Annotation of src/share/termtypes/termtypes.master, Revision 1.19
1.1 millert 1: ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
2: #
1.19 ! millert 3: # $OpenBSD: termtypes.master,v 1.18 2000/03/14 17:22:15 millert Exp $
1.15 millert 4: #
1.11 millert 5: # This version of terminfo.src is distributed with ncurses.
6: # Report bugs to
7: # bug-ncurses@gnu.org
8: #
9: # Version 10.2.1
1.19 ! millert 10: # Date: 2000/03/19 23:06:50
1.11 millert 11: # terminfo syntax
1.1 millert 12: #
13: # Eric S. Raymond (current maintainer)
14: # John Kunze, Berkeley
15: # Craig Leres, Berkeley
16: #
1.14 millert 17: # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
1.1 millert 18: # address is no longer valid. The latest version can always be found at
1.14 millert 19: # <http://www.tuxedo.org/terminfo>.
1.1 millert 20: #
21: # PURPOSE OF THIS FILE:
22: #
23: # This file describes the capabilities of various character-cell terminals,
24: # as needed by software such as screen-oriented editors.
25: #
26: # Other terminfo and termcap files exist, supported by various OS vendors
27: # or as relics of various older versions of UNIX. This one is the longest
28: # and most comprehensive one in existence. It subsumes not only the entirety
29: # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
30: # termcap file, but also large numbers of vendor-maintained termcap and
31: # terminfo entries more complete and carefully tested than those in historical
32: # termcap/terminfo versions.
33: #
34: # Pointers to related resources (including the ncurses distribution) may
1.14 millert 35: # be found at <http://www.tuxedo.org/terminfo>.
1.1 millert 36: #
37: # INTERNATIONALIZATION:
38: #
39: # This file uses only the US-ASCII character set (no ISO8859 characters).
40: #
41: # This file assumes a US-ASCII character set. If you need to fix this, start
42: # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
43: # for your character set. \E(A and \E)A enables the British character set
44: # with the pound sign at position 2/3.
45: #
46: # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
47: # C1 characters are considered the first-byte set of the Japanese encodings,
48: # so \E)0 should be avoided in <enacs> and initialization strings.
49: #
50: # FILE FORMAT:
51: #
52: # The version you are looking at may be in any of three formats: master
53: # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
54: # which by the format given in the header above.
55: #
56: # The master format is accepted and generated by the terminfo tools in the
57: # ncurses suite; it differs from stock (System V-compatible) terminfo only
58: # in that it admits a group of capabilities (prefixed `OT') equivalent to
59: # various obsolete termcap capabilities. You can, thus, convert from master
60: # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
61: # you have ncurses `tic -I' is nicer (among other things, it automatically
62: # outputs entries in a canonical form).
63: #
64: # The termcap version is generated automatically from the master version
65: # using tic -C. This filtering leaves in the OT capabilities under their
66: # original termcap names. All translated entries fit within the 1023-byte
67: # string-table limit of archaic termcap libraries except where explicitly
68: # noted below. Note that the termcap translation assumes that your termcap
69: # library can handle multiple tc capabilities in an entry. 4.4BSD has this
70: # capability. Older versions of GNU termcap, through 1.3, do not.
71: #
72: # For details on these formats, see terminfo(5) in the ncurses distribution,
73: # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
74: # curses has been declared obsolete by the caretakers of the 4.4BSD sources
75: # as of June 1995; they are encouraging everyone to migrate to ncurses.
76: #
77: # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
78: # no entry in this file has embedded comments. This is so source translation
79: # to termcap only has to carry over leading comments. Also, no name field
80: # contains embedded whitespace (such whitespace confuses rdist).
81: #
82: # Further note: older versions of this file were often installed with an editor
83: # script (reorder) that moved the most common terminal types to the front of
84: # the file. This should no longer be necessary, as the file is now ordered
85: # roughly by type frequency with ANSI/VT100 and other common types up front.
86: #
87: # Some information has been merged in from terminfo files distributed by
88: # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
89: # comes from vendors who maintain official terminfos for their hardware
90: # (notably DEC and Wyse).
91: #
92: # A detailed change history is included at the end of this file.
93: #
94: # FILE ORGANIZATION:
95: #
96: # Comments in this file begin with # - they cannot appear in the middle
97: # of a terminfo/termcap entry (this feature had to be sacrificed in order
98: # to allow standard terminfo and termcap syntax to be generated cleanly from
99: # the master format). Individual capabilities are commented out by
100: # placing a period between the colon and the capability name.
101: #
102: # The file is divided up into major sections (headed by lines beginning with
103: # the string "########") and minor sections (beginning with "####"); do
104: #
105: # grep "^####" <file> | more
106: #
107: # to see a listing of section headings. The intent of the divisions is
108: # (a) to make it easier to find things, and (b) to order the database so
109: # that important and frequently-encountered terminal types are near the
110: # front (so that you'll get reasonable search efficiency from a linear
111: # search of the termcap form even if you don't use reorder). Minor sections
112: # usually correspond to manufacturers or standard terminal classes.
113: # Parenthesized words following manufacturer names are type prefixes or
114: # product line names used by that manufacturers.
115: #
116: # HOW TO READ THE ENTRIES:
117: #
118: # The first name in an entry is the canonical name for the model or
119: # type, last entry is a verbose description. Others are mnemonic synonyms for
120: # the terminal.
121: #
122: # Terminal names look like <manufacturer> <model> - <modes/options>
123: # The part to the left of the dash, if a dash is present, describes the
124: # particular hardware of the terminal. The part to the right may be used
125: # for flags indicating special ROMs, extra memory, particular terminal modes,
126: # or user preferences.
127: #
128: # All names should be in lower case, for consistency in typing.
129: #
130: # The following are conventionally used suffixes:
131: # -2p Has two pages of memory. Likewise 4p, 8p, etc.
132: # -am Enable auto-margin.
133: # -m Monochrome. Suppress color support
134: # -mc Magic-cookie. Some terminals (notably older Wyses) can
135: # only support one attribute without magic-cookie lossage.
136: # Their base entry is usually paired with another that
137: # uses magic cookies to support multiple attributes.
138: # -nam No auto-margin - suppress <am> capability
139: # -nl No labels - suppress soft labels
140: # -ns No status line - suppress status line
141: # -rv Terminal in reverse video mode (black on white)
142: # -s Enable status line.
143: # -vb Use visible bell (<flash>) rather than <bel>.
144: # -w Wide - in 132 column mode.
145: # If a name has multiple suffixes and one is a line height, that one should
146: # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
147: #
148: # Entries with embedded plus signs are designed to be included through use/tc
149: # capabilities, not used as standalone entries.
150: #
151: # To avoid search clashes, some older all-numeric names for terminals have
152: # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
153: # All primary names of terminals now have alphanumeric prefixes.
154: #
155: # Comments marked "esr" are mostly results of applying the termcap-compiler
156: # code packaged with ncurses and contemplating the resulting error messages.
157: # In many cases, these indicated obvious fixes to syntax garbled by the
158: # composers. In a few cases, I was able to deduce corrected forms for garbled
159: # capabilities by looking at context. All the information in the original
160: # entries is preserved in the comments.
161: #
162: # In the comments, terminfo capability names are bracketed with <> (angle
163: # brackets). Termcap capability names are bracketed with :: (colons).
164: #
165: # INTERPRETATION OF USER CAPABILITIES
166: #
167: # The System V Release 4 and XPG4 terminfo format defines ten string
168: # capabilities for use by applications, <u0>...<u9>. In this file, we use
169: # certain of these capabilities to describe functions which are not covered
170: # by terminfo. The mapping is as follows:
171: #
172: # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
173: # u8 terminal answerback description
174: # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
175: # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
176: #
177: # The terminal enquire string <u9> should elicit an answerback response
178: # from the terminal. Common values for <u9> will be ^E (on older ASCII
179: # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
180: #
181: # The cursor position request (<u7>) string should elicit a cursor position
182: # report. A typical value (for VT100 terminals) is \E[6n.
183: #
184: # The terminal answerback description (u8) must consist of an expected
185: # answerback string. The string may contain the following scanf(3)-like
186: # escapes:
187: #
188: # %c Accept any character
189: # %[...] Accept any number of characters in the given set
190: #
191: # The cursor position report (<u6>) string must contain two scanf(3)-style
192: # %d format elements. The first of these must correspond to the Y coordinate
193: # and the second to the %d. If the string contains the sequence %i, it is
194: # taken as an instruction to decrement each value after reading it (this is
195: # the inverse sense from the cup string). The typical CPR value is
196: # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
197: #
1.14 millert 198: # These capabilities are used by tack(1m), the terminfo action checker
199: # (distributed with ncurses 5.0).
1.1 millert 200: #
201: # TABSET FILES
202: #
203: # All the entries in this file have been edited to assume that the tabset
204: # files directory is /usr/share/tabset, in conformance with the File Hierarchy
205: # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
206: # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
207: #
208: # No curses package we know of actually uses these files. If their location
209: # is an issue, you will have to hand-patch the file locations before compiling
210: # this file.
211: #
212: # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
213: #
214: # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
215: # character-cell terminals are increasingly replaced by X displays, much of
216: # this file is becoming a historical document (this is part of the reason for
1.14 millert 217: # the new organization, which puts ANSI types, xterm, Unix consoles,
1.1 millert 218: # and vt100 up front in confidence that this will catch 95% of new hardware).
219: #
220: # For the terminal types still alive, I'd like to have manufacturer's
221: # contact data (Internet address and/or snail-mail + phone).
222: #
223: # I'm also interested in enriching the comments so that the latter portions of
224: # the file do in fact become a potted history of VDT technology as seen by
225: # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
226: # include its live/dead/out-of-the-business status, and for as many
227: # terminal types as possible to be tagged with information like years
228: # of heaviest use, popularity, and interesting features.
229: #
230: # I'm especially interested in identifying the obscure entries listed under
231: # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
232: # wisdom about them gets lost. If you know a lot about obscure old terminals,
233: # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
234: # eyeball it for things you can identify and describe.
235: #
236: # If you have been around long enough to contribute, please read the file
237: # with this in mind and send me your annotations.
238: #
239: # COPYRIGHTS AND OTHER DELUSIONS
240: #
241: # The BSD ancestor of this file had a standard Regents of the University of
242: # California copyright with dates from 1980 to 1993.
243: #
244: # Some information has been merged in from a terminfo file SCO distributes.
245: # It has an obnoxious boilerplate copyright which I'm ignoring because they
246: # took so much of the content from the ancestral BSD versions of this file
247: # and didn't attribute it, thereby violating the BSD Regents' copyright.
248: #
249: # Not that anyone should care. However many valid functions copyrights may
250: # serve, putting one on a termcap/terminfo file with hundreds of anonymous
251: # contributors makes about as much sense as copyrighting a wall-full of
252: # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
253: #
254: # This file deliberately has no copyright. It belongs to no one and everyone.
255: # If you claim you own it, you will merely succeed in looking like a fool.
256: # Use it as you like. Use it at your own risk. Copy and redistribute freely.
257: # There are no guarantees anywhere. Svaha!
258: #
259:
260: ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
261: #
1.14 millert 262: # This section describes terminal classes and brands that are still
1.1 millert 263: # quite common.
264: #
265:
266: #### Specials
267: #
268: # Special "terminals". These are used to label tty lines when you don't
269: # know what kind of terminal is on it. The characteristics of an unknown
270: # terminal are the lowest common denominator - they look about like a ti 700.
271: #
272:
1.11 millert 273: dumb|80-column dumb tty,
274: am,
1.1 millert 275: cols#80,
1.11 millert 276: bel=^G, cr=^M, cud1=^J, ind=^J,
277: unknown|unknown terminal type,
278: gn, use=dumb,
1.1 millert 279: lpr|printer|line printer,
1.11 millert 280: OTbs, hc, os,
281: cols#132, lines#66,
282: bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
283: glasstty|classic glass tty interpreting ASCII control characters,
1.19 ! millert 284: OTbs, am,
1.1 millert 285: cols#80,
1.19 ! millert 286: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
! 287: kcud1=^J, nel=^M^J, .kbs=^H,
! 288:
! 289: vanilla,
! 290: OTbs,
! 291: bel=^G, cr=^M, cud1=^J, ind=^J,
1.1 millert 292:
293: #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
294: #
295: # See the end-of-file comment for more on these.
296: #
297:
1.19 ! millert 298: # ANSI capabilities are broken up into pieces, so that a terminal
! 299: # implementing some ANSI subset can use many of them.
! 300: ansi+local1,
! 301: cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
! 302: ansi+local,
! 303: cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
! 304: cuu=\E[%p1%dA,
! 305: use=ansi+local1,
! 306: ansi+tabs,
! 307: cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g,
! 308: ansi+inittabs,
! 309: it#8, use=ansi+tabs,
! 310: ansi+erase,
! 311: clear=\E[H\E[J, ed=\E[J, el=\E[K,
! 312: ansi+rca,
! 313: hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
! 314: ansi+cup,
! 315: cup=\E[%i%p1%d;%p2%dH, home=\E[H,
! 316: ansi+rep,
! 317: rep=%p1%c\E[%p2%{1}%-%db,
! 318: ansi+idl1,
! 319: dl1=\E[M, il1=\E[L,
! 320: ansi+idl,
! 321: dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
! 322: ansi+idc,
! 323: dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
! 324: ansi+arrows,
! 325: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
! 326: khome=\E[H,
! 327: ansi+sgr|ansi graphic renditions,
! 328: blink=\E[5m, invis=\E[8m, rev=\E[7m, sgr0=\E[0m,
! 329: ansi+sgrso|ansi standout only,
! 330: rmso=\E[m, smso=\E[7m,
! 331: ansi+sgrul|ansi underline only,
! 332: rmul=\E[m, smul=\E[4m,
! 333: ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
! 334: bold=\E[1m,
! 335: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
! 336: ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
! 337: dim=\E[2m,
! 338: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
! 339: ansi+pp|ansi printer port,
! 340: mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
! 341: ansi+csr|ansi scroll-region plus cursor save & restore,
! 342: csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
! 343:
1.1 millert 344: # The IBM PC alternate character set. Plug this into any Intel console entry.
345: # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
346: # ROM graphics for control characters such as the diamond, up- and down-arrow.
347: # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
348: # will work with any Intel console, they all seem to have inherited \E[11m
349: # from the ANSI.SYS de-facto standard.
1.11 millert 350: klone+acs|alternate character set for ansi.sys displays,
351: acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1.1 millert 352: rmacs=\E[10m, smacs=\E[11m,
353:
354: # Highlight controls corresponding to the ANSI.SYS standard. Most
355: # console drivers for Intel boxes obey these. Makes the same assumption
356: # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
357: # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
1.11 millert 358: klone+sgr|attribute control for ansi.sys displays,
359: blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m,
360: rmpch=\E[10m, rmso=\E[m, rmul=\E[m,
1.1 millert 361: sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1.11 millert 362: sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
363: use=klone+acs,
1.1 millert 364:
365: # Highlight controls corresponding to the ANSI.SYS standard. *All*
366: # console drivers for Intel boxes obey these. Does not assume \E[11m will
367: # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
368: # diamond and arrow characters under curses.
1.11 millert 369: klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
370: blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
371: rmul=\E[m,
1.1 millert 372: sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
1.11 millert 373: sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
374: use=klone+acs,
1.1 millert 375:
376: # KOI8-R (RFC1489) acs (alternate character set)
377: # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
1.11 millert 378: klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
1.1 millert 379: acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
380: rmacs=\E[10m, smacs=\E[11m,
381:
382: # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
383: # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
384: # but equivalent strings that don't rely on that coincidence:
385: # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
386: # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
387: # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
388: # They match a subset of ECMA-48.
1.11 millert 389: klone+color|color control for ansi.sys and ISO6429-compatible displays,
390: colors#8, ncv#3, pairs#64,
1.1 millert 391: op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
392:
393: # This is better than klone+color, it doesn't assume white-on-black as the
394: # default color pair, but many `ANSI' terminals don't grok the <op> cap.
1.11 millert 395: ecma+color|color control for ECMA-48-compatible terminals,
396: colors#8, ncv#3, pairs#64,
1.1 millert 397: op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
398:
399: # Attribute control for ECMA-48-compatible terminals
1.11 millert 400: ecma+sgr|attribute capabilities for true ECMA-48 terminals,
401: rmso=\E[27m, rmul=\E[24m,
402: use=klone+sgr,
1.1 millert 403:
404: # For comparison, here are all the capabilities implied by the Intel
405: # Binary Compatibility Standard (level 2) that fit within terminfo.
406: # For more detail on this rather pathetic standard, see the comments
407: # near the end of this file.
1.11 millert 408: ibcs2|Intel Binary Compatibility Standard prescriptions,
409: cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
410: cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
411: dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
412: hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
1.1 millert 413: indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
1.11 millert 414: smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
1.1 millert 415:
416: #### ANSI/ECMA-48 terminals and terminal emulators
417: #
418: # See near the end of this file for details on ANSI conformance.
419: # Don't mess with these entries! Lots of other entries depend on them!
420: #
421: # This section lists entries in a least-capable to most-capable order.
422: # if you're in doubt about what `ANSI' matches yours, try them in that
423: # order and back off from the first that breaks.
424:
1.19 ! millert 425: # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
! 426: # and more than one page of memory. It uses local motions instead of
! 427: # direct cursor addressing, and makes almost no assumptions. It does
! 428: # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
! 429: ansi-mr|mem rel cup ansi,
! 430: am, xon,
! 431: cols#80, lines#24, use=vanilla, use=ansi+erase,
! 432: use=ansi+local1,
! 433:
! 434: # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
! 435: # beware of screen size problems and memory relative cursor addressing.
1.1 millert 436: ansi-mini|any ansi terminal with pessimistic assumptions,
1.19 ! millert 437: am, xon,
! 438: cols#80, lines#24, use=vanilla, use=ansi+cup,
! 439: use=ansi+erase,
! 440:
! 441: # ansi-mtabs adds relative addressing and minimal tab support
! 442: ansi-mtabs|any ansi terminal with pessimistic assumptions,
! 443: it#8,
! 444: ht=^I, use=ansi+local1, use=ansi-mini,
1.1 millert 445:
446: # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
447: #
448: # The following is an entry for the full ANSI 3.64 (1977). It lacks
449: # padding, but most terminals using the standard are "fast" enough
450: # not to require any -- even at 9600 bps. If you encounter problems,
451: # try including the padding specifications.
452: #
453: # Note: the :as: and :ae: specifications are not implemented here, for
454: # the available termcap documentation does not make clear WHICH alternate
455: # character set to specify. ANSI 3.64 seems to make allowances for several.
456: # Please make the appropriate adjustments to fit your needs -- that is
457: # if you will be using alternate character sets.
458: #
459: # There are very few terminals running the full ANSI 3.64 standard,
460: # so I could only test this entry on one verified terminal (Visual 102).
461: # I would appreciate the results on other terminals sent to me.
462: #
463: # Please report comments, changes, and problems to:
464: #
465: # U.S. MAIL: Hugh Hansard
466: # Box: 22830
467: # Emory University
468: # Atlanta, GA. 30322.
469: #
470: # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
471: #
1.14 millert 472: # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
1.1 millert 473: ansi77|ansi 3.64 standard 1977 version,
1.11 millert 474: OTbs, am, mir,
1.1 millert 475: cols#80, it#8, lines#24,
476: bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
477: cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
478: cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
479: home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
480: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
1.14 millert 481: kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
482: rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
483: smso=\E[7m, smul=\E[4m,
1.1 millert 484:
485: # Procomm and some other ANSI emulations don't recognize all of the ANSI-
486: # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
487: # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
488: # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
489: # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
490: # to confuse many emulators. On the other hand, we can count on these programs
491: # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
492: # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
493: # ANSI.SYS influence.
494: # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
495: pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
1.11 millert 496: OTbs, am, mir, msgr,
1.1 millert 497: cols#80, it#8, lines#24,
1.11 millert 498: bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
499: cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
500: dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
501: hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
502: kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
503: use=klone+sgr-dumb,
504: pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
505: lines#25, use=pcansi-m,
506: pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
507: lines#33, use=pcansi-m,
508: pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
509: lines#43, use=pcansi-m,
1.1 millert 510: # The color versions. All PC emulators do color...
511: pcansi|ibm-pc terminal programs claiming to be ansi,
1.11 millert 512: use=klone+color, use=pcansi-m,
513: pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
514: lines#25, use=pcansi,
515: pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
516: lines#33, use=pcansi,
517: pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
518: lines#43, use=pcansi,
1.1 millert 519:
520: # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
521: # If you want pound signs rather than dollars, replace `B' with `A'
522: # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
523: # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
1.11 millert 524: ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
525: mc5i,
526: cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
527: cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
528: ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
529: ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
530: kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
531: kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
532: rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
533: s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g,
534: vpa=\E[%i%p1%dd, use=pcansi-m,
1.1 millert 535:
536: # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
537: # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
538: # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
1.11 millert 539: ansi|ansi/pc-term compatible with color,
540: u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
541: u9=\E[c,
542: use=ecma+color, use=klone+sgr, use=ansi-m,
543:
1.19 ! millert 544: # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
! 545: # all the normal ANSI stuff with no extensions. It assumes
! 546: # insert/delete line/char is there, so it won't work with
! 547: # vt100 clones. It assumes video attributes for bold, blink,
! 548: # underline, and reverse, which won't matter much if the terminal
! 549: # can't do some of those. Padding is assumed to be zero, which
! 550: # shouldn't hurt since xon/xoff is assumed.
! 551: ansi-generic|generic ansi standard terminal,
! 552: am, xon,
! 553: cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
! 554: use=ansi+rca, use=ansi+erase, use=ansi+tabs,
! 555: use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
! 556: use=ansi+sgrbold, use=ansi+arrows,
! 557:
1.11 millert 558: #### DOS ANSI.SYS variants
559: #
560: # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
561: # documentation (except for the keyboard key reassignment feature, which
562: # doen't fit the <pfkey> model well). The klone+acs sequences were valid
563: # though undocumented. The <pfkey> capability is untested but should work for
564: # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
565: # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
566: ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
567: OTbs, am, mir, msgr, xon,
568: cols#80, lines#25,
569: clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
570: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
571: is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
572: khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u,
573: rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
574: u7=\E[6n,
575: use=klone+color, use=klone+sgr,
576: ansi.sys|ANSI.SYS 3.1 and later versions,
577: el=\E[K, use=ansi.sys-old,
578:
579: #
580: # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
581: # This should only be used when the terminal emulator cannot redefine the keys.
582: # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
583: # definitions must be restored. If the terminal emulator is quit while in vi
584: # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
585: # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
586: # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
587: # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
588: # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
589: # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
590: # Consequently the End keypad key could not be set (it is relatively safe and
591: # actually useful because it sends ^@ O, which beeps and opens a line above).
592: ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
593: is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
594: rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
595: smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
596: use=ansi.sys,
597: #
598: # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
599: nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
600: dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
601: is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, use=ansi.sys,
602: #
603: # See ansi.sysk and nansi.sys above.
604: nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
605: dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
606: is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
607: use=ansi.sysk,
608:
609: #### ANSI console types
610: #
611:
612: #### BeOS
613: #
614: # BeOS entry for Terminal program Seems to be almost ANSI
615: beterm|BeOS Terminal,
616: am, eo, mir, msgr, xenl, xon,
617: colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
618: bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
619: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
620: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
621: dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
622: home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
623: ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
624: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
625: kdch1=\E[3~, kend=\E[4~, kf1=\E[11~, kf10=\E[20~,
626: kf11=\E[21~, kf12=\E[22~, kf2=\E[12~, kf3=\E[13~,
627: kf4=\E[14~, kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~,
628: kf9=\E[19~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
629: kspd=^Z, nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM,
630: rmir=\E[4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
631: setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
632: setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
633: sgr0=\E[0;10m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
634: u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, vpa=\E[%i%p1%dd,
1.1 millert 635:
636: #### Linux consoles
637: #
638:
639: # This entry is good for the 1.2.13 or later version of the Linux console.
640: #
641: # ***************************************************************************
642: # * *
643: # * WARNING: *
644: # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
645: # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
646: # * character. Here are the keymap replacement lines that will set this up: *
647: # * *
648: # keycode 15 = Tab Tab
649: # alt keycode 15 = Meta_Tab
650: # shift keycode 15 = F26
651: # string F26 ="\033[Z"
652: # * *
653: # * This has to use a key slot which is unfortunate (any unused one will *
654: # * do, F26 is the higher-numbered one). The change ought to be built *
655: # * into the kernel tables. *
656: # * *
657: # ***************************************************************************
658: #
659: # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
660: # and it matters, turn off <ccc>. The %02x escape used to implement this is
661: # not back-portable to SV curses and not supported in ncurses versions before
662: # 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
663: # themselves; this entry assumes that capability.
664: #
1.14 millert 665: # This entry is good for the 1.2.13 or later version of the Linux console.
666: #
667: # ***************************************************************************
668: # * *
669: # * WARNING: *
670: # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
671: # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
672: # * character. Here are the keymap replacement lines that will set this up: *
673: # * *
674: # keycode 15 = Tab Tab
675: # alt keycode 15 = Meta_Tab
676: # shift keycode 15 = F26
677: # string F26 ="\033[Z"
678: # * *
679: # * This has to use a key slot which is unfortunate (any unused one will *
680: # * do, F26 is the higher-numbered one). The change ought to be built *
681: # * into the kernel tables. *
682: # * *
683: # ***************************************************************************
684: #
685: # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
686: # and it matters, turn off <ccc>. The %02x escape used to implement this is
687: # not back-portable to SV curses and not supported in ncurses versions before
688: # 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
689: # themselves; this entry assumes that capability.
690: #
1.11 millert 691: # The 2.2.x kernels add a private mode that sets the cursor type; use that to
692: # get a block cursor for cvvis.
693: # reported by Frank Heckenbach <frank@g-n-u.de>.
1.1 millert 694: linux|linux console,
695: am, bce, eo, mir, msgr, xenl, xon,
1.11 millert 696: it#8, ncv#18,
1.1 millert 697: acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1.11 millert 698: bel=^G, civis=\E[?25l\E[?1c, clear=\E[H\E[J,
699: cnorm=\E[?25h\E[?0c, cr=^M, csr=\E[%i%p1%d;%p2%dr,
700: cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
701: cuu1=\E[A, cvvis=\E[?25h\E[?8c, dch=\E[%p1%dP, dch1=\E[P,
702: dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
703: el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
704: hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
705: il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
706: kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
707: kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
708: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
709: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
710: kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
711: kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1.1 millert 712: khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
713: nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m,
714: rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
715: sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
716: smir=\E[4h, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
717: u7=\E[6n, u8=\E[?6c, u9=\E[c, vpa=\E[%i%p1%dd,
718: use=klone+sgr, use=ecma+color,
1.11 millert 719: linux-m|Linux console no color,
720: colors@, pairs@,
721: setab@, setaf@, setb@, setf@, use=linux,
722: linux-c-nc|linux console 1.3.x hack for ncurses only,
1.1 millert 723: ccc,
1.11 millert 724: initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
725: oc=\E]R,
726: use=linux,
1.1 millert 727: # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1.11 millert 728: linux-c|linux console 1.3.6+ with private palette for each virtual console,
729: ccc,
730: colors#8, pairs#64,
731: initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p3%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p4%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;,
732: oc=\E]R,
733: use=linux,
1.1 millert 734:
735: # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1.11 millert 736: linux-nic|linux with ich/ich1 suppressed for non-curses programs,
737: ich@, ich1@,
738: use=linux,
1.1 millert 739:
740: # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
741: # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1.11 millert 742: linux-koi8|linux with koi8 alternate character set,
1.1 millert 743: acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
1.11 millert 744: use=linux, use=klone+koi8acs,
1.1 millert 745:
746: # Another entry for KOI8-r with Qing Long's acsc.
747: # (which one better complies with the standard?)
748: linux-koi8r|linux with koi8-r alternate character set,
749: use=linux, use=klone+koi8acs,
750:
1.14 millert 751: # Entry for the latin1 and latin2 fonts
752: linux-lat|linux with latin1 or latin2 alternate character set,
753: acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
754: use=linux,
755:
756: #### Mach
757: #
758:
759: # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1.11 millert 760: mach|Mach Console,
761: am, km,
762: cols#80, it#8, lines#25,
763: bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
764: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
765: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
766: cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
767: el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
768: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
769: kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
770: kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
771: kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
772: kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
773: smso=\E[7m, smul=\E[4m,
774: mach-bold|Mach Console with bold instead of underline,
775: rmul=\E[0m, smul=\E[1m,
776: use=mach,
777: mach-color|Mach Console with ANSI color,
778: colors#8, pairs#64,
779: dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
780: setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
781: use=mach,
782:
1.14 millert 783: #### OSF Unix
784: #
785:
786: # OSF/1 1.1 Snapshot 2
787: pmcons|pmconsole|PMAX console,
788: am,
789: cols#128, lines#57,
790: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
791: ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
792: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1.11 millert 793:
794: # SCO console and SOS-Syscons console for 386bsd
795: # (scoansi: had unknown capabilities
796: # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
797: # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
798: # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
799: # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
800: # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
801: # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
802: # on the <smacs>=\E[12m -- esr)
1.1 millert 803: #
1.11 millert 804: # klone+sgr-dumb is an error since the acsc does not match -TD
1.1 millert 805: #
1.11 millert 806: # In this description based on SCO's keyboard(HW) manpage list of default function key
807: # values:
808: # F13-F24 are shifted F1-F12
809: # F25-F36 are control F1-F12
810: # F37-F48 are shift+control F1-F12
811: scoansi|SCO Extended ANSI standard crt,
812: OTbs, am, eo, xon,
813: colors#8, cols#80, it#8, lines#25, pairs#64,
814: acsc=0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`ja0fxgqh2jYk?lZm@nEqDtCu4vAwBx3~y,
815: blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
816: cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
817: cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
818: ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, invis=\E[8m, kbeg=\E[E,
819: kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
820: kcuu1=\E[A, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
821: kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
822: kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
823: kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
824: kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
825: kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
826: kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
827: kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
828: kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
829: kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
830: kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[37;40m, rev=\E[7m,
831: ri=\E[T, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
832: setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
833: sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
834: sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
1.1 millert 835:
1.11 millert 836: # This actually describes the generic SVr4 display driver for Intel boxes.
837: # The <dim=\E[2m> isn't documented and therefore may not be reliable.
838: # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
839: att6386|at386|386at|AT&T WGS 6386 console,
840: am, bw, eo, xon,
841: cols#80, it#8, lines#25,
842: acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
843: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
844: clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
845: cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1.1 millert 846: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1.11 millert 847: cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
848: dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
849: home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
850: ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
851: indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
852: kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
853: kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
854: kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
855: kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
856: knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
857: ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
858: sc=\E7,
859: sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
860: sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
861: tbc=\E[2g, vpa=\E[%i%p1%dd,
862: use=klone+color,
863: # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
864: pc6300plus|AT&T 6300 plus,
865: OTbs, am, xon,
866: cols#80, lines#24,
867: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
868: clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
869: cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
870: dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
871: home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
872: invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
873: kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
874: kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
875: nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1.1 millert 876: smso=\E[7m, smul=\E[4m, tbc=\E[3g,
877:
1.11 millert 878: # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1.1 millert 879: #
1.11 millert 880: # I have a UNIX PC which I use as a terminal attached to my Linux PC.
881: # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
882: # is broken. All the special key sequences are broken, making it unusable
883: # with Emacs. The problem stems from the following:
884: #
885: # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
886: # keypad!), loadable fonts, and strange highlighting modes ("dithered"
887: # half-intensity, "smeared" bold, and real strike-out, for example.) It also
888: # uses resizable terminal windows, but the bundled terminal program always
889: # uses an 80x24 window (and doesn't support seem to support a 132-column
890: # mode.)
891: #
892: # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
893: # library which was a superset of SVr3.5 curses (called tam, for "terminal
894: # access method".) tam includes support for real, overlapping windows,
895: # onscreen function key labels, and bitmap graphics. But since the primary
896: # user interface on the UNIX PC was a GUI program (ua, for "user
897: # assistant",) and remote administration was considered important for the
898: # machine, tam also supported VT100-compatible terminals attached to the
899: # serial port or used across the StarLan network. To simulate the extra keys
900: # not present on a VT100, users could press ESC and a two-letter sequence,
901: # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
902: # however, were not the same as those sent by the actual Undo key. The
903: # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
904: # (If you're interested in adding some of the tam calls to ncurses, btw, I
905: # have the full documentation and several programs which use tam. It also
906: # used an extended terminfo format to describe key sequences, special
907: # highlighting modes, etc.)
908: #
909: # KEYS: This means that ncurses would quite painful on the UNIX PC, since
910: # there are two sequences for every key-modifier combination (local keyboard
911: # sequence and remote "VT100" sequence.) But I doubt many people are trying
912: # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
913: # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
914: # seem to have been built from the manual describing the VT100 sequences.
915: # This means it doesn't work for a real live UNIX PC.
916: #
917: # FONTS: The UNIX PC also has a strange interpretation of "alternate
918: # character set". Rather than the VT100 graphics you might expect, it allows
919: # up to 8 custom fonts to be loaded at any given time. This means that
920: # programs expecting VT100 graphics will usually be disappointed. For this
921: # reason I have disabled the smacs/rmacs sequences, but they could easily be
922: # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
923: # manpage), should you wish to do so:
924: #
925: # SGR10 - Select font 0 - ESC [ 10 m or SO
926: # SGR11 - Select font 1 - ESC [ 11 m or SI
927: # SGR12 - Select font 2 - ESC [ 12 m
928: # ... (etc.)
929: # SGR17 - Select font 7 - ESC [ 17 m
930: #
931: # Graphics for line drawing are not reliably found at *any* character
932: # location because the UNIX PC has dynamically reloadable fonts. I use font
933: # 0 for regular text and font 1 for italics, but this is by no means
934: # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
935: #
936: # MISC: The cursor visible/cursor invisible sequences were swapped in the
937: # distributed terminfo.
938: #
939: # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
940: # the UNIX PC terminfo entry. The modified version works great with Lynx,
941: # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
942: # attached by serial cable. In Emacs, even the Undo key works, and many
943: # applications can now use the F1-F8 keys.
944: #
945: # esr's notes:
946: # Terminfo entry for the AT&T Unix PC 7300
947: # from escape(7) in Unix PC 7300 Manual.
948: # Somewhat similar to a vt100-am (but different enough
949: # to redo this from scratch.)
950: #
951: # /***************************************************************
952: # *
953: # * FONT LOADING PROGRAM FOR THE UNIX PC
954: # *
955: # * This routine loads a font defined in the file ALTFONT
956: # * into font memory slot #1. Once the font has been loaded,
957: # * it can be used as an alternative character set.
958: # *
959: # * The call to ioctl with the argument WIOCLFONT is the key
960: # * to this routine. For more information, see window(7) in
961: # * the PC 7300 documentation.
962: # ***************************************************************/
963: # #include <string.h> /* needed for strcpy call */
964: # #include <sys/window.h> /* needed for ioctl call */
965: # #define FNSIZE 60 /* font name size */
966: # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
967: # /*
968: # * The file /usr/lib/wfont/special.8.ft comes with the
969: # * standard PC software. It defines a graphics character set
970: # * similar to that of the Teletype 5425 terminal. To view
971: # * this or other fonts in /usr/lib/wfont, use the command
972: # * cfont <filename>. For further information on fonts see
973: # * cfont(1) in the PC 7300 documentation.
974: # */
975: #
976: # struct altfdata /* structure for alt font data */
977: # {
978: # short altf_slot; /* memory slot number */
979: # char altf_name[FNSIZE]; /* font name (file name) */
980: # };
981: # ldfont()
982: # {
983: # int wd; /* window in which altfont will be */
984: # struct altfdata altf;
985: # altf.altf_slot=1;
986: # strcpy(altf.altf_name,ALTFONT);
987: # for (wd =1; wd < 12; wd++) {
988: # ioctl(wd, WIOCLFONT,&altf);
989: # }
990: # }
991: #
992: # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
993: # they're confirmed by the man page for the System V display---esr)
994: #
995: att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
996: am, xon,
997: cols#80, it#8, lines#24,
998: bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
999: clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1000: cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1001: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1002: cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1003: ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1004: il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1005: kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1006: kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1007: kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1008: kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1009: kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1010: kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1011: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1012: ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1013: kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1014: kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1015: kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1016: kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1017: kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1018: ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1019: rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1020: smul=\E[4m,
1021:
1022: # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1023: # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1024: # for the application keypad mode. We have added iris-ansi-ap rather than
1025: # change the original to keypad mode.
1026: #
1027: # (iris-ansi: added rmam/smam based on init string -- esr)
1028: #
1029: # This entry, and those derived from it, is used in xwsh (also known as
1030: # winterm). Some capabilities that do not fit into the terminfo model
1031: # include the shift- and control-functionkeys:
1032: #
1033: # F1-F12 generate different codes when shift or control modifiers are used.
1034: # For example:
1035: # F1 \E[001q
1036: # shift F1 \E[013q
1037: # control-F1 \E[025q
1038: #
1039: # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1040: # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1041: #
1042: # The cursor keys also have different codes:
1043: # control-up \E[162q
1044: # control-down \E[165q
1045: # control-left \E[159q
1046: # control-right \E[168q
1047: #
1048: # shift-up \E[161q
1049: # shift-down \E[164q
1050: # shift-left \E[158q
1051: # shift-right \E[167q
1052: #
1053: # control-tab \[072q
1054: #
1055: iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1056: am,
1057: cols#80, it#8, lines#40,
1058: bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1059: cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1060: cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1061: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1062: cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1063: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1064: home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1065: is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1066: kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1067: kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1068: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1069: kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1070: kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1071: kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1072: kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1073: knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1074: kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1075: rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1076: sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1077: tbc=\E[3g,
1078: iris-ansi-ap|IRIS ANSI in application-keypad mode,
1079: is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1080: kf11=\E[011q, kf12=\E[012q, kf9=\E[009q,
1081: use=iris-ansi,
1082:
1083: # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1084: # (T.Dickey 98/1/24)
1085: iris-color|xwsh|IRIX ANSI with color,
1086: ncv#33,
1087: csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1088: ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1089: rmul=\E[24m, rs1=\Ec,
1090: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1091: sitm=\E[3m, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
1092: use=klone+color, use=iris-ansi-ap,
1093:
1094: # The following is a version of the ibm-pc entry distributed with PC/IX,
1095: # (Interactive Systems' System 3 for the Big Blue), modified by Richard
1096: # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
1097: # (the former is untrue, and the latter failed under UCB/man); standout and
1098: # underline modes have been added. Note: this entry describes the "native"
1099: # capabilities of the PC monochrome display, without ANY emulation; most
1100: # communications packages (but NOT PC/IX connect) do some kind of emulation.
1101: pcix|PC/IX console,
1102: am, bw, eo,
1103: cols#80, lines#24,
1104: clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1105: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1106: home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1107: smul=\E[4m,
1108:
1109: # (ibmpcx: this entry used to be known as ibmx.
1110: # It formerly included the following extension capabilities:
1111: # :GC=b:GL=v:GR=t:RT=^J:\
1112: # :GH=\E[196g:GV=\E[179g:\
1113: # :GU=\E[193g:GD=\E[194g:\
1114: # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1115: # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1116: # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1117: # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1118: # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
1119: # what was there before. -- esr)
1120: ibmpcx|xenix|ibmx|IBM PC xenix console display,
1121: OTbs, am, msgr,
1122: cols#80, lines#25,
1123: clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1124: cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1125: ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1126: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1127: kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1128: kpp=\E[Z,
1129: use=klone+acs, use=klone+sgr,
1130:
1.14 millert 1131: #### QNX
1132: #
1.11 millert 1133:
1134: # QNX 4.0 Console
1135: # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1136: # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1137: # right corner without triggering a scroll. The ncurses terminfo library can
1138: # handle this case with the <ich1> capability, and prefers <am> for better
1139: # optimization. Bug: The <op> capability resets attributes.
1140: # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1141: # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1142: qnx|qnx4|qnx console,
1143: daisy, km, mir, msgr, xhpa, xt,
1144: colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1145: acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1146: bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1147: cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1148: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1149: dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1150: il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1151: kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1152: kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1153: kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1154: kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1155: kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1156: kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1157: kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1158: kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1159: kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1160: kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1161: kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1162: kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1163: kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1164: ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1165: kext=\377\270, kf1=\377\201, kf10=\377\212,
1166: kf11=\377\256, kf12=\377\257, kf13=\377\213,
1167: kf14=\377\214, kf15=\377\215, kf16=\377\216,
1168: kf17=\377\217, kf18=\377\220, kf19=\377\221,
1169: kf2=\377\202, kf20=\377\222, kf21=\377\223,
1170: kf22=\377\224, kf23=\377\333, kf24=\377\334,
1171: kf25=\377\225, kf26=\377\226, kf27=\377\227,
1172: kf28=\377\230, kf29=\377\231, kf3=\377\203,
1173: kf30=\377\232, kf31=\377\233, kf32=\377\234,
1174: kf33=\377\235, kf34=\377\236, kf35=\377\276,
1175: kf36=\377\277, kf37=\377\321, kf38=\377\322,
1176: kf39=\377\323, kf4=\377\204, kf40=\377\324,
1177: kf41=\377\325, kf42=\377\326, kf43=\377\327,
1178: kf44=\377\330, kf45=\377\331, kf46=\377\332,
1179: kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1180: kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1181: khlp=\377\350, khome=\377\240, khts=\377\342,
1182: kich1=\377\253, kil1=\377\273, kind=\377\261,
1183: kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1184: knp=\377\252, knxt=\377\312, kopn=\377\357,
1185: kopt=\377\353, kpp=\377\242, kprt=\377\255,
1186: kprv=\377\302, krdo=\377\336, kref=\377\354,
1187: kres=\377\360, krfr=\377\347, kri=\377\271,
1188: krmir=\377\313, krpl=\377\362, krst=\377\352,
1189: ksav=\377\361, kslt=\377\247, kspd=\377\335,
1190: ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1191: rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1192: rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1193: setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1194: smso=\E(, smul=\E[,
1195:
1196: # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1197: # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1198: # (TD: derive from original qnx4 entry)
1199: qnxt2|qnx 2.15 serial terminal,
1200: am,
1201: civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1202: rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<,
1203: use=qnx4,
1204:
1205: #### NetBSD consoles
1206: #
1207: # pcvt termcap database entries (corresponding to release 3.31)
1208: # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1209: #
1210: # (For the terminfo master file, I translated these into terminfo syntax.
1211: # Then I dropped all the pseudo-HP entries. we don't want and can't use
1212: # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1213: # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1214:
1215: # NOTE: <ich1> has been taken out of this entry. for reference, it should
1216: # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1217: # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1218: pcvtXX|pcvt vt200 emulator (DEC VT220),
1219: am, km, mir, msgr, xenl,
1220: it#8, vt#3,
1221: acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1222: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1223: clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1224: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1225: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1226: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1227: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1228: el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1229: il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1230: is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1231: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1232: kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1233: kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1234: khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1235: nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1236: ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1237: rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1238: rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1239: sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1240: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1241:
1242: # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1243: # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1244: # 50 lines entries; 80 columns
1245: pcvt25|dec vt220 emulation with 25 lines,
1246: cols#80, lines#25,
1247: is2=\E[1;25r\E[25;1H, use=pcvtXX,
1248: pcvt28|dec vt220 emulation with 28 lines,
1249: cols#80, lines#28,
1250: is2=\E[1;28r\E[28;1H, use=pcvtXX,
1251: pcvt35|dec vt220 emulation with 35 lines,
1252: cols#80, lines#35,
1253: is2=\E[1;35r\E[35;1H, use=pcvtXX,
1254: pcvt40|dec vt220 emulation with 40 lines,
1255: cols#80, lines#40,
1256: is2=\E[1;40r\E[40;1H, use=pcvtXX,
1257: pcvt43|dec vt220 emulation with 43 lines,
1258: cols#80, lines#43,
1259: is2=\E[1;43r\E[43;1H, use=pcvtXX,
1260: pcvt50|dec vt220 emulation with 50 lines,
1261: cols#80, lines#50,
1262: is2=\E[1;50r\E[50;1H, use=pcvtXX,
1263:
1264: # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1265: # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1266: # 50 lines entries; 132 columns
1267: pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1268: cols#132, lines#25,
1269: is2=\E[1;25r\E[25;1H, use=pcvtXX,
1270: pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1271: cols#132, lines#28,
1272: is2=\E[1;28r\E[28;1H, use=pcvtXX,
1273: pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1274: cols#132, lines#35,
1275: is2=\E[1;35r\E[35;1H, use=pcvtXX,
1276: pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1277: cols#132, lines#40,
1278: is2=\E[1;40r\E[40;1H, use=pcvtXX,
1279: pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1280: cols#132, lines#43,
1281: is2=\E[1;43r\E[43;1H, use=pcvtXX,
1282: pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1283: cols#132, lines#50,
1284: is2=\E[1;50r\E[50;1H, use=pcvtXX,
1285:
1286: # Terminfo entries to enable the use of the ncurses library in colour on a
1287: # NetBSD-arm32 console (only tested on a RiscPC).
1288: # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1289: # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1290: # typo in invis - TD
1291: arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1292: am, bce, msgr, xenl, xon,
1293: cols#80, it#8, lines#30,
1294: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1295: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1296: clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1297: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1298: cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1299: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1300: cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1301: enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1302: invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1303: kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1304: kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1305: kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1306: kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[6m$<2>, ri=\EM$<5>,
1307: rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1308: rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1309: sc=\E7,
1310: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
1311: sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1312: smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
1313: use=ecma+sgr, use=klone+color,
1314:
1315: arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1316: cols#132, lines#50, use=arm100,
1317:
1318: # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1319: # manufactured by Sharp for the Japenese market.
1320: # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1321: x68k|x68k-ite|NetBSD/x68k ITE,
1322: cols#96, lines#32,
1323: kclr=\E[9~, khlp=\E[28~, use=vt220,
1324:
1325: # <tv@pobox.com>:
1326: # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1327: #
1328: # (still unfinished, but good enough so far.)
1329: ofcons,
1330: bw,
1331: cols#80, lines#30,
1332: bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
1333: cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1334: cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1335: cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1336: dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1337: flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1338: il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1339: kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1340: kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1341: kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1342: kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1343: rmso=\2330m, rmul=\2330m, sgr0=\2330m,
1344:
1345: # NetBSD "wscons" emulator in vt220 mode
1346: # These are micro-minimal and probably need to be redone for real
1347: # after the manner of the pcvt entries.
1348: wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1349: cols#80, lines#25, use=vt220,
1350:
1351: wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1352: km,
1353: cols#80, lines#25, use=vt220,
1354:
1355: # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1356: # DECstation/pmax.
1357: rcons|BSD rasterconsole,
1358: use=sun-il,
1359: # Color version of above. Color currenly only provided by NetBSD.
1360: rcons-color|BSD rasterconsole with ANSI color,
1361: bce,
1362: colors#8, pairs#64,
1363: op=\E[m, setab=\E[4%dm, setaf=\E[3%dm, use=rcons,
1364:
1365: #### FreeBSD console entries
1366: #
1367: # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1368: # Andrey Chernov maintains the FreeBSD termcap distributions.
1.1 millert 1369: #
1370: # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1371: # or comment out the :cb: capability in the console entry.
1372: #
1373: # Alexander Lukyanov reports:
1374: # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1375: # Now el1 clears not only to the line beginning, but also a large chunk
1376: # of previous line. But there is another bug - ech does not work at all.
1377: #
1378:
1379: # for syscons
1380: # common entry without semigraphics
1381: # Bug: The <op> capability resets attributes.
1382: # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1383: # instance el1 does if the cursor is moved to the right margin first. Removed
1384: # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1385: #
1386: # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1387: # Note that this disables standout with color.
1388: cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1389: am, bce, bw, eo, msgr, npc,
1.11 millert 1390: colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1.1 millert 1391: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1.11 millert 1392: cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1393: cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1394: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1395: cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1396: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
1397: hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
1398: il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kb2=\E[E,
1399: kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1400: kcuu1=\E[A, kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V,
1401: kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
1402: kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1403: kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rev=\E[7m,
1404: ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs1=\E[x\E[m\Ec,
1405: setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
1406: smso=\E[7m, vpa=\E[%i%p1%dd,
1.1 millert 1407: cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1408: acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
1409: use=cons25w,
1410: cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1411: colors@, pairs@,
1412: bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25,
1413: cons30|ansi80x30|freebsd console (30-line ansi mode),
1414: lines#30, use=cons25,
1415: cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1416: lines#30, use=cons25-m,
1417: cons43|ansi80x43|freebsd console (43-line ansi mode),
1418: lines#43, use=cons25,
1419: cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
1420: lines#43, use=cons25-m,
1421: cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
1422: lines#50, use=cons25,
1423: cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
1424: lines#50, use=cons25-m,
1425: cons60|ansi80x60|freebsd console (60-line ansi mode),
1426: lines#60, use=cons25,
1427: cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
1428: lines#60, use=cons25-m,
1429: cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
1430: acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
1431: use=cons25w,
1432: cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
1433: colors@, pairs@,
1434: op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25r,
1435: cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
1436: lines#50, use=cons25r,
1437: cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
1438: lines#50, use=cons25r-m,
1439: cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
1440: lines#60, use=cons25r,
1441: cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
1442: lines#60, use=cons25r-m,
1443: # ISO 8859-1 FreeBSD console
1444: cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
1445: acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
1446: use=cons25w,
1447: cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
1448: colors@, pairs@,
1449: bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25l1,
1450: cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
1451: lines#50, use=cons25l1,
1452: cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
1453: lines#50, use=cons25l1-m,
1454: cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
1455: lines#60, use=cons25l1,
1456: cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
1457: lines#60, use=cons25l1-m,
1458:
1459: #### 386BSD and BSD/OS Consoles
1460: #
1461:
1462: # This was the original 386BSD console entry (I think).
1463: # Some places it's named oldpc3|oldibmpc3.
1464: # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
1465: origpc3|origibmpc3|IBM PC 386BSD Console,
1.11 millert 1466: OTbs, am, bw, eo, xon,
1.1 millert 1467: cols#80, lines#25,
1.11 millert 1468: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
1.1 millert 1469: bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1.11 millert 1470: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1471: home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1472: kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
1473: rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
1474: smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
1.1 millert 1475:
1476: # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
1477: oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
1.11 millert 1478: OTbs, km,
1.1 millert 1479: lines#25,
1.11 millert 1480: bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
1481: ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
1482: kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
1483: knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
1.1 millert 1484:
1485: # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
1486: # Note, the emulator supports many of the additional console features
1487: # listed in the iBCS2 (e.g. character-set selection) though not all
1488: # are described here. This entry really ought to be upgraded.
1489: # Also note, the console will also work with fewer lines after doing
1490: # "stty rows NN", e.g. to use 24 lines.
1491: # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
1492: # Bug: The <op> capability resets attributes.
1.11 millert 1493: bsdos-pc-nobold|BSD/OS PC console w/o bold,
1494: OTbs, am, eo, km, xon,
1495: cols#80, it#8, lines#25,
1496: bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
1497: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1498: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1499: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
1.1 millert 1500: il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1.11 millert 1501: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
1502: kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
1503: sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
1504: use=klone+sgr, use=klone+color,
1505: bsdos-pc|IBM PC BSD/OS Console,
1506: sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, use=bsdos-pc-nobold,
1507:
1508: # Old names for BSD/OS PC console used in releases before 4.1.
1509: pc3|BSD/OS on the PC Console,
1510: use=bsdos-pc-nobold,
1511: ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
1512: use=bsdos-pc,
1513:
1514: # BSD/OS on the SPARC
1515: bsdos-sparc|Sun SPARC BSD/OS Console,
1516: use=sun,
1517:
1518: # BSD/OS on the PowerPC
1519: bsdos-ppc|PowerPC BSD/OS Console,
1520: use=bsdos-pc,
1.1 millert 1521:
1.14 millert 1522: #### DEC VT52
1523: # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
1524: vt52|dec vt52,
1525: OTbs,
1526: cols#80, it#8, lines#24,
1527: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1528: bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
1529: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
1530: el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
1531: kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
1532:
1.1 millert 1533: #### DEC VT100 and compatibles
1534: #
1.14 millert 1535: # DEC terminals from the vt100 forward are collected here. Older DEC terminals
1536: # and micro consoles can be found in the `obsolete' section. More details on
1.1 millert 1537: # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
1538: # found near the end of this file.
1539: #
1540: # Except where noted, these entries are DEC's official terminfos.
1541: # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
1542: # Engineering for more information. Updated terminfos and termcaps
1543: # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
1544: #
1545: # In October 1995 DEC sold its terminals business, including the VT and Dorio
1546: # line and trademark, to SunRiver Data Systems. SunRiver has since changed
1547: # its name to Boundless Technologies; see http://www.boundless.com.
1548: #
1549:
1550: # NOTE: Any VT100 emulation, whether in hardware or software, almost
1551: # certainly includes what DEC called the `Level 1 editing extension' codes;
1552: # only the very oldest VT100s lacked these and there probably aren't any of
1553: # those left alive. To capture these, use one of the VT102 entries.
1554: #
1555: # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
1556: # since the cursor is left in a different position while in the
1557: # weird state (concept at beginning of next line, vt100 at end
1558: # of this line) so all versions of vi before 3.7 don't handle
1559: # <xenl> right on vt100. The correct way to handle <xenl> is when
1560: # you output the char in column 80, immediately output CR LF
1561: # and then assume you are in column 1 of the next line. If <xenl>
1562: # is on, am should be on too.
1563: #
1564: # I assume you have smooth scroll off or are at a slow enough baud
1565: # rate that it doesn't matter (1200? or less). Also this assumes
1566: # that you set auto-nl to "on", if you set it off use vt100-nam
1567: # below.
1568: #
1569: # The padding requirements listed here are guesses. It is strongly
1570: # recommended that xon/xoff be enabled, as this is assumed here.
1571: #
1572: # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
1573: # tab settings are in non-volatile memory and don't need to be
1574: # reset upon login. Also setting the number of columns glitches
1575: # the screen annoyingly. You can type "reset" to get them set.
1576: #
1.14 millert 1577: # The VT100 series terminals have cursor ("arrows") keys which can operate
1578: # in two different modes: Cursor Mode and Application Mode. Cursor Mode
1579: # is the reset state, and is assumed to be the normal state. Application
1580: # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
1581: # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
1582: # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
1583: # was provided primarily as an aid to the porting of VT52 applications. It is
1584: # assumed that the cursor keys are normally in Cursor Mode, and expected that
1585: # applications such as vi will always transmit the <smkx> string. Therefore,
1586: # the definitions for the cursor keys are made to match what the terminal
1587: # transmits after the <smkx> string is transmitted. If the <smkx> string
1588: # is a null string or is not defined, then cursor keys are assumed to be in
1589: # "Cursor Mode", and the cursor keys definitions should match that assumption,
1590: # else the application may fail. It is also expected that applications will
1591: # always transmit the <rmkx> string to the terminal before they exit.
1592: #
1593: # The VT100 series terminals have an auxiliary keypad, commonly referred to as
1594: # the "Numeric Keypad", because it is a cluster of numeric and function keys.
1595: # The Numeric Keypad which can operate in two different modes: Numeric Mode and
1596: # Application Mode. Numeric Mode is the reset state, and is assumed to be
1597: # the normal state. Application Mode is the "set" state. In Numeric Mode,
1598: # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
1599: # Enter key transmits the same as the Return key (Note: the Return key
1600: # can be configured to send either LF (\015) or CR LF). In Application Mode,
1601: # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
1602: # always send the same "Esc O {code}" sequences. It is assumed that the keypad
1603: # is normally in Numeric Mode. If an application requires that the keypad be
1604: # in Application Mode then it is expected that the user, or the application,
1605: # will set the TERM environment variable to point to a terminfo entry which has
1606: # defined the <smkx> string to include the codes that switch the keypad into
1607: # Application Mode, and the terminfo entry will also define function key
1608: # fields to match the Application Mode control codes. If the <smkx> string
1609: # is a null string or is not defined, then the keypad is assumed to be in
1610: # Numeric Mode. If the <smkx> string switches the keypad into Application
1611: # Mode, it is expected that the <rmkx> string will contain the control codes
1612: # necessary to reset the keypad to "Normal" mode, and it is also expected that
1613: # applications which transmit the <smkx> string will also always transmit the
1614: # <rmkx> string to the terminal before they exit.
1615: #
1.1 millert 1616: # Here's a diagram of the VT100 keypad keys with their bindings.
1617: # The top line is the name of the key (some DEC keyboards have the keys
1618: # labelled somewhat differently, like GOLD instead of PF1, but this is
1619: # the most "official" name). The second line is the escape sequence it
1620: # generates in Application Keypad mode (where "$" means the ESC
1621: # character). The third line contains two items, first the mapping of
1622: # the key in terminfo, and then in termcap.
1623: # _______________________________________
1624: # | PF1 | PF2 | PF3 | PF4 |
1625: # | $OP | $OQ | $OR | $OS |
1626: # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
1627: # | 7 8 9 - |
1628: # | $Ow | $Ox | $Oy | $Om |
1629: # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
1630: # | 4 | 5 | 6 | , |
1631: # | $Ot | $Ou | $Ov | $Ol |
1632: # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
1633: # | 1 | 2 | 3 | |
1634: # | $Oq | $Or | $Os | enter |
1635: # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
1636: # | 0 | . | |
1637: # | $Op | $On | |
1638: # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
1639: #
1640: # And here, for those of you with orphaned VT100s lacking documentation, is
1641: # a description of the soft switches invoked when you do `Set Up'.
1642: #
1643: # Scroll 0-Jump Shifted 3 0-#
1644: # | 1-Smooth | 1-British pound sign
1645: # | Autorepeat 0-Off | Wrap Around 0-Off
1646: # | | 1-On | | 1-On
1647: # | | Screen 0-Dark Bkg | | New Line 0-Off
1648: # | | | 1-Light Bkg | | | 1-On
1649: # | | | Cursor 0-Underline | | | Interlace 0-Off
1650: # | | | | 1-Block | | | | 1-On
1651: # | | | | | | | |
1652: # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
1653: # | | | | | | | |
1654: # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
1655: # | | | 1-On | | | 1-50 Hz
1656: # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
1657: # | | 1-ANSI | | 1-8 Bits
1658: # | Keyclick 0-Off | Parity 0-Off
1659: # | 1-On | 1-On
1660: # Margin Bell 0-Off Parity Sense 0-Odd
1661: # 1-On 1-Even
1662: #
1663: # The following SET-UP modes are assumed for normal operation:
1664: # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
1665: # WRAP_AROUND_ON JUMP_SCROLL_OFF
1666: # Other SET-UP modes may be set for operator convenience or communication
1667: # requirements; I recommend
1668: # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
1669: # Unless you have a graphics add-on such as Digital Engineering's VT640
1670: # (and even then, whenever it can be arranged!) you should set
1671: # INTERLACE_OFF
1672: #
1673: # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
1.11 millert 1674: vt100|vt100-am|dec vt100 (w/advanced video),
1.1 millert 1675: OTbs, am, msgr, xenl, xon,
1.11 millert 1676: cols#80, it#8, lines#24, vt#3,
1677: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1678: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1679: clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1680: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1681: cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1682: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1683: cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1684: enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, ka1=\EOq,
1685: ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD,
1686: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy,
1687: kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
1688: kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
1689: rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
1690: rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
1691: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1692: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
1693: sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1694: smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
1695: vt100nam|vt100-nam|vt100 no automargins,
1696: am@, xenl@, use=vt100-am,
1697: vt100-vb|dec vt100 (w/advanced video) & no beep,
1698: bel@, flash=\E[?5h\E[?5l, use=vt100,
1.1 millert 1699:
1700: # Ordinary vt100 in 132 column ("wide") mode.
1.11 millert 1701: vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
1702: cols#132, lines#24,
1703: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
1704: vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
1705: cols#132, lines#14, vt@,
1706: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
1.1 millert 1707:
1708: # vt100 with no advanced video.
1.11 millert 1709: vt100-nav|vt100 without advanced video option,
1710: xmc#1,
1711: blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
1712: smul@,
1713: use=vt100,
1714: vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
1715: cols#132, lines#14, use=vt100-nav,
1.1 millert 1716:
1717: # vt100 with one of the 24 lines used as a status line.
1718: # We put the status line on the top.
1.11 millert 1719: vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
1720: eslok, hs,
1721: lines#23,
1722: clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
1723: cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
1724: fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
1725: tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
1.1 millert 1726:
1727: # Status line at bottom.
1728: # Clearing the screen will clobber status line.
1.11 millert 1729: vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
1730: eslok, hs,
1731: lines#23,
1732: dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
1733: tsl=\E7\E[24;%p1%dH\E[1K,
1734: use=vt100-am,
1.1 millert 1735:
1736: # Most of the `vt100' emulators out there actually emulate a vt102
1737: # This entry (or vt102-nsgr) is probably the right thing to use for
1738: # these.
1.11 millert 1739: vt102|dec vt102,
1740: mir,
1741: dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, use=vt100,
1742: vt102-w|dec vt102 in wide mode,
1743: cols#132,
1744: rs3=\E[?3h, use=vt102,
1.1 millert 1745:
1746: # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
1747: # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
1748: # string in the canonical vt100 entry above leaves the screen littered
1749: # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
1750: # after highlight turnoffs. This entry should fix that, and even leave
1751: # ACS support working, at the cost of making multiple-highlight changes
1752: # slightly more expensive.
1753: # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
1.11 millert 1754: vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
1755: sgr@, sgr0=\E[m,
1756: use=vt102,
1.1 millert 1757:
1758: # VT125 Graphics CRT. Clear screen also erases graphics
1.11 millert 1759: vt125|vt125 graphics terminal,
1.1 millert 1760: clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
1761:
1762: # This isn't a DEC entry, it came from University of Wisconsin.
1763: # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
1764: vt131|dec vt131,
1765: OTbs, am, xenl,
1766: cols#80, it#8, lines#24, vt#3,
1767: bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
1.11 millert 1768: clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1769: cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
1770: cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
1771: ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
1772: is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
1773: kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
1774: kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
1775: rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
1776: rmul=\E[m$<2/>,
1.1 millert 1777: rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1.11 millert 1778: sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
1.1 millert 1779: smso=\E[7m$<2/>, smul=\E[4m$<2/>,
1780:
1781: # vt132 - like vt100 but slower and has ins/del line and such.
1782: # I'm told that <smir>/<rmir> are backwards in the terminal from the
1783: # manual and from the ANSI standard, this describes the actual
1784: # terminal. I've never actually used a vt132 myself, so this
1785: # is untested.
1786: #
1.11 millert 1787: vt132|DEC vt132,
1788: xenl,
1789: dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
1790: ip=$<7>, rmir=\E[4h, smir=\E[4l,
1791: use=vt100,
1.1 millert 1792:
1793: # This vt220 description maps F5--F9 to the second block of function keys
1794: # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
1795: # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
1796: # PF1--PF4 are used as F1--F4.
1797: #
1.18 millert 1798: vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
1.17 millert 1799: OTbs, OTpt, am, mir, xenl, xon,
1.11 millert 1800: cols#80, lines#24, vt#3,
1.19 ! millert 1801: OTnl=^J,
1.1 millert 1802: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.11 millert 1803: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
1804: clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
1805: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
1806: cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
1807: dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
1808: if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
1.15 millert 1809: is2=\E[1;24r\E[24;1H, kbs=\177, kcub1=\EOD, kcud1=\EOB,
1810: kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
1.11 millert 1811: kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1812: kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
1813: khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
1814: rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
1815: ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
1816: rmso=\E[27m, rmul=\E[24m,
1817: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1818: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
1819: sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
1820: smso=\E[7m, smul=\E[4m,
1.14 millert 1821:
1.18 millert 1822: # A much better description of the VT200/220; used to be vt220-8
1.19 ! millert 1823: # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
! 1824: # designation to accommodate bug in pcvt -TD
1.18 millert 1825: vt220|vt200|dec vt220,
1.17 millert 1826: OTbs, am, mc5i, mir, msgr, xenl, xon,
1.14 millert 1827: cols#80, it#8, lines#24, vt#3,
1828: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1829: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1830: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1831: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1832: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1833: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1834: ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
1835: flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
1836: ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
1837: il=\E[%p1%dL, il1=\E[L, ind=\ED,
1.15 millert 1838: is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=\177, kcub1=\EOD,
1839: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~,
1.14 millert 1840: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1841: kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
1842: kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
1843: kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
1844: khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~,
1845: kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i,
1846: mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
1.19 ! millert 1847: rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
! 1848: rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=\E(0$<2>,
1.14 millert 1849: smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1.11 millert 1850: vt220-w|vt200-w|DEC vt220 in wide mode,
1851: cols#132,
1852: rs3=\E[?3h, use=vt220,
1.14 millert 1853: vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
1.18 millert 1854: OTbs, am, mc5i, mir, msgr, xenl, xon,
1.14 millert 1855: cols#80, it#8, lines#24, vt#3,
1856: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1857: bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
1858: csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
1859: cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
1860: cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
1861: dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
1862: ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
1863: flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
1864: ich=\233%p1%d@, if=/usr/share/tabset/vt100,
1865: il=\233%p1%dL, il1=\233L, ind=\ED,
1.15 millert 1866: is2=\233?7h\233>\233?1h\E F\233?4l, kbs=\177,
1.14 millert 1867: kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
1868: kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
1869: kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
1870: kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
1871: kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
1872: kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
1873: knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
1874: lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
1875: nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l,
1876: rmir=\2334l, rmso=\23327m, rmul=\23324m, rs1=\233?3l,
1877: sc=\E7, sgr0=\233m, smacs=^N, smam=\233?7h, smir=\2334h,
1878: smso=\2337m, smul=\2334m, tbc=\2333g,
1.1 millert 1879:
1880: #
1881: # vt220d:
1882: # This vt220 description regards F6--F10 as the second block of function keys
1883: # at the top of the keyboard. This mapping follows the description given
1884: # in the VT220 Programmer Reference Manual and agrees with the labeling
1885: # on some terminals that emulate the vt220. There is no support for an F5.
1886: # See vt220 for an alternate mapping.
1887: #
1.11 millert 1888: vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
1889: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1890: kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1891: kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
1892: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1.14 millert 1893: use=vt220-old,
1.11 millert 1894:
1895: vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
1896: am@,
1897: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
1.1 millert 1898:
1899: # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
1900: # (not an official DEC entry!)
1901: # The problem with real vt220 terminals is they don't send escapes when in
1902: # in vt220 mode. This can be gotten around two ways. 1> don't send
1903: # escapes or 2> put the vt220 into vt100 mode and use all the nifty
1904: # features of vt100 advanced video which it then has.
1905: #
1906: # This entry takes the view of putting a vt220 into vt100 mode so
1907: # you can use the escape key in emacs and everything else which needs it.
1908: #
1909: # You probably don't want to use this on a VMS machine since VMS will think
1910: # it has a vt220 and will get fouled up coming out of emacs
1911: #
1912: # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
1.14 millert 1913: # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
1.1 millert 1914: vt200-js|vt220-js|dec vt200 series with jump scroll,
1915: am,
1916: cols#80,
1.11 millert 1917: bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1918: cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
1919: dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
1.1 millert 1920: il1=\E[L, ind=\ED,
1921: is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
1.15 millert 1922: kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1.14 millert 1923: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
1.11 millert 1924: rf=/usr/lib/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
1925: rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
1.14 millert 1926: rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
1.11 millert 1927: smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
1.1 millert 1928:
1929: # This was DEC's vt320. Use the purpose-built one below instead
1930: #vt320|DEC VT320 in vt100 emulation mode,
1931: # use=vt220,
1932:
1933: #
1934: # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
1935: #
1.11 millert 1936: vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
1937: am@,
1938: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
1.1 millert 1939:
1940: # These entries are not DEC's official ones, they were purpose-built for the
1941: # VT320. Here are the designer's notes:
1942: # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
1943: # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
1944: # khome is Home on a PC kbd. Actually 'FIND' on a VT.
1945: # Things that use <knxt> usually use tab anyways... and things that don't use
1946: # tab usually use <knxt> instead...
1947: # kprv is same as tab - Backtab is useless...
1948: # I left out <sgr> because of its RIDICULOUS complexity,
1949: # and the resulting fact that it causes the termcap translation of the entry
1950: # to SMASH the 1k-barrier...
1.14 millert 1951: # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
1.1 millert 1952: # (vt320: uncommented <fsl> --esr)
1.11 millert 1953: vt320|vt300|dec vt320 7 bit terminal,
1954: am, eslok, hs, mir, msgr, xenl,
1955: cols#80, lines#24, wsl#80,
1956: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1957: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1958: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
1959: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1960: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1961: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1962: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1963: ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
1964: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
1965: il1=\E[L, ind=\ED,
1966: is2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1967: ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=\177, kc1=\EOq, kc3=\EOs,
1968: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1969: kdch1=\E[3~, kel=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
1970: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1971: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1972: kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
1973: kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1974: khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, kpp=\E[5~,
1975: kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
1976: nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300,
1977: ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1978: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1979: rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1980: sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1981: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1982: tsl=\E[1$}\E[H\E[K,
1983: vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
1984: am@,
1985: is2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
1986: rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
1987: use=vt320,
1.1 millert 1988: # We have to init 132-col mode, not 80-col mode.
1.11 millert 1989: vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
1990: cols#132, wsl#132,
1991: is2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1992: rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1993: use=vt320,
1994: vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
1995: am@,
1996: is2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
1997: rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
1998: use=vt320-w,
1.1 millert 1999:
2000: # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2001: # which are pretty much a superset of the VT320. They have the
2002: # host writable status line, yet another different DRCS matrix size,
2003: # and such, but they add the DEC Technical character set, Multiple text
2004: # pages, selectable length pages, and the like. The difference between
2005: # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2006: # monitor, the former has 4 planes and a color monitor. These terminals
2007: # support VT131 and ANSI block mode, but as with much of these things,
2008: # termcap/terminfo doesn't deal with these features.
2009: #
2010: # Note that this entry is are set up in what was the standard way for GNU
2011: # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2012: # keys were switched into application mode at the same time the numeric pad
2013: # is switched into application mode. This changes the definitions of the
2014: # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2015: # your termcap or terminfo entry,
2016: #
2017: # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2018: # (vt340: string capability "sb=\E[M" corrected to "sr";
2019: # also, added <rmam>/<smam> based on the init string -- esr)
2020: vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2021: am, eslok, hs, mir, msgr, xenl, xon,
2022: cols#80, it#8, lines#24, vt#3,
1.11 millert 2023: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2024: blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2025: cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2026: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2027: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2028: cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dch=\E[%p1%dP,
2029: dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1.1 millert 2030: dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
1.11 millert 2031: flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, ht=^I,
2032: hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1.1 millert 2033: is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1.15 millert 2034: kbs==177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1.11 millert 2035: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2036: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2037: lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2038: rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O,
2039: rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2040: rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
2041: smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
2042: smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
1.1 millert 2043:
2044: # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2045: # (originally written with vt420 as its primary name, and usable for it).
2046: #
2047: # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2048: # text pages and long text pages with selectable length of the vt340, along
2049: # with left and right margins, rectangular area text copy, fill, and erase
2050: # operations, selected region character attribute change operations,
2051: # page memory and rectangle checksums, insert/delete column, reception
2052: # macros, and other features too numerous to remember right now. TERMCAP
2053: # can only take advantage of a few of these added features.
2054: #
2055: # Note that this entry is are set up in what was the standard way for GNU
2056: # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2057: # keys were switched into application mode at the same time the numeric pad
2058: # is switched into application mode. This changes the definitions of the
2059: # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2060: # your termcap entry,
2061: #
2062: # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2063: # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2064: # also, added <rmam>/<smam> based on the init string -- esr)
2065: vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2066: am, eslok, hs, mir, msgr, xenl, xon,
2067: cols#80, it#8, lines#24, vt#3,
1.11 millert 2068: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.1 millert 2069: blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2070: clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2071: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2072: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2073: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.11 millert 2074: cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2075: dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
1.1 millert 2076: el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
1.11 millert 2077: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2078: il=\E[%p1%dL, il1=\E[L, ind=\ED,
1.1 millert 2079: is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1.15 millert 2080: kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1.11 millert 2081: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2082: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2083: lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2084: rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O,
2085: rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2086: rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, sgr0=\E[m,
2087: smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
2088: smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1.1 millert 2089: tsl=\E[2$~\E[1$}\E[1;%dH,
2090:
2091: # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2092: # a missing <sc> -- esr)
1.11 millert 2093: vt420|DEC VT420,
2094: am, mir, xenl, xon,
2095: cols#80, lines#24, vt#3,
2096: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2097: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2098: clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2099: cub1=^H, cud1=\E[B, cuf1=\E[C,
2100: cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2101: dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2102: if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
1.15 millert 2103: is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177,
1.11 millert 2104: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2105: kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2106: kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2107: kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2108: kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
2109: rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
2110: rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2111: rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2112: rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2113: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
2114: sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2115: smkx=\E=, smso=\E[7m, smul=\E[4m,
1.1 millert 2116:
2117: #
2118: # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2119: # takes two parameters, the key and the string. Translating the key is
2120: # straightforward (keys 1-5 are not defined on real terminals, though some
2121: # emulators define these):
2122: #
2123: # if (key < 16) then value = key;
2124: # else if (key < 21) then value = key + 1;
2125: # else if (key < 25) then value = key + 2;
2126: # else if (key < 27) then value = key + 3;
2127: # else if (key < 30) then value = key + 4;
2128: # else value = key + 5;
2129: #
2130: # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2131: # There's no provision in terminfo for emitting a string in this format, so the
2132: # application has to know it.
2133: #
1.11 millert 2134: vt420pc|DEC VT420 w/PC keyboard,
2135: kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2136: kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2137: kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2138: kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2139: kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2140: kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2141: kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2142: kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2143: kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2144: kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2145: kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2146: kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2147: kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2148: kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2149: pctrm=USR_TERM\:vt420pcdos\:,
2150: pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, use=vt420,
2151:
2152: vt420pcdos|DEC VT420 w/PC for DOS Merge,
2153: lines#25,
2154: dispc=%?%p2%{19}%=%t\E\023\021%e%p2%{32}%<%t\E%p2%c%e%p2%{127}%=%t\E\177%e%p2%c%;,
2155: pctrm@,
2156: rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2157: sgr0=\E[m, smsc=\E[?1;2r\E[34h,
2158: use=vt420pc,
2159:
2160: vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2161: kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2162: kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2163: kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2164: kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2165: kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2166: khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2167: use=vt420,
2168:
2169: vt510|DEC VT510,
2170: use=vt420,
2171: vt510pc|DEC VT510 w/PC keyboard,
2172: use=vt420pc,
2173: vt510pcdos|DEC VT510 w/PC for DOS Merge,
2174: use=vt420pcdos,
1.1 millert 2175:
2176: # VT520/VT525
2177: #
2178: # The VT520 is a monochrome text terminal capable of managing up to
2179: # four independent sessions in the terminal. It has multiple ANSI
2180: # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2181: # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2182: # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2183: #
2184: # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2185: # [Alt]/[Print Screen] depending upon which keyboard and which
2186: # terminal mode is being used. If Set-Up has been disabled or
2187: # assigned to an unknown key, Set-Up may be entered by pressing
2188: # [F3] as the first key after power up, regardless of keyboard type.
2189: # (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
1.11 millert 2190: vt520|DEC VT520,
2191: am, mir, xenl, xon,
2192: cols#80, lines#24, vt#3,
2193: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2194: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2195: clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2196: cub1=^H, cud1=\E[B, cuf1=\E[C,
2197: cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2198: dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2199: if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
1.15 millert 2200: is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177,
1.11 millert 2201: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1.13 millert 2202: kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2203: kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2204: kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2205: kslt=\E[4~,
1.11 millert 2206: pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2207: rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2208: ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2209: rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2210: rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2211: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
2212: sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2213: smso=\E[7m, smul=\E[4m,
1.1 millert 2214:
2215: # (vt525: I added <rmam>/<smam> based on the init string;
2216: # removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
1.11 millert 2217: vt525|DEC VT525,
2218: am, mir, xenl, xon,
2219: cols#80, lines#24, vt#3,
2220: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2221: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2222: clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2223: cub1=^H, cud1=\E[B, cuf1=\E[C,
2224: cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2225: dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2226: if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
1.15 millert 2227: is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177,
1.11 millert 2228: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1.13 millert 2229: kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2230: kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2231: kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2232: kslt=\E[4~,
1.11 millert 2233: pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2234: rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2235: ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2236: rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2237: rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2238: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
2239: sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2240: smso=\E[7m, smul=\E[4m,
1.1 millert 2241:
2242: #### VT100 emulations
2243: #
2244:
2245: # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2246: # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2247: # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2248: # that this works best with a stock vt100 entry.
1.11 millert 2249: dec-vt100|EWAN telnet's vt100 emulation,
2250: use=vt100,
1.1 millert 2251:
2252: # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
1.11 millert 2253: dec-vt220|DOS tnvt200 terminal emulator,
2254: am@, use=vt220,
1.1 millert 2255:
2256: # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2257: # anyone who needs PC VT340 emulation. (or anything below that level, for
2258: # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2259: # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2260: # I can send the address if requested.
2261: # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
1.14 millert 2262: # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
1.11 millert 2263: z340|zstem vt340 terminal emulator 132col 42line,
2264: lines#42,
2265: is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2266: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2267: use=vt320-w,
2268: z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2269: am@,
2270: is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2271: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2272: use=z340,
2273:
2274: # CRT is shareware. It implements some xterm features, including mouse.
2275: crt|crt-vt220|CRT 2.3 emulating VT220,
2276: bce, msgr,
2277: colors#8, pairs#64,
2278: hts=\EH, op=\E[39;49m, setab=\E[4%p1%dm,
2279: setaf=\E[3%p1%dm, setb=\E[4%p1%dm, setf=\E[3%p1%dm,
2280: u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
2281: use=vt220,
2282:
2283: # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
2284: # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
2285: # (communication program) which supports:
2286: #
2287: # - Serial port connections.
