as well.
  #
  # This has been tested on a preliminary model.
  #
  # (att5425: added <rmam>/<smam> based on the init string -- esr)
  att5425|tty5425|att4425|AT&T 4425/5425,
          am, da, db, hs, mir, msgr, xenl, xon,
          cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
          clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
          el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
          flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
          hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
          il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
          invis=\E[8m, is1=\E<\E[?3l$<100>,
          is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
          is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
          kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
          kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
          kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
          kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
          nel=^M^J,
          pfx=\E[%p1%d;%p2%l%02dq   F%p1%1d           %p2%s,
          pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
          rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
          rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
          rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
          sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
          smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
          vpa=\E[%p1%{1}%+%dd,
  att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
          smkx=\E[21;1j\E[25;4j\Eent, use=att4425,
  att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
          cols#132, lm#54, wsl#97,
          is1=\E[?3h$<100>, use=tty5425,
  # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
  # I also added <rmam>/<smam> -- esr)
  att4426|tty4426|teletype 4426S,
          am, da, db, xon,
          cols#80, lines#24, lm#48,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
          cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
          hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
          il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
          is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
          kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
          kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
          nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
          rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
          rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
          smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
          vpa=\E[%p1%dd,
  # Terminfo entry for the AT&T 510 A Personal Terminal
  # Function keys 9 - 16 are available only after the
  # screen labeled (soft keys/action blocks) are labeled.  Function key
  # 9 corresponds to the leftmost touch target on the screen,
  # function key 16 corresponds to the rightmost.
  #
  # This entry is based on one done by Ernie Rice at Summit, NJ and
  # changed by Anne Gallup, Skokie, IL, ttrdc!anne
  att510a|bct510a|AT&T 510A Personal Terminal,
          am, mir, msgr, xenl, xon,
          cols#80, lh#2, lines#24, lw#7, nlab#8,
          acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
          civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
          dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
          el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
          hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
          is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
          kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
          kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
          kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
          mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
          pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
          rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
          sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g,
  # Terminfo entry for the AT&T 510 D Personal Terminal
  # Function keys 9 through 16 are accessed by bringing up the
-Line 10106
+Line 10331
 Line 10106
 Line 10331
  # Function key 9 corresponds to the leftmost touch target on the screen,
  # function key 16 corresponds to the rightmost.
  #
  # There are problems with soft key labeling.  These are due to
  # strangenesses in the native terminal that are impossible to
  # describe in a terminfo.
  att510d|bct510d|AT&T 510D Personal Terminal,
          am, da, db, mir, msgr, xenl, xon,
          cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
          acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
          clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
          cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
          cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
          dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
          el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
          hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
          il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
          invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
          kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
          kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
          kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
          kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
          mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
          pln=\E[%p1%dp%p2%:-16s, rc=\E8,
          rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
          rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
          rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
          rs2=\E[5;0|, sc=\E7,
          sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
          smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
          smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
  # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
  att500|att513|AT&T 513 using page mode,
          am, chts, mir, msgr, xenl, xon,
          cols#80, lh#2, lines#24, lw#8, nlab#8,
          acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
          clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
          csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
          enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
          hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
          indn=\E[%p1%dE, invis=\E[8m,
          is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
          kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
          kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
          kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
          kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
          kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
          kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
          kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
          kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
          kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
          kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
          khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
          kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
          kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
          kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
          ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
          mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
          nel=\EE,
          pfkey=\E[%p1%d;%p2%l%d;3;0p   F%p1%d           %p2%s,
          pfloc=\E[%p1%d;%p2%l%d;2;0p   F%p1%d           %p2%s,
          pfx=\E[%p1%d;%p2%l%d;1;0p   F%p1%d           %p2%s,
          pln=\E[%p1%dp%p2%:-16s, rc=\E8,
          rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
          rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
          rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
          rmul=\E[m,
          rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
          rs2=\E[5;0|, sc=\E7,
          sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smir=\E[4h,
          smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
  # 01-07-88
  # printer must be set to EMUL ANSI to accept ESC codes
-Line 10195
+Line 10420
 Line 10195
 Line 10420
  #       and alt font ascii,wrap on,tabs cleared
  # <is2> disables newline on LF,Emphasized off
  # The <u0> capability sets form length
  att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
          xhpa, xvpa,
          bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
          orhi#100, orl#12, orvi#72,
          cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
          cr=^M,
          csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
          cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
          ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
          lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
          rshm=\E[m,
          scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
          smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
          smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
          u0=\E[%p1%dt, vpa=\E[%p1%dd,
  # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
  # The following SET-UP modes are assumed for normal operation:
-Line 10218
+Line 10443
 Line 10218
 Line 10443
  # requirements.  This termcap description is for the Resident Terminal Mode.
  # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
  # The BRL entry also said: UNSAFE :ll=\E[70H:
  att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
          am, xon,
          cols#88, it#8, lines#70, vt#3,
          bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
          dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
          home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
          il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
          kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
          rs1=\Ec, sc=\E7,
  # 5620 terminfo  (2.0 or later ROMS with char attributes)
  # The following SET-UP modes are assumed for normal operation:
-Line 10242
+Line 10467
 Line 10242
 Line 10467
  # <msgr> is from an otherwise inferior BRL for this terminal.  That entry
  # also has <ll>=\E[70H commented out and marked unsafe.
  # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
  att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
          OTbs, am, msgr, npc, xon,
          cols#88, it#8, lines#70,
          bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
          cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
          dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
          ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
          indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
          pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
          rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
          sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
  att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
          lines#24, use=att5620,
  att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
          lines#34, use=att5620,
  # 5620 layer running the "S" system's downloaded graphics handler:
  att5620-s|tty5620-s|layer|vitty|5620 S layer,
          OTbs, OTpt, am,
          cols#80, it#8, lines#72,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
          cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
          el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
          kll=\E[70;1H,
  # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
  #
  # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
  # keys:  = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
  att605|AT&T 605 80 column 102key keyboard,
          am, eo, xon,
          cols#80, lines#24, lw#8, nlab#8, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
          cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
          dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
          il1=\E[L, ind=^J, invis=\E[8m,
          is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
          kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
          kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
          kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
          kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
          kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
          kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
          kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
          kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
          kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
          kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
          kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
          kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
          mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
          pfx=\E[%p1%d;%p2%l%02dq   F%p1%1d           %p2%s,
          pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
          rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
          rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
          smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
          tsl=\E7\E[25;%i%p1%dx,
  att605-pc|ATT 605 in pc term mode,
          acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
          cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
          dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
          kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
          kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
          kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
          rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
          xonc=e, use=att605,
  att605-w|AT&T 605-w 132 column 102 key keyboard,
          cols#132, wsl#132,
          is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0,
          use=att605,
  # (att610: I added <rmam>/<smam> based on the init string.  I also
  # added <indn> and <rin> because the BSD file says the att615s have them,
  # and the 615 is like a 610 with a big keyboard, and most of their other
  # smart terminals support the same sequence -- esr)
  att610|AT&T 610; 80 column; 98key keyboard,
          am, eslok, hs, mir, msgr, xenl, xon,
          cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
          flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
          ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
          indn=\E[%p1%dS, invis=\E[8m,
          is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
          is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
          kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
          kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
          kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
          kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
          nel=\EE,
          pfx=\E[%p1%d;%p2%l%02dq   F%p1%1d           %p2%s,
          pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
          ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
          rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
          smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
  att610-w|AT&T 610; 132 column; 98key keyboard,
          cols#132, wsl#132,
          is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
          use=att610,
  att610-103k|AT&T 610; 80 column; 103key keyboard,
          kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
          kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
          kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
          kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
          kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
          kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
          kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
          kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
          khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
          knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
          kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
          krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
          kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610,
  att610-103k-w|AT&T 610; 132 column; 103key keyboard,
          cols#132, wsl#132,
          is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
          use=att610-103k,
  att615|AT&T 615; 80 column; 98key keyboard,
          kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
          kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
          kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
          kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
          kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
          kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
          kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610,
  att615-w|AT&T 615; 132 column; 98key keyboard,
          kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
          kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
          kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
          kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
          kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
          kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
          kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w,
  att615-103k|AT&T 615; 80 column; 103key keyboard,
          kLFT=\E[ A, kRIT=\E[ @, use=att610-103k,
  att615-103k-w|AT&T 615; 132 column; 103key keyboard,
          kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w,
  # (att620: I added <rmam>/<smam> based on the init string and
  # <rin>/<indn> from a BSD termcap -- esr)
  att620|AT&T 620; 80 column; 98key keyboard,
          am, eslok, hs, mir, msgr, xenl, xon,
          cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
          flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
          ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
          indn=\E[%p1%dS, invis=\E[8m,
          is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
          is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
          kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
          kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
          kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
          kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
          kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
          kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
          kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
          kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
          kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
          kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
          mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
          pfx=\E[%p1%d;%p2%l%02dq   F%p1%1d           %p2%s,
          pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
          ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
          rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
          rs2=\Ec\E[?3l, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
          smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
          tsl=\E7\E[25;%i%p1%dx,
  att620-w|AT&T 620; 132 column; 98key keyboard,
          cols#132, wsl#132,
          is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
          use=att620,
  att620-103k|AT&T 620; 80 column; 103key keyboard,
          kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
          kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
          kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
          kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
          kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
          kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
          kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
          kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
          kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
          kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
          kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
          kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
          kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
          kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
          kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
          ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620,
  att620-103k-w|AT&T 620; 132 column; 103key keyboard,
          cols#132, wsl#132,
          is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h,
          use=att620-103k,
  # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
  # The following SETUP modes are assumed for normal operation:
-Line 10470
+Line 10695
 Line 10470
 Line 10695
  # port.  This termcap description is for the Fixed Non-Layers Window.  No
  # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
  # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
  att630|AT&T 630 windowing terminal,
          OTbs, am, da, db, mir, msgr, npc, xon,
          cols#80, it#8, lines#60, lm#0,
          bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
          dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
          el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
          il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
          kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
          kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
          kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
          kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
          kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
          mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
          rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
          rmul=\E[m, rs2=\Ec, sc=\E7,
          sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
          sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
  att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
          lines#24, use=att630,
  # This is the att700 entry for 700 native emulation of the AT&T 700
  # terminal.  Comments are relative to changes from the 605V2 entry and
-Line 10503
+Line 10728
 Line 10503
 Line 10728
  #       ESC [ 50;4|     set 700 native mode (really is 605)
  # x     ESC [ 56;ps|    set lines to 24: ps=0; 40: ps=1 (plus status line)
  #       ESC [ 53;0|     set GenFlow to Xon/Xoff
  #       ESC [ 8 ;0|     set CR on NL
  # x     ESC [ ? 3 l/h   set workspace: 80 col(l); 132 col(h)
  #       ESC [ ? 4 l     jump scroll
  #       ESC [ ? 5 l/h   video: normal (l); reverse (h)
  #       ESC [ ?13 l     Labels on
  #       ESC [ ?15 l     parity check = no
-Line 10527
+Line 10752
 Line 10527
 Line 10752
  # and the rmso/smso settings from the 730.
  #
  # Note: For the same reason as above in rmso I changed exit under-score mode
  # to specifically turn off underscore, rather than return to all normal
  # attributes
  #
  # Note: The following pkey_xmit is taken from the 605V2 which contained the
-Line 10571
+Line 10796
 Line 10571
 Line 10796
  # etc..... Available from AT&T CIC 800-432-6600...
  # ask for Document number 999-300-660..
  #
  att700|AT&T 700 24x80 column display w/102key keyboard,
          am, eslok, hs, mir, msgr, xenl, xon,
          cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
          enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
          fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
          il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
          is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
          is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
          kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
          kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
          kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
          kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
          kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
          kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
          kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
          kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
          kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
          kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
          kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
          mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
          pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t   F%p1%1d           %;%p2%s,
          pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
          rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
          rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
          rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
          smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
          tsl=\E7\E[99;%i%p1%dx,
  # This entry was modified 3/13/90 by JWE.
  # fixes include additions of <enacs>, correcting <rep>, and modification
-Line 10616
+Line 10841
 Line 10616
 Line 10841
  # att730 has status line of 80 chars
  # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
  # the <kf25> and up keys are used for shifted system Fkeys
  # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
  # currently the same as <khome> (unshifted HOME or \E[H).  On the 102, 102+1
  # and 122 key keyboards, the 730's translation is \E[2J.  For consistency
  # <kHOM> has been commented out.  The user can uncomment <kHOM> if using the
  # 102, 102+1, or 122 key keyboards
  #       kHOM=\E[2J,
  # (att730: I added <rmam>/<smam> based on the init string -- esr)
  att730|AT&T 730 windowing terminal,
          am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
          cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
          clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
          enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
          home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
          ind=\ED, invis=\E[8m,
          is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
          is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
          kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
          kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
          kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
          kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
          kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
          kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
          kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
          kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
          kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
          kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
          kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
          mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
          pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq   SYS     F%p1%:-2d  %e;0;3q%;%p2%s,
          pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
          pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
          rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
          rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
          rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
          sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
          smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
          swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
  att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
          lines#41, use=att730,
  att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
          lines#24, use=att730,
  att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
          flash=\E[?5l$<200>\E[?5h,
          is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B,
          use=att730,
  att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
          lines#41, use=att730r,
  att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
          lines#24, use=att730r,
  # The following represents the screen layout along with the associated
  # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
-Line 10718
+Line 10943
 Line 10718
 Line 10943
  #
  #                                                          MAIL
  #
  # version 1 note:
  #       The character string sent by key 'kf26' may be user programmable
  #       to send either \E[16s, or \E[26s.
  #       The character string sent by key 'krfr' may be user programmable
-Line 10837
+Line 11062
 Line 10837
 Line 11062
  # 05-Aug-86:
  # The following Terminfo entry describes functions which are supported by
  # the AT&T 5430/pt505 terminal software version 2 and later.
  att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
          am, xon,
          cols#80, it#8, lines#24,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
          cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
          il=\E[%p1%dL, il1=\E[L, ind=^J,
          is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
          kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
          kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
          kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
          kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
          krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
          rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
          rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
          smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
  # The following Terminfo entry describes functions which are supported by
  # the AT&T 5430/pt505 terminal software version 1.
  att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
          lines#24,
          mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
  tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
          lines#22, use=att505,
  #
  #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
  # This cut mark helps make life less painful for people running ncurses tic
-Line 10882
+Line 11107
 Line 10882
 Line 11107
  # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
  # (ampex80: some capabilities merged in from SCO's entry -- esr)
  ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
          OTbs, am, bw, ul,
          cols#80, it#8, lines#24,
          bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
          cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
          ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
          smso=\Ej, smul=\El, tbc=\E3,
  # This entry was from somebody anonymous, Tue Aug  9 20:11:37 1983, who wrote:
  ampex175|ampex d175,
          am,
          cols#80, lines#24,
          bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
          is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
          kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
          rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
  # No backspace key in the main QWERTY cluster. Fortunately, it has a
  # NEWLINE/PAGE key just above RETURN that sends a strange single-character
  # code.  Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
  # mode), this key can be used as the erase key; I find I like this. Because
  # some people and some systems may not, there is another termcap ("ampex175")
  # that suppresses this little eccentricity by omitting the relevant capability.
  ampex175-b|ampex d175 using left arrow for erase,
          kbs=^_, use=ampex175,
  # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
  # (ampex210: removed obsolete ":kn#10:" -- esr)
  ampex210|a210|ampex a210,
          OTbs, am, hs, xenl,
          cols#80, it#8, lines#24, xmc#1,
          cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
          fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
          if=/usr/share/tabset/std, il1=\EE, invis@,
          is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
          kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
          kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
          kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
          tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
  # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
  # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
  # and moved the padding to be *after* the caps -- esr)
  ampex219|ampex-219|amp219|Ampex with Automargins,
          hs, xenl,
          cols#80, it#8, lines#24,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
          clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
          csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
          cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
          cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
          el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
          is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
          kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
          kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
          rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
          rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
          smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
  ampex219w|ampex-219w|amp219w|Ampex 132 cols,
          cols#132, lines#24,
          bel=^G, cr=^M, cud1=^J, ind=^J,
          is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
  # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
  ampex232|ampex-232|Ampex Model 232,
          am,
          cols#80, lines#24, xmc#1,
          cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
          cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
          flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
          invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
          kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
          kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
          kf9=^AI\r, khome=^^, use=adm+sgr,
  # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
  ampex232w|Ampex Model 232 / 132 columns,
          cols#132, lines#24,
          is2=\E\034Eg\El, use=ampex232,
  #### Ann Arbor (aa)
  #
-Line 11091
+Line 11316
 Line 11091
 Line 11316
  #       unused
  #
  annarbor4080|aa4080|ann arbor 4080,
          OTbs, am,
          cols#80, lines#40,
          bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
          cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
          cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
          kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
  # Strange Ann Arbor terminal from BRL
  aas1901|Ann Arbor K4080 w/S1901 mod,
          am,
          cols#80, lines#40,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
          home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
          nel=^M^J,
  # If you're using the GNU termcap library, add
  #       :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
-Line 11116
+Line 11341
 Line 11116
 Line 11341
  #   3. Number of lines below (outside of) desired scroll region.
  #   4. Total number of lines on the screen, the same as the first parameter.
  # The generic Ann Arbor entry is the only one that uses this.
  aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
          OTbs, am, km, mc5i, mir, xon,
          cols#80, it#8,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
          clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
          el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
          hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
          il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
          is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
          kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
          kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
          kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
          kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
          kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
          khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
          mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
          rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
          rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
          rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
          sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
          sgr0=\E[m,
          smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
          smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          vpa=\E[%p1%{1}%+%dd,
  aaa+rv|ann arbor ambassador in reverse video,
          blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
          is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
          rs1=\E[H\E[7m\E[J$<156>,
          sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
          sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
  # Ambassador with the DEC option, for partial vt100 compatibility.
  aaa+dec|ann arbor ambassador in dec vt100 mode,
          acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
          csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
          sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
          smacs=^O,
  aaa-18|ann arbor ambassador/18 lines,
          lines#18,
          is2=\E7\E[60;0;0;18p\E8,
          rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p,
          use=aaa+unk,
  aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
          use=aaa+rv, use=aaa-18,
  aaa-20|ann arbor ambassador/20 lines,
          lines#20,
          is2=\E7\E[60;0;0;20p\E8,
          rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p,
          use=aaa+unk,
  aaa-22|ann arbor ambassador/22 lines,
          lines#22,
          is2=\E7\E[60;0;0;22p\E8,
          rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p,
          use=aaa+unk,
  aaa-24|ann arbor ambassador/24 lines,
          lines#24,
          is2=\E7\E[60;0;0;24p\E8,
          rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p,
          use=aaa+unk,
  aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
          use=aaa+rv, use=aaa-24,
  aaa-26|ann arbor ambassador/26 lines,
          lines#26,
          is2=\E7\E[60;0;0;26p\E8,
          rmcup=\E[60;0;0;26p\E[26;1H\E[K,
          smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
  aaa-28|ann arbor ambassador/28 lines,
          lines#28,
          is2=\E7\E[60;0;0;28p\E8,
          rmcup=\E[60;0;0;28p\E[28;1H\E[K,
          smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
  aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
          eslok, hs,
          lines#29,
          dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
          fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
          rmcup=\E[60;1;0;30p\E[29;1H\E[K,
          smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
          tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
  aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
          use=aaa+rv, use=aaa-30-s,
  aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
          rmcup=\E[60;1;0;30p\E[59;1H\E[K,
          smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
  aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
          rmcup=\E[60;1;0;30p\E[59;1H\E[K,
          smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
  aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
          lines#30,
          is2=\E7\E[60;0;0;30p\E8,
          rmcup=\E[60;0;0;30p\E[30;1H\E[K,
          smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
  aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
          use=aaa+rv, use=aaa-30,
  aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
          rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
          use=aaa-30,
  aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
          rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
          use=aaa+rv, use=aaa-30,
  aaa-36|ann arbor ambassador/36 lines,
          lines#36,
          is2=\E7\E[60;0;0;36p\E8,
          rmcup=\E[60;0;0;36p\E[36;1H\E[K,
          smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
  aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
          use=aaa+rv, use=aaa-36,
  aaa-40|ann arbor ambassador/40 lines,
          lines#40,
          is2=\E7\E[60;0;0;40p\E8,
          rmcup=\E[60;0;0;40p\E[40;1H\E[K,
          smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
  aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
          use=aaa+rv, use=aaa-40,
  aaa-48|ann arbor ambassador/48 lines,
          lines#48,
          is2=\E7\E[60;0;0;48p\E8,
          rmcup=\E[60;0;0;48p\E[48;1H\E[K,
          smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
  aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
          use=aaa+rv, use=aaa-48,
  aaa-60-s|ann arbor ambassador/59 lines+status,
          eslok, hs,
          lines#59,
          dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
          fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
          tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk,
  aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
          use=aaa+rv, use=aaa-60-s,
  aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
          use=aaa+dec, use=aaa+rv, use=aaa-60-s,
  aaa-60|ann arbor ambassador/60 lines,
          lines#60,
          is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8,
          use=aaa+unk,
  aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
          use=aaa+rv, use=aaa-60,
  aaa-db|ann arbor ambassador 30/destructive backspace,
          OTbs@,
          cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
  guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
          lines#33,
          flash=\E[>59h$<100>\E[>59l,
          is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
          rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk,
  guru+rv|guru changes for reverse video,
          flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
  guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
          use=guru+rv, use=guru-33,
  guru+s|guru status line,
          eslok, hs,
          dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
          rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
          tsl=\E[>51h\E[1;%p1%dH\E[2K,
  guru-nctxt|guru with no saved context,
          smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
  guru-s|guru-33-s|ann arbor guru/33 lines+status,
          lines#32,
          is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
          smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
  guru-24|ann arbor guru 24 lines,
          cols#80, lines#24,
          is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p,
          use=guru+unk,
  guru-44|ann arbor guru 44 lines,
          cols#97, lines#44,
          is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p,
          use=guru+unk,
  guru-44-s|ann arbor guru/44 lines+status,
          lines#43,
          is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
          smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
  guru-76|guru with 76 lines by 89 cols,
          cols#89, lines#76,
          is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p,
          use=guru+unk,
  guru-76-s|ann arbor guru/76 lines+status,
          cols#89, lines#75,
          is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
          smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
  guru-76-lp|guru-lp|guru with page bigger than line printer,
          cols#134, lines#76,
          is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p,
          use=guru+unk,
  guru-76-w|guru 76 lines by 178 cols,
          cols#178, lines#76,
          is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p,
          use=guru+unk,
  guru-76-w-s|ann arbor guru/76 lines+status+wide,
          cols#178, lines#75,
          is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
          smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk,
  guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
          cols#178, lines#76,
          is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p,
          use=guru+unk,
  aaa-rv-unk|ann arbor unknown type,
          lh#0, lw#0, nlab#0,
          blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
          is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
          rs1=\E[H\E[7m\E[J,
          sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
          sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
  #### Applied Digital Data Systems (adds)
  #
-Line 11341
+Line 11566
 Line 11341
 Line 11566
  #       Fax: (516)-342-7378
  #       Web: http://boundless.com
  #
  # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
  # In 1995 Boundless acquired DEC's terminals business.
  #
  # Regent: lowest common denominator, works on all regents.
  # (regent: renamed ":bc:" to ":le:" -- esr)
  regent|Adds Regent Series,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
          home=\EY\s\s, ind=^J, ll=^A,
  # Regent 100 has a bug where if computer sends escape when user is holding
  # down shift key it gets confused, so we avoid escape.
  regent100|Adds Regent 100,
          xmc#1,
          bel=^G,
          cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
          kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
          kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
          lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
          sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent,
  regent20|Adds Regent 20,
          bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK,
          use=regent,
  regent25|Adds Regent 25,
          bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A,
          use=regent20,
  regent40|Adds Regent 40,
          xmc#1,
          bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
          kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
          kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
          lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
          smul=\E0`, use=regent25,
  regent40+|Adds Regent 40+,
          is2=\EB, use=regent40,
  regent60|regent200|Adds Regent 60,
          dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
          rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
          use=regent40+,
  # From: <edward@onyx.berkeley.edu> Thu Jul  9 09:27:33 1981
  # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
  viewpoint|addsviewpoint|adds viewpoint,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
          cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
          cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
          ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
          kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
          rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
  # Some viewpoints have bad ROMs that foo up on ^O
  screwpoint|adds viewpoint with ^O bug,
          cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
  # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
  # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
  # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
  # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
  # invis=01000100 and %c is the logical or of desired attributes.
-Line 11451
+Line 11676
 Line 11451
 Line 11676
  # Underlined Half Intensity
  #    Blinking                     c     0143
  # Video suppress                  D     0104
  vp3a+|viewpoint3a+|adds viewpoint 3a+,
          am, bw,
          cols#80, it#8, lines#24,
          blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M,
          cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E),
-Line 11462
+Line 11687
 Line 11462
 Line 11687
          nel=^M^J, rev=\E0P\E), rmso=\E(,
          sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;,
          sgr0=\E(, smso=\E0Q\E), smul=\E0`\E),
  vp60|viewpoint60|addsvp60|adds viewpoint60,
          use=regent40,
  #
  # adds viewpoint 90 - from cornell
  # Note:  emacs sends ei occasionally to insure the terminal is out of
-Line 11475
+Line 11700
 Line 11475
 Line 11700
  #   -    <clear=\EG\Ek>: clears screen and visual attributes without affecting
  #               the status line
  # Function key and label capabilities merged in from SCO.
  vp90|viewpoint90|adds viewpoint 90,
          OTbs, bw, msgr, xhp,
          cols#80, lines#24,
          clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
          dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
          ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
          kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
          kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
          kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
          lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
          lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
          sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
  # Note: if return acts weird on a980, check internal switch #2
  # on the top chip on the CONTROL pc board.
  adds980|a980|adds consul 980,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
          cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
          dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
          kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
          kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
  #### C. Itoh Electronics
  #
-Line 11509
+Line 11734
 Line 11509
 Line 11734
  # CIT 80  - vt-52 emulator, the termcap has been modified to remove
  #           the delay times and do an auto tab set rather than the indirect
  #           file used in vt100.
  cit80|cit-80|citoh 80,
          OTbs, am,
          cols#80, lines#24,
          clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
          cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
          ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
          kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
  # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
  # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
  cit101|citc|C.itoh fast vt100,
          OTbs, am, xenl,
          cols#80, lines#24,
          bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
          dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
          flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
          is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
          smul=\E[4m,
  # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
  # The following termcap entry was created from the Callan cd100 entry.  The
  # last two lines (with the capabilities in caps) are used by RM-cobol to allow
-Line 11537
+Line 11762
 Line 11537
 Line 11762
  # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
  # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
  # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
  cit101e|C. Itoh CIT-101e,
          OTbs, OTpt, am, mir, msgr,
          cols#80, it#8, lines#24,
          acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
          cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
          cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
          el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
          kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
          rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
          smkx=\E=, smso=\E[7m, smul=\E[4m,
  # From: David S. Lawyer, June 1997:
  # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
  # Terminals in Irvine, CA.  It was part of CITOH Electronics.  In the
-Line 11563
+Line 11788
 Line 11563
 Line 11788
  # terminal.  Then change any options you want (provided that they are
  # compatible with the termcap).  For my terminal I set: Screen
  # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
  # on.  I also set up mine for parity (but you may not need it).  Then
  # save the setup with ^S.
  # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
  cit101e-rv|Citoh CIT-101e (sets reverse video),
          am, eo, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24,
          OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
          civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
          home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
          ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
          is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
          kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
          rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
          rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
          sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
          smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
          u7=\E[6n, u8=\E[?6c, u9=\E[c,
  cit101e-n|CIT-101e w/o am,
          am@,
          cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
          use=cit101e,
  cit101e-132|CIT-101e with 132 cols,
          cols#132,
          kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
  cit101e-n132|CIT-101e with 132 cols w/o am,
          am@,
          cols#132,
          cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J,
          use=cit101e,
  # CIE Terminals CIT-500 from BRL
  # The following SET-UP modes are assumed for normal operation:
  #       GENERATE_XON/XOFF:YES   DUPLEX:FULL             NEWLINE:OFF
-Line 11609
+Line 11834
 Line 11609
 Line 11834
  # by the "reset", "tset", or "tabs" utilities.  No delays are specified; use
  # "stty ixon -ixany" to enable DC3/DC1 flow control!
  # (cit500: I added <rmam>/<smam> based on the init string -- esr)
  cit500|CIE Terminals CIT-500,
          OTbs, OTpt, mir, msgr, xon,
          OTkn#10, cols#80, it#8, lines#64, vt#3,
          acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
          clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
          il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
          kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
          ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
          kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
          khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
          lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
          lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
          ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
          rmso=\E[m, rmul=\E[m,
          rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
          sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
          smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
  # C. Itoh printers begin here
  citoh|ci8510|8510|c.itoh 8510a,
          cols#80, it#8,
          bold=\E!, cub1@,
          is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
          rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
          smul=\EX, use=lpr,
  citoh-pica|citoh in pica,
          is1=\EN, use=citoh,
  citoh-elite|citoh in elite,
          cols#96,
          is1=\EE,
          is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089.,
          use=citoh,
  citoh-comp|citoh in compressed,
          cols#136,
          is1=\EQ,
          is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129.,
          use=citoh,
  # citoh has infinite cols because we don't want lp ever inserting \n\t**.
  citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
          cols#32767,
          is1=\EP, use=citoh,
  citoh-6lpi|citoh in 6 lines per inch mode,
          is3=\EA, use=citoh,
  citoh-8lpi|citoh in 8 lines per inch mode,
          lines#88,
          is3=\EB, use=citoh,
  #### Control Data (cdc)
  #
  cdc456|cdc 456 terminal,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
          el=^V, home=^Y, il1=\EL, ind=^J,
  # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
  cdc721|CDC Viking,
          OTbs, am,
          cols#80, lines#24,
          clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
          cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
          kcuu1=^W, khome=^Y,
  cdc721ll|CDC Vikingll,
          OTbs, am,
          cols#132, lines#24,
          clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
          cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
          kcuu1=^W, khome=^Y,
  # (cdc752: the BRL entry had :ll=\E1  ^Z: commented out
  cdc752|CDC 752,
          OTbs, am, bw, xhp,
          cols#80, lines#24,
          bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
          cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
          home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1  \030\002\003\017,
  # CDC 756
  # The following switch/key settings are assumed for normal operation:
  #       96 chars        SCROLL          FULL duplex     not BLOCK
  # Other switches may be set according to communication requirements.
  # Insert/delete-character cannot be used, as the whole display is affected.
  # "so" & "se" are commented out until jove handles "sg" correctly.
  cdc756|CDC 756,
          OTbs, am, bw,
          OTkn#10, cols#80, lines#24,
          bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
          cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
          dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
          kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
          kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
          kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
          khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
          lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
          rs1=\031\030\002\003\017,
  #
  # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
  #
  # Part of the long initialization string defines the "DOWN" key to the left
  # of the tab key to send an ESC.  The real ESC key is positioned way out
  # in right field.
  #
  # The termcap won't work in 132 column mode due to the way it it moves the
-Line 11720
+Line 11945
 Line 11720
 Line 11945
  # handle the 721 in 132 column mode.
  #
  # (cdc721: changed :ri: to :sr: -- esr)
  cdc721-esc|Control Data 721,
          OTbs, OTpt, am, bw, msgr, xon,
          OTkn#10, cols#80, it#8, lines#30,
          bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
          cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
          dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
          ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
          is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
          kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
          kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
          kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
          ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
          sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
          smso=^^D, smul=^\, tbc=^^^RY,
  #### Getronics
  #
  # Getronics is a Dutch electronics company that at one time was called
  # `Geveke' and made async terminals; but (according to the company itself!)
  # they've lost all their documentation on the command set.  The hardware
  # documentation suggests the terminals were actually manufactured by a
-Line 11757
+Line 11982
 Line 11757
 Line 11982
  # non-conformant (but more featureful) ANSI mode.
  #
  # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
  visa50|geveke visa 50 terminal in ansi 80 character mode,
          bw, mir, msgr,
          cols#80, lines#25,
          acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
          blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
          dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
          hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
          il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
          is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
          ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
          kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
          kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
          kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
          kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
          lf3=A insert line, lf4=A delete line, lf5=A clear,
          lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
          lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
          rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
          rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
          smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
          vpa=\E[%i%p1%dd,
  #### Human Designed Systems (Concept)
  #
-Line 11791
+Line 12016
 Line 11791
 Line 12016
  #       Vox: (610)-277-8300
  #       Fax: (610)-275-5739
  #       Net: support@hds.com
  #
  # John Martin <john@hds.com> is their termcap expert.  They're mostly out of
  # the character-terminal business now (1995) and making X terminals.  In
  # particular, the whole `Concept' line described here was discontinued long
-Line 11804
+Line 12029
 Line 11804
 Line 12029
  #
  # There seem to be a number of different versions of the C108 PROMS
  # (with bug fixes in its Z-80 program).
  #
  # The first one that we had would lock out the keyboard of you
  # sent lots of short lines (like /usr/dict/words) at 9600 baud.
  # Try that on your C108 and see if it sends a ^S when you type it.
  # If so, you have an old version of the PROMs.
  #
  # You should configure the C108 to send ^S/^Q before running this.
  # It is much faster (at 9600 baud) than the c100 because the delays
  # are not fixed.
  # new status line display entries for c108-8p:
  # <is3> - init str #3 - setup term for status display -
  # set programmer mode, select window 2, define window at last
  # line of memory, set bkgnd stat mesg there, select window 0.
  #
  # <tsl> - to status line - select window 2, home cursor, erase to
  # end-of-window, 1/2 bright on, goto(line#0, col#?)
  #
  # <fsl> - from status line - 1/2 bright off, select window 0
  #
  # <dsl> - disable status display - set bkgnd status mesg with
  # illegal window #
  #
  # There are probably more function keys that should be added but
  # I don't know what they are.
  #
  # No delays needed on c108 because of ^S/^Q handshaking
  #
  c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
          is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev  \001\177p\Ep\n,
          rmcup=\Ev  \001\177p\Ep\r\n, use=c108-4p,
  c108-4p|concept108-4p|concept 108 w/4 pages,
          OTbs, eslok, hs, xon,
          pb@,
          acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
          cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
          cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
          ind=^J, is1=\EK\E!\E F,
          is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev  \001 p\Ep\n,
          rmacs=\Ej\s, rmcup=\Ev  \001 p\Ep\r\n, smacs=\Ej!,
          smcup=\EU\Ev  8p\Ep\r\E\025,
          tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
  c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
          rmcup=\Ev  \002 p\Ep\r\n, smcup=\EU\Ev  8p\Ep\r,
          use=c108-rv-4p,
  c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
          flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
          use=c108-4p,
  c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
          cols#132,
          is1=\E F\E", rmcup=\Ev  ^A0\001D\Ep\r\n,
          smcup=\EU\Ev  8\001D\Ep\r, use=c108-8p,
  # Concept 100:
  # These have only window relative cursor addressing, not screen
  # relative. To get it to work right here, smcup/rmcup (which
  # were invented for the concept) lock you into a one page
  # window for screen style programs.
  #
  # To get out of the one page window, we use a clever trick:
  # we set the window size to zero ("\Ev    " in rmcup) which the
  # terminal recognizes as an error and resets the window to all
  # of memory.
  #
  # This trick works on c100 but does not on c108, sigh.
  #
  # Some tty drivers use cr3 for concept, others use nl3, hence
  # the delays on cr and ind below. This padding is only needed at
  # 9600 baud and up.  One or the other is commented out depending on
  # local conventions.
  #
  # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
  # less than 6 but more than 2 will work.
  #
  # Note: can't use function keys f7-f10 because they are
  # indistinguishable from arrow keys (!), also, del char and
  # clear eol use xon/xoff so they probably won't work very well.
  #
  # Also note that we don't define insrt/del char/delline/eop/send
  # because they don't transmit unless we reset them - I figured
  # it was a bad idea to clobber their definitions.
  #
  # The <mc5> sequence changes the escape character to ^^ so that
  # escapes will be passed through to the printer. Only trouble
  # is that ^^ won't be - ^^ was chosen to be unlikely.
  # Unfortunately, if you're sending raster bits through to be
  # plotted, any character you choose will be likely, so we lose.
  #
  # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
  # cannot be # in is2 because it will hang a c100 with no printer
  # if sent twice.
  c100|concept100|concept|c104|c100-4p|hds concept 100,
          OTbs, am, eo, mir, ul, xenl,
          cols#80, lines#24, pb#9600, vt#8,
          bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
          cub1=^H, cud1=^J, cuf1=\E=,
          cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
          dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
          ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
          ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
          is1=\EK,
          is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
          is3=\Ev    $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
          kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
          kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
          kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
          khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
          kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
          mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
          rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
          rmcup=\Ev    $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
          rmso=\Ed, rmul=\Eg, sgr0=\EN@,
          smcup=\EU\Ev  8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
          smso=\ED, smul=\EG,
  c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
          cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
          smso=\EE, use=c100,
  oc100|oconcept|c100-1p|old 1 page concept 100,
          in,
          is3@, use=c100,
  # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
  # Lots of notes, originally inline, but ncurses doesn't grok that.
-Line 12076
+Line 12301
 Line 12076
 Line 12301
  #
  #------- flash=\E[8;3!}^G\E[3;3!}
  #------- flash=\E[?5h$<100>\E[?5l
  # There are two ways to flash the screen, both of which have their drawbacks.
  # The first is to set the bell mode to video, transmit a bell character, and
  # set the bell mode back - but to what?  There is no way of knowing what the
  # user's old bell setting was before we messed with it.  Worse, the command to
-Line 12100
+Line 12325
 Line 12100
 Line 12325
  #
  #-------   dim=                 Not available in power on mode.
