src/share/termtypes/termtypes.master - diff

Return to termtypes.master CVS log

Up to [local] / src / share / termtypes

Diff for /src/share/termtypes/termtypes.master between version 1.60 and 1.61

version 1.60, 2017/02/07 15:14:28

version 1.61, 2017/04/19 15:20:55

Line 472

ecma+sgr|attribute capabilities for true ECMA-48 terminals,

rmso=\E[27m, rmul=\E[24m, use=klone+sgr8,

ecma+strikeout|ECMA-48 strikeout/crossed-out,

rmxx=\E[29m, smxx=\E[9m,

# For comparison, here are all the capabilities implied by the Intel

# Binary Compatibility Standard (level 2) that fit within terminfo.

# For more detail on this rather pathetic standard, see the comments

Line 890

Line 893

# nsterm*|Apple_Terminal - AppKit Terminal.app

# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and

# Terminal.app is a Terminal emulator bundled with NeXT's NeXTSTEP and

# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X

# Server and Mac OS X operating systems. There is also a

# "terminal.app" in GNUStep, but I believe it to be an unrelated

# "terminal.app" in GNUstep, but I believe it to be an unrelated

# codebase and I have not attempted to describe it here.

# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you

# For NeXTSTEP, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you

# are pretty much on your own. Use "nsterm-7-m" and hope for the best.

# You might also try "nsterm-7" and "nsterm-old" if you suspect your

# version supports color.

Line 949

Line 952

# The Mythology* of AppKit Terminal.app:

# In the days of NeXTSTep 0.x and 1.x there were two incompatible

# In the days of NeXTSTEP 0.x and 1.x there were two incompatible

# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a

# shareware replacement for Terminal called "Stuart" which NeXT bought

# and used as the basis for the Terminal.app in NeXTstep 2+,

# and used as the basis for the Terminal.app in NeXTSTEP 2+,

# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I

# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or

# capabilities for the early versions, but I believe that the

# TERM_PROGRAM_VERSION may have been reset at some point.

# The early versions were tailored to the NeXT character set. Sometime

# after the Apple aquisition the encoding was swiched to MacRoman

# after the Apple acquisition the encoding was switched to MacRoman

# (initally with serious altcharset bugs due to incomplete conversion

# (initially with serious altcharset bugs due to incomplete conversion

# of the old NeXT code,) and then later to UTF-8. Alos sometime during

# of the old NeXT code,) and then later to UTF-8. Also sometime during

# or just prior to the early days of Mac OS X, the Terminal grew ANSI

# 8-color support (initially buggy when combined with attributes, but

# that was later fixed.) More recently, around Mac OS X version 10.3

Line 991

Line 994

# "nsterm" to comply with the name length and case conventions and

# limitations of various software packages [notably Solaris terminfo

# and UNIX.] A single Apple_Terminal alias is retained for

# backwards-compatbility.

# backwards-compatibility.

# * Added function key support (F1-F4). These only work in Terminal.app

# version 51, hopefully the capabilities won't cause problems for people

Line 1832

Line 1835

initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T,

use=linux,

# FbTerm

# Another variant. There are two parts (src, src/lib) with the latter

# comprising the escape-sequence parsing. The copyright notice on that

# says it is based on GTerm by Timothy Miller.

# The original developer "dragchan" has left, but as of March 2017 there is

# (still dead) code from May 2015 here:

# https://github.com/izmntuk/fbterm

# The acsc string may be incorrect.

# Not used here, the program recognizes escapes for italic, underline and

# dim, rendering those as green, cyan and gray respectively.

fbterm|FbTerm for Linux with framebuffer,

colors#256, pairs#32767,

acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i

\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u

\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,

initc=\E[3;%p1%d;%p2%d;%p3%d;%p4%d}, rmacs=\E[10m,

setab=\E[2;%p1%d}, setaf=\E[1;%p1%d},

sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5

%t;2%;%?%p6%t;1%;%?%p9%t;11%;m,

sgr0=\E[0;10m, smacs=\E[11m, use=linux,

# 16-color linux console entry; this works with a 256-character

# console font but bright background colors turn into dim ones when

# you use a 512-character console font. This uses bold for bright

Line 2484

Line 2511

cols#132, lines#50, use=arm100,

# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine

# manufactured by Sharp for the Japenese market.

# manufactured by Sharp for the Japanese market.

# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996

x68k|x68k-ite|NetBSD/x68k ITE,

cols#96, lines#32,

Line 3047

Line 3074

# | | | | | | | |

# | | | 1-On | | | 1-50 Hz

# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits

# | | ANSI/VT52 0-VT52 | | Bits Per Char. 0-7 Bits

# | | 1-ANSI | | 1-8 Bits

# | Keyclick 0-Off | Parity 0-Off

# | 1-On | 1-On

Line 3066

Line 3093

# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)