2288: # - TCP/IP (telnet) connections.
2289: # - VT100 emulation, and selected VT200/300 emulation.
2290: # - TEK4010 emulation.
2291: # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
2292: # Quick-VAN).
2293: # - Scripts using the "Tera Term Language".
2294: # - Japanese and Russian character sets.
2295: #
2296: # The program does not come with terminfo or termcap entries. However, the
2297: # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
2298: # vt52 or doublesize character support; blinking is done with color). Besides
2299: # the HPA, VPA extensions it also implements CPL and CNL.
2300: #
2301: # All of the function keys can be remapped. This description shows the default
2302: # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
2303: # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
2304: # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
2305: # kfnd Insert
2306: # kslt Delete
2307: # kich1 Home
2308: # kdch1 PageUp
2309: # kpp End
2310: # knp PageDown
2311: #
2312: # ANSI colors are implemented, but cannot be combined with video attributes
2313: # except for reverse.
2314: #
2315: # No fonts are supplied with the program, so the acsc string is chosen to
2316: # correspond with the default Microsoft terminal font.
2317: #
2318: # Tera Term recognizes some xterm sequences, including those for setting and
2319: # retrieving the window title, and for setting the window size (i.e., using
2320: # "resize -s"), though it does not pass SIGWINCH to the application if the
2321: # user resizes the window with the mouse.
2322: teraterm|Tera Term Pro,
2323: km, xon@,
2324: ncv#43, vt@,
2325: acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2326: blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2327: cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2328: cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2329: dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2330: flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
2331: il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
2332: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2333: kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2334: kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
2335: kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2336: kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
2337: kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
2338: rmso=\E[27m, rmul=\E[24m, sgr0=\E[m, smso=\E[7m,
2339: smul=\E[4m, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
2340: vpa=\E[%i%p1%dd,
2341: use=klone+color, use=vt100,
2342:
2343: # Tested with WinNT 4.0, the telnet application assumes the screensize is
2344: # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
2345: ms-vt100|MS telnet imitating dec vt100,
2346: lines#25,
2347: acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2348: tbc@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\E[c,
2349: use=vt100,
1.1 millert 2350:
2351: #### X terminal emulators
2352: #
2353: # You can add the following line to your .Xdefaults to change the terminal type
2354: # set by the xterms you start up to my-xterm:
2355: #
2356: # *termName: my-xterm
2357: #
2358: # System administrators can change the default entry for xterm instances
2359: # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
2360: # case, xterm will detect and reject an invalid terminal type, falling back
2361: # to the default of xterm.
2362: #
2363:
2364: # X10/6.6 11/7/86, minus alternate screen, plus (csr)
2365: # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
2366: # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
2367: # as these seem not to work -- esr)
2368: x10term|vs100-x10|xterm terminal emulator (X10 window system),
2369: OTbs, am, km, mir, msgr, xenl, xon,
2370: cols#80, it#8, lines#65,
2371: bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
2372: cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2373: cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2374: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
2375: il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
2376: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
2377: kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2378: rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
2379: sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
2380: smso=\E[7m, smul=\E[4m,
2381: # Compatible with the R5 xterm
2382: # (from the XFree86 3.2 distribution, <blink=@> removed)
1.11 millert 2383: # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
2384: # corrected typos in rs2 string - TD
2385: # added u6-u9 -TD
1.1 millert 2386: xterm-r5|xterm R5 version,
2387: OTbs, am, km, msgr, xenl,
2388: cols#80, it#8, lines#24,
2389: bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2390: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2391: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2392: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2393: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2394: el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2395: il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
2396: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1.11 millert 2397: kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
2398: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
2399: kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2400: kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
2401: kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
2402: rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2403: rmul=\E[m,
2404: rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
2405: sc=\E7,
1.1 millert 2406: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
1.11 millert 2407: sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
2408: smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2409: u8=\E[?1;2c, u9=\E[c,
1.1 millert 2410: # Compatible with the R6 xterm
2411: # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
1.11 millert 2412: # added khome/kend, hts based on the R6 xterm code - TD
1.19 ! millert 2413: # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
! 2414: # for compatibility with other emulators).
1.1 millert 2415: xterm-r6|xterm-old|xterm X11R6 version,
2416: OTbs, am, km, mir, msgr, xenl,
2417: cols#80, it#8, lines#24,
1.11 millert 2418: acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.1 millert 2419: bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2420: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2421: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2422: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2423: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1.11 millert 2424: el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
1.1 millert 2425: il1=\E[L, ind=^J,
2426: is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^H,
2427: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1.16 millert 2428: kdch1=\E[3~, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
1.8 millert 2429: kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2430: kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1.11 millert 2431: kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2432: kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1.16 millert 2433: kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1.11 millert 2434: kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
2435: rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
2436: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1.9 millert 2437: rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7,
1.1 millert 2438: sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
2439: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1.11 millert 2440: u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
1.1 millert 2441: # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
2442: # The name has been changed and some aliases have been removed.
2443: xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
2444: OTbs, am, bce, km, mir, msgr, xenl,
2445: colors#8, cols#80, it#8, lines#24, pairs#64,
1.11 millert 2446: acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.1 millert 2447: bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2448: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2449: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2450: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2451: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.14 millert 2452: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2453: ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2454: flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
2455: ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
2456: il1=\E[L, ind=^J,
1.1 millert 2457: is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
2458: ka1=\EOw, ka3=\EOu, kb2=\EOy, kbeg=\EOE, kbs=^H, kc1=\EOq,
2459: kc3=\EOs, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2460: kdch1=\177, kend=\EOF, kent=\EOM, kf1=\E[11~, kf10=\E[21~,
2461: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2462: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2463: kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
2464: kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2465: kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
2466: kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
2467: memu=\Em, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
2468: rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
2469: rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=^O,
2470: rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7,
2471: setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2472: setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2473: setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2474: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2475: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
2476: smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
1.11 millert 2477: tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
2478: vpa=\E[%i%p1%dd,
1.1 millert 2479:
2480: # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
2481: # codes for F1-F4 except while in VT220 mode.
2482: xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
2483: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2484: use=xterm-xf86-v32,
2485:
1.11 millert 2486: # This version was released in XFree86 3.3.3 (November 1998).
1.1 millert 2487: # Besides providing printer support, it exploits a new feature that allows
2488: # xterm to use terminfo-based descriptions with the titeInhibit resource.
1.14 millert 2489: # -- the distribution contained incorrect khome/kend values -TD
1.11 millert 2490: xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
1.1 millert 2491: mc5i,
1.11 millert 2492: blink=\E[5m, ich1@, invis=\E[8m,
1.14 millert 2493: is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
2494: mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
2495: rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
1.11 millert 2496: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
2497: smcup=\E[?1048h\E[?1047h,
1.1 millert 2498: use=xterm-xf86-v33,
2499:
1.11 millert 2500: # This beta version will probably be released in XFree86 4.0.
2501: xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
1.14 millert 2502: npc,
1.11 millert 2503: kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
2504: kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
1.13 millert 2505: ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
2506: kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
2507: kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
2508: kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
2509: kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
2510: kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
2511: kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
2512: kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
2513: kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
2514: kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
2515: kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
2516: kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
1.14 millert 2517: sgr=\E[0%?%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
1.13 millert 2518: smcup=\E[?1049h,
1.11 millert 2519: use=xterm-xf86-v333,
2520:
2521: xterm-xfree86|xterm-new|xterm terminal emulator (XFree86 4.0 Window System),
2522: use=xterm-xf86-v40,
2523:
1.1 millert 2524: # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
1.11 millert 2525: xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
2526: rmso=\E[m, rmul=\E[m,
1.1 millert 2527: use=xterm-xf86-v33,
2528:
1.11 millert 2529: # This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
1.1 millert 2530: xterm-16color|xterm with 16 colors like aixterm,
2531: colors#16, ncv#32, pairs#256,
1.11 millert 2532: setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
2533: setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
1.1 millert 2534: setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
2535: setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
2536: use=xterm-xf86-v40,
2537:
1.11 millert 2538: # These variants of XFree86 3.9.16 xterm are built as a configure option.
2539: xterm-256color|xterm with 256 colors,
2540: ccc,
2541: colors#256, ncv#32, pairs#256,
2542: initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
2543: setab=\E[48;5;%p1%dm, setaf=\E[38;5;%p1%dm,
2544: setb=\E[48;5;%p1%dm, setf=\E[38;5;%p1%dm,
2545: use=xterm-xfree86,
2546: xterm-88color|xterm with 88 colors,
2547: colors#88, pairs#88, use=xterm-256color,
2548:
1.1 millert 2549: # This is another variant, for XFree86 4.0 xterm (T.Dickey)
2550: # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
2551: # To use it, your decTerminalID resource must be set to 200 or above.
2552: #
2553: # HTS \E H \210
2554: # RI \E M \215
2555: # SS3 \E O \217
2556: # CSI \E [ \233
2557: #
2558: xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
1.14 millert 2559: OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl,
1.1 millert 2560: colors#8, cols#80, it#8, lines#24, pairs#64,
1.11 millert 2561: acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2562: bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
2563: civis=\233?25l, clear=\233H\2332J, cnorm=\233?25h, cr=^M,
1.1 millert 2564: csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2565: cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2566: cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
1.14 millert 2567: dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2568: ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
2569: enacs=\E(B\E)0, flash=\233?5h$<100/>\233?5l,
2570: home=\233H, hpa=\233%i%p1%dG, ht=^I, hts=\210,
2571: ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, ind=^J,
2572: invis=\2338m,
1.1 millert 2573: is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
2574: ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
2575: kc1=\217q, kc3=\217s, kcub1=\217D, kcud1=\217B,
1.11 millert 2576: kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
1.1 millert 2577: kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
2578: kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
2579: kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
2580: kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
2581: kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
1.11 millert 2582: kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
2583: knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
2584: meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
2585: ri=\215, rmacs=^O, rmam=\233?7l, rmcup=\233?1049l,
2586: rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
2587: rs1=\Ec,
1.1 millert 2588: rs2=\E7\E[62"p\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
2589: sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
2590: setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2591: setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1.11 millert 2592: sgr=\2330%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
2593: sgr0=\233m^O, smacs=^N, smam=\233?7h, smcup=\233?1049h,
1.1 millert 2594: smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m,
1.11 millert 2595: tbc=\2333g, u6=\233[%i%d;%dR, u7=\E[6n, u8=\233[?1;2c,
2596: u9=\E[c, vpa=\233%i%p1%dd,
2597:
2598: xterm-hp|XFree86 xterm with hpterm function keys,
2599: kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
2600: kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
2601: kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
2602: knp=\ES, kpp=\ET,
2603: use=xterm-xfree86,
2604:
2605: xterm-vt220|XFree86 xterm emulating vt220,
2606: ka1=\EOw, ka3=\EOy, kbeg=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs,
2607: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2608: kdch1=\E[3~, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
2609: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2610: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2611: kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
2612: kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2613: khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2614: use=xterm-xfree86,
2615:
2616: xterm-vt52|XFree86 xterm emulating dec vt52,
2617: cols#80, it#8, lines#24,
2618: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2619: bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
2620: cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
2621: home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2622: kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2623:
2624: xterm-noapp|xterm with cursor keys in normal mode,
2625: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rmcup@,
2626: rmkx=\E>, smcup@, smkx=\E=,
2627: use=xterm,
2628:
2629: xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
2630: lines#24, use=xterm-r6,
1.1 millert 2631:
1.11 millert 2632: # This is xterm for ncurses.
2633: xterm|xterm terminal emulator (X Window System),
1.1 millert 2634: use=xterm-r6,
1.11 millert 2635: # use=xterm-xfree86,
1.1 millert 2636:
2637: # These entries allow access to the X titlebar and icon name as a status line.
2638: # Note that twm (and possibly window managers descended from it such as tvtwm,
2639: # ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
2640: # with it.
2641: xterm+sl|access X title line and icon name,
2642: hs,
2643: wsl#40,
1.11 millert 2644: dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
1.1 millert 2645: xterm+sl-twm|access X title line (pacify twm-descended window managers),
2646: hs,
2647: wsl#40,
1.11 millert 2648: dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
1.1 millert 2649:
2650: #
2651: # The following xterm variants don't depend on your base version
2652: #
1.11 millert 2653: # xterm with bold instead of underline
1.1 millert 2654: xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
1.11 millert 2655: smso=\E[7m, smul=\E[1m,
1.1 millert 2656: use=xterm,
2657: # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
2658: # (kterm should not invoke DEC Graphics as the alternate character set
2659: # -- Kenji Rikitake)
2660: kterm|kterm kanji terminal emulator (X window system),
2661: eslok, hs,
2662: acsc@, csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs@, fsl=\E[?F,
2663: kmous=\E[M, op=\E[39;49m, rc=\E8, rmacs@, sc=\E7, smacs@,
2664: tsl=\E[?E\E[?%i%dT,
2665: use=xterm-r6, use=klone+color,
2666: # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
2667: xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
2668: ich@, ich1@,
2669: use=xterm,
2670: # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
2671: xterm1|xterm terminal emulator ignoring the alternate screen buffer,
2672: rmcup@, smcup@,
2673: use=xterm,
2674:
2675: # This describes the capabilities of color_xterm, an xterm variant from
2676: # before ECMA-64 color support was folded into the main-line xterm release.
2677: # This entry is straight from color_xterm's maintainer.
2678: # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
2679: # The README's with the distribution also say that it supports SGR 21, 24, 25
2680: # and 27, but they are not present in the terminfo or termcap.
2681: color_xterm|cx|cx100|color_xterm color terminal emulator for X,
2682: OTbs, am, km, mir, msgr, xenl,
2683: colors#8, cols#80, it#8, lines#65, pairs#64,
2684: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2685: bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2686: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2687: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2688: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2689: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2690: el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
2691: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
2692: is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, ka1=\EOw, ka3=\EOy,
2693: kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\EOD, kcud1=\EOB,
2694: kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kent=\EOM, kf1=\E[11~,
2695: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
2696: kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2697: kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
2698: kmous=\E[M, knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8,
2699: rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
2700: rmcup=\E>\E[?41;1r, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
2701: rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
2702: sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2703: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2704: sgr0=\E[m, smacs=^N, smam=\E[?7h,
2705: smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
2706: smul=\E[4m,
2707:
1.11 millert 2708: # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
1.1 millert 2709: # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
2710: # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
2711: # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
2712: # that each of those implements the home, end, delete keys differently.
1.11 millert 2713: #
2714: # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
2715: # colors; note that this is not compatible with the 5.2 version.
2716: nxterm|xterm-color|generic color xterm,
2717: ncv@,
2718: op=\E[m, use=xterm-r6, use=klone+color,
2719:
2720: # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
2721: gnome|Gnome terminal,
2722: bce,
2723: kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-color,
2724:
2725: # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
2726: # or not is debatable).
2727: kvt|KDE terminal,
2728: bce, km@,
2729: kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
1.1 millert 2730:
2731: # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
2732: # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
2733: # Notes:
2734: # rxvt 2.21b uses
2735: # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
2736: # but some applications don't work with that.
2737: # It also has an AIX extension
2738: # box2=lqkxjmwuvtn,
2739: # and
2740: # ech=\E[%p1%dX,
2741: # but the latter does not work correctly.
2742: #
1.11 millert 2743: # The distributed terminfo says it implements hpa and vpa, but they are not
2744: # implemented correctly, using relative rather than absolute positioning.
2745: #
1.1 millert 2746: # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
2747: # Since rxvt is not really compatible with xterm, it should be configured as
2748: # "rxvt" (monochrome) and "rxvt-color".
2749: rxvt-basic|rxvt terminal base (X Window System),
1.19 ! millert 2750: OTbs, am, bce, eo, km, mir, msgr, xenl, xon,
1.1 millert 2751: cols#80, it#8, lines#24,
2752: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2753: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2754: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2755: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2756: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2757: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.14 millert 2758: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2759: el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l,
2760: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2761: il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l,
1.1 millert 2762: is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
2763: kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$,
2764: kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H,
2765: kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
2766: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
1.13 millert 2767: kend=\E[8~, kent=\EOM, kf1=\E[11~, kf10=\E[21~,
1.1 millert 2768: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2769: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2770: kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
2771: kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2772: kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~,
2773: kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8,
1.11 millert 2774: rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8,
2775: rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
1.1 millert 2776: rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
2777: rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
2778: s0ds=\E(B, s1ds=\E(0, sc=\E7, sgr0=\E[0m\017, smacs=^N,
2779: smcup=\E7\E[?47h, smir=\E[4h, smkx=\E=, smso=\E[7m,
2780: smul=\E[4m, tbc=\E[3g,
2781: rxvt|rxvt terminal emulator (X Window System),
2782: colors#8, pairs#64,
2783: op=\E[39;49m, setab=\E[%p1%{40}%+%dm,
2784: setaf=\E[%p1%{30}%+%dm, sgr0=\E[m\017, use=rxvt-basic,
2785:
1.11 millert 2786: # These (xtermc and xtermm) are distributed with Solaris. They refer to a
2787: # variant of xterm which is apparently no longer supported, but are interesting
2788: # because they illustrate SVr4 curses mouse controls - T.Dickey
2789: xtermm|xterm terminal emulator (monocrome),
1.19 ! millert 2790: OTbs, am, km, mir, msgr, xenl,
1.11 millert 2791: btns#3, cols#80, it#8, lines#24,
2792: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2793: bel=^G, blink=@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2794: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
2795: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2796: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2797: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2798: el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
2799: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2800: il=\E[%p1%dL, il1=\E[L, ind=^J, ka1=\EOq, ka3=\EOs, kb2=\EOr,
2801: kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
2802: kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kent=\EOM, kf0=\EOy,
2803: kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ,
2804: kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2805: kf9=\EOX, khome=\E[H, kmous=\E[^_, knp=\E[U, kpp=\E[V,
2806: rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, rmacs=^O,
2807: rmcup=\E@0\E[?4r, rmso=\E[m,
2808: rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
2809: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2810: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2811: sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
2812: smso=\E[7m, tbc=\E[3g,
2813:
2814: xtermc|xterm terminal emulator (color),
2815: colors#8, ncv#7, pairs#64,
2816: op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2817: setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2818: setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2819: use=xtermm,
2820:
1.1 millert 2821: # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
2822: # Here's a termcap entry I've been using for xterm_color, which comes
2823: # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
2824: # color stuff, I also have a status line defined as the window manager
2825: # title bar. [I have translated it to terminfo -- ESR]
2826: xterm-pcolor|xterm with color used for highlights and status line,
2827: bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
2828: smul=\E[4m\E[42m,
2829: use=xterm+sl, use=xterm-r6,
2830:
2831: # HP ships this, except for the pb#9600 which was merged in from BSD termcap.
2832: # (hpterm: added empty <acsc>, we have no idea what ACS chars look like --esr)
2833: hpterm|X-hpterm|hp X11 terminal emulator,
2834: am, da, db, mir, xhp,
2835: cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
2836: acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
2837: cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
2838: cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
2839: hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
2840: kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
2841: kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
2842: kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
2843: khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
2844: knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
2845: memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
2846: pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
2847: pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
2848: pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
2849: rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
2850: rmul=\E&d@,
1.11 millert 2851: sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
1.1 millert 2852: sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
2853: smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
2854:
2855: # This entry describes an xterm with Sun-style function keys enabled
2856: # via the X resource setting "xterm*sunFunctionKeys:true"
2857: # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
2858: # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
2859: # because we want it to be seen as <kcpy>.
2860: # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
2861: # with their Sun keyboard labels instead.
2862: # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
2863: xterm-sun|xterm with sunFunctionKeys true,
2864: kb2=\E[218z, kcpy=\E[197z, kend=\E[220z, kf1=\E[224z,
2865: kf10=\E[233z, kf11=\E[192z, kf12=\E[193z, kf13=\E[194z,
2866: kf14=\E[195z, kf15=\E[196z, kf17=\E[198z, kf18=\E[199z,
2867: kf19=\E[200z, kf2=\E[225z, kf20=\E[201z, kf3=\E[226z,
2868: kf31=\E[208z, kf32=\E[209z, kf33=\E[210z, kf34=\E[211z,
2869: kf35=\E[212z, kf36=\E[213z, kf38=\E[215z, kf4=\E[227z,
2870: kf40=\E[217z, kf42=\E[219z, kf44=\E[221z, kf5=\E[228z,
2871: kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
2872: kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, kich1=\E[2z,
2873: knp=\E[222z, kpp=\E[216z, kund=\E[195z,
2874: use=xterm,
2875: xterms-sun|small (80x24) xterm with sunFunctionKeys true,
2876: cols#80, lines#24, use=xterm-sun,
2877:
2878: # This is for the extensible terminal emulator on the X11R6 contrib tape.
2879: emu|emu native mode,
2880: mir, msgr, xon,
2881: colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
2882: acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
2883: bel=^G, blink=\ES\EW, bold=\ES\EU, civis=\EZ,
2884: clear=\EP\EE0;0;, cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;,
2885: cub=\Eq-%p1%d;, cub1=^H, cud=\Ep%p1%d;, cud1=\EB,
2886: cuf=\Eq%p1%d;, cuf1=\ED, cup=\EE%p1%d;%p2%d;,
1.14 millert 2887: cuu=\Ep-%p1%d;, cuu1=\EA, dch=\EI%p1%d;, dch1=\EI1;,
2888: dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN, el=\EK,
2889: el1=\EL, enacs=\0, home=\EE0;0;, ht=^I, hts=\Eh,
1.1 millert 2890: il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, is2=\ES\Er0;\Es0;,
2891: kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, kcuu1=\EA,
2892: kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, kf10=\EF10,
2893: kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, kf15=\EF15,
2894: kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, kf2=\EF02,
2895: kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, kf6=\EF06,
2896: kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, kich1=\Eins,
2897: knp=\Enext, kpp=\Eprior, kslt=\Esel, oc=\Es0;\Er0;,
2898: rev=\ES\ET, ri=\EF, rmacs=\0, rmir=\EX, rmso=\ES, rmul=\ES,
1.11 millert 2899: rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
2900: setaf=\Er%i%p1%d;, sgr0=\ES, smacs=\0, smir=\EY,
2901: smso=\ES\ET, smul=\ES\EV, tbc=\Ej,
1.1 millert 2902:
1.11 millert 2903: #### MGR
2904: #
2905: # MGR is a Bell Labs window system lighter-weight than X.
2906: # These entries describe MGR's xterm-equivalent.
2907: # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
1.1 millert 2908: #
2909:
1.11 millert 2910: mgr|Bellcore MGR (non X) window system terminal emulation,
2911: am, km,
2912: bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
2913: csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
2914: cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
2915: dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
2916: dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
2917: ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
2918: il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2919: kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
2920: rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
2921: smul=\E4n,
2922: mgr-sun|Mgr window with Sun keyboard,
2923: ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
2924: kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
2925: kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
2926: kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
2927: kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
2928: kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
2929: kopn=\E[198z, kpp=\E[216z, kund=\E[195z,
2930: use=mgr,
2931: mgr-linux|Mgr window with Linux keyboard,
2932: ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
2933: kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
2934: kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
2935: kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2936: khome=\E[1~, knp=\E[6~, kpp=\E[5~,
2937: use=mgr,
2938:
2939: ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
1.1 millert 2940: #
2941:
1.11 millert 2942: # Columbus UNIX virtual terminal. This terminal also appears in
2943: # UNIX 4.0 and successors as line discipline 1 (?), but is
2944: # undocumented and does not really work quite right.
2945: cbunix|cb unix virtual terminal,
2946: OTbs, am, da, db,
2947: cols#80, lines#24, lm#0,
2948: bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
2949: cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
2950: el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
2951: kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
2952: smso=\Ea^D, smul=\Ea^A,
2953: # (vremote: removed obsolete ":nl@:" -- esr)
2954: vremote|virtual remote terminal,
2955: am@,
2956: cols#79, use=cbunix,
2957:
2958: pty|4bsd pseudo teletype,
2959: cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
2960: smso=\Ea$, smul=\Ea!,
2961: use=cbunix,
2962:
2963: # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
2964: eterm|gnu emacs term.el terminal emulation,
2965: am, mir, xenl,
2966: cols#80, lines#24,
2967: bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2968: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2969: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2970: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2971: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2972: el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
2973: il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
2974: rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
2975: sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
2976: smul=\E[4m,
1.1 millert 2977:
1.14 millert 2978: # Entries for use by the `screen' program by Juergen Weigert,
2979: # Michael Schroeder, Oliver Laumann. The screen and
1.11 millert 2980: # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
2981: # come from University of Wisconsin and may be older.
2982: # (screen: added <cnorm> on ANSI model -- esr)
1.1 millert 2983: #
1.11 millert 2984: # 'screen' defines extensions to termcap. Some are used in its terminal
2985: # description:
2986: # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
2987: # AX (bool) Does understand ANSI set default fg/bg color
2988: # (\E[39m / \E[49m).
2989: screen|VT 100/ANSI X3.64 virtual terminal,
2990: OTbs, OTpt, am, km, mir, msgr, xenl, AX, G0,
2991: colors#8, cols#80, it#8, lines#24, pairs#64,
2992: acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2993: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2994: clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
2995: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2996: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2997: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2998: cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2999: dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
3000: flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
3001: il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
3002: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\EOP,
3003: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR,
3004: kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3005: kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~,
3006: kpp=\E[5~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
3007: rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m,
3008: rs2=\Ec, sc=\E7, sgr0=\E[m, smacs=^N, smir=\E[4h,
3009: smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g,
3010: use=ecma+color,
3011:
3012: screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
3013: cols#132, use=screen,
1.1 millert 3014:
1.11 millert 3015: screen2|old VT 100/ANSI X3.64 virtual terminal,
3016: cols#80, it#8, lines#24,
3017: cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
1.1 millert 3018: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
3019: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.11 millert 3020: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3021: el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
3022: il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
3023: kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
3024: kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
3025: nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
3026: rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
3027: smso=\E[3m, smul=\E[4m, tbc=\E[3g,
3028: # (screen3: removed unknown ":xv:LP:G0:" -- esr)
3029: screen3|older VT 100/ANSI X3.64 virtual terminal,
3030: km, mir, msgr,
3031: cols#80, it#8, lines#24,
3032: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
3033: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3034: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3035: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3036: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3037: el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
3038: il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
3039: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
3040: kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
3041: rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
3042: sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
3043: smul=\E[4m, tbc=\E[3g,
1.1 millert 3044:
1.11 millert 3045: # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
3046: # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
3047: # been maintained until recently by the National Center for Supercomputer
3048: # Applications, and it is feature rich, stable and free. It can be downloaded
3049: # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
3050: # xterm+sl, and the docs at NCSA. It works well.
3051: #
3052: # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
3053: # The terminal options should be set as follows:
3054: # Xterm sequences ON
3055: # use VT wrap mode ON
3056: # use Emacs arrow keys OFF
3057: # CTRL-COMND is Emacs meta ON
3058: # 8 bit mode ON
3059: # answerback string: "ncsa-vt220-8"
3060: # setup keys: all disabled
3061: #
3062: # Application mode is not used.
1.1 millert 3063: #
1.11 millert 3064: # Other special mappings:
3065: # Apple VT220
3066: # HELP Find
3067: # HOME Insert here
3068: # PAGEUP Remove
3069: # DEL Select
3070: # END Prev Screen
3071: # PAGEDOWN Next Screen
3072: #
3073: # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
3074: # text.
3075: #
3076: # The status-line manipulation is a mapping of the xterm-compatible control
3077: # sequences for setting the window-title. So you must use tsl and fsl in
3078: # pairs, since the latter ends the string that is loaded to the window-title.
3079: ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
3080: am, hs, km, mir, msgr, xenl,
3081: acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3082: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3083: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3084: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3085: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3086: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3087: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3088: dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3089: flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
3090: ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3091: il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
3092: is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
3093: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3094: kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
3095: kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
3096: kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
3097: kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
3098: khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
3099: rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
3100: rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
3101: rmso=\E[27m, rmul=\E[24m,
3102: rs2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, sc=\E7,
3103: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3104: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7,
3105: smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
3106: u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?62;1;6c, u9=\E[c,
3107: ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
3108: use=ncsa-m, use=klone+color,
3109: ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
3110: hs@,
3111: dsl@, fsl@, tsl@, use=ncsa,
3112: ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
3113: hs@,
3114: dsl@, fsl@, tsl@, use=ncsa-m,
3115: # alternate -TD:
3116: # The documented function-key mapping refers to the Apple Extended Keyboard
3117: # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
3118: # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
3119: # some keyboards and many applications require these as F1-F4.
3120: #
3121: ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
3122: kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3123: kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3124: kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
3125: kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
3126: kf8=\E[19~, kf9=\E[20~,
3127: use=ncsa,
3128:
3129: #### Pilot Pro Palm-Top
1.1 millert 3130: #
1.11 millert 3131: # From: Jason Downs <downsj@downsj.com>, 15 Jun 1997 (Top Gun Telnet's author)
3132: pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
3133: am, xenl,
3134: cols#39, lines#16,
3135: bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
3136: cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
3137: ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
3138: rmso=\EB, smso=\Eb,
3139:
3140: ######## COMMERCIAL WORKSTATION CONSOLES
1.1 millert 3141: #
1.11 millert 3142:
3143: #### Alpha consoles
1.1 millert 3144: #
1.11 millert 3145:
3146: # This is from the OSF/1 Release 1.0 termcap file
3147: pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
1.1 millert 3148: am, xon,
1.11 millert 3149: cols#80, lines#25,
3150: bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3151: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
3152: el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
3153: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
3154: nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
1.1 millert 3155:
1.11 millert 3156: #### Sun consoles
1.1 millert 3157: #
3158:
1.11 millert 3159: # :is1: resets scrolling region in case a previous user had used "tset vt100"
3160: oldsun|Sun Microsystems Workstation console,
3161: OTbs, am, km, mir, msgr,
3162: cols#80, it#8, lines#34,
3163: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
3164: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
3165: dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
3166: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3167: is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3168: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
3169: rmso=\E[m, sgr0=\E[m, smso=\E[7m,
3170: # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
3171: # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
3172: # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
3173: sun-il|Sun Microsystems console with working insert-line,
3174: am, km, msgr,
3175: cols#80, lines#34,
3176: bel=^G, bold@, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3177: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
3178: dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
3179: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3180: kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3181: kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
3182: kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
3183: kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
3184: kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
3185: knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
3186: kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
3187: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3188: sgr0=\E[m, smso=\E[7m, smul@, u8=\E[1t, u9=\E[11t,
3189: # On a SparcStation 5, <il1>/<il> flake out on the last line.
3190: # Unfortunately, without them the terminal has no way to scroll.
3191: sun-ss5|Sun SparcStation 5 console,
3192: il@, il1@, use=sun-il,
3193: # If you are using an SS5, change the sun definition to use sun-ss5.
3194: sun|sun1|sun2|Sun Microsystems Inc. workstation console,
3195: use=sun-il,
1.1 millert 3196:
1.11 millert 3197: # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
3198: sun-s|Sun Microsystems Workstation window with status line,
3199: hs,
3200: dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
3201: sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
3202: hs,
3203: dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
3204: sun-48|Sun 48-line window,
3205: cols#80, lines#48, use=sun,
3206: sun-34|Sun 34-line window,
3207: cols#80, lines#34, use=sun,
3208: sun-24|Sun 24-line window,
3209: cols#80, lines#24, use=sun,
3210: sun-17|Sun 17-line window,
3211: cols#80, lines#17, use=sun,
3212: sun-12|Sun 12-line window,
3213: cols#80, lines#12, use=sun,
3214: sun-1|Sun 1-line window for sysline,
3215: eslok, hs,
3216: cols#80, lines#1,
3217: dsl=^L, fsl=\E[K, tsl=^M, use=sun,
3218: sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
3219: ich1@, rmir@, smir@,
3220: use=sun,
3221: sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
3222: lines#35,
3223: rmcup=\E[>4h, smcup=\E[>4l, use=sun,
1.1 millert 3224:
3225: #### Iris consoles
3226: #
3227:
3228: # (wsiris: this had extension capabilities
3229: # :HS=\E7F2:HE=\E7F7:\
3230: # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
3231: # See the note on Iris extensions near the end of this file.
3232: # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
3233: # <flash> from BRL -- esr)
3234: wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
3235: OTbs, OTnc, OTpt, am,
3236: OTkn#3, cols#80, it#8, lines#40,
1.11 millert 3237: OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
3238: cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
3239: cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
3240: flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
3241: ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
3242: kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
3243: kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
3244: rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
3245: smul=\E7R2\E9P,
1.1 millert 3246:
3247: #### NeWS consoles
3248: #
3249: # Console terminal windows under the NeWS (Sun's Display Postscript windowing
3250: # environment). Note: these have nothing to do with Sony's News workstation
3251: # line.
3252: #
3253:
3254: # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
3255: # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
3256: psterm|psterm-basic|NeWS psterm-80x34,
3257: OTbs, am, hs, km, ul,
3258: cols#80, it#8, lines#34,
1.11 millert 3259: blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
3260: cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
3261: dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
3262: home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
3263: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
3264: ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
3265: sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
3266: tsl=\EOl,
1.1 millert 3267: psterm-96x48|NeWS psterm 96x48,
1.11 millert 3268: cols#96, lines#48, use=psterm,
1.1 millert 3269: psterm-90x28|NeWS psterm 90x28,
1.11 millert 3270: cols#90, lines#28, use=psterm,
1.1 millert 3271: psterm-80x24|NeWS psterm 80x24,
1.11 millert 3272: cols#80, lines#24, use=psterm,
1.1 millert 3273: # This is a faster termcap for psterm. Warning: if you use this termcap,
3274: # some control characters you type will do strange things to the screen.
3275: # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
3276: psterm-fast|NeWS psterm fast version (flaky ctrl chars),
3277: OTbs, am, hs, km, ul,
3278: cols#80, it#8, lines#34,
1.11 millert 3279: blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
3280: cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
3281: dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
3282: il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3283: kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
3284: rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
3285: smso=^Oo, smul=^Ou, tsl=^Ol,
1.1 millert 3286:
3287: #### NeXT consoles
3288: #
3289: # Use `glasstty' for the Workspace application
3290: #
3291:
3292: # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
3293: next|NeXT console,
3294: am, xt,
3295: cols#80, it#8, lines#24,
1.11 millert 3296: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3297: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
3298: ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
3299: rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
1.1 millert 3300: nextshell|NeXT Shell application,
3301: am,
3302: cols#80,
1.11 millert 3303: bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
3304: kcud1=^J, nel=^M^J,
1.1 millert 3305:
1.11 millert 3306: #### Sony NEWS workstations
1.1 millert 3307: #
3308:
1.11 millert 3309: # (news-unk: this had :KB=news: -- esr)
3310: news-unk|SONY NEWS vt100 emulator common entry,
3311: OTbs, OTpt, am, xenl,
3312: cols#80,
3313: OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
3314: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
3315: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
3316: ed=\E[J, el=\E[K, home=\E[H, ht=^I,
3317: if=/usr/lib/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
3318: is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
3319: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
3320: kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
3321: kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
3322: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3323: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
3324: sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3325: #
3326: # (news-29: this had :TY=ascii: --esr)
3327: news-29,
3328: lines#29, use=news-unk,
3329: # (news-29-euc: this had :TY=euc: --esr)
3330: news-29-euc,
3331: use=news-29,
3332: # (news-29-sjis: this had :TY=sjis: --esr)
3333: news-29-sjis,
3334: use=news-29,
3335: #
3336: # (news-33: this had :TY=ascii: --esr)
3337: news-33,
3338: lines#33, use=news-unk,
3339: # (news-33-euc: this had :TY=euc: --esr)
3340: news-33-euc,
3341: use=news-33,
3342: # (news-33-sjis: this had :TY=sjis: --esr)
3343: news-33-sjis,
3344: use=news-33,
3345: #
3346: # (news-42: this had :TY=ascii: --esr)
3347: news-42,
3348: lines#42, use=news-unk,
3349: # (news-42-euc: this had :TY=euc: --esr)
3350: news-42-euc,
3351: use=news-42,
3352: # (news-42-sjis: this had :TY=sjis: --esr)
3353: news-42-sjis,
3354: use=news-42,
3355: #
3356: # NEWS-OS old termcap entry
3357: #
3358: # (news-old-unk: this had :KB=news:TY=sjis: --esr)
3359: news-old-unk|SONY NEWS vt100 emulator common entry,
3360: OTbs, OTpt, am, xenl,
3361: cols#80, vt#3,
3362: OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
3363: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
3364: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
3365: home=\E[H, ht=^I, if=/usr/lib/tabset/vt100, kbs=^H,
3366: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3367: kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
3368: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3369: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3370: sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3371: #
3372: # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
1.14 millert 3373: nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
1.11 millert 3374: OTbs,
3375: lines#40,
3376: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk,
3377: #
3378: # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
3379: nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
3380: lines#42,
3381: is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, use=news-old-unk,
3382: #
3383: # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
3384: nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
3385: OTbs,
3386: lines#40,
3387: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk,
3388: #
3389: # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
3390: nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
3391: OTbs,
3392: lines#31,
3393: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk,
3394: #
3395: # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
3396: # also the alias vt100-bm.
1.14 millert 3397: nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
1.11 millert 3398: OTbs,
3399: lines#33,
3400: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, use=news-old-unk,
3401: #
3402: # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
1.14 millert 3403: nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
1.19 ! millert 3404: OTbs,
1.11 millert 3405: lines#31,
3406: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk,
3407: #
3408: # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
3409: news28|sony vt100 emulator 28 lines,
3410: OTbs,
3411: lines#28,
3412: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8, use=news-old-unk,
3413: #
3414: # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
3415: news29|news28-a|sony vt100 emulator 29 lines,
3416: lines#29,
3417: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8, use=news-old-unk,
1.1 millert 3418: #
1.11 millert 3419: # (news511: this had :TY=sjis: --esr)
3420: nwp511|nwp-511|nwp-511 vt100,
3421: OTbs, OTpt, am, xenl,
1.1 millert 3422: cols#80, lines#24,
1.11 millert 3423: clear=\E[;H\E[2J$<20/>, cuf1=\E[C,
3424: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
3425: ed=\E[J$<30/>, el=\E[K$<3/>,
3426: flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
3427: il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
3428: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
3429: kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
3430: ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
3431: rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
3432: smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3433: # (news517: this had :TY=sjis:. --esr)
3434: nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
3435: eslok, hs,
3436: cols#80, lines#30,
3437: OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
3438: is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3439: tsl=\E[1$}\E[;%df,
3440: use=vt200,
3441: # (news517-w: this had :TY=sjis:. --esr)
3442: nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
1.1 millert 3443: eslok, hs,
1.11 millert 3444: cols#132, lines#50,
3445: OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
3446: is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
3447: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
3448: tsl=\E[1$}\E[;%df, use=vt200,
1.1 millert 3449:
3450: #### Common Desktop Environment
3451: #
3452:
3453: # This ships with Sun's CDE in Solaris 2.5
3454: # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
3455: dtterm|CDE desktop terminal,
3456: am, mir, msgr, xenl, xon,
3457: colors#8, cols#80, it#8, lines#24, lm#0, pairs#64,
3458: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3459: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3460: clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
3461: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3462: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3463: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3464: dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
1.11 millert 3465: dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3466: enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
3467: ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3468: ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
3469: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1.1 millert 3470: kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3471: kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3472: kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3473: kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3474: kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3475: kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
3476: kslt=\E[4~, nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM,
3477: rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m,
3478: rmul=\E[24m, sc=\E7, setab=\E[%p1%{40}%+%dm,
3479: setaf=\E[%p1%{30}%+%dm,
3480: sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1.11 millert 3481: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
1.1 millert 3482: smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
3483:
1.11 millert 3484: #### Non-Unix Consoles
1.1 millert 3485: #
3486:
1.11 millert 3487: # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
3488: # a Unix-style environment used on OS/2. (Note that the suffix makes some
3489: # names longer than 14 characters, the nominal maximum).
1.1 millert 3490: #
1.11 millert 3491: # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
3492: ansi-emx|ANSI.SYS color,
3493: am, bce, eo, mir, msgr, xenl, xon,
3494: colors#16, cols#80, it#8, lines#25, pairs#64,
3495: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3496: clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
3497: cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
3498: dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
3499: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
3500: kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
3501: kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@,
3502: kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O,
3503: knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[5;37;41m,
3504: rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
3505: rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
3506: setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
3507: smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
3508: tbc=\E[3g, u8=\E[?6c, u9=\E[c,
3509: ansi-color-2-emx|ANSI.SYS color 2,
3510: am, bce, eo, mir, msgr, xenl, xon,
3511: colors#16, cols#80, it#8, lines#25, pairs#64,
3512: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3513: clear=\E[0;37;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
3514: cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
3515: dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
3516: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
3517: kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
3518: kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@,
3519: kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O,
3520: knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[1;37;46m,
3521: rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;37;44m,
3522: rmul=\E[0;37;44m, rs1=\Ec, setab=\E[4%p1%dm,
3523: setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smir=\E[4h,
3524: smpch=\E[11m, smso=\E[1;37;46m, smul=\E[1;36;44m,
3525: tbc=\E[3g, u8=\E[?6c, u9=\E[c,
3526: ansi-color-3-emx|ANSI.SYS color 3,
3527: am, bce, eo, mir, msgr, xenl, xon,
3528: colors#16, cols#80, it#8, lines#25, pairs#64,
3529: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3530: clear=\E[0;37;40m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
3531: cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
3532: dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
3533: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
3534: kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
3535: kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@,
3536: kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O,
3537: knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[1;37;46m,
3538: rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;37;40m,
3539: rmul=\E[0;37;40m, rs1=\Ec, setab=\E[4%p1%dm,
3540: setaf=\E[3%p1%dm, sgr0=\E[0;10m, smir=\E[4h,
3541: smpch=\E[11m, smso=\E[1;37;46m, smul=\E[0;36;40m,
3542: tbc=\E[3g, u8=\E[?6c, u9=\E[c,
3543: mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
3544: am,
1.1 millert 3545: cols#80, it#8, lines#24,
1.11 millert 3546: clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
3547: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
3548: ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
3549: kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
3550: kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
3551: kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
3552: sgr0=\E[0m,
1.1 millert 3553:
1.11 millert 3554: # Use this for cygwin32 (tested with beta 19.1)
3555: # underline is colored bright magenta
3556: # shifted kf1-kf12 are kf11-kf22
3557: cygwin|ansi emulation for cygwin32,
3558: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3559: kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
3560: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3561: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3562: kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
3563: kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3564: khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
3565: use=ansi.sys,
1.1 millert 3566:
1.11 millert 3567: # This entry fits the Windows NT console when the _POSIX_TERM environment
3568: # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
3569: # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
3570: # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
3571: # systems is not, and (surprise!) they match very well.
1.1 millert 3572: #
1.11 millert 3573: # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
3574: # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
3575: # are the installation instructions a pile of mind-numbing bureaucratese,
3576: # but the termcap entry is actually broken and unusable as given; the :do:
3577: # capability is misspelled "d".
1.1 millert 3578: #
3579: # To use this, you need to a bunch of environment variables:
3580: #
3581: # SET _POSIX_TERM=on
3582: # SET TERM=ansi
3583: # SET TERMCAP=location of termcap file in POSIX file format
3584: # which is case-sensitive.
3585: # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
3586: # SET TMP=//C/TEMP
3587: #
3588: # Important note: setting the TMP environment variable in POSIX style renders
3589: # it incompatible with a lot of other applications, including Visual C++. So
3590: # you should have a separate command window just for vi. All the other
3591: # variables may be permanently set in the Control Panel\System applet.
3592: #
3593: # You can find out more about the restrictions of this facility at
3594: # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
3595: #
3596: # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
3597: ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
3598: am, bw, msgr,
3599: cols#80, it#8, lines#25,
3600: bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3601: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
3602: home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
3603: kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
3604: ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
1.14 millert 3605: # From: jew@venus.sunquest.com
3606: # Date: 19 Feb 93 23:41:07 GMT
3607: # Here's a combination of ansi and vt100 termcap
3608: # entries that works nearly perfectly for me
3609: # (Gateway 2000 Handbook and Microsoft Works 3.0):
3610: pcmw|PC running Microsoft Works,
3611: am, xenl,
3612: cols#80, it#8, lines#24, vt#3,
3613: bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
3614: clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
3615: cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
3616: cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
3617: ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
3618: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3619: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
3620: rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
3621: ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
3622: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3623: sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3624: tbc=\E[3g$<2/>,
1.1 millert 3625:
3626: ######## COMMON TERMINAL TYPES
3627: #
3628: # This section describes terminal classes and maker brands that are still
3629: # quite common, but have proprietary command sets not blessed by ANSI.
3630: #
3631:
1.11 millert 3632: #### Altos
1.1 millert 3633: #
1.11 millert 3634: # Altos made a moderately successful line of UNIX boxes. In 1990 they were
3635: # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
3636: # Acer has a web site at http://www.acer.com.
1.1 millert 3637: #
1.11 millert 3638: # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
3639: # His comments suggest they were shipped with the system.
1.1 millert 3640: #
3641:
1.11 millert 3642: # (altos2: had extension capabilities
3643: # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
3644: # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
3645: # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
3646: # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
3647: # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
3648: # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
3649: # :HL=^AP\r:SP=\E[i:\
3650: # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
3651: # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
3652: # Comparison with the k* capabilities makes it obvious that the c* things are
3653: # shift keys. I have renamed them to keys 32 and up accordingly. Also,
3654: # :sr: was given as a boolean-- esr)
3655: altos2|alt2|altos-2|altos II,
3656: cols#80, it#8, lines#24, xmc#0,
3657: clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
3658: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl=\E[M,
3659: ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
3660: if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
3661: is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
3662: kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
3663: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
3664: kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
3665: kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
3666: kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
3667: kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
3668: kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
3669: nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
3670: smam=\E[?7h, smso=\E[7m, smul=\E[4m,
3671: # (altos3: had extension capabilities
3672: # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
3673: # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
3674: # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
3675: # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
3676: # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
3677: # :HL=^AP\r:SP=\E[i:\
3678: # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
3679: altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
3680: blink=\E[5p, ri=\EM, sgr0=\E[p,
3681: use=altos2,
3682: altos4|alt4|altos-4|altos IV,
3683: use=wy50,
3684: # (altos7: had extension capabilities:
3685: # :GG#0:GI=\EH8:GF=\EH7:\
3686: # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
3687: # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
3688: # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
3689: # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
3690: # Comparison with the k* capabilities makes it obvious that the c* things are
3691: # shift keys. I have renamed them to keys 32 and up accordingly. I have
3692: # also made this entry relative to adm12 in order to give it an <sgr>. The
3693: # <invis> imported by use=adm+sgr may work, let me know. -- esr)
3694: altos7|alt7|altos VII,
3695: am, mir,
3696: cols#80, lines#24, xmc#0,
3697: acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
3698: clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
1.1 millert 3699: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 3700: dim=\EGp, dl=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
3701: ind=^J, invis=\EG1,
3702: is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
3703: kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
3704: kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
3705: kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
3706: kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
3707: kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
3708: kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
3709: kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
3710: knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
3711: rmir=\Er, smir=\Eq,
3712: use=adm+sgr,
3713: altos7pc|alt7pc|altos PC VII,
3714: kend=\ET, use=altos7,
3715:
3716: #### Hewlett-Packard (hp)
3717: #
3718: # Hewlett-Packard
3719: # 8000 Foothills Blvd
3720: # Roseville, CA 95747
3721: # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
3722: # 1-(800)-633-3600 (General customer support)
3723: #
1.14 millert 3724: #
3725: # As of March 1998, HP no longer has any terminals in production.
3726: # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
3727: # supported (they still have parts). So are the 2392a and 2394a.
3728: # See the WORKSTATION CONSOLES section for the 700s.
3729: #
1.11 millert 3730:
3731: # Generic HP terminal - this should (hopefully) work on any HP terminal.
3732: hpgeneric|hp|hewlett-packard generic terminal,
3733: OTbs, OTpt, am, da, db, mir, xhp,
3734: cols#80, lines#24, lm#0, vt#6,
3735: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
3736: cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
3737: ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
3738: ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
3739: sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
3740: vpa=\E&a%p1%dY,
3741:
3742: hp110|hewlett-packard model 110 portable,
3743: lines#16, use=hpgeneric,
3744:
3745: hp+pfk+cr|hp function keys with CR,
3746: kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
3747: kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
3748:
3749: hp+pfk-cr|hp function keys w/o CR,
3750: kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
3751: kf8=\Ew,
3752:
3753: # The hp2621s use the same keys for the arrows and function keys,
3754: # but not separate escape sequences. These definitions allow the
3755: # user to use those keys as arrow keys rather than as function
3756: # keys.
3757: hp+pfk+arrows|hp alternate arrow definitions,
3758: kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
3759: kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
3760: kll=\Eq\r, kri=\Es\r,
3761:
3762: hp+arrows|hp arrow definitions,
3763: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
3764: kind=\ES, kll=\EF, kri=\ET,
3765:
3766: # Generic stuff from the HP 262x series
1.1 millert 3767: #
1.11 millert 3768: hp262x|HP 262x terminals,
3769: xhp,
3770: blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
3771: invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
3772: kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
3773: kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
3774: krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
3775: sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
3776: sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
3777:
3778: # Note: no <home> on HPs since that homes to top of memory, not screen.
3779: # Due to severe 2621 braindamage, the only way to get the arrow keys to
3780: # transmit anything at all is to turn on the function key labels
3781: # with <smkx>, and even then the user has to hold down shift!
3782: # The default 2621 turns off the labels except when it has to to
3783: # enable the function keys. If your installation prefers labels
3784: # on all the time, or off all the time (at the "expense" of the
3785: # function keys), use 2621-nl or 2621-wl.
3786: #
3787: # Note: there are newer ROMs for 2621's that allow you to set
3788: # strap A so the regular arrow keys xmit \EA, etc, as with the
3789: # 2645. However, even with this strap set, the terminal stops
3790: # xmitting if you reset it, until you unset and reset the strap!
3791: # Since there is no way to set/unset the strap with an escape
3792: # sequence, we don't use it in the default.
3793: # If you like, you can use 2621-ba (brain-damaged arrow keys).
3794: hp2621-ba|2621 w/new rom and strap A set,
3795: rmkx@, smkx@, use=hp+arrows,
3796: use=hp2621,
3797:
3798: # hp2621 with function labels. Most of the time they are off,
3799: # but inside vi, the function key labels appear. You have to
3800: # hold down shift to get them to xmit.
3801: hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
3802: is2=\E&jA\r, rmkx=\E&jA,
3803: use=hp2621-fl,
3804: hp2621-fl|hp 2621,
3805: xhp@, xon,
3806: pb#19200,
3807: cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
3808: ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
3809: sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
3810: use=hp+pfk+cr, use=hpgeneric,
3811:
3812: # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
3813: hp2621p|hp 2621 with printer,
3814: mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
3815:
3816: hp2621p-a|hp2621p with fn as arrows,
3817: use=hp+pfk+arrows, use=hp2621p,
3818:
3819: # hp2621 with k45 keyboard
3820: hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
3821: kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3822: khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A,
3823: use=hp2621,
3824:
3825: # 2621 using all 48 lines of memory, only 24 visible at any time.
3826: hp2621-48|48 line 2621,
3827: lines#48,
3828: cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, use=hp2621,
3829:
3830: # 2621 with no labels ever. Also prevents vi delays on escape.
3831: hp2621-nl|hp 2621 with no labels,
3832: kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, use=hp2621-fl,
3833:
3834: # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
3835: # (wrong).
1.1 millert 3836: #
1.11 millert 3837: hp2621-nt|hp 2621 w/no tabs,
3838: ht@, use=hp2621,
3839:
3840: # Hp 2624 B with 4 or 10 pages of memory.
3841: #
3842: # Some assumptions are made with this entry. These settings are
3843: # NOT set up by the initialization strings.
1.1 millert 3844: #
1.11 millert 3845: # Port Configuration
3846: # RecvPace=Xon/Xoff
3847: # XmitPace=Xon/Xoff
3848: # StripNulDel=Yes
1.1 millert 3849: #
1.11 millert 3850: # Terminal Configuration
3851: # InhHndShk=Yes
3852: # InhDC2=Yes
3853: # XmitFnctn(A)=No
3854: # InhEolWrp=No
1.1 millert 3855: #
1.11 millert 3856: # Note: the 2624 DOES have a true <home>, believe it or not!
1.1 millert 3857: #
1.11 millert 3858: # The 2624 has an "error line" to which messages can be sent.
3859: # This is CLOSE to what is expected for a "status line". However,
3860: # after a message is sent to the "error line", the next carriage
3861: # return is EATEN and the "error line" is turned back off again!
3862: # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
1.1 millert 3863: #
1.11 millert 3864: # This entry supports emacs (and any other program that uses raw
3865: # mode) at 4800 baud and less. I couldn't get the padding right
3866: # for 9600.
1.1 millert 3867: #
1.11 millert 3868: # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
3869: hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
3870: da, db,
3871: lm#96,
3872: flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
3873:
3874: # This hp2626 entry does not use any of the fancy windowing stuff
3875: # of the 2626.
3876: #
3877: # Indeed, terminfo does not yet handle such stuff. Since changing
3878: # any window clears memory, it is probably not possible to use
3879: # this for screen opt.
3880: #
3881: # ed is incredibly slow most of the time - I am guessing at the
3882: # exact padding. Since the terminal uses xoff/xon this is intended
3883: # only for cost computation, so that the terminal will prefer el
3884: # or even dl1 which is probably faster!
3885: #
3886: # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
3887: # extra slow on the last line of the window.
3888: #
3889: # The padding probably should be changed.
1.1 millert 3890: #
1.11 millert 3891: hp2626|hp2626a|hp2626p|hp 2626,
3892: da, db,
3893: lm#0, pb#19200,
3894: ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
3895: is2=\E&j@\r, rin=\E&r%p1%dU,
3896: use=hp+pfk+cr, use=hp+labels, use=scrhp,
3897:
3898: # This entry is for sysline. It allocates a 23 line window with
3899: # a 115 line workspace for regular use, and a 1 line window for
3900: # the status line.
3901: #
3902: # This assumes port 2 is being used.
3903: # Turn off horizontal line, Create ws #1 with 115 lines,
3904: # Create ws #2 with 1 line, Create window #1 lines 1-23,
3905: # Create window #2 lines 24-24, Attach cursor to workspace #1.
3906: # Note that this clears the tabs so it must be done by tset before
3907: # it sets the tabs.
1.1 millert 3908: #
1.11 millert 3909: hp2626-s|hp 2626 using only 23 lines,
3910: eslok, hs,
3911: lines#23,
3912: fsl=\E&d@\E&w7f2p1I\E&w4f1I,
3913: is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
3914: tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC,
3915: use=hp2626,
3916: # Force terminal back to 24 lines after being 23.
3917: hp2626-ns|hp 2626 using all 24 lines,
3918: is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r, use=hp2626,
3919: # Various entries useful for small windows on 2626.
3920: hp2626-12|hewlett-packard 2626 12 lines,
3921: lines#12, use=hp2626,
3922: hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
3923: cols#40, lines#12, use=hp2626,
3924: hp2626-x40|hewlett-packard 2626 40 columns,
3925: cols#40, use=hp2626,
3926: hp2626-12-s|hewlett-packard 2626 11 lines plus status,
3927: lines#11, use=hp2626-s,
3928:
1.1 millert 3929: #
1.11 millert 3930: # hp2627 color tubes from University of Wisconsin
1.1 millert 3931: #
1.11 millert 3932: hp2627a-rev|hp 2627 with reverse video colors,
3933: cr=^M, cud1=^J, ht=^I, ind=^J,
3934: is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
3935: kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
3936: smul=\E&dD\E&v1S,
3937: use=hp2621-nl,
3938: hp2627a|hp 2627 color terminal with no labels,
3939: cr=^M, cud1=^J, ht=^I, ind=^J,
3940: is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
3941: kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
3942: rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
3943: use=hp2621-nl,
3944: hp2627c|hp 2627 color (cyan) terminal with no labels,
3945: cr=^M, cud1=^J, ht=^I, ind=^J,
3946: is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
3947: kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
3948: use=hp2627a,
3949:
3950: # hp2640a doesn't have the Y cursor addressing feature, and C is
3951: # memory relative instead of screen relative, as we need.
1.1 millert 3952: #
1.11 millert 3953: hp2640a|hp 2640a,
3954: cup@, rmkx@, smkx@, use=hp2645,
3955:
3956: hp2640b|hp2644a|hp 264x series,
3957: rmkx@, smkx@, use=hp2645,
3958:
3959: # (hp2641a: removed unknown :gu: -- esr)
3960: hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
3961: am, da, db, mir, xhp,
3962: cols#80, lines#24,
3963: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
3964: cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
3965: ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
3966: if=/usr/share/tabset/std, il1=\EL, ind=^J,
3967: is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
3968: rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
3969: vpa=\E&a%p1%2dY,
3970:
3971: # This terminal should be used at 4800 baud or less. It needs padding for
3972: # plain characters at 9600, I guessed at an appropriate cr delay. It really
3973: # wants ^E/^F handshaking, but that doesn't work well even if you write
3974: # software to support it.
3975: hp2645|hp45|HP 2645 series,
3976: pb#9600,
3977: blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
3978: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
3979: ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
3980: kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
3981: rmkx=\E&s0A,
3982: sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
3983: sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD,
3984: use=hpgeneric,
3985: # You should use this terminal at 4800 baud or less.
3986: hp2648|hp2648a|HP 2648a graphics terminal,
3987: clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
3988: dch1=\EP$<7>, ip=$<5>,
3989: use=hp2645,
3990:
3991: # The HP 150 terminal is a fairly vanilla HP terminal, with the
3992: # clreol standout problem. It also has graphics capabilities and
3993: # a touch screen, which we don't describe here.
3994: hp150|hewlett packard Model 150,
3995: OTbs, use=hp2622,
3996:
3997: # HP 2382a terminals, "the little ones." They don't have any
3998: # alternate character set support and sending out ^N/^O will
3999: # leave the screen blank.
4000: hp2382a|hp2382|hewlett packard 2382a,
4001: da, db,
4002: lh#1, lm#48,
4003: acsc@,
4004: pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
4005: rmacs@,
4006: sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
4007: sgr0=\E&d@, smacs@,
4008: use=hp+labels, use=scrhp,
4009:
4010: hp2621-a|hp2621a-a|hp2621 with fn as arrows,
4011: use=hp+pfk+arrows, use=hp2621-fl,
4012:
4013: # newer hewlett packard terminals
4014:
4015: newhpkeyboard|generic entry for HP extended keyboard,
4016: kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4017: kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
4018: kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
4019: kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
4020: use=hp+pfk-cr,
4021:
4022: newhp|generic entry for new hewlett packard terminals,
4023: am, bw, mir, xhp, xon,
4024: cols#80, lines#24, pb#4800,
4025: acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
4026: bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
4027: cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
4028: dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
4029: invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
4030: pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
4031: pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
4032: pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
4033: rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
4034: sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
4035: sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
4036: tbc=\E3,
4037: use=newhpkeyboard,
4038:
4039: memhp|memory relative addressing for new HP ttys,
4040: vt#6,
4041: clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
4042: cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
4043: home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
4044: mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
4045:
4046: scrhp|screen relative addressing for new HP ttys,
4047: clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
4048: cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
4049: cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
4050: home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
4051: mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
4052:
4053: # (hp+labels: added label values from a BRL termcap -- esr)
4054: hp+labels|"standard" label info for new HP ttys,
4055: lh#2, lw#8, nlab#8,
4056: lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
4057: pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
4058: rmln=\E&j@, smln=\E&jB,
4059:
4060: hp+printer|"standard" printer info for HP ttys,
4061: ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
4062:
4063:
4064: # The new hp2621b is kind of a cross between the old 2621 and the
4065: # new 262x series of machines. It has dip-switched options.
4066: # The firmware has a bug in it such that if you give it a null
4067: # length label, the following character is eaten!
4068: hp2621b|hp 2621b with old style keyboard,
4069: lh#1, lm#48, lw#8, nlab#8,
4070: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
4071: kind=\ET, kll=\EF, kri=\ES,
4072: pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
4073: smln=\E&jB,
4074: use=hp2621,
4075:
4076: hp2621b-p|hp 2621b with printer,
4077: use=hp+printer, use=hp2621b,
4078:
4079: # hp2621b - new 2621b with new extended keyboard
4080: # these are closer to the new 26xx series than the other 2621b
4081: hp2621b-kx|hp 2621b with extended keyboard,
4082: use=newhpkeyboard, use=hp2621b,
4083:
4084: hp2621b-kx-p|hp 2621b with new keyboard & printer,
4085: use=hp+printer, use=hp2621b-kx,
4086:
4087: # Some assumptions are made in the following entries.
4088: # These settings are NOT set up by the initialization strings.
4089: #
4090: # Port Configuration
4091: # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
4092: #
4093: # Terminal Configuration
4094: # InhHndShk(G)=Yes InhDC2(H)=Yes
4095: # XmitFnctn(A)=No InhEolWrp=No
1.1 millert 4096: #
1.11 millert 4097: #
4098: # Hp 2622a & hp2623a display and graphics terminals
1.1 millert 4099: #
1.11 millert 4100: hp2622|hp2622a|hp 2622,
4101: da, db,
4102: lm#0, pb#19200,
4103: is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
4104:
4105: # The 2623 is a 2622 with extra graphics hardware.
4106: hp2623|hp2623a|hp 2623,
4107: use=hp2622,
4108:
4109: hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
4110: use=hp+printer, use=hp2624,
4111:
4112: # The hewlett packard B can have an optional extra 6 pages of memory.
4113: hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
4114: lm#240, use=hp2624,
4115:
4116: hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
4117: lm#240, use=hp2624b-p,
4118:
4119: # Color manipulations for HP terminals
4120: hp+color|hp with colors,
4121: ccc,
4122: colors#16, ncv#17, pairs#7,
4123: initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
4124: oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
4125: op=\E&v0S, scp=\E&v%p1%dS,
4126:
4127: # <is2> sets the screen to be 80 columns wide
4128: hp2397a|hp2397|hewlett packard 2397A color terminal,
4129: is2=\E&w6f80X,
4130: use=memhp, use=hp+labels, use=hp+color,
4131:
4132: # HP 700/44 Setup parameters:
4133: # Terminal Mode HP-PCterm
4134: # Inhibit Auto Wrap NO
4135: # Status Line Host Writable
4136: # PC Character Set YES
4137: # Twenty-Five Line Mode YES
4138: # XON/XOFF @128 or 64 (sc)
4139: # Keycode Mode NO or YES (sc)
4140: # Backspace Key BS or BS/DEL
1.1 millert 4141: #
1.11 millert 4142: # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
4143: # \E\\? does not turn off keycode mode
4144: # <smsc> sets alternate start/stop; keycode on
4145: hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
4146: am, eo, xenl, xon,
4147: cols#80, lines#25,
4148: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
4149: bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
4150: cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
4151: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
4152: ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
4153: ind=^J,
4154: is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
4155: kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4156: kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
4157: kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
4158: kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
4159: kpp=\E[5~, rmam=\E[?7l,
4160: rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
4161: rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
4162: smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
4163: smul=\E[4m, xoffc=g, xonc=e,
1.1 millert 4164: #
1.11 millert 4165: # (hp2392: copied <rmir> here from hpex -- esr)
4166: hp2392|239x series,
4167: cols#80,
4168: cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
4169: kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
4170: kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
4171: rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
4172: use=hpsub,
4173:
4174: hpsub|hp terminals -- capability subset,
4175: am, da, db, mir, xhp, xon,
4176: lines#24,
4177: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
4178: cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
4179: ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
4180: is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
4181: kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
4182: sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
4183:
4184: # hpex:
4185: # May be used for most 24 x 80 hp terminals,
4186: # but has no padding added, so may allow runover in some terminals at high
4187: # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
4188: # hp98x5 terminal emulators or hp98x6 consoles.
4189: # Adds xy-cursor addressing, vertical cursor addressing, home,
4190: # last line, and underline capabilities.
1.1 millert 4191: #
1.11 millert 4192: # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
4193: # moved <rmir> here from hpsub -- esr)
4194: hpex|hp extended capabilites,
4195: cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
4196: kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
4197: smul=\E&dD, vpa=\E&a%p1%dY,
4198: use=hpsub,
4199:
4200: # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
4201: hp2|hpex2|hewlett-packard extended capabilities newer version,
4202: am, da, db, mir, xhp,
4203: cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
4204: bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
4205: cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
4206: dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
4207: il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
4208: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
4209: ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
4210: kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
4211: kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
4212: krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
4213: pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
4214: pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
4215: pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
4216: pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
4217: rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
4218: sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4219: sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
4220: smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4221:
4222: # HP 236 console
4223: # From: <ddavis@ic.berkeley.edu>
4224: hp236|hp236 internal terminal emulator,
4225: OTbs, am,
4226: cols#80, lines#24,
4227: clear=\EF, cnorm=\EDE, cub1=^H,
4228: cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
4229: dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
4230: sgr0=\ECI, smso=\EBI,
4231:
4232: # This works on a hp300 console running Utah 4.3 BSD
4233: # From: Craig Leres <leres@okeeffe.berkeley.edu>
4234: hp300h|HP Catseye console,
4235: OTbs, am, da, db, mir, xhp,
4236: cols#128, lines#51, lm#0, xmc#0,
4237: bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
4238: cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
4239: dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
4240: if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
4241: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
4242: rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
4243: smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
4244: vpa=\E&a%p1%dY,
4245: # From: Greg Couch <gregc@ernie.berkeley.edu>
4246: hp9837|hp98720|hp98721|HP 9000/300 workstations,
4247: OTbs, am, da, db, mir, xhp,
4248: cols#128, it#8, lines#46, lm#0,
4249: bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
4250: cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
4251: dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
4252: il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
4253: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
4254: ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
4255: kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
4256: sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
4257: tbc=\E3, vpa=\E&a%p1%dY,
4258: # HP 9845 desktop computer from BRL
4259: # (hp9845: removed unknown capability :gu: -- esr)
4260: hp9845|HP 9845,
4261: OTbs, am, da, db, eo, mir, xhp,
4262: cols#80, lines#21,
4263: OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY,
4264: cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
4265: if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
4266: smir=\EQ, smso=\E&dB,
4267: # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
4268: # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
4269: # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
4270: hp98550|hp98550a|HP 9000 Series 300 color console,
4271: OTbs, am, da, db, mir, xhp,
4272: cols#128, it#8, lines#49, lm#0,
4273: acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
4274: clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4275: cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
4276: dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
4277: if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
4278: kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4279: kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
4280: kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
4281: khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
4282: knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
4283: rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
4284: sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
4285: smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4286: # From: Victor Duchovni <vic@fine.princeton.edu>
4287: # (hp700-wy: removed obsolete ":nl=^J:";
4288: # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
4289: hp700-wy|HP700/41 emulating wyse30,
4290: OTbs, am, bw, mir, msgr,
4291: cols#80, it#8, lines#24, xmc#1,
4292: cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
4293: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
4294: dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
4295: if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
4296: is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
4297: kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
4298: kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
4299: ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
4300: sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
4301: smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
1.14 millert 4302: hp70092|hp70092a|hp70092A|HP 700/92,
1.11 millert 4303: am, da, db, xhp,
4304: cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
4305: acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
4306: bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
4307: cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
4308: dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
4309: hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
4310: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
4311: ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
4312: kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
4313: kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
4314: krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
4315: rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
4316: sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4317: smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4318:
4319: bobcat|sbobcat|HP 9000 model 300 console,
4320: am, da, db, mir, xhp,
4321: cols#128, it#8, lines#47, xmc#0,
4322: cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
4323: cup=\E&a%dy%dC$<6/>, cuu1=\EA, dch1=\EP, dl1=\EM$<10*/>,
4324: ed=\EJ, el=\EK, hpa=\E&a%dC$<6/>, ht=^I, il1=\EL$<10*/>,
4325: ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4326: khome=\Eh, nel=^M^J, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@,
4327: rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&dB,
4328: smul=\E&dD, vpa=\E&a%dY$<6/>,
4329: gator-t|HP 9000 model 237 emulating extra-tall AAA,
4330: lines#94, use=gator,
4331: gator|HP 9000 model 237 emulating AAA,
4332: bw, km, mir, ul,
4333: cols#128, it#8, lines#47,
4334: bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
4335: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
4336: dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
4337: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
4338: ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
4339: il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
4340: rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
4341: rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
4342: gator-52|HP 9000 model 237 emulating VT52,
4343: cols#128, lines#47, use=vt52,
4344: gator-52t|HP 9000 model 237 emulating extra-tall VT52,
4345: lines#94, use=gator-52,
4346:
4347: #### Honeywell-Bull
1.1 millert 4348: #
1.11 millert 4349: # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
1.1 millert 4350: #
1.11 millert 4351:
4352: # Honeywell Bull terminal. Its cursor and function keys send single
4353: # control characters and it has standout/underline glitch. Most programs
4354: # do not like these features/bugs. Visual bell is realized by flashing the
4355: # "keyboard locked" LED.
4356: dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
4357: cols#80, lines#25,
4358: clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
4359: cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
4360: flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
4361: kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
4362: dku7003|Honeywell Bull DKU 7003 all features described,
4363: msgr,
4364: xmc#1,
4365: blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
4366: rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
4367: use=dku7003-dumb,
4368:
4369: #### Lear-Siegler (adm)
1.1 millert 4370: #
1.11 millert 4371: # These guys are long since out of the terminals business, but
4372: # in 1995 many current terminals still have an adm type as one of their
4373: # emulations (usually their stupidest, and usually labeled adm3, though
4374: # these `adm3' emulations normally have adm3a+ capabilities).
4375: #
4376: # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
4377: # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
4378: # was being held to ground would trigger a send of the top line on the screen.
4379: # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
4380: # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
4381: # for clearing up this point.)
4382:
4383: adm1a|adm1|lsi adm1a,
4384: am,
4385: cols#80, lines#24,
4386: bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4387: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
4388: ind=^J,
4389: adm2|lsi adm2,
4390: OTbs, am,
4391: cols#80, lines#24,
4392: bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4393: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
4394: dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
4395: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
4396: # (adm3: removed obsolete ":ma=^K^P:" -- esr)
4397: adm3|lsi adm3,
4398: OTbs, am,
4399: cols#80, lines#24,
4400: bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
4401: # The following ADM-3A switch settings are assumed for normal operation:
4402: # SPACE U/L_DISP CLR_SCRN 24_LINE
4403: # CUR_CTL LC_EN AUTO_NL FDX
4404: # Other switches may be set for operator convenience or communication
4405: # requirements. I recommend
4406: # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
4407: # ETX_OFF EOT_OFF
4408: # Most of these terminals required an option ROM to support lower case display.
4409: # Open the case and look at the motherboard; if you see an open 24-pin DIP
4410: # socket, you may be out of luck.
4411: #
4412: # (adm3a: some capabilities merged in from BRl entry -- esr)
4413: adm3a|lsi adm3a,
4414: OTbs, am,
4415: cols#80, lines#24,
4416: OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
4417: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
4418: cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
4419: kcuu1=^K, rs2=^N,
4420: adm3a+|adm3a plus,
4421: kbs=^H, use=adm3a,
4422: # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
4423: adm5|lsi adm5,
4424: xmc#1,
4425: bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
4426: rmso=\EG, smso=\EG,
4427: use=adm3a+,
4428: # A lot of terminals other than adm11s use these. Wherever you see
4429: # use=adm+sgr with some of its capabilities disabled, try the
4430: # disabled ones. They may well work but not have been documented or
4431: # expressed in the using entry. We'd like to cook up an <sgr> but the
4432: # <rmacs>/<smacs> sequences of the using entries vary too much.
4433: adm+sgr|adm style highlight capabilities,
4434: invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
4435: smso=\EG4, smul=\EG8,
4436: # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
4437: # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
4438: # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
4439: # be ^Z, according to his entry.
4440: # (adm11: <smul>=\EG4 was obviously erroneous because it also said
4441: # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
4442: adm11|LSI ADM-11,
4443: OTbs, am, hs,
4444: OTkn#8, cols#80, lines#24,
4445: OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
4446: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
4447: cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
4448: kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
4449: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
4450: kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
4451: use=adm+sgr,
4452: # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
4453: # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
4454: # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
4455: # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
4456: # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
4457: # via BRL. That entry asserted <xmc#1>, but I've left that out because
4458: # neither earlier nor later ADMSs have it -- esr)
4459: #
4460: # You will need to get into the supervisor setup before you can set
4461: # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
4462: # see a lot more setup options.
4463: #
4464: # While in supervisor setup you can also use following codes:
4465: #
4466: # Ctrl-P Personality character selections (configure for example what
4467: # arrow keys send, if I recall correctly)
4468: # Ctrl-T tabs 1-80 use left&right to move and up to set and
4469: # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
4470: # Ctrl-B Binary setup (probably not needed. I think that everything can
4471: # be set using normal setup)
4472: # Ctrl-A Answerback mode (enter answerback message)
4473: # Ctrl-U User friendly mode (normal setup)
4474: # Ctrl-D Defaults entire setup and function keys from EPROM tables
4475: # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
4476: # Ctrl-R Reads both setup and functions keys from NVM.
4477: # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
4478: #
4479: # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
4480: # RTS/CTS used nowadays with virtually every modem and computer. 19200
4481: # bps works fine with hardware flow control.
4482: #
4483: # The following null-modem cable should fix this and enable you to use
4484: # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
4485: # set ADM-12+ for DTR handshaking from supervisor setup.
4486: #
4487: # PC Serial ADM-12+
4488: # -------- -------
4489: # 2 - 3
4490: # 3 - 2
4491: # 4 - 5
4492: # 5 - 20
4493: # 6,8 - 4
4494: # 7 - 7
4495: # 20 - 6,8
4496: #
4497: adm12|lsi adm12,
4498: OTbs, OTpt, am, mir,
4499: OTug#1, cols#80, it#8, lines#24,
4500: bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4501: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
4502: dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
4503: is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
4504: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
4505: kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
4506: kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
4507: use=adm+sgr,
4508: # (adm20: removed obsolete ":kn#7:" -- esr)
4509: adm20|lear siegler adm20,
4510: OTbs, am,
4511: cols#80, it#8, lines#24,
4512: bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
4513: cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
4514: dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
4515: kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
4516: sgr0=\E(, smso=\E),
4517: adm21|lear siegler adm21,
4518: xmc#1,
4519: bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
4520: ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
4521: kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
4522: use=adm+sgr, use=adm3a,
4523: # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
4524: # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
4525: # removed bogus-looking \200 from before <cup>. -- esr)
4526: adm22|lsi adm22,
4527: OTbs, am,
4528: cols#80, lines#24,
4529: bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4530: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
4531: dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
4532: is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
4533: kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
4534: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
4535: kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
4536: lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
4537: # ADM 31 DIP Switches
4538: #
4539: # This information comes from two versions of the manual for the
4540: # Lear-Siegler ADM 31.
4541: #
4542: # Main board:
4543: # rear of case
4544: # +-||||-------------------------------------+
4545: # + S1S2 ||S +
4546: # + ||3 +
4547: # + +
4548: # + ||S +
4549: # + ||4 +
4550: # + +
4551: # + +
4552: # + +
4553: # + +
4554: # + +
4555: # +-+ +-+
4556: # + +
4557: # + S5 S6 S7 +
4558: # + == == == +
4559: # +----------------------------------------------+
4560: # front of case (keyboard)
4561: #
4562: # S1 - Data Rate - Modem
4563: # S2 - Data Rate - Printer
4564: # ------------------------
4565: # Data Rate Setting
4566: # -------------------
4567: # 50 0 0 0 0
4568: # 75 1 0 0 0
4569: # 110 0 1 0 0
4570: # 134.5 1 1 0 0
4571: # 150 0 0 1 0
4572: # 300 1 0 1 0
4573: # 600 0 1 1 0
4574: # 1200 1 1 1 0
4575: # 1800 0 0 0 1
4576: # 2000 1 0 0 1
4577: # 2400 0 1 0 1
4578: # 3600 1 1 0 1
4579: # 4800 0 0 1 1
4580: # 7200 1 0 1 1
4581: # 9600 0 1 1 1
4582: # x 1 1 1 1
4583: #
4584: # S3 - Interface/Printer/Attributes
4585: # ---------------------------------
4586: # Printer Busy Control
4587: # sw1 sw2 sw3
4588: # ---------------
4589: # off off off Busy not active, CD disabled
4590: # off off on Busy not active, CD enabled
4591: # off on off Busy active on J5-20, CD disabled
4592: # on off off Busy active on J5-19, CD disabled - Factory Set.
4593: # on off on Busy active on J5-19, CD enabled
4594: #
4595: # sw4 Used in conjuction with S4 for comm interface control - Fact 0
4596: #
4597: # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
4598: #
4599: # sw6 ON enables printer BUSY active LOW - Factory Setting
4600: # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
4601: #
4602: # sw7 ON - steady cursor - Factory Setting
4603: # OFF - blinking cursor
4604: #
4605: # sw8 ON causes selected attribute character to be displayed
4606: # OFF causes SPACE to be displayed instead - Factory Setting
4607: #
4608: # S4 - Interface
4609: # --------------
4610: # Modem Interface
4611: # S3 S4 S4 S4 S4
4612: # sw4 sw1 sw2 sw3 sw4
4613: # ---------------------------
4614: # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
4615: # Current Loop disabled - Factory Setting
4616: # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
4617: # disabled
4618: # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
4619: # Current Loop Disabled
4620: #
4621: # sw5 ON disables dot stretching mode - Factory Setting
4622: # OFF enables dot stretching mode
4623: # sw6 ON enables blanking function
4624: # OFF enables underline function - Factory Setting
4625: # sw7 ON causes NULLS to be displayed as NULLS
4626: # OFF causes NULLS to be displayed as SPACES - Factory Setting
4627: #
4628: # S5 - Word Structure
4629: # -------------------
4630: # sw1 ON enables BREAK key - Factory Setting
4631: # OFF disables BREAK key
4632: # sw2 ON selects 50Hz monitor refresh rate
4633: # OFF selects 60Hz monitor refresh rate - Factory Setting
4634: #
4635: # Modem Port Selection
4636: # sw3 sw4 sw5
4637: # ---------------
4638: # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
4639: # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
4640: # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
4641: # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
4642: # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
4643: # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
4644: # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
4645: # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
1.1 millert 4646: #
4647: # sw6 ON sends bit 8 a 1 (mark)
4648: # OFF sends bit 8 as 0 (space) - Factory Setting
4649: # sw7 ON selects Block Mode
4650: # OFF selects Conversation Mode - Factory Setting
4651: # sw8 ON selects Full Duplex operation
4652: # OFF selects Half Duplex operation - Factory Setting
4653: #
4654: # S6 - Printer
4655: # ------------
4656: # sw1, sw2, sw6, sw7 Reserved - Factory 0
4657: #
4658: # Printer Port Selection
4659: # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
4660: #
4661: # sw8 ON enables Printer Port
4662: # OFF disables Printer Port - Factory Setting
4663: #
4664: # S7 - Polling Address
4665: # --------------------
4666: # sw1-7 Establish ASCII character which designates terminal polling address
4667: # ON = logic 0
4668: # OFF = logic 1 - Factory Setting
4669: # sw8 ON enables Polling Option
4670: # OFF disables Polling Option - Factory Setting
4671: #
4672: #
4673: # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
4674: #
4675: # This adm31 entry uses underline as the standout mode.
4676: # If the adm31 gives you trouble with standout mode, check the DIP switch in
4677: # position 6, bank @c11, 25% from back end of the circuit board. Should be
4678: # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
4679: # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
4680: adm31|lsi adm31 with sw6 set for underline mode,
1.11 millert 4681: OTbs, am, mir,
1.1 millert 4682: cols#80, lines#24,
4683: bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4684: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 4685: dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
4686: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
4687: kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
4688: kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
1.1 millert 4689: rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
1.11 millert 4690: adm31-old|o31|old adm31,
4691: rmul@, smso=\EG4, smul@, use=adm31,
1.1 millert 4692: # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
4693: adm36|LSI ADM36,
1.11 millert 4694: OTbs, OTpt,
1.1 millert 4695: OTkn#4,
4696: if=/usr/lib/tabset/vt100,
1.11 millert 4697: is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100,
1.1 millert 4698: # (adm42: removed obsolete ":ma=^K^P:" -- esr)
4699: adm42|lsi adm42,
4700: OTbs, am,
4701: cols#80, lines#24,
4702: bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4703: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
1.11 millert 4704: cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
4705: il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
4706: kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
4707: smir=\Eq, smul@,
4708: use=adm+sgr,
1.1 millert 4709: # The following termcap for the Lear Siegler ADM-42 leaves the
4710: # "system line" at the bottom of the screen blank (for those who
4711: # find it distracting otherwise)
1.11 millert 4712: adm42-ns|lsi adm-42 with no system line,
4713: cbt=\EI\EF \011, clear=\E;\EF \011,
4714: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
4715: dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
4716: el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
4717: smir=\Eq\EF \011,
4718: use=adm42,
1.1 millert 4719: # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
4720: # The insert mode of this terminal is commented out because it's broken for our
4721: # purposes in that it will shift the position of every character on the page,
4722: # not just the cursor line!
4723: # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
4724: adm1178|1178|lsi adm1178,
4725: am,
4726: cols#80, lines#24, xmc#1,
4727: bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
4728: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
4729: cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
4730: home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
1.11 millert 4731: kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
4732: sgr0=\E), smso=\EG4, smul=\EG1,
4733:
4734: #### Prime
4735: #
4736: # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
4737: # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
4738: # Prime merged with ComputerVision in the late 1980s; you can reach them at:
4739: #
4740: # ComputerVision Services
4741: # 500 Old Connecticut Path
4742: # Framingham, Mass.
4743: #
4744:
4745: # Standout mode is dim reverse-video.
4746: pt100|pt200|wren|fenix|prime pt100/pt200,
4747: am, bw, mir, msgr,
4748: cols#80, it#8, lines#24,
4749: cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
4750: cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
4751: cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
4752: cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[M,
4753: ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
4754: home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
4755: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
4756: rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
4757: sgr0=\E[m,
4758: smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
4759: smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
4760: pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
4761: cols#132,
4762: cup=\E[%i%p1%d;%p2%dH, use=pt100,
4763: pt250|Prime PT250,
4764: rmso@, smso@, use=pt100,
4765: pt250w|Prime PT250 in 132-column mode,
4766: rmso@, smso@, use=pt100w,
1.1 millert 4767:
4768: #### Qume (qvt)
4769: #
4770: # Qume, Inc.
4771: # 3475-A North 1st Street
4772: # San Jose CA 95134
4773: # Vox: (800)-457-4447
4774: # Fax: (408)-473-1510
4775: # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
4776: #
4777: # Qume was bought by Wyse, but still (as of early 1995) has its own support
4778: # group and production division.
4779: #
4780: # Discontinued Qume models:
4781: #
4782: # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
4783: # built to replace them, and a qvt119+ which was a 101+ with available wide
4784: # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
4785: # and an ANSI-compatible qvt203 that replaced it. Qume started producing
4786: # ANSI-compatible terminals with the qvt323 and qvt61.
4787: #
4788: # Current Qume models (as of February 1995):
4789: #
4790: # All current Qume terminals have ANSI-compatible operation modes.
4791: # Qume is still producing the qvt62, which features emulations for other
4792: # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
4793: # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
4794: # with many emulations including Wyse370, Wyse 325, etc. Their newest
4795: # model is the qvt520, which is vt420-compatible.
4796: #
4797: # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
4798: #
4799: # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
4800: # setup mode. Shift-s should be a configuration save to NVRAM.
4801:
1.11 millert 4802: qvt101|qvt108|qume qvt 101 and QVT 108,
1.1 millert 4803: xmc#1, use=qvt101+,
4804:
4805: # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
4806: # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
4807: # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
4808: # What seems to be going on here is that this entry was designed so that
4809: # the normal highlight is bold and standout is dim plus something else
4810: # (reverse-video maybe? But then, are there two <rev> sequences?)
1.11 millert 4811: qvt101+|qvt101p|qume qvt 101 PLUS product,
4812: am, bw, hs, ul,
4813: cols#80, lines#24, xmc#0,
4814: bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
4815: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
4816: dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
4817: flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
4818: ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
4819: kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
4820: kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
4821: kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
4822: khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
4823: smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef,
4824: use=adm+sgr,
4825: qvt102|qume qvt 102,
4826: cnorm=\E., use=qvt101,
1.1 millert 4827: # (qvt103: added <rmam>/<smam> based on init string -- esr)
1.11 millert 4828: qvt103|qume qvt 103,
4829: am, xenl, xon,
4830: cols#80, it#8, lines#24, vt#3,
4831: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
4832: clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4833: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
4834: cuf=\E[%p1%dC, cuf1=\E[C$<2>,
4835: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
4836: cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
4837: hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4838: kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
4839: rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
4840: rmso=\E[m$<2>, rmul=\E[m$<2>,
4841: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4842: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
4843: sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
4844: smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
4845: qvt103-w|qume qvt103 132 cols,
4846: cols#132, lines#24,
4847: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
4848: qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
4849: am, hs, mir, msgr,
4850: cols#80, lines#24, xmc#0,
4851: bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
4852: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
4853: cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
4854: el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
4855: hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
4856: kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
4857: kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
4858: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
4859: mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
4860: tbc=\E3, tsl=\Eg\Ef,
4861: use=adm+sgr,
4862: qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
4863: lines#25, use=qvt119+,
4864: qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
4865: cols#132,
4866: is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
4867: qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
1.1 millert 4868: lines#25, use=qvt119+,
4869: qvt203|qvt203+|qume qvt 203 Plus,
1.11 millert 4870: dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
4871: ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
4872: kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
4873: kf9=\E[28~, rmir=\E[4l, smir=\E[4h,
4874: use=qvt103,
4875: qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
4876: cols#132, lines#24,
4877: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
1.1 millert 4878: #
4879: # Since a command is present for enabling 25 data lines,
4880: # a specific terminfo entry may be generated for the 203.
4881: # If one is desired for the QVT 119 PLUS then 25 lines must
4882: # be selected in the status line (setup line 9).
4883: #
1.11 millert 4884: qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
4885: cols#80, lines#25,
4886: is2=\E[=40h\E[?3l, use=qvt203,
4887: qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
4888: cols#132, lines#25,
4889: rs2=\E[?3h\E[=40h, use=qvt203,
1.1 millert 4890:
4891: #### Televideo (tvi)
4892: #
4893: # TeleVideo
4894: # 550 East Brokaw Road
4895: # PO Box 49048 95161
4896: # San Jose CA 95112
4897: # Vox: (408)-954-8333
4898: # Fax: (408)-954-0623
4899: #
4900: #
4901: # There are some tvi terminals that require incredible amounts of padding and
4902: # some that don't. I'm assuming tvi912 and tvi920 are the old slow ones, and
4903: # tvi912b, tvi912c, tvi920b, tvi920c are the new ones that don't need padding.
4904: #
4905: # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
4906: # Televideo terminals are ANSI and PC-ANSI compatible.
4907:
1.11 millert 4908: tvi803|televideo 803,
4909: clear=\E*$<10>, use=tvi950,
1.1 millert 4910:
4911: # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
4912: # Switch settings are:
4913: #
4914: # S1 1 2 3 4
4915: # D D D D 9600
4916: # D D D U 50
4917: # D D U D 75
4918: # D D U U 110
4919: # D U D D 135
4920: # D U D U 150
4921: # D U U D 300
4922: # D U U U 600
4923: # U D D D 1200
4924: # U D D U 1800
4925: # U D U D 2400
4926: # U D U U 3600
4927: # U U D D 4800
4928: # U U D U 7200
4929: # U U U D 9600
4930: # U U U U 19200
4931: #
4932: # S1 5 6 7 8
4933: # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
4934: # U D X U 7N2
4935: # U U D D 7O1
4936: # U U D U 7O2
4937: # U U U D 7E1
4938: # U U U U 7E2
4939: # D D X D 8N1
4940: # D D X U 8N2
4941: # D U D D 8O1
4942: # D U U U 8E2
4943: #
4944: # S1 9 Autowrap
4945: # U on
4946: # D off
4947: #
4948: # S1 10 CR/LF
4949: # U do CR/LF when CR received
4950: # D do CR when CR received
4951: #
4952: # S2 1 Mode
4953: # U block
4954: # D conversational
4955: #
4956: # S2 2 Duplex
4957: # U half
4958: # D full
4959: #
4960: # S2 3 Hertz
4961: # U 50
4962: # D 60
4963: #
4964: # S2 4 Edit mode
4965: # U local
4966: # D duplex
4967: #
4968: # S2 5 Cursor type
4969: # U underline
4970: # D block
4971: #
4972: # S2 6 Cursor down key
4973: # U send ^J
4974: # D send ^V
4975: #
4976: # S2 7 Screen colour
4977: # U green on black
4978: # D black on green
4979: #
4980: # S2 8 DSR status (pin 6)
4981: # U disconnected
4982: # D connected
4983: #
4984: # S2 9 DCD status (pin 8)
4985: # U disconnected
4986: # D duplex
4987: #
4988: # S2 10 DTR status (pin 20)
4989: # U disconnected
4990: # D duplex
4991: # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
4992: # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
4993: tvi910|televideo model 910,
1.11 millert 4994: OTbs, am, msgr,
1.1 millert 4995: cols#80, it#8, lines#24, xmc#1,
4996: bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
1.11 millert 4997: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
4998: home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
4999: if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
5000: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
5001: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
5002: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
5003: vpa=\E[%p1%{32}%+%c, use=adm+sgr,
1.1 millert 5004: # From: Alan R. Rogers <rogers%albany@csnet-relay>
5005: # as subsequently hacked over by someone at SCO
5006: # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
5007: #
5008: # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
5009: #
5010: # S1 1 2 3 4:
5011: # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
5012: # D U D D 135 D U D U 150 D U U D 300 D U U U 600
5013: # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
5014: # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
5015: #
5016: # S1 5 6 7 8:
5017: # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
5018: # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
5019: # D U D D 8O1 D U U U 8E2
5020: #
5021: # S1 9 Autowrap (U = on, D = off)
5022: # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
5023: # S2 1 Mode (U = block, D = conversational)
5024: # S2 2 Duplex (U = half, D = full)
5025: # S2 3 Hertz (U = 50, D = 60)
5026: # S2 4 Edit mode (U = local, D = duplex)
5027: # S2 5 Cursor type (U = underline, D = block)
5028: # S2 6 Cursor down key (U = send ^J, D = send ^V)
5029: # S2 7 Screen colour (U = green on black, D = black on green)
5030: # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
5031: # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
5032: # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
5033: #
5034: tvi910+|televideo 910+,
1.11 millert 5035: dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
5036: kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
5037: kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
5038: ll=\E=7\s,
5039: use=tvi910,
1.1 millert 5040:
5041: # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
5042: # <khome> from BRL entry -- esr)
5043: tvi912|tvi914|tvi920|old televideo 912/914/920,
5044: OTbs, OTpt, am, msgr,
1.11 millert 5045: cols#80, it#8, lines#24, xmc#1,
1.1 millert 5046: bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5047: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 5048: dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
5049: ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
5050: il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
5051: kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
5052: kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
5053: kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
5054: tbc=\E3,
1.1 millert 5055: # the 912 has a <funct> key that's like shift: <funct>8 xmits "^A8\r".
5056: # The 920 has this plus real function keys that xmit different things.
5057: # Terminfo makes you use the funct key on the 912 but the real keys on the 920.
5058: tvi912c|tvi912b|new televideo 912,
1.11 millert 5059: dl1=\ER$<5*>, il1=\EE$<5*>, use=tvi912,
1.1 millert 5060: # set to page 1 when entering curses application (\E-17 )
5061: # reset to page 0 when exiting curses application (\E-07 )
5062: tvi912-2p|tvi920-2p|tvi-2p|televideo w/2 pages,
1.11 millert 5063: rmcup=\E-07\s, smcup=\E-17\s, use=tvi912,
1.1 millert 5064: # We got some new tvi912c terminals that act really weird on the regular
5065: # termcap, so one of our gurus worked this up. Seems that cursor
5066: # addressing is broken.
1.11 millert 5067: tvi912cc|tvi912 at cowell college,
5068: cup@, use=tvi912c,
1.1 millert 5069:
5070: # Here are the switch settings for the tvi920c:
5071: #
5072: # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
5073: # 2: 9600 3: 4800 4: 2400 5: 1200
5074: # 6: 600 7: 300 8: 150 9: 75
5075: # 10: 110
5076: #
5077: # S2 UART/Terminal options:
5078: # Up Down
5079: # 1: Not used Not allowed
5080: # 2: Alternate character set Standard character set
5081: # 3: Full duplex Half duplex
5082: # 4: 50 Hz refresh 60 Hz refresh
5083: # 5: No parity Send parity
5084: # 6: 2 stop bits 1 stop bit
5085: # 7: 8 data bits 7 data bits
5086: # 8: Not used Not allowed on Rev E or lower
5087: # 9: Even parity Odd parity
5088: # 10: Steady cursor Blinking cursor
5089: # (On Rev E or lower, use W25 instead of switch 10.)
5090: #
5091: # S5 UART/Terminal options:
5092: # Open Closed
5093: # 1: P3-6 Not connected DSR received on P3-6
5094: # 2: P3-8 Not connected DCD received on P3-8
5095: #
5096: # 3 Open, 4 Open: P3-20 Not connected
5097: # 3 Open, 4 Closed: DTR on when terminal is on
5098: # 3 Closed, 4 Open: DTR is connected to RTS
5099: # 3 Closed, 4 Closed: Not allowed
5100: #
5101: # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
5102: # all data transmitted out of the modem port (P3) will also be
5103: # transmitted out of the printer port (P4).
5104: #
5105: # 6 Open, 7 Open: Not allowed
5106: # 6 Open, 7 Closed: 20ma current loop input
5107: # 6 Closed, 7 Open: RS232 input
5108: # 6 Closed, 7 Closed: Not allowed
5109: #
5110: # Jumper options:
5111: # If the jumper is installed, the effect will occur (the next time the terminal
5112: # is switched on).
5113: #
5114: # S4/W31: Enables automatic LF upon receipt of CR from
5115: # remote or keyboard.
5116: # S4/W32: Enables transmission of EOT at the end of Send. If not
5117: # installed, a carriage return is sent.
5118: # S4/W33: Disables automatic carriage return in column 80.
5119: # S4/W34: Selects Page Print Mode as initial condition. If not
5120: # installed, Extension Mode is selected.
5121: #
5122: tvi920b|tvi920c|new televideo 920,
5123: dl1=\ER$<5*>, il1=\EE$<5*>, kf0=^AI\r, kf1=^A@\r,
1.11 millert 5124: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
5125: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
5126: use=tvi912,
1.1 millert 5127:
5128: # Televideo 921 and variants
5129: # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
5130: # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
5131: # also added empty <acsc> to suppress tic warning -- esr)
5132: tvi921|televideo model 921 with sysline same as page & real vi function,
5133: OTbs, OTpt, am, hs, xenl, xhp,
5134: cols#80, lines#24, xmc#0,
1.11 millert 5135: acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
5136: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
5137: cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
5138: el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
5139: if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
5140: is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
5141: kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
5142: ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%,
1.1 millert 5143: rmir=, smacs=\E$, smir=, tsl=\Ef\EG0,
1.11 millert 5144: use=adm+sgr,
1.1 millert 5145: # without the beeper
5146: # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
5147: # also added empty <acsc> to suppress tic warning -- esr)
5148: tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
5149: am, hs, xenl, xhp,
5150: cols#80, lines#24, xmc#0,
1.11 millert 5151: acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
5152: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
5153: cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
5154: el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
5155: ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
5156: invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
1.1 millert 5157: kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
1.11 millert 5158: kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
5159: nel=^M^J, rmacs=\E%, smacs=\E$, tsl=\Ef\EG0,
5160: use=adm+sgr,
1.1 millert 5161: # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
5162: tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
5163: dl1=\ER$<2*/>, il1=\EE$<2*/>,
5164: is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
5165: kil1=\EE$<2*/>,
1.11 millert 5166: use=tvi92B,
1.1 millert 5167:
5168: # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
5169: # in from a BSD termcap file because it looks like they do something the
5170: # old ones skip -- esr)
5171: tvi924|televideo tvi924,
5172: am, bw, hs, in, mir, msgr, xenl, xon,
5173: cols#80, it#8, lines#24, wsl#80, xmc#0,
1.11 millert 5174: bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
5175: cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
5176: cub1=^H, cud1=^V, cuf1=^L,
5177: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
5178: dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
5179: flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
5180: ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
5181: invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
5182: kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
5183: kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
5184: kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
5185: kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
5186: kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
5187: kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
5188: lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
5189: pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, use=adm+sgr,
1.1 millert 5190:
5191: # TVI925 DIP switches. In each of these, D = Down and U = Up,
5192: #
5193: # Here are the settings for the external (baud) switches (S1):
5194: #
5195: # Position Baud
5196: # 7 8 9 10 [Printer]
5197: # 1 2 3 4 [Main RS232]
5198: # -----------------------------------------------------
5199: # D D D D 9600
5200: # D D D U 50
5201: # D D U D 75
5202: # D D U U 110
5203: # D U D D 135
5204: # D U D U 150
5205: # D U U D 300
5206: # D U U U 600
5207: # U D D D 1200
5208: # U D D U 1800
5209: # U D U D 2400
5210: # U D U U 3600
5211: # U U D D 4800
5212: # U U D U 7200
5213: # U U U D 9600
5214: # U U U U 19200
5215: #
5216: #
5217: # Settings for word length and stop-bits (S1)
5218: #
5219: # Position Description
5220: # 5 6
5221: # ---------------------------
5222: # U - 7-bit word
5223: # D - 8-bit word
5224: # - U 2 stop bits
5225: # - D 1 stop bit
5226: #
5227: #
5228: # S2 (external) settings
5229: #
5230: # Position Up Dn Description
5231: # --------------------------------------------
5232: # 1 X Local edit
5233: # X Duplex edit (transmit editing keys)
5234: # --------------------------------------------
5235: # 2 X 912/920 emulation
5236: # X 925
5237: # --------------------------------------------
5238: # 3 X
5239: # 4 X No parity
5240: # 5 X
5241: # --------------------------------------------
5242: # 3 X
5243: # 4 X Odd parity
5244: # 5 X
5245: # --------------------------------------------
5246: # 3 X
5247: # 4 X Even parity
5248: # 5 X
5249: # --------------------------------------------
5250: # 3 X
5251: # 4 X Mark parity
5252: # 5 X
5253: # --------------------------------------------
5254: # 3 X
5255: # 4 X Space parity
5256: # 5 X
5257: # --------------------------------------------
5258: # 6 X White on black display
5259: # X Black on white display
5260: # --------------------------------------------
5261: # 7 X Half Duplex
5262: # 8 X
5263: # --------------------------------------------
5264: # 7 X Full Duplex
5265: # 8 X
5266: # --------------------------------------------
5267: # 7 X Block mode
5268: # 8 X
5269: # --------------------------------------------
5270: # 9 X 50 Hz
5271: # X 60 Hz
5272: # --------------------------------------------
5273: # 10 X CR/LF (Auto LF)
5274: # X CR only
5275: #
5276: # S3 (internal switch) settings:
5277: #
5278: # Position Up Dn Description
5279: # --------------------------------------------
5280: # 1 X Keyclick off
5281: # X Keyclick on
5282: # --------------------------------------------
5283: # 2 X English
5284: # 3 X
5285: # --------------------------------------------
5286: # 2 X German
5287: # 3 X
5288: # --------------------------------------------
5289: # 2 X French
5290: # 3 X
5291: # --------------------------------------------
5292: # 2 X Spanish
5293: # 3 X
5294: # --------------------------------------------
5295: # 4 X Blinking block cursor
5296: # 5 X
5297: # --------------------------------------------
5298: # 4 X Blinking underline cursor
5299: # 5 X
5300: # --------------------------------------------
5301: # 4 X Steady block cursor
5302: # 5 X
5303: # --------------------------------------------
5304: # 4 X Steady underline cursor
5305: # 5 X
5306: # --------------------------------------------
5307: # 6 X Screen blanking timer (ON)
5308: # X Screen blanking timer (OFF)
5309: # --------------------------------------------
5310: # 7 X Page attributes
5311: # X Line attributes
5312: # --------------------------------------------
5313: # 8 X DCD disconnected
5314: # X DCD connected
5315: # --------------------------------------------
5316: # 9 X DSR disconnected
5317: # X DSR connected
5318: # --------------------------------------------
5319: # 10 X DTR Disconnected
5320: # X DTR connected
5321: # --------------------------------------------
5322: #
5323: # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
5324: tvi925|televideo 925,
1.11 millert 5325: OTbs, am, bw, hs, ul,
1.1 millert 5326: cols#80, lines#24, xmc#1,
1.11 millert 5327: bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
5328: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
5329: cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
5330: flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
5331: ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
5332: kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
5333: ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
5334: kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
5335: kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
5336: tsl=\Eh\Ef,
5337: use=adm+sgr,
1.1 millert 5338: # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
5339: # to avoid "magic cookie" standout glitch:
5340: tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
5341: xmc@,
5342: kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
5343:
5344: # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
5345: # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
5346: # for additional capabilities,
5347: # The following tvi descriptions from B:pjphar and virus!mike
5348: # is for all 950s. It sets the following attributes:
5349: # full duplex (\EDF) write protect off (\E()
5350: # conversation mode (\EC) graphics mode off (\E%)
5351: # white on black (\Ed) auto page flip off (\Ew)
5352: # turn off status line (\Eg) clear status line (\Ef\r)
5353: # normal video (\E0) monitor mode off (\EX or \Eu)
5354: # edit mode (\Er) load blank char to space (\Ee\040)
5355: # line edit mode (\EO) enable buffer control (^O)
5356: # protect mode off (\E\047) duplex edit keys (\El)
5357: # program unshifted send key to send line all (\E016)
5358: # program shifted send key to send line unprotected (\E004)
5359: # set the following to nulls:
5360: # field delimiter (\Ex0\200\200)
5361: # line delimiter (\Ex1\200\200)
5362: # start-protected field delimiter (\Ex2\200\200)
5363: # end-protected field delimiter (\Ex3\200\200)
5364: # set end of text delimiter to carriage return/null (\Ex4\r\200)
5365: #
5366: # TVI 950 Switch Setting Reference Charts
5367: #
5368: # TABLE 1:
5369: #
5370: # S1 1 2 3 4 5 6 7 8 9 10
5371: # +-----------------------+-----+-----+-----------------------+
5372: # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
5373: # | |Bits |Bits | |
5374: # +------+-----------------------+-----+-----+-----------------------+
5375: # | Up | See | 7 | 2 | See |
5376: # +------+-----------------------+-----+-----+-----------------------+
5377: # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
5378: # +------+-----------------------+-----+-----+-----------------------+
5379: #
5380: #
5381: # S2 1 2 3 4 5 6 7 8 9 10
5382: # +-----+-----+-----------------+-----+-----------+-----+-----+
5383: # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
5384: # +------+-----+-----+-----------------+-----+-----------+-----+-----+
5385: # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
5386: # +------+-----+-----+-----------------+-----+-----------+-----+-----+
5387: # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
5388: # +------+-----+-----+-----------------+-----+-----------+-----+-----+
5389: #
5390: # TABLE 2:
5391: #
5392: # +-----------+-----+-----+-----+-----+-----------+
5393: # | Display | 1 | 2 | 3 | 4 | Baud |
5394: # +-----------+-----+-----+-----+-----+ |
5395: # | Printer | 7 | 8 | 9 | 10 | Rate |
5396: # +-----------+-----+-----+-----+-----+-----------+
5397: # | D | D | D | D | 9600 |
5398: # | U | D | D | D | 50 |
5399: # | D | U | D | D | 75 |
5400: # | U | U | D | D | 110 |
5401: # | D | D | U | D | 135 |
5402: # | U | D | U | D | 150 |
5403: # | D | U | U | D | 300 |
5404: # | U | U | U | D | 600 |
5405: # | D | D | D | U | 1200 |
5406: # | U | D | D | U | 1800 |
5407: # | D | U | D | U | 2400 |
5408: # | U | U | D | U | 3600 |
5409: # | D | D | U | U | 4800 |
5410: # | U | D | U | U | 7200 |
5411: # | D | U | U | U | 9600 |
5412: # | U | U | U | U | 19200 |
5413: # +-----+-----+-----+-----+-----------+
5414: #
5415: # TABLE 3:
5416: # +-----+-----+-----+-----------+
5417: # | 3 | 4 | 5 | Parity |
5418: # +-----+-----+-----+-----------+
5419: # | X | X | D | None |
5420: # | D | D | U | Odd |
5421: # | D | U | U | Even |
5422: # | U | D | U | Mark |
5423: # | U | U | U | Space |
5424: # +-----+-----+-----+-----------+
5425: # X = don't care
5426: #
5427: # CHART:
5428: # +-----+-----+-----------------+
5429: # | 7 | 8 | Communication |
5430: # +-----+-----+-----------------+
5431: # | D | D | Half Duplex |
5432: # | D | U | Full Duplex |
5433: # | U | D | Block |
5434: # | U | U | Local |
5435: # +-----+-----+-----------------+
5436: #
5437: # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
5438: # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
5439: # should be present and all tvi native modes use the same string for this.
5440: # Finally, note that BSD has cud1=^V. -- esr)
1.11 millert 5441: tvi950|televideo 950,
5442: OTbs, am, hs, mir, msgr, xenl, xon,
5443: cols#80, it#8, lines#24, xmc#1,
5444: acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
5445: cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5446: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
5447: dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
5448: fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
5449: invis@,
5450: is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
5451: kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
5452: kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
5453: kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
5454: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
5455: kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
5456: rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
5457: use=adm+sgr,
1.1 millert 5458: #
5459: # is for 950 with two pages adds the following:
5460: # set 48 line page (\E\\2)
5461: # place cursor at page 0, line 24, column 1 (\E-07 )
5462: # set local (no send) edit keys (\Ek)
5463: #
5464: # two page 950 adds the following:
5465: # when entering ex, set 24 line page (\E\\1)
5466: # when exiting ex, reset 48 line page (\E\\2)
5467: # place cursor at 0,24,1 (\E-07 )
5468: # set duplex (send) edit keys (\El) when entering vi
5469: # set local (no send) edit keys (\Ek) when exiting vi
5470: #
1.11 millert 5471: tvi950-2p|televideo950 w/2 pages,
5472: is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
5473: rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
5474: smkx=\El,
5475: use=tvi950,
1.1 millert 5476: #
5477: # is for 950 with four pages adds the following:
5478: # set 96 line page (\E\\3)
5479: # place cursor at page 0, line 24, column 1 (\E-07 )
5480: #
5481: # four page 950 adds the following:
5482: # when entering ex, set 24 line page (\E\\1)
5483: # when exiting ex, reset 96 line page (\E\\3)
5484: # place cursor at 0,24,1 (\E-07 )
5485: #
1.11 millert 5486: tvi950-4p|televideo950 w/4 pages,
5487: is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
5488: rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
5489: smkx=\El,
5490: use=tvi950,
1.1 millert 5491: #
5492: # <is2> for reverse video 950 changes the following:
5493: # set reverse video (\Ed)
5494: #
5495: # set vb accordingly (\Ed ...delay... \Eb)
5496: #
1.11 millert 5497: tvi950-rv|televideo950 rev video,
5498: flash=\Ed$<200/>\Eb,
5499: is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0, use=tvi950,
1.1 millert 5500:
5501: # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
1.11 millert 5502: tvi950-rv-2p|televideo950 rev video w/2 pages,
5503: flash=\Ed$<200/>\Eb,
5504: is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
5505: rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
5506: smkx=\El,
5507: use=tvi950,
1.1 millert 5508:
5509: # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
1.11 millert 5510: tvi950-rv-4p|televideo950 rev video w/4 pages,
5511: flash=\Ed$<200/>\Eb,
5512: is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
5513: rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
5514: smkx=\El,
5515: use=tvi950,
1.1 millert 5516: # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
5517: # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
5518: # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
5519: # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
5520: # the :ko: string had :cl: in it, which means that one of the original
5521: # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
5522: # the 950 has. Finally, corrected the <kel> string to match the 950 and what
5523: # ko implies -- esr)
5524: # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
5525: # also work.
5526: tvi955|televideo 955,
1.11 millert 5527: OTbs, mc5i, msgr@,
1.1 millert 5528: it#8, xmc@,
1.11 millert 5529: acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
5530: civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
1.1 millert 5531: cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
1.11 millert 5532: is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
5533: knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
5534: rmam=\E[=7l, rmxon=^N,
1.1 millert 5535: rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
5536: sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
1.11 millert 5537: use=tvi950,
1.1 millert 5538: tvi955-w|955-w|televideo955 w/132 cols,
5539: cols#132,
1.11 millert 5540: is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
1.1 millert 5541: # use half-intensity as normal mode, full intensity as <bold>
5542: tvi955-hb|955-hb|televideo955 half-bright,
1.11 millert 5543: bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
5544: sgr0=\EG0\E[=5h,
5545: use=tvi955,
1.1 millert 5546: # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
5547: # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
5548: # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
5549: # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
5550: # it does to the function keys. I deduced <rmam>/<smam>.
5551: # also added empty <acsc> to suppress tic warning, -- esr)
5552: tvi970|televideo 970,
5553: OTbs, OTpt, am, da, db, mir, msgr,
5554: cols#80, it#8, lines#24,
1.11 millert 5555: acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
5556: cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
5557: cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
5558: ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
5559: hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
5560: is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
5561: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5562: kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
5563: kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
5564: rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
5565: sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
5566: smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
5567: smul=\E[4m, vpa=\E[%i%p1%dd,
1.1 millert 5568: tvi970-vb|televideo 970 with visual bell,
1.11 millert 5569: flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, use=tvi970,
1.1 millert 5570: tvi970-2p|televideo 970 with using 2 pages of memory,
1.11 millert 5571: rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
1.1 millert 5572: use=tvi970,
5573: # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
5574: # per line (rather than 40), Esc K chooses the normal character set. Not sure
5575: # padding is needed, but adapted from the tvi920c termcap. The <smso> and
5576: # <smul> strings are klutzy, but at least use no screen space.
5577: # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
5578: # its absence means <smam>=\Ev isn't safe to use. -- esr)
5579: # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
5580: # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
5581: # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
5582: tvipt|televideo personal terminal,
5583: OTbs, am,
5584: cols#80, lines#24,
5585: cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
1.11 millert 5586: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
5587: ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
5588: il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
5589: kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
5590: rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
1.1 millert 5591: # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
1.11 millert 5592: tvi9065|televideo 9065,
5593: am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
5594: cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
5595: wnum#0, wsl#30,
5596: acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
5597: blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
5598: cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
5599: cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
5600: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
5601: cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
5602: dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
5603: el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
5604: ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
5605: il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
5606: ip=$<3>,
5607: is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
5608: is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
5609: kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
5610: kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
5611: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
5612: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
5613: mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
5614: pfkey=\E|%p1%{48}%+%c3%p2%s\031,
5615: pfloc=\E|%p1%{48}%+%c2%p2%s\031,
5616: pfx=\E|%p1%{48}%+%c1%p2%s\031,
5617: pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
5618: rep=\E[%p2%db%p1%c, rev=\EG4,
5619: rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
5620: rmacs=\E%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
5621: rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
5622: rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
5623: rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
5624: rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
5625: sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
5626: sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
5627: smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
5628: tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
1.1 millert 5629:
5630: #### Visual (vi)
5631: #
5632: # In September 1993, Visual Technology of Westboro, Massachusetts,
5633: # merged with White Pine Software of Nashua, New Hampshire.
5634: #
5635: # White Pine Software may be contacted at +1 603/886-9050.
5636: # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
5637: #
5638:
5639: # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
5640: # Recently I hacked together the following termcap for Visual
5641: # Technology's Visual 50 terminal. It's a slight modification of
5642: # the vt52 termcap.
5643: # It's intended to run when the Visual 50 is in vt52 emulation mode
5644: # (I know what you're thinking; if it's emulating a vt52, then why
5645: # another termcap? Well, it turns out that the Visual 50 can handle
5646: # <dl1> and db(?) among other things, which the vt52 can't)
5647: # The termcap works OK for the most part. The only problem is on
5648: # character inserts. The whole line gets painfully redrawn for each
5649: # character typed. Any suggestions?
5650: # Beau's entry is combined with the vi50 entry from University of Wisconsin.
5651: # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
5652: # disguise; <kf7>-<kf9> are really l1-l3.
5653: vi50|visual 50,
5654: OTbs, OTpt, am, da, db, msgr,
5655: cols#80, it#8, lines#24,
1.11 millert 5656: OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
5657: cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
5658: cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
5659: ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
5660: kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
5661: kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
5662: nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
1.1 millert 5663: # this one was BSD & SCO's vi50
5664: vi50adm|visual 50 in adm3a mode,
5665: am, msgr,
5666: cols#80, it#8, lines#24,
5667: bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5668: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
5669: ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
1.11 millert 5670: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
5671: rmso=\ET, smso=\EU,
1.14 millert 5672: # From: Jeff Siegal <jbs@quiotix.com>
1.1 millert 5673: vi55|Visual 55,
1.11 millert 5674: OTbs, am, mir, msgr,
1.1 millert 5675: cols#80, it#8, lines#24,
1.11 millert 5676: clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
1.1 millert 5677: cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
1.11 millert 5678: cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
5679: il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
5680: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
5681: smir=\Ea, smso=\EU,
1.1 millert 5682:
5683: # Visual 200 from BRL
5684: # The following switch settings are assumed for normal operation:
5685: # FULL_DUPLEX SCROLL CR
5686: # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
5687: # Other switches may be set for operator convenience or communication
5688: # requirements.
5689: # Character insertion is kludged in order to get around the "beep" misfeature.
5690: # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
5691: # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
5692: # and <dl1> strings, but we seem to get along fine without them.
5693: vi200|visual 200,
5694: OTbs, OTpt, am, mir, msgr,
5695: OTkn#10, cols#80, it#8, lines#24,
5696: acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
5697: cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
5698: cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
1.11 millert 5699: el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
5700: kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5701: kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
5702: kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
5703: kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
5704: kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
5705: rmacs=\EG, rmkx=\E>, rmso=\E3,
5706: rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
5707: smkx=\E=, smso=\E4, tbc=\Eg,
1.1 millert 5708: # The older Visuals didn't come with function keys. This entry uses
5709: # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
5710: # If your version of vi doesn't support function keys you may want
5711: # to use vi200-f.
5712: vi200-f|visual 200 no function keys,
5713: is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
1.11 millert 5714: kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
5715: kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
5716: use=vi200,
1.1 millert 5717: vi200-rv|visual 200 reverse video,
1.11 millert 5718: cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
1.1 millert 5719:
5720: # the function keys are programmable but we don't reprogram them to their
5721: # default values with <is2> because programming them is very verbose. maybe
5722: # an initialization file should be made for the 300 and they could be stuck
5723: # in it.
5724: # (vi300: added <rmam>/<smam> based on init string -- esr)
1.11 millert 5725: vi300|visual 300 ansi x3.64,
5726: am, bw, mir, xenl,
5727: cols#80, lines#24,
5728: bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
5729: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5730: dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
5731: il1=\E[L, ind=^J,
5732: is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
5733: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5734: kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
5735: kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
5736: kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
5737: rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
5738: smso=\E[1m, smul=\E[4m,
1.1 millert 5739: # some of the vi300s have older firmware that has the command
5740: # sequence for setting editing extent reversed.
1.11 millert 5741: vi300-old|visual 300 with old firmware (set edit extent reversed),
5742: is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
5743: use=vi300,
1.1 millert 5744:
5745: # Visual 500 prototype entry from University of Wisconsin.
5746: # The best place to look for the escape sequences is page A1-1 of the
5747: # Visual 500 manual. The initialization sequence given here may be
5748: # overkill, but it does leave out some of the initializations which can
5749: # be done with the menus in set-up mode.
5750: # The :xp: line below is so that emacs can understand the padding requirements
5751: # of this slow terminal. :xp: is 10 time the padding factor.
5752: # (vi500: removed unknown :xp#4: termcap;
5753: # also added empty <acsc> to suppress tic warning -- esr)
5754: vi500|visual 500,
5755: am, mir, msgr,
5756: cols#80, it#8, lines#33,
5757: acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
5758: csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
1.11 millert 5759: cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
5760: dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
5761: el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
5762: ind=^J,
1.1 millert 5763: is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
5764: kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
5765: khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
1.11 millert 5766: rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
1.1 millert 5767:
5768: # The visual 550 is a visual 300 with tektronix graphics,
5769: # and with 33 lines. clear screen is modified here to
5770: # also clear the graphics.
1.11 millert 5771: vi550|visual 550 ansi x3.64,
5772: lines#33,
5773: clear=\030\E[H\E[2J, use=vi300,
1.1 millert 5774:
5775: vi603|visual603|visual 603,
5776: hs, mir,
1.11 millert 5777: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
5778: csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
5779: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
5780: dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
5781: ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
5782: rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
5783: sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
5784: use=vt100,
1.1 millert 5785:
5786: #### Wyse (wy)
5787: #
5788: # Wyse Technology
5789: # 3471 North First Street
5790: # San Jose, CA 95134
5791: # Vox: (408)-473-1200
5792: # Fax: (408) 473-1222
5793: # Web: http://www.wyse.com
5794: #
5795: # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
5796: # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
5797: # obvious address, <http://www.wyse.com>. They keep terminfo entries at
5798: # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
5799: #
5800: # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
5801: # They now own the Qume and Amdek brands, too. So these are the people to
5802: # talk with about all Link, Qume, and Amdek terminals.
5803: #
5804: # These entries include a few small fixes.
5805: # I canceled the bel capacities in the vb entries.
5806: # I made two trivial syntax fixes in the wyse30 entry.
5807: # I made some entries relative to adm+sgr.
5808: #
5809: #
5810: # Note: The wyse75, wyse85, and wyse99 have been discontinued.
5811:
5812: # Although the Wyse 30 can support more than one attribute
5813: # it requires magic cookies to do so. Many applications do not
5814: # function well with magic cookies. The following terminfo uses
5815: # the protect mode to support one attribute (dim) without cookies.
5816: # If more than one attribute is needed then the wy30-mc terminfo
5817: # should be used.
5818: #
5819: wy30|wyse30|Wyse 30,
5820: am, bw, hs, mc5i, mir, msgr, xon,
5821: cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
5822: acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
5823: civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
5824: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
5825: cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
5826: dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
5827: fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
5828: ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
5829: kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
5830: kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
5831: kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
5832: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
5833: kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
1.11 millert 5834: mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
5835: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
1.1 millert 5836: rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
5837: sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
5838: sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
5839: smso=\E`7\E), tbc=\E0, tsl=\EF,
5840: #
5841: # This terminal description uses the non-hidden attribute mode
5842: # (with magic cookie).
5843: #
5844: # (wy30-mc: added <smcup> to suppress tic warning --esr)
5845: wy30-mc|wyse30-mc|wyse 30 with magic cookies,
5846: msgr@,
5847: ma@, xmc#1,
5848: blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
5849: rmcup=\EG0, rmso=\EG0,
1.11 millert 5850: sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
1.1 millert 5851: sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
5852: smso=\EG4, use=wy30,
5853: use=adm+sgr,
5854: # The mandatory pause used by <flash> does not work with
5855: # older versions of terminfo. If you see this effect then
5856: # unset xon and delete the / from the delay.
5857: # i.e. change $<100/> to $<100>
5858: wy30-vb|wyse30-vb|wyse 30 visible bell,
5859: bel@, use=wy30,
5860: #
5861: # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
5862: # Normal) without magic cookies by using the protect mode.
5863: # The following description uses this feature, but when more
5864: # than one attribute is put on the screen at once, all attributes
5865: # will be changed to be the same as the last attribute given.
5866: # The Wyse 50 can support more attributes when used with magic
5867: # cookies. The wy50-mc terminal description uses magic cookies
5868: # to correctly handle multiple attributes on a screen.
5869: #
5870: wy50|wyse50|Wyse 50,
5871: am, bw, hs, mc5i, mir, msgr, xon,
5872: cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
5873: acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
5874: civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
5875: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
5876: cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
5877: ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
5878: home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
5879: is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
5880: kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
5881: kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
5882: kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
5883: kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
5884: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
5885: kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
5886: ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
1.11 millert 5887: pfx=\Ez%p1%{63}%+%c%p2%s\177,
5888: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
1.1 millert 5889: ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
5890: sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
5891: sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
5892: smso=\E`6\E), tbc=\E0, tsl=\EF,
5893: #
5894: # This terminal description uses the non-hidden attribute mode
5895: # (with magic cookie).
5896: #
5897: # The mandatory pause used by flash does not work with some
5898: # older versions of terminfo. If you see this effect then
5899: # unset <xon> and delete the / from the delay.
5900: # i.e. change $<100/> to $<100>
5901: # (wy50-mc: added <smcup> to suppress tic warning --esr)
5902: wy50-mc|wyse50-mc|wyse 50 with magic cookies,
5903: msgr@,
5904: ma@, xmc#1,
5905: blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
5906: rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
1.11 millert 5907: sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
1.1 millert 5908: sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
5909: smso=\EGt, use=wy50,
5910: use=adm+sgr,
5911: wy50-vb|wyse50-vb|wyse 50 visible bell,
5912: bel@, use=wy50,
5913: wy50-w|wyse50-w|wyse 50 132-column,
5914: cols#132, lw#7, nlab#16, wsl#97,
5915: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy50,
5916: wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
5917: bel@,
5918: use=wy50-w,
1.11 millert 5919:
1.1 millert 5920: #
5921: # The Wyse 350 is a Wyse 50 with color.
5922: # Unfortunately this means that it has magic cookies.
5923: # The color attributes are designed to overlap the reverse, dim and
5924: # underline attributes. This is nice for monochrome applications
5925: # because you can make underline stuff green (or any other color)
5926: # but for true color applications it's not so hot because you cannot
5927: # mix color with reverse, dim or underline.
5928: # To further complicate things one of the attributes must be
5929: # black (either the foreground or the background). In reverse video
5930: # the background changes color with black letters. In normal video
5931: # the foreground changes colors on a black background.
5932: # This terminfo uses some of the more advanced features of curses
5933: # to display both color and blink. In the final analysis I am not
5934: # sure that the wy350 runs better with this terminfo than it does
5935: # with the wy50 terminfo (with user adjusted colors).
5936: #
5937: # The mandatory pause used by flash does not work with
5938: # older versions of terminfo. If you see this effect then
5939: # unset xon and delete the / from the delay.
5940: # i.e. change $<100/> to $<100>
5941: #
5942: # Bug: The <op> capability resets attributes.
5943: wy350|wyse350|Wyse 350,
5944: am, bw, hs, mc5i, mir, xon,
5945: colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
5946: wsl#45, xmc#1,
5947: acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
5948: cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
5949: cub1=^H, cud1=^J, cuf1=^L,
5950: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
5951: dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
5952: flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
5953: il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
5954: is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
5955: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
5956: ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
5957: kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
5958: kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
5959: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
5960: kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
5961: ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
1.11 millert 5962: pfx=\Ez%p1%{63}%+%c%p2%s\177,
5963: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
1.1 millert 5964: rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
1.11 millert 5965: setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
5966: sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
1.1 millert 5967: sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
5968: smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF,
5969: use=adm+sgr,
5970: wy350-vb|wyse350-vb|wyse 350 visible bell,
5971: bel@, use=wy350,
5972: wy350-w|wyse350-w|wyse 350 132-column,
5973: cols#132, lw#7, nlab#16, wsl#97,
5974: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy350,
5975: wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
5976: bel@,
5977: use=wy350-w,
5978: #
5979: # This terminfo description is untested.
5980: # The wyse100 emulates an adm31, so the adm31 entry should work.
5981: #
5982: wy100|wyse 100,
5983: hs, mir,
5984: cols#80, lines#24, xmc#1,
5985: bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5986: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
5987: dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
5988: invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
5989: kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
5990: kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
5991: rmir=\Er, smir=\Eq, tsl=\EF,
5992: use=adm+sgr,
5993: #
5994: # The Wyse 120/150 has most of the features of the Wyse 60.
5995: # This terminal does not need padding up to 9600 baud!
5996: # <msgr> should be set but the clear screen fails when in
5997: # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
5998: # then set <msgr>.
5999: #
6000: wy120|wyse120|wy150|wyse150|Wyse 120/150,
6001: am, bw, hs, km, mc5i, mir, msgr, xon,
6002: cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
6003: acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
6004: bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
6005: cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6006: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
6007: dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
6008: flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
6009: hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
6010: is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
6011: is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
6012: kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
6013: kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
6014: kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
6015: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6016: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
6017: kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
6018: mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
1.11 millert 6019: pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
6020: pfx=\EZ1%p1%{63}%+%c%p2%s\177,
6021: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
1.1 millert 6022: rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
6023: rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
6024: rs3=\EwG\Ee($<100>,
1.11 millert 6025: sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
1.1 millert 6026: sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
6027: smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
6028: tbc=\E0, tsl=\EF,
6029: use=adm+sgr,
6030: #
6031: wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
6032: cols#132, lw#7, nlab#16, wsl#97,
6033: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
6034: rs2=\E`;$<70>, use=wy120,
6035: #
6036: wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
6037: lh@, lines#25, lw@, nlab@,
6038: pln@, rs3=\EwG\Ee)$<100>, use=wy120,
6039: #
6040: wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
6041: lh@, lines#25, lw@, nlab@,
6042: pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
6043: #
6044: wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
6045: bel@,
6046: use=wy120,
6047: #
6048: wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
6049: bel@,
6050: use=wy120-w,
6051: #
6052: # The Wyse 60 is like the Wyse 50 but with more padding.
6053: # The reset strings are slow and the pad times very depending
6054: # on other parameters such as font loading. I have tried
6055: # to follow the following outline:
6056: #
6057: # <rs1> -> set personality
6058: # <rs2> -> set number of columns
6059: # <rs3> -> set number of lines
6060: # <is1> -> select the proper font
6061: # <is2> -> do the initialization
6062: # <is3> -> set up display memory (2 pages)
6063: #
6064: # The Wyse 60's that have vt100 emulation are slower than the
6065: # older Wyse 60's. This change happened mid-1987.
6066: # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
6067: #
6068: # The meta key is only half right. This terminal will return the
6069: # high order bit set when you hit CTRL-function_key
6070: #
6071: # It may be useful to assign two function keys with the
6072: # values \E=(\s look at old data in page 1
6073: # \E=W, look at bottom of page 1
6074: # where \s is a space ( ).
6075: #
6076: # Note:
6077: # The Wyse 60 runs faster when the XON/XOFF
6078: # handshake is turned off.
6079: #
6080: # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
6081: # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
6082: wy60|wyse60|Wyse 60,
6083: am, bw, hs, km, mc5i, mir, msgr,
6084: cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
6085: acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
6086: bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
6087: cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6088: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6089: dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
6090: ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
6091: home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
6092: ip=$<3>, is1=\EcB0\EcC1,
6093: is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
6094: is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
6095: kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
6096: kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
6097: kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
6098: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6099: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
6100: kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
6101: mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
1.11 millert 6102: pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
6103: pfx=\EZ1%p1%{63}%+%c%p2%s\177,
6104: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
1.1 millert 6105: rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
6106: rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
6107: rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
1.11 millert 6108: sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
1.1 millert 6109: sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
6110: smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
6111: tbc=\E0, tsl=\EF,
6112: use=adm+sgr,
6113: #
6114: wy60-w|wyse60-w|wyse 60 132-column,
6115: cols#132, lw#7, nlab#16, wsl#97,
6116: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
6117: rs2=\EeF$<150>\E`;$<150>, use=wy60,
6118: #
6119: wy60-25|wyse60-25|wyse 60 80-column 25-lines,
6120: lh@, lines#25, lw@, nlab@,
6121: pln@, rs3=\EwG\Ee)$<200>, use=wy60,
6122: wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
6123: lh@, lines#25, lw@, nlab@,
6124: pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
6125: #
6126: wy60-42|wyse60-42|wyse 60 80-column 42-lines,
6127: lines#42,
6128: clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
6129: dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
6130: ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
6131: ri=\Ej$<10>, rs3=\Ee*$<150>,
6132: use=wy60,
6133: wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
6134: cols#132, lw#7, nlab#16, wsl#97,
6135: clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
6136: dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
6137: nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>,
6138: use=wy60-42,
6139: #
6140: wy60-43|wyse60-43|wyse 60 80-column 43-lines,
6141: lh@, lines#43, lw@, nlab@,
6142: pln@, rs3=\Ee+$<150>, use=wy60-42,
6143: wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
6144: lh@, lines#43, lw@, nlab@,
6145: pln@, rs3=\Ee+$<150>, use=wy60-42-w,
6146: #
6147: wy60-vb|wyse60-vb|Wyse 60 visible bell,
6148: bel@, use=wy60,
6149: wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
6150: bel@,
6151: use=wy60-w,
6152:
6153: # The Wyse-99GT looks at lot like the Wyse 60 except that it
6154: # does not have the 42/43 line mode. In the Wyse-60 the "lines"
6155: # setup parameter controls the number of lines on the screen.
6156: # For the Wyse 99GT the "lines" setup parameter controls the
6157: # number of lines in a page. The screen can display 25 lines max.
6158: # The Wyse-99GT also has personalities for the VT220 and
6159: # Tektronix 4014. But this has no bearing on the native mode.
6160: #
6161: # (msgr) should be set but the clear screen fails when in
6162: # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
6163: # then set msgr, else use msgr@.
6164: #
6165: # u0 -> enter Tektronix mode
6166: # u1 -> exit Tektronix mode
6167: #
6168: wy99gt|wyse99gt|Wyse 99gt,
6169: msgr@,
6170: clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
6171: el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
6172: il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
6173: ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
6174: u0=\E~>\E8, u1=\E[42h,
6175: use=wy60,
6176: #
6177: wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
6178: cols#132, lw#7, nlab#16, wsl#97,
6179: clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
6180: dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, use=wy99gt,
6181: #
6182: wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
6183: lh@, lines#25, lw@, nlab@,
6184: pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
6185: #
6186: wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
6187: lh@, lines#25, lw@, nlab@,
6188: pln@, rs2=\E`;$<150>, use=wy99gt-w,
6189: #
6190: wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
6191: bel@, use=wy99gt,
6192: #
6193: wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
6194: bel@,
6195: use=wy99gt-w,
1.11 millert 6196:
6197: # Can't set tabs! Other bugs (ANSI mode only):
6198: # - can't redefine function keys (anyway, key redefinition in ANSI mode
6199: # is too much complex to be described);
6200: # - meta key can't be described (the terminal forgets it when reset);
6201: # The xon-xoff handshaking can't be disabled while in ansi personality, so
6202: # emacs can't work at speed greater than 9600 baud. No padding is needed at
6203: # this speed.
6204: # dch1 has been commented out because it causes annoying glittering when
6205: # vi deletes one character at the beginning of a line with tabs in it.
6206: # dch makes sysgen(1M) have a horrible behaviour when deleting
6207: # a screen and makes screen(1) behave badly, so it is disabled too. The nice
6208: # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
6209: # not, so smir and rmir are commented out as well.
6210: # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
6211: wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
6212: am, km, mc5i, mir, msgr, xenl,
6213: cols#80, it#8, lines#25, vt#3,
6214: acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
6215: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6216: clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
6217: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
6218: cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
6219: cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
6220: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6221: cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
6222: ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
6223: enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
6224: hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
6225: il1=\E[L, ind=\n$<1>, invis=\E[8m,
6226: is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
6227: kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6228: kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
6229: kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
6230: kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
6231: kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
6232: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
6233: mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
6234: rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
6235: rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
6236: rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
6237: sc=\E7,
6238: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
6239: sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
6240: smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
6241:
6242: # This is the american terminal. Here tabs work fine.
6243: # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
6244: wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
6245: hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g,
6246: use=wy99-ansi,
6247:
6248: # This terminal (firmware version 02) has a lot of bugs:
6249: # - can't set tabs;
6250: # - other bugs in ANSI modes (see above).
6251: # This description disables handshaking when using cup. This is because
6252: # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
6253: # cannot be used at speeds greater than 9600 baud, because at greater
6254: # speeds handshaking is needed even for character sending. If you use
6255: # DTR handshaking, you can use even greater speeds.
6256: # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
6257: wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
6258: am, bw, hs, km, mc5i, mir, msgr, xon,
6259: cols#80, it#8, lines#25, wsl#46,
6260: acsc='x+y.wI~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
6261: blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
6262: cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
6263: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6264: cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
6265: ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
6266: flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
6267: ind=^J, invis=\EG3,
6268: is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
6269: ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
6270: kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
6271: kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
6272: kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
6273: kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
6274: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6275: kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
6276: nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
6277: rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
6278: rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
6279: sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
6280: sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
6281: smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
6282:
6283: # This is the american terminal. Here tabs work.
6284: # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
6285: wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
6286: hts=\E1, tbc=\E0,
6287: use=wy99f,
6288:
1.1 millert 6289: #
6290: # The Wyse 160 is combination of the WY-60 and the WY-99gt.
6291: # The reset strings are slow and the pad times very depending
6292: # on other parameters such as font loading. I have tried
6293: # to follow the following outline:
6294: #
6295: # <rs1> -> set personality
6296: # <rs2> -> set number of columns
6297: # <rs3> -> set number of lines
6298: # <is1> -> select the proper font
6299: # <is2> -> do the initialization
6300: # <is3> -> set up display memory (2 pages)
6301: #
6302: # The display memory may be used for either text or graphics.
6303: # When "Display Memory = Shared" the terminal will have more pages
6304: # but garbage may be left on the screen when you switch from
6305: # graphics to text. If "Display Memory = Unshared" then the
6306: # text area will be only one page long.
6307: #
6308: # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
6309: # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
6310: wy160|wyse160|Wyse 160,
6311: am, bw, hs, km, mc5i, mir, msgr,
6312: cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
6313: acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
6314: bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
6315: cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6316: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
6317: dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
6318: el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
6319: hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
6320: is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
6321: is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
6322: kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
6323: kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
6324: kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
6325: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6326: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
6327: kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
6328: mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
1.11 millert 6329: pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
6330: pfx=\EZ1%p1%{63}%+%c%p2%s\177,
6331: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
1.1 millert 6332: rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
6333: rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
6334: rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
1.11 millert 6335: sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
1.1 millert 6336: sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
6337: smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
6338: tbc=\E0, tsl=\EF,
6339: use=adm+sgr,
6340: #
6341: wy160-w|wyse160-w|wyse 160 132-column,
6342: cols#132, lw#7, nlab#16, wsl#90,
6343: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
6344: rs2=\EeF$<150>\E`;$<150>, use=wy160,
6345: #
6346: wy160-25|wyse160-25|wyse 160 80-column 25-lines,
6347: lh@, lines#25, lw@, nlab@,
6348: pln@, rs3=\EwG\Ee)$<200>, use=wy160,
6349: wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
6350: lh@, lines#25, lw@, nlab@,
6351: pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
6352: #
6353: wy160-42|wyse160-42|wyse 160 80-column 42-lines,
6354: lines#42,
6355: clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
6356: ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
6357: rs3=\Ee*$<150>,
6358: use=wy160,
6359: wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
6360: cols#132, lw#7, nlab#16, wsl#90,
6361: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
6362: rs2=\EeF$<150>\E`;$<150>,
6363: use=wy160-42,
6364: #
6365: wy160-43|wyse160-43|wyse 160 80-column 43-lines,
6366: lh@, lines#43, lw@, nlab@,
6367: pln@, rs3=\Ee+$<150>, use=wy160-42,
6368: wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
6369: lh@, lines#43, lw@, nlab@,
6370: pln@, rs3=\Ee+$<150>, use=wy160-42-w,
6371: #
6372: wy160-vb|wyse160-vb|Wyse 160 visible bell,
6373: bel@, use=wy160,
6374: wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
6375: bel@,
6376: use=wy160-w,
6377: #
6378: # The Wyse 75 is a vt100 lookalike without advanced video.
6379: #
6380: # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
6381: # Underline) without magic cookies. The following description
6382: # uses this capability, but when more than one attribute is
6383: # put on the screen at once, all attributes will be changed
6384: # to be the same as the last attribute given.
6385: # The Wyse 75 can support more attributes when used with magic
6386: # cookies. The wy75-mc terminal description uses magic cookies
6387: # to correctly handle multiple attributes on a screen.
6388: #
6389: wy75|wyse75|wyse 75,
6390: am, hs, mc5i, mir, msgr, xenl, xon,
6391: cols#80, lines#24, ma#1, pb#1201, wsl#78,
6392: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6393: bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
6394: cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
6395: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
6396: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6397: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
6398: dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
6399: dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
6400: ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
6401: enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
6402: home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
6403: ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
6404: ind=\n$<2>, ip=$<1>,
6405: is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
6406: is2=\E>\E(B\E)0\017, is3=\E[m, ka1=\EOw, ka3=\EOy,
6407: kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
6408: kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, kent=\EOM,
6409: kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6410: kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6411: kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
6412: kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
6413: kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
6414: khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
6415: kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
6416: mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
6417: rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
6418: rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
6419: sc=\E7,
6420: sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
6421: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6422: smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
6423: tbc=\E[3g, tsl=\E[>\,\001,
6424: #
6425: # This terminal description uses the non-hidden attribute mode
6426: # (with magic cookie).
6427: #
6428: wy75-mc|wyse75-mc|wyse 75 with magic cookies,
6429: msgr@,
6430: ma@, xmc#1,
6431: blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
6432: rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
6433: sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
6434: sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
6435: use=wy75,
6436: wy75-vb|wyse75-vb|wyse 75 with visible bell,
6437: pb@,
6438: bel@, use=wy75,
6439: wy75-w|wyse75-w|wyse 75 in 132 column mode,
6440: cols#132, wsl#130,
6441: rs2=\E[35h\E[?3h$<80>, use=wy75,
6442: wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
6443: pb@,
6444: bel@, use=wy75-w,
6445: #
6446: # Wyse 85 emulating a vt220 7 bit mode.
6447: # 24 line screen with status line.
6448: #
6449: # The vt220 mode permits more function keys but it wipes out
6450: # the escape key. I strongly recommend that <f11> be set to
6451: # escape (esc).
6452: # The terminal may have to be set for 8 data bits and 2 stop
6453: # bits for the arrow keys to work.
6454: # The Wyse 85 runs faster with XON/XOFF enabled. Also the
6455: # <dch> and <ich> work best when XON/XOFF is set. <ich> and
6456: # <dch> leave trash on the screen when used without XON/XOFF.
6457: #
6458: wy85|wyse85|wyse 85,
6459: am, hs, mc5i, mir, msgr, xenl, xon,
6460: cols#80, it#8, lines#24, wsl#80,
6461: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6462: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6463: clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
6464: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6465: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6466: cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
6467: dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
6468: dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
6469: ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
6470: enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
6471: fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
6472: ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
6473: ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
6474: is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
6475: is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
6476: kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
6477: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf1=\EOP,
6478: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6479: kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6480: kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
6481: kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6482: kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
6483: knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
6484: lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
6485: ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
6486: rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p,
6487: rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7,
6488: sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6489: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6490: smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6491: tsl=\E[40h\E7\E[25;%i%p1%dH,
6492: #
6493: # Wyse 85 with visual bell.
6494: wy85-vb|wyse85-vb|wyse 85 with visible bell,
6495: bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
6496: #
6497: # Wyse 85 in 132-column mode.
6498: wy85-w|wyse85-w|wyse 85 in 132-column mode,
6499: cols#132, wsl#132,
6500: rs2=\E[35h\E[?3h$<70>, use=wy85,
6501: #
6502: # Wyse 85 in 132-column mode with visual bell.
6503: wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
6504: bel@,
6505: use=wy85-w,
1.14 millert 6506:
6507: # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
6508: # This copes with an apparent firmware bug in the wy85. He writes:
6509: # "What I did was change leave the terminal cursor keys set to Normal
6510: # (instead of application), and change \E[ to \233 for all the keys in
6511: # terminfo. At one point, I found some reference indicating that this
6512: # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
6513: # me), but I can't find that and the server under my bookmark to "Wyse
6514: # Technical" isn't responding. So there's the question of wether the wy85
6515: # terminfo should reflect the manufactuer's intended behaviour of the terminal
6516: # or the actual."
6517: wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
6518: am, hs, mc5i, mir, msgr, xenl, xon,
6519: cols#80, it#8, lines#24, wsl#80,
6520: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6521: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6522: clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
6523: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6524: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6525: cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
6526: dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
6527: dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
6528: ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
6529: enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
6530: fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
6531: ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
6532: ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
6533: is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
6534: is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
6535: kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
6536: kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
6537: kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
6538: kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
6539: kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
6540: kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
6541: kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
6542: khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
6543: kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
6544: mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
6545: rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
6546: rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
6547: rs3=\E[?5l, sc=\E7,
6548: sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
6549: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6550: smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6551: tsl=\E[40h\E7\E[25;%i%p1%dH,
1.1 millert 6552: #
6553: # Wyse 185 emulating a vt320 7 bit mode.
6554: #
6555: # This terminal always displays 25 lines. These lines may be used
6556: # as 24 data lines and a terminal status line (top or bottom) or
6557: # 25 data lines. The 48 and 50 line modes change the page size
6558: # and not the number of lines on the screen.
6559: #
6560: # The Compose Character key can be used as a meta key if changed
6561: # by set-up.
6562: #
6563: wy185|wyse185|wyse 185,
6564: am, hs, km, mc5i, mir, msgr, xenl, xon,
6565: cols#80, it#8, lines#24, wsl#80,
6566: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6567: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6568: clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
6569: csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
6570: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6571: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6572: cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
6573: dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
6574: dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
6575: el=\E[K, el1=\E[1K, enacs=\E)0,
6576: flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
6577: home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
6578: ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
6579: ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
6580: is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
6581: is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
6582: kbs=^H, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
6583: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM,
6584: kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6585: kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6586: kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
6587: kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
6588: kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
6589: khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6590: kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
6591: mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<2>,
6592: rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, rmkx=\E>,
6593: rmso=\E[27m, rmul=\E[24m,
6594: rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
6595: rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
6596: sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6597: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
6598: smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
6599: tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
6600: #
6601: # Wyse 185 with 24 data lines and top status (terminal status)
6602: wy185-24|wyse185-24|wyse 185 with 24 data lines,
6603: hs@,
6604: dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy185,
6605: #
6606: # Wyse 185 with visual bell.
6607: wy185-vb|wyse185-vb|wyse 185+flash,
6608: bel@, use=wy185,
6609: #
6610: # Wyse 185 in 132-column mode.
6611: wy185-w|wyse185-w|wyse 185 in 132-column mode,
6612: cols#132, wsl#132,
6613: dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
6614: ip=$<7>, rs2=\E[35h\E[?3h,
6615: use=wy185,
6616: #
6617: # Wyse 185 in 132-column mode with visual bell.
6618: wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
6619: bel@, use=wy185-w,
6620:
6621: # wy325 terminfo entries
6622: # Done by Joe H. Davis 3-9-92
6623:
6624: # lines 25 columns 80
6625: #
6626: wy325|wyse325|Wyse epc,
6627: am, bw, hs, mc5i, mir,
6628: cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
6629: acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
6630: bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
6631: cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6632: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
6633: dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
6634: flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
6635: il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
6636: is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
6637: is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
6638: kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
6639: kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
6640: kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
6641: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6642: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
6643: kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
6644: mc0=\EP, mc4=^T, mc5=\Ed#,
1.11 millert 6645: pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
6646: pfx=\EZ1%p1%{63}%+%c%p2%s\177,
6647: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
1.1 millert 6648: rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
6649: rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
6650: rs3=\EwG\Ee($<100>,
1.11 millert 6651: sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
1.1 millert 6652: sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
6653: smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
6654: tsl=\EF,
6655: use=adm+sgr,
6656:
6657: #
6658: # lines 24 columns 80 vb
6659: #
6660: wy325-vb|wyse325-vb|wyse-325 with visual bell,
6661: bel@, use=wy325,
6662:
6663: #
6664: # lines 24 columns 132
6665: #
6666: wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
6667: cols#132, lw#7, nlab#16, wsl#97,
6668: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
6669: rs2=\E`;$<70>, use=wy325,
6670: #
6671: # lines 25 columns 80
6672: #
6673: wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
6674: lh@, lines#25, lw@, nlab@,
6675: pln@, rs3=\EwG\Ee)$<100>, use=wy325,
6676: #
6677: # lines 25 columns 132
6678: #
6679: wy325-25w|wyse325-25w|wy325 132 columns,
6680: lh@, lines#25, lw@, nlab@,
6681: pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
6682: #
6683: # lines 25 columns 132 vb
6684: #
6685: wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
6686: bel@,
6687: use=wy325-w,
6688:
6689: #
6690: # lines 42 columns 80
6691: #
6692: wy325-42|wyse325-42|wyse-325 42 lines,
6693: lh@, lines#42, lw@, nlab@,
6694: pln@, rs3=\EwG\Ee)$<100>, use=wy325,
6695: #
6696: # lines 42 columns 132
6697: #
6698: wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
6699: lh@, lines#42, lw@, nlab@,
6700: pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
6701: #
6702: # lines 42 columns 132 vb
6703: #
6704: wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
6705: bel@,
6706: use=wy325-w,
6707: #
6708: # lines 43 columns 80
6709: #
6710: wy325-43|wyse325-43|wyse-325 43 lines,
6711: lh@, lines#43, lw@, nlab@,
6712: pln@, use=wy325,
6713: #
6714: # lines 43 columns 132
6715: #
6716: wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
6717: lh@, lines#43, lw@, nlab@,
6718: pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
6719: #
6720: # lines 43 columns 132 vb
6721: #
6722: wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
6723: bel@,
6724: use=wy325-w,
6725:
6726: # Wyse 370 -- 24 line screen with status line.
6727: #
6728: # The terminal may have to be set for 8 data bits and 2 stop
6729: # bits for the arrow keys to work.
6730: #
6731: # If you change keyboards the terminal will send different
6732: # escape sequences.
6733: # The following definition is for the basic terminal without
6734: # function keys.
6735: #
6736: # <u0> -> enter Tektronix 4010/4014 mode
6737: # <u1> -> exit Tektronix 4010/4014 mode
6738: # <u2> -> enter ASCII mode (from any ANSI mode)
6739: # <u3> -> exit ASCII mode (goto native ANSI mode)
6740: # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
6741: # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
6742: #
6743: # Bug: The <op> capability resets attributes.
6744: wy370-nk|wyse 370 without function keys,
6745: am, ccc, hs, mc5i, mir, msgr, xenl, xon,
6746: colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
6747: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6748: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6749: clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
6750: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6751: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6752: cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
6753: cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
6754: dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
6755: dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
6756: el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
6757: flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
6758: home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
6759: ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
6760: ind=\n$<2>,
6761: initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
6762: invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
6763: is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
6764: is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
6765: mc5=\E[5i,
6766: oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
6767: op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
6768: rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
6769: rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
6770: rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
6771: rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
6772: sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6773: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
6774: smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
6775: tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
6776: u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
6777: u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
6778: #
6779: # Function key set for the ASCII (wy-50 compatible) keyboard
6780: # This is the default 370.
6781: #
6782: wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
6783: kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6784: kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
6785: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6786: kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
6787: kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
6788: kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
6789: knp=\E[U, kpp=\E[V,
6790: use=wy370-nk,
6791: #
6792: # Function key set for the VT-320 (and wy85) compatible keyboard
6793: #
6794: wy370-105k|Wyse 370 with 105 key keyboard,
6795: ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs,
6796: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6797: kdch1=\E[3~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
6798: kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
6799: kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
6800: kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
6801: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
6802: khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
6803: kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
6804: use=wy370-nk,
6805: #
6806: # Function key set for the PC compatible keyboard
6807: #
6808: wy370-EPC|Wyse 370 with 102 key keyboard,
6809: kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6810: kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
6811: kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6812: kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6813: khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V,
6814: use=wy370-nk,
6815: #
6816: # Wyse 370 with visual bell.
6817: wy370-vb|Wyse 370 with visible bell,
6818: bel@, use=wy370,
6819: #
6820: # Wyse 370 in 132-column mode.
6821: wy370-w|Wyse 370 in 132-column mode,
6822: cols#132, wsl#132,
6823: rs2=\E[35h\E[?3h$<70>, use=wy370,
6824: #
6825: # Wyse 370 in 132-column mode with visual bell.
6826: wy370-wvb|Wyse 370 with visible bell 132-columns,
6827: flash=\E[30h\E\,\E[30l$<300>,
6828: use=wy370-w,
6829: wy370-rv|Wyse 370 reverse video,
6830: rs3=\E[32h\E[?5h, use=wy370,
6831: #
6832: # Wyse 99gt Tektronix 4010/4014 emulator,
6833: #
6834: wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
6835: am, os,
6836: cols#74, lines#35,
6837: bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
6838: cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
6839: cuu1=^K, ff=^L,
6840: hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
6841: home=^]7`x @\037,
6842: hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
6843: is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
6844: #
6845: # Wyse 160 Tektronix 4010/4014 emulator,
6846: #
6847: wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
6848: cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
6849: home=^]8`g @\037,
6850: use=wy99gt-tek,
6851: #
6852: # Wyse 370 Tektronix 4010/4014 emulator,
6853: #
6854: wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
6855: am, os,
6856: cols#80, lines#36,
6857: bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
6858: cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
6859: cuu1=^K, ff=^L,
6860: hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
6861: home=^]8g @\037,
6862: hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
6863: is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
6864: nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
6865:
6866: # Vendor-supplied Wyse entries end here.
6867:
6868: #
6869: #TITLE: TERMINFO ENTRY WY520
6870: #DATE: 8/5/93
6871: # The WY520 terminfo is based on the WY285 entry published on the WYSE
6872: # BBS with the addition of more function keys and special keys.
6873: #
6874: # rs1 -> set personality
6875: # rs2 -> set number of columns
6876: # rs3 -> set number of lines
6877: # is1 -> select the proper font
6878: # is2 -> do the initialization
6879: # is3 -> If this string is empty then rs3 gets sent.
6880: #
6881: # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
6882: # - The BS key is programmed to generate BS in smcup since
6883: # is2 doesn't seem to work.
6884: # - Remove and shift/Remove: delete a character
6885: # - Insert : enter insert mode
6886: # - Find : delete to end of file
6887: # - Select : clear a line
6888: # - F11, F12, F13: send default sequences (not ESC, BS, LF)
6889: # - F14 : Home key
6890: # - Bottom status line (host writable line) is used.
6891: # - smkx,rmkx are removed because this would put the numeric
6892: # keypad in Dec application mode which doesn't seem to work
6893: # with SCO applications.
6894: #
6895: wy520|wyse520|wyse 520,
6896: am, hs, km, mc5i, mir, xenl, xon,
6897: cols#80, it#8, lines#24, wsl#80,
6898: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6899: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6900: clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
6901: csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
6902: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6903: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6904: cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
6905: dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
6906: ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
6907: enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
6908: hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
6909: il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
6910: is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
6911: is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOu, kb2=\EOy,
6912: kbs=^H, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
6913: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
6914: kel=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
6915: kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
6916: kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
6917: kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
6918: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
6919: khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
6920: kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
6921: mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
6922: ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
6923: rmso=\E[m, rmul=\E[24m,
6924: rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
6925: rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
6926: sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6927: sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
6928: smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
6929: tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
6930: vpa=\E[%i%p1%dd,
6931: #
6932: # Wyse 520 with 24 data lines and status (terminal status)
6933: wy520-24|wyse520-24|wyse 520 with 24 data lines,
6934: hs@,
6935: dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520,
6936: #
6937: # Wyse 520 with visual bell.
6938: wy520-vb|wyse520-vb|wyse 520 with visible bell,
1.11 millert 6939: flash=\E[30h\E\,\E[30l$<100>, use=wy520,
1.1 millert 6940: #
6941: # Wyse 520 in 132-column mode.
6942: wy520-w|wyse520-w|wyse 520 in 132-column mode,
6943: cols#132, wsl#132,
6944: dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
6945: ip=$<7>, rs2=\E[35h\E[?3h,
6946: use=wy520,
6947: #
6948: # Wyse 520 in 132-column mode with visual bell.
6949: wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
1.11 millert 6950: flash=\E[30h\E\,\E[30l$<100>,
1.1 millert 6951: use=wy520-w,
6952: #
6953: #
6954: # Wyse 520 emulating a vt420 7 bit mode.
6955: # The DEL key is programmed to generate BS in is2.
6956: # With EPC keyboard.
6957: # - 'End' key will clear till end of line on EPC keyboard
6958: # - Shift/End : ignored.
6959: # - Insert : enter insert mode.
6960: # - Delete : delete a character (have to change interrupt character
6961: # to CTRL-C: stty intr '^c') for it to work since the
6962: # Delete key sends 7FH.
6963: wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
6964: kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
6965: kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
6966: use=wy520,
6967: #
6968: # Wyse 520 with 24 data lines and status (terminal status)
6969: # with EPC keyboard.
1.14 millert 6970: wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
1.1 millert 6971: hs@,
6972: dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520-epc,
6973: #
6974: # Wyse 520 with visual bell.
1.14 millert 6975: wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
1.11 millert 6976: flash=\E[30h\E\,\E[30l$<100>,
1.1 millert 6977: use=wy520-epc,
6978: #
6979: # Wyse 520 in 132-column mode.
6980: wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
6981: cols#132, wsl#132,
6982: dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
6983: ip=$<7>, rs2=\E[35h\E[?3h,
6984: use=wy520-epc,
6985: #
6986: # Wyse 520 in 132-column mode with visual bell.
1.14 millert 6987: wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
1.11 millert 6988: flash=\E[30h\E\,\E[30l$<100>,
1.1 millert 6989: use=wy520-epc-w,
6990: #
6991: # Wyse 520 in 80-column, 36 lines
6992: wy520-36|wyse520-36|wyse 520 with 36 data lines,
6993: hs@,
6994: lines#36,
6995: dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520,
6996: #
6997: # Wyse 520 in 80-column, 48 lines
6998: wy520-48|wyse520-48|wyse 520 with 48 data lines,
6999: hs@,
7000: lines#48,
7001: dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520,
7002: #
7003: # Wyse 520 in 132-column, 36 lines
7004: wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
7005: cols#132, wsl#132,
7006: rs2=\E[?3h,
7007: rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36,
7008: #
7009: # Wyse 520 in 132-column, 48 lines
7010: wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
7011: cols#132, wsl#132,
7012: rs2=\E[?3h,
7013: rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48,
7014: #
7015: #
7016: # Wyse 520 in 80-column, 36 lines with EPC keyboard
7017: wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
7018: hs@,
7019: lines#36,
7020: dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520-epc,
7021: #
7022: # Wyse 520 in 80-column, 48 lines with EPC keyboard
7023: wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
7024: hs@,
7025: lines#48,
7026: dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520-epc,
7027: #
7028: # Wyse 520 in 132-column, 36 lines with EPC keyboard
7029: wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
7030: cols#132, wsl#132,
7031: rs2=\E[?3h,
7032: rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36pc,
7033: #
7034: # Wyse 520 in 132-column, 48 lines with EPC keyboard
1.14 millert 7035: wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
1.1 millert 7036: cols#132, wsl#132,
7037: rs2=\E[?3h,
7038: rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48pc,
7039:
7040: # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
7041: # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
7042: # file and we don't know what <hts> is -- esr)
7043: wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
1.11 millert 7044: OTbs, am,
1.1 millert 7045: cols#80, it#8, lines#24,
7046: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
7047: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
7048: dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
1.11 millert 7049: is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
7050: kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
7051: rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
7052: smul=^N,
1.1 millert 7053:
7054: wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
7055: is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
1.11 millert 7056: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7057: khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
7058: use=wy75,
1.1 millert 7059:
7060: # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
7061: wy100q|Wyse 100 for Quotron,
1.11 millert 7062: OTbs,
7063: cols#80, lines#24, xmc#1,
1.1 millert 7064: cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
7065: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 7066: dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
7067: is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
7068: kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq,
7069: use=adm+sgr,
1.1 millert 7070:
7071: #### Kermit terminal emulations
7072: #
7073: # Obsolete Kermit versions may be listed in the section describing obsolete
7074: # non-ANSI terminal emulators later in the file.
7075: #
7076:
7077: # KERMIT standard all versions.
7078: # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
7079: # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
7080: # From: greg small <gts@populi.berkeley.edu> 9-25-84
7081: kermit|standard kermit,
1.11 millert 7082: OTbs,
7083: cols#80, lines#24,
1.1 millert 7084: clear=\EE, cub1=^H, cuf1=\EC,
7085: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
1.11 millert 7086: el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
7087: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
1.1 millert 7088: kermit-am|standard kermit plus auto-margin,
7089: am,
1.11 millert 7090: is2=K1 Standard Kermit plus Automatic Margins\n, use=kermit,
1.1 millert 7091: # IBMPC Kermit 1.2.
7092: # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
7093: # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
7094: # line).
7095: # From: greg small <gts@populi.berkeley.edu> 8-30-84
7096: pckermit|pckermit12|UCB IBMPC Kermit 1.2,
7097: am,
7098: lines#25,
7099: clear=\EH\EJ, ed@, el@,
1.11 millert 7100: is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
1.1 millert 7101: # IBMPC Kermit 1.20
7102: # Cannot use line 25, now acts funny like ansi special scrolling region.
7103: # Initialization must escape from that region by cursor position to line 24.
7104: # Cannot use character insert because 1.20 goes crazy if insert at col 80.
7105: # Does not use :am: because autowrap is lost when kermit dropped and restarted.
7106: # From: greg small <gts@populi.berkeley.edu> 12-19-84
7107: pckermit120|UCB IBMPC Kermit 1.20,
7108: it#8, lines#24,
1.11 millert 7109: cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
7110: il1=\EL,
1.1 millert 7111: is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
7112: rmir@, rmso=\Eq, smir@, smso=\Ep,
1.11 millert 7113: use=kermit,
1.1 millert 7114: # MS-DOS Kermit 2.27 for the IBMPC
7115: # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
7116: # Cannot use line 25, now acts funny like ansi special scrolling region.
7117: # Initialization must escape from that region by cursor position to line 24.
7118: # Does not use am: because autowrap is lost when kermit dropped and restarted.
7119: # Reverse video for standout like H19.
7120: # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
7121: # From: greg small <gts@populi.berkeley.edu> 3-17-85
7122: msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
1.11 millert 7123: OTbs, am@,
1.1 millert 7124: cols#80, it#8, lines#24,
7125: clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
7126: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
1.11 millert 7127: cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
7128: home=\EH, ht=^I, il1=\EL,
1.1 millert 7129: is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
1.11 millert 7130: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
7131: rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
1.1 millert 7132: # MS-DOS Kermit 2.27 with automatic margins
7133: # From: greg small <gts@populi.berkeley.edu> 3-17-85
7134: msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
7135: am,
7136: cvvis=\EO\Eq\EG\EvK5,
1.11 millert 7137: is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n, use=msk227,
1.1 millert 7138: # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
7139: # Automatic margins now default. Use ansi <sgr> for highlights.
7140: # Define function keys.
7141: # (msk22714: removed obsolete ":kn#10:" -- esr)
7142: # From: greg small <gts@populi.berkeley.edu> 3-17-85
7143: msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
7144: am,
7145: bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
7146: is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
1.11 millert 7147: kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
7148: kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
7149: sgr0=\E[m, smso=\E[1m, smul=\E[4m,
7150: use=mskermit227,
1.1 millert 7151: # This was designed for a VT320 emulator, but it is probably a good start
7152: # at support for the VT320 itself.
7153: # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
7154: # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
7155: vt320-k3|MS-Kermit 3.00's vt320 emulation,
7156: am, eslok, hs, km, mir, msgr, xenl,
7157: cols#80, it#8, lines#49, pb#9600, vt#3,
1.11 millert 7158: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.1 millert 7159: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7160: clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
1.11 millert 7161: csr=\E[%i%p1%d;%p1%dr, cub=\E[%p1%dD, cub1=^H,
7162: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7163: cup=\E[%i%p1%d;%p1%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7164: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
7165: dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1.1 millert 7166: flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
1.11 millert 7167: fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
7168: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
7169: is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
7170: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
7171: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
7172: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
7173: kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
7174: rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
7175: rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
7176: rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
1.1 millert 7177: sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
7178: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7179: tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
7180: # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
7181: # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
7182: # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
7183: vt320-k311|dec vt320 series as defined by kermit 3.11,
7184: am, eslok, hs, mir, msgr, xenl, xon,
7185: cols#80, it#8, lines#24, vt#3,
1.11 millert 7186: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.1 millert 7187: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7188: clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
7189: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7190: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7191: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.11 millert 7192: cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7193: dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
7194: flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
7195: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
1.1 millert 7196: is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1.11 millert 7197: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7198: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
7199: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
7200: lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
7201: rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
7202: rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
7203: rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
7204: smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
7205: smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
7206:
7207: ######## NON-ANSI TERMINAL EMULATIONS
7208: #
1.1 millert 7209:
1.11 millert 7210: #### Avatar
7211: #
7212: # These entries attempt to describe Avatar, a terminal emulation used with
7213: # MS-DOS bulletin-board systems. It was designed to give ANSI-like
7214: # capabilities, but with cheaper (shorter) control sequences. Messy design,
7215: # excessively dependent on PC idiosyncracies, but apparently rather popular
7216: # in the BBS world.
7217: #
7218: # No color support. Avatar doesn't fit either of the Tektronix or HP color
7219: # models that terminfo knows about. An Avatar color attribute is the
7220: # low 7 bits of the IBM-PC display-memory attribute. Bletch.
7221: #
7222: # I wrote these entries while looking at the Avatar spec. I don't have
7223: # the facilities to test them. Let me know if they work, or don't.
7224: #
7225: # Avatar escapes not used by these entries (because maybe you're smarter
7226: # and more motivated than I am and can figure out how to wrap terminfo
7227: # around some of them, and because they are weird enough to be funny):
7228: # level 0:
7229: # ^L -- clear window/reset current attribute to default
7230: # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
7231: #
7232: # bit: 6 5 4 3 2 1 0
7233: # | | | | |
7234: # +---+---+ | +---+---+
7235: # | | |
7236: # | | foreground color
7237: # | foreground intensity
7238: # background color
7239: # level 0+:
7240: # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
7241: # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
7242: # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
7243: # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
7244: # (^V^L and ^V^M set the current attribute as a side-effect.)
7245: # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
7246: # in the pattern, <c> the number of times the pattern
7247: # should be repeated. If either value is 0, no-op.
7248: # The pattern can contain Avatar console codes,
7249: # including other ^V ^Y patterns.
7250: # level 1:
7251: # ^V^O -- clockwise mode on; turn print direction right each time you
7252: # hit a window edge (yes, really). Turned off by CR
7253: # ^V^P -- no-op
7254: # ^V^Q%c -- query the driver
7255: # ^V^R -- driver reset
7256: # ^V^S -- Sound tone (PC-specific)
7257: # ^V^T -- change highlight at current cursor poition to %c
7258: # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
7259: # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
7260: # -- define window
1.1 millert 7261: #
1.11 millert 7262: # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
7263: # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
7264: # tell ncurses that the corresponding highlights exist; it should use <sgr>,
7265: # which is the only method that will actually work for multiple highlights.)
7266: avatar0|avatar terminal emulator level 0,
7267: am, bce, msgr,
7268: cols#80, it#8, lines#25,
7269: blink=^A^V\177, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
7270: cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
7271: ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%d, rev=^A^Vp,
7272: rs2=^L,
7273: sgr=\026\001%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p4%t{128}%|%;%?%p6%t%{16}%|%;,
7274: sgr0=^V^A^G, smacs=, smso=^A^Vp, smul=^V^A,
7275: use=klone+acs,
7276: # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
7277: avatar0+|avatar terminal emulator level 0+,
7278: dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
7279: # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
7280: avatar|avatar1|avatar terminal emulator level 1,
7281: civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
7282: rmam=^V", rmir=^V^P, smam=^V$,
7283: use=avatar0+,
7284:
7285: #### RBcomm
1.1 millert 7286: #
1.11 millert 7287: # RBComm is a lean and mean terminal emulator written by the Interrupt List
7288: # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
7289: # '90s), especially in the BBS world, and still has some loyal users due to
7290: # its very small memory footprint and to a cute macro language.
7291: rbcomm|IBM PC with RBcomm and EMACS keybindings,
7292: am, bw, mir, msgr, xenl,
7293: cols#80, it#8, lines#25,
7294: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
7295: clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
7296: cub1=^H, cud1=^C, cuf1=^B,
7297: cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^,
7298: cvvis=\E[?25h, dch1=^W, dl=\E[%p1%dM, dl1=^Z,
7299: ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, il=\E[%p1%dL, il1=^K,
7300: ind=\ED, invis=\E[8m,
7301: is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
7302: kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
7303: rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
7304: rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
7305: rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
7306: smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
7307: rbcomm-nam|IBM PC with RBcomm without autowrap,
7308: am@,
7309: bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
7310: is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
7311: kcub1=^H, kcud1=^J, nel=^M^J,
7312: use=rbcomm,
7313: rbcomm-w|IBM PC with RBcomm in 132 column mode,
7314: cols#132,
7315: bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
7316: is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
7317: kcub1=^H, kcud1=^J, nel=^M^J,
7318: use=rbcomm,
1.1 millert 7319:
7320: ######## OLDER TERMINAL TYPES
7321: #
7322: # This section is devoted to older commercial terminal brands that are now
7323: # discontinued, but known to be still in use or represented by emulations.
7324: #
7325:
7326: #### AT&T (att, tty)
7327: #
7328: # This section also includes Teletype-branded VDTs.
7329: #
7330: # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
7331: # Boundless Technologies); for details, see the header comment on the ADDS
7332: # section.
7333: #
7334: # These are AT&T's official terminfo entries. All-caps aliases have been
7335: # removed.
7336: #
1.11 millert 7337: att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
7338: am, eo, mir, msgr, xon,
7339: cols#80, it#8, lines#24,
7340: bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
7341: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7342: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7343: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7344: el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
7345: il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
7346: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
7347: kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
7348: kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
7349: kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
7350: kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
7351: kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
7352: rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
7353: smso=\E[7m,
7354: att2350|AT&T 2350 Video Information Terminal 80 column mode,
7355: mc0@, mc4@, mc5@,
7356: use=att2300,
1.1 millert 7357:
7358: # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
7359: # Seems upward compatible with vt100, plus ins/del line/char.
7360: # On sgr, the protection parameter is ignored.
7361: # No check is made to make sure that only 3 parameters are output.
7362: # standout= reverse + half-intensity = 3 | 5.
7363: # bold= reverse + underline = 2 | 3.
7364: # note that half-bright blinking doesn't look different from normal blinking.
7365: # NOTE:you must program the function keys first, label second!
7366: # (att4410: a BSD entry has been seen with the following capabilities:
7367: # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
7368: # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
1.11 millert 7369: att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
7370: am, hs, mir, msgr, xon,
7371: cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
7372: acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7373: bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
7374: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
7375: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
7376: dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
7377: ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
7378: is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
7379: kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7380: kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
7381: kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
7382: ll=\E[24H, nel=^M^J,
7383: pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
7384: pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
7385: rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
7386: sc=\E7,
7387: sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7388: sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
7389: tsl=\E7\E[25;%p1%{1}%+%dH,
7390:
7391: att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
7392: cols#132, wsl#132,
7393: is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
7394:
7395: att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
7396: OTbs,
7397: pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, use=att5410v1,
7398:
7399: att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
7400: cols#132, wsl#132,
7401: is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
1.1 millert 7402:
7403: # 5410 in terms of a vt100
7404: # (v5410: added <rmam>/<smam> based on init string -- esr)
1.11 millert 7405: v5410|att5410 in terms of a vt100,
7406: am, mir, msgr, xon,
7407: cols#80, it#8, lines#24, vt#3,
7408: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7409: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
7410: clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
7411: cub1=^H, cud1=^J, cuf1=\E[C$<2>,
7412: cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
7413: dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
7414: enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
7415: il1=\E[L, ind=^J, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H,
7416: kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7417: kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\EOx,
7418: kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv,
7419: kf8=\EOl, kf9=\EOw, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
7420: rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
7421: rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
7422: sc=\E7,
7423: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
7424: sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
7425: smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
1.1 millert 7426:
7427: #
7428: # Teletype Model 5420 -- A souped up 5410, with multiple windows,
7429: # even! the 5420 has three modes: scroll, window or page mode
7430: # this terminfo should work in scroll or window mode, but doesn't
7431: # take advantage of any of the differences between them.
7432: #
7433: # Has memory below (2 lines!)
7434: # 3 pages of memory (plus some spare)
7435: # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
7436: # <hpa>, <hts> would work for these, but these work in both scroll and window
7437: # mode... Unset insert character so insert mode works
7438: # <is1> sets 80 column mode,
7439: # <is2> escape sequence:
7440: # 1) turn off all fonts
7441: # 2) function keys off, keyboard lock off, control display off,
7442: # insert mode off, erasure mode off,
7443: # 3) full duplex, monitor mode off, send graphics off, nl on lf off
7444: # 4) reset origin mode
7445: # 5) set line wraparound
7446: # 6) exit erasure mode, positional attribute mode, and erasure extent mode
7447: # 7) clear margins
7448: # 8) program ENTER to transmit ^J,
7449: # We use \212 to program the ^J because a bare ^J will get translated by
7450: # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
7451: # 1 2 3 4 5 6 7 8
7452: # <is3> set screen color to black,
7453: # No representation in terminfo for the delete word key: kdw1=\Ed
7454: # Key capabilities assume the power-up send sequence...
7455: # This <rmcup> is not strictly necessary, but it helps maximize
7456: # memory usefulness: <rmcup=\Ez>,
7457: # Alternate sgr0: <sgr0=\E[m\EW^O>,
7458: # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
7459: # smkx programs the SYS PF keys to send a set sequence.
7460: # It also sets up labels f1, f2, ..., f8, and sends edit keys.
7461: # This string causes them to send the strings <kf1>-<kf8>
7462: # when pressed in SYS PF mode.
7463: # (att4415: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 7464: att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
7465: OTbs, db, mir, xon,
7466: lh#2, lm#78, lw#8, nlab#8, wsl#55,
7467: cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
7468: cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
7469: cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
7470: dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
7471: flash=\E[?5h$<200>\E[?5l, home=\E[x,
7472: hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
7473: il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
7474: is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
7475: is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
7476: kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
7477: kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
7478: kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
7479: kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
7480: lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
7481: mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
7482: pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
7483: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
7484: rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
7485: rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
7486: sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7487: sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
7488: smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
7489: tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
7490: use=att4410,
7491:
7492: att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
7493: cols#132, lm#54, wsl#97,
7494: is1=\E[?3h$<100>, use=att4415,
7495:
7496: att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
7497: flash=\E[?5l$<200>\E[?5h, is3=\E[?5h,
7498: use=att4415,
7499:
7500: att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
7501: cols#132, lm#54, wsl#97,
7502: flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, use=att4415,
1.1 millert 7503:
7504: # Note that this mode permits programming USER PF KEYS and labels
7505: # However, when you program user pf labels you have to reselect
7506: # user pf keys to make them appear!
1.11 millert 7507: att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
7508: kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
7509: pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
7510: pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
7511:
7512: att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
7513: kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
7514: use=att4415+nl, use=att4415,
7515:
7516: att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
7517: kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
7518: use=att4415+nl, use=att4415-rv,
7519:
7520: att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
7521: kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
7522: use=att4415+nl, use=att4415-w,
7523:
7524: att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
7525: kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
7526: use=att4415+nl, use=att4415-w-rv,
7527:
7528: att5420_2|AT&T 5420 model 2 80 cols,
7529: am, db, hs, mir, msgr, xon,
7530: cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
7531: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7532: blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
7533: cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7534: cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
7535: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
7536: dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7537: dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
7538: el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
7539: hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
7540: ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
7541: invis=\E[8m,
7542: is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
7543: kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
7544: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
7545: kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
7546: kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
7547: kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
7548: kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
7549: lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
7550: mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
7551: pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
7552: pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
7553: rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
7554: rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
7555: sc=\E7,
7556: sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7557: sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
7558: smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7559: tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
7560: att5420_2-w|AT&T 5420 model 2 in 132 column mode,
7561: cols#132,
7562: is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, use=att5420_2,
7563:
7564: att4418|att5418|AT&T 5418 80 cols,
7565: am, xon,
7566: cols#80, lines#24,
7567: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7568: bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
7569: cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7570: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7571: cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
7572: dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
7573: ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
7574: is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%, kcub1=\E@,
7575: kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
7576: kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
7577: kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
7578: kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
7579: kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
7580: rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
7581: sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
7582: att4418-w|att5418-w|AT&T 5418 132 cols,
7583: cols#132,
7584: is1=\E[?3h, use=att5418,
7585:
7586: att4420|tty4420|teletype 4420,
7587: OTbs, da, db, eo, msgr, ul, xon,
7588: cols#80, lines#24, lm#72,
7589: bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
7590: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
7591: dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
7592: kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
7593: kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
7594: kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
7595: lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
7596: rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
1.1 millert 7597:
7598: # The following is a terminfo entry for the Teletype 4424
7599: # asynchronous keyboard-display terminal. It supports
7600: # the vi editor. The terminal must be set up as follows,
7601: #
7602: # HIGHLIGHT DEFINITION 3-TONE
7603: # DISPLAY FUNCTION GROUP III
7604: #
7605: # The second entry below provides limited (a la adm3a)
7606: # operation under GROUP II.
7607: #
7608: # This must be used with DISPLAY FUNCTION GROUP I or III
7609: # and HIGHLIGHT DEFINITION 3-TONE
7610: # The terminal has either bold or blink, depending on options
7611: #
7612: # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
1.11 millert 7613: att4424|tty4424|teletype 4424,
7614: OTbs, am, xon,
7615: cols#80, lines#24,
7616: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7617: bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
7618: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7619: cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
7620: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
7621: dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
7622: ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
7623: ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
7624: kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7625: kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
7626: khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
7627: rmul=\EZ,
7628: sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
7629: sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
7630: tbc=\EF,
7631:
7632: att4424-1|tty4424-1|teletype 4424 in display function group I,
7633: kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
7634: use=att4424,
1.1 millert 7635:
7636: # This entry is not one of AT&T's official ones, it was translated from the
7637: # 4.4BSD termcap file. The highlight strings are different from att4424.
7638: # I have no idea why this is -- older firmware version, maybe?
7639: # The following two lines are the comment originally attached to the entry:
7640: # This entry appears to avoid the top line - I have no idea why.
7641: # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
7642: att4424m|tty4424m|teletype 4424M,
7643: am, da, db, mir,
7644: cols#80, it#8, lines#23,
1.11 millert 7645: bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
7646: cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
7647: dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
7648: is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
7649: kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
7650: kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
7651: sgr0=\E[m, smso=\E[7m, smul=\E[4m,
1.1 millert 7652:
7653: # The Teletype 5425 is really version 2 of the Teletype 5420. It
7654: # is quite similar, except for some minor differences. No page
7655: # mode, for example, so all of the <cup> sequences used above have
7656: # to change back to what's being used for the 5410. Many of the
7657: # option settings have changed their numbering as well.
7658: #
7659: # This has been tested on a preliminary model.
7660: #
7661: # (att5425: added <rmam>/<smam> based on the init string -- esr)
1.11 millert 7662: att5425|tty5425|att4425|AT&T 4425/5425,
7663: am, da, db, hs, mir, msgr, xenl, xon,
7664: cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
7665: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7666: bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
7667: clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
7668: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7669: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7670: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7671: cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
7672: dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
7673: el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
7674: flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
7675: hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
7676: il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
7677: invis=\E[8m, is1=\E<\E[?3l$<100>,
7678: is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
7679: is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
7680: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
7681: kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
7682: kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
7683: kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
7684: kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
7685: nel=^M^J,
7686: pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
7687: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
1.1 millert 7688: rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
1.11 millert 7689: rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
7690: rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
7691: sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7692: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
7693: smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
7694: smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
7695: vpa=\E[%p1%{1}%+%dd,
7696:
7697: att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
7698: smkx=\E[21;1j\E[25;4j\Eent,
7699: use=att4425,
7700:
7701: att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
7702: cols#132, lm#54, wsl#97,
7703: is1=\E[?3h$<100>, use=tty5425,
1.1 millert 7704:
7705: # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
7706: # I also added <rmam>/<smam> -- esr)
1.11 millert 7707: att4426|tty4426|teletype 4426S,
7708: am, da, db, xon,
7709: cols#80, lines#24, lm#48,
7710: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7711: bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
7712: cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
7713: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7714: cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
7715: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
7716: hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
7717: il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
7718: is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
7719: kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
7720: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
7721: kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
7722: nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
7723: rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
7724: rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
7725: smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
7726: vpa=\E[%p1%dd,
1.1 millert 7727:
7728: # Terminfo entry for the AT&T 510 A Personal Terminal
7729: # Function keys 9 - 16 are available only after the
7730: # screen labeled (soft keys/action blocks) are labeled. Function key
7731: # 9 corresponds to the leftmost touch target on the screen,
7732: # function key 16 corresponds to the rightmost.
7733: #
7734: # This entry is based on one done by Ernie Rice at Summit, NJ and
7735: # changed by Anne Gallup, Skokie, IL, ttrdc!anne
1.11 millert 7736: att510a|bct510a|AT&T 510A Personal Terminal,
7737: am, mir, msgr, xenl, xon,
7738: cols#80, lh#2, lines#24, lw#7, nlab#8,
7739: acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
7740: bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
7741: civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
7742: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
7743: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7744: cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
7745: dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
7746: el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
7747: hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
7748: is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
7749: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
7750: kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
7751: kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
7752: kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
7753: mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
7754: pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
7755: rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
7756: sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
7757: sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
7758: smul=\E[4m, tbc=\E[3g,
1.1 millert 7759:
7760: # Terminfo entry for the AT&T 510 D Personal Terminal
7761: # Function keys 9 through 16 are accessed by bringing up the
7762: # system blocks.
7763: # Function key 9 corresponds to the leftmost touch target on the screen,
7764: # function key 16 corresponds to the rightmost.
7765: #
7766: # There are problems with soft key labeling. These are due to
7767: # strangenesses in the native terminal that are impossible to
7768: # describe in a terminfo.
1.11 millert 7769: att510d|bct510d|AT&T 510D Personal Terminal,
7770: am, da, db, mir, msgr, xenl, xon,
7771: cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
7772: acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
7773: bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
7774: clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
7775: cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
7776: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7777: cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
7778: dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
7779: el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
7780: hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
7781: il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
7782: invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
7783: kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
7784: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
7785: kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
7786: kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
7787: kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
7788: mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
7789: pln=\E[%p1%dp%p2%:-16s, rc=\E8,
7790: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
7791: rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
7792: rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
7793: rs2=\E[5;0|, sc=\E7,
7794: sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7795: sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
7796: smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
7797: smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
1.1 millert 7798:
7799: # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
1.11 millert 7800: att500|att513|AT&T 513 using page mode,
7801: am, chts, mir, msgr, xenl, xon,
7802: cols#80, lh#2, lines#24, lw#8, nlab#8,
7803: acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
7804: bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
7805: clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
7806: csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7807: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7808: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7809: cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
7810: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7811: enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
7812: hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
7813: indn=\E[%p1%dE, invis=\E[8m,
7814: is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
7815: kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
7816: kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
7817: kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
7818: kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
7819: kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
7820: kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
7821: kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
7822: kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7823: kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
7824: kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
7825: kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
7826: khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
7827: kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
7828: kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
7829: kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
7830: ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
7831: mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
7832: nel=\EE,
7833: pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
7834: pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
7835: pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
7836: pln=\E[%p1%dp%p2%:-16s, rc=\E8,
7837: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
7838: rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
7839: rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
7840: rmul=\E[m,
7841: rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
7842: rs2=\E[5;0|, sc=\E7,
7843: sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7844: sgr0=\E[m\017, smacs=^N, smir=\E[4h,
7845: smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
7846: smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
1.1 millert 7847:
7848: # 01-07-88
7849: # printer must be set to EMUL ANSI to accept ESC codes
7850: # <cuu1> stops at top margin
7851: # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
7852: # and alt font ascii,wrap on,tabs cleared
7853: # <is2> disables newline on LF,Emphasized off
7854: # The <u0> capability sets form length
1.11 millert 7855: att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
7856: xhpa, xvpa,
7857: bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
7858: orhi#100, orl#12, orvi#72,
7859: cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
7860: cr=^M,
7861: csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
7862: cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
7863: ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
7864: lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
7865: rshm=\E[m,
7866: scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
7867: smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
7868: smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
7869: u0=\E[%p1%dt, vpa=\E[%p1%dd,
1.1 millert 7870:
7871: # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
7872: # The following SET-UP modes are assumed for normal operation:
7873: # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
7874: # Other SET-UP modes may be set for operator convenience or communication
7875: # requirements. This termcap description is for the Resident Terminal Mode.
7876: # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
7877: # The BRL entry also said: UNSAFE :ll=\E[70H:
7878: att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
7879: am, xon,
7880: cols#88, it#8, lines#70, vt#3,
7881: bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
7882: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7883: dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
7884: home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7885: il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
7886: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
7887: kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
7888: rs1=\Ec, sc=\E7,
7889:
7890: # 5620 terminfo (2.0 or later ROMS with char attributes)
7891: # The following SET-UP modes are assumed for normal operation:
7892: # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
7893: # Other SET-UP modes may be set for operator convenience or communication
7894: # requirements. This termcap description is for Resident Terminal Mode. No
7895: # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
7896: # assumptions: <ind> (scroll forward one line) is only done at screen bottom
7897: # Be aware that older versions of the dmd have a firmware bug that affects
7898: # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
7899: # <msgr> is from an otherwise inferior BRL for this terminal. That entry
7900: # also has <ll>=\E[70H commented out and marked unsafe.
7901: # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
1.11 millert 7902: att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
7903: OTbs, am, msgr, npc, xon,
7904: cols#88, it#8, lines#70,
7905: bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
7906: cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7907: dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7908: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
7909: ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7910: indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
7911: kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
7912: pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
7913: rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
7914: sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
7915: att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
7916: lines#24, use=att5620,
7917: att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
7918: lines#34, use=att5620,
1.1 millert 7919: # 5620 layer running the "S" system's downloaded graphics handler:
7920: att5620-s|tty5620-s|layer|vitty|5620 S layer,
7921: OTbs, OTpt, am,
7922: cols#80, it#8, lines#72,
7923: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
7924: cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
7925: el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
7926: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
7927: kll=\E[70;1H,
7928:
7929: # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
7930: #
7931: # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
7932: # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
1.11 millert 7933: att605|AT&T 605 80 column 102key keyboard,
7934: am, eo, xon,
7935: cols#80, lines#24, lw#8, nlab#8, wsl#80,
7936: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7937: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
7938: cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
7939: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7940: dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7941: el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
7942: il1=\E[L, ind=^J, invis=\E[8m,
7943: is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
7944: kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
7945: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
7946: kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
7947: kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
7948: kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
7949: kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
7950: kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
7951: kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
7952: kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
7953: kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
7954: kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
7955: kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
7956: kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
7957: mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
7958: pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
7959: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
7960: rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
7961: rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
7962: smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
7963: tsl=\E7\E[25;%i%p1%dx,
7964: att605-pc|ATT 605 in pc term mode,
7965: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
7966: cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
7967: dch1=\E[P, dl1=\E[M, ich1=\E[@, il=\E[L, il1=\E[L, kcbt=\E[Z,
7968: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
7969: kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
7970: kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
7971: kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
7972: rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
7973: xonc=e,
7974: use=att605,
7975: att605-w|AT&T 605-w 132 column 102 key keyboard,
7976: cols#132, wsl#132,
7977: is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
1.1 millert 7978: # (att610: I added <rmam>/<smam> based on the init string. I also
7979: # added <indn> and <rin> because the BSD file says the att615s have them,
7980: # and the 615 is like a 610 with a big keyboard, and most of their other
7981: # smart terminals support the same sequence -- esr)
1.11 millert 7982: att610|AT&T 610; 80 column; 98key keyboard,
7983: am, eslok, hs, mir, msgr, xenl, xon,
7984: cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
7985: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7986: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
7987: clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
7988: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7989: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7990: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7991: cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
7992: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7993: flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
7994: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
7995: indn=\E[%p1%dS, invis=\E[8m,
7996: is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
7997: is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
7998: kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7999: kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
8000: kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
8001: kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
8002: kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
8003: nel=\EE,
8004: pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
8005: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
8006: ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
8007: rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
8008: sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8009: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8010: smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
8011: att610-w|AT&T 610; 132 column; 98key keyboard,
1.1 millert 8012: cols#132, wsl#132,
1.11 millert 8013: is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att610,
1.1 millert 8014:
1.11 millert 8015: att610-103k|AT&T 610; 80 column; 103key keyboard,
8016: kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
8017: kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
8018: kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
8019: kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
8020: kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
8021: kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
8022: kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
8023: kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
8024: khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
8025: knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
8026: kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
8027: krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
8028: kslt=\ENI, kspd=\EOp, kund=\EOs,
8029: use=att610,
8030: att610-103k-w|AT&T 610; 132 column; 103key keyboard,
1.1 millert 8031: cols#132, wsl#132,
1.11 millert 8032: is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att610-103k,
8033: att615|AT&T 615; 80 column; 98key keyboard,
8034: kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
8035: kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
8036: kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
8037: kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
8038: kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
8039: kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
8040: kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM,
8041: use=att610,
8042: att615-w|AT&T 615; 132 column; 98key keyboard,
8043: kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
8044: kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
8045: kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
8046: kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
8047: kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
8048: kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
8049: kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM,
8050: use=att610-w,
8051: att615-103k|AT&T 615; 80 column; 103key keyboard,
8052: kLFT=\E[ A, kRIT=\E[ @,
8053: use=att610-103k,
8054: att615-103k-w|AT&T 615; 132 column; 103key keyboard,
8055: kLFT=\E[ A, kRIT=\E[ @,
8056: use=att610-103k-w,
1.1 millert 8057: # (att620: I added <rmam>/<smam> based on the init string and
8058: # <rin>/<indn> from a BSD termcap -- esr)
1.11 millert 8059: att620|AT&T 620; 80 column; 98key keyboard,
8060: am, eslok, hs, mir, msgr, xenl, xon,
8061: cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
8062: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8063: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8064: clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
8065: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8066: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8067: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8068: cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
8069: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8070: flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
8071: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
8072: indn=\E[%p1%dS, invis=\E[8m,
8073: is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
8074: is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
8075: kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8076: kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
8077: kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
8078: kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
8079: kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
8080: kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
8081: kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
8082: kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
8083: kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
8084: kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
8085: kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
8086: mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
8087: pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
8088: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
8089: ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
8090: rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
8091: rs2=\Ec\E[?3l, sc=\E7,
8092: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8093: sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
8094: smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
8095: tsl=\E7\E[25;%i%p1%dx,
8096: att620-w|AT&T 620; 132 column; 98key keyboard,
8097: cols#132, wsl#132,
8098: is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att620,
8099: att620-103k|AT&T 620; 80 column; 103key keyboard,
8100: kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
8101: kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
8102: kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
8103: kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
8104: kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
8105: kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
8106: kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
8107: kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
8108: kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
8109: kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
8110: kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
8111: kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
8112: kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
8113: kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
8114: kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
8115: ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs,
8116: use=att620,
8117:
8118: att620-103k-w|AT&T 620; 132 column; 103key keyboard,
8119: cols#132, wsl#132,
8120: is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att620-103k,
1.1 millert 8121:
8122: # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
8123: # The following SETUP modes are assumed for normal operation:
8124: # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
8125: # Font_Size=Large Non-Layers_Window_Cols=80
8126: # Non-Layers_Window_Rows=60
8127: # Other SETUP modes may be set for operator convenience or communication
8128: # requirements. Some capabilities assume a printer attached to the Aux EIA
8129: # port. This termcap description is for the Fixed Non-Layers Window. No
8130: # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
8131: # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
1.11 millert 8132: att630|AT&T 630 windowing terminal,
8133: OTbs, am, da, db, mir, msgr, npc, xon,
8134: cols#80, it#8, lines#60, lm#0,
8135: bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
8136: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
8137: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
8138: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
8139: dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
8140: el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
8141: il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
8142: kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
8143: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
8144: kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
8145: kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
8146: kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
8147: kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
8148: mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
8149: rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
8150: rmul=\E[m, rs2=\Ec, sc=\E7,
8151: sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
8152: sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
8153: att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
8154: lines#24, use=att630,
1.1 millert 8155:
8156: # This is the att700 entry for 700 native emulation of the AT&T 700
8157: # terminal. Comments are relative to changes from the 605V2 entry and
8158: # att730 on which the entry is based. Comments show the terminfo
8159: # capability name, termcap name, and description.
8160: #
8161: # Here is what's going onm in the init string:
8162: # ESC [ 50;4| set 700 native mode (really is 605)
8163: # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
8164: # ESC [ 53;0| set GenFlow to Xon/Xoff
8165: # ESC [ 8 ;0| set CR on NL
8166: # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
8167: # ESC [ ? 4 l jump scroll
8168: # ESC [ ? 5 l/h video: normal (l); reverse (h)
8169: # ESC [ ?13 l Labels on
8170: # ESC [ ?15 l parity check = no
8171: # ESC [ 13 l monitor mode off
8172: # ESC [ 20 l LF on NL (not CRLF on NL)
8173: # ESC [ ? 7 h autowrap on
8174: # ESC [ 12 h local echo off
8175: # ESC ( B GO = ASCII
8176: # ESC ) 0 G1 = Special Char & Line Drawing
8177: # ESC [ ? 31 l Set 7 bit controls
8178: #
8179: # Note: Most terminals, especially the 600 family use Reverse Video for
8180: # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
8181: # Assume we should stay with reverse video for 70.. However, the 605V2 exits
8182: # standout mode with \E[m (all normal attributes). The 730 entry simply
8183: # exits reverse video which would leave other current attributes intact. It
8184: # was assumed the 730 entry to be more correct so rmso has changed. The
8185: # 605V2 has no sequences to turn individual attributes off, thus its setting
8186: # and the rmso/smso settings from the 730.
8187: #
8188: # Note: For the same reason as above in rmso I changed exit under-score mode
8189: # to specifically turn off underscore, rather than return to all normal
8190: # attributes
8191: #
8192: # Note: The following pkey_xmit is taken from the 605V2 which contained the
8193: # capability as pfxl. It was changed here to pfx since pfxl
8194: # will only compile successfully with Unix 4.0 tic. Also note that pfx only
8195: # allows strings to be parameters and label values must be programmed as
8196: # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
8197: # and strings to be parameters. The 605V2 pfx entry should be examined later
8198: # in this regard. For reference the 730 pfxl entry is shown here for comparison
8199: # 730 pfx entry:
8200: # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
8201: # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
8202: #
8203: # (for 4.0 tic)
8204: # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
8205: #
8206: # (for <4.0 tic)
8207: # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
8208: #
8209: # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
8210: #
8211: # Port1 Interface
8212: #
8213: # modular 10 pin Connector
8214: # Left side Right side
8215: # Pin 1 2 3 4 5 6 7 8 9 10
8216: #
8217: # Key (notch) at bottom
8218: #
8219: # Pin 1 DSR
8220: # 3 DCD
8221: # 4 DTR
8222: # 5 Sig Ground
8223: # 6 RD
8224: # 7 SD
8225: # 8 CTS
8226: # 9 RTS
8227: # 10 Frame Ground
8228: #
8229: # The manual is 189 pages and is loaded with details about the escape codes,
8230: # etc..... Available from AT&T CIC 800-432-6600...
8231: # ask for Document number 999-300-660..
8232: #
1.11 millert 8233: att700|AT&T 700 24x80 column display w/102key keyboard,
1.1 millert 8234: am, eslok, hs, mir, msgr, xenl, xon,
8235: cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
8236: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8237: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8238: clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
8239: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8240: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8241: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8242: cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
8243: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8244: enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
8245: fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
8246: il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
8247: is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
8248: is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
8249: kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8250: kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
8251: kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
8252: kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
8253: kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
8254: kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
8255: kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
8256: kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
8257: kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
8258: kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
8259: kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
8260: kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
8261: mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
8262: pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
8263: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
8264: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
8265: rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
8266: rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
8267: sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8268: sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
8269: smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
8270: tsl=\E7\E[99;%i%p1%dx,
8271:
8272: # This entry was modified 3/13/90 by JWE.
8273: # fixes include additions of <enacs>, correcting <rep>, and modification
8274: # of <kHOM>. (See comments below)
8275: # att730 has status line of 80 chars
8276: # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
8277: # the <kf25> and up keys are used for shifted system Fkeys
8278: # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
8279: # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
8280: # and 122 key keyboards, the 730's translation is \E[2J. For consistency
8281: # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
8282: # 102, 102+1, or 122 key keyboards
8283: # kHOM=\E[2J,
8284: # (att730: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 8285: att730|AT&T 730 windowing terminal,
8286: am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
8287: cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
8288: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8289: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8290: clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
8291: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8292: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8293: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8294: cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
8295: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8296: enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
8297: home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
8298: ind=\ED, invis=\E[8m,
8299: is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
8300: is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
8301: kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8302: kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
8303: kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
8304: kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
8305: kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
8306: kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
8307: kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
8308: kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
8309: kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
8310: kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
8311: kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
8312: kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
8313: mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
8314: pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
8315: pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
8316: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
8317: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
8318: rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
8319: rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
8320: sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8321: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8322: smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
8323: swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
8324: att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
8325: lines#41, use=att730,
8326: att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
8327: lines#24, use=att730,
8328: att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
8329: flash=\E[?5l$<200>\E[?5h,
8330: is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
8331: att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
8332: lines#41, use=att730r,
8333: att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
8334: lines#24, use=att730r,
1.1 millert 8335:
8336: # The following represents the screen layout along with the associated
8337: # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
8338: # not appear on the screen but are shown to reference the bezel buttons.
8339: # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
8340: # position relative to the screen.
8341: #
8342: #
8343: #
8344: # +----------------------------------------------------------------+
8345: # | |
8346: # XXXX | kf0 kf24 | XXXX
8347: # | |
8348: # | |
8349: # XXXX | kf1 kf23 | XXXX
8350: # | |
8351: # | |
8352: # XXXX | kf2 kf22 | XXXX
8353: # | |
8354: # | |
8355: # XXXX | kf3 kf21 | XXXX
8356: # | |
8357: # | |
8358: # XXXX | kf4 kf20 | XXXX
8359: # | |
8360: # | |
8361: # XXXX | kf5 kf19 | XXXX
8362: # | |
8363: # | |
8364: # XXXX | kf6 kf18 | XXXX
8365: # | |
8366: # | |
8367: # XXXX | | XXXX
8368: # | |
8369: # | |
8370: # +----------------------------------------------------------------+
8371: #
8372: # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
8373: #
8374: # Note: XXXX represents the screen buttons
8375: # CMD REDRAW
8376: #
8377: # MAIL
8378: #
8379: # version 1 note:
8380: # The character string sent by key 'kf26' may be user programmable
8381: # to send either \E[16s, or \E[26s.
8382: # The character string sent by key 'krfr' may be user programmable
8383: # to send either \E[17s, or \E[27s.
8384: #
8385: # Depression of the "CMD" key sends \E! (kcmd)
8386: # Depression of the "MAIL" key sends \E[26s (kf26)
8387: # "REDRAW" same as "REFRESH" (krfr)
8388: #
8389: # "kf" functions adds carriage return to output string if terminal is in
8390: # 'new line' mode.
8391: #
8392: # The following are functions not covered in the table above:
8393: #
8394: # Set keyboard character (SKC): \EPn1;Pn2w
8395: # Pn1= 0 Back Space key
8396: # Pn1= 1 Break key
8397: # Pn2= Program char (hex)
8398: #
8399: # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
8400: # Pn1= Window number (1-39)
8401: # Pn2-Pn5= Y;X;Y;X coordinates
8402: #
8403: # Screen Selection (SSL): \E[Pnu
8404: # Pn= Window number
8405: #
8406: # Set Terminal Modes (SM): \E[Pnh
8407: # Pn= 3 Graphics mode
8408: # Pn= > Cursor blink
8409: # Pn= < Enter new line mode
8410: # Pn= = Enter reverse insert/replace mode
8411: # Pn= ? Enter no scroll mode
8412: #
8413: # Reset Terminal Mode (RM): \E[Pnl
8414: # Pn= 3 Exit graphics mode
8415: # Pn= > Exit cursor blink
8416: # Pn= < Exit new line mode
8417: # Pn= = Exit reverse insert/replace mode
8418: # Pn= ? Exit no scroll mode
8419: #
8420: # Screen Status Report (SSR): \E[Pnp
8421: # Pn= 0 Request current window number
8422: # Pn= 1 Request current window dimensions
8423: #
8424: # Device Status Report (DSR): \E[6n Request cursor position
8425: #
8426: # Call Status Report (CSR): \E[Pnv
8427: # Pn= 0 Call failed
8428: # Pn= 1 Call successful
8429: #
8430: # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
8431: # Pn1= Button number to be loaded
8432: # Pn2= Character count of "string"
8433: # Pn3= Key mode being loaded:
8434: # 0= Unshifted
8435: # 1= Shifted
8436: # 2= Control
8437: # String= Text string (15 chars max)
8438: #
8439: # Screen Number Report (SNR): \E[Pnp
8440: # Pn= Screen number
8441: #
8442: # Screen Dimension Report (SDR): \E[Pn1;Pn2r
8443: # Pn1= Number of rows available in window
8444: # Pn2= Number of columns available in window
8445: #
8446: # Cursor Position Report (CPR): \E[Pn1;Pn2R
8447: # Pn1= "Y" Position of cursor
8448: # Pn2= "X" Position of cursor
8449: #
8450: # Request Answer Back (RAB): \E[c
8451: #
8452: # Answer Back Response (ABR): \E[?;*;30;VSV
8453: # *= 0 No printer available
8454: # *= 2 Printer available
8455: # V= Software version number
8456: # SV= Software sub version number
8457: # (printer-available field not documented in v1)
8458: #
8459: # Screen Alignment Aid: \En
8460: #
8461: # Bell (lower pitch): \E[x
8462: #
8463: # Dial Phone Number: \EPdstring\
8464: # string= Phone number to be dialed
8465: #
8466: # Set Phone Labels: \EPpstring\
8467: # string= Label for phone buttons
8468: #
8469: # Set Clock: \EPchour;minute;second\
8470: #
8471: # Position Clock: \EPsY;X\
8472: # Y= "Y" coordinate
8473: # X= "X" coordinate
8474: #
8475: # Delete Clock: \Epr\
8476: #
8477: # Programming The Function Buttons: \EPfPn;string\
8478: # Pn= Button number (00-06, 18-24)
8479: # (kf00-kf06, kf18-kf24)
8480: # string= Text to sent on button depression
8481: #
8482: # The following in version 2 only:
8483: #
8484: # Request For Local Directory Data: \EPp12;\
8485: #
8486: # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
8487: #
8488: # Request for Local Directory Data in print format: \EPp13;\
8489: #
8490: # Enable 'Prt on Line' mode: \022 (DC2)
8491: #
8492: # Disable 'Prt on Line' mode: \024 (DC4)
8493: #
8494:
8495: # 05-Aug-86:
8496: # The following Terminfo entry describes functions which are supported by
8497: # the AT&T 5430/pt505 terminal software version 2 and later.
1.11 millert 8498: att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
1.1 millert 8499: am, xon,
8500: cols#80, it#8, lines#24,
1.11 millert 8501: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8502: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
8503: cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
8504: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8505: cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8506: cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
8507: dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
8508: il=\E[%p1%dL, il1=\E[L, ind=^J,
8509: is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
8510: kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8511: kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
8512: kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
8513: kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
8514: kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
8515: krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
8516: rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
8517: rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
8518: smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
1.1 millert 8519:
8520: # The following Terminfo entry describes functions which are supported by
8521: # the AT&T 5430/pt505 terminal software version 1.
8522: att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
1.11 millert 8523: lines#24,
8524: mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
8525: tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
8526: lines#22, use=att505,
8527: #
8528: #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
8529: # This cut mark helps make life less painful for people running ncurses tic
8530: # on machines with relatively little RAM. The file can be broken in half here
8531: # cleanly and compiled in sections -- no `use' references cross this cut
8532: # going forward.
8533: #
1.1 millert 8534:
8535: #### Ampex (Dialogue)
8536: #
8537: # Yes, these are the same people who are better-known for making audio- and
8538: # videotape. I'm told they are located in Redwood City, CA.
8539: #
8540:
8541: # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
8542: # (ampex80: some capabilities merged in from SCO's entry -- esr)
8543: ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
1.11 millert 8544: OTbs, am, bw, ul,
1.1 millert 8545: cols#80, it#8, lines#24,
1.11 millert 8546: bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
8547: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8548: dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
8549: ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
1.1 millert 8550: smso=\Ej, smul=\El, tbc=\E3,
8551: # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
1.11 millert 8552: ampex175|ampex d175,
8553: am,
8554: cols#80, lines#24,
8555: bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8556: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8557: dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
8558: is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
8559: kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
8560: rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
1.1 millert 8561: # No backspace key in the main QWERTY cluster. Fortunately, it has a
8562: # NEWLINE/PAGE key just above RETURN that sends a strange single-character
8563: # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
8564: # mode), this key can be used as the erase key; I find I like this. Because
8565: # some people and some systems may not, there is another termcap ("ampex175")
8566: # that suppresses this little eccentricity by omitting the relevant capability.
1.11 millert 8567: ampex175-b|ampex d175 using left arrow for erase,
8568: kbs=^_,
8569: use=ampex175,
1.1 millert 8570: # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
8571: # (ampex210: removed obsolete ":kn#10:" -- esr)
8572: ampex210|a210|ampex a210,
1.11 millert 8573: OTbs, am, hs, xenl,
1.1 millert 8574: cols#80, it#8, lines#24, xmc#1,
8575: cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
8576: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 8577: dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
8578: fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
8579: if=/usr/share/tabset/std, il1=\EE, invis@,
8580: is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
8581: kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8582: kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8583: kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
8584: tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
1.1 millert 8585: # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
8586: # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
8587: # and moved the padding to be *after* the caps -- esr)
1.11 millert 8588: ampex219|ampex-219|amp219|Ampex with Automargins,
8589: hs, xenl,
8590: cols#80, it#8, lines#24,
8591: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
8592: clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
8593: csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
8594: cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
8595: cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
8596: el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
8597: is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
8598: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
8599: kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
8600: kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
8601: rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
8602: rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
8603: smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
8604: ampex219w|ampex-219w|amp219w|Ampex 132 cols,
8605: cols#132, lines#24,
8606: bel=^G, cr=^M, cud1=^J, ind=^J,
8607: is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
1.1 millert 8608: # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
8609: ampex232|ampex-232|Ampex Model 232,
8610: am,
8611: cols#80, lines#24, xmc#1,
1.11 millert 8612: cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
8613: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8614: dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
8615: flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
8616: invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
8617: kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
8618: kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
8619: kf9=^AI\r, khome=^^,
8620: use=adm+sgr,
1.1 millert 8621: # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
1.11 millert 8622: ampex232w|Ampex Model 232 / 132 columns,
1.1 millert 8623: cols#132, lines#24,
1.11 millert 8624: is2=\E\034Eg\El, use=ampex232,
1.1 millert 8625:
8626: #### Ann Arbor (aa)
8627: #
8628: # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
8629: # numbers of function keys. At least some used monitors in portrait mode,
8630: # allowing up to 76-character screen heights! They were reachable at:
8631: #
8632: # Ann Arbor Terminals
8633: # 6175 Jackson Road
8634: # Ann Arbor, MI 48103
8635: # (313)-663-8000
8636: #
8637: # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
8638: # can't be found on the Web; I fear they're long dead. R.I.P.
8639: #
8640:
8641:
8642: # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
8643: # Highly modified 6/22 by Mike O'Brien.
8644: # split out into several for the various screen sizes by dave-yost@rand
8645: # Modifications made 3/82 by Mark Horton
8646: # Modified by Tom Quarles at UCB for greater efficiency and more diversity
8647: # status line moved to top of screen, <flash> removed 5/82
8648: # Some unknown person at SCO then hacked the init strings to make them more
8649: # efficient.
8650: #
8651: # assumes the following setup:
8652: # A menu: 0000 1010 0001 0000
8653: # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
8654: # C menu: 56 66 0 0 9600 0110 1100
8655: # D menu: 0110 1001 1 0
8656: #
8657: # Briefly, the settings are for the following modes:
8658: # (values are for bit set/clear with * indicating our preference
8659: # and the value used to test these termcaps)
8660: # Note that many of these settings are irrelevent to the terminfo
8661: # and are just set to the default mode of the terminal as shipped
8662: # by the factory.
8663: #
8664: # A menu: 0000 1010 0001 0000
8665: # Block/underline cursor*
8666: # blinking/nonblinking cursor*
8667: # key click/no key click*
8668: # bell/no bell at column 72*
8669: #
8670: # key pad is cursor control*/key pad is numeric
8671: # return and line feed/return for <cr> key *
8672: # repeat after .5 sec*/no repeat
8673: # repeat at 25/15 chars per sec. *
8674: #
8675: # hold data until pause pressed/process data unless pause pressed*
8676: # slow scroll/no slow scroll*
8677: # Hold in area/don't hold in area*
8678: # functions keys have default*/function keys disabled on powerup
8679: #
8680: # show/don't show position of cursor during page transmit*
8681: # unused
8682: # unused
8683: # unused
8684: #
8685: # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
8686: # Baud rate (9600*)
8687: #
8688: # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
8689: # 1 stop bit*/2 stop bits
8690: # parity error detection off*/on
8691: #
8692: # keyboard local/on line*
8693: # half/full duplex*
8694: # disable/do not disable keyboard after data transmission*
8695: #
8696: # transmit entire page/stop transmission at cursor*
8697: # transfer/do not transfer protected characters*
8698: # transmit all characters/transmit only selected characters*
8699: # transmit all selected areas/transmit only 1 selected area*
8700: #
8701: # transmit/do not transmit line separators to host*
8702: # transmit/do not transmit page tab stops tabs to host*
8703: # transmit/do not transmit column tab stop tabs to host*
8704: # transmit/do not transmit graphics control (underline,inverse..)*
8705: #
8706: # enable*/disable auto XON/XOFF control
8707: # require/do not require receipt of a DC1 from host after each LF*
8708: # pause key acts as a meta key/pause key is pause*
8709: # unused
8710: #
8711: # unused
8712: # unused
8713: # unused
8714: # unused
8715: #
8716: # XON character (17*)
8717: # XOFF character (19*)
8718: #
8719: # C menu: 56 66 0 0 9600 0110 1100
8720: # number of lines to print data on (printer) (56*)
8721: #
8722: # number of lines on a sheet of paper (printer) (66*)
8723: #
8724: # left margin (printer) (0*)
8725: #
8726: # number of pad chars on new line to printer (0*)
8727: #
8728: # printer baud rate (9600*)
8729: #
8730: # printer parity: 00=odd,01=even*,10=space,11=mark
8731: # printer stop bits: 2*/1
8732: # print/do not print guarded areas*
8733: #
8734: # new line is: 01=LF,10=CR,11=CRLF*
8735: # unused
8736: # unused
8737: #
8738: # D menu: 0110 1001 1 0
8739: # LF is newline/LF is down one line, same column*
8740: # wrap to preceding line if move left from col 1*/don't wrap
8741: # wrap to next line if move right from col 80*/don't wrap
8742: # backspace is/is not destructive*
8743: #
8744: # display*/ignore DEL character
8745: # display will not/will scroll*
8746: # page/column tab stops*
8747: # erase everything*/erase unprotected only
8748: #
8749: # editing extent: 0=display,1=line*,2=field,3=area
8750: #
8751: # unused
8752: #
8753:
1.11 millert 8754: annarbor4080|aa4080|ann arbor 4080,
8755: OTbs, am,
8756: cols#80, lines#40,
8757: bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
8758: cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
8759: cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
8760: kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
1.1 millert 8761:
8762: # Strange Ann Arbor terminal from BRL
8763: aas1901|Ann Arbor K4080 w/S1901 mod,
8764: am,
8765: cols#80, lines#40,
8766: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
8767: home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
8768: nel=^M^J,
8769:
8770: # If you're using the GNU termcap library, add
8771: # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
8772: # to these capabilities. This is the nonstandard GNU termcap scrolling
8773: # capability, arguments are:
8774: # 1. Total number of lines on the screen.
8775: # 2. Number of lines above desired scroll region.
8776: # 3. Number of lines below (outside of) desired scroll region.
8777: # 4. Total number of lines on the screen, the same as the first parameter.
8778: # The generic Ann Arbor entry is the only one that uses this.
1.11 millert 8779: aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
8780: OTbs, am, km, mc5i, mir, xon,
8781: cols#80, it#8,
8782: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
8783: clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
8784: cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
8785: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8786: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8787: el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
8788: hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
8789: il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
8790: is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
8791: kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8792: kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
8793: kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
8794: kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
8795: kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
8796: kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
8797: khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
8798: mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
8799: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
8800: rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
8801: rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
8802: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
8803: sgr0=\E[m,
8804: smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
8805: smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
8806: vpa=\E[%p1%{1}%+%dd,
8807:
8808: aaa+rv|ann arbor ambassador in reverse video,
8809: blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
8810: is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
8811: rs1=\E[H\E[7m\E[J$<156>,
8812: sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
8813: sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
1.1 millert 8814: # Ambassador with the DEC option, for partial vt100 compatibility.
1.11 millert 8815: aaa+dec|ann arbor ambassador in dec vt100 mode,
8816: acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
8817: csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
8818: sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
8819: smacs=^O,
8820: aaa-18|ann arbor ambassador/18 lines,
8821: lines#18,
8822: is2=\E7\E[60;0;0;18p\E8,
8823: rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p, use=aaa+unk,
8824: aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
8825: use=aaa+rv, use=aaa-18,
8826: aaa-20|ann arbor ambassador/20 lines,
8827: lines#20,
8828: is2=\E7\E[60;0;0;20p\E8,
8829: rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p, use=aaa+unk,
8830: aaa-22|ann arbor ambassador/22 lines,
8831: lines#22,
8832: is2=\E7\E[60;0;0;22p\E8,
8833: rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p, use=aaa+unk,
8834: aaa-24|ann arbor ambassador/24 lines,
8835: lines#24,
8836: is2=\E7\E[60;0;0;24p\E8,
8837: rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p, use=aaa+unk,
8838: aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
8839: use=aaa+rv, use=aaa-24,
8840: aaa-26|ann arbor ambassador/26 lines,
8841: lines#26,
8842: is2=\E7\E[60;0;0;26p\E8,
8843: rmcup=\E[60;0;0;26p\E[26;1H\E[K,
8844: smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
8845: aaa-28|ann arbor ambassador/28 lines,
8846: lines#28,
8847: is2=\E7\E[60;0;0;28p\E8,
8848: rmcup=\E[60;0;0;28p\E[28;1H\E[K,
8849: smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
8850: aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
8851: eslok, hs,
8852: lines#29,
8853: dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
8854: fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
8855: rmcup=\E[60;1;0;30p\E[29;1H\E[K,
8856: smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
8857: tsl=\E[>51h\E[1;%p1%dH\E[2K,
8858: use=aaa+unk,
8859: aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
8860: use=aaa+rv, use=aaa-30-s,
8861: aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
8862: rmcup=\E[60;1;0;30p\E[59;1H\E[K,
8863: smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
8864: aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
8865: rmcup=\E[60;1;0;30p\E[59;1H\E[K,
8866: smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
8867: aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
8868: lines#30,
8869: is2=\E7\E[60;0;0;30p\E8,
8870: rmcup=\E[60;0;0;30p\E[30;1H\E[K,
8871: smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
8872: aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
8873: use=aaa+rv, use=aaa-30,
8874: aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
8875: rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
8876: use=aaa-30,
8877: aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
8878: rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
8879: use=aaa+rv, use=aaa-30,
8880: aaa-36|ann arbor ambassador/36 lines,
8881: lines#36,
8882: is2=\E7\E[60;0;0;36p\E8,
8883: rmcup=\E[60;0;0;36p\E[36;1H\E[K,
8884: smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
8885: aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
8886: use=aaa+rv, use=aaa-36,
8887: aaa-40|ann arbor ambassador/40 lines,
8888: lines#40,
8889: is2=\E7\E[60;0;0;40p\E8,
8890: rmcup=\E[60;0;0;40p\E[40;1H\E[K,
8891: smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
8892: aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
8893: use=aaa+rv, use=aaa-40,
8894: aaa-48|ann arbor ambassador/48 lines,
8895: lines#48,
8896: is2=\E7\E[60;0;0;48p\E8,
8897: rmcup=\E[60;0;0;48p\E[48;1H\E[K,
8898: smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
8899: aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
8900: use=aaa+rv, use=aaa-48,
8901: aaa-60-s|ann arbor ambassador/59 lines+status,
8902: eslok, hs,
8903: lines#59,
8904: dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
8905: fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
8906: tsl=\E[>51h\E[1;%p1%dH\E[2K,
8907: use=aaa+unk,
8908: aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
8909: use=aaa+rv, use=aaa-60-s,
8910: aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
8911: use=aaa+dec, use=aaa+rv, use=aaa-60-s,
8912: aaa-60|ann arbor ambassador/60 lines,
8913: lines#60,
8914: is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, use=aaa+unk,
8915: aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
8916: use=aaa+rv, use=aaa-60,
8917: aaa-db|ann arbor ambassador 30/destructive backspace,
8918: OTbs@,
8919: cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
8920:
8921: guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
8922: lines#33,
8923: flash=\E[>59h$<100>\E[>59l,
8924: is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
8925: rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p,
8926: use=aaa+unk,
8927: guru+rv|guru changes for reverse video,
8928: flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
8929: guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
8930: use=guru+rv, use=guru-33,
8931: guru+s|guru status line,
8932: eslok, hs,
8933: dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
1.1 millert 8934: rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
1.11 millert 8935: tsl=\E[>51h\E[1;%p1%dH\E[2K,
8936: guru-nctxt|guru with no saved context,
8937: smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
8938: guru-s|guru-33-s|ann arbor guru/33 lines+status,
8939: lines#32,
8940: is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
8941: smcup=\E[33;1p\E[255;1H\E[K,
8942: use=guru+s, use=guru+unk,
8943: guru-24|ann arbor guru 24 lines,
8944: cols#80, lines#24,
8945: is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p, use=guru+unk,
8946: guru-44|ann arbor guru 44 lines,
8947: cols#97, lines#44,
8948: is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p, use=guru+unk,
8949: guru-44-s|ann arbor guru/44 lines+status,
8950: lines#43,
8951: is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
8952: smcup=\E[44;1p\E[255;1H\E[K,
8953: use=guru+s, use=guru+unk,
8954: guru-76|guru with 76 lines by 89 cols,
8955: cols#89, lines#76,
8956: is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p, use=guru+unk,
8957: guru-76-s|ann arbor guru/76 lines+status,
8958: cols#89, lines#75,
8959: is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
8960: smcup=\E[76;1p\E[255;1H\E[K,
8961: use=guru+s, use=guru+unk,
8962: guru-76-lp|guru-lp|guru with page bigger than line printer,
8963: cols#134, lines#76,
8964: is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p, use=guru+unk,
8965: guru-76-w|guru 76 lines by 178 cols,
8966: cols#178, lines#76,
8967: is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p, use=guru+unk,
8968: guru-76-w-s|ann arbor guru/76 lines+status+wide,
8969: cols#178, lines#75,
8970: is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
8971: smcup=\E[76;1p\E[255;1H\E[K,
8972: use=guru+s, use=guru+unk,
8973: guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
8974: cols#178, lines#76,
8975: is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p, use=guru+unk,
8976: aaa-rv-unk|ann arbor unknown type,
8977: lh#0, lw#0, nlab#0,
8978: blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
8979: is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
8980: rs1=\E[H\E[7m\E[J,
8981: sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
8982: sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
1.1 millert 8983:
8984: #### Applied Digital Data Systems (adds)
8985: #
8986: # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
8987: # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
8988: # terminals was merged again. Then AT&T sold the terminal business to
8989: # SunRiver, which later changed its name to Boundless Technologies. The
8990: # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
8991: # as of early 1995) are at:
8992: #
8993: # Boundless Technologies
8994: # 100 Marcus Boulevard
8995: # Hauppauge, NY 11788-3762
8996: # Vox: (800)-231-5445
8997: # Fax: (516)-342-7378
8998: # Web: http://boundless.com
8999: #
9000: # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
9001: # In 1995 Boundless acquired DEC's terminals business.
9002: #
9003:
9004: # Regent: lowest common denominator, works on all regents.
9005: # (regent: renamed ":bc:" to ":le:" -- esr)
9006: regent|Adds Regent Series,
9007: OTbs, am,
9008: cols#80, lines#24,
9009: bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
9010: home=\EY\s\s, ind=^J, ll=^A,
9011: # Regent 100 has a bug where if computer sends escape when user is holding
9012: # down shift key it gets confused, so we avoid escape.
9013: regent100|Adds Regent 100,
9014: xmc#1,
1.11 millert 9015: bel=^G,
9016: cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
9017: kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
9018: kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
9019: lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
9020: sgr0=\E0@, smso=\E0P, smul=\E0`,
9021: use=regent,
1.1 millert 9022: regent20|Adds Regent 20,
1.11 millert 9023: bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, use=regent,
1.1 millert 9024: regent25|Adds Regent 25,
1.11 millert 9025: bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, use=regent20,
1.1 millert 9026: regent40|Adds Regent 40,
9027: xmc#1,
9028: bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
1.11 millert 9029: kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
9030: kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
9031: lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
9032: smul=\E0`,
9033: use=regent25,
1.1 millert 9034: regent40+|Adds Regent 40+,
1.11 millert 9035: is2=\EB, use=regent40,
1.1 millert 9036: regent60|regent200|Adds Regent 60,
9037: dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
1.11 millert 9038: rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
9039: use=regent40+,
1.1 millert 9040: # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
9041: # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
9042: viewpoint|addsviewpoint|adds viewpoint,
1.11 millert 9043: OTbs, am,
1.1 millert 9044: cols#80, lines#24,
1.11 millert 9045: bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
9046: cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
9047: cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
9048: ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
9049: kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
1.1 millert 9050: rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
9051: # Some viewpoints have bad ROMs that foo up on ^O
1.11 millert 9052: screwpoint|adds viewpoint with ^O bug,
9053: cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
1.1 millert 9054:
9055: # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
9056: # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
9057: # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
9058: # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
9059: # invis=01000100 and %c is the logical or of desired attributes.
9060: # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
9061: vp3a+|viewpoint3a+|adds viewpoint 3a+,
9062: am, bw,
9063: cols#80, it#8, lines#24,
1.11 millert 9064: civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M, cub1=^H, cud1=^J,
9065: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9066: ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, kbs=^H, kcub1=^H,
9067: kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, nel=^M^J, rmso=\E(,
9068: sgr=\E0%{64}%?%p1%tQ%|%;%?%p2%t%{96}%|%;%?%p3%tP%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%?%p7%tD%|%;%c\E),
1.1 millert 9069: sgr0=\E(, smso=\E0Q\E),
9070: vp60|viewpoint60|addsvp60|adds viewpoint60,
1.11 millert 9071: use=regent40,
1.1 millert 9072: #
9073: # adds viewpoint 90 - from cornell
9074: # Note: emacs sends ei occasionally to insure the terminal is out of
9075: # insert mode. This unfortunately puts the viewpoint90 IN insert
9076: # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
9077: # - :ei=:im=: must be present in the termcap translation.)
9078: # - <xhp> indicates glitch that attributes stick to location
9079: # - <msgr> means it's safe to move in standout mode
9080: # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
9081: # the status line
9082: # Function key and label capabilities merged in from SCO.
9083: vp90|viewpoint90|adds viewpoint 90,
1.11 millert 9084: OTbs, bw, msgr, xhp,
1.1 millert 9085: cols#80, lines#24,
1.11 millert 9086: clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
1.1 millert 9087: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
9088: dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
9089: ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
1.11 millert 9090: kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
9091: kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
9092: kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
9093: lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
9094: lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
9095: sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
1.1 millert 9096: # Note: if return acts weird on a980, check internal switch #2
9097: # on the top chip on the CONTROL pc board.
9098: adds980|a980|adds consul 980,
1.11 millert 9099: OTbs, am,
1.1 millert 9100: cols#80, lines#24,
1.11 millert 9101: bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
9102: cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
1.1 millert 9103: dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
1.11 millert 9104: kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
9105: kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
1.9 millert 9106:
1.1 millert 9107: #### C. Itoh Electronics
9108: #
9109: # As of 1995 these people no longer make terminals (they're still in the
9110: # printer business). Their terminals were all clones of the DEC VT series.
9111: # They're located in Orange County, CA.
9112: #
9113:
9114: # CIT 80 - vt-52 emulator, the termcap has been modified to remove
9115: # the delay times and do an auto tab set rather than the indirect
9116: # file used in vt100.
9117: cit80|cit-80|citoh 80,
1.11 millert 9118: OTbs, am,
1.1 millert 9119: cols#80, lines#24,
1.11 millert 9120: clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
9121: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
9122: ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9123: kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
1.1 millert 9124: # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
9125: # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
9126: cit101|citc|C.itoh fast vt100,
1.11 millert 9127: OTbs, am, xenl,
1.1 millert 9128: cols#80, lines#24,
9129: bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
9130: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
9131: dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
1.11 millert 9132: flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
1.1 millert 9133: is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
9134: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9135: rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1.11 millert 9136: sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
9137: smul=\E[4m,
1.1 millert 9138: # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
9139: # The following termcap entry was created from the Callan cd100 entry. The
9140: # last two lines (with the capabilities in caps) are used by RM-cobol to allow
9141: # full selection of combinations of reverse video, underline, and blink.
9142: # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
9143: # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
9144: # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
9145: cit101e|C. Itoh CIT-101e,
9146: OTbs, OTpt, am, mir, msgr,
9147: cols#80, it#8, lines#24,
1.11 millert 9148: acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
9149: cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1.1 millert 9150: cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
9151: el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
1.11 millert 9152: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
9153: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
9154: kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
9155: rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
9156: smkx=\E=, smso=\E[7m, smul=\E[4m,
1.1 millert 9157: # From: David S. Lawyer, June 1997:
9158: # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
9159: # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
9160: # late 1980's CIT Terminals went out of business.
9161: # There is no need to use the initialization string is=... (by invoking
9162: # tset or setterm etc.) provided that the terminal has been manually set
9163: # up (and the setup saved with ^S) to be compatible with this termcap. To be
9164: # compatible it should be in ANSI mode (not VT52). A set-up that
9165: # works is to set all the manually setable stuff to factory defaults
9166: # by pressing ^D in set-up mode. Then increse the brighness with the
9167: # up-arrow key since the factory default will likely be dim on an old
9168: # terminal. Then change any options you want (provided that they are
9169: # compatible with the termcap). For my terminal I set: Screen
9170: # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
9171: # on. I also set up mine for parity (but you may not need it). Then
9172: # save the setup with ^S.
9173: # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
9174: cit101e-rv|Citoh CIT-101e (sets reverse video),
9175: am, eo, mir, msgr, xenl, xon,
9176: cols#80, it#8, lines#24,
1.11 millert 9177: OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
9178: civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
9179: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9180: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
9181: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9182: cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
9183: dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
9184: home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9185: ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
1.1 millert 9186: is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
1.11 millert 9187: kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9188: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
9189: rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
9190: rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
9191: sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
9192: smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
1.1 millert 9193: u7=\E[6n, u8=\E[?6c, u9=\E[c,
9194: cit101e-n|CIT-101e w/o am,
9195: am@,
9196: cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
9197: cit101e-132|CIT-101e with 132 cols,
9198: cols#132,
9199: kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
9200: cit101e-n132|CIT-101e with 132 cols w/o am,
9201: am@,
9202: cols#132,
9203: cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
9204: # CIE Terminals CIT-500 from BRL
9205: # The following SET-UP modes are assumed for normal operation:
9206: # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
9207: # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
9208: # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
9209: # Other SET-UP modes may be set for operator convenience or communication
9210: # requirements.
9211: # Hardware tabs are assumed to be set every 8 columns; they can be set up
9212: # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
9213: # "stty ixon -ixany" to enable DC3/DC1 flow control!
9214: # (cit500: I added <rmam>/<smam> based on the init string -- esr)
9215: cit500|CIE Terminals CIT-500,
9216: OTbs, OTpt, mir, msgr, xon,
9217: OTkn#10, cols#80, it#8, lines#64, vt#3,
9218: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
9219: clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
9220: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
9221: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9222: cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9223: ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
1.11 millert 9224: il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
9225: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
9226: ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
9227: kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
9228: khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
9229: lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
9230: lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
9231: ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
1.1 millert 9232: rmso=\E[m, rmul=\E[m,
9233: rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
1.11 millert 9234: sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
9235: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1.1 millert 9236:
9237: # C. Itoh printers begin here
1.11 millert 9238: citoh|ci8510|8510|c.itoh 8510a,
9239: cols#80, it#8,
9240: bold=\E!, cub1@,
9241: is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
9242: rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
9243: smul=\EX,
9244: use=lpr,
9245: citoh-pica|citoh in pica,
9246: is1=\EN, use=citoh,
9247: citoh-elite|citoh in elite,
9248: cols#96,
9249: is1=\EE,
9250: is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089., use=citoh,
9251: citoh-comp|citoh in compressed,
9252: cols#136,
9253: is1=\EQ,
9254: is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129., use=citoh,
1.1 millert 9255: # citoh has infinite cols because we don't want lp ever inserting \n\t**.
1.11 millert 9256: citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
9257: cols#32767,
9258: is1=\EP, use=citoh,
9259: citoh-6lpi|citoh in 6 lines per inch mode,
9260: is3=\EA, use=citoh,
9261: citoh-8lpi|citoh in 8 lines per inch mode,
9262: lines#88,
9263: is3=\EB, use=citoh,
1.1 millert 9264:
9265: #### Control Data (cdc)
9266: #
9267:
9268: cdc456|cdc 456 terminal,
1.11 millert 9269: OTbs, am,
1.1 millert 9270: cols#80, lines#24,
9271: bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
1.11 millert 9272: cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
9273: el=^V, home=^Y, il1=\EL, ind=^J,
1.1 millert 9274:
9275: # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
9276: cdc721|CDC Viking,
9277: OTbs, am,
9278: cols#80, lines#24,
1.11 millert 9279: clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
9280: cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
1.1 millert 9281: kcuu1=^W, khome=^Y,
9282: cdc721ll|CDC Vikingll,
9283: OTbs, am,
9284: cols#132, lines#24,
1.11 millert 9285: clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
9286: cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
1.1 millert 9287: kcuu1=^W, khome=^Y,
9288: # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
9289: cdc752|CDC 752,
9290: OTbs, am, bw, xhp,
9291: cols#80, lines#24,
9292: bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
9293: cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
1.11 millert 9294: home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
1.1 millert 9295: # CDC 756
9296: # The following switch/key settings are assumed for normal operation:
9297: # 96 chars SCROLL FULL duplex not BLOCK
9298: # Other switches may be set according to communication requirements.
9299: # Insert/delete-character cannot be used, as the whole display is affected.
9300: # "so" & "se" are commented out until jove handles "sg" correctly.
9301: cdc756|CDC 756,
9302: OTbs, am, bw,
9303: OTkn#10, cols#80, lines#24,
9304: bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
9305: cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
1.11 millert 9306: dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
9307: kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
9308: kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
9309: kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
9310: khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
9311: lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
1.1 millert 9312: rs1=\031\030\002\003\017,
9313: #
9314: # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
9315: #
9316: # Part of the long initialization string defines the "DOWN" key to the left
9317: # of the tab key to send an ESC. The real ESC key is positioned way out
9318: # in right field.
9319: #
9320: # The termcap won't work in 132 column mode due to the way it it moves the
9321: # cursor. Termcap doesn't have the capability (as far as I could tell) to
9322: # handle the 721 in 132 column mode.
9323: #
9324: # (cdc721: changed :ri: to :sr: -- esr)
1.11 millert 9325: cdc721-esc|Control Data 721,
1.1 millert 9326: OTbs, OTpt, am, bw, msgr, xon,
9327: OTkn#10, cols#80, it#8, lines#30,
9328: bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
9329: cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
1.11 millert 9330: dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
9331: ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
1.1 millert 9332: is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
1.11 millert 9333: kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
9334: kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
9335: kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
9336: ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
9337: sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
9338: smso=^^D, smul=^\, tbc=^^^RY,
1.1 millert 9339:
9340: #### Getronics
9341: #
9342: # Getronics is a Dutch electronics company that at one time was called
9343: # `Geveke' and made async terminals; but (according to the company itself!)
9344: # they've lost all their documentation on the command set. The hardware
9345: # documentation suggests the terminals were actually manufactured by a
9346: # Taiwanese electronics company named Cal-Comp. There are known
9347: # to have been at least two models, the 33 and the 50.
9348: #
9349:
9350: # The 50 seems to be a top end vt220 clone, with the addition of a higher
9351: # screen resolution, a larger screen, at least 1 page of memory above and
9352: # below the screen, apparently pages of memory right and left of the screen
9353: # which can be panned, and about 75 function keys (15 function keys x normal,
9354: # shift, control, func A, func B). It also has more setup possibilities than
9355: # the vt220. The monitor case is dated November 1978 and the keyboard case is
9356: # May 1982.
9357: #
9358: # The vt100 emulation works as is. The entry below describes the rather
9359: # non-conformant (but more featureful) ANSI mode.
9360: #
9361: # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
9362: visa50|geveke visa 50 terminal in ansi 80 character mode,
9363: bw, mir, msgr,
9364: cols#80, lines#25,
1.11 millert 9365: acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
9366: blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
9367: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
9368: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
9369: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9370: dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
9371: dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
9372: hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
9373: il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
1.1 millert 9374: is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
1.11 millert 9375: ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
9376: kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
9377: kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
9378: kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
9379: kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
9380: lf3=A insert line, lf4=A delete line, lf5=A clear,
9381: lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
9382: lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
9383: rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
9384: rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
9385: smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
1.1 millert 9386: vpa=\E[%i%p1%dd,
9387:
9388: #### Human Designed Systems (Concept)
9389: #
9390: # Human Designed Systems
9391: # 400 Fehley Drive
9392: # King of Prussia, PA 19406
9393: # Vox: (610)-277-8300
9394: # Fax: (610)-275-5739
9395: # Net: support@hds.com
9396: #
9397: # John Martin <john@hds.com> is their termcap expert. They're mostly out of
9398: # the character-terminal business now (1995) and making X terminals. In
9399: # particular, the whole `Concept' line described here was discontinued long
9400: # ago.
9401: #
9402:
9403: # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
9404: # Extensive changes to c108 by arpavax:eric Feb 1982
9405: # Some unknown person at SCO then translated it to terminfo.
9406: #
9407: # There seem to be a number of different versions of the C108 PROMS
9408: # (with bug fixes in its Z-80 program).
9409: #
9410: # The first one that we had would lock out the keyboard of you
9411: # sent lots of short lines (like /usr/dict/words) at 9600 baud.
9412: # Try that on your C108 and see if it sends a ^S when you type it.
9413: # If so, you have an old version of the PROMs.
9414: #
9415: # You should configure the C108 to send ^S/^Q before running this.
9416: # It is much faster (at 9600 baud) than the c100 because the delays
9417: # are not fixed.
9418: # new status line display entries for c108-8p:
9419: # <is3> - init str #3 - setup term for status display -
9420: # set programmer mode, select window 2, define window at last
9421: # line of memory, set bkgnd stat mesg there, select window 0.
9422: #
9423: # <tsl> - to status line - select window 2, home cursor, erase to
9424: # end-of-window, 1/2 bright on, goto(line#0, col#?)
9425: #
9426: # <fsl> - from status line - 1/2 bright off, select window 0
9427: #
9428: # <dsl> - disable status display - set bkgnd status mesg with
9429: # illegal window #
9430: #
9431: # There are probably more function keys that should be added but
9432: # I don't know what they are.
9433: #
9434: # No delays needed on c108 because of ^S/^Q handshaking
9435: #
1.11 millert 9436: c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
9437: is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
9438: rmcup=\Ev \001\177p\Ep\r\n,
9439: use=c108-4p,
9440: c108-4p|concept108-4p|concept 108 w/4 pages,
9441: OTbs, eslok, hs, xon,
9442: pb@,
9443: acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
9444: cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
9445: cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
9446: ind=^J, is1=\EK\E!\E F,
9447: is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
9448: rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
9449: smcup=\EU\Ev 8p\Ep\r\E\025,
9450: tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
9451: c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
9452: rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
9453: use=c108-rv-4p,
9454: c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
9455: flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
1.1 millert 9456: use=c108-4p,
1.11 millert 9457: c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
9458: cols#132,
9459: is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
9460: smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
1.1 millert 9461:
9462: # Concept 100:
9463: # These have only window relative cursor addressing, not screen
9464: # relative. To get it to work right here, smcup/rmcup (which
9465: # were invented for the concept) lock you into a one page
9466: # window for screen style programs.
9467: #
9468: # To get out of the one page window, we use a clever trick:
9469: # we set the window size to zero ("\Ev " in rmcup) which the
9470: # terminal recognizes as an error and resets the window to all
9471: # of memory.
9472: #
9473: # This trick works on c100 but does not on c108, sigh.
9474: #
9475: # Some tty drivers use cr3 for concept, others use nl3, hence
9476: # the delays on cr and ind below. This padding is only needed at
9477: # 9600 baud and up. One or the other is commented out depending on
9478: # local conventions.
9479: #
9480: # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
9481: # less than 6 but more than 2 will work.
9482: #
9483: # Note: can't use function keys f7-f10 because they are
9484: # indistinguishable from arrow keys (!), also, del char and
9485: # clear eol use xon/xoff so they probably won't work very well.
9486: #
9487: # Also note that we don't define insrt/del char/delline/eop/send
9488: # because they don't transmit unless we reset them - I figured
9489: # it was a bad idea to clobber their definitions.
9490: #
9491: # The <mc5> sequence changes the escape character to ^^ so that
9492: # escapes will be passed through to the printer. Only trouble
9493: # is that ^^ won't be - ^^ was chosen to be unlikely.
9494: # Unfortunately, if you're sending raster bits through to be
9495: # plotted, any character you choose will be likely, so we lose.
9496: #
9497: # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
9498: # cannot be # in is2 because it will hang a c100 with no printer
9499: # if sent twice.
1.11 millert 9500: c100|concept100|concept|c104|c100-4p|hds concept 100,
9501: OTbs, am, eo, mir, ul, xenl,
9502: cols#80, lines#24, pb#9600, vt#8,
9503: bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
9504: cub1=^H, cud1=^J, cuf1=\E=,
9505: cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
9506: dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
9507: ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
9508: ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
9509: is1=\EK,
9510: is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
9511: is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
9512: kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
9513: kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
9514: kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
9515: khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
9516: kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
9517: mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
9518: rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
9519: rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
9520: rmso=\Ed, rmul=\Eg, sgr0=\EN@,
9521: smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
9522: smso=\ED, smul=\EG,
9523: c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
9524: cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
9525: smso=\EE,
9526: use=c100,
9527: oc100|oconcept|c100-1p|old 1 page concept 100,
9528: in,
9529: is3@, use=c100,
1.1 millert 9530:
9531: # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
9532: # Lots of notes, originally inline, but ncurses doesn't grok that.
9533: #
9534: # am: not available in power on mode, but turned on with \E[=107;207h in
9535: # is2=. Also, \E=124l in is2= could have been used to prevent needing
9536: # to specify xenl:, but that would have rendered the last space on the
9537: # last line useless.
9538: # bw: Not available in power on mode, but turned on with \E[=107;207h in
9539: # is2=.
9540: # clear: Could be done with \E[2J alone, except that vi (and probably most
9541: # other programs) assume that this also homes the cursor.
9542: # dsl: Go to window 2, go to the beginning of the line, use a line feed to
9543: # scroll the window, and go back to window 1.
9544: # is2: the string may cause a warning to be issued by tic that it
9545: # found a very long line and that it suspects that a comma is missing
9546: # somewhere. This warning can be ignored (unless it comes up more than
9547: # once). The initialization string contains the following commands:
9548: #
9549: # [Setup mode items changed from factory defaults:]
9550: # \E)0 set alternate character set to
9551: # graphics
9552: # ^O set character set to default
9553: # [In case it wasn't]
9554: # \E[m turn off all attributes
9555: # [In case they weren't off]
9556: # \E[=107; cursor wrap and
9557: # 207h character wrap on
9558: # \E[90;3u set Fkey definitions to "transmit"
9559: # defaults
9560: # \E[92;3u set cursor key definitions to
9561: # "transmit" defaults
9562: # \E[43;1u set shift F13 to transmit...
9563: # \177\E$P\177
9564: # \E[44;1u set shift F14 to transmit...
9565: # \177\E$Q\177
9566: # \E[45;1u set shift F15 to transmit...
9567: # \177\E$R\177
9568: # \E[46;1u set shift F16 to transmit...
9569: # \177\E$S\177
9570: # \E[200;1u set shift up to transmit...
9571: # \177\E$A\177
9572: # \E[201;1u set shift down to transmit...
9573: # \177\E$B\177
9574: # \E[202;1u set shift right to transmit...
9575: # \177\E$C\177
9576: # \E[203;1u set shift left to transmit...
9577: # \177\E$D\177
9578: # \E[204;1u set shift home to transmit...
9579: # \177\E$H\177
9580: # \E[212;1u set backtab to transmit...
9581: # \177\E$I\177
9582: # \E[213;1u set shift backspace to transmit...
9583: # \177\E$^H\177
9584: # \E[214;1u set shift del to transmit...
9585: # "\E$\177"
9586: # [Necessary items not mentioned in setup mode:]
9587: # \E[2!w move to window 2
9588: # \E[25;25w define window as line 25 of memory
9589: # \E[!w move to window 1
9590: # \E[2*w show current line of window 2 as
9591: # status line
9592: # \E[2+x set meta key to use high bit
9593: # \E[;3+} move underline to bottom of character
9594: #
9595: # All Fkeys are set to their default transmit definitions with \E[90;3u
9596: # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
9597: # setting MUST be redefined or deactivated, because the default is
9598: # contained in almost all of this terminal's Fkey strings! If for some
9599: # reason "quit" cannot be altered, the Fkeys can, but it would be
9600: # necessary to change ^| to ^] in all of these definitions, and add
9601: # \E[2;029!t to is2.
9602: # lines: is set to 24 because this terminal refuses to treat the 25th
9603: # line normally.
9604: # ll: Not available in power on mode, but turned on with \E[=107;207h in
9605: # is2=.
9606: # lm: Pointless, given that this definition locks a single screen of
9607: # memory into view, but what the hey...
9608: # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
9609: # other attributes alone), but some programs expect this to turn off
9610: # everything.
9611: # rmul: Could use \E[4!{ to turn off only underline (leaving any other
9612: # attributes alone), but some programs expect this to turn off
9613: # everything.
9614: # sgr: Attributes are set on this terminal with the string \E[ followed by
9615: # a list of attribute code numbers (in decimal, separated by
9616: # semicolons), followed by the character m. The attribute code
9617: # numbers are:
9618: # 1 for bold;
9619: # 2 for dim (which is ignored in power on mode);
9620: # 4 for underline;
9621: # 5 for blinking;
9622: # 7 for inverse;
9623: # 8 for not displayable; and
9624: # =99 for protected (except that there are strange side
9625: # effects to protected characters which make them inadvisable).
9626: # The mapping of terminfo parameters to attributes is as follows:
9627: # %p1 (standout) = bold and inverse together;
9628: # %p2 (underline) = underline;
9629: # %p3 (reverse) = inverse;
9630: # %p4 (blink) = blinking;
9631: # %p5 (dim) is ignored;
9632: # %p6 (bold) = bold;
9633: # %p7 (invisible) = not displayable;
9634: # %p8 (protected) is ignored; and
9635: # %p9 (alt char set) = alt char set.
9636: # The code to do this is:
9637: # \E[0 OUTPUT \E[0
9638: # %?%p1%p6%O IF (standout; bold) OR
9639: # %t;1 THEN OUTPUT ;1
9640: # %; ENDIF
9641: # %?%p2 IF underline
9642: # %t;4 THEN OUTPUT ;4
9643: # %; ENDIF
9644: # %?%p4 IF blink
9645: # %t;5 THEN OUTPUT ;5
9646: # %; ENDIF
9647: # %?%p1%p3%O IF (standout; reverse) OR
9648: # %t;7 THEN OUTPUT ;7
9649: # %; ENDIF
9650: # %?%p7 IF invisible
9651: # %t;8 THEN OUTPUT ;8
9652: # %; ENDIF
9653: # m OUTPUT m
9654: # %?%p9 IF altcharset
9655: # %t^N THEN OUTPUT ^N
9656: # %e^O ELSE OUTPUT ^O
9657: # %; ENDIF
9658: # sgr0: Everything is turned off (including alternate character set), since
9659: # there is no way of knowing what it is that the program wants turned
9660: # off.
9661: # smul: The "underline" attribute is reconfigurable to an overline or
9662: # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
9663: # bottom of the character cell. This was done to allow for more readable
9664: # underlined characters, and to be able to distinguish between an
9665: # underlined space, an underscore, and an underlined underscore.
9666: # xenl: Terminal can be configured to not need this, but this "glitch"
9667: # behavior is actually preferable with autowrap terminals.
9668: #
9669: # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
9670: # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
9671: # string modifies the 'O' in kf43 to kf46 to a '$'.
9672: #
9673: # kcbt was originally ^I but redefined in is2=.
9674: # kHOM was \E[H originally but redefined in is2=, as were a number of
9675: # other keys.
9676: # kDC was originally \177 but redefined in is2=.
9677: #
9678: # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
9679: # tsl: Go to window 2, then do an hpa=.
9680: #
9681: #------- flash=\E[8;3!}^G\E[3;3!}
9682: #------- flash=\E[?5h$<100>\E[?5l
9683: # There are two ways to flash the screen, both of which have their drawbacks.
9684: # The first is to set the bell mode to video, transmit a bell character, and
9685: # set the bell mode back - but to what? There is no way of knowing what the
9686: # user's old bell setting was before we messed with it. Worse, the command to
9687: # set the bell mode also sets the key click volume, and there is no way to say
9688: # "leave that alone", or to know what it's set to, either.
9689: # The second way to do a flash is to set the screen to inverse video, pad for a
9690: # tenth of a second, and set it back - but like before, there's no way to know
9691: # that the screen wasn't ALREADY in inverse video, or that the user may prefer
9692: # it that way. The point is moot anyway, since vi (and probably other
9693: # programs) assume that by defining flash=, you want the computer to use it
9694: # INSTEAD of bel=, rather than as a secondary type of signal.
9695: #
9696: #------- cvvis=\E[+{
9697: # The is the power on setting, which is also as visible as the cursor
9698: # gets.
9699: #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
9700: # Windowing is possible, but not defined here because it is also used to
9701: # emulate status line functions. Allowing a program to set a window could
9702: # clobber the status line or render it unusable. There is additional memory,
9703: # but screen scroll functions are destructive and do not make use of it.
9704: #
9705: #------- dim= Not available in power on mode.
9706: # You have a choice of defining low intensity characters as "half bright" and
9707: # high intensity as "normal", or defining low as "normal" and high as "bold".
9708: # No matter which you choose, only one of either "half bright" or "bold" is
9709: # available at any time, so taking the time to override the default is
9710: # pointless.
9711: #
9712: #------- prot=\E[=0;99m
9713: # Not defined, because it appears to have some strange side effects.
9714: #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
9715: #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
9716: #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
9717: # Available, but making them available to programs is inadvisable.
9718: # The code to do this is:
9719: # %?%p1%{24}%< IF ((key; 24) <;
9720: # %p1%{30}%> ((key; 30) >;
9721: # %p1%{54}%< (key; 54) <
9722: # %A ) AND
9723: # %O ) OR
9724: # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
9725: # %t\E[ THEN OUTPUT \E[
9726: # %p1%d OUTPUT (key) as decimal
9727: # [next line applies to pfx only]
9728: # ;1 OUTPUT ;1
9729: # u OUTPUT u
9730: # \177 OUTPUT \177
9731: # %p2%s OUTPUT (string) as string
9732: # \177 OUTPUT \177
9733: # [DEL chosen as delimiter, but could be any character]
9734: # [implied: ELSE do nothing]
9735: # %; ENDIF
9736: #
9737: #------- rs2=
9738: # Not defined since anything it might do could be done faster and easier with
9739: # either Meta-Shift-Reset or the main power switch.
9740: #
9741: #------- smkx=\E[1!z
9742: #------- rmkx=\E[!z
9743: # These sequences apply to the cursor and setup keys only, not to the
9744: # numeric keypad. But it doesn't matter anyway, since making these
9745: # available to programs is inadvisable.
9746: # For the key definitions below, all sequences beginning with \E$ are
9747: # custom and programmed into the terminal via is2. \E$ also has no
9748: # meaning to any other terminal.
9749: #
9750: #------- cmdch=\E[;%p1%d!t
9751: # Available, but making it available to programs is inadvisable.
9752: #------- smxon=\E[1*q
9753: # Available, but making it available to programs is inadvisable.
9754: # Terminal will send XON/XOFF on buffer overflow.
9755: #------- rmxon=\E[*q
9756: # Available, but making it available to programs is inadvisable.
9757: # Terminal will not notify on buffer overflow.
9758: #------- smm=\E[2+x
9759: #------- rmm=\E[+x
9760: # Available, but making them available to programs is inadvisable.
9761: #
9762: # Printing:
9763: # It's not made clear in the manuals, but based on other ansi/vt type
9764: # terminals, it's a good guess that this terminal is capable of both
9765: # "transparent print" (which doesn't copy data to the screen, and
9766: # therefore needs mc5i: specified to say so) and "auxilliary print"
9767: # (which does duplicate printed data on the screen, in which case mc4=
9768: # and mc5= should use the \E[?4i and \E[?5i strings instead).
9769:
9770: hds200|Human Designed Systems HDS200,
9771: am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
9772: cols#80, it#8, lines#24, lm#0,
9773: acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
9774: blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
9775: clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
9776: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
9777: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
9778: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9779: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9780: dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
9781: fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9782: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
9783: invis=\E[0;8m,
1.11 millert 9784: is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
1.1 millert 9785: kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
9786: kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9787: kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
9788: kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
9789: kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
9790: kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
9791: kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
9792: kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
9793: kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
9794: kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
9795: kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
9796: kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
9797: kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
9798: kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
9799: kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
9800: mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
9801: rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
9802: rmul=\E[m\017, sc=\E7,
9803: sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9804: sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
9805: smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
9806: vpa=\E[%i%p1%dd,
9807:
9808: # <ht> through <el> included to specify padding needed in raw mode.
9809: # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
1.11 millert 9810: avt-ns|concept avt no status line,
9811: OTbs, am, eo, mir, ul, xenl, xon,
9812: cols#80, it#8, lines#24, lm#192,
9813: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
9814: clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
9815: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9816: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9817: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9818: cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
9819: dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
9820: hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
9821: ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
9822: invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
9823: is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
9824: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9825: kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
9826: kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
9827: mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9828: pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
9829: prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
9830: ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
9831: rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
9832: sc=\E7,
9833: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
9834: sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
9835: smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
9836: tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
9837: avt-rv-ns|concept avt in reverse video mode/no status line,
9838: flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
9839: use=avt-ns,
9840: avt-w-ns|concept avt in 132 column mode/no status line,
9841: is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
9842: use=avt-ns,
9843: avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
9844: flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
9845: smcup=\E[H\E[1;24;1;132w,
9846: use=avt-ns,
1.1 millert 9847:
9848: # Concept AVT with status line. We get the status line using the
9849: # "Background status line" feature of the terminal. We swipe the
9850: # first line of memory in window 2 for the status line, keeping
9851: # 191 lines of memory and 24 screen lines for regular use.
9852: # The first line is used instead of the last so that this works
9853: # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
9854: # assumes an 8 page AVT but lm isn't currently used anywhere.)
9855: #
1.11 millert 9856: avt+s|concept avt status line changes,
9857: eslok, hs,
9858: lm#191,
9859: dsl=\E[0*w, fsl=\E[1;1!w,
9860: is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
9861: rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
9862: tsl=\E[2;1!w\E[;%p1%dH\E[2K,
9863: avt|avt-s|concept-avt|avt w/80 columns,
9864: use=avt+s, use=avt-ns,
9865: avt-rv|avt-rv-s|avt reverse video w/sl,
9866: flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, use=avt+s,
9867: use=avt-ns,
9868: avt-w|avt-w-s|concept avt 132 cols+status,
9869: is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, use=avt+s,
9870: use=avt-ns,
9871: avt-w-rv|avt-w-rv-s|avt wide+status+rv,
9872: flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
9873: smcup=\E[H\E[1;24;1;132w,
9874: use=avt+s, use=avt-ns,
1.1 millert 9875:
9876: #### Contel Business Systems.
9877: #
9878:
9879: # Contel c300 and c320 terminals.
1.11 millert 9880: contel300|contel320|c300|Contel Business Systems C-300 or C-320,
9881: am, in, xon,
9882: cols#80, lines#24, xmc#1,
9883: bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
9884: cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
9885: dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
9886: el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
9887: hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
9888: kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
9889: kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
9890: rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
1.1 millert 9891: # Contel c301 and c321 terminals.
9892: contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
9893: flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
1.11 millert 9894: use=contel300,
1.1 millert 9895:
9896: #### Data General (dg)
9897: #
9898: # According to James Carlson <carlson@xylogics.com> writing in January 1995,
9899: # the terminals group at Data General was shut down in 1991; all these
9900: # terminals have thus been discontinued.
9901: #
1.11 millert 9902: # DG terminals have function keys that respond to the SHIFT and CTRL keys,
9903: # e.g., SHIFT-F1 generates a different code from F1. To number the keys
9904: # sequentially, first the unmodified key codes are listed as F1 through F15.
9905: # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
9906: # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
9907: # F46 through F60. This is done in the private "includes" below whose names
9908: # start with "dgkeys+".
9909: #
9910: # DG terminals generally support 8 bit characters. For each of these terminals
9911: # two descriptions are supplied:
9912: # 1) A default description for 8 bits/character communications, which
9913: # uses the default DG international character set and keyboard codes.
9914: # 2) A description with suffix "-7b" for 7 bits/character communications.
9915: # This description must use the NON-DEFAULT native keyboard language.
9916:
9917: # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
9918: # Ctrl/Shift fdkeys (kf34-kf44).
9919:
9920: dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
9921: ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
9922: kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
9923: kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
9924: kf11=\233011z, kf12=\233012z, kf13=\233013z,
9925: kf14=\233014z, kf15=\233000z, kf16=\233101z,
9926: kf17=\233102z, kf18=\233103z, kf19=\233104z,
9927: kf2=\233002z, kf20=\233105z, kf21=\233106z,
9928: kf22=\233107z, kf23=\233108z, kf24=\233109z,
9929: kf25=\233110z, kf26=\233111z, kf27=\233112z,
9930: kf28=\233113z, kf29=\233114z, kf3=\233003z,
9931: kf30=\233100z, kf31=\233201z, kf32=\233202z,
9932: kf33=\233203z, kf34=\233204z, kf35=\233205z,
9933: kf36=\233206z, kf37=\233207z, kf38=\233208z,
9934: kf39=\233209z, kf4=\233004z, kf40=\233210z,
9935: kf41=\233211z, kf42=\233212z, kf43=\233213z,
9936: kf44=\233214z, kf45=\233200z, kf46=\233301z,
9937: kf47=\233302z, kf48=\233303z, kf49=\233304z,
9938: kf5=\233005z, kf50=\233305z, kf51=\233306z,
9939: kf52=\233307z, kf53=\233308z, kf54=\233309z,
9940: kf55=\233310z, kf56=\233311z, kf57=\233312z,
9941: kf58=\233313z, kf59=\233314z, kf6=\233006z,
9942: kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
9943: khome=\233H, kprt=\233i,
9944:
9945: dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
9946: ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
9947: kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9948: kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
9949: kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
9950: kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
9951: kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
9952: kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
9953: kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
9954: kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
9955: kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
9956: kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
9957: kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
9958: kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
9959: kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
9960: kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
9961: kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
9962: kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
9963: kf9=\E[009z, khome=\E[H, kprt=\E[i,
9964:
9965: dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
9966: kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
9967: kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
9968: kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
9969: kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
9970: kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
9971: kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
9972: kf37=^^$, kf38=^^%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
9973: kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
9974: kf8=^^x, kf9=^^y, khome=^H,
9975:
9976: dgkeys+15|Private entry describing 15 DG mode special keys,
9977: kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
9978: kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
9979: kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
9980: kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
9981: kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
9982: kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
9983: kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
9984: kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
9985: kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%, kf51=^^&,
9986: kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
9987: kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
9988: kf9=^^y,
9989:
9990: # Data General color terminals use the "Tektronix" color model. The total
9991: # number of colors varies with the terminal model, as does support for
9992: # attributes used in conjunction with color.
9993:
9994: # Removed u7, u8 definitions since they conflict with tack:
9995: # Preserve user-defined colors in at least some cases.
9996: # u7=^^Fh,
9997: # Default is ACM mode.
9998: # u8=^^F}20^^Fi^^F}21,
9999: #
10000: dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
10001: bce,
10002: colors#16, ncv#53, pairs#256,
10003: op=\036Ad\036Bd,
10004: setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
10005: setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
10006: setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
10007:
10008: dg+fixed|Fixed color info for DG D430C terminals in DG mode,
10009: use=dgunix+fixed,
10010:
10011: # Video attributes are coordinated using static variables set by "sgr", then
10012: # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
10013: # (D=dim, U=underline, B=blink, R=reverse.)
10014: dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
10015: bce,
10016: colors#8, ncv#16, pairs#64,
10017: op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
10018: setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10019: setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10020: setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10021: setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10022:
10023: dg+color|Color info for Data General D470C terminals in ANSI mode,
10024: colors#16, ncv#53, pairs#256,
10025: setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10026: setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10027: setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10028: setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10029: use=dg+color8,
10030:
10031: dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
10032: bce,
10033: colors#8, ncv#16, pairs#64,
10034: op=\036Ad\036Bd,
10035: setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
10036: setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
10037: setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
10038:
10039: dgmode+color|Color info for Data General D470C terminals in DG mode,
10040: colors#16, pairs#256,
10041: setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
10042: setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
10043: use=dgmode+color8,
10044:
10045: dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
10046: bce, ccc,
10047: colors#52, ncv#53, pairs#26,
10048: initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X,
10049: oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
10050: op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
10051: scp=\036RG2%p1%02X,
10052:
10053: # Colors are in the order: normal, reverse, dim, dim + reverse.
10054: dg+ccc|Configurable color info for DG D430C terminals in DG mode,
10055: bce, ccc,
10056: colors#52, ncv#53, pairs#26,
10057: initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
10058: oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
10059: op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
10060: scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
10061:
10062: # The generic DG terminal type (an 8-bit-clean subset of the 6053)
10063: # Initialization string 1 sets:
10064: # ^R - vertical scrolling enabled
10065: # ^C - blinking enabled
10066: dg-generic|Generic Data General terminal in DG mode,
10067: am, bw, msgr, xon,
10068: cols#80, lines#24,
10069: bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
10070: cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
10071: mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
10072: smul=^T,
10073: use=dgkeys+11,
1.1 millert 10074:
10075: # According to the 4.4BSD termcap file, the dg200 <cup> should be the
10076: # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
10077: # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
10078: # maybe they were originally nuls (which would fit).
1.11 millert 10079:
10080: dg200|data general dasher 200,
10081: OTbs, am, bw,
10082: cols#80, lines#24,
10083: bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
10084: cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
10085: kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
10086: kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
10087: kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
10088: smso=^^D, smul=^T,
10089:
1.1 millert 10090: # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
10091: dg210|dg-ansi|Data General 210/211,
10092: am,
10093: cols#80, lines#24,
1.11 millert 10094: OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
10095: cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D,
10096: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10097: nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m,
10098: smul=\E[4;m,
1.1 millert 10099: # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
10100: # courtesy of Carlos Rucalde of Vantage Software, Inc.
10101: # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
10102: # I suspect the d200 function keys actually work on the dg211, check it out.)
10103: dg211|Data General d211,
1.11 millert 10104: cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
10105: kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
1.1 millert 10106: rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>,
1.11 millert 10107: use=dg200,
1.14 millert 10108:
10109: # dg450 from Cornell (not official)
1.1 millert 10110: dg450|dg6134|data general 6134,
1.11 millert 10111: cub1@, cuf1=^X, use=dg200,
1.14 millert 10112:
10113: # Not official...
1.1 millert 10114: # Note: lesser Dasher terminals will not work with vi because vi insists upon
10115: # having a command to move straight down from any position on the bottom line
10116: # and scroll the screen up, or a direct vertical scroll command. The 460 and
10117: # above have both, the D210/211, for instance, has neither. We must use ANSI
10118: # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
10119: # backspace on all terminals. This is not so in DG mode.
10120: # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
10121: # grounds that there is no matching ":ml:"
10122: # fixed garbled ":k9=\E[00\:z:" capability -- esr)
10123: dg460-ansi|Data General Dasher 460 in ANSI-mode,
1.11 millert 10124: OTbs, am, msgr, ul,
1.1 millert 10125: cols#80, it#8, lines#24,
1.11 millert 10126: OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
10127: cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
10128: dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
10129: ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
10130: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10131: kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
10132: kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
10133: kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
10134: lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
10135: ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
10136: smul=\E[4m,
1.14 millert 10137: # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
1.1 millert 10138: # Data General 605x
10139: # Ought to work for a Model 6242, Type D210 as well as a 605x.
10140: # Note that the cursor-down key transmits ^Z. Job control users, beware!
10141: # This also matches a posted description of something called a `Dasher 100'
10142: # so there's a dg100 alias here.
10143: # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
1.11 millert 10144: dg6053-old|dg100|data general 6053,
1.1 millert 10145: OTbs, am, bw, ul,
10146: cols#80, lines#24,
1.11 millert 10147: OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
10148: cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
10149: home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
10150: kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
10151: kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
10152: rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
10153: smul=^T,
10154:
10155: # (Some performance can be gained over the generic DG terminal type)
10156: dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
10157: xon@,
10158: home=^P\0\0, ll=^P\0^W, use=dg-generic,
10159:
10160: # Like 6053, but adds reverse video and more keypad and function keys.
10161: d200|d200-dg|Data General DASHER D200,
10162: bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
10163: sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
10164: sgr0=\017\025\035\036E, smso=^^D^\,
10165: use=dgkeys+15, use=dg6053,
10166:
10167: # DASHER D210 series terminals in ANSI mode.
10168: # Reverse video, no insert/delete character/line, 7 bits/character only.
10169: #
10170: # Initialization string 1 sets:
10171: # <0 - scrolling enabled
10172: # <1 - blink enabled
10173: # <4 - print characters regardless of attributes
10174: d210|d214|Data General DASHER D210 series,
10175: am, bw, msgr, xon,
10176: cols#80, lines#24,
10177: bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
10178: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10179: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10180: cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
10181: el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
10182: ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
10183: sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
10184: sgr0=\E[m, smso=\E[2;7m, smul=\E[4m,
10185: use=dgkeys+7b,
10186:
10187: # DASHER D210 series terminals in DG mode.
10188: # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
10189: d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
10190: xon,
10191: ed=^^FF, use=d200-dg,
10192:
10193: # DASHER D211 series terminals in ANSI mode.
10194: # Like the D210, but with 8-bit characters and local printer support.
10195: #
10196: # Initialization string 2 sets:
10197: # \E[2;1;1;1v
10198: # 2;1 - 8 bit operations
10199: # 1;1 - 8 bit (international) keyboard language
10200: # \E(B - default primary character set (U.S. ASCII)
10201: # \E)4 - default secondary character set (international)
10202: # ^O - primary character set
10203: #
10204: d211|d215|Data General DASHER D211 series,
10205: km,
10206: is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b, use=d210,
10207:
10208: # Initialization string 2 sets:
10209: # \E[2;0;1;0v
10210: # 2;0 - 7 bit operations
10211: # 1;0 - 7 bit (native) keyboard language
10212: # \E(0 - default character set (the keyboard native language)
10213: # ^O - primary character set
10214: d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
10215: km@,
10216: is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
10217:
10218: # Like the D210 series, but adds support for 8-bit characters.
10219: #
10220: # Reset string 2 sets:
10221: # ^^N - secondary character set
10222: # ^^FS0> - 8 bit international character set
10223: # ^^O - primary character set
10224: # ^^FS00 - default character set (matching the native keyboard language)
10225: #
10226: d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
10227: km,
10228: rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
10229:
10230: d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
10231: use=d211-dg,
10232:
10233: # Enhanced DG mode with changes to be more UNIX compatible.
10234: d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
10235: mc5i,
10236: it#8,
10237: acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
10238: clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
10239: el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
10240: is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
10241: kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
10242: kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
10243: mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
10244: rs2=\036N\036FS0E\036O\036FS00,
10245: sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
10246: sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
10247: vpa=\020\177%p1%c,
10248: use=dgkeys+15, use=d216-dg,
10249: d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
10250: lines#25,
10251: is3=\036Fz2, use=d216+,
10252:
10253: d217-unix|Data General DASHER D217 in DG-UNIX mode,
10254: use=d216-unix,
10255: d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
10256: use=d216-unix-25,
10257:
10258: # DASHER D220 color terminal in ANSI mode.
10259: # Like the D470C but with fewer colors and screen editing features.
10260: #
10261: # Initialization string 1 sets:
10262: # \E[<0;<1;<4l
10263: # <0 - scrolling enabled
10264: # <1 - blink enabled
10265: # <4 - print characters regardless of attributes
10266: # \E[m - all attributes off
10267: # Reset string 1 sets:
10268: # \Ec - initial mode defaults (RIS)
10269: #
10270: d220|Data General DASHER D220,
10271: mc5i@,
10272: dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, use=dg+color8, use=d470c,
10273:
10274: d220-7b|Data General DASHER D220 in 7 bit mode,
10275: mc5i@,
10276: dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, use=dg+color8, use=d470c-7b,
10277:
10278: # Initialization string 3 sets:
10279: # - default cursor (solid rectangle)
10280: # Reset string 2 sets:
10281: # ^^N - secondary character set
10282: # ^^FS0> - 8 bit international character set
10283: # ^^O - primary character set
10284: # ^^FS00 - default character set (matching the native keyboard language)
10285: #
10286: d220-dg|Data General DASHER D220 color terminal in DG mode,
10287: mc5i@,
10288: dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
10289: rs2=\036N\036FS0>\036O\036FS00,
10290: use=dgmode+color8, use=d470c-dg,
10291:
10292: # DASHER D230C color terminal in ANSI mode.
10293: # Like the D220 but with minor ANSI compatibility improvements.
10294: #
10295: d230c|d230|Data General DASHER D230C,
10296: blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
10297: rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
10298: sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
10299: sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
10300: smul=\E[4;50m,
10301: use=dgkeys+7b, use=d220,
10302:
10303: d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
10304: use=d220-dg,
10305:
10306: # DASHER D400/D450 series terminals.
10307: # These add intelligent features like insert/delete to the D200 series.
10308: #
10309: # Initialization string 2 sets:
10310: # ^^FQ2 - default cursor (solid rectangle)
10311: # ^^FW - character protection disabled
10312: # ^^FJ - normal (80 column) mode
10313: # ^^F\^ - horizontal scrolling enabled (for alignment)
10314: # ^^FX004? - margins at columns 0 and 79
10315: # ^^F] - horizontal scrolling disabled
10316: # ^^O - primary character set
10317: # ^^FS00 - default character set (the keyboard native language)
10318: # - (should reset scrolling regions, but that glitches the screen)
10319: # Reset string 1 sets:
10320: # ^^FA - all terminal defaults except scroll rate
10321: # Reset string 2 sets:
10322: # ^^F] - horizontal scrolling disabled
10323: # ^^FT0 - jump scrolling
10324: #
10325: d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
10326: mc5i,
10327: acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
10328: cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
10329: enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
10330: ich1=^^J, il1=^^FH,
10331: is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
10332: ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
10333: rs1=^^FA, rs2=\036F]\036FT0,
10334: sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
10335: sgr0=\017\025\035\036E\036O, smacs=^^N,
10336: vpa=\020\177%p1%c, use=d210-dg,
10337:
10338: # DASHER D410/D460 series terminals in ANSI mode.
10339: # These add a large number of intelligent terminal features.
10340: #
10341: # Initialization string 1 sets:
10342: # \E[<0;<1;<2;<4l
10343: # <0 - scrolling enabled
10344: # <1 - blink enabled
10345: # <2 - horizontal scrolling enabled (for alignment)
10346: # <4 - print characters regardless of attributes
10347: # \E[5;0v - normal (80 column) mode
10348: # \E[1;1;80w - margins at columns 1 and 80
10349: # \E[1;6;<2h
10350: # 1 - print all characters even if protected
10351: # 6 - character protection disabled
10352: # <2 - horizontal scrolling disabled
10353: # - (should reset scrolling regions, but that glitches the screen)
10354: #
10355: # Initialization string 2 sets:
10356: # \E[3;2;2;1;1;1v
10357: # 3;2 - default cursor (solid rectangle)
10358: # 2;1 - 8 bit operations
10359: # 1;1 - international keyboard language
10360: # \E(B - default primary character set (U.S. ASCII)
10361: # \E)4 - default secondary character set (international)
10362: # ^O - primary character set
10363: #
10364: # Reset string 1 sets:
10365: # \Ec - initial mode defaults (RIS)
10366: # \E[<2h - horizontal scrolling disabled
10367: #
10368: # Reset string 2 sets:
10369: # \E[4;0;2;1;1;1v
10370: # 4;0 - jump scrolling
10371: # 2;1 - 8 bit operations
10372: # 1;1 - 8 bit (international) keyboard language
10373: # \E(B - default primary character set (U.S. ASCII)
10374: # \E)4 - default secondary character set (international)
10375: #
10376: d410|d411|d460|d461|Data General DASHER D410/D460 series,
10377: mc5i,
10378: acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
10379: cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
10380: dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
10381: is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
10382: is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
10383: ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
10384: rs2=\E[4;0;2;1;1;1v\E(B\E)4,
10385: sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
10386: sgr0=\E[m\E)4\017, smacs=\E)6\016,
10387: use=d211,
10388:
10389: # Initialization string 2 sets:
10390: # \E[3;2;2;0;1;0v
10391: # 3;2 - default cursor (solid rectangle)
10392: # 2;0 - 7 bit operations
10393: # 1;0 - 7 bit (native) keyboard language
10394: # \E(0 - default character set (the keyboard native language)
10395: # ^O - primary character set
10396: #
10397: # Reset string 2 sets:
10398: # \E[4;0;2;0;1;0v
10399: # 4;0 - jump scrolling
10400: # 2;0 - 7 bit operations
10401: # 1;0 - 7 bit (native) keyboard language
10402: # \E(0 - default character set (the keyboard native language)
10403: #
10404: d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
10405: km@,
10406: enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
10407: rs2=\E[4;0;2;0;1;0v\E(0,
10408: sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
10409: sgr0=\E[m\017, smacs=^N,
10410: use=dgkeys+7b, use=d410,
10411:
10412: d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
10413: km,
10414: enacs@, rmacs=\036FS00,
10415: sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
10416: sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
10417: use=d400-dg,
10418:
10419: # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
10420: #
10421: # Initialization string 1 sets:
10422: # \E[<0;<1;<2;<4l
10423: # <0 - scrolling enabled
10424: # <1 - blink enabled
10425: # <2 - horizontal scrolling enabled (for alignment)
10426: # <4 - print characters regardless of attributes
10427: # \E[5;1v - compressed (135 column) mode
10428: # \E[1;1;126 - margins at columns 1 and 126
10429: # \E[1;6;<2h
10430: # 1 - print all characters even if protected
10431: # 6 - character protection disabled
10432: # <2 - horizontal scrolling disabled
10433: # - (should reset scrolling regions, but that glitches the screen)
10434: #
10435: # Reset string 1 sets:
10436: # \Ec - initial mode defaults (RIS)
10437: # \E[5;1v - compressed (135 column) mode
10438: # \E[1;1;126w - margins at columns 1 and 126
10439: # \E[<2h - horizontal scrolling disabled
10440: #
10441: d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
10442: cols#126,
10443: is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
10444: rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h,
10445: use=d410,
10446:
10447: d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
10448: cols#126,
10449: is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
10450: rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h,
10451: use=d410-7b,
10452:
10453: d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
10454: use=d410-dg,
10455:
10456: # These add intelligent features like scrolling regions.
10457: d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
10458: civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
10459: cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
10460: home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
10461: is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
10462: ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
10463: rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
10464: vpa=\036FPFF%p1%2.2X,
10465: wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, use=d216+,
10466: d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
10467: cols#132,
10468: is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
10469: rs2=\036P@1\036FK\036FX0083,
10470: wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X, use=d412-unix,
10471: d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
10472: lines#25,
10473: is3=\036Fz2,
10474: wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, use=d462+,
10475: d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
10476: eslok, hs,
10477: clear=\036FG\036PH, fsl=\036F}01\022,
10478: is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
10479: tsl=\036F}00\036FP%p1%2.2X18\036PG,
10480: wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X, use=d462+,
10481:
10482: # Relative cursor motions are confined to the current window,
10483: # which is not what the scrolling region specification expects.
10484: # Thus, relative vertical cursor positioning must be deleted.
10485: d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
10486: csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
10487: cud1@, cuu1@, ll@,
10488: use=d462+,
10489:
10490: d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
10491: use=d412-unix,
10492: d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
10493: use=d412-unix-w,
10494: d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
10495: use=d412-unix-25,
10496: d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
10497: use=d412-unix-s,
10498: d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
10499: use=d412-unix-sr,
10500:
10501: d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
10502: use=d413-unix,
10503: d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
10504: use=d413-unix-w,
10505: d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
10506: use=d413-unix-25,
10507: d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
10508: use=d413-unix-s,
10509: d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
10510: use=d413-unix-sr,
10511:
10512: d430c-dg|d430-dg|Data General D430C in DG mode,
10513: use=d413-dg, use=dg+fixed,
10514: d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
10515: use=d413-dg, use=dg+ccc,
10516:
10517: d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
10518: use=d413-unix, use=dgunix+fixed,
10519: d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
10520: use=d413-unix-w, use=dgunix+fixed,
10521: d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
10522: use=d413-unix-25, use=dgunix+fixed,
10523: d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
10524: use=d413-unix-s, use=dgunix+fixed,
10525: d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
10526: use=d413-unix-sr, use=dgunix+fixed,
10527: d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
10528: use=d413-unix, use=dgunix+ccc,
10529: d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
10530: use=d413-unix-w, use=dgunix+ccc,
10531: d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
10532: use=d413-unix-25, use=dgunix+ccc,
10533: d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
10534: use=d413-unix-s, use=dgunix+ccc,
10535: d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
10536: use=d413-unix-sr, use=dgunix+ccc,
10537:
10538: # DASHER D470C color terminal in ANSI mode.
10539: # Like the D460 but with 16 colors and without a compressed mode.
10540: #
10541: # Initialization string 1 sets:
10542: # \E[<0;<1;<2;<4l
10543: # <0 - scrolling enabled
10544: # <1 - blink enabled
10545: # <2 - horizontal scrolling enabled (for alignment)
10546: # <4 - print characters regardless of attributes
10547: # \E[1;1;80w - margins at columns 1 and 80
10548: # \E[1;6;<2h
10549: # 1 - print all characters even if protected
10550: # 6 - character protection disabled
10551: # <2 - horizontal scrolling disabled
10552: # - (should reset scrolling regions, but that glitches the screen)
10553: #
10554: d470c|d470|Data General DASHER D470C,
10555: is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
10556: sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
10557: use=dg+color, use=d460,
10558:
10559: d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
10560: is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
10561: sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
10562: use=dg+color, use=d460-7b,
10563:
10564: # Initialization string 2 sets:
10565: # ^^FQ2 - default cursor (solid rectangle)
10566: # ^^FW - character protection disabled
10567: # ^^F\^ - horizontal scrolling enabled (for alignment)
10568: # ^^FX004? - margins at columns 0 and 79
10569: # ^^F] - horizontal scrolling disabled
10570: # ^^O - primary character set
10571: # ^^FS00 - default character set (the keyboard native language)
10572: # - (should reset scrolling regions, but that glitches the screen)
10573: #
10574: d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
10575: is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
10576: use=dgmode+color, use=d460-dg,
10577:
10578: # DASHER D555 terminal in ANSI mode.
10579: # Like a D411, but has an integrated phone.
10580: d555|Data General DASHER D555,
10581: use=d411,
10582: d555-7b|Data General DASHER D555 in 7-bit mode,
10583: use=d411-7b,
10584: d555-w|Data General DASHER D555 in wide mode,
10585: use=d411-w,
10586: d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
10587: use=d411-7b-w,
10588: d555-dg|Data General DASHER D555 series in DG mode,
10589: use=d411-dg,
10590:
10591: # DASHER D577 terminal in ANSI mode.
10592: # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
10593: d577|Data General DASHER D577,
10594: use=d411,
10595: d577-7b|Data General DASHER D577 in 7-bit mode,
10596: use=d411-7b,
10597: d577-w|Data General DASHER D577 in wide mode,
10598: use=d411-w,
10599: d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
10600: use=d411-7b-w,
10601:
10602: d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
10603: use=d411-dg,
10604:
10605: # DASHER D578 terminal.
10606: # Like a D577, but without compressed mode; like a D470C in this respect.
10607: #
10608: # Initialization string 1 sets:
10609: # \E[<0;<1;<2;<4l
10610: # <0 - scrolling enabled
10611: # <1 - blink enabled
10612: # <2 - horizontal scrolling enabled (for alignment)
10613: # <4 - print characters regardless of attributes
10614: # \E[1;1;80w - margins at columns 1 and 80
10615: # \E[1;6;<2h
10616: # 1 - print all characters even if protected
10617: # 6 - character protection disabled
10618: # <2 - horizontal scrolling disabled
10619: # - (should reset scrolling regions, but that glitches the screen)
10620: #
10621: d578|Data General DASHER D578,
10622: is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
10623: d578-7b|Data General DASHER D578 in 7-bit mode,
10624: is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
10625: use=d577-7b,
1.1 millert 10626:
10627: #### Datamedia (dm)
10628: #
1.14 millert 10629: # Datamedia was headquartered in Nashua, New Hampshire until it went
10630: # out of business in 1993, but the ID plates on the terminals referred
10631: # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
10632: # manufacturer which threw out all information about the terminals.
1.11 millert 10633: #
10634:
10635: cs10|colorscan|Datamedia Color Scan 10,
10636: msgr,
10637: cols#80, lines#24,
10638: bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10639: cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
10640: ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10641: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
10642: sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10643: cs10-w|Datamedia Color Scan 10 with 132 columns,
10644: cols#132,
10645: cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
1.1 millert 10646:
10647: # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
10648: dm1520|dm1521|datamedia 1520,
1.11 millert 10649: OTbs, am, xenl,
1.1 millert 10650: cols#80, it#8, lines#24,
10651: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
1.11 millert 10652: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
10653: home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
10654: khome=^Y,
1.1 millert 10655: # dm2500: this terminal has both <ich> and <smir>. Applications using
10656: # termcap/terminfo directly (rather than through ncurses) might be confused.
10657: dm2500|datamedia2500|datamedia 2500,
1.11 millert 10658: OTbs, OTnc,
1.1 millert 10659: cols#80, lines#24,
10660: bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
10661: cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
1.11 millert 10662: dch1=\020\010\030\035$<10*>,
10663: dl1=\020\032\030\035$<10*>, el=^W, home=^B,
10664: ich1=\020\034\030\035$<10*>,
10665: il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
10666: rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
10667: smdc=^P, smir=^P, smso=^N,
1.1 millert 10668: # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
10669: # also, has a meta-key.
10670: # From: <goldberger@su-csli.arpa>
10671: # (dmchat: ":MT:" changed to ":km:" -- esr)
10672: dmchat|dmchat version of datamedia 2500,
10673: km,
10674: dl1=\020\032\030\035$<2/>,
1.11 millert 10675: il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
1.1 millert 10676: # (dm3025: ":MT:" changed to ":km:" -- esr)
10677: dm3025|datamedia 3025a,
1.11 millert 10678: OTbs, km,
1.1 millert 10679: cols#80, it#8, lines#24,
10680: bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
10681: cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
1.11 millert 10682: dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
10683: home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
10684: is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
10685: smir=\EP, smso=\EO1,
1.1 millert 10686: dm3045|datamedia 3045a,
1.11 millert 10687: OTbs, am, eo, km@, ul, xenl,
10688: dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
10689: kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
10690: kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
10691: khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
10692: use=dm3025,
1.1 millert 10693: # Datamedia DT80 soft switches:
10694: # 1 0=Jump 1=Smooth
10695: # Autorepeat 0=off 1=on
10696: # Screen 0=Dark 1=light
10697: # Cursor 0=u/l 1=block
10698: #
10699: # 2 Margin Bell 0=off 1=on
10700: # Keyclick 0=off 1=on
10701: # Ansi/VT52 0=VT52 1=Ansi
10702: # Xon/Xoff 0=Off 1=On
10703: #
10704: # 3 Shift3 0=Hash 1=UK Pound
10705: # Wrap 0=Off 1=On
10706: # Newline 0=Off 1=On
10707: # Interlace 0=Off 1=On
10708: #
10709: # 4 Parity 0=Odd 1=Even
10710: # Parity 0=Off 1=On
10711: # Bits/Char 0=7 1=8
10712: # Power 0=60Hz 1=50Hz
10713: #
10714: # 5 Line Interface 0=EIA 1=Loop
10715: # Aux Interface 0=EIA 1=Loop
10716: # Local Copy 0=Off 1=On
10717: # Spare
10718: #
10719: # 6 Aux Parity 0=Odd 1=Even
10720: # Aux Parity 0=Off 1=On
10721: # Aux Bits/Char 0=7 1=8
10722: # CRT Saver 0=Off 1=On
10723: # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
10724: dm80|dmdt80|dt80|datamedia dt80/1,
10725: clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
10726: cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1.11 millert 10727: home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
10728: rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10729: use=vt100,
1.1 millert 10730: # except in 132 column mode, where it needs a little padding.
10731: # This is still less padding than the vt100, and you can always turn on
10732: # the ^S/^Q handshaking, so you can use vt100 flavors for things like
10733: # reverse video.
10734: dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
10735: cols#132,
1.11 millert 10736: clear=\E[H\E[2J$<50/>, cud1=^J,
10737: cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
10738: ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
1.14 millert 10739: # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
1.11 millert 10740: dt80-sas|Datamedia DT803/DTX for SAS usage,
10741: am, bw,
10742: cols#80, lines#24,
10743: acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
10744: bel=^G, clear=^L, cr=^M,
10745: csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
10746: cub1=^H, cud1=\EB, cuf1=^\,
10747: cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
10748: el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
10749: is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
10750: kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
10751: rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
10752: smso=\E$2\004, tbc=\E'0,
1.1 millert 10753:
10754: # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
10755: # These aren't end-all Excel termcaps; but do insert/delete char/line
10756: # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
10757: # The naming convention has been bent somewhat, with the use of E? (where
10758: # E is for 'Excel') as # a name. This was done to distinguish the entries
10759: # from the other Datamedias in use here, and yet to associate a model of
10760: # the Excel terminals with the regular datamedia terminals that share
10761: # major characteristics.
10762: excel62|excel64|datamedia Excel 62,
10763: dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
10764: kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
10765: use=dt80,
10766: excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
10767: dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
10768: kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
10769: use=dt80w,
10770: excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
10771: dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
10772: kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
10773: smir=\E[4h,
10774: use=dt80,
10775:
10776: #### Falco
10777: #
10778: # Falco Data Products
10779: # 440 Potrero Avenue
10780: # Sunnyvale, CA 940864-196
10781: # Vox: (800)-325-2648
10782: # Fax: (408)-745-7860
10783: # Net: techsup@charm.sys.falco.com
10784: #
10785: # Current Falco models as of 1995 are generally ANSI-compatible and support
10786: # emulations of DEC VT-series, Wyse, and Televideo types.
10787: #
10788:
10789: # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
10790: # This terminal was released around 1983 and was discontinued long ago.
10791: # The standout and underline highlights are the same.
10792: falco|ts1|ts-1|falco ts-1,
1.11 millert 10793: OTbs, am,
1.1 millert 10794: cols#80, it#8, lines#24,
10795: bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10796: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10797: dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
10798: ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
1.11 millert 10799: kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
10800: smir=\Eq, smso=\Eg1, smul=\Eg1,
1.1 millert 10801: falco-p|ts1p|ts-1p|falco ts-1 with paging option,
1.11 millert 10802: OTbs, am, da, db, mir, msgr, ul,
1.1 millert 10803: cols#80, it#8, lines#24,
1.11 millert 10804: bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
10805: cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
10806: dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
1.1 millert 10807: il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
1.11 millert 10808: kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
10809: rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
10810: smso=\Eg4, smul=\Eg1,
1.1 millert 10811: # (ts100: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 10812: ts100|ts100-sp|falco ts100-sp,
10813: am, mir, msgr, xenl, xon,
10814: cols#80, it#8, lines#24, vt#3,
10815: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10816: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10817: clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10818: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
10819: cuf=\E[%p1%dC, cuf1=\E[C$<2>,
10820: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
10821: cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
10822: el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
10823: ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
10824: ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn,
10825: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM,
10826: kf0=\EOy, kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10827: kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
10828: rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
10829: rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
10830: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
10831: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
10832: sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
10833: smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
10834: ts100-ctxt|falco ts-100 saving context,
10835: rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
1.1 millert 10836:
10837: #### Florida Computer Graphics
10838: #
10839:
10840: # Florida Computer Graphics Beacon System, using terminal emulator program
10841: # "host.com", as provided by FCG. This description is for an early release
10842: # of the "host" program. Known bug: <ed> clears the whole screen, so it's
10843: # commented out.
10844:
10845: # From: David Bryant <cbosg!djb> 1/7/83
1.11 millert 10846: beacon|FCG Beacon System,
1.1 millert 10847: am, da, db,
1.11 millert 10848: cols#80, lines#32,
10849: bel=\ESTART\r\E37\r\EEND\r$<1>,
10850: blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
10851: cub1=^H, cud1=^J, cuf1=\EV,
10852: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
10853: dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
10854: ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
10855: rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
10856: rmul=\ESTART\r\E60\,0\r\EEND\r,
10857: sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
10858: smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
10859: smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
10860: smul=\ESTART\r\E60\,1\r\EEND\r,
1.1 millert 10861:
10862: #### Fluke
10863: #
10864:
10865: # The f1720a differences from ANSI: no auto margin, destructive
10866: # tabs, # of lines, funny highlighting and underlining
10867: f1720|f1720a|fluke 1720A,
10868: xt,
10869: cols#80, lines#16, xmc#1,
10870: bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
1.11 millert 10871: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
10872: el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
10873: kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
10874: smso=\E[7m, smul=\E[4m,
1.1 millert 10875:
10876: #### Liberty Electronics (Freedom)
10877: #
10878: # Liberty Electronics
10879: # 48089 Fremont Blvd
10880: # Fremont CA 94538
10881: # Vox: (510)-623-6000
10882: # Fax: (510)-623-7021
10883:
10884: # From: <faletti@berkeley.edu>
10885: # (f100: added empty <acsc> to suppress a tic warning;
10886: # made this relative to adm+sgr -- note that <invis> isn't
10887: # known to work for f100 but does on the f110. --esr)
1.11 millert 10888: f100|freedom|freedom100|freedom model 100,
10889: OTbs, am, bw, hs, mir, msgr, xon,
10890: cols#80, lines#24,
10891: acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
10892: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10893: dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
10894: flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
10895: ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
10896: is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
10897: kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
10898: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10899: kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
10900: smacs=\E%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
10901: vpa=\E[%p1%{32}%+%c, use=adm+sgr,
10902: f100-rv|freedom-rv|freedom 100 in reverse video,
10903: flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
1.1 millert 10904: # The f110 and f200 have problems with vi(1). They use the ^V
10905: # code for the down cursor key. When kcud1 is defined in terminfo
10906: # as ^V, the Control Character Quoting capability (^V in insert mode)
10907: # is lost! It cannot be remapped in vi because it is necessary to enter
10908: # a ^V to to quote the ^V that is being remapped!!!
10909: #
10910: # f110/f200 users will have to decide whether
10911: # to lose the down cursor key or the quoting capability. We will opt
10912: # initially for leaving the quoting capability out, since use of VI
10913: # is not generally applicable to most interactive applications
10914: # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
10915: f110|freedom110|Liberty Freedom 110,
10916: bw@, eslok,
10917: it#8, wsl#80,
1.11 millert 10918: blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
10919: cvvis=\E.2, dim=\EG@, dl1=\ER, dsl=\Ef\r,
10920: flash=\Eb$<200/>\Ed, il1=\EE, ip@, is2@, kclr=^^, kdch1=\EW,
10921: kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf10@, kich1=\EQ,
10922: kil1=\EE, mc4=\Ea, mc5=\E`, ri=\EJ, rmacs=\E%%, rmir=\Er\EO,
10923: smacs=\E$, smir=\EO\Eq, smso=\EG<, tsl=\Ef,
10924: use=f100,
10925: f110-14|Liberty Freedom 110 14inch,
10926: dch1@, use=f110,
10927: f110-w|Liberty Freedom 110 - 132 cols,
10928: cols#132, use=f110,
10929: f110-14w|Liberty Freedom 110 14in/132 cols,
10930: cols#132,
10931: dch1@, use=f110,
1.1 millert 10932: # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
1.11 millert 10933: f200|freedom200|Liberty Freedom 200,
10934: OTbs, am, eslok, hs, mir, msgr, xon,
10935: cols#80, it#8, lines#24, wsl#80,
10936: acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
10937: clear=^Z, cnorm=\E.1, cr=^M,
10938: csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
10939: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10940: cvvis=\E.1, dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY,
10941: el=\ET, flash=\Eo$<200/>\En, fsl=^M, home=^^,
10942: hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
10943: kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10944: kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
10945: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10946: kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
10947: ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
10948: tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c,
10949: use=adm+sgr,
10950: f200-w|Liberty Freedom 200 - 132 cols,
10951: cols#132, use=f200,
1.1 millert 10952: # The f200 has the ability to reprogram the down cursor key. The key is
10953: # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
10954: # so powering the terminal off and on will not cause the change to be lost.
10955: f200vi|Liberty Freedom 200 for vi,
1.11 millert 10956: flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
10957: f200vi-w|Liberty Freedom 200 - 132 cols for vi,
10958: cols#132, use=f200vi,
1.1 millert 10959:
10960: #### GraphOn (go)
10961: #
10962: # Graphon Corporation
10963: # 544 Division Street
10964: # Campbell, CA 95008
10965: # Vox: (408)-370-4080
10966: # Fax: (408)-370-5047
10967: # Net: troy@graphon.com (Troy Morrison)
10968: #
10969: #
10970: # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
10971: # including one odd hybrid that starts out life on power-up as a character
10972: # terminal, than can be switched to X graphics mode (driven over the serial
10973: # line) by an escape sequence. No info on this beast yet.
10974: # (go140: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 10975: go140|graphon go-140,
10976: OTbs,
10977: cols#80, it#8, lines#24,
1.1 millert 10978: clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
1.11 millert 10979: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
10980: ed=\E[J$<10/>, el=\E[K, ht=^I,
1.1 millert 10981: if=/usr/share/tabset/vt100, il1=\E[L,
10982: is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
1.11 millert 10983: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
10984: kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
10985: rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
10986: rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
10987: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
1.1 millert 10988: go140w|graphon go-140 in 132 column mode,
1.11 millert 10989: am,
1.1 millert 10990: cols#132,
1.11 millert 10991: is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, use=go140,
1.1 millert 10992: # Hacked up vt200 termcap to handle GO-225/VT220
10993: # From: <edm@nwnexus.WA.COM>
10994: # (go225: I added <rmam>/<smam> based on the init string -- esr)
10995: go225|go-225|Graphon 225,
1.11 millert 10996: OTbs, am, mir, xenl,
10997: cols#80, it#8, lines#25, vt#3,
10998: blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
10999: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
11000: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
11001: ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
11002: is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
11003: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
11004: kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
1.1 millert 11005: rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
1.11 millert 11006: rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
11007: rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
11008: sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
11009: smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
1.1 millert 11010:
1.11 millert 11011: #### Harris (Beehive)
1.1 millert 11012: #
11013: # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
11014: # Their terminal group is ancient history now (1995) though the parent
11015: # company is still in business.
11016: #
11017:
1.11 millert 11018: # Beehive documentation is undated and marked Preliminary and has no figures
11019: # so we must have early Superbee2 (Model 600, according to phone conversation
11020: # with mfr.). It has proved reliable except for some missing padding
11021: # (notably after \EK and <nl> at bottom of screen).
11022: #
11023: # The key idea is that AEP mode is poison for <cup> & that US's in
11024: # the local memory should be avoided like the plague. That means
11025: # that the 2048 character local buffer is used as 25 lines of 80
11026: # characters, period. No scrolling local memory, folks. It also
11027: # appears that we cannot use naked INS LINE feature since it uses
11028: # US. The sbi fakes <il1> with an 80-space insert that may be too
11029: # slow at low speeds; also spaces get converted to \040 which is
11030: # too long for some programs (not vi). DEL LINE is ok but slow.
11031: #
11032: # The <nl> string is designed for last line of screen ONLY; cup to
11033: # 25th line corrects the motion inherent in scrolling to Page 1.
11034: #
11035: # There is one understood bug. It is that the screen appears to
11036: # pop to a new (blank) page after a <nel>, or leave a half-line
11037: # ellipsis to a quad that is the extra 48 memory locations. The
11038: # data received is dumped into memory but not displayed. Not to
11039: # worry if <cup> is being used; the lines not displayed will be,
11040: # whenever the cursor is moved up there. Since <cup> is addressed
11041: # relative to MEMORY of window, nothing is lost; but beware of
11042: # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
11043: # therefore, is setenv MORE -c .
11044: #
11045: # WARNING: Not all features tested.
11046: #
11047: # Timings are assembled from 3 sources. Some timings may reflect
11048: # SB2/Model 300 that were used if more conservative.
11049: # Tested on a Model 600 at 1200 and 9600 bd.
11050: #
11051: # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
11052: # placed on the keyboard and useless because of AEP, is made
11053: # into a backspace key. In use ESC must be pressed twice (to send)
11054: # and sending ^C must be prefixed by ESC to avoid that weird
11055: # transmit mode associated with ENTER key.
11056: #
11057: # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
11058: # the screen, then it has dropped into ENTER mode; hit
11059: # RESET--ONLINE--!tset.
11060: #
11061: # As delivered this machine has a FATAL feature that will throw
11062: # it into that strange transmit state (SPOW) if the space bar is
11063: # hit after a CR is received, but before receiving a LF (or a
11064: # few others).
11065: #
11066: # The circuits MUST be modified to eliminate the SPOW latch.
11067: # This is done by strapping on chip A46 of the I/O board; cut
11068: # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
11069: # chip. This mod has been checked out on a Mod 600 of Superbee II.
11070: # With this modification absurdly high timings on cr are
11071: # unnecessary.
11072: #
11073: # NOTE WELL that the rear panel switch should be set to CR/LF,
11074: # not AEP!
11075: #
11076: sb1|beehive superbee,
11077: OTbs, am, bw, da, db, mir, ul, xsb,
11078: cols#80, lines#25, xmc#1,
11079: bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
11080: cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
11081: cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
11082: el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
11083: il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
11084: ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
11085: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
11086: kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
11087: kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
11088: krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
11089: rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
11090: smso=\E_1, smul=\E_0, tbc=\E3,
11091: sbi|superbee|beehive superbee at Indiana U.,
11092: xsb,
11093: cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA, use=sb1,
11094: # Alternate (older) description of Superbee - f1=escape, f2=^C.
11095: # Note: there are at least 3 kinds of superbees in the world. The sb1
11096: # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
11097: # The sb3 puts garbage on the bottom of the screen when you scroll with
11098: # the switch in the back set to CRLF instead of AEP. This description
11099: # is tested on the sb2 but should work on all with either switch setting.
11100: # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
11101: # the other two if you want to try to hit that tiny escape key.
11102: # This description is tricky: being able to use cup depends on there being
11103: # 2048 bytes of memory and the hairy <nl> string.
11104: superbee-xsb|beehive super bee,
11105: am, da, db, xsb,
11106: cols#80, it#8, lines#25,
11107: clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
11108: cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
11109: dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
11110: home=\EH, ht=^I, hts=\E1,
11111: ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
11112: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
11113: kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
11114: khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
11115: # This loses on lines > 80 chars long, use at your own risk
11116: superbeeic|super bee with insert char,
11117: ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
11118: sb2|sb3|fixed superbee,
11119: xsb@, use=superbee,
11120:
1.14 millert 11121: #### Beehive Medical Electronics
11122: #
11123: # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
11124: # Regarding your question though; Beehive terminals weren't made by Harris.
11125: # They were made by Beehive Medical Electronics in Utah. They went out of
11126: # business in the early '80s.
11127: #
11128: # (OK, then, I don't know why a couple of these say "harris beehive".)
11129: #
11130:
1.11 millert 11131: # Reports are that most of these Beehive entries (except superbee) have not
11132: # been tested and do not work right. <rmso> is a trouble spot. Be warned.
11133:
11134: # (bee: <ich1> was empty, which is obviously bogus -- esr)
11135: beehive|bee|harris beehive,
11136: OTbs, am, mir,
11137: cols#80, lines#24,
11138: cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
11139: cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
11140: dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
11141: kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11142: kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
11143: krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
11144: smir=\EQ, smso=\EdP, smul=\Ed`,
11145: # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
11146: # good grief - does this entry make :sg:/:ug: when it doesn't have to?
11147: # look at those spaces in <rmso>/<smso>. Seems strange to me...
11148: # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
11149: # really care, cook up one using ^F -- esr)
11150: beehive3|bh3m|beehiveIIIm|harris beehive 3m,
11151: OTbs, am,
11152: cols#80, it#8, lines#20,
11153: bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
11154: dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
11155: il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
11156: beehive4|bh4|beehive 4,
11157: am,
11158: cols#80, lines#24,
11159: bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
11160: cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
1.14 millert 11161: # There was an early Australian kit-built computer called a "Microbee".
11162: # It's not clear whether this is for one of those or for a relative
11163: # of the Beehive.
1.11 millert 11164: microb|microbee|micro bee series,
11165: OTbs, am,
11166: cols#80, it#8, lines#24,
11167: bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
11168: cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
11169: el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
11170: kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
11171: kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
11172: rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
11173:
1.1 millert 11174: # 8675, 8686, and bee from Cyrus Rahman
11175: # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
11176: ha8675|harris 8675,
11177: is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
1.11 millert 11178: kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
11179: kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
11180: kf8=\177, kf9=\Ee,
11181: use=bee,
1.1 millert 11182: # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
11183: # in :is: -- esr)
11184: ha8686|harris 8686,
11185: is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
1.11 millert 11186: kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
11187: kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
11188: kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
11189: kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
11190: use=bee,
1.1 millert 11191:
11192: #### Hazeltine
11193: #
11194: # Hazeltine appears to be out of the terminal business as of 1995. These
11195: # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
11196: # Harris. They have a hazeltine.com domain (but no web page there ) and can
11197: # be reached at:
11198: #
11199: # Hazeltine
11200: # 450 East Pulaski Road
11201: # Greenlawn, New York 11740
11202: #
11203: # As late as 1993, manuals for the terminal product line could still be
11204: # purchased from:
11205: #
11206: # TRW Customer Service Division
11207: # 15 Law Drive
11208: # P.O. Box 2076
11209: # Fairfield, NJ 07007-2078
11210: #
11211: # They're now (1998) a subsidiary of General Electric, operating under the
11212: # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
11213: # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
11214: #
11215:
11216: # Since <cuf1> is blank, when you want to erase something you
11217: # are out of luck. You will have to do ^L's a lot to
11218: # redraw the screen. h1000 is untested. It doesn't work in
11219: # vi - this terminal is too dumb for even vi. (The code is
11220: # there but it isn't debugged for this case.)
11221: hz1000|hazeltine 1000,
1.11 millert 11222: OTbs,
11223: cols#80, lines#12,
11224: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
11225: ind=^J,
1.1 millert 11226: # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
11227: hz1420|hazeltine 1420,
1.11 millert 11228: OTbs, am,
1.1 millert 11229: cols#80, lines#24,
11230: bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
11231: cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
11232: ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
11233: smso=\E^_,
11234: # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
11235: # freakout with out-of-range args and tn3270. No hz since it needs to
11236: # receive tildes.
11237: hz1500|hazeltine 1500,
1.11 millert 11238: OTbs, am, hz,
1.1 millert 11239: cols#80, lines#24,
11240: bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
1.11 millert 11241: cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
11242: cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
11243: il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
11244: kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
1.1 millert 11245: # h1510 assumed to be in sane escape mode. Else use h1500.
11246: # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
11247: # <smso=\E^Y>, but these caps were commented out in 8.3; also,
11248: # removed incorrect and overridden ":do=^J:" -- esr)
11249: hz1510|hazeltine 1510,
1.11 millert 11250: OTbs, am,
1.1 millert 11251: cols#80, lines#24,
11252: bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
11253: cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
11254: el=\E^O, il1=\E^Z, ind=^J,
11255: # Hazeltine 1520
11256: # The following switch settings are assumed for normal operation:
11257: # FULL CR U/L_CASE ESCAPE
11258: # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
11259: # Other switches may be set for operator convenience or communication
11260: # requirements.
11261: hz1520|Hazeltine 1520,
11262: OTbs, am, bw, msgr,
11263: cols#80, lines#24,
11264: bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
11265: cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
11266: ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
11267: kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
11268: kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
11269: rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
11270: # This version works with the escape switch off
11271: # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
11272: hz1520-noesc|hazeltine 1520,
11273: am, hz,
11274: cols#80, lines#24,
11275: bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
1.11 millert 11276: cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
11277: home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
1.1 millert 11278: # Note: the h1552 appears to be the first Hazeltine terminal which
11279: # is not braindamaged. It has tildes and backprimes and everything!
11280: # Be sure the auto lf/cr switch is set to cr.
11281: hz1552|hazeltine 1552,
1.11 millert 11282: OTbs,
11283: cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
11284: lf2=red, lf3=green,
11285: use=vt52,
1.1 millert 11286: hz1552-rv|hazeltine 1552 reverse video,
1.11 millert 11287: cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
1.1 millert 11288: # Note: h2000 won't work well because of a clash between upper case and ~'s.
11289: hz2000|hazeltine 2000,
11290: OTbs, OTnc, am,
11291: cols#74, lines#27,
1.11 millert 11292: bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
11293: cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
11294: il1=~\032$<6>, ind=^J, pad=\177,
1.1 millert 11295: # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
11296: # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
11297: # to work ok. There is one problem though if one types a lot of garbage
11298: # characters very fast vi seems not able to keep up and hangs while trying
11299: # to insert. That's in insert mode while trying to insert in the middle of
11300: # a line. It might be because the Esprit doesn't have insert char and delete
11301: # char as a built in function. Vi has to delete to end of line and then
11302: # redraw the rest of the line.
1.11 millert 11303: esprit|Hazeltine Esprit I,
11304: OTbs, am, bw,
11305: cols#80, lines#24,
11306: bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
11307: cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
11308: ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
11309: kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
11310: kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
11311: kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
11312: lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
11313: rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
1.1 millert 11314: esprit-am|hazeltine esprit auto-margin,
1.11 millert 11315: am, use=esprit,
1.1 millert 11316: # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
11317: # Vi it seems always wants to send a control J for "do" and it turned out
11318: # that the terminal would work somewhat if the auto LF/CR was turned off.
11319: # (hmod1: removed :dn=~^K: -- esr)
11320: hmod1|Hazeltine Modular 1,
11321: OTbs, am, hz,
11322: cols#80, lines#24,
11323: bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
1.11 millert 11324: cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
11325: ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
11326: rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
1.1 millert 11327: #
11328: # Hazeltine Executive 80 Model 30 (1554?)
11329: # from Will Martin <control@ALMSA-1.ARPA> via BRL
11330: # Like VT100, except for different "am" behavior.
11331: hazel|exec80|h80|he80|Hazeltine Executive 80,
11332: OTbs, OTpt, am,
11333: cols#80, it#8, lines#24, vt#3,
11334: OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
11335: clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11336: cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
11337: cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
11338: ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
11339: is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
11340: kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
11341: kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
1.11 millert 11342: rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
11343: rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
1.1 millert 11344: rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
11345: sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
11346: smul=\E[4m$<2/>,
11347:
1.11 millert 11348: #### IBM
1.1 millert 11349: #
11350:
1.11 millert 11351: ibm327x|line mode IBM 3270 style,
11352: gn,
11353: clear=^M^J, el=^M, home=^M,
1.1 millert 11354:
1.11 millert 11355: ibm3101|i3101|IBM 3101-10,
11356: OTbs, am, xon,
11357: cols#80, lines#24,
11358: bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
11359: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
11360: el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
11361: kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
11362: ibm3151|IBM 3151 display,
11363: is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
11364: sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
11365: sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B,
11366: use=ibm3162,
11367: # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
11368: # I've commented out or translated some IBM extensions.
11369: ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
11370: OTbs, am, mir, msgr,
11371: cols#80, it#8, lines#24,
11372: acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
11373: bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
11374: cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
11375: cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
11376: invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
11377: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
11378: kdl1=\EO, ked=\EJ, kel=\EI, kend=\E2, kf1=\Ea\r, kf10=\Ej\r,
11379: kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
11380: kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
11381: kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
11382: kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
11383: kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
11384: kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
11385: knp=\EI, kpp=\EL, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
11386: rmcup=\E>A, rmso=\E4@, rmul=\E4@,
11387: sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
11388: sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
11389:
11390: ibm3161-C|IBM 3161-C NLS terminal using cartridge,
11391: rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B,
11392: use=ibm3161,
11393: ibm3162|IBM 3162 display,
11394: blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
11395: rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
11396: use=ibm3161-C,
1.1 millert 11397:
1.11 millert 11398: ibm3164|i3164|IBM 3164,
11399: msgr,
11400: colors#8, pairs#64,
11401: rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
11402: setb=\E4 %p1%{64}%+%c,
11403: setf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
11404: smcup=\E!9/N\E>B, use=ibm3161,
1.1 millert 11405:
1.11 millert 11406: ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
11407: am, bw, msgr, xon,
11408: cols#80, it#8, lines#25,
11409: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
11410: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
11411: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
11412: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11413: cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
11414: dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
11415: hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
11416: indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
11417: kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11418: kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
1.13 millert 11419: kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
11420: kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
11421: kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
11422: kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
11423: kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
11424: kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
11425: kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
11426: kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
11427: kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
11428: kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
11429: kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
11430: krmir=\E[4l, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
11431: rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, sc=\E[s,
1.11 millert 11432: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
11433: sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
1.1 millert 11434:
1.11 millert 11435: ibmaed|IBM Experimental display,
11436: OTbs, am, eo, msgr,
11437: cols#80, it#8, lines#52,
11438: clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
11439: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
11440: dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
11441: il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11442: rmso=\E0, sgr0=\E0, smso=\E0,
11443: ibm-apl|apl|IBM apl terminal simulator,
11444: lines#25, use=dm1520,
11445: # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
11446: # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
11447: ibmmono|IBM workstation monochrome,
11448: eslok, hs,
11449: bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
11450: invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
11451: kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
11452: khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
11453: lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
11454: sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo, use=ibm3101,
11455: ibmega|IBM Enhanced Color Display,
11456: cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
11457: nel=^M^J,
11458: use=ibmmono,
11459: ibm5154|IBM 5154 Color display,
11460: colors#8, pairs#64,
11461: bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
11462: ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
11463: rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
11464: use=ibmmono,
11465: ibmvga-c|IBM VGA display color termcap,
11466: cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
11467: nel=^M^J,
11468: use=ibmega-c,
11469: ibmvga|IBM VGA display,
11470: cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
11471: nel=^M^J,
11472: use=ibmega,
11473: # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
11474: rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
11475: lines#32,
11476: dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
11477: ibm6155|IBM 6155 Black & White display,
11478: blink@, bold@, use=ibm5151,
11479: # Advanced Monochrome (6153) and Color (6154) Graphics Display:
11480: ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
11481: lines#31,
11482: dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
11483: ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
11484: lines#31,
11485: dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmega-c,
11486: ibm6154|IBM 6154 Color displays,
11487: blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
11488: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
11489: sgr0=\E[0;10m,
11490: use=ibm5154,
11491: ibm6153|IBM 6153 Black & White display,
11492: blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
11493: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
11494: sgr0=\E[0;10m,
11495: use=ibm5151,
11496: ibm6153-90|IBM 6153 Black & White display,
11497: cols#90, lines#36,
11498: blink@, bold@, use=ibm5151,
11499: ibm6153-40|IBM 6153 Black & White display,
11500: cols#40, lines#12, use=ibm6153-90,
11501: ibm8512|ibm8513|IBM color VGA Terminal,
11502: am, mir, msgr,
11503: cols#80, it#8, lines#25,
11504: acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
11505: clear=\E[H\E[2J, cub1=\E[D, cud1=^J, cuf1=\E[C,
11506: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
11507: ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
11508: il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
11509: kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
11510: kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
11511: kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
11512: rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
11513: rmir=\E[4l, rmso=\E[m, rmul=\E[m,
11514: rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
11515: smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
11516: smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11517: use=ibm8503,
11518: hft-c|HFT with Color,
11519: colors#8, pairs#64,
11520: acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
11521: setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
11522: use=ibm5151,
11523: hft-c-old|HFT with Color PC850,
11524: colors#8, pairs#64,
11525: setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
1.14 millert 11526: hft|AIWS High Function Terminal,
11527: am, xon,
11528: cols#80, lines#25,
11529: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
11530: cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11531: cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
11532: ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
11533: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11534: kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
11535: kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
11536: kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
11537: ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
11538: sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m,
1.11 millert 11539: ibm-system1|system1|ibm system/1 computer,
11540: am, xt,
11541: cols#80, lines#24,
11542: bel=^G, clear=^Z, cub1=^H, cuf1=^\,
11543: cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
11544: ind=^J,
1.14 millert 11545: # lft-pc850 : IBM Low Function Terminal Device
11546: # lft "supports" underline, bold, and blink in the sense that the lft code
11547: # sets all the right bits. HOWEVER, depending upon the adapter, these
11548: # attributes may or may not be supported by the device driver.
11549: lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
11550: am, bw, msgr, xon,
11551: cols#80, it#8, lines#25,
11552: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
11553: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
11554: cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
11555: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11556: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
11557: dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
11558: home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
11559: il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
11560: kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
11561: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
11562: kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
11563: kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
11564: kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
11565: kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
11566: kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
11567: kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
11568: kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
11569: kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
11570: kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
11571: kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
11572: kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
11573: kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
11574: rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
11575: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
11576: sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11577: tbc=\E[3g,
11578: ibm5081|IBM Megapel Color display,
1.11 millert 11579: acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
11580: s1ds=\E(0, sgr0=\E[0m\E(B,
11581: use=ibm5154,
11582: ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
11583: eslok, hs,
11584: lines#33,
11585: dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, use=ibmega-c,
11586: ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
11587: use=hft-c,
11588: ibm8514|IBM 8514/a color VGA display,
11589: eslok, hs,
11590: dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
11591: ibm8514-c|IBM 8514 color display with standout and underline,
11592: eslok, hs,
11593: lines#41,
11594: cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
11595: kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
11596: use=ibmega-c,
1.1 millert 11597:
11598: #
1.11 millert 11599: # AIX entries. IBM ships these with AIX 3.2.5.
11600: # AIX extension caps are commented out,
11601: # except for box1 which has been translated to an <acsc> string.
1.1 millert 11602: #
1.11 millert 11603: aixterm|IBM Aixterm Terminal Eemulator,
11604: eslok, hs,
11605: acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
11606: fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
11607: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
11608: sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT,
11609: use=ibm6154,
11610: aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
11611: eslok, hs,
11612: acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
11613: fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
11614: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
11615: sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT,
11616: use=ibm6153,
11617: aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
11618: eslok, hs,
11619: bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
11620: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
11621: tsl=\E[?%p1%dT,
11622: use=ibm6153,
11623: jaixterm|IBM Kanji Aixterm Terminal Eemulator,
11624: acsc@, use=aixterm,
11625: jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
11626: acsc@,
11627: use=aixterm-m,
1.1 millert 11628:
1.11 millert 11629: #### Infoton/General Terminal Corp.
1.1 millert 11630: #
11631:
1.11 millert 11632: # gt100 sounds like something DEC would come out with. Let's hope they don't.
11633: i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
11634: OTbs, am,
11635: cols#80, lines#24,
11636: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
11637: cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
11638: ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
11639: ind=^J, rmso=\Ea, smso=\Eb,
11640: i400|infoton 400,
11641: OTbs, am,
11642: cols#80, lines#25,
11643: bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
11644: cup=%i\E[%p1%3d;%p2%3dH, cuu1=\E[A,
11645: dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
11646: il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
11647: # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
11648: addrinfo,
11649: am,
11650: cols#80, lines#24,
11651: bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
11652: cup=\037%p1%{1}%-%c%p2%{1}%-%c, cuu1=^\, ed=^K, home=^H,
11653: ind=^J, ll=^H^\,
11654: # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
11655: infoton,
11656: am,
1.1 millert 11657: cols#80, lines#24,
1.11 millert 11658: bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
11659: ed=^K, ind=^J, ll=^H^\,
1.1 millert 11660:
1.11 millert 11661: # The ICL6402 was actually the Kokusai Display System 6402.
11662: # The 6404 was the KDS7372 (color version of the 6402).
1.1 millert 11663: #
1.11 millert 11664: # ICL6404 control codes follow:
1.1 millert 11665: #
1.11 millert 11666: #code function
11667: #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
11668: #ctrl-A set SOM position at cursor position
11669: #ctrl-G Bell
11670: #ctrl-H Backspace
11671: #ctrl-I Horiz tab
11672: #ctrl-J Linefeed
11673: #ctrl-K Cursor up
11674: #ctrl-L Cursor right
11675: #ctrl-M Carriage return
11676: #ctrl-N Disable xon/xoff to host
11677: #ctrl-O Enable xon/xoff to host
11678: #ctrl-R Enable bidirectional mode
11679: #ctrl-T Disable bidirectional mode
11680: #ctrl-V Cursor down
11681: #ctrl-Z Clear unprotected data to insert char
11682: #ctrl-^ Cursor home
11683: #ctrl-_ Newline
1.1 millert 11684: #
1.11 millert 11685: #ESC lead-in char for multiple character command
1.1 millert 11686: #
1.11 millert 11687: #ESC space R execute power on sequence
11688: #ESC ! p1 p2 define scroll region:
11689: # p1 = scroll top line: 20h - 37h
11690: # p1 = scroll bottom line: 20h - 37h
11691: #ESC " unlock keyboard
11692: #ESC # lock keyboard
11693: #ESC $ Semi-graphics mode on
11694: #ESC % Semi-graphics mode off
11695: #ESC & protect mode on
11696: #ESC ' protect mode off
11697: #ESC ( write protect mode off (full intensity)
11698: #ESC ) write protect mode on (half intensity)
1.1 millert 11699: #
1.11 millert 11700: #ESC * clear screen
11701: #ESC + clear unprotected data to insert char
1.1 millert 11702: #ESC , clear unprotected data to half intensity spaces
11703: #ESC - p1 p2 p3 p4 address cursor to page, row, column:
11704: # p1 = page number 0 - 3
11705: # p2 = row 20h - 7fh
11706: # p3 = column (lo) 20h - 7fh
11707: # p4 = column (hi) 20h - 21h (only 132 col)
11708: #ESC . p1 set cursor style:
11709: # p1 = 0 invisible cursor
11710: # p1 = 1 block blinking cursor
11711: # p1 = 2 block steady cursor
11712: # p1 = 3 underline blinking cursor
11713: # p1 = 4 underline steady cursor
11714: #ESC / transmit cursor location (page, row, column)
11715: #ESC 0 p1 p2 p3 p4 program edit key:
11716: # p1 = edit key code: '@'-'S', '`'-'s'
11717: # p2 p3 p4 = program data (3 bytes)
11718: #
11719: #ESC 1 set tab
11720: #ESC 2 clear tab at cursor
11721: #ESC 3 clear all tabs
11722: #ESC 4 send unprotect line to cursor
11723: #ESC 5 send unprotect page to cursor
11724: #ESC 6 send line to cursor
11725: #ESC 7 send page to cursor
11726: #ESC 8 n set scroll mode:
11727: # n = 0 set jump scroll
11728: # n = 1 set smooth scroll
11729: #ESC 9 n control display:
11730: # n = 0 display off
11731: # n = 1 display on
11732: #ESC : clear unprotected data to null
11733: #ESC ; clear unprotected data to insert char
11734: #
11735: #ESC < keyclick on
11736: #ESC = p1 p2 address cursor to row, column
11737: # p1 = row 20h - 7fh
11738: # p2 = column (lo) 20h - 7fh
11739: # p3 = column (hi) 20h - 21h (only 132 col)
11740: #ESC > keyclick off
11741: #ESC ? transmit cursor location (row, column)
11742: #
11743: #ESC @ copy print mode on
11744: #ESC A copy print mode off
11745: #ESC B block mode on
11746: #ESC C block mode off (conversation mode)
11747: #ESC D F set full duplex
11748: #ESC D H set half duplex
11749: #ESC E line insert
11750: #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
11751: # 0 = black, 1 = red, 2 = green, 3 = yellow
11752: # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
11753: #ESC G n set serial field attribute (n = 30h - 3Fh)
11754: #ESC H n full graphics mode:
11755: # n = 0 exit full graphics mode
11756: # n = 1 enter full graphics mode
11757: #ESC I back tab
11758: #ESC J back page
11759: #ESC K forward page
11760: #
11761: #ESC L unformatted page print
11762: #ESC M L move window left (132 col mode only)
11763: #ESC M R move window right (132 col mode only)
11764: #ESC N set page edit (clear line edit)
11765: #ESC O set line edit (clear page edit)
11766: #ESC P formatted page print
11767: #ESC Q character insert
11768: #ESC R line delete
11769: #ESC S send message unprotected only
11770: #ESC T erase line to insert char
11771: #ESC U set monitor mode (see ESC X, ESC u)
11772: #
11773: #ESC V n select video attribute mode:
11774: # n = 0 serial field attribute mode
11775: # n = 1 parallel character attribute mode
11776: #ESC V 2 n define line attribute:
11777: # n = 0 single width single height
11778: # n = 1 single width double height
11779: # n = 2 double width single height
11780: # n = 3 double width double height
11781: #ESC V 3 n select character font:
11782: # n = 0 system font
11783: # n = 1 user defined font
11784: #ESC V 4 n select screen mode:
11785: # n = 0 page screen mode
11786: # n = 1 virtual screen mode
11787: #ESC V 5 n control mouse mode:
11788: # n = 0 disable mouse
11789: # n = 1 enable sample mode
11790: # n = 2 send mouse information
11791: # n = 3 enable request mode
11792: #ESC W character delete
11793: #ESC X clear monitor mode (see ESC U, ESC u)
11794: #ESC Y erase page to insert char
11795: #
11796: #ESC Z n send user/status line:
11797: # n = 0 send user line
11798: # n = 1 send status line
11799: # n = 2 send terminal ID
11800: #ESC [ p1 p2 p3 set character attribute (parallel char mode):
11801: # p1: 0 = normal
11802: # 1 = blank
11803: # 2 = blink
11804: # 3 = blink blank (= blank)
11805: # 4 = reverse
11806: # 5 = reverse blank
11807: # 6 = reverse blink
11808: # 7 = reverse blink blank (= reverse blank)
11809: # 8 = underline
11810: # 9 = underline blank
11811: # : = underline blink
11812: # ; = underline blink blank
11813: # < = reverse underline
11814: # = = reverse underline blank
11815: # > = reverse underline blink
11816: # ? = reverse underline blink blank
11817: # p2, p3: f/grnd, b/grnd colour
11818: # (see ESC F for colours)
11819: # use ZZ for mono, eg.
11820: # ESC [ 0 Z Z for normal
11821: # ESC [ 4 Z Z for inverse etc.
11822: #
11823: #ESC \ n set page size:
11824: # n = 1 24 lines/page
11825: # n = 2 48 lines/page
11826: # n = 3 72 lines/page
11827: # n = 4 96 lines/page
11828: #ESC ] n set Wordstar mode:
11829: # n = 0 normal (KDS7372) mode
11830: # n = 1 Wordstar mode
11831: #
11832: #ESC b set foreground colour screen
11833: #
11834: #ESC c n enter self-test mode:
11835: # n = 0 exit self test mode
11836: # n = 1 ROM test
11837: # n = 2 RAM test
11838: # n = 3 NVRAM test
11839: # n = 4 screen display test
11840: # n = 5 main/printer port test
11841: # n = 6 mouse port test
11842: # n = 7 graphics board test
11843: # n = 8 graphics memory test
11844: # n = 9 display all 'E'
11845: # n = : display all 'H'
11846: #ESC d set background colour screen
11847: #
11848: #ESC e n program insert char (n = insert char)
11849: #ESC f text CR load user status line with 'text'
11850: #
11851: #ESC g display user status line on 25th line
11852: #ESC h display system status line on 25th line
11853: #ESC i tab
11854: #ESC j reverse linefeed
11855: #ESC k n duplex/local edit mode:
11856: # n = 0 duplex edit mode
11857: # n = 1 local edit mode
11858: #ESC l n select virtual screen:
11859: # n = 0 screen 1
11860: # n = 1 screen 2
11861: #ESC m save current config to NVRAM
11862: #ESC n p1 select display screen:
11863: # p1 = 0 screen 1
11864: # p1 = 1 screen 2
11865: # p1 = 2 screen 3
11866: # p1 = 3 screen 4
11867: #ESC o p1 p2 set characters/line and attribute:
11868: # p1 = 0 80 chars/line
11869: #
11870: #ESC o p1 p2 set characters/line and attribute:
11871: # p1 = 0 80 chars/line
11872: # p1 = 1 132 chars/line
11873: # p2 = 0 single width single height
11874: # p2 = 1 single width double height
11875: # p2 = 2 double width single height
11876: # p2 = 3 double width double height
11877: #
11878: #ESC q insert mode on
11879: #ESC r edit mode on
11880: #ESC s send message all
11881: #ESC t erase line to null
11882: #ESC u clear monitor mode (see ESC U, ESC X)
11883: #ESC v autopage mode on
11884: #ESC w autopage mode off
11885: #ESC x p1 p2 p3 define delimiter code...
11886: #ESC y erase page to null
11887: #
11888: #ESC z 2 p1 p2 p3 p4 draw quadrangle:
11889: # p1 = starting row
11890: # p2 = starting column
11891: # p3 = end row
11892: # p4 = end column
11893: #
11894: #ESC { p1 p2 p3 p4 configure main port
11895: # (baud, stop bits, parity, word length)
11896: #
11897: #ESC | p1 p2 text Ctrl-Y program function key with 'text':
11898: # p1 = function key code:
11899: # '1' - ';' normal f1- f11
11900: # '<' - 'F' shifted f1 - f11
11901: # p2 = program mode:
11902: # 1 = FDX
11903: # 2 = LOC
11904: # 3 = HDX
11905: # Ctrl-Y = terminator
11906: # (use Ctrl-P to escape ^P, ^Y )
11907: #
11908: #ESC } p1 p2 p3 p4 configure printer port
11909: # (baud, stop bits, parity, word length)
11910: #ESC ~ send system status
11911: #
11912: # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
11913: #
11914: # Entry is by esr going solely on above information and is UNTESTED.
11915: # This actually looks a lot like a Televideo 9xx.
11916: # This entry uses page 0 and is monochrome; I'm not brave enough to try
11917: # to make color work without a test terminal. The <am> capability is a guess.
11918: # The initialization string sets conversation mode, blinking underline cursor,
11919: # full duplex, parallel attribute mode, display user status line, white
11920: # foreground, black background, normal highlight.
11921: #
1.11 millert 11922: icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
11923: OTbs, am, hs,
11924: cols#80, lines#24,
11925: bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
11926: cnorm=\E.3, cr=^M,
11927: csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
11928: cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
11929: cuu1=^K, cvvis=\E.1, dch=\EW, dl1=\ER, home=^^, ht=^I, hts=\E1,
11930: il1=\EE, invis=\E[1ZZ, is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ,
11931: nel=^_, rev=\E[4ZZ, rmir=\Er,
11932: rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
11933: rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
11934: sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
11935: sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
11936: icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
11937: rs2=\Eo1,
11938: use=icl6404,
1.1 millert 11939:
11940: #### Interactive Systems Corp
11941: #
11942: # ISC used to sell OEMed and customized hardware to support ISC UNIX.
11943: # ISC UNIX still exists in 1995, but ISC itself is no more; they got
11944: # bought out by Sun.
11945: #
11946:
11947: # From: <cithep!eric> Wed Sep 16 08:06:44 1981
11948: # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
11949: # ":le=^_:" later overridden -- esr)
11950: intext|Interactive Systems Corporation modified owl 1200,
1.11 millert 11951: OTbs, am,
1.1 millert 11952: cols#80, it#8, lines#24, xmc#1,
1.11 millert 11953: bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
11954: cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
11955: dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
11956: el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
11957: kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
11958: kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
11959: kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
11960: rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%,
11961: smso=^V$\,,
1.1 millert 11962: intext2|intextii|INTERACTIVE modified owl 1251,
11963: am, bw, ul,
11964: cols#80, lines#24, xmc#0,
1.11 millert 11965: bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
11966: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
11967: dl1=\E[M, ed=\E[J, el=\E[K,
1.1 millert 11968: flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
1.11 millert 11969: hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
11970: kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
11971: kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
11972: kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
11973: khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
11974: lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
11975: lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
11976: smul=\E[18 D,
1.1 millert 11977:
11978: #### Kimtron (abm, kt)
11979: #
11980: # Kimtron seems to be history, but as March 1998 these people are still
11981: # offering repair services for Kimtron equipment:
11982: #
11983: # Com/Pair Monitor Service
11984: # 1105 N. Cliff Ave.
11985: # Sioux Falls, South Dakota 57103
11986: #
11987: # WATS voice: 1-800/398-4946
11988: # POTS fax: +1 605/338-8709
11989: # POTS voice: +1 605/338-9650
11990: # Email: <compair@sd.cybernex.net>
11991: # Internet/Web: <http://www.com-pair.com>
11992: #
11993: # Kimtron entries include (undocumented) codes for: enter dim mode,
11994: # enter bold mode, enter reverse mode, turn off all attributes.
11995: #
11996:
11997: # Kimtron ABM 85 added by Dual Systems
11998: # (abm85: removed duplicated ":kd=^J:" -- esr)
11999: abm85|Kimtron ABM 85,
1.11 millert 12000: OTbs, am, bw, msgr,
1.1 millert 12001: cols#80, it#8, lines#24, xmc#1,
12002: cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
12003: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 12004: dl1=\ER, ed=\Ey, el=\Et, ht=^I,
1.1 millert 12005: if=/usr/share/tabset/stdcrt, il1=\EE,
1.11 millert 12006: is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
12007: kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
12008: rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
1.1 millert 12009: # Kimtron ABM 85H added by Dual Systems.
12010: # Some notes about the abm85h entries:
12011: # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
12012: # firmware revs prior to SP51
12013: # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
12014: # abm85e entry if it is in tvi920 emulation mode. They are incompatible
12015: # in some places and NOT software settable i.e., <is2> can't fix it)
12016: # 3) In 85h mode, the arrow keys and special functions transmit when
12017: # the terminal is in dup-edit, and work only locally in local-edit.
12018: # Vi won't swallow `del char' for instance, but <smcup> turns on
12019: # dup-edit anyway so that the arrow keys will work right. If the
12020: # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
12021: # <is2>. Note that 920E mode does not have software commands to toggle
12022: # between dup and local edit, so you get whatever was set last on the
12023: # terminal.
12024: # 4) <flash> attribute is nice, but seems too slow to work correctly
12025: # (\Eb<pad>\Ed)
12026: # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
12027: # are selected, the <xmc@> entry should be removed.
12028: # 6) auto new-line should be on (selectable from setup mode only)
12029: #
12030: # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
12031: abm85h|Kimtron ABM 85H native mode,
1.11 millert 12032: hs,
12033: xmc@,
12034: bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
12035: fsl=^M, invis@,
1.1 millert 12036: is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
1.11 millert 12037: kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef,
12038: use=adm+sgr, use=abm85,
1.1 millert 12039: abm85e|Kimtron ABM 85H in 920E mode,
12040: xmc@,
12041: bel=^G, dim=\E), flash@,
12042: is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
1.11 millert 12043: rev=\Ej, sgr0=\E(\Ek, smir=\EZ,
12044: use=abm85,
1.1 millert 12045: abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
12046: xmc@,
1.11 millert 12047: bel=^G, dim=\E),
1.1 millert 12048: is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
1.11 millert 12049: rev=\Ej, sgr0=\E(\Ek, smir=\EZ,
12050: use=abm85,
1.1 millert 12051: # From: <malman@bbn-vax.arpa>
12052: # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
12053: kt7|kimtron model kt-7,
1.11 millert 12054: OTbs, am,
1.1 millert 12055: cols#80, it#8, lines#24,
12056: cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
12057: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 12058: dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
12059: if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
12060: kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
12061: kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
12062: kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
12063: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
12064: kich1=\EQ, kil1=\EE, tsl=\Ef,
12065: use=adm+sgr,
1.1 millert 12066: # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
12067: # other kt7 entry and the adjacent key capabilities). Removed EE which is
12068: # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
12069: # but we can't figure out what.
12070: kt7ix|kimtron model kt-7 or 70 in IX mode,
12071: am, bw,
12072: cols#80, it#8, lines#25,
1.11 millert 12073: acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
1.1 millert 12074: civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
12075: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12076: dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
12077: home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
12078: is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
12079: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
12080: ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
12081: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
12082: kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
12083: nel=^M^J, pulse=\EK, rmacs=\E%, rmir=, rmso=\EG0, rmul=\EG0,
12084: sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
12085:
12086: #### Microdata/MDIS
12087: #
12088: # This was a line of terminals made by McDonnell-Douglas Information Systems.
12089: # These entries come direct from MDIS documentation. I have edited them only
12090: # to move primary names of the form p[0-9] * to aliases, and to comment out
12091: # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
12092: # also removed the change history; the last version indicates this is
12093: # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
12094: #
12095:
12096: # McDonnell Information Systems Terminal Family History
12097: # =========================================
12098: #
12099: # Prism-1, Prism-2 and P99:
12100: # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
12101: #
12102: # Prism-4 and Prism-5:
12103: # Slightly less ancient range of Microdata terminals. Follow-on from
12104: # Prism-2, but with many enhancements. P5 has eight display pages.
12105: #
12106: # Prism-6:
12107: # A special terminal for use with library systems, primarily in Germany.
12108: # Limited numbers. Similar functionality to P5 (except attributes?).
12109: #
12110: # Prism-7, Prism-8 and Prism-9:
12111: # More recent range of MDIS terminals, in which P7 and P8
12112: # replace the P4 & P5, with added functionality, and P9 is the flagship.
12113: # The P9 has two emulation modes - P8 and ANSI - and includes a
12114: # large number of the DEC VT220 control sequences. Both
12115: # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
12116: #
12117: # Prism-12 and Prism-14:
12118: # Latest range, functionally very similar to the P9. The P14 has a
12119: # black-on-white overscanning screen.
12120: #
12121: # The terminfo definitions given here are:
12122: #
12123: # p2 - Prism-2 (or Prism-1 or P99).
12124: #
12125: # p4 - Prism-4 (and older P7s & P8s).
12126: # p5 - Prism-5 (or Prism-6).
12127: #
12128: # p7 - Prism-7.
12129: # p8 - Prism-8 (in national or multinational mode).
12130: # p8-w - 132 column version of p8.
12131: # p9 - Prism-9 in ANSI mode.
12132: # p9-w - 132 column version of p9.
12133: # p9-8 - Prism-9 in Prism-8 emulation mode.
12134: # p9-8-w - As p9-8, but with 132 columns.
12135: #
12136: # p12 - Prism-12 in ANSI mode.
12137: # p12-w - 132 column version of p12.
12138: # p12-m - Prism-12 in MDC emulation mode.
12139: # p12-m-w - As p12-m, but with 132 columns.
12140: # p14 - Prism-14 in ANSI mode.
12141: # p14-w - 132 column version of p14.
12142: # p14-m - Prism-14 in MDC emulation mode.
12143: # p14-m-w - As p14-m, but with 132 columns.
12144: #
12145: # p2: Prism-2
12146: # -----------
12147: #
12148: # Includes Prism-1 and basic P99 without SP or MP loaded.
12149: # The simplest form of Prism-type terminal.
12150: # Basic cursor movement and clearing operations only.
12151: # No video attributes.
12152: # Notes:
12153: # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
12154: # value up, followed by backspace.
12155: #
1.11 millert 12156: prism2|MDC Prism-2,
12157: am, bw, msgr,
12158: cols#80, lines#24,
12159: bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
12160: cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
12161: cuu1=^Z, ed=\EJ, el=\EK, home=^A,
12162: hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
12163: ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
1.1 millert 12164:
12165: # p4: Prism-4
12166: # -----------
12167: #
12168: # Includes early versions of P7 & P8.
12169: # Basic family definition for most Prisms (except P2 and P9 ANSI).
12170: # Notes:
12171: # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
12172: # value up, followed by backspace.
12173: # Cursor key definitions removed because they interfere with vi and csh keys.
12174: #
1.11 millert 12175: prism4|p4|P4|MDC Prism-4,
12176: am, bw, hs, mc5i, msgr,
12177: cols#80, lines#24, wsl#72, xmc#1,
12178: bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
12179: cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
12180: cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
12181: cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
12182: fsl=^]\345, home=^A,
12183: hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
12184: ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
12185: rev=^CD, rmso=^C\s, rmul=^C\s,
12186: sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
12187: sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
12188: vpa=\013%p1%{32}%+%c,
1.1 millert 12189:
12190: # p5: Prism-5
12191: # -----------
12192: #
12193: # Same definition as p4. Includes Prism-6 (not tested!).
12194: # Does not use any multi-page features.
12195: #
1.11 millert 12196: prism5|p5|P5|MDC Prism-5,
12197: use=p4,
1.1 millert 12198:
12199: # p7: Prism-7
12200: # -----------
12201: #
12202: # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
12203: # Notes:
12204: # Use p4 for very early models of P7.
12205: # Rev-index removed; can't send nulls to terminal in 8-bit modes.
12206: #
1.11 millert 12207: prism7|p7|P7|MDC Prism-7,
12208: cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
1.1 millert 12209:
12210: # p8: Prism-8
12211: # -----------
12212: #
12213: # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
12214: # Supports national and multinational character sets.
12215: # Notes:
12216: # Alternate char set operations only work in multinational mode.
12217: # Use p4 for very early models of P8.
12218: # Rev-index removed; can't send nulls to terminal in 8-bit modes.
12219: # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
12220: #
1.11 millert 12221: prism8|p8|P8|MDC Prism-8,
12222: cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
12223: vpa=\E[%i%p1%dd,
12224: use=p4,
1.1 millert 12225:
12226: # p8-w: Prism-8 in 132 column mode
12227: # --------------------------------
12228: #
12229: # 'Wide' version of p8.
12230: # Notes:
12231: # Rev-index removed; can't send nulls to terminal in 8-bit modes.
12232: #
1.11 millert 12233: prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
12234: cols#132,
12235: is2=\E[<12h\E[<14h, use=p8,
1.1 millert 12236:
12237: # p9: Prism-9 in ANSI mode
12238: # -------------------------
12239: #
12240: # The "flagship" model of this generation of terminals.
12241: # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
12242: # Notes:
12243: # Tabs only reset by "reset". Otherwise assumes default (8 cols).
12244: # Fixes to deal with terminal firmware bugs:
12245: # . 'ri' uses insert-line since rev index doesn't always
12246: # . 'sgr0' has extra '0' since esc[m fails
12247: # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
12248: # Not covered in the current definition:
12249: # . Labels
12250: # . Programming Fn keys
12251: # . Graphic characters (defaults correctly to vt100)
12252: # . Padding values (sets xon)
12253: # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
12254: #
1.11 millert 12255: prism9|p9|P9|MDC Prism-9 in ANSII mode,
12256: am, bw, hs, mc5i, msgr, xenl, xon,
12257: cols#80, it#8, lines#24, vt#3, wsl#72,
12258: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
12259: clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
12260: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
12261: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12262: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
12263: dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
12264: ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
12265: ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
12266: is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
12267: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
12268: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
12269: kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
12270: kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
12271: kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
12272: khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
12273: prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
12274: ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
12275: rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
12276: sc=\E[%y,
12277: sgr=\E[%{0}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{2}%+%;%?%p4%t%{1}%+%;%?%p6%t%{8}%+%;%?%p8%t%{32}%+%;%d%%{%?%p9%t\016%e\017%;,
12278: sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
12279: tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
1.1 millert 12280:
12281: # p9-w: Prism-9 in 132 column mode
12282: # --------------------------------
12283: #
12284: # 'Wide' version of p9.
12285: #
1.11 millert 12286: prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
12287: cols#132,
12288: is2=\E[&p\E[<12l\E F\E[<14h,
12289: rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
1.1 millert 12290:
12291: # p9-8: Prism-9 in P8 mode
12292: # ------------------------
12293: #
12294: # P9 terminal in P8 emulation mode.
12295: # Similar to p8 definition.
12296: # Insertion and deletion operations possible.
12297: #
1.11 millert 12298: prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
12299: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12300: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
1.1 millert 12301:
12302: # p9-8-w: Prism-9 in P8 and 132 column modes
12303: # ------------------------------------------
12304: #
12305: # P9 terminal in P8 emulation mode and 132 column mode.
12306: #
1.11 millert 12307: prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
12308: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12309: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
1.1 millert 12310:
12311: # p12: Prism-12 in ANSI mode
12312: # ---------------------------
12313: #
12314: # See p9 definition.
12315: #
1.11 millert 12316: prism12|p12|P12|MDC Prism-12 in ANSI mode,
12317: use=p9,
1.1 millert 12318:
12319: # p12-w: Prism-12 in 132 column mode
12320: # ----------------------------------
12321: #
12322: # 'Wide' version of p12.
12323: #
1.11 millert 12324: prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
12325: use=p9-w,
1.1 millert 12326:
12327: # p12-m: Prism-12 in MDC emulation mode
12328: # -------------------------------------
12329: #
12330: # P12 terminal in MDC emulation mode.
12331: # Similar to p8 definition.
12332: # Insertion and deletion operations possible.
12333: #
1.11 millert 12334: prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
12335: use=p9-8,
1.1 millert 12336:
12337: # p12-m-w: Prism-12 in MDC emulation and 132 column modes
12338: # -------------------------------------------------------
12339: #
12340: # P12 terminal in MDC emulation mode and 132 column mode.
12341: #
1.11 millert 12342: prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
12343: use=p9-8-w,
1.1 millert 12344:
12345: # p14: Prism-14 in ANSII mode
12346: # ---------------------------
12347: #
12348: # See p9 definition.
12349: #
1.11 millert 12350: prism14|p14|P14|MDC Prism-14 in ANSII mode,
12351: use=p9,
1.1 millert 12352:
12353: # p14-w: Prism-14 in 132 column mode
12354: # ----------------------------------
12355: #
12356: # 'Wide' version of p14.
12357: #
1.11 millert 12358: prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
12359: use=p9-w,
1.1 millert 12360:
12361: # p14-m: Prism-14 in MDC emulation mode
12362: # -------------------------------------
12363: #
12364: # P14 terminal in MDC emulation mode.
12365: # Similar to p8 definition.
12366: # Insertion and deletion operations possible.
12367: #
1.11 millert 12368: prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
12369: use=p9-8,
1.1 millert 12370:
12371: # p14-m-w: Prism-14 in MDC emulation and 132 column modes
12372: # -------------------------------------------------------
12373: #
12374: # P14 terminal in MDC emulation mode and 132 column mode.
12375: #
1.11 millert 12376: prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
12377: use=p9-8-w,
1.1 millert 12378:
12379: # End of McDonnell Information Systems Prism definitions
12380:
12381: # These things were popular in the Pick database community at one time
12382: # From: George Land <georgeland@aol.com> 24 Sep 1996
1.11 millert 12383: p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
12384: am, bw, hs, mir,
12385: cols#80, lines#24, ma#1, wsl#78, xmc#1,
12386: bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
12387: cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
12388: ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
12389: kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
12390: kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
12391: kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
12392: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
12393: kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
12394: lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
12395: pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
12396: smul=^C0,
1.1 millert 12397:
12398: #### Microterm (act, mime)
12399: #
12400: # The mime1 entries refer to the Microterm Mime I or Mime II.
12401: # The default mime is assumed to be in enhanced act iv mode.
12402: #
12403:
12404: # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
12405: # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
12406: # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
12407: # since Sytek insists ^S means xoff.
12408: # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
12409: act4|microterm|microterm act iv,
1.11 millert 12410: OTbs, am,
1.1 millert 12411: cols#80, lines#24,
1.11 millert 12412: bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
12413: cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
12414: cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
12415: ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
12416: il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
12417: kcuu1=^Z,
1.1 millert 12418: # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
12419: # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
12420: # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
12421: act5|microterm5|microterm act v,
1.11 millert 12422: kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA, use=act4,
1.1 millert 12423: # Mimes using brightness for standout. Half bright is really dim unless
12424: # you turn up the brightness so far that lines show up on the screen.
12425: mime-fb|full bright mime1,
1.11 millert 12426: is2=^S\E, rmso=^S, smso=^Y, use=mime,
1.1 millert 12427: mime-hb|half bright mime1,
1.11 millert 12428: is2=^Y\E, rmso=^Y, smso=^S, use=mime,
1.1 millert 12429: # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
12430: # the more plausible ":do=^J:" -- esr)
12431: # uc was at one time disabled to get around a curses bug, be wary of it
12432: mime|mime1|mime2|mimei|mimeii|microterm mime1,
1.11 millert 12433: OTbs, am,
1.1 millert 12434: cols#80, it#8, lines#24, vt#9,
12435: bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
1.11 millert 12436: cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
12437: cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
12438: il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
12439: kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
1.1 millert 12440: # These termcaps (for mime2a) put the terminal in low intensity mode
12441: # since high intensity mode is so obnoxious.
12442: mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
1.11 millert 12443: OTbs, am,
1.1 millert 12444: cols#80, lines#24,
12445: bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
1.11 millert 12446: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
12447: dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
1.1 millert 12448: il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
1.11 millert 12449: kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
12450: smir=\EE, smso=\E\:, smul=\E6,
1.1 millert 12451: # This is the preferred mode (but ^X can't be used as a kill character)
12452: mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
1.11 millert 12453: OTbs,
12454: cols#80, it#8, lines#24,
1.1 millert 12455: bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12456: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
12457: dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
1.11 millert 12458: il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
12459: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
1.1 millert 12460: rmul=\E5, smir=^O, smso=\E8, smul=\E4,
12461: # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
12462: mime3a|mime1 emulating 3a,
1.11 millert 12463: am@,
12464: kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
1.1 millert 12465: mime3ax|mime-3ax|mime1 emulating enhanced 3a,
1.11 millert 12466: it#8,
12467: dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>, use=mime3a,
1.1 millert 12468: # Wed Mar 9 18:53:21 1983
12469: # We run our terminals at 2400 baud, so there might be some timing problems at
12470: # higher speeds. The major improvements in this model are the terminal now
12471: # scrolls down and insert mode works without redrawing the rest of the line
12472: # to the right of the cursor. This is done with a bit of a kludge using the
12473: # exit graphics mode to get out of insert, but it does not appear to hurt
12474: # anything when using vi at least. If you have some users using act4s with
12475: # programs that use curses and graphics mode this could be a problem.
1.11 millert 12476: mime314|mm314|mime 314,
12477: am,
12478: cols#80, lines#24,
12479: clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
12480: dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
12481: kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
1.1 millert 12482: # Microterm mime 340 from University of Wisconsin
12483: mm340|mime340|mime 340,
12484: cols#80, lines#24,
12485: clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
12486: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12487: dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
1.11 millert 12488: el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
12489: kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
1.1 millert 12490: # This came from University of Wisconsin marked "astro termcap for jooss".
12491: # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
12492: # also added <rmam>/<smam> based on the init string -- esr)
12493: mt4520-rv|micro-term 4520 reverse video,
12494: am, hs, msgr, xenl, xon,
12495: cols#80, it#8, lines#24, wsl#80,
12496: bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
12497: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12498: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12499: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.11 millert 12500: cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12501: dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
12502: fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1.1 millert 12503: ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12504: is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
1.11 millert 12505: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12506: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
12507: ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
12508: ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
1.1 millert 12509: rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
1.11 millert 12510: sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
12511: tbc=\E[g, tsl=\E[25;1H,
1.1 millert 12512:
12513: # Fri Aug 5 08:11:57 1983
12514: # This entry works for the ergo 4000 with the following setups:
12515: # ansi,wraparound,newline disabled, xon/xoff disabled in both
12516: # setup a & c.
12517: #
12518: # WARNING!!! There are multiple versions of ERGO 4000 microcode
12519: # Be advised that very early versions DO NOT WORK RIGHT !!
12520: # Microterm does have a ROM exchange program- use it or lose big
12521: # (ergo400: added <rmam>/<smam> based on the init string -- esr)
1.11 millert 12522: ergo4000|microterm ergo 4000,
12523: da, db, msgr,
12524: cols#80, lines#66,
12525: bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
12526: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12527: dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
12528: el=\E[0K$<13>, ht=^I, il=\E[1L$<5*>, ind=\ED$<20*>,
12529: is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
12530: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
12531: kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
12532: lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
12533: rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
12534: smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
12535: smso=\E[7m$<20>,
1.1 millert 12536:
12537: #### NCR
12538: #
12539: # NCR's terminal group was merged with AT&T's when AT&T bought the company.
12540: # For what happened to that group, see the ADDS section.
12541: #
12542: # There is an NCR4103 terminal that's just a re-badged Wyse-50.
12543: #
12544:
12545: # The following vendor-supplied termcaps were captured from the Boundless
12546: # Technologies site, 8 March 1998. I removed all-upper-case names that were
12547: # identical, except for case, to lower-case ones. I also uncommented the acsc
12548: # capabilities.X
12549: #
1.14 millert 12550: # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
1.1 millert 12551: # DEC vt200/300 with color capabilities added.
1.11 millert 12552: ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
12553: colors#8, pairs#64,
12554: op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300an,
1.14 millert 12555: # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
1.1 millert 12556: # DEC vt200/300 with color capabilities added.
1.11 millert 12557: ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
12558: colors#8, pairs#64,
12559: op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300wan,
1.14 millert 12560: # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
12561: # DEC vt200/300 with color capabilities added.
1.11 millert 12562: ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
12563: colors#8, pairs#64,
12564: op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300pp,
1.1 millert 12565: # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
12566: # DEC vt200/300 with color capabilities added.
1.11 millert 12567: ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
12568: colors#8, pairs#64,
12569: op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300wpp,
1.1 millert 12570: # This definition for ViewPoint supports several attributes. This means
12571: # that it has magic cookies (extra spaces where the attributes begin).
12572: # Some applications do not function well with magic cookies. The System
12573: # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
12574: # If supporting various attributes is not vital, 'xmc#1' and the extra
12575: # attributes can be removed.
12576: # Mapping to ASCII character set ('acsc' capability) can also be
12577: # restored if needed.
1.11 millert 12578: ncr260vppp|NCR 2900_260 viewpoint,
12579: am, bw, hs, km, mc5i, mir, msgr, xon,
12580: cols#80, lines#24, nlab#32, xmc#1,
12581: acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
12582: cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
12583: cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
12584: cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
12585: cvvis=\E`5, dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c,
12586: ed=\Ek$<2>, el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I,
12587: hts=\E1, il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
12588: is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
12589: kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
12590: kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
12591: kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
12592: kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
12593: kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
12594: kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
12595: kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
12596: kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
12597: kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
12598: kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
12599: kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
12600: mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
12601: nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
12602: rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
12603: rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
12604: sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
12605: smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
12606: ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
1.1 millert 12607: cols#132,
1.11 millert 12608: cup=\Ea%i%p1%dR%p2%dC$<30>,
12609: is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
12610: rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
12611: use=ncr260vppp,
12612: ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
12613: am, hs, mir, msgr, xenl, xon,
12614: cols#80, lines#24, nlab#32,
12615: acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12616: blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12617: clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
12618: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
12619: cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
1.1 millert 12620: cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
1.11 millert 12621: cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
12622: cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
12623: dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
12624: ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
12625: fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
12626: hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
12627: il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
12628: invis=\E[8m,
12629: is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12630: ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs,
12631: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12632: kdch1=\E[3~, kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12633: kf4=\EOS, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~,
12634: kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>, rc=\E8,
12635: rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
12636: rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
12637: rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12638: sc=\E7,
12639: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
12640: sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
12641: smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
12642: tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
1.1 millert 12643: ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
12644: cols#132,
1.11 millert 12645: cup=\E[%i%p1%d;%p2%dH$<30>,
12646: is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12647: rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12648: use=ncr260vt100an,
12649: ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
12650: is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12651: ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
12652: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
12653: kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
12654: lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
12655: rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12656: smkx=\E=,
12657: use=ncr260vt100an,
1.1 millert 12658: ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
12659: cols#132,
1.11 millert 12660: cup=\E[%i%p1%d;%p2%dH$<30>,
12661: is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12662: rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12663: use=ncr260vt100pp,
12664: ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
12665: am, hs, mir, msgr, xenl, xon,
12666: cols#80, lines#24, nlab#32,
12667: acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12668: blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12669: clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
12670: csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
12671: cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
12672: cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
12673: cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
12674: cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
12675: dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
12676: ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
12677: fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
12678: ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
12679: ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
12680: is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12681: ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs,
12682: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12683: kdch1=\E[3~, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\E[21~,
12684: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
12685: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
12686: kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf21=\E[31~,
12687: kf22=\E[32~, kf23=\E[33~, kf24=\E[34~, kf25=\E[35~,
12688: kf26=\E[1~, kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR,
12689: kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
12690: kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
12691: kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
12692: kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
12693: mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
12694: ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
12695: rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
12696: rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12697: sc=\E7,
12698: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
12699: sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
12700: smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
12701: tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
1.1 millert 12702: ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
1.11 millert 12703: cols#132,
12704: cup=\E[%i%p1%d;%p2%dH$<30>,
12705: is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
12706: rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
12707: use=ncr260vt200an,
12708: ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
12709: ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
12710: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
12711: kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
12712: lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
12713: use=ncr260vt200an,
1.1 millert 12714: ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
1.11 millert 12715: cols#132,
12716: cup=\E[%i%p1%d;%p2%dH$<30>,
12717: is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12718: rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12719: use=ncr260vt200pp,
12720: ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
12721: am, hs, mir, msgr, xenl, xon,
12722: cols#80, lines#24, nlab#32,
12723: acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12724: blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12725: clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
12726: csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
12727: cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
12728: cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
12729: cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
12730: cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
12731: dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
12732: ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
12733: fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
12734: ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
12735: ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
12736: is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12737: ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs,
12738: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12739: kdch1=\E[3~, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\E[21~,
12740: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
12741: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
12742: kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf21=\E[31~,
12743: kf22=\E[32~, kf23=\E[33~, kf24=\E[34~, kf25=\E[35~,
12744: kf26=\E[1~, kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR,
12745: kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
12746: kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
12747: kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
12748: kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
12749: mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
12750: ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
12751: rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
12752: rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12753: sc=\E7,
12754: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
12755: sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
12756: smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
12757: tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
12758: ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
12759: cols#132,
12760: cup=\E[%i%p1%d;%p2%dH$<30>,
12761: is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
12762: rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
12763: use=ncr260vt300an,
12764: ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
12765: ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
12766: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
12767: kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
12768: lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
12769: use=ncr260vt300an,
1.1 millert 12770: NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
1.11 millert 12771: cols#132,
12772: cup=\E[%i%p1%d;%p2%dH$<30>,
12773: is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12774: rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12775: use=ncr260vt300pp,
1.1 millert 12776: # This terminfo file contains color capabilities for the Wyse325 emulation of
12777: # the NCR 2900/260C color terminal. Because of the structure of the command
12778: # (escape sequence) used to set color attributes, one of the fore/background
12779: # colors must be preset to a given value. I have set the background color to
12780: # black. The user can change this setup by altering the last section of the
12781: # 'setf' definition. The escape sequence to set color attributes is
12782: # ESC d y <foreground_color> <background_color> 1
12783: # In addition, the background color can be changed through the desk accessories.
12784: # The capablitiy 'op' sets colors to green on black (default combination).
12785: #
12786: # NOTE: The NCR Unix System Administrator's Shell will not function properly
12787: # if the 'pairs' capability is defined. Un-Comment the 'pairs'
12788: # capability and recompile if you wish to have it included.
12789: #
1.11 millert 12790: ncr260wy325pp|NCR 2900_260 wyse 325,
12791: am, bw, hs, km, mc5i, mir, msgr, xon,
12792: colors#16, cols#80, lines#24, ncv#33, nlab#32,
12793: acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
12794: cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
12795: cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
12796: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
12797: cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
12798: ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
12799: hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
12800: is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12801: kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
12802: kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
12803: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
12804: kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
12805: kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
12806: kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
12807: kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
12808: kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
12809: kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
12810: kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
12811: kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
12812: mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
12813: nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
12814: rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
12815: rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12816: setb=\s,
12817: setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
12818: sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
12819: smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
12820: tsl=\EF,
12821: ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
12822: cols#132,
12823: cup=\Ea%i%p1%dR%p2%dC$<30>,
12824: is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12825: rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12826: use=ncr260wy325pp,
1.1 millert 12827: # This definition for Wyse 350 supports several attributes. This means
12828: # that it has magic cookies (extra spaces where the attributes begin).
12829: # Some applications do not function well with magic cookies. The System
12830: # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
12831: # If supporting various attributes is not vital, 'xmc#1' and the extra
12832: # attributes can be removed.
12833: # Mapping to ASCII character set ('acsc' capability) can also be
12834: # restored if needed.
12835: # In addition, color capabilities have been added to this file. The drawback,
12836: # however, is that the background color has to be black. The foreground colors
12837: # are numbered 0 through 15.
12838: #
12839: # NOTE: The NCR Unix System Administrator's Shell does not function properly
12840: # with the 'pairs' capability defined as below. If you wish to
12841: # have it included, Un-comment it and recompile (using 'tic').
12842: #
1.11 millert 12843: ncr260wy350pp|NCR 2900_260 wyse 350,
12844: am, bw, hs, km, mc5i, mir, msgr, xon,
12845: colors#16, cols#80, lines#24, ncv#33, nlab#32, xmc#1,
12846: acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
12847: cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
12848: cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
12849: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
12850: cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
12851: ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
12852: hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
12853: is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12854: kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
12855: kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
12856: kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
12857: kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
12858: kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
12859: kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
12860: kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
12861: kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
12862: kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
12863: khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
12864: mc0=\EP$<10>, mc4=^T, mc5=^R,
12865: mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
12866: nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
12867: rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
12868: rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12869: setb=\s,
12870: setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
12871: sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
12872: smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
12873: tsl=\EF,
12874: ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
12875: cols#132,
12876: cup=\Ea%i%p1%dR%p2%dC$<30>,
12877: is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
12878: rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
12879: use=ncr260wy350pp,
1.1 millert 12880: # This definition for Wyse 50+ supports several attributes. This means
12881: # that it has magic cookies (extra spaces where the attributes begin).
12882: # Some applications do not function well with magic cookies. The System
12883: # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
12884: # If supporting various attributes is not vital, 'xmc#1' and the extra
12885: # attributes can be removed.
12886: # Mapping to ASCII character set ('acsc' capability) can also be
12887: # restored if needed.
12888: # (ncr260wy50+pp: originally contained commented-out
12889: # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
1.11 millert 12890: ncr260wy50+pp|NCR 2900_260 wyse 50+,
12891: am, bw, hs, km, mc5i, mir, msgr, xon,
12892: cols#80, lines#24, nlab#32, xmc#1,
12893: acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
12894: cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
12895: cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
12896: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
12897: cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
12898: ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
12899: ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
12900: invis=\EG1,
12901: is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12902: kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
12903: kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
12904: kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
12905: kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
12906: kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
12907: kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
12908: kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
12909: kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
12910: kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
12911: khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
12912: mc0=\EP$<10>, mc4=^T, mc5=^R,
12913: mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
12914: nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
12915: rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
12916: rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12917: sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
12918: smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
12919: ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
12920: cols#132,
12921: cup=\Ea%i%p1%dR%p2%dC$<30>,
12922: is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
12923: rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
12924: use=ncr260wy50+pp,
12925: ncr260wy60pp|NCR 2900_260 wyse 60,
12926: am, bw, hs, km, mc5i, mir, msgr, xon,
1.1 millert 12927: cols#80, lines#24, nlab#32,
1.11 millert 12928: acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
12929: cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
12930: cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
12931: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
12932: cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
12933: ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
12934: ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
12935: invis=\EG1,
12936: is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12937: kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
12938: kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
12939: kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
12940: kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12941: kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12942: kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
12943: kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
12944: kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
12945: kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
12946: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
12947: kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
12948: mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
12949: nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
12950: rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
12951: rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12952: sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
12953: smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
12954: tsl=\EF,
12955: ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
12956: cols#132,
12957: cup=\Ea%i%p1%dR%p2%dC$<30>,
12958: is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12959: rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12960: use=ncr260wy60pp,
12961: ncr160vppp|NCR 2900_160 viewpoint,
12962: use=ncr260vppp,
12963: ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
12964: use=ncr260vpwpp,
12965: ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
12966: use=ncr260vt100an,
12967: ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
12968: use=ncr260vt100pp,
1.1 millert 12969: ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
1.11 millert 12970: use=ncr260vt100wan,
1.1 millert 12971: ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
1.11 millert 12972: use=ncr260vt100wpp,
12973: ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
12974: use=ncr260vt200an,
12975: ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
12976: use=ncr260vt200pp,
1.1 millert 12977: ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
1.11 millert 12978: use=ncr260vt200wan,
1.1 millert 12979: ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
1.11 millert 12980: use=ncr260vt200wpp,
12981: ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
12982: use=ncr260vt300an,
12983: ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
12984: use=ncr260vt300pp,
1.1 millert 12985: ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
1.11 millert 12986: use=ncr260vt300wan,
1.1 millert 12987: ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
1.11 millert 12988: use=ncr260vt300wpp,
12989: ncr160wy50+pp|NCR 2900_160 wyse 50+,
12990: use=ncr260wy50+pp,
12991: ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
12992: use=ncr260wy50+wpp,
12993: ncr160wy60pp|NCR 2900_160 wyse 60,
12994: use=ncr260wy60pp,
12995: ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
12996: use=ncr260wy60wpp,
1.1 millert 12997: ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
1.11 millert 12998: am, hs, mc5i, mir, msgr, xon,
12999: cols#80, it#8, lines#24, nlab#32,
13000: acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
13001: bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
13002: clear=\E[2J\E[1;1H$<300>, cr=^M,
13003: csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
13004: cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
13005: cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
13006: cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
13007: cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
13008: dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
13009: ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
13010: enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
13011: ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
13012: ind=\ED,
13013: is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
13014: kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
13015: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
13016: kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
13017: rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
13018: rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
13019: rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
13020: sc=\E7,
13021: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
13022: sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
13023: smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
13024: tsl=\E[>+1$<70>,
13025: ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
13026: cols#132,
13027: is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
13028: rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
13029: use=ncrvt100an,
1.1 millert 13030: #
13031: # Vendor-supplied NCR termcaps end here
13032:
13033: # NCR7900 DIP switches:
13034: #
13035: # Switch A:
13036: # 1-4 - Baud Rate
13037: # 5 - Parity (Odd/Even)
13038: # 6 - Don't Send or Do Send Spaces
13039: # 7 - Parity Enable
13040: # 8 - Stop Bits (One/Two)
13041: #
13042: # Switch B:
13043: # 1 - Upper/Lower Shift
13044: # 2 - Typewriter Shift
13045: # 3 - Half Duplex / Full Duplex
13046: # 4 - Light/Dark Background
13047: # 5-6 - Carriage Return Without / With Line Feed
13048: # 7 - Extended Mode
13049: # 8 - Suppress Keyboard Display
13050: #
13051: # Switch C:
13052: # 1 - End of line entry disabled/enabled
13053: # 2 - Conversational mode / (Local?) Mode
13054: # 3 - Control characters displayed / not displayed
13055: # 4 - (2-wire?) / 4-wire communications
13056: # 5 - RTS on and off for each character
13057: # 6 - (50Hz?) / 60 Hz
13058: # 7 - Exit after level zero diagnostics
13059: # 8 - RS-232 interface
13060: #
13061: # Switch D:
13062: # 1 - Reverse Channel (yes / no)
13063: # 2 - Manual answer (no / yes)
13064: # 3-4 - Cursor appearance
13065: # 5 - Communication Rate
13066: # 6 - Enable / Disable EXT turnoff
13067: # 7 - Enable / Disable CR turnoff
13068: # 8 - Enable / Disable backspace
13069: #
1.14 millert 13070: # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
13071: # reverse, blink, dim, and underline) the appropriate number of bits (by
13072: # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
13073: # '@' is (effectively) "or"ed with each attribute to generate the proper third
13074: # character in the <ESC>0 sequence. The <sgr> string implements the following
13075: # equation:
13076: #
13077: # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
13078: # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
13079: #
13080: # Where: P1 <==> Standout attribute parameter
13081: # P2 <==> Underline attribute parameter
13082: # P3 <==> Reverse attribute parameter
13083: # P4 <==> Blink attribute parameter
13084: # P5 <==> Dim attribute parameter
1.1 millert 13085: # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
1.11 millert 13086: ncr7900i|ncr7900|ncr 7900 model 1,
13087: am, bw, ul,
13088: cols#80, lines#24, xmc#1,
13089: bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
13090: cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
13091: is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
13092: kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
13093: rmul=\E0@,
13094: sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
13095: sgr0=\E0@, smso=\E0Q, smul=\E0`,
13096: ncr7900iv|ncr 7900 model 4,
13097: am, bw, eslok, hs,
13098: cols#80, lines#24,
13099: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
13100: cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
13101: fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
13102: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
13103: kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
13104: khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
13105: tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
1.14 millert 13106: # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
13107: # The user can enter a CTRL-B to get out of this locked state.
13108: # In <hpa>, we want to output the character given by the formula:
13109: # ((col / 10) * 16) + (col % 10) where "col" is "p1"
1.11 millert 13110: ncr7901|ncr 7901 model,
13111: am, bw, ul,
13112: cols#80, lines#24,
13113: bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
13114: cub1=^H, cud1=^J, cuf1=^F,
13115: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
13116: ed=\Ek, el=\EK,
13117: hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
13118: is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
13119: khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
13120: sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
13121: sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
13122: vpa=\013%p1%{64}%+%c,
1.1 millert 13123:
13124: #### Perkin-Elmer (Owl)
13125: #
13126: # These are official terminfo entries from within Perkin-Elmer.
13127: #
13128:
1.11 millert 13129: bantam|pe550|pe6100|perkin elmer 550,
13130: OTbs,
13131: cols#80, lines#24,
13132: bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13133: cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13134: el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
13135: fox|pe1100|perkin elmer 1100,
13136: OTbs, am,
13137: cols#80, lines#24,
13138: bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
13139: cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13140: ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
13141: home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
13142: owl|pe1200|perkin elmer 1200,
13143: OTbs, am, in,
13144: cols#80, lines#24,
13145: bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
13146: cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13147: dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
13148: el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
13149: hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
13150: kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
13151: kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
13152: rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
13153: pe1251|pe6300|pe6312|perkin elmer 1251,
13154: am,
13155: cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
13156: bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
13157: cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13158: ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
13159: kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
13160: kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
1.1 millert 13161: # (pe7000m: this had
13162: # rmul=\E!\0, smul=\E!\040,
13163: # which is probably wrong, it collides with kf0
1.11 millert 13164: pe7000m|perkin elmer 7000 series monochrome monitor,
13165: am,
13166: cols#80, lines#24,
13167: bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
13168: cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
13169: ed=\EJ, el=\EI, home=\EH, ind=^J,
13170: is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
13171: kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
13172: kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
13173: kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
13174: ll=\ES7\s, ri=\ER,
1.1 millert 13175: pe7000c|perkin elmer 7000 series colour monitor,
1.11 millert 13176: is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
13177: rmul=\E!\0, smso=\Eb2, smul=\E!\s,
13178: use=pe7000m,
1.1 millert 13179:
13180: #### Sperry Univac
13181: #
13182: # Sperry Univac has merged with Burroughs to form Unisys.
13183: #
13184:
13185: # This entry is for the Sperry UTS30 terminal running the TTY
13186: # utility under control of CP/M Plus 1R1. The functionality
13187: # provided is comparable to the DEC vt100.
13188: # (uts30: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 13189: uts30|sperry uts30 with cp/m@1R1,
13190: am, bw, hs,
13191: cols#80, lines#24, wsl#40,
13192: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13193: bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
13194: cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
13195: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
13196: cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
13197: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
13198: dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
13199: ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
13200: ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
13201: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
13202: rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
13203: rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
13204: rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13205: sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
13206: smul=\E[4m, tsl=\E], uc=\EPB,
1.1 millert 13207:
13208: #### Tandem
13209: #
13210: # Tandem builds these things for use with its line of fault-tolerant
13211: # transaction-processing computers. They aren't generally available
13212: # on the merchant market, and so are fairly uncommon.
13213: #
13214:
13215: tandem6510|adm3a repackaged by Tandem,
1.11 millert 13216: use=adm3a,
1.1 millert 13217:
13218: # A funny series of terminal that TANDEM uses. The actual model numbers
13219: # have a fourth digit after 653 that designates minor variants. These are
13220: # natively block-mode and rather ugly, but they have a character mode which
13221: # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
13222: # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
13223: # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
13224: tandem653|t653x|Tandem 653x multipage terminal,
1.11 millert 13225: OTbs, am, da, db, hs,
1.1 millert 13226: cols#80, lines#24, wsl#64, xmc#1,
13227: clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
1.11 millert 13228: cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
13229: ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
13230: rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
1.1 millert 13231:
13232: #### Tandy/Radio Shack
13233: #
13234: # Tandy has a line of VDTs distinct from its microcomputers.
13235: #
13236:
13237: dmterm|deskmate terminal,
13238: am, bw,
13239: cols#80, lines#24,
1.11 millert 13240: bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
13241: cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
13242: cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
13243: ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
13244: kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
13245: kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
13246: khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
13247: lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
13248: use=adm+sgr,
1.1 millert 13249: dt100|dt-100|Tandy DT-100 terminal,
13250: xon,
13251: cols#80, lines#24, xmc#1,
1.11 millert 13252: acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
1.1 millert 13253: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
1.11 millert 13254: csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
13255: cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
13256: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
13257: il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
13258: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
13259: kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
13260: kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
13261: knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
13262: lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
13263: sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
13264: dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
13265: cols#132, use=dt100,
1.1 millert 13266: dt110|Tandy DT-110 emulating ansi,
13267: xon,
13268: cols#80, lines#24,
1.11 millert 13269: acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
1.1 millert 13270: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
1.11 millert 13271: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
13272: cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
13273: dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
13274: ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
13275: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
13276: kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
13277: kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
13278: khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
13279: lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
13280: lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
13281: smacs=^N, smso=\E[7m, smul=\E[4m,
13282: pt210|TRS-80 PT-210 printing terminal,
1.1 millert 13283: hc, os,
13284: cols#80,
13285: bel=^G, cr=^M, cud1=^J, ind=^J,
13286:
13287: #### Tektronix (tek)
13288: #
13289: # Tektronix tubes are graphics terminals. Most of them use modified
13290: # oscilloscope technology incorporating a long-persistence green phosphor,
13291: # and support vector graphics on a main screen with an attached "dialogue
13292: # area" for interactive text.
13293: #
13294:
1.11 millert 13295: tek|tek4012|tektronix 4012,
13296: OTbs, os,
13297: cols#75, lines#35,
13298: bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
13299: ff=\014$<1000>, is2=\E^O,
1.1 millert 13300: # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
1.11 millert 13301: tek4013|tektronix 4013,
13302: acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
13303: tek4014|tektronix 4014,
13304: cols#81, lines#38,
13305: is2=\E\017\E9, use=tek4012,
1.1 millert 13306: # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
1.11 millert 13307: tek4015|tektronix 4015,
13308: acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
13309: tek4014-sm|tektronix 4014 in small font,
13310: cols#121, lines#58,
13311: is2=\E\017\E\:, use=tek4014,
1.1 millert 13312: # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
1.11 millert 13313: tek4015-sm|tektronix 4015 in small font,
13314: acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
1.1 millert 13315: # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
13316: #
13317: # You need to have "stty nl2" in effect. Some versions of tset(1) know
13318: # how to set it for you.
13319: #
13320: # It's got the Magic Cookie problem around stand-out mode. If you can't
13321: # live with Magic Cookie, remove the :so: and :se: fields and do without
13322: # reverse video. If you like reverse video stand-out mode but don't want
13323: # it to flash, change the letter 'H' to 'P' in the :so: field.
1.11 millert 13324: tek4023|tektronix 4023,
13325: OTbs, am,
13326: OTdN#4, cols#80, lines#24, vt#4, xmc#1,
13327: OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
13328: cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
13329: rmso=^_@, smso=^_P,
1.1 millert 13330: # It is recommended that you run the 4025 at 4800 baud or less;
13331: # various bugs in the terminal appear at 9600. It wedges at the
13332: # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
13333: # on keyboard don't work. You have to hit BREAK twice to get
13334: # one break at any speed - this is a documented feature.
13335: # Can't use cursor motion because it's memory relative, and
13336: # because it only works in the workspace, not the monitor.
13337: # Same for home. Likewise, standout only works in the workspace.
13338: #
13339: # <el> was commented out since vi and rogue seem to work better
13340: # simulating it with lots of spaces!
13341: #
13342: # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
13343: # and didn't seem necessary.
13344: #
1.11 millert 13345: tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
13346: OTbs, am, da, db,
13347: cols#80, it#8, lines#34, lm#0,
13348: bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
13349: cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
13350: cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
13351: cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
13352: dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
13353: ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
13354: il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
13355: ind=^F^J,
13356: is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
13357: rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
13358: smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
13359: tek4025-17|tek 4025 17 line window,
13360: lines#17, use=tek4025,
13361: tek4025-17-ws|tek 4025 17 line window in workspace,
13362: is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
13363: rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
13364: smso=\037att e\r,
13365: use=tek4025-17,
13366: tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
13367: is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
13368: rmcup=\037com 33\r, smcup=!com 31\r,
13369: use=tek4025,
1.1 millert 13370: # Tektronix 4025a
13371: # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
13372: # The following status modes are assumed for normal operation (replace the
13373: # initial "!" by whatever the current command character is):
13374: # !COM 29 # NOTE: changes command character to GS (^])
13375: # ^]DUP
13376: # ^]ECH R
13377: # ^]EOL
13378: # ^]RSS T
13379: # ^]SNO N
13380: # ^]STO 9 17 25 33 41 49 57 65 73
13381: # Other modes may be set according to communication requirements.
13382: # If the command character is inadvertently changed, termcap can't restore it.
13383: # Insert-character cannot be made to work on both top and bottom rows.
13384: # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
13385: # There also seems to be a problem with vertical motion, perhaps involving
13386: # delete/insert-line, following a typed carriage return. This terminal sucks.
13387: # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13388: # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
13389: # work any more. -- esr)
13390: tek4025a|Tektronix 4025A,
13391: OTbs, OTpt, am, bw, da, db, xon,
13392: cols#80, it#8, lines#34,
1.11 millert 13393: bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
13394: cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
13395: cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
13396: cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
13397: dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
13398: el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
13399: il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
13400: rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
13401: tbc=\035sto;,
1.1 millert 13402: # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
13403: # Here's the command file that I use to get rogue to work on the 4025.
13404: # It should work with any program using the old curses (e.g. it better
13405: # not try to scroll, or cursor addressing won't work. Also, you can't
13406: # see the cursor.)
13407: # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
13408: tek4025-cr|tek 4025 for curses and rogue,
1.11 millert 13409: OTbs, am,
1.1 millert 13410: cols#80, it#8, lines#33,
1.11 millert 13411: clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
13412: cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
1.1 millert 13413: is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
13414: rmcup=\037wor 0, smcup=\037wor 33h,
13415: # next two lines commented out since curses only allows 128 chars, sigh.
13416: # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
13417: # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
13418: tek4025ex|4025ex|4027ex|tek 4025 w/!,
1.11 millert 13419: is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
13420: rmcup=\037com 33\r, smcup=!com 31\r,
13421: use=tek4025,
13422: tek4105|tektronix 4105,
13423: OTbs, am, mir, msgr, ul, xenl, xt,
13424: cols#79, it#8, lines#29,
13425: acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
13426: clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
13427: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
13428: dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
13429: il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
13430: is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
13431: kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
13432: rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
13433: rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
13434: smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
13435: smul=\E[=5;<2m, tbc=\E[1g,
1.1 millert 13436:
13437: # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 13438: tek4105-30|4015 emulating 30 line vt100,
13439: am, mir, msgr, xenl, xon,
13440: cols#80, it#8, lines#30, vt#3,
13441: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13442: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13443: clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13444: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13445: cuf=\E[%p1%dC, cuf1=\E[C$<2>,
13446: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
13447: cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
13448: enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, ka1=\EOq,
13449: ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD,
13450: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy,
13451: kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
13452: kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
13453: rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13454: rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13455: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13456: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
13457: sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13458: smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
1.1 millert 13459:
13460: # Tektronix 4105 from BRL
13461: # The following setup modes are assumed for normal operation:
13462: # CODE ansi CRLF no DABUFFER 141
13463: # DAENABLE yes DALINES 30 DAMODE replace
13464: # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
13465: # FLAGGING input INSERTREPLACE replace LFCR no
13466: # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
13467: # SELECTCHARSET G1 0 TABS -2
13468: # Other setup modes may be set for operator convenience or communication
13469: # requirements; I recommend
13470: # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
13471: # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
13472: # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
13473: # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
13474: # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
13475: # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
13476: # XMTDELAY 0
13477: # and factory color maps. After setting these modes, save them with NVSAVE. No
13478: # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13479: # "IC" cannot be used in combination with "im" & "ei".
13480: # "tek4105a" is just a guess:
13481: tek4105a|Tektronix 4105,
13482: OTbs, OTpt, msgr, xon,
13483: OTkn#8, cols#80, it#8, lines#30, vt#3,
13484: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13485: civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
13486: cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13487: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13488: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13489: cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
13490: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13491: ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
13492: il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
13493: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13494: kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
13495: kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
13496: lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
13497: rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
1.11 millert 13498: rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
13499: rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
13500: sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
1.1 millert 13501: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13502:
13503: #
13504: # Tektronix 4106/4107/4109 from BRL
13505: # The following setup modes are assumed for normal operation:
13506: # CODE ansi COLUMNMODE 80 CRLF no
13507: # DABUFFER 141 DAENABLE yes DALINES 32
13508: # DAMODE replace DAVISIBILITY yes ECHO no
13509: # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
13510: # LFCR no LOCKKEYBOARD no ORIGINMODE relative
13511: # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
13512: # TABS -2
13513: # Other setup modes may be set for operator convenience or communication
13514: # requirements; I recommend
13515: # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
13516: # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
13517: # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
13518: # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
13519: # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
13520: # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
13521: # XMTDELAY 0
13522: # and factory color maps. After setting these modes, save them with NVSAVE. No
13523: # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13524: # "IC" cannot be used in combination with "im" & "ei".
13525: tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
13526: msgr, xon,
13527: cols#80, it#8, lines#32, vt#3,
13528: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13529: civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
13530: cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13531: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13532: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13533: cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
13534: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13535: ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
13536: il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
13537: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13538: kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
13539: kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
13540: lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
13541: rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
13542: rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
13543: rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
13544: sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
13545: smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
13546:
1.11 millert 13547: tek4107|tek4109|tektronix terminals 4107 4109,
13548: OTbs, am, mir, msgr, ul, xenl, xt,
13549: cols#79, it#8, lines#29,
13550: bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
13551: bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
13552: cub1=^H, cud1=^J, cuf1=\EC,
13553: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
13554: dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
13555: kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
13556: rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
13557: rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
13558: sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m\E%%!0,
13559: sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
13560: smul=\E%!1\E[4m$<2>\E%!0,
1.1 millert 13561: # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
13562: # see the note attached to tek4207.
13563: tek4207-s|Tektronix 4207 with sysline but no memory,
13564: eslok, hs,
13565: dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
13566: is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
13567: is2=\E7\E[?6l\E[2K\E[?6h\E8,
1.11 millert 13568: tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
1.1 millert 13569:
13570: # The 4110 series may be a wonderful graphics series, but they make the 4025
13571: # look good for screen editing. In the dialog area, you can't move the cursor
13572: # off the bottom line. Out of the dialog area, ^K moves it up, but there
13573: # is no way to scroll.
13574: #
13575: # Note that there is a floppy for free from Tek that makes the
13576: # 4112 emulate the vt52 (use the vt52 termcap). There is also
13577: # an expected enhancement that will use ANSI standard sequences.
13578: #
13579: # 4112 in non-dialog area pretending to scroll. It really wraps
13580: # but vi is said to work (more or less) in this mode.
13581: #
13582: # 'vi' works reasonably well with this entry.
13583: #
1.11 millert 13584: otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
13585: am,
13586: cols#80, lines#34,
13587: bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
13588: rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
1.1 millert 13589: # The 4112 with the ANSI compatibility enhancement
13590: tek4112|tek4114|tektronix 4110 series,
1.11 millert 13591: OTbs, am, db,
1.1 millert 13592: cols#80, lines#34,
13593: cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
1.11 millert 13594: cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
13595: ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
13596: ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
13597: rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
1.1 millert 13598: tek4112-nd|4112 not in dialog area,
13599: OTns,
1.11 millert 13600: cuu1=^K, use=tek4112,
1.1 millert 13601: tek4112-5|4112 in 5 line dialog area,
1.11 millert 13602: lines#5, use=tek4112,
1.1 millert 13603: # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
13604: # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
13605: # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
13606: # previously \0410 and \0411 sequences...I don't *think* they were supposed
13607: # to be 4-digit octal -- esr)
13608: tek4113|tektronix 4113 color graphics with 5 line dialog area,
1.11 millert 13609: OTbs, am, da, eo,
1.1 millert 13610: cols#80, lines#5,
13611: clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
13612: flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
13613: is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
13614: tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
13615: lines#34,
1.11 millert 13616: is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
1.1 millert 13617: # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
13618: # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
13619: # :vb: needs enough delay to let you see the background color being toggled.
13620: tek4113-nd|tektronix 4113 color graphics with no dialog area,
1.11 millert 13621: OTbs, am, eo,
1.1 millert 13622: cols#80, it#8, lines#34,
13623: clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
1.11 millert 13624: cvvis=\ELZ\EKA0,
1.1 millert 13625: flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
1.11 millert 13626: home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
13627: ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
1.1 millert 13628: # This entry is from Tek. Inc. (Brian Biehl)
13629: # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
13630: otek4115|Tektronix 4115,
13631: OTbs, am, da, db, eo,
13632: cols#80, it#8, lines#34,
13633: cbt=\E[Z, clear=\E[H\E[2J,
1.11 millert 13634: cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
13635: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
13636: cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
13637: el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
13638: il1=\E[L,
1.1 millert 13639: is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
1.11 millert 13640: kbs=^H, ri=\EM, rmam=\E[?7l,
13641: rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
13642: rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
13643: smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
13644: smul=\E[4m,
13645: tek4115|newer tektronix 4115 entry with more ANSI capabilities,
13646: am, xon,
13647: cols#80, lines#34,
13648: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
13649: cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13650: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13651: cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
13652: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
13653: ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
13654: il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
13655: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
13656: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
13657: rmso=\E[m, rmul=\E[m,
13658: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
13659: sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
13660: vpa=\E[%p1%{1}%+%dd,
1.1 millert 13661: # The tek4125 emulates a vt100 incorrectly - the scrolling region
13662: # command is ignored. The following entry replaces <csr> with the needed
13663: # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
13664: # chokes on; and adds a lot of initialization for the tek dialog area.
13665: # Note that this entry uses all 34 lines and sets the cursor color to green.
13666: # Steve Jacobson 8/85
13667: # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
13668: # commented out, <smir>=\E1 because there's no <rmir> -- esr)
13669: tek4125|tektronix 4125,
13670: lines#34,
13671: csr@, dl1=\E[1M, il1=\E[1L,
13672: is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1.11 millert 13673: rc@, sc@, smkx=\E=,
13674: use=vt100,
1.1 millert 13675:
13676: # From: <jcoker@ucbic>
13677: # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
13678: # supplied another, less capable 4107 entry. So we'll use that for 4107 and
13679: # note that if jcoker wasn't confused you may be able to use this one.
13680: # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
13681: tek4207|Tektronix 4207 graphics terminal with memory,
13682: am, bw, mir, msgr, ul, xenl,
13683: cols#80, it#8, lines#32,
1.11 millert 13684: blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
13685: cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13686: cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
13687: el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
13688: il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
1.1 millert 13689: is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
1.11 millert 13690: kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
13691: rev=\E[7m, ri=\E[T,
13692: rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
13693: rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
1.1 millert 13694: smul=\E[4m, tbc=\E[1g,
13695:
13696: # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
13697: # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
13698: # Tab had been given as \E2I,that must be the tab-set capability -- esr)
13699: tek4404|tektronix 4404,
1.11 millert 13700: OTbs,
13701: cols#80, it#8, lines#32,
1.1 millert 13702: blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
13703: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
1.11 millert 13704: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
13705: ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
13706: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
13707: rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
13708: rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
13709: smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
13710: smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
1.1 millert 13711: # Some unknown person wrote:
13712: # I added the is string - straight Unix has ESC ; in the login
13713: # string which sets a ct8500 into monitor mode (aka 4025 snoopy
13714: # mode). The is string here cleans up a few things (but not
13715: # everything).
1.11 millert 13716: ct8500|tektronix ct8500,
13717: am, bw, da, db,
13718: cols#80, lines#25,
13719: bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
13720: cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
13721: dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
13722: il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
13723: rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
1.1 millert 13724:
1.11 millert 13725: # Tektronix 4205 terminal.
1.1 millert 13726: #
1.11 millert 13727: # am is not defined because the wrap around occurs not when the char.
13728: # is placed in the 80'th column, but when we are attempting to type
13729: # the 81'st character on the line. (esr: hmm, this is like the vt100
13730: # version of xenl, perhaps am + xenl would work!)
1.1 millert 13731: #
1.11 millert 13732: # Bold, dim, and standout are simulated by colors and thus not allowed
13733: # with colors. The tektronix color table is mapped into the RGB color
13734: # table by setf/setb. All colors are reset to factory specifications by oc.
13735: # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
13736: # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
13737: # interval then maps into pre-defined value.
13738: tek4205|tektronix 4205,
13739: ccc, mir, msgr,
13740: colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
13741: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13742: bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
13743: clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
1.1 millert 13744: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13745: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.11 millert 13746: dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
13747: ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
13748: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
13749: initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
13750: invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
13751: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
13752: kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
13753: kf7=\ES,
13754: oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
13755: op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
13756: rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
13757: setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
13758: setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
13759: sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
13760: smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
13761: smul=\E[4m, tbc=\E[1g,
1.1 millert 13762:
1.11 millert 13763: #### Teletype (tty)
1.1 millert 13764: #
1.11 millert 13765: # These are the hardcopy Teletypes from before AT&T bought the company,
13766: # clattering electromechanical dinosaurs in Bakelite cases that printed on
13767: # pulpy yellow roll paper. If you remember these you go back a ways.
13768: # Teletype-branded VDTs are listed in the AT&T section.
1.1 millert 13769: #
1.11 millert 13770: # The earliest UNIXes were designed to use these clunkers; nroff and a few
13771: # other programs still default to emitting codes for the Model 37.
1.1 millert 13772: #
13773:
1.11 millert 13774: tty33|tty35|model 33 or 35 teletype,
13775: hc, os, xon,
13776: cols#72,
13777: bel=^G, cr=^M, cud1=^J, ind=^J,
13778: tty37|model 37 teletype,
13779: OTbs, hc, os, xon,
13780: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
13781: ind=^J,
1.1 millert 13782:
1.11 millert 13783: # There are known to be at least three flavors of the tty40, all seem more
13784: # like IBM half duplex forms fillers than ASCII terminals. They have lots of
13785: # awful braindamage, such as printing a visible newline indicator after each
13786: # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
13787: # braindamaged but has hope and is described here. The 40-4 is a 3270
13788: # lookalike and beyond hope. The terminal has visible bell but I don't know
13789: # it - it's null here to prevent it from showing the BL character.
13790: # There is an \EG in <nl> because of a bug in old vi (if stty says you have
13791: # a "newline" style terminal (-crmode) vi figures all it needs is nl
13792: # to get crlf, even if <cr> is not ^M.)
13793: # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
13794: tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
13795: OTbs, xon,
13796: cols#80, lines#24,
13797: clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
13798: cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
13799: ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
13800: ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
13801: kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
13802: rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
13803: tty43|model 43 teletype,
13804: OTbs, am, hc, os, xon,
13805: cols#132,
13806: bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
1.1 millert 13807:
1.11 millert 13808: #### Tymshare
1.1 millert 13809: #
13810:
1.11 millert 13811: # You can add <is2=\E<> to put this 40-column mode, though I can't
13812: # for the life of me think why anyone would want to.
13813: scanset|sc410|sc415|Tymshare Scan Set,
13814: am, bw, msgr,
13815: cols#80, lines#24,
13816: acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
13817: cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
13818: cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
13819: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
13820: mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
13821:
13822: #### Volker-Craig (vc)
1.1 millert 13823: #
1.11 millert 13824: # If you saw a Byte Magazine cover with a terminal on it during the early
13825: # 1980s, it was probably one of these. Carl Helmers liked them because
13826: # they could crank 19.2 and were cheap (that is, he liked them until he tried
13827: # to program one...)
1.1 millert 13828: #
13829:
1.11 millert 13830: # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
13831: # every other linefeed.
13832: vc303|vc103|vc203|volker-craig 303,
13833: OTbs, OTns, am,
13834: cols#80, lines#24,
13835: bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
13836: cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
13837: kcuu1=^N, ll=\017$<1>W,
13838: vc303a|vc403a|volker-craig 303a,
13839: clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
13840: home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
13841: # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
13842: vc404|volker-craig 404,
13843: OTbs, am,
13844: cols#80, lines#24,
13845: bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13846: cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
13847: ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
13848: kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
13849: vc404-s|volker-craig 404 w/standout mode,
13850: cud1=^J, rmso=^O, smso=^N, use=vc404,
13851: # From: <wolfgang@cs.sfu.ca>
13852: # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
13853: vc414|vc414h|Volker-Craig 414H in sane escape mode.,
13854: OTbs, am,
13855: cols#80, lines#24,
13856: clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
13857: cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
13858: dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
13859: ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
13860: kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
13861: kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
13862: lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
13863: rmso=\E^_, smso=\E^Y,
13864: vc415|volker-craig 415,
13865: clear=^L, use=vc404,
13866:
13867: ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
1.1 millert 13868: #
13869:
1.11 millert 13870: #### IBM PC and clones
1.1 millert 13871: #
13872:
1.11 millert 13873: # The pcplot IBM-PC terminal emulation program is really messed up. It is
13874: # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
13875: # doesn't support scrolling regions, ignores add line commands, and ignores
13876: # delete line commands. Consequently, the resulting behavior looks like a
13877: # crude adm3a-type terminal.
13878: # Steve Jacobson 8/85
13879: pcplot|pc-plot terminal emulation program,
13880: xenl@,
13881: csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
13882: # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
13883: # I've found that my KayPro II, running MDM730, continues to emulate an
13884: # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
13885: # system the following termcap entry works well:
13886: # I have noticed a couple of minor glitches, but nothing I can't work
13887: # around. (I added two capabilities from the BRL entry -- esr)
13888: kaypro|kaypro2|kaypro II,
13889: OTbs, am,
13890: cols#80, lines#24,
13891: bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
13892: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
13893: el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
13894:
13895: # From IBM, Thu May 5 19:35:27 1983
1.14 millert 13896: # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
1.11 millert 13897: ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
13898: OTbs, am,
1.1 millert 13899: cols#80, lines#24,
1.11 millert 13900: bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
13901: cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
13902:
13903: ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
13904: OTbs, am, bw, eo, hs, km, msgr, ul,
13905: cols#80, it#8, lines#24,
13906: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
13907: bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
13908: cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
13909: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13910: cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
13911: home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
13912: indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
13913: kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13914: kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
13915: kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
13916: kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, ll=\E[24;1H,
13917: nel=^M, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
13918: rmso=\E[m, rmul=\E[m,
13919: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
13920: sgr0=\E[m, smso=\E[7m, smul=\E[4m,
1.1 millert 13921:
1.11 millert 13922: #### Apple II
13923: #
13924: # Apple II firmware console first, then various 80-column cards and
13925: # terminal emulators. For two cents I'd toss all these in the UFO file
13926: # along with the 40-column apple entries.
1.1 millert 13927: #
1.11 millert 13928:
13929: # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
13930: # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
13931: # function of TIC, not the firmware.
13932: # The clear key on a IIgs will do something like clear-screen,
13933: # depending on what you're in.
13934: appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
13935: OTbs, am, bw, eo, msgr,
13936: cols#80, it#8, lines#24,
13937: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
13938: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
13939: home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
13940: kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
13941: smso=^O,
13942: # Apple //e with 80-column card, entry from BRL
13943: # The modem interface is permitted to discard LF (maybe DC1), otherwise
13944: # passing characters to the 80-column firmware via COUT (PR#3 assumed).
13945: # Auto-wrap does not work right due to newline scrolling delay, which also
13946: # requires that you set "stty cr2".
13947: # Note: Cursor addressing is only available via the Pascal V1.1 entry,
13948: # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
13949: # using a terminal emulation program instead of the built-in firmware.
13950: apple2e|Apple //e,
13951: bw, msgr,
13952: cols#80, lines#24,
13953: bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
13954: ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
13955: is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
13956: nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
13957: smso=^O,
13958: # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
13959: # 4.20, with incoming and outgoing terminals both on 0, emulation On.
13960: apple2e-p|Apple //e via Pascal,
13961: cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
13962: kcud1=^J,
13963: use=apple2e,
13964: # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
13965: # Enable DC3/DC1 flow control with "stty ixon -ixany".
13966: apple-ae|ASCII Express,
13967: OTbs, am, bw, msgr, nxon, xon,
13968: cols#80, it#8, lines#24,
13969: bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13970: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
13971: home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
13972: kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
13973: smso=^O,
13974: appleII|apple ii plus,
13975: OTbs, am,
13976: cols#80, it#8, lines#24,
13977: clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
13978: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
13979: ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
13980: is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
13981: smso=^O,
13982: # Originally by Gary Ford 21NOV83
13983: # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
13984: apple-80|apple II with smarterm 80 col,
13985: OTbs, am, bw,
13986: cols#80, lines#24,
13987: cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
13988: cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
13989: ed=\013$<10*/>, el=\035$<10/>, home=^Y,
13990: apple-soroc|apple emulating soroc 120,
13991: am,
13992: cols#80, lines#24,
13993: bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13994: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
13995: home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13996: # From Peter Harrison, Computer Graphics Lab, San Francisco
13997: # ucbvax!ucsfmis!harrison .....uucp
13998: # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
13999: # "These two work. If you don't have the inverse video chip for the
14000: # Apple with videx then remove the :so: and :se: fields."
14001: # (apple-videx: this used to be called DaleApple -- esr)
14002: apple-videx|Apple with videx videoterm 80 column board with inverse video,
14003: OTbs, am, xenl,
14004: cols#80, it#8, lines#24,
14005: clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
14006: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14007: home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
14008: rmso=^Z2, sgr0=^Z2, smso=^Z3,
14009: # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
14010: # Apple Cat ][ 212 modem, + more all
14011: # controlled by ASCII Express: Pro.
14012: # From Dave Shaver <isucs1!shaver>
14013: apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
14014: OTbs, am, eo, xt,
14015: cols#80, lines#24,
14016: acsc=, clear=^L, cuf1=^\,
14017: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14018: flash=^W35^W06, home=^Y,
14019: is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
14020: rmso=^N, smso=^O,
14021: apple-uterm|Ultraterm for Apple micros,
14022: OTbs, am, eo, xt,
14023: cols#80, lines#24,
14024: acsc=, clear=^L, cuf1=^\,
14025: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14026: home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
14027: # from trwrba!bwong (Bradley W. Wong):
1.1 millert 14028: #
1.11 millert 14029: # This entry assumes that you are using an apple with the UCSD Pascal
14030: # language card. SYSTEM.MISCINFO is assumed to be the same as that
14031: # supplied with the standard apple except that screenwidth should be set
14032: # using SETUP to 80 columns. Note that the right arrow in not mapped in
14033: # this termcap entry. This is because that key, on the Apple, transmits
14034: # a ^U and would thus preempt the more useful "up" function of vi.
1.1 millert 14035: #
1.11 millert 14036: # HMH 2/23/81
14037: apple80p|80-column apple with Pascal card,
14038: am, bw,
14039: cols#80, lines#24,
14040: clear=^Y^L, cuf1=^\\:,
14041: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14042: home=^Y, kcub1=^H,
1.1 millert 14043: #
1.11 millert 14044: # Apple II+ equipped with Videx 80 column card
1.1 millert 14045: #
1.11 millert 14046: # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
14047: # manually converted by D A Gwyn
1.1 millert 14048: #
1.11 millert 14049: # DO NOT use any terminal emulation with this data base, it works directly
14050: # with the Videx card. This has been tested with vi 1200 baud and works fine.
1.1 millert 14051: #
1.11 millert 14052: # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
14053: # 1 screen, while in R2 ^U doesn't.
14054: # For inverse alternate character set add:
14055: # <smacs>=^O:<rmacs>=^N:
14056: # (apple-v: added it#8 -- esr)
14057: apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
14058: am, xenl,
14059: cols#80, it#8, lines#24,
14060: bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
14061: cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
14062: cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
14063: ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
14064: khome=^Y, rmso=^Z2, smso=^Z3,
14065: apple-videx3|vapple|Apple II with 80 col card,
14066: OTbs, am,
14067: cols#80, lines#24,
14068: clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
14069: cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
14070: kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
14071: kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%, kf9=\E&, khome=\EH,
14072: #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
14073: aepro|Apple II+ running ASCII Express Pro--vt52,
14074: OTbs,
14075: cols#80, lines#24,
14076: clear=\014$<300/>, cuf1=\EC,
14077: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14078: el=\EK, home=\EH,
14079: # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
14080: apple-vm80|ap-vm80|apple with viewmax-80,
14081: OTbs,
14082: cols#80, lines#24,
14083: clear=\014$<300/>, cuf1=^\\:,
14084: cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
14085: ed=\013$<300/>, el=^], home=\031$<200/>,
1.1 millert 14086:
1.11 millert 14087: #### Apple Lisa & Macintosh
14088: #
1.1 millert 14089:
1.11 millert 14090: # (lisa: changed <cvvis> to <cnorm> -- esr)
14091: lisa|apple lisa console display (black on white),
14092: OTbs, am, eo, msgr,
14093: cols#88, it#8, lines#32,
14094: acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
14095: cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
14096: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
14097: ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
14098: is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
14099: kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
14100: sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
14101: liswb|apple lisa console display (white on black),
14102: is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
14103: smso=\E[m, smul=\E[4m, use=lisa,
1.1 millert 14104:
1.11 millert 14105: # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
14106: # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
14107: #
14108: # These entries assume that the 'Auto Wraparound' is enabled.
14109: # Xon-Xoff flow control should also be enabled.
1.1 millert 14110: #
1.11 millert 14111: # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
14112: # settings are in non-volatile memory and don't need to be reset upon login.
14113: # Also setting the number of columns glitches the screen annoyingly.
14114: # You can type "reset" to get them set.
1.1 millert 14115: #
1.11 millert 14116: lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
14117: OTbs, OTpt, am, xenl, xon,
14118: OTkn#4, cols#80, it#8, lines#24, vt#3,
14119: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
14120: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14121: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
14122: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
14123: el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
14124: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
14125: kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
14126: rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
14127: rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
14128: sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
14129: tbc=\E[3g,
14130: # Lisaterm in 132 column ("wide") mode.
14131: lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
14132: cols#132,
14133: kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
14134: # Although MacTerminal has insert/delete line, it is commented out here
14135: # since it is much faster and cleaner to use the "lock scrolling region"
14136: # method of inserting and deleting lines due to the MacTerminal implementation.
14137: # Also, the "Insert/delete ch" strings have an extra character appended to them
14138: # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
14139: # supported by MacTerminal.
14140: mac|macintosh|Macintosh with MacTerminal,
14141: xenl,
14142: OTdN#30,
14143: blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
14144: # Lisaterm in 132 column ("wide") mode.
14145: mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
14146: cols#132, use=mac,
1.1 millert 14147:
1.11 millert 14148: #### Radio Shack/Tandy
1.1 millert 14149: #
14150:
1.11 millert 14151: # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
14152: # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
14153: # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
14154: coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
14155: OTbs, am,
14156: cols#80, it#8, lines#24,
14157: bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
14158: clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
14159: cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
14160: dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
14161: kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
14162: sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
14163: # (trs2: removed obsolete ":nl=^_:" -- esr)
14164: trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
14165: OTbs, am, msgr,
14166: cols#80, it#8, lines#24,
14167: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
14168: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
14169: el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
14170: kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
14171: # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
14172: # (This had extension capabilities
14173: # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
14174: # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
14175: # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
14176: trs16|trs-80 model 16 console,
14177: OTbs, am,
14178: cols#80, it#8, lines#24,
14179: acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
14180: cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
14181: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
14182: dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
14183: ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14184: kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
14185: khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
14186: lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
14187: smacs=\ERG, smso=\ERD,
1.1 millert 14188:
1.11 millert 14189: #### Atari ST
1.1 millert 14190: #
14191:
1.11 millert 14192: # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
14193: atari|atari st,
14194: OTbs, am,
14195: cols#80, it#8, lines#25,
14196: clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
14197: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
14198: ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
14199: kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
14200: # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
14201: # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
14202: uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
14203: lines#49,
14204: is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
14205: # MiNT VT52 emulation. 80 columns, 25 rows.
14206: # MiNT is Now TOS, the operating system which comes with all Ataris now
14207: # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
14208: # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
14209: # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
14210: st52|Atari ST with VT52 emulation,
14211: am, km,
1.1 millert 14212: cols#80, lines#25,
1.11 millert 14213: bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
14214: cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
14215: cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
14216: ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
14217: kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
14218: kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
14219: kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
14220: kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
14221: ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
14222: smcup=\Ee, smso=\Ep,
14223:
14224: #### Commodore Business Machines
1.1 millert 14225: #
1.11 millert 14226: # Formerly located in West Chester, PA; went spectacularly bust in 1994
14227: # after years of shaky engineering and egregious mismanagement. Made one
14228: # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
14229: # C-128, VIC-20). The C-64 is said to have been the most popular machine
14230: # ever (most units sold); they can still be found gathering dust in closets
14231: # everywhere.
1.1 millert 14232: #
14233:
1.11 millert 14234: # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
14235: # Added a few more entries, converted caret-type control sequence (^x) entries
14236: # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
1.14 millert 14237: # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
1.11 millert 14238: #
14239: # :as:, :ae: Support for alternate character sets.
14240: # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
14241: # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
14242: # This one appears to fix a problem I always had with a line ending
14243: # at 'width+1' (I think) followed by a blank line in vi. The blank
14244: # line tended to disappear and reappear depending on how the screen
14245: # was refreshed. Note that this is probably needed only if you use
14246: # something like a Dnet Fterm with the window sized to some peculiar
14247: # dimension larger than 80 columns.
14248: # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
14249: # (amiga: removed obsolete :kn#10:,
14250: # also added empty <acsc> to suppress a warning --esr)
14251: amiga|Amiga ANSI,
14252: OTbs, am, bw, xenl,
14253: cols#80, lines#24,
14254: acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
14255: civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
14256: cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
14257: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
14258: cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14259: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
14260: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1.14 millert 14261: indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
14262: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
14263: kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
14264: kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
14265: ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
14266: rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
1.1 millert 14267:
1.11 millert 14268: # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
14269: # (amiga: added empty <acsc> to suppress a warning.
14270: # I'm told this entry screws up badly with AS225, the Amiga
14271: # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
14272: amiga-h|Hans Verkuil's Amiga ANSI,
14273: OTbs, bw, msgr,
14274: cols#80, lines#24,
14275: acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
14276: civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
14277: cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
14278: cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
14279: cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
14280: dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
14281: home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
14282: indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
14283: kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
14284: kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
14285: kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
14286: kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
14287: rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
14288: rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
14289: smso=\2337m, smul=\2334m,
14290:
14291: # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
14292: amiga-8bit|Amiga ANSI using 8-bit controls,
14293: acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
14294: ind=\204, indn@, ri=\215, rin@,
14295: use=amiga-h,
1.1 millert 14296:
1.11 millert 14297: # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
14298: # I'm trying to write a termcap for a commodore b-128, and I'm
14299: # having a little trouble. I've had to map most of my control characters
14300: # to something that unix will accept (my delete-char is a ctrl-t, etc),
14301: # and create some functions (like cm), but thats life.
14302: # The problem is with the arrow keys - right, and up work fine, but
14303: # left deletes the previous character and down I just can't figure out.
14304: # Jove knows what I want, but I don't know what it's sending to me (it
14305: # isn't thats bound to next-line in jove).
14306: # Anybody got any ideas? Here's my termcap.
14307: # DAG -- I changed his "^n" entries to "\n"; see if that works.
1.1 millert 14308: #
1.11 millert 14309: commodore|b-128|Commodore B-128 micro,
14310: am, bw,
14311: OTdN#20, cols#80, lines#24, pb#150,
14312: OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
14313: cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
14314: dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
14315: home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
14316: kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
14317: smir=,
1.1 millert 14318:
1.11 millert 14319: #### North Star
1.1 millert 14320: #
1.11 millert 14321: # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
14322: northstar|North Star Advantage,
14323: OTbs,
14324: cols#80, lines#24,
14325: clear=\004$<200/>,
14326: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
14327: el=\016$<200/>, home=\034\032$<200/>,
1.1 millert 14328:
1.11 millert 14329: #### Osborne
1.1 millert 14330: #
1.11 millert 14331: # Thu Jul 7 03:55:16 1983
14332: #
14333: # As an aside, be careful; it may sound like an anomaly on the
14334: # Osborne, but with the 80-column upgrade, it's too easy to
14335: # enter lines >80 columns!
14336: #
14337: # I've already had several comments...
14338: # The Osborne-1 with the 80-col option is capable of being
14339: # 52, 80, or 104 characters wide; default to 80 for compatibility
14340: # with most systems.
14341: #
14342: # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
14343: osborne-w|osborne1-w|osborne I in 104-column mode,
14344: msgr, ul, xt,
14345: cols#104, lines#24,
14346: bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14347: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14348: dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
14349: kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
14350: # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
14351: osborne|osborne1|osborne I in 80-column mode,
14352: OTbs, am, mir, msgr, ul, xhp,
14353: OTdB#4, cols#80, lines#24,
14354: clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
14355: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14356: dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
14357: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
14358: rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
1.1 millert 14359: #
1.11 millert 14360: # Osborne Executive definition from BRL
14361: # Similar to tvi920
14362: # Added by David Milligan and Tom Smith (SMU)
14363: osexec|Osborne executive,
14364: OTbs, am,
14365: OTug#1, cols#80, lines#24, xmc#1,
14366: OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14367: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14368: dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
14369: is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
14370: kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
14371: kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
14372: kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
14373: smul=\El, tbc=\E3,
1.1 millert 14374:
1.11 millert 14375: #### Console types for obsolete UNIX clones
1.1 millert 14376: #
1.11 millert 14377: # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
14378: # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
14379: # were commercial, Minix an educational tool sold in conjunction with a book.
14380: # Memory-segmentation limits and a strong tendency to look like V7 long after
14381: # it was obsolete made all three pretty lame. Venix croaked early. Coherent
14382: # and Minix were ported to 32-bit Intel boxes, only to be run over by a
14383: # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
14384: # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
14385: # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
14386: # even as single processes under SunOS and the Macintosh OS.
1.1 millert 14387: #
14388:
1.11 millert 14389: # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
14390: minix|minix console (v1.7),
14391: am, xenl,
14392: cols#80, it#8, lines#25,
14393: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
14394: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14395: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14396: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14397: dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
14398: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
14399: is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14400: kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
14401: kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
14402: lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
14403: rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
14404: # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
14405: minix-old|minix console (v1.5),
14406: xon,
14407: cols#80, it#8, lines#25,
14408: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
14409: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14410: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14411: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14412: dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
14413: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
14414: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14415: kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
14416: khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
14417: rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
14418: # The linewrap option can be specified by editing /usr/include/minix/config.h
14419: # before recompiling the minix 1.5 kernel.
14420: minix-old-am|minix console with linewrap,
14421: am, use=minix-old,
1.1 millert 14422:
1.11 millert 14423: pc-minix|minix console on an Intel box,
14424: use=klone+acs, use=minix,
1.1 millert 14425:
1.11 millert 14426: # According to the Coherent 2.3 manual, the PC console is similar
14427: # to a z19. The differences seem to be (1) 25 lines, (2) no status
14428: # line, (3) standout is broken, (4) ins/del line is broken, (5)
14429: # has blinking and bold.
14430: pc-coherent|pcz19|coherent|IBM PC console running Coherent,
14431: am, mir,
14432: cols#80, it#8, lines#25,
14433: bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
14434: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
14435: ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
14436: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
14437: rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
1.1 millert 14438:
1.11 millert 14439: # According to the Venix 1.1 manual, the PC console is similar
14440: # to a DEC vt52. Differences seem to be (1) arrow keys send
14441: # different strings, (2) enhanced standout, (3) added insert/delete line.
14442: # Note in particular that it doesn't have automatic margins.
14443: # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
14444: # not described here because this derives from an old termcap entry.
14445: pc-venix|venix|IBM PC console running Venix,
14446: cols#80, it#8, lines#25,
14447: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1.1 millert 14448: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
1.11 millert 14449: ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
14450: kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
1.1 millert 14451:
1.11 millert 14452: #### Miscellaneous microcomputer consoles
1.1 millert 14453: #
1.11 millert 14454: # If you know anything more about any of these, please tell me.
1.1 millert 14455: #
14456:
1.11 millert 14457: # The MAI Basic Four computer was obsolete at the end of the 1980s.
14458: # It may be used as a terminal by putting it in "line" mode as seen on
14459: # one of the status lines.
14460: # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
14461: # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
14462: # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
14463: # used \ED instead.
14464: # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
14465: mai|basic4|MAI Basic Four in ansi mode,
14466: am, da, db, mir, msgr,
14467: cols#82, it#8, lines#25,
14468: bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
14469: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
14470: cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
14471: dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
14472: if=/usr/lib/tabset/vt100, il1=\E[L, ind=\ED,
14473: is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
14474: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14475: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
14476: kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
14477: rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
14478: smir=\E[4h, smso=\E[7m, smul=\E[4m,
14479: # basis from Peter Harrison, Computer Graphics Lab, San Francisco
14480: # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
1.14 millert 14481: #
14482: # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
14483: # The Basis 108 was a Apple II clone, manufactured by the "Basis
14484: # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
14485: # about 1,5 km from where I live, but doesn't build own computers any
14486: # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
14487: # equipped with one or two 5.25" disk drives, had a monochrome and colour
14488: # video output for a TV set or a dedicated monitor and several slots for
14489: # Apple II cards. Basis 108 were quite popular at german schools before
14490: # the advent of the IBM PC. They run, for example, the UCSD Pascal
14491: # development system (which I used even in 1993 to program the steering
14492: # and data recording for our school's experimental solar panel :), Apple DOS
14493: # or CP/M.
1.11 millert 14494: # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
14495: basis|BASIS108 computer with terminal translation table active,
14496: clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
14497: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
14498: smso=\E(,
14499: use=adm3a,
14500: # luna's BMC terminal emulator
14501: luna|luna68k|LUNA68K Bitmap console,
14502: cols#88, lines#46, use=ansi-mini,
14503: megatek|pegasus workstation terminal emulator,
14504: am, os,
14505: cols#83, lines#60,
14506: # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
14507: # interface (pre-Macintosh by several years) that went nowhere.
14508: xerox820|x820|Xerox 820,
14509: am,
14510: cols#80, lines#24,
14511: bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14512: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
14513: home=^^, ind=^J,
1.1 millert 14514:
1.11 millert 14515: #### Videotex and teletext
1.1 millert 14516: #
1.11 millert 14517:
14518: # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
14519: # \E[?3l 80 columns
14520: # \E[?4l scrolling on
14521: # \E[12h local echo off
14522: # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
14523: # \E)0 G1 DEC set (line graphics)
1.1 millert 14524: #
1.11 millert 14525: # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
14526: m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
14527: OTbs, eslok, hs, xenl,
14528: cols#80, it#8, lines#24, wsl#72, xmc#0,
14529: acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
14530: blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
14531: cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
14532: cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
14533: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14534: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14535: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
14536: home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=^J,
14537: ip=$<7/>, is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
14538: is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
14539: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
14540: kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
14541: kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
14542: kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
14543: mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rin=\EM,
14544: rmacs=^O, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
14545: rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
14546: smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
14547: u6=\E[%i%d;%dR, u7=\E[6n,
1.1 millert 14548:
1.11 millert 14549: # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
14550: #
14551: minitel1|minitel 1,
14552: am, bw, eslok, hs, hz, msgr,
14553: colors#8, cols#40, lines#24, pairs#8,
14554: acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
14555: cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
14556: cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
14557: enacs=^Y, fsl=^J, home=^^, ind=^J,
14558: is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
14559: rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
14560: setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
14561: sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
14562: sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
14563: # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
14564: minitel1b|minitel 1-bistandard (in 40cols mode),
14565: mir,
14566: cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
14567: cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14568: dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
14569: is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
14570: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
14571: kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
14572: smir=\E[4h, smkx=\E;iYA\E;jYC,
14573: use=minitel1,
14574: # <rmkx> posait des problemes (logout en sortant de vi).
14575: minitel1b-80|minitel 1-bistandard (standard teleinformatique),
14576: am@, bw@, hz@,
14577: colors@, cols#80, it#8, pairs@,
14578: blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
14579: clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
14580: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
14581: ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
14582: kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
14583: kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
14584: ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
14585: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
14586: sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m,
14587: use=minitel1b,
1.1 millert 14588:
1.11 millert 14589: ######## OBSOLETE VDT TYPES
1.1 millert 14590: #
1.11 millert 14591: # These terminals are *long* dead -- these entries are retained for
14592: # historical interest only.
14593:
14594: #### Amtek Business Machines
1.1 millert 14595: #
14596:
1.11 millert 14597: # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
14598: # but these caps were commented out in 8.3; also, removed overridden
14599: # ":do=^J:" -- esr)
14600: abm80|amtek business machines 80,
14601: OTbs, am, bw,
14602: cols#80, lines#24,
14603: cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
14604: cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
14605: dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
1.1 millert 14606:
1.11 millert 14607: #### Bell Labs blit terminals
14608: #
14609: # These were AT&T's official entries. The 5620 FAQ maintained by
14610: # David Breneman <daveb@dgtl.com> has this to say:
1.1 millert 14611: #
1.11 millert 14612: # Actually, in the beginning was the Jerq, and the Jerq was white with a
14613: # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
14614: # was good. But lo, upon the horizon loomed a mighty management-type person
14615: # (known now only by the initials VP) who said, the mighty Jerq must stay
14616: # alone, and could not go forth into the world. So Locanthi and Pike put the
14617: # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
14618: # world. And the Jerq lived the rest of its days in research, but never
14619: # strayed from those paths.
1.1 millert 14620: #
1.11 millert 14621: # In all seriousness, the Blit was originally known as the Jerq, but when
14622: # it started to be shown outside of the halls of the Bell Labs Research
14623: # organization, the management powers that be decided that the name could
14624: # not remain. So it was renamed to be Blit. This was in late 1981.
1.1 millert 14625: #
1.11 millert 14626: # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
14627: # 730, and 730+.)
1.1 millert 14628: #
1.11 millert 14629:
14630: blit|jerq|blit running teletype rom,
14631: am, eo, ul, xon,
14632: cols#87, it#8, lines#72,
14633: bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
14634: cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
14635: dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
14636: dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
14637: il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
14638: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
14639:
14640: # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
14641: cbblit|fixterm|blit running columbus code,
14642: cols#88,
14643: ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
14644: rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
14645: smul=\EU",
14646: use=blit,
14647:
14648: oblit|ojerq|first version of blit rom,
14649: am, da, db, eo, mir, ul, xon,
14650: cols#88, it#8, lines#72,
14651: bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
14652: cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
14653: dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
14654: ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
14655: smir=\EQ,
14656:
14657: #### Bolt, Beranek & Newman (bbn)
1.1 millert 14658: #
1.11 millert 14659: # The BitGraph was a product of the now-defunct BBN Computer Corporation.
14660: # The parent company, best known as the architects of the Internet, is
14661: # still around.
1.1 millert 14662: #
1.11 millert 14663: # Jeff DelPapa <dp@world.std.com> writes:
14664: # The bitgraph was a large white box that contained a monochrome bitmap
14665: # display, and a 68000 to run it. You could download code and run it on
14666: # the cpu, it had 128kb (I think) of memory. I used one in the late
14667: # 70's, sure beat a vt100. It had one strange feature tho -- it used
14668: # the cpu to bitblt pixels to scroll, it took longer than the refresh
14669: # rate, and looked like a rubber sheet stretching, then snapping
14670: # upwards. It had everything the early mac had, except a floppy drive a
14671: # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
14672: # Beranek and Neuman) sold at most a few hundred of them to the real
14673: # world. DOD may have bought more...
14674: #
1.1 millert 14675:
1.11 millert 14676: # Entries for the BitGraph terminals. The problem
14677: # with scrolling in vi can only be fixed by getting BBN to put
14678: # smarter scroll logic in the terminal or changing vi or padding
14679: # scrolls with about 500 ms delay.
14680: #
14681: # I always thought the problem was related to the terminal
14682: # counting newlines in its input buffer before scrolling and
14683: # then moving the screen that much. Then vi comes along and
14684: # paints lines in on the bottom line of the screen, so you get
14685: # this big white gap.
14686:
14687: bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
14688: flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
14689: use=bg2.0,
14690: bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
14691: flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
14692: use=bg2.0,
14693: bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
14694: OTbs, xenl,
14695: cols#85, lines#64,
14696: bel=^G, clear=\E[H\E[J$<150>, cr=^M,
14697: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
14698: cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
14699: ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
14700: ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14701: kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
14702: lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
14703: sgr0=\E[m, smkx=\E=, smso=\E[7m,
14704:
14705: bg1.25rv|bbn bitgraph 1.25 (reverse video),
14706: flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, use=bg1.25,
14707: bg1.25nv|bbn bitgraph 1.25 (normal video),
14708: flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, use=bg1.25,
14709: # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
14710: bg1.25|bbn bitgraph 1.25,
14711: cols#85, lines#64,
14712: bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
14713: cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
14714: dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
14715: il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
14716: kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
14717: lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
14718: rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
14719: smso=\E[7m,
14720:
1.14 millert 14721: #### Bull (bq, dku, vip)
14722: #
14723: # (Adapted for terminfo; AIX extension capabilities translated -- esr)
14724:
14725: #============================================#
14726: # BULL QUESTAR 210 `SDP' terminals emulation #
14727: #============================================#
14728: #
14729: # Description written by R.K.Saunders (Bull Transac)
14730: #
14731: # Modifications written by F. Girard (Bull MTS)
14732: # 19-05-87 V02.00.01
14733: # 17-12-87 V02.00.02
14734: # 15-09-89 V02.00.05
14735: #
14736: # Typical technical selections F1 (modes SDP/ROLL):
14737: # -------------------------------------------------------
14738: # | 01 02 03 04 05 06 07 08 09 10 |
14739: # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
14740: # | |
14741: # | 11 12 13 14 15 16 17 18 19 20 |
14742: # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
14743: # | |
14744: # | 21 22 23 24 25 26 27 28 29 30 |
14745: # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
14746: # | |
14747: # | 31 32 33 34 35 36 37 38 39 40 |
14748: # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
14749: # -------------------------------------------------------
14750: # Typical firmware identification F5 "etat 6":
14751: # P287.02.04b (AZERTY)
14752: # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
14753: # P298.03.03 (monochrome) or P374.03.02 (colour)
14754: #
14755: # SM SDP mode (VIP command): ^[[?=h
14756: # RIS (erases screen): ^[c
14757: # DMI disable keyboard: ^[`
14758: # SM double rendition mode: ^[[?>h
14759: # RM solicited status mode: ^[[5l
14760: # RM character mode: ^[[>l
14761: # RM echoplex mode: ^[[12l
14762: # RM column tab mode: ^[[18l
14763: # RM forbid SS2 keyboard mode: ^[[?<l
14764: # SM scroll mode: ^[[=h
14765: # FCF enable XON/XOFF: ^[P1s^[\
14766: # MTL select end msg character: ^[[^Wp
14767: # EMI enable keyboard: ^[b
14768: # RIS retour etat initial: ^[c
14769: # enable FC keypad: ^[[?<h,
14770: # MPW map status line window: ^[PY99:98^[\
14771: # SCP select status line: ^[[0;98v
14772: # ED erase entire partition: ^[[2J
14773: # SCP select main partition: ^[[v
14774: # SM character insertion mode: ^[[4h
14775: # RM character replacement mode: ^[[4l
14776: # COO cursor on: ^[[r
14777: # COO cursor off: ^[[1r
14778: # SGR dim (turquoise) rev attr: ^[[2;7m
14779: # SGR Data normal attr: ^[[m
14780: # SO Line-graphic mode ON: ^N
14781: # SI Line-graphic mode OFF: ^O
14782: # MC start routing to printer: ^[[5i
14783: # MC stop routing to printer: ^M^[[4i
14784: #
14785:
14786: # This entry covers the following terminals:
14787: # dku7102, tws2102, and tws models 2105 to 2112
14788: tws-generic|dku7102|Bull Questar tws terminals,
14789: am, eslok, hs, mir, msgr, xenl, xhp@, xon,
14790: cols#80, it#8, lines#24, wsl#80,
14791: acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
14792: bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
14793: cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
14794: cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
14795: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14796: dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
14797: dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
14798: fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
14799: il1=\E[L, ind=^J, invis=\E[0;8m,
14800: is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
14801: is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
14802: is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
14803: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
14804: ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
14805: kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
14806: kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
14807: khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
14808: mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
14809: rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
14810: rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
14811: sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14812: sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
14813: smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g,
14814: tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
14815: tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
14816: dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
14817: use=tws-generic,
14818: tws2103|xdku|BULL Questar tws2103,
14819: ht=^I, use=tws-generic,
14820: tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
14821: ht=^I,
14822: use=tws2102-sna,
14823: dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
14824: clear=\E[2J\E[H, cup@, dl@, dl1@,
14825: dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
14826: il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
14827: use=tws-generic,
14828: dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
14829: blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
14830: smso=\E[0;4;5;7m, smul=\E[0;2m,
14831: use=tws-generic,
14832:
14833: #=========================================================#
14834: # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
14835: #=========================================================#
14836: #
14837: # Description written by J. Staerck (BULL SA)
14838: # Copyright (c) 1989 BULL SA
14839: #---------------------------------------------------------------------------
14840: # This entry is used for terminals with vt320 emulation mode
14841: # and following set-up :
14842: # 8 bit ISO Latin Character Set (ISO 8859-1),
14843: # 7 bit Control Characters,
14844: # 80 columns screen.
14845: # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
14846: # They are used in string capabilities with vt220-320 emulation mode.
14847: # In the following DEC definitions, two kinds of terminfo databases are
14848: # provided :
14849: # 1. the first with Command Sequence Introducer starting with escape
14850: # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
14851: # 2. the second with Command Sequence Introducer starting with escape
14852: # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
14853: # Soft Terminal Reset esc [ ! p
14854: # RIS (erases screen): esc c
14855: # DECKPNM numeric keypad mode: esc >
14856: # DECKPAM applic. keypad mode: esc =
14857: # DECSTBM Scrolling region: esc [ r
14858: # SCS select G0 = US: esc ( B
14859: # SCS select G1 = line-graphic: esc ) 0
14860: # Select 7-bit C1 controls: esc sp F
14861: # Select 8-bit C1 controls: esc sp G
14862: # Select cursor home: esc [ H
14863: # Select erase screen: esc [ J
14864: # SM KAM lock keyboard: esc [ 2 h
14865: # RM KAM unlock keyboard: esc [ 2 l
14866: # SM SRM local echo off: esc [ 1 2 h
14867: # RM SRM local echo on: esc [ 1 2 l
14868: # SM LNM New line : esc [ 2 0 h
14869: # RM LNM return = CR only: esc [ 2 0 l
14870: # SM DECCKM cursor keys mode: esc [ ? 1 h
14871: # RM DECCKM appli. keys mode: esc [ ? 1 l
14872: # SM DECANM ANSI mode on: esc [ ? 2 h
14873: # RM DECANM ANSI mode off: esc [ ? 2 l
14874: # SM DECCOLM 132-column screen: esc [ ? 3 h
14875: # RM DECCOLM 80-column screen: esc [ ? 3 l
14876: # SM DECSCLM Smooth scroll: esc [ ? 4 h
14877: # RM DECSCLM Jump scroll: esc [ ? 4 l
14878: # SM DECSCNM screen light backgr. esc [ ? 5 h
14879: # RM DECSCNM screen dark backgr. esc [ ? 5 l
14880: # SM DECOM move within margins: esc [ ? 6 h
14881: # RM DECOM move outside margins: esc [ ? 6 l
14882: # SM DECAWM auto right margin: esc [ ? 7 h
14883: # RM DECAWM auto right margin: esc [ ? 7 l
14884: # SM DECARM auto repeat: esc [ ? 8 h
14885: # RM DECARM auto repeat: esc [ ? 8 l
14886: # DECSASD Select active main: esc [ 0 $ }
14887: # DECSASD Select active status: esc [ 1 $ }
14888: # DECSSDT Select status none: esc [ 0 $ ~
14889: # DECSSDT Select status indic.: esc [ 1 $ ~
14890: # DECSSDT Select status host-wr: esc [ 2 $ ~
14891: # SM DECTCEM Visible cursor: esc [ ? 2 5 h
14892: # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
14893: # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
14894: # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
14895: # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
14896: # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
14897: # SM DECKBUM clavier informatique esc [ ? 6 8 h
14898: # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
14899: # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
14900: # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
14901: # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
14902: # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
14903: # Char. and Line attributes: esc [ Ps ... Ps m
14904: # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
14905: # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
14906: #
14907:
14908: # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
14909: bq300|Bull vt320 ISO Latin 1 80 columns terminal,
14910: am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
14911: cols#80, it#8, lines#24, vt#3, wsl#80,
14912: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14913: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
14914: clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
14915: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14916: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14917: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14918: cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14919: dl1=\E[M, dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX,
14920: ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
14921: flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
14922: hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14923: is1=\E[63;1"p\E[2h,
14924: is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
14925: is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
14926: kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
14927: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
14928: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
14929: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
14930: kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
14931: kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
14932: khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
14933: krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
14934: mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
14935: ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
14936: rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
14937: rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
14938: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
14939: sgr0=\E[0m\E(B, smacs=^N, smam=\E[?7h,
14940: smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
14941: smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
14942: bg300-rv|Bull vt320 reverse 80 columns,
14943: flash=\E[?5l$<50>\E[?5h,
14944: is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, use=bq300,
14945: bq300-w|Bull vt320 132 columns,
14946: cols#132, wsl#132,
14947: is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
14948: rs2=\E[?3h,
14949: use=bq300,
14950: bq300-w-rv|Bull vt320 reverse mode 132 columns,
14951: cols#132, wsl#132,
14952: flash=\E[?5l$<50>\E[?5h,
14953: is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
14954: rs2=\E[?3h,
14955: use=bq300,
14956:
14957: # This entry is used for terminals with vt320 emulation mode
14958: # and following set-up :
14959: # 8 bit ISO Latin Character Set (ISO 8859-1),
14960: # 8 bit Control Characters, (CSI coded as x9B for ESC [)
14961: # 80 columns screen.
14962: # Soft Terminal Reset csi ! p
14963: # RIS (erases screen): esc c
14964: # DECKPNM numeric keypad mode: esc >
14965: # DECKPAM applic. keypad mode: esc =
14966: # DECSTBM Scrolling region: esc [ r
14967: # SCS select G0 = US: esc ( B
14968: # SCS select G1 = line-graphic: esc ) 0
14969: # Select 7-bit C1 controls: esc sp F
14970: # Select 8-bit C1 controls: esc sp G
14971: # Select cursor home: csi H
14972: # Select erase screen: csi J
14973: # SM KAM lock keyboard: csi 2 h
14974: # RM KAM unlock keyboard: csi 2 l
14975: # SM SRM local echo off: csi 1 2 h
14976: # RM SRM local echo on: csi 1 2 l
14977: # SM LNM New line : csi 2 0 h
14978: # RM LNM return = CR only: csi 2 0 l
14979: # SM DECCKM cursor keys mode: csi ? 1 h
14980: # RM DECCKM appli. keys mode: csi ? 1 l
14981: # SM DECANM ANSI mode on: csi ? 2 h
14982: # RM DECANM ANSI mode off: csi ? 2 l
14983: # SM DECCOLM 132-column screen: csi ? 3 h
14984: # RM DECCOLM 80-column screen: csi ? 3 l
14985: # SM DECSCLM Smooth scroll: csi ? 4 h
14986: # RM DECSCLM Jump scroll: csi ? 4 l
14987: # SM DECSCNM screen light backgr. csi ? 5 h
14988: # RM DECSCNM screen dark backgr. csi ? 5 l
14989: # SM DECOM move within margins: csi ? 6 h
14990: # RM DECOM move outside margins: csi ? 6 l
14991: # SM DECAWM auto right margin: csi ? 7 h
14992: # RM DECAWM auto right margin: csi ? 7 l
14993: # SM DECARM auto repeat: csi ? 8 h
14994: # RM DECARM auto repeat: csi ? 8 l
14995: # DECSASD Select active main: csi 0 $ }
14996: # DECSASD Select active status: csi 1 $ }
14997: # DECSSDT Select status none: csi 0 $ ~
14998: # DECSSDT Select status indic.: csi 1 $ ~
14999: # DECSSDT Select status host-wr: csi 2 $ ~
15000: # SM DECTCEM Visible cursor: csi ? 2 5 h
15001: # RM DECTCEM Invisible cursor: csi ? 2 5 l
15002: # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
15003: # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
15004: # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
15005: # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
15006: # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
15007: # Char. and Line attributes: csi Ps ... Ps m
15008: # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
15009: # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
15010: # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
15011: bq300-8|Bull vt320 full 8 bits 80 columns,
15012: am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
15013: cols#80, it#8, lines#24, vt#3, wsl#80,
15014: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15015: bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
15016: clear=\233H\233J, cnorm=\233?25h, cr=^M,
15017: csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
15018: cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
15019: cvvis=\233?25h, dch=\233%p1%dP, dch1=\233P,
15020: dl=\233%p1%dM, dsl=\2331$}\2332$~\n\2330$},
15021: ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
15022: enacs=\E(B\E)0, flash=\233?5h$<50>\233?5l, fsl=\2330$},
15023: home=\233H, ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL,
15024: ind=\ED, is1=\E[63;2"p\E[2h,
15025: is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
15026: is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
15027: ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
15028: kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
15029: kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
15030: kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
15031: kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
15032: kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
15033: kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
15034: khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
15035: krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
15036: lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
15037: rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
15038: rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
15039: rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
15040: sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
15041: sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
15042: smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
15043: smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
15044: bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
15045: flash=\233?5l$<50>\233?5h,
15046: is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, use=bq300-8,
15047: bq300-8w|Bull vt320 8-bit 132 columns,
15048: cols#132, wsl#132,
15049: is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
15050: rs2=\233?3h,
15051: use=bq300-8,
15052: bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
15053: cols#132, wsl#132,
15054: flash=\233?5l$<50>\233?5h,
15055: is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
15056: rs2=\233?3h,
15057: use=bq300-8,
15058:
15059: # This entry is used for terminals with vt320 emulation mode
15060: # a 102 keys keyboard (PC scancode !) and following set-up :
15061: # 8 bit ISO Latin Character Set (ISO 8859-1),
15062: # 7 bit Control Characters,
15063: # 80 columns screen.
15064: bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
15065: kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
15066: kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
15067: kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
15068: kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
15069: kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15070: krdo@, kslt@, lf1@, lf2@, lf3@, lf4@,
15071: use=bq300,
15072: bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
15073: flash=\E[?5l$<50>\E[?5h,
15074: is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, use=bq300-pc,
15075: bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
15076: cols#132, wsl#132,
15077: is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
15078: rs2=\E[?3h,
15079: use=bq300-pc,
15080: bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
15081: cols#132, wsl#132,
15082: flash=\E[?5l$<50>\E[?5h,
15083: is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
15084: rs2=\E[?3h,
15085: use=bq300-pc,
15086: # 8 bit ISO Latin Character Set (ISO 8859-1),
15087: # 8 bit Control Characters,
15088: # 80 columns screen.
15089: bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
15090: kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
15091: kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
15092: kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
15093: kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
15094: kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
15095: khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
15096: kslt@, lf1@, lf2@, lf3@, lf4@,
15097: use=bq300-8,
15098: bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
15099: flash=\E[?5l$<50>\E[?5h,
15100: is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, use=bq300-8-pc,
15101: bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
15102: cols#132, wsl#132,
15103: is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
15104: rs2=\E[?3h,
15105: use=bq300-8-pc,
15106: bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
15107: cols#132, wsl#132,
15108: flash=\E[?5l$<50>\E[?5h,
15109: is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
15110: rs2=\E[?3h,
15111: use=bq300-8-pc,
15112:
15113: #======================================================#
15114: # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
15115: #======================================================#
15116:
15117: # normal mode, 8 bits, 80 columns terminal.
15118: # RES reset : ^[e
15119: # RIS reset initial state: ^[c
15120: # BLE bell enable ^[h
15121: # BLD bell disable ^[g
15122: # CAMS char. attr. mode set ^[[D
15123: # CAMR char. attr. mode reset ^[[G
15124: # CLR clear ^[`
15125: # KBU keyboard unlock (set) ^[[W
15126: # KBL keyboard lock (reset) ^[[X
15127: # CM character mode (async.) ^[k
15128: # NEP non echoplex mode (by host) ^[l
15129: # EP echoplex mode (by host) ^[m
15130: # IM insert mode set ^[[I
15131: # IM insert mode reset ^[[J
15132: # RMS roll mode set ^[r
15133: # RMR roll mode reset ^[q
15134: # SM78 set mode vip7800 ^[[1q
15135: # SD scroll up (72 lines) ^[[0s
15136: # SD scroll down (72 lines) ^[[1s
15137: # RBM block mode reset ^[[E
15138: # SLS status line set ^[w
15139: # SLR status line reset ^[v
15140: # SLL status line lock ^[O
15141: # LGS Line-graphic mode set ^[G
15142: # LGR Line-graphic mode reset ^[F
15143: # TBC tab clear (at cursor pos.) ^[[g
15144: # TBI tab initialize ^[[N
15145: # TBS tab set (at cursor pos.) ^[p
15146: # PDS print data space ^[[0p
15147: # PHD print host data ^[[3p
15148: # PDT print data terminator ^[[<p
15149: # PRES print adapter reset ^[[2p
15150: # SSPR multi-part. reset ^[[<>u
15151: # SSP0 partition 0 set ^[[00u
15152: # SSP1 partition n format 1 ^[[PnPnSTRINGu
15153: # SSP2 partition n format 2 ^[[PnPnSTRINGu
15154: # SSP3 partition n format 3 ^[[PnPnu
15155: # ATR attribute (visual)
15156: # blink : ^[sB
15157: # dim : ^[sL
15158: # hide (blank) : ^[sH
15159: # restore : ^[sR
15160: # inverse video : ^[sI
15161: # prot. : ^[sP
15162: # underline : ^[s_
15163: # reset : ^{
15164: #
15165: # This covers the vip7800 and BQ3155-vip7800
15166: vip|Bull Questar 3155-7800,
15167: am, eslok, hs, km, mc5i, msgr, xenl, xon,
15168: cols#80, it#8, lines#24, vt#3, wsl#80,
15169: acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
15170: cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15171: cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
15172: dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
15173: flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
15174: hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
15175: is2=\E[00u\E[<>001001024080024080u\E[01u,
15176: is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
15177: kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
15178: kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
15179: kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
15180: kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
15181: kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
15182: kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
15183: kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
15184: khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
15185: kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
15186: lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
15187: mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
15188: ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
15189: rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
15190: sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
15191: smul=\Es_, tbc=\E[N, tsl=\Ew,
15192: # normal screen, 8 bits, 132 columns terminal.
15193: vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
15194: cols#132, wsl#132,
15195: is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
15196: vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
15197: lines#72,
15198: is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
15199: vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
15200: cols#132, lines#72, wsl#132,
15201: is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
15202:
1.11 millert 15203: #### Chromatics
1.1 millert 15204: #
15205:
1.11 millert 15206: # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
15207: # that is smaller than the screen, and puts up a warning message
15208: # outside the window. Te erases the warning message, puts the
15209: # window back to be the whole screen, and puts the cursor at just
15210: # below the small window. I defined <cnorm> and <civis> to really turn
15211: # the cursor on and off, but I have taken this out since I don't
15212: # like the cursor being turned off when vi exits.
15213: cg7900|chromatics|chromatics 7900,
15214: am,
15215: cols#80, lines#40,
15216: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
15217: cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
15218: ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
15219: rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
15220: rmso=\001C1\,\001c2\,,
15221: smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
15222: smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
15223:
15224: #### Computer Automation
1.1 millert 15225: #
1.11 millert 15226:
15227: ca22851|computer automation 22851,
15228: am,
15229: cols#80, lines#24,
15230: bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
15231: cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
15232: kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
15233:
15234: #### Cybernex
1.1 millert 15235: #
15236:
1.11 millert 15237: # This entry has correct padding and the undocumented "ri" capability
15238: cyb83|xl83|cybernex xl-83,
15239: OTbs, am,
15240: cols#80, lines#24,
15241: bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
15242: cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
15243: ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
15244: kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
15245: # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
15246: cyb110|mdl110|cybernex mdl-110,
15247: OTbs, am,
15248: cols#80, lines#24,
15249: bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
15250: cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
15251: dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
15252: ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
15253: ht=\011$<43>, ich1=\016A\035$<3.5>,
15254: il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
1.1 millert 15255:
1.11 millert 15256: #### Datapoint
15257: #
15258: # Datapoint is gone. They used to be headquartered in Texas.
15259: # They created ARCnet, an Ethernet competitor that flourished for a while
15260: # in the early 1980s before 3COM got wise and cut its prices. The service
15261: # side of Datapoint still lives (1995) in the form of Intelogic Trace.
1.1 millert 15262: #
15263:
1.11 millert 15264: dp3360|datapoint|datapoint 3360,
15265: OTbs, am,
15266: cols#82, lines#25,
15267: bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
15268: ed=^_, el=^^, home=^], ind=^J,
15269:
15270: # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
15271: # The Datapoint 8242 Workstation was sold at least between 1985
15272: # and 1989. To make the terminal work with this entry, press
15273: # CONTROL-INT-INT to take the terminal off-line, and type (opt).
15274: # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
15275: # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
15276: # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
15277: # fact unusable because the strings sent by the terminal conflict
15278: # with other keys).
15279: # The terminal is capable of displaying "box draw" characters.
15280: # For each graphic character you must send 2 ESC's (\E\E) followed
15281: # by a control character as follows:
15282: # character meaning
15283: # ========= =======
15284: # ctrl-E top tee
15285: # ctrl-F right tee
15286: # ctrl-G bottom tee
15287: # ctrl-H left tee
15288: # ctrl-I cross
15289: # ctrl-J top left corner
15290: # ctrl-K top right corner
15291: # ctrl-L bottom left corner
15292: # ctrl-M bottom right corner
15293: # ctrl-N horizontal line
15294: # ctrl-O vertical line
15295: # Unfortunately this cannot be fitted into the termcap/terminfo
15296: # description scheme.
15297: dp8242|datapoint 8242,
15298: msgr,
15299: cols#80, lines#25,
15300: bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
15301: cr=^M, cub1=^H, cud1=^J,
15302: cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
15303: home=^U, ht=^I, il1=\E^T, ind=^C,
15304: is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
15305: kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
15306: kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
15307: kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
15308: rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
15309: rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
15310: smso=\E^E, smul=\E^F,
15311: wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
1.1 millert 15312:
1.11 millert 15313: #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
15314: #
15315: # These entries are DEC's official terminfos for its older terminals.
15316: # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
15317: # Engineering for more information. Updated terminfos and termcaps
15318: # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
1.1 millert 15319: #
15320:
1.11 millert 15321: gt40|dec gt40,
15322: OTbs, os,
15323: cols#72, lines#30,
15324: bel=^G, cr=^M, cub1=^H, cud1=^J,
15325: gt42|dec gt42,
15326: OTbs, os,
15327: cols#72, lines#40,
15328: bel=^G, cr=^M, cub1=^H, cud1=^J,
15329: vt50|dec vt50,
15330: OTbs,
15331: cols#80, lines#12,
15332: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15333: cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
15334: vt50h|dec vt50h,
15335: OTbs,
15336: cols#80, lines#12,
15337: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15338: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15339: el=\EK, ht=^I, ind=^J, ri=\EI,
15340: # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
15341: vt61|vt-61|vt61.5|dec vt61,
1.1 millert 15342: cols#80, lines#24,
1.11 millert 15343: bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
15344: cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
15345: cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
15346: ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15347: ri=\E$<20>I,
15348:
15349: # The gigi does standout with red!
15350: # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
15351: gigi|vk100|dec gigi graphics terminal,
15352: OTbs, am, xenl,
15353: cols#84, lines#24,
15354: bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
15355: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
15356: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
15357: el=\E[K, ht=^I, ind=^J,
15358: is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
15359: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
15360: kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
15361: rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15362: sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
15363: smul=\E[4m,
15364:
15365: # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
15366: # a PC differentiated from the IBM clones. It was a total, ludicrous,
15367: # grossly-overpriced failure (among other things, DEC's OS didn't include
15368: # a format program, so you had to buy pre-formatted floppies from DEC at
15369: # a hefty premium!).
15370: pro350|decpro|dec pro console,
15371: OTbs,
15372: cols#80, it#8, lines#24,
15373: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15374: clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
15375: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15376: el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
15377: kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
15378: kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
15379: rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
1.1 millert 15380:
1.11 millert 15381: dw1|decwriter I,
15382: OTbs, hc, os,
15383: cols#72,
15384: bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
15385: dw2|decwriter|dw|decwriter II,
15386: OTbs, hc, os,
15387: cols#132,
15388: bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
15389: # \E(B Use U.S. character set (otherwise # => british pound !)
15390: # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
15391: # \E[w 10 char/in pitch
15392: # \E[1;132 full width horizontal margins
15393: # \E[2g clear all tab stops
15394: # \E[z 6 lines/in
15395: # \E[66t 66 lines/page (for \f)
15396: # \E[1;66r full vertical page can be printed
15397: # \E[4g clear vertical tab stops
15398: # \E> disable alternate keypad mode (so it transmits numbers!)
15399: # \E[%i%p1%du set tab stop at column %d (origin == 1)
15400: # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
15401: # a tab stop)
1.1 millert 15402: #
1.11 millert 15403: # The dw3 does standout with wide characters.
1.1 millert 15404: #
1.11 millert 15405: dw3|la120|decwriter III,
15406: OTbs, hc, os,
15407: cols#132,
15408: bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
15409: is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
15410: is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
15411: kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
15412: dw4|decwriter IV,
15413: OTbs, am, hc, os,
15414: cols#132,
15415: bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
15416: kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
1.1 millert 15417:
1.11 millert 15418: # These aren't official
15419: ln03|dec ln03 laser printer,
15420: hc,
15421: cols#80, lines#66,
15422: bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
15423: rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
15424: smul=\E[4m,
15425: ln03-w|dec ln03 laser printer 132 cols,
15426: cols#132,
15427: bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
15428: kcud1=^J, nel=^M^J,
15429: use=ln03,
1.1 millert 15430:
1.11 millert 15431: #### Delta Data (dd)
1.1 millert 15432: #
15433:
1.11 millert 15434: # Untested. The cup sequence is hairy enough that it probably needs work.
15435: # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
15436: # There are BSD-derived termcap entries floating around for this puppy
15437: # that are *certainly* wrong.
15438: delta|dd5000|delta data 5000,
15439: OTbs, am,
15440: cols#80, lines#27,
15441: bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
15442: cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
15443: cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
15444:
15445: #### Digital Data Research (ddr)
15446: #
1.1 millert 15447:
1.11 millert 15448: # (ddr: I added <rmam>/<smam> based on the init string -- esr)
15449: ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
15450: OTbs, am, xenl,
15451: cols#80, it#8, lines#24, vt#3,
15452: blink=\E[5m$<2/>, bold=\E[1m$<2/>,
15453: clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
15454: cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
15455: cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
15456: ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
15457: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
15458: kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
15459: rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
15460: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
15461: rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15462: sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
15463: smul=\E[4m$<2/>,
1.1 millert 15464:
1.11 millert 15465: #### Evans & Sutherland
1.1 millert 15466: #
15467:
1.11 millert 15468: # Jon Leech <leech@cs.unc.edu> tells us:
15469: # The ps300 was the Evans & Sutherland Picture System 300, a high
15470: # performance 3D vector graphics system with a bunch of specialized hardware.
15471: # Approximate date of release was 1982 (early 80s, anyway), and it had several
15472: # evolutions including (limited) color versions such as the PS330C. PS300s
15473: # were effectively obsolete by the late 80s, replaced by raster graphics
15474: # systems, although specialized applications like molecular modelling
15475: # hung onto them for a while longer. AFAIK all E&S vector graphics systems
15476: # are out of production, though of course E&S is very much alive (in 1996).
15477: # (ps300: changed ":pt@:" to "it@" -- esr)
15478: #
15479: ps300|Picture System 300,
15480: xt,
15481: it@,
15482: rmso@, rmul@, smso@, smul@, use=vt100,
1.1 millert 15483:
1.11 millert 15484: #### General Electric (ge)
1.1 millert 15485: #
15486:
1.11 millert 15487: terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
15488: OTbs, hc, os,
15489: cols#120,
15490: bel=^G, cr=^M, cud1=^J, ind=^J,
1.1 millert 15491:
1.11 millert 15492: #### Heathkit/Zenith
1.1 millert 15493: #
1.11 millert 15494:
15495: # Here is a description of the H19 DIP switches:
1.1 millert 15496: #
1.11 millert 15497: # S401
15498: # 0-3 = baud rate as follows:
15499: #
15500: # 3 2 1 0
15501: # --- --- --- ---
15502: # 0 0 1 1 300 baud
15503: # 0 1 0 1 1200 baud
15504: # 1 0 0 0 2400 baud
15505: # 1 0 1 0 4800 baud
15506: # 1 1 0 0 9600 baud
15507: # 1 1 0 1 19.2K baud
1.1 millert 15508: #
1.11 millert 15509: # 4 = parity (0 = no parity)
15510: # 5 = even parity (0 = odd parity)
15511: # 6 = stick parity (0 = normal parity)
15512: # 7 = full duplex (0 = half duplex)
1.1 millert 15513: #
1.11 millert 15514: # S402
15515: # 0 = block cursor (0 = underscore cursor)
15516: # 1 = no key click (0 = keyclick)
15517: # 2 = wrap at end of line (0 = no wrap)
15518: # 3 = auto LF on CR (0 = no LF on CR)
15519: # 4 = auto CR on LF (0 = no CR on LF)
15520: # 5 = ANSI mode (0 = VT52 mode)
15521: # 6 = keypad shifted (0 = keypad unshifted)
15522: # 7 = 50Hz refresh (1 = 60Hz refresh)
1.1 millert 15523: #
1.11 millert 15524: # Factory Default settings are as follows:
15525: # 7 6 5 4 3 2 1 0
15526: # S401 1 0 0 0 1 1 0 0
15527: # S402 0 0 0 0 0 0 0 0
15528: # (h19: I added <rmam>/<smam> based on the init string;
15529: # also added empty <acsc> to suppress a tic warning -- esr)
15530: h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
15531: OTbs, am, mir, msgr,
15532: cols#80, it#8, lines#24,
15533: acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
15534: cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
15535: cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
15536: ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
15537: is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
15538: kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
15539: kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
15540: kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
15541: ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
15542: smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
15543: h19-bs|heathkit w/keypad shifted,
15544: rmkx=\Eu, smkx=\Et, use=h19-b,
15545: h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
15546: rmkx=\Eu, smkx=\Et,
15547: use=h19-u,
15548: # (h19: merged in <ip> from BSDI hp19-e entry>;
15549: # also added empty <acsc> to suppress a tic warning --esr)
15550: # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
15551: # Tim tells us that:
15552: # I have an old Zenith-19 terminal at home that still gets a lot of use.
15553: # This terminal suffers from the same famous insert-mode padding lossage
15554: # that has been acknowledged for the Z29 terminal. Emacs is nearly
15555: # unusable on this box, since even a half-scroll up or down the window
15556: # causes flaming terminal death.
15557: #
15558: # On the Z19, the only way I have found around this problem is to remove
15559: # the :al: and :dl: entries entirely. No amount of extra padding will
15560: # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
15561: # makes Emacs a little slower, but it remains in the land of the living.
15562: # Big win.
15563: h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
15564: OTbs, am, eslok, hs, mir, msgr,
15565: cols#80, it#8, lines#24,
15566: acsc=, bel=^G, clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB,
15567: cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
15568: cvvis=\Ex4, dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH,
15569: ht=^I, ind=^J, ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB,
15570: kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
15571: kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue,
15572: lf7=red, lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq,
15573: smacs=\EF, smir=\E@, smso=\Ep,
15574: tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
15575: h19-u|heathkit with underscore cursor,
15576: cnorm@, cvvis@, use=h19-b,
15577: h19-g|h19g|heathkit w/block cursor,
15578: cnorm=\Ex4, use=h19-b,
15579: alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
15580: lines#60,
15581: dl1=\EM, il1=\EL, use=h19,
1.1 millert 15582:
1.11 millert 15583: # The major problem with the Z29 is that it requires more padding than the Z19.
1.1 millert 15584: #
1.11 millert 15585: # The problem with declaring an H19 to be synonymous with a Z29 is that
15586: # it needs more padding. It especially loses if a program attempts
15587: # to put the Z29 into insert mode and insert text at 9600 baud. It
15588: # even loses worse if the program attempts to insert tabs at 9600
15589: # baud. Adding padding to text that is inserted loses because in
15590: # order to make the Z29 not die, one must add so much padding that
15591: # whenever the program tries to use insert mode, the effective
15592: # rate is about 110 baud.
15593: #
15594: # What program would want to put the terminal into insert mode
15595: # and shove stuff at it at 9600 baud you ask?
15596: #
15597: # Emacs. Emacs seems to want to do the mathematically optimal
15598: # thing in doing a redisplay rather than the practical thing.
15599: # When it is about to output a line on top of a line that is
15600: # already on the screen, instead of just killing to the end of
15601: # the line and outputting the new line, it compares the old line
15602: # and the new line and if there are any similarities, it
15603: # constructs the new line by deleting the text on the old line
15604: # on the terminal that is already there and then inserting new
15605: # text into the line to transform it into the new line that is
15606: # to be displayed. The Z29 does not react kindly to this.
15607: #
15608: # But don't cry for too long.... There is a solution. You can make
15609: # a termcap entry for the Z29 that says the Z29 has no insert mode.
15610: # Then Emacs cannot use it. "Oh, no, but now inserting into a
15611: # line will be really slow", you say. Well there is a sort of a
15612: # solution to that too. There is an insert character option on
15613: # the Z29 that will insert one character. Unfortunately, it
15614: # involves putting the terminal into ansi mode, inserting the
15615: # character, and changing it back to H19 mode. All this takes 12
15616: # characters. Pretty expensive to insert one character, but it
15617: # works. Either Emacs doesn't try to use its inserting hack when
15618: # it's only given an insert character ability or the Z29 doesn't
15619: # require padding with this (the former is probably more likely,
15620: # but I haven't checked it out).
15621: # (z29: added empty <acsc> to suppress a tic warning, merged in
15622: # status line capabilities from BRL entry --esr)
15623: z29|zenith29|z29b|zenith z29b,
15624: OTbs, OTpt, am, eslok, hs, mir, msgr,
15625: OTkn#10, cols#80, lines#24,
15626: OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
15627: cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
15628: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
15629: cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
15630: ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
15631: ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
15632: is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
15633: kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
15634: kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
15635: lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
15636: rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
15637: tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
15638: # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
15639: # the world is stable. <rs1> causes the terminal to be reset to the state
15640: # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
15641: # cursor, bc -> block cursor.
15642: # From: Mike Meyers
15643: # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
15644: # looks vt100-compatible -- esr)
15645: z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
15646: OTbs, OTpt, am, eslok, hs, mir, msgr,
15647: OTkn#10, cols#80, it#8, lines#24,
15648: OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
15649: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15650: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
15651: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15652: dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
15653: dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
15654: ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
15655: ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
15656: kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
15657: kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
15658: kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
15659: nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
15660: rmso=\E[m, rmul=\E[m,
15661: rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
15662: sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
15663: tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
15664: z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
15665: rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
15666: use=z29a,
15667: z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
15668: rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
15669: use=z29a,
15670: z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
15671: rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
15672: use=z29a,
15673: # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
15674: z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
15675: am, eslok, hs, mc5i, mir, msgr, xon,
15676: cols#80, lines#24,
15677: acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15678: blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
15679: clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
15680: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15681: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15682: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15683: dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
15684: dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
15685: fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
15686: ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
15687: ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
15688: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
15689: kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
15690: kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
15691: mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
15692: rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
15693: rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
15694: smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15695: tsl=\E[s\E[>1h\E[25;%i%p1%dH,
1.1 millert 15696:
1.11 millert 15697: # From: Brad Brahms <Brahms@USC-ECLC>
15698: z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
15699: cnorm=\Ey4\Em70, cvvis=\Ex4\Em71,
15700: use=z100bw,
15701: # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
15702: z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
15703: OTbs, OTpt, mir, msgr,
15704: OTkn#10, cols#80, it#8, lines#24,
15705: acsc=, clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB,
15706: cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>,
15707: cuu1=\EA, cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>,
15708: ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H,
15709: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES,
15710: kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
15711: kf9=\EOI, khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq,
15712: smacs=\EF, smir=\E@, smso=\Ep,
15713: p19|h19-b with il1/dl1,
15714: dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
15715: # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
15716: # (ztx: removed duplicate :sr: -- esr)
15717: ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
15718: OTbs, am, eslok, hs,
15719: cols#80, it#8, lines#24,
15720: clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
15721: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
15722: dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
15723: il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
15724: kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
15725: kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
15726: ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
15727: tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
1.1 millert 15728:
1.11 millert 15729: #### IMS International (ims)
1.1 millert 15730: #
1.11 millert 15731: # There was a company called IMS International located in Carson City,
15732: # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
15733: # bus/Z80 hardware and a line of terminals called Ultimas.
1.1 millert 15734: #
15735:
1.11 millert 15736: # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
15737: ims950-b|bare ims950 no init string,
15738: is2@, use=ims950,
15739: # (ims950: removed obsolete ":ko@:" -- esr)
15740: ims950|ims televideo 950 emulation,
15741: xenl@,
15742: flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
15743: kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@,
15744: use=tvi950,
15745: # (ims950-rv: removed obsolete ":ko@:" -- esr)
15746: ims950-rv|ims tvi950 rev video,
15747: xenl@,
15748: flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
15749: kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@,
15750: use=tvi950-rv,
15751: ims-ansi|ultima2|ultimaII|IMS Ultima II,
15752: OTbs, am,
15753: cols#80, it#8, lines#24,
15754: clear=\E[H\E[2J, cub1=^H, cud1=\ED,
15755: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
15756: ht=^I, if=/usr/share/tabset/vt100,
15757: is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
15758: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
15759: rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
15760: smul=\E[4m,
1.1 millert 15761:
1.11 millert 15762: #### Intertec Data Systems
1.1 millert 15763: #
1.11 millert 15764: # I think this company is long dead as of 1995. They made an early CP/M
15765: # micro called the "Intertec Superbrain" that was moderately popular,
15766: # then sank out of sight.
1.1 millert 15767: #
15768:
1.11 millert 15769: superbrain|intertec superbrain,
15770: OTbs, am, bw,
15771: cols#80, lines#24,
15772: OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
15773: cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
15774: ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
15775: kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
15776: # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
15777: # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
15778: # and the reverse is actually true. Try it. -- esr)
15779: intertube|intertec|Intertec InterTube,
15780: OTbs, am,
15781: cols#80, lines#25,
15782: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15783: cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
15784: ind=^J, rmso=\E0@, smso=\E0P,
15785: # The intertube 2 has the "full duplex" problem like the tek 4025: if you
15786: # are typing and a command comes in, the keystrokes you type get interspersed
15787: # with the command and it messes up
15788: intertube2|intertec data systems intertube 2,
15789: OTbs,
15790: cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
15791: el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
15792: ll=^K^X\r, vpa=\013%p1%c,
15793: use=intertube,
1.1 millert 15794:
1.11 millert 15795: #### Ithaca Intersystems
1.1 millert 15796: #
1.11 millert 15797: # This company made S100-bus personal computers long ago in the pre-IBM-PC
15798: # past. They used to be reachable at:
1.1 millert 15799: #
1.11 millert 15800: # Ithaca Intersystems
15801: # 1650 Hanshaw Road
15802: # Ithaca, New York 14850
1.1 millert 15803: #
1.11 millert 15804: # However, the outfit went bankrupt years ago.
1.1 millert 15805: #
15806:
1.11 millert 15807: # The Graphos III was a color graphics terminal from Ithaca Intersystems.
15808: # These entries were written (originally in termcap syntax) by Brian Yandell
15809: # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
15810: # University of Wisconsin.
15811:
15812: # (graphos: removed obsolete and syntactically incorrect :kn=4:,
15813: # removed <if=/usr/share/tabset/init.graphos> and
15814: # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
15815: graphos|graphos III,
15816: am, mir,
15817: cols#80, it#8, lines#24,
15818: clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
15819: cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
15820: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15821: cuu=\E[%p1%dA, cuu1=\E[A,
15822: cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
15823: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
15824: il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
15825: kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15826: kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
15827: rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
15828: smir=\E[4h, smso=\E[7m,
15829: graphos-30|graphos III with 30 lines,
15830: lines#30,
15831: cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
1.1 millert 15832:
1.11 millert 15833: #### Modgraph
15834: #
15835: # These people used to be reachable at:
1.1 millert 15836: #
1.11 millert 15837: # Modgraph, Inc
15838: # 1393 Main Street,
15839: # Waltham, MA 02154
15840: # Vox: (617)-890-5796.
1.1 millert 15841: #
1.11 millert 15842: # However, if you call that number today you'll get an insurance company.
15843: # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
15844: # 26 Feb 1997 that says:
1.1 millert 15845: #
1.11 millert 15846: # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
15847: # for ~7 years. Modgraph still in business. Products are rugged laptop and
15848: # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
15849: # panel-mount etc). I can be emailed at sonfour@aol.com
1.1 millert 15850: #
1.11 millert 15851: # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
15852: # dated 1984. According to the manual, it featured Tek 4010/4014
15853: # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
1.1 millert 15854: #
1.11 millert 15855:
15856: modgraph|mod24|modgraph terminal emulating vt100,
15857: xenl@,
15858: cols#80, lines#24,
15859: cvvis=\E\^9;0s\E\^7;1s,
15860: is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
15861: rf@, ri=\EM\E[K$<5/>,
15862: use=vt100,
15863: # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
15864: modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
15865: am, da, db,
15866: cols#80, it#8, lines#24,
15867: clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
15868: cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
15869: ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
15870: is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
15871: ri=\EI$<5/>,
1.1 millert 15872: #
1.11 millert 15873: # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
15874: # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
15875: # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
15876: # mark and using delete-to-killbuffer work correctly. However, we would
15877: # like normal mode of operation to be using a Modgraph with 48 line setting.
15878: # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
15879: # the setting mark and delete-to-killbuffer results in the deletion of only
15880: # the line the mark is set on.
15881: # We've discovered that the delete-to-killbuffer works correctly
15882: # with TERM=mod and screen set to 80x48 but it's not obvious. Only
15883: # the first line disappears but a ctrl-l shows that it did work
15884: # correctly.
15885: modgraph48|mod|Modgraph w/48 lines,
15886: OTbs, OTpt, am, xenl,
15887: cols#80, it#8, lines#48, vt#3,
15888: OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
15889: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
15890: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15891: flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
15892: home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
15893: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15894: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
15895: ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15896: rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
15897: smso=\E[7m, smul=\E[4m,
15898:
15899: #### Morrow Designs
15900: #
15901: # This was George Morrow's company. They started in the late 1970s making
15902: # S100-bus machines. They used to be reachable at:
1.1 millert 15903: #
1.11 millert 15904: # Morrow
15905: # 600 McCormick St.
15906: # San Leandro, CA 94577
1.1 millert 15907: #
1.11 millert 15908: # but they're long gone now (1995).
1.1 millert 15909: #
1.11 millert 15910:
15911: # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
15912: # Jeff's specimen was dated June 1984.
15913: # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
15914: mt70|mt-70|Morrow MD-70; native Morrow mode,
15915: am, mir, msgr, xon,
15916: cols#80, it#8, lines#24,
15917: acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
15918: cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
15919: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
15920: cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
15921: flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
15922: ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
15923: kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
15924: kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
15925: kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
15926: kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
15927: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15928: kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
15929: rmacs=\E%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E], smul=\EG1,
15930: tbc=\E0,
15931: use=adm+sgr,
15932:
15933: #### Motorola
1.1 millert 15934: #
1.11 millert 15935:
15936: # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
15937: # (Seth H Zirin)
15938: ex155|Motorola Exorterm 155,
15939: OTbs, am, bw,
15940: OTkn#5, OTug#1, cols#80, lines#24,
15941: cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
15942: cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
15943: home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
15944: kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
15945: rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
15946:
15947: #### Omron
1.1 millert 15948: #
1.11 millert 15949: # This company is still around in 1995, manufacturing point-of-sale systems.
15950:
15951: omron|Omron 8025AG,
15952: OTbs, am, da, db,
15953: cols#80, lines#24,
15954: bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
15955: cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
15956: il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
15957:
15958: #### Ramtek
1.1 millert 15959: #
1.11 millert 15960: # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
15961: # were competition for things like the Tektronics 4025.
1.1 millert 15962: #
15963:
1.11 millert 15964: # Ramtek 6221 from BRL, probably by Doug Gwyn
15965: # The following SET-UP modes are assumed for normal operation:
15966: # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
15967: # NEWLINE_OFF 80_COLUMNS
15968: # Other SET-UP modes may be set for operator convenience or communication
15969: # requirements; I recommend
15970: # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
15971: # Hardware tabs are assumed to be every 8 columns; they can be set up by the
15972: # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
15973: # Note that the Control-E key is useless on this brain-damaged terminal. No
15974: # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15975: rt6221|Ramtek 6221 80x24,
15976: OTbs, OTpt, msgr, xon,
15977: OTkn#4, cols#80, it#8, lines#24, vt#3,
15978: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
15979: clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
15980: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15981: cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
15982: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
15983: cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
15984: hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
15985: kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
15986: kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
15987: nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
15988: rmso=\E[m, rmul=\E[m,
15989: rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
15990: sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
15991: smul=\E[4m, tbc=\E[3g,
15992: # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
15993: rt6221-w|Ramtek 6221 160x48,
15994: cols#160, lines#48,
15995: ll=\E[48;1H, use=rt6221,
15996:
15997: #### RCA
1.1 millert 15998: #
15999:
1.11 millert 16000: # RCA VP3301 or VP3501
16001: rca|rca vp3301/vp3501,
16002: OTbs,
16003: cols#40, lines#24,
16004: clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16005: cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
1.1 millert 16006:
16007:
1.11 millert 16008: #### Selanar
1.1 millert 16009: #
16010:
1.11 millert 16011: # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
16012: # The following SET-UP modes are assumed for normal operation:
16013: # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
16014: # ONLINE ANSI CURSOR_VISIBLE
16015: # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
16016: # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
16017: # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
16018: # For use with graphics software, all graphics modes should be set to factory
16019: # default. Other SET-UP modes may be set for operator convenience or
16020: # communication requirements. No delays are specified; use "stty ixon -ixany"
16021: # to enable DC3/DC1 flow control!
16022: # I commented out the scrolling capabilities since they are too slow.
16023: hirez100|Selanar HiREZ-100,
16024: OTbs, OTpt, mir, msgr, xon,
16025: OTkn#4, cols#80, it#8, lines#48, vt#3,
16026: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
16027: cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16028: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16029: cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
16030: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16031: hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
16032: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
16033: kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
16034: lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
16035: mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
16036: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16037: rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
16038: sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
16039: smul=\E[4m, tbc=\E[3g,
16040: hirez100-w|Selanar HiREZ-100 in 132-column mode,
16041: cols#132, use=hirez100,
16042:
16043: #### Signetics
1.1 millert 16044: #
16045:
1.11 millert 16046: # From University of Wisconsin
16047: vsc|Signetics Vsc Video driver by RMC,
16048: am, msgr,
16049: cols#80, it#8, lines#26,
16050: clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
16051: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
16052: ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
16053: rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
1.1 millert 16054:
1.11 millert 16055: #### Soroc
1.1 millert 16056: #
1.11 millert 16057: # Alan Frisbie <frisbie@flying-disk.com> writes:
1.1 millert 16058: #
1.11 millert 16059: # As you may recall, the Soroc logo consisted of their name,
16060: # with the letter "S" superimposed over an odd design. This
16061: # consisted of a circle with a slightly smaller 15 degree (approx.)
16062: # wedge with rounded corners inside it. The color was sort of
16063: # a metallic gold/yellow.
16064: #
16065: # If I had been more of a beer drinker it might have been obvious
16066: # to me, but it took a clue from their service department to make
16067: # me exclaim, "Of course!" The circular object was the top of
16068: # a beer can (the old removable pop-top style) and "Soroc" was an
16069: # anagram for "Coors".
16070: #
16071: # I can just imagine the founders of the company sitting around
16072: # one evening, tossing back a few and trying to decide what to
16073: # call their new company and what to use for a logo.
16074: #
1.1 millert 16075:
1.11 millert 16076: # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
16077: soroc120|iq120|soroc|soroc iq120,
16078: clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
16079: kcuf1=^L, kcuu1=^K,
16080: use=adm3a,
16081: soroc140|iq140|soroc iq140,
1.1 millert 16082: OTbs, am, mir,
1.11 millert 16083: cols#80, lines#24,
16084: bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16085: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
16086: dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
16087: kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
16088: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16089: kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
16090: rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
1.1 millert 16091:
1.11 millert 16092: #### Southwest Technical Products
1.1 millert 16093: #
1.11 millert 16094: # These guys made an early personal micro called the M6800.
16095: # The ct82 was probably its console terminal.
1.1 millert 16096: #
16097:
1.11 millert 16098: # (swtp: removed obsolete ":bc=^D:" -- esr)
16099: swtp|ct82|southwest technical products ct82,
1.1 millert 16100: am,
1.11 millert 16101: cols#82, lines#20,
16102: bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
16103: cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
16104: home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
16105: is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
16106: ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
1.1 millert 16107:
1.11 millert 16108: #### Synertek
16109: #
16110: # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
1.1 millert 16111: #
1.11 millert 16112: # Synertek used to make ICs, various 6502-based single-board process
16113: # control and hobbyist computers, and assorted peripherals including a
16114: # series of small inexpensive terminals (I think they were one of the
16115: # first to have a "terminal-on-a-keyboard", where the terminal itself
16116: # was only slightly larger than the keyboard).
1.1 millert 16117: #
1.11 millert 16118: # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
16119: # was a 40x24 terminal that could connect to a standard TV through a
16120: # video modulator. The KTM-2/80 was the 80-column version (the 2/40
16121: # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
16122: # I have a KTM-2/80 still in working order. The KTM-2s had fully
16123: # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
16124: # ROM and 2 ROMs as character generators. They were incredibly simple,
16125: # and I've never had any problems with mine (witness the fact that mine
16126: # was made in 1981 and is still working great... I've blown the video
16127: # output transistor a couple of times, but it's a 2N2222 :-)
1.1 millert 16128: #
1.11 millert 16129: # The KTM-3 (which is what is listed in the terminfo file) was their
16130: # attempt at putting a KTM-2 in a box (and some models came with a
16131: # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
16132: # control and escape sequences are very different. The KTM-3 was always
16133: # real broken, at least according to the folks I've talked to about it.
16134: #
16135: # The padding in the entry is probably off--these terminals were very
16136: # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
16137: # anyone with any sanity replaced the ROMs with something that provided
16138: # a reasonable subset of VT100 functionality, since the usual ROMs were
16139: # obviously very primitive... oh, you could get an upgraded ROM from
16140: # Synertek for some incredible amount of money, but what hacker with an
16141: # EPROM burner would do that? :)
16142: #
16143: # Sorry I don't have any contact info; I believe they were located in
16144: # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
16145: # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
16146: # business these days.
1.1 millert 16147: #
16148:
1.11 millert 16149: # Tested, seems to work fine with vi.
16150: synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
16151: am,
1.1 millert 16152: cols#80, lines#24,
1.11 millert 16153: clear=^Z, cub1=^H, cuf1=^L,
16154: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
16155:
16156: #### Tab Office Products
16157: #
16158: # TAB Products Co. - Palo Alto, California
16159: # Electronic Office Products,
16160: # 1451 California Avenue 94304
16161: #
16162: # I think they're out of business.
16163: #
1.1 millert 16164:
1.11 millert 16165: # The tab 132 uses xon/xoff, so no padding needed.
16166: # <smkx>/<rmkx> have nothing to do with arrow keys.
16167: # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
16168: # Seems to be no way to get rid of status line.
16169: # The manual for this puppy was dated June 1981. It claims to be VT52-
16170: # compatible but looks more vt100-like.
16171: tab132|tab|tab132-15|tab 132/15,
16172: da, db,
16173: OTdN@, cols#80, lines#24, lm#96,
16174: cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
16175: il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
16176: kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
16177: use=vt100,
16178: tab132-w|tab132 in wide mode,
16179: cols#132,
16180: is2=\E[?7h\E[?3h\E[?5l, use=tab132,
16181: tab132-rv|tab132 in reverse-video mode,
16182: is2=\E[?7h\E[?3l\E[?5h, use=tab132,
16183: tab132-w-rv|tab132 in reverse-video/wide mode,
16184: is2=\E[?7h\E[?3h\E[?5h,
16185: use=tab132-w,
1.1 millert 16186:
16187:
1.11 millert 16188: #### Teleray
16189: #
16190: # Research Incorporated
16191: # 6425 Flying Cloud Drive
16192: # Eden Prairie, MN 55344
16193: # Vox: (612)-941-3300
16194: #
16195: # The Teleray terminals were all discontinued in 1992-93. RI still services
16196: # and repairs these beasts, but no longer manufactures them. The Teleray
16197: # people believe that all the types listed below are very rare now (1995).
16198: # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
16199: # Model 100) that were ANSI-compatible.
1.1 millert 16200: #
1.11 millert 16201: # Note two things called "teleray". Reorder should move the common one
16202: # to the front if you have either. A dumb teleray with the cursor stuck
16203: # on the bottom and no obvious model number is probably a 3700.
1.1 millert 16204: #
16205:
1.11 millert 16206: t3700|dumb teleray 3700,
16207: OTbs,
16208: cols#80, lines#24,
16209: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
16210: t3800|teleray 3800 series,
16211: OTbs,
16212: cols#80, it#8, lines#24,
16213: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16214: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
16215: home=\EH, ht=^I, ind=^J, ll=\EY7\s,
16216: t1061|teleray|teleray 1061,
16217: OTbs, am, km, xhp, xt,
16218: cols#80, it#8, lines#24, xmc#1,
16219: bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16220: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16221: dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
16222: ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
16223: is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
16224: kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
16225: kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
16226: tbc=\EG,
16227: t1061f|teleray 1061 with fast PROMs,
16228: dl1=\EM, il1=\EL, ip@, use=t1061,
16229: # "Teleray Arpa Special", officially designated as
16230: # "Teleray Arpa network model 10" with "Special feature 720".
16231: # This is the new (1981) fast microcode updating the older "arpa" proms
16232: # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
16233: # converts the keypad to programmable function keys, and has other goodies.
16234: # Standout mode is still broken (magic cookie, etc) so is suppressed as no
16235: # programs handle such lossage properly.
16236: # Note: this is NOT the old termcap's "t1061f with fast proms."
16237: # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
16238: # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
16239: t10|teleray 10 special,
16240: OTbs, km, xhp, xt,
16241: cols#80, it#8, lines#24, xmc#2,
16242: clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
16243: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16244: dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
16245: ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
16246: smul=\ERH,
16247: # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
16248: # back/forth words. Put the function keys (f1-f10) where they can be
16249: # found, and turn off the other magic keys along the top row, except
16250: # for line/local. Do the magic appropriate to make the page shifts work.
16251: # Also toggle ^S/^Q for those of us who use Emacs.
16252: t16|teleray 16,
16253: am, da, db, mir, xhp, xt,
16254: cols#80, lines#24,
16255: bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
16256: cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
16257: dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
16258: ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
16259: kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
16260: rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
16261: rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
16262: smso=\E[7m, smul=\E[4m,
1.1 millert 16263:
1.11 millert 16264: #### Texas Instruments (ti)
1.1 millert 16265: #
16266:
1.11 millert 16267: # The Silent 700 was so called because it was built around a quiet thermal
16268: # printer. It was portable, equipped with an acoustic coupler, and pretty
16269: # neat for its day.
16270: ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
16271: OTbs, hc, os,
1.1 millert 16272: cols#80,
1.11 millert 16273: bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
16274:
1.1 millert 16275: #
1.11 millert 16276: # Texas Instruments 916 VDT 7 bit control mode
1.1 millert 16277: #
1.11 millert 16278: ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
16279: da, db, in, msgr,
16280: cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
16281: cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
16282: cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
16283: cvvis=\E[?25h, dch=\E[%p1%dP$<250>, dch1=\E[P,
16284: dl=\E[%p1%dM, ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K,
16285: el1=\E[1K, enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
16286: hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
16287: il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
16288: kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
16289: kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
16290: kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
16291: kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
16292: kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p,
16293: smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, use=vt220,
1.1 millert 16294: #
1.11 millert 16295: # Texas Instruments 916 VDT 8 bit control mode
1.1 millert 16296: #
1.11 millert 16297: ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
16298: kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
16299: kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
16300: kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
16301: kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
16302: kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
16303: kich1=\233@, knp=\233S, kpp=\233T, kprt=^X,
16304: use=ti916,
1.1 millert 16305: #
1.11 millert 16306: # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
1.1 millert 16307: #
1.11 millert 16308: ti916-132|Texas Instruments 916 VDT vt220 132 column,
16309: cols#132, use=ti916,
1.1 millert 16310: #
1.11 millert 16311: # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
1.1 millert 16312: #
1.11 millert 16313: ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
16314: cols#132, use=ti916-8,
16315: ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
16316: OTbs, am, xon,
16317: cols#80, it#8, lines#24,
16318: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16319: clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
16320: csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
16321: cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
16322: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16323: il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
16324: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
16325: kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
16326: kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
16327: ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
16328: smul=\E[4m, tbc=\E[3g,
16329: ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
16330: am, xon,
16331: cols#80, it#8, lines#24,
16332: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16333: clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
16334: csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
16335: cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
16336: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16337: il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
16338: kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
16339: kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
16340: kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
16341: kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
16342: rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
16343: smul=\E[4m, tbc=\E[3g,
16344: ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
16345: cols#132, use=ti924,
16346: ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
16347: cols#132, use=ti924-8,
16348: ti931|Texas Instruments 931 VDT,
16349: OTbs, am, xon,
16350: cols#80, lines#24,
16351: bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
16352: cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16353: cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
16354: ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
16355: is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16356: kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
16357: kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
16358: kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
16359: sgr0=\E4@, smso=\E4A, smul=\E4D,
16360: ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
16361: csr@, ind=\E[1S, ri=\E[1T,
16362: use=ti924,
16363: # (ti926-8: I corrected this from the broken SCO entry -- esr)
16364: ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
16365: csr@, ind=\2331S, ri=\2331T,
16366: use=ti924-8,
16367: ti_ansi|basic entry for ti928,
16368: am, bce, eo, xenl, xon,
16369: colors#8, cols#80, it#8, lines#25, pairs#64,
16370: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
16371: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
16372: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
16373: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
16374: il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
16375: kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
16376: kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
16377: kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
16378: op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
16379: setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
16380: smso=\E[7m, smul=\E[4m,
1.1 millert 16381: #
1.11 millert 16382: # 928 VDT 7 bit control mode
1.1 millert 16383: #
1.11 millert 16384: ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
16385: kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
16386: kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
16387: kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
16388: kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
16389: kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~,
16390: use=ti_ansi,
1.1 millert 16391: #
1.11 millert 16392: # 928 VDT 8 bit control mode
1.1 millert 16393: #
1.11 millert 16394: ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
16395: kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
16396: kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
16397: kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
16398: kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
16399: kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
16400: kpp=\233T, kprt=\23335~,
16401: use=ti_ansi,
16402:
16403: #### Zentec (zen)
1.1 millert 16404: #
1.11 millert 16405:
16406: # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
16407: # had just <smso>=\EG6 which I think means standout was supposed to be
16408: # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
16409: # <invis> might work-- esr)
16410: zen30|z30|zentec 30,
16411: OTbs, am, mir, ul,
16412: cols#80, lines#24,
16413: bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16414: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16415: dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
16416: il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
16417: smul@,
16418: use=adm+sgr,
16419: # (zen50: this had extension capabilities
16420: # :BS=^U:CL=^V:CR=^B:
16421: # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
16422: # which were also in the original entry -- esr)
16423: # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
16424: zen50|z50|zentec zephyr,
16425: OTbs, am,
16426: cols#80, lines#24, xmc#1,
16427: clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
16428: cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
16429: invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
16430: rmul@, smul@,
16431: use=adm+sgr,
16432:
16433: # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
16434: cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
16435: OTbs, am, bw,
16436: cols#80, lines#24,
16437: blink=\EM", clear=\EH\EJ, cnorm=\EP,
16438: csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
16439: cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
16440: cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
16441: invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
16442: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
16443: rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
16444: smso=\EM$, smul=\EM0,
16445:
16446: ######## OBSOLETE UNIX CONSOLES
1.1 millert 16447: #
16448:
1.11 millert 16449: #### Apollo consoles
16450: #
16451: # Apollo got bought by Hewlett-Packard. The Apollo workstations are
16452: # labeled HP700s now.
1.1 millert 16453: #
16454:
1.11 millert 16455: # From: Gary Darland <goodmanc@garnet.berkeley.edu>
16456: apollo|apollo console,
16457: OTbs, am, mir,
16458: cols#88, lines#53,
16459: clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
16460: cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
16461: ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
16462: rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
16463: smso=\ES, smul=\EU, vpa=\EO+\s,
1.1 millert 16464:
1.11 millert 16465: # We don't know whether or not the apollo guys replicated DEC's firmware bug
16466: # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
16467: # both these capabilities.
16468: apollo_15P|apollo 15 inch display,
16469: rmir@, smir@, use=vt132,
16470: apollo_19L|apollo 19 inch display,
16471: rmir@, smir@, use=vt132,
16472: apollo_color|apollo color display,
16473: rmir@, smir@, use=vt132,
1.1 millert 16474:
1.11 millert 16475: #### Convergent Technology
1.1 millert 16476: #
1.11 millert 16477: # Burroughs bought Convergent shortly before it merged with Univac.
16478: # CTOS is (I believe) dead. Probably the aws is too (this entry dates
16479: # from 1991 or earlier).
1.1 millert 16480: #
16481:
1.11 millert 16482: # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
16483: # (aws: removed unknown :dn=^K: -- esr)
16484: aws|Convergent Technologies AWS workstation under UTX and Xenix,
16485: am,
16486: OTug#0, cols#80, lines#28, xmc#0,
16487: OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
16488: clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
16489: dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
16490: ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
16491: kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
16492: rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
16493: vpa=\EV%p1%c,
16494: awsc|Convergent Technologies AWS workstation under CTOS,
16495: am,
16496: OTug#0, cols#80, lines#24, xmc#0,
16497: OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
16498: cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
16499: el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
16500: rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
16501: smul=\EAC,
16502:
16503: #### DEC consoles
1.1 millert 16504: #
16505:
1.11 millert 16506: # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
16507: # The digital uVax II's had a graphic display called a qdss. It was
16508: # supposed to be a high performance graphic accelerator, but it was
16509: # late to market and barely appeared before faster dumb frame buffers
16510: # appeared. I have only used this display while running X11. However,
16511: # during bootup, it was in text mode, and probably had a terminal emulator
16512: # within it. And that is what your termcap entry is for. In graphics
16513: # mode the screen size is 1024x864 pixels.
16514: qdss|qdcons|qdss glass tty,
16515: OTbs, am,
16516: cols#128, lines#57,
16517: clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
16518: cup=\E=%p1%c%p2%c, cuu1=^K,
16519:
16520: #### Fortune Systems consoles
16521: #
16522: # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
16523: # in their day; I (esr) used one myself for a year or so around 1984.
16524: # They had no graphics, though, and couldn't compete against Suns and
16525: # the like. R.I.P.
1.1 millert 16526: #
1.11 millert 16527:
16528: # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
16529: # (This had extension capabilities
16530: # :rv=\EH:re=\EI:rg=0:GG=0:\
16531: # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
16532: # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
16533: # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
16534: # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
16535: # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
16536: # to force both magic cookie glitches off. Once upon a time, I
16537: # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
16538: # function keys; thus the "Al" value for HM was certainly an error. I renamed
16539: # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
16540: # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
16541: # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
16542: # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
16543: fos|fortune|Fortune system,
16544: OTbs, am, bw,
16545: cols#80, lines#25,
16546: acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
16547: clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
16548: cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
16549: cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
16550: ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
16551: ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
16552: kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
16553: kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
16554: kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
16555: khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
16556: rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
16557: smso=^\H`, smul=^\HP,
16558:
16559: #### Masscomp consoles
1.1 millert 16560: #
1.11 millert 16561: # Masscomp has gone out of business. Their product line was purchased by
16562: # comany in Georgia (US) called "XS International", parts and service may
16563: # still be available through them.
1.1 millert 16564: #
1.11 millert 16565:
16566: # (masscomp: ":MT:" changed to ":km:"; -- esr)
16567: masscomp|masscomp workstation console,
16568: OTbs, km, mir,
16569: cols#80, it#8, lines#24,
16570: clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
16571: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16572: ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
16573: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
16574: rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
16575: masscomp1|masscomp large screen version 1,
16576: cols#104, lines#36, use=masscomp,
16577: masscomp2|masscomp large screen version 2,
16578: cols#64, lines#21, use=masscomp,
16579:
16580: ######## OTHER OBSOLETE TYPES
1.1 millert 16581: #
1.11 millert 16582: # These terminals are *long* dead -- these entries are retained for
16583: # historical interest only.
1.1 millert 16584: #
16585:
1.11 millert 16586: #### Obsolete non-ANSI software emulations
1.1 millert 16587: #
16588:
16589: # CTRM terminal emulator
16590: # 1. underlining is not allowed with colors: first, is is simulated by
16591: # black on white, second, it disables background color manipulations.
16592: # 2. BLINKING, REVERSE and BOLD are allowed with colors,
16593: # so we have to save their status in the static registers A, B and H
16594: # respectively, to be able to restore them when color changes
16595: # (because any color change turns off ALL attributes)
16596: # 3. <bold> and <rev> sequences alternate modes,
16597: # rather then simply entering them. Thus we have to check the
16598: # static register B and H to determine the status, before sending the
16599: # escape sequence.
16600: # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
16601: # and then reset colors
16602: # 5. implementation of the protect mode would badly penalize the performance.
16603: # we would have to use \E&bn sequence to turn off colors (as well as all
16604: # other attributes), and keep the status of protect mode in yet another
16605: # static variable. If someone really needs this mode, they would have to
16606: # create another terminfo entry.
16607: # 6. original color-pair is white on black.
16608: # store the information about colors into static registers
16609: # 7. set foreground color. it performs the following steps.
16610: # 1) turn off all attributes
16611: # 2) turn on the background and video attributes that have been turned
16612: # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
16613: # 3) turn on foreground attributes
16614: # 4) store information about foreground into U,V,W static registers
16615: # 8. turn on background: similar to turn on foreground above
1.11 millert 16616: ctrm|C terminal emulator,
16617: am, bce, xon,
16618: colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
16619: pairs#63, pb#19200, vt#6,
16620: bel=^G, blink=\E&dA%{1}%PA,
16621: bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
16622: clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16623: cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
16624: ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
16625: il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
16626: kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
16627: kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
16628: kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
16629: op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
16630: rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
16631: setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
16632: setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
16633: sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
16634: sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
16635: smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
1.1 millert 16636:
16637: # gs6300 - can't use blue foreground, it clashes with underline;
16638: # it's simulated with cyan
16639: # Bug: The <op> capability probably resets attributes.
16640: # (gs6300: commented out <rmln> (no <smln>) --esr)
1.11 millert 16641: gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
16642: am, bce, msgr, xon,
16643: colors#8, cols#80, it#8, lines#24, pairs#63,
16644: acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16645: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
16646: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16647: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16648: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16649: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16650: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
16651: is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
16652: kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
16653: kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
16654: khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
16655: ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
16656: setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
16657: sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
1.1 millert 16658:
16659: # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
16660: # MS-Kermit with Heath-19 emulation mode enabled
16661: # (h19k: changed ":pt@:" to ":it@"
16662: h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
16663: am@, da, db, xt,
16664: it@,
1.11 millert 16665: ht@, use=h19-u,
1.1 millert 16666:
16667: # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
16668: # Software (formerly Peripherals Computers & Supplies, Inc) of
16669: # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
16670: # also be reached at support@synergy.com.
16671: versaterm|versaterm vt100 emulator for the macintosh,
16672: am, xenl,
16673: cols#80, it#8, lines#24,
16674: bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
1.11 millert 16675: clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16676: cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
16677: cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
16678: dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
16679: el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
16680: il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
16681: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
16682: kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
16683: rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
16684: rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
16685: sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
16686: smul=\E[4m$<2/>,
1.1 millert 16687:
16688: # From: Rick Thomas <ihnp4!btlunix!rbt>
16689: # (xtalk: I added <rmam>/<smam> based on the init string.
1.11 millert 16690: xtalk|IBM PC with xtalk communication program (versions up to 3.4),
16691: am, mir, msgr, xon,
16692: cols#80, it#8, lines#24, vt#3, xmc#1,
16693: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16694: bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
16695: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
16696: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
16697: cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
16698: el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
16699: il1=\E[L$<99>, ind=^J, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H,
16700: kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
16701: kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\EOx,
16702: kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv,
16703: kf8=\EOl, kf9=\EOw, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
16704: rmkx=\E[?1l\E>, rmso=\E[m\s,
16705: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
16706: smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
16707: tbc=\E[3g,
1.1 millert 16708:
16709: # The official PC terminal emulator program of the AT&T Product Centers.
16710: # Note - insert mode commented out - doesn't seem to work on AT&T PC.
1.11 millert 16711: simterm|attpc running simterm,
16712: am,
16713: cols#80, lines#24,
16714: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
16715: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
16716: dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
16717: rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
16718:
16719: #### Daisy wheel printers
16720: #
16721: # This section collects Diablo, DTC, Xerox, Qume, and other daisy
16722: # wheel terminals. These are now largely obsolete.
16723: #
16724:
16725: # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
16726: diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
16727: hc, os,
16728: cols#132, it#8,
16729: cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
16730: ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
16731: diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
16732: cols#124,
16733: is2=\r \E9, use=diablo1620,
16734: # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
16735: diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
16736: bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
16737: use=diablo1620,
16738: # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
16739: # file -- esr)
16740: diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
16741: cols#124,
16742: rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
16743: diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
16744: use=diablo1640-lm,
16745: # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
16746: # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
16747: # The terminal has tabs, but I'm getting tired of fighting the braindamage.
16748: # If no tab is set or the terminal's in a bad mood, it glitches the screen
16749: # around all of memory. Note that return puts a blank ("a return character")
16750: # in the space the cursor was at, so we use ^P return (and thus ^P newline for
16751: # newline). Note also that if you turn off :pt: and let Unix expand tabs,
16752: # curses won't work (some old BSD versions) because it doesn't clear this bit,
16753: # and cursor addressing sends a tab for row/column 9. What a losing terminal!
16754: # I have been unable to get tabs set in all 96 lines - it always leaves at
16755: # least one line with no tabs in it, and once you tab through that line,
16756: # it completely weirds out.
16757: # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
16758: dtc382|DTC 382,
16759: am, da, db, xhp,
16760: cols#80, lines#24, lm#96,
16761: bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
16762: cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
16763: dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
16764: home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
16765: rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
16766: dtc300s|DTC 300s,
16767: hc, os,
16768: cols#132,
16769: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
16770: hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
16771: gsi|mystery gsi terminal,
16772: hc, os,
16773: cols#132,
16774: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
16775: ind=^J,
16776: aj830|aj832|aj|anderson jacobson,
16777: hc, os,
16778: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
16779: ind=^J,
16780: # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
16781: aj510|Anderson-Jacobson model 510,
16782: am, mir,
16783: cols#80, lines#24,
16784: clear=^L, cub1=^H, cuf1=\EX,
16785: cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
16786: dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
16787: il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
16788: kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
16789: rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
16790: smul=\E"U,
16791: # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
16792: # This is incomplete, but it's a start.
16793: nec5520|nec|spinwriter|nec 5520,
16794: hc, os,
16795: cols#132, it#8,
16796: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
16797: hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
16798: kbs=^H, tbc=\E3,
16799: qume5|qume|Qume Sprint 5,
16800: hc, os,
16801: cols#80, it#8,
16802: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
16803: hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
16804: # I suspect the xerox 1720 is the same as the diablo 1620.
16805: xerox1720|x1720|x1750|xerox 1720,
16806: hc, os,
16807: cols#132, it#8,
16808: bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
16809: tbc=\E2,
1.1 millert 16810:
16811: #### Miscellaneous obsolete terminals, manufacturers unknown
16812: #
16813: # If you have any information about these (like, a manufacturer's name,
16814: # and a date on the serial-number plate) please send it!
16815:
16816: cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
1.11 millert 16817: OTbs, am,
1.1 millert 16818: cols#73, lines#36,
16819: clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
16820: cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
1.11 millert 16821: OTbs, am,
1.1 millert 16822: cols#85, lines#39,
16823: clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
1.11 millert 16824: kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
16825: kf4=\E8, rmso=\Em^C, smso=\Em^L,
1.1 millert 16826: cops10|cops|cops-10|cops 10,
16827: am, bw,
16828: cols#80, lines#24,
1.11 millert 16829: bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16830: cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
16831: ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
16832: khome=^Y,
1.1 millert 16833: # (d132: removed duplicate :ic=\E5:,
16834: # merged in capabilities from a BRL entry -- esr)
16835: d132|datagraphix|datagraphix 132a,
16836: da, db, in,
16837: cols#80, lines#30,
1.11 millert 16838: bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
16839: cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
16840: dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
16841: kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
1.1 millert 16842: # The d800 was an early portable terminal from c.1984-85 that looked a lot
16843: # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
16844: # mode (which is what this entry looks like) and several other lesser-known
16845: # emulations.
16846: d800|Direct 800/A,
1.11 millert 16847: OTbs, am, da, db, msgr, xhp,
1.1 millert 16848: cols#80, it#8, lines#24,
1.11 millert 16849: acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
1.1 millert 16850: bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
1.11 millert 16851: cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16852: cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
16853: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
16854: kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
16855: ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
16856: smacs=\E[1m, smso=\E[7m, smul=\E[4m,
1.1 millert 16857: digilog|digilog 333,
1.11 millert 16858: OTbs,
16859: cols#80, lines#16,
16860: bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
16861: home=^N, ind=^J,
1.1 millert 16862: # The DWK was a terminal manufactured in the Soviet Union c.1986
1.11 millert 16863: dwk|dwk-vt|dwk terminal,
16864: am,
16865: cols#80, it#8, lines#24,
16866: acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
16867: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16868: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
16869: ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
16870: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
16871: kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
16872: kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
16873: kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
16874: sgr0=\EX, smacs=\EF, smso=\ET,
1.1 millert 16875: env230|envision230|envision 230 graphics terminal,
16876: xenl@,
1.11 millert 16877: mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
16878: sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, use=vt100,
1.1 millert 16879: # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
16880: # coupler attached, the whole rig fitting in a suitcase and more or less
16881: # portable. Hot stuff for c.1977 :-) -- esr
16882: ep48|ep4080|execuport 4080,
1.11 millert 16883: OTbs, am, os,
1.1 millert 16884: cols#80,
16885: bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
16886: ep40|ep4000|execuport 4000,
1.11 millert 16887: cols#136, use=ep4080,
1.14 millert 16888: # Adam Thompson <athompso@pangea.ca> tells us:
1.1 millert 16889: # Informer series - these are all portable units, resembling older
16890: # automatic bread-baking machines. The terminal looks like a `clamshell'
16891: # design, but isn't. The structure is similar to the Direct terminals,
16892: # but only half the width. The entire unit is only about 10" wide.
16893: # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
16894: # keyboard. All the keys are crammed together, much like some laptop
16895: # PCs today, but perhaps less well organized...all these units have a
16896: # bewildering array of plugs on the back, including a built-in modem.
16897: # The 305 was a color version of the 304; the 306 and 307 were mono and
16898: # color terminals built for IBM bisync protocols.
16899: # From: Paul Leondis <unllab@amber.berkeley.edu>
16900: ifmr|Informer D304,
1.11 millert 16901: OTbs, am,
1.1 millert 16902: cols#80, lines#24,
16903: clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
1.11 millert 16904: cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
16905: ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
16906: smso=\EJ,
1.1 millert 16907: # Entry largely based on wy60 and has the features of wy60ak.
1.11 millert 16908: opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
16909: am, bw, hs, km, mir, msgr, ul, xon,
16910: cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
16911: acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
16912: cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
16913: cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
16914: dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
16915: ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
16916: hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
16917: ip=$<3>,
16918: is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
16919: kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
16920: kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
16921: kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
16922: kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
16923: kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16924: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16925: kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
16926: mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
16927: pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
16928: pfx=\EZ1%p1%{63}%+%c%p2%s\177,
16929: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
16930: rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
16931: rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
16932: rs3=\EwG\Ee($<150>,
16933: sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
16934: sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
16935: smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
16936: smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
16937: uc=\EG8%p1%c\EG0,
16938: use=adm+sgr,
1.1 millert 16939: teletec|Teletec Datascreen,
1.11 millert 16940: OTbs, am,
1.1 millert 16941: cols#80, lines#24,
16942: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
16943: home=^^, ind=^J,
16944: # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
16945: # This description is for the LANPAR Technologies VISION 3220
16946: # terminal from 1984/85. The function key definitions k0-k5 represent the
16947: # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
16948: # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
1.14 millert 16949: #
16950: # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
16951: # I had a couple of scopes (3221) like this once where I used to work, around
16952: # the 1987 time frame if memory serves me correctly. These scopes were made
16953: # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
16954: # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
16955: # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
16956: # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
16957: # (3221) cost about $1500 each, and one was always broken -- had to be sent
16958: # back to the shop for repairs.
16959: # The only real advantage these scopes had over the VT-240's were:
16960: # 1) They were faster in the Regis display, or at least the ones I did
16961: # 2) They had a handy debugging feature where you could split-screen the
16962: # scope, the graphics would appear on the top, and the REGIS commands would
16963: # appear on the bottom. I don't remember the VT-240s being able to do that.
16964: # I would swear that LANPAR Technologies was in MA someplace, but since I
16965: # don't work at the same place anymore, and those terminals and manuals were
16966: # long since junked, I cannot be any more sure than that.
16967: #
1.1 millert 16968: # (v3220: removed obsolete ":kn#10:",
16969: # I added <rmam>/<smam> based on the init string -- esr)
16970: v3220|LANPAR Vision II model 3220/3221/3222,
1.11 millert 16971: OTbs, am, mir, xenl,
1.1 millert 16972: cols#80, it#8, lines#24,
1.11 millert 16973: clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
16974: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16975: ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
16976: is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
16977: kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
16978: kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
16979: kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
16980: rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1.1 millert 16981: smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
16982: ######## ICH/ICH1 VERSUS RMIR/SMIR
16983: #
16984: # Some non-curses applications get confused if both ich/ich1 and rmir/smir
16985: # are present; the symptom is doubled characters in an update using insert.
16986: # These applications are technically correct; in both 4.3BSD termcap and
16987: # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
16988: # unless the terminal needs both. To my knowledge, no terminal still in this
16989: # file requires both other than the very obsolete dm2500.
16990: #
16991: # For ncurses-based applications this is not a problem, as ncurses uses
16992: # one or the other as appropriate but never mixes the two. Therefore we
16993: # have not corrected entries like `linux' and `xterm' that specify both.
16994: # If you see doubled characters from these, use the linux-nic and xterm-nic
16995: # entries that suppress ich/ich1. And upgrade to ncurses!
16996: #
16997:
16998: ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
16999: #
17000: # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
17001: # ECMA-48 standards are said to be almost identical, but are not the same
17002: # as X3.64 (though for practical purposes they are close supersets of it).
17003: #
17004: # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
17005: # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
17006: # Coded Character Sets"), include your snail-mail address, and you should
17007: # receive the document in due course. Don't expect an email acknowledgement.
17008: #
17009: # Related standards include "X3.4-1977: American National Standard Code for
17010: # Information Interchange" (the ASCII standard) and "X3.41.1974:
17011: # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
17012: # American National Standard for Information Interchange." I believe (but
17013: # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
17014: # respectively.
17015: #
17016:
17017: #### VT100/ANSI/ECMA-48
17018: #
17019: # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
17020: # and ECMA-48 Control Functions for Coded Character Sets.
17021: #
17022: # Much of the content of this comment is adapted from a table prepared by
17023: # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
17024: # discussion of some terminfo-related issues, and updates to capture ECMA-48
17025: # have been added. Control functions described in ECMA-48 only are tagged
17026: # with * after their names.
17027: #
17028: # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
17029: # sequences. In the main table, \E stands for an escape (\033) character,
17030: # SPC for space. Pn stands for a single numeric parameter to be inserted
17031: # in decimal ASCII. Ps stands for a list of such parameters separated by
17032: # semicolons. Parameter meanings for most parametrized sequences are
17033: # decribed in the notes.
17034: #
17035: # Sequence Sequence Parameter or
17036: # Mnemonic Name Sequence Value Mode terminfo
17037: # -----------------------------------------------------------------------------
17038: # APC Applicatn Program Command \E _ - Delim -
17039: # BEL Bell * ^G - - bel
17040: # BPH Break Permitted Here * \E B - * -
17041: # BS Backpace * ^H - EF -
17042: # CAN Cancel * ^X - - - (A)
17043: # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
17044: # CCH Cancel Previous Character \E T - - -
17045: # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
17046: # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
17047: # CMD Coding Method Delimiter * \E
17048: # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
17049: # CPL Cursor Preceding Line \E [ Pn F 1 eF -
17050: # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
17051: # CSI Control Sequence Intro \E [ - Intro -
17052: # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
17053: # CUB Cursor Backward \E [ Pn D 1 eF cub
17054: # CUD Cursor Down \E [ Pn B 1 eF cud
17055: # CUF Cursor Forward \E [ Pn C 1 eF cuf
17056: # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
17057: # CUU Cursor Up \E [ Pn A 1 eF cuu
17058: # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
17059: # DA Device Attributes \E [ Pn c 0 - -
17060: # DAQ Define Area Qualification \E [ Ps o 0 - -
17061: # DCH Delete Character \E [ Pn P 1 eF dch
17062: # DCS Device Control String \E P - Delim -
17063: # DL Delete Line \E [ Pn M 1 eF dl
17064: # DLE Data Link Escape * ^P - - -
17065: # DMI Disable Manual Input \E \ - Fs -
17066: # DSR Device Status Report \E [ Ps n 0 - - (I)
17067: # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
17068: # EA Erase in Area \E [ Ps O 0 eF - (J)
17069: # ECH Erase Character \E [ Pn X 1 eF ech
17070: # ED Erase in Display \E [ Ps J 0 eF ed (J)
17071: # EF Erase in Field \E [ Ps N 0 eF -
17072: # EL Erase in Line \E [ Ps K 0 eF el (J)
17073: # EM End of Medium * ^Y - - -
17074: # EMI Enable Manual Input \E b Fs -
17075: # ENQ Enquire ^E - - -
17076: # EOT End Of Transmission ^D - * -
17077: # EPA End of Protected Area \E W - - - (K)
17078: # ESA End of Selected Area \E G - - -
17079: # ESC Escape ^[ - - -
17080: # ETB End Transmission Block ^W - - -
17081: # ETX End of Text ^C - - -
17082: # FF Form Feed ^L - - -
17083: # FNK Function Key * \E [ Pn SPC W - - -
17084: # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
17085: # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
17086: # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
17087: # GSS Graphic Size Selection \E [ Pn SPC C none FE -
17088: # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
17089: # HPB Char Position Backward \E [ j 1 FE -
17090: # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
17091: # HT Horizontal Tab * ^I - FE - (N)
17092: # HTJ Horz Tab w/Justification \E I - FE -
17093: # HTS Horizontal Tab Set \E H - FE hts
17094: # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
17095: # ICH Insert Character \E [ Pn @ 1 eF ich
17096: # IDCS ID Device Control String \E [ SPC O - * -
17097: # IGS ID Graphic Subrepertoire \E [ SPC M - * -
17098: # IL Insert Line \E [ Pn L 1 eF il
17099: # IND Index \E D - FE -
17100: # INT Interrupt \E a - Fs -
17101: # JFY Justify \E [ Ps SPC F 0 FE -
17102: # IS1 Info Separator #1 * ^_ - * -
17103: # IS2 Info Separator #1 * ^^ - * -
17104: # IS3 Info Separator #1 * ^] - * -
17105: # IS4 Info Separator #1 * ^\ - * -
17106: # LF Line Feed ^J - - -
17107: # LS1R Locking Shift Right 1 * \E ~ - - -
17108: # LS2 Locking Shift 2 * \E n - - -
17109: # LS2R Locking Shift Right 2 * \E } - - -
17110: # LS3 Locking Shift 3 * \E o - - -
17111: # LS3R Locking Shift Right 3 * \E | - - -
17112: # MC Media Copy \E [ Ps i 0 - - (S)
17113: # MW Message Waiting \E U - - -
17114: # NAK Negative Acknowledge * ^U - * -
17115: # NBH No Break Here * \E C - - -
17116: # NEL Next Line \E E - FE nel (D)
17117: # NP Next Page \E [ Pn U 1 eF -
17118: # NUL Null * ^@ - - -
17119: # OSC Operating System Command \E ] - Delim -
17120: # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
17121: # PFS Page Format Selection * \E Pn SPC J 0 - -
17122: # PLD Partial Line Down \E K - FE - (T)
17123: # PLU Partial Line Up \E L - FE - (U)
17124: # PM Privacy Message \E ^ - Delim -
17125: # PP Preceding Page \E [ Pn V 1 eF -
17126: # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
17127: # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
17128: # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
17129: # PTX Parallel Texts * \E [ \ - - -
17130: # PU1 Private Use 1 \E Q - - -
17131: # PU2 Private Use 2 \E R - - -
17132: # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
17133: # REP Repeat Char or Control \E [ Pn b 1 - rep
17134: # RI Reverse Index \E M - FE - (V)
17135: # RIS Reset to Initial State \E c - Fs -
17136: # RM Reset Mode * \E [ Ps l - - - (W)
17137: # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
17138: # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
17139: # SCI Single-Char Introducer \E Z - - -
17140: # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
17141: # SCS Set Char. Spacing * \E [ Pn SPC g - - -
17142: # SD Scroll Down \E [ Pn T 1 eF rin
17143: # SDS Start Directed String * \E [ Pn ] 1 - -
17144: # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
17145: # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
17146: # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
17147: # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
17148: # SI Shift In ^O - - - (P)
17149: # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
17150: # SL Scroll Left \E [ Pn SPC @ 1 eF -
17151: # SLH Set Line Home * \E [ Pn SPC U - - -
17152: # SLL Set Line Limit * \E [ Pn SPC V - - -
17153: # SLS Set Line Spacing * \E [ Pn SPC h - - -
17154: # SM Select Mode \E [ Ps h none - - (W)
17155: # SO Shift Out ^N - - - (Q)
17156: # SOH Start Of Heading * ^A - - -
17157: # SOS Start of String * \E X - - -
17158: # SPA Start of Protected Area \E V - - - (Z)
17159: # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
17160: # SPH Set Page Home * \E [ Ps SPC G - - -
17161: # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
17162: # SPL Set Page Limit * \E [ Ps SPC j - - -
17163: # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
17164: # SR Scroll Right \E [ Pn SPC A 1 eF -
17165: # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
17166: # SRS Start Reversed String * \E [ Ps [ 0 - -
17167: # SSA Start of Selected Area \E F - - -
17168: # SSU Select Size Unit * \E [ Pn SPC I 0 - -
17169: # SSW Set Space Width * \E [ Pn SPC [ none - -
17170: # SS2 Single Shift 2 (G2 set) \E N - Intro -
17171: # SS3 Single Shift 3 (G3 set) \E O - Intro -
17172: # ST String Terminator \E \ - Delim -
17173: # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
17174: # STS Set Transmit State \E S - - -
17175: # STX Start pf Text * ^B - - -
17176: # SU Scroll Up \E [ Pn S 1 eF indn
17177: # SUB Substitute * ^Z - - -
17178: # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
17179: # SYN Synchronous Idle * ^F - - -
17180: # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
17181: # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
17182: # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
17183: # TBC Tab Clear \E [ Ps g 0 FE tbc
17184: # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
17185: # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
17186: # TSS Thin Space Specification \E [ Pn SC E none FE -
17187: # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
17188: # VPB Line Position Backward * \E [ Pn k 1 FE -
17189: # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
17190: # VT Vertical Tabulation * ^K - FE -
17191: # VTS Vertical Tabulation Set \E J - FE -
17192: #
17193: # ---------------------------------------------------------------------------
17194: #
17195: # Notes:
17196: #
17197: # Some control characters are listed in the ECMA-48 standard without
17198: # being assigned functions relevant to terminal control there (they
17199: # referred to other standards such as ISO 1745 or ECMA-35). They are listed
17200: # here anyway for completeness.
17201: #
17202: # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
17203: #
17204: # (B) There seems to be some confusion abroad between CHA and HPA. Most
17205: # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
17206: # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
17207: # preserved the CHA abbreviation.
17208: #
17209: # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
17210: # Occasionally (as on, for example, certain HP terminals) this has the HTJ
17211: # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
17212: # CHT abbreviation.
17213: #
17214: # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
17215: #
17216: # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
17217: # abbreviation.
17218: #
17219: # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
17220: # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
17221: # 5 = clear all char tabs, 6 = clear all line tabs.
17222: #
17223: # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
17224: # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
17225: # Position Absolute" but retains the HVP abbreviation.
17226: #
17227: # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
17228: # abbreviation.
17229: #
17230: # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
17231: # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
17232: # DSR, 6 = request CPR response.
17233: #
17234: # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
17235: # 1 = clear from beginning, 2 = clear.
17236: #
17237: # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
17238: #
17239: # (L) The GSM parameters are vertical and horizontal parameters to scale by.
17240: #
17241: # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
17242: # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
17243: # Position Relative" but retains the HPR abbreviation.
17244: #
17245: # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
17246: # abbreviation.
17247: #
17248: # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
17249: # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
17250: # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
17251: # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
17252: # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
17253: # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
17254: # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
17255: # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
17256: # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
17257: # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
17258: # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
17259: # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
17260: # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
17261: # 61-65 = variable highlights for ideograms.
17262: #
17263: # (P) SI is also called LSO, Locking Shift Zero.
17264: #
17265: # (Q) SI is also called LS1, Locking Shift One.
17266: #
17267: # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
17268: # use CUD for this function and ignore VPR. ECMA calls it `Line Position
17269: # Absolute' but retains the VPA abbreviation.
17270: #
17271: # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
17272: # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
17273: # from secondary aux device, 4 = stop relay to primary aux device, 5 =
17274: # start relay to primary aux device, 6 = stop relay to secondary aux device,
17275: # 7 = start relay to secondary aux device.
17276: #
17277: # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
17278: # abbreviation.
17279: #
17280: # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLD
17281: # abbreviation.
17282: #
17283: # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
17284: #
17285: # (W) RM/SM modes are as follows: 1 = Guarder Area Transfer Mode (GATM),
17286: # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
17287: # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
17288: # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
17289: # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
17290: # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
17291: # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
17292: # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
17293: # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
17294: # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
17295: # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
17296: # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
17297: # from ECMA-48's 5th edition but are listed here for reference.
17298: #
17299: # (X) Select Alternate Presentation Variants is used only for non-Latin
17300: # alphabets.
17301: #
17302: # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
17303: #
17304: # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
17305: # abbreviation.
17306: #
17307: # ---------------------------------------------------------------------------
17308: #
17309: # Abbreviations:
17310: #
17311: # Intro an Introducer of some kind of defined sequence; the normal 7-bit
17312: # X3.64 Control Sequence Introducer is the two characters "Escape ["
17313: #
17314: # Delim a Delimiter
17315: #
17316: # x/y identifies a character by position in the ASCII table (column/row)
17317: #
17318: # eF editor function (see explanation)
17319: #
17320: # FE format effector (see explanation)
17321: #
17322: # F is a Final character in
17323: # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
17324: # a control sequence (F from 4/0 to 7/14)
17325: #
17326: # Gs is a graphic character appearing in strings (Gs ranges from
17327: # 2/0 to 7/14) in the ASCII table
17328: #
17329: # Ce is a control represented as a single bit combination in the C1 set
17330: # of controls in an 8-bit character set
17331: #
17332: # C0 the familiar set of 7-bit ASCII control characters
17333: #
17334: # C1 roughly, the set of control chars available only in 8-bit systems.
17335: # This is too complicated to explain fully here, so read Jim Fleming's
17336: # article in the February 1983 BYTE, especially pages 214 through 224.
17337: #
17338: # Fe is a Final character of a 2-character Escape sequence that has an
17339: # equivalent representation in an 8-bit environment as a Ce-type
17340: # (Fe ranges from 4/0 to 5/15)
17341: #
17342: # Fs is a Final character of a 2-character Escape sequence that is
17343: # standardized internationally with identical representation in 7-bit
17344: # and 8-bit environments and is independent of the currently
17345: # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
17346: #
17347: # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
17348: # ASCII table
17349: #
17350: # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
17351: # table
17352: #
17353: # Pn is a numeric parameter in a control sequence, a string of zero or
17354: # more characters ranging from 3/0 to 3/9 in the ASCII table
17355: #
17356: # Ps is a variable number of selective parameters in a control sequence
17357: # with each selective parameter separated from the other by the code
17358: # 3/11 (which usually represents a semicolon); Ps ranges from
17359: # 3/0 to 3/9 and includes 3/11
17360: #
17361: # * Not relevant to terminal control, listed for completeness only.
17362: #
17363: # Format Effectors versus Editor Functions
17364: #
17365: # A format effector specifies how following output is to be displayed.
17366: # An editor function allows you to modify the display. Informally
17367: # format effectors may be destructive; format effectors should not be.
17368: #
17369: # For instance, a format effector that moves the "active position" (the
17370: # cursor or equivalent) one space to the left would be useful when you want to
17371: # create an overstrike, a compound character made of two standard characters
17372: # overlaid. Control-H, the Backspace character, is actually supposed to be a
17373: # format effector, so you can do this. But many systems use it in a
17374: # nonstandard fashion, as an editor function, deleting the character to the
17375: # left of the cursor and moving the cursor left. When Control-H is assumed to
17376: # be an editor function, you cannot predict whether its use will create an
17377: # overstrike unless you also know whether the output device is in an "insert
17378: # mode" or an "overwrite mode". When Control-H is used as a format effector,
17379: # its effect can always be predicted. The familiar characters carriage
17380: # return, linefeed, formfeed, etc., are defined as format effectors.
17381: #
17382: # NOTES ON THE DEC VT100 IMPLEMENTATION
17383: #
17384: # Control sequences implemented in the VT100 are as follows:
17385: #
17386: # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
17387: # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
17388: #
17389: # plus several private DEC commands.
17390: #
17391: # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
17392: #
17393: # Erase from cursor to end of line Esc [ 0 K or Esc [ K
17394: # Erase from beginning of line to cursor Esc [ 1 K
17395: # Erase line containing cursor Esc [ 2 K
17396: # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
17397: # Erase from beginning of screen to cursor Esc [ 1 J
17398: # Erase entire screen Esc [ 2 J
17399: #
17400: # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
17401: # Esc [ 2 J, but this is wrong; the default is 0.
17402: #
17403: # The VT100 responds to receiving the DA (Device Attributes) control
17404: #
17405: # Esc [ c (or Esc [ 0 c)
17406: #
17407: # by transmitting the sequence
17408: #
17409: # Esc [ ? l ; Ps c
17410: #
17411: # where Ps is a character that describes installed options.
17412: #
17413: # The VT100's cursor location can be read with the DSR (Device Status
17414: # Report) control
17415: #
17416: # Esc [ 6 n
17417: #
17418: # The VT100 reports by transmitting the CPR sequence
17419: #
17420: # Esc [ Pl ; Pc R
17421: #
17422: # where Pl is the line number and Pc is the column number (in decimal).
17423: #
17424: # The specification for the DEC VT100 is document EK-VT100-UG-003.
17425:
17426: #### ANSI.SYS
17427: #
17428: # Here is a description of the color and attribute controls supported in the
17429: # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
17430: # terminal emulators for Intel boxes obey these. They are a proper subset
17431: # of the ECMA-48 escapes.
17432: #
17433: # 0 all attributes off
17434: # 1 foreground bright
17435: # 4 underscore on
17436: # 5 blink on/background bright (not reliable with brown)
17437: # 7 reverse-video
17438: # 8 set blank (non-display)
17439: # 10 set primary font
17440: # 11 set first alternate font (on PCs, display ROM characters 1-31)
17441: # 12 set second alternate font (on PCs, display IBM high-half chars)
17442: #
17443: # Color attribute sets
17444: # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
17445: # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
17446: # Bright black becomes gray. Bright brown becomes yellow,
17447: # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
17448: #
17449: # * If the 5 attribute is on and you set a background color (40-47) it is
17450: # supposed to enable bright background.
17451: #
17452: # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
17453: # when you try to set a "bright brown" (yellow) background with attribute
17454: # 5 (you get a blinking yellow foreground instead). A few displays
17455: # (including the System V console) support an attribute 6 that undoes this
17456: # braindamage (this is required by iBCS2).
17457: #
17458: # * Some older versions of ANSI.SYS have a bug that causes thems to require
17459: # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
17460: # compatible.)
17461:
17462: #### Intel Binary Compatibility Standard
17463: #
17464: # For comparison, here are the capabilities implied by the Intel Binary
17465: # Compatibility Standard for UNIX systems (Intel order number 468366-001).
17466: # These recommendations are optional. IBCS2 allows the leading escape to
17467: # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
17468: # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
17469: # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
17470: # terminfo entry are followed with the corresponding capability in parens:
17471: #
17472: # CSI <n>k disable (n=0) or enable (n=1) keyclick
17473: # CSI 2h lock keyboard
17474: # CSI 2i send screen as input
17475: # CSI 2l unlock keyboard
17476: # CSI 6m enable background color intensity
17477: # CSI <0-2>c reserved
17478: # CSI <0-59>m select graphic rendition
17479: # CSI <n>;<m>H (cup) cursor to line n and column m
17480: # CSI <n>;<m>f cursor to line n and column m
17481: # CSI <n>@ (ich) insert characters
17482: # CSI <n>A (cuu) cursor up n lines
17483: # CSI <n>B (cud) cursor down n lines
17484: # CSI <n>C (cuu) cursor right n characters
17485: # CSI <n>D (cud) cursor left n characters
17486: # CSI <n>E cursor down n lines and in first column
17487: # CSI <n>F cursor up n lines and in first column
17488: # CSI <n>G (hpa) position cursor at column n-1
17489: # CSI <n>J (ed) erase in display
17490: # CSI <n>K (el) erase in line
17491: # CSI <n>L (il) insert line(s)
17492: # CSI <n>P (dch) delete characters
17493: # CSI <n>S (indn) scroll up n lines
17494: # CSI <n>T (rin) scroll down n lines
17495: # CSI <n>X (ech) erase characters
17496: # CSI <n>Z (cbt) back up n tab stops
17497: # CSI <n>` cursor to column n on line
17498: # CSI <n>a (cuu) cursor right n characters
17499: # CSI <n>d (vpa) cursor to line n
17500: # CSI <n>e cursor down n lines and in first column
17501: # CSI <n>g (cbt) clear all tabs
17502: # CSI <n>z make virtual terminal n active
17503: # CSI ?7h (smam) turn automargin on
17504: # CSI ?7l (rmam) turn automargin off
17505: # CSI s save cursor position
17506: # CSI u restore cursor position to saved value
17507: # CSI =<c>A set overscan color
17508: # CSI =<c>F set normal foreground color
17509: # CSI =<c>G set normal background color
17510: # CSI =<c>H set reverse foreground color
17511: # CSI =<c>I set reverse foreground color
17512: # CSI =<c>J set graphic foreground color
17513: # CSI =<c>K set graphic foreground color
17514: # CSI =<n>g (dispc) display n from alternate graphics character set
17515: # CSI =<p>;<d>B set bell parameters
17516: # CSI =<s>;<e>C set cursor parameters
17517: # CSI =<x>D enable/disable intensity of background color
17518: # CSI =<x>E set/clear blink vs. bold background
17519: # CSI 7 (sc) (sc) save cursor position
17520: # CSI 8 (rc) (rc) restore cursor position to saved value
17521: # CSI H (hts) (hts) set tab stop
17522: # CSI Q<n><string> define function key string
17523: # (string must begin and end with delimiter char)
17524: # CSI c (clear) clear screen
17525: #
17526: # The lack of any specification for attributes in SGR (among other things)
17527: # makes this a wretchedly weak standard. The table above is literally
17528: # everything iBSC2 has to say about terminal escape sequences; there is
17529: # no further discussion of their meaning or how to set the parameters
17530: # in these sequences at all.
17531: #
17532:
17533: ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
17534: #
17535: # The historical termcap file entries were written primarily in 4.4BSD termcap.
17536: # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
17537: # with the extension names chosen for compatibility with the termcap names
17538: # assigned in System V terminfo. There are some variant extension sets out
17539: # there. We try to describe them here.
17540: #
17541: # XENIX extensions:
17542: #
17543: # The XENIX extensions include a set of function-key capabilities as follows:
17544: #
17545: # code XENIX variable name terminfo name name clashes?
17546: # ---- ------------------- ------------- -----------------------
17547: # CL key_char_left
17548: # CR key_char_right
17549: # CW key_change_window create_window
17550: # EN key_end kend
17551: # HM key_home khome
17552: # HP ??
17553: # LD key_delete_line kdl1
17554: # LF key_linefeed label_off
17555: # NU key_next_unlocked_cell
17556: # PD key_page_down knp
17557: # PL ??
17558: # PN start_print mc5
17559: # PR ??
17560: # PS stop_print mc4
17561: # PU key_page_up kpp pulse
17562: # RC key_recalc remove_clock
17563: # RF key_toggle_ref req_for_input
17564: # RT key_return kent
17565: # UP key_up_arrow kcuu1 parm_up_cursor
17566: # WL key_word_left
17567: # WR key_word_right
17568: #
17569: # The XENIX extensions also include the following character-set and highlight
17570: # capabilities:
17571: #
17572: # XENIX terminfo function
17573: # ----- -------- ------------------------------
17574: # GS smacs start alternate character set
17575: # GE rmacs end alternate character set
17576: # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
17577: # bo blink begin blink (not used in /etc/termcap)
17578: # be end blink (not used in /etc/termcap)
17579: # bb blink glitch (not used in /etc/termcap)
17580: # it dim begin dim (not used in /etc/termcap)
17581: # ie end dim (not used in /etc/termcap)
17582: # ig dim glitch (not used in /etc/termcap)
17583: #
17584: # Finally, XENIX also used the following forms-drawing capabilities:
17585: #
17586: # single double type ASCII approximation
17587: # ------ ------ ------------- -------------------
17588: # GV Gv vertical line |
17589: # GH Gv horizontal line - _
17590: # G1 G5 top right corner _ |
17591: # G2 G6 top left corner |
17592: # G3 G7 bottom left corner |_
17593: # G4 G8 bottom right corner _|
17594: # GD Gd down-tick character T
17595: # GL Gl left-tick character -|
17596: # GR Gr right-tick character |-
17597: # GC Gc middle intersection -|-
17598: # GU Gu up-tick character _|_
17599: #
17600: # These were invented to take advantage of the IBM PC ROM character set. One
17601: # can compose an acsc string from the single-width characters as follows
17602: # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
17603: # When translating a termcap file, ncurses tic will do this automatically.
17604: # The double forms characters don't fit the SVr4 terminfo model.
17605: #
17606: # AT&T Extensions:
17607: #
17608: # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
17609: # nonstandard capabilities. Its signature is the KM capability, used to name
17610: # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
17611: # set. Comments in the original, and a little cross-checking with other AT&T
17612: # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
17613: # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
17614: # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
17615: # cursor invisible), and CV=:ve: (make cursor normal).
17616: #
17617: # HP Extensions
17618: #
17619: # The HP library (as of mid-1995, their term.h file version 70.1) appears to
17620: # have the System V capabilities up to SVr1 level. After that, it supports
17621: # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
17622: # :mu: capabilities. After that, it supports caps plab_norm, label_on,
17623: # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
17624: # HP binary format incompatible with SVr4's.
17625: #
17626: # IBM Extensions
17627: #
17628: # There is a set of nonstandard terminfos used by IBM's AIX operating system.
17629: # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
17630: # capabilities following prtr_non with the following special capabilties:
17631: # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
17632: # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
17633: # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
17634: # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
17635: # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
17636: # renamed (to kcbt and kslt). The places in the box[12] capabilities
17637: # correspond to acsc chars, here is the mapping:
17638: #
17639: # box1[0] = ACS_ULCORNER
17640: # box1[1] = ACS_HLINE
17641: # box1[2] = ACS_URCORNER
17642: # box1[3] = ACS_VLINE
17643: # box1[4] = ACS_LRCORNER
17644: # box1[5] = ACS_LLCORNER
17645: # box1[6] = ACS_TTEE
17646: # box1[7] = ACS_RTEE
17647: # box1[8] = ACS_BTEE
17648: # box1[9] = ACS_LTEE
17649: # box1[10] = ACS_PLUS
17650: #
17651: # The box2 characters are the double-line versions of these forms graphics.
17652: # The AIX binary terminfo format is incompatible with SVr4's.
17653: #
17654: # Iris console extensions:
17655: #
17656: # HS is half-intensity start; HE is half-intensity end
17657: # CT is color terminal type (for Curses & rogue)
17658: # CP is color change escape sequence
17659: # CZ are color names (for Curses & rogue)
17660: #
17661: # The ncurses tic utility recognizes HS as an alias for mh <dim>.
17662: #
17663: # TC Extensions:
17664: #
17665: # There is a set of extended termcaps associated with something
17666: # called the "Terminal Control" or TC package created by MainStream Systems,
17667: # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
17668: # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
17669: # that flags color terminals.
17670: #
17671: ######## CHANGE HISTORY
17672: #
17673: # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
17674: # Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
17675: # project.
17676: #
17677: # This file contains all the capability information present in John Kunze's
17678: # last version of the termcap master file, except as noted in the change
17679: # comments at end of file. Some information about very ancient obsolete
17680: # capabilities has been moved to comments. Some all-numeric names of older
17681: # terminals have been retired.
17682: #
17683: # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
17684: # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
17685: # used by BSD curses.
17686: #
17687: # The 9.1.0 version of this file was translated from my lightly-edited copy of
17688: # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
17689: # the purpose. Unless the ncurses tic implementation and the Lisp code were
17690: # making perfectly synchronized mistakes which I then failed to catch by
17691: # eyeball, the translation was correct and perfectly information-preserving.
17692: #
17693: # Major version number bumps correspond to major version changes in ncurses.
17694: #
17695: # Here is a log of the changes since then:
17696: #
17697: # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
17698: # * First terminfo master translated from 8.3.
17699: # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
17700: # * Replaced Wyse entries with updated entries supplied by vendor.
17701: #
17702: # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
17703: # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
17704: # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
17705: # * Better XENIX keycap translation. Describe TC termcaps.
17706: # * Contact and history info supplied by Qume.
17707: # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
17708: # * Raided the Shuford FTP site for recent termcaps/terminfos.
17709: # * Added information on X3.64 and VT100 standard escape sequences.
17710: # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
17711: # * Added a correct X11R6 xterm entry.
17712: # * Fixed terminfo translations of padding.
17713: # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
17714: # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
17715: # * Added u6/u7/u8/u9 capabilities.
17716: # * Added PCVT entry.
17717: # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
17718: # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
17719: # to use reverse-video standout so Emacs will look right.
17720: # * Added el1 capability to ansi.
17721: # * Added smacs/rmacs to ansi.sys.
17722: #
17723: # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
17724: # * New mt70 entry.
17725: # * Added COPYRIGHTS AND OTHER DELUSIONS.
17726: # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
17727: # smartvid & smarterm, ampex 175 & 219 & 232,
17728: # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
17729: # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
17730: # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
17731: # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
17732: # * Replaced the Perkin-Elmer entries with vendor's official ones.
17733: # * Restored the old minimal-ansi entry, luna needs it.
17734: # * Fixed some incorrect ip and proportional-padding translations.
17735: # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
17736: # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
17737: # * Make the xterm entry 65 lines again; create xterm25 and xterm24
17738: # to force a particular height.
17739: # * Added beehive4 and reorganized other Harris entries.
17740: # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
17741: # * Merged in DEC's official entries for its terminals. The only old
17742: # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
17743: # * Replaced the translated BBN Bitgraph entries with purpose-built
17744: # ones from AT&T's SVr3.
17745: # * Replaced the AT&T entries with AT&T's official terminfos.
17746: # * Added teleray 16, vc415, cops10.
17747: # * Merged in many individual capabilities from SCO terminfo files.
17748: # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
17749: # * Typo fixes.
17750: # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
17751: # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
17752: # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
17753: # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
17754: # simterm, citoh and variants.
17755: # * Replaced sol entry with sol1 and sol2.
17756: # * Replaced Qume QVT and Freedom-series entries with purpose-built
17757: # terminfo entries.
17758: # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
17759: # and dg200 entries using caps from from SCO.
17760: # * Added the usual set of function-key mappings to ANSI entry.
17761: # * Corrected xterm's function-key capabilities.
17762: # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
17763: # * Fix in xterm entry, cub and cud are not reliable under X11R6.
17764: # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
17765: # * Fix in xterm entry, get the arrow keys right.
17766: # * Change some \0 escapes to \200.
17767: # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
17768: # * Added apple (Videx card), adm1a, oadm31.
17769: # * Fixed malformed ampex csr.
17770: # * Fixed act4, cyb110; they had old-style prefix padding left in.
17771: # * Changed mandatory to advisory padding in many entries.
17772: # * Replaced HP entries up to hpsub with purpose-built ones.
17773: # * Blank rmir/smir/rmdc/smdc capabilities removed.
17774: # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
17775: # 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
17776: # * Replaced the Ann Arbor entries with SCO's, the init strings are
17777: # more efficient (but the entries otherwise identical).
17778: # * Added dg211 from Shuford archive.
17779: # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
17780: # adm42-nl, pc52, gs6300, xerox820, uts30.
17781: # * Pull SCO's padding into vi200 entry.
17782: # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
17783: # entries merged in from SCO's descriptions.
17784: # * Fixed old-style prefix padding on zen50, h1500.
17785: # * Moved old superbee entry to superbee-xsb, pulled in new superbee
17786: # entry from SCO's description.
17787: # * Reorganized the special entries.
17788: # * Added lm#0 to cbunix and virtual entries.
17789: #
17790: # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
17791: # * Restored cdc456tst.
17792: # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
17793: # * Added megatek, beacon, microkit.
17794: # * Freeze for ncurses-1.9 release.
17795: # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
17796: # * Added historical data for TAB.
17797: # * Comment fixes from David MacKenzie.
17798: # * Added the new BSDI pc3 entry.
17799: # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
17800: # * A change in the tic -C logic now ensures that all entries in
17801: # the termcap translation will fit in < 1024 bytes.
17802: # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
17803: # from GNU termcap file. This merges in all their local information.
17804: # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
17805: # * Changed tic -C logic to dump all capabilities used by GNU termcap.
17806: # * Added warnings about entries with long translations (restoring
17807: # all the GNU termcaps pushes a few over the edge).
17808: # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
17809: # * Yet another tic change, and a couple of entry tweaks, to reduce the
17810: # number of long (> 1024) termcap translations back to 0.
17811: #
17812: # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
17813: # * Added kf13-kf20 to Linux entry.
17814: # * Regularize Prime terminal names.
17815: # * Historical data on Synertek.
17816: # * Freeze for ncurses-1.9.1.
17817: # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
17818: # * Added true xterm-color entry, renamed djm's pseudo-color entry.
17819: # * Eliminate whitespace in short name fields, this tanks some scripts.
17820: # * Name field changes to shorten some long entries.
17821: # * Termcap translation now automatically generates empty rmir/smir
17822: # when ich1/ich is present (copes with an ancient vi bug).
17823: # * Added `screen' entries from FSF's screen-3.6.2.
17824: # * Added linux-nic and xterm-nic entries.
17825: # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
17826: # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
17827: # eliminating some special-case code in ncurses.
17828: #
17829: # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
17830: # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
17831: # that captures everything unique from it.
17832: # * Added reorder script generator.
17833: # * Freeze for ncurses 1.9.2 release.
17834: # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
17835: # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
17836: # * Added Olaf Siebert's corrections for adm12.
17837: # * ansi-pc-color now includes the colors and pairs caps, so that
17838: # entries which use it will inherit them automatically.
17839: # * The linux entry can now recognize the center (keypad 5) key.
17840: # * Removed some junk that found its way into Linux acsc.
17841: #
17842: # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
17843: # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
17844: # * xterm doesn't try to use application keypad mode any more.
17845: # * Freeze for ncurses-1.9.3 release.
17846: # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
17847: # * Added corrected sun entry from vendor.
17848: # * Added csr capability to linux entry.
17849: # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
17850: # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
17851: # * Some commented-out caps in long entries come back in, my code
17852: # for computing string-table lengths had a bug in it.
17853: # * pcansi series modified to fit comm-program reality better.
17854: # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
17855: # * BSD/OS actually ships the ibmpc3 bold entry as its console.
17856: # * Correct some bad aliases in the pcansi series
17857: # * Added entry for QNX console.
17858: # * Clean up duplicate long names for use with 4.4 library.
17859: # * Change vt100 standout to be normal reverse vide, not bright reverse;
17860: # this makes the Emacs status line look better.
17861: # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
17862: # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
17863: # * Minor surgery, mostly on name strings, to shorten termcap version.
17864: #
17865: # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
17866: # * Added dec-vt100 for use with the EWAN emulator.
17867: # * Added kmous to xterm for use with xterm's mouse-tracking facility.
17868: # * Freeze for 1.9.5 alpha release.
17869: # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
17870: # * Changed xterm lines to 24, the X11R6 default.
17871: # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
17872: # * Added 7 newly discovered, undocumented acsc characters to linux
17873: # entry (the pryz{|} characters).
17874: # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
17875: # * Correct two typos in the xterm entries introduced in 9.9.1.
17876: # * I finally figured out how to translate ko capabilities. Done.
17877: # * Added tvi921 entries from Tim Theisen.
17878: # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
17879: # * Removed mystery tec entry, it was neither interesting nor useful.
17880: # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
17881: # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
17882: # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
17883: # by making them relative to use capabilities
17884: # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
17885: # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
17886: # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
17887: # ampex80,
17888: # * Translate all home=\E[;H capabilities to home=\E[H, they're
17889: # equivalent.
17890: # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
17891: # vt100 and ANSI-like terminals.
17892: # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
17893: # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
17894: # does this now, too.
17895: # * fviewpoint is gone, it duplicated screwpoint.
17896: # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
17897: # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
17898: # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
17899: # The UW vi50 replaces the old one, which becomes vi50adm,
17900: # * No more embedded commas in name fields.
17901: #
17902: # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
17903: # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
17904: # * Introduced klone+* entries for describing Intel-console behavior.
17905: # * Linux kbs is default-mapped to delete for some brain-dead reason.
17906: # * -nsl -> -ns. The -pp syntax is obsolete.
17907: # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
17908: # * Make xterm entry do application-keypad mode again. I got complaints
17909: # that it was messing up someone's 3270 emulator.
17910: # * Added some longname fields in order to avoid warning messages from
17911: # older tic implementations.
1.11 millert 17912: # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
1.1 millert 17913: # it! (This gives us pi, greater than, less than, and a few more.)
17914: # * Freeze for ncurses-1.9.6 release.
17915: # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
17916: # * Add xon to a number of console entries, they're memory-mapped and
17917: # don't need padding.
17918: # * Correct the use dependencies in the ansi series.
17919: # * Hand-translate more XENIX capabilities.
17920: # * Added hpterm entry for HP's X terminal emulator.
17921: # * Added aixterm entries.
17922: # * Shortened four names so everything fits in 14 chars.
17923: #
17924: # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
17925: # * Added ibcs2 entry and info on iBCS2 standard.
17926: # * Corrected hpa/vpa in linux entry. They still fail the worm test.
17927: # * We can handle the HP meml/memu capability now.
17928: # * Added smacs to klone entries, just as documentation.
17929: # * Carrected ansi.sys and cit-500 entries.
17930: # * Added z39, vt320-k311, v220c, and avatar entries.
17931: # * Make pcansi use the ansi.sys invis capability.
17932: # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
17933: # tvi925, tvi950, dt80, ncr7900i, h19.
17934: # * X3.64 has been withdrawn, change some references.
17935: # * Removed function keys from ansi-m entry.
17936: # * Corrected ansi.sys entry.
17937: # * Freeze for ncurses-1.9.7 release.
17938: # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
17939: # * Added rmam/smam capabilities to many entries based on init strings.
17940: # * Added correct hpa/vpa to linux.
17941: # * Reduced several entries relative to vt52.
17942: # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
17943: # * Exiled some utterly unidentifiable custom and homebrew types to the
17944: # UFO file; also, obsolete small-screen hardware; also, entries which
17945: # look flat-out incorrect, garbled, or redundant. These include the
17946: # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
17947: # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
17948: # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
17949: # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
17950: # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
17951: # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
17952: # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
17953: # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
17954: # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
17955: # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
17956: # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
17957: # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
17958: # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
17959: # * Corrected pcvt25h as suggested by Brian C. Grayson
17960: # <bgrayson@pine.ece.utexas.edu>.
17961: # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
17962: # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
17963: # * Added kent=\EOM to xterm entry.
17964: #
17965: # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
17966: # * Corrected gigi entry.
17967: # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
17968: # bad hpa/vpa capabilities.
17969: # * Corrected flash strings to have a uniform delay of .2 sec. No
17970: # more speed-dependent NUL-padding!
17971: # * terminfo capabilities in comments bracketed with <>.
17972: # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
17973: # * Replaced pcvt with the 3.31 pcvt entries.
17974: # * Freeze for 1.9.7a.
17975: # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
17976: # * Added emu entry from the X11R6 contrib tape sources.
17977: #
17978: # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
17979: # * Improved iris-ansi and sun entries.
17980: # * More flash string improvements.
17981: # * Corrected wy160 & wy160 as suggested by Robert Dunn
17982: # * Added dim to at386.
17983: # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
17984: # he's ready to start using the termcap generated from this one.
17985: # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
17986: # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
17987: # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
17988: # att610, att620, att630,
17989: # * Changed hazeltine name prefix from h to hz.
17990: # * Sent t500 to the UFI file.
17991: # * I think we've sucked all the juice out of BSDI's termcap file now.
17992: # * Freeze for ncurses 1.9.8 release
17993: # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
17994: # * Unfreeze, linux kbs needed to be fixed.
17995: # * Tim Theisen pinned down a bug in the DMD firmware.
17996: # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
17997: # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
17998: # (The broken ones had been shadowed by sgr.)
17999: # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
18000: # * Added documentation on ECMA-48 standard.
18001: # * New Amiga entry.
18002: # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
18003: # * More ECMA-48 stuff
18004: # * Corrected typo in minix entry, added pc-minix.
18005: # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
18006: # * Added rxvt entry.
18007: # * Added 1.3.x color-change capabilities to linux entry.
18008: # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
18009: # * Corrected rxvt entry khome/kend.
18010: # * Corrected linux color change capabilities.
18011: # * NeXT entries from Dave Wetzel.
18012: # * Cleaned up if and rf file names (all in /usr/share now).
18013: # * Changed linux op capability to avoid screwing up a background color
18014: # pair set by setterm.
18015: # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
18016: # * Added xterm-sun.
18017: # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
18018: # * Added visa50.
18019: #
18020: # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
18021: # * Another sweep through the Shuford archive looking for new info.
18022: # * Added dg100 alias to dg6053 based on a comp.terminals posting.
18023: # * Added st52 from Per Persson.
18024: # * Added eterm from the GNU Emacs 19.30 distribution.
18025: # * Freeze for 1.9.9.
18026: # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
18027: # * FreeBSD console entries from Andrew Chernov.
18028: # * Removed duplicate Atari st52 name.
18029: # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
18030: # * xterm doesn't actually have ACS_BLOCK.
18031: # * Change klone+color setf/setb to simpler forms that can be
18032: # translated into termcap.
18033: # * Added xterm1.
18034: # * Removed mechanically-generated junk capabilities from cons* entries.
18035: # * Added color support to bsdos.
18036: # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
18037: # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
18038: # * Created ecma+color, linux can use it. Also added ech to linux.
18039: # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
18040: # * Add descriptions to FreeBSD console entries. Also shorten
18041: # some aliases to <= 14 chars for portability.
18042: # * Added x68k console
18043: # * Added OTbs to several VT-series entries.
18044: # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
18045: # * screen entry update for 3.7.1 from Michael Alan Dorfman.
18046: # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
18047: # * kterm correction due to Kenji Rikitake.
18048: # * ACS correction in vt320-kll due to Phillippe De Muyter.
18049: # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
18050: # * Sun console entry correction from J.T. Conklin.
18051: # * Changed all DEC VT300 and up terminals to use VT300 tab set
18052: # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
18053: # * Added smul to linux entry (we never noticed it was missing
18054: # because of sgr!).
18055: # * Added rmln to hp+labels (deduced from other HP entries).
18056: # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
18057: # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
18058: # * Corrected vt220 acsc.
18059: # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
18060: # this corresponds to reality and helps prevent some tic warnings.
18061: # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
18062: # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
18063: # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
18064: # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
18065: # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
18066: # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
18067: # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
18068: # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
18069: # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
18070: # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
18071: # ifmr, v3220, wy100q, tandem653, ibmaed.
18072: # * Added DWK terminal description.
18073: # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
18074: # * Many entries now have highlights inherited from adm+sgr.
18075: # * xterm entry now corresponds to XFree86 3.1.2E, with color.
18076: # * xtitle and xtitle-twm enable access to the X status line.
18077: # * Added linux-1.3.6 color palette caps in conventional format.
18078: # * Added adm1178 terminal.
18079: # * Move fos and apollo terminals to obsolete category.
18080: # * Aha! The BRL terminals file told us what the Iris extensions mean.
18081: # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
18082: # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
18083: # cit500, adm11.
18084: # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
18085: # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
18086: # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
18087: # * Corrected, from BRL termcap file: vi50.
18088: # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
18089: # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
18090: # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
18091: # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
18092: # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
18093: # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
18094: # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
18095: # * Paired-attribute fixes to various terminals.
18096: # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
18097: # * xterm entry corrections from Thomas Dickey.
18098: # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
18099: # * Added t916 entry, translated from a termcap in SCO's support area.
18100: # * New qnx entry from Michael Hunter.
18101: # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
18102: # * Added hpex2 from Ville Sulko.
18103: # * Fixed a bug that ran the qnx and pcvtXX together.
18104: # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
18105: # * Added dtterm entry from Solaris CDE.
18106: # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
18107: # * corrected pairs#8 typo in dtterm entry.
18108: # * added tvi9065.
18109: # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
18110: # * updated xterm entry to cover 3.1.2E's new features.
18111: # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
18112: # * Added new minix entry
18113: # * Removed aliases of the form ^[0-9]* for obsolete terminals.
18114: # * Commented out linux-old, nobody's using pre-1.2 kernels now.
18115: # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
18116: # * Added Prism entries and kt7ix.
18117: # * Caution notes about EWAN and tabset files.
18118: # * Changed /usr/lib/tabset -> /usr/share/tabset.
18119: # * Added acsc/rmacs/smacs to vt52.
18120: # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
18121: # * Merged in Thomas Dickey's reorganization of the xterm entries;
18122: # added technical corrections to avoid warning messages.
18123: # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
18124: # * Added rmso=\E[27m in Linux entry.
18125: # * Added koi8-r support for Linux console.
18126: # * Replace xterm entries with canonical ones from XFree86 3.2.
18127: # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
18128: # * Added color_xterm from Jacob Mandelson
18129: # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
18130: # * Back off the xterm entry to use r6 as a base.
18131: # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
18132: # * Added dec-vt220 at Adrian Garside's request.
18133: # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
18134: # * Replaced minitel-2 entry.
18135: # * Added MGR, ansi-nt.
18136: # * Minor corrections to xterm entries.
18137: # * Replaced EWAN telnet entry.
18138: # * Dropped the reorder script generator. It was a fossil.
18139: # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
18140: # * Thorsten Lockert added termcap `bs' to a lot of types, working from
18141: # the 4.4BSD Lite2 file.
18142: # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
18143: # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
18144: # * Updated iris-ansi; corrected vt102-w.
18145: # * Switch base xterm entry to 3.3 level.
18146: # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
18147: # * Added basic4.
18148: # * Removed rmir/smir from tv92B.
18149: #
18150: # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
18151: # * add hds200 description (Walter Skorski)
18152: # * add beterm entry (Fred Fish)
18153: # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
18154: # iris-color entries.
18155: # * add emx entries.
18156: # * Replaced unixpc entry with Benjamin Sittler's corrected version.
18157: # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
18158: # versions.
18159: # * remove sgr string from qnx based on report by Xiaodan Tang
18160: # * Added u8/u9, removed rmul/smul from sun-il.
18161: # * 4.2 tic displays \0 rather than \200.
18162: # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
18163: # apparently based on cp-866).
18164: # * Merged in Pavel Roskin's acsc for linux-koi8
1.11 millert 18165: # * Corrected some erroneous \\'s to \.
1.1 millert 18166: # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
18167: # * II -> ii in pcvtXX, screen, xterm.
18168: # * Removed \n chars following ANSI escapes in sgr & friends.
18169: # * Updated Wyse entries.
18170: # * h19 corrections from Tim Pierce.
18171: # * Noted that the dm2500 has both ich and smir.
18172: # * added pccons for the Alpha under OSF/1.
18173: # * Added Sony NEWS workstation entries and cit101e-rv.
18174: # * Reverted `amiga'; to Kent Polk's version, as I'm told
18175: # the Verkuil entry messes up with Amiga Telnet.
18176: # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
18177: # * Corrected attributions in 10.2.0 release notes.
18178: # * Scanned the Shuford archive for new terminfos and information.
18179: # * Removed sgr from qnx entry (Thomas Dickey).
18180: # * Added entries for ICL and Kokusai Data Systems terminals.
18181: # * Incorporated NCR terminfos from the Boundless Technology FTP site.
18182: # * Incorporated att700 from the Boundless Technology FTP site.
18183: # * Miscellaneous contact-address and Web-page updates.
1.11 millert 18184: #
18185: # 1998/5/9
1.1 millert 18186: # * add nxterm and xterm-color terminfo description (request by Cristian
18187: # Gafton <gafton@redhat.com>).
1.11 millert 18188: # * modify rxvt terminfo description to clear alternate screen before
1.1 millert 18189: # switching back to normal screen, for compatibility with applications
18190: # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
1.11 millert 18191: # * modify linux terminfo description to reset color palette (reported
1.1 millert 18192: # by Telford Tendys <telford@eng.uts.edu.au>).
1.11 millert 18193: #
18194: # 1998/7/4
18195: # * merge changes from current XFree86 xterm terminfo descriptions.
18196: #
18197: # 1998/7/25
1.1 millert 18198: # * Added minitel1 entries from Alexander Montaron.
18199: # * Added qnxt2 from Federico Bianchi.
1.11 millert 18200: # * Added arm100 terminfo entries from Dave Millen.
18201: #
18202: # 1998/8/6
18203: # * Added ncsa telnet entries from Francesco Potorti
18204: #
18205: # 1998/8/15
18206: # * modify ncsa telnet entry to reflect color, other capabilities based on
18207: # examination of the source code - T.Dickey.
18208: #
18209: # 1998/8/22
18210: # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
18211: #
18212: # 1998/8/29
18213: # * Added Francesco Potorti's tuned Wyse 99 entries.
1.1 millert 18214: # * dtterm enacs correction from Alexander V. Lukyanov.
1.11 millert 18215: # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
18216: # * correct a typo in icl6404 entry.
18217: # * add xtermm and xtermc
18218: #
18219: # 1998/9/26
18220: # * format most %'char' sequences to %{number}
18221: # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
18222: # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
18223: #
18224: # 1998/10/10
18225: # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
18226: # * correct initialization string in xterm-r5, add misc other features
18227: # to correspond with xterm patch 84 - TD
18228: #
18229: # 1998/12/19
18230: # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
18231: # * add Mathew Vernon's mach console entries
18232: # * corrections for ncsa function-keys (report by Larry Virden)
18233: #
18234: # 1998/12/19
18235: # * change linux to use ncv#2, since underline does not work with color - TD
18236: #
18237: # 1999/1/9
18238: # * add kbt to iris-ansi, document other shift/control functionkeys - TD
18239: # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
18240: # application modes, change kent to use the correct keypad code - TD
18241: #
18242: # 1999/1/10
18243: # * add entry for Tera Term - TD
18244: #
18245: # 1999/1/23
18246: # * minor improvements for teraterm entry - TD
18247: # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
18248: # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
18249: #
18250: # 1999/2/20
18251: # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
18252: # xterm and ncsa entries by removing the unneeded ones. Note that
18253: # some entries will return kend & khome versus kslt and kfnd, for
18254: # PC-style keyboards versus strict vt220 compatiblity - TD
18255: #
18256: # 1999/3/13
18257: # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
18258: # tables - TD
18259: # * add 'crt' entry - TD
18260: # * correct typos in 'linux-c' entry - TD
18261: #
18262: # 1999/3/14
18263: # * update entries for BSD/OS console to use klone+sgr and klone+color
18264: # (Jeffrey C Honig)
18265: #
18266: # 1999/3/27
18267: # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
18268: #
18269: # 1999/4/10
18270: # * add linux-lat, from RedHat patches to ncurses 4.2
18271: #
18272: # 1999/4/17
18273: # * add complete set of default function-key definitions for scoansi - TD.
18274: #
18275: # 1999/7/3
18276: # * add cnorm, cvvis for Linux 2.2 kernels
18277: #
18278: # 1999/7/24
18279: # * add kmous to xterm-r5 -TD
18280: # * correct entries xterm+sl and xterm+sl-twm, which were missing the
18281: # parent "use" clause -TD
18282: #
18283: # 1999/7/31
18284: # * corrected cnorm, added el1 in 'screen' description -TD
18285: #
18286: # 1999/8/14
18287: # * add ms-vt100 -TD
18288: #
18289: # 1999/8/21
18290: # * corrections to beterm entry -TD
18291: #
18292: # 1999/8/28
18293: # * add cygwin entry -TD
18294: #
18295: # 1999/9/4
18296: # * minor corrections for beterm entry -TD
18297: #
18298: # 1999/9/18
18299: # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
18300: #
18301: # 1999/9/25
18302: # * add amiga-8bit entry
18303: # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
18304: # rcons-color, based on
18305: # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
18306: # * add alias for iris-ansi-net
18307: #
18308: # 1999/10/2
18309: # * corrected scoansi entry's acsc, some function keys, add color -TD
18310: #
18311: # 1999/10/23
18312: # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
18313: # * reorder ncsa entries to make ncsa-vt220 use the alternate function
18314: # key mapping, leaving Potorti's entries more like he named them -TD
18315: # * remove enter/exit am-mode from cygwin -TD
18316: #
18317: # 1999/10/30
18318: # * correct typos in several entries (missing '[' from CSI):
18319: # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
18320: # strings for avt-ns -TD
18321: # * add 'dim' to ncv mask for linux (report by Klaus Weide).
18322: #
18323: # 1999/11/27
18324: # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
18325: # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
18326: # * add xterm-88color and xterm-256color -TD
18327: #
18328: # 1999/12/4
18329: # * add "obsolete" termcap strings -TD
18330: # * add kvt and gnome entries -TD
18331: #
18332: # 1999/12/11
18333: # * correct cup string for regent100 -TD
18334: #
18335: # 2000/1/1
18336: # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
18337: # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
18338: # * change OTrs capabilities to rs2 -TD
18339: # * add obsolete and extended capabilities to 'screen' -TD
1.13 millert 18340: #
18341: # 2000/1/5
18342: # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
18343: # with kf10 -TD
18344: # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
18345: # and adding kcbt -TD
1.14 millert 18346: #
18347: # 2000/1/12
18348: # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
18349: # nonstandard resource settings -TD
18350: #
18351: # 2000/2/26
18352: # * minor fixes for xterm-*, based on Debian #58530 -TD
18353: #
18354: # 2000/3/4
18355: # * add several terminal types from esr's "11.0", as well as comments.
18356: # bg300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
18357: # vt220-8bit, vt220-old, wy85-8bit
1.19 ! millert 18358: #
! 18359: # 2000/3/18
! 18360: # * add several terminal types from esr's "11.0.1" (ansi-*).
! 18361: # * update OTxx capabilities for changes on 2000/3/4.
! 18362: # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
1.1 millert 18363: #
18364: # The following sets edit modes for GNU EMACS.
18365: # Local Variables:
18366: # fill-prefix:"\t"
18367: # fill-column:75
18368: # comment-column:0
18369: # comment-start-skip:"^#+"
18370: # comment-start:"# "
1.11 millert 18371: # compile-command:"tic -c terminfo.master"
1.1 millert 18372: # End:
18373: ######## SHANTIH! SHANTIH! SHANTIH!