  # You have a choice of defining low intensity characters as "half bright" and
  # high intensity as "normal", or defining low as "normal" and high as "bold".
  # No matter which you choose, only one of either "half bright" or "bold" is
  # available at any time, so taking the time to override the default is
  # pointless.
-Line 12129
+Line 12354
 Line 12129
 Line 12354
  #        [DEL chosen as delimiter, but could be any character]
  #        [implied:              ELSE    do nothing]
  #               %;              ENDIF
  #
  #-------   rs2=
  # Not defined since anything it might do could be done faster and easier with
  # either Meta-Shift-Reset or the main power switch.
-Line 12163
+Line 12388
 Line 12163
 Line 12388
  #        (which does duplicate printed data on the screen, in which case mc4=
  #        and mc5= should use the \E[?4i and \E[?5i strings instead).
  hds200|Human Designed Systems HDS200,
          am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, lm#0,
          acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
          blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
          clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
          fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
          ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
          invis=\E[0;8m,
          is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
          kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
          kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
          kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
          kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
          kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
          kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
          kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
          kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
          kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
          kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
          kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
          kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
          kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
          kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
          mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
          rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
          rmul=\E[m\017, sc=\E7,
          sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
          smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
          vpa=\E[%i%p1%dd,
  # <ht> through <el> included to specify padding needed in raw mode.
  # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
  avt-ns|concept avt no status line,
          OTbs, am, eo, mir, ul, xenl, xon,
          cols#80, it#8, lines#24, lm#192,
          acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
          clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
          dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
          hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
          ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
          invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
          is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
          kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
          kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
          mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
          pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
          prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
          ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
          rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
          sc=\E7,
          sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
          sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
          smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
  avt-rv-ns|concept avt in reverse video mode/no status line,
          flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
          use=avt-ns,
  avt-w-ns|concept avt in 132 column mode/no status line,
          is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
          use=avt-ns,
  avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
          flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
          smcup=\E[H\E[1;24;1;132w, use=avt-ns,
  # Concept AVT with status line. We get the status line using the
  # "Background status line" feature of the terminal. We swipe the
-Line 12248
+Line 12473
 Line 12248
 Line 12473
  # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
  # assumes an 8 page AVT but lm isn't currently used anywhere.)
  #
  avt+s|concept avt status line changes,
          eslok, hs,
          lm#191,
          dsl=\E[0*w, fsl=\E[1;1!w,
          is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
          rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
          tsl=\E[2;1!w\E[;%p1%dH\E[2K,
  avt|avt-s|concept-avt|avt w/80 columns,
          use=avt+s, use=avt-ns,
  avt-rv|avt-rv-s|avt reverse video w/sl,
          flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
          use=avt+s, use=avt-ns,
  avt-w|avt-w-s|concept avt 132 cols+status,
          is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
          use=avt+s, use=avt-ns,
  avt-w-rv|avt-w-rv-s|avt wide+status+rv,
          flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
          smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns,
  #### Contel Business Systems.
  #
  # Contel c300 and c320 terminals.
  contel300|contel320|c300|Contel Business Systems C-300 or C-320,
          am, in, xon,
          cols#80, lines#24, xmc#1,
          bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
          dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
          el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
          hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
          kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
          kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
          rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
  # Contel c301 and c321 terminals.
  contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
          flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
          use=contel300,
  #### Data General (dg)
  #
-Line 12295
+Line 12520
 Line 12295
 Line 12520
  #
  # DG terminals have function keys that respond to the SHIFT and CTRL keys,
  # e.g., SHIFT-F1 generates a different code from F1.  To number the keys
  # sequentially, first the unmodified key codes are listed as F1 through F15.
  # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
  # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
  # F46 through F60.  This is done in the private "includes" below whose names
-Line 12311
+Line 12536
 Line 12311
 Line 12536
  # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
  # Ctrl/Shift fdkeys (kf34-kf44).
  dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
          ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
          kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
          kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
          kf11=\233011z, kf12=\233012z, kf13=\233013z,
          kf14=\233014z, kf15=\233000z, kf16=\233101z,
          kf17=\233102z, kf18=\233103z, kf19=\233104z,
          kf2=\233002z, kf20=\233105z, kf21=\233106z,
          kf22=\233107z, kf23=\233108z, kf24=\233109z,
          kf25=\233110z, kf26=\233111z, kf27=\233112z,
          kf28=\233113z, kf29=\233114z, kf3=\233003z,
          kf30=\233100z, kf31=\233201z, kf32=\233202z,
          kf33=\233203z, kf34=\233204z, kf35=\233205z,
          kf36=\233206z, kf37=\233207z, kf38=\233208z,
          kf39=\233209z, kf4=\233004z, kf40=\233210z,
          kf41=\233211z, kf42=\233212z, kf43=\233213z,
          kf44=\233214z, kf45=\233200z, kf46=\233301z,
          kf47=\233302z, kf48=\233303z, kf49=\233304z,
          kf5=\233005z, kf50=\233305z, kf51=\233306z,
          kf52=\233307z, kf53=\233308z, kf54=\233309z,
          kf55=\233310z, kf56=\233311z, kf57=\233312z,
          kf58=\233313z, kf59=\233314z, kf6=\233006z,
          kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
          khome=\233H, kprt=\233i,
  dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
          ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
          kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
          kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
          kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
          kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
          kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
          kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
          kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
          kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
          kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
          kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
          kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
          kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
          kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
          kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
          kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
          kf9=\E[009z, khome=\E[H, kprt=\E[i,
  dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
          kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
          kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
          kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
          kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
          kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
          kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
          kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
          kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
          kf8=^^x, kf9=^^y, khome=^H,
  dgkeys+15|Private entry describing 15 DG mode special keys,
          kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
          kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
          kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
          kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
          kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
          kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
          kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
          kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
          kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&,
          kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
          kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
          kf9=^^y,
  # Data General color terminals use the "Tektronix" color model.  The total
  # number of colors varies with the terminal model, as does support for
-Line 12391
+Line 12616
 Line 12391
 Line 12616
  #               Default is ACM mode.
  #       u8=^^F}20^^Fi^^F}21,
  #
  dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
          bce,
          colors#16, ncv#53, pairs#256,
          op=\036Ad\036Bd,
          setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
          setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
          setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
  dg+fixed|Fixed color info for DG D430C terminals in DG mode,
          use=dgunix+fixed,
  # Video attributes are coordinated using static variables set by "sgr", then
  # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
  # (D=dim, U=underline, B=blink, R=reverse.)
  dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
          bce,
          colors#8, ncv#16, pairs#64,
          op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
          setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
          setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
          setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
          setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
  dg+color|Color info for Data General D470C terminals in ANSI mode,
          colors#16, ncv#53, pairs#256,
          setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
          setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
          setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
          setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
          use=dg+color8,
  dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
          bce,
          colors#8, ncv#16, pairs#64,
          op=\036Ad\036Bd,
          setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
          setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
          setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
  dgmode+color|Color info for Data General D470C terminals in DG mode,
          colors#16, pairs#256,
          setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
          setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
          use=dgmode+color8,
  dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
          bce, ccc,
          colors#52, ncv#53, pairs#26,
          initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X,
          oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
          op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
          scp=\036RG2%p1%02X,
  # Colors are in the order:  normal, reverse, dim, dim + reverse.
  dg+ccc|Configurable color info for DG D430C terminals in DG mode,
          bce, ccc,
          colors#52, ncv#53, pairs#26,
          initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
          oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
          op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
          scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
  # The generic DG terminal type (an 8-bit-clean subset of the 6053)
  # Initialization string 1 sets:
  #       ^R              - vertical scrolling enabled
  #       ^C              - blinking enabled
  dg-generic|Generic Data General terminal in DG mode,
          am, bw, msgr, xon,
          cols#80, lines#24,
          bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
          cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
          mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
          smul=^T, use=dgkeys+11,
  # According to the 4.4BSD termcap file, the dg200 <cup> should be the
  # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
  # notation that's "^P%r%+\200%+\200").  Those \200s are suspicious,
  # maybe they were originally nuls (which would fit).
  dg200|data general dasher 200,
          OTbs, am, bw,
          cols#80, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
          cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
          kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
          kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
          kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
          smso=^^D, smul=^T,
  # Data General 210/211 (and 410?)       from Lee Pearson (umich!lp) via BRL
  dg210|dg-ansi|Data General 210/211,
          am,
          cols#80, lines#24,
          OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
          cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
          nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m,
          smul=\E[4;m,
  # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
  # courtesy of Carlos Rucalde of Vantage Software, Inc.
  # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
  # I suspect the d200 function keys actually work on the dg211, check it out.)
  dg211|Data General d211,
          cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
          kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
          rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200,
  # dg450 from Cornell (not official)
  dg450|dg6134|data general 6134,
          cub1@, cuf1=^X, use=dg200,
  # Not official...
  # Note: lesser Dasher terminals will not work with vi because vi insists upon
-Line 12512
+Line 12737
 Line 12512
 Line 12737
  # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
  # grounds that there is no matching ":ml:"
  # fixed garbled ":k9=\E[00\:z:" capability -- esr)
  dg460-ansi|Data General Dasher 460 in ANSI-mode,
          OTbs, am, msgr, ul,
          cols#80, it#8, lines#24,
          OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
          cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
          dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
          ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
          kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
          kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
          lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
          ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
          smul=\E[4m,
  # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
  # Data General 605x
  # Ought to work for a Model 6242, Type D210 as well as a 605x.
  # Note that the cursor-down key transmits ^Z.  Job control users, beware!
  # This also matches a posted description of something called a `Dasher 100'
  # so there's a dg100 alias here.
  # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
  dg6053-old|dg100|data general 6053,
          OTbs, am, bw, ul,
          cols#80, lines#24,
          OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
          cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
          home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
          kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
          kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
          rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
          smul=^T,
  # (Some performance can be gained over the generic DG terminal type)
  dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
          xon@,
          home=^P\0\0, ll=^P\0^W, use=dg-generic,
  # Like 6053, but adds reverse video and more keypad and function keys.
  d200|d200-dg|Data General DASHER D200,
          bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
          sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
          sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15,
          use=dg6053,
  # DASHER D210 series terminals in ANSI mode.
  #       Reverse video, no insert/delete character/line, 7 bits/character only.
-Line 12563
+Line 12788
 Line 12563
 Line 12788
  #       <0              - scrolling enabled
  #       <1              - blink enabled
  #       <4              - print characters regardless of attributes
  d210|d214|Data General DASHER D210 series,
          am, bw, msgr, xon,
          cols#80, lines#24,
          bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
          el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
          ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
          sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
          sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b,
  # DASHER D210 series terminals in DG mode.
  # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
  d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
          xon,
          ed=^^FF, use=d200-dg,
  # DASHER D211 series terminals in ANSI mode.
  # Like the D210, but with 8-bit characters and local printer support.
-Line 12592
+Line 12817
 Line 12592
 Line 12817
  #       \E)4            - default secondary character set (international)
  #       ^O              - primary character set
  #
  d211|d215|Data General DASHER D211 series,
          km,
          is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b,
          use=d210,
  # Initialization string 2 sets:
  #       \E[2;0;1;0v
-Line 12603
+Line 12828
 Line 12603
 Line 12828
  #               1;0     - 7 bit (native) keyboard language
  #       \E(0            - default character set (the keyboard native language)
  #       ^O              - primary character set
  d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
          km@,
          is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
  # Like the D210 series, but adds support for 8-bit characters.
  #
-Line 12615
+Line 12840
 Line 12615
 Line 12840
  #       ^^O     - primary character set
  #       ^^FS00  - default character set (matching the native keyboard language)
  #
  d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
          km,
          rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
  d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
          use=d211-dg,
  # Enhanced DG mode with changes to be more UNIX compatible.
  d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
          mc5i,
          it#8,
          acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
          clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
          el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
          is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
          kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
          kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
          mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
          rs2=\036N\036FS0E\036O\036FS00,
          sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
          sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
          vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg,
  d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
          lines#25,
          is3=\036Fz2, use=d216+,
  d217-unix|Data General DASHER D217 in DG-UNIX mode,
          use=d216-unix,
  d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
          use=d216-unix-25,
  # DASHER D220 color terminal in ANSI mode.
  # Like the D470C but with fewer colors and screen editing features.
-Line 12658
+Line 12883
 Line 12658
 Line 12883
  # Reset string 1 sets:
  #       \Ec             - initial mode defaults (RIS)
  #
  d220|Data General DASHER D220,
          mc5i@,
          dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
          use=dg+color8, use=d470c,
  d220-7b|Data General DASHER D220 in 7 bit mode,
          mc5i@,
          dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec,
          use=dg+color8, use=d470c-7b,
  # Initialization string 3 sets:
  #       - default cursor (solid rectangle)
-Line 12676
+Line 12901
 Line 12676
 Line 12901
  #       ^^O     - primary character set
  #       ^^FS00  - default character set (matching the native keyboard language)
  #
  d220-dg|Data General DASHER D220 color terminal in DG mode,
          mc5i@,
          dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
          rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8,
          use=d470c-dg,
  # DASHER D230C color terminal in ANSI mode.
  # Like the D220 but with minor ANSI compatibility improvements.
  #
  d230c|d230|Data General DASHER D230C,
          blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
          rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
          sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
          sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
          smul=\E[4;50m, use=dgkeys+7b, use=d220,
  d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
          use=d220-dg,
  # DASHER D400/D450 series terminals.
  # These add intelligent features like insert/delete to the D200 series.
-Line 12714
+Line 12939
 Line 12714
 Line 12939
  #       ^^F]            - horizontal scrolling disabled
  #       ^^FT0           - jump scrolling
  #
  d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
          mc5i,
          acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
          cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
          enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
          ich1=^^J, il1=^^FH,
          is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
          ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
          rs1=^^FA, rs2=\036F]\036FT0,
          sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
          sgr0=\017\025\035\036E\036O, smacs=^^N,
          vpa=\020\177%p1%c, use=d210-dg,
  # DASHER D410/D460 series terminals in ANSI mode.
  # These add a large number of intelligent terminal features.
-Line 12765
+Line 12990
 Line 12765
 Line 12990
  #       \E(B            - default primary character set (U.S. ASCII)
  #       \E)4            - default secondary character set (international)
  #
  d410|d411|d460|d461|Data General DASHER D410/D460 series,
          mc5i,
          acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
          cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
          is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
          is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
          ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
          rs2=\E[4;0;2;1;1;1v\E(B\E)4,
          sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
          sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211,
  # Initialization string 2 sets:
  #       \E[3;2;2;0;1;0v
-Line 12792
+Line 13017
 Line 12792
 Line 13017
  #               1;0     - 7 bit (native) keyboard language
  #       \E(0            - default character set (the keyboard native language)
  #
  d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
          km@,
          enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
          rs2=\E[4;0;2;0;1;0v\E(0,
          sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410,
  d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
          km,
          enacs@, rmacs=\036FS00,
          sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
          sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
          use=d400-dg,
  # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
  #
-Line 12828
+Line 13053
 Line 12828
 Line 13053
  #       \E[1;1;126w     - margins at columns 1 and 126
  #       \E[<2h          - horizontal scrolling disabled
  #
  d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
          cols#126,
          is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
          rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410,
  d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
          cols#126,
          is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
          rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b,
  d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
          use=d410-dg,
  # These add intelligent features like scrolling regions.
  d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
          civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
          cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
          home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
          is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
          ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
          rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
          vpa=\036FPFF%p1%2.2X,
          wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
          use=d216+,
  d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
          cols#132,
          is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
          rs2=\036P@1\036FK\036FX0083,
          wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X,
          use=d412-unix,
  d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
          lines#25,
          is3=\036Fz2,
          wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X,
          use=d462+,
  d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
          eslok, hs,
          clear=\036FG\036PH, fsl=\036F}01\022,
          is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
          tsl=\036F}00\036FP%p1%2.2X18\036PG,
          wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X,
          use=d462+,
  #       Relative cursor motions are confined to the current window,
  #       which is not what the scrolling region specification expects.
  #       Thus, relative vertical cursor positioning must be deleted.
  d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
          csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
          cud1@, cuu1@, ll@, use=d462+,
  d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
          use=d412-unix,
  d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
          use=d412-unix-w,
  d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
          use=d412-unix-25,
  d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
          use=d412-unix-s,
  d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
          use=d412-unix-sr,
  d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
          use=d413-unix,
  d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
          use=d413-unix-w,
  d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
          use=d413-unix-25,
  d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
          use=d413-unix-s,
  d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
          use=d413-unix-sr,
  d430c-dg|d430-dg|Data General D430C in DG mode,
          use=d413-dg, use=dg+fixed,
  d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
          use=d413-dg, use=dg+ccc,
  d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
          use=d413-unix, use=dgunix+fixed,
  d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
          use=d413-unix-w, use=dgunix+fixed,
  d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
          use=d413-unix-25, use=dgunix+fixed,
  d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
          use=d413-unix-s, use=dgunix+fixed,
  d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
          use=d413-unix-sr, use=dgunix+fixed,
  d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
          use=d413-unix, use=dgunix+ccc,
  d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
          use=d413-unix-w, use=dgunix+ccc,
  d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
          use=d413-unix-25, use=dgunix+ccc,
  d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
          use=d413-unix-s, use=dgunix+ccc,
  d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
          use=d413-unix-sr, use=dgunix+ccc,
  # DASHER D470C color terminal in ANSI mode.
  # Like the D460 but with 16 colors and without a compressed mode.
-Line 12942
+Line 13167
 Line 12942
 Line 13167
  #               <2      - horizontal scrolling disabled
  #       - (should reset scrolling regions, but that glitches the screen)
  #
  d470c|d470|Data General DASHER D470C,
          is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
          sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
          use=dg+color, use=d460,
  d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
          is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
          sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
          use=dg+color, use=d460-7b,
  # Initialization string 2 sets:
  #       ^^FQ2           - default cursor (solid rectangle)
-Line 12962
+Line 13187
 Line 12962
 Line 13187
  #       ^^FS00          - default character set (the keyboard native language)
  #       - (should reset scrolling regions, but that glitches the screen)
  #
  d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
          is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
          use=dgmode+color, use=d460-dg,
  # DASHER D555 terminal in ANSI mode.
  # Like a D411, but has an integrated phone.
  d555|Data General DASHER D555,
          use=d411,
  d555-7b|Data General DASHER D555 in 7-bit mode,
          use=d411-7b,
  d555-w|Data General DASHER D555 in wide mode,
          use=d411-w,
  d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
          use=d411-7b-w,
  d555-dg|Data General DASHER D555 series in DG mode,
          use=d411-dg,
  # DASHER D577 terminal in ANSI mode.
  # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
  d577|Data General DASHER D577,
          use=d411,
  d577-7b|Data General DASHER D577 in 7-bit mode,
          use=d411-7b,
  d577-w|Data General DASHER D577 in wide mode,
          use=d411-w,
  d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
          use=d411-7b-w,
  d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
          use=d411-dg,
  # DASHER D578 terminal.
  # Like a D577, but without compressed mode; like a D470C in this respect.
-Line 13009
+Line 13234
 Line 13009
 Line 13234
  #               <2      - horizontal scrolling disabled
  #       - (should reset scrolling regions, but that glitches the screen)
  #
  d578|Data General DASHER D578,
          is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
  d578-7b|Data General DASHER D578 in 7-bit mode,
          is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b,
  #### Datamedia (dm)
  #
  # Datamedia was headquartered in Nashua, New Hampshire until it went
  # out of business in 1993, but the ID plates on the terminals referred
  # to the factory in Pennsauken, NJ.  The factory was sold to a PCB board
  # manufacturer which threw out all information about the terminals.
  #
  cs10|colorscan|Datamedia Color Scan 10,
          msgr,
          cols#80, lines#24,
          bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
          ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smso=\E[7m, smul=\E[4m,
  cs10-w|Datamedia Color Scan 10 with 132 columns,
          cols#132,
          cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
  # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
  dm1520|dm1521|datamedia 1520,
          OTbs, am, xenl,
          cols#80, it#8, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
          cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
          home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
          khome=^Y,
  # dm2500: this terminal has both <ich> and <smir>. Applications using
  # termcap/terminfo directly (rather than through ncurses) might be confused.
  dm2500|datamedia2500|datamedia 2500,
          OTbs, OTnc,
          cols#80, lines#24,
          bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
          cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
          dch1=\020\010\030\035$<10*>,
          dl1=\020\032\030\035$<10*>, el=^W, home=^B,
          ich1=\020\034\030\035$<10*>,
          il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
          rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
          smdc=^P, smir=^P, smso=^N,
  # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
  # also, has a meta-key.
  # From: <goldberger@su-csli.arpa>
  # (dmchat: ":MT:" changed to ":km:" -- esr)
  dmchat|dmchat version of datamedia 2500,
          km,
          dl1=\020\032\030\035$<2/>,
          il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
  # (dm3025: ":MT:" changed to ":km:" -- esr)
  dm3025|datamedia 3025a,
          OTbs, km,
          cols#80, it#8, lines#24,
          bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
          dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
          home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
          is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
          smir=\EP, smso=\EO1,
  dm3045|datamedia 3045a,
          OTbs, am, eo, km@, ul, xenl,
          dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
          kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
          kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
          khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
          use=dm3025,
  # Datamedia DT80 soft switches:
  # 1     0=Jump  1=Smooth
  #       Autorepeat      0=off  1=on
  #       Screen          0=Dark 1=light
  #       Cursor          0=u/l  1=block
  #
  # 2     Margin Bell     0=off  1=on
  #       Keyclick        0=off  1=on
  #       Ansi/VT52       0=VT52 1=Ansi
  #       Xon/Xoff        0=Off  1=On
  #
  # 3     Shift3          0=Hash 1=UK Pound
  #       Wrap            0=Off  1=On
  #       Newline         0=Off  1=On
  #       Interlace       0=Off  1=On
  #
  # 4     Parity          0=Odd  1=Even
  #       Parity          0=Off  1=On
  #       Bits/Char       0=7    1=8
  #       Power           0=60Hz 1=50Hz
  #
  # 5     Line Interface  0=EIA  1=Loop
  #       Aux Interface   0=EIA  1=Loop
  #       Local Copy      0=Off  1=On
  #       Spare
  #
  # 6     Aux Parity      0=Odd  1=Even
  #       Aux Parity      0=Off  1=On
  #       Aux Bits/Char   0=7    1=8
  #       CRT Saver       0=Off  1=On
  # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
  dm80|dmdt80|dt80|datamedia dt80/1,
          clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
          cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
          home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
          rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
          use=vt100,
  # except in 132 column mode, where it needs a little padding.
  # This is still less padding than the vt100, and you can always turn on
  # the ^S/^Q handshaking, so you can use vt100 flavors for things like
  # reverse video.
  dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
          cols#132,
          clear=\E[H\E[2J$<50/>, cud1=^J,
          cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
          ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
  # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
  dt80-sas|Datamedia DT803/DTX for SAS usage,
          am, bw,
          cols#80, lines#24,
          acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
          bel=^G, clear=^L, cr=^M,
          csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
          cub1=^H, cud1=\EB, cuf1=^\,
          cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
          el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
          is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
          kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
          rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
          smso=\E$2\004, tbc=\E'0,
  # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
  # These aren't end-all Excel termcaps; but do insert/delete char/line
-Line 13149
+Line 13374
 Line 13149
 Line 13374
  # from the other Datamedias in use here, and yet to associate a model of
  # the Excel terminals with the regular datamedia terminals that share
  # major characteristics.
  excel62|excel64|datamedia Excel 62,
          dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
          kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
          use=dt80,
  excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
          dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
          kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
          use=dt80w,
  excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
          dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
          kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
          smir=\E[4h, use=dt80,
  #### Falco
  #
-Line 13178
+Line 13403
 Line 13178
 Line 13403
  # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
  # This terminal was released around 1983 and was discontinued long ago.
  # The standout and underline highlights are the same.
  falco|ts1|ts-1|falco ts-1,
          OTbs, am,
          cols#80, it#8, lines#24,
          bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
          ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
          kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
          smir=\Eq, smso=\Eg1, smul=\Eg1,
  falco-p|ts1p|ts-1p|falco ts-1 with paging option,
          OTbs, am, da, db, mir, msgr, ul,
          cols#80, it#8, lines#24,
          bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
          cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
          dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
          il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
          rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
          smso=\Eg4, smul=\Eg1,
  # (ts100: I added <rmam>/<smam> based on the init string -- esr)
  ts100|ts100-sp|falco ts100-sp,
          am, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
          clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C$<2>,
          cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
          cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
          el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
          ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
          rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
          sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
          smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
          use=vt100+fnkeys,
  ts100-ctxt|falco ts-100 saving context,
          rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
  #### Florida Computer Graphics
  #
-Line 13230
+Line 13455
 Line 13230
 Line 13455
  # commented out.
  # From: David Bryant <cbosg!djb> 1/7/83
  beacon|FCG Beacon System,
          am, da, db,
          cols#80, lines#32,
          bel=\ESTART\r\E37\r\EEND\r$<1>,
          blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
          cub1=^H, cud1=^J, cuf1=\EV,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
          dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
          ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
          rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
          rmul=\ESTART\r\E60\,0\r\EEND\r,
          sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
          smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
          smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
          smul=\ESTART\r\E60\,1\r\EEND\r,
  #### Fluke
  #
  # The f1720a differences from ANSI: no auto margin, destructive
  # tabs, # of lines, funny highlighting and underlining
  f1720|f1720a|fluke 1720A,
          xt,
          cols#80, lines#16, xmc#1,
          bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
          el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
          kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
          smso=\E[7m, smul=\E[4m,
  #### Liberty Electronics (Freedom)
  #
-Line 13272
+Line 13497
 Line 13272
 Line 13497
  # (f100: added empty <acsc> to suppress a tic warning;
  # made this relative to adm+sgr -- note that <invis> isn't
  # known to work for f100 but does on the f110. --esr)
  f100|freedom|freedom100|freedom model 100,
          OTbs, am, bw, hs, mir, msgr, xon,
          cols#80, lines#24,
          acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
          cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
          flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
          ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
          is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
          kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
          kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
          kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
          smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
          vpa=\E[%p1%{32}%+%c, use=adm+sgr,
  f100-rv|freedom-rv|freedom 100 in reverse video,
          flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
  # The f110 and f200 have problems with vi(1).  They use the ^V
  # code for the down cursor key. When kcud1 is defined in terminfo
  # as ^V, the Control Character Quoting capability (^V in insert mode)
  # is lost! It cannot be remapped in vi because it is necessary to enter
  # a ^V to to quote the ^V that is being remapped!!!
  #
  # f110/f200 users will have to decide whether
  # to lose the down cursor key or the quoting capability. We will opt
  # initially for leaving the quoting capability out, since use of VI
  # is not generally applicable to most interactive applications
  # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
  f110|freedom110|Liberty Freedom 110,
          bw@, eslok,
          it#8, wsl#80,
          blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
          dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE,
          ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET,
          kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
          ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq,
          smso=\EG<, tsl=\Ef, use=f100,
  f110-14|Liberty Freedom 110 14inch,
          dch1@, use=f110,
  f110-w|Liberty Freedom 110 - 132 cols,
          cols#132, use=f110,
  f110-14w|Liberty Freedom 110 14in/132 cols,
          cols#132,
          dch1@, use=f110,
  # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
  f200|freedom200|Liberty Freedom 200,
          OTbs, am, eslok, hs, mir, msgr, xon,
          cols#80, it#8, lines#24, wsl#80,
          acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
          clear=^Z, cnorm=\E.1, cr=^M,
          csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
          cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET,
          flash=\Eo$<200/>\En, fsl=^M, home=^^,
          hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
          kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
          kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
          kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
          kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
          ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
          tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr,
  f200-w|Liberty Freedom 200 - 132 cols,
          cols#132, use=f200,
  # The f200 has the ability to reprogram the down cursor key. The key is
  # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
  # so powering the terminal off and on will not cause the change to be lost.
  f200vi|Liberty Freedom 200 for vi,
          flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
  f200vi-w|Liberty Freedom 200 - 132 cols for vi,
          cols#132, use=f200vi,
  #### GraphOn (go)
  #
-Line 13357
+Line 13582
 Line 13357
 Line 13582
  # terminal, than can be switched to X graphics mode (driven over the serial
  # line) by an escape sequence.  No info on this beast yet.
  # (go140: I added <rmam>/<smam> based on the init string -- esr)
  go140|graphon go-140,
          OTbs,
          cols#80, it#8, lines#24,
          clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
          cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
          ed=\E[J$<10/>, el=\E[K, ht=^I,
          if=/usr/share/tabset/vt100, il1=\E[L,
          is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
          kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
          rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
          rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
          smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
  go140w|graphon go-140 in 132 column mode,
          am,
          cols#132,
          is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q,
          use=go140,
  # Hacked up vt200 termcap to handle GO-225/VT220
  # From: <edm@nwnexus.WA.COM>
  # (go225: I added <rmam>/<smam> based on the init string -- esr)
  go225|go-225|Graphon 225,
          OTbs, am, mir, xenl,
          cols#80, it#8, lines#25, vt#3,
          blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
          csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
          ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
          is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
          kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
          rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
          rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
          rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
          sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
          smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
  #### Harris (Beehive)
  #
-Line 13405
+Line 13630
 Line 13405
 Line 13630
  # so we must have early Superbee2 (Model 600, according to phone conversation
  # with mfr.). It has proved reliable except for some missing padding
  # (notably after \EK and <nl> at bottom of screen).
  #
  # The key idea is that AEP mode is poison for <cup> & that US's in
  # the local memory should be avoided like the plague. That means
  # that the 2048 character local buffer is used as 25 lines of 80
  # characters, period. No scrolling local memory, folks. It also
  # appears that we cannot use naked INS LINE feature since it uses
  # US. The sbi fakes <il1> with an 80-space insert that may be too
  # slow at low speeds; also spaces get converted to \040 which is
  # too long for some programs (not vi).  DEL LINE is ok but slow.
  #
  # The <nl> string is designed for last line of screen ONLY; cup to
  # 25th line corrects the motion inherent in scrolling to Page 1.
  #
  # There is one understood bug. It is that the screen appears to
  # pop to a new (blank) page after a <nel>, or leave a half-line
  # ellipsis to a quad that is the extra 48 memory locations. The
  # data received is dumped into memory but not displayed.  Not to
  # worry if <cup> is being used; the lines not displayed will be,
  # whenever the cursor is moved up there. Since <cup> is addressed
  # relative to MEMORY of window, nothing is lost; but beware of
  # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
  # therefore, is setenv MORE -c .
  #
  # WARNING: Not all features tested.
  #
  # Timings are assembled from 3 sources. Some timings may reflect
  # SB2/Model 300 that were used if more conservative.
  # Tested on a Model 600 at 1200 and 9600 bd.
  #
  # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
  # placed on the keyboard and useless because of AEP, is made
  # into a backspace key. In use ESC must be pressed twice (to send)
  # and sending ^C must be prefixed by ESC to avoid that weird
  # transmit mode associated with ENTER key.
  #
  # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
  # the screen, then it has dropped into ENTER mode; hit
  # RESET--ONLINE--!tset.
  #
  # As delivered this machine has a FATAL feature that will throw
  # it into that strange transmit state (SPOW) if the space bar is
  # hit after a CR is received, but before receiving a LF (or a
  # few others).
  #
  # The circuits MUST be modified to eliminate the SPOW latch.
  # This is done by strapping on chip A46 of the I/O board; cut
  # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
  # chip. This mod has been checked out on a Mod 600 of Superbee II.
  # With this modification absurdly high timings on cr are
  # unnecessary.
  #
  # NOTE WELL that the rear panel switch should be set to CR/LF,
  # not AEP!
  #
  sb1|beehive superbee,
          OTbs, am, bw, da, db, mir, ul, xsb,
          cols#80, lines#25, xmc#1,
          bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
          cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
          cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
          el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
          il1=\EN\EL$<3>\EQ                                                                                \EP$<3> \EO\ER\EA$<3>,
          ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
          kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
          kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
          krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
          rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
          smso=\E_1, smul=\E_0, tbc=\E3,
  sbi|superbee|beehive superbee at Indiana U.,
          xsb,
          cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA,
          use=sb1,
  # Alternate (older) description of Superbee - f1=escape, f2=^C.
  # Note: there are at least 3 kinds of superbees in the world.  The sb1
  # holds onto escapes and botches ^C's.  The sb2 is the best of the 3.
-Line 13488
+Line 13713
 Line 13488
 Line 13713
  # the other two if you want to try to hit that tiny escape key.
  # This description is tricky: being able to use cup depends on there being
  # 2048 bytes of memory and the hairy <nl> string.
  superbee-xsb|beehive super bee,
          am, da, db, xsb,
          cols#80, it#8, lines#25,
          clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
          cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
          dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
          home=\EH, ht=^I, hts=\E1,
          ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
          kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
          kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
          khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
  # This loses on lines > 80 chars long, use at your own risk
  superbeeic|super bee with insert char,
          ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
  sb2|sb3|fixed superbee,
          xsb@, use=superbee,
  ####  Beehive Medical Electronics
  #
-Line 13519
+Line 13744
 Line 13519
 Line 13744
  # been tested and do not work right.  <rmso> is a trouble spot.  Be warned.
  # (bee: <ich1> was empty, which is obviously bogus -- esr)
  beehive|bee|harris beehive,
          OTbs, am, mir,
          cols#80, lines#24,
          cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
          dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
          kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
          kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
          krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
          smir=\EQ, smso=\EdP, smul=\Ed`,
  # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
  # good grief - does this entry make :sg:/:ug: when it doesn't have to?
  # look at those spaces in <rmso>/<smso>.  Seems strange to me...
  # (beehive: <if=/usr/share/tabset/beehive> removed, no such file.  If you
  # really care, cook up one using ^F -- esr)
  beehive3|bh3m|beehiveIIIm|harris beehive 3m,
          OTbs, am,
          cols#80, it#8, lines#20,
          bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
          dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
          il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
  beehive4|bh4|beehive 4,
          am,
          cols#80, lines#24,
          bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
          cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
  # There was an early Australian kit-built computer called a "Microbee".
  # It's not clear whether this is for one of those or for a relative
  # of the Beehive.
  microb|microbee|micro bee series,
          OTbs, am,
          cols#80, it#8, lines#24,
          bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
          el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
          kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
          rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
  # 8675, 8686, and bee from Cyrus Rahman
  # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
  ha8675|harris 8675,
          is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
          kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
          kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
          kf8=\177, kf9=\Ee, use=bee,
  # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
  # in :is: -- esr)
  ha8686|harris 8686,
          is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
          kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
          kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
          kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
          kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
          use=bee,
  #### Hazeltine
  #
-Line 13604
+Line 13829
 Line 13604
 Line 13829
  # redraw the screen.  h1000 is untested.  It doesn't work in
  # vi - this terminal is too dumb for even vi.  (The code is
  # there but it isn't debugged for this case.)
  hz1000|hazeltine 1000,
          OTbs,
          cols#80, lines#12,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
          ind=^J,
  # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
  hz1420|hazeltine 1420,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
          cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
          ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
          smso=\E^_,
  # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>.  Prevents
  # freakout with out-of-range args and tn3270.  No hz since it needs to
  # receive tildes.
  hz1500|hazeltine 1500,
          OTbs, am, hz,
          cols#80, lines#24,
          bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
          cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
          cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
          il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
          kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
  # h1510 assumed to be in sane escape mode.  Else use h1500.
  # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
  # <smso=\E^Y>, but these caps were commented out in 8.3; also,
  # removed incorrect and overridden ":do=^J:" -- esr)
  hz1510|hazeltine 1510,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
          cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
          el=\E^O, il1=\E^Z, ind=^J,
  # Hazeltine 1520
  # The following switch settings are assumed for normal operation:
  #       FULL            CR              U/L_CASE        ESCAPE
  #       FORMAT_OFF      EOM_A_OFF       EOM_B_OFF       WRAPAROUND_ON
  # Other switches may be set for operator convenience or communication
  # requirements.
  hz1520|Hazeltine 1520,
          OTbs, am, bw, msgr,
          cols#80, lines#24,
          bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
          cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
          ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
          kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
          kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
          rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
  # This version works with the escape switch off
  # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
  hz1520-noesc|hazeltine 1520,
          am, hz,
          cols#80, lines#24,
          bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
          cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
          home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
  # Note: the h1552 appears to be the first Hazeltine terminal which
  # is not braindamaged.  It has tildes and backprimes and everything!
  # Be sure the auto lf/cr switch is set to cr.
  hz1552|hazeltine 1552,
          OTbs,
          cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
          lf2=red, lf3=green, use=vt52,
  hz1552-rv|hazeltine 1552 reverse video,
          cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
  # Note: h2000 won't work well because of a clash between upper case and ~'s.
  hz2000|hazeltine 2000,
          OTbs, OTnc, am,
          cols#74, lines#27,
          bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
          cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
          il1=~\032$<6>, ind=^J, pad=\177,
  # Date: Fri Jul 23 10:27:53 1982.  Some unknown person wrote:
  # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
  # to work ok. There is one problem though if one types a lot of garbage
  # characters very fast vi seems not able to keep up and hangs while trying
  # to insert. That's in insert mode while trying to insert in the middle of
  # a line. It might be because the Esprit doesn't have insert char and delete
  # char as a built in function. Vi has to delete to end of line and then
  # redraw the rest of the line.
  esprit|Hazeltine Esprit I,
          OTbs, am, bw,
          cols#80, lines#24,
          bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
          cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
          ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
          kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
          kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
          kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
          lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
          rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
  esprit-am|hazeltine esprit auto-margin,
          am, use=esprit,
  # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
  # Vi it seems always wants to send a control J for "do" and it turned out
  # that the terminal would work somewhat if the auto LF/CR was turned off.
  # (hmod1: removed :dn=~^K: -- esr)
  hmod1|Hazeltine Modular 1,
          OTbs, am, hz,
          cols#80, lines#24,
          bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
          cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
          ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
          rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
  #
  # Hazeltine Executive 80 Model 30 (1554?)
  #       from  Will Martin <control@ALMSA-1.ARPA> via BRL
  # Like VT100, except for different "am" behavior.
  hazel|exec80|h80|he80|Hazeltine Executive 80,
          OTbs, OTpt, am,
          cols#80, it#8, lines#24, vt#3,
          OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
          clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
          cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
          ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
          is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
          kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
          kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
          rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
          rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
          rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
          smul=\E[4m$<2/>,
  #### IBM
  #
  ibm327x|line mode IBM 3270 style,
          gn,
          clear=^M^J, el=^M, home=^M,
  ibm3101|i3101|IBM 3101-10,
          OTbs, am, xon,
          cols#80, lines#24,
          bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
          el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
  ibm3151|IBM 3151 display,
          is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
          sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
          sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162,
  # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
  # removed kend, knp, kpp -TD
  ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
          OTbs, am, mir, msgr,
          cols#80, it#8, lines#24,
          acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
          bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
          cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
          invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
          kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
          kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r,
          kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
          kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
          kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
          kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
          kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
          kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
          ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A,
          rmso=\E4@, rmul=\E4@,
          sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
          sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
  ibm3161-C|IBM 3161-C NLS terminal using cartridge,
          rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161,
  ibm3162|IBM 3162 display,
          blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
          rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
          use=ibm3161-C,
  # This really should not use setab/setaf, but it is clear that the
  # original terminfo does not toggle red/blue colors as in setb/setf.
  ibm3164|i3164|IBM 3164,
          msgr,
          colors#8, pairs#64,
          op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
          setab=\E4  %p1%{64}%+%c,
          setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
          smcup=\E!9/N\E>B, use=ibm3161,
  ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
          am, bw, msgr, xon,
          cols#80, it#8, lines#25,
          acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
          hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
          indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
          kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
          kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
          kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
          kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
          kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
          kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
          kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
          kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
          kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
          kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
          kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
          kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
          krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l,
          rmso=\E[m, rmul=\E[m, rs2=\Ec,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
          sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
  ibmaed|IBM Experimental display,
          OTbs, am, eo, msgr,
          cols#80, it#8, lines#52,
          clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
          dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
          il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
          rmso=\E0, sgr0=\E0, smso=\E0,
  ibm-apl|apl|IBM apl terminal simulator,
          lines#25, use=dm1520,
  # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
  # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
  ibmmono|IBM workstation monochrome,
          eslok, hs,
          bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
          invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
          kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
          khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
          lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
          sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo,
          use=ibm3101,
  ibmega|IBM Enhanced Color Display,
          cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
          nel=^M^J, use=ibmmono,
  # This color scheme is assumed in some recent IBM terminal descriptions
  # (green on black, emulated on a 16-color terminal).
  ibm+color|IBM color definitions,
          colors#8, ncv#3, pairs#64,
          op=\E[32m\E[40m,
          setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;,
          setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;,
  ibm+16color|IBM aixterm color definitions,
          colors#16, pairs#256,
          setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
          setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
          setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
          setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
  ibm5154|IBM 5154 Color display,
          colors#8, ncv@, pairs#64,
          bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
          use=ibm+color,
  ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
          rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
          use=ibmmono,
  ibmvga-c|IBM VGA display color termcap,
          cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
          nel=^M^J, use=ibmega-c,
  ibmvga|IBM VGA display,
          cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
          nel=^M^J, use=ibmega,
  # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
  rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
          lines#32,
          dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
  ibm6155|IBM 6155 Black & White display,
          blink@, bold@, use=ibm5151,
  # Advanced Monochrome (6153) and Color (6154) Graphics Display:
  ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
          lines#31,
          dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
  ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
          lines#31,
          dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo,
          use=ibmega-c,
  ibm6154|IBM 6154 Color displays,
          blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
          sgr0=\E[0;10m, use=ibm5154,
  ibm6153|IBM 6153 Black & White display,
          blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
          sgr0=\E[0;10m, use=ibm5151,
  ibm6153-90|IBM 6153 Black & White display,
          cols#90, lines#36,
          blink@, bold@, use=ibm5151,
  ibm6153-40|IBM 6153 Black & White display,
          cols#40, lines#12, use=ibm6153-90,
  ibm8512|ibm8513|IBM color VGA Terminal,
          am, mir, msgr,
          cols#80, it#8, lines#25,
          acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
          clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
          ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
          il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
          kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
          kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
          kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
          rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
          rmir=\E[4l, rmso=\E[m, rmul=\E[m,
          rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
          smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
          smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
          use=ibm8503,
  hft-c|HFT with Color,
          colors#8, pairs#64,
          acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
          setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
          use=ibm5151, use=ibm+color,
  hft-c-old|HFT with Color PC850,
          colors#8, pairs#64,
          setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
          use=ibm+color,
  hft-old|AIWS High Function Terminal,
          am, xon,
          cols#80, lines#25,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
          cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
          ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
          kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
          kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
          ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color,
  ibm-system1|system1|ibm system/1 computer,
          am, xt,
          cols#80, lines#24,
          bel=^G, clear=^Z, cub1=^H, cuf1=^\,
          cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
          ind=^J,
  #       lft-pc850 : IBM Low Function Terminal Device
  #    lft "supports" underline, bold, and blink in the sense that the lft code
  #    sets all the right bits.  HOWEVER, depending upon the adapter, these
  #    attributes may or may not be supported by the device driver.
  lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
          am, bw, msgr, xon,
          cols#80, it#8, lines#25,
          acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
          cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
          dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
          home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
          il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
          kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
          kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
          kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
          kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
          kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
          kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
          kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
          kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
          kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
          kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
          kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
          kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
          kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
          rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
          sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g,
  ibm5081|hft|IBM Megapel Color display,
          acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
          s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154,
  ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
          eslok, hs,
          lines#33,
          dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo,
          use=ibmega-c,
  ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
          use=hft-c,
  ibm8514|IBM 8514/a color VGA display,
          eslok, hs,
          dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
  ibm8514-c|IBM 8514 color display with standout and underline,
          eslok, hs,
          lines#41,
          cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
          kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
          use=ibmega-c,
  #
  # AIX entries.  IBM ships these with AIX 3.2.5.
  # -- added rc, sc based on manpage -TD
  # Note that we could use ibm+16color, but that is not how IBM defines this one.
  aixterm|IBM Aixterm Terminal Emulator,
          eslok, hs,
          acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
          fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
          sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154,
  aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
          eslok, hs,
          acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
          fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
          sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153,
  aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
          eslok, hs,
          bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
          tsl=\E[?%p1%dT, use=ibm6153,
  jaixterm|IBM Kanji Aixterm Terminal Eemulator,
          acsc@, use=aixterm,
  jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
          acsc@, use=aixterm-m,
  # This flavor is adapted from xterm, in turn from aixterm documentation -TD
  aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors,
-Line 14026
+Line 14251
 Line 14026
 Line 14251
  #
  # gt100 sounds like something DEC would come out with.  Let's hope they don't.
  i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
          ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
          ind=^J, rmso=\Ea, smso=\Eb,
  i400|infoton 400,
          OTbs, am,
          cols#80, lines#25,
          bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A,
          dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
          il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
  # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
  addrinfo,
          am,
          cols#80, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
          cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\,
  # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
  infoton,
          am,
          cols#80, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
          ed=^K, ind=^J, ll=^H^\,
  # The ICL6402 was actually the Kokusai Display System 6402.
  # The 6404 was the KDS7372 (color version of the 6402).
  #
  # ICL6404 control codes follow:
  #
  #code            function
-Line 14314
+Line 14539
 Line 14314
 Line 14539
  # full duplex, parallel attribute mode, display user status line, white
  # foreground, black background, normal highlight.
  #
  icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
          OTbs, am, hs,
          cols#80, lines#24,
          bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
          cnorm=\E.3, cr=^M,
          csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
          cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I,
          hts=\E1, il1=\EE, invis=\E[1ZZ,
          is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ,
          rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
          rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
          sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
          sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
  icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
          rs2=\Eo1, use=icl6404,
  #### Interactive Systems Corp
  #
-Line 14341
+Line 14566
 Line 14341
 Line 14566
  # From: <cithep!eric>  Wed Sep 16 08:06:44 1981
  # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
  # ":le=^_:" later overridden -- esr)
  intext|Interactive Systems Corporation modified owl 1200,
          OTbs, am,
          cols#80, it#8, lines#24, xmc#1,
          bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
          cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
          dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
          el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
          kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
          kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
          kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
          rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%,
          smso=^V$\,,
  intext2|intextii|INTERACTIVE modified owl 1251,
          am, bw, ul,
          cols#80, lines#24, xmc#0,
          bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
          dl1=\E[M, ed=\E[J, el=\E[K,
          flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
          hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
          kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
          kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
          kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
          khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
          lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
          lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
          smul=\E[18 D,
  #### Kimtron (abm, kt)
  #
  # Kimtron seems to be history, but as March 1998 these people are still
  # offering repair services for Kimtron equipment:
  #
  #    Com/Pair Monitor Service
  #    1105 N. Cliff Ave.
  #    Sioux Falls, South Dakota 57103
  #
  #    WATS voice:  1-800/398-4946
  #    POTS   fax: +1 605/338-8709
  #    POTS voice: +1 605/338-9650
-Line 14390
+Line 14615
 Line 14390
 Line 14615
  # Kimtron ABM 85 added by Dual Systems
  # (abm85: removed duplicated ":kd=^J:" -- esr)
  abm85|Kimtron ABM 85,
          OTbs, am, bw, msgr,
          cols#80, it#8, lines#24, xmc#1,
          cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\Ey, el=\Et, ht=^I,
          if=/usr/share/tabset/stdcrt, il1=\EE,
          is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
          kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
          rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
  # Kimtron ABM 85H added by Dual Systems.
  # Some notes about the abm85h entries:
  # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
-Line 14422
+Line 14647
 Line 14422
 Line 14647
  # 6) auto new-line should be on (selectable from setup mode only)
  #
  # From: Erik Fair <fair@ucbarpa>  Sun Oct 27 07:21:05 1985
  abm85h|Kimtron ABM 85H native mode,
          hs,
          xmc@,
          bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
          fsl=^M, invis@,
          is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
          kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr,
          use=abm85,
  abm85e|Kimtron ABM 85H in 920E mode,
          xmc@,
          bel=^G, dim=\E), flash@,
          is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
          rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
  abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
          xmc@,
          bel=^G, dim=\E),
          is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
          rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85,
  # From: <malman@bbn-vax.arpa>
  # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
  kt7|kimtron model kt-7,
          OTbs, am,
          cols#80, it#8, lines#24,
          cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
          if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
          kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
          kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
          kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
          kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
          kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr,
  # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
  # other kt7 entry and the adjacent key capabilities).  Removed EE which is
  # identical to :mh:.  Removed :ES=\EGD: which is some kind of highlight
  # but we can't figure out what.
  kt7ix|kimtron model kt-7 or 70 in IX mode,
          am, bw,
          cols#80, it#8, lines#25,
          acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
          civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
          cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
          home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
          is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
          ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
          kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
          kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
          nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0,
          sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
  #### Microdata/MDIS
  #
  # This was a line of terminals made by McDonnell-Douglas Information Systems.
  # These entries come direct from MDIS documentation.  I have edited them only
  # to move primary names of the form p[0-9] * to aliases, and to comment out
  # <rmacs>/<smacs> in a couple of entries without <acsc> strings.  I have
  # also removed the change history; the last version indicates this is
  # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
  #
-Line 14544
+Line 14769
 Line 14544
 Line 14769
  #  Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
  #  value up, followed by backspace.
  #
  prism2|MDC Prism-2,
          am, bw, msgr,
          cols#80, lines#24,
          bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
          cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
          cuu1=^Z, ed=\EJ, el=\EK, home=^A,
          hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
          ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
  # p4: Prism-4
  # -----------
-Line 14563
+Line 14788
 Line 14563
 Line 14788
  #  value up, followed by backspace.
  #  Cursor key definitions removed because they interfere with vi and csh keys.
  #
  prism4|p4|P4|MDC Prism-4,
          am, bw, hs, mc5i, msgr,
          cols#80, lines#24, wsl#72, xmc#1,
          bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
          cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
          cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
          cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
          fsl=^]\345, home=^A,
          hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
          ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
          rev=^CD, rmso=^C\s, rmul=^C\s,
          sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
          sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
          vpa=\013%p1%{32}%+%c,
  # p5: Prism-5
  # -----------
-Line 14584
+Line 14809
 Line 14584
 Line 14809
  # Same definition as p4. Includes Prism-6 (not tested!).
  # Does not use any multi-page features.
  #
  prism5|p5|P5|MDC Prism-5,
          use=p4,
  # p7: Prism-7
  # -----------
-Line 14595
+Line 14820
 Line 14595
 Line 14820
  #  Use p4 for very early models of P7.
  #  Rev-index removed; can't send nulls to terminal in 8-bit modes.
  #
  prism7|p7|P7|MDC Prism-7,
          cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
  # p8: Prism-8
  # -----------
-Line 14609
+Line 14834
 Line 14609
 Line 14834
  #  Rev-index removed; can't send nulls to terminal in 8-bit modes.
  # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
  #
  prism8|p8|P8|MDC Prism-8,
          cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
          vpa=\E[%i%p1%dd, use=p4,
  # p8-w: Prism-8 in 132 column mode
  # --------------------------------
-Line 14620
+Line 14845
 Line 14620
 Line 14845
  # Notes:
  #  Rev-index removed; can't send nulls to terminal in 8-bit modes.
  #
  prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
          cols#132,
          is2=\E[<12h\E[<14h, use=p8,
  # p9: Prism-9 in ANSI mode
  # -------------------------
-Line 14642
+Line 14867
 Line 14642
 Line 14867
  #  . Padding values (sets xon)
  # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
  #
  prism9|p9|P9|MDC Prism-9 in ANSII mode,
          am, bw, hs, mc5i, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3, wsl#72,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
          clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
          dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
          ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
          ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
          is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
          kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
          kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
          kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
          kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
          khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
          prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
          ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
          rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
          sc=\E[%y,
          sgr=\E[%{0}%?%p1%p3%|%t%{7}%+%;%?%p2%t%{2}%+%;%?%p4%t%{5}%+%;%?%p6%t%{1}%+%;m%?%p8%t\E[%{32}%+%d%%{%;%?%p9%t\016%e\017%;,
          sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
-Line 14673
+Line 14898
 Line 14673
 Line 14898
  #
  # 'Wide' version of p9.
  #
  prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
          cols#132,
          is2=\E[&p\E[<12l\E F\E[<14h,
          rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
  # p9-8: Prism-9 in P8 mode
  # ------------------------
-Line 14685
+Line 14910
 Line 14685
 Line 14910
  # Similar to p8 definition.
  # Insertion and deletion operations possible.
  #
  prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
  # p9-8-w: Prism-9 in P8 and 132 column modes
  # ------------------------------------------
  #
  # P9 terminal in P8 emulation mode and 132 column mode.
  #
  prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
  # p12: Prism-12 in ANSI mode
  # ---------------------------
  #
  # See p9 definition.
  #
  prism12|p12|P12|MDC Prism-12 in ANSI mode,
          use=p9,
  # p12-w: Prism-12 in 132 column mode
  # ----------------------------------
  #
  # 'Wide' version of p12.
  #
  prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
          use=p9-w,
  # p12-m: Prism-12 in MDC emulation mode
  # -------------------------------------
-Line 14721
+Line 14946
 Line 14721
 Line 14946
  # Similar to p8 definition.
  # Insertion and deletion operations possible.
  #
  prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
          use=p9-8,
  # p12-m-w: Prism-12 in MDC emulation and 132 column modes
  # -------------------------------------------------------
  #
  # P12 terminal in MDC emulation mode and 132 column mode.
  #
  prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
          use=p9-8-w,
  # p14: Prism-14 in ANSII mode
  # ---------------------------
  #
  # See p9 definition.
  #
  prism14|p14|P14|MDC Prism-14 in ANSII mode,
          use=p9,
  # p14-w: Prism-14 in 132 column mode
  # ----------------------------------
  #
  # 'Wide' version of p14.
  #
  prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
          use=p9-w,
  # p14-m: Prism-14 in MDC emulation mode
  # -------------------------------------
-Line 14755
+Line 14980
 Line 14755
 Line 14980
  # Similar to p8 definition.
  # Insertion and deletion operations possible.
  #
  prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
          use=p9-8,
  # p14-m-w: Prism-14 in MDC emulation and 132 column modes
  # -------------------------------------------------------
  #
  # P14 terminal in MDC emulation mode and 132 column mode.
  #
  prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
          use=p9-8-w,
  # End of McDonnell Information Systems Prism definitions
  # These things were popular in the Pick database community at one time
  # From: George Land <georgeland@aol.com> 24 Sep 1996
  p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
          am, bw, hs, mir,
          cols#80, lines#24, ma#1, wsl#78, xmc#1,
          bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
          cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
          ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
          kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
          kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
          kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
          kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
          kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
          lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
          pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
          smul=^C0,
  #### Microterm (act, mime)
  #
-Line 14796
+Line 15021
 Line 14796
 Line 15021
  # <rmso=^N> since  it gets confused and it's too dim anyway.  No <ich1>
  # since Sytek insists ^S means xoff.
  # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
  act4|microterm|microterm act iv,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
          cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
          cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
          ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
          il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
          kcuu1=^Z,
  # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
  # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
  # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
  act5|microterm5|microterm act v,
          kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA,
          use=act4,
  # Mimes using brightness for standout.  Half bright is really dim unless
  # you turn up the brightness so far that lines show up on the screen.
  mime-fb|full bright mime1,
          is2=^S\E, rmso=^S, smso=^Y, use=mime,
  mime-hb|half bright mime1,
          is2=^Y\E, rmso=^Y, smso=^S, use=mime,
  # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
  # the more plausible ":do=^J:" -- esr)
  # uc was at one time disabled to get around a curses bug, be wary of it
  mime|mime1|mime2|mimei|mimeii|microterm mime1,
          OTbs, am,
          cols#80, it#8, lines#24, vt#9,
          bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
          cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
          cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
          il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
          kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
  # These termcaps (for mime2a) put the terminal in low intensity mode
  # since high intensity mode is so obnoxious.
  mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
          dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
          il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
          kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
          smir=\EE, smso=\E\:, smul=\E6,
  # This is the preferred mode (but ^X can't be used as a kill character)
  mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
          OTbs,
          cols#80, it#8, lines#24,
          bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
          dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
          il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
          rmul=\E5, smir=^O, smso=\E8, smul=\E4,
  # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
  mime3a|mime1 emulating 3a,
          am@,
          kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
  mime3ax|mime-3ax|mime1 emulating enhanced 3a,
          it#8,
          dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>,
          use=mime3a,
  # Wed Mar  9 18:53:21 1983
  # We run our terminals at 2400 baud, so there might be some timing problems at
  # higher speeds. The major improvements in this model are the terminal now
  # scrolls down and insert mode works without redrawing the rest of the line
  # to the right of the cursor. This is done with a bit of a kludge using the
  # exit graphics mode to get out of insert, but it does not appear to hurt
  # anything when using vi at least. If you have some users using act4s with
  # programs that use curses and graphics mode this could be a problem.
  mime314|mm314|mime 314,
          am,
          cols#80, lines#24,
          clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
          dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
          kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
  # Microterm mime 340 from University of Wisconsin
  mm340|mime340|mime 340,
          cols#80, lines#24,
          clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
          el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
          kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
  # This came from University of Wisconsin marked "astro termcap for jooss".
  # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
  # also added <rmam>/<smam> based  on the init string -- esr)
  mt4520-rv|micro-term 4520 reverse video,
          am, hs, msgr, xenl, xon,
          cols#80, it#8, lines#24, wsl#80,
          bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
          fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
          ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
          is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
          kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
          ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
          ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
          rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
          sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
          tbc=\E[g, tsl=\E[25;1H,
  # Fri Aug  5 08:11:57 1983
  # This entry works for the ergo 4000 with the following setups:
  # ansi,wraparound,newline disabled, xon/xoff disabled in both
  # setup a & c.
  #
  # WARNING!!! There are multiple versions of ERGO 4000 microcode
  # Be advised that very early versions DO NOT WORK RIGHT !!
  # Microterm does have a ROM exchange program- use it or lose big
  # (ergo400: added <rmam>/<smam> based on the init string -- esr)
  ergo4000|microterm ergo 4000,
          da, db, msgr,
          cols#80, lines#66,
          bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
          dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
          el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>,
          is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
          kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
          lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
          rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
          smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
          smso=\E[7m$<20>,
  #### NCR
  #
  # NCR's terminal group was merged with AT&T's when AT&T bought the company.
  # For what happened to that group, see the ADDS section.
-Line 14941
+Line 15166
 Line 14941
 Line 15166
  #
  # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
  # DEC vt200/300 with color capabilities added.
  ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
          colors#8, pairs#64,
          op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
          use=ncr260vt300an,
  # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
  # DEC vt200/300 with color capabilities added.
  ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
          colors#8, pairs#64,
          op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
          use=ncr260vt300wan,
  # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
  # DEC vt200/300 with color capabilities added.
  ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
          colors#8, pairs#64,
          op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
          use=ncr260vt300pp,
  # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
  # DEC vt200/300 with color capabilities added.
  ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
          colors#8, pairs#64,
          op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
          use=ncr260vt300wpp,
  # This definition for ViewPoint supports several attributes.  This means
  # that it has magic cookies (extra spaces where the attributes begin).
  # Some applications do not function well with magic cookies.  The System
  # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
  # If supporting various attributes is not vital, 'xmc#1' and the extra
  # attributes can be removed.
  # Mapping to ASCII character set ('acsc' capability) can also be
  # restored if needed.
  ncr260vppp|NCR 2900_260 viewpoint,
          am, bw, hs, km, mc5i, mir, msgr, xon,
          cols#80, lines#24, nlab#32, xmc#1,
          acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
          cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
          cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
          dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>,
          el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1,
          il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
          is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
          kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
          kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
          kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
          kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
          kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
          kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
          kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
          kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
          kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
          kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
          kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
          mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
          nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
          rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
          rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
          sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
          smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
  ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
          cols#132,
          cup=\Ea%i%p1%dR%p2%dC$<30>,
          is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
          rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
          use=ncr260vppp,
  ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
          am, hs, mir, msgr, xenl, xon,
          cols#80, lines#24, nlab#32,
          acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
          blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
          cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
          cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
          cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
          cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
          dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
          ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
          fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
          hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
          il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
          invis=\E[8m,
          is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~,
          knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>,
          rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
          rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
          rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
          sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
          smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
          tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad,
  ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
          cols#132,
          cup=\E[%i%p1%d;%p2%dH$<30>,
          is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          use=ncr260vt100an,
  ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
          is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
          kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
          lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
          rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          smkx=\E=, use=ncr260vt100an,
  ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+  kybd,
          cols#132,
          cup=\E[%i%p1%d;%p2%dH$<30>,
          is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          use=ncr260vt100pp,
  ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
          am, hs, mir, msgr, xenl, xon,
          cols#80, lines#24, nlab#32,
          acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
          blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
          csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
          cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
          cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
          cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
          cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
          dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
          ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
          fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
          ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
          ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
          is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
          kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
-Line 15079
+Line 15304
 Line 15079
 Line 15304
          kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~,
          kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~,
          kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
          kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
          kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
          kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
          mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
          ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
          rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
          rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
          sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
          smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
          use=vt220+keypad,
  ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
          cols#132,
          cup=\E[%i%p1%d;%p2%dH$<30>,
          is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
          rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
          use=ncr260vt200an,
  ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
          ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
          kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
          lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
          use=ncr260vt200an,
  ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+  kybd,
          cols#132,
          cup=\E[%i%p1%d;%p2%dH$<30>,
          is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          use=ncr260vt200pp,
  ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
          am, hs, mir, msgr, xenl, xon,
          cols#80, lines#24, nlab#32,
          acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
          blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
          csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
          cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
          cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
          cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
          cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
          dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
          ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
          fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
          ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
          ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
          is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~,
          kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
-Line 15141
+Line 15366
 Line 15141
 Line 15366
          nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>,
          rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
          rmul=\E[24m,
          rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
          sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
          smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
          use=vt220+keypad,
  ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
          cols#132,
          cup=\E[%i%p1%d;%p2%dH$<30>,
          is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
          rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
          use=ncr260vt300an,
  ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
          ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
          kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
          lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
          use=ncr260vt300an,
  NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+  kybd,
          cols#132,
          cup=\E[%i%p1%d;%p2%dH$<30>,
          is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
          use=ncr260vt300pp,
  # This terminfo file contains color capabilities for the Wyse325 emulation of
  # the NCR 2900/260C color terminal.  Because of the structure of the command
  # (escape sequence) used to set color attributes, one of the fore/background
  # colors must be preset to a given value. I have set the background color to
  # black.  The user can change this setup by altering the last section of the
  # 'setf' definition.  The escape sequence to set color attributes is
  #               ESC d y <foreground_color> <background_color> 1
  # In addition, the background color can be changed through the desk accessories.
  # The capablitiy 'op' sets colors to green on black (default combination).
  #
  # NOTE:  The NCR Unix System Administrator's Shell will not function properly
  #           if the 'pairs' capability is defined. Un-Comment the 'pairs'
  #           capability and recompile if you wish to have it included.
  #
  ncr260wy325pp|NCR 2900_260 wyse 325,
          am, bw, hs, km, mc5i, mir, msgr, xon,
          colors#16, cols#80, lines#24, ncv#33, nlab#32,
          acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
          cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
          cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
          cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
          ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
          hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
          is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
          kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
          kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
          kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
          kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
          kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
          kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
          kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
          kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
          kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
          kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
          mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
          nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
          rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
          rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          setb=\s,
          setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
          sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
          smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
          tsl=\EF,
  ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
          cols#132,
          cup=\Ea%i%p1%dR%p2%dC$<30>,
          is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          use=ncr260wy325pp,
  # This definition for Wyse 350 supports several attributes.  This means
  # that it has magic cookies (extra spaces where the attributes begin).
  # Some applications do not function well with magic cookies.  The System
  # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
  # If supporting various attributes is not vital, 'xmc#1' and the extra
  # attributes can be removed.
  # Mapping to ASCII character set ('acsc' capability) can also be
  # restored if needed.
  # In addition, color capabilities have been added to this file.  The drawback,
  # however, is that the background color has to be black.  The foreground colors
  # are numbered 0 through 15.
  #
  # NOTE:  The NCR Unix System Administrator's Shell does not function properly
  #           with the 'pairs' capability defined as below.  If you wish to
  #           have it included, Un-comment it and recompile (using 'tic').
  #
  ncr260wy350pp|NCR 2900_260 wyse 350,
          am, bw, hs, km, mc5i, mir, msgr, xon,
          colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1,
          acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
          cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
          cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
          cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
          ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
          hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
          is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
          kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
          kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
          kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
          kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
          kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
          kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
          kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
          kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
          khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
          mc0=\EP$<10>, mc4=^T, mc5=^R,
          mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
          nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
          rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
          rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          setb=\s,
          setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
          sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
          smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
          tsl=\EF,
  ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
          cols#132,
          cup=\Ea%i%p1%dR%p2%dC$<30>,
          is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
          rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
          use=ncr260wy350pp,
  # This definition for Wyse 50+ supports several attributes.  This means
  # that it has magic cookies (extra spaces where the attributes begin).
  # Some applications do not function well with magic cookies.  The System
  # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
  # If supporting various attributes is not vital, 'xmc#1' and the extra
  # attributes can be removed.
  # Mapping to ASCII character set ('acsc' capability) can also be
  # restored if needed.
  # (ncr260wy50+pp: originally contained commented-out
  # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
  ncr260wy50+pp|NCR 2900_260 wyse 50+,
          am, bw, hs, km, mc5i, mir, msgr, xon,
          cols#80, lines#24, nlab#32, xmc#1,
          acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
          cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
          cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
          cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
          ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
          ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
          invis=\EG1,
          is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
          kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
          kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
          kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
          kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
          kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
          kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
          kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
          kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
          khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
          mc0=\EP$<10>, mc4=^T, mc5=^R,
          mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
          nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
          rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
          rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
          smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
  ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
          cols#132,
          cup=\Ea%i%p1%dR%p2%dC$<30>,
          is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
          rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
          use=ncr260wy50+pp,
  ncr260wy60pp|NCR 2900_260 wyse 60,
          am, bw, hs, km, mc5i, mir, msgr, xon,
          cols#80, lines#24, nlab#32,
          acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
          cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
          cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
          cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
          ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
          ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
          invis=\EG1,
          is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
          kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
          kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
          kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
          kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
          kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
          kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
          kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
          kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
          kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
          kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
          mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
          nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
          rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
          rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
          smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
          tsl=\EF,
  ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
          cols#132,
          cup=\Ea%i%p1%dR%p2%dC$<30>,
          is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
          use=ncr260wy60pp,
  ncr160vppp|NCR 2900_160 viewpoint,
          use=ncr260vppp,
  ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
          use=ncr260vpwpp,
  ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
          use=ncr260vt100an,
  ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
          use=ncr260vt100pp,
  ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
          use=ncr260vt100wan,
  ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+  kybd,
          use=ncr260vt100wpp,
  ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
          use=ncr260vt200an,
  ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
          use=ncr260vt200pp,
  ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
          use=ncr260vt200wan,
  ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+  kybd,
          use=ncr260vt200wpp,
  ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
          use=ncr260vt300an,
  ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
          use=ncr260vt300pp,
  ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
          use=ncr260vt300wan,
  ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+  kybd,
          use=ncr260vt300wpp,
  ncr160wy50+pp|NCR 2900_160 wyse 50+,
          use=ncr260wy50+pp,
  ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
          use=ncr260wy50+wpp,
  ncr160wy60pp|NCR 2900_160 wyse 60,
          use=ncr260wy60pp,
  ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
          use=ncr260wy60wpp,
  ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
          am, hs, mc5i, mir, msgr, xon,
          cols#80, it#8, lines#24, nlab#32,
          acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
          bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
          clear=\E[2J\E[1;1H$<300>, cr=^M,
          csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
          cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
          cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
          cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
          cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
          dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
          ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
          enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
          ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
          ind=\ED,
          is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
          kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
          kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
          rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
          rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
          rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
          sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
          sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
          smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
          tsl=\E[>+1$<70>,
  ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
          cols#132,
          is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
          rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
          use=ncrvt100an,
  #
  # Vendor-supplied NCR termcaps end here
-Line 15431
+Line 15656
 Line 15431
 Line 15656
  # 6   - Don't Send or Do Send Spaces
  # 7   - Parity Enable
  # 8   - Stop Bits (One/Two)
  #
  # Switch B:
  # 1   - Upper/Lower Shift
  # 2   - Typewriter Shift
-Line 15440
+Line 15665
 Line 15440
 Line 15665
  # 5-6 - Carriage Return Without / With Line Feed
  # 7   - Extended Mode
  # 8   - Suppress Keyboard Display
  #
  # Switch C:
  # 1   - End of line entry disabled/enabled
  # 2   - Conversational mode / (Local?) Mode
-Line 15450
+Line 15675
 Line 15450
 Line 15675
  # 6   - (50Hz?) / 60 Hz
  # 7   - Exit after level zero diagnostics
  # 8   - RS-232 interface
  #
  # Switch D:
  # 1   - Reverse Channel (yes / no)
  # 2   - Manual answer (no / yes)
-Line 15476
+Line 15701
 Line 15476
 Line 15701
  #               P4 <==> Blink attribute parameter
  #               P5 <==> Dim attribute parameter
  # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
  ncr7900i|ncr7900|ncr 7900 model 1,
          am, bw, ul,
          cols#80, lines#24, xmc#1,
          bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
          cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
          is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
          kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
          rmul=\E0@,
          sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
          sgr0=\E0@, smso=\E0Q, smul=\E0`,
  ncr7900iv|ncr 7900 model 4,
          am, bw, eslok, hs,
          cols#80, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
          cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
          fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
          kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
          kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
          khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
          tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
  # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
  #          The user can enter a CTRL-B to get out of this locked state.
  # In <hpa>, we want to output the character given by the formula:
  #               ((col / 10) * 16) + (col % 10)          where "col" is "p1"
  ncr7901|ncr 7901 model,
          am, bw, ul,
          cols#80, lines#24,
          bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
          cub1=^H, cud1=^J, cuf1=^F,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
          ed=\Ek, el=\EK,
          hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
          is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
          khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
          sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
          sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
          vpa=\013%p1%{64}%+%c,
  # Newbury Data Recording Limited (Newbury Data)
  #
-Line 15595
+Line 15820
 Line 15595
 Line 15820
  # These are official terminfo entries from within Perkin-Elmer.
  #
  bantam|pe550|pe6100|perkin elmer 550,
          OTbs,
          cols#80, lines#24,
          bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
          el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
  fox|pe1100|perkin elmer 1100,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
          cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
          ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
          home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
  owl|pe1200|perkin elmer 1200,
          OTbs, am, in,
          cols#80, lines#24,
          bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
          cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
          dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
          el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
          hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
          kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
          kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
          rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
  pe1251|pe6300|pe6312|perkin elmer 1251,
          am,
          cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
          bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
          cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
          ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
          kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
          kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
  # (pe7000m: this had
  #       rmul=\E!\0, smul=\E!\040,
  # which is probably wrong, it collides with kf0
  pe7000m|perkin elmer 7000 series monochrome monitor,
          am,
          cols#80, lines#24,
          bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
          cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
          ed=\EJ, el=\EI, home=\EH, ind=^J,
          is1=\E!\0\EW  7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
          kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
          kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
          kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
          ll=\ES7\s, ri=\ER,
  pe7000c|perkin elmer 7000 series colour monitor,
          is1=\E!\0\EW  7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
          rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m,
  #### Sperry Univac
  #
  # Sperry Univac has merged with Burroughs to form Unisys.
  #
  # This entry is for the Sperry UTS30 terminal running the TTY
  # utility under control of CP/M Plus 1R1. The functionality
  # provided is comparable to the DEC vt100.
  # (uts30: I added <rmam>/<smam> based on the init string -- esr)
  uts30|sperry uts30 with cp/m@1R1,
          am, bw, hs,
          cols#80, lines#24, wsl#40,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
          cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
          cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
          dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
          ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
          ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
          rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
          rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
          rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
          sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
          smul=\E[4m, tsl=\E], uc=\EPB,
  #### Tandem
  #
-Line 15680
+Line 15905
 Line 15680
 Line 15905
  # on the merchant market, and so are fairly uncommon.
  #
  tandem6510|adm3a repackaged by Tandem,
          use=adm3a,
  # A funny series of terminal that TANDEM uses.  The actual model numbers
  # have a fourth digit after 653 that designates minor variants.  These are
-Line 15689
+Line 15914
 Line 15689
 Line 15914
  # this doubtless(?) exploits.  There is a 6520 that is slightly dumber.
  # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
  # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
  tandem653|t653x|Tandem 653x multipage terminal,
          OTbs, am, da, db, hs,
          cols#80, lines#24, wsl#64, xmc#1,
          clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
          ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
          rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
  #### Tandy/Radio Shack
  #
  # Tandy has a line of VDTs distinct from its microcomputers.
  #
  dmterm|deskmate terminal,
          am, bw,
          cols#80, lines#24,
          bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
          cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
          ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
          kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
          khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
          lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
          use=adm+sgr,
  dt100|dt-100|Tandy DT-100 terminal,
          xon,
          cols#80, lines#24, xmc#1,
          acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
          clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
          csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
          dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
          il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
          kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
          kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
          knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
          lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
  dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
          cols#132, use=dt100,
  dt110|Tandy DT-110 emulating ansi,
          xon,
          cols#80, lines#24,
          acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
          clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
          cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
          dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
          ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
          kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
          kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
          khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
          lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
          lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
          smacs=^N, smso=\E[7m, smul=\E[4m,
  pt210|TRS-80 PT-210 printing terminal,
          hc, os,
          cols#80,
          bel=^G, cr=^M, cud1=^J, ind=^J,
  #### Tektronix (tek)
  #
  # Tektronix tubes are graphics terminals.  Most of them use modified
  # oscilloscope technology incorporating a long-persistence green phosphor,
  # and support vector graphics on a main screen with an attached "dialogue
  # area" for interactive text.
  #
  tek|tek4012|tektronix 4012,
          OTbs, os,
          cols#75, lines#35,
          bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
          ff=\014$<1000>, is2=\E^O,
  # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
  tek4013|tektronix 4013,
          acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
  tek4014|tektronix 4014,
          cols#81, lines#38,
          is2=\E\017\E9, use=tek4012,
  # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
  tek4015|tektronix 4015,
          acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
  tek4014-sm|tektronix 4014 in small font,
          cols#121, lines#58,
          is2=\E\017\E\:, use=tek4014,
  # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
  tek4015-sm|tektronix 4015 in small font,
          acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
  # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
  #
  # You need to have "stty nl2" in effect.  Some versions of tset(1) know
-Line 15789
+Line 16014
 Line 15789
 Line 16014
  # live with Magic Cookie, remove the :so: and :se: fields and do without
  # reverse video.  If you like reverse video stand-out mode but don't want
  # it to flash, change the letter 'H' to 'P' in the :so: field.
  tek4023|tektronix 4023,
          OTbs, am,
          OTdN#4, cols#80, lines#24, vt#4, xmc#1,
          OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
          cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
          rmso=^_@, smso=^_P,
  # It is recommended that you run the 4025 at 4800 baud or less;
  # various bugs in the terminal appear at 9600.  It wedges at the
  # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
  # on keyboard don't work.  You have to hit BREAK twice to get
  # one break at any speed - this is a documented feature.
  # Can't use cursor motion because it's memory relative, and
  # because it only works in the workspace, not the monitor.
  # Same for home. Likewise, standout only works in the workspace.
  #
  # <el> was commented out since vi and rogue seem to work better
  # simulating it with lots of spaces!
  #
  # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
  # and didn't seem necessary.
  #
  tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
          OTbs, am, da, db,
          cols#80, it#8, lines#34, lm#0,
          bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
          cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
          cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
          cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
          dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
          ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
          il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
          ind=^F^J,
          is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
          rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
          smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
  tek4025-17|tek 4025 17 line window,
          lines#17, use=tek4025,
  tek4025-17-ws|tek 4025 17 line window in workspace,
          is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
          rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
          smso=\037att e\r, use=tek4025-17,
  tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
          is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
          rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
  # Tektronix 4025a
  # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
  # The following status modes are assumed for normal operation (replace the
-Line 15853
+Line 16078
 Line 15853
 Line 16078
  # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
  # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
  # work any more. -- esr)
  tek4025a|Tektronix 4025A,
          OTbs, OTpt, am, bw, da, db, xon,
          cols#80, it#8, lines#34,
          bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
          cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
          cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
          cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
          dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
          el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
          il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
          rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
          tbc=\035sto;,
  # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
  # Here's the command file that I use to get rogue to work on the 4025.
  # It should work with any program using the old curses (e.g. it better
  # not try to scroll, or cursor addressing won't work.  Also, you can't
  # see the cursor.)
  # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
  tek4025-cr|tek 4025 for curses and rogue,
          OTbs, am,
          cols#80, it#8, lines#33,
          clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
          cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
          is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
          rmcup=\037wor 0, smcup=\037wor 33h,
  # next two lines commented out since curses only allows 128 chars, sigh.
  #       :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
  #       :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
  tek4025ex|4025ex|4027ex|tek 4025 w/!,
          is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
          rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025,
  tek4105|tektronix 4105,
          OTbs, am, mir, msgr, ul, xenl, xt,
          cols#79, it#8, lines#29,
          acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
          clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
          cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
          dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
          il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
          is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
          kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
          rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
          rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
          smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
          smul=\E[=5;<2m, tbc=\E[1g,
  # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
  tek4105-30|4015 emulating 30 line vt100,
          am, mir, msgr, xenl, xon,
          cols#80, it#8, lines#30, vt#3,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
          clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C$<2>,
          cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
          cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
          enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8,
          rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
          rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>,
          sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
          smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
          use=vt100+fnkeys,
  # Tektronix 4105 from BRL
-Line 15941
+Line 16166
 Line 15941
 Line 16166
  # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
  # "IC" cannot be used in combination with "im" & "ei".
  # "tek4105a" is just a guess:
  tek4105a|Tektronix 4105,
          OTbs, OTpt, msgr, xon,
          OTkn#8, cols#80, it#8, lines#30, vt#3,
          acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
          civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
          cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
          il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
          kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
          lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
          rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
          rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
          sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
          smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
  #
  # Tektronix 4106/4107/4109 from BRL
-Line 15985
+Line 16210
 Line 15985
 Line 16210
  # and factory color maps.  After setting these modes, save them with NVSAVE.  No
  # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
  # "IC" cannot be used in combination with "im" & "ei".
  tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
          msgr, xon,
          cols#80, it#8, lines#32, vt#3,
          acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
          civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
          cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
          il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
          kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
          lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
          rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
          rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
          sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
          smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
  tek4107|tek4109|tektronix terminals 4107 4109,
          OTbs, am, mir, msgr, ul, xenl, xt,
          cols#79, it#8, lines#29,
          bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
          bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
          cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
          dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
          kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
          rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
          rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
          sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>\E%%!0,
          sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
          smul=\E%!1\E[4m$<2>\E%!0,
  # Tektronix 4207 with sysline.  In the ancestral termcap file this was 4107-s;
  # see the note attached to tek4207.
  tek4207-s|Tektronix 4207 with sysline but no memory,
          eslok, hs,
          dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
          is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
          is2=\E7\E[?6l\E[2K\E[?6h\E8,
          tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
  # The 4110 series may be a wonderful graphics series, but they make the 4025
  # look good for screen editing.  In the dialog area, you can't move the cursor
  # off the bottom line.  Out of the dialog area, ^K moves it up, but there
  # is no way to scroll.
  #
  # Note that there is a floppy for free from Tek that makes the
  # 4112 emulate the vt52 (use the vt52 termcap). There is also
  # an expected enhancement that will use ANSI standard sequences.
  #
  # 4112 in non-dialog area pretending to scroll. It really wraps
  # but vi is said to work (more or less) in this mode.
  #
  # 'vi' works reasonably well with this entry.
  #
  otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
          am,
          cols#80, lines#34,
          bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
          rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
  # The 4112 with the ANSI compatibility enhancement
  tek4112|tek4114|tektronix 4110 series,
          OTbs, am, db,
          cols#80, lines#34,
          cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
          ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
          ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
          rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
  tek4112-nd|4112 not in dialog area,
          OTns,
          cuu1=^K, use=tek4112,
  tek4112-5|4112 in 5 line dialog area,
          lines#5, use=tek4112,
  # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
  # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
  # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
  # previously \0410 and \0411 sequences...I don't *think* they were supposed
  # to be 4-digit octal -- esr)
  tek4113|tektronix 4113 color graphics with 5 line dialog area,
          OTbs, am, da, eo,
          cols#80, lines#5,
          clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
          flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
          is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
  tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
          lines#34,
          is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
  # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
  # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
  # :vb: needs enough delay to let you see the background color being toggled.
  tek4113-nd|tektronix 4113 color graphics with no dialog area,
          OTbs, am, eo,
          cols#80, it#8, lines#34,
          clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
          cvvis=\ELZ\EKA0,
          flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
          home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
          ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
  # This entry is from Tek. Inc.  (Brian Biehl)
  # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
  otek4115|Tektronix 4115,
          OTbs, am, da, db, eo,
          cols#80, it#8, lines#34,
          cbt=\E[Z, clear=\E[H\E[2J,
          cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
          cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
          el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
          il1=\E[L,
          is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
          kbs=^H, ri=\EM, rmam=\E[?7l,
          rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
          rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
          smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
          smul=\E[4m,
  tek4115|newer tektronix 4115 entry with more ANSI capabilities,
          am, xon,
          cols#80, lines#34,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
          cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
          ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
          il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
          rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
          rmso=\E[m, rmul=\E[m,
          sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
          sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          vpa=\E[%p1%{1}%+%dd,
  # The tek4125 emulates a vt100 incorrectly - the scrolling region
  # command is ignored.  The following entry replaces <csr> with the needed
  # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
-Line 16129
+Line 16354
 Line 16129
 Line 16354
  # Steve Jacobson 8/85
  # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
  # commented out, <smir>=\E1 because there's no <rmir>  -- esr)
  tek4125|tektronix 4125,
          lines#34,
          csr@, dl1=\E[1M, il1=\E[1L,
          is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
          rc@, sc@, smkx=\E=, use=vt100,
  # From: <jcoker@ucbic>
  # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
  # supplied another, less capable 4107 entry.  So we'll use that for 4107 and
  # note that if jcoker wasn't confused you may be able to use this one.
  # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
  tek4207|Tektronix 4207 graphics terminal with memory,
          am, bw, mir, msgr, ul, xenl,
          cols#80, it#8, lines#32,
          blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
          cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
          el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
          il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
          is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
          kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
          rev=\E[7m, ri=\E[T,
          rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
          rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
          smul=\E[4m, tbc=\E[1g,
  # From: <carolyn@dali.berkeley.edu>  Thu Oct 31 12:54:27 1985
  # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
  # Tab had been given as \E2I,that must be the tab-set capability -- esr)
  tek4404|tektronix 4404,
          OTbs,
          cols#80, it#8, lines#32,
          blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
          csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
          ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
          rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
          rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
          smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
          smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
  # Some unknown person wrote:
  # I added the is string - straight Unix has ESC ; in the login
  # string which sets a ct8500 into monitor mode (aka 4025 snoopy
  # mode). The is string here cleans up a few things (but not
  # everything).
  ct8500|tektronix ct8500,
          am, bw, da, db,
          cols#80, lines#25,
          bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
          cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
          dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
          il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
          rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
  # Tektronix 4205 terminal.
  #
-Line 16194
+Line 16419
 Line 16194
 Line 16419
  # Bold, dim, and standout are simulated by colors and thus not allowed
  # with colors.  The tektronix color table is mapped into the RGB color
  # table by setf/setb. All colors are reset to factory specifications by oc.
  # The <initc> cap uses RGB notation to define colors.  for arguments 1-3 the
  # interval (0-1000) is broken into 8 smaller sub-intervals (125).  Each sub-
  # interval then maps into pre-defined value.
  tek4205|tektronix 4205,
          ccc, mir, msgr,
          colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
          clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
          ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
          ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
          initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
          invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
          kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
          kf7=\ES,
          oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
          op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
          rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
          setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
          setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
          sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
          smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
          smul=\E[4m, tbc=\E[1g,
  #### Teletype (tty)
  #
-Line 16233
+Line 16458
 Line 16233
 Line 16458
  # other programs still default to emitting codes for the Model 37.
  #
  tty33|tty35|model 33 or 35 teletype,
          hc, os, xon,
          cols#72,
          bel=^G, cr=^M, cud1=^J, ind=^J,
  tty37|model 37 teletype,
          OTbs, hc, os, xon,
          bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
          ind=^J,
  # There are known to be at least three flavors of the tty40, all seem more
  # like IBM half duplex forms fillers than ASCII terminals.  They have lots of
-Line 16253
+Line 16478
 Line 16253
 Line 16478
  # a "newline" style terminal (-crmode) vi figures all it needs is nl
  # to get crlf, even if <cr> is not ^M.)
  # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
  tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
          OTbs, xon,
          cols#80, lines#24,
          clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
          cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
          ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
          ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
          kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
          rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
  tty43|model 43 teletype,
          OTbs, am, hc, os, xon,
          cols#132,
          bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
  #### Tymshare
  #
  # You can add <is2=\E<> to put this 40-column mode, though I can't
  # for the life of me think why anyone would want to.
  scanset|sc410|sc415|Tymshare Scan Set,
          am, bw, msgr,
          cols#80, lines#24,
          acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
          cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
          mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
  #### Volker-Craig (vc)
  #
-Line 16291
+Line 16516
 Line 16291
 Line 16516
  # Missing in vc303a and vc303 descriptions:  they scroll 2 lines at a time
  # every other linefeed.
  vc303|vc103|vc203|volker-craig 303,
          OTbs, OTns, am,
          cols#80, lines#24,
          bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
          cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
          kcuu1=^N, ll=\017$<1>W,
  vc303a|vc403a|volker-craig 303a,
          clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
          home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
  # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
  vc404|volker-craig 404,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
          cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
          ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
          kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
  vc404-s|volker-craig 404 w/standout mode,
          cud1=^J, rmso=^O, smso=^N, use=vc404,
  # From: <wolfgang@cs.sfu.ca>
  # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
  vc414|vc414h|Volker-Craig 414H in sane escape mode.,
          OTbs, am,
          cols#80, lines#24,
          clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
          cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
          dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
          ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
          kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
          kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
          lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
          rmso=\E^_, smso=\E^Y,
  vc415|volker-craig 415,
          clear=^L, use=vc404,
  ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
  #
-Line 16338
+Line 16563
 Line 16338
 Line 16563
  # delete line commands. Consequently, the resulting behavior looks like a
  # crude adm3a-type terminal.
  # Steve Jacobson 8/85
  pcplot|pc-plot terminal emulation program,
          xenl@,
          csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
  # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
  # I've found that my KayPro II, running MDM730, continues to emulate an
  # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
  # system the following termcap entry works well:
  # I have noticed a couple of minor glitches, but nothing I can't work
  # around. (I added two capabilities from the BRL entry -- esr)
  kaypro|kaypro2|kaypro II,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
          el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
  # From IBM, Thu May  5 19:35:27 1983
  # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
  ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
          cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
  ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
          OTbs, am, bw, eo, hs, km, msgr, ul,
          cols#80, it#8, lines#24,
          acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
          cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
          home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
          indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
          kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
          kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
          kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V,
          ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A,
          rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
          sgr0=\E[m, smso=\E[7m, smul=\E[4m,
  #### Apple II
  #
  # Apple II firmware console first, then various 80-column cards and
  # terminal emulators.  For two cents I'd toss all these in the UFO file
  # along with the 40-column apple entries.
  #
-Line 16391
+Line 16616
 Line 16391
 Line 16616
  # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
  #       'it#8' tells UNIX that you have tabs every 8 columns.  This is a
  #               function of TIC, not the firmware.
  #       The clear key on a IIgs will do something like clear-screen,
  #               depending on what you're in.
  appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
          OTbs, am, bw, eo, msgr,
          cols#80, it#8, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
          cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
          home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
          kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
          smso=^O,
  # Apple //e with 80-column card, entry from BRL
  # The modem interface is permitted to discard LF (maybe DC1), otherwise
  # passing characters to the 80-column firmware via COUT (PR#3 assumed).
-Line 16409
+Line 16634
 Line 16409
 Line 16634
  # Note: Cursor addressing is only available via the Pascal V1.1 entry,
  # not via the BASIC PR#3 hook.  All this nonsense can be avoided only by
  # using a terminal emulation program instead of the built-in firmware.
  apple2e|Apple //e,
          bw, msgr,
          cols#80, lines#24,
          bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
          ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
          is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
          nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
          smso=^O,
  # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
  # 4.20, with incoming and outgoing terminals both on 0, emulation On.
  apple2e-p|Apple //e via Pascal,
          cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
          kcud1=^J, use=apple2e,
  # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
  # Enable DC3/DC1 flow control with "stty ixon -ixany".
  apple-ae|ASCII Express,
          OTbs, am, bw, msgr, nxon, xon,
          cols#80, it#8, lines#24,
          bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
          cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
          home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
          kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
          smso=^O,
  appleII|apple ii plus,
          OTbs, am,
          cols#80, it#8, lines#24,
          clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
          cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
          ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
          is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
          smso=^O,
  # Originally by Gary Ford 21NOV83
  # From: <ee178aci%sdcc7@SDCSVAX.ARPA>  Fri Oct 11 21:27:00 1985
  apple-80|apple II with smarterm 80 col,
          OTbs, am, bw,
          cols#80, lines#24,
          cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
          cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
          ed=\013$<10*/>, el=\035$<10/>, home=^Y,
  apple-soroc|apple emulating soroc 120,
          am,
          cols#80, lines#24,
          bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
          home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
  # From Peter Harrison, Computer Graphics Lab, San Francisco
  #   ucbvax!ucsfmis!harrison  .....uucp
  #   ucbvax!ucsfmis!harrison@BERKELEY   .......ARPA
  # "These two work.  If you don't have the inverse video chip for the
  # Apple with videx then remove the :so: and :se: fields."
  # (apple-videx: this used to be called DaleApple -- esr)
  apple-videx|Apple with videx videoterm 80 column board with inverse video,
          OTbs, am, xenl,
          cols#80, it#8, lines#24,
          clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
          cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
          home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
          rmso=^Z2, sgr0=^Z2, smso=^Z3,
  # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
  #                             Apple Cat ][ 212 modem, + more all
  #                             controlled by ASCII Express: Pro.
  # From Dave Shaver <isucs1!shaver>
  apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
          OTbs, am, eo, xt,
          cols#80, lines#24,
          acsc=, clear=^L, cuf1=^\,
          cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
          flash=^W35^W06, home=^Y,
          is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
          rmso=^N, smso=^O,
  apple-uterm|Ultraterm for Apple micros,
          OTbs, am, eo, xt,
          cols#80, lines#24,
          acsc=, clear=^L, cuf1=^\,
          cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
          home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
  # from trwrba!bwong (Bradley W. Wong):
  #
  # This entry assumes that you are using an apple with the UCSD Pascal
-Line 16495
+Line 16720
 Line 16495
 Line 16720
  # a ^U and would thus preempt the more useful "up" function of vi.
  #
  # HMH 2/23/81
  apple80p|80-column apple with Pascal card,
          am, bw,
          cols#80, lines#24,
          clear=^Y^L, cuf1=^\\:,
          cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
          home=^Y, kcub1=^H,
  #
  # Apple II+ equipped with Videx 80 column card
  #
-Line 16515
+Line 16740
 Line 16515
 Line 16740
  # For inverse alternate character set add:
  #       <smacs>=^O:<rmacs>=^N:
  # (apple-v: added it#8 -- esr)
  apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
          am, xenl,
          cols#80, it#8, lines#24,
          bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
          cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
          cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
          ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
          khome=^Y, rmso=^Z2, smso=^Z3,
  apple-videx3|vapple|Apple II with 80 col card,
          OTbs, am,
          cols#80, lines#24,
          clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
          kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH,
  #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
  aepro|Apple II+ running ASCII Express Pro--vt52,
          OTbs,
          cols#80, lines#24,
          clear=\014$<300/>, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
          el=\EK, home=\EH,
  # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
  apple-vm80|ap-vm80|apple with viewmax-80,
          OTbs,
          cols#80, lines#24,
          clear=\014$<300/>, cuf1=^\\:,
          cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
          ed=\013$<300/>, el=^], home=\031$<200/>,
  #### Apple Lisa & Macintosh
  #
  # (lisa: changed <cvvis> to <cnorm> -- esr)
  lisa|apple lisa console display (black on white),
          OTbs, am, eo, msgr,
          cols#88, it#8, lines#32,
          acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
          cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
          ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
          is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
  liswb|apple lisa console display (white on black),
          is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
          smso=\E[m, smul=\E[4m, use=lisa,
  # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
  # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
-Line 16574
+Line 16799
 Line 16574
 Line 16799
  # Also setting the number of columns glitches the screen annoyingly.
  # You can type "reset" to get them set.
  #
  lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
          OTbs, OTpt, am, xenl, xon,
          OTkn#4, cols#80, it#8, lines#24, vt#3,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
          el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
          kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
          kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
          rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
          sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
          tbc=\E[3g,
  # Lisaterm in 132 column ("wide") mode.
  lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
          cols#132,
          kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
  # Although MacTerminal has insert/delete line, it is commented out here
  # since it is much faster and cleaner to use the "lock scrolling region"
  # method of inserting and deleting lines due to the MacTerminal implementation.
  # Also, the "Insert/delete ch" strings have an extra character appended to them
  # due to a bug in MacTerminal V1.1.  Blink is disabled since it is not
  # supported by MacTerminal.
  mac|macintosh|Macintosh with MacTerminal,
          xenl,
          OTdN#30,
          blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
  # Lisaterm in 132 column ("wide") mode.
  mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
          cols#132, use=mac,
+ # nsterm*|Apple_Terminal - AppKit Terminal.app
+ #
+ # Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and
+ # OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X
+ # Server and Mac OS X operating systems. There is also a
+ # "terminal.app" in GNUStep, but I believe it to be an unrelated
+ # codebase and I have not attempted to describe it here.
+ #
+ # For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you
+ # are pretty much on your own. Use "nsterm-7-m" and hope for the best.
+ # You might also try "nsterm-7" and "nsterm-old" if you suspect your
+ # version supports color.
+ #
+ # To determine the version of Terminal.app you're using by running:
+ #
+ #     echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION"
+ #
+ # For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm")
+ #
+ # For Apple_Terminal v71+/v100+, use "nsterm-bce".
+ #
+ # For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s".
+ #
+ # For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s".
+ #
+ # For all earlier versions (Apple_Terminal), try "nsterm-7-m"
+ # (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s"
+ # might work too, but really you're on your own here since these
+ # systems are very obsolete and I can't test them. I do welcome
+ # patches, though :).
+ # Other Terminals:
+ #
+ # For GNUstep_Terminal, you're probably best off using "linux" or
+ # writing your own terminfo.
+ # For MacTelnet, you're on your own. It's a different codebase, and
+ # seems to be somewhere between "vt102", "ncsa" and "xterm-color".
+ # For iTerm.app, see "iterm".
+ #
  # The AppKit Terminal.app descriptions all have names beginning with
  # "nsterm". Note that the statusline (-s) versions use the window
  # titlebar as a phony status line, and may produce warnings during
- # compilation as a result ("tsl uses 0 parameters, expected 1".) Ignore
+ # compilation as a result ("tsl uses 0 parameters, expected 1".)
- # these warnings, or even ignore these entries entirely. Apps which
+ # Ignore these warnings, or even ignore these entries entirely. Apps
- # need to position the cursor or do other fancy stuff inside the status
+ # which need to position the cursor or do other fancy stuff inside the
- # line won't work with these entries. They're primarily useful for
+ # status line won't work with these entries. They're primarily useful
- # programs like Pine which provide simple notifications in the status
+ # for programs like Pine which provide simple notifications in the
- # line. Please note that non-ASCII characters don't work right in the
+ # status line. Please note that non-ASCII characters don't work right
- # status line, since Terminal.app incorrectly interprets their Unicode
+ # in the status line, since Terminal.app incorrectly interprets their
- # codepoints as MacRoman codepoints.
+ # Unicode codepoints as MacRoman codepoints (in earlier Mac OS X
+ # versions) or only accepts status lines consisting entirely of
+ # characters from the first 256 Unicode positions (including C1 but
+ # not C0 or DEL.)
  #
+ # The Mythology* of AppKit Terminal.app:
+ #
+ # In the days of NeXTSTep 0.x and 1.x there were two incompatible
+ # bundled terminal emulators, Shell and Terminal. Scott Hess wrote a
+ # shareware replacement for Terminal called "Stuart" which NeXT bought
+ # and used as the basis for the Terminal.app in NeXTstep 2+,
+ # OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I
+ # don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or
+ # capabilities for the early versions, but I believe that the
+ # TERM_PROGRAM_VERSION may have been reset at some point.
+ #
+ # The early versions were tailored to the NeXT character set. Sometime
+ # after the Apple aquisition the encoding was swiched to MacRoman
+ # (initally with serious altcharset bugs due to incomplete conversion
+ # of the old NeXT code,) and then later to UTF-8. Alos sometime during
+ # or just prior to the early days of Mac OS X, the Terminal grew ANSI
+ # 8-color support (initially buggy when combined with attributes, but
+ # that was later fixed.) More recently, around Mac OS X version 10.3
+ # or so (Terminal.app v100+) xterm-like 16-color support was added. In
+ # some versions (for instance 133-1 which shipped with Mac OS X
+ # version 10.4) this suffered from the <bce> bug, but that seems to
+ # have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+).
+ #
+ # In the early days of Mac OS X the terminal was fairly buggy and
+ # would routinely crash under load. Many of these bugs seem to have
+ # been fixed around Mac OS X version 10.3 (Terminal.app v100+) but
+ # some may still remain. This change seems to correspond to
+ # Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as
+ # it did previously.