vt100|vt100-am|dec vt100 (w/advanced video),

OTbs, am, mc5i, msgr, xenl, xon,

OTbs, mc5i, xenl, xon,

cols#80, it#8, lines#24, vt#3,

vt#3,

csr=\E[%i%p1%d;%p2%dr, kcub1=\EOD, kcud1=\EOB,

kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,

mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rmam=\E[?7l,

rmkx=\E[?1l\E>, rs2=\E<\E>\E[?3;4;5l\E[?7;8h\E[r,

sc=\E7,

sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5

%;m%?%p9%t\016%e\017%;$<2>,

smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m$<2>,

use=vt100+4bsd, use=vt100+fnkeys,

vt100+4bsd|dec vt100 from 4.0BSD,

am, msgr,

cols#80, it#8, lines#24,

acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,

bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,

clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,

clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,

cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,

cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,

cuf=\E[%p1%dC, cuf1=\E[C$<2>,

cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,

cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,

enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H,

kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1,

kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,

lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,

rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmso=\E[m$<2>,

rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,

rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,

rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,

rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,

sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5

%;m%?%p9%t\016%e\017%;$<2>,

sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,

sgr0=\E[m\017$<2>, smacs=^N, smso=\E[1;7m$<2>,

smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,

smul=\E[4m$<2>, tbc=\E[3g,

use=vt100+fnkeys,

vt100nam|vt100-nam|vt100 no automargins,

am@, xenl@,

rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt100-am,

Line 4153

Line 4188

npc,

indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM,

rin=\E[%p1%dT, use=ansi+enq, use=xterm+pcfkeys,

use=xterm+tmux, use=xterm-basic,

use=xterm+tmux, use=ecma+strikeout, use=xterm-basic,

# This fragment is for people who cannot agree on what the backspace key

# should send.

Line 4822

Line 4857

xterm-pcolor|xterm with color used for highlights and status line,

wsl#40,

bold=\E[1;43m, rev=\E[7;34m,

sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1

sgr=%?%p9%t\016%e\017%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1

%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m,

%t;7;31%;%?%p3%t;7;34%;m,

smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6,

# This describes the capabilities of color_xterm, an xterm variant from

Line 5011

Line 5046

# GNOME terminal may automatically use the contents of the "xterm" terminfo to

# supply key information which is not built into the program. With 2.22.3,

# this list is built into the program (which addresses the inadvertant use of

# this list is built into the program (which addresses the inadvertent use of

# random terminfo data, though using a set of values which does not correspond

# to any that xterm produces - still not solving the problem that GNOME

# terminal hardcodes the $TERM variable as "xterm").

Line 6536

Line 6571

# xterm cursor bits.

tmux|tmux terminal multiplexer,

ritm=\E[23m, rmso=\E[27m, sitm=\E[3m, smso=\E[7m,

use=xterm+edit, use=xterm+pcfkeys, use=xterm+sl,

use=ecma+strikeout, use=xterm+edit, use=xterm+pcfkeys,

use=xterm+tmux, use=screen,

use=xterm+sl, use=xterm+tmux, use=screen,

tmux-256color|tmux with 256 colors,

use=xterm+256setaf, use=tmux,

Line 7254

Line 7289

# kPRV [shifted prev key] not implemented

# khome [home key] really is \E[1~ NOT \E[H

# tbc [clear tab stops] not implemented

# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni

# xenl [newline ignored after 80 cols] messes up last line? Ehud Karni

# smpch [Start PC charset] is \E[11m, same as smacs

# rmpch [End PC charset] is \E[10m, same as rmacs

# mir [move in insert mode] fails in tack?

Line 7596

Line 7631

# From: Federico Bianchi

# This is the entry for the OpenNT terminal.

# The ntconsole name is for backward compatability.

# The ntconsole name is for backward compatibility.

# This is for OpenNT 2.0 and later.

# Later OpenNT was renamed to Interix.

Line 8258

Line 8293

# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",

# moved <rmir> here from hpsub -- esr)

hpex|hp extended capabilites,

hpex|hp extended capabilities,

cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,

kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,

smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub,

Line 8661

Line 8696

# on off off Busy active on J5-19, CD disabled - Factory Set.

# on off on Busy active on J5-19, CD enabled

# sw4 Used in conjuction with S4 for comm interface control - Fact 0

# sw4 Used in conjunction with S4 for comm interface control - Fact 0

# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0

Line 8763

Line 8798

OTbs, OTpt,

OTkn#4,

if=/usr/share/tabset/vt100,

is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100,

is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100+4bsd,

# (adm42: removed obsolete ":ma=^K^P:" -- esr)

adm42|lsi adm42,

OTbs, am,

Line 9136

Line 9171

# (including some with magic cookies), fancy half-duplex mode, and

# different bugs.

# Some operations reqire truly incredible amounts of padding. The

# Some operations require truly incredible amounts of padding. The

# insert_line (<il1>) and delete_line (<dl1>) operations in particular

# are so slow as to be nearly unusable.

Line 10182

Line 10217

ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,

rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,

sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,

use=vt100,

use=vt100+4bsd,

#### Wyse (wy)

Line 10927

Line 10962

# terminfo. At one point, I found some reference indicating that this

# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just

# me), but I can't find that and the server under my bookmark to "Wyse

# Technical" isn't responding. So there's the question of wether the wy85

# Technical" isn't responding. So there's the question of whether the wy85

# terminfo should reflect the manufactuer's intended behaviour of the terminal

# terminfo should reflect the manufacturer's intended behaviour of the terminal

# or the actual."

wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,

am, hs, mc5i, mir, msgr, xenl, xon,

Line 11650

Line 11685

# These entries attempt to describe Avatar, a terminal emulation used with

# MS-DOS bulletin-board systems. It was designed to give ANSI-like

# capabilities, but with cheaper (shorter) control sequences. Messy design,

# excessively dependent on PC idiosyncracies, but apparently rather popular

# excessively dependent on PC idiosyncrasies, but apparently rather popular

# in the BBS world.

# No color support. Avatar doesn't fit either of the Tektronix or HP color

Line 11692

Line 11727

# ^V^Q%c -- query the driver

# ^V^R -- driver reset

# ^V^S -- Sound tone (PC-specific)

# ^V^T -- change highlight at current cursor poition to %c

# ^V^T -- change highlight at current cursor position to %c

# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>

# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c

# -- define window

Line 13179

Line 13214

# Briefly, the settings are for the following modes:

# (values are for bit set/clear with * indicating our preference

# and the value used to test these termcaps)

# Note that many of these settings are irrelevent to the terminfo

# Note that many of these settings are irrelevant to the terminfo

# and are just set to the default mode of the terminal as shipped

# by the factory.

Line 13608

Line 13643

# Cursor forward FF

# Cursor home RS

# Cursor up VT

# Cursor supress ETB

# Cursor suppress ETB

# Cursor enable CAN

# Erase to end of line ESC,T

# Erase to end of page ESC,Y

Line 13748

Line 13783

# tset or setterm etc.) provided that the terminal has been manually set

# up (and the setup saved with ^S) to be compatible with this termcap. To be

# compatible it should be in ANSI mode (not VT52). A set-up that

# works is to set all the manually setable stuff to factory defaults

# works is to set all the manually settable stuff to factory defaults

# by pressing ^D in set-up mode. Then increse the brighness with the

# by pressing ^D in set-up mode. Then increase the brightness with the

# up-arrow key since the factory default will likely be dim on an old

# terminal. Then change any options you want (provided that they are

# compatible with the termcap). For my terminal I set: Screen

Line 13871

Line 13906

clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,

cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,

kcuu1=^W, khome=^Y,

cdc721ll|CDC Vikingll,

cdc721ll|CDC Viking with long lines,

OTbs, am,

cols#132, lines#24,

clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,

Line 14255

Line 14290

# there is no way of knowing what it is that the program wants turned

# off.

# smul: The "underline" attribute is reconfigurable to an overline or

# strikethru, or (as done with \E[;3+} in is2=), to a line at the true

# strike-through, or (as done with \E[;3+} in is2=), to a line at the true

# bottom of the character cell. This was done to allow for more readable

# underlined characters, and to be able to distinguish between an

# underlined space, an underscore, and an underlined underscore.

Line 14359

Line 14394

# It's not made clear in the manuals, but based on other ansi/vt type

# terminals, it's a good guess that this terminal is capable of both

# "transparent print" (which doesn't copy data to the screen, and

# therefore needs mc5i: specified to say so) and "auxilliary print"

# therefore needs mc5i: specified to say so) and "auxiliary print"

# (which does duplicate printed data on the screen, in which case mc4=

# and mc5= should use the \E[?4i and \E[?5i strings instead).

Line 15350

Line 15385

# 2 Margin Bell 0=off 1=on

# Keyclick 0=off 1=on

# Ansi/VT52 0=VT52 1=Ansi

# ANSI/VT52 0=VT52 1=ANSI

# Xon/Xoff 0=Off 1=On

# 3 Shift3 0=Hash 1=UK Pound

Line 15378

Line 15413

cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,

home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,

rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,

use=vt100,

use=vt100+4bsd,

# except in 132 column mode, where it needs a little padding.

# This is still less padding than the vt100, and you can always turn on

# the ^S/^Q handshaking, so you can use vt100 flavors for things like

Line 16365

Line 16400

#ctrl-A set SOM position at cursor position

#ctrl-G Bell

#ctrl-H Backspace

#ctrl-I Horiz tab

#ctrl-I Horizontal tab

#ctrl-J Linefeed

#ctrl-K Cursor up

#ctrl-L Cursor right

Line 17272

Line 17307

colors#8, pairs#64,

op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,

use=ncr260vt300pp,

# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a

# The Intecolor emulation of the NCR 2900/260C color terminal is basically a

# DEC vt200/300 with color capabilities added.

ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,

colors#8, pairs#64,

Line 17513

Line 17548

# 'setf' definition. The escape sequence to set color attributes is

# ESC d y <foreground_color> <background_color> 1

# In addition, the background color can be changed through the desk accessories.

# The capablitiy 'op' sets colors to green on black (default combination).

# The capability 'op' sets colors to green on black (default combination).

# NOTE: The NCR Unix System Administrator's Shell will not function properly

# if the 'pairs' capability is defined. Un-Comment the 'pairs'

Line 18533

Line 18568

is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2

\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h

\E[?8h,

rc@, sc@, smkx=\E=, use=vt100,

rc@, sc@, smkx=\E=, use=vt100+4bsd,

# From: <jcoker@ucbic>

# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO

Line 18756

Line 18791

# Steve Jacobson 8/85

pcplot|pc-plot terminal emulation program,

xenl@,

csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,

csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100+4bsd,

# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>

# I've found that my KayPro II, running MDM730, continues to emulate an

# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX

Line 19022

Line 19057

OTdN#30,

blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,

# Lisaterm in 132 column ("wide") mode.

mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,

mac-w|macterminal-w|Apple Macintosh with MacTerminal in 132 column mode,

cols#132, use=mac,

#### Radio Shack/Tandy

Line 19746

Line 19781

# 1. Using double-shapes for vt100 graphical chars (eg: mc).

# 2. Native brown color corrected to good yellow color.

# 3. Adding "Insert" and "Delete Line" keys as ESC Up and ESC Down arrow keys.

# 4. Suppressed inexistant underlined mode (normally as bright).

# 4. Suppressed nonexistent underlined mode (normally as bright).

# 5. ich/ich1 not filled because of non-curses programs.

#--

# 6. Suppressed inexistant invisible mode.

# 6. Suppressed nonexistent invisible mode.

#(7.)Adding forgotten "cub/cud/cuf/cuu" sequences deplacement.

linux-m1b|Linux Minitel 1B "like" Monochrome (Gris/Blanc/Noir+Dim),

Line 19854

Line 19889

# From: Alexandre Montaron, 19 Nov 2015, updated 19 Sep 2016

# He comments:

# viewdata lacks a true cup capabilitie,

# viewdata lacks a true cup capability,

# so I achieved it with home and cud1/cuf1 sequences only !

viewdata|prestel/viewdata terminals,

am, bw, eslok, hz,

Line 20798

Line 20833

# Approximate date of release was 1982 (early 80s, anyway), and it had several

# evolutions including (limited) color versions such as the PS330C. PS300s

# were effectively obsolete by the late 80s, replaced by raster graphics

# systems, although specialized applications like molecular modelling

# systems, although specialized applications like molecular modeling

# hung onto them for a while longer. AFAIK all E&S vector graphics systems

# are out of production, though of course E&S is very much alive (in 1996).

# (ps300: changed ":pt@:" to "it@" -- esr)

Line 20806

Line 20841

ps300|Picture System 300,

xt,

it@,

rmso@, rmul@, smso@, smul@, use=vt100,

rmso@, rmul@, smso@, smul@, use=vt100+4bsd,

#### General Electric (ge)

Line 20966

Line 21001

# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore

# cursor, bc -> block cursor.

# From: Mike Meyers

# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>

# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> because <hts>

# looks vt100-compatible -- esr)

z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,

OTbs, OTpt, am, eslok, hs, mir, msgr,

Line 20988

Line 21023

\E[11m,

sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,

tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,

z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,

z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyclick and underscore cursor,

rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11

use=z29a,

Line 21187

Line 21222

is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11

;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s

\E\^11;81s\E\^11;89s,

rf@, ri=\EM\E[K$<5/>, use=vt100,

rf@, ri=\EM\E[K$<5/>, use=vt100+4bsd,

# The GX-1000 manual is dated 1984. This looks rather like a VT-52.

modgraph2|modgraph gx-1000 80x24 with keypad not enabled,

am, da, db,

Line 21288

Line 21323

#### Ramtek

# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they

# were competition for things like the Tektronics 4025.

# were competition for things like the Tektronix 4025.

# Ramtek 6221 from BRL, probably by Doug Gwyn

Line 21506

Line 21541

OTdN@, cols#80, lines#24, lm#96,

cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,

il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,

kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100,

kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,

use=vt100+4bsd,

tab132-w|tab132 in wide mode,

cols#132,

is2=\E[?7h\E[?3h\E[?5l, use=tab132,

Line 22239

Line 22275

# Software (formerly Peripherals Computers & Supplies, Inc) of

# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can

# also be reached at support@synergy.com.

versaterm|versaterm vt100 emulator for the macintosh,

versaterm|versaterm vt100 emulator for the Macintosh,

am, xenl,

cols#80, it#8, lines#24,

bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,

Line 22446

Line 22482

enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@,

sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;

1%;m$<2>,

sgr0=\E[0m$<2>, smacs@, use=vt100,

sgr0=\E[0m$<2>, smacs@, smso=\E[7m, use=vt100+4bsd,

# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic

# coupler attached, the whole rig fitting in a suitcase and more or less

# portable. Hot stuff for c.1977 :-) -- esr

Line 22579

Line 22615

# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch

# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for

# Coded Character Sets"), include your snail-mail address, and you should

# receive the document in due course. Don't expect an email acknowledgement.

# receive the document in due course. Don't expect an email acknowledgment.

# Related standards include "X3.4-1977: American National Standard Code for

# Information Interchange" (the ASCII standard) and "X3.41.1974:

Line 22604

Line 22640

# sequences. In the main table, \E stands for an escape (\033) character,

# SPC for space. Pn stands for a single numeric parameter to be inserted

# in decimal ASCII. Ps stands for a list of such parameters separated by

# semicolons. Parameter meanings for most parametrized sequences are

# semicolons. Parameter meanings for most parameterized sequences are

# decribed in the notes.

# described in the notes.

# Sequence Sequence Parameter or

# Mnemonic Name Sequence Value Mode terminfo

Line 22613

Line 22649

# APC Applicatn Program Command \E _ - Delim -

# BEL Bell * ^G - - bel

# BPH Break Permitted Here * \E B - * -

# BS Backpace * ^H - EF -

# BS BackSpace * ^H - EF -

# CAN Cancel * ^X - - - (A)

# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt

# CCH Cancel Previous Character \E T - - -

Line 22791

Line 22827

# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR

# abbreviation.

# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear

# (F) CTC parameter values:

# char tab, 3 = clear line tab, 4 = clear all char tabs on current line,

# 0 = set char tab,

# 5 = clear all char tabs, 6 = clear all line tabs.

# 1 = set line tab,

# 2 = clear char tab,

# 3 = clear line tab,

# 4 = clear all char tabs on current line,

# 5 = clear all char tabs,

# 6 = clear all line tabs.

# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept

# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character

Line 22802

Line 22843

# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT

# abbreviation.

# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR

# (I) DSR parameter values:

# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request

# 0 = ready,

# DSR, 6 = request CPR response.

# 1 = busy,

# 2 = busy, will send DSR later,

# 3 = malfunction,

# 4 = malfunction, will send DSR later,

# 5 = request DSR,

# 6 = request CPR response.

# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,

# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters:

# 1 = clear from beginning, 2 = clear.

# 0 = clear to end,

# 1 = clear from beginning,

# 2 = clear.

# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.

Line 22820

Line 22868

# (N) ECMA-48 calls this "Character Tabulation" but retains the HT

# abbreviation.

# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,

# (O) SGR parameter values:

# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,

# 0 = default mode (attributes off),

# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),

# 1 = bold,

# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,

# 2 = dim,

# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,

# 3 = italicized,

# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off

# 4 = underlined,

# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow

# 5 = slow blink,

# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set

# 6 = fast blink,

# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg

# 7 = reverse video,

# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,

# 8 = invisible,

# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set

# 9 = crossed-out (marked for deletion),

# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =

# 10 = primary font,

# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,

# 10 + n (n in 1..9) = nth alternative font,

# 61-65 = variable highlights for ideograms.

# 20 = Fraktur,

# 21 = double underline,

# 22 = turn off 2,

# 23 = turn off 3,

# 24 = turn off 4,

# 25 = turn off 5,

# 26 = proportional spacing,

# 27 = turn off 7,

# 28 = turn off 8,

# 29 = turn off 9,

# 30 = black fg,

# 31 = red fg,

# 32 = green fg,

# 33 = yellow fg,

# 34 = blue fg,

# 35 = magenta fg,

# 36 = cyan fg,

# 37 = white fg,

# 38 = set fg color as in CCITT T.416,

# 39 = set default fg color,

# 40 = black bg

# 41 = red bg,

# 42 = green bg,

# 43 = yellow bg,

# 44 = blue bg,

# 45 = magenta bg,

# 46 = cyan bg,

# 47 = white bg,

# 48 = set bg color as in CCITT T.416,

# 49 = set default bg color,

# 50 = turn off 26,

# 51 = framed,

# 52 = encircled,

# 53 = overlined,

# 54 = turn off 51 & 52,

# 55 = not overlined,

# 56-59 = reserved,

# 61-65 = variable highlights for ideograms.

# (P) SI is also called LSO, Locking Shift Zero.

Line 22843

Line 22928

# use CUD for this function and ignore VPR. ECMA calls it `Line Position

# Absolute' but retains the VPA abbreviation.

# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from

# (S) MC parameters:

# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer

# 0 = start xfer to primary aux device,

# from secondary aux device, 4 = stop relay to primary aux device, 5 =

# 1 = start xfer from primary aux device,

# start relay to primary aux device, 6 = stop relay to secondary aux device,

# 2 = start xfer to secondary aux device,

# 7 = start relay to secondary aux device.

# 3 = start xfer from secondary aux device,

# 4 = stop relay to primary aux device,

# 5 = start relay to primary aux device,

# 6 = stop relay to secondary aux device,

# 7 = start relay to secondary aux device.

# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD

# abbreviation.

Line 22857

Line 22946

# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.

# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM),

# (W) RM/SM modes are as follows:

# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),

# 1 = Guarded Area Transfer Mode (GATM),

# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),

# 2 = Keyboard Action Mode (KAM),

# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional

# 3 = Control Representation Mode (CRM),

# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),

# 4 = Insertion Replacement Mode (IRM),

# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),

# 5 = Status Report Transfer Mode (SRTM),

# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),

# 6 = Erasure Mode (ERM),

# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer

# 7 = Line Editing Mode (LEM),

# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer

# 8 = Bi-Directional Support Mode (BDSM),

# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed

# 9 = Device Component Select Mode (DCSM),

# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =

# 10 = Character Editing Mode (HEM),

# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed

# 11 = Positioning Unit Mode (PUM),

# from ECMA-48's 5th edition but are listed here for reference.

# 12 = Send/Receive Mode (SRM),

# 13 = Format Effector Action Mode (FEAM),

# 14 = Format Effector Transfer Mode (FETM),

# 15 = Multiple Area Transfer Mode (MATM),

# 16 = Transfer Termination Mode (TTM),

# 17 = Selected Area Transfer Mode (SATM),

# 18 = Tabulation Stop Mode (TSM),

# 19 = Editing Boundary Mode (EBM),

# 20 = Line Feed New Line Mode (LF/NL),

# 21 = Graphic Rendition Combination Mode (GRCM),

# 22 = Zero Default Mode (ZDM).

# The EBM and LF/NL modes have actually been removed from ECMA-48's 5th edition

# but are listed here for reference.

# (X) Select Alternate Presentation Variants is used only for non-Latin

# alphabets.

Line 23202

Line 23304

# There is a set of nonstandard terminfos used by IBM's AIX operating system.

# The AIX terminfo library diverged from SVr1 terminfo, and replaces all

# capabilities following prtr_non with the following special capabilties:

# capabilities following prtr_non with the following special capabilities:

# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,

# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,

# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,

Line 23348

Line 23450

# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode.

# This was implemented for the Hurd.

# rmxx/smxx describes the ECMA-48 strikeout/crossed-out attributes, as an

# experimental feature of tmux.

# E3 clears the terminal's scrollback buffer. This was implemented in the

# Linux 3.0 kernel as a security feature. It matches a feature which was

# added in xterm patch #107.

Line 23427

Line 23531

# 9.4.2 (Thu Mar 9 01:45:44 EST 1995):

# * Merged in DEC's official entries for its terminals. The only old

# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).

# * Replaced the translated BBN Bitgraph entries with purpose-built

# * Replaced the translated BBN BitGraph entries with purpose-built

# ones from AT&T's SVr3.

# * Replaced the AT&T entries with AT&T's official terminfos.

# * Added teleray 16, vc415, cops10.

Line 23613

Line 23717

# * Corrected hpa/vpa in linux entry. They still fail the worm test.

# * We can handle the HP meml/memu capability now.

# * Added smacs to klone entries, just as documentation.

# * Carrected ansi.sys and cit-500 entries.

# * Corrected ansi.sys and cit-500 entries.

# * Added z39, vt320-k311, v220c, and avatar entries.

# * Make pcansi use the ansi.sys invis capability.

# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,

Line 24033

Line 24137

# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in

# xterm and ncsa entries by removing the unneeded ones. Note that

# some entries will return kend & khome versus kslt and kfnd, for

# PC-style keyboards versus strict vt220 compatiblity - TD

# PC-style keyboards versus strict vt220 compatibility - TD

# 1999/3/13

# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard

Line 24626

Line 24730

# 2009-12-19

# * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler)

# * rename minix to minix-1.7, add minix entry for Minux3 -TD

# * rename minix to minix-1.7, add minix entry for Minix3 -TD

# 2009-12-26

# * add bterm (bogl 0.1.18) -TD

Line 25052

Line 25156

# (patch by Nicholas Marriott).

# + uncancel Ms in tmux entry (Harry Gindi, Nicholas Marriott).

# + add dumb-emacs-ansi -TD

# 2017-03-05

# + correct a few spelling errors in comments -TD

# + add fbterm -TD

# 2017-03-11

# + add vt100+4bsd building block, use that for older terminals rather

# than "vt100" which is now mostly used as a building block for

# terminal emulators -TD

# + modify vt100 rs2 string to reset vt52 mode and scrolling regions

# (report/analysis by Robert King) -TD

# 2017-04-01

# + minor fixes for vt100+4bsd, e.g., delay in sgr for consistency -TD

# + add smso for env230, to match sgr -TD

# + remove p7/protect from sgr in fbterm -TD

# + drop setf/setb from fbterm; setaf/setab are enough -TD

# + make xterm-pcolor sgr consistent with other capabilities -TD

# + add rmxx/smxx ECMA-48 strikeout extension to tmux and xterm-basic

# (discussion with Nicholas Marriott)

######## SHANTIH! SHANTIH! SHANTIH!