+ #
+ # * This may correspond with what actually happened, but I don't
+ #   know. It is based on guesswork, hearsay, private correspondence,
+ #   my faulty memory, and the following online sources and references:
+ #
+ # [1] "Three Scotts and a Duane" by Simson L. Garfinkel
+ # http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html
+ #
+ # [2] NeXTSTEP entry from Wikipedia, the free encyclopedia
+ # https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep
+ #
  # * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to
  #   "nsterm" to comply with the name length and case conventions and
  #   limitations of various software packages [notably Solaris terminfo
-Line 16706
+Line 17016
 Line 16706
 Line 17016
  #     export TERM
  #     if [ :"$TERM_PROGRAM_VERSION" = :41 ]
  #     then
- #         TERM="nsterm"
+ #         TERM="nsterm-old"
  #     else
  #         TERM="nsterm-c-7"
  #     fi
-Line 16717
+Line 17027
 Line 16717
 Line 17027
  # if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then
  #     if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then
  #          if ( :"$TERM_PROGRAM_VERSION" == :41 ) then
- #              setenv TERM "nsterm"
+ #              setenv TERM "nsterm-old"
  #          else
  #              setenv TERM "nsterm-c-7"
  #          endif
-Line 16734
+Line 17044
 Line 16734
 Line 17044
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
          home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
-         kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
+         invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
-         kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l,
+         kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM,
-         rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
+         rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
-         sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m,
+         sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m,
          sgr0=\E[m\017, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys,
  nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          enacs=\E(B\E)0, rmacs=^O,
-         sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+         sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          smacs=^N, use=nsterm+7,
  nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset,
          acsc=0#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245+\335-\366\,\334.\377,
          enacs=\E(B\E)0, rmacs=^O,
-         sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
+         sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          smacs=^N, use=nsterm+7,
  nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support,
-Line 16813
+Line 17123
 Line 16813
 Line 17123
  nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline),
          use=nsterm+s, use=nsterm+mac,
- nsterm|Apple_Terminal|AppKit Terminal.app v41+ w/MacRoman charset (color),
+ nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color),
          use=nsterm+c41, use=nsterm+mac,
  nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color),
-Line 16825
+Line 17135
 Line 16825
 Line 17135
  nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline),
          use=nsterm+s, use=nsterm+c, use=nsterm+mac,
+ # In Mac OS X version 10.5 the format of the preferences has changed
+ # and a new, more complex technique is needed, e.g.,
+ #
+ #       python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass(
+ #       "NSUserDefaults");ud=NSUserDefaults.alloc();
+ #       ud.init();prefs=ud.persistentDomainForName_(
+ #       "com.apple.Terminal");prefs["Window Settings"][
+ #       prefs["Default Window Settings"]]["TerminalType"
+ #       ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs,
+ #       "com.apple.Terminal")' nsterm-16color
+ #
+ # and it is still not settable from the preferences dialog. This is
+ # tracked under rdar://problem/7365108 and rdar://problem/7365134
+ # in Apple's bug reporter.
+ nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5,
+         bw@, mir, npc,
+         civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P,
+         flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG,
+         ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F,
+         kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
+         kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
+         kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~,
+         kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
+         knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
+         smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd,
+         use=nsterm-c-s-acs,
+ # The versions of Terminal.app in Mac OS X version 10.3.x seem to have
+ # the background color erase bug. The newer version 240.2 in Mac OS X
+ # version 10.5 does not.
+ #
  # This entry is based on newsgroup comments by Alain Bench, Christian Ebert,
  # and D P Schreber comparing to nsterm-c-s-acs.
  #
- # D P Schreber notes that $TERM can be set in Terminal.app, e.g.,
+ # In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM
- #       defaults write com.apple.Terminal TermCapString nsterm-c-s-acs
+ # can be set in Terminal.app, e.g.,
+ #
+ #       defaults write com.apple.Terminal TermCapString nsterm-bce
+ #
  # and that it is not set in Terminal's preferences dialog.
- nsterm-16color|AppKit Terminal.app v100.1.8 with MacOS X 10.3.9,
+ nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce),
-         kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
+         bce, bw, use=nsterm-16color,
-         kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
-         knp=\E[6~, kpp=\E[5~, use=nsterm-c-s-acs,
+ # This is an alias which should always point to the "current" version
+ nsterm|Apple_Terminal|AppKit Terminal.app,
+         use=nsterm-16color,
+ # iTerm.app from http://iterm.sourceforge.net/ is an alternative (and
+ # more featureful) terminal emulator for Mac OS X. It is similar
+ # enough in capabilities to nsterm-16color that I have derived this
+ # description from that one, but as far as I know they share no code.
+ # Many of the features are user-configurable, but I attempt only to
+ # describe the default configuration.
+ #
+ # NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is
+ # disabled.
+ iTerm.app|iTerm.app terminal emulator for Mac OS X,
+         bce, bw@, ccc@,
+         csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color,
+         use=nsterm-16color,
  # xnuppc - Darwin PowerPC Console (a.k.a. "darwin")
  #
  # On PowerPC platforms, Apple's Darwin operating system uses a
-Line 17111
+Line 17470
 Line 17111
 Line 17470
  # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
  # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
  # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
  coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
          OTbs, am,
          cols#80, it#8, lines#24,
          bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
          clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
          cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
          dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
          kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
          sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
  # (trs2: removed obsolete ":nl=^_:" -- esr)
  trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
          OTbs, am, msgr,
          cols#80, it#8, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
          el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
          kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
  # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
  # (This had extension capabilities
  #       :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
  #       :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
  # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
  trs16|trs-80 model 16 console,
          OTbs, am,
          cols#80, it#8, lines#24,
          acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
          cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
          dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
          ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
          kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
          khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
          lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
          smacs=\ERG, smso=\ERD,
- #### Atari ST
- #
- # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
- atari|atari st,
-         OTbs, am,
-         cols#80, it#8, lines#25,
-         clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
-         cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
-         ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
-         kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
- # UniTerm terminal program for the Atari ST:  49-line VT220 emulation mode
- # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
- uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
-         lines#49,
-         is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H,
-         use=vt220,
- # MiNT VT52 emulation. 80 columns, 25 rows.
- # MiNT is Now TOS, the operating system which comes with all Ataris now
- # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
- # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
- # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
- st52|Atari ST with VT52 emulation,
-         am, km,
-         cols#80, lines#25,
-         bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
-         cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
-         cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
-         ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
-         kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
-         kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
-         kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
-         kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
-         ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
-         smcup=\Ee, smso=\Ep,
  #### Commodore Business Machines
  #
  # Formerly located in West Chester, PA; went spectacularly bust in 1994
-Line 17209
+Line 17532
 Line 17209
 Line 17532
  # :k0=\E9~:     map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
  # (amiga: removed obsolete :kn#10:,
  # also added empty <acsc> to suppress a warning --esr)
  amiga|Amiga ANSI,
          OTbs, am, bw, xenl,
          cols#80, lines#24,
          acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
          civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
          cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
          cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
          ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
          indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
          kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
          kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
          ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
          rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
  # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
  # (amiga: added empty <acsc> to suppress a warning.
  # I'm told this entry screws up badly with AS225, the Amiga
  # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
  amiga-h|Hans Verkuil's Amiga ANSI,
          OTbs, bw, msgr,
          cols#80, lines#24,
          acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
          civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
          cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
          cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
          cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
          dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
          home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
          indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
          kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
          kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
          kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
          kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
          rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
          rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
          smso=\2337m, smul=\2334m,
  # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
  #
-Line 17256
+Line 17579
 Line 17256
 Line 17579
  #       End     Shift+Right
  #       PgUp    Shift+Up
  #       PgDn    Shift+Down
  amiga-8bit|Amiga ANSI using 8-bit controls,
          acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
          ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S,
          kpp=\233T, ri=\215, rin@, use=amiga-h,
  # From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000
  # requires use of appropriate preferences settings.
  amiga-vnc|Amiga using VNC console (black on light gray),
          am, da, db, msgr, ndscr,
          btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256,
          bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p,
          clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
          dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G,
          ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
          indn=\E[%p1%dS, invis=\E8m,
          is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
          kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~,
          kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~,
          kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~,
          kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m,
          rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J,
          rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec,
          rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h,
          setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m,
          setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m,
          sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h,
          smso=\E[1m, smul=\E[4m,
  # MorphOS on Genesi Pegasos
  # By Pavel Fedin <sonic_amiga@rambler.ru>
-Line 17309
+Line 17632
 Line 17309
 Line 17632
  #       Anybody got any ideas? Here's my termcap.
  # DAG -- I changed his "^n" entries to "\n"; see if that works.
  #
  commodore|b-128|Commodore B-128 micro,
          am, bw,
          OTdN#20, cols#80, lines#24, pb#150,
          OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
          cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
          dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
          home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
          kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
          smir=,
  #### North Star
  #
  # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
  northstar|North Star Advantage,
          OTbs,
          cols#80, lines#24,
          clear=\004$<200/>,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
          el=\016$<200/>, home=\034\032$<200/>,
  #### Osborne
  #
  # Thu Jul  7 03:55:16 1983
  #
  # As an aside, be careful; it may sound like an anomaly on the
  # Osborne, but with the 80-column upgrade, it's too easy to
  # enter lines >80 columns!
  #
  # I've already had several comments...
  # The Osborne-1 with the 80-col option is capable of being
  # 52, 80, or 104 characters wide; default to 80 for compatibility
  # with most systems.
  #
  # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
  osborne-w|osborne1-w|osborne I in 104-column mode,
          msgr, ul, xt,
          cols#104, lines#24,
          bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
          kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
  # Osborne I     from ptsfa!rhc (Robert Cohen) via BRL
  osborne|osborne1|osborne I in 80-column mode,
          OTbs, am, mir, msgr, ul, xhp,
          OTdB#4, cols#80, lines#24,
          clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
          dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
          kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
          rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
  #
  # Osborne Executive definition from BRL
  # Similar to tvi920
  # Added by David Milligan and Tom Smith (SMU)
  osexec|Osborne executive,
          OTbs, am,
          OTug#1, cols#80, lines#24, xmc#1,
          OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
          is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
          kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
          kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
          kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
          smul=\El, tbc=\E3,
  #### Console types for obsolete UNIX clones
  #
-Line 17383
+Line 17706
 Line 17383
 Line 17706
  # Memory-segmentation limits and a strong tendency to look like V7 long after
  # it was obsolete made all three pretty lame.  Venix croaked early.  Coherent
  # and Minix were ported to 32-bit Intel boxes, only to be run over by a
  # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
  # Coherent's vendor, the Mark Williams Company, went belly-up in 1994.  There
  # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
  # even as single processes under SunOS and the Macintosh OS.
  #
+ # See
+ #       http://www.minix3.org/manpages/man4/console.4.html
+ minix|minix console (v3),
+         use=ecma+color, use=minix-1.7,
+ # See
+ #       http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html
  # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
- minix|minix console (v1.7),
+ minix-1.7|minix console (v1.7),
          am, xenl,
          cols#80, it#8, lines#25,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
-         dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
+         dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K,
-         ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
+         home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
-         is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
+         il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B,
-         kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
+         kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U,
-         kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
+         kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp,
-         lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
+         lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J,
-         rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
+         rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m,
+         smso=\E[7m, smul=\E[4m,
  # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
- minix-old|minix console (v1.5),
+ minix-old|minix-1.5|minix console (v1.5),
          xon,
          cols#80, it#8, lines#25,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
          ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
          kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
          kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
          khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
          rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
  # The linewrap option can be specified by editing /usr/include/minix/config.h
  # before recompiling the minix 1.5 kernel.
  minix-old-am|minix console with linewrap,
          am, use=minix-old,
  pc-minix|minix console on an Intel box,
          use=klone+acs, use=minix,
  # According to the Coherent 2.3 manual, the PC console is similar
  # to a z19. The differences seem to be (1) 25 lines, (2) no status
  # line, (3) standout is broken, (4) ins/del line is broken, (5)
  # has blinking and bold.
  pc-coherent|pcz19|coherent|IBM PC console running Coherent,
          am, mir,
          cols#80, it#8, lines#25,
          bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
          ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
          rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
  # According to the Venix 1.1 manual, the PC console is similar
  # to a DEC vt52.  Differences seem to be (1) arrow keys send
  # different strings, (2) enhanced standout, (3) added insert/delete line.
  # Note in particular that it doesn't have automatic margins.
  # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
  # not described here because this derives from an old termcap entry.
  pc-venix|venix|IBM PC console running Venix,
          cols#80, it#8, lines#25,
          bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
          ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
          kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
  #### Miscellaneous microcomputer consoles
  #
-Line 17458
+Line 17789
 Line 17458
 Line 17789
  #
  # The MAI Basic Four computer was obsolete at the end of the 1980s.
  # It may be used as a terminal by putting it in "line" mode as seen on
  # one of the status lines.
  # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
  # Hardware tabs set by <if> at 8-spacing.  Auto line wrap causes glitches so
  # wrap mode is reset by <cvvis>.  Using <ind>=\E[S caused errors so I
  # used \ED instead.
  # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
  mai|basic4|MAI Basic Four in ansi mode,
          am, da, db, mir, msgr,
          cols#82, it#8, lines#25,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
          cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
          cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
          dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
          if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED,
          is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
          kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
          rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
          smir=\E[4h, smso=\E[7m, smul=\E[4m,
  # basis from Peter Harrison, Computer Graphics Lab, San Francisco
  #   ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
  #
  # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
  # The Basis 108 was a Apple II clone, manufactured by the "Basis
  # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
  # about 1,5 km from where I live, but doesn't build own computers any
  # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
  # equipped with one or two 5.25" disk drives, had a monochrome and colour
-Line 17495
+Line 17826
 Line 17495
 Line 17826
  # and data recording for our school's experimental solar panel :), Apple DOS
  # or CP/M.
  # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
  basis|BASIS108 computer with terminal translation table active,
          clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
          kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
          smso=\E(, use=adm3a,
  # luna's BMC terminal emulator
  luna|luna68k|LUNA68K Bitmap console,
          cols#88, lines#46, use=ansi-mini,
  megatek|pegasus workstation terminal emulator,
          am, os,
          cols#83, lines#60,
  # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
  # interface (pre-Macintosh by several years) that went nowhere.
  xerox820|x820|Xerox 820,
          am,
          cols#80, lines#24,
          bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
          home=^^, ind=^J,
  #### Videotex and teletext
  #
-Line 17525
+Line 17856
 Line 17525
 Line 17856
  # \E)0          G1 DEC set (line graphics)
  #
  # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
  m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
          OTbs, eslok, hs, xenl,
          cols#80, it#8, lines#24, wsl#72, xmc#0,
          acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
          blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
          cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
          home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>,
          is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
          is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
          kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
          kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
          kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
          mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
          rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
          rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
          smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
          u6=\E[%i%d;%dR, u7=\E[6n,
  # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
  #
  minitel1|minitel 1,
          am, bw, eslok, hs, hz, msgr,
          colors#8, cols#40, lines#24, pairs#8,
          acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
          cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
          cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
          enacs=^Y, fsl=^J, home=^^, ind=^J,
          is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
          rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
          setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
          sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
          sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
  # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
  minitel1b|minitel 1-bistandard (in 40cols mode),
          mir,
          cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
          cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
          is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
          kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
          smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1,
  # <rmkx> posait des problemes (logout en sortant de vi).
  minitel1b-80|minitel 1-bistandard (standard teleinformatique),
          am@, bw@, hz@,
          colors@, cols#80, it#8, pairs@,
          blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
          clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
          ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
          kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
          kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
          ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
          sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
          sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b,
  ######## OBSOLETE VDT TYPES
  #
-Line 17597
+Line 17928
 Line 17597
 Line 17928
  # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
  # but these caps were commented out in 8.3; also, removed overridden
  # ":do=^J:" -- esr)
  abm80|amtek business machines 80,
          OTbs, am, bw,
          cols#80, lines#24,
          cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
          cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
          dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
  #### Bell Labs blit terminals
  #
  # These were AT&T's official entries.  The 5620 FAQ maintained by
  # David Breneman <daveb@dgtl.com> has this to say:
  #
  #  Actually, in the beginning was the Jerq, and the Jerq was white with a
-Line 17627
+Line 17958
 Line 17627
 Line 17958
  # 730, and 730+.)
  #
  blit|jerq|blit running teletype rom,
          am, eo, ul, xon,
          cols#87, it#8, lines#72,
          bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
          cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
          dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
          dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
          il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
  # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
  cbblit|fixterm|blit running columbus code,
          cols#88,
          ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
          rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
          smul=\EU", use=blit,
  oblit|ojerq|first version of blit rom,
          am, da, db, eo, mir, ul, xon,
          cols#88, it#8, lines#72,
          bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
          cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
          dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
          ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
          smir=\EQ,
  #### Bolt, Beranek & Newman (bbn)
  #
-Line 17670
+Line 18001
 Line 17670
 Line 18001
  # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
  # Beranek and Neuman) sold at most a few hundred of them to the real
  # world.  DOD may have bought more...
  #
  # Entries for the BitGraph terminals.  The problem
  # with scrolling in vi can only be fixed by getting BBN to put
  # smarter scroll logic in the terminal or changing vi or padding
  # scrolls with about 500 ms delay.
  #
  # I always thought the problem was related to the terminal
  # counting newlines in its input buffer before scrolling and
  # then moving the screen that much. Then vi comes along and
  # paints lines in on the bottom line of the screen, so you get
  # this big white gap.
  bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
          flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
          use=bg2.0,
  bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
          flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
          use=bg2.0,
  bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
          OTbs, xenl,
          cols#85, lines#64,
          bel=^G, clear=\E[H\E[J$<150>, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
          ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
          ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
          kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
          lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
          sgr0=\E[m, smkx=\E=, smso=\E[7m,
  bg1.25rv|bbn bitgraph 1.25 (reverse video),
          flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
          use=bg1.25,
  bg1.25nv|bbn bitgraph 1.25 (normal video),
          flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
          use=bg1.25,
  # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
  bg1.25|bbn bitgraph 1.25,
          cols#85, lines#64,
          bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
          cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
          dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
          il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
          lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
          rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
          smso=\E[7m,
  #### Bull (bq, dku, vip)
  #
-Line 17786
+Line 18117
 Line 17786
 Line 18117
  # This entry covers the following terminals:
  # dku7102, tws2102, and tws models 2105 to 2112
  tws-generic|dku7102|Bull Questar tws terminals,
          am, eslok, hs, mir, msgr, xenl, xhp@, xon,
          cols#80, it#8, lines#24, wsl#80,
          acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
          bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
          cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
          cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
          dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
          dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
          fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
          il1=\E[L, ind=^J, invis=\E[0;8m,
          is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
          is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
          is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
          ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
          kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
          kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
          khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
          mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
          rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
          rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
          sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
          sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
          smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g,
          tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
  tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
          dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
          use=tws-generic,
  tws2103|xdku|BULL Questar tws2103,
          ht=^I, use=tws-generic,
  tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
          ht=^I, use=tws2102-sna,
  dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
          clear=\E[2J\E[H, cup@, dl@, dl1@,
          dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
          il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
          use=tws-generic,
  dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
          blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
          smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic,
  #=========================================================#
  # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
-Line 17837
+Line 18168
 Line 17837
 Line 18168
  #       Copyright (c) 1989 BULL SA
  #---------------------------------------------------------------------------
  #  This entry is used for terminals with vt320 emulation mode
  #  and following set-up :
  #    8 bit ISO Latin Character Set (ISO 8859-1),
  #    7 bit Control Characters,
  #    80 columns screen.
  #  Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
  #  They are used in string capabilities with vt220-320 emulation mode.
  #  In the following DEC definitions, two kinds of terminfo databases are
  #    provided :
  #    1. the first with Command Sequence Introducer starting with escape
  #       sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
  #    2. the second with Command Sequence Introducer starting with escape
  #       sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
  #       Soft Terminal Reset             esc [ ! p
  #       RIS (erases screen):            esc c
-Line 17882
+Line 18213
 Line 17882
 Line 18213
  #       RM DECAWM auto right margin:    esc [ ? 7 l
  #       SM DECARM auto repeat:          esc [ ? 8 h
  #       RM DECARM auto repeat:          esc [ ? 8 l
  #       DECSASD Select active main:     esc [ 0 $ }
  #       DECSASD Select active status:   esc [ 1 $ }
  #       DECSSDT Select status none:     esc [ 0 $ ~
  #       DECSSDT Select status indic.:   esc [ 1 $ ~
  #       DECSSDT Select status host-wr:  esc [ 2 $ ~
  #       SM DECTCEM Visible cursor:      esc [ ? 2 5 h
  #       RM DECTCEM Invisible cursor:    esc [ ? 2 5 l
  #       SM DECNCRM 7 bits NCR set:      esc [ ? 4 2 h
-Line 17905
+Line 18236
 Line 17905
 Line 18236
  #
  # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
  bq300|Bull vt320 ISO Latin 1 80 columns terminal,
          am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
          dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J,
          el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
          flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
          hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
          is1=\E[63;1"p\E[2h,
          is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
          is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
          kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
          kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
          kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
          kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
          kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
          khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
          krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
          mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
          ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
          rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
          rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
          sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
          sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h,
          smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
  bq300-rv|Bull vt320 reverse 80 columns,
          flash=\E[?5l$<50>\E[?5h,
          is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
          use=bq300,
  bq300-w|Bull vt320 132 columns,
          cols#132, wsl#132,
          is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
          rs2=\E[?3h, use=bq300,
  bq300-w-rv|Bull vt320 reverse mode 132 columns,
          cols#132, wsl#132,
          flash=\E[?5l$<50>\E[?5h,
          is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
          rs2=\E[?3h, use=bq300,
  #  This entry is used for terminals with vt320 emulation mode
  #  and following set-up :
  #    8 bit ISO Latin Character Set (ISO 8859-1),
  #    8 bit Control Characters, (CSI coded as x9B for ESC [)
  #    80 columns screen.
  #       Soft Terminal Reset             csi ! p
  #       RIS (erases screen):            esc c
  #       DECKPNM numeric keypad mode:    esc >
-Line 17990
+Line 18321
 Line 17990
 Line 18321
  #       RM DECAWM auto right margin:    csi ? 7 l
  #       SM DECARM auto repeat:          csi ? 8 h
  #       RM DECARM auto repeat:          csi ? 8 l
  #       DECSASD Select active main:     csi 0 $ }
  #       DECSASD Select active status:   csi 1 $ }
  #       DECSSDT Select status none:     csi 0 $ ~
  #       DECSSDT Select status indic.:   csi 1 $ ~
  #       DECSSDT Select status host-wr:  csi 2 $ ~
  #       SM DECTCEM Visible cursor:      csi ? 2 5 h
  #       RM DECTCEM Invisible cursor:    csi ? 2 5 l
  #       SM DECNCRM 7 bits NCR set:      csi ? 4 2 h
-Line 18006
+Line 18337
 Line 18006
 Line 18337
  # with:  0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
  # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
  # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
  bq300-8|Bull vt320 full 8 bits 80 columns,
          am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3, wsl#80,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
          clear=\233H\233J, cnorm=\233?25h, cr=^M,
          csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
          cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
          dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM,
          dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J,
          el=\233K, el1=\2331K, enacs=\E(B\E)0,
          flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H,
          ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, ind=\ED,
          is1=\E[63;2"p\E[2h,
          is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
          is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
          ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
          kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
          kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
          kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
          kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
          kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
          kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
          khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
          krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
          lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
          rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
          rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
          rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
          sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
          sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
          smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
          smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
  bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
          flash=\233?5l$<50>\233?5h,
          is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
          use=bq300-8,
  bq300-8w|Bull vt320 8-bit 132 columns,
          cols#132, wsl#132,
          is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
          rs2=\233?3h, use=bq300-8,
  bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
          cols#132, wsl#132,
          flash=\233?5l$<50>\233?5h,
          is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
          rs2=\233?3h, use=bq300-8,
  #  This entry is used for terminals with vt320 emulation mode
  #  a 102 keys keyboard (PC scancode !) and following set-up :
  #    8 bit ISO Latin Character Set (ISO 8859-1),
  #    7 bit Control Characters,
  #    80 columns screen.
  bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
          kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
          kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
          kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
          kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
          kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
          krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300,
  bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
          flash=\E[?5l$<50>\E[?5h,
          is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
          use=bq300-pc,
  bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
          cols#132, wsl#132,
          is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
          rs2=\E[?3h, use=bq300-pc,
  bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
          cols#132, wsl#132,
          flash=\E[?5l$<50>\E[?5h,
          is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
          rs2=\E[?3h, use=bq300-pc,
  #    8 bit ISO Latin Character Set (ISO 8859-1),
  #    8 bit Control Characters,
  #    80 columns screen.
  bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
          kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
          kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
          kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
          kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
          kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
          khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
          kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8,
  bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
          flash=\E[?5l$<50>\E[?5h,
          is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
          use=bq300-8-pc,
  bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
          cols#132, wsl#132,
          is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
          rs2=\E[?3h, use=bq300-8-pc,
  bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
          cols#132, wsl#132,
          flash=\E[?5l$<50>\E[?5h,
          is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
          rs2=\E[?3h, use=bq300-8-pc,
  #======================================================#
  # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
-Line 18156
+Line 18487
 Line 18156
 Line 18487
  #           reset :                     ^{
  #
  # This covers the vip7800 and BQ3155-vip7800
  vip|Bull Questar 3155-7800,
          am, eslok, hs, km, mc5i, msgr, xenl, xon,
          cols#80, it#8, lines#24, vt#3, wsl#80,
          acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
          cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
          dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
          flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
          hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
          is2=\E[00u\E[<>001001024080024080u\E[01u,
          is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
          kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
          kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
          kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
          kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
          kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
          kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
          kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
          khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
          kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
          lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
          mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
          ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
          rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
          sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
          smul=\Es_, tbc=\E[N, tsl=\Ew,
  # normal screen, 8 bits, 132 columns terminal.
  vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
          cols#132, wsl#132,
          is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
  vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
          lines#72,
          is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
  vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
          cols#132, lines#72, wsl#132,
          is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
  #### Chromatics
  #
  # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
  # that is smaller than the screen, and puts up a warning message
  # outside the window. Te erases the warning message, puts the
  # window back to be the whole screen, and puts the cursor at just
  # below the small window. I defined <cnorm> and <civis> to really turn
  # the cursor on and off, but I have taken this out since I don't
  # like the cursor being turned off when vi exits.
  cg7900|chromatics|chromatics 7900,
          am,
          cols#80, lines#40,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
          cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
          ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
          rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
          rmso=\001C1\,\001c2\,,
          smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
          smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
  #### Computer Automation
  #
  ca22851|computer automation 22851,
          am,
          cols#80, lines#24,
          bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
          cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
          kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
  #### Cybernex
  #
  # This entry has correct padding and the undocumented "ri" capability
  cyb83|xl83|cybernex xl-83,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
          cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
          ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
          kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
  # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
  cyb110|mdl110|cybernex mdl-110,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
          cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
          dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
          ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
          ht=\011$<43>, ich1=\016A\035$<3.5>,
          il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
  #### Datapoint
  #
-Line 18254
+Line 18585
 Line 18254
 Line 18585
  # side of Datapoint still lives (1995) in the form of Intelogic Trace.
  #
  dp3360|datapoint|datapoint 3360,
          OTbs, am,
          cols#82, lines#25,
          bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
          ed=^_, el=^^, home=^], ind=^J,
  # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
  # The Datapoint 8242 Workstation was sold at least between 1985
  # and 1989. To make the terminal work with this entry, press
  # CONTROL-INT-INT to take the terminal off-line, and type (opt).
  # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
  # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
  # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
  # fact unusable because the strings sent by the terminal conflict
  # with other keys).
  # The terminal is capable of displaying "box draw" characters.
  # For each graphic character you must send 2 ESC's (\E\E) followed
  # by a control character as follows:
  #         character        meaning
  #         =========        =======
  #         ctrl-E           top tee
-Line 18285
+Line 18616
 Line 18285
 Line 18616
  #         ctrl-M           bottom right corner
  #         ctrl-N           horizontal line
  #         ctrl-O           vertical line
  # Unfortunately this cannot be fitted into the termcap/terminfo
  # description scheme.
  dp8242|datapoint 8242,
          msgr,
          cols#80, lines#25,
          bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
          cr=^M, cub1=^H, cud1=^J,
          cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
          home=^U, ht=^I, il1=\E^T, ind=^C,
          is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
          kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
          kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
          kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
          rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
          rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
          smso=\E^E, smul=\E^F,
          wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
  #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
  #
  # These entries are DEC's official terminfos for its older terminals.
  # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
  # Engineering for more information.  Updated terminfos and termcaps
  # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
  #
  gt40|dec gt40,
          OTbs, os,
          cols#72, lines#30,
          bel=^G, cr=^M, cub1=^H, cud1=^J,
  gt42|dec gt42,
          OTbs, os,
          cols#72, lines#40,
          bel=^G, cr=^M, cub1=^H, cud1=^J,
  vt50|dec vt50,
          OTbs,
          cols#80, lines#12,
          bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
  vt50h|dec vt50h,
          OTbs,
          cols#80, lines#12,
          bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
          el=\EK, ht=^I, ind=^J, ri=\EI,
  # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
  vt61|vt-61|vt61.5|dec vt61,
          cols#80, lines#24,
          bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
          cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
          cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
          ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
          ri=\E$<20>I,
  # The gigi does standout with red!
  # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
  gigi|vk100|dec gigi graphics terminal,
          OTbs, am, xenl,
          cols#84, lines#24,
          bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
          el=\E[K, ht=^I, ind=^J,
          is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
          kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
          rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
          smul=\E[4m,
  # DEC PRO-350 console (VT220-style).  The 350 was DEC's attempt to produce
  # a PC differentiated from the IBM clones.  It was a total, ludicrous,
  # grossly-overpriced failure (among other things, DEC's OS didn't include
  # a format program, so you had to buy pre-formatted floppies from DEC at
  # a hefty premium!).
  pro350|decpro|dec pro console,
          OTbs,
          cols#80, it#8, lines#24,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
          el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
          kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
          rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
  dw1|decwriter I,
          OTbs, hc, os,
          cols#72,
          bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
  dw2|decwriter|dw|decwriter II,
          OTbs, hc, os,
          cols#132,
          bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
  # \E(B          Use U.S. character set (otherwise # => british pound !)
  # \E[20l        Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
  # \E[w          10 char/in pitch
-Line 18390
+Line 18721
 Line 18390
 Line 18721
  # \E[4g         clear vertical tab stops
  # \E>           disable alternate keypad mode (so it transmits numbers!)
  # \E[%i%p1%du   set tab stop at column %d (origin == 1)
  #               (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
  #               a tab stop)
  #
  #       The dw3 does standout with wide characters.
  #
  dw3|la120|decwriter III,
          OTbs, hc, os,
          cols#132,
          bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
          is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
          is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
          kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
  dw4|decwriter IV,
          OTbs, am, hc, os,
          cols#132,
          bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
          kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
  # These aren't official
  ln03|dec ln03 laser printer,
          hc,
          cols#80, lines#66,
          bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
          rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
          smul=\E[4m,
  ln03-w|dec ln03 laser printer 132 cols,
          cols#132,
          bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
          kcud1=^J, nel=^M^J, use=ln03,
  #### Delta Data (dd)
  #
-Line 18427
+Line 18758
 Line 18427
 Line 18758
  # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
  # There are BSD-derived termcap entries floating around for this puppy
  # that are *certainly* wrong.
  delta|dd5000|delta data 5000,
          OTbs, am,
          cols#80, lines#27,
          bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
          cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
          cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
  #### Digital Data Research (ddr)
  #
  # (ddr: I added <rmam>/<smam> based on the init string -- esr)
  ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
          OTbs, am, xenl,
          cols#80, it#8, lines#24, vt#3,
          blink=\E[5m$<2/>, bold=\E[1m$<2/>,
          clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
          cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
          cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
          ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
          kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
          kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
          rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
          rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
          rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
          sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
          smul=\E[4m$<2/>,
  #### Evans & Sutherland
  #
-Line 18468
+Line 18799
 Line 18468
 Line 18799
  # are out of production, though of course E&S is very much alive (in 1996).
  # (ps300: changed ":pt@:" to "it@" -- esr)
  #
  ps300|Picture System 300,
          xt,
          it@,
          rmso@, rmul@, smso@, smul@, use=vt100,
  #### General Electric (ge)
  #
  terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
          OTbs, hc, os,
          cols#120,
          bel=^G, cr=^M, cud1=^J, ind=^J,
  #### Heathkit/Zenith
  #
-Line 18488
+Line 18819
 Line 18488
 Line 18819
  #
  # S401
  # 0-3 = baud rate as follows:
  #
  #         3       2       1       0
  #       ---     ---     ---     ---
  #         0       0       1       1       300 baud
  #         0       1       0       1       1200 baud
  #         1       0       0       0       2400 baud
  #         1       0       1       0       4800 baud
  #         1       1       0       0       9600 baud
  #         1       1       0       1       19.2K baud
  #
  # 4 = parity (0 = no parity)
  # 5 = even parity (0 = odd parity)
  # 6 = stick parity (0 = normal parity)
  # 7 = full duplex (0 = half duplex)
  #
  # S402
  # 0 = block cursor (0 = underscore cursor)
  # 1 = no key click (0 = keyclick)
  # 2 = wrap at end of line (0 = no wrap)
-Line 18512
+Line 18843
 Line 18512
 Line 18843
  # 5 = ANSI mode (0 = VT52 mode)
  # 6 = keypad shifted (0 = keypad unshifted)
  # 7 = 50Hz refresh (1 = 60Hz refresh)
  #
  # Factory Default settings are as follows:
  #          7 6 5 4 3 2 1 0
  # S401     1 0 0 0 1 1 0 0
  # S402     0 0 0 0 0 0 0 0
  # (h19: I added <rmam>/<smam> based on the init string;
  # also added empty <acsc> to suppress a tic warning -- esr)
  h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
          OTbs, am, mir, msgr,
          cols#80, it#8, lines#24,
          acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
          cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
          cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
          ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
          is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
          kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
          kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
          kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
          ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
          smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
  h19-bs|heathkit w/keypad shifted,
          rmkx=\Eu, smkx=\Et, use=h19-b,
  h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
          rmkx=\Eu, smkx=\Et, use=h19-u,
  # (h19: merged in <ip> from BSDI hp19-e entry>;
  # also added empty <acsc> to suppress a tic warning --esr)
  # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
  # Tim tells us that:
  # I have an old Zenith-19 terminal at home that still gets a lot of use.
  # This terminal suffers from the same famous insert-mode padding lossage
  # that has been acknowledged for the Z29 terminal.  Emacs is nearly
  # unusable on this box, since even a half-scroll up or down the window
  # causes flaming terminal death.
  #
  # On the Z19, the only way I have found around this problem is to remove
  # the :al: and :dl: entries entirely.  No amount of extra padding will
  # help (I have tried up to 20000).  Removing <il1=\EL$> and <dl1=\EM$>
  # makes Emacs a little slower, but it remains in the land of the living.
  # Big win.
  h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
          OTbs, am, eslok, hs, mir, msgr,
          cols#80, it#8, lines#24,
          acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{, bel=^G,
          clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4,
-Line 18563
+Line 18894
 Line 18563
 Line 18894
          kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red,
          lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
          smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
  h19-u|heathkit with underscore cursor,
          cnorm@, cvvis@, use=h19-b,
  h19-g|h19g|heathkit w/block cursor,
          cnorm=\Ex4, cvvis@, use=h19-b,
  alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
          lines#60,
          dl1=\EM, il1=\EL, use=h19,
  # The major problem with the Z29 is that it requires more padding than the Z19.
  #
-Line 18577
+Line 18908
 Line 18577
 Line 18908
  # it needs more padding. It especially loses if a program attempts
  # to put the Z29 into insert mode and insert text at 9600 baud. It
  # even loses worse if the program attempts to insert tabs at 9600
  # baud. Adding padding to text that is inserted loses because in
  # order to make the Z29 not die, one must add so much padding that
  # whenever the program tries to use insert mode, the effective
  # rate is about 110 baud.
  #
  # What program would want to put the terminal into insert mode
  # and shove stuff at it at 9600 baud you ask?
  #
  # Emacs. Emacs seems to want to do the mathematically optimal
  # thing in doing a redisplay rather than the practical thing.
  # When it is about to output a line on top of a line that is
  # already on the screen, instead of just killing to the end of
  # the line and outputting the new line, it compares the old line
  # and the new line and if there are any similarities, it
  # constructs the new line by deleting the text on the old line
  # on the terminal that is already there and then inserting new
  # text into the line to transform it into the new line that is
  # to be displayed. The Z29 does not react kindly to this.
  #
  # But don't cry for too long.... There is a solution. You can make
  # a termcap entry for the Z29 that says the Z29 has no insert mode.
  # Then Emacs cannot use it. "Oh, no, but now inserting into a
  # line will be really slow", you say. Well there is a sort of a
  # solution to that too. There is an insert character option on
  # the Z29 that will insert one character. Unfortunately, it
  # involves putting the terminal into ansi mode, inserting the
  # character, and changing it back to H19 mode. All this takes 12
  # characters. Pretty expensive to insert one character, but it
  # works. Either Emacs doesn't try to use its inserting hack when
  # it's only given an insert character ability or the Z29 doesn't
  # require padding with this (the former is probably more likely,
  # but I haven't checked it out).
  # (z29: added empty <acsc> to suppress a tic warning, merged in
  # status line capabilities from BRL entry --esr)
  z29|zenith29|z29b|zenith z29b,
          OTbs, OTpt, am, eslok, hs, mir, msgr,
          OTkn#10, cols#80, lines#24,
          OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
          cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
          cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
          ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
          ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
          is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
          kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
          lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
          rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
          tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
  # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
  # the world is stable. <rs1> causes the terminal to be reset to the state
  # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
-Line 18633
+Line 18964
 Line 18633
 Line 18964
  # From: Mike Meyers
  # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
  # looks vt100-compatible -- esr)
  z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
          OTbs, OTpt, am, eslok, hs, mir, msgr,
          OTkn#10, cols#80, it#8, lines#24,
          OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
          cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
          dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
          ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
          ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
          kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
          kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
          kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
          nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
          rmso=\E[m, rmul=\E[m,
          rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
          sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
          tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
  z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
          rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
          use=z29a,
  z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
          rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
          use=z29a,
  z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
          rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
          use=z29a,
  # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
  z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
          am, eslok, hs, mc5i, mir, msgr, xon,
          cols#80, lines#24,
          acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
          blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
          clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
          dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
          dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
          fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
          ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
          ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
          kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
          kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
          mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
          rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
          rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
          smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
          tsl=\E[s\E[>1h\E[25;%i%p1%dH,
  # From: Brad Brahms <Brahms@USC-ECLC>
  z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
          cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw,
  # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
  z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
          OTbs, OTpt, mir, msgr,
          OTkn#10, cols#80, it#8, lines#24,
          acsc=~\^x`qanbkcjdmelfgg+hai.kwsutvutvozs{,
          clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA,
-Line 18701
+Line 19032
 Line 18701
 Line 19032
          kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI,
          khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF,
          smir=\E@, smso=\Ep,
  p19|h19-b with il1/dl1,
          dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
  # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
  # (ztx: removed duplicate :sr: -- esr)
  ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
          OTbs, am, eslok, hs,
          cols#80, it#8, lines#24,
          clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
          dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
          il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
          kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
          kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
          ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
          tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
  #### IMS International (ims)
  #
  # There was a company called IMS International located in Carson City,
  # Nevada, that flourished from the mid-70s to mid-80s.  They made S-100
  # bus/Z80 hardware and a line of terminals called Ultimas.
  #
  # From: Erik Fair <fair@ucbarpa.berkeley.edu>  Sun Oct 27 07:21:05 1985
  ims950-b|bare ims950 no init string,
          is2@, use=ims950,
  # (ims950: removed obsolete ":ko@:" -- esr)
  ims950|ims televideo 950 emulation,
          xenl@,
          flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
          kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950,
  # (ims950-rv: removed obsolete ":ko@:" -- esr)
  ims950-rv|ims tvi950 rev video,
          xenl@,
          flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
          kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv,
  ims-ansi|ultima2|ultimaII|IMS Ultima II,
          OTbs, am,
          cols#80, it#8, lines#24,
          clear=\E[H\E[2J, cub1=^H, cud1=\ED,
          cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
          ht=^I, if=/usr/share/tabset/vt100,
          is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
          rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
          smul=\E[4m,
  #### Intertec Data Systems
  #
-Line 18755
+Line 19086
 Line 18755
 Line 19086
  # then sank out of sight.
  #
  superbrain|intertec superbrain,
          OTbs, am, bw,
          cols#80, lines#24,
          OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
          cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
          ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
          kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
  # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
  # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
  # and the reverse is actually true.  Try it. -- esr)
  intertube|intertec|Intertec InterTube,
          OTbs, am,
          cols#80, lines#25,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
          ind=^J, rmso=\E0@, smso=\E0P,
  # The intertube 2 has the "full duplex" problem like the tek 4025: if you
  # are typing and a command comes in, the keystrokes you type get interspersed
  # with the command and it messes up
  intertube2|intertec data systems intertube 2,
          OTbs,
          cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
          el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
          ll=^K^X\r, vpa=\013%p1%c, use=intertube,
  #### Ithaca Intersystems
  #
-Line 18793
+Line 19124
 Line 18793
 Line 19124
  #
  # The Graphos III was a color graphics terminal from Ithaca Intersystems.
  # These entries were written (originally in termcap syntax) by Brian Yandell
  # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
  # University of Wisconsin.
  # (graphos: removed obsolete and syntactically incorrect :kn=4:,
  # removed <if=/usr/share/tabset/init.graphos> and
  # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
  graphos|graphos III,
          am, mir,
          cols#80, it#8, lines#24,
          clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
          cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A,
          cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
          dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
          il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
          kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
          rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
          smir=\E[4h, smso=\E[7m,
  graphos-30|graphos III with 30 lines,
          lines#30,
          cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
  #### Modgraph
  #
-Line 18828
+Line 19159
 Line 18828
 Line 19159
  #       Vox: (617)-890-5796.
  #
  # However, if you call that number today you'll get an insurance company.
  # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
  # 26 Feb 1997 that says:
  #
  # Modgraph GX-1000, replaced by GX-2000.  Both are out of production, have been
-Line 18841
+Line 19172
 Line 18841
 Line 19172
  # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
  #
  modgraph|mod24|modgraph terminal emulating vt100,
          xenl@,
          cols#80, lines#24,
          cvvis=\E\^9;0s\E\^7;1s,
          is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
          rf@, ri=\EM\E[K$<5/>, use=vt100,
  # The GX-1000 manual is dated 1984.  This looks rather like a VT-52.
  modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
          am, da, db,
          cols#80, it#8, lines#24,
          clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
          ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
          is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
          ri=\EI$<5/>,
  #
  # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
  # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
-Line 18869
+Line 19200
 Line 18869
 Line 19200
  # with TERM=mod and screen set to 80x48 but it's not obvious.  Only
  # the first line disappears but a ctrl-l shows that it did work
  # correctly.
  modgraph48|mod|Modgraph w/48 lines,
          OTbs, OTpt, am, xenl,
          cols#80, it#8, lines#48, vt#3,
          OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
          cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
          flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
          home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
          kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
          kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
          ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
          smso=\E[7m, smul=\E[4m,
  #### Morrow Designs
  #
  # This was George Morrow's company.  They started in the late 1970s making
  # S100-bus machines.  They used to be reachable at:
  #
-Line 18895
+Line 19226
 Line 18895
 Line 19226
  # but they're long gone now (1995).
  #
  # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
  # Jeff's specimen was dated June 1984.
  # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
  mt70|mt-70|Morrow MD-70; native Morrow mode,
          am, mir, msgr, xon,
          cols#80, it#8, lines#24,
          acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
          cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
          cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
          cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
          flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
          ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
          kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
          kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
          kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
          kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
          kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
          kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
          rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E],
          smul=\EG1, tbc=\E0, use=adm+sgr,
  #### Motorola
  #
  # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
  # (Seth H Zirin)
  ex155|Motorola Exorterm 155,
          OTbs, am, bw,
          OTkn#5, OTug#1, cols#80, lines#24,
          cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
          cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
          home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
          kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
          rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
  #### Omron
  #
  # This company is still around in 1995, manufacturing point-of-sale systems.
  omron|Omron 8025AG,
          OTbs, am, da, db,
          cols#80, lines#24,
          bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
          cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
          il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
  #### Ramtek
  #
-Line 18958
+Line 19289
 Line 18958
 Line 19289
  # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
  # Note that the Control-E key is useless on this brain-damaged terminal.  No
  # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
  rt6221|Ramtek 6221 80x24,
          OTbs, OTpt, msgr, xon,
          OTkn#4, cols#80, it#8, lines#24, vt#3,
          acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
          clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
          csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
          cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
          hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
          kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
          nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
          rmso=\E[m, rmul=\E[m,
          rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
          sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g,
  # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
  rt6221-w|Ramtek 6221 160x48,
          cols#160, lines#48,
          ll=\E[48;1H, use=rt6221,
  #### RCA
  #
  # RCA VP3301 or VP3501
  rca|rca vp3301/vp3501,
          OTbs,
          cols#40, lines#24,
          clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
  #### Selanar
-Line 19006
+Line 19337
 Line 19006
 Line 19337
  # communication requirements.  No delays are specified; use "stty ixon -ixany"
  # to enable DC3/DC1 flow control!
  # I commented out the scrolling capabilities since they are too slow.
  hirez100|Selanar HiREZ-100,
          OTbs, OTpt, mir, msgr, xon,
          OTkn#4, cols#80, it#8, lines#48, vt#3,
          acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
          cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
          hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
          kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
          lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
          mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
          rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
          rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
          sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g,
  hirez100-w|Selanar HiREZ-100 in 132-column mode,
          cols#132, use=hirez100,
  #### Signetics
  #
  # From University of Wisconsin
  vsc|Signetics Vsc Video driver by RMC,
          am, msgr,
          cols#80, it#8, lines#26,
          clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
          ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
          rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
  #### Soroc
  #
-Line 19047
+Line 19378
 Line 19047
 Line 19378
  # consisted of a circle with a slightly smaller 15 degree (approx.)
  # wedge with rounded corners inside it.   The color was sort of
  # a metallic gold/yellow.
  #
  # If I had been more of a beer drinker it might have been obvious
  # to me, but it took a clue from their service department to make
  # me exclaim, "Of course!"   The circular object was the top of
  # a beer can (the old removable pop-top style) and "Soroc" was an
  # anagram for "Coors".
  #
  # I can just imagine the founders of the company sitting around
  # one evening, tossing back a few and trying to decide what to
  # call their new company and what to use for a logo.
  #
  # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
  soroc120|iq120|soroc|soroc iq120,
          clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
          kcuf1=^L, kcuu1=^K, use=adm3a,
  soroc140|iq140|soroc iq140,
          OTbs, am, mir,
          cols#80, lines#24,
          bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
          dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
          kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
          kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
          kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
          rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
  #### Southwest Technical Products
  #
  # These guys made an early personal micro called the M6800.
  # The ct82 was probably its console terminal.
  #
  # (swtp: removed obsolete ":bc=^D:" -- esr)
  swtp|ct82|southwest technical products ct82,
          am,
          cols#82, lines#20,
          bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
          cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
          home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
          is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
          ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
  #### Synertek
  #
-Line 19116
+Line 19447
 Line 19116
 Line 19447
  # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
  # control and escape sequences are very different. The KTM-3 was always
  # real broken, at least according to the folks I've talked to about it.
  #
  # The padding in the entry is probably off--these terminals were very
  # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
  # anyone with any sanity replaced the ROMs with something that provided
-Line 19124
+Line 19455
 Line 19124
 Line 19455
  # obviously very primitive... oh, you could get an upgraded ROM from
  # Synertek for some incredible amount of money, but what hacker with an
  # EPROM burner would do that? :)
  #
  # Sorry I don't have any contact info; I believe they were located in
  # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
  # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
-Line 19132
+Line 19463
 Line 19132
 Line 19463
  #
  # Tested, seems to work fine with vi.
  synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
          am,
          cols#80, lines#24,
          clear=^Z, cub1=^H, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
  #### Tab Office Products
  #
-Line 19153
+Line 19484
 Line 19153
 Line 19484
  # Seems to be no way to get rid of status line.
  # The manual for this puppy was dated June 1981.  It claims to be VT52-
  # compatible but looks more vt100-like.
  tab132|tab|tab132-15|tab 132/15,
          da, db,
          OTdN@, cols#80, lines#24, lm#96,
          cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
          il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
          kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,
  tab132-w|tab132 in wide mode,
          cols#132,
          is2=\E[?7h\E[?3h\E[?5l, use=tab132,
  tab132-rv|tab132 in reverse-video mode,
          is2=\E[?7h\E[?3l\E[?5h, use=tab132,
  tab132-w-rv|tab132 in reverse-video/wide mode,
          is2=\E[?7h\E[?3h\E[?5h, use=tab132-w,
  #### Teleray
-Line 19186
+Line 19517
 Line 19186
 Line 19517
  # on the bottom and no obvious model number is probably a 3700.
  #
  t3700|dumb teleray 3700,
          OTbs,
          cols#80, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
  t3800|teleray 3800 series,
          OTbs,
          cols#80, it#8, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
          home=\EH, ht=^I, ind=^J, ll=\EY7\s,
  t1061|teleray|teleray 1061,
          OTbs, am, km, xhp, xt,
          cols#80, it#8, lines#24, xmc#1,
          bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
          dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
          ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
          is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
          kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
          kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
          tbc=\EG,
  t1061f|teleray 1061 with fast PROMs,
          dl1=\EM, il1=\EL, ip@, use=t1061,
  # "Teleray Arpa Special", officially designated as
  # "Teleray Arpa network model 10" with "Special feature 720".
  # This is the new (1981) fast microcode updating the older "arpa" proms
-Line 19219
+Line 19550
 Line 19219
 Line 19550
  # Note: this is NOT the old termcap's "t1061f with fast proms."
  # From: J. Lepreau <lepreau@utah-cs> Tue Feb  1 06:39:37 1983, Univ of Utah
  # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
  t10|teleray 10 special,
          OTbs, km, xhp, xt,
          cols#80, it#8, lines#24, xmc#2,
          clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
          dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
          ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
          smul=\ERH,
  # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
  # back/forth words. Put the function keys (f1-f10) where they can be
  # found, and turn off the other magic keys along the top row, except
  # for line/local. Do the magic appropriate to make the page shifts work.
  # Also toggle ^S/^Q for those of us who use Emacs.
  t16|teleray 16,
          am, da, db, mir, xhp, xt,
          cols#80, lines#24,
          bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
          cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
          dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
          ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
          kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
          rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
          rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
          smso=\E[7m, smul=\E[4m,
  #### Texas Instruments (ti)
  #
-Line 19250
+Line 19581
 Line 19250
 Line 19581
  # The Silent 700 was so called because it was built around a quiet thermal
  # printer.  It was portable, equipped with an acoustic coupler, and pretty
  # neat for its day.
  ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
          OTbs, hc, os,
          cols#80,
          bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
  #
  # Texas Instruments 916 VDT 7 bit control mode
  #
  ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
          da, db, in, msgr,
          cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
          cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
          cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
          dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM,
          ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K,
          enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
          hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
          il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
          kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
          kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
          kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
          kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
          kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@,
          smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
          use=vt220,
  #
  # Texas Instruments 916 VDT 8 bit control mode
  #
  ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
          kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
          kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
          kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
          kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
          kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
          kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916,
  #
  # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
  #
  ti916-132|Texas Instruments 916 VDT vt220 132 column,
          cols#132, use=ti916,
  #
  # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
  #
  ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
          cols#132, use=ti916-8,
  ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
          OTbs, am, xon,
          cols#80, it#8, lines#24,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
          csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
          cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
          dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
          il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
          kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
          kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
          ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g,
  ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
          am, xon,
          cols#80, it#8, lines#24,
          bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
          clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
          csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
          cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
          dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
          il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
          kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
          kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
          kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
          rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
          smul=\E[4m, tbc=\E[3g,
  ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
          cols#132, use=ti924,
  ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
          cols#132, use=ti924-8,
  ti931|Texas Instruments 931 VDT,
          OTbs, am, xon,
          cols#80, lines#24,
          bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
          cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
          ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
          is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
          kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
          kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
          kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
          sgr0=\E4@, smso=\E4A, smul=\E4D,
  ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
          csr@, ind=\E[1S, ri=\E[1T, use=ti924,
  # (ti926-8: I corrected this from the broken SCO entry -- esr)
  ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
          csr@, ind=\2331S, ri=\2331T, use=ti924-8,
  ti_ansi|basic entry for ti928,
          am, bce, eo, xenl, xon,
          colors#8, cols#80, it#8, lines#25, pairs#64,
          bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
          cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
          cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
          dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
          il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
          kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
          kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
          op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
          setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
          smso=\E[7m, smul=\E[4m,
  #
  #       928 VDT 7 bit control mode
  #
  ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
          kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
          kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
          kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
          kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
          kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi,
  #
  #       928 VDT 8 bit control mode
  #
  ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
          kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
          kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
          kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
          kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
          kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
          kpp=\233T, kprt=\23335~, use=ti_ansi,
  #### Zentec (zen)
  #
  # (zen30: removed obsolete :ma=^L ^R^L^K^P:.  This entry originally
  # had just <smso>=\EG6 which I think means standout was supposed to be
  # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
  # <invis> might work-- esr)
  zen30|z30|zentec 30,
          OTbs, am, mir, ul,
          cols#80, lines#24,
          bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
          dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
          il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
          smul@, use=adm+sgr,
  # (zen50: this had extension capabilities
  #       :BS=^U:CL=^V:CR=^B:
  # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
  # which were also in the original entry -- esr)
  # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
  zen50|z50|zentec zephyr,
          OTbs, am,
          cols#80, lines#24, xmc#1,
          clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
          cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
          invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
          rmul@, smul@, use=adm+sgr,
  # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
  cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
          OTbs, am, bw,
          cols#80, lines#24,
          blink=\EM", clear=\EH\EJ, cnorm=\EP,
          csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
          cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
          cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
          invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
          kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
          rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
          smso=\EM$, smul=\EM0,
  ######## OBSOLETE UNIX CONSOLES
  #
  #### Apollo consoles
  #
  # Apollo got bought by Hewlett-Packard.  The Apollo workstations are
  # labeled HP700s now.
  #
  # From: Gary Darland <goodmanc@garnet.berkeley.edu>
  apollo|apollo console,
          OTbs, am, mir,
          cols#88, lines#53,
          clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
          ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
          rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
          smso=\ES, smul=\EU, vpa=\EO+\s,
  # We don't know whether or not the apollo guys replicated DEC's firmware bug
  # in the VT132 that reversed <rmir>/<smir>.  To be on the safe side, disable
  # both these capabilities.
  apollo_15P|apollo 15 inch display,
          rmir@, smir@, use=vt132,
  apollo_19L|apollo 19 inch display,
          rmir@, smir@, use=vt132,
  apollo_color|apollo color display,
          rmir@, smir@, use=vt132,
  #### Convergent Technology
  #
-Line 19458
+Line 19789
 Line 19458
 Line 19789
  # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
  # (aws: removed unknown :dn=^K: -- esr)
  aws|Convergent Technologies AWS workstation under UTX and Xenix,
          am,
          OTug#0, cols#80, lines#28, xmc#0,
          OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
          clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
          dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
          ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
          kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
          rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
          vpa=\EV%p1%c,
  awsc|Convergent Technologies AWS workstation under CTOS,
          am,
          OTug#0, cols#80, lines#24, xmc#0,
          OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
          cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
          el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
          rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
          smul=\EAC,
  #### DEC consoles
  #
-Line 19488
+Line 19819
 Line 19488
 Line 19819
  # during bootup, it was in text mode, and probably had a terminal emulator
  # within it.  And that is what your termcap entry is for.  In graphics
  # mode the screen size is 1024x864 pixels.
  qdss|qdcons|qdss glass tty,
          OTbs, am,
          cols#128, lines#57,
          clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
          cup=\E=%p1%c%p2%c, cuu1=^K,
  #### Fortune Systems consoles
  #
-Line 19513
+Line 19844
 Line 19513
 Line 19844
  # to force both magic cookie glitches off.  Once upon a time, I
  # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
  # function keys; thus the "Al" value for HM was certainly an error.  I renamed
  # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
  # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
  # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
  # names below.  I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
  fos|fortune|Fortune system,
          OTbs, am, bw,
          cols#80, lines#25,
          acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
          clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
          cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
          cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
          ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
          ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
          kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
          kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
          kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
          khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
          rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
          smso=^\H`, smul=^\HP,
  #### Masscomp consoles
  #
-Line 19541
+Line 19872
 Line 19541
 Line 19872
  #
  # (masscomp: ":MT:" changed to ":km:";  -- esr)
  masscomp|masscomp workstation console,
          OTbs, km, mir,
          cols#80, it#8, lines#24,
          clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
          ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
          kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
          rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
  masscomp1|masscomp large screen version 1,
          cols#104, lines#36, use=masscomp,
  masscomp2|masscomp large screen version 2,
          cols#64, lines#21, use=masscomp,
  ######## OTHER OBSOLETE TYPES
  #
-Line 19564
+Line 19895
 Line 19564
 Line 19895
  #
  # CTRM terminal emulator
- # 1. underlining is not allowed with colors: first, it is simulated by
+ # 1. underlining is not allowed with colors: first, is is simulated by
  # black on white, second, it disables background color manipulations.
  # 2. BLINKING, REVERSE and BOLD are allowed with colors,
  # so we have to save their status in the static registers A, B and H
-Line 19572
+Line 19903
 Line 19572
 Line 19903
  # (because any color change turns off ALL attributes)
  # 3. <bold> and <rev> sequences alternate modes,
  # rather than simply  entering them.  Thus we have to check the
  # static register B and H to determine the status, before sending the
  # escape sequence.
  # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
  # and then reset colors
-Line 19590
+Line 19921
 Line 19590
 Line 19921
  #   3) turn on foreground attributes
  #   4) store information about foreground into U,V,W static registers
  # 8. turn on background: similar to turn on foreground above
  ctrm|C terminal emulator,
          am, bce, xon,
          colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
          pairs#63, pb#19200, vt#6,
          bel=^G, blink=\E&dA%{1}%PA,
          bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
          clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
          ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
          il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
          kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
          kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
          kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
          op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
          rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
          setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
          setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
          sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
          sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
          smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
  # gs6300 - can't use blue foreground, it clashes with underline;
  # it's simulated with cyan
  # Bug: The <op> capability probably resets attributes.
  # (gs6300: commented out <rmln> (no <smln>) --esr)
  gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
          am, bce, msgr, xon,
          colors#8, cols#80, it#8, lines#24, pairs#63,
          acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
          cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
          cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
          cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
          dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
          ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
          is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
          kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
          khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
          ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
          setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
          sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
  # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
  # MS-Kermit with Heath-19 emulation mode enabled
  # (h19k: changed ":pt@:" to ":it@"
  h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
          am@, da, db, xt,
          it@,
          ht@, use=h19-u,
  # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
  # Software (formerly Peripherals Computers & Supplies, Inc) of
  # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376.  They can
  # also be reached at support@synergy.com.
  versaterm|versaterm vt100 emulator for the macintosh,
          am, xenl,
          cols#80, it#8, lines#24,
          bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
          clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
          cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
          cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
          dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
          el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
          il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
          kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
          kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
          rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
          rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
          sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
          smul=\E[4m$<2/>,
  # From: Rick Thomas <ihnp4!btlunix!rbt>
  # (xtalk: I added <rmam>/<smam> based on the init string.
  xtalk|IBM PC with xtalk communication program (versions up to 3.4),
          am, mir, msgr, xon,
          cols#80, it#8, lines#24, vt#3, xmc#1,
          acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
          bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
          cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
          cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
          cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
          el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
          il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB,
          kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
          rmkx=\E[?1l\E>, rmso=\E[m\s,
          rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
          smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
          tbc=\E[3g, use=vt100+fnkeys,
  # The official PC terminal emulator program of the AT&T Product Centers.
  # Note - insert mode commented out - doesn't seem to work on AT&T PC.
  simterm|attpc running simterm,
          am,
          cols#80, lines#24,
          bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
          cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
          dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
          rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
  #### Daisy wheel printers
  #
-Line 19697
+Line 20028
 Line 19697
 Line 20028
  #
  # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
  diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
          hc, os,
          cols#132, it#8,
          cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
          ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
  diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
          cols#124,
          is2=\r        \E9, use=diablo1620,
  # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
  diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
          bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
          use=diablo1620,
  # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
  # file -- esr)
  diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
          cols#124,
          rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
  diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
          use=diablo1640-lm,
  # DTC 382 with VDU.  Has no <ed> so we fake it with <el>.  Standout
  # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
  # The terminal has tabs, but I'm getting tired of fighting the braindamage.
  # If no tab is set or the terminal's in a bad mood, it glitches the screen
  # around all of memory.  Note that return puts a blank ("a return character")
  # in the space the cursor was at, so we use ^P return (and thus ^P newline for
-Line 19729
+Line 20060
 Line 19729
 Line 20060
  # least one line with no tabs in it, and once you tab through that line,
  # it completely weirds out.
  # (dtc382: change <rmcup> to <smcup> -- it  just does a clear --esr)
  dtc382|DTC 382,
          am, da, db, xhp,
          cols#80, lines#24, lm#96,
          bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
          cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
          dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
          home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
          rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
  dtc300s|DTC 300s,
          hc, os,
          cols#132,
          bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
          hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
  gsi|mystery gsi terminal,
          hc, os,
          cols#132,
          bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
          ind=^J,
  aj830|aj832|aj|anderson jacobson,
          hc, os,
          bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
          ind=^J,
  # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
  aj510|Anderson-Jacobson model 510,
          am, mir,
          cols#80, lines#24,
          clear=^L, cub1=^H, cuf1=\EX,
          cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
          dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
          il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
          kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
          rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
          smul=\E"U,
  # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
  # This is incomplete, but it's a start.
  nec5520|nec|spinwriter|nec 5520,
          hc, os,
          cols#132, it#8,
          bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
          hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
          kbs=^H, tbc=\E3,
  qume5|qume|Qume Sprint 5,
          hc, os,
          cols#80, it#8,
          bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
          hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
  # I suspect the xerox 1720 is the same as the diablo 1620.
  xerox1720|x1720|x1750|xerox 1720,
          hc, os,
          cols#132, it#8,
          bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
          tbc=\E2,
  #### Miscellaneous obsolete terminals, manufacturers unknown
  #
  # If you have any information about these (like, a manufacturer's name,
  # and a date on the serial-number plate) please send it!
  cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
          OTbs, am,
          cols#73, lines#36,
          clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
  cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
          OTbs, am,
          cols#85, lines#39,
          clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
          kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
          kf4=\E8, rmso=\Em^C, smso=\Em^L,
  cops10|cops|cops-10|cops 10,
          am, bw,
          cols#80, lines#24,
          bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
          cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
          ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
          khome=^Y,
  # (d132: removed duplicate :ic=\E5:,
  # merged in capabilities from a BRL entry -- esr)
  d132|datagraphix|datagraphix 132a,
          da, db, in,
          cols#80, lines#30,
          bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
          cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
          dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
          kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
  # The d800 was an early portable terminal from c.1984-85 that looked a lot
  # like the original Compaq `lunchbox' portable (but no handle).  It had a vt220
  # mode (which is what this entry looks like) and several other lesser-known
  # emulations.
  d800|Direct 800/A,
          OTbs, am, da, db, msgr, xhp,
          cols#80, it#8, lines#24,
          acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
          bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
          cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
          cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
          kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
          kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
          ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
          smacs=\E[1m, smso=\E[7m, smul=\E[4m,
  digilog|digilog 333,
          OTbs,
          cols#80, lines#16,
          bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
          home=^N, ind=^J,
  # The DWK was a terminal manufactured in the Soviet Union c.1986
  dwk|dwk-vt|dwk terminal,
          am,
          cols#80, it#8, lines#24,
          acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
          bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
          ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
          kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
          kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
          kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
          kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
          sgr0=\EX, smacs=\EF, smso=\ET,
  env230|envision230|envision 230 graphics terminal,
          xenl@,
          mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
          sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>,
          use=vt100,
  # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
  # coupler attached, the whole rig fitting in a suitcase and more or less
  # portable.  Hot stuff for c.1977 :-) -- esr
  ep48|ep4080|execuport 4080,
          OTbs, am, os,
          cols#80,
          bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
  ep40|ep4000|execuport 4000,
          cols#136, use=ep4080,
  # Adam Thompson <athompso@pangea.ca> tells us:
  # Informer series - these are all portable units, resembling older
  # automatic bread-baking machines.  The terminal looks like a `clamshell'
-Line 19872
+Line 20203
 Line 19872
 Line 20203
  # The 305 was a color version of the 304; the 306 and 307 were mono and
  # color terminals built for IBM bisync protocols.
  # From: Paul Leondis <unllab@amber.berkeley.edu>
  ifmr|Informer D304,
          OTbs, am,
          cols#80, lines#24,
          clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
          cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
          ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
          smso=\EJ,
  # Entry largely based on wy60 and has the features of wy60ak.
  opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
          am, bw, hs, km, mir, msgr, ul, xon,
          cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
          acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
          cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
          cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
          dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
          ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
          hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
          ip=$<3>,
          is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
          kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
          kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
          kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
          kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
          kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
          kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
          mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
          pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
          pfx=\EZ1%p1%{63}%+%c%p2%s\177,
          pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
          rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
          rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
          rs3=\EwG\Ee($<150>,
          sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
          sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
          smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
          smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
          uc=\EG8\EG0, use=adm+sgr,
  teletec|Teletec Datascreen,
          OTbs, am,
          cols#80, lines#24,
          bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
          home=^^, ind=^J,
  # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
  # This description is for the LANPAR Technologies VISION 3220
  # terminal from 1984/85.  The function key definitions k0-k5 represent the
-Line 19923
+Line 20254
 Line 19923
 Line 20254
  #
  # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
  # I had a couple of scopes (3221) like this once where I used to work, around
  # the 1987 time frame if memory serves me correctly.  These scopes were made
  # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
  # compatible.  The 3220 was a plain text terminal like the VT-220, the 3221
  # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
-Line 19941
+Line 20272
 Line 19941
 Line 20272
  #
  # (v3220: removed obsolete ":kn#10:",
  # I added <rmam>/<smam> based on the init string -- esr)
  v3220|LANPAR Vision II model 3220/3221/3222,
          OTbs, am, mir, xenl,
          cols#80, it#8, lines#24,
          clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
          cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
          ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
          is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
          kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
          kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
          kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
          rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
          smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
  ######## ICH/ICH1 VERSUS RMIR/SMIR
  #
  # Some non-curses applications get confused if both ich/ich1 and rmir/smir
-Line 19981
+Line 20312
 Line 19981
 Line 20312
  # receive the document in due course.  Don't expect an email acknowledgement.
  #
  # Related standards include "X3.4-1977: American National Standard Code for
  # Information Interchange" (the ASCII standard) and "X3.41.1974:
  # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
  # American National Standard for Information Interchange."  I believe (but
  # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
  # respectively.
  #
  #### VT100/ANSI/ECMA-48
  #
  # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
  # and ECMA-48 Control Functions for Coded Character Sets.
  #
  # Much of the content of this comment is adapted from a table prepared by
  # Richard Shuford, based on a 1984 Byte article.  Terminfo correspondences,
  # discussion of some terminfo-related issues, and updates to capture ECMA-48
-Line 20163
+Line 20494
 Line 20163
 Line 20494
  # VPR  Vert. Position Relative   \E [ Pn e           1         FE     -   (R)
  # VT   Vertical Tabulation *     ^K                  -         FE     -
  # VTS  Vertical Tabulation Set   \E J                -         FE     -
  #
  # ---------------------------------------------------------------------------
  #
  # Notes:
  #
  # Some control characters are listed in the ECMA-48 standard without
  # being assigned functions relevant to terminal control there (they
  # referred to other standards such as ISO 1745 or ECMA-35).  They are listed
  # here anyway for completeness.
  #
-Line 20187
+Line 20518
 Line 20187
 Line 20518
  #
  # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
  #
  # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
  # abbreviation.
  #
  # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
  # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
  # 5 = clear all char tabs, 6 = clear all line tabs.
  #
  # (G) CUP and HVP are identical in effect.  Some ANSI.SYS versions accept
-Line 20207
+Line 20538
 Line 20207
 Line 20538
  #
  # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
  # 1 = clear from beginning, 2 = clear.
  #
  # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
  #
  # (L) The GSM parameters are vertical and horizontal parameters to scale by.
-Line 20244
+Line 20575
 Line 20244
 Line 20575
  #
  # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
  # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
  # from secondary aux device, 4 = stop relay to primary aux device, 5 =
  # start relay to primary aux device, 6 = stop relay to secondary aux device,
  # 7 = start relay to secondary aux device.
  #
-Line 20257
+Line 20588
 Line 20257
 Line 20588
  # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
  #
  # (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),
  # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
  # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
  # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
  # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
  # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
  # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
  # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
  # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
  # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
-Line 20279
+Line 20610
 Line 20279
 Line 20610
  # abbreviation.
  #
  # ---------------------------------------------------------------------------
  #
  # Abbreviations:
  #
  # Intro  an Introducer of some kind of defined sequence; the normal 7-bit
  #        X3.64 Control Sequence Introducer is the two characters "Escape ["
  #
  # Delim  a Delimiter
  #
  # x/y    identifies a character by position in the ASCII table (column/row)
  #
  # eF     editor function (see explanation)
  #
  # FE     format effector (see explanation)
  #
  # F      is a Final character in
  #             an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
  #             a control sequence (F from 4/0 to 7/14)
  #
  # Gs     is a graphic character appearing in strings (Gs ranges from
  #        2/0 to 7/14) in the ASCII table
  #
  # Ce     is a control represented as a single bit combination in the C1 set
  #        of controls in an 8-bit character set
  #
  # C0     the familiar set of 7-bit ASCII control characters
  #
  # C1     roughly, the set of control chars available only in 8-bit systems.
  #        This is too complicated to explain fully here, so read Jim Fleming's
  #        article in the February 1983 BYTE, especially pages 214 through 224.
  #
  # Fe     is a Final character of a 2-character Escape sequence that has an
  #        equivalent representation in an 8-bit environment as a Ce-type
  #        (Fe ranges from 4/0 to 5/15)
  #
  # Fs     is a Final character of a 2-character Escape sequence that is
  #        standardized internationally with identical representation in 7-bit
  #        and 8-bit environments and is independent of the currently
  #        designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
  #
  # I      is an Intermediate character from 2/0 to 2/15 (inclusive) in the
  #        ASCII table
  #
  # P      is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
  #        table
  #
  # Pn     is a numeric parameter in a control sequence, a string of zero or
  #        more characters ranging from 3/0 to 3/9 in the ASCII table
  #
  # Ps     is a variable number of selective parameters in a control sequence
  #        with each selective parameter separated from the other by the code
  #        3/11 (which usually represents a semicolon); Ps ranges from
  #        3/0 to 3/9 and includes 3/11
  #
  # *      Not relevant to terminal control, listed for completeness only.
  #
  # Format Effectors versus Editor Functions
  #
  # A format effector specifies how following output is to be displayed.
  # An editor function allows you to modify the display.  Informally
  # format effectors may be destructive; format effectors should not be.
  #
  # For instance, a format effector that moves the "active position" (the
  # cursor or equivalent) one space to the left would be useful when you want to
  # create an overstrike, a compound character made of two standard characters
  # overlaid. Control-H, the Backspace character, is actually supposed to be a
-Line 20354
+Line 20685
 Line 20354
 Line 20685
  # return, linefeed, formfeed, etc., are defined as format effectors.
  #
  # NOTES ON THE DEC VT100 IMPLEMENTATION
  #
  # Control sequences implemented in the VT100 are as follows:
  #
  #      CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
  #      LNM, NEL, RI, RIS, RM, SGR, SM, TBC
  #
  # plus several private DEC commands.
  #
  # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
  #
  #      Erase from cursor to end of line           Esc [ 0 K    or Esc [ K
  #      Erase from beginning of line to cursor     Esc [ 1 K
  #      Erase line containing cursor               Esc [ 2 K
-Line 20373
+Line 20704
 Line 20373
 Line 20704
  #
  # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
  # Esc [ 2 J, but this is wrong; the default is 0.
  #
  # The VT100 responds to receiving the DA (Device Attributes) control
  #
  #      Esc [ c    (or Esc [ 0 c)
  #
  # by transmitting the sequence
  #
  #      Esc [ ? l ; Ps c
  #
  # where Ps is a character that describes installed options.
  #
  # The VT100's cursor location can be read with the DSR (Device Status
  # Report) control
  #
  #      Esc [ 6 n
  #
  # The VT100 reports by transmitting the CPR sequence
  #
  #      Esc [ Pl ; Pc R
  #
  # where Pl is the line number and Pc is the column number (in decimal).
  #
  # The specification for the DEC VT100 is document EK-VT100-UG-003.
  #### ANSI.SYS
  #
  # Here is a description of the color and attribute controls supported in the
  # the ANSI.SYS driver under MS-DOS.  Most console drivers and ANSI
  # terminal emulators for Intel boxes obey these.  They are a proper subset
-Line 20435
+Line 20766
 Line 20435
 Line 20766
  #### Intel Binary Compatibility Standard
  #
  # For comparison, here are the capabilities implied by the Intel Binary
  # Compatibility Standard for UNIX systems (Intel order number 468366-001).
  # These recommendations are optional.  IBCS2 allows the leading escape to
  # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
-Line 20498
+Line 20829
 Line 20498
 Line 20829
  #       CSI c           (clear) clear screen
  #
  # The lack of any specification for attributes in SGR (among other things)
  # makes this a wretchedly weak standard. The table above is literally
  # everything iBSC2 has to say about terminal escape sequences; there is
  # no further discussion of their meaning or how to set the parameters
  # in these sequences at all.
-Line 20557
+Line 20888
 Line 20557
 Line 20888
  #
  # Finally, XENIX also used the following forms-drawing capabilities:
  #
  #       single  double  type             ASCII approximation
  #       ------  ------  -------------    -------------------
  #       GV      Gv      vertical line             |
  #       GH      Gv      horizontal line       -   _
  #       G1      G5      top right corner       _   |
  #       G2      G6      top left corner       |
  #       G3      G7      bottom left corner         |_
  #       G4      G8      bottom right corner   _|
  #       GD      Gd      down-tick character        T
-Line 20611
+Line 20942
 Line 20611
 Line 20942
  # correspond to acsc chars, here is the mapping:
  #
  #       box1[0]  = ACS_ULCORNER
  #       box1[1]  = ACS_HLINE
  #       box1[2]  = ACS_URCORNER
  #       box1[3]  = ACS_VLINE
  #       box1[4]  = ACS_LRCORNER
-Line 20649
+Line 20980
 Line 20649
 Line 20980
  # project.
  #
  # This file contains all the capability information present in John Kunze's
  # last version of the termcap master file, except as noted in the change
  # comments at end of file.  Some information about very ancient obsolete
  # capabilities has been moved to comments.  Some all-numeric names of older
  # terminals have been retired.
-Line 20717
+Line 21048
 Line 20717
 Line 21048
  #       * Replaced the translated BBN Bitgraph entries with purpose-built
  #         ones from AT&T's SVr3.
  #       * Replaced the AT&T entries with AT&T's official terminfos.
  #       * Added teleray 16, vc415, cops10.
  #       * Merged in many individual capabilities from SCO terminfo files.
  # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
  #       * Typo fixes.
-Line 20741
+Line 21072
 Line 20741
 Line 21072
  # 9.4.7 (Tue Apr  4 11:27:11 EDT 1995)
  #       * Added apple (Videx card), adm1a, oadm31.
  #       * Fixed malformed ampex csr.
  #       * Fixed act4, cyb110; they had old-style prefix padding left in.
  #       * Changed mandatory to advisory padding in many entries.
  #       * Replaced HP entries up to hpsub with purpose-built ones.
  #       * Blank rmir/smir/rmdc/smdc capabilities removed.
-Line 20771
+Line 21102
 Line 20771
 Line 21102
  #       * Comment fixes from David MacKenzie.
  #       * Added the new BSDI pc3 entry.
  # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
  #       * A change in the tic -C logic now ensures that all entries in
  #         the termcap translation will fit in < 1024 bytes.
  #       * Added `bobcat' and `gator' HP consoles and the Nu machine entries
  #         from GNU termcap file.  This merges in all their local information.
-Line 20822
+Line 21153
 Line 20822
 Line 21153
  #       * Added csr capability to linux entry.
  #       * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
  #       * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
  #       * Some commented-out caps in long entries come back in, my code
  #         for computing string-table lengths had a bug in it.
  #       * pcansi series modified to fit comm-program reality better.
  # 9.8.2 (Sat Sep  9 23:35:00 EDT 1995):
-Line 20859
+Line 21190
 Line 20859
 Line 21190
  #       * fixed cup in adm22 entry and parametrized strings in vt320-k3.
  #       * added it#8 to entries that used to have :pt: -- tvi912, vi200,
  #         ampex80,
  #       * Translate all home=\E[;H capabilities to home=\E[H, they're
  #         equivalent.
  #       * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
  #         vt100 and ANSI-like terminals.
-Line 20868
+Line 21199
 Line 20868
 Line 21199
  #         does this now, too.
  #       * fviewpoint is gone, it duplicated screwpoint.
  #       * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
  #         ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
  #         versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
  #         The UW vi50 replaces the old one, which becomes vi50adm,
  #       * No more embedded commas in name fields.
-Line 20893
+Line 21224
 Line 20893
 Line 21224
  #       * Hand-translate more XENIX capabilities.
  #       * Added hpterm entry for HP's X terminal emulator.
  #       * Added aixterm entries.
  #       * Shortened four names so everything fits in 14 chars.
  #
  # 9.11.0 (Thu Nov  2 17:29:35 EST 1995):
  #       * Added ibcs2 entry and info on iBCS2 standard.
-Line 20917
+Line 21248
 Line 20917
 Line 21248
  #       * Exiled some utterly unidentifiable custom and homebrew types to the
  #         UFO file; also, obsolete small-screen hardware; also, entries which
  #         look flat-out incorrect, garbled, or redundant.  These include the
  #         following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
  #         tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
  #         apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
  #         fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
  #         yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
  #         vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
  #         trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
  #         att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
  #         tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
  #         c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
  #         regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
  #         vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
  #         vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
  #       * Corrected pcvt25h as suggested by Brian C. Grayson
  #         <bgrayson@pine.ece.utexas.edu>.
  # 9.11.3 (Thu Nov  9 12:14:40 EST 1995):
  #       * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
  #       * Added kent=\EOM to xterm entry.
  #
  # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
-Line 20953
+Line 21284
 Line 20953
 Line 21284
  #       * Improved iris-ansi and sun entries.
  #       * More flash string improvements.
  #       * Corrected wy160 & wy160 as suggested by Robert Dunn
  #       * Added dim to at386.
  #       * Reconciled pc3 and ibmpc3 with the BSDI termcap file.  Keith says
  #         he's ready to start using the termcap generated from this one.
  #       * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
  #         ln03, lno3-w, h19-g, z29a*, qdss.  Made vt200 an alias of vt220.
  #       * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
  #         att610, att620, att630,
  #       * Changed hazeltine name prefix from h to hz.
  #       * Sent t500 to the UFI file.
  #       * I think we've sucked all the juice out of BSDI's termcap file now.
-Line 21024
+Line 21355
 Line 21024
 Line 21355
  #       * Sun console entry correction from J.T. Conklin.
  #       * Changed all DEC VT300 and up terminals to use VT300 tab set
  # 9.13.7 (Mon Jul  8 20:14:32 EDT 1996):
  #       * Added smul to linux entry (we never noticed it was missing
  #         because of sgr!).
  #       * Added rmln to hp+labels (deduced from other HP entries).
  #       * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
-Line 21037
+Line 21368
 Line 21037
 Line 21368
  #         adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
  #         qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
  #         wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
  #         adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
  #         f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
  #         owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
  #         lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
-Line 21054
+Line 21385
 Line 21054
 Line 21385
  #       * Aha! The BRL terminals file told us what the Iris extensions mean.
  #       * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
  #         commodore, cdc721-esc, excel62, osexec.  Replaced from the BRL file:
  #         cit500, adm11.
  # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
  #       * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
  #         aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
-Line 21081
+Line 21412
 Line 21081
 Line 21412
  #       * corrected pairs#8 typo in dtterm entry.
  #       * added tvi9065.
  # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
  #       * updated xterm entry to cover 3.1.2E's new features.
  # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
  #       * Added new minix entry
  #       * Removed aliases of the form ^[0-9]* for obsolete terminals.
-Line 21904
+Line 22235
 Line 21904
 Line 22235
  #       * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler)
  #       * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler)
  #       * add ccc and initc capabilities to xterm-16color -TD
+ #
+ # 2009-10-31
+ #       * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201)
+ #
+ # 2009-12-12
+ #       * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta)
+ #
+ # 2009-12-12
+ #       * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)
+ #       * rename minix to minix-1.7, add minix entry for Minux3 -TD
+ #
+ # 2009-12-26
+ #       * add bterm (bogl 0.1.18) -TD
+ #       * minor fix to rxvt+pcfkeys -TD
+ #
+ # 2010-02-06
+ #       * update mrxvt to 0.5.4, add mrxvt-256color -TD
+ #
+ # 2010-02-13
+ #       * add several screen-bce.XXX entries -TD
+ #
+ # 2010-02-23
+ #       * modify screen-bce.XXX entries to exclude ech, since screen's color
+ #         model does not clear with color for that feature -TD
+ #
+ # 2010-03-20
+ #       * rename atari and st52 to atari-old, st52-old, use newer entries from
+ #         FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane).
+ #
+ # 2010-06-12
+ #       * add mlterm+256color entry -TD
+ #
+ # 2010-07-17
+ #       * add hard-reset for rs2 to wsvt25 to help ensure that reset ends
+ #         the alternate character set (patch by Nicholas Marriott)
  #
  # The following sets edit modes for GNU EMACS.
  # Local Variables: