Annotation of src/share/termtypes/termtypes.master, Revision 1.20
1.1 millert 1: ######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE
2: #
1.20 ! millert 3: # $OpenBSD: termtypes.master,v 1.19 2000/03/23 14:29:35 millert Exp $
1.15 millert 4: #
1.11 millert 5: # This version of terminfo.src is distributed with ncurses.
6: # Report bugs to
7: # bug-ncurses@gnu.org
8: #
9: # Version 10.2.1
1.20 ! millert 10: # Date: 2000/03/26 00:53:29
1.11 millert 11: # terminfo syntax
1.1 millert 12: #
13: # Eric S. Raymond (current maintainer)
14: # John Kunze, Berkeley
15: # Craig Leres, Berkeley
16: #
1.14 millert 17: # Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu
1.1 millert 18: # address is no longer valid. The latest version can always be found at
1.14 millert 19: # <http://www.tuxedo.org/terminfo>.
1.1 millert 20: #
21: # PURPOSE OF THIS FILE:
22: #
23: # This file describes the capabilities of various character-cell terminals,
24: # as needed by software such as screen-oriented editors.
25: #
26: # Other terminfo and termcap files exist, supported by various OS vendors
27: # or as relics of various older versions of UNIX. This one is the longest
28: # and most comprehensive one in existence. It subsumes not only the entirety
29: # of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL
30: # termcap file, but also large numbers of vendor-maintained termcap and
31: # terminfo entries more complete and carefully tested than those in historical
32: # termcap/terminfo versions.
33: #
34: # Pointers to related resources (including the ncurses distribution) may
1.14 millert 35: # be found at <http://www.tuxedo.org/terminfo>.
1.1 millert 36: #
37: # INTERNATIONALIZATION:
38: #
39: # This file uses only the US-ASCII character set (no ISO8859 characters).
40: #
41: # This file assumes a US-ASCII character set. If you need to fix this, start
42: # by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers
43: # for your character set. \E(A and \E)A enables the British character set
44: # with the pound sign at position 2/3.
45: #
46: # In a Japanese-processing environment using EUC/Japanese or Shift-JIS,
47: # C1 characters are considered the first-byte set of the Japanese encodings,
48: # so \E)0 should be avoided in <enacs> and initialization strings.
49: #
50: # FILE FORMAT:
51: #
52: # The version you are looking at may be in any of three formats: master
53: # (terminfo with OT capabilities), stock terminfo, or termcap. You can tell
54: # which by the format given in the header above.
55: #
56: # The master format is accepted and generated by the terminfo tools in the
57: # ncurses suite; it differs from stock (System V-compatible) terminfo only
58: # in that it admits a group of capabilities (prefixed `OT') equivalent to
59: # various obsolete termcap capabilities. You can, thus, convert from master
60: # to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if
61: # you have ncurses `tic -I' is nicer (among other things, it automatically
62: # outputs entries in a canonical form).
63: #
64: # The termcap version is generated automatically from the master version
65: # using tic -C. This filtering leaves in the OT capabilities under their
66: # original termcap names. All translated entries fit within the 1023-byte
67: # string-table limit of archaic termcap libraries except where explicitly
68: # noted below. Note that the termcap translation assumes that your termcap
69: # library can handle multiple tc capabilities in an entry. 4.4BSD has this
70: # capability. Older versions of GNU termcap, through 1.3, do not.
71: #
72: # For details on these formats, see terminfo(5) in the ncurses distribution,
73: # and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD
74: # curses has been declared obsolete by the caretakers of the 4.4BSD sources
75: # as of June 1995; they are encouraging everyone to migrate to ncurses.
76: #
77: # Note: unlike some other distributed terminfo files (Novell Unix & SCO's),
78: # no entry in this file has embedded comments. This is so source translation
79: # to termcap only has to carry over leading comments. Also, no name field
80: # contains embedded whitespace (such whitespace confuses rdist).
81: #
82: # Further note: older versions of this file were often installed with an editor
83: # script (reorder) that moved the most common terminal types to the front of
84: # the file. This should no longer be necessary, as the file is now ordered
85: # roughly by type frequency with ANSI/VT100 and other common types up front.
86: #
87: # Some information has been merged in from terminfo files distributed by
88: # USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information
89: # comes from vendors who maintain official terminfos for their hardware
90: # (notably DEC and Wyse).
91: #
92: # A detailed change history is included at the end of this file.
93: #
94: # FILE ORGANIZATION:
95: #
96: # Comments in this file begin with # - they cannot appear in the middle
97: # of a terminfo/termcap entry (this feature had to be sacrificed in order
98: # to allow standard terminfo and termcap syntax to be generated cleanly from
99: # the master format). Individual capabilities are commented out by
100: # placing a period between the colon and the capability name.
101: #
102: # The file is divided up into major sections (headed by lines beginning with
103: # the string "########") and minor sections (beginning with "####"); do
104: #
105: # grep "^####" <file> | more
106: #
107: # to see a listing of section headings. The intent of the divisions is
108: # (a) to make it easier to find things, and (b) to order the database so
109: # that important and frequently-encountered terminal types are near the
110: # front (so that you'll get reasonable search efficiency from a linear
111: # search of the termcap form even if you don't use reorder). Minor sections
112: # usually correspond to manufacturers or standard terminal classes.
113: # Parenthesized words following manufacturer names are type prefixes or
114: # product line names used by that manufacturers.
115: #
116: # HOW TO READ THE ENTRIES:
117: #
118: # The first name in an entry is the canonical name for the model or
119: # type, last entry is a verbose description. Others are mnemonic synonyms for
120: # the terminal.
121: #
122: # Terminal names look like <manufacturer> <model> - <modes/options>
123: # The part to the left of the dash, if a dash is present, describes the
124: # particular hardware of the terminal. The part to the right may be used
125: # for flags indicating special ROMs, extra memory, particular terminal modes,
126: # or user preferences.
127: #
128: # All names should be in lower case, for consistency in typing.
129: #
130: # The following are conventionally used suffixes:
131: # -2p Has two pages of memory. Likewise 4p, 8p, etc.
132: # -am Enable auto-margin.
133: # -m Monochrome. Suppress color support
134: # -mc Magic-cookie. Some terminals (notably older Wyses) can
135: # only support one attribute without magic-cookie lossage.
136: # Their base entry is usually paired with another that
137: # uses magic cookies to support multiple attributes.
138: # -nam No auto-margin - suppress <am> capability
139: # -nl No labels - suppress soft labels
140: # -ns No status line - suppress status line
141: # -rv Terminal in reverse video mode (black on white)
142: # -s Enable status line.
143: # -vb Use visible bell (<flash>) rather than <bel>.
144: # -w Wide - in 132 column mode.
145: # If a name has multiple suffixes and one is a line height, that one should
146: # go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'.
147: #
148: # Entries with embedded plus signs are designed to be included through use/tc
149: # capabilities, not used as standalone entries.
150: #
151: # To avoid search clashes, some older all-numeric names for terminals have
152: # been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621).
153: # All primary names of terminals now have alphanumeric prefixes.
154: #
155: # Comments marked "esr" are mostly results of applying the termcap-compiler
156: # code packaged with ncurses and contemplating the resulting error messages.
157: # In many cases, these indicated obvious fixes to syntax garbled by the
158: # composers. In a few cases, I was able to deduce corrected forms for garbled
159: # capabilities by looking at context. All the information in the original
160: # entries is preserved in the comments.
161: #
162: # In the comments, terminfo capability names are bracketed with <> (angle
163: # brackets). Termcap capability names are bracketed with :: (colons).
164: #
165: # INTERPRETATION OF USER CAPABILITIES
166: #
167: # The System V Release 4 and XPG4 terminfo format defines ten string
168: # capabilities for use by applications, <u0>...<u9>. In this file, we use
169: # certain of these capabilities to describe functions which are not covered
170: # by terminfo. The mapping is as follows:
171: #
172: # u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA)
173: # u8 terminal answerback description
174: # u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6)
175: # u6 cursor position report (equiv. to ANSI/ECMA-48 CPR)
176: #
177: # The terminal enquire string <u9> should elicit an answerback response
178: # from the terminal. Common values for <u9> will be ^E (on older ASCII
179: # terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals).
180: #
181: # The cursor position request (<u7>) string should elicit a cursor position
182: # report. A typical value (for VT100 terminals) is \E[6n.
183: #
184: # The terminal answerback description (u8) must consist of an expected
185: # answerback string. The string may contain the following scanf(3)-like
186: # escapes:
187: #
188: # %c Accept any character
189: # %[...] Accept any number of characters in the given set
190: #
191: # The cursor position report (<u6>) string must contain two scanf(3)-style
192: # %d format elements. The first of these must correspond to the Y coordinate
193: # and the second to the %d. If the string contains the sequence %i, it is
194: # taken as an instruction to decrement each value after reading it (this is
195: # the inverse sense from the cup string). The typical CPR value is
196: # \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals).
197: #
1.14 millert 198: # These capabilities are used by tack(1m), the terminfo action checker
199: # (distributed with ncurses 5.0).
1.1 millert 200: #
201: # TABSET FILES
202: #
203: # All the entries in this file have been edited to assume that the tabset
204: # files directory is /usr/share/tabset, in conformance with the File Hierarchy
205: # Standard for Linux and open-source BSD systems. Some vendors (notably Sun)
206: # use /usr/lib/tabset or (more recently) /usr/share/lib/tabset.
207: #
208: # No curses package we know of actually uses these files. If their location
209: # is an issue, you will have to hand-patch the file locations before compiling
210: # this file.
211: #
212: # REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL
213: #
214: # As the ANSI/ECMA-48 standard and variants take firmer hold, and as
215: # character-cell terminals are increasingly replaced by X displays, much of
216: # this file is becoming a historical document (this is part of the reason for
1.14 millert 217: # the new organization, which puts ANSI types, xterm, Unix consoles,
1.1 millert 218: # and vt100 up front in confidence that this will catch 95% of new hardware).
219: #
220: # For the terminal types still alive, I'd like to have manufacturer's
221: # contact data (Internet address and/or snail-mail + phone).
222: #
223: # I'm also interested in enriching the comments so that the latter portions of
224: # the file do in fact become a potted history of VDT technology as seen by
225: # UNIX hackers. Ideally, I'd like the headers for each manufacturer to
226: # include its live/dead/out-of-the-business status, and for as many
227: # terminal types as possible to be tagged with information like years
228: # of heaviest use, popularity, and interesting features.
229: #
230: # I'm especially interested in identifying the obscure entries listed under
231: # `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal
232: # wisdom about them gets lost. If you know a lot about obscure old terminals,
233: # please go to the terminfo resource page, grab the UFO file (ufo.ti), and
234: # eyeball it for things you can identify and describe.
235: #
236: # If you have been around long enough to contribute, please read the file
237: # with this in mind and send me your annotations.
238: #
239: # COPYRIGHTS AND OTHER DELUSIONS
240: #
241: # The BSD ancestor of this file had a standard Regents of the University of
242: # California copyright with dates from 1980 to 1993.
243: #
244: # Some information has been merged in from a terminfo file SCO distributes.
245: # It has an obnoxious boilerplate copyright which I'm ignoring because they
246: # took so much of the content from the ancestral BSD versions of this file
247: # and didn't attribute it, thereby violating the BSD Regents' copyright.
248: #
249: # Not that anyone should care. However many valid functions copyrights may
250: # serve, putting one on a termcap/terminfo file with hundreds of anonymous
251: # contributors makes about as much sense as copyrighting a wall-full of
252: # graffiti -- it's legally dubious, ethically bogus, and patently ridiculous.
253: #
254: # This file deliberately has no copyright. It belongs to no one and everyone.
255: # If you claim you own it, you will merely succeed in looking like a fool.
256: # Use it as you like. Use it at your own risk. Copy and redistribute freely.
257: # There are no guarantees anywhere. Svaha!
258: #
259:
260: ######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES
261: #
1.14 millert 262: # This section describes terminal classes and brands that are still
1.1 millert 263: # quite common.
264: #
265:
266: #### Specials
267: #
268: # Special "terminals". These are used to label tty lines when you don't
269: # know what kind of terminal is on it. The characteristics of an unknown
270: # terminal are the lowest common denominator - they look about like a ti 700.
271: #
272:
1.11 millert 273: dumb|80-column dumb tty,
274: am,
1.1 millert 275: cols#80,
1.11 millert 276: bel=^G, cr=^M, cud1=^J, ind=^J,
277: unknown|unknown terminal type,
278: gn, use=dumb,
1.1 millert 279: lpr|printer|line printer,
1.11 millert 280: OTbs, hc, os,
281: cols#132, lines#66,
282: bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J,
283: glasstty|classic glass tty interpreting ASCII control characters,
1.19 millert 284: OTbs, am,
1.1 millert 285: cols#80,
1.19 millert 286: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H,
287: kcud1=^J, nel=^M^J, .kbs=^H,
288:
289: vanilla,
290: OTbs,
291: bel=^G, cr=^M, cud1=^J, ind=^J,
1.1 millert 292:
293: #### ANSI.SYS/ISO 6429/ECMA-48 Capabilities
294: #
295: # See the end-of-file comment for more on these.
296: #
297:
1.19 millert 298: # ANSI capabilities are broken up into pieces, so that a terminal
299: # implementing some ANSI subset can use many of them.
300: ansi+local1,
301: cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
302: ansi+local,
303: cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
304: cuu=\E[%p1%dA,
305: use=ansi+local1,
306: ansi+tabs,
307: cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[2g,
308: ansi+inittabs,
309: it#8, use=ansi+tabs,
310: ansi+erase,
311: clear=\E[H\E[J, ed=\E[J, el=\E[K,
312: ansi+rca,
313: hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd,
314: ansi+cup,
315: cup=\E[%i%p1%d;%p2%dH, home=\E[H,
316: ansi+rep,
317: rep=%p1%c\E[%p2%{1}%-%db,
318: ansi+idl1,
319: dl1=\E[M, il1=\E[L,
320: ansi+idl,
321: dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1,
322: ansi+idc,
323: dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6,
324: ansi+arrows,
325: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
326: khome=\E[H,
327: ansi+sgr|ansi graphic renditions,
328: blink=\E[5m, invis=\E[8m, rev=\E[7m, sgr0=\E[0m,
329: ansi+sgrso|ansi standout only,
330: rmso=\E[m, smso=\E[7m,
331: ansi+sgrul|ansi underline only,
332: rmul=\E[m, smul=\E[4m,
333: ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim,
334: bold=\E[1m,
335: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
336: ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold,
337: dim=\E[2m,
338: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;m, use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul,
339: ansi+pp|ansi printer port,
340: mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
341: ansi+csr|ansi scroll-region plus cursor save & restore,
342: csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7,
343:
1.1 millert 344: # The IBM PC alternate character set. Plug this into any Intel console entry.
345: # We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the
346: # ROM graphics for control characters such as the diamond, up- and down-arrow.
347: # This works with the System V, Linux, and BSDI consoles. It's a safe bet this
348: # will work with any Intel console, they all seem to have inherited \E[11m
349: # from the ANSI.SYS de-facto standard.
1.11 millert 350: klone+acs|alternate character set for ansi.sys displays,
351: acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1.1 millert 352: rmacs=\E[10m, smacs=\E[11m,
353:
354: # Highlight controls corresponding to the ANSI.SYS standard. Most
355: # console drivers for Intel boxes obey these. Makes the same assumption
356: # about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>,
357: # <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS.
1.11 millert 358: klone+sgr|attribute control for ansi.sys displays,
359: blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m,
360: rmpch=\E[10m, rmso=\E[m, rmul=\E[m,
1.1 millert 361: sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
1.11 millert 362: sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m,
363: use=klone+acs,
1.1 millert 364:
365: # Highlight controls corresponding to the ANSI.SYS standard. *All*
366: # console drivers for Intel boxes obey these. Does not assume \E[11m will
367: # work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS
368: # diamond and arrow characters under curses.
1.11 millert 369: klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m),
370: blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m,
371: rmul=\E[m,
1.1 millert 372: sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
1.11 millert 373: sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
374: use=klone+acs,
1.1 millert 375:
376: # KOI8-R (RFC1489) acs (alternate character set)
377: # From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996.
1.11 millert 378: klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset,
1.1 millert 379: acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225,
380: rmacs=\E[10m, smacs=\E[11m,
381:
382: # ANSI.SYS color control. The setab/setaf caps depend on the coincidence
383: # between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer
384: # but equivalent strings that don't rely on that coincidence:
385: # setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
386: # setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
387: # The DOS 5 manual asserts that these sequences meet the ISO 6429 standard.
388: # They match a subset of ECMA-48.
1.11 millert 389: klone+color|color control for ansi.sys and ISO6429-compatible displays,
390: colors#8, ncv#3, pairs#64,
1.1 millert 391: op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
392:
393: # This is better than klone+color, it doesn't assume white-on-black as the
394: # default color pair, but many `ANSI' terminals don't grok the <op> cap.
1.11 millert 395: ecma+color|color control for ECMA-48-compatible terminals,
1.20 ! millert 396: AX,
1.11 millert 397: colors#8, ncv#3, pairs#64,
1.1 millert 398: op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
399:
400: # Attribute control for ECMA-48-compatible terminals
1.11 millert 401: ecma+sgr|attribute capabilities for true ECMA-48 terminals,
402: rmso=\E[27m, rmul=\E[24m,
403: use=klone+sgr,
1.1 millert 404:
405: # For comparison, here are all the capabilities implied by the Intel
406: # Binary Compatibility Standard (level 2) that fit within terminfo.
407: # For more detail on this rather pathetic standard, see the comments
408: # near the end of this file.
1.11 millert 409: ibcs2|Intel Binary Compatibility Standard prescriptions,
410: cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cud=\E[%p1%dB,
411: cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
412: dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX,
413: hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
1.1 millert 414: indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, rmam=\E[?7l, sc=\E7,
1.11 millert 415: smam=\E[?7h, tbc=\E[g, vpa=\E[%i%p1%dd,
1.1 millert 416:
417: #### ANSI/ECMA-48 terminals and terminal emulators
418: #
419: # See near the end of this file for details on ANSI conformance.
420: # Don't mess with these entries! Lots of other entries depend on them!
421: #
422: # This section lists entries in a least-capable to most-capable order.
423: # if you're in doubt about what `ANSI' matches yours, try them in that
424: # order and back off from the first that breaks.
425:
1.19 millert 426: # ansi-mr is for ANSI terminals with ONLY relative cursor addressing
427: # and more than one page of memory. It uses local motions instead of
428: # direct cursor addressing, and makes almost no assumptions. It does
429: # assume auto margins, no padding and/or xon/xoff, and a 24x80 screen.
430: ansi-mr|mem rel cup ansi,
431: am, xon,
432: cols#80, lines#24, use=vanilla, use=ansi+erase,
433: use=ansi+local1,
434:
435: # ansi-mini is a bare minimum ANSI terminal. This should work on anything, but
436: # beware of screen size problems and memory relative cursor addressing.
1.1 millert 437: ansi-mini|any ansi terminal with pessimistic assumptions,
1.19 millert 438: am, xon,
439: cols#80, lines#24, use=vanilla, use=ansi+cup,
440: use=ansi+erase,
441:
442: # ansi-mtabs adds relative addressing and minimal tab support
443: ansi-mtabs|any ansi terminal with pessimistic assumptions,
444: it#8,
445: ht=^I, use=ansi+local1, use=ansi-mini,
1.1 millert 446:
447: # ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL
448: #
449: # The following is an entry for the full ANSI 3.64 (1977). It lacks
450: # padding, but most terminals using the standard are "fast" enough
451: # not to require any -- even at 9600 bps. If you encounter problems,
452: # try including the padding specifications.
453: #
454: # Note: the :as: and :ae: specifications are not implemented here, for
455: # the available termcap documentation does not make clear WHICH alternate
456: # character set to specify. ANSI 3.64 seems to make allowances for several.
457: # Please make the appropriate adjustments to fit your needs -- that is
458: # if you will be using alternate character sets.
459: #
460: # There are very few terminals running the full ANSI 3.64 standard,
461: # so I could only test this entry on one verified terminal (Visual 102).
462: # I would appreciate the results on other terminals sent to me.
463: #
464: # Please report comments, changes, and problems to:
465: #
466: # U.S. MAIL: Hugh Hansard
467: # Box: 22830
468: # Emory University
469: # Atlanta, GA. 30322.
470: #
471: # USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh.
472: #
1.14 millert 473: # (Added vt100 <rc>,<sc> to quiet a tic warning --esr)
1.1 millert 474: ansi77|ansi 3.64 standard 1977 version,
1.11 millert 475: OTbs, am, mir,
1.1 millert 476: cols#80, it#8, lines#24,
477: bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
478: cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
479: cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K,
480: home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H,
481: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
1.14 millert 482: kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM,
483: rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h,
484: smso=\E[7m, smul=\E[4m,
1.1 millert 485:
486: # Procomm and some other ANSI emulations don't recognize all of the ANSI-
487: # standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and
488: # <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>,
489: # <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to
490: # 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem
491: # to confuse many emulators. On the other hand, we can count on these programs
492: # doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured
493: # <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under
494: # ANSI.SYS influence.
495: # From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995
496: pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode),
1.11 millert 497: OTbs, am, mir, msgr,
1.1 millert 498: cols#80, it#8, lines#24,
1.11 millert 499: bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D,
500: cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
501: dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
502: hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
503: kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[2g,
504: use=klone+sgr-dumb,
505: pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode),
506: lines#25, use=pcansi-m,
507: pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode),
508: lines#33, use=pcansi-m,
509: pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode),
510: lines#43, use=pcansi-m,
1.1 millert 511: # The color versions. All PC emulators do color...
512: pcansi|ibm-pc terminal programs claiming to be ansi,
1.11 millert 513: use=klone+color, use=pcansi-m,
514: pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines,
515: lines#25, use=pcansi,
516: pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines,
517: lines#33, use=pcansi,
518: pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines,
519: lines#43, use=pcansi,
1.1 millert 520:
521: # ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color.
522: # If you want pound signs rather than dollars, replace `B' with `A'
523: # in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities.
524: # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
1.11 millert 525: ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes,
526: mc5i,
527: cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
528: cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM,
529: ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I,
530: ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H,
531: kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
532: kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S,
533: rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B,
534: s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[2g,
535: vpa=\E[%i%p1%dd, use=pcansi-m,
1.1 millert 536:
537: # ansi -- this terminfo expresses the largest subset of X3.64 that will fit in
538: # standard terminfo. Assumes ANSI.SYS-compatible attributes and color.
539: # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995
1.11 millert 540: ansi|ansi/pc-term compatible with color,
541: u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c,
542: u9=\E[c,
543: use=ecma+color, use=klone+sgr, use=ansi-m,
544:
1.19 millert 545: # ansi-generic is a vanilla ANSI terminal. This is assumed to implement
546: # all the normal ANSI stuff with no extensions. It assumes
547: # insert/delete line/char is there, so it won't work with
548: # vt100 clones. It assumes video attributes for bold, blink,
549: # underline, and reverse, which won't matter much if the terminal
550: # can't do some of those. Padding is assumed to be zero, which
551: # shouldn't hurt since xon/xoff is assumed.
552: ansi-generic|generic ansi standard terminal,
553: am, xon,
554: cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup,
555: use=ansi+rca, use=ansi+erase, use=ansi+tabs,
556: use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep,
557: use=ansi+sgrbold, use=ansi+arrows,
558:
1.11 millert 559: #### DOS ANSI.SYS variants
560: #
561: # This completely describes the sequences specified in the DOS 2.1 ANSI.SYS
562: # documentation (except for the keyboard key reassignment feature, which
563: # doen't fit the <pfkey> model well). The klone+acs sequences were valid
564: # though undocumented. The <pfkey> capability is untested but should work for
565: # keys F1-F10 (%p1 values outside this range will yield unpredictable results).
566: # From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995
567: ansi.sys-old|ANSI.SYS under PC-DOS 2.1,
568: OTbs, am, mir, msgr, xon,
569: cols#80, lines#25,
570: clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
571: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H,
572: is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
573: khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s", rc=\E[u,
574: rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR,
575: u7=\E[6n,
576: use=klone+color, use=klone+sgr,
577: ansi.sys|ANSI.SYS 3.1 and later versions,
578: el=\E[K, use=ansi.sys-old,
579:
580: #
581: # Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS.
582: # This should only be used when the terminal emulator cannot redefine the keys.
583: # Since redefining keys with ansi.sys also affects PC-DOS programs, the key
584: # definitions must be restored. If the terminal emulator is quit while in vi
585: # or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS.
586: # The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix
587: # (^U and ^D are already defined for tn3270). The ESC is safe for vi but it
588: # does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab.
589: # Note that <kcub1> is always BS, because PC-dos can tolerate this change.
590: # Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi.
591: # Consequently the End keypad key could not be set (it is relatively safe and
592: # actually useful because it sends ^@ O, which beeps and opens a line above).
593: ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi,
594: is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
595: rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p,
596: smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p,
597: use=ansi.sys,
598: #
599: # Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer.
600: nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS,
601: dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
602: is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, use=ansi.sys,
603: #
604: # See ansi.sysk and nansi.sys above.
605: nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi,
606: dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L,
607: is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p,
608: use=ansi.sysk,
609:
610: #### ANSI console types
611: #
612:
613: #### BeOS
614: #
615: # BeOS entry for Terminal program Seems to be almost ANSI
616: beterm|BeOS Terminal,
617: am, eo, mir, msgr, xenl, xon,
618: colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64,
619: bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
620: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
621: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
622: dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
623: home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
624: ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H,
625: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
626: kdch1=\E[3~, kend=\E[4~, kf1=\E[11~, kf10=\E[20~,
627: kf11=\E[21~, kf12=\E[22~, kf2=\E[12~, kf3=\E[13~,
628: kf4=\E[14~, kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~,
629: kf9=\E[19~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
630: kspd=^Z, nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM,
631: rmir=\E[4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7,
632: setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
633: setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm,
634: sgr0=\E[0;10m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
635: u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, vpa=\E[%i%p1%dd,
1.1 millert 636:
637: #### Linux consoles
638: #
639:
640: # This entry is good for the 1.2.13 or later version of the Linux console.
641: #
642: # ***************************************************************************
643: # * *
644: # * WARNING: *
645: # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
646: # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
647: # * character. Here are the keymap replacement lines that will set this up: *
648: # * *
649: # keycode 15 = Tab Tab
650: # alt keycode 15 = Meta_Tab
651: # shift keycode 15 = F26
652: # string F26 ="\033[Z"
653: # * *
654: # * This has to use a key slot which is unfortunate (any unused one will *
655: # * do, F26 is the higher-numbered one). The change ought to be built *
656: # * into the kernel tables. *
657: # * *
658: # ***************************************************************************
659: #
660: # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
661: # and it matters, turn off <ccc>. The %02x escape used to implement this is
662: # not back-portable to SV curses and not supported in ncurses versions before
663: # 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
664: # themselves; this entry assumes that capability.
665: #
1.14 millert 666: # This entry is good for the 1.2.13 or later version of the Linux console.
667: #
668: # ***************************************************************************
669: # * *
670: # * WARNING: *
671: # * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in *
672: # * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab *
673: # * character. Here are the keymap replacement lines that will set this up: *
674: # * *
675: # keycode 15 = Tab Tab
676: # alt keycode 15 = Meta_Tab
677: # shift keycode 15 = F26
678: # string F26 ="\033[Z"
679: # * *
680: # * This has to use a key slot which is unfortunate (any unused one will *
681: # * do, F26 is the higher-numbered one). The change ought to be built *
682: # * into the kernel tables. *
683: # * *
684: # ***************************************************************************
685: #
686: # The 1.3.x kernels add color-change capabilities; if yours doesn't have this
687: # and it matters, turn off <ccc>. The %02x escape used to implement this is
688: # not back-portable to SV curses and not supported in ncurses versions before
689: # 1.9.9. All linux kernels since 1.2.13 (at least) set the screen size
690: # themselves; this entry assumes that capability.
691: #
1.11 millert 692: # The 2.2.x kernels add a private mode that sets the cursor type; use that to
693: # get a block cursor for cvvis.
694: # reported by Frank Heckenbach <frank@g-n-u.de>.
1.1 millert 695: linux|linux console,
696: am, bce, eo, mir, msgr, xenl, xon,
1.11 millert 697: it#8, ncv#18,
1.1 millert 698: acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
1.11 millert 699: bel=^G, civis=\E[?25l\E[?1c, clear=\E[H\E[J,
700: cnorm=\E[?25h\E[?0c, cr=^M, csr=\E[%i%p1%d;%p2%dr,
701: cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
702: cuu1=\E[A, cvvis=\E[?25h\E[?8c, dch=\E[%p1%dP, dch1=\E[P,
703: dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J,
704: el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H,
705: hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
706: il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177,
707: kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
708: kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
709: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
710: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
711: kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
712: kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1.1 millert 713: khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z,
714: nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m,
715: rmul=\E[24m, rs1=\Ec\E]R, sc=\E7,
716: sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m,
717: smir=\E[4h, smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR,
718: u7=\E[6n, u8=\E[?6c, u9=\E[c, vpa=\E[%i%p1%dd,
719: use=klone+sgr, use=ecma+color,
1.11 millert 720: linux-m|Linux console no color,
721: colors@, pairs@,
722: setab@, setaf@, setb@, setf@, use=linux,
723: linux-c-nc|linux console 1.3.x hack for ncurses only,
1.1 millert 724: ccc,
1.11 millert 725: initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x,
726: oc=\E]R,
727: use=linux,
1.1 millert 728: # From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996
1.11 millert 729: linux-c|linux console 1.3.6+ with private palette for each virtual console,
730: ccc,
731: colors#8, pairs#64,
732: initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p3%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%p4%{255}%&%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'A'%+%c%e%gx%d%;,
733: oc=\E]R,
734: use=linux,
1.1 millert 735:
736: # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
1.11 millert 737: linux-nic|linux with ich/ich1 suppressed for non-curses programs,
738: ich@, ich1@,
739: use=linux,
1.1 millert 740:
741: # This assumes you have used setfont(8) to load one of the Linux koi8-r fonts.
742: # acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997.
1.11 millert 743: linux-koi8|linux with koi8 alternate character set,
1.1 millert 744: acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224,
1.11 millert 745: use=linux, use=klone+koi8acs,
1.1 millert 746:
747: # Another entry for KOI8-r with Qing Long's acsc.
748: # (which one better complies with the standard?)
749: linux-koi8r|linux with koi8-r alternate character set,
750: use=linux, use=klone+koi8acs,
751:
1.14 millert 752: # Entry for the latin1 and latin2 fonts
753: linux-lat|linux with latin1 or latin2 alternate character set,
754: acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376,
755: use=linux,
756:
757: #### Mach
758: #
759:
760: # From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk>
1.11 millert 761: mach|Mach Console,
762: am, km,
763: cols#80, it#8, lines#25,
764: bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
765: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
766: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
767: cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
768: el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J,
769: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
770: kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ,
771: kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
772: kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U,
773: kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m,
774: smso=\E[7m, smul=\E[4m,
775: mach-bold|Mach Console with bold instead of underline,
776: rmul=\E[0m, smul=\E[1m,
777: use=mach,
778: mach-color|Mach Console with ANSI color,
779: colors#8, pairs#64,
780: dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m,
781: setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
782: use=mach,
783:
1.14 millert 784: #### OSF Unix
785: #
786:
787: # OSF/1 1.1 Snapshot 2
788: pmcons|pmconsole|PMAX console,
789: am,
790: cols#128, lines#57,
791: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I,
792: ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
793: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
1.11 millert 794:
795: # SCO console and SOS-Syscons console for 386bsd
796: # (scoansi: had unknown capabilities
797: # :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\
798: # :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C:
799: # :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\
800: # :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\
801: # :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\
802: # I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based
803: # on the <smacs>=\E[12m -- esr)
1.1 millert 804: #
1.11 millert 805: # klone+sgr-dumb is an error since the acsc does not match -TD
1.1 millert 806: #
1.11 millert 807: # In this description based on SCO's keyboard(HW) manpage list of default function key
808: # values:
809: # F13-F24 are shifted F1-F12
810: # F25-F36 are control F1-F12
811: # F37-F48 are shift+control F1-F12
812: scoansi|SCO Extended ANSI standard crt,
813: OTbs, am, eo, xon,
814: colors#8, cols#80, it#8, lines#25, pairs#64,
815: acsc=0[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`ja0fxgqh2jYk?lZm@nEqDtCu4vAwBx3~y,
816: blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J,
817: cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
818: cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
819: ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, invis=\E[8m, kbeg=\E[E,
820: kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
821: kcuu1=\E[A, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W,
822: kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c,
823: kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g,
824: kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l,
825: kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p,
826: kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u,
827: kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P,
828: kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[],
829: kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q,
830: kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
831: kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[37;40m, rev=\E[7m,
832: ri=\E[T, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
833: setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
834: sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m,
835: sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
1.1 millert 836:
1.11 millert 837: # This actually describes the generic SVr4 display driver for Intel boxes.
838: # The <dim=\E[2m> isn't documented and therefore may not be reliable.
839: # From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995
840: att6386|at386|386at|AT&T WGS 6386 console,
841: am, bw, eo, xon,
842: cols#80, it#8, lines#25,
843: acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
844: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C,
845: clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD,
846: cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1.1 millert 847: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1.11 millert 848: cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
849: dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
850: home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
851: ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S,
852: indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H,
853: kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
854: kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ,
855: kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
856: kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@,
857: knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m,
858: ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
859: sc=\E7,
860: sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m,
861: sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m,
862: tbc=\E[2g, vpa=\E[%i%p1%dd,
863: use=klone+color,
864: # (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr)
865: pc6300plus|AT&T 6300 plus,
866: OTbs, am, xon,
867: cols#80, lines#24,
868: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C,
869: clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B,
870: cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
871: dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K,
872: home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J,
873: invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
874: kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe,
875: kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk,
876: nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1.1 millert 877: smso=\E[7m, smul=\E[4m, tbc=\E[3g,
878:
1.11 millert 879: # From: Benjamin C. W. Sittler <bsittler@nmt.edu>
1.1 millert 880: #
1.11 millert 881: # I have a UNIX PC which I use as a terminal attached to my Linux PC.
882: # Unfortunately, the UNIX PC terminfo entry that comes with ncurses
883: # is broken. All the special key sequences are broken, making it unusable
884: # with Emacs. The problem stems from the following:
885: #
886: # The UNIX PC has a plethora of keys (103 of them, and there's no numeric
887: # keypad!), loadable fonts, and strange highlighting modes ("dithered"
888: # half-intensity, "smeared" bold, and real strike-out, for example.) It also
889: # uses resizable terminal windows, but the bundled terminal program always
890: # uses an 80x24 window (and doesn't support seem to support a 132-column
891: # mode.)
892: #
893: # HISTORY: The UNIX PC was one of the first machines with a GUI, and used a
894: # library which was a superset of SVr3.5 curses (called tam, for "terminal
895: # access method".) tam includes support for real, overlapping windows,
896: # onscreen function key labels, and bitmap graphics. But since the primary
897: # user interface on the UNIX PC was a GUI program (ua, for "user
898: # assistant",) and remote administration was considered important for the
899: # machine, tam also supported VT100-compatible terminals attached to the
900: # serial port or used across the StarLan network. To simulate the extra keys
901: # not present on a VT100, users could press ESC and a two-letter sequence,
902: # such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences,
903: # however, were not the same as those sent by the actual Undo key. The
904: # actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example.
905: # (If you're interested in adding some of the tam calls to ncurses, btw, I
906: # have the full documentation and several programs which use tam. It also
907: # used an extended terminfo format to describe key sequences, special
908: # highlighting modes, etc.)
909: #
910: # KEYS: This means that ncurses would quite painful on the UNIX PC, since
911: # there are two sequences for every key-modifier combination (local keyboard
912: # sequence and remote "VT100" sequence.) But I doubt many people are trying
913: # to use ncurses on the UNIX PC, since ncurses doesn't properly handle the
914: # GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume)
915: # seem to have been built from the manual describing the VT100 sequences.
916: # This means it doesn't work for a real live UNIX PC.
917: #
918: # FONTS: The UNIX PC also has a strange interpretation of "alternate
919: # character set". Rather than the VT100 graphics you might expect, it allows
920: # up to 8 custom fonts to be loaded at any given time. This means that
921: # programs expecting VT100 graphics will usually be disappointed. For this
922: # reason I have disabled the smacs/rmacs sequences, but they could easily be
923: # re-enabled. Here are the relevant control sequences (from the ESCAPE(7)
924: # manpage), should you wish to do so:
925: #
926: # SGR10 - Select font 0 - ESC [ 10 m or SO
927: # SGR11 - Select font 1 - ESC [ 11 m or SI
928: # SGR12 - Select font 2 - ESC [ 12 m
929: # ... (etc.)
930: # SGR17 - Select font 7 - ESC [ 17 m
931: #
932: # Graphics for line drawing are not reliably found at *any* character
933: # location because the UNIX PC has dynamically reloadable fonts. I use font
934: # 0 for regular text and font 1 for italics, but this is by no means
935: # universal. So ASCII line drawing is in order if smacs/rmacs are enabled.
936: #
937: # MISC: The cursor visible/cursor invisible sequences were swapped in the
938: # distributed terminfo.
939: #
940: # To ameliorate these problems (and fix a few highlighting bugs) I rewrote
941: # the UNIX PC terminfo entry. The modified version works great with Lynx,
942: # Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC
943: # attached by serial cable. In Emacs, even the Undo key works, and many
944: # applications can now use the F1-F8 keys.
945: #
946: # esr's notes:
947: # Terminfo entry for the AT&T Unix PC 7300
948: # from escape(7) in Unix PC 7300 Manual.
949: # Somewhat similar to a vt100-am (but different enough
950: # to redo this from scratch.)
951: #
952: # /***************************************************************
953: # *
954: # * FONT LOADING PROGRAM FOR THE UNIX PC
955: # *
956: # * This routine loads a font defined in the file ALTFONT
957: # * into font memory slot #1. Once the font has been loaded,
958: # * it can be used as an alternative character set.
959: # *
960: # * The call to ioctl with the argument WIOCLFONT is the key
961: # * to this routine. For more information, see window(7) in
962: # * the PC 7300 documentation.
963: # ***************************************************************/
964: # #include <string.h> /* needed for strcpy call */
965: # #include <sys/window.h> /* needed for ioctl call */
966: # #define FNSIZE 60 /* font name size */
967: # #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */
968: # /*
969: # * The file /usr/lib/wfont/special.8.ft comes with the
970: # * standard PC software. It defines a graphics character set
971: # * similar to that of the Teletype 5425 terminal. To view
972: # * this or other fonts in /usr/lib/wfont, use the command
973: # * cfont <filename>. For further information on fonts see
974: # * cfont(1) in the PC 7300 documentation.
975: # */
976: #
977: # struct altfdata /* structure for alt font data */
978: # {
979: # short altf_slot; /* memory slot number */
980: # char altf_name[FNSIZE]; /* font name (file name) */
981: # };
982: # ldfont()
983: # {
984: # int wd; /* window in which altfont will be */
985: # struct altfdata altf;
986: # altf.altf_slot=1;
987: # strcpy(altf.altf_name,ALTFONT);
988: # for (wd =1; wd < 12; wd++) {
989: # ioctl(wd, WIOCLFONT,&altf);
990: # }
991: # }
992: #
993: # (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry,
994: # they're confirmed by the man page for the System V display---esr)
995: #
996: att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300,
997: am, xon,
998: cols#80, it#8, lines#24,
999: bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C,
1000: clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD,
1001: cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
1002: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1003: cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
1004: ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL,
1005: il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB,
1006: kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE,
1007: kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM,
1008: kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR,
1009: kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO,
1010: kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z,
1011: kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
1012: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf,
1013: ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd,
1014: kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
1015: kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B,
1016: kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv,
1017: kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt,
1018: kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB,
1019: ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM,
1020: rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m,
1021: smul=\E[4m,
1022:
1023: # Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is
1024: # from SGI's terminfo database. SGI's entry shows F9-F12 with the codes
1025: # for the application keypad mode. We have added iris-ansi-ap rather than
1026: # change the original to keypad mode.
1027: #
1028: # (iris-ansi: added rmam/smam based on init string -- esr)
1029: #
1030: # This entry, and those derived from it, is used in xwsh (also known as
1031: # winterm). Some capabilities that do not fit into the terminfo model
1032: # include the shift- and control-functionkeys:
1033: #
1034: # F1-F12 generate different codes when shift or control modifiers are used.
1035: # For example:
1036: # F1 \E[001q
1037: # shift F1 \E[013q
1038: # control-F1 \E[025q
1039: #
1040: # In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e.,
1041: # \EOP to \EOS. The shifted and control modifiers still do the same thing.
1042: #
1043: # The cursor keys also have different codes:
1044: # control-up \E[162q
1045: # control-down \E[165q
1046: # control-left \E[159q
1047: # control-right \E[168q
1048: #
1049: # shift-up \E[161q
1050: # shift-down \E[164q
1051: # shift-left \E[158q
1052: # shift-right \E[167q
1053: #
1054: # control-tab \[072q
1055: #
1056: iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100),
1057: am,
1058: cols#80, it#8, lines#40,
1059: bel=^G, bold=\E[1m, clear=\E[H\E[2J,
1060: cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD,
1061: cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC,
1062: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
1063: cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h,
1064: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
1065: home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1066: is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P,
1067: kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q,
1068: kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
1069: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
1070: kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q,
1071: kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q,
1072: kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
1073: kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
1074: knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q,
1075: kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\,
1076: rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
1077: sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m,
1078: tbc=\E[3g,
1079: iris-ansi-ap|IRIS ANSI in application-keypad mode,
1080: is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q,
1081: kf11=\E[011q, kf12=\E[012q, kf9=\E[009q,
1082: use=iris-ansi,
1083:
1084: # From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX
1085: # (T.Dickey 98/1/24)
1086: iris-color|xwsh|IRIX ANSI with color,
1087: ncv#33,
1088: csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m,
1089: ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m,
1090: rmul=\E[24m, rs1=\Ec,
1091: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1092: sitm=\E[3m, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
1093: use=klone+color, use=iris-ansi-ap,
1094:
1095: # The following is a version of the ibm-pc entry distributed with PC/IX,
1096: # (Interactive Systems' System 3 for the Big Blue), modified by Richard
1097: # McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original,
1098: # (the former is untrue, and the latter failed under UCB/man); standout and
1099: # underline modes have been added. Note: this entry describes the "native"
1100: # capabilities of the PC monochrome display, without ANY emulation; most
1101: # communications packages (but NOT PC/IX connect) do some kind of emulation.
1102: pcix|PC/IX console,
1103: am, bw, eo,
1104: cols#80, lines#24,
1105: clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1106: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1107: home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m,
1108: smul=\E[4m,
1109:
1110: # (ibmpcx: this entry used to be known as ibmx.
1111: # It formerly included the following extension capabilities:
1112: # :GC=b:GL=v:GR=t:RT=^J:\
1113: # :GH=\E[196g:GV=\E[179g:\
1114: # :GU=\E[193g:GD=\E[194g:\
1115: # :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\
1116: # :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\
1117: # :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\
1118: # I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate
1119: # ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match
1120: # what was there before. -- esr)
1121: ibmpcx|xenix|ibmx|IBM PC xenix console display,
1122: OTbs, am, msgr,
1123: cols#80, lines#25,
1124: clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C,
1125: cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
1126: ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H,
1127: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d,
1128: kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e,
1129: kpp=\E[Z,
1130: use=klone+acs, use=klone+sgr,
1131:
1.14 millert 1132: #### QNX
1133: #
1.11 millert 1134:
1135: # QNX 4.0 Console
1136: # Michael's original version of this entry had <am@>, <smcup=\Ei>,
1137: # <rmcup=\Eh\ER>; this was so terminfo applications could write the lower
1138: # right corner without triggering a scroll. The ncurses terminfo library can
1139: # handle this case with the <ich1> capability, and prefers <am> for better
1140: # optimization. Bug: The <op> capability resets attributes.
1141: # From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996
1142: # (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>)
1143: qnx|qnx4|qnx console,
1144: daisy, km, mir, msgr, xhpa, xt,
1145: colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8,
1146: acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263,
1147: bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ,
1148: cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1149: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2,
1150: dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee,
1151: il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263,
1152: kCMD=\377\267, kCPY=\377\363, kCRT=\377\364,
1153: kDL=\377\366, kEND=\377\301, kEOL=\377\311,
1154: kEXT=\377\367, kFND=\377\370, kHLP=\377\371,
1155: kHOM=\377\260, kIC=\377\340, kLFT=\377\264,
1156: kMOV=\377\306, kMSG=\377\304, kNXT=\377\272,
1157: kOPT=\377\372, kPRT=\377\275, kPRV=\377\262,
1158: kRDO=\377\315, kRES=\377\374, kRIT=\377\266,
1159: kRPL=\377\373, kSAV=\377\307, kSPD=\377\303,
1160: kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0,
1161: kclo=\377\343, kclr=\377\341, kcmd=\377\245,
1162: kcpy=\377\265, kcrt=\377\305, kctab=\377\237,
1163: kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246,
1164: kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274,
1165: ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320,
1166: kext=\377\270, kf1=\377\201, kf10=\377\212,
1167: kf11=\377\256, kf12=\377\257, kf13=\377\213,
1168: kf14=\377\214, kf15=\377\215, kf16=\377\216,
1169: kf17=\377\217, kf18=\377\220, kf19=\377\221,
1170: kf2=\377\202, kf20=\377\222, kf21=\377\223,
1171: kf22=\377\224, kf23=\377\333, kf24=\377\334,
1172: kf25=\377\225, kf26=\377\226, kf27=\377\227,
1173: kf28=\377\230, kf29=\377\231, kf3=\377\203,
1174: kf30=\377\232, kf31=\377\233, kf32=\377\234,
1175: kf33=\377\235, kf34=\377\236, kf35=\377\276,
1176: kf36=\377\277, kf37=\377\321, kf38=\377\322,
1177: kf39=\377\323, kf4=\377\204, kf40=\377\324,
1178: kf41=\377\325, kf42=\377\326, kf43=\377\327,
1179: kf44=\377\330, kf45=\377\331, kf46=\377\332,
1180: kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206,
1181: kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346,
1182: khlp=\377\350, khome=\377\240, khts=\377\342,
1183: kich1=\377\253, kil1=\377\273, kind=\377\261,
1184: kmov=\377\351, kmrk=\377\355, kmsg=\377\345,
1185: knp=\377\252, knxt=\377\312, kopn=\377\357,
1186: kopt=\377\353, kpp=\377\242, kprt=\377\255,
1187: kprv=\377\302, krdo=\377\336, kref=\377\354,
1188: kres=\377\360, krfr=\377\347, kri=\377\271,
1189: krmir=\377\313, krpl=\377\362, krst=\377\352,
1190: ksav=\377\361, kslt=\377\247, kspd=\377\335,
1191: ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER,
1192: rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER,
1193: rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d,
1194: setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei,
1195: smso=\E(, smul=\E[,
1196:
1197: # From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998
1198: # (esr: commented out <scp> and <rmcup> to avoid warnings.)
1199: # (TD: derive from original qnx4 entry)
1200: qnxt2|qnx 2.15 serial terminal,
1201: am,
1202: civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@,
1203: rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<,
1204: use=qnx4,
1205:
1206: #### NetBSD consoles
1207: #
1208: # pcvt termcap database entries (corresponding to release 3.31)
1209: # Author's last edit-date: [Fri Sep 15 20:29:10 1995]
1210: #
1211: # (For the terminfo master file, I translated these into terminfo syntax.
1212: # Then I dropped all the pseudo-HP entries. we don't want and can't use
1213: # the :Xs: flag. Then I split :is: into a size-independent <is1> and a
1214: # size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr)
1215:
1216: # NOTE: <ich1> has been taken out of this entry. for reference, it should
1217: # be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below.
1218: # (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583)
1219: pcvtXX|pcvt vt200 emulator (DEC VT220),
1220: am, km, mir, msgr, xenl,
1221: it#8, vt#3,
1222: acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~,
1223: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1224: clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
1225: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1226: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1227: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1228: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1229: el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1230: il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS,
1231: is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177,
1232: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1233: kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
1234: kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
1235: khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~,
1236: nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100,
1237: ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1238: rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
1239: rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1240: sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1241: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1242:
1243: # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1244: # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1245: # 50 lines entries; 80 columns
1246: pcvt25|dec vt220 emulation with 25 lines,
1247: cols#80, lines#25,
1248: is2=\E[1;25r\E[25;1H, use=pcvtXX,
1249: pcvt28|dec vt220 emulation with 28 lines,
1250: cols#80, lines#28,
1251: is2=\E[1;28r\E[28;1H, use=pcvtXX,
1252: pcvt35|dec vt220 emulation with 35 lines,
1253: cols#80, lines#35,
1254: is2=\E[1;35r\E[35;1H, use=pcvtXX,
1255: pcvt40|dec vt220 emulation with 40 lines,
1256: cols#80, lines#40,
1257: is2=\E[1;40r\E[40;1H, use=pcvtXX,
1258: pcvt43|dec vt220 emulation with 43 lines,
1259: cols#80, lines#43,
1260: is2=\E[1;43r\E[43;1H, use=pcvtXX,
1261: pcvt50|dec vt220 emulation with 50 lines,
1262: cols#80, lines#50,
1263: is2=\E[1;50r\E[50;1H, use=pcvtXX,
1264:
1265: # NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor)
1266: # termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and
1267: # 50 lines entries; 132 columns
1268: pcvt25w|dec vt220 emulation with 25 lines and 132 cols,
1269: cols#132, lines#25,
1270: is2=\E[1;25r\E[25;1H, use=pcvtXX,
1271: pcvt28w|dec vt220 emulation with 28 lines and 132 cols,
1272: cols#132, lines#28,
1273: is2=\E[1;28r\E[28;1H, use=pcvtXX,
1274: pcvt35w|dec vt220 emulation with 35 lines and 132 cols,
1275: cols#132, lines#35,
1276: is2=\E[1;35r\E[35;1H, use=pcvtXX,
1277: pcvt40w|dec vt220 emulation with 40 lines and 132 cols,
1278: cols#132, lines#40,
1279: is2=\E[1;40r\E[40;1H, use=pcvtXX,
1280: pcvt43w|dec vt220 emulation with 43 lines and 132 cols,
1281: cols#132, lines#43,
1282: is2=\E[1;43r\E[43;1H, use=pcvtXX,
1283: pcvt50w|dec vt220 emulation with 50 lines and 132 cols,
1284: cols#132, lines#50,
1285: is2=\E[1;50r\E[50;1H, use=pcvtXX,
1286:
1287: # Terminfo entries to enable the use of the ncurses library in colour on a
1288: # NetBSD-arm32 console (only tested on a RiscPC).
1289: # Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98
1290: # modified codes for setf/setb to setaf/setab, then to klone+color, corrected
1291: # typo in invis - TD
1292: arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480),
1293: am, bce, msgr, xenl, xon,
1294: cols#80, it#8, lines#30,
1295: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1296: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1297: clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1298: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1299: cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1300: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1301: cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1302: enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J,
1303: invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H,
1304: kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1305: kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x,
1306: kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v,
1307: kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[6m$<2>, ri=\EM$<5>,
1308: rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
1309: rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1310: sc=\E7,
1311: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
1312: sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1313: smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
1314: use=ecma+sgr, use=klone+color,
1315:
1316: arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768),
1317: cols#132, lines#50, use=arm100,
1318:
1319: # NetBSD/x68k console vt200 emulator. This port runs on a 68K machine
1320: # manufactured by Sharp for the Japenese market.
1321: # From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996
1322: x68k|x68k-ite|NetBSD/x68k ITE,
1323: cols#96, lines#32,
1324: kclr=\E[9~, khlp=\E[28~, use=vt220,
1325:
1326: # <tv@pobox.com>:
1327: # Entry for the DNARD OpenFirmware console, close to ANSI but not quite.
1328: #
1329: # (still unfinished, but good enough so far.)
1330: ofcons,
1331: bw,
1332: cols#80, lines#30,
1333: bel=^G, blink=\2337;2m, bold=\2331m, clear=^L, cr=^M,
1334: cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
1335: cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
1336: cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
1337: dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K,
1338: flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL,
1339: il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D,
1340: kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P,
1341: kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W,
1342: kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r,
1343: kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m,
1344: rmso=\2330m, rmul=\2330m, sgr0=\2330m,
1345:
1346: # NetBSD "wscons" emulator in vt220 mode
1347: # These are micro-minimal and probably need to be redone for real
1348: # after the manner of the pcvt entries.
1349: wsvt25|NetBSD wscons in 25 line DEC VT220 mode,
1350: cols#80, lines#25, use=vt220,
1351:
1352: wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta,
1353: km,
1354: cols#80, lines#25, use=vt220,
1355:
1356: # `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and
1357: # DECstation/pmax.
1358: rcons|BSD rasterconsole,
1359: use=sun-il,
1360: # Color version of above. Color currenly only provided by NetBSD.
1361: rcons-color|BSD rasterconsole with ANSI color,
1362: bce,
1363: colors#8, pairs#64,
1364: op=\E[m, setab=\E[4%dm, setaf=\E[3%dm, use=rcons,
1365:
1366: #### FreeBSD console entries
1367: #
1368: # From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996
1369: # Andrey Chernov maintains the FreeBSD termcap distributions.
1.1 millert 1370: #
1371: # Note: Users of FreeBSD 2.1.0 and older versions must either upgrade
1372: # or comment out the :cb: capability in the console entry.
1373: #
1374: # Alexander Lukyanov reports:
1375: # I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there.
1376: # Now el1 clears not only to the line beginning, but also a large chunk
1377: # of previous line. But there is another bug - ech does not work at all.
1378: #
1379:
1380: # for syscons
1381: # common entry without semigraphics
1382: # Bug: The <op> capability resets attributes.
1383: # Bug? The ech and el1 attributes appear to move the cursor in some cases; for
1384: # instance el1 does if the cursor is moved to the right margin first. Removed
1385: # by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K)
1386: #
1387: # Setting colors turns off reverse; we cannot guarantee order, so use ncv.
1388: # Note that this disables standout with color.
1389: cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode),
1390: am, bce, bw, eo, msgr, npc,
1.11 millert 1391: colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64,
1.1 millert 1392: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
1.11 millert 1393: cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
1394: cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
1395: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1396: cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m,
1397: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
1398: hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
1399: il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, kb2=\E[E,
1400: kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1401: kcuu1=\E[A, kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V,
1402: kf11=\E[W, kf12=\E[X, kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q,
1403: kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H,
1404: kich1=\E[L, knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rev=\E[7m,
1405: ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs1=\E[x\E[m\Ec,
1406: setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
1407: smso=\E[7m, vpa=\E[%i%p1%dd,
1.1 millert 1408: cons25|ansis|ansi80x25|freebsd console (25-line ansi mode),
1409: acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371,
1410: use=cons25w,
1411: cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode),
1412: colors@, pairs@,
1413: bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25,
1414: cons30|ansi80x30|freebsd console (30-line ansi mode),
1415: lines#30, use=cons25,
1416: cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode),
1417: lines#30, use=cons25-m,
1418: cons43|ansi80x43|freebsd console (43-line ansi mode),
1419: lines#43, use=cons25,
1420: cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode),
1421: lines#43, use=cons25-m,
1422: cons50|ansil|ansi80x50|freebsd console (50-line ansi mode),
1423: lines#50, use=cons25,
1424: cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode),
1425: lines#50, use=cons25-m,
1426: cons60|ansi80x60|freebsd console (60-line ansi mode),
1427: lines#60, use=cons25,
1428: cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode),
1429: lines#60, use=cons25-m,
1430: cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic,
1431: acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225,
1432: use=cons25w,
1433: cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono),
1434: colors@, pairs@,
1435: op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25r,
1436: cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines),
1437: lines#50, use=cons25r,
1438: cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono),
1439: lines#50, use=cons25r-m,
1440: cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines),
1441: lines#60, use=cons25r,
1442: cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono),
1443: lines#60, use=cons25r-m,
1444: # ISO 8859-1 FreeBSD console
1445: cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars,
1446: acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237,
1447: use=cons25w,
1448: cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono),
1449: colors@, pairs@,
1450: bold@, dim@, op@, rmul=\E[m, setab@, setaf@, smul=\E[4m, use=cons25l1,
1451: cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines),
1452: lines#50, use=cons25l1,
1453: cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono),
1454: lines#50, use=cons25l1-m,
1455: cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines),
1456: lines#60, use=cons25l1,
1457: cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono),
1458: lines#60, use=cons25l1-m,
1459:
1460: #### 386BSD and BSD/OS Consoles
1461: #
1462:
1463: # This was the original 386BSD console entry (I think).
1464: # Some places it's named oldpc3|oldibmpc3.
1465: # From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu>
1466: origpc3|origibmpc3|IBM PC 386BSD Console,
1.11 millert 1467: OTbs, am, bw, eo, xon,
1.1 millert 1468: cols#80, lines#25,
1.11 millert 1469: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
1.1 millert 1470: bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C,
1.11 millert 1471: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1472: home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
1473: kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x,
1474: rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x,
1475: smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x,
1.1 millert 1476:
1477: # description of BSD/386 console emulator in version 1.0 (supplied by BSDI)
1478: oldpc3|oldibmpc3|old IBM PC BSD/386 Console,
1.11 millert 1479: OTbs, km,
1.1 millert 1480: lines#25,
1.11 millert 1481: bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M,
1482: ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
1483: kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F,
1484: knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R,
1.1 millert 1485:
1486: # Description of BSD/OS console emulator in version 1.1, 2.0, 2.1
1487: # Note, the emulator supports many of the additional console features
1488: # listed in the iBCS2 (e.g. character-set selection) though not all
1489: # are described here. This entry really ought to be upgraded.
1490: # Also note, the console will also work with fewer lines after doing
1491: # "stty rows NN", e.g. to use 24 lines.
1492: # (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996)
1493: # Bug: The <op> capability resets attributes.
1.11 millert 1494: bsdos-pc-nobold|BSD/OS PC console w/o bold,
1495: OTbs, am, eo, km, xon,
1496: cols#80, it#8, lines#25,
1497: bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H,
1498: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1499: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1500: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
1.1 millert 1501: il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D,
1.11 millert 1502: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L,
1503: kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7,
1504: sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;,
1505: use=klone+sgr, use=klone+color,
1506: bsdos-pc|IBM PC BSD/OS Console,
1507: sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, use=bsdos-pc-nobold,
1508:
1509: # Old names for BSD/OS PC console used in releases before 4.1.
1510: pc3|BSD/OS on the PC Console,
1511: use=bsdos-pc-nobold,
1512: ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline,
1513: use=bsdos-pc,
1514:
1515: # BSD/OS on the SPARC
1516: bsdos-sparc|Sun SPARC BSD/OS Console,
1517: use=sun,
1518:
1519: # BSD/OS on the PowerPC
1520: bsdos-ppc|PowerPC BSD/OS Console,
1521: use=bsdos-pc,
1.1 millert 1522:
1.14 millert 1523: #### DEC VT52
1524: # (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr)
1525: vt52|dec vt52,
1526: OTbs,
1527: cols#80, it#8, lines#24,
1528: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1529: bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
1530: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
1531: el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
1532: kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
1533:
1.1 millert 1534: #### DEC VT100 and compatibles
1535: #
1.14 millert 1536: # DEC terminals from the vt100 forward are collected here. Older DEC terminals
1537: # and micro consoles can be found in the `obsolete' section. More details on
1.1 millert 1538: # the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be
1539: # found near the end of this file.
1540: #
1541: # Except where noted, these entries are DEC's official terminfos.
1542: # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
1543: # Engineering for more information. Updated terminfos and termcaps
1544: # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
1545: #
1546: # In October 1995 DEC sold its terminals business, including the VT and Dorio
1547: # line and trademark, to SunRiver Data Systems. SunRiver has since changed
1548: # its name to Boundless Technologies; see http://www.boundless.com.
1549: #
1550:
1551: # NOTE: Any VT100 emulation, whether in hardware or software, almost
1552: # certainly includes what DEC called the `Level 1 editing extension' codes;
1553: # only the very oldest VT100s lacked these and there probably aren't any of
1554: # those left alive. To capture these, use one of the VT102 entries.
1555: #
1556: # Note that the <xenl> glitch in vt100 is not quite the same as on the Concept,
1557: # since the cursor is left in a different position while in the
1558: # weird state (concept at beginning of next line, vt100 at end
1559: # of this line) so all versions of vi before 3.7 don't handle
1560: # <xenl> right on vt100. The correct way to handle <xenl> is when
1561: # you output the char in column 80, immediately output CR LF
1562: # and then assume you are in column 1 of the next line. If <xenl>
1563: # is on, am should be on too.
1564: #
1565: # I assume you have smooth scroll off or are at a slow enough baud
1566: # rate that it doesn't matter (1200? or less). Also this assumes
1567: # that you set auto-nl to "on", if you set it off use vt100-nam
1568: # below.
1569: #
1570: # The padding requirements listed here are guesses. It is strongly
1571: # recommended that xon/xoff be enabled, as this is assumed here.
1572: #
1573: # The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the
1574: # tab settings are in non-volatile memory and don't need to be
1575: # reset upon login. Also setting the number of columns glitches
1576: # the screen annoyingly. You can type "reset" to get them set.
1577: #
1.14 millert 1578: # The VT100 series terminals have cursor ("arrows") keys which can operate
1579: # in two different modes: Cursor Mode and Application Mode. Cursor Mode
1580: # is the reset state, and is assumed to be the normal state. Application
1581: # Mode is the "set" state. In Cursor Mode, the cursor keys transmit
1582: # "Esc [ {code}" sequences, conforming to ANSI standards. In Application
1583: # Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode
1584: # was provided primarily as an aid to the porting of VT52 applications. It is
1585: # assumed that the cursor keys are normally in Cursor Mode, and expected that
1586: # applications such as vi will always transmit the <smkx> string. Therefore,
1587: # the definitions for the cursor keys are made to match what the terminal
1588: # transmits after the <smkx> string is transmitted. If the <smkx> string
1589: # is a null string or is not defined, then cursor keys are assumed to be in
1590: # "Cursor Mode", and the cursor keys definitions should match that assumption,
1591: # else the application may fail. It is also expected that applications will
1592: # always transmit the <rmkx> string to the terminal before they exit.
1593: #
1594: # The VT100 series terminals have an auxiliary keypad, commonly referred to as
1595: # the "Numeric Keypad", because it is a cluster of numeric and function keys.
1596: # The Numeric Keypad which can operate in two different modes: Numeric Mode and
1597: # Application Mode. Numeric Mode is the reset state, and is assumed to be
1598: # the normal state. Application Mode is the "set" state. In Numeric Mode,
1599: # the numeric and punctuation keys transmit ASCII 7-bit characters, and the
1600: # Enter key transmits the same as the Return key (Note: the Return key
1601: # can be configured to send either LF (\015) or CR LF). In Application Mode,
1602: # all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys
1603: # always send the same "Esc O {code}" sequences. It is assumed that the keypad
1604: # is normally in Numeric Mode. If an application requires that the keypad be
1605: # in Application Mode then it is expected that the user, or the application,
1606: # will set the TERM environment variable to point to a terminfo entry which has
1607: # defined the <smkx> string to include the codes that switch the keypad into
1608: # Application Mode, and the terminfo entry will also define function key
1609: # fields to match the Application Mode control codes. If the <smkx> string
1610: # is a null string or is not defined, then the keypad is assumed to be in
1611: # Numeric Mode. If the <smkx> string switches the keypad into Application
1612: # Mode, it is expected that the <rmkx> string will contain the control codes
1613: # necessary to reset the keypad to "Normal" mode, and it is also expected that
1614: # applications which transmit the <smkx> string will also always transmit the
1615: # <rmkx> string to the terminal before they exit.
1616: #
1.1 millert 1617: # Here's a diagram of the VT100 keypad keys with their bindings.
1618: # The top line is the name of the key (some DEC keyboards have the keys
1619: # labelled somewhat differently, like GOLD instead of PF1, but this is
1620: # the most "official" name). The second line is the escape sequence it
1621: # generates in Application Keypad mode (where "$" means the ESC
1622: # character). The third line contains two items, first the mapping of
1623: # the key in terminfo, and then in termcap.
1624: # _______________________________________
1625: # | PF1 | PF2 | PF3 | PF4 |
1626: # | $OP | $OQ | $OR | $OS |
1627: # |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_|
1628: # | 7 8 9 - |
1629: # | $Ow | $Ox | $Oy | $Om |
1630: # |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________|
1631: # | 4 | 5 | 6 | , |
1632: # | $Ot | $Ou | $Ov | $Ol |
1633: # |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_|
1634: # | 1 | 2 | 3 | |
1635: # | $Oq | $Or | $Os | enter |
1636: # |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM |
1637: # | 0 | . | |
1638: # | $Op | $On | |
1639: # |___kc1_______K4____|_kc3__K5_|_kent_@8_|
1640: #
1641: # And here, for those of you with orphaned VT100s lacking documentation, is
1642: # a description of the soft switches invoked when you do `Set Up'.
1643: #
1644: # Scroll 0-Jump Shifted 3 0-#
1645: # | 1-Smooth | 1-British pound sign
1646: # | Autorepeat 0-Off | Wrap Around 0-Off
1647: # | | 1-On | | 1-On
1648: # | | Screen 0-Dark Bkg | | New Line 0-Off
1649: # | | | 1-Light Bkg | | | 1-On
1650: # | | | Cursor 0-Underline | | | Interlace 0-Off
1651: # | | | | 1-Block | | | | 1-On
1652: # | | | | | | | |
1653: # 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings
1654: # | | | | | | | |
1655: # | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz
1656: # | | | 1-On | | | 1-50 Hz
1657: # | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits
1658: # | | 1-ANSI | | 1-8 Bits
1659: # | Keyclick 0-Off | Parity 0-Off
1660: # | 1-On | 1-On
1661: # Margin Bell 0-Off Parity Sense 0-Odd
1662: # 1-On 1-Even
1663: #
1664: # The following SET-UP modes are assumed for normal operation:
1665: # ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS
1666: # WRAP_AROUND_ON JUMP_SCROLL_OFF
1667: # Other SET-UP modes may be set for operator convenience or communication
1668: # requirements; I recommend
1669: # AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_#
1670: # Unless you have a graphics add-on such as Digital Engineering's VT640
1671: # (and even then, whenever it can be arranged!) you should set
1672: # INTERLACE_OFF
1673: #
1674: # (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr)
1.11 millert 1675: vt100|vt100-am|dec vt100 (w/advanced video),
1.1 millert 1676: OTbs, am, msgr, xenl, xon,
1.11 millert 1677: cols#80, it#8, lines#24, vt#3,
1678: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1679: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
1680: clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1681: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
1682: cuf=\E[%p1%dC, cuf1=\E[C$<2>,
1683: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
1684: cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
1685: enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, ka1=\EOq,
1686: ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD,
1687: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy,
1688: kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
1689: kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
1690: rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
1691: rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
1692: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1693: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
1694: sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
1695: smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
1696: vt100nam|vt100-nam|vt100 no automargins,
1697: am@, xenl@, use=vt100-am,
1698: vt100-vb|dec vt100 (w/advanced video) & no beep,
1699: bel@, flash=\E[?5h\E[?5l, use=vt100,
1.1 millert 1700:
1701: # Ordinary vt100 in 132 column ("wide") mode.
1.11 millert 1702: vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video),
1703: cols#132, lines#24,
1704: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am,
1705: vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin),
1706: cols#132, lines#14, vt@,
1707: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam,
1.1 millert 1708:
1709: # vt100 with no advanced video.
1.11 millert 1710: vt100-nav|vt100 without advanced video option,
1711: xmc#1,
1712: blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m,
1713: smul@,
1714: use=vt100,
1715: vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option),
1716: cols#132, lines#14, use=vt100-nav,
1.1 millert 1717:
1718: # vt100 with one of the 24 lines used as a status line.
1719: # We put the status line on the top.
1.11 millert 1720: vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline,
1721: eslok, hs,
1722: lines#23,
1723: clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr,
1724: cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8,
1725: fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8,
1726: tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am,
1.1 millert 1727:
1728: # Status line at bottom.
1729: # Clearing the screen will clobber status line.
1.11 millert 1730: vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline,
1731: eslok, hs,
1732: lines#23,
1733: dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H,
1734: tsl=\E7\E[24;%p1%dH\E[1K,
1735: use=vt100-am,
1.1 millert 1736:
1737: # Most of the `vt100' emulators out there actually emulate a vt102
1738: # This entry (or vt102-nsgr) is probably the right thing to use for
1739: # these.
1.11 millert 1740: vt102|dec vt102,
1741: mir,
1742: dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, use=vt100,
1743: vt102-w|dec vt102 in wide mode,
1744: cols#132,
1745: rs3=\E[?3h, use=vt102,
1.1 millert 1746:
1747: # Many brain-dead PC comm programs that pretend to be `vt100-compatible'
1748: # fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0>
1749: # string in the canonical vt100 entry above leaves the screen littered
1750: # with little snowflake or star characters (IBM PC ROM character \017 = ^O)
1751: # after highlight turnoffs. This entry should fix that, and even leave
1752: # ACS support working, at the cost of making multiple-highlight changes
1753: # slightly more expensive.
1754: # From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995
1.11 millert 1755: vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes),
1756: sgr@, sgr0=\E[m,
1757: use=vt102,
1.1 millert 1758:
1759: # VT125 Graphics CRT. Clear screen also erases graphics
1.11 millert 1760: vt125|vt125 graphics terminal,
1.1 millert 1761: clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100,
1762:
1763: # This isn't a DEC entry, it came from University of Wisconsin.
1764: # (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr)
1765: vt131|dec vt131,
1766: OTbs, am, xenl,
1767: cols#80, it#8, lines#24, vt#3,
1768: bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
1.11 millert 1769: clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1770: cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
1771: cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
1772: ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
1773: is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
1774: kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
1775: kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>,
1776: rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>,
1777: rmul=\E[m$<2/>,
1.1 millert 1778: rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1.11 millert 1779: sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=,
1.1 millert 1780: smso=\E[7m$<2/>, smul=\E[4m$<2/>,
1781:
1782: # vt132 - like vt100 but slower and has ins/del line and such.
1783: # I'm told that <smir>/<rmir> are backwards in the terminal from the
1784: # manual and from the ANSI standard, this describes the actual
1785: # terminal. I've never actually used a vt132 myself, so this
1786: # is untested.
1787: #
1.11 millert 1788: vt132|DEC vt132,
1789: xenl,
1790: dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
1791: ip=$<7>, rmir=\E[4h, smir=\E[4l,
1792: use=vt100,
1.1 millert 1793:
1794: # This vt220 description maps F5--F9 to the second block of function keys
1795: # at the top of the keyboard. The "DO" key is used as F10 to avoid conflict
1796: # with the key marked (ESC) on the vt220. See vt220d for an alternate mapping.
1797: # PF1--PF4 are used as F1--F4.
1798: #
1.18 millert 1799: vt220-old|vt200-old|DEC VT220 in vt100 emulation mode,
1.17 millert 1800: OTbs, OTpt, am, mir, xenl, xon,
1.11 millert 1801: cols#80, lines#24, vt#3,
1.19 millert 1802: OTnl=^J,
1.1 millert 1803: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.11 millert 1804: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l,
1805: clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M,
1806: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
1807: cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
1808: dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
1809: if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>,
1.15 millert 1810: is2=\E[1;24r\E[24;1H, kbs=\177, kcub1=\EOD, kcud1=\EOB,
1811: kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kend=\E[4~, kf1=\EOP,
1.11 millert 1812: kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~,
1813: kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~,
1814: khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8,
1815: rev=\E[7m$<2>, rf=/usr/share/tabset/vt100,
1816: ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
1817: rmso=\E[27m, rmul=\E[24m,
1818: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
1819: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
1820: sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
1821: smso=\E[7m, smul=\E[4m,
1.14 millert 1822:
1.18 millert 1823: # A much better description of the VT200/220; used to be vt220-8
1.19 millert 1824: # changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1
1825: # designation to accommodate bug in pcvt -TD
1.18 millert 1826: vt220|vt200|dec vt220,
1.17 millert 1827: OTbs, am, mc5i, mir, msgr, xenl, xon,
1.14 millert 1828: cols#80, it#8, lines#24, vt#3,
1829: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1830: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
1831: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1832: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1833: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1834: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1835: ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
1836: flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH,
1837: ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
1838: il=\E[%p1%dL, il1=\E[L, ind=\ED,
1.15 millert 1839: is2=\E[?7h\E[>\E[?1h\E F\E[?4l, kbs=\177, kcub1=\EOD,
1840: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf10=\E[21~,
1.14 millert 1841: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1842: kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
1843: kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
1844: kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
1845: khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~,
1846: kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[i,
1847: mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
1.19 millert 1848: rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m,
1849: rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=\E(0$<2>,
1.14 millert 1850: smam=\E[?7h, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1.11 millert 1851: vt220-w|vt200-w|DEC vt220 in wide mode,
1852: cols#132,
1853: rs3=\E[?3h, use=vt220,
1.14 millert 1854: vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode,
1.18 millert 1855: OTbs, am, mc5i, mir, msgr, xenl, xon,
1.14 millert 1856: cols#80, it#8, lines#24, vt#3,
1857: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1858: bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M,
1859: csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
1860: cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
1861: cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
1862: dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
1863: ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0,
1864: flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH,
1865: ich=\233%p1%d@, if=/usr/share/tabset/vt100,
1866: il=\233%p1%dL, il1=\233L, ind=\ED,
1.15 millert 1867: is2=\233?7h\233>\233?1h\E F\233?4l, kbs=\177,
1.14 millert 1868: kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
1869: kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
1870: kf13=\23325~, kf14=\23326~, kf17=\23331~, kf18=\23332~,
1871: kf19=\23333~, kf2=\EOQ, kf20=\23334~, kf3=\EOR, kf4=\EOS,
1872: kf6=\23317~, kf7=\23318~, kf8=\23319~, kf9=\23320~,
1873: kfnd=\2331~, khlp=\23328~, khome=\233H, kich1=\2332~,
1874: knp=\2336~, kpp=\2335~, krdo=\23329~, kslt=\2334~, lf1=pf1,
1875: lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i,
1876: nel=\EE, rc=\E8, rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l,
1877: rmir=\2334l, rmso=\23327m, rmul=\23324m, rs1=\233?3l,
1878: sc=\E7, sgr0=\233m, smacs=^N, smam=\233?7h, smir=\2334h,
1879: smso=\2337m, smul=\2334m, tbc=\2333g,
1.1 millert 1880:
1881: #
1882: # vt220d:
1883: # This vt220 description regards F6--F10 as the second block of function keys
1884: # at the top of the keyboard. This mapping follows the description given
1885: # in the VT220 Programmer Reference Manual and agrees with the labeling
1886: # on some terminals that emulate the vt220. There is no support for an F5.
1887: # See vt220 for an alternate mapping.
1888: #
1.11 millert 1889: vt220d|DEC VT220 in vt100 mode with DEC function key labeling,
1890: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
1891: kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
1892: kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~,
1893: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1.14 millert 1894: use=vt220-old,
1.11 millert 1895:
1896: vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins,
1897: am@,
1898: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
1.1 millert 1899:
1900: # vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko
1901: # (not an official DEC entry!)
1902: # The problem with real vt220 terminals is they don't send escapes when in
1903: # in vt220 mode. This can be gotten around two ways. 1> don't send
1904: # escapes or 2> put the vt220 into vt100 mode and use all the nifty
1905: # features of vt100 advanced video which it then has.
1906: #
1907: # This entry takes the view of putting a vt220 into vt100 mode so
1908: # you can use the escape key in emacs and everything else which needs it.
1909: #
1910: # You probably don't want to use this on a VMS machine since VMS will think
1911: # it has a vt220 and will get fouled up coming out of emacs
1912: #
1913: # From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996
1.14 millert 1914: # (Added vt100 <rc>,<sc> to quiet a tic warning -- esr)
1.1 millert 1915: vt200-js|vt220-js|dec vt200 series with jump scroll,
1916: am,
1917: cols#80,
1.11 millert 1918: bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
1919: cub1=^H, cud1=^J, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
1920: dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
1.1 millert 1921: il1=\E[L, ind=\ED,
1922: is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1l\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m,
1.15 millert 1923: kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1.14 millert 1924: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8,
1.11 millert 1925: rf=/usr/lib/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l,
1926: rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m,
1.14 millert 1927: rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=,
1.11 millert 1928: smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m,
1.1 millert 1929:
1930: # This was DEC's vt320. Use the purpose-built one below instead
1931: #vt320|DEC VT320 in vt100 emulation mode,
1932: # use=vt220,
1933:
1934: #
1935: # Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam.
1936: #
1.11 millert 1937: vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode,
1938: am@,
1939: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220,
1.1 millert 1940:
1941: # These entries are not DEC's official ones, they were purpose-built for the
1942: # VT320. Here are the designer's notes:
1943: # <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to
1944: # 'Erase to End of Field'... since nothing seems to use 'end' anyways...
1945: # khome is Home on a PC kbd. Actually 'FIND' on a VT.
1946: # Things that use <knxt> usually use tab anyways... and things that don't use
1947: # tab usually use <knxt> instead...
1948: # kprv is same as tab - Backtab is useless...
1949: # I left out <sgr> because of its RIDICULOUS complexity,
1950: # and the resulting fact that it causes the termcap translation of the entry
1951: # to SMASH the 1k-barrier...
1.14 millert 1952: # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
1.1 millert 1953: # (vt320: uncommented <fsl> --esr)
1.11 millert 1954: vt320|vt300|dec vt320 7 bit terminal,
1955: am, eslok, hs, mir, msgr, xenl,
1956: cols#80, lines#24, wsl#80,
1957: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1958: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
1959: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
1960: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
1961: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
1962: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1963: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1964: ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, fsl=\E[0$},
1965: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL,
1966: il1=\E[L, ind=\ED,
1967: is2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1968: ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=\177, kc1=\EOq, kc3=\EOs,
1969: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1970: kdch1=\E[3~, kel=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
1971: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
1972: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
1973: kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
1974: kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1975: khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, kpp=\E[5~,
1976: kprv=\E[Z, kslt=\E[4~, mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i,
1977: nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt300,
1978: ri=\EM, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l,
1979: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1980: rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1981: sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
1982: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1983: tsl=\E[1$}\E[H\E[K,
1984: vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy,
1985: am@,
1986: is2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
1987: rs2=\E>\E[?3l\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
1988: use=vt320,
1.1 millert 1989: # We have to init 132-col mode, not 80-col mode.
1.11 millert 1990: vt320-w|vt300-w|dec vt320 wide 7 bit terminal,
1991: cols#132, wsl#132,
1992: is2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1993: rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1994: use=vt320,
1995: vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am,
1996: am@,
1997: is2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
1998: rs2=\E>\E[?3h\E[?4l\E[5?l\E[?7l\E[?8h\E[1;24r\E[24;1H,
1999: use=vt320-w,
1.1 millert 2000:
2001: # VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals
2002: # which are pretty much a superset of the VT320. They have the
2003: # host writable status line, yet another different DRCS matrix size,
2004: # and such, but they add the DEC Technical character set, Multiple text
2005: # pages, selectable length pages, and the like. The difference between
2006: # the vt330 and vt340 is that the latter has only 2 planes and a monochrome
2007: # monitor, the former has 4 planes and a color monitor. These terminals
2008: # support VT131 and ANSI block mode, but as with much of these things,
2009: # termcap/terminfo doesn't deal with these features.
2010: #
2011: # Note that this entry is are set up in what was the standard way for GNU
2012: # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2013: # keys were switched into application mode at the same time the numeric pad
2014: # is switched into application mode. This changes the definitions of the
2015: # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2016: # your termcap or terminfo entry,
2017: #
2018: # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2019: # (vt340: string capability "sb=\E[M" corrected to "sr";
2020: # also, added <rmam>/<smam> based on the init string -- esr)
2021: vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page,
2022: am, eslok, hs, mir, msgr, xenl, xon,
2023: cols#80, it#8, lines#24, vt#3,
1.11 millert 2024: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2025: blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2026: cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2027: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
2028: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2029: cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[?25h, dch=\E[%p1%dP,
2030: dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
1.1 millert 2031: dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
1.11 millert 2032: flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, home=\E[H, ht=^I,
2033: hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
1.1 millert 2034: is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1.15 millert 2035: kbs==177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1.11 millert 2036: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2037: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2038: lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2039: rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O,
2040: rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2041: rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
2042: smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
2043: smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
1.1 millert 2044:
2045: # DEC doesn't supply a vt400 description, so we add Daniel Glasser's
2046: # (originally written with vt420 as its primary name, and usable for it).
2047: #
2048: # VT400/420 -- This terminal is a superset of the vt320. It adds the multiple
2049: # text pages and long text pages with selectable length of the vt340, along
2050: # with left and right margins, rectangular area text copy, fill, and erase
2051: # operations, selected region character attribute change operations,
2052: # page memory and rectangle checksums, insert/delete column, reception
2053: # macros, and other features too numerous to remember right now. TERMCAP
2054: # can only take advantage of a few of these added features.
2055: #
2056: # Note that this entry is are set up in what was the standard way for GNU
2057: # Emacs v18 terminal modes to deal with the cursor keys in that the arrow
2058: # keys were switched into application mode at the same time the numeric pad
2059: # is switched into application mode. This changes the definitions of the
2060: # arrow keys. Emacs v19 is smarter and mines its keys directly out of
2061: # your termcap entry,
2062: #
2063: # From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993
2064: # (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:";
2065: # also, added <rmam>/<smam> based on the init string -- esr)
2066: vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap,
2067: am, eslok, hs, mir, msgr, xenl, xon,
2068: cols#80, it#8, lines#24, vt#3,
1.11 millert 2069: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.1 millert 2070: blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2071: clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M,
2072: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2073: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2074: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.11 millert 2075: cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2076: dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>,
1.1 millert 2077: el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$},
1.11 millert 2078: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2079: il=\E[%p1%dL, il1=\E[L, ind=\ED,
1.1 millert 2080: is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1.15 millert 2081: kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1.11 millert 2082: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
2083: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
2084: lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
2085: rf=/usr/share/tabset/vt300, ri=\EM, rmacs=^O,
2086: rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
2087: rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, sgr0=\E[m,
2088: smacs=^N, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
2089: smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1.1 millert 2090: tsl=\E[2$~\E[1$}\E[1;%dH,
2091:
2092: # (vt420: I removed <kf0>, it collided with <kf10>. I also restored
2093: # a missing <sc> -- esr)
1.11 millert 2094: vt420|DEC VT420,
2095: am, mir, xenl, xon,
2096: cols#80, lines#24, vt#3,
2097: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2098: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2099: clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2100: cub1=^H, cud1=\E[B, cuf1=\E[C,
2101: cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2102: dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2103: if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
1.15 millert 2104: is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177,
1.11 millert 2105: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
2106: kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2107: kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2108: kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2109: kslt=\E[4~, rc=\E8, rev=\E[7m$<2>,
2110: rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B$<4>,
2111: rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
2112: rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2113: rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2114: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
2115: sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2116: smkx=\E=, smso=\E[7m, smul=\E[4m,
1.1 millert 2117:
2118: #
2119: # DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx)
2120: # takes two parameters, the key and the string. Translating the key is
2121: # straightforward (keys 1-5 are not defined on real terminals, though some
2122: # emulators define these):
2123: #
2124: # if (key < 16) then value = key;
2125: # else if (key < 21) then value = key + 1;
2126: # else if (key < 25) then value = key + 2;
2127: # else if (key < 27) then value = key + 3;
2128: # else if (key < 30) then value = key + 4;
2129: # else value = key + 5;
2130: #
2131: # The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT".
2132: # There's no provision in terminfo for emitting a string in this format, so the
2133: # application has to know it.
2134: #
1.11 millert 2135: vt420pc|DEC VT420 w/PC keyboard,
2136: kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~,
2137: kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~,
2138: kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~,
2139: kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~,
2140: kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~,
2141: kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~,
2142: kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~,
2143: kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~,
2144: kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~,
2145: kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~,
2146: kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~,
2147: kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~,
2148: kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2149: kf8=\E[19~, kf9=\E[20~, khome=\E[H,
2150: pctrm=USR_TERM\:vt420pcdos\:,
2151: pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, use=vt420,
2152:
2153: vt420pcdos|DEC VT420 w/PC for DOS Merge,
2154: lines#25,
2155: dispc=%?%p2%{19}%=%t\E\023\021%e%p2%{32}%<%t\E%p2%c%e%p2%{127}%=%t\E\177%e%p2%c%;,
2156: pctrm@,
2157: rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@,
2158: sgr0=\E[m, smsc=\E[?1;2r\E[34h,
2159: use=vt420pc,
2160:
2161: vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys,
2162: kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
2163: kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2164: kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
2165: kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2166: kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2167: khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS,
2168: use=vt420,
2169:
2170: vt510|DEC VT510,
2171: use=vt420,
2172: vt510pc|DEC VT510 w/PC keyboard,
2173: use=vt420pc,
2174: vt510pcdos|DEC VT510 w/PC for DOS Merge,
2175: use=vt420pcdos,
1.1 millert 2176:
2177: # VT520/VT525
2178: #
2179: # The VT520 is a monochrome text terminal capable of managing up to
2180: # four independent sessions in the terminal. It has multiple ANSI
2181: # emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console)
2182: # and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950,
2183: # 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only.
2184: #
2185: # Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or
2186: # [Alt]/[Print Screen] depending upon which keyboard and which
2187: # terminal mode is being used. If Set-Up has been disabled or
2188: # assigned to an unknown key, Set-Up may be entered by pressing
2189: # [F3] as the first key after power up, regardless of keyboard type.
2190: # (vt520: I added <rmam>/<smam> based on the init string, also <sc> -- esr)
1.11 millert 2191: vt520|DEC VT520,
2192: am, mir, xenl, xon,
2193: cols#80, lines#24, vt#3,
2194: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2195: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2196: clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2197: cub1=^H, cud1=\E[B, cuf1=\E[C,
2198: cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2199: dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2200: if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
1.15 millert 2201: is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177,
1.11 millert 2202: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1.13 millert 2203: kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2204: kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2205: kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2206: kslt=\E[4~,
1.11 millert 2207: pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2208: rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2209: ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2210: rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2211: rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2212: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
2213: sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2214: smso=\E[7m, smul=\E[4m,
1.1 millert 2215:
2216: # (vt525: I added <rmam>/<smam> based on the init string;
2217: # removed <rmso>=\E[m, <rmul>=\E[m, added <sc> -- esr)
1.11 millert 2218: vt525|DEC VT525,
2219: am, mir, xenl, xon,
2220: cols#80, lines#24, vt#3,
2221: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2222: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
2223: clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
2224: cub1=^H, cud1=\E[B, cuf1=\E[C,
2225: cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P,
2226: dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
2227: if=/usr/share/tabset/vt300, il1=\E[L, ind=\ED,
1.15 millert 2228: is2=\E[1;24r\E[24;1H, is3=\E[?67h\E[64;1"p, kbs=\177,
1.11 millert 2229: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1.13 millert 2230: kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, kf2=\EOQ, kf3=\EOR,
2231: kf4=\EOS, kf5=\E[17~, kf6=\E[18~, kf7=\E[19~, kf8=\E[20~,
2232: kf9=\E[21~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
2233: kslt=\E[4~,
1.11 millert 2234: pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\,
2235: rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300,
2236: ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l,
2237: rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
2238: rmso=\E[m, rmul=\E[m, rs3=\E[?67h\E[64;1"p, sc=\E7,
2239: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
2240: sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h,
2241: smso=\E[7m, smul=\E[4m,
1.1 millert 2242:
2243: #### VT100 emulations
2244: #
2245:
2246: # John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows
2247: # (the best Windows telnet as of September 1995) presents the name `dec-vt100'
2248: # to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us
2249: # that this works best with a stock vt100 entry.
1.11 millert 2250: dec-vt100|EWAN telnet's vt100 emulation,
2251: use=vt100,
1.1 millert 2252:
2253: # From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996
1.11 millert 2254: dec-vt220|DOS tnvt200 terminal emulator,
2255: am@, use=vt220,
1.1 millert 2256:
2257: # Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to
2258: # anyone who needs PC VT340 emulation. (or anything below that level, for
2259: # that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's
2260: # RDBM systems, it includes ReGIS and SiXel support! I'm impressed...
2261: # I can send the address if requested.
2262: # (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr)
1.14 millert 2263: # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
1.11 millert 2264: z340|zstem vt340 terminal emulator 132col 42line,
2265: lines#42,
2266: is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2267: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H,
2268: use=vt320-w,
2269: z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins),
2270: am@,
2271: is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2272: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H,
2273: use=z340,
2274:
2275: # CRT is shareware. It implements some xterm features, including mouse.
2276: crt|crt-vt220|CRT 2.3 emulating VT220,
2277: bce, msgr,
1.20 ! millert 2278: ncv@,
! 2279: hts=\EH, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, use=vt220, use=ecma+color,
1.11 millert 2280:
2281: # This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by
2282: # T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator
2283: # (communication program) which supports:
2284: #
2285: # - Serial port connections.
2286: # - TCP/IP (telnet) connections.
2287: # - VT100 emulation, and selected VT200/300 emulation.
2288: # - TEK4010 emulation.
2289: # - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and
2290: # Quick-VAN).
2291: # - Scripts using the "Tera Term Language".
2292: # - Japanese and Russian character sets.
2293: #
2294: # The program does not come with terminfo or termcap entries. However, the
2295: # emulation (testing with vttest and ncurses) is reasonably close to vt100 (no
2296: # vt52 or doublesize character support; blinking is done with color). Besides
2297: # the HPA, VPA extensions it also implements CPL and CNL.
2298: #
2299: # All of the function keys can be remapped. This description shows the default
2300: # mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys
2301: # are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad
2302: # is laid out like vt220, rather than the face codes on the PC keyboard, i.e,
2303: # kfnd Insert
2304: # kslt Delete
2305: # kich1 Home
2306: # kdch1 PageUp
2307: # kpp End
2308: # knp PageDown
2309: #
2310: # ANSI colors are implemented, but cannot be combined with video attributes
2311: # except for reverse.
2312: #
2313: # No fonts are supplied with the program, so the acsc string is chosen to
2314: # correspond with the default Microsoft terminal font.
2315: #
2316: # Tera Term recognizes some xterm sequences, including those for setting and
2317: # retrieving the window title, and for setting the window size (i.e., using
2318: # "resize -s"), though it does not pass SIGWINCH to the application if the
2319: # user resizes the window with the mouse.
2320: teraterm|Tera Term Pro,
2321: km, xon@,
2322: ncv#43, vt@,
2323: acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2324: blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J,
2325: cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2326: cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2327: dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
2328: flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG,
2329: il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~,
2330: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
2331: kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
2332: kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~,
2333: kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2334: kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~,
2335: kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM,
2336: rmso=\E[27m, rmul=\E[24m, sgr0=\E[m, smso=\E[7m,
2337: smul=\E[4m, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
2338: vpa=\E[%i%p1%dd,
2339: use=klone+color, use=vt100,
2340:
2341: # Tested with WinNT 4.0, the telnet application assumes the screensize is
2342: # 25x80. This entry uses the 'Terminal' font, to get line-drawing characters.
2343: ms-vt100|MS telnet imitating dec vt100,
2344: lines#25,
2345: acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376,
2346: tbc@, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?6c, u9=\E[c,
2347: use=vt100,
1.1 millert 2348:
2349: #### X terminal emulators
2350: #
2351: # You can add the following line to your .Xdefaults to change the terminal type
2352: # set by the xterms you start up to my-xterm:
2353: #
2354: # *termName: my-xterm
2355: #
2356: # System administrators can change the default entry for xterm instances
2357: # by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either
2358: # case, xterm will detect and reject an invalid terminal type, falling back
2359: # to the default of xterm.
2360: #
2361:
2362: # X10/6.6 11/7/86, minus alternate screen, plus (csr)
2363: # (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string;
2364: # removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E)
2365: # as these seem not to work -- esr)
2366: x10term|vs100-x10|xterm terminal emulator (X10 window system),
2367: OTbs, am, km, mir, msgr, xenl, xon,
2368: cols#80, it#8, lines#65,
2369: bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
2370: cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
2371: cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2372: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
2373: il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H,
2374: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
2375: kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l,
2376: rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
2377: sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=,
2378: smso=\E[7m, smul=\E[4m,
2379: # Compatible with the R5 xterm
2380: # (from the XFree86 3.2 distribution, <blink=@> removed)
1.11 millert 2381: # added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD
2382: # corrected typos in rs2 string - TD
2383: # added u6-u9 -TD
1.1 millert 2384: xterm-r5|xterm R5 version,
2385: OTbs, am, km, msgr, xenl,
2386: cols#80, it#8, lines#24,
2387: bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2388: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2389: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2390: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2391: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2392: el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2393: il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD,
2394: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~,
1.11 millert 2395: kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~,
2396: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
2397: kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2398: kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~,
2399: kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8,
2400: rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
2401: rmul=\E[m,
2402: rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H,
2403: sc=\E7,
1.1 millert 2404: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
1.11 millert 2405: sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
2406: smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
2407: u8=\E[?1;2c, u9=\E[c,
1.1 millert 2408: # Compatible with the R6 xterm
2409: # (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed)
1.11 millert 2410: # added khome/kend, hts based on the R6 xterm code - TD
1.19 millert 2411: # (khome/kend do not actually work in X11R5 or X11R6, but many people use this
2412: # for compatibility with other emulators).
1.1 millert 2413: xterm-r6|xterm-old|xterm X11R6 version,
2414: OTbs, am, km, mir, msgr, xenl,
2415: cols#80, it#8, lines#24,
1.11 millert 2416: acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.1 millert 2417: bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2418: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2419: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2420: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2421: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
1.11 millert 2422: el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
1.1 millert 2423: il1=\E[L, ind=^J,
2424: is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, kbs=^H,
2425: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
1.16 millert 2426: kdch1=\E[3~, kend=\EOF, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
1.8 millert 2427: kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
2428: kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
1.11 millert 2429: kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
2430: kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
1.16 millert 2431: kfnd=\E[1~, khome=\EOH, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
1.11 millert 2432: kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM,
2433: rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
2434: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1.9 millert 2435: rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7,
1.1 millert 2436: sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h,
2437: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1.11 millert 2438: u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
1.1 millert 2439: # This is the base xterm entry for the xterm supplied with XFree86 3.2 & up.
2440: # The name has been changed and some aliases have been removed.
2441: xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System),
2442: OTbs, am, bce, km, mir, msgr, xenl,
1.20 ! millert 2443: cols#80, it#8, lines#24, ncv@,
1.11 millert 2444: acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.1 millert 2445: bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2446: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2447: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2448: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2449: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.14 millert 2450: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
2451: ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2452: flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG,
2453: ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
2454: il1=\E[L, ind=^J,
1.1 millert 2455: is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>,
2456: ka1=\EOw, ka3=\EOu, kb2=\EOy, kbeg=\EOE, kbs=^H, kc1=\EOq,
2457: kc3=\EOs, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2458: kdch1=\177, kend=\EOF, kent=\EOM, kf1=\E[11~, kf10=\E[21~,
2459: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2460: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2461: kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
2462: kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2463: kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~,
2464: kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El,
1.20 ! millert 2465: memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l,
! 2466: rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>,
! 2467: rmso=\E[27m, rmul=\E[24m, rs1=^O,
1.1 millert 2468: rs2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, sc=\E7,
2469: setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2470: setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2471: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2472: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h,
2473: smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
1.11 millert 2474: tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c,
2475: vpa=\E[%i%p1%dd,
1.20 ! millert 2476: use=ecma+color,
1.1 millert 2477:
2478: # This is the stock xterm entry supplied with XFree86 3.3, which uses VT100
2479: # codes for F1-F4 except while in VT220 mode.
2480: xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System),
2481: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
2482: use=xterm-xf86-v32,
2483:
1.11 millert 2484: # This version was released in XFree86 3.3.3 (November 1998).
1.1 millert 2485: # Besides providing printer support, it exploits a new feature that allows
2486: # xterm to use terminfo-based descriptions with the titeInhibit resource.
1.14 millert 2487: # -- the distribution contained incorrect khome/kend values -TD
1.11 millert 2488: xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System),
1.1 millert 2489: mc5i,
1.11 millert 2490: blink=\E[5m, ich1@, invis=\E[8m,
1.14 millert 2491: is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@,
2492: mc0=\E[i, mc4=\E[4i, mc5=\E[5i, rmcup=\E[?1047l\E[?1048l,
2493: rs1=\Ec, rs2=\E[!p\E[?3;4l\E[4l\E>,
1.11 millert 2494: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
2495: smcup=\E[?1048h\E[?1047h,
1.1 millert 2496: use=xterm-xf86-v33,
2497:
1.11 millert 2498: # This beta version will probably be released in XFree86 4.0.
2499: xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System),
1.14 millert 2500: npc,
1.11 millert 2501: kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~,
2502: kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@,
1.13 millert 2503: ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF,
2504: kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S,
2505: kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~,
2506: kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~,
2507: kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q,
2508: kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~,
2509: kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~,
2510: kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P,
2511: kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~,
2512: kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~,
2513: kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~,
2514: kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l,
1.14 millert 2515: sgr=\E[0%?%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
1.13 millert 2516: smcup=\E[?1049h,
1.11 millert 2517: use=xterm-xf86-v333,
2518:
2519: xterm-xfree86|xterm-new|xterm terminal emulator (XFree86 4.0 Window System),
2520: use=xterm-xf86-v40,
2521:
1.1 millert 2522: # From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997
1.11 millert 2523: xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1,
2524: rmso=\E[m, rmul=\E[m,
1.1 millert 2525: use=xterm-xf86-v33,
2526:
1.11 millert 2527: # This is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey)
1.1 millert 2528: xterm-16color|xterm with 16 colors like aixterm,
2529: colors#16, ncv#32, pairs#256,
1.11 millert 2530: setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm,
2531: setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm,
1.1 millert 2532: setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
2533: setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m,
2534: use=xterm-xf86-v40,
2535:
1.11 millert 2536: # These variants of XFree86 3.9.16 xterm are built as a configure option.
2537: xterm-256color|xterm with 256 colors,
2538: ccc,
2539: colors#256, ncv#32, pairs#256,
2540: initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\,
2541: setab=\E[48;5;%p1%dm, setaf=\E[38;5;%p1%dm,
2542: setb=\E[48;5;%p1%dm, setf=\E[38;5;%p1%dm,
2543: use=xterm-xfree86,
2544: xterm-88color|xterm with 88 colors,
2545: colors#88, pairs#88, use=xterm-256color,
2546:
1.1 millert 2547: # This is another variant, for XFree86 4.0 xterm (T.Dickey)
2548: # This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color.
2549: # To use it, your decTerminalID resource must be set to 200 or above.
2550: #
2551: # HTS \E H \210
2552: # RI \E M \215
2553: # SS3 \E O \217
2554: # CSI \E [ \233
2555: #
2556: xterm-8bit|xterm terminal emulator 8-bit controls (X Window System),
1.14 millert 2557: OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl,
1.1 millert 2558: colors#8, cols#80, it#8, lines#24, pairs#64,
1.11 millert 2559: acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2560: bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z,
2561: civis=\233?25l, clear=\233H\2332J, cnorm=\233?25h, cr=^M,
1.1 millert 2562: csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H,
2563: cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C,
2564: cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A,
1.14 millert 2565: dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M,
2566: ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
2567: enacs=\E(B\E)0, flash=\233?5h$<100/>\233?5l,
2568: home=\233H, hpa=\233%i%p1%dG, ht=^I, hts=\210,
2569: ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, ind=^J,
2570: invis=\2338m,
1.1 millert 2571: is2=\E7\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
2572: ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kbs=^H,
2573: kc1=\217q, kc3=\217s, kcub1=\217D, kcud1=\217B,
1.11 millert 2574: kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~,
1.1 millert 2575: kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~,
2576: kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
2577: kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
2578: kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~,
2579: kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~,
1.11 millert 2580: kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M,
2581: knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i,
2582: meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m,
2583: ri=\215, rmacs=^O, rmam=\233?7l, rmcup=\233?1049l,
2584: rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
2585: rs1=\Ec,
1.1 millert 2586: rs2=\E7\E[62"p\E G\233r\233m\233?7h\233?1;3;4;6l\2334l\E8\E>,
2587: sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm,
2588: setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2589: setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
1.11 millert 2590: sgr=\2330%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
2591: sgr0=\233m^O, smacs=^N, smam=\233?7h, smcup=\233?1049h,
1.1 millert 2592: smir=\2334h, smkx=\233?1h\E=, smso=\2337m, smul=\2334m,
1.11 millert 2593: tbc=\2333g, u6=\233[%i%d;%dR, u7=\E[6n, u8=\233[?1;2c,
2594: u9=\E[c, vpa=\233%i%p1%dd,
2595:
2596: xterm-hp|XFree86 xterm with hpterm function keys,
2597: kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
2598: kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es,
2599: kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ,
2600: knp=\ES, kpp=\ET,
2601: use=xterm-xfree86,
2602:
2603: xterm-vt220|XFree86 xterm emulating vt220,
2604: ka1=\EOw, ka3=\EOy, kbeg=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs,
2605: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
2606: kdch1=\E[3~, kend=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
2607: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2608: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2609: kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
2610: kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2611: khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
2612: use=xterm-xfree86,
2613:
2614: xterm-vt52|XFree86 xterm emulating dec vt52,
2615: cols#80, it#8, lines#24,
2616: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2617: bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
2618: cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK,
2619: home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
2620: kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF,
2621:
2622: xterm-noapp|xterm with cursor keys in normal mode,
2623: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rmcup@,
2624: rmkx=\E>, smcup@, smkx=\E=,
2625: use=xterm,
2626:
2627: xterm-24|vs100|xterms|xterm terminal emulator (X Window System),
2628: lines#24, use=xterm-r6,
1.1 millert 2629:
1.11 millert 2630: # This is xterm for ncurses.
2631: xterm|xterm terminal emulator (X Window System),
1.1 millert 2632: use=xterm-r6,
1.11 millert 2633: # use=xterm-xfree86,
1.1 millert 2634:
2635: # These entries allow access to the X titlebar and icon name as a status line.
2636: # Note that twm (and possibly window managers descended from it such as tvtwm,
2637: # ctwm, and vtwm) track windows by icon-name; thus, you don't want to mess
2638: # with it.
2639: xterm+sl|access X title line and icon name,
2640: hs,
2641: wsl#40,
1.11 millert 2642: dsl=\E]0;\007, fsl=^G, tsl=\E]0;, use=xterm,
1.1 millert 2643: xterm+sl-twm|access X title line (pacify twm-descended window managers),
2644: hs,
2645: wsl#40,
1.11 millert 2646: dsl=\E]2;\007, fsl=^G, tsl=\E]2;, use=xterm,
1.1 millert 2647:
2648: #
2649: # The following xterm variants don't depend on your base version
2650: #
1.11 millert 2651: # xterm with bold instead of underline
1.1 millert 2652: xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold,
1.11 millert 2653: smso=\E[7m, smul=\E[1m,
1.1 millert 2654: use=xterm,
2655: # (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr)
2656: # (kterm should not invoke DEC Graphics as the alternate character set
2657: # -- Kenji Rikitake)
2658: kterm|kterm kanji terminal emulator (X window system),
2659: eslok, hs,
2660: acsc@, csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs@, fsl=\E[?F,
1.20 ! millert 2661: kmous=\E[M, rc=\E8, rmacs@, sc=\E7, smacs@,
! 2662: tsl=\E[?E\E[?%i%dT, use=xterm-r6,
! 2663: use=ecma+color,
1.1 millert 2664: # See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file
2665: xterm-nic|xterm with ich/ich1 suppressed for non-curses programs,
2666: ich@, ich1@,
2667: use=xterm,
2668: # From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996
2669: xterm1|xterm terminal emulator ignoring the alternate screen buffer,
2670: rmcup@, smcup@,
2671: use=xterm,
2672:
2673: # This describes the capabilities of color_xterm, an xterm variant from
2674: # before ECMA-64 color support was folded into the main-line xterm release.
2675: # This entry is straight from color_xterm's maintainer.
2676: # From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996
2677: # The README's with the distribution also say that it supports SGR 21, 24, 25
2678: # and 27, but they are not present in the terminfo or termcap.
2679: color_xterm|cx|cx100|color_xterm color terminal emulator for X,
2680: OTbs, am, km, mir, msgr, xenl,
1.20 ! millert 2681: cols#80, it#8, lines#65, ncv@,
1.1 millert 2682: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2683: bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2684: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2685: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2686: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2687: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2688: el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I,
2689: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
2690: is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, ka1=\EOw, ka3=\EOy,
2691: kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\EOD, kcud1=\EOB,
2692: kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kent=\EOM, kf1=\E[11~,
2693: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~,
2694: kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~,
2695: kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~,
1.20 ! millert 2696: kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM,
! 2697: rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l,
! 2698: rmso=\E[27m, rmul=\E[24m,
1.1 millert 2699: rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<,
1.20 ! millert 2700: sc=\E7,
1.1 millert 2701: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2702: sgr0=\E[m, smacs=^N, smam=\E[?7h,
2703: smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m,
2704: smul=\E[4m,
1.20 ! millert 2705: use=ecma+color,
1.1 millert 2706:
1.11 millert 2707: # The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of
1.1 millert 2708: # xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support
2709: # SGR 39 or 49. SGR 0 does reset colors (along with everything else). This
2710: # description is "compatible" with color_xterm, rxvt and XFree86 xterm, except
2711: # that each of those implements the home, end, delete keys differently.
1.11 millert 2712: #
2713: # Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce
2714: # colors; note that this is not compatible with the 5.2 version.
2715: nxterm|xterm-color|generic color xterm,
2716: ncv@,
2717: op=\E[m, use=xterm-r6, use=klone+color,
2718:
2719: # this describes the alpha-version of Gnome terminal shipped with Redhat 6.0
2720: gnome|Gnome terminal,
2721: bce,
2722: kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-color,
2723:
2724: # This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce
2725: # or not is debatable).
2726: kvt|KDE terminal,
2727: bce, km@,
2728: kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color,
1.1 millert 2729:
2730: # From: Thomas Dickey <dickey@clark.net> 04 Oct 1997
2731: # Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997
2732: # Notes:
2733: # rxvt 2.21b uses
2734: # smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O,
2735: # but some applications don't work with that.
2736: # It also has an AIX extension
2737: # box2=lqkxjmwuvtn,
2738: # and
2739: # ech=\E[%p1%dX,
2740: # but the latter does not work correctly.
2741: #
1.11 millert 2742: # The distributed terminfo says it implements hpa and vpa, but they are not
2743: # implemented correctly, using relative rather than absolute positioning.
2744: #
1.1 millert 2745: # rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM.
2746: # Since rxvt is not really compatible with xterm, it should be configured as
2747: # "rxvt" (monochrome) and "rxvt-color".
2748: rxvt-basic|rxvt terminal base (X Window System),
1.19 millert 2749: OTbs, am, bce, eo, km, mir, msgr, xenl, xon,
1.1 millert 2750: cols#80, it#8, lines#24,
2751: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2752: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
2753: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
2754: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2755: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2756: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.14 millert 2757: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2758: el=\E[K, el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l,
2759: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2760: il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E[?47l\E=\E[?1l,
1.1 millert 2761: is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l,
2762: kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kLFT=\E[d, kNXT=\E[6$,
2763: kPRV=\E[5$, kRIT=\E[c, ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H,
2764: kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B,
2765: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^,
1.13 millert 2766: kend=\E[8~, kent=\EOM, kf1=\E[11~, kf10=\E[21~,
1.1 millert 2767: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
2768: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
2769: kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~,
2770: kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
2771: kf9=\E[20~, kfnd=\E[1~, khome=\E[7~, kich1=\E[2~,
2772: kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8,
1.11 millert 2773: rev=\E[7m, ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8,
2774: rmir=\E[4l, rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
1.1 millert 2775: rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
2776: rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>,
2777: s0ds=\E(B, s1ds=\E(0, sc=\E7, sgr0=\E[0m\017, smacs=^N,
2778: smcup=\E7\E[?47h, smir=\E[4h, smkx=\E=, smso=\E[7m,
2779: smul=\E[4m, tbc=\E[3g,
2780: rxvt|rxvt terminal emulator (X Window System),
1.20 ! millert 2781: ncv@,
! 2782: sgr0=\E[m\017, use=rxvt-basic, use=ecma+color,
1.1 millert 2783:
1.11 millert 2784: # These (xtermc and xtermm) are distributed with Solaris. They refer to a
2785: # variant of xterm which is apparently no longer supported, but are interesting
2786: # because they illustrate SVr4 curses mouse controls - T.Dickey
2787: xtermm|xterm terminal emulator (monocrome),
1.19 millert 2788: OTbs, am, km, mir, msgr, xenl,
1.11 millert 2789: btns#3, cols#80, it#8, lines#24,
2790: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2791: bel=^G, blink=@, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
2792: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D,
2793: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2794: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2795: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2796: el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY,
2797: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@,
2798: il=\E[%p1%dL, il1=\E[L, ind=^J, ka1=\EOq, ka3=\EOs, kb2=\EOr,
2799: kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB,
2800: kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kent=\EOM, kf0=\EOy,
2801: kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ,
2802: kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
2803: kf9=\EOX, khome=\E[H, kmous=\E[^_, knp=\E[U, kpp=\E[V,
2804: rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, rmacs=^O,
2805: rmcup=\E@0\E[?4r, rmso=\E[m,
2806: rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H,
2807: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
2808: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
2809: sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1,
2810: smso=\E[7m, tbc=\E[3g,
2811:
2812: xtermc|xterm terminal emulator (color),
2813: colors#8, ncv#7, pairs#64,
2814: op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm,
2815: setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2816: setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m,
2817: use=xtermm,
2818:
1.1 millert 2819: # From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995
2820: # Here's a termcap entry I've been using for xterm_color, which comes
2821: # with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the
2822: # color stuff, I also have a status line defined as the window manager
2823: # title bar. [I have translated it to terminfo -- ESR]
2824: xterm-pcolor|xterm with color used for highlights and status line,
2825: bold=\E[1m\E[43m, rev=\E[7m\E[34m, smso=\E[7m\E[31m,
2826: smul=\E[4m\E[42m,
2827: use=xterm+sl, use=xterm-r6,
2828:
2829: # HP ships this, except for the pb#9600 which was merged in from BSD termcap.
2830: # (hpterm: added empty <acsc>, we have no idea what ACS chars look like --esr)
2831: hpterm|X-hpterm|hp X11 terminal emulator,
2832: am, da, db, mir, xhp,
2833: cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0,
2834: acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M,
2835: cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC,
2836: cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK,
2837: hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H,
2838: kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
2839: kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
2840: kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
2841: khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
2842: knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El,
2843: memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
2844: pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
2845: pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
2846: pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET,
2847: rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@,
2848: rmul=\E&d@,
1.11 millert 2849: sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
1.1 millert 2850: sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
2851: smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
2852:
2853: # This entry describes an xterm with Sun-style function keys enabled
2854: # via the X resource setting "xterm*sunFunctionKeys:true"
2855: # To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same.
2856: # The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z>
2857: # because we want it to be seen as <kcpy>.
2858: # The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance
2859: # with their Sun keyboard labels instead.
2860: # From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996
2861: xterm-sun|xterm with sunFunctionKeys true,
2862: kb2=\E[218z, kcpy=\E[197z, kend=\E[220z, kf1=\E[224z,
2863: kf10=\E[233z, kf11=\E[192z, kf12=\E[193z, kf13=\E[194z,
2864: kf14=\E[195z, kf15=\E[196z, kf17=\E[198z, kf18=\E[199z,
2865: kf19=\E[200z, kf2=\E[225z, kf20=\E[201z, kf3=\E[226z,
2866: kf31=\E[208z, kf32=\E[209z, kf33=\E[210z, kf34=\E[211z,
2867: kf35=\E[212z, kf36=\E[213z, kf38=\E[215z, kf4=\E[227z,
2868: kf40=\E[217z, kf42=\E[219z, kf44=\E[221z, kf5=\E[228z,
2869: kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
2870: kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, kich1=\E[2z,
2871: knp=\E[222z, kpp=\E[216z, kund=\E[195z,
2872: use=xterm,
2873: xterms-sun|small (80x24) xterm with sunFunctionKeys true,
2874: cols#80, lines#24, use=xterm-sun,
2875:
2876: # This is for the extensible terminal emulator on the X11R6 contrib tape.
2877: emu|emu native mode,
2878: mir, msgr, xon,
2879: colors#15, cols#80, it#8, lines#24, pairs#64, vt#200,
2880: acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244,
2881: bel=^G, blink=\ES\EW, bold=\ES\EU, civis=\EZ,
2882: clear=\EP\EE0;0;, cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;,
2883: cub=\Eq-%p1%d;, cub1=^H, cud=\Ep%p1%d;, cud1=\EB,
2884: cuf=\Eq%p1%d;, cuf1=\ED, cup=\EE%p1%d;%p2%d;,
1.14 millert 2885: cuu=\Ep-%p1%d;, cuu1=\EA, dch=\EI%p1%d;, dch1=\EI1;,
2886: dl=\ER%p1%d;, dl1=\ER1;, ech=\Ej%p1%d;, ed=\EN, el=\EK,
2887: el1=\EL, enacs=\0, home=\EE0;0;, ht=^I, hts=\Eh,
1.1 millert 2888: il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, is2=\ES\Er0;\Es0;,
2889: kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, kcuu1=\EA,
2890: kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, kf10=\EF10,
2891: kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, kf15=\EF15,
2892: kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, kf2=\EF02,
2893: kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, kf6=\EF06,
2894: kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, kich1=\Eins,
2895: knp=\Enext, kpp=\Eprior, kslt=\Esel, oc=\Es0;\Er0;,
2896: rev=\ES\ET, ri=\EF, rmacs=\0, rmir=\EX, rmso=\ES, rmul=\ES,
1.11 millert 2897: rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;,
2898: setaf=\Er%i%p1%d;, sgr0=\ES, smacs=\0, smir=\EY,
2899: smso=\ES\ET, smul=\ES\EV, tbc=\Ej,
1.1 millert 2900:
1.11 millert 2901: #### MGR
2902: #
2903: # MGR is a Bell Labs window system lighter-weight than X.
2904: # These entries describe MGR's xterm-equivalent.
2905: # They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997
1.1 millert 2906: #
2907:
1.11 millert 2908: mgr|Bellcore MGR (non X) window system terminal emulation,
2909: am, km,
2910: bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M,
2911: csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er,
2912: cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h,
2913: dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>,
2914: dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u,
2915: ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>,
2916: il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B,
2917: kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S,
2918: rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n,
2919: smul=\E4n,
2920: mgr-sun|Mgr window with Sun keyboard,
2921: ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z,
2922: kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z,
2923: kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z,
2924: kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z,
2925: kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z,
2926: kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z,
2927: kopn=\E[198z, kpp=\E[216z, kund=\E[195z,
2928: use=mgr,
2929: mgr-linux|Mgr window with Linux keyboard,
2930: ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~,
2931: kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~,
2932: kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D,
2933: kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
2934: khome=\E[1~, knp=\E[6~, kpp=\E[5~,
2935: use=mgr,
2936:
2937: ######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS
1.1 millert 2938: #
2939:
1.11 millert 2940: # Columbus UNIX virtual terminal. This terminal also appears in
2941: # UNIX 4.0 and successors as line discipline 1 (?), but is
2942: # undocumented and does not really work quite right.
2943: cbunix|cb unix virtual terminal,
2944: OTbs, am, da, db,
2945: cols#80, lines#24, lm#0,
2946: bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
2947: cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL,
2948: el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB,
2949: kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A,
2950: smso=\Ea^D, smul=\Ea^A,
2951: # (vremote: removed obsolete ":nl@:" -- esr)
2952: vremote|virtual remote terminal,
2953: am@,
2954: cols#79, use=cbunix,
2955:
2956: pty|4bsd pseudo teletype,
2957: cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!,
2958: smso=\Ea$, smul=\Ea!,
2959: use=cbunix,
2960:
2961: # The codes supported by the term.el terminal emulation in GNU Emacs 19.30
2962: eterm|gnu emacs term.el terminal emulation,
2963: am, mir, xenl,
2964: cols#80, lines#24,
2965: bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M,
2966: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2967: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2968: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
2969: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
2970: el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
2971: il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m,
2972: rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
2973: sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m,
2974: smul=\E[4m,
1.1 millert 2975:
1.14 millert 2976: # Entries for use by the `screen' program by Juergen Weigert,
2977: # Michael Schroeder, Oliver Laumann. The screen and
1.11 millert 2978: # screen-w entries came with version 3.7.1. The screen2 and screen3 entries
2979: # come from University of Wisconsin and may be older.
2980: # (screen: added <cnorm> on ANSI model -- esr)
1.1 millert 2981: #
1.11 millert 2982: # 'screen' defines extensions to termcap. Some are used in its terminal
2983: # description:
2984: # G0 (bool) Terminal can deal with ISO 2022 font selection sequences.
2985: # AX (bool) Does understand ANSI set default fg/bg color
2986: # (\E[39m / \E[49m).
2987: screen|VT 100/ANSI X3.64 virtual terminal,
1.20 ! millert 2988: OTbs, OTpt, am, km, mir, msgr, xenl, G0,
1.11 millert 2989: colors#8, cols#80, it#8, lines#24, pairs#64,
2990: acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
2991: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
2992: clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M,
2993: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
2994: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
2995: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
2996: cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
2997: dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
2998: flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
2999: il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
3000: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\EOP,
3001: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR,
3002: kf4=\EOS, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~,
3003: kf9=\E[20~, khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~,
3004: kpp=\E[5~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
3005: rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, rmul=\E[24m,
3006: rs2=\Ec, sc=\E7, sgr0=\E[m, smacs=^N, smir=\E[4h,
3007: smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g,
3008: use=ecma+color,
3009:
3010: screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols,
3011: cols#132, use=screen,
1.1 millert 3012:
1.11 millert 3013: screen2|old VT 100/ANSI X3.64 virtual terminal,
3014: cols#80, it#8, lines#24,
3015: cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H,
1.1 millert 3016: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
3017: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.11 millert 3018: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3019: el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL,
3020: il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
3021: kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
3022: kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
3023: nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m,
3024: rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h,
3025: smso=\E[3m, smul=\E[4m, tbc=\E[3g,
3026: # (screen3: removed unknown ":xv:LP:G0:" -- esr)
3027: screen3|older VT 100/ANSI X3.64 virtual terminal,
3028: km, mir, msgr,
3029: cols#80, it#8, lines#24,
3030: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
3031: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3032: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3033: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
3034: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
3035: el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
3036: il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD,
3037: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
3038: kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
3039: rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec,
3040: sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m,
3041: smul=\E[4m, tbc=\E[3g,
1.1 millert 3042:
1.11 millert 3043: # Francesco Potorti <F.Potorti@cnuce.cnr.it>:
3044: # NCSA telnet is one of the most used telnet clients for the Macintosh. It has
3045: # been maintained until recently by the National Center for Supercomputer
3046: # Applications, and it is feature rich, stable and free. It can be downloaded
3047: # from www.ncsa.edu. This terminfo description file is based on xterm-vt220,
3048: # xterm+sl, and the docs at NCSA. It works well.
3049: #
3050: # NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode
3051: # The terminal options should be set as follows:
3052: # Xterm sequences ON
3053: # use VT wrap mode ON
3054: # use Emacs arrow keys OFF
3055: # CTRL-COMND is Emacs meta ON
3056: # 8 bit mode ON
3057: # answerback string: "ncsa-vt220-8"
3058: # setup keys: all disabled
3059: #
3060: # Application mode is not used.
1.1 millert 3061: #
1.11 millert 3062: # Other special mappings:
3063: # Apple VT220
3064: # HELP Find
3065: # HOME Insert here
3066: # PAGEUP Remove
3067: # DEL Select
3068: # END Prev Screen
3069: # PAGEDOWN Next Screen
3070: #
3071: # Though it supports ANSI color, NCSA Telnet uses color to represent blinking
3072: # text.
3073: #
3074: # The status-line manipulation is a mapping of the xterm-compatible control
3075: # sequences for setting the window-title. So you must use tsl and fsl in
3076: # pairs, since the latter ends the string that is loaded to the window-title.
3077: ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
3078: am, hs, km, mir, msgr, xenl,
3079: acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3080: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3081: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
3082: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3083: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3084: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3085: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
3086: dsl=\E]0;\007, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0,
3087: flash=\E[?5h\E[?5l, fsl=^G, home=\E[H, ht=^I, hts=\EH,
3088: ich=\E[%p1%d@, if=/usr/share/tabset/vt100,
3089: il=\E[%p1%dL, il1=\E[L, ind=\n$<150*>,
3090: is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H,
3091: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3092: kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~,
3093: kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~,
3094: kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~,
3095: kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~,
3096: khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i,
3097: rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM,
3098: rmacs=^O, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l,
3099: rmso=\E[27m, rmul=\E[24m,
3100: rs2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, sc=\E7,
3101: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;,
3102: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7,
3103: smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, tsl=\E]0;,
3104: u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?62;1;6c, u9=\E[c,
3105: ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
3106: use=ncsa-m, use=klone+color,
3107: ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode,
3108: hs@,
3109: dsl@, fsl@, tsl@, use=ncsa,
3110: ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode,
3111: hs@,
3112: dsl@, fsl@, tsl@, use=ncsa-m,
3113: # alternate -TD:
3114: # The documented function-key mapping refers to the Apple Extended Keyboard
3115: # (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style
3116: # codes, however, since the numeric keypad (VT100) PF1-PF4 are available on
3117: # some keyboards and many applications require these as F1-F4.
3118: #
3119: ncsa-vt220|NCSA Telnet using vt220-compatible function keys,
3120: kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
3121: kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
3122: kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
3123: kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
3124: kf8=\E[19~, kf9=\E[20~,
3125: use=ncsa,
3126:
3127: #### Pilot Pro Palm-Top
1.1 millert 3128: #
1.11 millert 3129: # From: Jason Downs <downsj@downsj.com>, 15 Jun 1997 (Top Gun Telnet's author)
3130: pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional,
3131: am, xenl,
3132: cols#39, lines#16,
3133: bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J,
3134: cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I,
3135: ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s,
3136: rmso=\EB, smso=\Eb,
3137:
3138: ######## COMMERCIAL WORKSTATION CONSOLES
1.1 millert 3139: #
1.11 millert 3140:
3141: #### Alpha consoles
1.1 millert 3142: #
1.11 millert 3143:
3144: # This is from the OSF/1 Release 1.0 termcap file
3145: pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation,
1.1 millert 3146: am, xon,
1.11 millert 3147: cols#80, lines#25,
3148: bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3149: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
3150: el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H,
3151: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
3152: nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m,
1.1 millert 3153:
1.11 millert 3154: #### Sun consoles
1.1 millert 3155: #
3156:
1.11 millert 3157: # :is1: resets scrolling region in case a previous user had used "tset vt100"
3158: oldsun|Sun Microsystems Workstation console,
3159: OTbs, am, km, mir, msgr,
3160: cols#80, it#8, lines#34,
3161: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
3162: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
3163: dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
3164: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3165: is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3166: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
3167: rmso=\E[m, sgr0=\E[m, smso=\E[7m,
3168: # From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995
3169: # <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com>
3170: # SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998)
3171: sun-il|Sun Microsystems console with working insert-line,
3172: am, km, msgr,
3173: cols#80, lines#34,
3174: bel=^G, bold@, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3175: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
3176: dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I,
3177: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
3178: kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3179: kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z,
3180: kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z,
3181: kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z,
3182: kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z,
3183: knp=\E[222z, kopt=\E[194z, kpp=\E[216z, kres=\E[193z,
3184: kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, rs2=\E[s,
3185: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m,
3186: sgr0=\E[m, smso=\E[7m, smul@, u8=\E[1t, u9=\E[11t,
3187: # On a SparcStation 5, <il1>/<il> flake out on the last line.
3188: # Unfortunately, without them the terminal has no way to scroll.
3189: sun-ss5|Sun SparcStation 5 console,
3190: il@, il1@, use=sun-il,
3191: # If you are using an SS5, change the sun definition to use sun-ss5.
3192: sun|sun1|sun2|Sun Microsystems Inc. workstation console,
3193: use=sun-il,
1.1 millert 3194:
1.11 millert 3195: # From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985
3196: sun-s|Sun Microsystems Workstation window with status line,
3197: hs,
3198: dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun,
3199: sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs,
3200: hs,
3201: dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e,
3202: sun-48|Sun 48-line window,
3203: cols#80, lines#48, use=sun,
3204: sun-34|Sun 34-line window,
3205: cols#80, lines#34, use=sun,
3206: sun-24|Sun 24-line window,
3207: cols#80, lines#24, use=sun,
3208: sun-17|Sun 17-line window,
3209: cols#80, lines#17, use=sun,
3210: sun-12|Sun 12-line window,
3211: cols#80, lines#12, use=sun,
3212: sun-1|Sun 1-line window for sysline,
3213: eslok, hs,
3214: cols#80, lines#1,
3215: dsl=^L, fsl=\E[K, tsl=^M, use=sun,
3216: sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character,
3217: ich1@, rmir@, smir@,
3218: use=sun,
3219: sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history,
3220: lines#35,
3221: rmcup=\E[>4h, smcup=\E[>4l, use=sun,
1.1 millert 3222:
3223: #### Iris consoles
3224: #
3225:
3226: # (wsiris: this had extension capabilities
3227: # :HS=\E7F2:HE=\E7F7:\
3228: # :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite:
3229: # See the note on Iris extensions near the end of this file.
3230: # Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> &
3231: # <flash> from BRL -- esr)
3232: wsiris|iris40|iris emulating a 40 line visual 50 (approximately),
3233: OTbs, OTnc, OTpt, am,
3234: OTkn#3, cols#80, it#8, lines#40,
1.11 millert 3235: OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB,
3236: cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
3237: cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK,
3238: flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL,
3239: ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB,
3240: kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3,
3241: kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI,
3242: rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P,
3243: smul=\E7R2\E9P,
1.1 millert 3244:
3245: #### NeWS consoles
3246: #
3247: # Console terminal windows under the NeWS (Sun's Display Postscript windowing
3248: # environment). Note: these have nothing to do with Sony's News workstation
3249: # line.
3250: #
3251:
3252: # Entry for NeWS's psterm from Eric Messick & Hugh Daniel
3253: # (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr)
3254: psterm|psterm-basic|NeWS psterm-80x34,
3255: OTbs, am, hs, km, ul,
3256: cols#80, it#8, lines#34,
1.11 millert 3257: blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;,
3258: cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY,
3259: dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl,
3260: home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D,
3261: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr,
3262: ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^],
3263: sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu,
3264: tsl=\EOl,
1.1 millert 3265: psterm-96x48|NeWS psterm 96x48,
1.11 millert 3266: cols#96, lines#48, use=psterm,
1.1 millert 3267: psterm-90x28|NeWS psterm 90x28,
1.11 millert 3268: cols#90, lines#28, use=psterm,
1.1 millert 3269: psterm-80x24|NeWS psterm 80x24,
1.11 millert 3270: cols#80, lines#24, use=psterm,
1.1 millert 3271: # This is a faster termcap for psterm. Warning: if you use this termcap,
3272: # some control characters you type will do strange things to the screen.
3273: # (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr)
3274: psterm-fast|NeWS psterm fast version (flaky ctrl chars),
3275: OTbs, am, hs, km, ul,
3276: cols#80, it#8, lines#34,
1.11 millert 3277: blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;,
3278: cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y,
3279: dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I,
3280: il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
3281: kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni,
3282: rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi,
3283: smso=^Oo, smul=^Ou, tsl=^Ol,
1.1 millert 3284:
3285: #### NeXT consoles
3286: #
3287: # Use `glasstty' for the Workspace application
3288: #
3289:
3290: # From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995
3291: next|NeXT console,
3292: am, xt,
3293: cols#80, it#8, lines#24,
1.11 millert 3294: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3295: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
3296: ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
3297: rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m,
1.1 millert 3298: nextshell|NeXT Shell application,
3299: am,
3300: cols#80,
1.11 millert 3301: bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H,
3302: kcud1=^J, nel=^M^J,
1.1 millert 3303:
1.11 millert 3304: #### Sony NEWS workstations
1.1 millert 3305: #
3306:
1.11 millert 3307: # (news-unk: this had :KB=news: -- esr)
3308: news-unk|SONY NEWS vt100 emulator common entry,
3309: OTbs, OTpt, am, xenl,
3310: cols#80,
3311: OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
3312: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
3313: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
3314: ed=\E[J, el=\E[K, home=\E[H, ht=^I,
3315: if=/usr/lib/tabset/vt100, il=\E[%p1%dL, il1=\E[L,
3316: is2=\E[?7h\E[?1l\E[?3l\E7\E8, kbs=^H, kcub1=\EOD,
3317: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP,
3318: kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV,
3319: kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM,
3320: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3321: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7,
3322: sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3323: #
3324: # (news-29: this had :TY=ascii: --esr)
3325: news-29,
3326: lines#29, use=news-unk,
3327: # (news-29-euc: this had :TY=euc: --esr)
3328: news-29-euc,
3329: use=news-29,
3330: # (news-29-sjis: this had :TY=sjis: --esr)
3331: news-29-sjis,
3332: use=news-29,
3333: #
3334: # (news-33: this had :TY=ascii: --esr)
3335: news-33,
3336: lines#33, use=news-unk,
3337: # (news-33-euc: this had :TY=euc: --esr)
3338: news-33-euc,
3339: use=news-33,
3340: # (news-33-sjis: this had :TY=sjis: --esr)
3341: news-33-sjis,
3342: use=news-33,
3343: #
3344: # (news-42: this had :TY=ascii: --esr)
3345: news-42,
3346: lines#42, use=news-unk,
3347: # (news-42-euc: this had :TY=euc: --esr)
3348: news-42-euc,
3349: use=news-42,
3350: # (news-42-sjis: this had :TY=sjis: --esr)
3351: news-42-sjis,
3352: use=news-42,
3353: #
3354: # NEWS-OS old termcap entry
3355: #
3356: # (news-old-unk: this had :KB=news:TY=sjis: --esr)
3357: news-old-unk|SONY NEWS vt100 emulator common entry,
3358: OTbs, OTpt, am, xenl,
3359: cols#80, vt#3,
3360: OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
3361: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
3362: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
3363: home=\E[H, ht=^I, if=/usr/lib/tabset/vt100, kbs=^H,
3364: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
3365: kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM,
3366: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
3367: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3368: sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
3369: #
3370: # (nwp512: this had :DE=^H:, which I think means <OTbs> --esr)
1.14 millert 3371: nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines,
1.11 millert 3372: OTbs,
3373: lines#40,
3374: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk,
3375: #
3376: # (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr)
3377: nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line,
3378: lines#42,
3379: is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, use=news-old-unk,
3380: #
3381: # (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr)
3382: nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines,
3383: OTbs,
3384: lines#40,
3385: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, use=news-old-unk,
3386: #
3387: # (nwp513: this had :DE=^H: and the alias vt100-bm --esr)
3388: nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines,
3389: OTbs,
3390: lines#31,
3391: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk,
3392: #
3393: # (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr)
3394: # also the alias vt100-bm.
1.14 millert 3395: nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines,
1.11 millert 3396: OTbs,
3397: lines#33,
3398: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, use=news-old-unk,
3399: #
3400: # (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr)
1.14 millert 3401: nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines,
1.19 millert 3402: OTbs,
1.11 millert 3403: lines#31,
3404: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, use=news-old-unk,
3405: #
3406: # (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr)
3407: news28|sony vt100 emulator 28 lines,
3408: OTbs,
3409: lines#28,
3410: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8, use=news-old-unk,
3411: #
3412: # (news29: this had :TY=ascii:KB=nws1200:\ --esr)
3413: news29|news28-a|sony vt100 emulator 29 lines,
3414: lines#29,
3415: is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8, use=news-old-unk,
1.1 millert 3416: #
1.11 millert 3417: # (news511: this had :TY=sjis: --esr)
3418: nwp511|nwp-511|nwp-511 vt100,
3419: OTbs, OTpt, am, xenl,
1.1 millert 3420: cols#80, lines#24,
1.11 millert 3421: clear=\E[;H\E[2J$<20/>, cuf1=\E[C,
3422: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M,
3423: ed=\E[J$<30/>, el=\E[K$<3/>,
3424: flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l,
3425: il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D,
3426: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
3427: kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H,
3428: ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
3429: rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h,
3430: smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3431: # (news517: this had :TY=sjis:. --esr)
3432: nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows,
3433: eslok, hs,
3434: cols#80, lines#30,
3435: OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
3436: is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
3437: tsl=\E[1$}\E[;%df,
3438: use=vt200,
3439: # (news517-w: this had :TY=sjis:. --esr)
3440: nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows,
1.1 millert 3441: eslok, hs,
1.11 millert 3442: cols#132, lines#50,
3443: OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$},
3444: is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
3445: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h,
3446: tsl=\E[1$}\E[;%df, use=vt200,
1.1 millert 3447:
3448: #### Common Desktop Environment
3449: #
3450:
3451: # This ships with Sun's CDE in Solaris 2.5
3452: # Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net>
3453: dtterm|CDE desktop terminal,
3454: am, mir, msgr, xenl, xon,
1.20 ! millert 3455: cols#80, it#8, lines#24, lm#0, ncv@,
1.1 millert 3456: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
3457: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3458: clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
3459: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
3460: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
3461: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
3462: dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
1.11 millert 3463: dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K,
3464: enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H,
3465: ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
3466: ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l,
3467: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
1.1 millert 3468: kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
3469: kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
3470: kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
3471: kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
3472: kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3473: kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
1.20 ! millert 3474: kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O,
! 3475: rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m,
! 3476: sc=\E7,
1.1 millert 3477: sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
1.11 millert 3478: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
1.1 millert 3479: smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
1.20 ! millert 3480: use=ecma+color,
1.1 millert 3481:
1.11 millert 3482: #### Non-Unix Consoles
1.1 millert 3483: #
3484:
1.11 millert 3485: # Except for the "-emx" suffixes, these are as distributed with EMX 0.9b,
3486: # a Unix-style environment used on OS/2. (Note that the suffix makes some
3487: # names longer than 14 characters, the nominal maximum).
1.1 millert 3488: #
1.11 millert 3489: # Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs.
3490: ansi-emx|ANSI.SYS color,
3491: am, bce, eo, mir, msgr, xenl, xon,
3492: colors#16, cols#80, it#8, lines#25, pairs#64,
3493: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3494: clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
3495: cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
3496: dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
3497: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
3498: kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
3499: kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@,
3500: kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O,
3501: knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[5;37;41m,
3502: rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;44m\E[1;33m,
3503: rmul=\E[0;44m\E[1;33m, rs1=\Ec, setab=\E[4%p1%dm,
3504: setaf=\E[3%p1%dm, sgr0=\E[0m\E[1;33;44m, smir=\E[4h,
3505: smpch=\E[11m, smso=\E[0;31;47m, smul=\E[1;31;44m,
3506: tbc=\E[3g, u8=\E[?6c, u9=\E[c,
3507: ansi-color-2-emx|ANSI.SYS color 2,
3508: am, bce, eo, mir, msgr, xenl, xon,
3509: colors#16, cols#80, it#8, lines#25, pairs#64,
3510: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3511: clear=\E[0;37;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
3512: cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
3513: dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
3514: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
3515: kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
3516: kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@,
3517: kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O,
3518: knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[1;37;46m,
3519: rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;37;44m,
3520: rmul=\E[0;37;44m, rs1=\Ec, setab=\E[4%p1%dm,
3521: setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smir=\E[4h,
3522: smpch=\E[11m, smso=\E[1;37;46m, smul=\E[1;36;44m,
3523: tbc=\E[3g, u8=\E[?6c, u9=\E[c,
3524: ansi-color-3-emx|ANSI.SYS color 3,
3525: am, bce, eo, mir, msgr, xenl, xon,
3526: colors#16, cols#80, it#8, lines#25, pairs#64,
3527: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
3528: clear=\E[0;37;40m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H,
3529: cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
3530: dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l,
3531: home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J,
3532: kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H,
3533: kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, kf5=\0?, kf6=\0@,
3534: kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, kich1=\0R, kll=\0O,
3535: knp=\0Q, kpp=\0I, kspd=^Z, nel=^M^J, rev=\E[1;37;46m,
3536: rmir=\E[4l, rmpch=\E[10m, rmso=\E[0;37;40m,
3537: rmul=\E[0;37;40m, rs1=\Ec, setab=\E[4%p1%dm,
3538: setaf=\E[3%p1%dm, sgr0=\E[0;10m, smir=\E[4h,
3539: smpch=\E[11m, smso=\E[1;37;46m, smul=\E[0;36;40m,
3540: tbc=\E[3g, u8=\E[?6c, u9=\E[c,
3541: mono-emx|stupid monochrome ansi terminal with only one kind of emphasis,
3542: am,
1.1 millert 3543: cols#80, it#8, lines#24,
1.11 millert 3544: clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
3545: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
3546: ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M,
3547: kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>,
3548: kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G,
3549: kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m,
3550: sgr0=\E[0m,
1.1 millert 3551:
1.11 millert 3552: # Use this for cygwin32 (tested with beta 19.1)
3553: # underline is colored bright magenta
3554: # shifted kf1-kf12 are kf11-kf22
3555: cygwin|ansi emulation for cygwin32,
3556: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
3557: kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~,
3558: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
3559: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
3560: kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D,
3561: kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
3562: khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@,
3563: use=ansi.sys,
1.1 millert 3564:
1.11 millert 3565: # This entry fits the Windows NT console when the _POSIX_TERM environment
3566: # variable is set to 'on'. While the Windows NT POSIX console is seldom used,
3567: # the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP
3568: # stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating
3569: # systems is not, and (surprise!) they match very well.
1.1 millert 3570: #
1.11 millert 3571: # See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up
3572: # VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only
3573: # are the installation instructions a pile of mind-numbing bureaucratese,
3574: # but the termcap entry is actually broken and unusable as given; the :do:
3575: # capability is misspelled "d".
1.1 millert 3576: #
3577: # To use this, you need to a bunch of environment variables:
3578: #
3579: # SET _POSIX_TERM=on
3580: # SET TERM=ansi
3581: # SET TERMCAP=location of termcap file in POSIX file format
3582: # which is case-sensitive.
3583: # e.g. SET TERMCAP=//D/RESKIT35/posix/termcap
3584: # SET TMP=//C/TEMP
3585: #
3586: # Important note: setting the TMP environment variable in POSIX style renders
3587: # it incompatible with a lot of other applications, including Visual C++. So
3588: # you should have a separate command window just for vi. All the other
3589: # variables may be permanently set in the Control Panel\System applet.
3590: #
3591: # You can find out more about the restrictions of this facility at
3592: # <http://www.nentug.org/unix-to-nt/ntposix.htm>.
3593: #
3594: # From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997
3595: ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode,
3596: am, bw, msgr,
3597: cols#80, it#8, lines#25,
3598: bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
3599: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
3600: home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V,
3601: kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m,
3602: ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m,
1.14 millert 3603: # From: jew@venus.sunquest.com
3604: # Date: 19 Feb 93 23:41:07 GMT
3605: # Here's a combination of ansi and vt100 termcap
3606: # entries that works nearly perfectly for me
3607: # (Gateway 2000 Handbook and Microsoft Works 3.0):
3608: pcmw|PC running Microsoft Works,
3609: am, xenl,
3610: cols#80, it#8, lines#24, vt#3,
3611: bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
3612: clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J,
3613: cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
3614: cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
3615: ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H,
3616: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
3617: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>,
3618: rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/lib/tabset/vt100,
3619: ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
3620: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
3621: sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>,
3622: tbc=\E[3g$<2/>,
1.1 millert 3623:
3624: ######## COMMON TERMINAL TYPES
3625: #
3626: # This section describes terminal classes and maker brands that are still
3627: # quite common, but have proprietary command sets not blessed by ANSI.
3628: #
3629:
1.11 millert 3630: #### Altos
1.1 millert 3631: #
1.11 millert 3632: # Altos made a moderately successful line of UNIX boxes. In 1990 they were
3633: # bought out by Acer, a major Taiwanese manufacturer of PC-clones.
3634: # Acer has a web site at http://www.acer.com.
1.1 millert 3635: #
1.11 millert 3636: # Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993
3637: # His comments suggest they were shipped with the system.
1.1 millert 3638: #
3639:
1.11 millert 3640: # (altos2: had extension capabilities
3641: # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
3642: # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
3643: # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
3644: # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
3645: # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
3646: # :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\
3647: # :HL=^AP\r:SP=\E[i:\
3648: # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
3649: # :LO=\E[0q:LC=\E[5q:LL=\E[6q:\
3650: # Comparison with the k* capabilities makes it obvious that the c* things are
3651: # shift keys. I have renamed them to keys 32 and up accordingly. Also,
3652: # :sr: was given as a boolean-- esr)
3653: altos2|alt2|altos-2|altos II,
3654: cols#80, it#8, lines#24, xmc#0,
3655: clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C,
3656: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl=\E[M,
3657: ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
3658: if=/usr/share/tabset/vt100, il1=\E[L, ind=^J,
3659: is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r,
3660: kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D,
3661: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r,
3662: kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
3663: kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
3664: kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
3665: kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
3666: kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r,
3667: nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
3668: smam=\E[?7h, smso=\E[7m, smul=\E[4m,
3669: # (altos3: had extension capabilities
3670: # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
3671: # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
3672: # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
3673: # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
3674: # :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\
3675: # :HL=^AP\r:SP=\E[i:\
3676: # :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\
3677: altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V,
3678: blink=\E[5p, ri=\EM, sgr0=\E[p,
3679: use=altos2,
3680: altos4|alt4|altos-4|altos IV,
3681: use=wy50,
3682: # (altos7: had extension capabilities:
3683: # :GG#0:GI=\EH8:GF=\EH7:\
3684: # :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\
3685: # :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\
3686: # :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\
3687: # :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r:
3688: # Comparison with the k* capabilities makes it obvious that the c* things are
3689: # shift keys. I have renamed them to keys 32 and up accordingly. I have
3690: # also made this entry relative to adm12 in order to give it an <sgr>. The
3691: # <invis> imported by use=adm+sgr may work, let me know. -- esr)
3692: altos7|alt7|altos VII,
3693: am, mir,
3694: cols#80, lines#24, xmc#0,
3695: acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt,
3696: clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
1.1 millert 3697: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 3698: dim=\EGp, dl=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE,
3699: ind=^J, invis=\EG1,
3700: is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r,
3701: kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H,
3702: kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r,
3703: kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r,
3704: kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r,
3705: kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r,
3706: kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
3707: kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r,
3708: knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej,
3709: rmir=\Er, smir=\Eq,
3710: use=adm+sgr,
3711: altos7pc|alt7pc|altos PC VII,
3712: kend=\ET, use=altos7,
3713:
3714: #### Hewlett-Packard (hp)
3715: #
3716: # Hewlett-Packard
3717: # 8000 Foothills Blvd
3718: # Roseville, CA 95747
3719: # Vox: 1-(916)-785-4363 (Technical response line for VDTs)
3720: # 1-(800)-633-3600 (General customer support)
3721: #
1.14 millert 3722: #
3723: # As of March 1998, HP no longer has any terminals in production.
3724: # The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being
3725: # supported (they still have parts). So are the 2392a and 2394a.
3726: # See the WORKSTATION CONSOLES section for the 700s.
3727: #
1.11 millert 3728:
3729: # Generic HP terminal - this should (hopefully) work on any HP terminal.
3730: hpgeneric|hp|hewlett-packard generic terminal,
3731: OTbs, OTpt, am, da, db, mir, xhp,
3732: cols#80, lines#24, lm#0, vt#6,
3733: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
3734: cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM,
3735: ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL,
3736: ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@,
3737: sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3,
3738: vpa=\E&a%p1%dY,
3739:
3740: hp110|hewlett-packard model 110 portable,
3741: lines#16, use=hpgeneric,
3742:
3743: hp+pfk+cr|hp function keys with CR,
3744: kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r,
3745: kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r,
3746:
3747: hp+pfk-cr|hp function keys w/o CR,
3748: kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev,
3749: kf8=\Ew,
3750:
3751: # The hp2621s use the same keys for the arrows and function keys,
3752: # but not separate escape sequences. These definitions allow the
3753: # user to use those keys as arrow keys rather than as function
3754: # keys.
3755: hp+pfk+arrows|hp alternate arrow definitions,
3756: kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@,
3757: kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r,
3758: kll=\Eq\r, kri=\Es\r,
3759:
3760: hp+arrows|hp arrow definitions,
3761: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
3762: kind=\ES, kll=\EF, kri=\ET,
3763:
3764: # Generic stuff from the HP 262x series
1.1 millert 3765: #
1.11 millert 3766: hp262x|HP 262x terminals,
3767: xhp,
3768: blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES,
3769: invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
3770: kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
3771: kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET,
3772: krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
3773: sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c,
3774: sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD,
3775:
3776: # Note: no <home> on HPs since that homes to top of memory, not screen.
3777: # Due to severe 2621 braindamage, the only way to get the arrow keys to
3778: # transmit anything at all is to turn on the function key labels
3779: # with <smkx>, and even then the user has to hold down shift!
3780: # The default 2621 turns off the labels except when it has to to
3781: # enable the function keys. If your installation prefers labels
3782: # on all the time, or off all the time (at the "expense" of the
3783: # function keys), use 2621-nl or 2621-wl.
3784: #
3785: # Note: there are newer ROMs for 2621's that allow you to set
3786: # strap A so the regular arrow keys xmit \EA, etc, as with the
3787: # 2645. However, even with this strap set, the terminal stops
3788: # xmitting if you reset it, until you unset and reset the strap!
3789: # Since there is no way to set/unset the strap with an escape
3790: # sequence, we don't use it in the default.
3791: # If you like, you can use 2621-ba (brain-damaged arrow keys).
3792: hp2621-ba|2621 w/new rom and strap A set,
3793: rmkx@, smkx@, use=hp+arrows,
3794: use=hp2621,
3795:
3796: # hp2621 with function labels. Most of the time they are off,
3797: # but inside vi, the function key labels appear. You have to
3798: # hold down shift to get them to xmit.
3799: hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels,
3800: is2=\E&jA\r, rmkx=\E&jA,
3801: use=hp2621-fl,
3802: hp2621-fl|hp 2621,
3803: xhp@, xon,
3804: pb#19200,
3805: cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>,
3806: ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@,
3807: sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD,
3808: use=hp+pfk+cr, use=hpgeneric,
3809:
3810: # To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p
3811: hp2621p|hp 2621 with printer,
3812: mc4=\E&p13C, mc5=\E&p11C, use=hp2621,
3813:
3814: hp2621p-a|hp2621p with fn as arrows,
3815: use=hp+pfk+arrows, use=hp2621p,
3816:
3817: # hp2621 with k45 keyboard
3818: hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard,
3819: kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
3820: khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A,
3821: use=hp2621,
3822:
3823: # 2621 using all 48 lines of memory, only 24 visible at any time.
3824: hp2621-48|48 line 2621,
3825: lines#48,
3826: cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, use=hp2621,
3827:
3828: # 2621 with no labels ever. Also prevents vi delays on escape.
3829: hp2621-nl|hp 2621 with no labels,
3830: kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, use=hp2621-fl,
3831:
3832: # Needed for UCB ARPAVAX console, since lsi-11 expands tabs
3833: # (wrong).
1.1 millert 3834: #
1.11 millert 3835: hp2621-nt|hp 2621 w/no tabs,
3836: ht@, use=hp2621,
3837:
3838: # Hp 2624 B with 4 or 10 pages of memory.
3839: #
3840: # Some assumptions are made with this entry. These settings are
3841: # NOT set up by the initialization strings.
1.1 millert 3842: #
1.11 millert 3843: # Port Configuration
3844: # RecvPace=Xon/Xoff
3845: # XmitPace=Xon/Xoff
3846: # StripNulDel=Yes
1.1 millert 3847: #
1.11 millert 3848: # Terminal Configuration
3849: # InhHndShk=Yes
3850: # InhDC2=Yes
3851: # XmitFnctn(A)=No
3852: # InhEolWrp=No
1.1 millert 3853: #
1.11 millert 3854: # Note: the 2624 DOES have a true <home>, believe it or not!
1.1 millert 3855: #
1.11 millert 3856: # The 2624 has an "error line" to which messages can be sent.
3857: # This is CLOSE to what is expected for a "status line". However,
3858: # after a message is sent to the "error line", the next carriage
3859: # return is EATEN and the "error line" is turned back off again!
3860: # So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>.
1.1 millert 3861: #
1.11 millert 3862: # This entry supports emacs (and any other program that uses raw
3863: # mode) at 4800 baud and less. I couldn't get the padding right
3864: # for 9600.
1.1 millert 3865: #
1.11 millert 3866: # (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr)
3867: hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B,
3868: da, db,
3869: lm#96,
3870: flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, use=hp+labels, use=scrhp,
3871:
3872: # This hp2626 entry does not use any of the fancy windowing stuff
3873: # of the 2626.
3874: #
3875: # Indeed, terminfo does not yet handle such stuff. Since changing
3876: # any window clears memory, it is probably not possible to use
3877: # this for screen opt.
3878: #
3879: # ed is incredibly slow most of the time - I am guessing at the
3880: # exact padding. Since the terminal uses xoff/xon this is intended
3881: # only for cost computation, so that the terminal will prefer el
3882: # or even dl1 which is probably faster!
3883: #
3884: # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only
3885: # extra slow on the last line of the window.
3886: #
3887: # The padding probably should be changed.
1.1 millert 3888: #
1.11 millert 3889: hp2626|hp2626a|hp2626p|hp 2626,
3890: da, db,
3891: lm#0, pb#19200,
3892: ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>,
3893: is2=\E&j@\r, rin=\E&r%p1%dU,
3894: use=hp+pfk+cr, use=hp+labels, use=scrhp,
3895:
3896: # This entry is for sysline. It allocates a 23 line window with
3897: # a 115 line workspace for regular use, and a 1 line window for
3898: # the status line.
3899: #
3900: # This assumes port 2 is being used.
3901: # Turn off horizontal line, Create ws #1 with 115 lines,
3902: # Create ws #2 with 1 line, Create window #1 lines 1-23,
3903: # Create window #2 lines 24-24, Attach cursor to workspace #1.
3904: # Note that this clears the tabs so it must be done by tset before
3905: # it sets the tabs.
1.1 millert 3906: #
1.11 millert 3907: hp2626-s|hp 2626 using only 23 lines,
3908: eslok, hs,
3909: lines#23,
3910: fsl=\E&d@\E&w7f2p1I\E&w4f1I,
3911: is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
3912: tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC,
3913: use=hp2626,
3914: # Force terminal back to 24 lines after being 23.
3915: hp2626-ns|hp 2626 using all 24 lines,
3916: is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r, use=hp2626,
3917: # Various entries useful for small windows on 2626.
3918: hp2626-12|hewlett-packard 2626 12 lines,
3919: lines#12, use=hp2626,
3920: hp2626-12x40|hewlett-packard 2626 12 lines 40 columns,
3921: cols#40, lines#12, use=hp2626,
3922: hp2626-x40|hewlett-packard 2626 40 columns,
3923: cols#40, use=hp2626,
3924: hp2626-12-s|hewlett-packard 2626 11 lines plus status,
3925: lines#11, use=hp2626-s,
3926:
1.1 millert 3927: #
1.11 millert 3928: # hp2627 color tubes from University of Wisconsin
1.1 millert 3929: #
1.11 millert 3930: hp2627a-rev|hp 2627 with reverse video colors,
3931: cr=^M, cud1=^J, ht=^I, ind=^J,
3932: is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r,
3933: kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@,
3934: smul=\E&dD\E&v1S,
3935: use=hp2621-nl,
3936: hp2627a|hp 2627 color terminal with no labels,
3937: cr=^M, cud1=^J, ht=^I, ind=^J,
3938: is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r,
3939: kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S,
3940: rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S,
3941: use=hp2621-nl,
3942: hp2627c|hp 2627 color (cyan) terminal with no labels,
3943: cr=^M, cud1=^J, ht=^I, ind=^J,
3944: is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r,
3945: kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
3946: use=hp2627a,
3947:
3948: # hp2640a doesn't have the Y cursor addressing feature, and C is
3949: # memory relative instead of screen relative, as we need.
1.1 millert 3950: #
1.11 millert 3951: hp2640a|hp 2640a,
3952: cup@, rmkx@, smkx@, use=hp2645,
3953:
3954: hp2640b|hp2644a|hp 264x series,
3955: rmkx@, smkx@, use=hp2645,
3956:
3957: # (hp2641a: removed unknown :gu: -- esr)
3958: hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry,
3959: am, da, db, mir, xhp,
3960: cols#80, lines#24,
3961: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
3962: cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM,
3963: ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I,
3964: if=/usr/share/tabset/std, il1=\EL, ind=^J,
3965: is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
3966: rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB,
3967: vpa=\E&a%p1%2dY,
3968:
3969: # This terminal should be used at 4800 baud or less. It needs padding for
3970: # plain characters at 9600, I guessed at an appropriate cr delay. It really
3971: # wants ^E/^F handshaking, but that doesn't work well even if you write
3972: # software to support it.
3973: hp2645|hp45|HP 2645 series,
3974: pb#9600,
3975: blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED,
3976: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
3977: ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL,
3978: kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB,
3979: rmkx=\E&s0A,
3980: sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c,
3981: sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD,
3982: use=hpgeneric,
3983: # You should use this terminal at 4800 baud or less.
3984: hp2648|hp2648a|HP 2648a graphics terminal,
3985: clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
3986: dch1=\EP$<7>, ip=$<5>,
3987: use=hp2645,
3988:
3989: # The HP 150 terminal is a fairly vanilla HP terminal, with the
3990: # clreol standout problem. It also has graphics capabilities and
3991: # a touch screen, which we don't describe here.
3992: hp150|hewlett packard Model 150,
3993: OTbs, use=hp2622,
3994:
3995: # HP 2382a terminals, "the little ones." They don't have any
3996: # alternate character set support and sending out ^N/^O will
3997: # leave the screen blank.
3998: hp2382a|hp2382|hewlett packard 2382a,
3999: da, db,
4000: lh#1, lm#48,
4001: acsc@,
4002: pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
4003: rmacs@,
4004: sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c,
4005: sgr0=\E&d@, smacs@,
4006: use=hp+labels, use=scrhp,
4007:
4008: hp2621-a|hp2621a-a|hp2621 with fn as arrows,
4009: use=hp+pfk+arrows, use=hp2621-fl,
4010:
4011: # newer hewlett packard terminals
4012:
4013: newhpkeyboard|generic entry for HP extended keyboard,
4014: kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4015: kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh,
4016: kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV,
4017: kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A,
4018: use=hp+pfk-cr,
4019:
4020: newhp|generic entry for new hewlett packard terminals,
4021: am, bw, mir, xhp, xon,
4022: cols#80, lines#24, pb#4800,
4023: acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x.,
4024: bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H,
4025: cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH,
4026: dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J,
4027: invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J,
4028: pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s,
4029: pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s,
4030: pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET,
4031: rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg,
4032: sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;,
4033: sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD,
4034: tbc=\E3,
4035: use=newhpkeyboard,
4036:
4037: memhp|memory relative addressing for new HP ttys,
4038: vt#6,
4039: clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR,
4040: cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR,
4041: home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r,
4042: mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp,
4043:
4044: scrhp|screen relative addressing for new HP ttys,
4045: clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC,
4046: cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC,
4047: cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR,
4048: home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA,
4049: mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp,
4050:
4051: # (hp+labels: added label values from a BRL termcap -- esr)
4052: hp+labels|"standard" label info for new HP ttys,
4053: lh#2, lw#8, nlab#8,
4054: lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8,
4055: pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s,
4056: rmln=\E&j@, smln=\E&jB,
4057:
4058: hp+printer|"standard" printer info for HP ttys,
4059: ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C,
4060:
4061:
4062: # The new hp2621b is kind of a cross between the old 2621 and the
4063: # new 262x series of machines. It has dip-switched options.
4064: # The firmware has a bug in it such that if you give it a null
4065: # length label, the following character is eaten!
4066: hp2621b|hp 2621b with old style keyboard,
4067: lh#1, lm#48, lw#8, nlab#8,
4068: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
4069: kind=\ET, kll=\EF, kri=\ES,
4070: pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r,
4071: smln=\E&jB,
4072: use=hp2621,
4073:
4074: hp2621b-p|hp 2621b with printer,
4075: use=hp+printer, use=hp2621b,
4076:
4077: # hp2621b - new 2621b with new extended keyboard
4078: # these are closer to the new 26xx series than the other 2621b
4079: hp2621b-kx|hp 2621b with extended keyboard,
4080: use=newhpkeyboard, use=hp2621b,
4081:
4082: hp2621b-kx-p|hp 2621b with new keyboard & printer,
4083: use=hp+printer, use=hp2621b-kx,
4084:
4085: # Some assumptions are made in the following entries.
4086: # These settings are NOT set up by the initialization strings.
4087: #
4088: # Port Configuration
4089: # RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes
4090: #
4091: # Terminal Configuration
4092: # InhHndShk(G)=Yes InhDC2(H)=Yes
4093: # XmitFnctn(A)=No InhEolWrp=No
1.1 millert 4094: #
1.11 millert 4095: #
4096: # Hp 2622a & hp2623a display and graphics terminals
1.1 millert 4097: #
1.11 millert 4098: hp2622|hp2622a|hp 2622,
4099: da, db,
4100: lm#0, pb#19200,
4101: is2=\E&dj@\r, use=hp+pfk+cr, use=hp+labels, use=scrhp,
4102:
4103: # The 2623 is a 2622 with extra graphics hardware.
4104: hp2623|hp2623a|hp 2623,
4105: use=hp2622,
4106:
4107: hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer,
4108: use=hp+printer, use=hp2624,
4109:
4110: # The hewlett packard B can have an optional extra 6 pages of memory.
4111: hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory,
4112: lm#240, use=hp2624,
4113:
4114: hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer,
4115: lm#240, use=hp2624b-p,
4116:
4117: # Color manipulations for HP terminals
4118: hp+color|hp with colors,
4119: ccc,
4120: colors#16, ncv#17, pairs#7,
4121: initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI,
4122: oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I,
4123: op=\E&v0S, scp=\E&v%p1%dS,
4124:
4125: # <is2> sets the screen to be 80 columns wide
4126: hp2397a|hp2397|hewlett packard 2397A color terminal,
4127: is2=\E&w6f80X,
4128: use=memhp, use=hp+labels, use=hp+color,
4129:
4130: # HP 700/44 Setup parameters:
4131: # Terminal Mode HP-PCterm
4132: # Inhibit Auto Wrap NO
4133: # Status Line Host Writable
4134: # PC Character Set YES
4135: # Twenty-Five Line Mode YES
4136: # XON/XOFF @128 or 64 (sc)
4137: # Keycode Mode NO or YES (sc)
4138: # Backspace Key BS or BS/DEL
1.1 millert 4139: #
1.11 millert 4140: # <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key;
4141: # \E\\? does not turn off keycode mode
4142: # <smsc> sets alternate start/stop; keycode on
4143: hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode,
4144: am, eo, xenl, xon,
4145: cols#80, lines#25,
4146: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
4147: bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H,
4148: cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
4149: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
4150: ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
4151: ind=^J,
4152: is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\,
4153: kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
4154: kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
4155: kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~,
4156: kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~,
4157: kpp=\E[5~, rmam=\E[?7l,
4158: rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m,
4159: rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
4160: smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m,
4161: smul=\E[4m, xoffc=g, xonc=e,
1.1 millert 4162: #
1.11 millert 4163: # (hp2392: copied <rmir> here from hpex -- esr)
4164: hp2392|239x series,
4165: cols#80,
4166: cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r,
4167: kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r,
4168: kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV,
4169: rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY,
4170: use=hpsub,
4171:
4172: hpsub|hp terminals -- capability subset,
4173: am, da, db, mir, xhp, xon,
4174: lines#24,
4175: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
4176: cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC,
4177: ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J,
4178: is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB,
4179: kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@,
4180: sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB,
4181:
4182: # hpex:
4183: # May be used for most 24 x 80 hp terminals,
4184: # but has no padding added, so may allow runover in some terminals at high
4185: # baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and
4186: # hp98x5 terminal emulators or hp98x6 consoles.
4187: # Adds xy-cursor addressing, vertical cursor addressing, home,
4188: # last line, and underline capabilities.
1.1 millert 4189: #
1.11 millert 4190: # (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:",
4191: # moved <rmir> here from hpsub -- esr)
4192: hpex|hp extended capabilites,
4193: cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H,
4194: kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ,
4195: smul=\E&dD, vpa=\E&a%p1%dY,
4196: use=hpsub,
4197:
4198: # From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996
4199: hp2|hpex2|hewlett-packard extended capabilities newer version,
4200: am, da, db, mir, xhp,
4201: cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0,
4202: bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
4203: cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
4204: dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
4205: il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
4206: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
4207: ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
4208: kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
4209: kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
4210: krmir=\ER, ktbc=\E3, meml=\El, memu=\Em,
4211: pfkey=\E&f%p1%dk%p2%l%dL%p2%s,
4212: pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s,
4213: pfx=\E&f2a%p1%dk%p2%l%dL%p2%s,
4214: pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A,
4215: rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
4216: sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;,
4217: sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB,
4218: smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4219:
4220: # HP 236 console
4221: # From: <ddavis@ic.berkeley.edu>
4222: hp236|hp236 internal terminal emulator,
4223: OTbs, am,
4224: cols#80, lines#24,
4225: clear=\EF, cnorm=\EDE, cub1=^H,
4226: cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB,
4227: dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI,
4228: sgr0=\ECI, smso=\EBI,
4229:
4230: # This works on a hp300 console running Utah 4.3 BSD
4231: # From: Craig Leres <leres@okeeffe.berkeley.edu>
4232: hp300h|HP Catseye console,
4233: OTbs, am, da, db, mir, xhp,
4234: cols#128, lines#51, lm#0, xmc#0,
4235: bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB,
4236: cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
4237: dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I,
4238: if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H,
4239: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh,
4240: rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@,
4241: smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3,
4242: vpa=\E&a%p1%dY,
4243: # From: Greg Couch <gregc@ernie.berkeley.edu>
4244: hp9837|hp98720|hp98721|HP 9000/300 workstations,
4245: OTbs, am, da, db, mir, xhp,
4246: cols#128, it#8, lines#46, lm#0,
4247: bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB,
4248: cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP,
4249: dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
4250: il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED,
4251: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
4252: ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU,
4253: kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@,
4254: sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD,
4255: tbc=\E3, vpa=\E&a%p1%dY,
4256: # HP 9845 desktop computer from BRL
4257: # (hp9845: removed unknown capability :gu: -- esr)
4258: hp9845|HP 9845,
4259: OTbs, am, da, db, eo, mir, xhp,
4260: cols#80, lines#21,
4261: OTbc=\ED, clear=\EH\EJ, cuf1=\EC, cup=\E&a%p2%2dc%p1%2dY,
4262: cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK,
4263: if=/usr/share/tabset/std, il1=\EL, rmir=\ER, rmso=\E&d@,
4264: smir=\EQ, smso=\E&dB,
4265: # From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90
4266: # (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>;
4267: # added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr)
4268: hp98550|hp98550a|HP 9000 Series 300 color console,
4269: OTbs, am, da, db, mir, xhp,
4270: cols#128, it#8, lines#49, lm#0,
4271: acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR,
4272: clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
4273: cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH,
4274: dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1,
4275: if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds,
4276: kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
4277: kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep,
4278: kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
4279: khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF,
4280: knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ,
4281: rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@,
4282: sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ,
4283: smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4284: # From: Victor Duchovni <vic@fine.princeton.edu>
4285: # (hp700-wy: removed obsolete ":nl=^J:";
4286: # replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr)
4287: hp700-wy|HP700/41 emulating wyse30,
4288: OTbs, am, bw, mir, msgr,
4289: cols#80, it#8, lines#24, xmc#1,
4290: cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
4291: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
4292: dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1,
4293: if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>,
4294: is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI,
4295: kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY,
4296: kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K,
4297: ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>,
4298: sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>,
4299: smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c,
1.14 millert 4300: hp70092|hp70092a|hp70092A|HP 700/92,
1.11 millert 4301: am, da, db, xhp,
4302: cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8,
4303: acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA,
4304: bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H,
4305: cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA,
4306: dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I,
4307: hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED,
4308: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM,
4309: ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
4310: kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ,
4311: kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET,
4312: krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER,
4313: rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@,
4314: sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB,
4315: smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
4316:
4317: bobcat|sbobcat|HP 9000 model 300 console,
4318: am, da, db, mir, xhp,
4319: cols#128, it#8, lines#47, xmc#0,
4320: cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
4321: cup=\E&a%dy%dC$<6/>, cuu1=\EA, dch1=\EP, dl1=\EM$<10*/>,
4322: ed=\EJ, el=\EK, hpa=\E&a%dC$<6/>, ht=^I, il1=\EL$<10*/>,
4323: ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
4324: khome=\Eh, nel=^M^J, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@,
4325: rmul=\E&d@, sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&dB,
4326: smul=\E&dD, vpa=\E&a%dY$<6/>,
4327: gator-t|HP 9000 model 237 emulating extra-tall AAA,
4328: lines#94, use=gator,
4329: gator|HP 9000 model 237 emulating AAA,
4330: bw, km, mir, ul,
4331: cols#128, it#8, lines#47,
4332: bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J,
4333: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM,
4334: dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>,
4335: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`,
4336: ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>,
4337: il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J,
4338: rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m,
4339: rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
4340: gator-52|HP 9000 model 237 emulating VT52,
4341: cols#128, lines#47, use=vt52,
4342: gator-52t|HP 9000 model 237 emulating extra-tall VT52,
4343: lines#94, use=gator-52,
4344:
4345: #### Honeywell-Bull
1.1 millert 4346: #
1.11 millert 4347: # From: Michael Haardt <michael@gandalf.moria> 11 Jan 93
1.1 millert 4348: #
1.11 millert 4349:
4350: # Honeywell Bull terminal. Its cursor and function keys send single
4351: # control characters and it has standout/underline glitch. Most programs
4352: # do not like these features/bugs. Visual bell is realized by flashing the
4353: # "keyboard locked" LED.
4354: dku7003-dumb|Honeywell Bull DKU 7003 dumb mode,
4355: cols#80, lines#25,
4356: clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X,
4357: cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K,
4358: flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y,
4359: kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J,
4360: dku7003|Honeywell Bull DKU 7003 all features described,
4361: msgr,
4362: xmc#1,
4363: blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m,
4364: rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
4365: use=dku7003-dumb,
4366:
4367: #### Lear-Siegler (adm)
1.1 millert 4368: #
1.11 millert 4369: # These guys are long since out of the terminals business, but
4370: # in 1995 many current terminals still have an adm type as one of their
4371: # emulations (usually their stupidest, and usually labeled adm3, though
4372: # these `adm3' emulations normally have adm3a+ capabilities).
4373: #
4374: # WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a
4375: # `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator')
4376: # was being held to ground would trigger a send of the top line on the screen.
4377: # A quick fix might be to drop back to a cheesy 4-wire cable with pin 22
4378: # hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>,
4379: # for clearing up this point.)
4380:
4381: adm1a|adm1|lsi adm1a,
4382: am,
4383: cols#80, lines#24,
4384: bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4385: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^,
4386: ind=^J,
4387: adm2|lsi adm2,
4388: OTbs, am,
4389: cols#80, lines#24,
4390: bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4391: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
4392: dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J,
4393: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
4394: # (adm3: removed obsolete ":ma=^K^P:" -- esr)
4395: adm3|lsi adm3,
4396: OTbs, am,
4397: cols#80, lines#24,
4398: bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J,
4399: # The following ADM-3A switch settings are assumed for normal operation:
4400: # SPACE U/L_DISP CLR_SCRN 24_LINE
4401: # CUR_CTL LC_EN AUTO_NL FDX
4402: # Other switches may be set for operator convenience or communication
4403: # requirements. I recommend
4404: # DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF
4405: # ETX_OFF EOT_OFF
4406: # Most of these terminals required an option ROM to support lower case display.
4407: # Open the case and look at the motherboard; if you see an open 24-pin DIP
4408: # socket, you may be out of luck.
4409: #
4410: # (adm3a: some capabilities merged in from BRl entry -- esr)
4411: adm3a|lsi adm3a,
4412: OTbs, am,
4413: cols#80, lines#24,
4414: OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H,
4415: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
4416: cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L,
4417: kcuu1=^K, rs2=^N,
4418: adm3a+|adm3a plus,
4419: kbs=^H, use=adm3a,
4420: # (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr)
4421: adm5|lsi adm5,
4422: xmc#1,
4423: bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^,
4424: rmso=\EG, smso=\EG,
4425: use=adm3a+,
4426: # A lot of terminals other than adm11s use these. Wherever you see
4427: # use=adm+sgr with some of its capabilities disabled, try the
4428: # disabled ones. They may well work but not have been documented or
4429: # expressed in the using entry. We'd like to cook up an <sgr> but the
4430: # <rmacs>/<smacs> sequences of the using entries vary too much.
4431: adm+sgr|adm style highlight capabilities,
4432: invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0,
4433: smso=\EG4, smul=\EG8,
4434: # LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL
4435: # Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs>
4436: # <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also
4437: # be ^Z, according to his entry.
4438: # (adm11: <smul>=\EG4 was obviously erroneous because it also said
4439: # <rev>=\EG4. Looking at other ADMs confirms this -- esr)
4440: adm11|LSI ADM-11,
4441: OTbs, am, hs,
4442: OTkn#8, cols#80, lines#24,
4443: OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H,
4444: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
4445: cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I,
4446: kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
4447: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
4448: kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E),
4449: use=adm+sgr,
4450: # From: Andrew Scott Beals <bandy@lll-crg.ARPA>
4451: # Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995
4452: # Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996
4453: # (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had
4454: # <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost>
4455: # via BRL. That entry asserted <xmc#1>, but I've left that out because
4456: # neither earlier nor later ADMSs have it -- esr)
4457: #
4458: # You will need to get into the supervisor setup before you can set
4459: # baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should
4460: # see a lot more setup options.
4461: #
4462: # While in supervisor setup you can also use following codes:
4463: #
4464: # Ctrl-P Personality character selections (configure for example what
4465: # arrow keys send, if I recall correctly)
4466: # Ctrl-T tabs 1-80 use left&right to move and up to set and
4467: # Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor
4468: # Ctrl-B Binary setup (probably not needed. I think that everything can
4469: # be set using normal setup)
4470: # Ctrl-A Answerback mode (enter answerback message)
4471: # Ctrl-U User friendly mode (normal setup)
4472: # Ctrl-D Defaults entire setup and function keys from EPROM tables
4473: # Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds.
4474: # Ctrl-R Reads both setup and functions keys from NVM.
4475: # Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status
4476: #
4477: # ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to
4478: # RTS/CTS used nowadays with virtually every modem and computer. 19200
4479: # bps works fine with hardware flow control.
4480: #
4481: # The following null-modem cable should fix this and enable you to use
4482: # RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also
4483: # set ADM-12+ for DTR handshaking from supervisor setup.
4484: #
4485: # PC Serial ADM-12+
4486: # -------- -------
4487: # 2 - 3
4488: # 3 - 2
4489: # 4 - 5
4490: # 5 - 20
4491: # 6,8 - 4
4492: # 7 - 7
4493: # 20 - 6,8
4494: #
4495: adm12|lsi adm12,
4496: OTbs, OTpt, am, mir,
4497: OTug#1, cols#80, it#8, lines#24,
4498: bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4499: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
4500: dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
4501: is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1,
4502: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
4503: kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
4504: kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0,
4505: use=adm+sgr,
4506: # (adm20: removed obsolete ":kn#7:" -- esr)
4507: adm20|lear siegler adm20,
4508: OTbs, am,
4509: cols#80, it#8, lines#24,
4510: bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L,
4511: cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW,
4512: dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE,
4513: kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(,
4514: sgr0=\E(, smso=\E),
4515: adm21|lear siegler adm21,
4516: xmc#1,
4517: bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET,
4518: ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H,
4519: kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
4520: use=adm+sgr, use=adm3a,
4521: # (adm22: ":em=:" was an obvious typo for ":ei=:"; also,
4522: # removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :";
4523: # removed bogus-looking \200 from before <cup>. -- esr)
4524: adm22|lsi adm22,
4525: OTbs, am,
4526: cols#80, lines#24,
4527: bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4528: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
4529: dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE,
4530: is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0,
4531: kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r,
4532: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
4533: kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
4534: lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E),
4535: # ADM 31 DIP Switches
4536: #
4537: # This information comes from two versions of the manual for the
4538: # Lear-Siegler ADM 31.
4539: #
4540: # Main board:
4541: # rear of case
4542: # +-||||-------------------------------------+
4543: # + S1S2 ||S +
4544: # + ||3 +
4545: # + +
4546: # + ||S +
4547: # + ||4 +
4548: # + +
4549: # + +
4550: # + +
4551: # + +
4552: # + +
4553: # +-+ +-+
4554: # + +
4555: # + S5 S6 S7 +
4556: # + == == == +
4557: # +----------------------------------------------+
4558: # front of case (keyboard)
4559: #
4560: # S1 - Data Rate - Modem
4561: # S2 - Data Rate - Printer
4562: # ------------------------
4563: # Data Rate Setting
4564: # -------------------
4565: # 50 0 0 0 0
4566: # 75 1 0 0 0
4567: # 110 0 1 0 0
4568: # 134.5 1 1 0 0
4569: # 150 0 0 1 0
4570: # 300 1 0 1 0
4571: # 600 0 1 1 0
4572: # 1200 1 1 1 0
4573: # 1800 0 0 0 1
4574: # 2000 1 0 0 1
4575: # 2400 0 1 0 1
4576: # 3600 1 1 0 1
4577: # 4800 0 0 1 1
4578: # 7200 1 0 1 1
4579: # 9600 0 1 1 1
4580: # x 1 1 1 1
4581: #
4582: # S3 - Interface/Printer/Attributes
4583: # ---------------------------------
4584: # Printer Busy Control
4585: # sw1 sw2 sw3
4586: # ---------------
4587: # off off off Busy not active, CD disabled
4588: # off off on Busy not active, CD enabled
4589: # off on off Busy active on J5-20, CD disabled
4590: # on off off Busy active on J5-19, CD disabled - Factory Set.
4591: # on off on Busy active on J5-19, CD enabled
4592: #
4593: # sw4 Used in conjuction with S4 for comm interface control - Fact 0
4594: #
4595: # sw5 Secondary Channel Control (Hardware implementation only) - Fact 0
4596: #
4597: # sw6 ON enables printer BUSY active LOW - Factory Setting
4598: # OFF enables printer BUSY active HIGH - If set to this, ADM31 senses
4599: #
4600: # sw7 ON - steady cursor - Factory Setting
4601: # OFF - blinking cursor
4602: #
4603: # sw8 ON causes selected attribute character to be displayed
4604: # OFF causes SPACE to be displayed instead - Factory Setting
4605: #
4606: # S4 - Interface
4607: # --------------
4608: # Modem Interface
4609: # S3 S4 S4 S4 S4
4610: # sw4 sw1 sw2 sw3 sw4
4611: # ---------------------------
4612: # OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and
4613: # Current Loop disabled - Factory Setting
4614: # ON ON OFF ON OFF Enable Current Loop interface, Direct Connect
4615: # disabled
4616: # OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and
4617: # Current Loop Disabled
4618: #
4619: # sw5 ON disables dot stretching mode - Factory Setting
4620: # OFF enables dot stretching mode
4621: # sw6 ON enables blanking function
4622: # OFF enables underline function - Factory Setting
4623: # sw7 ON causes NULLS to be displayed as NULLS
4624: # OFF causes NULLS to be displayed as SPACES - Factory Setting
4625: #
4626: # S5 - Word Structure
4627: # -------------------
4628: # sw1 ON enables BREAK key - Factory Setting
4629: # OFF disables BREAK key
4630: # sw2 ON selects 50Hz monitor refresh rate
4631: # OFF selects 60Hz monitor refresh rate - Factory Setting
4632: #
4633: # Modem Port Selection
4634: # sw3 sw4 sw5
4635: # ---------------
4636: # ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits
4637: # OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits
4638: # ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set.
4639: # OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit
4640: # ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits
4641: # OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit
4642: # ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit
4643: # OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit
1.1 millert 4644: #
4645: # sw6 ON sends bit 8 a 1 (mark)
4646: # OFF sends bit 8 as 0 (space) - Factory Setting
4647: # sw7 ON selects Block Mode
4648: # OFF selects Conversation Mode - Factory Setting
4649: # sw8 ON selects Full Duplex operation
4650: # OFF selects Half Duplex operation - Factory Setting
4651: #
4652: # S6 - Printer
4653: # ------------
4654: # sw1, sw2, sw6, sw7 Reserved - Factory 0
4655: #
4656: # Printer Port Selection
4657: # same as Modem above, bit 8 (when 8 DATA bits) is always = 0
4658: #
4659: # sw8 ON enables Printer Port
4660: # OFF disables Printer Port - Factory Setting
4661: #
4662: # S7 - Polling Address
4663: # --------------------
4664: # sw1-7 Establish ASCII character which designates terminal polling address
4665: # ON = logic 0
4666: # OFF = logic 1 - Factory Setting
4667: # sw8 ON enables Polling Option
4668: # OFF disables Polling Option - Factory Setting
4669: #
4670: #
4671: # On some older adm31s, S4 does not exist, and S5-sw6 is not defined.
4672: #
4673: # This adm31 entry uses underline as the standout mode.
4674: # If the adm31 gives you trouble with standout mode, check the DIP switch in
4675: # position 6, bank @c11, 25% from back end of the circuit board. Should be
4676: # OFF. If there is no such switch, you have an old adm31 and must use oadm31.
4677: # (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr)
4678: adm31|lsi adm31 with sw6 set for underline mode,
1.11 millert 4679: OTbs, am, mir,
1.1 millert 4680: cols#80, lines#24,
4681: bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4682: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 4683: dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0,
4684: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
4685: kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
4686: kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0,
1.1 millert 4687: rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1,
1.11 millert 4688: adm31-old|o31|old adm31,
4689: rmul@, smso=\EG4, smul@, use=adm31,
1.1 millert 4690: # LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL
4691: adm36|LSI ADM36,
1.11 millert 4692: OTbs, OTpt,
1.1 millert 4693: OTkn#4,
4694: if=/usr/lib/tabset/vt100,
1.11 millert 4695: is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, use=vt100,
1.1 millert 4696: # (adm42: removed obsolete ":ma=^K^P:" -- esr)
4697: adm42|lsi adm42,
4698: OTbs, am,
4699: cols#80, lines#24,
4700: bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
4701: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
1.11 millert 4702: cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I,
4703: il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J,
4704: kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@,
4705: smir=\Eq, smul@,
4706: use=adm+sgr,
1.1 millert 4707: # The following termcap for the Lear Siegler ADM-42 leaves the
4708: # "system line" at the bottom of the screen blank (for those who
4709: # find it distracting otherwise)
1.11 millert 4710: adm42-ns|lsi adm-42 with no system line,
4711: cbt=\EI\EF \011, clear=\E;\EF \011,
4712: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011,
4713: dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011,
4714: el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011,
4715: smir=\Eq\EF \011,
4716: use=adm42,
1.1 millert 4717: # ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985.
4718: # The insert mode of this terminal is commented out because it's broken for our
4719: # purposes in that it will shift the position of every character on the page,
4720: # not just the cursor line!
4721: # From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996
4722: adm1178|1178|lsi adm1178,
4723: am,
4724: cols#80, lines#24, xmc#1,
4725: bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J,
4726: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
4727: cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET,
4728: home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H,
1.11 millert 4729: kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0,
4730: sgr0=\E), smso=\EG4, smul=\EG1,
4731:
4732: #### Prime
4733: #
4734: # Yes, Prime made terminals. These entries were posted by Kevin J. Cummings
4735: # <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr.
4736: # Prime merged with ComputerVision in the late 1980s; you can reach them at:
4737: #
4738: # ComputerVision Services
4739: # 500 Old Connecticut Path
4740: # Framingham, Mass.
4741: #
4742:
4743: # Standout mode is dim reverse-video.
4744: pt100|pt200|wren|fenix|prime pt100/pt200,
4745: am, bw, mir, msgr,
4746: cols#80, it#8, lines#24,
4747: cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H,
4748: cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C,
4749: cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA,
4750: cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[M,
4751: ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P,
4752: home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D,
4753: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J,
4754: rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m,
4755: sgr0=\E[m,
4756: smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q,
4757: smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m,
4758: pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode,
4759: cols#132,
4760: cup=\E[%i%p1%d;%p2%dH, use=pt100,
4761: pt250|Prime PT250,
4762: rmso@, smso@, use=pt100,
4763: pt250w|Prime PT250 in 132-column mode,
4764: rmso@, smso@, use=pt100w,
1.1 millert 4765:
4766: #### Qume (qvt)
4767: #
4768: # Qume, Inc.
4769: # 3475-A North 1st Street
4770: # San Jose CA 95134
4771: # Vox: (800)-457-4447
4772: # Fax: (408)-473-1510
4773: # Net: josed@techsupp.wyse.com (Jose D'Oliveira)
4774: #
4775: # Qume was bought by Wyse, but still (as of early 1995) has its own support
4776: # group and production division.
4777: #
4778: # Discontinued Qume models:
4779: #
4780: # The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+
4781: # built to replace them, and a qvt119+ which was a 101+ with available wide
4782: # mode (132 columns). There was a qvt103 which added vt100/vt131 emulations
4783: # and an ANSI-compatible qvt203 that replaced it. Qume started producing
4784: # ANSI-compatible terminals with the qvt323 and qvt61.
4785: #
4786: # Current Qume models (as of February 1995):
4787: #
4788: # All current Qume terminals have ANSI-compatible operation modes.
4789: # Qume is still producing the qvt62, which features emulations for other
4790: # popular lines such as ADDS, and dual-host capabilities. The qvt82 is
4791: # designed for use as a SCO ANSI terminal. The qvt70 is a color terminal
4792: # with many emulations including Wyse370, Wyse 325, etc. Their newest
4793: # model is the qvt520, which is vt420-compatible.
4794: #
4795: # There are some ancient printing Qume terminals under `Daisy Wheel Printers'
4796: #
4797: # If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its
4798: # setup mode. Shift-s should be a configuration save to NVRAM.
4799:
1.11 millert 4800: qvt101|qvt108|qume qvt 101 and QVT 108,
1.1 millert 4801: xmc#1, use=qvt101+,
4802:
4803: # This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap
4804: # file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked
4805: # both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E).
4806: # What seems to be going on here is that this entry was designed so that
4807: # the normal highlight is bold and standout is dim plus something else
4808: # (reverse-video maybe? But then, are there two <rev> sequences?)
1.11 millert 4809: qvt101+|qvt101p|qume qvt 101 PLUS product,
4810: am, bw, hs, ul,
4811: cols#80, lines#24, xmc#0,
4812: bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J,
4813: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
4814: dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
4815: flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
4816: ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H,
4817: kcud1=^J, kcuf1=^L, kcuu1=^K, kdl1=\ER, ked=\EY, kel=\ET,
4818: kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
4819: kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
4820: khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, rmso=\E(,
4821: smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef,
4822: use=adm+sgr,
4823: qvt102|qume qvt 102,
4824: cnorm=\E., use=qvt101,
1.1 millert 4825: # (qvt103: added <rmam>/<smam> based on init string -- esr)
1.11 millert 4826: qvt103|qume qvt 103,
4827: am, xenl, xon,
4828: cols#80, it#8, lines#24, vt#3,
4829: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
4830: clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
4831: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
4832: cuf=\E[%p1%dC, cuf1=\E[C$<2>,
4833: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
4834: cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I,
4835: hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
4836: kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8,
4837: rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>,
4838: rmso=\E[m$<2>, rmul=\E[m$<2>,
4839: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
4840: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
4841: sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=,
4842: smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
4843: qvt103-w|qume qvt103 132 cols,
4844: cols#132, lines#24,
4845: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103,
4846: qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals,
4847: am, hs, mir, msgr,
4848: cols#80, lines#24, xmc#0,
4849: bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H,
4850: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
4851: cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey,
4852: el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I,
4853: hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX,
4854: kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r,
4855: kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
4856: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
4857: mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8,
4858: tbc=\E3, tsl=\Eg\Ef,
4859: use=adm+sgr,
4860: qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines,
4861: lines#25, use=qvt119+,
4862: qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode,
4863: cols#132,
4864: is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+,
4865: qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25,
1.1 millert 4866: lines#25, use=qvt119+,
4867: qvt203|qvt203+|qume qvt 203 Plus,
1.11 millert 4868: dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>,
4869: ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~,
4870: kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
4871: kf9=\E[28~, rmir=\E[4l, smir=\E[4h,
4872: use=qvt103,
4873: qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video),
4874: cols#132, lines#24,
4875: rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203,
1.1 millert 4876: #
4877: # Since a command is present for enabling 25 data lines,
4878: # a specific terminfo entry may be generated for the 203.
4879: # If one is desired for the QVT 119 PLUS then 25 lines must
4880: # be selected in the status line (setup line 9).
4881: #
1.11 millert 4882: qvt203-25|QVT 203 PLUS with 25 by 80 column mode,
4883: cols#80, lines#25,
4884: is2=\E[=40h\E[?3l, use=qvt203,
4885: qvt203-25-w|QVT 203 PLUS with 25 by 132 columns,
4886: cols#132, lines#25,
4887: rs2=\E[?3h\E[=40h, use=qvt203,
1.1 millert 4888:
4889: #### Televideo (tvi)
4890: #
4891: # TeleVideo
4892: # 550 East Brokaw Road
4893: # PO Box 49048 95161
4894: # San Jose CA 95112
4895: # Vox: (408)-954-8333
4896: # Fax: (408)-954-0623
4897: #
4898: #
4899: # There are some tvi terminals that require incredible amounts of padding and
4900: # some that don't. I'm assuming tvi912 and tvi920 are the old slow ones, and
4901: # tvi912b, tvi912c, tvi920b, tvi920c are the new ones that don't need padding.
4902: #
4903: # All of these terminals (912 to 970 and the tvipt) are discontinued. Newer
4904: # Televideo terminals are ANSI and PC-ANSI compatible.
4905:
1.11 millert 4906: tvi803|televideo 803,
4907: clear=\E*$<10>, use=tvi950,
1.1 millert 4908:
4909: # Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86
4910: # Switch settings are:
4911: #
4912: # S1 1 2 3 4
4913: # D D D D 9600
4914: # D D D U 50
4915: # D D U D 75
4916: # D D U U 110
4917: # D U D D 135
4918: # D U D U 150
4919: # D U U D 300
4920: # D U U U 600
4921: # U D D D 1200
4922: # U D D U 1800
4923: # U D U D 2400
4924: # U D U U 3600
4925: # U U D D 4800
4926: # U U D U 7200
4927: # U U U D 9600
4928: # U U U U 19200
4929: #
4930: # S1 5 6 7 8
4931: # U D X D 7N1 (data bits, parity, stop bits) (X means ignored)
4932: # U D X U 7N2
4933: # U U D D 7O1
4934: # U U D U 7O2
4935: # U U U D 7E1
4936: # U U U U 7E2
4937: # D D X D 8N1
4938: # D D X U 8N2
4939: # D U D D 8O1
4940: # D U U U 8E2
4941: #
4942: # S1 9 Autowrap
4943: # U on
4944: # D off
4945: #
4946: # S1 10 CR/LF
4947: # U do CR/LF when CR received
4948: # D do CR when CR received
4949: #
4950: # S2 1 Mode
4951: # U block
4952: # D conversational
4953: #
4954: # S2 2 Duplex
4955: # U half
4956: # D full
4957: #
4958: # S2 3 Hertz
4959: # U 50
4960: # D 60
4961: #
4962: # S2 4 Edit mode
4963: # U local
4964: # D duplex
4965: #
4966: # S2 5 Cursor type
4967: # U underline
4968: # D block
4969: #
4970: # S2 6 Cursor down key
4971: # U send ^J
4972: # D send ^V
4973: #
4974: # S2 7 Screen colour
4975: # U green on black
4976: # D black on green
4977: #
4978: # S2 8 DSR status (pin 6)
4979: # U disconnected
4980: # D connected
4981: #
4982: # S2 9 DCD status (pin 8)
4983: # U disconnected
4984: # D duplex
4985: #
4986: # S2 10 DTR status (pin 20)
4987: # U disconnected
4988: # D duplex
4989: # (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>,
4990: # <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr)
4991: tvi910|televideo model 910,
1.11 millert 4992: OTbs, am, msgr,
1.1 millert 4993: cols#80, it#8, lines#24, xmc#1,
4994: bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
1.11 millert 4995: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
4996: home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I,
4997: if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H,
4998: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r,
4999: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
5000: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
5001: vpa=\E[%p1%{32}%+%c, use=adm+sgr,
1.1 millert 5002: # From: Alan R. Rogers <rogers%albany@csnet-relay>
5003: # as subsequently hacked over by someone at SCO
5004: # (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr)
5005: #
5006: # Here are the 910+'s DIP switches (U = up, D = down, X = don't care):
5007: #
5008: # S1 1 2 3 4:
5009: # D D D D 9600 D D D U 50 D D U D 75 D D U U 110
5010: # D U D D 135 D U D U 150 D U U D 300 D U U U 600
5011: # U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600
5012: # U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200
5013: #
5014: # S1 5 6 7 8:
5015: # U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2
5016: # U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2
5017: # D U D D 8O1 D U U U 8E2
5018: #
5019: # S1 9 Autowrap (U = on, D = off)
5020: # S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received)
5021: # S2 1 Mode (U = block, D = conversational)
5022: # S2 2 Duplex (U = half, D = full)
5023: # S2 3 Hertz (U = 50, D = 60)
5024: # S2 4 Edit mode (U = local, D = duplex)
5025: # S2 5 Cursor type (U = underline, D = block)
5026: # S2 6 Cursor down key (U = send ^J, D = send ^V)
5027: # S2 7 Screen colour (U = green on black, D = black on green)
5028: # S2 8 DSR status (pin 6) (U = disconnected, D = connected)
5029: # S2 9 DCD status (pin 8) (U = disconnected, D = connected)
5030: # S2 10 DTR status (pin 20) (U = disconnected, D = connected)
5031: #
5032: tvi910+|televideo 910+,
1.11 millert 5033: dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>,
5034: kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r,
5035: kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r,
5036: ll=\E=7\s,
5037: use=tvi910,
1.1 millert 5038:
5039: # (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and
5040: # <khome> from BRL entry -- esr)
5041: tvi912|tvi914|tvi920|old televideo 912/914/920,
5042: OTbs, OTpt, am, msgr,
1.11 millert 5043: cols#80, it#8, lines#24, xmc#1,
1.1 millert 5044: bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5045: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 5046: dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^,
5047: ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt,
5048: il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
5049: kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
5050: kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
5051: kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El,
5052: tbc=\E3,
1.1 millert 5053: # the 912 has a <funct> key that's like shift: <funct>8 xmits "^A8\r".
5054: # The 920 has this plus real function keys that xmit different things.
5055: # Terminfo makes you use the funct key on the 912 but the real keys on the 920.
5056: tvi912c|tvi912b|new televideo 912,
1.11 millert 5057: dl1=\ER$<5*>, il1=\EE$<5*>, use=tvi912,
1.1 millert 5058: # set to page 1 when entering curses application (\E-17 )
5059: # reset to page 0 when exiting curses application (\E-07 )
5060: tvi912-2p|tvi920-2p|tvi-2p|televideo w/2 pages,
1.11 millert 5061: rmcup=\E-07\s, smcup=\E-17\s, use=tvi912,
1.1 millert 5062: # We got some new tvi912c terminals that act really weird on the regular
5063: # termcap, so one of our gurus worked this up. Seems that cursor
5064: # addressing is broken.
1.11 millert 5065: tvi912cc|tvi912 at cowell college,
5066: cup@, use=tvi912c,
1.1 millert 5067:
5068: # Here are the switch settings for the tvi920c:
5069: #
5070: # S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down:
5071: # 2: 9600 3: 4800 4: 2400 5: 1200
5072: # 6: 600 7: 300 8: 150 9: 75
5073: # 10: 110
5074: #
5075: # S2 UART/Terminal options:
5076: # Up Down
5077: # 1: Not used Not allowed
5078: # 2: Alternate character set Standard character set
5079: # 3: Full duplex Half duplex
5080: # 4: 50 Hz refresh 60 Hz refresh
5081: # 5: No parity Send parity
5082: # 6: 2 stop bits 1 stop bit
5083: # 7: 8 data bits 7 data bits
5084: # 8: Not used Not allowed on Rev E or lower
5085: # 9: Even parity Odd parity
5086: # 10: Steady cursor Blinking cursor
5087: # (On Rev E or lower, use W25 instead of switch 10.)
5088: #
5089: # S5 UART/Terminal options:
5090: # Open Closed
5091: # 1: P3-6 Not connected DSR received on P3-6
5092: # 2: P3-8 Not connected DCD received on P3-8
5093: #
5094: # 3 Open, 4 Open: P3-20 Not connected
5095: # 3 Open, 4 Closed: DTR on when terminal is on
5096: # 3 Closed, 4 Open: DTR is connected to RTS
5097: # 3 Closed, 4 Closed: Not allowed
5098: #
5099: # 5 Closed: HDX printer (hardware control) Rev. K with extension port off,
5100: # all data transmitted out of the modem port (P3) will also be
5101: # transmitted out of the printer port (P4).
5102: #
5103: # 6 Open, 7 Open: Not allowed
5104: # 6 Open, 7 Closed: 20ma current loop input
5105: # 6 Closed, 7 Open: RS232 input
5106: # 6 Closed, 7 Closed: Not allowed
5107: #
5108: # Jumper options:
5109: # If the jumper is installed, the effect will occur (the next time the terminal
5110: # is switched on).
5111: #
5112: # S4/W31: Enables automatic LF upon receipt of CR from
5113: # remote or keyboard.
5114: # S4/W32: Enables transmission of EOT at the end of Send. If not
5115: # installed, a carriage return is sent.
5116: # S4/W33: Disables automatic carriage return in column 80.
5117: # S4/W34: Selects Page Print Mode as initial condition. If not
5118: # installed, Extension Mode is selected.
5119: #
5120: tvi920b|tvi920c|new televideo 920,
5121: dl1=\ER$<5*>, il1=\EE$<5*>, kf0=^AI\r, kf1=^A@\r,
1.11 millert 5122: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
5123: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
5124: use=tvi912,
1.1 millert 5125:
5126: # Televideo 921 and variants
5127: # From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995
5128: # (tvi921: removed :ko=bt: before translation, I see no backtab cap;
5129: # also added empty <acsc> to suppress tic warning -- esr)
5130: tvi921|televideo model 921 with sysline same as page & real vi function,
5131: OTbs, OTpt, am, hs, xenl, xhp,
5132: cols#80, lines#24, xmc#0,
1.11 millert 5133: acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
5134: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
5135: cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
5136: el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
5137: if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@,
5138: is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H,
5139: kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>,
5140: ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%,
1.1 millert 5141: rmir=, smacs=\E$, smir=, tsl=\Ef\EG0,
1.11 millert 5142: use=adm+sgr,
1.1 millert 5143: # without the beeper
5144: # (tvi92B: removed :ko=bt: before translation, I see no backtab cap;
5145: # also added empty <acsc> to suppress tic warning -- esr)
5146: tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper,
5147: am, hs, xenl, xhp,
5148: cols#80, lines#24, xmc#0,
1.11 millert 5149: acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L,
5150: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K,
5151: cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY,
5152: el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I,
5153: ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
5154: invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z,
1.1 millert 5155: kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
1.11 millert 5156: kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE,
5157: nel=^M^J, rmacs=\E%, smacs=\E$, tsl=\Ef\EG0,
5158: use=adm+sgr,
1.1 millert 5159: # (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr)
5160: tvi92D|tvi92B with DTR instead of XON/XOFF & better padding,
5161: dl1=\ER$<2*/>, il1=\EE$<2*/>,
5162: is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>,
5163: kil1=\EE$<2*/>,
1.11 millert 5164: use=tvi92B,
1.1 millert 5165:
5166: # (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings
5167: # in from a BSD termcap file because it looks like they do something the
5168: # old ones skip -- esr)
5169: tvi924|televideo tvi924,
5170: am, bw, hs, in, mir, msgr, xenl, xon,
5171: cols#80, it#8, lines#24, wsl#80, xmc#0,
1.11 millert 5172: bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0,
5173: cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c,
5174: cub1=^H, cud1=^V, cuf1=^L,
5175: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1,
5176: dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et,
5177: flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1,
5178: ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J,
5179: invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0,
5180: kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
5181: kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r,
5182: kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r,
5183: kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r,
5184: kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^,
5185: kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4,
5186: lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10,
5187: pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, use=adm+sgr,
1.1 millert 5188:
5189: # TVI925 DIP switches. In each of these, D = Down and U = Up,
5190: #
5191: # Here are the settings for the external (baud) switches (S1):
5192: #
5193: # Position Baud
5194: # 7 8 9 10 [Printer]
5195: # 1 2 3 4 [Main RS232]
5196: # -----------------------------------------------------
5197: # D D D D 9600
5198: # D D D U 50
5199: # D D U D 75
5200: # D D U U 110
5201: # D U D D 135
5202: # D U D U 150
5203: # D U U D 300
5204: # D U U U 600
5205: # U D D D 1200
5206: # U D D U 1800
5207: # U D U D 2400
5208: # U D U U 3600
5209: # U U D D 4800
5210: # U U D U 7200
5211: # U U U D 9600
5212: # U U U U 19200
5213: #
5214: #
5215: # Settings for word length and stop-bits (S1)
5216: #
5217: # Position Description
5218: # 5 6
5219: # ---------------------------
5220: # U - 7-bit word
5221: # D - 8-bit word
5222: # - U 2 stop bits
5223: # - D 1 stop bit
5224: #
5225: #
5226: # S2 (external) settings
5227: #
5228: # Position Up Dn Description
5229: # --------------------------------------------
5230: # 1 X Local edit
5231: # X Duplex edit (transmit editing keys)
5232: # --------------------------------------------
5233: # 2 X 912/920 emulation
5234: # X 925
5235: # --------------------------------------------
5236: # 3 X
5237: # 4 X No parity
5238: # 5 X
5239: # --------------------------------------------
5240: # 3 X
5241: # 4 X Odd parity
5242: # 5 X
5243: # --------------------------------------------
5244: # 3 X
5245: # 4 X Even parity
5246: # 5 X
5247: # --------------------------------------------
5248: # 3 X
5249: # 4 X Mark parity
5250: # 5 X
5251: # --------------------------------------------
5252: # 3 X
5253: # 4 X Space parity
5254: # 5 X
5255: # --------------------------------------------
5256: # 6 X White on black display
5257: # X Black on white display
5258: # --------------------------------------------
5259: # 7 X Half Duplex
5260: # 8 X
5261: # --------------------------------------------
5262: # 7 X Full Duplex
5263: # 8 X
5264: # --------------------------------------------
5265: # 7 X Block mode
5266: # 8 X
5267: # --------------------------------------------
5268: # 9 X 50 Hz
5269: # X 60 Hz
5270: # --------------------------------------------
5271: # 10 X CR/LF (Auto LF)
5272: # X CR only
5273: #
5274: # S3 (internal switch) settings:
5275: #
5276: # Position Up Dn Description
5277: # --------------------------------------------
5278: # 1 X Keyclick off
5279: # X Keyclick on
5280: # --------------------------------------------
5281: # 2 X English
5282: # 3 X
5283: # --------------------------------------------
5284: # 2 X German
5285: # 3 X
5286: # --------------------------------------------
5287: # 2 X French
5288: # 3 X
5289: # --------------------------------------------
5290: # 2 X Spanish
5291: # 3 X
5292: # --------------------------------------------
5293: # 4 X Blinking block cursor
5294: # 5 X
5295: # --------------------------------------------
5296: # 4 X Blinking underline cursor
5297: # 5 X
5298: # --------------------------------------------
5299: # 4 X Steady block cursor
5300: # 5 X
5301: # --------------------------------------------
5302: # 4 X Steady underline cursor
5303: # 5 X
5304: # --------------------------------------------
5305: # 6 X Screen blanking timer (ON)
5306: # X Screen blanking timer (OFF)
5307: # --------------------------------------------
5308: # 7 X Page attributes
5309: # X Line attributes
5310: # --------------------------------------------
5311: # 8 X DCD disconnected
5312: # X DCD connected
5313: # --------------------------------------------
5314: # 9 X DSR disconnected
5315: # X DSR connected
5316: # --------------------------------------------
5317: # 10 X DTR Disconnected
5318: # X DTR connected
5319: # --------------------------------------------
5320: #
5321: # (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr)
5322: tvi925|televideo 925,
1.11 millert 5323: OTbs, am, bw, hs, ul,
1.1 millert 5324: cols#80, lines#24, xmc#1,
1.11 millert 5325: bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V,
5326: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
5327: cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET,
5328: flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1,
5329: ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z,
5330: kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
5331: ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r,
5332: kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r,
5333: kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3,
5334: tsl=\Eh\Ef,
5335: use=adm+sgr,
1.1 millert 5336: # TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL
5337: # to avoid "magic cookie" standout glitch:
5338: tvi925-hi|TeleVideo Model 925 with half intensity standout mode,
5339: xmc@,
5340: kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925,
5341:
5342: # From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993
5343: # Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82
5344: # for additional capabilities,
5345: # The following tvi descriptions from B:pjphar and virus!mike
5346: # is for all 950s. It sets the following attributes:
5347: # full duplex (\EDF) write protect off (\E()
5348: # conversation mode (\EC) graphics mode off (\E%)
5349: # white on black (\Ed) auto page flip off (\Ew)
5350: # turn off status line (\Eg) clear status line (\Ef\r)
5351: # normal video (\E0) monitor mode off (\EX or \Eu)
5352: # edit mode (\Er) load blank char to space (\Ee\040)
5353: # line edit mode (\EO) enable buffer control (^O)
5354: # protect mode off (\E\047) duplex edit keys (\El)
5355: # program unshifted send key to send line all (\E016)
5356: # program shifted send key to send line unprotected (\E004)
5357: # set the following to nulls:
5358: # field delimiter (\Ex0\200\200)
5359: # line delimiter (\Ex1\200\200)
5360: # start-protected field delimiter (\Ex2\200\200)
5361: # end-protected field delimiter (\Ex3\200\200)
5362: # set end of text delimiter to carriage return/null (\Ex4\r\200)
5363: #
5364: # TVI 950 Switch Setting Reference Charts
5365: #
5366: # TABLE 1:
5367: #
5368: # S1 1 2 3 4 5 6 7 8 9 10
5369: # +-----------------------+-----+-----+-----------------------+
5370: # | Computer Baud Rate |Data |Stop | Printer Baud Rate |
5371: # | |Bits |Bits | |
5372: # +------+-----------------------+-----+-----+-----------------------+
5373: # | Up | See | 7 | 2 | See |
5374: # +------+-----------------------+-----+-----+-----------------------+
5375: # | Down | TABLE 2 | 8 | 1 | TABLE 2 |
5376: # +------+-----------------------+-----+-----+-----------------------+
5377: #
5378: #
5379: # S2 1 2 3 4 5 6 7 8 9 10
5380: # +-----+-----+-----------------+-----+-----------+-----+-----+
5381: # |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click|
5382: # +------+-----+-----+-----------------+-----+-----------+-----+-----+
5383: # | Up | Dplx|Blink| See |GonBk| See | 60 | Off |
5384: # +------+-----+-----+-----------------+-----+-----------+-----+-----+
5385: # | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On |
5386: # +------+-----+-----+-----------------+-----+-----------+-----+-----+
5387: #
5388: # TABLE 2:
5389: #
5390: # +-----------+-----+-----+-----+-----+-----------+
5391: # | Display | 1 | 2 | 3 | 4 | Baud |
5392: # +-----------+-----+-----+-----+-----+ |
5393: # | Printer | 7 | 8 | 9 | 10 | Rate |
5394: # +-----------+-----+-----+-----+-----+-----------+
5395: # | D | D | D | D | 9600 |
5396: # | U | D | D | D | 50 |
5397: # | D | U | D | D | 75 |
5398: # | U | U | D | D | 110 |
5399: # | D | D | U | D | 135 |
5400: # | U | D | U | D | 150 |
5401: # | D | U | U | D | 300 |
5402: # | U | U | U | D | 600 |
5403: # | D | D | D | U | 1200 |
5404: # | U | D | D | U | 1800 |
5405: # | D | U | D | U | 2400 |
5406: # | U | U | D | U | 3600 |
5407: # | D | D | U | U | 4800 |
5408: # | U | D | U | U | 7200 |
5409: # | D | U | U | U | 9600 |
5410: # | U | U | U | U | 19200 |
5411: # +-----+-----+-----+-----+-----------+
5412: #
5413: # TABLE 3:
5414: # +-----+-----+-----+-----------+
5415: # | 3 | 4 | 5 | Parity |
5416: # +-----+-----+-----+-----------+
5417: # | X | X | D | None |
5418: # | D | D | U | Odd |
5419: # | D | U | U | Even |
5420: # | U | D | U | Mark |
5421: # | U | U | U | Space |
5422: # +-----+-----+-----+-----------+
5423: # X = don't care
5424: #
5425: # CHART:
5426: # +-----+-----+-----------------+
5427: # | 7 | 8 | Communication |
5428: # +-----+-----+-----------------+
5429: # | D | D | Half Duplex |
5430: # | D | U | Full Duplex |
5431: # | U | D | Block |
5432: # | U | U | Local |
5433: # +-----+-----+-----------------+
5434: #
5435: # (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:".
5436: # I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich>
5437: # should be present and all tvi native modes use the same string for this.
5438: # Finally, note that BSD has cud1=^V. -- esr)
1.11 millert 5439: tvi950|televideo 950,
5440: OTbs, am, hs, mir, msgr, xenl, xon,
5441: cols#80, it#8, lines#24, xmc#1,
5442: acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*,
5443: cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5444: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
5445: dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed,
5446: fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J,
5447: invis@,
5448: is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r,
5449: kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L,
5450: kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r,
5451: kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
5452: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
5453: kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X,
5454: rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
5455: use=adm+sgr,
1.1 millert 5456: #
5457: # is for 950 with two pages adds the following:
5458: # set 48 line page (\E\\2)
5459: # place cursor at page 0, line 24, column 1 (\E-07 )
5460: # set local (no send) edit keys (\Ek)
5461: #
5462: # two page 950 adds the following:
5463: # when entering ex, set 24 line page (\E\\1)
5464: # when exiting ex, reset 48 line page (\E\\2)
5465: # place cursor at 0,24,1 (\E-07 )
5466: # set duplex (send) edit keys (\El) when entering vi
5467: # set local (no send) edit keys (\Ek) when exiting vi
5468: #
1.11 millert 5469: tvi950-2p|televideo950 w/2 pages,
5470: is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011,
5471: rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
5472: smkx=\El,
5473: use=tvi950,
1.1 millert 5474: #
5475: # is for 950 with four pages adds the following:
5476: # set 96 line page (\E\\3)
5477: # place cursor at page 0, line 24, column 1 (\E-07 )
5478: #
5479: # four page 950 adds the following:
5480: # when entering ex, set 24 line page (\E\\1)
5481: # when exiting ex, reset 96 line page (\E\\3)
5482: # place cursor at 0,24,1 (\E-07 )
5483: #
1.11 millert 5484: tvi950-4p|televideo950 w/4 pages,
5485: is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011,
5486: rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
5487: smkx=\El,
5488: use=tvi950,
1.1 millert 5489: #
5490: # <is2> for reverse video 950 changes the following:
5491: # set reverse video (\Ed)
5492: #
5493: # set vb accordingly (\Ed ...delay... \Eb)
5494: #
1.11 millert 5495: tvi950-rv|televideo950 rev video,
5496: flash=\Ed$<200/>\Eb,
5497: is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0, use=tvi950,
1.1 millert 5498:
5499: # tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv
1.11 millert 5500: tvi950-rv-2p|televideo950 rev video w/2 pages,
5501: flash=\Ed$<200/>\Eb,
5502: is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s,
5503: rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
5504: smkx=\El,
5505: use=tvi950,
1.1 millert 5506:
5507: # tvi950-rv uses the appropriate entries from 950-4p and 950-rv
1.11 millert 5508: tvi950-rv-4p|televideo950 rev video w/4 pages,
5509: flash=\Ed$<200/>\Eb,
5510: is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s,
5511: rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s,
5512: smkx=\El,
5513: use=tvi950,
1.1 millert 5514: # From: Andreas Stolcke <stolcke@icsi.berkeley.edu>
5515: # (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H";
5516: # removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in
5517: # the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note
5518: # the :ko: string had :cl: in it, which means that one of the original
5519: # <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what
5520: # the 950 has. Finally, corrected the <kel> string to match the 950 and what
5521: # ko implies -- esr)
5522: # If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would
5523: # also work.
5524: tvi955|televideo 955,
1.11 millert 5525: OTbs, mc5i, msgr@,
1.1 millert 5526: it#8, xmc@,
1.11 millert 5527: acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2,
5528: civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH,
1.1 millert 5529: cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1,
1.11 millert 5530: is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1,
5531: knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%,
5532: rmam=\E[=7l, rmxon=^N,
1.1 millert 5533: rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r,
5534: sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O,
1.11 millert 5535: use=tvi950,
1.1 millert 5536: tvi955-w|955-w|televideo955 w/132 cols,
5537: cols#132,
1.11 millert 5538: is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955,
1.1 millert 5539: # use half-intensity as normal mode, full intensity as <bold>
5540: tvi955-hb|955-hb|televideo955 half-bright,
1.11 millert 5541: bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El,
5542: sgr0=\EG0\E[=5h,
5543: use=tvi955,
1.1 millert 5544: # From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin
5545: # (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m;
5546: # added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL.
5547: # According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what
5548: # it does to the function keys. I deduced <rmam>/<smam>.
5549: # also added empty <acsc> to suppress tic warning, -- esr)
5550: tvi970|televideo 970,
5551: OTbs, OTpt, am, da, db, mir, msgr,
5552: cols#80, it#8, lines#24,
1.11 millert 5553: acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr,
5554: cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
5555: cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r,
5556: ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H,
5557: hpa=\E[%i%p1%dG, ht=^I, il1=\E[L,
5558: is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J,
5559: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5560: kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f,
5561: kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B,
5562: rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m,
5563: sgr0=\E[m, smacs=\E(B, smam=\E[?7l,
5564: smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m,
5565: smul=\E[4m, vpa=\E[%i%p1%dd,
1.1 millert 5566: tvi970-vb|televideo 970 with visual bell,
1.11 millert 5567: flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, use=tvi970,
1.1 millert 5568: tvi970-2p|televideo 970 with using 2 pages of memory,
1.11 millert 5569: rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q,
1.1 millert 5570: use=tvi970,
5571: # Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars
5572: # per line (rather than 40), Esc K chooses the normal character set. Not sure
5573: # padding is needed, but adapted from the tvi920c termcap. The <smso> and
5574: # <smul> strings are klutzy, but at least use no screen space.
5575: # (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>,
5576: # its absence means <smam>=\Ev isn't safe to use. -- esr)
5577: # From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84.
5578: # The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says:
5579: # F1 and F2 should be programmed as ^A and ^B; required for UNIFY.
5580: tvipt|televideo personal terminal,
5581: OTbs, am,
5582: cols#80, lines#24,
5583: cbt=\EI, clear=^Z, cub1=^H, cuf1=^L,
1.11 millert 5584: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>,
5585: ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt,
5586: il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J,
5587: kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R,
5588: rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH,
1.1 millert 5589: # From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996
1.11 millert 5590: tvi9065|televideo 9065,
5591: am, bw, chts, hs, mc5i, mir, msgr, xenl, xon,
5592: cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0,
5593: wnum#0, wsl#30,
5594: acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G,
5595: blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z,
5596: cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD,
5597: cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L,
5598: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA,
5599: cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp,
5600: dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY,
5601: el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1,
5602: ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt,
5603: il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1,
5604: ip=$<3>,
5605: is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er,
5606: is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s,
5607: kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K,
5608: kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r,
5609: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
5610: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H,
5611: mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J,
5612: pfkey=\E|%p1%{48}%+%c3%p2%s\031,
5613: pfloc=\E|%p1%{48}%+%c2%p2%s\031,
5614: pfx=\E|%p1%{48}%+%c1%p2%s\031,
5615: pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&,
5616: rep=\E[%p2%db%p1%c, rev=\EG4,
5617: rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT,
5618: rmacs=\E%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H,
5619: rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0,
5620: rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l,
5621: rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1,
5622: rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0,
5623: sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p9%t\E$%e\E%%%;,
5624: sgr0=\EG0, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er,
5625: smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O,
5626: tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0,
1.1 millert 5627:
5628: #### Visual (vi)
5629: #
5630: # In September 1993, Visual Technology of Westboro, Massachusetts,
5631: # merged with White Pine Software of Nashua, New Hampshire.
5632: #
5633: # White Pine Software may be contacted at +1 603/886-9050.
5634: # Or visit White Pine on the World Wide Web at URL http://www.wpine.com.
5635: #
5636:
5637: # Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs>
5638: # Recently I hacked together the following termcap for Visual
5639: # Technology's Visual 50 terminal. It's a slight modification of
5640: # the vt52 termcap.
5641: # It's intended to run when the Visual 50 is in vt52 emulation mode
5642: # (I know what you're thinking; if it's emulating a vt52, then why
5643: # another termcap? Well, it turns out that the Visual 50 can handle
5644: # <dl1> and db(?) among other things, which the vt52 can't)
5645: # The termcap works OK for the most part. The only problem is on
5646: # character inserts. The whole line gets painfully redrawn for each
5647: # character typed. Any suggestions?
5648: # Beau's entry is combined with the vi50 entry from University of Wisconsin.
5649: # Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in
5650: # disguise; <kf7>-<kf9> are really l1-l3.
5651: vi50|visual 50,
5652: OTbs, OTpt, am, da, db, msgr,
5653: cols#80, it#8, lines#24,
1.11 millert 5654: OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H,
5655: cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
5656: cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH,
5657: ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB,
5658: kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV,
5659: kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH,
5660: nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES,
1.1 millert 5661: # this one was BSD & SCO's vi50
5662: vi50adm|visual 50 in adm3a mode,
5663: am, msgr,
5664: cols#80, it#8, lines#24,
5665: bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5666: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM,
5667: ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H,
1.11 millert 5668: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH,
5669: rmso=\ET, smso=\EU,
1.14 millert 5670: # From: Jeff Siegal <jbs@quiotix.com>
1.1 millert 5671: vi55|Visual 55,
1.11 millert 5672: OTbs, am, mir, msgr,
1.1 millert 5673: cols#80, it#8, lines#24,
1.11 millert 5674: clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H,
1.1 millert 5675: cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
1.11 millert 5676: cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I,
5677: il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED,
5678: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET,
5679: smir=\Ea, smso=\EU,
1.1 millert 5680:
5681: # Visual 200 from BRL
5682: # The following switch settings are assumed for normal operation:
5683: # FULL_DUPLEX SCROLL CR
5684: # AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE
5685: # Other switches may be set for operator convenience or communication
5686: # requirements.
5687: # Character insertion is kludged in order to get around the "beep" misfeature.
5688: # (This cap is commented out because <smir>/<rmir> is more efficient -- esr)
5689: # Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>,
5690: # and <dl1> strings, but we seem to get along fine without them.
5691: vi200|visual 200,
5692: OTbs, OTpt, am, mir, msgr,
5693: OTkn#10, cols#80, it#8, lines#24,
5694: acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H,
5695: cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
5696: cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey,
1.11 millert 5697: el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea,
5698: kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
5699: kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p,
5700: kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v,
5701: kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei,
5702: kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI,
5703: rmacs=\EG, rmkx=\E>, rmso=\E3,
5704: rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF,
5705: smkx=\E=, smso=\E4, tbc=\Eg,
1.1 millert 5706: # The older Visuals didn't come with function keys. This entry uses
5707: # <smkx> and <rmkx> so that the keypad keys can be used as function keys.
5708: # If your version of vi doesn't support function keys you may want
5709: # to use vi200-f.
5710: vi200-f|visual 200 no function keys,
5711: is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q,
1.11 millert 5712: kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w,
5713: kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@,
5714: use=vi200,
1.1 millert 5715: vi200-rv|visual 200 reverse video,
1.11 millert 5716: cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200,
1.1 millert 5717:
5718: # the function keys are programmable but we don't reprogram them to their
5719: # default values with <is2> because programming them is very verbose. maybe
5720: # an initialization file should be made for the 300 and they could be stuck
5721: # in it.
5722: # (vi300: added <rmam>/<smam> based on init string -- esr)
1.11 millert 5723: vi300|visual 300 ansi x3.64,
5724: am, bw, mir, xenl,
5725: cols#80, lines#24,
5726: bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
5727: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
5728: dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
5729: il1=\E[L, ind=^J,
5730: is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s,
5731: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
5732: kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\,
5733: kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\,
5734: kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l,
5735: rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
5736: smso=\E[1m, smul=\E[4m,
1.1 millert 5737: # some of the vi300s have older firmware that has the command
5738: # sequence for setting editing extent reversed.
1.11 millert 5739: vi300-old|visual 300 with old firmware (set edit extent reversed),
5740: is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s,
5741: use=vi300,
1.1 millert 5742:
5743: # Visual 500 prototype entry from University of Wisconsin.
5744: # The best place to look for the escape sequences is page A1-1 of the
5745: # Visual 500 manual. The initialization sequence given here may be
5746: # overkill, but it does leave out some of the initializations which can
5747: # be done with the menus in set-up mode.
5748: # The :xp: line below is so that emacs can understand the padding requirements
5749: # of this slow terminal. :xp: is 10 time the padding factor.
5750: # (vi500: removed unknown :xp#4: termcap;
5751: # also added empty <acsc> to suppress tic warning -- esr)
5752: vi500|visual 500,
5753: am, mir, msgr,
5754: cols#80, it#8, lines#33,
5755: acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M,
5756: csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB,
1.11 millert 5757: cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
5758: dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>,
5759: el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>,
5760: ind=^J,
1.1 millert 5761: is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\,
5762: kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
5763: khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G,
1.11 millert 5764: rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D,
1.1 millert 5765:
5766: # The visual 550 is a visual 300 with tektronix graphics,
5767: # and with 33 lines. clear screen is modified here to
5768: # also clear the graphics.
1.11 millert 5769: vi550|visual 550 ansi x3.64,
5770: lines#33,
5771: clear=\030\E[H\E[2J, use=vi300,
1.1 millert 5772:
5773: vi603|visual603|visual 603,
5774: hs, mir,
1.11 millert 5775: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
5776: csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C,
5777: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
5778: dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L,
5779: ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r,
5780: rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
5781: sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~,
5782: use=vt100,
1.1 millert 5783:
5784: #### Wyse (wy)
5785: #
5786: # Wyse Technology
5787: # 3471 North First Street
5788: # San Jose, CA 95134
5789: # Vox: (408)-473-1200
5790: # Fax: (408) 473-1222
5791: # Web: http://www.wyse.com
5792: #
5793: # Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at
5794: # (800)-800-WYSE (option 5 gets you a human). There's a Web page at the
5795: # obvious address, <http://www.wyse.com>. They keep terminfo entries at
5796: # <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>.
5797: #
5798: # Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995.
5799: # They now own the Qume and Amdek brands, too. So these are the people to
5800: # talk with about all Link, Qume, and Amdek terminals.
5801: #
5802: # These entries include a few small fixes.
5803: # I canceled the bel capacities in the vb entries.
5804: # I made two trivial syntax fixes in the wyse30 entry.
5805: # I made some entries relative to adm+sgr.
5806: #
5807: #
5808: # Note: The wyse75, wyse85, and wyse99 have been discontinued.
5809:
5810: # Although the Wyse 30 can support more than one attribute
5811: # it requires magic cookies to do so. Many applications do not
5812: # function well with magic cookies. The following terminfo uses
5813: # the protect mode to support one attribute (dim) without cookies.
5814: # If more than one attribute is needed then the wy30-mc terminfo
5815: # should be used.
5816: #
5817: wy30|wyse30|Wyse 30,
5818: am, bw, hs, mc5i, mir, msgr, xon,
5819: cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
5820: acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
5821: civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H,
5822: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
5823: cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>,
5824: dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9,
5825: fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>,
5826: ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024,
5827: kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
5828: kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7,
5829: kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
5830: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ,
5831: kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T,
1.11 millert 5832: mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177,
5833: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>,
1.1 millert 5834: rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
5835: sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
5836: sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
5837: smso=\E`7\E), tbc=\E0, tsl=\EF,
5838: #
5839: # This terminal description uses the non-hidden attribute mode
5840: # (with magic cookie).
5841: #
5842: # (wy30-mc: added <smcup> to suppress tic warning --esr)
5843: wy30-mc|wyse30-mc|wyse 30 with magic cookies,
5844: msgr@,
5845: ma@, xmc#1,
5846: blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003,
5847: rmcup=\EG0, rmso=\EG0,
1.11 millert 5848: sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
1.1 millert 5849: sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
5850: smso=\EG4, use=wy30,
5851: use=adm+sgr,
5852: # The mandatory pause used by <flash> does not work with
5853: # older versions of terminfo. If you see this effect then
5854: # unset xon and delete the / from the delay.
5855: # i.e. change $<100/> to $<100>
5856: wy30-vb|wyse30-vb|wyse 30 visible bell,
5857: bel@, use=wy30,
5858: #
5859: # The Wyse 50 can support one attribute (e.g. Dim, Inverse,
5860: # Normal) without magic cookies by using the protect mode.
5861: # The following description uses this feature, but when more
5862: # than one attribute is put on the screen at once, all attributes
5863: # will be changed to be the same as the last attribute given.
5864: # The Wyse 50 can support more attributes when used with magic
5865: # cookies. The wy50-mc terminal description uses magic cookies
5866: # to correctly handle multiple attributes on a screen.
5867: #
5868: wy50|wyse50|Wyse 50,
5869: am, bw, hs, mc5i, mir, msgr, xon,
5870: cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45,
5871: acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI,
5872: civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H,
5873: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
5874: cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r,
5875: ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
5876: home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>,
5877: is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H,
5878: kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW,
5879: kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
5880: kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
5881: kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
5882: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
5883: kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
5884: ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J,
1.11 millert 5885: pfx=\Ez%p1%{63}%+%c%p2%s\177,
5886: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E),
1.1 millert 5887: ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(,
5888: sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
5889: sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10,
5890: smso=\E`6\E), tbc=\E0, tsl=\EF,
5891: #
5892: # This terminal description uses the non-hidden attribute mode
5893: # (with magic cookie).
5894: #
5895: # The mandatory pause used by flash does not work with some
5896: # older versions of terminfo. If you see this effect then
5897: # unset <xon> and delete the / from the delay.
5898: # i.e. change $<100/> to $<100>
5899: # (wy50-mc: added <smcup> to suppress tic warning --esr)
5900: wy50-mc|wyse50-mc|wyse 50 with magic cookies,
5901: msgr@,
5902: ma@, xmc#1,
5903: blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4,
5904: rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0,
1.11 millert 5905: sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
1.1 millert 5906: sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=,
5907: smso=\EGt, use=wy50,
5908: use=adm+sgr,
5909: wy50-vb|wyse50-vb|wyse 50 visible bell,
5910: bel@, use=wy50,
5911: wy50-w|wyse50-w|wyse 50 132-column,
5912: cols#132, lw#7, nlab#16, wsl#97,
5913: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy50,
5914: wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell,
5915: bel@,
5916: use=wy50-w,
1.11 millert 5917:
1.1 millert 5918: #
5919: # The Wyse 350 is a Wyse 50 with color.
5920: # Unfortunately this means that it has magic cookies.
5921: # The color attributes are designed to overlap the reverse, dim and
5922: # underline attributes. This is nice for monochrome applications
5923: # because you can make underline stuff green (or any other color)
5924: # but for true color applications it's not so hot because you cannot
5925: # mix color with reverse, dim or underline.
5926: # To further complicate things one of the attributes must be
5927: # black (either the foreground or the background). In reverse video
5928: # the background changes color with black letters. In normal video
5929: # the foreground changes colors on a black background.
5930: # This terminfo uses some of the more advanced features of curses
5931: # to display both color and blink. In the final analysis I am not
5932: # sure that the wy350 runs better with this terminfo than it does
5933: # with the wy50 terminfo (with user adjusted colors).
5934: #
5935: # The mandatory pause used by flash does not work with
5936: # older versions of terminfo. If you see this effect then
5937: # unset xon and delete the / from the delay.
5938: # i.e. change $<100/> to $<100>
5939: #
5940: # Bug: The <op> capability resets attributes.
5941: wy350|wyse350|Wyse 350,
5942: am, bw, hs, mc5i, mir, xon,
5943: colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8,
5944: wsl#45, xmc#1,
5945: acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
5946: cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
5947: cub1=^H, cud1=^J, cuf1=^L,
5948: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>,
5949: dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET,
5950: flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
5951: il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>,
5952: is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI,
5953: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER,
5954: ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r,
5955: kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
5956: kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
5957: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
5958: kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
5959: ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0,
1.11 millert 5960: pfx=\Ez%p1%{63}%+%c%p2%s\177,
5961: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej,
1.1 millert 5962: rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=,
1.11 millert 5963: setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c,
5964: sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;,
1.1 millert 5965: sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002,
5966: smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF,
5967: use=adm+sgr,
5968: wy350-vb|wyse350-vb|wyse 350 visible bell,
5969: bel@, use=wy350,
5970: wy350-w|wyse350-w|wyse 350 132-column,
5971: cols#132, lw#7, nlab#16, wsl#97,
5972: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, use=wy350,
5973: wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell,
5974: bel@,
5975: use=wy350-w,
5976: #
5977: # This terminfo description is untested.
5978: # The wyse100 emulates an adm31, so the adm31 entry should work.
5979: #
5980: wy100|wyse 100,
5981: hs, mir,
5982: cols#80, lines#24, xmc#1,
5983: bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
5984: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
5985: dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J,
5986: invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
5987: kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r,
5988: kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{,
5989: rmir=\Er, smir=\Eq, tsl=\EF,
5990: use=adm+sgr,
5991: #
5992: # The Wyse 120/150 has most of the features of the Wyse 60.
5993: # This terminal does not need padding up to 9600 baud!
5994: # <msgr> should be set but the clear screen fails when in
5995: # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
5996: # then set <msgr>.
5997: #
5998: wy120|wyse120|wy150|wyse150|Wyse 120/150,
5999: am, bw, hs, km, mc5i, mir, msgr, xon,
6000: cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
6001: acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
6002: bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
6003: cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6004: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
6005: dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
6006: flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>,
6007: hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
6008: is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
6009: is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
6010: kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
6011: kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
6012: kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
6013: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6014: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
6015: kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
6016: mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
1.11 millert 6017: pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
6018: pfx=\EZ1%p1%{63}%+%c%p2%s\177,
6019: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
1.1 millert 6020: rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11,
6021: rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
6022: rs3=\EwG\Ee($<100>,
1.11 millert 6023: sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
1.1 millert 6024: sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
6025: smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
6026: tbc=\E0, tsl=\EF,
6027: use=adm+sgr,
6028: #
6029: wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column,
6030: cols#132, lw#7, nlab#16, wsl#97,
6031: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
6032: rs2=\E`;$<70>, use=wy120,
6033: #
6034: wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines,
6035: lh@, lines#25, lw@, nlab@,
6036: pln@, rs3=\EwG\Ee)$<100>, use=wy120,
6037: #
6038: wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines,
6039: lh@, lines#25, lw@, nlab@,
6040: pln@, rs3=\EwG\Ee)$<100>, use=wy120-w,
6041: #
6042: wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell,
6043: bel@,
6044: use=wy120,
6045: #
6046: wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell,
6047: bel@,
6048: use=wy120-w,
6049: #
6050: # The Wyse 60 is like the Wyse 50 but with more padding.
6051: # The reset strings are slow and the pad times very depending
6052: # on other parameters such as font loading. I have tried
6053: # to follow the following outline:
6054: #
6055: # <rs1> -> set personality
6056: # <rs2> -> set number of columns
6057: # <rs3> -> set number of lines
6058: # <is1> -> select the proper font
6059: # <is2> -> do the initialization
6060: # <is3> -> set up display memory (2 pages)
6061: #
6062: # The Wyse 60's that have vt100 emulation are slower than the
6063: # older Wyse 60's. This change happened mid-1987.
6064: # The capabilities effected are <dch1> <dl1> <il1> <ind> <ri>
6065: #
6066: # The meta key is only half right. This terminal will return the
6067: # high order bit set when you hit CTRL-function_key
6068: #
6069: # It may be useful to assign two function keys with the
6070: # values \E=(\s look at old data in page 1
6071: # \E=W, look at bottom of page 1
6072: # where \s is a space ( ).
6073: #
6074: # Note:
6075: # The Wyse 60 runs faster when the XON/XOFF
6076: # handshake is turned off.
6077: #
6078: # (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid
6079: # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
6080: wy60|wyse60|Wyse 60,
6081: am, bw, hs, km, mc5i, mir, msgr,
6082: cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45,
6083: acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
6084: bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>,
6085: cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6086: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6087: dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r,
6088: ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M,
6089: home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>,
6090: ip=$<3>, is1=\EcB0\EcC1,
6091: is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
6092: is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
6093: kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
6094: kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
6095: kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
6096: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6097: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
6098: kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
6099: mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>,
1.11 millert 6100: pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
6101: pfx=\EZ1%p1%{63}%+%c%p2%s\177,
6102: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
1.1 millert 6103: rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er,
6104: rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>,
6105: rs2=\EeG$<150>, rs3=\EwG\Ee($<200>,
1.11 millert 6106: sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
1.1 millert 6107: sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
6108: smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
6109: tbc=\E0, tsl=\EF,
6110: use=adm+sgr,
6111: #
6112: wy60-w|wyse60-w|wyse 60 132-column,
6113: cols#132, lw#7, nlab#16, wsl#97,
6114: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>,
6115: rs2=\EeF$<150>\E`;$<150>, use=wy60,
6116: #
6117: wy60-25|wyse60-25|wyse 60 80-column 25-lines,
6118: lh@, lines#25, lw@, nlab@,
6119: pln@, rs3=\EwG\Ee)$<200>, use=wy60,
6120: wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines,
6121: lh@, lines#25, lw@, nlab@,
6122: pln@, rs3=\EwG\Ee)$<200>, use=wy60-w,
6123: #
6124: wy60-42|wyse60-42|wyse 60 80-column 42-lines,
6125: lines#42,
6126: clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>,
6127: dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>,
6128: ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>,
6129: ri=\Ej$<10>, rs3=\Ee*$<150>,
6130: use=wy60,
6131: wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines,
6132: cols#132, lw#7, nlab#16, wsl#97,
6133: clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>,
6134: dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>,
6135: nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>,
6136: use=wy60-42,
6137: #
6138: wy60-43|wyse60-43|wyse 60 80-column 43-lines,
6139: lh@, lines#43, lw@, nlab@,
6140: pln@, rs3=\Ee+$<150>, use=wy60-42,
6141: wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines,
6142: lh@, lines#43, lw@, nlab@,
6143: pln@, rs3=\Ee+$<150>, use=wy60-42-w,
6144: #
6145: wy60-vb|wyse60-vb|Wyse 60 visible bell,
6146: bel@, use=wy60,
6147: wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell,
6148: bel@,
6149: use=wy60-w,
6150:
6151: # The Wyse-99GT looks at lot like the Wyse 60 except that it
6152: # does not have the 42/43 line mode. In the Wyse-60 the "lines"
6153: # setup parameter controls the number of lines on the screen.
6154: # For the Wyse 99GT the "lines" setup parameter controls the
6155: # number of lines in a page. The screen can display 25 lines max.
6156: # The Wyse-99GT also has personalities for the VT220 and
6157: # Tektronix 4014. But this has no bearing on the native mode.
6158: #
6159: # (msgr) should be set but the clear screen fails when in
6160: # alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear
6161: # then set msgr, else use msgr@.
6162: #
6163: # u0 -> enter Tektronix mode
6164: # u1 -> exit Tektronix mode
6165: #
6166: wy99gt|wyse99gt|Wyse 99gt,
6167: msgr@,
6168: clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>,
6169: el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>,
6170: il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@,
6171: ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1,
6172: u0=\E~>\E8, u1=\E[42h,
6173: use=wy60,
6174: #
6175: wy99gt-w|wyse99gt-w|wyse 99gt 132-column,
6176: cols#132, lw#7, nlab#16, wsl#97,
6177: clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>,
6178: dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, use=wy99gt,
6179: #
6180: wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines,
6181: lh@, lines#25, lw@, nlab@,
6182: pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt,
6183: #
6184: wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines,
6185: lh@, lines#25, lw@, nlab@,
6186: pln@, rs2=\E`;$<150>, use=wy99gt-w,
6187: #
6188: wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell,
6189: bel@, use=wy99gt,
6190: #
6191: wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell,
6192: bel@,
6193: use=wy99gt-w,
1.11 millert 6194:
6195: # Can't set tabs! Other bugs (ANSI mode only):
6196: # - can't redefine function keys (anyway, key redefinition in ANSI mode
6197: # is too much complex to be described);
6198: # - meta key can't be described (the terminal forgets it when reset);
6199: # The xon-xoff handshaking can't be disabled while in ansi personality, so
6200: # emacs can't work at speed greater than 9600 baud. No padding is needed at
6201: # this speed.
6202: # dch1 has been commented out because it causes annoying glittering when
6203: # vi deletes one character at the beginning of a line with tabs in it.
6204: # dch makes sysgen(1M) have a horrible behaviour when deleting
6205: # a screen and makes screen(1) behave badly, so it is disabled too. The nice
6206: # thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are
6207: # not, so smir and rmir are commented out as well.
6208: # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
6209: wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard),
6210: am, km, mc5i, mir, msgr, xenl,
6211: cols#80, it#8, lines#25, vt#3,
6212: acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~,
6213: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6214: clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M,
6215: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>,
6216: cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED,
6217: cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>,
6218: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
6219: cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M,
6220: ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>,
6221: enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H,
6222: hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL,
6223: il1=\E[L, ind=\n$<1>, invis=\E[8m,
6224: is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i,
6225: kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
6226: kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
6227: kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ,
6228: kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~,
6229: kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~,
6230: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h,
6231: mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8,
6232: rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
6233: rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m,
6234: rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i,
6235: sc=\E7,
6236: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;,
6237: sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h,
6238: smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd,
6239:
6240: # This is the american terminal. Here tabs work fine.
6241: # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
6242: wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard),
6243: hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g,
6244: use=wy99-ansi,
6245:
6246: # This terminal (firmware version 02) has a lot of bugs:
6247: # - can't set tabs;
6248: # - other bugs in ANSI modes (see above).
6249: # This description disables handshaking when using cup. This is because
6250: # GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal
6251: # cannot be used at speeds greater than 9600 baud, because at greater
6252: # speeds handshaking is needed even for character sending. If you use
6253: # DTR handshaking, you can use even greater speeds.
6254: # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
6255: wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard),
6256: am, bw, hs, km, mc5i, mir, msgr, xon,
6257: cols#80, it#8, lines#25, wsl#46,
6258: acsc='x+y.wI~_vj(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G,
6259: blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032,
6260: cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L,
6261: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
6262: cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r,
6263: ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>,
6264: flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE,
6265: ind=^J, invis=\EG3,
6266: is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024,
6267: ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H,
6268: kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r,
6269: kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r,
6270: kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r,
6271: kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r,
6272: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
6273: kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#,
6274: nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed.,
6275: rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30,
6276: rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024,
6277: sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;,
6278: sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30,
6279: smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF,
6280:
6281: # This is the american terminal. Here tabs work.
6282: # From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998
6283: wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard),
6284: hts=\E1, tbc=\E0,
6285: use=wy99f,
6286:
1.1 millert 6287: #
6288: # The Wyse 160 is combination of the WY-60 and the WY-99gt.
6289: # The reset strings are slow and the pad times very depending
6290: # on other parameters such as font loading. I have tried
6291: # to follow the following outline:
6292: #
6293: # <rs1> -> set personality
6294: # <rs2> -> set number of columns
6295: # <rs3> -> set number of lines
6296: # <is1> -> select the proper font
6297: # <is2> -> do the initialization
6298: # <is3> -> set up display memory (2 pages)
6299: #
6300: # The display memory may be used for either text or graphics.
6301: # When "Display Memory = Shared" the terminal will have more pages
6302: # but garbage may be left on the screen when you switch from
6303: # graphics to text. If "Display Memory = Unshared" then the
6304: # text area will be only one page long.
6305: #
6306: # (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid
6307: # a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr)
6308: wy160|wyse160|Wyse 160,
6309: am, bw, hs, km, mc5i, mir, msgr,
6310: cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38,
6311: acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
6312: bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>,
6313: cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6314: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>,
6315: dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>,
6316: el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I,
6317: hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1,
6318: is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
6319: is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
6320: kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
6321: kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
6322: kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
6323: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6324: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ,
6325: kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K,
6326: mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>,
1.11 millert 6327: pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
6328: pfx=\EZ1%p1%{63}%+%c%p2%s\177,
6329: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>,
1.1 millert 6330: rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er,
6331: rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>,
6332: rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>,
1.11 millert 6333: sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
1.1 millert 6334: sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
6335: smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21,
6336: tbc=\E0, tsl=\EF,
6337: use=adm+sgr,
6338: #
6339: wy160-w|wyse160-w|wyse 160 132-column,
6340: cols#132, lw#7, nlab#16, wsl#90,
6341: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>,
6342: rs2=\EeF$<150>\E`;$<150>, use=wy160,
6343: #
6344: wy160-25|wyse160-25|wyse 160 80-column 25-lines,
6345: lh@, lines#25, lw@, nlab@,
6346: pln@, rs3=\EwG\Ee)$<200>, use=wy160,
6347: wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines,
6348: lh@, lines#25, lw@, nlab@,
6349: pln@, rs3=\EwG\Ee)$<200>, use=wy160-w,
6350: #
6351: wy160-42|wyse160-42|wyse 160 80-column 42-lines,
6352: lines#42,
6353: clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>,
6354: ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>,
6355: rs3=\Ee*$<150>,
6356: use=wy160,
6357: wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines,
6358: cols#132, lw#7, nlab#16, wsl#90,
6359: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>,
6360: rs2=\EeF$<150>\E`;$<150>,
6361: use=wy160-42,
6362: #
6363: wy160-43|wyse160-43|wyse 160 80-column 43-lines,
6364: lh@, lines#43, lw@, nlab@,
6365: pln@, rs3=\Ee+$<150>, use=wy160-42,
6366: wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines,
6367: lh@, lines#43, lw@, nlab@,
6368: pln@, rs3=\Ee+$<150>, use=wy160-42-w,
6369: #
6370: wy160-vb|wyse160-vb|Wyse 160 visible bell,
6371: bel@, use=wy160,
6372: wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell,
6373: bel@,
6374: use=wy160-w,
6375: #
6376: # The Wyse 75 is a vt100 lookalike without advanced video.
6377: #
6378: # The Wyse 75 can support one attribute (e.g. Dim, Inverse,
6379: # Underline) without magic cookies. The following description
6380: # uses this capability, but when more than one attribute is
6381: # put on the screen at once, all attributes will be changed
6382: # to be the same as the last attribute given.
6383: # The Wyse 75 can support more attributes when used with magic
6384: # cookies. The wy75-mc terminal description uses magic cookies
6385: # to correctly handle multiple attributes on a screen.
6386: #
6387: wy75|wyse75|wyse 75,
6388: am, hs, mc5i, mir, msgr, xenl, xon,
6389: cols#80, lines#24, ma#1, pb#1201, wsl#78,
6390: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6391: bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>,
6392: cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>,
6393: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
6394: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
6395: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>,
6396: dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>,
6397: dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001,
6398: ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>,
6399: enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A,
6400: home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
6401: ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
6402: ind=\n$<2>, ip=$<1>,
6403: is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h,
6404: is2=\E>\E(B\E)0\017, is3=\E[m, ka1=\EOw, ka3=\EOy,
6405: kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
6406: kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, kent=\EOM,
6407: kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6408: kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6409: kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i,
6410: kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M,
6411: kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
6412: khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~,
6413: kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i,
6414: mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O,
6415: rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m,
6416: rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l,
6417: sc=\E7,
6418: sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;,
6419: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6420: smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m,
6421: tbc=\E[3g, tsl=\E[>\,\001,
6422: #
6423: # This terminal description uses the non-hidden attribute mode
6424: # (with magic cookie).
6425: #
6426: wy75-mc|wyse75-mc|wyse 75 with magic cookies,
6427: msgr@,
6428: ma@, xmc#1,
6429: blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p,
6430: rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p,
6431: sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;,
6432: sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p,
6433: use=wy75,
6434: wy75-vb|wyse75-vb|wyse 75 with visible bell,
6435: pb@,
6436: bel@, use=wy75,
6437: wy75-w|wyse75-w|wyse 75 in 132 column mode,
6438: cols#132, wsl#130,
6439: rs2=\E[35h\E[?3h$<80>, use=wy75,
6440: wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns,
6441: pb@,
6442: bel@, use=wy75-w,
6443: #
6444: # Wyse 85 emulating a vt220 7 bit mode.
6445: # 24 line screen with status line.
6446: #
6447: # The vt220 mode permits more function keys but it wipes out
6448: # the escape key. I strongly recommend that <f11> be set to
6449: # escape (esc).
6450: # The terminal may have to be set for 8 data bits and 2 stop
6451: # bits for the arrow keys to work.
6452: # The Wyse 85 runs faster with XON/XOFF enabled. Also the
6453: # <dch> and <ich> work best when XON/XOFF is set. <ich> and
6454: # <dch> leave trash on the screen when used without XON/XOFF.
6455: #
6456: wy85|wyse85|wyse 85,
6457: am, hs, mc5i, mir, msgr, xenl, xon,
6458: cols#80, it#8, lines#24, wsl#80,
6459: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6460: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6461: clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
6462: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6463: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6464: cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
6465: dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
6466: dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
6467: ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
6468: enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
6469: fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
6470: ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
6471: ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
6472: is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
6473: is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
6474: kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
6475: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf1=\EOP,
6476: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6477: kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
6478: kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR,
6479: kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6480: kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~,
6481: knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3,
6482: lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
6483: ri=\EM$<3>, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>,
6484: rmso=\E[m, rmul=\E[m, rs1=\E[13l\E[3l\E!p,
6485: rs2=\E[35h\E[?3l$<70>, rs3=\E[?5l, sc=\E7,
6486: sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6487: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6488: smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6489: tsl=\E[40h\E7\E[25;%i%p1%dH,
6490: #
6491: # Wyse 85 with visual bell.
6492: wy85-vb|wyse85-vb|wyse 85 with visible bell,
6493: bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85,
6494: #
6495: # Wyse 85 in 132-column mode.
6496: wy85-w|wyse85-w|wyse 85 in 132-column mode,
6497: cols#132, wsl#132,
6498: rs2=\E[35h\E[?3h$<70>, use=wy85,
6499: #
6500: # Wyse 85 in 132-column mode with visual bell.
6501: wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns,
6502: bel@,
6503: use=wy85-w,
1.14 millert 6504:
6505: # From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998
6506: # This copes with an apparent firmware bug in the wy85. He writes:
6507: # "What I did was change leave the terminal cursor keys set to Normal
6508: # (instead of application), and change \E[ to \233 for all the keys in
6509: # terminfo. At one point, I found some reference indicating that this
6510: # terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just
6511: # me), but I can't find that and the server under my bookmark to "Wyse
6512: # Technical" isn't responding. So there's the question of wether the wy85
6513: # terminfo should reflect the manufactuer's intended behaviour of the terminal
6514: # or the actual."
6515: wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode,
6516: am, hs, mc5i, mir, msgr, xenl, xon,
6517: cols#80, it#8, lines#24, wsl#80,
6518: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6519: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6520: clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M,
6521: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6522: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6523: cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
6524: dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m,
6525: dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l,
6526: ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K,
6527: enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>,
6528: fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH,
6529: ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>,
6530: ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W,
6531: is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>,
6532: is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
6533: kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B,
6534: kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM,
6535: kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~,
6536: kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~,
6537: kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ,
6538: kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~,
6539: kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~,
6540: khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~,
6541: kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
6542: mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>,
6543: rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m,
6544: rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>,
6545: rs3=\E[?5l, sc=\E7,
6546: sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;,
6547: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
6548: smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
6549: tsl=\E[40h\E7\E[25;%i%p1%dH,
1.1 millert 6550: #
6551: # Wyse 185 emulating a vt320 7 bit mode.
6552: #
6553: # This terminal always displays 25 lines. These lines may be used
6554: # as 24 data lines and a terminal status line (top or bottom) or
6555: # 25 data lines. The 48 and 50 line modes change the page size
6556: # and not the number of lines on the screen.
6557: #
6558: # The Compose Character key can be used as a meta key if changed
6559: # by set-up.
6560: #
6561: wy185|wyse185|wyse 185,
6562: am, hs, km, mc5i, mir, msgr, xenl, xon,
6563: cols#80, it#8, lines#24, wsl#80,
6564: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6565: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6566: clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
6567: csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
6568: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6569: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6570: cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>,
6571: dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
6572: dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>,
6573: el=\E[K, el1=\E[1K, enacs=\E)0,
6574: flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8,
6575: home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH,
6576: ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>,
6577: ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
6578: is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h,
6579: is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu,
6580: kbs=^H, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
6581: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kent=\EOM,
6582: kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~,
6583: kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~,
6584: kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ,
6585: kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~,
6586: kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
6587: khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
6588: kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i,
6589: mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<2>,
6590: rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, rmkx=\E>,
6591: rmso=\E[27m, rmul=\E[24m,
6592: rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
6593: rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
6594: sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6595: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
6596: smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
6597: tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd,
6598: #
6599: # Wyse 185 with 24 data lines and top status (terminal status)
6600: wy185-24|wyse185-24|wyse 185 with 24 data lines,
6601: hs@,
6602: dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy185,
6603: #
6604: # Wyse 185 with visual bell.
6605: wy185-vb|wyse185-vb|wyse 185+flash,
6606: bel@, use=wy185,
6607: #
6608: # Wyse 185 in 132-column mode.
6609: wy185-w|wyse185-w|wyse 185 in 132-column mode,
6610: cols#132, wsl#132,
6611: dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
6612: ip=$<7>, rs2=\E[35h\E[?3h,
6613: use=wy185,
6614: #
6615: # Wyse 185 in 132-column mode with visual bell.
6616: wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols,
6617: bel@, use=wy185-w,
6618:
6619: # wy325 terminfo entries
6620: # Done by Joe H. Davis 3-9-92
6621:
6622: # lines 25 columns 80
6623: #
6624: wy325|wyse325|Wyse epc,
6625: am, bw, hs, mc5i, mir,
6626: cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45,
6627: acsc=+/\,.0[Iha2fxgqh1jYk?lZm@nEqDtCu4vAwBx3yszr{c~~,
6628: bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>,
6629: cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
6630: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>,
6631: dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>,
6632: flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1,
6633: il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1,
6634: is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El,
6635: is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H,
6636: kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY,
6637: kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
6638: kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
6639: kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r,
6640: kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq,
6641: kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K,
6642: mc0=\EP, mc4=^T, mc5=\Ed#,
1.11 millert 6643: pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
6644: pfx=\EZ1%p1%{63}%+%c%p2%s\177,
6645: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>,
1.1 millert 6646: rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11,
6647: rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>,
6648: rs3=\EwG\Ee($<100>,
1.11 millert 6649: sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
1.1 millert 6650: sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/,
6651: smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0,
6652: tsl=\EF,
6653: use=adm+sgr,
6654:
6655: #
6656: # lines 24 columns 80 vb
6657: #
6658: wy325-vb|wyse325-vb|wyse-325 with visual bell,
6659: bel@, use=wy325,
6660:
6661: #
6662: # lines 24 columns 132
6663: #
6664: wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode,
6665: cols#132, lw#7, nlab#16, wsl#97,
6666: cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>,
6667: rs2=\E`;$<70>, use=wy325,
6668: #
6669: # lines 25 columns 80
6670: #
6671: wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines,
6672: lh@, lines#25, lw@, nlab@,
6673: pln@, rs3=\EwG\Ee)$<100>, use=wy325,
6674: #
6675: # lines 25 columns 132
6676: #
6677: wy325-25w|wyse325-25w|wy325 132 columns,
6678: lh@, lines#25, lw@, nlab@,
6679: pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
6680: #
6681: # lines 25 columns 132 vb
6682: #
6683: wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video,
6684: bel@,
6685: use=wy325-w,
6686:
6687: #
6688: # lines 42 columns 80
6689: #
6690: wy325-42|wyse325-42|wyse-325 42 lines,
6691: lh@, lines#42, lw@, nlab@,
6692: pln@, rs3=\EwG\Ee)$<100>, use=wy325,
6693: #
6694: # lines 42 columns 132
6695: #
6696: wy325-42w|wyse325-42w|wyse-325 42 lines wide mode,
6697: lh@, lines#42, lw@, nlab@,
6698: pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
6699: #
6700: # lines 42 columns 132 vb
6701: #
6702: wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell,
6703: bel@,
6704: use=wy325-w,
6705: #
6706: # lines 43 columns 80
6707: #
6708: wy325-43|wyse325-43|wyse-325 43 lines,
6709: lh@, lines#43, lw@, nlab@,
6710: pln@, use=wy325,
6711: #
6712: # lines 43 columns 132
6713: #
6714: wy325-43w|wyse325-43w|wyse-325 43 lines wide mode,
6715: lh@, lines#43, lw@, nlab@,
6716: pln@, rs3=\EwG\Ee)$<100>, use=wy325-w,
6717: #
6718: # lines 43 columns 132 vb
6719: #
6720: wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell,
6721: bel@,
6722: use=wy325-w,
6723:
6724: # Wyse 370 -- 24 line screen with status line.
6725: #
6726: # The terminal may have to be set for 8 data bits and 2 stop
6727: # bits for the arrow keys to work.
6728: #
6729: # If you change keyboards the terminal will send different
6730: # escape sequences.
6731: # The following definition is for the basic terminal without
6732: # function keys.
6733: #
6734: # <u0> -> enter Tektronix 4010/4014 mode
6735: # <u1> -> exit Tektronix 4010/4014 mode
6736: # <u2> -> enter ASCII mode (from any ANSI mode)
6737: # <u3> -> exit ASCII mode (goto native ANSI mode)
6738: # <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode)
6739: # <u5> -> exit Tek 4207 mode (goto native ANSI mode)
6740: #
6741: # Bug: The <op> capability resets attributes.
6742: wy370-nk|wyse 370 without function keys,
6743: am, ccc, hs, mc5i, mir, msgr, xenl, xon,
6744: colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80,
6745: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6746: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6747: clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
6748: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
6749: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6750: cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A,
6751: cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>,
6752: dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>,
6753: dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>,
6754: el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0,
6755: flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8,
6756: home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH,
6757: ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>,
6758: ind=\n$<2>,
6759: initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw,
6760: invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>,
6761: is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h,
6762: is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i,
6763: mc5=\E[5i,
6764: oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w,
6765: op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O,
6766: rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l,
6767: rmkx=\E>, rmso=\E[27m, rmul=\E[24m,
6768: rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>,
6769: rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw,
6770: sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6771: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q,
6772: smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m,
6773: tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH,
6774: u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B,
6775: u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd,
6776: #
6777: # Function key set for the ASCII (wy-50 compatible) keyboard
6778: # This is the default 370.
6779: #
6780: wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard,
6781: kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6782: kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i,
6783: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
6784: kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i,
6785: kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
6786: kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP,
6787: knp=\E[U, kpp=\E[V,
6788: use=wy370-nk,
6789: #
6790: # Function key set for the VT-320 (and wy85) compatible keyboard
6791: #
6792: wy370-105k|Wyse 370 with 105 key keyboard,
6793: ka1=\EOw, ka3=\EOy, kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs,
6794: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
6795: kdch1=\E[3~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
6796: kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
6797: kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
6798: kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
6799: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
6800: khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
6801: kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
6802: use=wy370-nk,
6803: #
6804: # Function key set for the PC compatible keyboard
6805: #
6806: wy370-EPC|Wyse 370 with 102 key keyboard,
6807: kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
6808: kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~,
6809: kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
6810: kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
6811: khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V,
6812: use=wy370-nk,
6813: #
6814: # Wyse 370 with visual bell.
6815: wy370-vb|Wyse 370 with visible bell,
6816: bel@, use=wy370,
6817: #
6818: # Wyse 370 in 132-column mode.
6819: wy370-w|Wyse 370 in 132-column mode,
6820: cols#132, wsl#132,
6821: rs2=\E[35h\E[?3h$<70>, use=wy370,
6822: #
6823: # Wyse 370 in 132-column mode with visual bell.
6824: wy370-wvb|Wyse 370 with visible bell 132-columns,
6825: flash=\E[30h\E\,\E[30l$<300>,
6826: use=wy370-w,
6827: wy370-rv|Wyse 370 reverse video,
6828: rs3=\E[32h\E[?5h, use=wy370,
6829: #
6830: # Wyse 99gt Tektronix 4010/4014 emulator,
6831: #
6832: wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator,
6833: am, os,
6834: cols#74, lines#35,
6835: bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
6836: cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
6837: cuu1=^K, ff=^L,
6838: hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
6839: home=^]7`x @\037,
6840: hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
6841: is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h,
6842: #
6843: # Wyse 160 Tektronix 4010/4014 emulator,
6844: #
6845: wy160-tek|Wyse 160 Tektronix 4010/4014 emulator,
6846: cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037,
6847: home=^]8`g @\037,
6848: use=wy99gt-tek,
6849: #
6850: # Wyse 370 Tektronix 4010/4014 emulator,
6851: #
6852: wy370-tek|Wyse 370 Tektronix 4010/4014 emulator,
6853: am, os,
6854: cols#80, lines#36,
6855: bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s,
6856: cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037,
6857: cuu1=^K, ff=^L,
6858: hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037,
6859: home=^]8g @\037,
6860: hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037,
6861: is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K,
6862: nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0,
6863:
6864: # Vendor-supplied Wyse entries end here.
6865:
6866: #
6867: #TITLE: TERMINFO ENTRY WY520
6868: #DATE: 8/5/93
6869: # The WY520 terminfo is based on the WY285 entry published on the WYSE
6870: # BBS with the addition of more function keys and special keys.
6871: #
6872: # rs1 -> set personality
6873: # rs2 -> set number of columns
6874: # rs3 -> set number of lines
6875: # is1 -> select the proper font
6876: # is2 -> do the initialization
6877: # is3 -> If this string is empty then rs3 gets sent.
6878: #
6879: # Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard
6880: # - The BS key is programmed to generate BS in smcup since
6881: # is2 doesn't seem to work.
6882: # - Remove and shift/Remove: delete a character
6883: # - Insert : enter insert mode
6884: # - Find : delete to end of file
6885: # - Select : clear a line
6886: # - F11, F12, F13: send default sequences (not ESC, BS, LF)
6887: # - F14 : Home key
6888: # - Bottom status line (host writable line) is used.
6889: # - smkx,rmkx are removed because this would put the numeric
6890: # keypad in Dec application mode which doesn't seem to work
6891: # with SCO applications.
6892: #
6893: wy520|wyse520|wyse 520,
6894: am, hs, km, mc5i, mir, xenl, xon,
6895: cols#80, it#8, lines#24, wsl#80,
6896: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
6897: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
6898: clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M,
6899: csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H,
6900: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
6901: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
6902: cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>,
6903: dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~,
6904: ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K,
6905: enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I,
6906: hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>,
6907: il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W,
6908: is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h,
6909: is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOu, kb2=\EOy,
6910: kbs=^H, kc1=\EOq, kc3=\EOs, kcbt=\E[Z, kcub1=\E[D,
6911: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~,
6912: kel=\E[4~, kent=\EOM, kf1=\EOP, kf10=\E[21~, kf11=\E[23~,
6913: kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
6914: kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
6915: kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
6916: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
6917: khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~,
6918: kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4,
6919: mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
6920: ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l,
6921: rmso=\E[m, rmul=\E[24m,
6922: rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l,
6923: rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7,
6924: sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
6925: sgr0=\E[m\017, smacs=^N, smam=\E[?7h,
6926: smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
6927: tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`,
6928: vpa=\E[%i%p1%dd,
6929: #
6930: # Wyse 520 with 24 data lines and status (terminal status)
6931: wy520-24|wyse520-24|wyse 520 with 24 data lines,
6932: hs@,
6933: dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520,
6934: #
6935: # Wyse 520 with visual bell.
6936: wy520-vb|wyse520-vb|wyse 520 with visible bell,
1.11 millert 6937: flash=\E[30h\E\,\E[30l$<100>, use=wy520,
1.1 millert 6938: #
6939: # Wyse 520 in 132-column mode.
6940: wy520-w|wyse520-w|wyse 520 in 132-column mode,
6941: cols#132, wsl#132,
6942: dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
6943: ip=$<7>, rs2=\E[35h\E[?3h,
6944: use=wy520,
6945: #
6946: # Wyse 520 in 132-column mode with visual bell.
6947: wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns,
1.11 millert 6948: flash=\E[30h\E\,\E[30l$<100>,
1.1 millert 6949: use=wy520-w,
6950: #
6951: #
6952: # Wyse 520 emulating a vt420 7 bit mode.
6953: # The DEL key is programmed to generate BS in is2.
6954: # With EPC keyboard.
6955: # - 'End' key will clear till end of line on EPC keyboard
6956: # - Shift/End : ignored.
6957: # - Insert : enter insert mode.
6958: # - Delete : delete a character (have to change interrupt character
6959: # to CTRL-C: stty intr '^c') for it to work since the
6960: # Delete key sends 7FH.
6961: wy520-epc|wyse520-epc|wyse 520 with EPC keyboard,
6962: kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~,
6963: kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H,
6964: use=wy520,
6965: #
6966: # Wyse 520 with 24 data lines and status (terminal status)
6967: # with EPC keyboard.
1.14 millert 6968: wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard,
1.1 millert 6969: hs@,
6970: dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, use=wy520-epc,
6971: #
6972: # Wyse 520 with visual bell.
1.14 millert 6973: wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard,
1.11 millert 6974: flash=\E[30h\E\,\E[30l$<100>,
1.1 millert 6975: use=wy520-epc,
6976: #
6977: # Wyse 520 in 132-column mode.
6978: wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard,
6979: cols#132, wsl#132,
6980: dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>,
6981: ip=$<7>, rs2=\E[35h\E[?3h,
6982: use=wy520-epc,
6983: #
6984: # Wyse 520 in 132-column mode with visual bell.
1.14 millert 6985: wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard,
1.11 millert 6986: flash=\E[30h\E\,\E[30l$<100>,
1.1 millert 6987: use=wy520-epc-w,
6988: #
6989: # Wyse 520 in 80-column, 36 lines
6990: wy520-36|wyse520-36|wyse 520 with 36 data lines,
6991: hs@,
6992: lines#36,
6993: dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520,
6994: #
6995: # Wyse 520 in 80-column, 48 lines
6996: wy520-48|wyse520-48|wyse 520 with 48 data lines,
6997: hs@,
6998: lines#48,
6999: dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520,
7000: #
7001: # Wyse 520 in 132-column, 36 lines
7002: wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines,
7003: cols#132, wsl#132,
7004: rs2=\E[?3h,
7005: rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36,
7006: #
7007: # Wyse 520 in 132-column, 48 lines
7008: wy520-48w|wyse520-48w|wyse 520 with 48 data lines,
7009: cols#132, wsl#132,
7010: rs2=\E[?3h,
7011: rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48,
7012: #
7013: #
7014: # Wyse 520 in 80-column, 36 lines with EPC keyboard
7015: wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard,
7016: hs@,
7017: lines#36,
7018: dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, use=wy520-epc,
7019: #
7020: # Wyse 520 in 80-column, 48 lines with EPC keyboard
7021: wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard,
7022: hs@,
7023: lines#48,
7024: dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, use=wy520-epc,
7025: #
7026: # Wyse 520 in 132-column, 36 lines with EPC keyboard
7027: wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard,
7028: cols#132, wsl#132,
7029: rs2=\E[?3h,
7030: rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, use=wy520-36pc,
7031: #
7032: # Wyse 520 in 132-column, 48 lines with EPC keyboard
1.14 millert 7033: wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard,
1.1 millert 7034: cols#132, wsl#132,
7035: rs2=\E[?3h,
7036: rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, use=wy520-48pc,
7037:
7038: # From: John Gilmore <hoptoad!gnu@lll-crg.arpa>
7039: # (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such
7040: # file and we don't know what <hts> is -- esr)
7041: wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on,
1.11 millert 7042: OTbs, am,
1.1 millert 7043: cols#80, it#8, lines#24,
7044: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
7045: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW,
7046: dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J,
1.11 millert 7047: is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F,
7048: kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O,
7049: rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N,
7050: smul=^N,
1.1 millert 7051:
7052: wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad,
7053: is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=,
1.11 millert 7054: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7055: khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>,
7056: use=wy75,
1.1 millert 7057:
7058: # From: Eric Freudenthal <freudent@eric.ultra.nyu.edu>
7059: wy100q|Wyse 100 for Quotron,
1.11 millert 7060: OTbs,
7061: cols#80, lines#24, xmc#1,
1.1 millert 7062: cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L,
7063: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 7064: dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@,
7065: is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J,
7066: kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq,
7067: use=adm+sgr,
1.1 millert 7068:
7069: #### Kermit terminal emulations
7070: #
7071: # Obsolete Kermit versions may be listed in the section describing obsolete
7072: # non-ANSI terminal emulators later in the file.
7073: #
7074:
7075: # KERMIT standard all versions.
7076: # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
7077: # (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
7078: # From: greg small <gts@populi.berkeley.edu> 9-25-84
7079: kermit|standard kermit,
1.11 millert 7080: OTbs,
7081: cols#80, lines#24,
1.1 millert 7082: clear=\EE, cub1=^H, cuf1=\EC,
7083: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
1.11 millert 7084: el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n,
7085: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
1.1 millert 7086: kermit-am|standard kermit plus auto-margin,
7087: am,
1.11 millert 7088: is2=K1 Standard Kermit plus Automatic Margins\n, use=kermit,
1.1 millert 7089: # IBMPC Kermit 1.2.
7090: # Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does
7091: # not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of
7092: # line).
7093: # From: greg small <gts@populi.berkeley.edu> 8-30-84
7094: pckermit|pckermit12|UCB IBMPC Kermit 1.2,
7095: am,
7096: lines#25,
7097: clear=\EH\EJ, ed@, el@,
1.11 millert 7098: is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit,
1.1 millert 7099: # IBMPC Kermit 1.20
7100: # Cannot use line 25, now acts funny like ansi special scrolling region.
7101: # Initialization must escape from that region by cursor position to line 24.
7102: # Cannot use character insert because 1.20 goes crazy if insert at col 80.
7103: # Does not use :am: because autowrap is lost when kermit dropped and restarted.
7104: # From: greg small <gts@populi.berkeley.edu> 12-19-84
7105: pckermit120|UCB IBMPC Kermit 1.20,
7106: it#8, lines#24,
1.11 millert 7107: cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I,
7108: il1=\EL,
1.1 millert 7109: is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n,
7110: rmir@, rmso=\Eq, smir@, smso=\Ep,
1.11 millert 7111: use=kermit,
1.1 millert 7112: # MS-DOS Kermit 2.27 for the IBMPC
7113: # Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi.
7114: # Cannot use line 25, now acts funny like ansi special scrolling region.
7115: # Initialization must escape from that region by cursor position to line 24.
7116: # Does not use am: because autowrap is lost when kermit dropped and restarted.
7117: # Reverse video for standout like H19.
7118: # (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr)
7119: # From: greg small <gts@populi.berkeley.edu> 3-17-85
7120: msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC,
1.11 millert 7121: OTbs, am@,
1.1 millert 7122: cols#80, it#8, lines#24,
7123: clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
7124: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
1.11 millert 7125: cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK,
7126: home=\EH, ht=^I, il1=\EL,
1.1 millert 7127: is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n,
1.11 millert 7128: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek,
7129: rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep,
1.1 millert 7130: # MS-DOS Kermit 2.27 with automatic margins
7131: # From: greg small <gts@populi.berkeley.edu> 3-17-85
7132: msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins,
7133: am,
7134: cvvis=\EO\Eq\EG\EvK5,
1.11 millert 7135: is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n, use=msk227,
1.1 millert 7136: # MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC
7137: # Automatic margins now default. Use ansi <sgr> for highlights.
7138: # Define function keys.
7139: # (msk22714: removed obsolete ":kn#10:" -- esr)
7140: # From: greg small <gts@populi.berkeley.edu> 3-17-85
7141: msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC,
7142: am,
7143: bold=\E[1m, cvvis=\EO\Eq\EG\EvK6,
7144: is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n,
1.11 millert 7145: kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6,
7146: kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m,
7147: sgr0=\E[m, smso=\E[1m, smul=\E[4m,
7148: use=mskermit227,
1.1 millert 7149: # This was designed for a VT320 emulator, but it is probably a good start
7150: # at support for the VT320 itself.
7151: # Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu.
7152: # (vt320-k3: I added <rmam>/<smam> based on the init string -- esr)
7153: vt320-k3|MS-Kermit 3.00's vt320 emulation,
7154: am, eslok, hs, km, mir, msgr, xenl,
7155: cols#80, it#8, lines#49, pb#9600, vt#3,
1.11 millert 7156: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.1 millert 7157: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7158: clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M,
1.11 millert 7159: csr=\E[%i%p1%d;%p1%dr, cub=\E[%p1%dD, cub1=^H,
7160: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7161: cup=\E[%i%p1%d;%p1%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7162: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
7163: dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
1.1 millert 7164: flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l,
1.11 millert 7165: fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
7166: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
7167: is2=\E>\E F\E[?1l\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD,
7168: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~,
7169: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
7170: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~,
7171: kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8,
7172: rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l,
7173: rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
7174: rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~,
1.1 millert 7175: sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h,
7176: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7177: tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd,
7178: # From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991
7179: # ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996
7180: # (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr)
7181: vt320-k311|dec vt320 series as defined by kermit 3.11,
7182: am, eslok, hs, mir, msgr, xenl, xon,
7183: cols#80, it#8, lines#24, vt#3,
1.11 millert 7184: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
1.1 millert 7185: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
7186: clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M,
7187: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7188: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7189: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.11 millert 7190: cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
7191: dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K,
7192: flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH,
7193: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED,
1.1 millert 7194: is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H,
1.11 millert 7195: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
7196: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~,
7197: kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2,
7198: lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m,
7199: rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O,
7200: rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m,
7201: rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N,
7202: smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
7203: smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH,
7204:
7205: ######## NON-ANSI TERMINAL EMULATIONS
7206: #
1.1 millert 7207:
1.11 millert 7208: #### Avatar
7209: #
7210: # These entries attempt to describe Avatar, a terminal emulation used with
7211: # MS-DOS bulletin-board systems. It was designed to give ANSI-like
7212: # capabilities, but with cheaper (shorter) control sequences. Messy design,
7213: # excessively dependent on PC idiosyncracies, but apparently rather popular
7214: # in the BBS world.
7215: #
7216: # No color support. Avatar doesn't fit either of the Tektronix or HP color
7217: # models that terminfo knows about. An Avatar color attribute is the
7218: # low 7 bits of the IBM-PC display-memory attribute. Bletch.
7219: #
7220: # I wrote these entries while looking at the Avatar spec. I don't have
7221: # the facilities to test them. Let me know if they work, or don't.
7222: #
7223: # Avatar escapes not used by these entries (because maybe you're smarter
7224: # and more motivated than I am and can figure out how to wrap terminfo
7225: # around some of them, and because they are weird enough to be funny):
7226: # level 0:
7227: # ^L -- clear window/reset current attribute to default
7228: # ^V^A%p1%c -- set current color attribute, parameter decodes as follows:
7229: #
7230: # bit: 6 5 4 3 2 1 0
7231: # | | | | |
7232: # +---+---+ | +---+---+
7233: # | | |
7234: # | | foreground color
7235: # | foreground intensity
7236: # background color
7237: # level 0+:
7238: # ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines
7239: # ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines
7240: # ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1
7241: # ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1
7242: # (^V^L and ^V^M set the current attribute as a side-effect.)
7243: # ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes
7244: # in the pattern, <c> the number of times the pattern
7245: # should be repeated. If either value is 0, no-op.
7246: # The pattern can contain Avatar console codes,
7247: # including other ^V ^Y patterns.
7248: # level 1:
7249: # ^V^O -- clockwise mode on; turn print direction right each time you
7250: # hit a window edge (yes, really). Turned off by CR
7251: # ^V^P -- no-op
7252: # ^V^Q%c -- query the driver
7253: # ^V^R -- driver reset
7254: # ^V^S -- Sound tone (PC-specific)
7255: # ^V^T -- change highlight at current cursor poition to %c
7256: # ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b>
7257: # ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c
7258: # -- define window
1.1 millert 7259: #
1.11 millert 7260: # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
7261: # (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to
7262: # tell ncurses that the corresponding highlights exist; it should use <sgr>,
7263: # which is the only method that will actually work for multiple highlights.)
7264: avatar0|avatar terminal emulator level 0,
7265: am, bce, msgr,
7266: cols#80, it#8, lines#25,
7267: blink=^A^V\177, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D,
7268: cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G,
7269: ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%d, rev=^A^Vp,
7270: rs2=^L,
7271: sgr=\026\001%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p4%t{128}%|%;%?%p6%t%{16}%|%;,
7272: sgr0=^V^A^G, smacs=, smso=^A^Vp, smul=^V^A,
7273: use=klone+acs,
7274: # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
7275: avatar0+|avatar terminal emulator level 0+,
7276: dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0,
7277: # From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995
7278: avatar|avatar1|avatar terminal emulator level 1,
7279: civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+,
7280: rmam=^V", rmir=^V^P, smam=^V$,
7281: use=avatar0+,
7282:
7283: #### RBcomm
1.1 millert 7284: #
1.11 millert 7285: # RBComm is a lean and mean terminal emulator written by the Interrupt List
7286: # maintainer, Ralf Brown. It was fairly popular in the late DOS years (early
7287: # '90s), especially in the BBS world, and still has some loyal users due to
7288: # its very small memory footprint and to a cute macro language.
7289: rbcomm|IBM PC with RBcomm and EMACS keybindings,
7290: am, bw, mir, msgr, xenl,
7291: cols#80, it#8, lines#25,
7292: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
7293: clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr,
7294: cub1=^H, cud1=^C, cuf1=^B,
7295: cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^,
7296: cvvis=\E[?25h, dch1=^W, dl=\E[%p1%dM, dl1=^Z,
7297: ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, il=\E[%p1%dL, il1=^K,
7298: ind=\ED, invis=\E[8m,
7299: is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H,
7300: kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED,
7301: rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=,
7302: rmir=^], rmkx=\E>, rmso=^U, rmul=^U,
7303: rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m,
7304: smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T,
7305: rbcomm-nam|IBM PC with RBcomm without autowrap,
7306: am@,
7307: bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
7308: is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H,
7309: kcub1=^H, kcud1=^J, nel=^M^J,
7310: use=rbcomm,
7311: rbcomm-w|IBM PC with RBcomm in 132 column mode,
7312: cols#132,
7313: bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J,
7314: is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H,
7315: kcub1=^H, kcud1=^J, nel=^M^J,
7316: use=rbcomm,
1.1 millert 7317:
7318: ######## OLDER TERMINAL TYPES
7319: #
7320: # This section is devoted to older commercial terminal brands that are now
7321: # discontinued, but known to be still in use or represented by emulations.
7322: #
7323:
7324: #### AT&T (att, tty)
7325: #
7326: # This section also includes Teletype-branded VDTs.
7327: #
7328: # The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now
7329: # Boundless Technologies); for details, see the header comment on the ADDS
7330: # section.
7331: #
7332: # These are AT&T's official terminfo entries. All-caps aliases have been
7333: # removed.
7334: #
1.11 millert 7335: att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode,
7336: am, eo, mir, msgr, xon,
7337: cols#80, it#8, lines#24,
7338: bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H,
7339: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7340: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7341: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7342: el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@,
7343: il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J,
7344: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
7345: kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r,
7346: kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r,
7347: kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r,
7348: kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H,
7349: kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
7350: rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h,
7351: smso=\E[7m,
7352: att2350|AT&T 2350 Video Information Terminal 80 column mode,
7353: mc0@, mc4@, mc5@,
7354: use=att2300,
1.1 millert 7355:
7356: # Must setup RETURN KEY - CR, REC'VD LF - INDEX.
7357: # Seems upward compatible with vt100, plus ins/del line/char.
7358: # On sgr, the protection parameter is ignored.
7359: # No check is made to make sure that only 3 parameters are output.
7360: # standout= reverse + half-intensity = 3 | 5.
7361: # bold= reverse + underline = 2 | 3.
7362: # note that half-bright blinking doesn't look different from normal blinking.
7363: # NOTE:you must program the function keys first, label second!
7364: # (att4410: a BSD entry has been seen with the following capabilities:
7365: # <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>,
7366: # <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr)
1.11 millert 7367: att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1,
7368: am, hs, mir, msgr, xon,
7369: cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
7370: acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7371: bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M,
7372: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
7373: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m,
7374: dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I,
7375: ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0,
7376: is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW,
7377: kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7378: kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT,
7379: kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H,
7380: ll=\E[24H, nel=^M^J,
7381: pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s,
7382: pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
7383: rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
7384: sc=\E7,
7385: sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7386: sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
7387: tsl=\E7\E[25;%p1%{1}%+%dH,
7388:
7389: att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1,
7390: cols#132, wsl#132,
7391: is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1,
7392:
7393: att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2,
7394: OTbs,
7395: pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, use=att5410v1,
7396:
7397: att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode,
7398: cols#132, wsl#132,
7399: is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410,
1.1 millert 7400:
7401: # 5410 in terms of a vt100
7402: # (v5410: added <rmam>/<smam> based on init string -- esr)
1.11 millert 7403: v5410|att5410 in terms of a vt100,
7404: am, mir, msgr, xon,
7405: cols#80, it#8, lines#24, vt#3,
7406: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7407: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
7408: clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
7409: cub1=^H, cud1=^J, cuf1=\E[C$<2>,
7410: cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P,
7411: dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
7412: enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@,
7413: il1=\E[L, ind=^J, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H,
7414: kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
7415: kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\EOx,
7416: kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv,
7417: kf8=\EOl, kf9=\EOw, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>,
7418: rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>,
7419: rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
7420: sc=\E7,
7421: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
7422: sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
7423: smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
1.1 millert 7424:
7425: #
7426: # Teletype Model 5420 -- A souped up 5410, with multiple windows,
7427: # even! the 5420 has three modes: scroll, window or page mode
7428: # this terminfo should work in scroll or window mode, but doesn't
7429: # take advantage of any of the differences between them.
7430: #
7431: # Has memory below (2 lines!)
7432: # 3 pages of memory (plus some spare)
7433: # The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>,
7434: # <hpa>, <hts> would work for these, but these work in both scroll and window
7435: # mode... Unset insert character so insert mode works
7436: # <is1> sets 80 column mode,
7437: # <is2> escape sequence:
7438: # 1) turn off all fonts
7439: # 2) function keys off, keyboard lock off, control display off,
7440: # insert mode off, erasure mode off,
7441: # 3) full duplex, monitor mode off, send graphics off, nl on lf off
7442: # 4) reset origin mode
7443: # 5) set line wraparound
7444: # 6) exit erasure mode, positional attribute mode, and erasure extent mode
7445: # 7) clear margins
7446: # 8) program ENTER to transmit ^J,
7447: # We use \212 to program the ^J because a bare ^J will get translated by
7448: # UNIX into a CR/LF. The enter key is needed for AT&T uOMS.
7449: # 1 2 3 4 5 6 7 8
7450: # <is3> set screen color to black,
7451: # No representation in terminfo for the delete word key: kdw1=\Ed
7452: # Key capabilities assume the power-up send sequence...
7453: # This <rmcup> is not strictly necessary, but it helps maximize
7454: # memory usefulness: <rmcup=\Ez>,
7455: # Alternate sgr0: <sgr0=\E[m\EW^O>,
7456: # Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>,
7457: # smkx programs the SYS PF keys to send a set sequence.
7458: # It also sets up labels f1, f2, ..., f8, and sends edit keys.
7459: # This string causes them to send the strings <kf1>-<kf8>
7460: # when pressed in SYS PF mode.
7461: # (att4415: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 7462: att4415|tty5420|att5420|AT&T 4415/5420 80 cols,
7463: OTbs, db, mir, xon,
7464: lh#2, lm#78, lw#8, nlab#8, wsl#55,
7465: cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD,
7466: cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx,
7467: cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP,
7468: dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD,
7469: flash=\E[?5h$<200>\E[?5l, home=\E[x,
7470: hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@,
7471: il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>,
7472: is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212,
7473: is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M,
7474: kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd,
7475: kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
7476: kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
7477: kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
7478: lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i,
7479: mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt,
7480: pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s,
7481: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV,
7482: rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l,
7483: rmkx=\E[19;0j\E[21;1j\212, rmln=\E|,
7484: sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7485: sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h,
7486: smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g,
7487: tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
7488: use=att4410,
7489:
7490: att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols,
7491: cols#132, lm#54, wsl#97,
7492: is1=\E[?3h$<100>, use=att4415,
7493:
7494: att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv,
7495: flash=\E[?5l$<200>\E[?5h, is3=\E[?5h,
7496: use=att4415,
7497:
7498: att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv,
7499: cols#132, lm#54, wsl#97,
7500: flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, use=att4415,
1.1 millert 7501:
7502: # Note that this mode permits programming USER PF KEYS and labels
7503: # However, when you program user pf labels you have to reselect
7504: # user pf keys to make them appear!
1.11 millert 7505: att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels,
7506: kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
7507: pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s,
7508: pln=\E[%p1%d;0;0;1q%p2%:-16.16s,
7509:
7510: att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels,
7511: kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
7512: use=att4415+nl, use=att4415,
7513:
7514: att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels,
7515: kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
7516: use=att4415+nl, use=att4415-rv,
7517:
7518: att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels,
7519: kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
7520: use=att4415+nl, use=att4415-w,
7521:
7522: att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels,
7523: kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@,
7524: use=att4415+nl, use=att4415-w-rv,
7525:
7526: att5420_2|AT&T 5420 model 2 80 cols,
7527: am, db, hs, mir, msgr, xon,
7528: cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
7529: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7530: blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j,
7531: cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7532: cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C,
7533: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cvvis=\E[11;1j,
7534: dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7535: dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, el=\E[0K,
7536: el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
7537: hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
7538: ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
7539: invis=\E[8m,
7540: is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r,
7541: kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D,
7542: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
7543: kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe,
7544: kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H,
7545: kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U,
7546: kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5,
7547: lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i,
7548: mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J,
7549: pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~,
7550: pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8,
7551: rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j,
7552: rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y,
7553: sc=\E7,
7554: sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7555: sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~,
7556: smso=\E[7m, smul=\E[4m, tbc=\E[3g,
7557: tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd,
7558: att5420_2-w|AT&T 5420 model 2 in 132 column mode,
7559: cols#132,
7560: is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, use=att5420_2,
7561:
7562: att4418|att5418|AT&T 5418 80 cols,
7563: am, xon,
7564: cols#80, lines#24,
7565: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7566: bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD,
7567: cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
7568: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7569: cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m,
7570: dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H,
7571: ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J,
7572: is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%, kcub1=\E@,
7573: kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h,
7574: kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I,
7575: kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E,
7576: kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j,
7577: kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8,
7578: rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7,
7579: sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m,
7580: att4418-w|att5418-w|AT&T 5418 132 cols,
7581: cols#132,
7582: is1=\E[?3h, use=att5418,
7583:
7584: att4420|tty4420|teletype 4420,
7585: OTbs, da, db, eo, msgr, ul, xon,
7586: cols#80, lines#24, lm#72,
7587: bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC,
7588: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
7589: dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s,
7590: kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC,
7591: kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH,
7592: kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET,
7593: lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~,
7594: rmul=\EZ, smdc@, smso=\E}, smul=\E\\,
1.1 millert 7595:
7596: # The following is a terminfo entry for the Teletype 4424
7597: # asynchronous keyboard-display terminal. It supports
7598: # the vi editor. The terminal must be set up as follows,
7599: #
7600: # HIGHLIGHT DEFINITION 3-TONE
7601: # DISPLAY FUNCTION GROUP III
7602: #
7603: # The second entry below provides limited (a la adm3a)
7604: # operation under GROUP II.
7605: #
7606: # This must be used with DISPLAY FUNCTION GROUP I or III
7607: # and HIGHLIGHT DEFINITION 3-TONE
7608: # The terminal has either bold or blink, depending on options
7609: #
7610: # (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr)
1.11 millert 7611: att4424|tty4424|teletype 4424,
7612: OTbs, am, xon,
7613: cols#80, lines#24,
7614: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7615: bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M,
7616: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7617: cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC,
7618: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA,
7619: dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM,
7620: ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
7621: ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h,
7622: kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7623: kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
7624: khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~,
7625: rmul=\EZ,
7626: sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m,
7627: sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\,
7628: tbc=\EF,
7629:
7630: att4424-1|tty4424-1|teletype 4424 in display function group I,
7631: kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@,
7632: use=att4424,
1.1 millert 7633:
7634: # This entry is not one of AT&T's official ones, it was translated from the
7635: # 4.4BSD termcap file. The highlight strings are different from att4424.
7636: # I have no idea why this is -- older firmware version, maybe?
7637: # The following two lines are the comment originally attached to the entry:
7638: # This entry appears to avoid the top line - I have no idea why.
7639: # From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp
7640: att4424m|tty4424m|teletype 4424M,
7641: am, da, db, mir,
7642: cols#80, it#8, lines#23,
1.11 millert 7643: bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
7644: cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP,
7645: dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>,
7646: is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B,
7647: kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
7648: kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m,
7649: sgr0=\E[m, smso=\E[7m, smul=\E[4m,
1.1 millert 7650:
7651: # The Teletype 5425 is really version 2 of the Teletype 5420. It
7652: # is quite similar, except for some minor differences. No page
7653: # mode, for example, so all of the <cup> sequences used above have
7654: # to change back to what's being used for the 5410. Many of the
7655: # option settings have changed their numbering as well.
7656: #
7657: # This has been tested on a preliminary model.
7658: #
7659: # (att5425: added <rmam>/<smam> based on the init string -- esr)
1.11 millert 7660: att5425|tty5425|att4425|AT&T 4425/5425,
7661: am, da, db, hs, mir, msgr, xenl, xon,
7662: cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55,
7663: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7664: bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
7665: clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M,
7666: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7667: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7668: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7669: cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
7670: dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J,
7671: el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
7672: flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H,
7673: hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
7674: il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE,
7675: invis=\E[8m, is1=\E<\E[?3l$<100>,
7676: is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212,
7677: is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J,
7678: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
7679: kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc,
7680: kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi,
7681: kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T,
7682: kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i,
7683: nel=^M^J,
7684: pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
7685: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8,
1.1 millert 7686: rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l,
1.11 millert 7687: rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|,
7688: rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7,
7689: sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7690: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
7691: smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m,
7692: smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH,
7693: vpa=\E[%p1%{1}%+%dd,
7694:
7695: att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels,
7696: smkx=\E[21;1j\E[25;4j\Eent,
7697: use=att4425,
7698:
7699: att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode,
7700: cols#132, lm#54, wsl#97,
7701: is1=\E[?3h$<100>, use=tty5425,
1.1 millert 7702:
7703: # (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:.
7704: # I also added <rmam>/<smam> -- esr)
1.11 millert 7705: att4426|tty4426|teletype 4426S,
7706: am, da, db, xon,
7707: cols#80, lines#24, lm#48,
7708: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7709: bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V,
7710: cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
7711: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7712: cuu=\E[%p1%dA, cuu1=\EA, dch=\E[%p1%dP, dch1=\EP,
7713: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H,
7714: hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^,
7715: il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS,
7716: is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO,
7717: kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
7718: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
7719: kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H,
7720: nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT,
7721: rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m,
7722: rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0,
7723: smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g,
7724: vpa=\E[%p1%dd,
1.1 millert 7725:
7726: # Terminfo entry for the AT&T 510 A Personal Terminal
7727: # Function keys 9 - 16 are available only after the
7728: # screen labeled (soft keys/action blocks) are labeled. Function key
7729: # 9 corresponds to the leftmost touch target on the screen,
7730: # function key 16 corresponds to the rightmost.
7731: #
7732: # This entry is based on one done by Ernie Rice at Summit, NJ and
7733: # changed by Anne Gallup, Skokie, IL, ttrdc!anne
1.11 millert 7734: att510a|bct510a|AT&T 510A Personal Terminal,
7735: am, mir, msgr, xenl, xon,
7736: cols#80, lh#2, lines#24, lw#7, nlab#8,
7737: acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
7738: bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
7739: civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M,
7740: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[1B,
7741: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
7742: cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP,
7743: dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J,
7744: el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I,
7745: hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l,
7746: is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z,
7747: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm,
7748: kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh,
7749: kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe,
7750: kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T,
7751: mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE,
7752: pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM,
7753: rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7,
7754: sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;,
7755: sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m,
7756: smul=\E[4m, tbc=\E[3g,
1.1 millert 7757:
7758: # Terminfo entry for the AT&T 510 D Personal Terminal
7759: # Function keys 9 through 16 are accessed by bringing up the
7760: # system blocks.
7761: # Function key 9 corresponds to the leftmost touch target on the screen,
7762: # function key 16 corresponds to the rightmost.
7763: #
7764: # There are problems with soft key labeling. These are due to
7765: # strangenesses in the native terminal that are impossible to
7766: # describe in a terminfo.
1.11 millert 7767: att510d|bct510d|AT&T 510D Personal Terminal,
7768: am, da, db, mir, msgr, xenl, xon,
7769: cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8,
7770: acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
7771: bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
7772: clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD,
7773: cub1=^H, cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC,
7774: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
7775: cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P,
7776: dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K,
7777: el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H,
7778: hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
7779: il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
7780: invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212,
7781: kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D,
7782: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd,
7783: kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi,
7784: kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf,
7785: kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2,
7786: mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE,
7787: pln=\E[%p1%dp%p2%:-16s, rc=\E8,
7788: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
7789: rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|,
7790: rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|,
7791: rs2=\E[5;0|, sc=\E7,
7792: sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7793: sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h,
7794: smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m,
7795: smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
1.1 millert 7796:
7797: # (att500: I merged this with the att513 entry, att500 just used att513 -- esr)
1.11 millert 7798: att500|att513|AT&T 513 using page mode,
7799: am, chts, mir, msgr, xenl, xon,
7800: cols#80, lh#2, lines#24, lw#8, nlab#8,
7801: acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~,
7802: bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z,
7803: clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M,
7804: csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7805: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
7806: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7807: cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m,
7808: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7809: enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
7810: hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J,
7811: indn=\E[%p1%dE, invis=\E[8m,
7812: is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l,
7813: kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
7814: kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
7815: kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK,
7816: kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ,
7817: kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY,
7818: kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw,
7819: kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd,
7820: kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
7821: kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent,
7822: kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
7823: kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm,
7824: khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi,
7825: kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
7826: kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
7827: kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB,
7828: ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2,
7829: mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i,
7830: nel=\EE,
7831: pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s,
7832: pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s,
7833: pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s,
7834: pln=\E[%p1%dp%p2%:-16s, rc=\E8,
7835: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM,
7836: rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l,
7837: rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m,
7838: rmul=\E[m,
7839: rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l,
7840: rs2=\E[5;0|, sc=\E7,
7841: sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
7842: sgr0=\E[m\017, smacs=^N, smir=\E[4h,
7843: smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m,
7844: smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd,
1.1 millert 7845:
7846: # 01-07-88
7847: # printer must be set to EMUL ANSI to accept ESC codes
7848: # <cuu1> stops at top margin
7849: # <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font
7850: # and alt font ascii,wrap on,tabs cleared
7851: # <is2> disables newline on LF,Emphasized off
7852: # The <u0> capability sets form length
1.11 millert 7853: att5310|att5320|AT&T Model 53210 or 5320 matrix printer,
7854: xhpa, xvpa,
7855: bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10,
7856: orhi#100, orl#12, orvi#72,
7857: cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;,
7858: cr=^M,
7859: csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;,
7860: cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM,
7861: ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r,
7862: lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;,
7863: rshm=\E[m,
7864: scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;,
7865: smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds,
7866: smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m,
7867: u0=\E[%p1%dt, vpa=\E[%p1%dd,
1.1 millert 7868:
7869: # Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL
7870: # The following SET-UP modes are assumed for normal operation:
7871: # CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL
7872: # Other SET-UP modes may be set for operator convenience or communication
7873: # requirements. This termcap description is for the Resident Terminal Mode.
7874: # No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
7875: # The BRL entry also said: UNSAFE :ll=\E[70H:
7876: att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs,
7877: am, xon,
7878: cols#88, it#8, lines#70, vt#3,
7879: bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
7880: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7881: dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
7882: home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
7883: il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J,
7884: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
7885: kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT,
7886: rs1=\Ec, sc=\E7,
7887:
7888: # 5620 terminfo (2.0 or later ROMS with char attributes)
7889: # The following SET-UP modes are assumed for normal operation:
7890: # DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR
7891: # Other SET-UP modes may be set for operator convenience or communication
7892: # requirements. This termcap description is for Resident Terminal Mode. No
7893: # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
7894: # assumptions: <ind> (scroll forward one line) is only done at screen bottom
7895: # Be aware that older versions of the dmd have a firmware bug that affects
7896: # parameter defaulting; for this terminal, the 0 in \E[0m is not optional.
7897: # <msgr> is from an otherwise inferior BRL for this terminal. That entry
7898: # also has <ll>=\E[70H commented out and marked unsafe.
7899: # For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>.
1.11 millert 7900: att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns,
7901: OTbs, am, msgr, npc, xon,
7902: cols#88, it#8, lines#70,
7903: bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H,
7904: cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
7905: dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM,
7906: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@,
7907: ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
7908: indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
7909: kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J,
7910: pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T,
7911: rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7,
7912: sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
7913: att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer,
7914: lines#24, use=att5620,
7915: att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer,
7916: lines#34, use=att5620,
1.1 millert 7917: # 5620 layer running the "S" system's downloaded graphics handler:
7918: att5620-s|tty5620-s|layer|vitty|5620 S layer,
7919: OTbs, OTpt, am,
7920: cols#80, it#8, lines#72,
7921: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
7922: cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED,
7923: el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J,
7924: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
7925: kll=\E[70;1H,
7926:
7927: # Entries for <kf15> thru <kf28> refer to the shifted system pf keys.
7928: #
7929: # Entries for <kf29> thru <kf46> refer to the alternate keypad mode
7930: # keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER
1.11 millert 7931: att605|AT&T 605 80 column 102key keyboard,
7932: am, eo, xon,
7933: cols#80, lines#24, lw#8, nlab#8, wsl#80,
7934: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7935: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
7936: cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C,
7937: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP,
7938: dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
7939: el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
7940: il1=\E[L, ind=^J, invis=\E[8m,
7941: is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017,
7942: kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J,
7943: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
7944: kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq,
7945: kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD,
7946: kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH,
7947: kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ,
7948: kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe,
7949: kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx,
7950: kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv,
7951: kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs,
7952: kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh,
7953: kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@,
7954: kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H,
7955: mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
7956: pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
7957: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
7958: rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
7959: rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016,
7960: smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
7961: tsl=\E7\E[25;%i%p1%dx,
7962: att605-pc|ATT 605 in pc term mode,
7963: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
7964: cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A,
7965: dch1=\E[P, dl1=\E[M, ich1=\E[@, il=\E[L, il1=\E[L, kcbt=\E[Z,
7966: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P,
7967: kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N,
7968: kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T,
7969: kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I,
7970: rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g,
7971: xonc=e,
7972: use=att605,
7973: att605-w|AT&T 605-w 132 column 102 key keyboard,
7974: cols#132, wsl#132,
7975: is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, use=att605,
1.1 millert 7976: # (att610: I added <rmam>/<smam> based on the init string. I also
7977: # added <indn> and <rin> because the BSD file says the att615s have them,
7978: # and the 615 is like a 610 with a big keyboard, and most of their other
7979: # smart terminals support the same sequence -- esr)
1.11 millert 7980: att610|AT&T 610; 80 column; 98key keyboard,
7981: am, eslok, hs, mir, msgr, xenl, xon,
7982: cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
7983: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
7984: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
7985: clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
7986: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
7987: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
7988: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
7989: cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
7990: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
7991: flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
7992: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
7993: indn=\E[%p1%dS, invis=\E[8m,
7994: is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0,
7995: is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
7996: kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
7997: kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
7998: kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg,
7999: kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
8000: kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i,
8001: nel=\EE,
8002: pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
8003: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
8004: ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l,
8005: rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7,
8006: sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8007: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8008: smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx,
8009: att610-w|AT&T 610; 132 column; 98key keyboard,
1.1 millert 8010: cols#132, wsl#132,
1.11 millert 8011: is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att610,
1.1 millert 8012:
1.11 millert 8013: att610-103k|AT&T 610; 80 column; 103key keyboard,
8014: kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
8015: kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
8016: kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
8017: kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
8018: kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
8019: kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
8020: kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
8021: kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx,
8022: khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl,
8023: knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V,
8024: kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq,
8025: krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo,
8026: kslt=\ENI, kspd=\EOp, kund=\EOs,
8027: use=att610,
8028: att610-103k-w|AT&T 610; 132 column; 103key keyboard,
1.1 millert 8029: cols#132, wsl#132,
1.11 millert 8030: is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att610-103k,
8031: att615|AT&T 615; 80 column; 98key keyboard,
8032: kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
8033: kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
8034: kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
8035: kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
8036: kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
8037: kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
8038: kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM,
8039: use=att610,
8040: att615-w|AT&T 615; 132 column; 98key keyboard,
8041: kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE,
8042: kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ,
8043: kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS,
8044: kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS,
8045: kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt,
8046: kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr,
8047: kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM,
8048: use=att610-w,
8049: att615-103k|AT&T 615; 80 column; 103key keyboard,
8050: kLFT=\E[ A, kRIT=\E[ @,
8051: use=att610-103k,
8052: att615-103k-w|AT&T 615; 132 column; 103key keyboard,
8053: kLFT=\E[ A, kRIT=\E[ @,
8054: use=att610-103k-w,
1.1 millert 8055: # (att620: I added <rmam>/<smam> based on the init string and
8056: # <rin>/<indn> from a BSD termcap -- esr)
1.11 millert 8057: att620|AT&T 620; 80 column; 98key keyboard,
8058: am, eslok, hs, mir, msgr, xenl, xon,
8059: cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
8060: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8061: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8062: clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
8063: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8064: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8065: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8066: cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
8067: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8068: flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I,
8069: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
8070: indn=\E[%p1%dS, invis=\E[8m,
8071: is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h,
8072: is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H,
8073: kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8074: kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
8075: kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE,
8076: kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI,
8077: kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR,
8078: kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ,
8079: kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy,
8080: kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf,
8081: kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp,
8082: kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj,
8083: kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H,
8084: mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
8085: pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s,
8086: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m,
8087: ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l,
8088: rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m,
8089: rs2=\Ec\E[?3l, sc=\E7,
8090: sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8091: sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h,
8092: smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m,
8093: tsl=\E7\E[25;%i%p1%dx,
8094: att620-w|AT&T 620; 132 column; 98key keyboard,
8095: cols#132, wsl#132,
8096: is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att620,
8097: att620-103k|AT&T 620; 80 column; 103key keyboard,
8098: kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON,
8099: kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK,
8100: kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH,
8101: kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ,
8102: kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9,
8103: kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn,
8104: kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M,
8105: kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@,
8106: kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@,
8107: kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@,
8108: kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@,
8109: kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi,
8110: kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr,
8111: kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb,
8112: kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB,
8113: ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs,
8114: use=att620,
8115:
8116: att620-103k-w|AT&T 620; 132 column; 103key keyboard,
8117: cols#132, wsl#132,
8118: is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, use=att620-103k,
1.1 millert 8119:
8120: # AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal
8121: # The following SETUP modes are assumed for normal operation:
8122: # Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF
8123: # Font_Size=Large Non-Layers_Window_Cols=80
8124: # Non-Layers_Window_Rows=60
8125: # Other SETUP modes may be set for operator convenience or communication
8126: # requirements. Some capabilities assume a printer attached to the Aux EIA
8127: # port. This termcap description is for the Fixed Non-Layers Window. No
8128: # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
8129: # (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr)
1.11 millert 8130: att630|AT&T 630 windowing terminal,
8131: OTbs, am, da, db, mir, msgr, npc, xon,
8132: cols#80, it#8, lines#60, lm#0,
8133: bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M,
8134: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
8135: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
8136: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
8137: dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K,
8138: el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
8139: il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m,
8140: kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
8141: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M,
8142: kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt,
8143: kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy,
8144: kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~,
8145: kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i,
8146: mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8,
8147: rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m,
8148: rmul=\E[m, rs2=\Ec, sc=\E7,
8149: sgr=\E[0%?%p2%t;4%;%?%p1%p3%|%p4%|%p5%|%t;7%;m,
8150: sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
8151: att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines,
8152: lines#24, use=att630,
1.1 millert 8153:
8154: # This is the att700 entry for 700 native emulation of the AT&T 700
8155: # terminal. Comments are relative to changes from the 605V2 entry and
8156: # att730 on which the entry is based. Comments show the terminfo
8157: # capability name, termcap name, and description.
8158: #
8159: # Here is what's going onm in the init string:
8160: # ESC [ 50;4| set 700 native mode (really is 605)
8161: # x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line)
8162: # ESC [ 53;0| set GenFlow to Xon/Xoff
8163: # ESC [ 8 ;0| set CR on NL
8164: # x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h)
8165: # ESC [ ? 4 l jump scroll
8166: # ESC [ ? 5 l/h video: normal (l); reverse (h)
8167: # ESC [ ?13 l Labels on
8168: # ESC [ ?15 l parity check = no
8169: # ESC [ 13 l monitor mode off
8170: # ESC [ 20 l LF on NL (not CRLF on NL)
8171: # ESC [ ? 7 h autowrap on
8172: # ESC [ 12 h local echo off
8173: # ESC ( B GO = ASCII
8174: # ESC ) 0 G1 = Special Char & Line Drawing
8175: # ESC [ ? 31 l Set 7 bit controls
8176: #
8177: # Note: Most terminals, especially the 600 family use Reverse Video for
8178: # standout mode. DEC also uses reverse video. The VT100 uses bold in addition
8179: # Assume we should stay with reverse video for 70.. However, the 605V2 exits
8180: # standout mode with \E[m (all normal attributes). The 730 entry simply
8181: # exits reverse video which would leave other current attributes intact. It
8182: # was assumed the 730 entry to be more correct so rmso has changed. The
8183: # 605V2 has no sequences to turn individual attributes off, thus its setting
8184: # and the rmso/smso settings from the 730.
8185: #
8186: # Note: For the same reason as above in rmso I changed exit under-score mode
8187: # to specifically turn off underscore, rather than return to all normal
8188: # attributes
8189: #
8190: # Note: The following pkey_xmit is taken from the 605V2 which contained the
8191: # capability as pfxl. It was changed here to pfx since pfxl
8192: # will only compile successfully with Unix 4.0 tic. Also note that pfx only
8193: # allows strings to be parameters and label values must be programmed as
8194: # constant strings. Supposedly the pfxl of Version 4.0 allows both labels
8195: # and strings to be parameters. The 605V2 pfx entry should be examined later
8196: # in this regard. For reference the 730 pfxl entry is shown here for comparison
8197: # 730 pfx entry:
8198: # pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s
8199: # SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s,
8200: #
8201: # (for 4.0 tic)
8202: # pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
8203: #
8204: # (for <4.0 tic)
8205: # pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
8206: #
8207: # From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9
8208: #
8209: # Port1 Interface
8210: #
8211: # modular 10 pin Connector
8212: # Left side Right side
8213: # Pin 1 2 3 4 5 6 7 8 9 10
8214: #
8215: # Key (notch) at bottom
8216: #
8217: # Pin 1 DSR
8218: # 3 DCD
8219: # 4 DTR
8220: # 5 Sig Ground
8221: # 6 RD
8222: # 7 SD
8223: # 8 CTS
8224: # 9 RTS
8225: # 10 Frame Ground
8226: #
8227: # The manual is 189 pages and is loaded with details about the escape codes,
8228: # etc..... Available from AT&T CIC 800-432-6600...
8229: # ask for Document number 999-300-660..
8230: #
1.11 millert 8231: att700|AT&T 700 24x80 column display w/102key keyboard,
1.1 millert 8232: am, eslok, hs, mir, msgr, xenl, xon,
8233: cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80,
8234: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8235: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8236: clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
8237: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8238: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8239: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8240: cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
8241: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8242: enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4,
8243: fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
8244: il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m,
8245: is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017,
8246: is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z,
8247: kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8248: kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp,
8249: kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC,
8250: kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd,
8251: kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP,
8252: kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq,
8253: kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu,
8254: kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu,
8255: kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr,
8256: kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg,
8257: kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
8258: kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H,
8259: mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
8260: pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s,
8261: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
8262: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
8263: rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m,
8264: rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7,
8265: sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8266: sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m,
8267: smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g,
8268: tsl=\E7\E[99;%i%p1%dx,
8269:
8270: # This entry was modified 3/13/90 by JWE.
8271: # fixes include additions of <enacs>, correcting <rep>, and modification
8272: # of <kHOM>. (See comments below)
8273: # att730 has status line of 80 chars
8274: # These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>,
8275: # the <kf25> and up keys are used for shifted system Fkeys
8276: # NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is
8277: # currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1
8278: # and 122 key keyboards, the 730's translation is \E[2J. For consistency
8279: # <kHOM> has been commented out. The user can uncomment <kHOM> if using the
8280: # 102, 102+1, or 122 key keyboards
8281: # kHOM=\E[2J,
8282: # (att730: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 8283: att730|AT&T 730 windowing terminal,
8284: am, da, db, eslok, hs, mir, msgr, npc, xenl, xon,
8285: cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80,
8286: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8287: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l,
8288: clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M,
8289: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
8290: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8291: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8292: cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
8293: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K,
8294: enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8,
8295: home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L,
8296: ind=\ED, invis=\E[8m,
8297: is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B,
8298: is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H,
8299: kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8300: kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr,
8301: kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw,
8302: kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{,
8303: kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD,
8304: kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH,
8305: kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ,
8306: kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf,
8307: kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ,
8308: kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg,
8309: kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H,
8310: kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T,
8311: mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE,
8312: pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s,
8313: pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s,
8314: pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8,
8315: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O,
8316: rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m,
8317: rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7,
8318: sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
8319: sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h,
8320: smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h,
8321: swidm=\E#6, tsl=\E7\E[;%i%p1%dx,
8322: att730-41|730MTG-41|AT&T 730-41 windowing terminal Version,
8323: lines#41, use=att730,
8324: att730-24|730MTG-24|AT&T 730-24 windowing terminal Version,
8325: lines#24, use=att730,
8326: att730r|730MTGr|AT&T 730 rev video windowing terminal Version,
8327: flash=\E[?5l$<200>\E[?5h,
8328: is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, use=att730,
8329: att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version,
8330: lines#41, use=att730r,
8331: att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version,
8332: lines#24, use=att730r,
1.1 millert 8333:
8334: # The following represents the screen layout along with the associated
8335: # bezel buttons for the 5430/pt505 terminal. The "kf" designations do
8336: # not appear on the screen but are shown to reference the bezel buttons.
8337: # The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate
8338: # position relative to the screen.
8339: #
8340: #
8341: #
8342: # +----------------------------------------------------------------+
8343: # | |
8344: # XXXX | kf0 kf24 | XXXX
8345: # | |
8346: # | |
8347: # XXXX | kf1 kf23 | XXXX
8348: # | |
8349: # | |
8350: # XXXX | kf2 kf22 | XXXX
8351: # | |
8352: # | |
8353: # XXXX | kf3 kf21 | XXXX
8354: # | |
8355: # | |
8356: # XXXX | kf4 kf20 | XXXX
8357: # | |
8358: # | |
8359: # XXXX | kf5 kf19 | XXXX
8360: # | |
8361: # | |
8362: # XXXX | kf6 kf18 | XXXX
8363: # | |
8364: # | |
8365: # XXXX | | XXXX
8366: # | |
8367: # | |
8368: # +----------------------------------------------------------------+
8369: #
8370: # XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
8371: #
8372: # Note: XXXX represents the screen buttons
8373: # CMD REDRAW
8374: #
8375: # MAIL
8376: #
8377: # version 1 note:
8378: # The character string sent by key 'kf26' may be user programmable
8379: # to send either \E[16s, or \E[26s.
8380: # The character string sent by key 'krfr' may be user programmable
8381: # to send either \E[17s, or \E[27s.
8382: #
8383: # Depression of the "CMD" key sends \E! (kcmd)
8384: # Depression of the "MAIL" key sends \E[26s (kf26)
8385: # "REDRAW" same as "REFRESH" (krfr)
8386: #
8387: # "kf" functions adds carriage return to output string if terminal is in
8388: # 'new line' mode.
8389: #
8390: # The following are functions not covered in the table above:
8391: #
8392: # Set keyboard character (SKC): \EPn1;Pn2w
8393: # Pn1= 0 Back Space key
8394: # Pn1= 1 Break key
8395: # Pn2= Program char (hex)
8396: #
8397: # Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t
8398: # Pn1= Window number (1-39)
8399: # Pn2-Pn5= Y;X;Y;X coordinates
8400: #
8401: # Screen Selection (SSL): \E[Pnu
8402: # Pn= Window number
8403: #
8404: # Set Terminal Modes (SM): \E[Pnh
8405: # Pn= 3 Graphics mode
8406: # Pn= > Cursor blink
8407: # Pn= < Enter new line mode
8408: # Pn= = Enter reverse insert/replace mode
8409: # Pn= ? Enter no scroll mode
8410: #
8411: # Reset Terminal Mode (RM): \E[Pnl
8412: # Pn= 3 Exit graphics mode
8413: # Pn= > Exit cursor blink
8414: # Pn= < Exit new line mode
8415: # Pn= = Exit reverse insert/replace mode
8416: # Pn= ? Exit no scroll mode
8417: #
8418: # Screen Status Report (SSR): \E[Pnp
8419: # Pn= 0 Request current window number
8420: # Pn= 1 Request current window dimensions
8421: #
8422: # Device Status Report (DSR): \E[6n Request cursor position
8423: #
8424: # Call Status Report (CSR): \E[Pnv
8425: # Pn= 0 Call failed
8426: # Pn= 1 Call successful
8427: #
8428: # Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string
8429: # Pn1= Button number to be loaded
8430: # Pn2= Character count of "string"
8431: # Pn3= Key mode being loaded:
8432: # 0= Unshifted
8433: # 1= Shifted
8434: # 2= Control
8435: # String= Text string (15 chars max)
8436: #
8437: # Screen Number Report (SNR): \E[Pnp
8438: # Pn= Screen number
8439: #
8440: # Screen Dimension Report (SDR): \E[Pn1;Pn2r
8441: # Pn1= Number of rows available in window
8442: # Pn2= Number of columns available in window
8443: #
8444: # Cursor Position Report (CPR): \E[Pn1;Pn2R
8445: # Pn1= "Y" Position of cursor
8446: # Pn2= "X" Position of cursor
8447: #
8448: # Request Answer Back (RAB): \E[c
8449: #
8450: # Answer Back Response (ABR): \E[?;*;30;VSV
8451: # *= 0 No printer available
8452: # *= 2 Printer available
8453: # V= Software version number
8454: # SV= Software sub version number
8455: # (printer-available field not documented in v1)
8456: #
8457: # Screen Alignment Aid: \En
8458: #
8459: # Bell (lower pitch): \E[x
8460: #
8461: # Dial Phone Number: \EPdstring\
8462: # string= Phone number to be dialed
8463: #
8464: # Set Phone Labels: \EPpstring\
8465: # string= Label for phone buttons
8466: #
8467: # Set Clock: \EPchour;minute;second\
8468: #
8469: # Position Clock: \EPsY;X\
8470: # Y= "Y" coordinate
8471: # X= "X" coordinate
8472: #
8473: # Delete Clock: \Epr\
8474: #
8475: # Programming The Function Buttons: \EPfPn;string\
8476: # Pn= Button number (00-06, 18-24)
8477: # (kf00-kf06, kf18-kf24)
8478: # string= Text to sent on button depression
8479: #
8480: # The following in version 2 only:
8481: #
8482: # Request For Local Directory Data: \EPp12;\
8483: #
8484: # Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\
8485: #
8486: # Request for Local Directory Data in print format: \EPp13;\
8487: #
8488: # Enable 'Prt on Line' mode: \022 (DC2)
8489: #
8490: # Disable 'Prt on Line' mode: \024 (DC4)
8491: #
8492:
8493: # 05-Aug-86:
8494: # The following Terminfo entry describes functions which are supported by
8495: # the AT&T 5430/pt505 terminal software version 2 and later.
1.11 millert 8496: att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal,
1.1 millert 8497: am, xon,
8498: cols#80, it#8, lines#24,
1.11 millert 8499: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
8500: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H,
8501: cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
8502: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
8503: cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8504: cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
8505: dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I,
8506: il=\E[%p1%dL, il1=\E[L, ind=^J,
8507: is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l,
8508: kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
8509: kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s,
8510: kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s,
8511: kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s,
8512: kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s,
8513: krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m,
8514: rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m,
8515: rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m,
8516: smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m,
1.1 millert 8517:
8518: # The following Terminfo entry describes functions which are supported by
8519: # the AT&T 5430/pt505 terminal software version 1.
8520: att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines,
1.11 millert 8521: lines#24,
8522: mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505,
8523: tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines,
8524: lines#22, use=att505,
8525: #
8526: #### ------------------ TERMINFO FILE CAN BE SPLIT HERE ---------------------
8527: # This cut mark helps make life less painful for people running ncurses tic
8528: # on machines with relatively little RAM. The file can be broken in half here
8529: # cleanly and compiled in sections -- no `use' references cross this cut
8530: # going forward.
8531: #
1.1 millert 8532:
8533: #### Ampex (Dialogue)
8534: #
8535: # Yes, these are the same people who are better-known for making audio- and
8536: # videotape. I'm told they are located in Redwood City, CA.
8537: #
8538:
8539: # From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981
8540: # (ampex80: some capabilities merged in from SCO's entry -- esr)
8541: ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80,
1.11 millert 8542: OTbs, am, bw, ul,
1.1 millert 8543: cols#80, it#8, lines#24,
1.11 millert 8544: bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J,
8545: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8546: dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1,
8547: ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em,
1.1 millert 8548: smso=\Ej, smul=\El, tbc=\E3,
8549: # This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote:
1.11 millert 8550: ampex175|ampex d175,
8551: am,
8552: cols#80, lines#24,
8553: bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
8554: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
8555: dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J,
8556: is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
8557: kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K,
8558: rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El,
1.1 millert 8559: # No backspace key in the main QWERTY cluster. Fortunately, it has a
8560: # NEWLINE/PAGE key just above RETURN that sends a strange single-character
8561: # code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS
8562: # mode), this key can be used as the erase key; I find I like this. Because
8563: # some people and some systems may not, there is another termcap ("ampex175")
8564: # that suppresses this little eccentricity by omitting the relevant capability.
1.11 millert 8565: ampex175-b|ampex d175 using left arrow for erase,
8566: kbs=^_,
8567: use=ampex175,
1.1 millert 8568: # From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu>
8569: # (ampex210: removed obsolete ":kn#10:" -- esr)
8570: ampex210|a210|ampex a210,
1.11 millert 8571: OTbs, am, hs, xenl,
1.1 millert 8572: cols#80, it#8, lines#24, xmc#1,
8573: cbt=\EI, clear=\E*, cub1=^H, cuf1=^L,
8574: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 8575: dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX,
8576: fsl=\E.2, home=^^, ht=^I, ich1=\EQ,
8577: if=/usr/share/tabset/std, il1=\EE, invis@,
8578: is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H,
8579: kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r,
8580: kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r,
8581: kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^,
8582: tsl=\E.0\Eg\E}\Ef, use=adm+sgr,
1.1 millert 8583: # (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis>
8584: # from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>,
8585: # and moved the padding to be *after* the caps -- esr)
1.11 millert 8586: ampex219|ampex-219|amp219|Ampex with Automargins,
8587: hs, xenl,
8588: cols#80, it#8, lines#24,
8589: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z,
8590: clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M,
8591: csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B,
8592: cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>,
8593: cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>,
8594: el=\E[K$<3>, home=\E[H, ht=^I, ind=^J,
8595: is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
8596: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~,
8597: kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~,
8598: kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H,
8599: rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>,
8600: rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h,
8601: smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>,
8602: ampex219w|ampex-219w|amp219w|Ampex 132 cols,
8603: cols#132, lines#24,
8604: bel=^G, cr=^M, cud1=^J, ind=^J,
8605: is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219,
1.1 millert 8606: # (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr)
8607: ampex232|ampex-232|Ampex Model 232,
8608: am,
8609: cols#80, lines#24, xmc#1,
1.11 millert 8610: cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V,
8611: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
8612: dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET,
8613: flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>,
8614: invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L,
8615: kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
8616: kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
8617: kf9=^AI\r, khome=^^,
8618: use=adm+sgr,
1.1 millert 8619: # (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr)
1.11 millert 8620: ampex232w|Ampex Model 232 / 132 columns,
1.1 millert 8621: cols#132, lines#24,
1.11 millert 8622: is2=\E\034Eg\El, use=ampex232,
1.1 millert 8623:
8624: #### Ann Arbor (aa)
8625: #
8626: # Ann Arbor made dream terminals for hackers -- large screen sizes and huge
8627: # numbers of function keys. At least some used monitors in portrait mode,
8628: # allowing up to 76-character screen heights! They were reachable at:
8629: #
8630: # Ann Arbor Terminals
8631: # 6175 Jackson Road
8632: # Ann Arbor, MI 48103
8633: # (313)-663-8000
8634: #
8635: # But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor
8636: # can't be found on the Web; I fear they're long dead. R.I.P.
8637: #
8638:
8639:
8640: # Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs.
8641: # Highly modified 6/22 by Mike O'Brien.
8642: # split out into several for the various screen sizes by dave-yost@rand
8643: # Modifications made 3/82 by Mark Horton
8644: # Modified by Tom Quarles at UCB for greater efficiency and more diversity
8645: # status line moved to top of screen, <flash> removed 5/82
8646: # Some unknown person at SCO then hacked the init strings to make them more
8647: # efficient.
8648: #
8649: # assumes the following setup:
8650: # A menu: 0000 1010 0001 0000
8651: # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
8652: # C menu: 56 66 0 0 9600 0110 1100
8653: # D menu: 0110 1001 1 0
8654: #
8655: # Briefly, the settings are for the following modes:
8656: # (values are for bit set/clear with * indicating our preference
8657: # and the value used to test these termcaps)
8658: # Note that many of these settings are irrelevent to the terminfo
8659: # and are just set to the default mode of the terminal as shipped
8660: # by the factory.
8661: #
8662: # A menu: 0000 1010 0001 0000
8663: # Block/underline cursor*
8664: # blinking/nonblinking cursor*
8665: # key click/no key click*
8666: # bell/no bell at column 72*
8667: #
8668: # key pad is cursor control*/key pad is numeric
8669: # return and line feed/return for <cr> key *
8670: # repeat after .5 sec*/no repeat
8671: # repeat at 25/15 chars per sec. *
8672: #
8673: # hold data until pause pressed/process data unless pause pressed*
8674: # slow scroll/no slow scroll*
8675: # Hold in area/don't hold in area*
8676: # functions keys have default*/function keys disabled on powerup
8677: #
8678: # show/don't show position of cursor during page transmit*
8679: # unused
8680: # unused
8681: # unused
8682: #
8683: # B menu: 9600 0100 1000 0000 0000 1000 0000 17 19
8684: # Baud rate (9600*)
8685: #
8686: # 2 bits of parity - 00=odd,01=even*,10=space,11=mark
8687: # 1 stop bit*/2 stop bits
8688: # parity error detection off*/on
8689: #
8690: # keyboard local/on line*
8691: # half/full duplex*
8692: # disable/do not disable keyboard after data transmission*
8693: #
8694: # transmit entire page/stop transmission at cursor*
8695: # transfer/do not transfer protected characters*
8696: # transmit all characters/transmit only selected characters*
8697: # transmit all selected areas/transmit only 1 selected area*
8698: #
8699: # transmit/do not transmit line separators to host*
8700: # transmit/do not transmit page tab stops tabs to host*
8701: # transmit/do not transmit column tab stop tabs to host*
8702: # transmit/do not transmit graphics control (underline,inverse..)*
8703: #
8704: # enable*/disable auto XON/XOFF control
8705: # require/do not require receipt of a DC1 from host after each LF*
8706: # pause key acts as a meta key/pause key is pause*
8707: # unused
8708: #
8709: # unused
8710: # unused
8711: # unused
8712: # unused
8713: #
8714: # XON character (17*)
8715: # XOFF character (19*)
8716: #
8717: # C menu: 56 66 0 0 9600 0110 1100
8718: # number of lines to print data on (printer) (56*)
8719: #
8720: # number of lines on a sheet of paper (printer) (66*)
8721: #
8722: # left margin (printer) (0*)
8723: #
8724: # number of pad chars on new line to printer (0*)
8725: #
8726: # printer baud rate (9600*)
8727: #
8728: # printer parity: 00=odd,01=even*,10=space,11=mark
8729: # printer stop bits: 2*/1
8730: # print/do not print guarded areas*
8731: #
8732: # new line is: 01=LF,10=CR,11=CRLF*
8733: # unused
8734: # unused
8735: #
8736: # D menu: 0110 1001 1 0
8737: # LF is newline/LF is down one line, same column*
8738: # wrap to preceding line if move left from col 1*/don't wrap
8739: # wrap to next line if move right from col 80*/don't wrap
8740: # backspace is/is not destructive*
8741: #
8742: # display*/ignore DEL character
8743: # display will not/will scroll*
8744: # page/column tab stops*
8745: # erase everything*/erase unprotected only
8746: #
8747: # editing extent: 0=display,1=line*,2=field,3=area
8748: #
8749: # unused
8750: #
8751:
1.11 millert 8752: annarbor4080|aa4080|ann arbor 4080,
8753: OTbs, am,
8754: cols#80, lines#40,
8755: bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_,
8756: cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c,
8757: cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H,
8758: kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P,
1.1 millert 8759:
8760: # Strange Ann Arbor terminal from BRL
8761: aas1901|Ann Arbor K4080 w/S1901 mod,
8762: am,
8763: cols#80, lines#40,
8764: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N,
8765: home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c,
8766: nel=^M^J,
8767:
8768: # If you're using the GNU termcap library, add
8769: # :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp:
8770: # to these capabilities. This is the nonstandard GNU termcap scrolling
8771: # capability, arguments are:
8772: # 1. Total number of lines on the screen.
8773: # 2. Number of lines above desired scroll region.
8774: # 3. Number of lines below (outside of) desired scroll region.
8775: # 4. Total number of lines on the screen, the same as the first parameter.
8776: # The generic Ann Arbor entry is the only one that uses this.
1.11 millert 8777: aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly),
8778: OTbs, am, km, mc5i, mir, xon,
8779: cols#80, it#8,
8780: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
8781: clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H,
8782: cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
8783: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
8784: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
8785: el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I,
8786: hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL,
8787: il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8,
8788: is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z,
8789: kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
8790: kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK,
8791: kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP,
8792: kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT,
8793: kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC,
8794: kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI,
8795: khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i,
8796: mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8,
8797: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
8798: rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\,
8799: rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7,
8800: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
8801: sgr0=\E[m,
8802: smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\,
8803: smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
8804: vpa=\E[%p1%{1}%+%dd,
8805:
8806: aaa+rv|ann arbor ambassador in reverse video,
8807: blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m,
8808: is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
8809: rs1=\E[H\E[7m\E[J$<156>,
8810: sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
8811: sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m,
1.1 millert 8812: # Ambassador with the DEC option, for partial vt100 compatibility.
1.11 millert 8813: aaa+dec|ann arbor ambassador in dec vt100 mode,
8814: acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}},
8815: csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N,
8816: sgr=\E[%?%p1%p3%|%!%t7;%;%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;,
8817: smacs=^O,
8818: aaa-18|ann arbor ambassador/18 lines,
8819: lines#18,
8820: is2=\E7\E[60;0;0;18p\E8,
8821: rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p, use=aaa+unk,
8822: aaa-18-rv|ann arbor ambassador/18 lines+reverse video,
8823: use=aaa+rv, use=aaa-18,
8824: aaa-20|ann arbor ambassador/20 lines,
8825: lines#20,
8826: is2=\E7\E[60;0;0;20p\E8,
8827: rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p, use=aaa+unk,
8828: aaa-22|ann arbor ambassador/22 lines,
8829: lines#22,
8830: is2=\E7\E[60;0;0;22p\E8,
8831: rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p, use=aaa+unk,
8832: aaa-24|ann arbor ambassador/24 lines,
8833: lines#24,
8834: is2=\E7\E[60;0;0;24p\E8,
8835: rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p, use=aaa+unk,
8836: aaa-24-rv|ann arbor ambassador/24 lines+reverse video,
8837: use=aaa+rv, use=aaa-24,
8838: aaa-26|ann arbor ambassador/26 lines,
8839: lines#26,
8840: is2=\E7\E[60;0;0;26p\E8,
8841: rmcup=\E[60;0;0;26p\E[26;1H\E[K,
8842: smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk,
8843: aaa-28|ann arbor ambassador/28 lines,
8844: lines#28,
8845: is2=\E7\E[60;0;0;28p\E8,
8846: rmcup=\E[60;0;0;28p\E[28;1H\E[K,
8847: smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk,
8848: aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status,
8849: eslok, hs,
8850: lines#29,
8851: dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K,
8852: fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8,
8853: rmcup=\E[60;1;0;30p\E[29;1H\E[K,
8854: smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K,
8855: tsl=\E[>51h\E[1;%p1%dH\E[2K,
8856: use=aaa+unk,
8857: aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video,
8858: use=aaa+rv, use=aaa-30-s,
8859: aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context,
8860: rmcup=\E[60;1;0;30p\E[59;1H\E[K,
8861: smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s,
8862: aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video,
8863: rmcup=\E[60;1;0;30p\E[59;1H\E[K,
8864: smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv,
8865: aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines,
8866: lines#30,
8867: is2=\E7\E[60;0;0;30p\E8,
8868: rmcup=\E[60;0;0;30p\E[30;1H\E[K,
8869: smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk,
8870: aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video,
8871: use=aaa+rv, use=aaa-30,
8872: aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context,
8873: rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
8874: use=aaa-30,
8875: aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context,
8876: rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p,
8877: use=aaa+rv, use=aaa-30,
8878: aaa-36|ann arbor ambassador/36 lines,
8879: lines#36,
8880: is2=\E7\E[60;0;0;36p\E8,
8881: rmcup=\E[60;0;0;36p\E[36;1H\E[K,
8882: smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk,
8883: aaa-36-rv|ann arbor ambassador/36 lines+reverse video,
8884: use=aaa+rv, use=aaa-36,
8885: aaa-40|ann arbor ambassador/40 lines,
8886: lines#40,
8887: is2=\E7\E[60;0;0;40p\E8,
8888: rmcup=\E[60;0;0;40p\E[40;1H\E[K,
8889: smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk,
8890: aaa-40-rv|ann arbor ambassador/40 lines+reverse video,
8891: use=aaa+rv, use=aaa-40,
8892: aaa-48|ann arbor ambassador/48 lines,
8893: lines#48,
8894: is2=\E7\E[60;0;0;48p\E8,
8895: rmcup=\E[60;0;0;48p\E[48;1H\E[K,
8896: smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk,
8897: aaa-48-rv|ann arbor ambassador/48 lines+reverse video,
8898: use=aaa+rv, use=aaa-48,
8899: aaa-60-s|ann arbor ambassador/59 lines+status,
8900: eslok, hs,
8901: lines#59,
8902: dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K,
8903: fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8,
8904: tsl=\E[>51h\E[1;%p1%dH\E[2K,
8905: use=aaa+unk,
8906: aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video,
8907: use=aaa+rv, use=aaa-60-s,
8908: aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video,
8909: use=aaa+dec, use=aaa+rv, use=aaa-60-s,
8910: aaa-60|ann arbor ambassador/60 lines,
8911: lines#60,
8912: is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, use=aaa+unk,
8913: aaa-60-rv|ann arbor ambassador/60 lines+reverse video,
8914: use=aaa+rv, use=aaa-60,
8915: aaa-db|ann arbor ambassador 30/destructive backspace,
8916: OTbs@,
8917: cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30,
8918:
8919: guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols,
8920: lines#33,
8921: flash=\E[>59h$<100>\E[>59l,
8922: is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l,
8923: rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p,
8924: use=aaa+unk,
8925: guru+rv|guru changes for reverse video,
8926: flash=\E[>59l$<100>\E[>59h, is3=\E[>59h,
8927: guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video,
8928: use=guru+rv, use=guru-33,
8929: guru+s|guru status line,
8930: eslok, hs,
8931: dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l,
1.1 millert 8932: rmcup=\E[255;1p\E[255;1H\E[K, smcup=,
1.11 millert 8933: tsl=\E[>51h\E[1;%p1%dH\E[2K,
8934: guru-nctxt|guru with no saved context,
8935: smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru,
8936: guru-s|guru-33-s|ann arbor guru/33 lines+status,
8937: lines#32,
8938: is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J,
8939: smcup=\E[33;1p\E[255;1H\E[K,
8940: use=guru+s, use=guru+unk,
8941: guru-24|ann arbor guru 24 lines,
8942: cols#80, lines#24,
8943: is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p, use=guru+unk,
8944: guru-44|ann arbor guru 44 lines,
8945: cols#97, lines#44,
8946: is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p, use=guru+unk,
8947: guru-44-s|ann arbor guru/44 lines+status,
8948: lines#43,
8949: is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J,
8950: smcup=\E[44;1p\E[255;1H\E[K,
8951: use=guru+s, use=guru+unk,
8952: guru-76|guru with 76 lines by 89 cols,
8953: cols#89, lines#76,
8954: is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p, use=guru+unk,
8955: guru-76-s|ann arbor guru/76 lines+status,
8956: cols#89, lines#75,
8957: is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J,
8958: smcup=\E[76;1p\E[255;1H\E[K,
8959: use=guru+s, use=guru+unk,
8960: guru-76-lp|guru-lp|guru with page bigger than line printer,
8961: cols#134, lines#76,
8962: is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p, use=guru+unk,
8963: guru-76-w|guru 76 lines by 178 cols,
8964: cols#178, lines#76,
8965: is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p, use=guru+unk,
8966: guru-76-w-s|ann arbor guru/76 lines+status+wide,
8967: cols#178, lines#75,
8968: is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J,
8969: smcup=\E[76;1p\E[255;1H\E[K,
8970: use=guru+s, use=guru+unk,
8971: guru-76-wm|guru 76 lines by 178 cols with 255 cols memory,
8972: cols#178, lines#76,
8973: is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p, use=guru+unk,
8974: aaa-rv-unk|ann arbor unknown type,
8975: lh#0, lw#0, nlab#0,
8976: blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m,
8977: is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m,
8978: rs1=\E[H\E[7m\E[J,
8979: sgr=\E[%?%p1%!%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m,
8980: sgr0=\E[7m, smso=\E[m, smul=\E[4;7m,
1.1 millert 8981:
8982: #### Applied Digital Data Systems (adds)
8983: #
8984: # ADDS itself is long gone. ADDS was bought by NCR, and the same group made
8985: # ADDS and NCR terminals. When AT&T and NCR merged, the engineering for
8986: # terminals was merged again. Then AT&T sold the terminal business to
8987: # SunRiver, which later changed its name to Boundless Technologies. The
8988: # engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there
8989: # as of early 1995) are at:
8990: #
8991: # Boundless Technologies
8992: # 100 Marcus Boulevard
8993: # Hauppauge, NY 11788-3762
8994: # Vox: (800)-231-5445
8995: # Fax: (516)-342-7378
8996: # Web: http://boundless.com
8997: #
8998: # Their voice mail used to describe the place as "SunRiver (formerly ADDS)".
8999: # In 1995 Boundless acquired DEC's terminals business.
9000: #
9001:
9002: # Regent: lowest common denominator, works on all regents.
9003: # (regent: renamed ":bc:" to ":le:" -- esr)
9004: regent|Adds Regent Series,
9005: OTbs, am,
9006: cols#80, lines#24,
9007: bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z,
9008: home=\EY\s\s, ind=^J, ll=^A,
9009: # Regent 100 has a bug where if computer sends escape when user is holding
9010: # down shift key it gets confused, so we avoid escape.
9011: regent100|Adds Regent 100,
9012: xmc#1,
1.11 millert 9013: bel=^G,
9014: cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
9015: kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r,
9016: kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3,
9017: lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@,
9018: sgr0=\E0@, smso=\E0P, smul=\E0`,
9019: use=regent,
1.1 millert 9020: regent20|Adds Regent 20,
1.11 millert 9021: bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, use=regent,
1.1 millert 9022: regent25|Adds Regent 25,
1.11 millert 9023: bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, use=regent20,
1.1 millert 9024: regent40|Adds Regent 40,
9025: xmc#1,
9026: bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r,
1.11 millert 9027: kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
9028: kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6,
9029: lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P,
9030: smul=\E0`,
9031: use=regent25,
1.1 millert 9032: regent40+|Adds Regent 40+,
1.11 millert 9033: is2=\EB, use=regent40,
1.1 millert 9034: regent60|regent200|Adds Regent 60,
9035: dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF,
1.11 millert 9036: rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV,
9037: use=regent40+,
1.1 millert 9038: # From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981
9039: # (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr)
9040: viewpoint|addsviewpoint|adds viewpoint,
1.11 millert 9041: OTbs, am,
1.1 millert 9042: cols#80, lines#24,
1.11 millert 9043: bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J,
9044: cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
9045: cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>,
9046: ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
9047: kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A,
1.1 millert 9048: rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N,
9049: # Some viewpoints have bad ROMs that foo up on ^O
1.11 millert 9050: screwpoint|adds viewpoint with ^O bug,
9051: cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint,
1.1 millert 9052:
9053: # From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92
9054: # The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs.
9055: # Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000,
9056: # underline=01100000, rev=01010000, blink=01000010,dim=01000001,
9057: # invis=01000100 and %c is the logical or of desired attributes.
9058: # There is also a `tag bit' enabling attributes, set by \E) and unset by \E(.
9059: vp3a+|viewpoint3a+|adds viewpoint 3a+,
9060: am, bw,
9061: cols#80, it#8, lines#24,
1.11 millert 9062: civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M, cub1=^H, cud1=^J,
9063: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
9064: ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, kbs=^H, kcub1=^H,
9065: kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, nel=^M^J, rmso=\E(,
9066: sgr=\E0%{64}%?%p1%tQ%|%;%?%p2%t%{96}%|%;%?%p3%tP%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%?%p7%tD%|%;%c\E),
1.1 millert 9067: sgr0=\E(, smso=\E0Q\E),
9068: vp60|viewpoint60|addsvp60|adds viewpoint60,
1.11 millert 9069: use=regent40,
1.1 millert 9070: #
9071: # adds viewpoint 90 - from cornell
9072: # Note: emacs sends ei occasionally to insure the terminal is out of
9073: # insert mode. This unfortunately puts the viewpoint90 IN insert
9074: # mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also,
9075: # - :ei=:im=: must be present in the termcap translation.)
9076: # - <xhp> indicates glitch that attributes stick to location
9077: # - <msgr> means it's safe to move in standout mode
9078: # - <clear=\EG\Ek>: clears screen and visual attributes without affecting
9079: # the status line
9080: # Function key and label capabilities merged in from SCO.
9081: vp90|viewpoint90|adds viewpoint 90,
1.11 millert 9082: OTbs, bw, msgr, xhp,
1.1 millert 9083: cols#80, lines#24,
1.11 millert 9084: clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F,
1.1 millert 9085: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE,
9086: dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I,
9087: ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J,
1.11 millert 9088: kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r,
9089: kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r,
9090: kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2,
9091: lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9,
9092: lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV,
9093: sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV,
1.1 millert 9094: # Note: if return acts weird on a980, check internal switch #2
9095: # on the top chip on the CONTROL pc board.
9096: adds980|a980|adds consul 980,
1.11 millert 9097: OTbs, am,
1.1 millert 9098: cols#80, lines#24,
1.11 millert 9099: bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J,
9100: cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d,
1.1 millert 9101: dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1,
1.11 millert 9102: kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8,
9103: kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N,
1.9 millert 9104:
1.1 millert 9105: #### C. Itoh Electronics
9106: #
9107: # As of 1995 these people no longer make terminals (they're still in the
9108: # printer business). Their terminals were all clones of the DEC VT series.
9109: # They're located in Orange County, CA.
9110: #
9111:
9112: # CIT 80 - vt-52 emulator, the termcap has been modified to remove
9113: # the delay times and do an auto tab set rather than the indirect
9114: # file used in vt100.
9115: cit80|cit-80|citoh 80,
1.11 millert 9116: OTbs, am,
1.1 millert 9117: cols#80, lines#24,
1.11 millert 9118: clear=\E[H\EJ, cr=^M, cub1=^H, cuf1=\E[C,
9119: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L,
9120: ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
9121: kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=,
1.1 millert 9122: # From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985
9123: # (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr)
9124: cit101|citc|C.itoh fast vt100,
1.11 millert 9125: OTbs, am, xenl,
1.1 millert 9126: cols#80, lines#24,
9127: bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cuf1=\E[C,
9128: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E7\E[U,
9129: dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K,
1.11 millert 9130: flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L,
1.1 millert 9131: is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g,
9132: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
9133: rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
1.11 millert 9134: sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m,
9135: smul=\E[4m,
1.1 millert 9136: # CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL
9137: # The following termcap entry was created from the Callan cd100 entry. The
9138: # last two lines (with the capabilities in caps) are used by RM-cobol to allow
9139: # full selection of combinations of reverse video, underline, and blink.
9140: # (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\
9141: # f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\
9142: # :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr)
9143: cit101e|C. Itoh CIT-101e,
9144: OTbs, OTpt, am, mir, msgr,
9145: cols#80, it#8, lines#24,
1.11 millert 9146: acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr,
9147: cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A,
1.1 millert 9148: cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, ed=\E[J,
9149: el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L,
1.11 millert 9150: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT,
9151: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl,
9152: kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l,
9153: rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h,
9154: smkx=\E=, smso=\E[7m, smul=\E[4m,
1.1 millert 9155: # From: David S. Lawyer, June 1997:
9156: # The CIT 101-e was made in Japan in 1983-4 and imported by CIE
9157: # Terminals in Irvine, CA. It was part of CITOH Electronics. In the
9158: # late 1980's CIT Terminals went out of business.
9159: # There is no need to use the initialization string is=... (by invoking
9160: # tset or setterm etc.) provided that the terminal has been manually set
9161: # up (and the setup saved with ^S) to be compatible with this termcap. To be
9162: # compatible it should be in ANSI mode (not VT52). A set-up that
9163: # works is to set all the manually setable stuff to factory defaults
9164: # by pressing ^D in set-up mode. Then increse the brighness with the
9165: # up-arrow key since the factory default will likely be dim on an old
9166: # terminal. Then change any options you want (provided that they are
9167: # compatible with the termcap). For my terminal I set: Screen
9168: # Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver:
9169: # on. I also set up mine for parity (but you may not need it). Then
9170: # save the setup with ^S.
9171: # (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr)
9172: cit101e-rv|Citoh CIT-101e (sets reverse video),
9173: am, eo, mir, msgr, xenl, xon,
9174: cols#80, it#8, lines#24,
1.11 millert 9175: OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
9176: civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M,
9177: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9178: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
9179: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9180: cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
9181: dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>,
9182: home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@,
9183: ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS,
1.1 millert 9184: is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H,
1.11 millert 9185: kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9186: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8,
9187: rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l,
9188: rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7,
9189: sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h,
9190: smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR,
1.1 millert 9191: u7=\E[6n, u8=\E[?6c, u9=\E[c,
9192: cit101e-n|CIT-101e w/o am,
9193: am@,
9194: cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
9195: cit101e-132|CIT-101e with 132 cols,
9196: cols#132,
9197: kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
9198: cit101e-n132|CIT-101e with 132 cols w/o am,
9199: am@,
9200: cols#132,
9201: cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, use=cit101e,
9202: # CIE Terminals CIT-500 from BRL
9203: # The following SET-UP modes are assumed for normal operation:
9204: # GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF
9205: # AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES
9206: # DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF
9207: # Other SET-UP modes may be set for operator convenience or communication
9208: # requirements.
9209: # Hardware tabs are assumed to be set every 8 columns; they can be set up
9210: # by the "reset", "tset", or "tabs" utilities. No delays are specified; use
9211: # "stty ixon -ixany" to enable DC3/DC1 flow control!
9212: # (cit500: I added <rmam>/<smam> based on the init string -- esr)
9213: cit500|CIE Terminals CIT-500,
9214: OTbs, OTpt, mir, msgr, xon,
9215: OTkn#10, cols#80, it#8, lines#64, vt#3,
9216: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
9217: clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr,
9218: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
9219: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
9220: cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9221: ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
1.11 millert 9222: il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD,
9223: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M,
9224: ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
9225: kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ,
9226: khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1,
9227: lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18,
9228: lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m,
9229: ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>,
1.1 millert 9230: rmso=\E[m, rmul=\E[m,
9231: rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>,
1.11 millert 9232: sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h,
9233: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
1.1 millert 9234:
9235: # C. Itoh printers begin here
1.11 millert 9236: citoh|ci8510|8510|c.itoh 8510a,
9237: cols#80, it#8,
9238: bold=\E!, cub1@,
9239: is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073.,
9240: rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY,
9241: smul=\EX,
9242: use=lpr,
9243: citoh-pica|citoh in pica,
9244: is1=\EN, use=citoh,
9245: citoh-elite|citoh in elite,
9246: cols#96,
9247: is1=\EE,
9248: is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089., use=citoh,
9249: citoh-comp|citoh in compressed,
9250: cols#136,
9251: is1=\EQ,
9252: is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129., use=citoh,
1.1 millert 9253: # citoh has infinite cols because we don't want lp ever inserting \n\t**.
1.11 millert 9254: citoh-prop|citoh-ps|ips|citoh in proportional spacing mode,
9255: cols#32767,
9256: is1=\EP, use=citoh,
9257: citoh-6lpi|citoh in 6 lines per inch mode,
9258: is3=\EA, use=citoh,
9259: citoh-8lpi|citoh in 8 lines per inch mode,
9260: lines#88,
9261: is3=\EB, use=citoh,
1.1 millert 9262:
9263: #### Control Data (cdc)
9264: #
9265:
9266: cdc456|cdc 456 terminal,
1.11 millert 9267: OTbs, am,
1.1 millert 9268: cols#80, lines#24,
9269: bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
1.11 millert 9270: cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X,
9271: el=^V, home=^Y, il1=\EL, ind=^J,
1.1 millert 9272:
9273: # Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick)
9274: cdc721|CDC Viking,
9275: OTbs, am,
9276: cols#80, lines#24,
1.11 millert 9277: clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
9278: cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
1.1 millert 9279: kcuu1=^W, khome=^Y,
9280: cdc721ll|CDC Vikingll,
9281: OTbs, am,
9282: cols#132, lines#24,
1.11 millert 9283: clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c,
9284: cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I,
1.1 millert 9285: kcuu1=^W, khome=^Y,
9286: # (cdc752: the BRL entry had :ll=\E1 ^Z: commented out
9287: cdc752|CDC 752,
9288: OTbs, am, bw, xhp,
9289: cols#80, lines#24,
9290: bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
9291: cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V,
1.11 millert 9292: home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017,
1.1 millert 9293: # CDC 756
9294: # The following switch/key settings are assumed for normal operation:
9295: # 96 chars SCROLL FULL duplex not BLOCK
9296: # Other switches may be set according to communication requirements.
9297: # Insert/delete-character cannot be used, as the whole display is affected.
9298: # "so" & "se" are commented out until jove handles "sg" correctly.
9299: cdc756|CDC 756,
9300: OTbs, am, bw,
9301: OTkn#10, cols#80, lines#24,
9302: bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
9303: cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z,
1.11 millert 9304: dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J,
9305: kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI,
9306: kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED,
9307: kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y,
9308: khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4,
9309: lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z,
1.1 millert 9310: rs1=\031\030\002\003\017,
9311: #
9312: # CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL.
9313: #
9314: # Part of the long initialization string defines the "DOWN" key to the left
9315: # of the tab key to send an ESC. The real ESC key is positioned way out
9316: # in right field.
9317: #
9318: # The termcap won't work in 132 column mode due to the way it it moves the
9319: # cursor. Termcap doesn't have the capability (as far as I could tell) to
9320: # handle the 721 in 132 column mode.
9321: #
9322: # (cdc721: changed :ri: to :sr: -- esr)
1.11 millert 9323: cdc721-esc|Control Data 721,
1.1 millert 9324: OTbs, OTpt, am, bw, msgr, xon,
9325: OTkn#10, cols#80, it#8, lines#30,
9326: bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z,
9327: cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W,
1.11 millert 9328: dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW,
9329: ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[,
1.1 millert 9330: is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o,
1.11 millert 9331: kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q,
9332: kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x,
9333: kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D,
9334: ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^],
9335: sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk,
9336: smso=^^D, smul=^\, tbc=^^^RY,
1.1 millert 9337:
9338: #### Getronics
9339: #
9340: # Getronics is a Dutch electronics company that at one time was called
9341: # `Geveke' and made async terminals; but (according to the company itself!)
9342: # they've lost all their documentation on the command set. The hardware
9343: # documentation suggests the terminals were actually manufactured by a
9344: # Taiwanese electronics company named Cal-Comp. There are known
9345: # to have been at least two models, the 33 and the 50.
9346: #
9347:
9348: # The 50 seems to be a top end vt220 clone, with the addition of a higher
9349: # screen resolution, a larger screen, at least 1 page of memory above and
9350: # below the screen, apparently pages of memory right and left of the screen
9351: # which can be panned, and about 75 function keys (15 function keys x normal,
9352: # shift, control, func A, func B). It also has more setup possibilities than
9353: # the vt220. The monitor case is dated November 1978 and the keyboard case is
9354: # May 1982.
9355: #
9356: # The vt100 emulation works as is. The entry below describes the rather
9357: # non-conformant (but more featureful) ANSI mode.
9358: #
9359: # From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995
9360: visa50|geveke visa 50 terminal in ansi 80 character mode,
9361: bw, mir, msgr,
9362: cols#80, lines#25,
1.11 millert 9363: acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G,
9364: blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M,
9365: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
9366: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
9367: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9368: dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM,
9369: dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H,
9370: hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@,
9371: il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m,
1.1 millert 9372: is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h,
1.11 millert 9373: ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS,
9374: kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177,
9375: kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002,
9376: kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007,
9377: kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char,
9378: lf3=A insert line, lf4=A delete line, lf5=A clear,
9379: lf6=A ce of/cf gn, lf7=A print, lf8=A on-line,
9380: lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l,
9381: rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m,
9382: rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h,
9383: smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g,
1.1 millert 9384: vpa=\E[%i%p1%dd,
9385:
9386: #### Human Designed Systems (Concept)
9387: #
9388: # Human Designed Systems
9389: # 400 Fehley Drive
9390: # King of Prussia, PA 19406
9391: # Vox: (610)-277-8300
9392: # Fax: (610)-275-5739
9393: # Net: support@hds.com
9394: #
9395: # John Martin <john@hds.com> is their termcap expert. They're mostly out of
9396: # the character-terminal business now (1995) and making X terminals. In
9397: # particular, the whole `Concept' line described here was discontinued long
9398: # ago.
9399: #
9400:
9401: # From: <vax135!hpk> Sat Jun 27 07:41:20 1981
9402: # Extensive changes to c108 by arpavax:eric Feb 1982
9403: # Some unknown person at SCO then translated it to terminfo.
9404: #
9405: # There seem to be a number of different versions of the C108 PROMS
9406: # (with bug fixes in its Z-80 program).
9407: #
9408: # The first one that we had would lock out the keyboard of you
9409: # sent lots of short lines (like /usr/dict/words) at 9600 baud.
9410: # Try that on your C108 and see if it sends a ^S when you type it.
9411: # If so, you have an old version of the PROMs.
9412: #
9413: # You should configure the C108 to send ^S/^Q before running this.
9414: # It is much faster (at 9600 baud) than the c100 because the delays
9415: # are not fixed.
9416: # new status line display entries for c108-8p:
9417: # <is3> - init str #3 - setup term for status display -
9418: # set programmer mode, select window 2, define window at last
9419: # line of memory, set bkgnd stat mesg there, select window 0.
9420: #
9421: # <tsl> - to status line - select window 2, home cursor, erase to
9422: # end-of-window, 1/2 bright on, goto(line#0, col#?)
9423: #
9424: # <fsl> - from status line - 1/2 bright off, select window 0
9425: #
9426: # <dsl> - disable status display - set bkgnd status mesg with
9427: # illegal window #
9428: #
9429: # There are probably more function keys that should be added but
9430: # I don't know what they are.
9431: #
9432: # No delays needed on c108 because of ^S/^Q handshaking
9433: #
1.11 millert 9434: c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages,
9435: is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n,
9436: rmcup=\Ev \001\177p\Ep\r\n,
9437: use=c108-4p,
9438: c108-4p|concept108-4p|concept 108 w/4 pages,
9439: OTbs, eslok, hs, xon,
9440: pb@,
9441: acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M,
9442: cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c,
9443: cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s,
9444: ind=^J, is1=\EK\E!\E F,
9445: is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n,
9446: rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!,
9447: smcup=\EU\Ev 8p\Ep\r\E\025,
9448: tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100,
9449: c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video,
9450: rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r,
9451: use=c108-rv-4p,
9452: c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video,
9453: flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE,
1.1 millert 9454: use=c108-4p,
1.11 millert 9455: c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode,
9456: cols#132,
9457: is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n,
9458: smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p,
1.1 millert 9459:
9460: # Concept 100:
9461: # These have only window relative cursor addressing, not screen
9462: # relative. To get it to work right here, smcup/rmcup (which
9463: # were invented for the concept) lock you into a one page
9464: # window for screen style programs.
9465: #
9466: # To get out of the one page window, we use a clever trick:
9467: # we set the window size to zero ("\Ev " in rmcup) which the
9468: # terminal recognizes as an error and resets the window to all
9469: # of memory.
9470: #
9471: # This trick works on c100 but does not on c108, sigh.
9472: #
9473: # Some tty drivers use cr3 for concept, others use nl3, hence
9474: # the delays on cr and ind below. This padding is only needed at
9475: # 9600 baud and up. One or the other is commented out depending on
9476: # local conventions.
9477: #
9478: # 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe
9479: # less than 6 but more than 2 will work.
9480: #
9481: # Note: can't use function keys f7-f10 because they are
9482: # indistinguishable from arrow keys (!), also, del char and
9483: # clear eol use xon/xoff so they probably won't work very well.
9484: #
9485: # Also note that we don't define insrt/del char/delline/eop/send
9486: # because they don't transmit unless we reset them - I figured
9487: # it was a bad idea to clobber their definitions.
9488: #
9489: # The <mc5> sequence changes the escape character to ^^ so that
9490: # escapes will be passed through to the printer. Only trouble
9491: # is that ^^ won't be - ^^ was chosen to be unlikely.
9492: # Unfortunately, if you're sending raster bits through to be
9493: # plotted, any character you choose will be likely, so we lose.
9494: #
9495: # \EQ"\EY(^W (send anything from printer to host, for xon/xoff)
9496: # cannot be # in is2 because it will hang a c100 with no printer
9497: # if sent twice.
1.11 millert 9498: c100|concept100|concept|c104|c100-4p|hds concept 100,
9499: OTbs, am, eo, mir, ul, xenl,
9500: cols#80, lines#24, pb#9600, vt#8,
9501: bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r,
9502: cub1=^H, cud1=^J, cuf1=\E=,
9503: cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;,
9504: dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>,
9505: ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK,
9506: ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>,
9507: is1=\EK,
9508: is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c,
9509: is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_,
9510: kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q,
9511: kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7,
9512: kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?,
9513: khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E.,
9514: kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027,
9515: mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI,
9516: rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED,
9517: rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex,
9518: rmso=\Ed, rmul=\Eg, sgr0=\EN@,
9519: smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX,
9520: smso=\ED, smul=\EG,
9521: c100-rv|c100-rv-4p|concept100-rv|c100 rev video,
9522: cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee,
9523: smso=\EE,
9524: use=c100,
9525: oc100|oconcept|c100-1p|old 1 page concept 100,
9526: in,
9527: is3@, use=c100,
1.1 millert 9528:
9529: # From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996.
9530: # Lots of notes, originally inline, but ncurses doesn't grok that.
9531: #
9532: # am: not available in power on mode, but turned on with \E[=107;207h in
9533: # is2=. Also, \E=124l in is2= could have been used to prevent needing
9534: # to specify xenl:, but that would have rendered the last space on the
9535: # last line useless.
9536: # bw: Not available in power on mode, but turned on with \E[=107;207h in
9537: # is2=.
9538: # clear: Could be done with \E[2J alone, except that vi (and probably most
9539: # other programs) assume that this also homes the cursor.
9540: # dsl: Go to window 2, go to the beginning of the line, use a line feed to
9541: # scroll the window, and go back to window 1.
9542: # is2: the string may cause a warning to be issued by tic that it
9543: # found a very long line and that it suspects that a comma is missing
9544: # somewhere. This warning can be ignored (unless it comes up more than
9545: # once). The initialization string contains the following commands:
9546: #
9547: # [Setup mode items changed from factory defaults:]
9548: # \E)0 set alternate character set to
9549: # graphics
9550: # ^O set character set to default
9551: # [In case it wasn't]
9552: # \E[m turn off all attributes
9553: # [In case they weren't off]
9554: # \E[=107; cursor wrap and
9555: # 207h character wrap on
9556: # \E[90;3u set Fkey definitions to "transmit"
9557: # defaults
9558: # \E[92;3u set cursor key definitions to
9559: # "transmit" defaults
9560: # \E[43;1u set shift F13 to transmit...
9561: # \177\E$P\177
9562: # \E[44;1u set shift F14 to transmit...
9563: # \177\E$Q\177
9564: # \E[45;1u set shift F15 to transmit...
9565: # \177\E$R\177
9566: # \E[46;1u set shift F16 to transmit...
9567: # \177\E$S\177
9568: # \E[200;1u set shift up to transmit...
9569: # \177\E$A\177
9570: # \E[201;1u set shift down to transmit...
9571: # \177\E$B\177
9572: # \E[202;1u set shift right to transmit...
9573: # \177\E$C\177
9574: # \E[203;1u set shift left to transmit...
9575: # \177\E$D\177
9576: # \E[204;1u set shift home to transmit...
9577: # \177\E$H\177
9578: # \E[212;1u set backtab to transmit...
9579: # \177\E$I\177
9580: # \E[213;1u set shift backspace to transmit...
9581: # \177\E$^H\177
9582: # \E[214;1u set shift del to transmit...
9583: # "\E$\177"
9584: # [Necessary items not mentioned in setup mode:]
9585: # \E[2!w move to window 2
9586: # \E[25;25w define window as line 25 of memory
9587: # \E[!w move to window 1
9588: # \E[2*w show current line of window 2 as
9589: # status line
9590: # \E[2+x set meta key to use high bit
9591: # \E[;3+} move underline to bottom of character
9592: #
9593: # All Fkeys are set to their default transmit definitions with \E[90;3u
9594: # in is2=. IMPORTANT: to use this terminal definition, the "quit" stty
9595: # setting MUST be redefined or deactivated, because the default is
9596: # contained in almost all of this terminal's Fkey strings! If for some
9597: # reason "quit" cannot be altered, the Fkeys can, but it would be
9598: # necessary to change ^| to ^] in all of these definitions, and add
9599: # \E[2;029!t to is2.
9600: # lines: is set to 24 because this terminal refuses to treat the 25th
9601: # line normally.
9602: # ll: Not available in power on mode, but turned on with \E[=107;207h in
9603: # is2=.
9604: # lm: Pointless, given that this definition locks a single screen of
9605: # memory into view, but what the hey...
9606: # rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any
9607: # other attributes alone), but some programs expect this to turn off
9608: # everything.
9609: # rmul: Could use \E[4!{ to turn off only underline (leaving any other
9610: # attributes alone), but some programs expect this to turn off
9611: # everything.
9612: # sgr: Attributes are set on this terminal with the string \E[ followed by
9613: # a list of attribute code numbers (in decimal, separated by
9614: # semicolons), followed by the character m. The attribute code
9615: # numbers are:
9616: # 1 for bold;
9617: # 2 for dim (which is ignored in power on mode);
9618: # 4 for underline;
9619: # 5 for blinking;
9620: # 7 for inverse;
9621: # 8 for not displayable; and
9622: # =99 for protected (except that there are strange side
9623: # effects to protected characters which make them inadvisable).
9624: # The mapping of terminfo parameters to attributes is as follows:
9625: # %p1 (standout) = bold and inverse together;
9626: # %p2 (underline) = underline;
9627: # %p3 (reverse) = inverse;
9628: # %p4 (blink) = blinking;
9629: # %p5 (dim) is ignored;
9630: # %p6 (bold) = bold;
9631: # %p7 (invisible) = not displayable;
9632: # %p8 (protected) is ignored; and
9633: # %p9 (alt char set) = alt char set.
9634: # The code to do this is:
9635: # \E[0 OUTPUT \E[0
9636: # %?%p1%p6%O IF (standout; bold) OR
9637: # %t;1 THEN OUTPUT ;1
9638: # %; ENDIF
9639: # %?%p2 IF underline
9640: # %t;4 THEN OUTPUT ;4
9641: # %; ENDIF
9642: # %?%p4 IF blink
9643: # %t;5 THEN OUTPUT ;5
9644: # %; ENDIF
9645: # %?%p1%p3%O IF (standout; reverse) OR
9646: # %t;7 THEN OUTPUT ;7
9647: # %; ENDIF
9648: # %?%p7 IF invisible
9649: # %t;8 THEN OUTPUT ;8
9650: # %; ENDIF
9651: # m OUTPUT m
9652: # %?%p9 IF altcharset
9653: # %t^N THEN OUTPUT ^N
9654: # %e^O ELSE OUTPUT ^O
9655: # %; ENDIF
9656: # sgr0: Everything is turned off (including alternate character set), since
9657: # there is no way of knowing what it is that the program wants turned
9658: # off.
9659: # smul: The "underline" attribute is reconfigurable to an overline or
9660: # strikethru, or (as done with \E[;3+} in is2=), to a line at the true
9661: # bottom of the character cell. This was done to allow for more readable
9662: # underlined characters, and to be able to distinguish between an
9663: # underlined space, an underscore, and an underlined underscore.
9664: # xenl: Terminal can be configured to not need this, but this "glitch"
9665: # behavior is actually preferable with autowrap terminals.
9666: #
9667: # Parameters kf31= thru kf53= actually contain the strings sent by the shifted
9668: # Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2
9669: # string modifies the 'O' in kf43 to kf46 to a '$'.
9670: #
9671: # kcbt was originally ^I but redefined in is2=.
9672: # kHOM was \E[H originally but redefined in is2=, as were a number of
9673: # other keys.
9674: # kDC was originally \177 but redefined in is2=.
9675: #
9676: # kbs: Shift was also ^H originally but redefined as \E$^H in is2=.
9677: # tsl: Go to window 2, then do an hpa=.
9678: #
9679: #------- flash=\E[8;3!}^G\E[3;3!}
9680: #------- flash=\E[?5h$<100>\E[?5l
9681: # There are two ways to flash the screen, both of which have their drawbacks.
9682: # The first is to set the bell mode to video, transmit a bell character, and
9683: # set the bell mode back - but to what? There is no way of knowing what the
9684: # user's old bell setting was before we messed with it. Worse, the command to
9685: # set the bell mode also sets the key click volume, and there is no way to say
9686: # "leave that alone", or to know what it's set to, either.
9687: # The second way to do a flash is to set the screen to inverse video, pad for a
9688: # tenth of a second, and set it back - but like before, there's no way to know
9689: # that the screen wasn't ALREADY in inverse video, or that the user may prefer
9690: # it that way. The point is moot anyway, since vi (and probably other
9691: # programs) assume that by defining flash=, you want the computer to use it
9692: # INSTEAD of bel=, rather than as a secondary type of signal.
9693: #
9694: #------- cvvis=\E[+{
9695: # The is the power on setting, which is also as visible as the cursor
9696: # gets.
9697: #------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw
9698: # Windowing is possible, but not defined here because it is also used to
9699: # emulate status line functions. Allowing a program to set a window could
9700: # clobber the status line or render it unusable. There is additional memory,
9701: # but screen scroll functions are destructive and do not make use of it.
9702: #
9703: #------- dim= Not available in power on mode.
9704: # You have a choice of defining low intensity characters as "half bright" and
9705: # high intensity as "normal", or defining low as "normal" and high as "bold".
9706: # No matter which you choose, only one of either "half bright" or "bold" is
9707: # available at any time, so taking the time to override the default is
9708: # pointless.
9709: #
9710: #------- prot=\E[=0;99m
9711: # Not defined, because it appears to have some strange side effects.
9712: #------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
9713: #------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%;
9714: #------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%;
9715: # Available, but making them available to programs is inadvisable.
9716: # The code to do this is:
9717: # %?%p1%{24}%< IF ((key; 24) <;
9718: # %p1%{30}%> ((key; 30) >;
9719: # %p1%{54}%< (key; 54) <
9720: # %A ) AND
9721: # %O ) OR
9722: # [that is, "IF key < 24 OR (key > 30 AND key < 54)",]
9723: # %t\E[ THEN OUTPUT \E[
9724: # %p1%d OUTPUT (key) as decimal
9725: # [next line applies to pfx only]
9726: # ;1 OUTPUT ;1
9727: # u OUTPUT u
9728: # \177 OUTPUT \177
9729: # %p2%s OUTPUT (string) as string
9730: # \177 OUTPUT \177
9731: # [DEL chosen as delimiter, but could be any character]
9732: # [implied: ELSE do nothing]
9733: # %; ENDIF
9734: #
9735: #------- rs2=
9736: # Not defined since anything it might do could be done faster and easier with
9737: # either Meta-Shift-Reset or the main power switch.
9738: #
9739: #------- smkx=\E[1!z
9740: #------- rmkx=\E[!z
9741: # These sequences apply to the cursor and setup keys only, not to the
9742: # numeric keypad. But it doesn't matter anyway, since making these
9743: # available to programs is inadvisable.
9744: # For the key definitions below, all sequences beginning with \E$ are
9745: # custom and programmed into the terminal via is2. \E$ also has no
9746: # meaning to any other terminal.
9747: #
9748: #------- cmdch=\E[;%p1%d!t
9749: # Available, but making it available to programs is inadvisable.
9750: #------- smxon=\E[1*q
9751: # Available, but making it available to programs is inadvisable.
9752: # Terminal will send XON/XOFF on buffer overflow.
9753: #------- rmxon=\E[*q
9754: # Available, but making it available to programs is inadvisable.
9755: # Terminal will not notify on buffer overflow.
9756: #------- smm=\E[2+x
9757: #------- rmm=\E[+x
9758: # Available, but making them available to programs is inadvisable.
9759: #
9760: # Printing:
9761: # It's not made clear in the manuals, but based on other ansi/vt type
9762: # terminals, it's a good guess that this terminal is capable of both
9763: # "transparent print" (which doesn't copy data to the screen, and
9764: # therefore needs mc5i: specified to say so) and "auxilliary print"
9765: # (which does duplicate printed data on the screen, in which case mc4=
9766: # and mc5= should use the \E[?4i and \E[?5i strings instead).
9767:
9768: hds200|Human Designed Systems HDS200,
9769: am, bw, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
9770: cols#80, it#8, lines#24, lm#0,
9771: acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
9772: blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{,
9773: clear=\E[H\E[J, cnorm=\E[+{, cr=^M,
9774: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
9775: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
9776: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9777: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
9778: dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K,
9779: fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH,
9780: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
9781: invis=\E[0;8m,
1.11 millert 9782: is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+},
1.1 millert 9783: kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H,
9784: kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9785: kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r,
9786: kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ,
9787: kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r,
9788: kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r,
9789: kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r,
9790: kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r,
9791: kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r,
9792: kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r,
9793: kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r,
9794: kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r,
9795: kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r,
9796: kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H,
9797: kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A,
9798: mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\E[E, rc=\E8,
9799: rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, rmso=\E[m\017,
9800: rmul=\E[m\017, sc=\E7,
9801: sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
9802: sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m,
9803: smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG,
9804: vpa=\E[%i%p1%dd,
9805:
9806: # <ht> through <el> included to specify padding needed in raw mode.
9807: # (avt-ns: added empty <acsc> to suppress a tic warning --esr)
1.11 millert 9808: avt-ns|concept avt no status line,
9809: OTbs, am, eo, mir, ul, xenl, xon,
9810: cols#80, it#8, lines#24, lm#192,
9811: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
9812: clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M,
9813: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
9814: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
9815: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
9816: cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>,
9817: dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H,
9818: hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@,
9819: ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>,
9820: invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l,
9821: is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t,
9822: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9823: kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
9824: kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H,
9825: mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
9826: pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#,
9827: prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m,
9828: ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n,
9829: rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{,
9830: sc=\E7,
9831: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
9832: sgr0=\E[m, smacs=\017$<1>, smcup=\E[=4l\E[1;24w\E2\r,
9833: smir=\E[4h, smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m,
9834: tbc=\E[2g, vpa=\E[%p1%{1}%+%dd,
9835: avt-rv-ns|concept avt in reverse video mode/no status line,
9836: flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h,
9837: use=avt-ns,
9838: avt-w-ns|concept avt in 132 column mode/no status line,
9839: is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w,
9840: use=avt-ns,
9841: avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video,
9842: flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
9843: smcup=\E[H\E[1;24;1;132w,
9844: use=avt-ns,
1.1 millert 9845:
9846: # Concept AVT with status line. We get the status line using the
9847: # "Background status line" feature of the terminal. We swipe the
9848: # first line of memory in window 2 for the status line, keeping
9849: # 191 lines of memory and 24 screen lines for regular use.
9850: # The first line is used instead of the last so that this works
9851: # on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this
9852: # assumes an 8 page AVT but lm isn't currently used anywhere.)
9853: #
1.11 millert 9854: avt+s|concept avt status line changes,
9855: eslok, hs,
9856: lm#191,
9857: dsl=\E[0*w, fsl=\E[1;1!w,
9858: is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n,
9859: rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r,
9860: tsl=\E[2;1!w\E[;%p1%dH\E[2K,
9861: avt|avt-s|concept-avt|avt w/80 columns,
9862: use=avt+s, use=avt-ns,
9863: avt-rv|avt-rv-s|avt reverse video w/sl,
9864: flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, use=avt+s,
9865: use=avt-ns,
9866: avt-w|avt-w-s|concept avt 132 cols+status,
9867: is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, use=avt+s,
9868: use=avt-ns,
9869: avt-w-rv|avt-w-rv-s|avt wide+status+rv,
9870: flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h,
9871: smcup=\E[H\E[1;24;1;132w,
9872: use=avt+s, use=avt-ns,
1.1 millert 9873:
9874: #### Contel Business Systems.
9875: #
9876:
9877: # Contel c300 and c320 terminals.
1.11 millert 9878: contel300|contel320|c300|Contel Business Systems C-300 or C-320,
9879: am, in, xon,
9880: cols#80, lines#24, xmc#1,
9881: bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
9882: cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
9883: dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
9884: el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
9885: hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
9886: kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
9887: kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
9888: rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3,
1.1 millert 9889: # Contel c301 and c321 terminals.
9890: contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321,
9891: flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>,
1.11 millert 9892: use=contel300,
1.1 millert 9893:
9894: #### Data General (dg)
9895: #
9896: # According to James Carlson <carlson@xylogics.com> writing in January 1995,
9897: # the terminals group at Data General was shut down in 1991; all these
9898: # terminals have thus been discontinued.
9899: #
1.11 millert 9900: # DG terminals have function keys that respond to the SHIFT and CTRL keys,
9901: # e.g., SHIFT-F1 generates a different code from F1. To number the keys
9902: # sequentially, first the unmodified key codes are listed as F1 through F15.
9903: # Then their SHIFT versions are listed as F16 through F30, their CTRL versions
9904: # are listed as F31 through F45, and their CTRL-SHIFT versions are listed as
9905: # F46 through F60. This is done in the private "includes" below whose names
9906: # start with "dgkeys+".
9907: #
9908: # DG terminals generally support 8 bit characters. For each of these terminals
9909: # two descriptions are supplied:
9910: # 1) A default description for 8 bits/character communications, which
9911: # uses the default DG international character set and keyboard codes.
9912: # 2) A description with suffix "-7b" for 7 bits/character communications.
9913: # This description must use the NON-DEFAULT native keyboard language.
9914:
9915: # Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33),
9916: # Ctrl/Shift fdkeys (kf34-kf44).
9917:
9918: dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys,
9919: ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z,
9920: kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
9921: kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z,
9922: kf11=\233011z, kf12=\233012z, kf13=\233013z,
9923: kf14=\233014z, kf15=\233000z, kf16=\233101z,
9924: kf17=\233102z, kf18=\233103z, kf19=\233104z,
9925: kf2=\233002z, kf20=\233105z, kf21=\233106z,
9926: kf22=\233107z, kf23=\233108z, kf24=\233109z,
9927: kf25=\233110z, kf26=\233111z, kf27=\233112z,
9928: kf28=\233113z, kf29=\233114z, kf3=\233003z,
9929: kf30=\233100z, kf31=\233201z, kf32=\233202z,
9930: kf33=\233203z, kf34=\233204z, kf35=\233205z,
9931: kf36=\233206z, kf37=\233207z, kf38=\233208z,
9932: kf39=\233209z, kf4=\233004z, kf40=\233210z,
9933: kf41=\233211z, kf42=\233212z, kf43=\233213z,
9934: kf44=\233214z, kf45=\233200z, kf46=\233301z,
9935: kf47=\233302z, kf48=\233303z, kf49=\233304z,
9936: kf5=\233005z, kf50=\233305z, kf51=\233306z,
9937: kf52=\233307z, kf53=\233308z, kf54=\233309z,
9938: kf55=\233310z, kf56=\233311z, kf57=\233312z,
9939: kf58=\233313z, kf59=\233314z, kf6=\233006z,
9940: kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z,
9941: khome=\233H, kprt=\233i,
9942:
9943: dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys,
9944: ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z,
9945: kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
9946: kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z,
9947: kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z,
9948: kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z,
9949: kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z,
9950: kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z,
9951: kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z,
9952: kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z,
9953: kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z,
9954: kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z,
9955: kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z,
9956: kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z,
9957: kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z,
9958: kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z,
9959: kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z,
9960: kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z,
9961: kf9=\E[009z, khome=\E[H, kprt=\E[i,
9962:
9963: dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys,
9964: kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K,
9965: kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c,
9966: kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r,
9967: kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3,
9968: kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8,
9969: kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#,
9970: kf37=^^$, kf38=^^%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(,
9971: kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w,
9972: kf8=^^x, kf9=^^y, khome=^H,
9973:
9974: dgkeys+15|Private entry describing 15 DG mode special keys,
9975: kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^,
9976: kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^},
9977: kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d,
9978: kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i,
9979: kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s,
9980: kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5,
9981: kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:,
9982: kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!,
9983: kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%, kf51=^^&,
9984: kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,,
9985: kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x,
9986: kf9=^^y,
9987:
9988: # Data General color terminals use the "Tektronix" color model. The total
9989: # number of colors varies with the terminal model, as does support for
9990: # attributes used in conjunction with color.
9991:
9992: # Removed u7, u8 definitions since they conflict with tack:
9993: # Preserve user-defined colors in at least some cases.
9994: # u7=^^Fh,
9995: # Default is ACM mode.
9996: # u8=^^F}20^^Fi^^F}21,
9997: #
9998: dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode,
9999: bce,
10000: colors#16, ncv#53, pairs#256,
10001: op=\036Ad\036Bd,
10002: setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
10003: setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
10004: setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
10005:
10006: dg+fixed|Fixed color info for DG D430C terminals in DG mode,
10007: use=dgunix+fixed,
10008:
10009: # Video attributes are coordinated using static variables set by "sgr", then
10010: # checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings.
10011: # (D=dim, U=underline, B=blink, R=reverse.)
10012: dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode,
10013: bce,
10014: colors#8, ncv#16, pairs#64,
10015: op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m,
10016: setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10017: setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10018: setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10019: setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10020:
10021: dg+color|Color info for Data General D470C terminals in ANSI mode,
10022: colors#16, ncv#53, pairs#256,
10023: setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10024: setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10025: setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10026: setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m,
10027: use=dg+color8,
10028:
10029: dgmode+color8|Color info for Data General D220/D230C terminals in DG mode,
10030: bce,
10031: colors#8, ncv#16, pairs#64,
10032: op=\036Ad\036Bd,
10033: setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
10034: setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c,
10035: setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c,
10036:
10037: dgmode+color|Color info for Data General D470C terminals in DG mode,
10038: colors#16, pairs#256,
10039: setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
10040: setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c,
10041: use=dgmode+color8,
10042:
10043: dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode,
10044: bce, ccc,
10045: colors#52, ncv#53, pairs#26,
10046: initp=\036RG0%p1%02X%p2%{256}%*%{1001}%/%02X%p3%{256}%*%{1001}%/%02X%p4%{256}%*%{1001}%/%02X%p5%{256}%*%{1001}%/%02X%p6%{256}%*%{1001}%/%02X%p7%{256}%*%{1001}%/%02X,
10047: oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00,
10048: op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D,
10049: scp=\036RG2%p1%02X,
10050:
10051: # Colors are in the order: normal, reverse, dim, dim + reverse.
10052: dg+ccc|Configurable color info for DG D430C terminals in DG mode,
10053: bce, ccc,
10054: colors#52, ncv#53, pairs#26,
10055: initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{256}%*%{1001}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c,
10056: oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00,
10057: op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=,
10058: scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c,
10059:
10060: # The generic DG terminal type (an 8-bit-clean subset of the 6053)
10061: # Initialization string 1 sets:
10062: # ^R - vertical scrolling enabled
10063: # ^C - blinking enabled
10064: dg-generic|Generic Data General terminal in DG mode,
10065: am, bw, msgr, xon,
10066: cols#80, lines#24,
10067: bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
10068: cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C,
10069: mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\,
10070: smul=^T,
10071: use=dgkeys+11,
1.1 millert 10072:
10073: # According to the 4.4BSD termcap file, the dg200 <cup> should be the
10074: # termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap
10075: # notation that's "^P%r%+\200%+\200"). Those \200s are suspicious,
10076: # maybe they were originally nuls (which would fit).
1.11 millert 10077:
10078: dg200|data general dasher 200,
10079: OTbs, am, bw,
10080: cols#80, lines#24,
10081: bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X,
10082: cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J,
10083: kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q,
10084: kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x,
10085: kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U,
10086: smso=^^D, smul=^T,
10087:
1.1 millert 10088: # Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL
10089: dg210|dg-ansi|Data General 210/211,
10090: am,
10091: cols#80, lines#24,
1.11 millert 10092: OTnl=\E[B, clear=\E[2J, cud1=\E[B, cup=\E[%i%p1%d;%p2%dH,
10093: cuu1=\E[A, ed=\E[J, el=\E[K, home=\E[H, kcub1=\E[D,
10094: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
10095: nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, smso=\E[7;m,
10096: smul=\E[4;m,
1.1 millert 10097: # From: Peter N. Wan <ihnp4!gatech!gacsr!wan>
10098: # courtesy of Carlos Rucalde of Vantage Software, Inc.
10099: # (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover.
10100: # I suspect the d200 function keys actually work on the dg211, check it out.)
10101: dg211|Data General d211,
1.11 millert 10102: cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@,
10103: kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L,
1.1 millert 10104: rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>,
1.11 millert 10105: use=dg200,
1.14 millert 10106:
10107: # dg450 from Cornell (not official)
1.1 millert 10108: dg450|dg6134|data general 6134,
1.11 millert 10109: cub1@, cuf1=^X, use=dg200,
1.14 millert 10110:
10111: # Not official...
1.1 millert 10112: # Note: lesser Dasher terminals will not work with vi because vi insists upon
10113: # having a command to move straight down from any position on the bottom line
10114: # and scroll the screen up, or a direct vertical scroll command. The 460 and
10115: # above have both, the D210/211, for instance, has neither. We must use ANSI
10116: # mode rather than DG mode because standard UNIX tty drivers assume that ^H is
10117: # backspace on all terminals. This is not so in DG mode.
10118: # (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the
10119: # grounds that there is no matching ":ml:"
10120: # fixed garbled ":k9=\E[00\:z:" capability -- esr)
10121: dg460-ansi|Data General Dasher 460 in ANSI-mode,
1.11 millert 10122: OTbs, am, msgr, ul,
1.1 millert 10123: cols#80, it#8, lines#24,
1.11 millert 10124: OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B,
10125: cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P,
10126: dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
10127: ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D,
10128: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10129: kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z,
10130: kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z,
10131: kf8=\E[009z, kf9=\E[010z, khome=\E[H, lf0=f1, lf1=f2, lf2=f3,
10132: lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, rev=\E[7m,
10133: ri=\E[T, rmso=\E[m, rmul=\E[05, sgr0=\E[m, smso=\E[7m,
10134: smul=\E[4m,
1.14 millert 10135: # From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official)
1.1 millert 10136: # Data General 605x
10137: # Ought to work for a Model 6242, Type D210 as well as a 605x.
10138: # Note that the cursor-down key transmits ^Z. Job control users, beware!
10139: # This also matches a posted description of something called a `Dasher 100'
10140: # so there's a dg100 alias here.
10141: # (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr)
1.11 millert 10142: dg6053-old|dg100|data general 6053,
1.1 millert 10143: OTbs, am, bw, ul,
10144: cols#80, lines#24,
1.11 millert 10145: OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z,
10146: cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K,
10147: home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X,
10148: kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v,
10149: kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L,
10150: rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D,
10151: smul=^T,
10152:
10153: # (Some performance can be gained over the generic DG terminal type)
10154: dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053,
10155: xon@,
10156: home=^P\0\0, ll=^P\0^W, use=dg-generic,
10157:
10158: # Like 6053, but adds reverse video and more keypad and function keys.
10159: d200|d200-dg|Data General DASHER D200,
10160: bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^],
10161: sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;,
10162: sgr0=\017\025\035\036E, smso=^^D^\,
10163: use=dgkeys+15, use=dg6053,
10164:
10165: # DASHER D210 series terminals in ANSI mode.
10166: # Reverse video, no insert/delete character/line, 7 bits/character only.
10167: #
10168: # Initialization string 1 sets:
10169: # <0 - scrolling enabled
10170: # <1 - blink enabled
10171: # <4 - print characters regardless of attributes
10172: d210|d214|Data General DASHER D210 series,
10173: am, bw, msgr, xon,
10174: cols#80, lines#24,
10175: bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M,
10176: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
10177: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
10178: cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K,
10179: el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l,
10180: ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m,
10181: sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m,
10182: sgr0=\E[m, smso=\E[2;7m, smul=\E[4m,
10183: use=dgkeys+7b,
10184:
10185: # DASHER D210 series terminals in DG mode.
10186: # Like D200, but adds clear to end-of-screen and needs XON/XOFF.
10187: d210-dg|d214-dg|Data General DASHER D210 series in DG mode,
10188: xon,
10189: ed=^^FF, use=d200-dg,
10190:
10191: # DASHER D211 series terminals in ANSI mode.
10192: # Like the D210, but with 8-bit characters and local printer support.
10193: #
10194: # Initialization string 2 sets:
10195: # \E[2;1;1;1v
10196: # 2;1 - 8 bit operations
10197: # 1;1 - 8 bit (international) keyboard language
10198: # \E(B - default primary character set (U.S. ASCII)
10199: # \E)4 - default secondary character set (international)
10200: # ^O - primary character set
10201: #
10202: d211|d215|Data General DASHER D211 series,
10203: km,
10204: is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b, use=d210,
10205:
10206: # Initialization string 2 sets:
10207: # \E[2;0;1;0v
10208: # 2;0 - 7 bit operations
10209: # 1;0 - 7 bit (native) keyboard language
10210: # \E(0 - default character set (the keyboard native language)
10211: # ^O - primary character set
10212: d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode,
10213: km@,
10214: is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211,
10215:
10216: # Like the D210 series, but adds support for 8-bit characters.
10217: #
10218: # Reset string 2 sets:
10219: # ^^N - secondary character set
10220: # ^^FS0> - 8 bit international character set
10221: # ^^O - primary character set
10222: # ^^FS00 - default character set (matching the native keyboard language)
10223: #
10224: d211-dg|d215-dg|Data General DASHER D211 series in DG mode,
10225: km,
10226: rs2=\036N\036FS0>\036O\036FS00, use=d210-dg,
10227:
10228: d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode,
10229: use=d211-dg,
10230:
10231: # Enhanced DG mode with changes to be more UNIX compatible.
10232: d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode,
10233: mc5i,
10234: it#8,
10235: acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI,
10236: clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA,
10237: el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J,
10238: is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd,
10239: kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB,
10240: kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0,
10241: mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00,
10242: rs2=\036N\036FS0E\036O\036FS00,
10243: sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
10244: sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11,
10245: vpa=\020\177%p1%c,
10246: use=dgkeys+15, use=d216-dg,
10247: d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines,
10248: lines#25,
10249: is3=\036Fz2, use=d216+,
10250:
10251: d217-unix|Data General DASHER D217 in DG-UNIX mode,
10252: use=d216-unix,
10253: d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines,
10254: use=d216-unix-25,
10255:
10256: # DASHER D220 color terminal in ANSI mode.
10257: # Like the D470C but with fewer colors and screen editing features.
10258: #
10259: # Initialization string 1 sets:
10260: # \E[<0;<1;<4l
10261: # <0 - scrolling enabled
10262: # <1 - blink enabled
10263: # <4 - print characters regardless of attributes
10264: # \E[m - all attributes off
10265: # Reset string 1 sets:
10266: # \Ec - initial mode defaults (RIS)
10267: #
10268: d220|Data General DASHER D220,
10269: mc5i@,
10270: dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, use=dg+color8, use=d470c,
10271:
10272: d220-7b|Data General DASHER D220 in 7 bit mode,
10273: mc5i@,
10274: dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, use=dg+color8, use=d470c-7b,
10275:
10276: # Initialization string 3 sets:
10277: # - default cursor (solid rectangle)
10278: # Reset string 2 sets:
10279: # ^^N - secondary character set
10280: # ^^FS0> - 8 bit international character set
10281: # ^^O - primary character set
10282: # ^^FS00 - default character set (matching the native keyboard language)
10283: #
10284: d220-dg|Data General DASHER D220 color terminal in DG mode,
10285: mc5i@,
10286: dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@,
10287: rs2=\036N\036FS0>\036O\036FS00,
10288: use=dgmode+color8, use=d470c-dg,
10289:
10290: # DASHER D230C color terminal in ANSI mode.
10291: # Like the D220 but with minor ANSI compatibility improvements.
10292: #
10293: d230c|d230|Data General DASHER D230C,
10294: blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J,
10295: rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m,
10296: sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
10297: sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m,
10298: smul=\E[4;50m,
10299: use=dgkeys+7b, use=d220,
10300:
10301: d230c-dg|d230-dg|Data General DASHER D230C in DG mode,
10302: use=d220-dg,
10303:
10304: # DASHER D400/D450 series terminals.
10305: # These add intelligent features like insert/delete to the D200 series.
10306: #
10307: # Initialization string 2 sets:
10308: # ^^FQ2 - default cursor (solid rectangle)
10309: # ^^FW - character protection disabled
10310: # ^^FJ - normal (80 column) mode
10311: # ^^F\^ - horizontal scrolling enabled (for alignment)
10312: # ^^FX004? - margins at columns 0 and 79
10313: # ^^F] - horizontal scrolling disabled
10314: # ^^O - primary character set
10315: # ^^FS00 - default character set (the keyboard native language)
10316: # - (should reset scrolling regions, but that glitches the screen)
10317: # Reset string 1 sets:
10318: # ^^FA - all terminal defaults except scroll rate
10319: # Reset string 2 sets:
10320: # ^^F] - horizontal scrolling disabled
10321: # ^^FT0 - jump scrolling
10322: #
10323: d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series,
10324: mc5i,
10325: acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0,
10326: cnorm=\036FQ2, dch1=^^K, dl1=^^FI,
10327: enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177,
10328: ich1=^^J, il1=^^FH,
10329: is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00,
10330: ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O,
10331: rs1=^^FA, rs2=\036F]\036FT0,
10332: sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;,
10333: sgr0=\017\025\035\036E\036O, smacs=^^N,
10334: vpa=\020\177%p1%c, use=d210-dg,
10335:
10336: # DASHER D410/D460 series terminals in ANSI mode.
10337: # These add a large number of intelligent terminal features.
10338: #
10339: # Initialization string 1 sets:
10340: # \E[<0;<1;<2;<4l
10341: # <0 - scrolling enabled
10342: # <1 - blink enabled
10343: # <2 - horizontal scrolling enabled (for alignment)
10344: # <4 - print characters regardless of attributes
10345: # \E[5;0v - normal (80 column) mode
10346: # \E[1;1;80w - margins at columns 1 and 80
10347: # \E[1;6;<2h
10348: # 1 - print all characters even if protected
10349: # 6 - character protection disabled
10350: # <2 - horizontal scrolling disabled
10351: # - (should reset scrolling regions, but that glitches the screen)
10352: #
10353: # Initialization string 2 sets:
10354: # \E[3;2;2;1;1;1v
10355: # 3;2 - default cursor (solid rectangle)
10356: # 2;1 - 8 bit operations
10357: # 1;1 - international keyboard language
10358: # \E(B - default primary character set (U.S. ASCII)
10359: # \E)4 - default secondary character set (international)
10360: # ^O - primary character set
10361: #
10362: # Reset string 1 sets:
10363: # \Ec - initial mode defaults (RIS)
10364: # \E[<2h - horizontal scrolling disabled
10365: #
10366: # Reset string 2 sets:
10367: # \E[4;0;2;1;1;1v
10368: # 4;0 - jump scrolling
10369: # 2;1 - 8 bit operations
10370: # 1;1 - 8 bit (international) keyboard language
10371: # \E(B - default primary character set (U.S. ASCII)
10372: # \E)4 - default secondary character set (international)
10373: #
10374: d410|d411|d460|d461|Data General DASHER D410/D460 series,
10375: mc5i,
10376: acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v,
10377: cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
10378: dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L,
10379: is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h,
10380: is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i,
10381: ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h,
10382: rs2=\E[4;0;2;1;1;1v\E(B\E)4,
10383: sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m\E)%?%p9%t6\016%e4\017%;,
10384: sgr0=\E[m\E)4\017, smacs=\E)6\016,
10385: use=d211,
10386:
10387: # Initialization string 2 sets:
10388: # \E[3;2;2;0;1;0v
10389: # 3;2 - default cursor (solid rectangle)
10390: # 2;0 - 7 bit operations
10391: # 1;0 - 7 bit (native) keyboard language
10392: # \E(0 - default character set (the keyboard native language)
10393: # ^O - primary character set
10394: #
10395: # Reset string 2 sets:
10396: # \E[4;0;2;0;1;0v
10397: # 4;0 - jump scrolling
10398: # 2;0 - 7 bit operations
10399: # 1;0 - 7 bit (native) keyboard language
10400: # \E(0 - default character set (the keyboard native language)
10401: #
10402: d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode,
10403: km@,
10404: enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O,
10405: rs2=\E[4;0;2;0;1;0v\E(0,
10406: sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;,
10407: sgr0=\E[m\017, smacs=^N,
10408: use=dgkeys+7b, use=d410,
10409:
10410: d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode,
10411: km,
10412: enacs@, rmacs=\036FS00,
10413: sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;,
10414: sgr0=\017\025\035\036E\036FS00, smacs=\036FS11,
10415: use=d400-dg,
10416:
10417: # DASHER D410/D460 series terminals in wide (126 columns) ANSI mode.
10418: #
10419: # Initialization string 1 sets:
10420: # \E[<0;<1;<2;<4l
10421: # <0 - scrolling enabled
10422: # <1 - blink enabled
10423: # <2 - horizontal scrolling enabled (for alignment)
10424: # <4 - print characters regardless of attributes
10425: # \E[5;1v - compressed (135 column) mode
10426: # \E[1;1;126 - margins at columns 1 and 126
10427: # \E[1;6;<2h
10428: # 1 - print all characters even if protected
10429: # 6 - character protection disabled
10430: # <2 - horizontal scrolling disabled
10431: # - (should reset scrolling regions, but that glitches the screen)
10432: #
10433: # Reset string 1 sets:
10434: # \Ec - initial mode defaults (RIS)
10435: # \E[5;1v - compressed (135 column) mode
10436: # \E[1;1;126w - margins at columns 1 and 126
10437: # \E[<2h - horizontal scrolling disabled
10438: #
10439: d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode,
10440: cols#126,
10441: is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
10442: rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h,
10443: use=d410,
10444:
10445: d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode,
10446: cols#126,
10447: is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h,
10448: rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h,
10449: use=d410-7b,
10450:
10451: d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode,
10452: use=d410-dg,
10453:
10454: # These add intelligent features like scrolling regions.
10455: d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode,
10456: civis=\036FQ0, clear=^^FE, cnorm=\036FQ5,
10457: cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI,
10458: home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH,
10459: is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00,
10460: ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I,
10461: rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10,
10462: vpa=\036FPFF%p1%2.2X,
10463: wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, use=d216+,
10464: d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode,
10465: cols#132,
10466: is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00,
10467: rs2=\036P@1\036FK\036FX0083,
10468: wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X, use=d412-unix,
10469: d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines,
10470: lines#25,
10471: is3=\036Fz2,
10472: wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, use=d462+,
10473: d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line,
10474: eslok, hs,
10475: clear=\036FG\036PH, fsl=\036F}01\022,
10476: is3=\036Fz2\036F}00\036FB180000\036F}01, ll@,
10477: tsl=\036F}00\036FP%p1%2.2X18\036PG,
10478: wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X, use=d462+,
10479:
10480: # Relative cursor motions are confined to the current window,
10481: # which is not what the scrolling region specification expects.
10482: # Thus, relative vertical cursor positioning must be deleted.
10483: d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region,
10484: csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;,
10485: cud1@, cuu1@, ll@,
10486: use=d462+,
10487:
10488: d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode,
10489: use=d412-unix,
10490: d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode,
10491: use=d412-unix-w,
10492: d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines,
10493: use=d412-unix-25,
10494: d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line,
10495: use=d412-unix-s,
10496: d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region,
10497: use=d412-unix-sr,
10498:
10499: d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode,
10500: use=d413-unix,
10501: d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode,
10502: use=d413-unix-w,
10503: d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines,
10504: use=d413-unix-25,
10505: d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line,
10506: use=d413-unix-s,
10507: d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region,
10508: use=d413-unix-sr,
10509:
10510: d430c-dg|d430-dg|Data General D430C in DG mode,
10511: use=d413-dg, use=dg+fixed,
10512: d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors,
10513: use=d413-dg, use=dg+ccc,
10514:
10515: d430c-unix|d430-unix|Data General D430C in DG-UNIX mode,
10516: use=d413-unix, use=dgunix+fixed,
10517: d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode,
10518: use=d413-unix-w, use=dgunix+fixed,
10519: d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines,
10520: use=d413-unix-25, use=dgunix+fixed,
10521: d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line,
10522: use=d413-unix-s, use=dgunix+fixed,
10523: d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region,
10524: use=d413-unix-sr, use=dgunix+fixed,
10525: d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors,
10526: use=d413-unix, use=dgunix+ccc,
10527: d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors,
10528: use=d413-unix-w, use=dgunix+ccc,
10529: d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors,
10530: use=d413-unix-25, use=dgunix+ccc,
10531: d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors,
10532: use=d413-unix-s, use=dgunix+ccc,
10533: d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors,
10534: use=d413-unix-sr, use=dgunix+ccc,
10535:
10536: # DASHER D470C color terminal in ANSI mode.
10537: # Like the D460 but with 16 colors and without a compressed mode.
10538: #
10539: # Initialization string 1 sets:
10540: # \E[<0;<1;<2;<4l
10541: # <0 - scrolling enabled
10542: # <1 - blink enabled
10543: # <2 - horizontal scrolling enabled (for alignment)
10544: # <4 - print characters regardless of attributes
10545: # \E[1;1;80w - margins at columns 1 and 80
10546: # \E[1;6;<2h
10547: # 1 - print all characters even if protected
10548: # 6 - character protection disabled
10549: # <2 - horizontal scrolling disabled
10550: # - (should reset scrolling regions, but that glitches the screen)
10551: #
10552: d470c|d470|Data General DASHER D470C,
10553: is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
10554: sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;,
10555: use=dg+color, use=d460,
10556:
10557: d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode,
10558: is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
10559: sgr=\E[%?%p1%p3%|%p6%|%t7;%{1}%e%{0}%;%PR%?%p4%t5;%{1}%e%{0}%;%PB%?%p2%p6%|%t4;%{1}%e%{0}%;%PU%?%p1%p5%|%t2;%{1}%e%{0}%;%PDm%?%p9%t\016%e\017%;,
10560: use=dg+color, use=d460-7b,
10561:
10562: # Initialization string 2 sets:
10563: # ^^FQ2 - default cursor (solid rectangle)
10564: # ^^FW - character protection disabled
10565: # ^^F\^ - horizontal scrolling enabled (for alignment)
10566: # ^^FX004? - margins at columns 0 and 79
10567: # ^^F] - horizontal scrolling disabled
10568: # ^^O - primary character set
10569: # ^^FS00 - default character set (the keyboard native language)
10570: # - (should reset scrolling regions, but that glitches the screen)
10571: #
10572: d470c-dg|d470-dg|Data General DASHER D470C in DG mode,
10573: is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00,
10574: use=dgmode+color, use=d460-dg,
10575:
10576: # DASHER D555 terminal in ANSI mode.
10577: # Like a D411, but has an integrated phone.
10578: d555|Data General DASHER D555,
10579: use=d411,
10580: d555-7b|Data General DASHER D555 in 7-bit mode,
10581: use=d411-7b,
10582: d555-w|Data General DASHER D555 in wide mode,
10583: use=d411-w,
10584: d555-7b-w|Data General DASHER D555 in wide 7-bit mode,
10585: use=d411-7b-w,
10586: d555-dg|Data General DASHER D555 series in DG mode,
10587: use=d411-dg,
10588:
10589: # DASHER D577 terminal in ANSI mode.
10590: # Like a D411, but acts as a keyboard for serial printers ("KSR" modes).
10591: d577|Data General DASHER D577,
10592: use=d411,
10593: d577-7b|Data General DASHER D577 in 7-bit mode,
10594: use=d411-7b,
10595: d577-w|Data General DASHER D577 in wide mode,
10596: use=d411-w,
10597: d577-7b-w|Data General DASHER D577 in wide 7-bit mode,
10598: use=d411-7b-w,
10599:
10600: d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode,
10601: use=d411-dg,
10602:
10603: # DASHER D578 terminal.
10604: # Like a D577, but without compressed mode; like a D470C in this respect.
10605: #
10606: # Initialization string 1 sets:
10607: # \E[<0;<1;<2;<4l
10608: # <0 - scrolling enabled
10609: # <1 - blink enabled
10610: # <2 - horizontal scrolling enabled (for alignment)
10611: # <4 - print characters regardless of attributes
10612: # \E[1;1;80w - margins at columns 1 and 80
10613: # \E[1;6;<2h
10614: # 1 - print all characters even if protected
10615: # 6 - character protection disabled
10616: # <2 - horizontal scrolling disabled
10617: # - (should reset scrolling regions, but that glitches the screen)
10618: #
10619: d578|Data General DASHER D578,
10620: is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577,
10621: d578-7b|Data General DASHER D578 in 7-bit mode,
10622: is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h,
10623: use=d577-7b,
1.1 millert 10624:
10625: #### Datamedia (dm)
10626: #
1.14 millert 10627: # Datamedia was headquartered in Nashua, New Hampshire until it went
10628: # out of business in 1993, but the ID plates on the terminals referred
10629: # to the factory in Pennsauken, NJ. The factory was sold to a PCB board
10630: # manufacturer which threw out all information about the terminals.
1.11 millert 10631: #
10632:
10633: cs10|colorscan|Datamedia Color Scan 10,
10634: msgr,
10635: cols#80, lines#24,
10636: bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
10637: cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K,
10638: ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
10639: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m,
10640: sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10641: cs10-w|Datamedia Color Scan 10 with 132 columns,
10642: cols#132,
10643: cup=\E[%i%p1%02d;%p2%03dH, use=cs10,
1.1 millert 10644:
10645: # (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr)
10646: dm1520|dm1521|datamedia 1520,
1.11 millert 10647: OTbs, am, xenl,
1.1 millert 10648: cols#80, it#8, lines#24,
10649: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
1.11 millert 10650: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
10651: home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
10652: khome=^Y,
1.1 millert 10653: # dm2500: this terminal has both <ich> and <smir>. Applications using
10654: # termcap/terminfo directly (rather than through ncurses) might be confused.
10655: dm2500|datamedia2500|datamedia 2500,
1.11 millert 10656: OTbs, OTnc,
1.1 millert 10657: cols#80, lines#24,
10658: bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\,
10659: cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z,
1.11 millert 10660: dch1=\020\010\030\035$<10*>,
10661: dl1=\020\032\030\035$<10*>, el=^W, home=^B,
10662: ich1=\020\034\030\035$<10*>,
10663: il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377,
10664: rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^],
10665: smdc=^P, smir=^P, smso=^N,
1.1 millert 10666: # dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82)
10667: # also, has a meta-key.
10668: # From: <goldberger@su-csli.arpa>
10669: # (dmchat: ":MT:" changed to ":km:" -- esr)
10670: dmchat|dmchat version of datamedia 2500,
10671: km,
10672: dl1=\020\032\030\035$<2/>,
1.11 millert 10673: il1=\020\n\030\035\030\035$<1*/>, use=dm2500,
1.1 millert 10674: # (dm3025: ":MT:" changed to ":km:" -- esr)
10675: dm3025|datamedia 3025a,
1.11 millert 10676: OTbs, km,
1.1 millert 10677: cols#80, it#8, lines#24,
10678: bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
10679: cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
1.11 millert 10680: dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK,
10681: home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>,
10682: is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP,
10683: smir=\EP, smso=\EO1,
1.1 millert 10684: dm3045|datamedia 3045a,
1.11 millert 10685: OTbs, am, eo, km@, ul, xenl,
10686: dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA,
10687: kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r,
10688: kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r,
10689: khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@,
10690: use=dm3025,
1.1 millert 10691: # Datamedia DT80 soft switches:
10692: # 1 0=Jump 1=Smooth
10693: # Autorepeat 0=off 1=on
10694: # Screen 0=Dark 1=light
10695: # Cursor 0=u/l 1=block
10696: #
10697: # 2 Margin Bell 0=off 1=on
10698: # Keyclick 0=off 1=on
10699: # Ansi/VT52 0=VT52 1=Ansi
10700: # Xon/Xoff 0=Off 1=On
10701: #
10702: # 3 Shift3 0=Hash 1=UK Pound
10703: # Wrap 0=Off 1=On
10704: # Newline 0=Off 1=On
10705: # Interlace 0=Off 1=On
10706: #
10707: # 4 Parity 0=Odd 1=Even
10708: # Parity 0=Off 1=On
10709: # Bits/Char 0=7 1=8
10710: # Power 0=60Hz 1=50Hz
10711: #
10712: # 5 Line Interface 0=EIA 1=Loop
10713: # Aux Interface 0=EIA 1=Loop
10714: # Local Copy 0=Off 1=On
10715: # Spare
10716: #
10717: # 6 Aux Parity 0=Odd 1=Even
10718: # Aux Parity 0=Off 1=On
10719: # Aux Bits/Char 0=7 1=8
10720: # CRT Saver 0=Off 1=On
10721: # dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding.
10722: dm80|dmdt80|dt80|datamedia dt80/1,
10723: clear=\E[2J\E[H, cud1=^J, cuf1=\E[C,
10724: cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
1.11 millert 10725: home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM,
10726: rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
10727: use=vt100,
1.1 millert 10728: # except in 132 column mode, where it needs a little padding.
10729: # This is still less padding than the vt100, and you can always turn on
10730: # the ^S/^Q handshaking, so you can use vt100 flavors for things like
10731: # reverse video.
10732: dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode,
10733: cols#132,
1.11 millert 10734: clear=\E[H\E[2J$<50/>, cud1=^J,
10735: cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>,
10736: ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80,
1.14 millert 10737: # From: Adam Thompson <athompso@pangea.ca> Sept 10 1995
1.11 millert 10738: dt80-sas|Datamedia DT803/DTX for SAS usage,
10739: am, bw,
10740: cols#80, lines#24,
10741: acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
10742: bel=^G, clear=^L, cr=^M,
10743: csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2,
10744: cub1=^H, cud1=\EB, cuf1=^\,
10745: cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K,
10746: el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB,
10747: is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J,
10748: kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N,
10749: rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF,
10750: smso=\E$2\004, tbc=\E'0,
1.1 millert 10751:
10752: # Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL
10753: # These aren't end-all Excel termcaps; but do insert/delete char/line
10754: # and name some of the extra function keys. (Mike Feldman ccvaxa!feldman)
10755: # The naming convention has been bent somewhat, with the use of E? (where
10756: # E is for 'Excel') as # a name. This was done to distinguish the entries
10757: # from the other Datamedias in use here, and yet to associate a model of
10758: # the Excel terminals with the regular datamedia terminals that share
10759: # major characteristics.
10760: excel62|excel64|datamedia Excel 62,
10761: dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
10762: kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
10763: use=dt80,
10764: excel62-w|excel64-w|datamedia Excel 62 in 132 char mode,
10765: dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv,
10766: kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h,
10767: use=dt80w,
10768: excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode,
10769: dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J,
10770: kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l,
10771: smir=\E[4h,
10772: use=dt80,
10773:
10774: #### Falco
10775: #
10776: # Falco Data Products
10777: # 440 Potrero Avenue
10778: # Sunnyvale, CA 940864-196
10779: # Vox: (800)-325-2648
10780: # Fax: (408)-745-7860
10781: # Net: techsup@charm.sys.falco.com
10782: #
10783: # Current Falco models as of 1995 are generally ANSI-compatible and support
10784: # emulations of DEC VT-series, Wyse, and Televideo types.
10785: #
10786:
10787: # Test version for Falco ts-1. See <arpavax.hickman@ucb> for info
10788: # This terminal was released around 1983 and was discontinued long ago.
10789: # The standout and underline highlights are the same.
10790: falco|ts1|ts-1|falco ts-1,
1.11 millert 10791: OTbs, am,
1.1 millert 10792: cols#80, it#8, lines#24,
10793: bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
10794: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
10795: dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE,
10796: ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
1.11 millert 10797: kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0,
10798: smir=\Eq, smso=\Eg1, smul=\Eg1,
1.1 millert 10799: falco-p|ts1p|ts-1p|falco ts-1 with paging option,
1.11 millert 10800: OTbs, am, da, db, mir, msgr, ul,
1.1 millert 10801: cols#80, it#8, lines#24,
1.11 millert 10802: bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B,
10803: cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A,
10804: dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I,
1.1 millert 10805: il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B,
1.11 millert 10806: kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er,
10807: rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq,
10808: smso=\Eg4, smul=\Eg1,
1.1 millert 10809: # (ts100: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 10810: ts100|ts100-sp|falco ts100-sp,
10811: am, mir, msgr, xenl, xon,
10812: cols#80, it#8, lines#24, vt#3,
10813: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
10814: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
10815: clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
10816: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
10817: cuf=\E[%p1%dC, cuf1=\E[C$<2>,
10818: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
10819: cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>,
10820: el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H,
10821: ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea,
10822: ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn,
10823: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM,
10824: kf0=\EOy, kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS,
10825: kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
10826: rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
10827: rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
10828: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
10829: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
10830: sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
10831: smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
10832: ts100-ctxt|falco ts-100 saving context,
10833: rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100,
1.1 millert 10834:
10835: #### Florida Computer Graphics
10836: #
10837:
10838: # Florida Computer Graphics Beacon System, using terminal emulator program
10839: # "host.com", as provided by FCG. This description is for an early release
10840: # of the "host" program. Known bug: <ed> clears the whole screen, so it's
10841: # commented out.
10842:
10843: # From: David Bryant <cbosg!djb> 1/7/83
1.11 millert 10844: beacon|FCG Beacon System,
1.1 millert 10845: am, da, db,
1.11 millert 10846: cols#80, lines#32,
10847: bel=\ESTART\r\E37\r\EEND\r$<1>,
10848: blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M,
10849: cub1=^H, cud1=^J, cuf1=\EV,
10850: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU,
10851: dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE,
10852: ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=,
10853: rmso=\ESTART\r\E70\,0\r\EEND\r$<20>,
10854: rmul=\ESTART\r\E60\,0\r\EEND\r,
10855: sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>,
10856: smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>,
10857: smso=\ESTART\r\E70\,6\r\EEND\r$<20>,
10858: smul=\ESTART\r\E60\,1\r\EEND\r,
1.1 millert 10859:
10860: #### Fluke
10861: #
10862:
10863: # The f1720a differences from ANSI: no auto margin, destructive
10864: # tabs, # of lines, funny highlighting and underlining
10865: f1720|f1720a|fluke 1720A,
10866: xt,
10867: cols#80, lines#16, xmc#1,
10868: bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
1.11 millert 10869: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J,
10870: el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^],
10871: kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
10872: smso=\E[7m, smul=\E[4m,
1.1 millert 10873:
10874: #### Liberty Electronics (Freedom)
10875: #
10876: # Liberty Electronics
10877: # 48089 Fremont Blvd
10878: # Fremont CA 94538
10879: # Vox: (510)-623-6000
10880: # Fax: (510)-623-7021
10881:
10882: # From: <faletti@berkeley.edu>
10883: # (f100: added empty <acsc> to suppress a tic warning;
10884: # made this relative to adm+sgr -- note that <invis> isn't
10885: # known to work for f100 but does on the f110. --esr)
1.11 millert 10886: f100|freedom|freedom100|freedom model 100,
10887: OTbs, am, bw, hs, mir, msgr, xon,
10888: cols#80, lines#24,
10889: acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J,
10890: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10891: dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET,
10892: flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c,
10893: ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>,
10894: is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V,
10895: kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r,
10896: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10897: kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er,
10898: smacs=\E%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef,
10899: vpa=\E[%p1%{32}%+%c, use=adm+sgr,
10900: f100-rv|freedom-rv|freedom 100 in reverse video,
10901: flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100,
1.1 millert 10902: # The f110 and f200 have problems with vi(1). They use the ^V
10903: # code for the down cursor key. When kcud1 is defined in terminfo
10904: # as ^V, the Control Character Quoting capability (^V in insert mode)
10905: # is lost! It cannot be remapped in vi because it is necessary to enter
10906: # a ^V to to quote the ^V that is being remapped!!!
10907: #
10908: # f110/f200 users will have to decide whether
10909: # to lose the down cursor key or the quoting capability. We will opt
10910: # initially for leaving the quoting capability out, since use of VI
10911: # is not generally applicable to most interactive applications
10912: # (f110: added <ht>, <khome> & <kcbt> from f100 -- esr)
10913: f110|freedom110|Liberty Freedom 110,
10914: bw@, eslok,
10915: it#8, wsl#80,
1.11 millert 10916: blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V,
10917: cvvis=\E.2, dim=\EG@, dl1=\ER, dsl=\Ef\r,
10918: flash=\Eb$<200/>\Ed, il1=\EE, ip@, is2@, kclr=^^, kdch1=\EW,
10919: kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf10@, kich1=\EQ,
10920: kil1=\EE, mc4=\Ea, mc5=\E`, ri=\EJ, rmacs=\E%%, rmir=\Er\EO,
10921: smacs=\E$, smir=\EO\Eq, smso=\EG<, tsl=\Ef,
10922: use=f100,
10923: f110-14|Liberty Freedom 110 14inch,
10924: dch1@, use=f110,
10925: f110-w|Liberty Freedom 110 - 132 cols,
10926: cols#132, use=f110,
10927: f110-14w|Liberty Freedom 110 14in/132 cols,
10928: cols#132,
10929: dch1@, use=f110,
1.1 millert 10930: # (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
1.11 millert 10931: f200|freedom200|Liberty Freedom 200,
10932: OTbs, am, eslok, hs, mir, msgr, xon,
10933: cols#80, it#8, lines#24, wsl#80,
10934: acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0,
10935: clear=^Z, cnorm=\E.1, cr=^M,
10936: csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V,
10937: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
10938: cvvis=\E.1, dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY,
10939: el=\ET, flash=\Eo$<200/>\En, fsl=^M, home=^^,
10940: hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H,
10941: kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW,
10942: kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
10943: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
10944: kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`,
10945: ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<,
10946: tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c,
10947: use=adm+sgr,
10948: f200-w|Liberty Freedom 200 - 132 cols,
10949: cols#132, use=f200,
1.1 millert 10950: # The f200 has the ability to reprogram the down cursor key. The key is
10951: # reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM,
10952: # so powering the terminal off and on will not cause the change to be lost.
10953: f200vi|Liberty Freedom 200 for vi,
1.11 millert 10954: flash=\Eb$<200/>\Ed, kcud1=^J, use=f200,
10955: f200vi-w|Liberty Freedom 200 - 132 cols for vi,
10956: cols#132, use=f200vi,
1.1 millert 10957:
10958: #### GraphOn (go)
10959: #
10960: # Graphon Corporation
10961: # 544 Division Street
10962: # Campbell, CA 95008
10963: # Vox: (408)-370-4080
10964: # Fax: (408)-370-5047
10965: # Net: troy@graphon.com (Troy Morrison)
10966: #
10967: #
10968: # The go140 and go225 have been discontinued. GraphOn now makes X terminals,
10969: # including one odd hybrid that starts out life on power-up as a character
10970: # terminal, than can be switched to X graphics mode (driven over the serial
10971: # line) by an escape sequence. No info on this beast yet.
10972: # (go140: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 10973: go140|graphon go-140,
10974: OTbs,
10975: cols#80, it#8, lines#24,
1.1 millert 10976: clear=\E[H\E[2J$<10/>, cub1=^H, cuf1=\E[C,
1.11 millert 10977: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
10978: ed=\E[J$<10/>, el=\E[K, ht=^I,
1.1 millert 10979: if=/usr/share/tabset/vt100, il1=\E[L,
10980: is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q,
1.11 millert 10981: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
10982: kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
10983: rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m,
10984: rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h,
10985: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
1.1 millert 10986: go140w|graphon go-140 in 132 column mode,
1.11 millert 10987: am,
1.1 millert 10988: cols#132,
1.11 millert 10989: is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, use=go140,
1.1 millert 10990: # Hacked up vt200 termcap to handle GO-225/VT220
10991: # From: <edm@nwnexus.WA.COM>
10992: # (go225: I added <rmam>/<smam> based on the init string -- esr)
10993: go225|go-225|Graphon 225,
1.11 millert 10994: OTbs, am, mir, xenl,
10995: cols#80, it#8, lines#25, vt#3,
10996: blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
10997: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
10998: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
10999: ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED,
11000: is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H,
11001: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
11002: kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m,
1.1 millert 11003: rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l,
1.11 millert 11004: rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>,
11005: rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w,
11006: sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r,
11007: smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
1.1 millert 11008:
1.11 millert 11009: #### Harris (Beehive)
1.1 millert 11010: #
11011: # Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine.
11012: # Their terminal group is ancient history now (1995) though the parent
11013: # company is still in business.
11014: #
11015:
1.11 millert 11016: # Beehive documentation is undated and marked Preliminary and has no figures
11017: # so we must have early Superbee2 (Model 600, according to phone conversation
11018: # with mfr.). It has proved reliable except for some missing padding
11019: # (notably after \EK and <nl> at bottom of screen).
11020: #
11021: # The key idea is that AEP mode is poison for <cup> & that US's in
11022: # the local memory should be avoided like the plague. That means
11023: # that the 2048 character local buffer is used as 25 lines of 80
11024: # characters, period. No scrolling local memory, folks. It also
11025: # appears that we cannot use naked INS LINE feature since it uses
11026: # US. The sbi fakes <il1> with an 80-space insert that may be too
11027: # slow at low speeds; also spaces get converted to \040 which is
11028: # too long for some programs (not vi). DEL LINE is ok but slow.
11029: #
11030: # The <nl> string is designed for last line of screen ONLY; cup to
11031: # 25th line corrects the motion inherent in scrolling to Page 1.
11032: #
11033: # There is one understood bug. It is that the screen appears to
11034: # pop to a new (blank) page after a <nel>, or leave a half-line
11035: # ellipsis to a quad that is the extra 48 memory locations. The
11036: # data received is dumped into memory but not displayed. Not to
11037: # worry if <cup> is being used; the lines not displayed will be,
11038: # whenever the cursor is moved up there. Since <cup> is addressed
11039: # relative to MEMORY of window, nothing is lost; but beware of
11040: # relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended,
11041: # therefore, is setenv MORE -c .
11042: #
11043: # WARNING: Not all features tested.
11044: #
11045: # Timings are assembled from 3 sources. Some timings may reflect
11046: # SB2/Model 300 that were used if more conservative.
11047: # Tested on a Model 600 at 1200 and 9600 bd.
11048: #
11049: # The BACKSPACEkb option is cute. The NEWLINE key, so cleverly
11050: # placed on the keyboard and useless because of AEP, is made
11051: # into a backspace key. In use ESC must be pressed twice (to send)
11052: # and sending ^C must be prefixed by ESC to avoid that weird
11053: # transmit mode associated with ENTER key.
11054: #
11055: # IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across
11056: # the screen, then it has dropped into ENTER mode; hit
11057: # RESET--ONLINE--!tset.
11058: #
11059: # As delivered this machine has a FATAL feature that will throw
11060: # it into that strange transmit state (SPOW) if the space bar is
11061: # hit after a CR is received, but before receiving a LF (or a
11062: # few others).
11063: #
11064: # The circuits MUST be modified to eliminate the SPOW latch.
11065: # This is done by strapping on chip A46 of the I/O board; cut
11066: # the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that
11067: # chip. This mod has been checked out on a Mod 600 of Superbee II.
11068: # With this modification absurdly high timings on cr are
11069: # unnecessary.
11070: #
11071: # NOTE WELL that the rear panel switch should be set to CR/LF,
11072: # not AEP!
11073: #
11074: sb1|beehive superbee,
11075: OTbs, am, bw, da, db, mir, ul, xsb,
11076: cols#80, lines#25, xmc#1,
11077: bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r,
11078: cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d,
11079: cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>,
11080: el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1,
11081: il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>,
11082: ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED,
11083: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK,
11084: kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu,
11085: kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO,
11086: krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER,
11087: rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO,
11088: smso=\E_1, smul=\E_0, tbc=\E3,
11089: sbi|superbee|beehive superbee at Indiana U.,
11090: xsb,
11091: cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA, use=sb1,
11092: # Alternate (older) description of Superbee - f1=escape, f2=^C.
11093: # Note: there are at least 3 kinds of superbees in the world. The sb1
11094: # holds onto escapes and botches ^C's. The sb2 is the best of the 3.
11095: # The sb3 puts garbage on the bottom of the screen when you scroll with
11096: # the switch in the back set to CRLF instead of AEP. This description
11097: # is tested on the sb2 but should work on all with either switch setting.
11098: # The f1/f2 business is for the sb1 and the <xsb> can be taken out for
11099: # the other two if you want to try to hit that tiny escape key.
11100: # This description is tricky: being able to use cup depends on there being
11101: # 2048 bytes of memory and the hairy <nl> string.
11102: superbee-xsb|beehive super bee,
11103: am, da, db, xsb,
11104: cols#80, it#8, lines#25,
11105: clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J,
11106: cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>,
11107: dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>,
11108: home=\EH, ht=^I, hts=\E1,
11109: ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ,
11110: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq,
11111: kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew,
11112: khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3,
11113: # This loses on lines > 80 chars long, use at your own risk
11114: superbeeic|super bee with insert char,
11115: ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb,
11116: sb2|sb3|fixed superbee,
11117: xsb@, use=superbee,
11118:
1.14 millert 11119: #### Beehive Medical Electronics
11120: #
11121: # Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999):
11122: # Regarding your question though; Beehive terminals weren't made by Harris.
11123: # They were made by Beehive Medical Electronics in Utah. They went out of
11124: # business in the early '80s.
11125: #
11126: # (OK, then, I don't know why a couple of these say "harris beehive".)
11127: #
11128:
1.11 millert 11129: # Reports are that most of these Beehive entries (except superbee) have not
11130: # been tested and do not work right. <rmso> is a trouble spot. Be warned.
11131:
11132: # (bee: <ich1> was empty, which is obviously bogus -- esr)
11133: beehive|bee|harris beehive,
11134: OTbs, am, mir,
11135: cols#80, lines#24,
11136: cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC,
11137: cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
11138: dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>,
11139: kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11140: kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL,
11141: krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@,
11142: smir=\EQ, smso=\EdP, smul=\Ed`,
11143: # set tab is ^F, clear (one) tab is ^V, no way to clear all tabs.
11144: # good grief - does this entry make :sg:/:ug: when it doesn't have to?
11145: # look at those spaces in <rmso>/<smso>. Seems strange to me...
11146: # (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you
11147: # really care, cook up one using ^F -- esr)
11148: beehive3|bh3m|beehiveIIIm|harris beehive 3m,
11149: OTbs, am,
11150: cols#80, it#8, lines#20,
11151: bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K,
11152: dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F,
11153: il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s,
11154: beehive4|bh4|beehive 4,
11155: am,
11156: cols#80, lines#24,
11157: bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
11158: cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J,
1.14 millert 11159: # There was an early Australian kit-built computer called a "Microbee".
11160: # It's not clear whether this is for one of those or for a relative
11161: # of the Beehive.
1.11 millert 11162: microb|microbee|micro bee series,
11163: OTbs, am,
11164: cols#80, it#8, lines#24,
11165: bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
11166: cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
11167: el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
11168: kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et,
11169: kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@,
11170: rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`,
11171:
1.1 millert 11172: # 8675, 8686, and bee from Cyrus Rahman
11173: # (8675: changed k10, k11...k16 to k;, F1...F6 -- esr)
11174: ha8675|harris 8675,
11175: is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F,
1.11 millert 11176: kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei,
11177: kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H,
11178: kf8=\177, kf9=\Ee,
11179: use=bee,
1.1 millert 11180: # (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation
11181: # in :is: -- esr)
11182: ha8686|harris 8686,
11183: is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#,
1.11 millert 11184: kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003,
11185: kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003,
11186: kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003,
11187: kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(,
11188: use=bee,
1.1 millert 11189:
11190: #### Hazeltine
11191: #
11192: # Hazeltine appears to be out of the terminal business as of 1995. These
11193: # guys were co-owners of the Terminal Brain Damage Hall Of Fame along with
11194: # Harris. They have a hazeltine.com domain (but no web page there ) and can
11195: # be reached at:
11196: #
11197: # Hazeltine
11198: # 450 East Pulaski Road
11199: # Greenlawn, New York 11740
11200: #
11201: # As late as 1993, manuals for the terminal product line could still be
11202: # purchased from:
11203: #
11204: # TRW Customer Service Division
11205: # 15 Law Drive
11206: # P.O. Box 2076
11207: # Fairfield, NJ 07007-2078
11208: #
11209: # They're now (1998) a subsidiary of General Electric, operating under the
11210: # marque "GEC-Marconi Hazeltine" and doing military avionics. Web page
11211: # at <http://www.gec.com/cpd/1ncpd.htm#1.55>.
11212: #
11213:
11214: # Since <cuf1> is blank, when you want to erase something you
11215: # are out of luck. You will have to do ^L's a lot to
11216: # redraw the screen. h1000 is untested. It doesn't work in
11217: # vi - this terminal is too dumb for even vi. (The code is
11218: # there but it isn't debugged for this case.)
11219: hz1000|hazeltine 1000,
1.11 millert 11220: OTbs,
11221: cols#80, lines#12,
11222: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K,
11223: ind=^J,
1.1 millert 11224: # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
11225: hz1420|hazeltine 1420,
1.11 millert 11226: OTbs, am,
1.1 millert 11227: cols#80, lines#24,
11228: bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P,
11229: cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S,
11230: ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y,
11231: smso=\E^_,
11232: # New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents
11233: # freakout with out-of-range args and tn3270. No hz since it needs to
11234: # receive tildes.
11235: hz1500|hazeltine 1500,
1.11 millert 11236: OTbs, am, hz,
1.1 millert 11237: cols#80, lines#24,
11238: bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
1.11 millert 11239: cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c,
11240: cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R,
11241: il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P,
11242: kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_,
1.1 millert 11243: # h1510 assumed to be in sane escape mode. Else use h1500.
11244: # (h1510: early versions of this entry apparently had "<rmso=\E^_>,
11245: # <smso=\E^Y>, but these caps were commented out in 8.3; also,
11246: # removed incorrect and overridden ":do=^J:" -- esr)
11247: hz1510|hazeltine 1510,
1.11 millert 11248: OTbs, am,
1.1 millert 11249: cols#80, lines#24,
11250: bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P,
11251: cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X,
11252: el=\E^O, il1=\E^Z, ind=^J,
11253: # Hazeltine 1520
11254: # The following switch settings are assumed for normal operation:
11255: # FULL CR U/L_CASE ESCAPE
11256: # FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON
11257: # Other switches may be set for operator convenience or communication
11258: # requirements.
11259: hz1520|Hazeltine 1520,
11260: OTbs, am, bw, msgr,
11261: cols#80, lines#24,
11262: bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J,
11263: cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
11264: ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H,
11265: kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L,
11266: kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z,
11267: rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_,
11268: # This version works with the escape switch off
11269: # (h1520: removed incorrect and overridden ":do=^J:" -- esr)
11270: hz1520-noesc|hazeltine 1520,
11271: am, hz,
11272: cols#80, lines#24,
11273: bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
1.11 millert 11274: cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O,
11275: home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_,
1.1 millert 11276: # Note: the h1552 appears to be the first Hazeltine terminal which
11277: # is not braindamaged. It has tildes and backprimes and everything!
11278: # Be sure the auto lf/cr switch is set to cr.
11279: hz1552|hazeltine 1552,
1.11 millert 11280: OTbs,
11281: cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue,
11282: lf2=red, lf3=green,
11283: use=vt52,
1.1 millert 11284: hz1552-rv|hazeltine 1552 reverse video,
1.11 millert 11285: cud1=^J, rmso=\ET, smso=\ES, use=hz1552,
1.1 millert 11286: # Note: h2000 won't work well because of a clash between upper case and ~'s.
11287: hz2000|hazeltine 2000,
11288: OTbs, OTnc, am,
11289: cols#74, lines#27,
1.11 millert 11290: bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J,
11291: cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R,
11292: il1=~\032$<6>, ind=^J, pad=\177,
1.1 millert 11293: # Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote:
11294: # I tested this termcap entry for the Hazeltine Esprit with vi. It seems
11295: # to work ok. There is one problem though if one types a lot of garbage
11296: # characters very fast vi seems not able to keep up and hangs while trying
11297: # to insert. That's in insert mode while trying to insert in the middle of
11298: # a line. It might be because the Esprit doesn't have insert char and delete
11299: # char as a built in function. Vi has to delete to end of line and then
11300: # redraw the rest of the line.
1.11 millert 11301: esprit|Hazeltine Esprit I,
11302: OTbs, am, bw,
11303: cols#80, lines#24,
11304: bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K,
11305: cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S,
11306: ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H,
11307: kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J,
11308: kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J,
11309: kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R,
11310: lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9,
11311: rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_,
1.1 millert 11312: esprit-am|hazeltine esprit auto-margin,
1.11 millert 11313: am, use=esprit,
1.1 millert 11314: # Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL
11315: # Vi it seems always wants to send a control J for "do" and it turned out
11316: # that the terminal would work somewhat if the auto LF/CR was turned off.
11317: # (hmod1: removed :dn=~^K: -- esr)
11318: hmod1|Hazeltine Modular 1,
11319: OTbs, am, hz,
11320: cols#80, lines#24,
11321: bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P,
1.11 millert 11322: cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z,
11323: ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R,
11324: rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_,
1.1 millert 11325: #
11326: # Hazeltine Executive 80 Model 30 (1554?)
11327: # from Will Martin <control@ALMSA-1.ARPA> via BRL
11328: # Like VT100, except for different "am" behavior.
11329: hazel|exec80|h80|he80|Hazeltine Executive 80,
11330: OTbs, OTpt, am,
11331: cols#80, it#8, lines#24, vt#3,
11332: OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
11333: clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
11334: cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
11335: cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
11336: ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I,
11337: is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB,
11338: kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
11339: kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
1.11 millert 11340: rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
11341: rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>,
1.1 millert 11342: rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
11343: sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>,
11344: smul=\E[4m$<2/>,
11345:
1.11 millert 11346: #### IBM
1.1 millert 11347: #
11348:
1.11 millert 11349: ibm327x|line mode IBM 3270 style,
11350: gn,
11351: clear=^M^J, el=^M, home=^M,
1.1 millert 11352:
1.11 millert 11353: ibm3101|i3101|IBM 3101-10,
11354: OTbs, am, xon,
11355: cols#80, lines#24,
11356: bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
11357: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
11358: el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB,
11359: kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH,
11360: ibm3151|IBM 3151 display,
11361: is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B,
11362: sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;,
11363: sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B,
11364: use=ibm3162,
11365: # From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992
11366: # I've commented out or translated some IBM extensions.
11367: ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display,
11368: OTbs, am, mir, msgr,
11369: cols#80, it#8, lines#24,
11370: acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370,
11371: bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED,
11372: cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
11373: cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J,
11374: invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1,
11375: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ,
11376: kdl1=\EO, ked=\EJ, kel=\EI, kend=\E2, kf1=\Ea\r, kf10=\Ej\r,
11377: kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r,
11378: kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r,
11379: kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r,
11380: kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r,
11381: kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r,
11382: kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN,
11383: knp=\EI, kpp=\EL, ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A,
11384: rmcup=\E>A, rmso=\E4@, rmul=\E4@,
11385: sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;,
11386: sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B,
11387:
11388: ibm3161-C|IBM 3161-C NLS terminal using cartridge,
11389: rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B,
11390: use=ibm3161,
11391: ibm3162|IBM 3162 display,
11392: blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a,
11393: rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a,
11394: use=ibm3161-C,
1.1 millert 11395:
1.11 millert 11396: ibm3164|i3164|IBM 3164,
11397: msgr,
11398: colors#8, pairs#64,
11399: rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A,
11400: setb=\E4 %p1%{64}%+%c,
11401: setf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@,
11402: smcup=\E!9/N\E>B, use=ibm3161,
1.1 millert 11403:
1.11 millert 11404: ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display,
11405: am, bw, msgr, xon,
11406: cols#80, it#8, lines#25,
11407: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
11408: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
11409: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
11410: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11411: cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
11412: dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H,
11413: hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
11414: indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z,
11415: kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
11416: kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q,
1.13 millert 11417: kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q,
11418: kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q,
11419: kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q,
11420: kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q,
11421: kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q,
11422: kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q,
11423: kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q,
11424: kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q,
11425: kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
11426: kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q,
11427: kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q,
11428: krmir=\E[4l, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT,
11429: rmir=\E[4l, rmso=\E[m, rmul=\E[m, rs2=\Ec, sc=\E[s,
1.11 millert 11430: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
11431: sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m,
1.1 millert 11432:
1.11 millert 11433: ibmaed|IBM Experimental display,
11434: OTbs, am, eo, msgr,
11435: cols#80, it#8, lines#52,
11436: clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC,
11437: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
11438: dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP,
11439: il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
11440: rmso=\E0, sgr0=\E0, smso=\E0,
11441: ibm-apl|apl|IBM apl terminal simulator,
11442: lines#25, use=dm1520,
11443: # (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'.
11444: # Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr)
11445: ibmmono|IBM workstation monochrome,
11446: eslok, hs,
11447: bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL,
11448: invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET,
11449: kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY,
11450: khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG,
11451: lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew,
11452: sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo, use=ibm3101,
11453: ibmega|IBM Enhanced Color Display,
11454: cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
11455: nel=^M^J,
11456: use=ibmmono,
11457: ibm5154|IBM 5154 Color display,
11458: colors#8, pairs#64,
11459: bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
11460: ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline,
11461: rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;,
11462: use=ibmmono,
11463: ibmvga-c|IBM VGA display color termcap,
11464: cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
11465: nel=^M^J,
11466: use=ibmega-c,
11467: ibmvga|IBM VGA display,
11468: cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J,
11469: nel=^M^J,
11470: use=ibmega,
11471: # ibmapa* and ibmmono entries come from ACIS 4.3 distribution
11472: rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display,
11473: lines#32,
11474: dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono,
11475: ibm6155|IBM 6155 Black & White display,
11476: blink@, bold@, use=ibm5151,
11477: # Advanced Monochrome (6153) and Color (6154) Graphics Display:
11478: ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display,
11479: lines#31,
11480: dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono,
11481: ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display,
11482: lines#31,
11483: dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmega-c,
11484: ibm6154|IBM 6154 Color displays,
11485: blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
11486: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
11487: sgr0=\E[0;10m,
11488: use=ibm5154,
11489: ibm6153|IBM 6153 Black & White display,
11490: blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m,
11491: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m,
11492: sgr0=\E[0;10m,
11493: use=ibm5151,
11494: ibm6153-90|IBM 6153 Black & White display,
11495: cols#90, lines#36,
11496: blink@, bold@, use=ibm5151,
11497: ibm6153-40|IBM 6153 Black & White display,
11498: cols#40, lines#12, use=ibm6153-90,
11499: ibm8512|ibm8513|IBM color VGA Terminal,
11500: am, mir, msgr,
11501: cols#80, it#8, lines#25,
11502: acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m,
11503: clear=\E[H\E[2J, cub1=\E[D, cud1=^J, cuf1=\E[C,
11504: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M,
11505: ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL,
11506: il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A,
11507: kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q,
11508: kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
11509: kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m,
11510: rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l,
11511: rmir=\E[4l, rmso=\E[m, rmul=\E[m,
11512: rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m,
11513: smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb,
11514: smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11515: use=ibm8503,
11516: hft-c|HFT with Color,
11517: colors#8, pairs#64,
11518: acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0,
11519: setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B,
11520: use=ibm5151,
11521: hft-c-old|HFT with Color PC850,
11522: colors#8, pairs#64,
11523: setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151,
1.14 millert 11524: hft|AIWS High Function Terminal,
11525: am, xon,
11526: cols#80, lines#25,
11527: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
11528: cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11529: cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
11530: ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H,
11531: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
11532: kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q,
11533: kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q,
11534: kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q,
11535: ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m,
11536: sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m,
1.11 millert 11537: ibm-system1|system1|ibm system/1 computer,
11538: am, xt,
11539: cols#80, lines#24,
11540: bel=^G, clear=^Z, cub1=^H, cuf1=^\,
11541: cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K,
11542: ind=^J,
1.14 millert 11543: # lft-pc850 : IBM Low Function Terminal Device
11544: # lft "supports" underline, bold, and blink in the sense that the lft code
11545: # sets all the right bits. HOWEVER, depending upon the adapter, these
11546: # attributes may or may not be supported by the device driver.
11547: lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device,
11548: am, bw, msgr, xon,
11549: cols#80, it#8, lines#25,
11550: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
11551: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
11552: cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
11553: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
11554: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
11555: dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K,
11556: home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL,
11557: il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec,
11558: kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B,
11559: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q,
11560: kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q,
11561: kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q,
11562: kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q,
11563: kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q,
11564: kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q,
11565: kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q,
11566: kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q,
11567: kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q,
11568: kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q,
11569: kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q,
11570: kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q,
11571: kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT,
11572: rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec,
11573: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;,
11574: sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m,
11575: tbc=\E[3g,
11576: ibm5081|IBM Megapel Color display,
1.11 millert 11577: acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B,
11578: s1ds=\E(0, sgr0=\E[0m\E(B,
11579: use=ibm5154,
11580: ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display,
11581: eslok, hs,
11582: lines#33,
11583: dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, use=ibmega-c,
11584: ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display,
11585: use=hft-c,
11586: ibm8514|IBM 8514/a color VGA display,
11587: eslok, hs,
11588: dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft,
11589: ibm8514-c|IBM 8514 color display with standout and underline,
11590: eslok, hs,
11591: lines#41,
11592: cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J,
11593: kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo,
11594: use=ibmega-c,
1.1 millert 11595:
11596: #
1.11 millert 11597: # AIX entries. IBM ships these with AIX 3.2.5.
11598: # AIX extension caps are commented out,
11599: # except for box1 which has been translated to an <acsc> string.
1.1 millert 11600: #
1.11 millert 11601: aixterm|IBM Aixterm Terminal Eemulator,
11602: eslok, hs,
11603: acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
11604: fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
11605: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m,
11606: sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT,
11607: use=ibm6154,
11608: aixterm-m|IBM AIXterm Monochrome Terminal Emulator,
11609: eslok, hs,
11610: acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E,
11611: fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0,
11612: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
11613: sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT,
11614: use=ibm6153,
11615: aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator,
11616: eslok, hs,
11617: bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@,
11618: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
11619: tsl=\E[?%p1%dT,
11620: use=ibm6153,
11621: jaixterm|IBM Kanji Aixterm Terminal Eemulator,
11622: acsc@, use=aixterm,
11623: jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator,
11624: acsc@,
11625: use=aixterm-m,
1.1 millert 11626:
1.11 millert 11627: #### Infoton/General Terminal Corp.
1.1 millert 11628: #
11629:
1.11 millert 11630: # gt100 sounds like something DEC would come out with. Let's hope they don't.
11631: i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100),
11632: OTbs, am,
11633: cols#80, lines#24,
11634: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
11635: cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM,
11636: ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL,
11637: ind=^J, rmso=\Ea, smso=\Eb,
11638: i400|infoton 400,
11639: OTbs, am,
11640: cols#80, lines#25,
11641: bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
11642: cup=%i\E[%p1%3d;%p2%3dH, cuu1=\E[A,
11643: dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N,
11644: il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q,
11645: # (addrinfo: removed obsolete ":bc=^Z:" -- esr)
11646: addrinfo,
11647: am,
11648: cols#80, lines#24,
11649: bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y,
11650: cup=\037%p1%{1}%-%c%p2%{1}%-%c, cuu1=^\, ed=^K, home=^H,
11651: ind=^J, ll=^H^\,
11652: # (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr)
11653: infoton,
11654: am,
1.1 millert 11655: cols#80, lines#24,
1.11 millert 11656: bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\,
11657: ed=^K, ind=^J, ll=^H^\,
1.1 millert 11658:
1.11 millert 11659: # The ICL6402 was actually the Kokusai Display System 6402.
11660: # The 6404 was the KDS7372 (color version of the 6402).
1.1 millert 11661: #
1.11 millert 11662: # ICL6404 control codes follow:
1.1 millert 11663: #
1.11 millert 11664: #code function
11665: #~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
11666: #ctrl-A set SOM position at cursor position
11667: #ctrl-G Bell
11668: #ctrl-H Backspace
11669: #ctrl-I Horiz tab
11670: #ctrl-J Linefeed
11671: #ctrl-K Cursor up
11672: #ctrl-L Cursor right
11673: #ctrl-M Carriage return
11674: #ctrl-N Disable xon/xoff to host
11675: #ctrl-O Enable xon/xoff to host
11676: #ctrl-R Enable bidirectional mode
11677: #ctrl-T Disable bidirectional mode
11678: #ctrl-V Cursor down
11679: #ctrl-Z Clear unprotected data to insert char
11680: #ctrl-^ Cursor home
11681: #ctrl-_ Newline
1.1 millert 11682: #
1.11 millert 11683: #ESC lead-in char for multiple character command
1.1 millert 11684: #
1.11 millert 11685: #ESC space R execute power on sequence
11686: #ESC ! p1 p2 define scroll region:
11687: # p1 = scroll top line: 20h - 37h
11688: # p1 = scroll bottom line: 20h - 37h
11689: #ESC " unlock keyboard
11690: #ESC # lock keyboard
11691: #ESC $ Semi-graphics mode on
11692: #ESC % Semi-graphics mode off
11693: #ESC & protect mode on
11694: #ESC ' protect mode off
11695: #ESC ( write protect mode off (full intensity)
11696: #ESC ) write protect mode on (half intensity)
1.1 millert 11697: #
1.11 millert 11698: #ESC * clear screen
11699: #ESC + clear unprotected data to insert char
1.1 millert 11700: #ESC , clear unprotected data to half intensity spaces
11701: #ESC - p1 p2 p3 p4 address cursor to page, row, column:
11702: # p1 = page number 0 - 3
11703: # p2 = row 20h - 7fh
11704: # p3 = column (lo) 20h - 7fh
11705: # p4 = column (hi) 20h - 21h (only 132 col)
11706: #ESC . p1 set cursor style:
11707: # p1 = 0 invisible cursor
11708: # p1 = 1 block blinking cursor
11709: # p1 = 2 block steady cursor
11710: # p1 = 3 underline blinking cursor
11711: # p1 = 4 underline steady cursor
11712: #ESC / transmit cursor location (page, row, column)
11713: #ESC 0 p1 p2 p3 p4 program edit key:
11714: # p1 = edit key code: '@'-'S', '`'-'s'
11715: # p2 p3 p4 = program data (3 bytes)
11716: #
11717: #ESC 1 set tab
11718: #ESC 2 clear tab at cursor
11719: #ESC 3 clear all tabs
11720: #ESC 4 send unprotect line to cursor
11721: #ESC 5 send unprotect page to cursor
11722: #ESC 6 send line to cursor
11723: #ESC 7 send page to cursor
11724: #ESC 8 n set scroll mode:
11725: # n = 0 set jump scroll
11726: # n = 1 set smooth scroll
11727: #ESC 9 n control display:
11728: # n = 0 display off
11729: # n = 1 display on
11730: #ESC : clear unprotected data to null
11731: #ESC ; clear unprotected data to insert char
11732: #
11733: #ESC < keyclick on
11734: #ESC = p1 p2 address cursor to row, column
11735: # p1 = row 20h - 7fh
11736: # p2 = column (lo) 20h - 7fh
11737: # p3 = column (hi) 20h - 21h (only 132 col)
11738: #ESC > keyclick off
11739: #ESC ? transmit cursor location (row, column)
11740: #
11741: #ESC @ copy print mode on
11742: #ESC A copy print mode off
11743: #ESC B block mode on
11744: #ESC C block mode off (conversation mode)
11745: #ESC D F set full duplex
11746: #ESC D H set half duplex
11747: #ESC E line insert
11748: #ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd)
11749: # 0 = black, 1 = red, 2 = green, 3 = yellow
11750: # 4 = blue, 5 = magenta, 6 = cyan, 7 = white
11751: #ESC G n set serial field attribute (n = 30h - 3Fh)
11752: #ESC H n full graphics mode:
11753: # n = 0 exit full graphics mode
11754: # n = 1 enter full graphics mode
11755: #ESC I back tab
11756: #ESC J back page
11757: #ESC K forward page
11758: #
11759: #ESC L unformatted page print
11760: #ESC M L move window left (132 col mode only)
11761: #ESC M R move window right (132 col mode only)
11762: #ESC N set page edit (clear line edit)
11763: #ESC O set line edit (clear page edit)
11764: #ESC P formatted page print
11765: #ESC Q character insert
11766: #ESC R line delete
11767: #ESC S send message unprotected only
11768: #ESC T erase line to insert char
11769: #ESC U set monitor mode (see ESC X, ESC u)
11770: #
11771: #ESC V n select video attribute mode:
11772: # n = 0 serial field attribute mode
11773: # n = 1 parallel character attribute mode
11774: #ESC V 2 n define line attribute:
11775: # n = 0 single width single height
11776: # n = 1 single width double height
11777: # n = 2 double width single height
11778: # n = 3 double width double height
11779: #ESC V 3 n select character font:
11780: # n = 0 system font
11781: # n = 1 user defined font
11782: #ESC V 4 n select screen mode:
11783: # n = 0 page screen mode
11784: # n = 1 virtual screen mode
11785: #ESC V 5 n control mouse mode:
11786: # n = 0 disable mouse
11787: # n = 1 enable sample mode
11788: # n = 2 send mouse information
11789: # n = 3 enable request mode
11790: #ESC W character delete
11791: #ESC X clear monitor mode (see ESC U, ESC u)
11792: #ESC Y erase page to insert char
11793: #
11794: #ESC Z n send user/status line:
11795: # n = 0 send user line
11796: # n = 1 send status line
11797: # n = 2 send terminal ID
11798: #ESC [ p1 p2 p3 set character attribute (parallel char mode):
11799: # p1: 0 = normal
11800: # 1 = blank
11801: # 2 = blink
11802: # 3 = blink blank (= blank)
11803: # 4 = reverse
11804: # 5 = reverse blank
11805: # 6 = reverse blink
11806: # 7 = reverse blink blank (= reverse blank)
11807: # 8 = underline
11808: # 9 = underline blank
11809: # : = underline blink
11810: # ; = underline blink blank
11811: # < = reverse underline
11812: # = = reverse underline blank
11813: # > = reverse underline blink
11814: # ? = reverse underline blink blank
11815: # p2, p3: f/grnd, b/grnd colour
11816: # (see ESC F for colours)
11817: # use ZZ for mono, eg.
11818: # ESC [ 0 Z Z for normal
11819: # ESC [ 4 Z Z for inverse etc.
11820: #
11821: #ESC \ n set page size:
11822: # n = 1 24 lines/page
11823: # n = 2 48 lines/page
11824: # n = 3 72 lines/page
11825: # n = 4 96 lines/page
11826: #ESC ] n set Wordstar mode:
11827: # n = 0 normal (KDS7372) mode
11828: # n = 1 Wordstar mode
11829: #
11830: #ESC b set foreground colour screen
11831: #
11832: #ESC c n enter self-test mode:
11833: # n = 0 exit self test mode
11834: # n = 1 ROM test
11835: # n = 2 RAM test
11836: # n = 3 NVRAM test
11837: # n = 4 screen display test
11838: # n = 5 main/printer port test
11839: # n = 6 mouse port test
11840: # n = 7 graphics board test
11841: # n = 8 graphics memory test
11842: # n = 9 display all 'E'
11843: # n = : display all 'H'
11844: #ESC d set background colour screen
11845: #
11846: #ESC e n program insert char (n = insert char)
11847: #ESC f text CR load user status line with 'text'
11848: #
11849: #ESC g display user status line on 25th line
11850: #ESC h display system status line on 25th line
11851: #ESC i tab
11852: #ESC j reverse linefeed
11853: #ESC k n duplex/local edit mode:
11854: # n = 0 duplex edit mode
11855: # n = 1 local edit mode
11856: #ESC l n select virtual screen:
11857: # n = 0 screen 1
11858: # n = 1 screen 2
11859: #ESC m save current config to NVRAM
11860: #ESC n p1 select display screen:
11861: # p1 = 0 screen 1
11862: # p1 = 1 screen 2
11863: # p1 = 2 screen 3
11864: # p1 = 3 screen 4
11865: #ESC o p1 p2 set characters/line and attribute:
11866: # p1 = 0 80 chars/line
11867: #
11868: #ESC o p1 p2 set characters/line and attribute:
11869: # p1 = 0 80 chars/line
11870: # p1 = 1 132 chars/line
11871: # p2 = 0 single width single height
11872: # p2 = 1 single width double height
11873: # p2 = 2 double width single height
11874: # p2 = 3 double width double height
11875: #
11876: #ESC q insert mode on
11877: #ESC r edit mode on
11878: #ESC s send message all
11879: #ESC t erase line to null
11880: #ESC u clear monitor mode (see ESC U, ESC X)
11881: #ESC v autopage mode on
11882: #ESC w autopage mode off
11883: #ESC x p1 p2 p3 define delimiter code...
11884: #ESC y erase page to null
11885: #
11886: #ESC z 2 p1 p2 p3 p4 draw quadrangle:
11887: # p1 = starting row
11888: # p2 = starting column
11889: # p3 = end row
11890: # p4 = end column
11891: #
11892: #ESC { p1 p2 p3 p4 configure main port
11893: # (baud, stop bits, parity, word length)
11894: #
11895: #ESC | p1 p2 text Ctrl-Y program function key with 'text':
11896: # p1 = function key code:
11897: # '1' - ';' normal f1- f11
11898: # '<' - 'F' shifted f1 - f11
11899: # p2 = program mode:
11900: # 1 = FDX
11901: # 2 = LOC
11902: # 3 = HDX
11903: # Ctrl-Y = terminator
11904: # (use Ctrl-P to escape ^P, ^Y )
11905: #
11906: #ESC } p1 p2 p3 p4 configure printer port
11907: # (baud, stop bits, parity, word length)
11908: #ESC ~ send system status
11909: #
11910: # Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997
11911: #
11912: # Entry is by esr going solely on above information and is UNTESTED.
11913: # This actually looks a lot like a Televideo 9xx.
11914: # This entry uses page 0 and is monochrome; I'm not brave enough to try
11915: # to make color work without a test terminal. The <am> capability is a guess.
11916: # The initialization string sets conversation mode, blinking underline cursor,
11917: # full duplex, parallel attribute mode, display user status line, white
11918: # foreground, black background, normal highlight.
11919: #
1.11 millert 11920: icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372,
11921: OTbs, am, hs,
11922: cols#80, lines#24,
11923: bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*,
11924: cnorm=\E.3, cr=^M,
11925: csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L,
11926: cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c,
11927: cuu1=^K, cvvis=\E.1, dch=\EW, dl1=\ER, home=^^, ht=^I, hts=\E1,
11928: il1=\EE, invis=\E[1ZZ, is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ,
11929: nel=^_, rev=\E[4ZZ, rmir=\Er,
11930: rmso=\E[%gh%{4}%^%Ph%gh%dZZ,
11931: rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1,
11932: sgr=\E[%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;ZZ,
11933: sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3,
11934: icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols,
11935: rs2=\Eo1,
11936: use=icl6404,
1.1 millert 11937:
11938: #### Interactive Systems Corp
11939: #
11940: # ISC used to sell OEMed and customized hardware to support ISC UNIX.
11941: # ISC UNIX still exists in 1995, but ISC itself is no more; they got
11942: # bought out by Sun.
11943: #
11944:
11945: # From: <cithep!eric> Wed Sep 16 08:06:44 1981
11946: # (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the
11947: # ":le=^_:" later overridden -- esr)
11948: intext|Interactive Systems Corporation modified owl 1200,
1.11 millert 11949: OTbs, am,
1.1 millert 11950: cols#80, it#8, lines#24, xmc#1,
1.11 millert 11951: bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J,
11952: cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\,
11953: dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>,
11954: el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H,
11955: kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r,
11956: kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r,
11957: kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<,
11958: rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%,
11959: smso=^V$\,,
1.1 millert 11960: intext2|intextii|INTERACTIVE modified owl 1251,
11961: am, bw, ul,
11962: cols#80, lines#24, xmc#0,
1.11 millert 11963: bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cud1=\E[B,
11964: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
11965: dl1=\E[M, ed=\E[J, el=\E[K,
1.1 millert 11966: flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u,
1.11 millert 11967: hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S,
11968: kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r,
11969: kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r,
11970: kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r,
11971: khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO,
11972: lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT,
11973: lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D,
11974: smul=\E[18 D,
1.1 millert 11975:
11976: #### Kimtron (abm, kt)
11977: #
11978: # Kimtron seems to be history, but as March 1998 these people are still
11979: # offering repair services for Kimtron equipment:
11980: #
11981: # Com/Pair Monitor Service
11982: # 1105 N. Cliff Ave.
11983: # Sioux Falls, South Dakota 57103
11984: #
11985: # WATS voice: 1-800/398-4946
11986: # POTS fax: +1 605/338-8709
11987: # POTS voice: +1 605/338-9650
11988: # Email: <compair@sd.cybernex.net>
11989: # Internet/Web: <http://www.com-pair.com>
11990: #
11991: # Kimtron entries include (undocumented) codes for: enter dim mode,
11992: # enter bold mode, enter reverse mode, turn off all attributes.
11993: #
11994:
11995: # Kimtron ABM 85 added by Dual Systems
11996: # (abm85: removed duplicated ":kd=^J:" -- esr)
11997: abm85|Kimtron ABM 85,
1.11 millert 11998: OTbs, am, bw, msgr,
1.1 millert 11999: cols#80, it#8, lines#24, xmc#1,
12000: cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L,
12001: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 12002: dl1=\ER, ed=\Ey, el=\Et, ht=^I,
1.1 millert 12003: if=/usr/share/tabset/stdcrt, il1=\EE,
1.11 millert 12004: is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H,
12005: kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek,
12006: rmul=\Em, smir=\EQ, smso=\Ej, smul=\El,
1.1 millert 12007: # Kimtron ABM 85H added by Dual Systems.
12008: # Some notes about the abm85h entries:
12009: # 1) there are several firmware revs of 85H in the world. Use abm85h-old for
12010: # firmware revs prior to SP51
12011: # 2) Make sure to use abm85h entry if the terminal is in 85h mode and the
12012: # abm85e entry if it is in tvi920 emulation mode. They are incompatible
12013: # in some places and NOT software settable i.e., <is2> can't fix it)
12014: # 3) In 85h mode, the arrow keys and special functions transmit when
12015: # the terminal is in dup-edit, and work only locally in local-edit.
12016: # Vi won't swallow `del char' for instance, but <smcup> turns on
12017: # dup-edit anyway so that the arrow keys will work right. If the
12018: # arrow keys don't work the way you like, change <smcup>, <rmcup>, and
12019: # <is2>. Note that 920E mode does not have software commands to toggle
12020: # between dup and local edit, so you get whatever was set last on the
12021: # terminal.
12022: # 4) <flash> attribute is nice, but seems too slow to work correctly
12023: # (\Eb<pad>\Ed)
12024: # 5) Make sure `hidden' attributes are selected. If `embedded' attributes
12025: # are selected, the <xmc@> entry should be removed.
12026: # 6) auto new-line should be on (selectable from setup mode only)
12027: #
12028: # From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985
12029: abm85h|Kimtron ABM 85H native mode,
1.11 millert 12030: hs,
12031: xmc@,
12032: bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@,
12033: fsl=^M, invis@,
1.1 millert 12034: is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El,
1.11 millert 12035: kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef,
12036: use=adm+sgr, use=abm85,
1.1 millert 12037: abm85e|Kimtron ABM 85H in 920E mode,
12038: xmc@,
12039: bel=^G, dim=\E), flash@,
12040: is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em,
1.11 millert 12041: rev=\Ej, sgr0=\E(\Ek, smir=\EZ,
12042: use=abm85,
1.1 millert 12043: abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev.,
12044: xmc@,
1.11 millert 12045: bel=^G, dim=\E),
1.1 millert 12046: is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF,
1.11 millert 12047: rev=\Ej, sgr0=\E(\Ek, smir=\EZ,
12048: use=abm85,
1.1 millert 12049: # From: <malman@bbn-vax.arpa>
12050: # (kt7: removed obsolete :ma=^V^J^L :" -- esr)
12051: kt7|kimtron model kt-7,
1.11 millert 12052: OTbs, am,
1.1 millert 12053: cols#80, it#8, lines#24,
12054: cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L,
12055: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
1.11 millert 12056: dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ,
12057: if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E",
12058: kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L,
12059: kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r,
12060: kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
12061: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
12062: kich1=\EQ, kil1=\EE, tsl=\Ef,
12063: use=adm+sgr,
1.1 millert 12064: # Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the
12065: # other kt7 entry and the adjacent key capabilities). Removed EE which is
12066: # identical to :mh:. Removed :ES=\EGD: which is some kind of highlight
12067: # but we can't figure out what.
12068: kt7ix|kimtron model kt-7 or 70 in IX mode,
12069: am, bw,
12070: cols#80, it#8, lines#25,
1.11 millert 12071: acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI,
1.1 millert 12072: civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V,
12073: cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12074: dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M,
12075: home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J,
12076: is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*,
12077: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER,
12078: ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r,
12079: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
12080: kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ,
12081: nel=^M^J, pulse=\EK, rmacs=\E%, rmir=, rmso=\EG0, rmul=\EG0,
12082: sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef,
12083:
12084: #### Microdata/MDIS
12085: #
12086: # This was a line of terminals made by McDonnell-Douglas Information Systems.
12087: # These entries come direct from MDIS documentation. I have edited them only
12088: # to move primary names of the form p[0-9] * to aliases, and to comment out
12089: # <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have
12090: # also removed the change history; the last version indicates this is
12091: # version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989).
12092: #
12093:
12094: # McDonnell Information Systems Terminal Family History
12095: # =========================================
12096: #
12097: # Prism-1, Prism-2 and P99:
12098: # Ancient Microdata and CMC terminals, vaguely like Adds Regent 25.
12099: #
12100: # Prism-4 and Prism-5:
12101: # Slightly less ancient range of Microdata terminals. Follow-on from
12102: # Prism-2, but with many enhancements. P5 has eight display pages.
12103: #
12104: # Prism-6:
12105: # A special terminal for use with library systems, primarily in Germany.
12106: # Limited numbers. Similar functionality to P5 (except attributes?).
12107: #
12108: # Prism-7, Prism-8 and Prism-9:
12109: # More recent range of MDIS terminals, in which P7 and P8
12110: # replace the P4 & P5, with added functionality, and P9 is the flagship.
12111: # The P9 has two emulation modes - P8 and ANSI - and includes a
12112: # large number of the DEC VT220 control sequences. Both
12113: # P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats.
12114: #
12115: # Prism-12 and Prism-14:
12116: # Latest range, functionally very similar to the P9. The P14 has a
12117: # black-on-white overscanning screen.
12118: #
12119: # The terminfo definitions given here are:
12120: #
12121: # p2 - Prism-2 (or Prism-1 or P99).
12122: #
12123: # p4 - Prism-4 (and older P7s & P8s).
12124: # p5 - Prism-5 (or Prism-6).
12125: #
12126: # p7 - Prism-7.
12127: # p8 - Prism-8 (in national or multinational mode).
12128: # p8-w - 132 column version of p8.
12129: # p9 - Prism-9 in ANSI mode.
12130: # p9-w - 132 column version of p9.
12131: # p9-8 - Prism-9 in Prism-8 emulation mode.
12132: # p9-8-w - As p9-8, but with 132 columns.
12133: #
12134: # p12 - Prism-12 in ANSI mode.
12135: # p12-w - 132 column version of p12.
12136: # p12-m - Prism-12 in MDC emulation mode.
12137: # p12-m-w - As p12-m, but with 132 columns.
12138: # p14 - Prism-14 in ANSI mode.
12139: # p14-w - 132 column version of p14.
12140: # p14-m - Prism-14 in MDC emulation mode.
12141: # p14-m-w - As p14-m, but with 132 columns.
12142: #
12143: # p2: Prism-2
12144: # -----------
12145: #
12146: # Includes Prism-1 and basic P99 without SP or MP loaded.
12147: # The simplest form of Prism-type terminal.
12148: # Basic cursor movement and clearing operations only.
12149: # No video attributes.
12150: # Notes:
12151: # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
12152: # value up, followed by backspace.
12153: #
1.11 millert 12154: prism2|MDC Prism-2,
12155: am, bw, msgr,
12156: cols#80, lines#24,
12157: bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
12158: cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
12159: cuu1=^Z, ed=\EJ, el=\EK, home=^A,
12160: hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
12161: ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c,
1.1 millert 12162:
12163: # p4: Prism-4
12164: # -----------
12165: #
12166: # Includes early versions of P7 & P8.
12167: # Basic family definition for most Prisms (except P2 and P9 ANSI).
12168: # Notes:
12169: # Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next
12170: # value up, followed by backspace.
12171: # Cursor key definitions removed because they interfere with vi and csh keys.
12172: #
1.11 millert 12173: prism4|p4|P4|MDC Prism-4,
12174: am, bw, hs, mc5i, msgr,
12175: cols#80, lines#24, wsl#72, xmc#1,
12176: bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>,
12177: cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
12178: cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
12179: cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK,
12180: fsl=^]\345, home=^A,
12181: hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c,
12182: ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER,
12183: rev=^CD, rmso=^C\s, rmul=^C\s,
12184: sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;,
12185: sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343,
12186: vpa=\013%p1%{32}%+%c,
1.1 millert 12187:
12188: # p5: Prism-5
12189: # -----------
12190: #
12191: # Same definition as p4. Includes Prism-6 (not tested!).
12192: # Does not use any multi-page features.
12193: #
1.11 millert 12194: prism5|p5|P5|MDC Prism-5,
12195: use=p4,
1.1 millert 12196:
12197: # p7: Prism-7
12198: # -----------
12199: #
12200: # Similar definition to p4. Uses ANSI cursor motion to avoid network problems.
12201: # Notes:
12202: # Use p4 for very early models of P7.
12203: # Rev-index removed; can't send nulls to terminal in 8-bit modes.
12204: #
1.11 millert 12205: prism7|p7|P7|MDC Prism-7,
12206: cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4,
1.1 millert 12207:
12208: # p8: Prism-8
12209: # -----------
12210: #
12211: # Similar definition to p7. Uses ANSI cursor motion to avoid network problems.
12212: # Supports national and multinational character sets.
12213: # Notes:
12214: # Alternate char set operations only work in multinational mode.
12215: # Use p4 for very early models of P8.
12216: # Rev-index removed; can't send nulls to terminal in 8-bit modes.
12217: # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
12218: #
1.11 millert 12219: prism8|p8|P8|MDC Prism-8,
12220: cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h,
12221: vpa=\E[%i%p1%dd,
12222: use=p4,
1.1 millert 12223:
12224: # p8-w: Prism-8 in 132 column mode
12225: # --------------------------------
12226: #
12227: # 'Wide' version of p8.
12228: # Notes:
12229: # Rev-index removed; can't send nulls to terminal in 8-bit modes.
12230: #
1.11 millert 12231: prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode,
12232: cols#132,
12233: is2=\E[<12h\E[<14h, use=p8,
1.1 millert 12234:
12235: # p9: Prism-9 in ANSI mode
12236: # -------------------------
12237: #
12238: # The "flagship" model of this generation of terminals.
12239: # ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones.
12240: # Notes:
12241: # Tabs only reset by "reset". Otherwise assumes default (8 cols).
12242: # Fixes to deal with terminal firmware bugs:
12243: # . 'ri' uses insert-line since rev index doesn't always
12244: # . 'sgr0' has extra '0' since esc[m fails
12245: # . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25
12246: # Not covered in the current definition:
12247: # . Labels
12248: # . Programming Fn keys
12249: # . Graphic characters (defaults correctly to vt100)
12250: # . Padding values (sets xon)
12251: # (esr: commented out <smacs>/<rmacs> because there's no <acsc>)
12252: #
1.11 millert 12253: prism9|p9|P9|MDC Prism-9 in ANSII mode,
12254: am, bw, hs, mc5i, msgr, xenl, xon,
12255: cols#80, it#8, lines#24, vt#3, wsl#72,
12256: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l,
12257: clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v,
12258: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
12259: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
12260: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
12261: dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX,
12262: ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`,
12263: ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J,
12264: is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D,
12265: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~,
12266: kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~,
12267: kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~,
12268: kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~,
12269: kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
12270: khome=\E[H, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=^M^J,
12271: prot=\E[32%{, rc=\E[%z, rep=\E[%p2%db%p1%c, rev=\E[7m,
12272: ri=\E[L, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
12273: rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N,
12274: sc=\E[%y,
12275: sgr=\E[%{0}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{2}%+%;%?%p4%t%{1}%+%;%?%p6%t%{8}%+%;%?%p8%t%{32}%+%;%d%%{%?%p9%t\016%e\017%;,
12276: sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
12277: tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd,
1.1 millert 12278:
12279: # p9-w: Prism-9 in 132 column mode
12280: # --------------------------------
12281: #
12282: # 'Wide' version of p9.
12283: #
1.11 millert 12284: prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode,
12285: cols#132,
12286: is2=\E[&p\E[<12l\E F\E[<14h,
12287: rs2=\E[&p\E[<12l\E F\E[<14h, use=p9,
1.1 millert 12288:
12289: # p9-8: Prism-9 in P8 mode
12290: # ------------------------
12291: #
12292: # P9 terminal in P8 emulation mode.
12293: # Similar to p8 definition.
12294: # Insertion and deletion operations possible.
12295: #
1.11 millert 12296: prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode,
12297: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12298: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8,
1.1 millert 12299:
12300: # p9-8-w: Prism-9 in P8 and 132 column modes
12301: # ------------------------------------------
12302: #
12303: # P9 terminal in P8 emulation mode and 132 column mode.
12304: #
1.11 millert 12305: prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode,
12306: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
12307: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w,
1.1 millert 12308:
12309: # p12: Prism-12 in ANSI mode
12310: # ---------------------------
12311: #
12312: # See p9 definition.
12313: #
1.11 millert 12314: prism12|p12|P12|MDC Prism-12 in ANSI mode,
12315: use=p9,
1.1 millert 12316:
12317: # p12-w: Prism-12 in 132 column mode
12318: # ----------------------------------
12319: #
12320: # 'Wide' version of p12.
12321: #
1.11 millert 12322: prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode,
12323: use=p9-w,
1.1 millert 12324:
12325: # p12-m: Prism-12 in MDC emulation mode
12326: # -------------------------------------
12327: #
12328: # P12 terminal in MDC emulation mode.
12329: # Similar to p8 definition.
12330: # Insertion and deletion operations possible.
12331: #
1.11 millert 12332: prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode,
12333: use=p9-8,
1.1 millert 12334:
12335: # p12-m-w: Prism-12 in MDC emulation and 132 column modes
12336: # -------------------------------------------------------
12337: #
12338: # P12 terminal in MDC emulation mode and 132 column mode.
12339: #
1.11 millert 12340: prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode,
12341: use=p9-8-w,
1.1 millert 12342:
12343: # p14: Prism-14 in ANSII mode
12344: # ---------------------------
12345: #
12346: # See p9 definition.
12347: #
1.11 millert 12348: prism14|p14|P14|MDC Prism-14 in ANSII mode,
12349: use=p9,
1.1 millert 12350:
12351: # p14-w: Prism-14 in 132 column mode
12352: # ----------------------------------
12353: #
12354: # 'Wide' version of p14.
12355: #
1.11 millert 12356: prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode,
12357: use=p9-w,
1.1 millert 12358:
12359: # p14-m: Prism-14 in MDC emulation mode
12360: # -------------------------------------
12361: #
12362: # P14 terminal in MDC emulation mode.
12363: # Similar to p8 definition.
12364: # Insertion and deletion operations possible.
12365: #
1.11 millert 12366: prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode,
12367: use=p9-8,
1.1 millert 12368:
12369: # p14-m-w: Prism-14 in MDC emulation and 132 column modes
12370: # -------------------------------------------------------
12371: #
12372: # P14 terminal in MDC emulation mode and 132 column mode.
12373: #
1.11 millert 12374: prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode,
12375: use=p9-8-w,
1.1 millert 12376:
12377: # End of McDonnell Information Systems Prism definitions
12378:
12379: # These things were popular in the Pick database community at one time
12380: # From: George Land <georgeland@aol.com> 24 Sep 1996
1.11 millert 12381: p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition,
12382: am, bw, hs, mir,
12383: cols#80, lines#24, ma#1, wsl#78, xmc#1,
12384: bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F,
12385: cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P,
12386: ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U,
12387: kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ,
12388: kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r,
12389: kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r,
12390: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
12391: kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2,
12392: lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M,
12393: pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE,
12394: smul=^C0,
1.1 millert 12395:
12396: #### Microterm (act, mime)
12397: #
12398: # The mime1 entries refer to the Microterm Mime I or Mime II.
12399: # The default mime is assumed to be in enhanced act iv mode.
12400: #
12401:
12402: # New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents
12403: # freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and
12404: # <rmso=^N> since it gets confused and it's too dim anyway. No <ich1>
12405: # since Sytek insists ^S means xoff.
12406: # (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr)
12407: act4|microterm|microterm act iv,
1.11 millert 12408: OTbs, am,
1.1 millert 12409: cols#80, lines#24,
1.11 millert 12410: bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X,
12411: cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c,
12412: cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>,
12413: ed=\037$<2.2*/>, el=\036$<.1*/>, home=^],
12414: il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X,
12415: kcuu1=^Z,
1.1 millert 12416: # The padding on :sr: and :ta: for act5 and mime is a guess and not final.
12417: # The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)...
12418: # (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr)
12419: act5|microterm5|microterm act v,
1.11 millert 12420: kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA, use=act4,
1.1 millert 12421: # Mimes using brightness for standout. Half bright is really dim unless
12422: # you turn up the brightness so far that lines show up on the screen.
12423: mime-fb|full bright mime1,
1.11 millert 12424: is2=^S\E, rmso=^S, smso=^Y, use=mime,
1.1 millert 12425: mime-hb|half bright mime1,
1.11 millert 12426: is2=^Y\E, rmso=^Y, smso=^S, use=mime,
1.1 millert 12427: # (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode
12428: # the more plausible ":do=^J:" -- esr)
12429: # uc was at one time disabled to get around a curses bug, be wary of it
12430: mime|mime1|mime2|mimei|mimeii|microterm mime1,
1.11 millert 12431: OTbs, am,
1.1 millert 12432: cols#80, it#8, lines#24, vt#9,
12433: bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X,
1.11 millert 12434: cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c,
12435: cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>,
12436: il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K,
12437: kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U,
1.1 millert 12438: # These termcaps (for mime2a) put the terminal in low intensity mode
12439: # since high intensity mode is so obnoxious.
12440: mime2a-s|microterm mime2a (emulating an enhanced soroc iq120),
1.11 millert 12441: OTbs, am,
1.1 millert 12442: cols#80, lines#24,
12443: bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
1.11 millert 12444: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED,
12445: dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^,
1.1 millert 12446: il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J,
1.11 millert 12447: kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7,
12448: smir=\EE, smso=\E\:, smul=\E6,
1.1 millert 12449: # This is the preferred mode (but ^X can't be used as a kill character)
12450: mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52),
1.11 millert 12451: OTbs,
12452: cols#80, it#8, lines#24,
1.1 millert 12453: bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
12454: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N,
12455: dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I,
1.11 millert 12456: il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED,
12457: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9,
1.1 millert 12458: rmul=\E5, smir=^O, smso=\E8, smul=\E4,
12459: # (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr)
12460: mime3a|mime1 emulating 3a,
1.11 millert 12461: am@,
12462: kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a,
1.1 millert 12463: mime3ax|mime-3ax|mime1 emulating enhanced 3a,
1.11 millert 12464: it#8,
12465: dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>, use=mime3a,
1.1 millert 12466: # Wed Mar 9 18:53:21 1983
12467: # We run our terminals at 2400 baud, so there might be some timing problems at
12468: # higher speeds. The major improvements in this model are the terminal now
12469: # scrolls down and insert mode works without redrawing the rest of the line
12470: # to the right of the cursor. This is done with a bit of a kludge using the
12471: # exit graphics mode to get out of insert, but it does not appear to hurt
12472: # anything when using vi at least. If you have some users using act4s with
12473: # programs that use curses and graphics mode this could be a problem.
1.11 millert 12474: mime314|mm314|mime 314,
12475: am,
12476: cols#80, lines#24,
12477: clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z,
12478: dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H,
12479: kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S,
1.1 millert 12480: # Microterm mime 340 from University of Wisconsin
12481: mm340|mime340|mime 340,
12482: cols#80, lines#24,
12483: clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
12484: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
12485: dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>,
1.11 millert 12486: el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,,
12487: kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J,
1.1 millert 12488: # This came from University of Wisconsin marked "astro termcap for jooss".
12489: # (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:";
12490: # also added <rmam>/<smam> based on the init string -- esr)
12491: mt4520-rv|micro-term 4520 reverse video,
12492: am, hs, msgr, xenl, xon,
12493: cols#80, it#8, lines#24, wsl#80,
12494: bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M,
12495: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
12496: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
12497: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.11 millert 12498: cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
12499: dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h,
12500: fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@,
1.1 millert 12501: ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
12502: is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J,
1.11 millert 12503: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
12504: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H,
12505: ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100,
12506: ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m,
1.1 millert 12507: rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J,
1.11 millert 12508: sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m,
12509: tbc=\E[g, tsl=\E[25;1H,
1.1 millert 12510:
12511: # Fri Aug 5 08:11:57 1983
12512: # This entry works for the ergo 4000 with the following setups:
12513: # ansi,wraparound,newline disabled, xon/xoff disabled in both
12514: # setup a & c.
12515: #
12516: # WARNING!!! There are multiple versions of ERGO 4000 microcode
12517: # Be advised that very early versions DO NOT WORK RIGHT !!
12518: # Microterm does have a ROM exchange program- use it or lose big
12519: # (ergo400: added <rmam>/<smam> based on the init string -- esr)
1.11 millert 12520: ergo4000|microterm ergo 4000,
12521: da, db, msgr,
12522: cols#80, lines#66,
12523: bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B,
12524: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
12525: dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>,
12526: el=\E[0K$<13>, ht=^I, il=\E[1L$<5*>, ind=\ED$<20*>,
12527: is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>,
12528: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
12529: kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3,
12530: lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l,
12531: rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>,
12532: smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>,
12533: smso=\E[7m$<20>,
1.1 millert 12534:
12535: #### NCR
12536: #
12537: # NCR's terminal group was merged with AT&T's when AT&T bought the company.
12538: # For what happened to that group, see the ADDS section.
12539: #
12540: # There is an NCR4103 terminal that's just a re-badged Wyse-50.
12541: #
12542:
12543: # The following vendor-supplied termcaps were captured from the Boundless
12544: # Technologies site, 8 March 1998. I removed all-upper-case names that were
12545: # identical, except for case, to lower-case ones. I also uncommented the acsc
12546: # capabilities.X
12547: #
1.14 millert 12548: # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
1.1 millert 12549: # DEC vt200/300 with color capabilities added.
1.11 millert 12550: ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
12551: colors#8, pairs#64,
12552: op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300an,
1.14 millert 12553: # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
1.1 millert 12554: # DEC vt200/300 with color capabilities added.
1.11 millert 12555: ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard,
12556: colors#8, pairs#64,
12557: op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300wan,
1.14 millert 12558: # The Intecolor emulation of the NCR 2900/260C color terminal is basically a
12559: # DEC vt200/300 with color capabilities added.
1.11 millert 12560: ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard,
12561: colors#8, pairs#64,
12562: op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300pp,
1.1 millert 12563: # The Intecolor emulation of the NCR 2900/260C color terminal is basicly a
12564: # DEC vt200/300 with color capabilities added.
1.11 millert 12565: ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode,
12566: colors#8, pairs#64,
12567: op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ncr260vt300wpp,
1.1 millert 12568: # This definition for ViewPoint supports several attributes. This means
12569: # that it has magic cookies (extra spaces where the attributes begin).
12570: # Some applications do not function well with magic cookies. The System
12571: # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
12572: # If supporting various attributes is not vital, 'xmc#1' and the extra
12573: # attributes can be removed.
12574: # Mapping to ASCII character set ('acsc' capability) can also be
12575: # restored if needed.
1.11 millert 12576: ncr260vppp|NCR 2900_260 viewpoint,
12577: am, bw, hs, km, mc5i, mir, msgr, xon,
12578: cols#80, lines#24, nlab#32, xmc#1,
12579: acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
12580: cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5,
12581: cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>,
12582: cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>,
12583: cvvis=\E`5, dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c,
12584: ed=\Ek$<2>, el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I,
12585: hts=\E1, il1=\EM$<2>, ind=\n$<2>, invis=\EG1,
12586: is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
12587: kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ,
12588: kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F,
12589: kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r,
12590: kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r,
12591: kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r,
12592: kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r,
12593: kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r,
12594: kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r,
12595: kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r,
12596: kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ,
12597: kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R,
12598: mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>,
12599: nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003,
12600: rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
12601: rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
12602: sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq,
12603: smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF,
12604: ncr260vpwpp|NCR 2900_260 viewpoint wide mode,
1.1 millert 12605: cols#132,
1.11 millert 12606: cup=\Ea%i%p1%dR%p2%dC$<30>,
12607: is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
12608: rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>,
12609: use=ncr260vppp,
12610: ncr260vt100an|NCR 2900_260 vt100 with ansi kybd,
12611: am, hs, mir, msgr, xenl, xon,
12612: cols#80, lines#24, nlab#32,
12613: acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12614: blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12615: clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
12616: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>,
12617: cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
1.1 millert 12618: cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
1.11 millert 12619: cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
12620: cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
12621: dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
12622: ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>,
12623: fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I,
12624: hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>,
12625: il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>,
12626: invis=\E[8m,
12627: is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12628: ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs,
12629: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12630: kdch1=\E[3~, kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
12631: kf4=\EOS, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~,
12632: kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>, rc=\E8,
12633: rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l,
12634: rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m,
12635: rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12636: sc=\E7,
12637: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
12638: sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h,
12639: smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g,
12640: tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
1.1 millert 12641: ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd,
12642: cols#132,
1.11 millert 12643: cup=\E[%i%p1%d;%p2%dH$<30>,
12644: is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12645: rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12646: use=ncr260vt100an,
12647: ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd,
12648: is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12649: ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
12650: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
12651: kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~,
12652: lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>,
12653: rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12654: smkx=\E=,
12655: use=ncr260vt100an,
1.1 millert 12656: ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd,
12657: cols#132,
1.11 millert 12658: cup=\E[%i%p1%d;%p2%dH$<30>,
12659: is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12660: rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12661: use=ncr260vt100pp,
12662: ncr260vt200an|NCR 2900_260 vt200 with ansi kybd,
12663: am, hs, mir, msgr, xenl, xon,
12664: cols#80, lines#24, nlab#32,
12665: acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12666: blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12667: clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
12668: csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
12669: cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
12670: cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
12671: cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
12672: cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
12673: dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
12674: ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
12675: fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
12676: ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
12677: ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
12678: is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12679: ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs,
12680: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12681: kdch1=\E[3~, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\E[21~,
12682: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
12683: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
12684: kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf21=\E[31~,
12685: kf22=\E[32~, kf23=\E[33~, kf24=\E[34~, kf25=\E[35~,
12686: kf26=\E[1~, kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR,
12687: kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
12688: kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
12689: kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
12690: kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
12691: mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
12692: ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
12693: rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
12694: rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12695: sc=\E7,
12696: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
12697: sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
12698: smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
12699: tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
1.1 millert 12700: ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd,
1.11 millert 12701: cols#132,
12702: cup=\E[%i%p1%d;%p2%dH$<30>,
12703: is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
12704: rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>,
12705: use=ncr260vt200an,
12706: ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd,
12707: ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
12708: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
12709: kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
12710: lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
12711: use=ncr260vt200an,
1.1 millert 12712: ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd,
1.11 millert 12713: cols#132,
12714: cup=\E[%i%p1%d;%p2%dH$<30>,
12715: is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12716: rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12717: use=ncr260vt200pp,
12718: ncr260vt300an|NCR 2900_260 vt300 with ansi kybd,
12719: am, hs, mir, msgr, xenl, xon,
12720: cols#80, lines#24, nlab#32,
12721: acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
12722: blink=\E[5m, bold=\E[1m, civis=\E[?25l,
12723: clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>,
12724: csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>,
12725: cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>,
12726: cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>,
12727: cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>,
12728: cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>,
12729: dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~,
12730: ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>,
12731: fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH,
12732: ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>,
12733: ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m,
12734: is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12735: ka1=\EOw, ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs,
12736: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
12737: kdch1=\E[3~, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\E[21~,
12738: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
12739: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
12740: kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf21=\E[31~,
12741: kf22=\E[32~, kf23=\E[33~, kf24=\E[34~, kf25=\E[35~,
12742: kf26=\E[1~, kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR,
12743: kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~,
12744: kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~,
12745: kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~,
12746: kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~,
12747: mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
12748: ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l,
12749: rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m,
12750: rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12751: sc=\E7,
12752: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<20>,
12753: sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h,
12754: smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
12755: tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>,
12756: ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd,
12757: cols#132,
12758: cup=\E[%i%p1%d;%p2%dH$<30>,
12759: is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
12760: rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>,
12761: use=ncr260vt300an,
12762: ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd,
12763: ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D,
12764: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~,
12765: kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
12766: lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=,
12767: use=ncr260vt300an,
1.1 millert 12768: NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd,
1.11 millert 12769: cols#132,
12770: cup=\E[%i%p1%d;%p2%dH$<30>,
12771: is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12772: rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>,
12773: use=ncr260vt300pp,
1.1 millert 12774: # This terminfo file contains color capabilities for the Wyse325 emulation of
12775: # the NCR 2900/260C color terminal. Because of the structure of the command
12776: # (escape sequence) used to set color attributes, one of the fore/background
12777: # colors must be preset to a given value. I have set the background color to
12778: # black. The user can change this setup by altering the last section of the
12779: # 'setf' definition. The escape sequence to set color attributes is
12780: # ESC d y <foreground_color> <background_color> 1
12781: # In addition, the background color can be changed through the desk accessories.
12782: # The capablitiy 'op' sets colors to green on black (default combination).
12783: #
12784: # NOTE: The NCR Unix System Administrator's Shell will not function properly
12785: # if the 'pairs' capability is defined. Un-Comment the 'pairs'
12786: # capability and recompile if you wish to have it included.
12787: #
1.11 millert 12788: ncr260wy325pp|NCR 2900_260 wyse 325,
12789: am, bw, hs, km, mc5i, mir, msgr, xon,
12790: colors#16, cols#80, lines#24, ncv#33, nlab#32,
12791: acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
12792: cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M,
12793: cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
12794: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
12795: cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
12796: ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I,
12797: hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
12798: is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12799: kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
12800: kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI,
12801: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET,
12802: kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r,
12803: kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r,
12804: kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r,
12805: kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r,
12806: kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r,
12807: kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
12808: kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ,
12809: kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
12810: mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
12811: nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
12812: rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
12813: rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12814: setb=\s,
12815: setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>,
12816: sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/,
12817: smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
12818: tsl=\EF,
12819: ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode,
12820: cols#132,
12821: cup=\Ea%i%p1%dR%p2%dC$<30>,
12822: is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12823: rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12824: use=ncr260wy325pp,
1.1 millert 12825: # This definition for Wyse 350 supports several attributes. This means
12826: # that it has magic cookies (extra spaces where the attributes begin).
12827: # Some applications do not function well with magic cookies. The System
12828: # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
12829: # If supporting various attributes is not vital, 'xmc#1' and the extra
12830: # attributes can be removed.
12831: # Mapping to ASCII character set ('acsc' capability) can also be
12832: # restored if needed.
12833: # In addition, color capabilities have been added to this file. The drawback,
12834: # however, is that the background color has to be black. The foreground colors
12835: # are numbered 0 through 15.
12836: #
12837: # NOTE: The NCR Unix System Administrator's Shell does not function properly
12838: # with the 'pairs' capability defined as below. If you wish to
12839: # have it included, Un-comment it and recompile (using 'tic').
12840: #
1.11 millert 12841: ncr260wy350pp|NCR 2900_260 wyse 350,
12842: am, bw, hs, km, mc5i, mir, msgr, xon,
12843: colors#16, cols#80, lines#24, ncv#33, nlab#32, xmc#1,
12844: acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
12845: cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
12846: cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
12847: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>,
12848: cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
12849: ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I,
12850: hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1,
12851: is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12852: kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
12853: kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
12854: kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
12855: kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
12856: kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
12857: kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
12858: kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
12859: kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
12860: kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
12861: khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
12862: mc0=\EP$<10>, mc4=^T, mc5=^R,
12863: mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>,
12864: nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0,
12865: rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
12866: rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12867: setb=\s,
12868: setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>,
12869: sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/,
12870: smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0,
12871: tsl=\EF,
12872: ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode,
12873: cols#132,
12874: cup=\Ea%i%p1%dR%p2%dC$<30>,
12875: is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
12876: rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
12877: use=ncr260wy350pp,
1.1 millert 12878: # This definition for Wyse 50+ supports several attributes. This means
12879: # that it has magic cookies (extra spaces where the attributes begin).
12880: # Some applications do not function well with magic cookies. The System
12881: # Administrator's Shell in NCR Unix SVR4 1.03 is one such application.
12882: # If supporting various attributes is not vital, 'xmc#1' and the extra
12883: # attributes can be removed.
12884: # Mapping to ASCII character set ('acsc' capability) can also be
12885: # restored if needed.
12886: # (ncr260wy50+pp: originally contained commented-out
12887: # <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr)
1.11 millert 12888: ncr260wy50+pp|NCR 2900_260 wyse 50+,
12889: am, bw, hs, km, mc5i, mir, msgr, xon,
12890: cols#80, lines#24, nlab#32, xmc#1,
12891: acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
12892: cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M,
12893: cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
12894: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>,
12895: cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c,
12896: ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>,
12897: ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>,
12898: invis=\EG1,
12899: is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12900: kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H,
12901: kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L,
12902: kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r,
12903: kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
12904: kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r,
12905: kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r,
12906: kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r,
12907: kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r,
12908: kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r,
12909: khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP,
12910: mc0=\EP$<10>, mc4=^T, mc5=^R,
12911: mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>,
12912: nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
12913: rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
12914: rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12915: sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq,
12916: smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF,
12917: ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode,
12918: cols#132,
12919: cup=\Ea%i%p1%dR%p2%dC$<30>,
12920: is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
12921: rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>,
12922: use=ncr260wy50+pp,
12923: ncr260wy60pp|NCR 2900_260 wyse 60,
12924: am, bw, hs, km, mc5i, mir, msgr, xon,
1.1 millert 12925: cols#80, lines#24, nlab#32,
1.11 millert 12926: acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2,
12927: cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1,
12928: cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>,
12929: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>,
12930: cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c,
12931: ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>,
12932: ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>,
12933: invis=\EG1,
12934: is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12935: kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ,
12936: kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK,
12937: kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
12938: kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r,
12939: kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r,
12940: kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r,
12941: kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r,
12942: kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r,
12943: kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r,
12944: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
12945: kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R,
12946: mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>,
12947: nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed.,
12948: rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20,
12949: rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12950: sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/,
12951: smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>,
12952: tsl=\EF,
12953: ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode,
12954: cols#132,
12955: cup=\Ea%i%p1%dR%p2%dC$<30>,
12956: is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12957: rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>,
12958: use=ncr260wy60pp,
12959: ncr160vppp|NCR 2900_160 viewpoint,
12960: use=ncr260vppp,
12961: ncr160vpwpp|NCR 2900_160 viewpoint wide mode,
12962: use=ncr260vpwpp,
12963: ncr160vt100an|NCR 2900_160 vt100 with ansi kybd,
12964: use=ncr260vt100an,
12965: ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd,
12966: use=ncr260vt100pp,
1.1 millert 12967: ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd,
1.11 millert 12968: use=ncr260vt100wan,
1.1 millert 12969: ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd,
1.11 millert 12970: use=ncr260vt100wpp,
12971: ncr160vt200an|NCR 2900_160 vt200 with ansi kybd,
12972: use=ncr260vt200an,
12973: ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd,
12974: use=ncr260vt200pp,
1.1 millert 12975: ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd,
1.11 millert 12976: use=ncr260vt200wan,
1.1 millert 12977: ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd,
1.11 millert 12978: use=ncr260vt200wpp,
12979: ncr160vt300an|NCR 2900_160 vt300 with ansi kybd,
12980: use=ncr260vt300an,
12981: ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd,
12982: use=ncr260vt300pp,
1.1 millert 12983: ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd,
1.11 millert 12984: use=ncr260vt300wan,
1.1 millert 12985: ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd,
1.11 millert 12986: use=ncr260vt300wpp,
12987: ncr160wy50+pp|NCR 2900_160 wyse 50+,
12988: use=ncr260wy50+pp,
12989: ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode,
12990: use=ncr260wy50+wpp,
12991: ncr160wy60pp|NCR 2900_160 wyse 60,
12992: use=ncr260wy60pp,
12993: ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode,
12994: use=ncr260wy60wpp,
1.1 millert 12995: ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal,
1.11 millert 12996: am, hs, mc5i, mir, msgr, xon,
12997: cols#80, it#8, lines#24, nlab#32,
12998: acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~,
12999: bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>,
13000: clear=\E[2J\E[1;1H$<300>, cr=^M,
13001: csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>,
13002: cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>,
13003: cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>,
13004: cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>,
13005: cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>,
13006: dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>,
13007: ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>,
13008: enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>,
13009: ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>,
13010: ind=\ED,
13011: is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>,
13012: kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D,
13013: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP,
13014: kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE,
13015: rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>,
13016: rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>,
13017: rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
13018: sc=\E7,
13019: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>,
13020: sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>,
13021: smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>,
13022: tsl=\E[>+1$<70>,
13023: ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal,
13024: cols#132,
13025: is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>,
13026: rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>,
13027: use=ncrvt100an,
1.1 millert 13028: #
13029: # Vendor-supplied NCR termcaps end here
13030:
13031: # NCR7900 DIP switches:
13032: #
13033: # Switch A:
13034: # 1-4 - Baud Rate
13035: # 5 - Parity (Odd/Even)
13036: # 6 - Don't Send or Do Send Spaces
13037: # 7 - Parity Enable
13038: # 8 - Stop Bits (One/Two)
13039: #
13040: # Switch B:
13041: # 1 - Upper/Lower Shift
13042: # 2 - Typewriter Shift
13043: # 3 - Half Duplex / Full Duplex
13044: # 4 - Light/Dark Background
13045: # 5-6 - Carriage Return Without / With Line Feed
13046: # 7 - Extended Mode
13047: # 8 - Suppress Keyboard Display
13048: #
13049: # Switch C:
13050: # 1 - End of line entry disabled/enabled
13051: # 2 - Conversational mode / (Local?) Mode
13052: # 3 - Control characters displayed / not displayed
13053: # 4 - (2-wire?) / 4-wire communications
13054: # 5 - RTS on and off for each character
13055: # 6 - (50Hz?) / 60 Hz
13056: # 7 - Exit after level zero diagnostics
13057: # 8 - RS-232 interface
13058: #
13059: # Switch D:
13060: # 1 - Reverse Channel (yes / no)
13061: # 2 - Manual answer (no / yes)
13062: # 3-4 - Cursor appearance
13063: # 5 - Communication Rate
13064: # 6 - Enable / Disable EXT turnoff
13065: # 7 - Enable / Disable CR turnoff
13066: # 8 - Enable / Disable backspace
13067: #
1.14 millert 13068: # Since each attribute parameter is 0 or 1, we shift each attribute (standout,
13069: # reverse, blink, dim, and underline) the appropriate number of bits (by
13070: # multiplying the 0 or 1 by a correct factor to shift) so the bias character,
13071: # '@' is (effectively) "or"ed with each attribute to generate the proper third
13072: # character in the <ESC>0 sequence. The <sgr> string implements the following
13073: # equation:
13074: #
13075: # ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) =>
13076: # ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17))
13077: #
13078: # Where: P1 <==> Standout attribute parameter
13079: # P2 <==> Underline attribute parameter
13080: # P3 <==> Reverse attribute parameter
13081: # P4 <==> Blink attribute parameter
13082: # P5 <==> Dim attribute parameter
1.1 millert 13083: # From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO.
1.11 millert 13084: ncr7900i|ncr7900|ncr 7900 model 1,
13085: am, bw, ul,
13086: cols#80, lines#24, xmc#1,
13087: bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
13088: cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J,
13089: is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F,
13090: kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@,
13091: rmul=\E0@,
13092: sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c,
13093: sgr0=\E0@, smso=\E0Q, smul=\E0`,
13094: ncr7900iv|ncr 7900 model 4,
13095: am, bw, eslok, hs,
13096: cols#80, lines#24,
13097: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J,
13098: cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1,
13099: fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H,
13100: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET,
13101: kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
13102: khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J,
13103: tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo,
1.14 millert 13104: # Warning: This terminal will lock out the keyboard when it receives a CTRL-D.
13105: # The user can enter a CTRL-B to get out of this locked state.
13106: # In <hpa>, we want to output the character given by the formula:
13107: # ((col / 10) * 16) + (col % 10) where "col" is "p1"
1.11 millert 13108: ncr7901|ncr 7901 model,
13109: am, bw, ul,
13110: cols#80, lines#24,
13111: bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M,
13112: cub1=^H, cud1=^J, cuf1=^F,
13113: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A,
13114: ed=\Ek, el=\EK,
13115: hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J,
13116: is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z,
13117: khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O,
13118: sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016,
13119: sgr0=^O, smso=\E0Q\016, smul=\E0`\016,
13120: vpa=\013%p1%{64}%+%c,
1.1 millert 13121:
13122: #### Perkin-Elmer (Owl)
13123: #
13124: # These are official terminfo entries from within Perkin-Elmer.
13125: #
13126:
1.11 millert 13127: bantam|pe550|pe6100|perkin elmer 550,
13128: OTbs,
13129: cols#80, lines#24,
13130: bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
13131: cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13132: el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA,
13133: fox|pe1100|perkin elmer 1100,
13134: OTbs, am,
13135: cols#80, lines#24,
13136: bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
13137: cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13138: ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003,
13139: home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3,
13140: owl|pe1200|perkin elmer 1200,
13141: OTbs, am, in,
13142: cols#80, lines#24,
13143: bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J,
13144: cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13145: dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>,
13146: el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH,
13147: hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>,
13148: kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD,
13149: kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA,
13150: rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3,
13151: pe1251|pe6300|pe6312|perkin elmer 1251,
13152: am,
13153: cols#80, it#8, lines#24, pb#300, vt#8, xmc#1,
13154: bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC,
13155: cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA,
13156: ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J,
13157: kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE,
13158: kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3,
1.1 millert 13159: # (pe7000m: this had
13160: # rmul=\E!\0, smul=\E!\040,
13161: # which is probably wrong, it collides with kf0
1.11 millert 13162: pe7000m|perkin elmer 7000 series monochrome monitor,
13163: am,
13164: cols#80, lines#24,
13165: bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB,
13166: cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
13167: ed=\EJ, el=\EI, home=\EH, ind=^J,
13168: is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V,
13169: kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A,
13170: kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E,
13171: kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S,
13172: ll=\ES7\s, ri=\ER,
1.1 millert 13173: pe7000c|perkin elmer 7000 series colour monitor,
1.11 millert 13174: is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0,
13175: rmul=\E!\0, smso=\Eb2, smul=\E!\s,
13176: use=pe7000m,
1.1 millert 13177:
13178: #### Sperry Univac
13179: #
13180: # Sperry Univac has merged with Burroughs to form Unisys.
13181: #
13182:
13183: # This entry is for the Sperry UTS30 terminal running the TTY
13184: # utility under control of CP/M Plus 1R1. The functionality
13185: # provided is comparable to the DEC vt100.
13186: # (uts30: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 13187: uts30|sperry uts30 with cp/m@1R1,
13188: am, bw, hs,
13189: cols#80, lines#24, wsl#40,
13190: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13191: bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L,
13192: cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c,
13193: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB,
13194: cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH,
13195: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM,
13196: dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H,
13197: ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN,
13198: ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H,
13199: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H,
13200: rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI,
13201: rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m,
13202: rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
13203: sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m,
13204: smul=\E[4m, tsl=\E], uc=\EPB,
1.1 millert 13205:
13206: #### Tandem
13207: #
13208: # Tandem builds these things for use with its line of fault-tolerant
13209: # transaction-processing computers. They aren't generally available
13210: # on the merchant market, and so are fairly uncommon.
13211: #
13212:
13213: tandem6510|adm3a repackaged by Tandem,
1.11 millert 13214: use=adm3a,
1.1 millert 13215:
13216: # A funny series of terminal that TANDEM uses. The actual model numbers
13217: # have a fourth digit after 653 that designates minor variants. These are
13218: # natively block-mode and rather ugly, but they have a character mode which
13219: # this doubtless(?) exploits. There is a 6520 that is slightly dumber.
13220: # (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also,
13221: # removed <if=/usr/share/tabset/tandem653>, no such file -- esr)
13222: tandem653|t653x|Tandem 653x multipage terminal,
1.11 millert 13223: OTbs, am, da, db, hs,
1.1 millert 13224: cols#80, lines#24, wsl#64, xmc#1,
13225: clear=\EI, cub1=^H, cud1=^J, cuf1=\EC,
1.11 millert 13226: cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r,
13227: ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s,
13228: rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo,
1.1 millert 13229:
13230: #### Tandy/Radio Shack
13231: #
13232: # Tandy has a line of VDTs distinct from its microcomputers.
13233: #
13234:
13235: dmterm|deskmate terminal,
13236: am, bw,
13237: cols#80, lines#24,
1.11 millert 13238: bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H,
13239: cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
13240: cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I,
13241: ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB,
13242: kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4,
13243: kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0,
13244: khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6,
13245: lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@,
13246: use=adm+sgr,
1.1 millert 13247: dt100|dt-100|Tandy DT-100 terminal,
13248: xon,
13249: cols#80, lines#24, xmc#1,
1.11 millert 13250: acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
1.1 millert 13251: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
1.11 millert 13252: csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
13253: cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
13254: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
13255: il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D,
13256: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i,
13257: kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~,
13258: kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H,
13259: knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5,
13260: lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m,
13261: sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
13262: dt100w|dt-100w|Tandy DT-100 terminal (wide mode),
13263: cols#132, use=dt100,
1.1 millert 13264: dt110|Tandy DT-110 emulating ansi,
13265: xon,
13266: cols#80, lines#24,
1.11 millert 13267: acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l,
1.1 millert 13268: clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M,
1.11 millert 13269: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[0B, cuf1=\E[C,
13270: cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[0A, dch1=\E[0P,
13271: dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H,
13272: ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B,
13273: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K,
13274: kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~,
13275: kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~,
13276: khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1,
13277: lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9,
13278: lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
13279: smacs=^N, smso=\E[7m, smul=\E[4m,
13280: pt210|TRS-80 PT-210 printing terminal,
1.1 millert 13281: hc, os,
13282: cols#80,
13283: bel=^G, cr=^M, cud1=^J, ind=^J,
13284:
13285: #### Tektronix (tek)
13286: #
13287: # Tektronix tubes are graphics terminals. Most of them use modified
13288: # oscilloscope technology incorporating a long-persistence green phosphor,
13289: # and support vector graphics on a main screen with an attached "dialogue
13290: # area" for interactive text.
13291: #
13292:
1.11 millert 13293: tek|tek4012|tektronix 4012,
13294: OTbs, os,
13295: cols#75, lines#35,
13296: bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J,
13297: ff=\014$<1000>, is2=\E^O,
1.1 millert 13298: # (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
1.11 millert 13299: tek4013|tektronix 4013,
13300: acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012,
13301: tek4014|tektronix 4014,
13302: cols#81, lines#38,
13303: is2=\E\017\E9, use=tek4012,
1.1 millert 13304: # (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
1.11 millert 13305: tek4015|tektronix 4015,
13306: acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014,
13307: tek4014-sm|tektronix 4014 in small font,
13308: cols#121, lines#58,
13309: is2=\E\017\E\:, use=tek4014,
1.1 millert 13310: # (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr)
1.11 millert 13311: tek4015-sm|tektronix 4015 in small font,
13312: acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm,
1.1 millert 13313: # Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay>
13314: #
13315: # You need to have "stty nl2" in effect. Some versions of tset(1) know
13316: # how to set it for you.
13317: #
13318: # It's got the Magic Cookie problem around stand-out mode. If you can't
13319: # live with Magic Cookie, remove the :so: and :se: fields and do without
13320: # reverse video. If you like reverse video stand-out mode but don't want
13321: # it to flash, change the letter 'H' to 'P' in the :so: field.
1.11 millert 13322: tek4023|tektronix 4023,
13323: OTbs, am,
13324: OTdN#4, cols#80, lines#24, vt#4, xmc#1,
13325: OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J,
13326: cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H,
13327: rmso=^_@, smso=^_P,
1.1 millert 13328: # It is recommended that you run the 4025 at 4800 baud or less;
13329: # various bugs in the terminal appear at 9600. It wedges at the
13330: # bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed
13331: # on keyboard don't work. You have to hit BREAK twice to get
13332: # one break at any speed - this is a documented feature.
13333: # Can't use cursor motion because it's memory relative, and
13334: # because it only works in the workspace, not the monitor.
13335: # Same for home. Likewise, standout only works in the workspace.
13336: #
13337: # <el> was commented out since vi and rogue seem to work better
13338: # simulating it with lots of spaces!
13339: #
13340: # <il1> and <il> had 145ms of padding, but that slowed down vi's ^U
13341: # and didn't seem necessary.
13342: #
1.11 millert 13343: tek4024|tek4025|tek4027|tektronix 4024/4025/4027,
13344: OTbs, am, da, db,
13345: cols#80, it#8, lines#34, lm#0,
13346: bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M,
13347: cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r,
13348: cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r,
13349: cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r,
13350: dl=\037dli %p1%d\r\006, dl1=\037dli\r\006,
13351: ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010,
13352: il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r,
13353: ind=^F^J,
13354: is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
13355: rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r,
13356: smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r,
13357: tek4025-17|tek 4025 17 line window,
13358: lines#17, use=tek4025,
13359: tek4025-17-ws|tek 4025 17 line window in workspace,
13360: is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r,
13361: rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r,
13362: smso=\037att e\r,
13363: use=tek4025-17,
13364: tek4025-ex|tek4027-ex|tek 4025/4027 w/!,
13365: is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r,
13366: rmcup=\037com 33\r, smcup=!com 31\r,
13367: use=tek4025,
1.1 millert 13368: # Tektronix 4025a
13369: # From: Doug Gwyn <gwyn@brl-smoke.ARPA>
13370: # The following status modes are assumed for normal operation (replace the
13371: # initial "!" by whatever the current command character is):
13372: # !COM 29 # NOTE: changes command character to GS (^])
13373: # ^]DUP
13374: # ^]ECH R
13375: # ^]EOL
13376: # ^]RSS T
13377: # ^]SNO N
13378: # ^]STO 9 17 25 33 41 49 57 65 73
13379: # Other modes may be set according to communication requirements.
13380: # If the command character is inadvertently changed, termcap can't restore it.
13381: # Insert-character cannot be made to work on both top and bottom rows.
13382: # Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas.
13383: # There also seems to be a problem with vertical motion, perhaps involving
13384: # delete/insert-line, following a typed carriage return. This terminal sucks.
13385: # Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13386: # (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't
13387: # work any more. -- esr)
13388: tek4025a|Tektronix 4025A,
13389: OTbs, OTpt, am, bw, da, db, xon,
13390: cols#80, it#8, lines#34,
1.11 millert 13391: bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^],
13392: cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;,
13393: cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;,
13394: cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;,
13395: dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;,
13396: el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I,
13397: il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;,
13398: rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;,
13399: tbc=\035sto;,
1.1 millert 13400: # From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981
13401: # Here's the command file that I use to get rogue to work on the 4025.
13402: # It should work with any program using the old curses (e.g. it better
13403: # not try to scroll, or cursor addressing won't work. Also, you can't
13404: # see the cursor.)
13405: # (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh)
13406: tek4025-cr|tek 4025 for curses and rogue,
1.11 millert 13407: OTbs, am,
1.1 millert 13408: cols#80, it#8, lines#33,
1.11 millert 13409: clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;,
13410: cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J,
1.1 millert 13411: is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r,
13412: rmcup=\037wor 0, smcup=\037wor 33h,
13413: # next two lines commented out since curses only allows 128 chars, sigh.
13414: # :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\
13415: # :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0:
13416: tek4025ex|4025ex|4027ex|tek 4025 w/!,
1.11 millert 13417: is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r,
13418: rmcup=\037com 33\r, smcup=!com 31\r,
13419: use=tek4025,
13420: tek4105|tektronix 4105,
13421: OTbs, am, mir, msgr, ul, xenl, xt,
13422: cols#79, it#8, lines#29,
13423: acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z,
13424: clear=\E[2J\E[H, cr=^M, cud1=\E[1B, cuf1=\E[1C,
13425: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P,
13426: dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
13427: il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m,
13428: is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B,
13429: kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T,
13430: rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m,
13431: rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m,
13432: smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
13433: smul=\E[=5;<2m, tbc=\E[1g,
1.1 millert 13434:
13435: # (tek4105-30: I added <rmam>/<smam> based on the init string -- esr)
1.11 millert 13436: tek4105-30|4015 emulating 30 line vt100,
13437: am, mir, msgr, xenl, xon,
13438: cols#80, it#8, lines#30, vt#3,
13439: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13440: bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>,
13441: clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13442: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13443: cuf=\E[%p1%dC, cuf1=\E[C$<2>,
13444: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
13445: cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>,
13446: enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, ka1=\EOq,
13447: ka3=\EOs, kb2=\EOr, kbs=^H, kc1=\EOp, kc3=\EOn, kcub1=\EOD,
13448: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kent=\EOM, kf0=\EOy,
13449: kf1=\EOP, kf10=\EOx, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt,
13450: kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, rc=\E8,
13451: rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
13452: rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>,
13453: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
13454: sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;,
13455: sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=,
13456: smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g,
1.1 millert 13457:
13458: # Tektronix 4105 from BRL
13459: # The following setup modes are assumed for normal operation:
13460: # CODE ansi CRLF no DABUFFER 141
13461: # DAENABLE yes DALINES 30 DAMODE replace
13462: # DAVISIBILITY yes ECHO no EDITMARGINS 1 30
13463: # FLAGGING input INSERTREPLACE replace LFCR no
13464: # ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B
13465: # SELECTCHARSET G1 0 TABS -2
13466: # Other setup modes may be set for operator convenience or communication
13467: # requirements; I recommend
13468: # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
13469: # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
13470: # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
13471: # GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1
13472: # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
13473: # PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132
13474: # XMTDELAY 0
13475: # and factory color maps. After setting these modes, save them with NVSAVE. No
13476: # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13477: # "IC" cannot be used in combination with "im" & "ei".
13478: # "tek4105a" is just a guess:
13479: tek4105a|Tektronix 4105,
13480: OTbs, OTpt, msgr, xon,
13481: OTkn#8, cols#80, it#8, lines#30, vt#3,
13482: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13483: civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
13484: cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13485: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13486: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13487: cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
13488: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13489: ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
13490: il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
13491: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13492: kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
13493: kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
13494: lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
13495: rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
1.11 millert 13496: rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
13497: rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
13498: sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
1.1 millert 13499: smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
13500:
13501: #
13502: # Tektronix 4106/4107/4109 from BRL
13503: # The following setup modes are assumed for normal operation:
13504: # CODE ansi COLUMNMODE 80 CRLF no
13505: # DABUFFER 141 DAENABLE yes DALINES 32
13506: # DAMODE replace DAVISIBILITY yes ECHO no
13507: # EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace
13508: # LFCR no LOCKKEYBOARD no ORIGINMODE relative
13509: # PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0
13510: # TABS -2
13511: # Other setup modes may be set for operator convenience or communication
13512: # requirements; I recommend
13513: # ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes
13514: # BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0
13515: # EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU>
13516: # GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3
13517: # IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>"
13518: # PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132
13519: # XMTDELAY 0
13520: # and factory color maps. After setting these modes, save them with NVSAVE. No
13521: # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
13522: # "IC" cannot be used in combination with "im" & "ei".
13523: tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109,
13524: msgr, xon,
13525: cols#80, it#8, lines#32, vt#3,
13526: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z,
13527: civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J,
13528: cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr,
13529: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13530: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13531: cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1,
13532: dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M,
13533: ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
13534: il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1,
13535: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
13536: kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ,
13537: kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5,
13538: lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM,
13539: rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1,
13540: rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
13541: rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>,
13542: sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h,
13543: smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g,
13544:
1.11 millert 13545: tek4107|tek4109|tektronix terminals 4107 4109,
13546: OTbs, am, mir, msgr, ul, xenl, xt,
13547: cols#79, it#8, lines#29,
13548: bel=^G, blink=\E%!1\E[5m$<2>\E%!0,
13549: bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M,
13550: cub1=^H, cud1=^J, cuf1=\EC,
13551: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3,
13552: dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J,
13553: kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
13554: rev=\E%!1\E[7m$<2>\E%0, ri=\EI,
13555: rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0,
13556: sgr=\E%%!1\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m\E%%!0,
13557: sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0,
13558: smul=\E%!1\E[4m$<2>\E%!0,
1.1 millert 13559: # Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s;
13560: # see the note attached to tek4207.
13561: tek4207-s|Tektronix 4207 with sysline but no memory,
13562: eslok, hs,
13563: dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8,
13564: is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
13565: is2=\E7\E[?6l\E[2K\E[?6h\E8,
1.11 millert 13566: tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107,
1.1 millert 13567:
13568: # The 4110 series may be a wonderful graphics series, but they make the 4025
13569: # look good for screen editing. In the dialog area, you can't move the cursor
13570: # off the bottom line. Out of the dialog area, ^K moves it up, but there
13571: # is no way to scroll.
13572: #
13573: # Note that there is a floppy for free from Tek that makes the
13574: # 4112 emulate the vt52 (use the vt52 termcap). There is also
13575: # an expected enhancement that will use ANSI standard sequences.
13576: #
13577: # 4112 in non-dialog area pretending to scroll. It really wraps
13578: # but vi is said to work (more or less) in this mode.
13579: #
13580: # 'vi' works reasonably well with this entry.
13581: #
1.11 millert 13582: otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series,
13583: am,
13584: cols#80, lines#34,
13585: bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J,
13586: rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0,
1.1 millert 13587: # The 4112 with the ANSI compatibility enhancement
13588: tek4112|tek4114|tektronix 4110 series,
1.11 millert 13589: OTbs, am, db,
1.1 millert 13590: cols#80, lines#34,
13591: cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cuf1=\E[C,
1.11 millert 13592: cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, dl1=\E[M,
13593: ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L,
13594: ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8,
13595: rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m,
1.1 millert 13596: tek4112-nd|4112 not in dialog area,
13597: OTns,
1.11 millert 13598: cuu1=^K, use=tek4112,
1.1 millert 13599: tek4112-5|4112 in 5 line dialog area,
1.11 millert 13600: lines#5, use=tek4112,
1.1 millert 13601: # (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake;
13602: # removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3.
13603: # Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were
13604: # previously \0410 and \0411 sequences...I don't *think* they were supposed
13605: # to be 4-digit octal -- esr)
13606: tek4113|tektronix 4113 color graphics with 5 line dialog area,
1.11 millert 13607: OTbs, am, da, eo,
1.1 millert 13608: cols#80, lines#5,
13609: clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0,
13610: flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
13611: is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0,
13612: tek4113-34|tektronix 4113 color graphics with 34 line dialog area,
13613: lines#34,
1.11 millert 13614: is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113,
1.1 millert 13615: # :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not
13616: # supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up .
13617: # :vb: needs enough delay to let you see the background color being toggled.
13618: tek4113-nd|tektronix 4113 color graphics with no dialog area,
1.11 millert 13619: OTbs, am, eo,
1.1 millert 13620: cols#80, it#8, lines#34,
13621: clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K,
1.11 millert 13622: cvvis=\ELZ\EKA0,
1.1 millert 13623: flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0,
1.11 millert 13624: home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @,
13625: ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0,
1.1 millert 13626: # This entry is from Tek. Inc. (Brian Biehl)
13627: # (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr)
13628: otek4115|Tektronix 4115,
13629: OTbs, am, da, db, eo,
13630: cols#80, it#8, lines#34,
13631: cbt=\E[Z, clear=\E[H\E[2J,
1.11 millert 13632: cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B,
13633: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
13634: cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J,
13635: el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100,
13636: il1=\E[L,
1.1 millert 13637: is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m,
1.11 millert 13638: kbs=^H, ri=\EM, rmam=\E[?7l,
13639: rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l,
13640: rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h,
13641: smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m,
13642: smul=\E[4m,
13643: tek4115|newer tektronix 4115 entry with more ANSI capabilities,
13644: am, xon,
13645: cols#80, lines#34,
13646: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J,
13647: cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
13648: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13649: cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM,
13650: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG,
13651: ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL,
13652: il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D,
13653: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H,
13654: rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l,
13655: rmso=\E[m, rmul=\E[m,
13656: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
13657: sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[2g,
13658: vpa=\E[%p1%{1}%+%dd,
1.1 millert 13659: # The tek4125 emulates a vt100 incorrectly - the scrolling region
13660: # command is ignored. The following entry replaces <csr> with the needed
13661: # <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125
13662: # chokes on; and adds a lot of initialization for the tek dialog area.
13663: # Note that this entry uses all 34 lines and sets the cursor color to green.
13664: # Steve Jacobson 8/85
13665: # (tek4125: there were two "\!"s in the is that I replaced with "\E!";
13666: # commented out, <smir>=\E1 because there's no <rmir> -- esr)
13667: tek4125|tektronix 4125,
13668: lines#34,
13669: csr@, dl1=\E[1M, il1=\E[1L,
13670: is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h,
1.11 millert 13671: rc@, sc@, smkx=\E=,
13672: use=vt100,
1.1 millert 13673:
13674: # From: <jcoker@ucbic>
13675: # (tek4207: This was the termcap file's entry for the 4107/4207, but SCO
13676: # supplied another, less capable 4107 entry. So we'll use that for 4107 and
13677: # note that if jcoker wasn't confused you may be able to use this one.
13678: # I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr)
13679: tek4207|Tektronix 4207 graphics terminal with memory,
13680: am, bw, mir, msgr, ul, xenl,
13681: cols#80, it#8, lines#32,
1.11 millert 13682: blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>,
13683: cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13684: cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J,
13685: el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>,
13686: il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5,
1.1 millert 13687: is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J,
1.11 millert 13688: kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H,
13689: rev=\E[7m, ri=\E[T,
13690: rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m,
13691: rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m,
1.1 millert 13692: smul=\E[4m, tbc=\E[1g,
13693:
13694: # From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985
13695: # (tek4404: There was a "\!" in <smcup> that I replaced with "\E!".
13696: # Tab had been given as \E2I,that must be the tab-set capability -- esr)
13697: tek4404|tektronix 4404,
1.11 millert 13698: OTbs,
13699: cols#80, it#8, lines#32,
1.1 millert 13700: blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J,
13701: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
1.11 millert 13702: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M,
13703: ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L,
13704: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8,
13705: rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l,
13706: rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m,
13707: smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h,
13708: smkx=\E[?1l, smso=\E[7m, smul=\E[4m,
1.1 millert 13709: # Some unknown person wrote:
13710: # I added the is string - straight Unix has ESC ; in the login
13711: # string which sets a ct8500 into monitor mode (aka 4025 snoopy
13712: # mode). The is string here cleans up a few things (but not
13713: # everything).
1.11 millert 13714: ct8500|tektronix ct8500,
13715: am, bw, da, db,
13716: cols#80, lines#25,
13717: bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J,
13718: cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER,
13719: dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\,
13720: il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s,
13721: rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!,
1.1 millert 13722:
1.11 millert 13723: # Tektronix 4205 terminal.
1.1 millert 13724: #
1.11 millert 13725: # am is not defined because the wrap around occurs not when the char.
13726: # is placed in the 80'th column, but when we are attempting to type
13727: # the 81'st character on the line. (esr: hmm, this is like the vt100
13728: # version of xenl, perhaps am + xenl would work!)
1.1 millert 13729: #
1.11 millert 13730: # Bold, dim, and standout are simulated by colors and thus not allowed
13731: # with colors. The tektronix color table is mapped into the RGB color
13732: # table by setf/setb. All colors are reset to factory specifications by oc.
13733: # The <initc> cap uses RGB notation to define colors. for arguments 1-3 the
13734: # interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub-
13735: # interval then maps into pre-defined value.
13736: tek4205|tektronix 4205,
13737: ccc, mir, msgr,
13738: colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63,
13739: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
13740: bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z,
13741: clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D,
1.1 millert 13742: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
13743: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
1.11 millert 13744: dch1=\E[1P, dim=\E[=1;<6m, dl1=\E[1M, ech=\E%p1%dX,
13745: ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I,
13746: ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, ind=\ED,
13747: initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1,
13748: invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H,
13749: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA,
13750: kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER,
13751: kf7=\ES,
13752: oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1,
13753: op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=,
13754: rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m,
13755: setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
13756: setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;,
13757: sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N,
13758: smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m,
13759: smul=\E[4m, tbc=\E[1g,
1.1 millert 13760:
1.11 millert 13761: #### Teletype (tty)
1.1 millert 13762: #
1.11 millert 13763: # These are the hardcopy Teletypes from before AT&T bought the company,
13764: # clattering electromechanical dinosaurs in Bakelite cases that printed on
13765: # pulpy yellow roll paper. If you remember these you go back a ways.
13766: # Teletype-branded VDTs are listed in the AT&T section.
1.1 millert 13767: #
1.11 millert 13768: # The earliest UNIXes were designed to use these clunkers; nroff and a few
13769: # other programs still default to emitting codes for the Model 37.
1.1 millert 13770: #
13771:
1.11 millert 13772: tty33|tty35|model 33 or 35 teletype,
13773: hc, os, xon,
13774: cols#72,
13775: bel=^G, cr=^M, cud1=^J, ind=^J,
13776: tty37|model 37 teletype,
13777: OTbs, hc, os, xon,
13778: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
13779: ind=^J,
1.1 millert 13780:
1.11 millert 13781: # There are known to be at least three flavors of the tty40, all seem more
13782: # like IBM half duplex forms fillers than ASCII terminals. They have lots of
13783: # awful braindamage, such as printing a visible newline indicator after each
13784: # newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is
13785: # braindamaged but has hope and is described here. The 40-4 is a 3270
13786: # lookalike and beyond hope. The terminal has visible bell but I don't know
13787: # it - it's null here to prevent it from showing the BL character.
13788: # There is an \EG in <nl> because of a bug in old vi (if stty says you have
13789: # a "newline" style terminal (-crmode) vi figures all it needs is nl
13790: # to get crlf, even if <cr> is not ^M.)
13791: # (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr)
13792: tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2,
13793: OTbs, xon,
13794: cols#80, lines#24,
13795: clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB,
13796: cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>,
13797: ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1,
13798: ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^],
13799: kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4,
13800: rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>,
13801: tty43|model 43 teletype,
13802: OTbs, am, hc, os, xon,
13803: cols#132,
13804: bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
1.1 millert 13805:
1.11 millert 13806: #### Tymshare
1.1 millert 13807: #
13808:
1.11 millert 13809: # You can add <is2=\E<> to put this 40-column mode, though I can't
13810: # for the life of me think why anyone would want to.
13811: scanset|sc410|sc415|Tymshare Scan Set,
13812: am, bw, msgr,
13813: cols#80, lines#24,
13814: acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H,
13815: cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
13816: cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED,
13817: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0,
13818: mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N,
13819:
13820: #### Volker-Craig (vc)
1.1 millert 13821: #
1.11 millert 13822: # If you saw a Byte Magazine cover with a terminal on it during the early
13823: # 1980s, it was probably one of these. Carl Helmers liked them because
13824: # they could crank 19.2 and were cheap (that is, he liked them until he tried
13825: # to program one...)
1.1 millert 13826: #
13827:
1.11 millert 13828: # Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time
13829: # every other linefeed.
13830: vc303|vc103|vc203|volker-craig 303,
13831: OTbs, OTns, am,
13832: cols#80, lines#24,
13833: bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
13834: cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I,
13835: kcuu1=^N, ll=\017$<1>W,
13836: vc303a|vc403a|volker-craig 303a,
13837: clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>,
13838: home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303,
13839: # (vc404: removed obsolete ":ma=^Z^P^U :" -- esr)
13840: vc404|volker-craig 404,
13841: OTbs, am,
13842: cols#80, lines#24,
13843: bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13844: cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
13845: ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J,
13846: kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z,
13847: vc404-s|volker-craig 404 w/standout mode,
13848: cud1=^J, rmso=^O, smso=^N, use=vc404,
13849: # From: <wolfgang@cs.sfu.ca>
13850: # (vc414: merged in cup/dl1/home from an old vc414h-noxon)
13851: vc414|vc414h|Volker-Craig 414H in sane escape mode.,
13852: OTbs, am,
13853: cols#80, lines#24,
13854: clear=\E\034$<40>, cud1=\E^K, cuf1=^P,
13855: cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3,
13856: dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R,
13857: ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P,
13858: kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE,
13859: kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2,
13860: lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8,
13861: rmso=\E^_, smso=\E^Y,
13862: vc415|volker-craig 415,
13863: clear=^L, use=vc404,
13864:
13865: ######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS
1.1 millert 13866: #
13867:
1.11 millert 13868: #### IBM PC and clones
1.1 millert 13869: #
13870:
1.11 millert 13871: # The pcplot IBM-PC terminal emulation program is really messed up. It is
13872: # supposed to emulate a vt-100, but emulates the wraparound bug incorrectly,
13873: # doesn't support scrolling regions, ignores add line commands, and ignores
13874: # delete line commands. Consequently, the resulting behavior looks like a
13875: # crude adm3a-type terminal.
13876: # Steve Jacobson 8/85
13877: pcplot|pc-plot terminal emulation program,
13878: xenl@,
13879: csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100,
13880: # KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA>
13881: # I've found that my KayPro II, running MDM730, continues to emulate an
13882: # ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX
13883: # system the following termcap entry works well:
13884: # I have noticed a couple of minor glitches, but nothing I can't work
13885: # around. (I added two capabilities from the BRL entry -- esr)
13886: kaypro|kaypro2|kaypro II,
13887: OTbs, am,
13888: cols#80, lines#24,
13889: bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L,
13890: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W,
13891: el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K,
13892:
13893: # From IBM, Thu May 5 19:35:27 1983
1.14 millert 13894: # (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr)
1.11 millert 13895: ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS),
13896: OTbs, am,
1.1 millert 13897: cols#80, lines#24,
1.11 millert 13898: bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\,
13899: cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_,
13900:
13901: ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX,
13902: OTbs, am, bw, eo, hs, km, msgr, ul,
13903: cols#80, it#8, lines#24,
13904: acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263,
13905: bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M,
13906: cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
13907: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
13908: cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K,
13909: home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B,
13910: indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H,
13911: kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
13912: kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241,
13913: kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247,
13914: kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, ll=\E[24;1H,
13915: nel=^M, rev=\E[7m, ri=\E[T\E[A, rin=\E[%p1%dT\E[%p1%dA,
13916: rmso=\E[m, rmul=\E[m,
13917: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m,
13918: sgr0=\E[m, smso=\E[7m, smul=\E[4m,
1.1 millert 13919:
1.11 millert 13920: #### Apple II
13921: #
13922: # Apple II firmware console first, then various 80-column cards and
13923: # terminal emulators. For two cents I'd toss all these in the UFO file
13924: # along with the 40-column apple entries.
1.1 millert 13925: #
1.11 millert 13926:
13927: # From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL
13928: # 'it#8' tells UNIX that you have tabs every 8 columns. This is a
13929: # function of TIC, not the firmware.
13930: # The clear key on a IIgs will do something like clear-screen,
13931: # depending on what you're in.
13932: appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface,
13933: OTbs, am, bw, eo, msgr,
13934: cols#80, it#8, lines#24,
13935: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\,
13936: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
13937: home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J,
13938: kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N,
13939: smso=^O,
13940: # Apple //e with 80-column card, entry from BRL
13941: # The modem interface is permitted to discard LF (maybe DC1), otherwise
13942: # passing characters to the 80-column firmware via COUT (PR#3 assumed).
13943: # Auto-wrap does not work right due to newline scrolling delay, which also
13944: # requires that you set "stty cr2".
13945: # Note: Cursor addressing is only available via the Pascal V1.1 entry,
13946: # not via the BASIC PR#3 hook. All this nonsense can be avoided only by
13947: # using a terminal emulation program instead of the built-in firmware.
13948: apple2e|Apple //e,
13949: bw, msgr,
13950: cols#80, lines#24,
13951: bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_,
13952: ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W,
13953: is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K,
13954: nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
13955: smso=^O,
13956: # mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro
13957: # 4.20, with incoming and outgoing terminals both on 0, emulation On.
13958: apple2e-p|Apple //e via Pascal,
13959: cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H,
13960: kcud1=^J,
13961: use=apple2e,
13962: # (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL
13963: # Enable DC3/DC1 flow control with "stty ixon -ixany".
13964: apple-ae|ASCII Express,
13965: OTbs, am, bw, msgr, nxon, xon,
13966: cols#80, it#8, lines#24,
13967: bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
13968: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
13969: home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J,
13970: kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N,
13971: smso=^O,
13972: appleII|apple ii plus,
13973: OTbs, am,
13974: cols#80, it#8, lines#24,
13975: clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\,
13976: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6,
13977: ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I,
13978: is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N,
13979: smso=^O,
13980: # Originally by Gary Ford 21NOV83
13981: # From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985
13982: apple-80|apple II with smarterm 80 col,
13983: OTbs, am, bw,
13984: cols#80, lines#24,
13985: cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J,
13986: cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_,
13987: ed=\013$<10*/>, el=\035$<10/>, home=^Y,
13988: apple-soroc|apple emulating soroc 120,
13989: am,
13990: cols#80, lines#24,
13991: bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
13992: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET,
13993: home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
13994: # From Peter Harrison, Computer Graphics Lab, San Francisco
13995: # ucbvax!ucsfmis!harrison .....uucp
13996: # ucbvax!ucsfmis!harrison@BERKELEY .......ARPA
13997: # "These two work. If you don't have the inverse video chip for the
13998: # Apple with videx then remove the :so: and :se: fields."
13999: # (apple-videx: this used to be called DaleApple -- esr)
14000: apple-videx|Apple with videx videoterm 80 column board with inverse video,
14001: OTbs, am, xenl,
14002: cols#80, it#8, lines#24,
14003: clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\,
14004: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14005: home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y,
14006: rmso=^Z2, sgr0=^Z2, smso=^Z3,
14007: # My system [for reference] : Apple ][+, 64K, Ultraterm display card,
14008: # Apple Cat ][ 212 modem, + more all
14009: # controlled by ASCII Express: Pro.
14010: # From Dave Shaver <isucs1!shaver>
14011: apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell,
14012: OTbs, am, eo, xt,
14013: cols#80, lines#24,
14014: acsc=, clear=^L, cuf1=^\,
14015: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14016: flash=^W35^W06, home=^Y,
14017: is2=^V4^W06\017\rVisible Bell Installed.\016\r\n,
14018: rmso=^N, smso=^O,
14019: apple-uterm|Ultraterm for Apple micros,
14020: OTbs, am, eo, xt,
14021: cols#80, lines#24,
14022: acsc=, clear=^L, cuf1=^\,
14023: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14024: home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O,
14025: # from trwrba!bwong (Bradley W. Wong):
1.1 millert 14026: #
1.11 millert 14027: # This entry assumes that you are using an apple with the UCSD Pascal
14028: # language card. SYSTEM.MISCINFO is assumed to be the same as that
14029: # supplied with the standard apple except that screenwidth should be set
14030: # using SETUP to 80 columns. Note that the right arrow in not mapped in
14031: # this termcap entry. This is because that key, on the Apple, transmits
14032: # a ^U and would thus preempt the more useful "up" function of vi.
1.1 millert 14033: #
1.11 millert 14034: # HMH 2/23/81
14035: apple80p|80-column apple with Pascal card,
14036: am, bw,
14037: cols#80, lines#24,
14038: clear=^Y^L, cuf1=^\\:,
14039: cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^],
14040: home=^Y, kcub1=^H,
1.1 millert 14041: #
1.11 millert 14042: # Apple II+ equipped with Videx 80 column card
1.1 millert 14043: #
1.11 millert 14044: # Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL;
14045: # manually converted by D A Gwyn
1.1 millert 14046: #
1.11 millert 14047: # DO NOT use any terminal emulation with this data base, it works directly
14048: # with the Videx card. This has been tested with vi 1200 baud and works fine.
1.1 millert 14049: #
1.11 millert 14050: # This works great for vi, except I've noticed in pre-R2, ^U will scroll back
14051: # 1 screen, while in R2 ^U doesn't.
14052: # For inverse alternate character set add:
14053: # <smacs>=^O:<rmacs>=^N:
14054: # (apple-v: added it#8 -- esr)
14055: apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520),
14056: am, xenl,
14057: cols#80, it#8, lines#24,
14058: bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H,
14059: cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c,
14060: cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>,
14061: ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_,
14062: khome=^Y, rmso=^Z2, smso=^Z3,
14063: apple-videx3|vapple|Apple II with 80 col card,
14064: OTbs, am,
14065: cols#80, lines#24,
14066: clear=\Ev, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
14067: cuu1=\EA, el=\Ex, home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
14068: kcuu1=\EA, kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!,
14069: kf5=\E", kf6=\E#, kf7=\E$, kf8=\E%, kf9=\E&, khome=\EH,
14070: #From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL
14071: aepro|Apple II+ running ASCII Express Pro--vt52,
14072: OTbs,
14073: cols#80, lines#24,
14074: clear=\014$<300/>, cuf1=\EC,
14075: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
14076: el=\EK, home=\EH,
14077: # UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory
14078: apple-vm80|ap-vm80|apple with viewmax-80,
14079: OTbs,
14080: cols#80, lines#24,
14081: clear=\014$<300/>, cuf1=^\\:,
14082: cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_,
14083: ed=\013$<300/>, el=^], home=\031$<200/>,
1.1 millert 14084:
1.11 millert 14085: #### Apple Lisa & Macintosh
14086: #
1.1 millert 14087:
1.11 millert 14088: # (lisa: changed <cvvis> to <cnorm> -- esr)
14089: lisa|apple lisa console display (black on white),
14090: OTbs, am, eo, msgr,
14091: cols#88, it#8, lines#32,
14092: acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L,
14093: cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C,
14094: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
14095: ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L,
14096: is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B,
14097: kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m,
14098: sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m,
14099: liswb|apple lisa console display (white on black),
14100: is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m,
14101: smso=\E[m, smul=\E[4m, use=lisa,
1.1 millert 14102:
1.11 millert 14103: # lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL;
14104: # <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA>
14105: #
14106: # These entries assume that the 'Auto Wraparound' is enabled.
14107: # Xon-Xoff flow control should also be enabled.
1.1 millert 14108: #
1.11 millert 14109: # The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab
14110: # settings are in non-volatile memory and don't need to be reset upon login.
14111: # Also setting the number of columns glitches the screen annoyingly.
14112: # You can type "reset" to get them set.
1.1 millert 14113: #
1.11 millert 14114: lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation,
14115: OTbs, OTpt, am, xenl, xon,
14116: OTkn#4, cols#80, it#8, lines#24, vt#3,
14117: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
14118: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
14119: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
14120: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
14121: el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD,
14122: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ,
14123: kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8,
14124: rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
14125: rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r,
14126: sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m,
14127: tbc=\E[3g,
14128: # Lisaterm in 132 column ("wide") mode.
14129: lisaterm-w|Apple Lisa with Lisaterm in 132 column mode,
14130: cols#132,
14131: kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm,
14132: # Although MacTerminal has insert/delete line, it is commented out here
14133: # since it is much faster and cleaner to use the "lock scrolling region"
14134: # method of inserting and deleting lines due to the MacTerminal implementation.
14135: # Also, the "Insert/delete ch" strings have an extra character appended to them
14136: # due to a bug in MacTerminal V1.1. Blink is disabled since it is not
14137: # supported by MacTerminal.
14138: mac|macintosh|Macintosh with MacTerminal,
14139: xenl,
14140: OTdN#30,
14141: blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa,
14142: # Lisaterm in 132 column ("wide") mode.
14143: mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode,
14144: cols#132, use=mac,
1.1 millert 14145:
1.11 millert 14146: #### Radio Shack/Tandy
1.1 millert 14147: #
14148:
1.11 millert 14149: # (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7".
14150: # I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr)
14151: # From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90
14152: coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II,
14153: OTbs, am,
14154: cols#80, it#8, lines#24,
14155: bel=^G, blink=^_", bold=\E\:^A, civis=^E\s,
14156: clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F,
14157: cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I,
14158: dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J,
14159: kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#,
14160: sgr0=\037!\E\:\0, smso=^_\s, smul=^_",
14161: # (trs2: removed obsolete ":nl=^_:" -- esr)
14162: trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M,
14163: OTbs, am, msgr,
14164: cols#80, it#8, lines#24,
14165: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^],
14166: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B,
14167: el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\,
14168: kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N,
14169: # From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu>
14170: # (This had extension capabilities
14171: # :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\
14172: # :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@:
14173: # I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr)
14174: trs16|trs-80 model 16 console,
14175: OTbs, am,
14176: cols#80, it#8, lines#24,
14177: acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L,
14178: cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
14179: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
14180: dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
14181: ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
14182: kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S,
14183: khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7,
14184: lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@,
14185: smacs=\ERG, smso=\ERD,
1.1 millert 14186:
1.11 millert 14187: #### Atari ST
1.1 millert 14188: #
14189:
1.11 millert 14190: # From: Simson L. Garfinkel <simsong@media-lab.mit.edu>
14191: atari|atari st,
14192: OTbs, am,
14193: cols#80, it#8, lines#25,
14194: clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC,
14195: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
14196: ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB,
14197: kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep,
14198: # UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode
14199: # From: Paul M. Aoki <aoki@ucbvax.berkeley.edu>
14200: uniterm|uniterm49|UniTerm VT220 emulator with 49 lines,
14201: lines#49,
14202: is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, use=vt220,
14203: # MiNT VT52 emulation. 80 columns, 25 rows.
14204: # MiNT is Now TOS, the operating system which comes with all Ataris now
14205: # (mainly Atari Falcon). This termcap is for the VT52 emulation you get
14206: # under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode
14207: # From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996
14208: st52|Atari ST with VT52 emulation,
14209: am, km,
1.1 millert 14210: cols#80, lines#25,
1.11 millert 14211: bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED,
14212: cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
14213: cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL,
14214: ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1,
14215: kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M,
14216: kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>,
14217: kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G,
14218: kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek,
14219: ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq,
14220: smcup=\Ee, smso=\Ep,
14221:
14222: #### Commodore Business Machines
1.1 millert 14223: #
1.11 millert 14224: # Formerly located in West Chester, PA; went spectacularly bust in 1994
14225: # after years of shaky engineering and egregious mismanagement. Made one
14226: # really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64,
14227: # C-128, VIC-20). The C-64 is said to have been the most popular machine
14228: # ever (most units sold); they can still be found gathering dust in closets
14229: # everywhere.
1.1 millert 14230: #
14231:
1.11 millert 14232: # From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90
14233: # Added a few more entries, converted caret-type control sequence (^x) entries
14234: # to '\0xx' entries since a couple of people mentioned losing '^x' sequences.
1.14 millert 14235: # Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998
1.11 millert 14236: #
14237: # :as:, :ae: Support for alternate character sets.
14238: # :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible.
14239: # :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept)
14240: # This one appears to fix a problem I always had with a line ending
14241: # at 'width+1' (I think) followed by a blank line in vi. The blank
14242: # line tended to disappear and reappear depending on how the screen
14243: # was refreshed. Note that this is probably needed only if you use
14244: # something like a Dnet Fterm with the window sized to some peculiar
14245: # dimension larger than 80 columns.
14246: # :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;'
14247: # (amiga: removed obsolete :kn#10:,
14248: # also added empty <acsc> to suppress a warning --esr)
14249: amiga|Amiga ANSI,
14250: OTbs, am, bw, xenl,
14251: cols#80, lines#24,
14252: acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z,
14253: civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD,
14254: cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC,
14255: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
14256: cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m,
14257: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H,
14258: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S,
1.14 millert 14259: indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H,
14260: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~,
14261: kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~,
14262: kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m,
14263: ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m,
14264: rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m,
1.1 millert 14265:
1.11 millert 14266: # From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995
14267: # (amiga: added empty <acsc> to suppress a warning.
14268: # I'm told this entry screws up badly with AS225, the Amiga
14269: # TCP/IP package once from Commodore, and now sold by InterWorks.--esr)
14270: amiga-h|Hans Verkuil's Amiga ANSI,
14271: OTbs, bw, msgr,
14272: cols#80, lines#24,
14273: acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z,
14274: civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M,
14275: cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B,
14276: cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH,
14277: cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P,
14278: dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G,
14279: home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S,
14280: indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H,
14281: kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
14282: kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~,
14283: kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~,
14284: kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T,
14285: rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m,
14286: rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l,
14287: smso=\2337m, smul=\2334m,
14288:
14289: # From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999
14290: amiga-8bit|Amiga ANSI using 8-bit controls,
14291: acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L,
14292: ind=\204, indn@, ri=\215, rin@,
14293: use=amiga-h,
1.1 millert 14294:
1.11 millert 14295: # Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA>
14296: # I'm trying to write a termcap for a commodore b-128, and I'm
14297: # having a little trouble. I've had to map most of my control characters
14298: # to something that unix will accept (my delete-char is a ctrl-t, etc),
14299: # and create some functions (like cm), but thats life.
14300: # The problem is with the arrow keys - right, and up work fine, but
14301: # left deletes the previous character and down I just can't figure out.
14302: # Jove knows what I want, but I don't know what it's sending to me (it
14303: # isn't thats bound to next-line in jove).
14304: # Anybody got any ideas? Here's my termcap.
14305: # DAG -- I changed his "^n" entries to "\n"; see if that works.
1.1 millert 14306: #
1.11 millert 14307: commodore|b-128|Commodore B-128 micro,
14308: am, bw,
14309: OTdN#20, cols#80, lines#24, pb#150,
14310: OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J,
14311: cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P,
14312: dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>,
14313: home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>,
14314: kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=,
14315: smir=,
1.1 millert 14316:
1.11 millert 14317: #### North Star
1.1 millert 14318: #
1.11 millert 14319: # North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL
14320: northstar|North Star Advantage,
14321: OTbs,
14322: cols#80, lines#24,
14323: clear=\004$<200/>,
14324: cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>,
14325: el=\016$<200/>, home=\034\032$<200/>,
1.1 millert 14326:
1.11 millert 14327: #### Osborne
1.1 millert 14328: #
1.11 millert 14329: # Thu Jul 7 03:55:16 1983
14330: #
14331: # As an aside, be careful; it may sound like an anomaly on the
14332: # Osborne, but with the 80-column upgrade, it's too easy to
14333: # enter lines >80 columns!
14334: #
14335: # I've already had several comments...
14336: # The Osborne-1 with the 80-col option is capable of being
14337: # 52, 80, or 104 characters wide; default to 80 for compatibility
14338: # with most systems.
14339: #
14340: # The tab is destructive on the Ozzie; make sure to 'stty -tabs'.
14341: osborne-w|osborne1-w|osborne I in 104-column mode,
14342: msgr, ul, xt,
14343: cols#104, lines#24,
14344: bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14345: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14346: dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J,
14347: kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El,
14348: # Osborne I from ptsfa!rhc (Robert Cohen) via BRL
14349: osborne|osborne1|osborne I in 80-column mode,
14350: OTbs, am, mir, msgr, ul, xhp,
14351: OTdB#4, cols#80, lines#24,
14352: clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L,
14353: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K,
14354: dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H,
14355: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E),
14356: rmul=\Em, smir=\EQ, smso=\E(, smul=\El,
1.1 millert 14357: #
1.11 millert 14358: # Osborne Executive definition from BRL
14359: # Similar to tvi920
14360: # Added by David Milligan and Tom Smith (SMU)
14361: osexec|Osborne executive,
14362: OTbs, am,
14363: OTug#1, cols#80, lines#24, xmc#1,
14364: OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14365: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
14366: dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE,
14367: is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L,
14368: kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r,
14369: kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r,
14370: kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej,
14371: smul=\El, tbc=\E3,
1.1 millert 14372:
1.11 millert 14373: #### Console types for obsolete UNIX clones
1.1 millert 14374: #
1.11 millert 14375: # Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088
14376: # machines that tried to emulate the UNIX look'n'feel. Coherent and Venix
14377: # were commercial, Minix an educational tool sold in conjunction with a book.
14378: # Memory-segmentation limits and a strong tendency to look like V7 long after
14379: # it was obsolete made all three pretty lame. Venix croaked early. Coherent
14380: # and Minix were ported to 32-bit Intel boxes, only to be run over by a
14381: # steamroller named `Linux' (which, to be fair, traces some lineage to Minix).
14382: # Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There
14383: # are also, I'm told, Minix ports that ran on Amiga and Atari machines and
14384: # even as single processes under SunOS and the Macintosh OS.
1.1 millert 14385: #
14386:
1.11 millert 14387: # This is the entry provided with minix 1.7.4, with bogus :ri: removed.
14388: minix|minix console (v1.7),
14389: am, xenl,
14390: cols#80, it#8, lines#25,
14391: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
14392: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14393: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14394: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14395: dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
14396: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
14397: is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14398: kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S,
14399: kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, lf2=PgDn, lf3=Num +,
14400: lf4=Num -, lf5=Num 5, nel=^M^J, rev=\E[7m, ri=\EM,
14401: rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
14402: # Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil>
14403: minix-old|minix console (v1.5),
14404: xon,
14405: cols#80, it#8, lines#25,
14406: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M,
14407: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
14408: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14409: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14410: dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I,
14411: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
14412: kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A,
14413: kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G,
14414: khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m,
14415: rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m,
14416: # The linewrap option can be specified by editing /usr/include/minix/config.h
14417: # before recompiling the minix 1.5 kernel.
14418: minix-old-am|minix console with linewrap,
14419: am, use=minix-old,
1.1 millert 14420:
1.11 millert 14421: pc-minix|minix console on an Intel box,
14422: use=klone+acs, use=minix,
1.1 millert 14423:
1.11 millert 14424: # According to the Coherent 2.3 manual, the PC console is similar
14425: # to a z19. The differences seem to be (1) 25 lines, (2) no status
14426: # line, (3) standout is broken, (4) ins/del line is broken, (5)
14427: # has blinking and bold.
14428: pc-coherent|pcz19|coherent|IBM PC console running Coherent,
14429: am, mir,
14430: cols#80, it#8, lines#25,
14431: bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
14432: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN,
14433: ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED,
14434: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO,
14435: rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep,
1.1 millert 14436:
1.11 millert 14437: # According to the Venix 1.1 manual, the PC console is similar
14438: # to a DEC vt52. Differences seem to be (1) arrow keys send
14439: # different strings, (2) enhanced standout, (3) added insert/delete line.
14440: # Note in particular that it doesn't have automatic margins.
14441: # There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they
14442: # not described here because this derives from an old termcap entry.
14443: pc-venix|venix|IBM PC console running Venix,
14444: cols#80, it#8, lines#25,
14445: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
1.1 millert 14446: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
1.11 millert 14447: ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK,
14448: kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI,
1.1 millert 14449:
1.11 millert 14450: #### Miscellaneous microcomputer consoles
1.1 millert 14451: #
1.11 millert 14452: # If you know anything more about any of these, please tell me.
1.1 millert 14453: #
14454:
1.11 millert 14455: # The MAI Basic Four computer was obsolete at the end of the 1980s.
14456: # It may be used as a terminal by putting it in "line" mode as seen on
14457: # one of the status lines.
14458: # Initialization is similar to CIT80. <is2> will set ANSI mode for you.
14459: # Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so
14460: # wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I
14461: # used \ED instead.
14462: # From: bf347@lafn.org (David Lawyer), 28 Jun 1997
14463: mai|basic4|MAI Basic Four in ansi mode,
14464: am, da, db, mir, msgr,
14465: cols#82, it#8, lines#25,
14466: bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h,
14467: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X,
14468: cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P,
14469: dl1=\E[M, ed=^_, el=^^, home=^], ht=^I,
14470: if=/usr/lib/tabset/vt100, il1=\E[L, ind=\ED,
14471: is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H,
14472: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
14473: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU,
14474: kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T,
14475: rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m,
14476: smir=\E[4h, smso=\E[7m, smul=\E[4m,
14477: # basis from Peter Harrison, Computer Graphics Lab, San Francisco
14478: # ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA
1.14 millert 14479: #
14480: # On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote:
14481: # The Basis 108 was a Apple II clone, manufactured by the "Basis
14482: # Mikrocomputer GmbH" in Munster, Germany (the company still exists today,
14483: # about 1,5 km from where I live, but doesn't build own computers any
14484: # more). A Basis 108 featured a really heavy (cast aluminium?) case, was
14485: # equipped with one or two 5.25" disk drives, had a monochrome and colour
14486: # video output for a TV set or a dedicated monitor and several slots for
14487: # Apple II cards. Basis 108 were quite popular at german schools before
14488: # the advent of the IBM PC. They run, for example, the UCSD Pascal
14489: # development system (which I used even in 1993 to program the steering
14490: # and data recording for our school's experimental solar panel :), Apple DOS
14491: # or CP/M.
1.11 millert 14492: # (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr)
14493: basis|BASIS108 computer with terminal translation table active,
14494: clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H,
14495: kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E),
14496: smso=\E(,
14497: use=adm3a,
14498: # luna's BMC terminal emulator
14499: luna|luna68k|LUNA68K Bitmap console,
14500: cols#88, lines#46, use=ansi-mini,
14501: megatek|pegasus workstation terminal emulator,
14502: am, os,
14503: cols#83, lines#60,
14504: # The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived
14505: # interface (pre-Macintosh by several years) that went nowhere.
14506: xerox820|x820|Xerox 820,
14507: am,
14508: cols#80, lines#24,
14509: bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
14510: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X,
14511: home=^^, ind=^J,
1.1 millert 14512:
1.11 millert 14513: #### Videotex and teletext
1.1 millert 14514: #
1.11 millert 14515:
14516: # \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429)
14517: # \E[?3l 80 columns
14518: # \E[?4l scrolling on
14519: # \E[12h local echo off
14520: # \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen
14521: # \E)0 G1 DEC set (line graphics)
1.1 millert 14522: #
1.11 millert 14523: # From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997
14524: m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique,
14525: OTbs, eslok, hs, xenl,
14526: cols#80, it#8, lines#24, wsl#72, xmc#0,
14527: acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G,
14528: blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J,
14529: cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr,
14530: cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B,
14531: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
14532: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14533: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J,
14534: home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=^J,
14535: ip=$<7/>, is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0,
14536: is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B,
14537: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp,
14538: kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu,
14539: kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H,
14540: kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H,
14541: mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rin=\EM,
14542: rmacs=^O, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m,
14543: rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m,
14544: smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A,
14545: u6=\E[%i%d;%dR, u7=\E[6n,
1.1 millert 14546:
1.11 millert 14547: # From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998
14548: #
14549: minitel1|minitel 1,
14550: am, bw, eslok, hs, hz, msgr,
14551: colors#8, cols#40, lines#24, pairs#8,
14552: acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L,
14553: cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
14554: cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X,
14555: enacs=^Y, fsl=^J, home=^^, ind=^J,
14556: is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG,
14557: rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\,
14558: setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;,
14559: sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;,
14560: sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c,
14561: # is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON.
14562: minitel1b|minitel 1-bistandard (in 40cols mode),
14563: mir,
14564: cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC,
14565: cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14566: dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L,
14567: is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D,
14568: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
14569: kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l,
14570: smir=\E[4h, smkx=\E;iYA\E;jYC,
14571: use=minitel1,
14572: # <rmkx> posait des problemes (logout en sortant de vi).
14573: minitel1b-80|minitel 1-bistandard (standard teleinformatique),
14574: am@, bw@, hz@,
14575: colors@, cols#80, it#8, pairs@,
14576: blink=\E[5m, bold=\E[1m, civis=\037@A\024\n,
14577: clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C,
14578: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
14579: ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq,
14580: kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw,
14581: kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m,
14582: ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@,
14583: sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m,
14584: sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m,
14585: use=minitel1b,
1.1 millert 14586:
1.11 millert 14587: ######## OBSOLETE VDT TYPES
1.1 millert 14588: #
1.11 millert 14589: # These terminals are *long* dead -- these entries are retained for
14590: # historical interest only.
14591:
14592: #### Amtek Business Machines
1.1 millert 14593: #
14594:
1.11 millert 14595: # (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y",
14596: # but these caps were commented out in 8.3; also, removed overridden
14597: # ":do=^J:" -- esr)
14598: abm80|amtek business machines 80,
14599: OTbs, am, bw,
14600: cols#80, lines#24,
14601: cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P,
14602: cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L,
14603: dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z,
1.1 millert 14604:
1.11 millert 14605: #### Bell Labs blit terminals
14606: #
14607: # These were AT&T's official entries. The 5620 FAQ maintained by
14608: # David Breneman <daveb@dgtl.com> has this to say:
1.1 millert 14609: #
1.11 millert 14610: # Actually, in the beginning was the Jerq, and the Jerq was white with a
14611: # green face, and Locanthi and Pike looked upon the Jerq and said the Jerq
14612: # was good. But lo, upon the horizon loomed a mighty management-type person
14613: # (known now only by the initials VP) who said, the mighty Jerq must stay
14614: # alone, and could not go forth into the world. So Locanthi and Pike put the
14615: # Jerq to sleep, cloned its parts, and the Blit was brought forth unto the
14616: # world. And the Jerq lived the rest of its days in research, but never
14617: # strayed from those paths.
1.1 millert 14618: #
1.11 millert 14619: # In all seriousness, the Blit was originally known as the Jerq, but when
14620: # it started to be shown outside of the halls of the Bell Labs Research
14621: # organization, the management powers that be decided that the name could
14622: # not remain. So it was renamed to be Blit. This was in late 1981.
1.1 millert 14623: #
1.11 millert 14624: # (The AT&T 5620 was the commercialized Blit. Its successors were the 630,
14625: # 730, and 730+.)
1.1 millert 14626: #
1.11 millert 14627:
14628: blit|jerq|blit running teletype rom,
14629: am, eo, ul, xon,
14630: cols#87, it#8, lines#72,
14631: bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
14632: cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA,
14633: dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c,
14634: dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!,
14635: il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED,
14636: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez,
14637:
14638: # (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr)
14639: cbblit|fixterm|blit running columbus code,
14640: cols#88,
14641: ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d,
14642: rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!,
14643: smul=\EU",
14644: use=blit,
14645:
14646: oblit|ojerq|first version of blit rom,
14647: am, da, db, eo, mir, ul, xon,
14648: cols#88, it#8, lines#72,
14649: bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC,
14650: cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO,
14651: dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G,
14652: ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER,
14653: smir=\EQ,
14654:
14655: #### Bolt, Beranek & Newman (bbn)
1.1 millert 14656: #
1.11 millert 14657: # The BitGraph was a product of the now-defunct BBN Computer Corporation.
14658: # The parent company, best known as the architects of the Internet, is
14659: # still around.
1.1 millert 14660: #
1.11 millert 14661: # Jeff DelPapa <dp@world.std.com> writes:
14662: # The bitgraph was a large white box that contained a monochrome bitmap
14663: # display, and a 68000 to run it. You could download code and run it on
14664: # the cpu, it had 128kb (I think) of memory. I used one in the late
14665: # 70's, sure beat a vt100. It had one strange feature tho -- it used
14666: # the cpu to bitblt pixels to scroll, it took longer than the refresh
14667: # rate, and looked like a rubber sheet stretching, then snapping
14668: # upwards. It had everything the early mac had, except a floppy drive a
14669: # small screen (it had a 17" crisp beauty) and a real OS. They (Bolt
14670: # Beranek and Neuman) sold at most a few hundred of them to the real
14671: # world. DOD may have bought more...
14672: #
1.1 millert 14673:
1.11 millert 14674: # Entries for the BitGraph terminals. The problem
14675: # with scrolling in vi can only be fixed by getting BBN to put
14676: # smarter scroll logic in the terminal or changing vi or padding
14677: # scrolls with about 500 ms delay.
14678: #
14679: # I always thought the problem was related to the terminal
14680: # counting newlines in its input buffer before scrolling and
14681: # then moving the screen that much. Then vi comes along and
14682: # paints lines in on the bottom line of the screen, so you get
14683: # this big white gap.
14684:
14685: bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video),
14686: flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h,
14687: use=bg2.0,
14688: bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video),
14689: flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h,
14690: use=bg2.0,
14691: bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init),
14692: OTbs, xenl,
14693: cols#85, lines#64,
14694: bel=^G, clear=\E[H\E[J$<150>, cr=^M,
14695: csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C,
14696: cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>,
14697: ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>,
14698: ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C,
14699: kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1,
14700: lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7,
14701: sgr0=\E[m, smkx=\E=, smso=\E[7m,
14702:
14703: bg1.25rv|bbn bitgraph 1.25 (reverse video),
14704: flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, use=bg1.25,
14705: bg1.25nv|bbn bitgraph 1.25 (normal video),
14706: flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, use=bg1.25,
14707: # (bg1.25: I added <rmam>/<smam> based on the init string -- esr)
14708: bg1.25|bbn bitgraph 1.25,
14709: cols#85, lines#64,
14710: bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B,
14711: cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A,
14712: dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I,
14713: il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB,
14714: kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES,
14715: lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l,
14716: rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=,
14717: smso=\E[7m,
14718:
1.14 millert 14719: #### Bull (bq, dku, vip)
14720: #
14721: # (Adapted for terminfo; AIX extension capabilities translated -- esr)
14722:
14723: #============================================#
14724: # BULL QUESTAR 210 `SDP' terminals emulation #
14725: #============================================#
14726: #
14727: # Description written by R.K.Saunders (Bull Transac)
14728: #
14729: # Modifications written by F. Girard (Bull MTS)
14730: # 19-05-87 V02.00.01
14731: # 17-12-87 V02.00.02
14732: # 15-09-89 V02.00.05
14733: #
14734: # Typical technical selections F1 (modes SDP/ROLL):
14735: # -------------------------------------------------------
14736: # | 01 02 03 04 05 06 07 08 09 10 |
14737: # | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 |
14738: # | |
14739: # | 11 12 13 14 15 16 17 18 19 20 |
14740: # | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 |
14741: # | |
14742: # | 21 22 23 24 25 26 27 28 29 30 |
14743: # | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 |
14744: # | |
14745: # | 31 32 33 34 35 36 37 38 39 40 |
14746: # | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 |
14747: # -------------------------------------------------------
14748: # Typical firmware identification F5 "etat 6":
14749: # P287.02.04b (AZERTY)
14750: # P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764)
14751: # P298.03.03 (monochrome) or P374.03.02 (colour)
14752: #
14753: # SM SDP mode (VIP command): ^[[?=h
14754: # RIS (erases screen): ^[c
14755: # DMI disable keyboard: ^[`
14756: # SM double rendition mode: ^[[?>h
14757: # RM solicited status mode: ^[[5l
14758: # RM character mode: ^[[>l
14759: # RM echoplex mode: ^[[12l
14760: # RM column tab mode: ^[[18l
14761: # RM forbid SS2 keyboard mode: ^[[?<l
14762: # SM scroll mode: ^[[=h
14763: # FCF enable XON/XOFF: ^[P1s^[\
14764: # MTL select end msg character: ^[[^Wp
14765: # EMI enable keyboard: ^[b
14766: # RIS retour etat initial: ^[c
14767: # enable FC keypad: ^[[?<h,
14768: # MPW map status line window: ^[PY99:98^[\
14769: # SCP select status line: ^[[0;98v
14770: # ED erase entire partition: ^[[2J
14771: # SCP select main partition: ^[[v
14772: # SM character insertion mode: ^[[4h
14773: # RM character replacement mode: ^[[4l
14774: # COO cursor on: ^[[r
14775: # COO cursor off: ^[[1r
14776: # SGR dim (turquoise) rev attr: ^[[2;7m
14777: # SGR Data normal attr: ^[[m
14778: # SO Line-graphic mode ON: ^N
14779: # SI Line-graphic mode OFF: ^O
14780: # MC start routing to printer: ^[[5i
14781: # MC stop routing to printer: ^M^[[4i
14782: #
14783:
14784: # This entry covers the following terminals:
14785: # dku7102, tws2102, and tws models 2105 to 2112
14786: tws-generic|dku7102|Bull Questar tws terminals,
14787: am, eslok, hs, mir, msgr, xenl, xhp@, xon,
14788: cols#80, it#8, lines#24, wsl#80,
14789: acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~,
14790: bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J,
14791: cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB,
14792: cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df,
14793: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
14794: dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M,
14795: dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K,
14796: fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL,
14797: il1=\E[L, ind=^J, invis=\E[0;8m,
14798: is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\,
14799: is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p,
14800: is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D,
14801: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M,
14802: ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027,
14803: kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027,
14804: kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H,
14805: khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i,
14806: mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O,
14807: rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m,
14808: rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N,
14809: sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;,
14810: sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\,
14811: smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[2g,
14812: tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m,
14813: tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA,
14814: dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v,
14815: use=tws-generic,
14816: tws2103|xdku|BULL Questar tws2103,
14817: ht=^I, use=tws-generic,
14818: tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA,
14819: ht=^I,
14820: use=tws2102-sna,
14821: dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6),
14822: clear=\E[2J\E[H, cup@, dl@, dl1@,
14823: dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m,
14824: il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m,
14825: use=tws-generic,
14826: dku7202|BULL Questar 200 DKU7202 (colour/character attributes),
14827: blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb,
14828: smso=\E[0;4;5;7m, smul=\E[0;2m,
14829: use=tws-generic,
14830:
14831: #=========================================================#
14832: # BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation #
14833: #=========================================================#
14834: #
14835: # Description written by J. Staerck (BULL SA)
14836: # Copyright (c) 1989 BULL SA
14837: #---------------------------------------------------------------------------
14838: # This entry is used for terminals with vt320 emulation mode
14839: # and following set-up :
14840: # 8 bit ISO Latin Character Set (ISO 8859-1),
14841: # 7 bit Control Characters,
14842: # 80 columns screen.
14843: # Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300)
14844: # They are used in string capabilities with vt220-320 emulation mode.
14845: # In the following DEC definitions, two kinds of terminfo databases are
14846: # provided :
14847: # 1. the first with Command Sequence Introducer starting with escape
14848: # sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode.
14849: # 2. the second with Command Sequence Introducer starting with escape
14850: # sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B.
14851: # Soft Terminal Reset esc [ ! p
14852: # RIS (erases screen): esc c
14853: # DECKPNM numeric keypad mode: esc >
14854: # DECKPAM applic. keypad mode: esc =
14855: # DECSTBM Scrolling region: esc [ r
14856: # SCS select G0 = US: esc ( B
14857: # SCS select G1 = line-graphic: esc ) 0
14858: # Select 7-bit C1 controls: esc sp F
14859: # Select 8-bit C1 controls: esc sp G
14860: # Select cursor home: esc [ H
14861: # Select erase screen: esc [ J
14862: # SM KAM lock keyboard: esc [ 2 h
14863: # RM KAM unlock keyboard: esc [ 2 l
14864: # SM SRM local echo off: esc [ 1 2 h
14865: # RM SRM local echo on: esc [ 1 2 l
14866: # SM LNM New line : esc [ 2 0 h
14867: # RM LNM return = CR only: esc [ 2 0 l
14868: # SM DECCKM cursor keys mode: esc [ ? 1 h
14869: # RM DECCKM appli. keys mode: esc [ ? 1 l
14870: # SM DECANM ANSI mode on: esc [ ? 2 h
14871: # RM DECANM ANSI mode off: esc [ ? 2 l
14872: # SM DECCOLM 132-column screen: esc [ ? 3 h
14873: # RM DECCOLM 80-column screen: esc [ ? 3 l
14874: # SM DECSCLM Smooth scroll: esc [ ? 4 h
14875: # RM DECSCLM Jump scroll: esc [ ? 4 l
14876: # SM DECSCNM screen light backgr. esc [ ? 5 h
14877: # RM DECSCNM screen dark backgr. esc [ ? 5 l
14878: # SM DECOM move within margins: esc [ ? 6 h
14879: # RM DECOM move outside margins: esc [ ? 6 l
14880: # SM DECAWM auto right margin: esc [ ? 7 h
14881: # RM DECAWM auto right margin: esc [ ? 7 l
14882: # SM DECARM auto repeat: esc [ ? 8 h
14883: # RM DECARM auto repeat: esc [ ? 8 l
14884: # DECSASD Select active main: esc [ 0 $ }
14885: # DECSASD Select active status: esc [ 1 $ }
14886: # DECSSDT Select status none: esc [ 0 $ ~
14887: # DECSSDT Select status indic.: esc [ 1 $ ~
14888: # DECSSDT Select status host-wr: esc [ 2 $ ~
14889: # SM DECTCEM Visible cursor: esc [ ? 2 5 h
14890: # RM DECTCEM Invisible cursor: esc [ ? 2 5 l
14891: # SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h
14892: # RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l
14893: # SM DECNKM numeric keypad mode: esc [ ? 6 6 h
14894: # RM DECNKM numeric keypad appl.: esc [ ? 6 6 l
14895: # SM DECKBUM clavier informatique esc [ ? 6 8 h
14896: # RM DECKBUM clavier bureautique: esc [ ? 6 8 l
14897: # DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p
14898: # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p
14899: # or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p
14900: # DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p
14901: # Char. and Line attributes: esc [ Ps ... Ps m
14902: # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
14903: # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
14904: #
14905:
14906: # This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310
14907: bq300|Bull vt320 ISO Latin 1 80 columns terminal,
14908: am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
14909: cols#80, it#8, lines#24, vt#3, wsl#80,
14910: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
14911: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
14912: clear=\E[H\E[J, cnorm=\E[?25h, cr=^M,
14913: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D,
14914: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
14915: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
14916: cvvis=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM,
14917: dl1=\E[M, dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX,
14918: ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0,
14919: flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I,
14920: hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED,
14921: is1=\E[63;1"p\E[2h,
14922: is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
14923: is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy,
14924: kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B,
14925: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~,
14926: kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~,
14927: kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~,
14928: kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS,
14929: kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~,
14930: khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
14931: krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4,
14932: mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m,
14933: ri=\EM, rmacs=^O, rmam=\E[?7l, rmcup=\E[?7h, rmir=\E[4l,
14934: rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, rs1=\E[!p,
14935: rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
14936: sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
14937: sgr0=\E[0m\E(B, smacs=^N, smam=\E[?7h,
14938: smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m,
14939: smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~,
14940: bg300-rv|Bull vt320 reverse 80 columns,
14941: flash=\E[?5l$<50>\E[?5h,
14942: is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, use=bq300,
14943: bq300-w|Bull vt320 132 columns,
14944: cols#132, wsl#132,
14945: is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
14946: rs2=\E[?3h,
14947: use=bq300,
14948: bq300-w-rv|Bull vt320 reverse mode 132 columns,
14949: cols#132, wsl#132,
14950: flash=\E[?5l$<50>\E[?5h,
14951: is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
14952: rs2=\E[?3h,
14953: use=bq300,
14954:
14955: # This entry is used for terminals with vt320 emulation mode
14956: # and following set-up :
14957: # 8 bit ISO Latin Character Set (ISO 8859-1),
14958: # 8 bit Control Characters, (CSI coded as x9B for ESC [)
14959: # 80 columns screen.
14960: # Soft Terminal Reset csi ! p
14961: # RIS (erases screen): esc c
14962: # DECKPNM numeric keypad mode: esc >
14963: # DECKPAM applic. keypad mode: esc =
14964: # DECSTBM Scrolling region: esc [ r
14965: # SCS select G0 = US: esc ( B
14966: # SCS select G1 = line-graphic: esc ) 0
14967: # Select 7-bit C1 controls: esc sp F
14968: # Select 8-bit C1 controls: esc sp G
14969: # Select cursor home: csi H
14970: # Select erase screen: csi J
14971: # SM KAM lock keyboard: csi 2 h
14972: # RM KAM unlock keyboard: csi 2 l
14973: # SM SRM local echo off: csi 1 2 h
14974: # RM SRM local echo on: csi 1 2 l
14975: # SM LNM New line : csi 2 0 h
14976: # RM LNM return = CR only: csi 2 0 l
14977: # SM DECCKM cursor keys mode: csi ? 1 h
14978: # RM DECCKM appli. keys mode: csi ? 1 l
14979: # SM DECANM ANSI mode on: csi ? 2 h
14980: # RM DECANM ANSI mode off: csi ? 2 l
14981: # SM DECCOLM 132-column screen: csi ? 3 h
14982: # RM DECCOLM 80-column screen: csi ? 3 l
14983: # SM DECSCLM Smooth scroll: csi ? 4 h
14984: # RM DECSCLM Jump scroll: csi ? 4 l
14985: # SM DECSCNM screen light backgr. csi ? 5 h
14986: # RM DECSCNM screen dark backgr. csi ? 5 l
14987: # SM DECOM move within margins: csi ? 6 h
14988: # RM DECOM move outside margins: csi ? 6 l
14989: # SM DECAWM auto right margin: csi ? 7 h
14990: # RM DECAWM auto right margin: csi ? 7 l
14991: # SM DECARM auto repeat: csi ? 8 h
14992: # RM DECARM auto repeat: csi ? 8 l
14993: # DECSASD Select active main: csi 0 $ }
14994: # DECSASD Select active status: csi 1 $ }
14995: # DECSSDT Select status none: csi 0 $ ~
14996: # DECSSDT Select status indic.: csi 1 $ ~
14997: # DECSSDT Select status host-wr: csi 2 $ ~
14998: # SM DECTCEM Visible cursor: csi ? 2 5 h
14999: # RM DECTCEM Invisible cursor: csi ? 2 5 l
15000: # SM DECNCRM 7 bits NCR set: csi ? 4 2 h
15001: # RM DECNCRM Multi or ISO latin: csi ? 4 2 l
15002: # DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p
15003: # or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p
15004: # DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p
15005: # Char. and Line attributes: csi Ps ... Ps m
15006: # with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse
15007: # and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off
15008: # (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr)
15009: bq300-8|Bull vt320 full 8 bits 80 columns,
15010: am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon,
15011: cols#80, it#8, lines#24, vt#3, wsl#80,
15012: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15013: bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l,
15014: clear=\233H\233J, cnorm=\233?25h, cr=^M,
15015: csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cud=\233%p1%dB,
15016: cuf=\233%p1%dC, cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA,
15017: cvvis=\233?25h, dch=\233%p1%dP, dch1=\233P,
15018: dl=\233%p1%dM, dsl=\2331$}\2332$~\n\2330$},
15019: ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K,
15020: enacs=\E(B\E)0, flash=\233?5h$<50>\233?5l, fsl=\2330$},
15021: home=\233H, ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL,
15022: ind=\ED, is1=\E[63;2"p\E[2h,
15023: is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
15024: is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w,
15025: ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s,
15026: kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A,
15027: kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~,
15028: kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~,
15029: kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~,
15030: kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~,
15031: kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~,
15032: khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~,
15033: krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3,
15034: lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8,
15035: rev=\2337m, ri=\EM, rmacs=^O, rmam=\233?7l, rmcup=\233?7h,
15036: rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m,
15037: rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, sc=\E7,
15038: sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;,
15039: sgr0=\2330m\E(B, smacs=^N, smam=\233?7h,
15040: smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m,
15041: smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~,
15042: bq300-8rv|Bull vt320 8-bit reverse mode 80 columns,
15043: flash=\233?5l$<50>\233?5h,
15044: is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, use=bq300-8,
15045: bq300-8w|Bull vt320 8-bit 132 columns,
15046: cols#132, wsl#132,
15047: is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
15048: rs2=\233?3h,
15049: use=bq300-8,
15050: bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns,
15051: cols#132, wsl#132,
15052: flash=\233?5l$<50>\233?5h,
15053: is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
15054: rs2=\233?3h,
15055: use=bq300-8,
15056:
15057: # This entry is used for terminals with vt320 emulation mode
15058: # a 102 keys keyboard (PC scancode !) and following set-up :
15059: # 8 bit ISO Latin Character Set (ISO 8859-1),
15060: # 7 bit Control Characters,
15061: # 80 columns screen.
15062: bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns,
15063: kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~,
15064: kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@,
15065: kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~,
15066: kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
15067: kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~,
15068: krdo@, kslt@, lf1@, lf2@, lf3@, lf4@,
15069: use=bq300,
15070: bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns,
15071: flash=\E[?5l$<50>\E[?5h,
15072: is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, use=bq300-pc,
15073: bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal,
15074: cols#132, wsl#132,
15075: is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
15076: rs2=\E[?3h,
15077: use=bq300-pc,
15078: bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns,
15079: cols#132, wsl#132,
15080: flash=\E[?5l$<50>\E[?5h,
15081: is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l,
15082: rs2=\E[?3h,
15083: use=bq300-pc,
15084: # 8 bit ISO Latin Character Set (ISO 8859-1),
15085: # 8 bit Control Characters,
15086: # 80 columns screen.
15087: bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns,
15088: kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~,
15089: kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@,
15090: kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@,
15091: kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
15092: kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@,
15093: khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@,
15094: kslt@, lf1@, lf2@, lf3@, lf4@,
15095: use=bq300-8,
15096: bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns,
15097: flash=\E[?5l$<50>\E[?5h,
15098: is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, use=bq300-8-pc,
15099: bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns,
15100: cols#132, wsl#132,
15101: is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
15102: rs2=\E[?3h,
15103: use=bq300-8-pc,
15104: bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns,
15105: cols#132, wsl#132,
15106: flash=\E[?5l$<50>\E[?5h,
15107: is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l,
15108: rs2=\E[?3h,
15109: use=bq300-8-pc,
15110:
15111: #======================================================#
15112: # BULL QUESTAR 310 `VIP 7800/8800' terminals emulation #
15113: #======================================================#
15114:
15115: # normal mode, 8 bits, 80 columns terminal.
15116: # RES reset : ^[e
15117: # RIS reset initial state: ^[c
15118: # BLE bell enable ^[h
15119: # BLD bell disable ^[g
15120: # CAMS char. attr. mode set ^[[D
15121: # CAMR char. attr. mode reset ^[[G
15122: # CLR clear ^[`
15123: # KBU keyboard unlock (set) ^[[W
15124: # KBL keyboard lock (reset) ^[[X
15125: # CM character mode (async.) ^[k
15126: # NEP non echoplex mode (by host) ^[l
15127: # EP echoplex mode (by host) ^[m
15128: # IM insert mode set ^[[I
15129: # IM insert mode reset ^[[J
15130: # RMS roll mode set ^[r
15131: # RMR roll mode reset ^[q
15132: # SM78 set mode vip7800 ^[[1q
15133: # SD scroll up (72 lines) ^[[0s
15134: # SD scroll down (72 lines) ^[[1s
15135: # RBM block mode reset ^[[E
15136: # SLS status line set ^[w
15137: # SLR status line reset ^[v
15138: # SLL status line lock ^[O
15139: # LGS Line-graphic mode set ^[G
15140: # LGR Line-graphic mode reset ^[F
15141: # TBC tab clear (at cursor pos.) ^[[g
15142: # TBI tab initialize ^[[N
15143: # TBS tab set (at cursor pos.) ^[p
15144: # PDS print data space ^[[0p
15145: # PHD print host data ^[[3p
15146: # PDT print data terminator ^[[<p
15147: # PRES print adapter reset ^[[2p
15148: # SSPR multi-part. reset ^[[<>u
15149: # SSP0 partition 0 set ^[[00u
15150: # SSP1 partition n format 1 ^[[PnPnSTRINGu
15151: # SSP2 partition n format 2 ^[[PnPnSTRINGu
15152: # SSP3 partition n format 3 ^[[PnPnu
15153: # ATR attribute (visual)
15154: # blink : ^[sB
15155: # dim : ^[sL
15156: # hide (blank) : ^[sH
15157: # restore : ^[sR
15158: # inverse video : ^[sI
15159: # prot. : ^[sP
15160: # underline : ^[s_
15161: # reset : ^{
15162: #
15163: # This covers the vip7800 and BQ3155-vip7800
15164: vip|Bull Questar 3155-7800,
15165: am, eslok, hs, km, mc5i, msgr, xenl, xon,
15166: cols#80, it#8, lines#24, vt#3, wsl#80,
15167: acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB,
15168: cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15169: cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL,
15170: dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK,
15171: flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I,
15172: hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH,
15173: is2=\E[00u\E[<>001001024080024080u\E[01u,
15174: is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H,
15175: kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB,
15176: kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ,
15177: kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@,
15178: kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1,
15179: kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?,
15180: kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_,
15181: kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER,
15182: khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s,
15183: kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1,
15184: lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p,
15185: mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI,
15186: ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR,
15187: rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG,
15188: sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI,
15189: smul=\Es_, tbc=\E[N, tsl=\Ew,
15190: # normal screen, 8 bits, 132 columns terminal.
15191: vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide,
15192: cols#132, wsl#132,
15193: is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip,
15194: vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines,
15195: lines#72,
15196: is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip,
15197: vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines,
15198: cols#132, lines#72, wsl#132,
15199: is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip,
15200:
1.11 millert 15201: #### Chromatics
1.1 millert 15202: #
15203:
1.11 millert 15204: # I have put the long strings in <smcup>/<rmcup>. Ti sets up a window
15205: # that is smaller than the screen, and puts up a warning message
15206: # outside the window. Te erases the warning message, puts the
15207: # window back to be the whole screen, and puts the cursor at just
15208: # below the small window. I defined <cnorm> and <civis> to really turn
15209: # the cursor on and off, but I have taken this out since I don't
15210: # like the cursor being turned off when vi exits.
15211: cg7900|chromatics|chromatics 7900,
15212: am,
15213: cols#80, lines#40,
15214: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^],
15215: cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2,
15216: ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|,
15217: rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,,
15218: rmso=\001C1\,\001c2\,,
15219: smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,,
15220: smso=\001C4\,\001c7\,, uc=\001\001_\001\0,
15221:
15222: #### Computer Automation
1.1 millert 15223: #
1.11 millert 15224:
15225: ca22851|computer automation 22851,
15226: am,
15227: cols#80, lines#24,
15228: bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I,
15229: cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J,
15230: kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^,
15231:
15232: #### Cybernex
1.1 millert 15233: #
15234:
1.11 millert 15235: # This entry has correct padding and the undocumented "ri" capability
15236: cyb83|xl83|cybernex xl-83,
15237: OTbs, am,
15238: cols#80, lines#24,
15239: bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I,
15240: cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N,
15241: ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H,
15242: kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N,
15243: # (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr)
15244: cyb110|mdl110|cybernex mdl-110,
15245: OTbs, am,
15246: cols#80, lines#24,
15247: bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U,
15248: cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z,
15249: dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>,
15250: ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y,
15251: ht=\011$<43>, ich1=\016A\035$<3.5>,
15252: il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF,
1.1 millert 15253:
1.11 millert 15254: #### Datapoint
15255: #
15256: # Datapoint is gone. They used to be headquartered in Texas.
15257: # They created ARCnet, an Ethernet competitor that flourished for a while
15258: # in the early 1980s before 3COM got wise and cut its prices. The service
15259: # side of Datapoint still lives (1995) in the form of Intelogic Trace.
1.1 millert 15260: #
15261:
1.11 millert 15262: dp3360|datapoint|datapoint 3360,
15263: OTbs, am,
15264: cols#82, lines#25,
15265: bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z,
15266: ed=^_, el=^^, home=^], ind=^J,
15267:
15268: # From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997
15269: # The Datapoint 8242 Workstation was sold at least between 1985
15270: # and 1989. To make the terminal work with this entry, press
15271: # CONTROL-INT-INT to take the terminal off-line, and type (opt).
15272: # Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO
15273: # CR/LF off. Use control-shift-[] as escape key, control-I as tab,
15274: # shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in
15275: # fact unusable because the strings sent by the terminal conflict
15276: # with other keys).
15277: # The terminal is capable of displaying "box draw" characters.
15278: # For each graphic character you must send 2 ESC's (\E\E) followed
15279: # by a control character as follows:
15280: # character meaning
15281: # ========= =======
15282: # ctrl-E top tee
15283: # ctrl-F right tee
15284: # ctrl-G bottom tee
15285: # ctrl-H left tee
15286: # ctrl-I cross
15287: # ctrl-J top left corner
15288: # ctrl-K top right corner
15289: # ctrl-L bottom left corner
15290: # ctrl-M bottom right corner
15291: # ctrl-N horizontal line
15292: # ctrl-O vertical line
15293: # Unfortunately this cannot be fitted into the termcap/terminfo
15294: # description scheme.
15295: dp8242|datapoint 8242,
15296: msgr,
15297: cols#80, lines#25,
15298: bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X,
15299: cr=^M, cub1=^H, cud1=^J,
15300: cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V,
15301: home=^U, ht=^I, il1=\E^T, ind=^C,
15302: is1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
15303: kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee,
15304: kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea,
15305: kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J,
15306: rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D,
15307: rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004,
15308: smso=\E^E, smul=\E^F,
15309: wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025,
1.1 millert 15310:
1.11 millert 15311: #### DEC terminals (Obsolete types: DECwriter and vt40/42/50)
15312: #
15313: # These entries are DEC's official terminfos for its older terminals.
15314: # Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support
15315: # Engineering for more information. Updated terminfos and termcaps
15316: # are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps.
1.1 millert 15317: #
15318:
1.11 millert 15319: gt40|dec gt40,
15320: OTbs, os,
15321: cols#72, lines#30,
15322: bel=^G, cr=^M, cub1=^H, cud1=^J,
15323: gt42|dec gt42,
15324: OTbs, os,
15325: cols#72, lines#40,
15326: bel=^G, cr=^M, cub1=^H, cud1=^J,
15327: vt50|dec vt50,
15328: OTbs,
15329: cols#80, lines#12,
15330: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15331: cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J,
15332: vt50h|dec vt50h,
15333: OTbs,
15334: cols#80, lines#12,
15335: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
15336: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15337: el=\EK, ht=^I, ind=^J, ri=\EI,
15338: # (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>)
15339: vt61|vt-61|vt61.5|dec vt61,
1.1 millert 15340: cols#80, lines#24,
1.11 millert 15341: bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J,
15342: cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>,
15343: cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I,
15344: ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA,
15345: ri=\E$<20>I,
15346:
15347: # The gigi does standout with red!
15348: # (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr)
15349: gigi|vk100|dec gigi graphics terminal,
15350: OTbs, am, xenl,
15351: cols#84, lines#24,
15352: bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H,
15353: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
15354: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J,
15355: el=\E[K, ht=^I, ind=^J,
15356: is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h,
15357: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP,
15358: kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM,
15359: rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15360: sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m,
15361: smul=\E[4m,
15362:
15363: # DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce
15364: # a PC differentiated from the IBM clones. It was a total, ludicrous,
15365: # grossly-overpriced failure (among other things, DEC's OS didn't include
15366: # a format program, so you had to buy pre-formatted floppies from DEC at
15367: # a hefty premium!).
15368: pro350|decpro|dec pro console,
15369: OTbs,
15370: cols#80, it#8, lines#24,
15371: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
15372: clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC,
15373: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ,
15374: el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
15375: kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI,
15376: kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG,
15377: rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D,
1.1 millert 15378:
1.11 millert 15379: dw1|decwriter I,
15380: OTbs, hc, os,
15381: cols#72,
15382: bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J,
15383: dw2|decwriter|dw|decwriter II,
15384: OTbs, hc, os,
15385: cols#132,
15386: bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H,
15387: # \E(B Use U.S. character set (otherwise # => british pound !)
15388: # \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v)
15389: # \E[w 10 char/in pitch
15390: # \E[1;132 full width horizontal margins
15391: # \E[2g clear all tab stops
15392: # \E[z 6 lines/in
15393: # \E[66t 66 lines/page (for \f)
15394: # \E[1;66r full vertical page can be printed
15395: # \E[4g clear vertical tab stops
15396: # \E> disable alternate keypad mode (so it transmits numbers!)
15397: # \E[%i%p1%du set tab stop at column %d (origin == 1)
15398: # (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is
15399: # a tab stop)
1.1 millert 15400: #
1.11 millert 15401: # The dw3 does standout with wide characters.
1.1 millert 15402: #
1.11 millert 15403: dw3|la120|decwriter III,
15404: OTbs, hc, os,
15405: cols#132,
15406: bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J,
15407: is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>,
15408: is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r,
15409: kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w,
15410: dw4|decwriter IV,
15411: OTbs, am, hc, os,
15412: cols#132,
15413: bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H,
15414: kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS,
1.1 millert 15415:
1.11 millert 15416: # These aren't official
15417: ln03|dec ln03 laser printer,
15418: hc,
15419: cols#80, lines#66,
15420: bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J,
15421: rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m,
15422: smul=\E[4m,
15423: ln03-w|dec ln03 laser printer 132 cols,
15424: cols#132,
15425: bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H,
15426: kcud1=^J, nel=^M^J,
15427: use=ln03,
1.1 millert 15428:
1.11 millert 15429: #### Delta Data (dd)
1.1 millert 15430: #
15431:
1.11 millert 15432: # Untested. The cup sequence is hairy enough that it probably needs work.
15433: # The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'.
15434: # There are BSD-derived termcap entries floating around for this puppy
15435: # that are *certainly* wrong.
15436: delta|dd5000|delta data 5000,
15437: OTbs, am,
15438: cols#80, lines#27,
15439: bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y,
15440: cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c,
15441: cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J,
15442:
15443: #### Digital Data Research (ddr)
15444: #
1.1 millert 15445:
1.11 millert 15446: # (ddr: I added <rmam>/<smam> based on the init string -- esr)
15447: ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator,
15448: OTbs, am, xenl,
15449: cols#80, it#8, lines#24, vt#3,
15450: blink=\E[5m$<2/>, bold=\E[1m$<2/>,
15451: clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H,
15452: cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>,
15453: cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H,
15454: ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H,
15455: kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP,
15456: kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>,
15457: rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l,
15458: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>,
15459: rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7,
15460: sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m,
15461: smul=\E[4m$<2/>,
1.1 millert 15462:
1.11 millert 15463: #### Evans & Sutherland
1.1 millert 15464: #
15465:
1.11 millert 15466: # Jon Leech <leech@cs.unc.edu> tells us:
15467: # The ps300 was the Evans & Sutherland Picture System 300, a high
15468: # performance 3D vector graphics system with a bunch of specialized hardware.
15469: # Approximate date of release was 1982 (early 80s, anyway), and it had several
15470: # evolutions including (limited) color versions such as the PS330C. PS300s
15471: # were effectively obsolete by the late 80s, replaced by raster graphics
15472: # systems, although specialized applications like molecular modelling
15473: # hung onto them for a while longer. AFAIK all E&S vector graphics systems
15474: # are out of production, though of course E&S is very much alive (in 1996).
15475: # (ps300: changed ":pt@:" to "it@" -- esr)
15476: #
15477: ps300|Picture System 300,
15478: xt,
15479: it@,
15480: rmso@, rmul@, smso@, smul@, use=vt100,
1.1 millert 15481:
1.11 millert 15482: #### General Electric (ge)
1.1 millert 15483: #
15484:
1.11 millert 15485: terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200,
15486: OTbs, hc, os,
15487: cols#120,
15488: bel=^G, cr=^M, cud1=^J, ind=^J,
1.1 millert 15489:
1.11 millert 15490: #### Heathkit/Zenith
1.1 millert 15491: #
1.11 millert 15492:
15493: # Here is a description of the H19 DIP switches:
1.1 millert 15494: #
1.11 millert 15495: # S401
15496: # 0-3 = baud rate as follows:
15497: #
15498: # 3 2 1 0
15499: # --- --- --- ---
15500: # 0 0 1 1 300 baud
15501: # 0 1 0 1 1200 baud
15502: # 1 0 0 0 2400 baud
15503: # 1 0 1 0 4800 baud
15504: # 1 1 0 0 9600 baud
15505: # 1 1 0 1 19.2K baud
1.1 millert 15506: #
1.11 millert 15507: # 4 = parity (0 = no parity)
15508: # 5 = even parity (0 = odd parity)
15509: # 6 = stick parity (0 = normal parity)
15510: # 7 = full duplex (0 = half duplex)
1.1 millert 15511: #
1.11 millert 15512: # S402
15513: # 0 = block cursor (0 = underscore cursor)
15514: # 1 = no key click (0 = keyclick)
15515: # 2 = wrap at end of line (0 = no wrap)
15516: # 3 = auto LF on CR (0 = no LF on CR)
15517: # 4 = auto CR on LF (0 = no CR on LF)
15518: # 5 = ANSI mode (0 = VT52 mode)
15519: # 6 = keypad shifted (0 = keypad unshifted)
15520: # 7 = 50Hz refresh (1 = 60Hz refresh)
1.1 millert 15521: #
1.11 millert 15522: # Factory Default settings are as follows:
15523: # 7 6 5 4 3 2 1 0
15524: # S401 1 0 0 0 1 1 0 0
15525: # S402 0 0 0 0 0 0 0 0
15526: # (h19: I added <rmam>/<smam> based on the init string;
15527: # also added empty <acsc> to suppress a tic warning -- esr)
15528: h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode,
15529: OTbs, am, mir, msgr,
15530: cols#80, it#8, lines#24,
15531: acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H,
15532: cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH,
15533: cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>,
15534: ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J,
15535: is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h,
15536: kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A,
15537: kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP,
15538: kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white,
15539: ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m,
15540: smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m,
15541: h19-bs|heathkit w/keypad shifted,
15542: rmkx=\Eu, smkx=\Et, use=h19-b,
15543: h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor,
15544: rmkx=\Eu, smkx=\Et,
15545: use=h19-u,
15546: # (h19: merged in <ip> from BSDI hp19-e entry>;
15547: # also added empty <acsc> to suppress a tic warning --esr)
15548: # From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998
15549: # Tim tells us that:
15550: # I have an old Zenith-19 terminal at home that still gets a lot of use.
15551: # This terminal suffers from the same famous insert-mode padding lossage
15552: # that has been acknowledged for the Z29 terminal. Emacs is nearly
15553: # unusable on this box, since even a half-scroll up or down the window
15554: # causes flaming terminal death.
15555: #
15556: # On the Z19, the only way I have found around this problem is to remove
15557: # the :al: and :dl: entries entirely. No amount of extra padding will
15558: # help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$>
15559: # makes Emacs a little slower, but it remains in the land of the living.
15560: # Big win.
15561: h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19,
15562: OTbs, am, eslok, hs, mir, msgr,
15563: cols#80, it#8, lines#24,
15564: acsc=, bel=^G, clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB,
15565: cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
15566: cvvis=\Ex4, dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH,
15567: ht=^I, ind=^J, ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB,
15568: kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
15569: kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue,
15570: lf7=red, lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq,
15571: smacs=\EF, smir=\E@, smso=\Ep,
15572: tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo,
15573: h19-u|heathkit with underscore cursor,
15574: cnorm@, cvvis@, use=h19-b,
15575: h19-g|h19g|heathkit w/block cursor,
15576: cnorm=\Ex4, use=h19-b,
15577: alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19,
15578: lines#60,
15579: dl1=\EM, il1=\EL, use=h19,
1.1 millert 15580:
1.11 millert 15581: # The major problem with the Z29 is that it requires more padding than the Z19.
1.1 millert 15582: #
1.11 millert 15583: # The problem with declaring an H19 to be synonymous with a Z29 is that
15584: # it needs more padding. It especially loses if a program attempts
15585: # to put the Z29 into insert mode and insert text at 9600 baud. It
15586: # even loses worse if the program attempts to insert tabs at 9600
15587: # baud. Adding padding to text that is inserted loses because in
15588: # order to make the Z29 not die, one must add so much padding that
15589: # whenever the program tries to use insert mode, the effective
15590: # rate is about 110 baud.
15591: #
15592: # What program would want to put the terminal into insert mode
15593: # and shove stuff at it at 9600 baud you ask?
15594: #
15595: # Emacs. Emacs seems to want to do the mathematically optimal
15596: # thing in doing a redisplay rather than the practical thing.
15597: # When it is about to output a line on top of a line that is
15598: # already on the screen, instead of just killing to the end of
15599: # the line and outputting the new line, it compares the old line
15600: # and the new line and if there are any similarities, it
15601: # constructs the new line by deleting the text on the old line
15602: # on the terminal that is already there and then inserting new
15603: # text into the line to transform it into the new line that is
15604: # to be displayed. The Z29 does not react kindly to this.
15605: #
15606: # But don't cry for too long.... There is a solution. You can make
15607: # a termcap entry for the Z29 that says the Z29 has no insert mode.
15608: # Then Emacs cannot use it. "Oh, no, but now inserting into a
15609: # line will be really slow", you say. Well there is a sort of a
15610: # solution to that too. There is an insert character option on
15611: # the Z29 that will insert one character. Unfortunately, it
15612: # involves putting the terminal into ansi mode, inserting the
15613: # character, and changing it back to H19 mode. All this takes 12
15614: # characters. Pretty expensive to insert one character, but it
15615: # works. Either Emacs doesn't try to use its inserting hack when
15616: # it's only given an insert character ability or the Z29 doesn't
15617: # require padding with this (the former is probably more likely,
15618: # but I haven't checked it out).
15619: # (z29: added empty <acsc> to suppress a tic warning, merged in
15620: # status line capabilities from BRL entry --esr)
15621: z29|zenith29|z29b|zenith z29b,
15622: OTbs, OTpt, am, eslok, hs, mir, msgr,
15623: OTkn#10, cols#80, lines#24,
15624: OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4,
15625: cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
15626: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A,
15627: cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1,
15628: ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I,
15629: ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>,
15630: is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC,
15631: kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV,
15632: kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH,
15633: lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq,
15634: rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8,
15635: tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
15636: # z29 in ansi mode. Assumes that the cursor is in the correct state, and that
15637: # the world is stable. <rs1> causes the terminal to be reset to the state
15638: # indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore
15639: # cursor, bc -> block cursor.
15640: # From: Mike Meyers
15641: # (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts>
15642: # looks vt100-compatible -- esr)
15643: z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode,
15644: OTbs, OTpt, am, eslok, hs, mir, msgr,
15645: OTkn#10, cols#80, it#8, lines#24,
15646: OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J,
15647: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15648: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
15649: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15650: dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
15651: dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, home=\E[H,
15652: ht=^I, hts=\EH, if=/usr/share/tabset/vt100, il=\E[%p1%dL,
15653: ind=\ED, kbs=^H, kclr=\E[J, kcub1=\EOD, kcud1=\EOB,
15654: kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, kf0=\E[~, kf1=\EOS,
15655: kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
15656: kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, mc0=\E#7,
15657: nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, rmcup=\E[?7h,
15658: rmso=\E[m, rmul=\E[m,
15659: rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m,
15660: sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m,
15661: tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K,
15662: z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor,
15663: rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m,
15664: use=z29a,
15665: z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick,
15666: rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m,
15667: use=z29a,
15668: z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick,
15669: rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m,
15670: use=z29a,
15671: # From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995
15672: z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode,
15673: am, eslok, hs, mc5i, mir, msgr, xon,
15674: cols#80, lines#24,
15675: acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G,
15676: blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h,
15677: clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M,
15678: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15679: cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C,
15680: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
15681: dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM,
15682: dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K,
15683: fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L,
15684: ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw,
15685: ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D,
15686: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS,
15687: kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ,
15688: kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H,
15689: mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m,
15690: rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m,
15691: rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0,
15692: smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g,
15693: tsl=\E[s\E[>1h\E[25;%i%p1%dH,
1.1 millert 15694:
1.11 millert 15695: # From: Brad Brahms <Brahms@USC-ECLC>
15696: z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor,
15697: cnorm=\Ey4\Em70, cvvis=\Ex4\Em71,
15698: use=z100bw,
15699: # (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr)
15700: z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc,
15701: OTbs, OTpt, mir, msgr,
15702: OTkn#10, cols#80, it#8, lines#24,
15703: acsc=, clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB,
15704: cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>,
15705: cuu1=\EA, cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>,
15706: ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H,
15707: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES,
15708: kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER,
15709: kf9=\EOI, khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq,
15710: smacs=\EF, smir=\E@, smso=\Ep,
15711: p19|h19-b with il1/dl1,
15712: dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b,
15713: # From: <ucscc!B.fiatlux@ucbvax.berkeley.edu>
15714: # (ztx: removed duplicate :sr: -- esr)
15715: ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11,
15716: OTbs, am, eslok, hs,
15717: cols#80, it#8, lines#24,
15718: clear=\EE, cub1=^H, cud1=^J, cuf1=\EC,
15719: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM,
15720: dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I,
15721: il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>,
15722: kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES,
15723: kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER,
15724: ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2,
15725: tsl=\Ej\Ex5\Ex1\EY8%+ \Eo,
1.1 millert 15726:
1.11 millert 15727: #### IMS International (ims)
1.1 millert 15728: #
1.11 millert 15729: # There was a company called IMS International located in Carson City,
15730: # Nevada, that flourished from the mid-70s to mid-80s. They made S-100
15731: # bus/Z80 hardware and a line of terminals called Ultimas.
1.1 millert 15732: #
15733:
1.11 millert 15734: # From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985
15735: ims950-b|bare ims950 no init string,
15736: is2@, use=ims950,
15737: # (ims950: removed obsolete ":ko@:" -- esr)
15738: ims950|ims televideo 950 emulation,
15739: xenl@,
15740: flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
15741: kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@,
15742: use=tvi950,
15743: # (ims950-rv: removed obsolete ":ko@:" -- esr)
15744: ims950-rv|ims tvi950 rev video,
15745: xenl@,
15746: flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@,
15747: kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@,
15748: use=tvi950-rv,
15749: ims-ansi|ultima2|ultimaII|IMS Ultima II,
15750: OTbs, am,
15751: cols#80, it#8, lines#24,
15752: clear=\E[H\E[2J, cub1=^H, cud1=\ED,
15753: cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K,
15754: ht=^I, if=/usr/share/tabset/vt100,
15755: is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D,
15756: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM,
15757: rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m,
15758: smul=\E[4m,
1.1 millert 15759:
1.11 millert 15760: #### Intertec Data Systems
1.1 millert 15761: #
1.11 millert 15762: # I think this company is long dead as of 1995. They made an early CP/M
15763: # micro called the "Intertec Superbrain" that was moderately popular,
15764: # then sank out of sight.
1.1 millert 15765: #
15766:
1.11 millert 15767: superbrain|intertec superbrain,
15768: OTbs, am, bw,
15769: cols#80, lines#24,
15770: OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J,
15771: cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K,
15772: ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U,
15773: kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L,
15774: # (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>,
15775: # rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM,
15776: # and the reverse is actually true. Try it. -- esr)
15777: intertube|intertec|Intertec InterTube,
15778: OTbs, am,
15779: cols#80, lines#25,
15780: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F,
15781: cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A,
15782: ind=^J, rmso=\E0@, smso=\E0P,
15783: # The intertube 2 has the "full duplex" problem like the tek 4025: if you
15784: # are typing and a command comes in, the keystrokes you type get interspersed
15785: # with the command and it messes up
15786: intertube2|intertec data systems intertube 2,
15787: OTbs,
15788: cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c,
15789: el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c,
15790: ll=^K^X\r, vpa=\013%p1%c,
15791: use=intertube,
1.1 millert 15792:
1.11 millert 15793: #### Ithaca Intersystems
1.1 millert 15794: #
1.11 millert 15795: # This company made S100-bus personal computers long ago in the pre-IBM-PC
15796: # past. They used to be reachable at:
1.1 millert 15797: #
1.11 millert 15798: # Ithaca Intersystems
15799: # 1650 Hanshaw Road
15800: # Ithaca, New York 14850
1.1 millert 15801: #
1.11 millert 15802: # However, the outfit went bankrupt years ago.
1.1 millert 15803: #
15804:
1.11 millert 15805: # The Graphos III was a color graphics terminal from Ithaca Intersystems.
15806: # These entries were written (originally in termcap syntax) by Brian Yandell
15807: # <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the
15808: # University of Wisconsin.
15809:
15810: # (graphos: removed obsolete and syntactically incorrect :kn=4:,
15811: # removed <if=/usr/share/tabset/init.graphos> and
15812: # <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr)
15813: graphos|graphos III,
15814: am, mir,
15815: cols#80, it#8, lines#24,
15816: clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z,
15817: cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B,
15818: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
15819: cuu=\E[%p1%dA, cuu1=\E[A,
15820: cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM,
15821: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL,
15822: il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
15823: kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR,
15824: kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l,
15825: rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h,
15826: smir=\E[4h, smso=\E[7m,
15827: graphos-30|graphos III with 30 lines,
15828: lines#30,
15829: cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos,
1.1 millert 15830:
1.11 millert 15831: #### Modgraph
15832: #
15833: # These people used to be reachable at:
1.1 millert 15834: #
1.11 millert 15835: # Modgraph, Inc
15836: # 1393 Main Street,
15837: # Waltham, MA 02154
15838: # Vox: (617)-890-5796.
1.1 millert 15839: #
1.11 millert 15840: # However, if you call that number today you'll get an insurance company.
15841: # I have mail from "Michael Berman, V.P. Sales, Modgraph" dated
15842: # 26 Feb 1997 that says:
1.1 millert 15843: #
1.11 millert 15844: # Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been
15845: # for ~7 years. Modgraph still in business. Products are rugged laptop and
15846: # portable PC's and specialized CRT and LCD monitors (rugged, rack-mount
15847: # panel-mount etc). I can be emailed at sonfour@aol.com
1.1 millert 15848: #
1.11 millert 15849: # Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was
15850: # dated 1984. According to the manual, it featured Tek 4010/4014
15851: # graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard.
1.1 millert 15852: #
1.11 millert 15853:
15854: modgraph|mod24|modgraph terminal emulating vt100,
15855: xenl@,
15856: cols#80, lines#24,
15857: cvvis=\E\^9;0s\E\^7;1s,
15858: is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s,
15859: rf@, ri=\EM\E[K$<5/>,
15860: use=vt100,
15861: # The GX-1000 manual is dated 1984. This looks rather like a VT-52.
15862: modgraph2|modgraph gx-1000 80x24 with keypad not enabled,
15863: am, da, db,
15864: cols#80, it#8, lines#24,
15865: clear=\EH\EJ$<50/>, cub1=^H, cuf1=\EC$<2/>,
15866: cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, cuu1=\EA$<2/>,
15867: ed=\EJ$<50/>, el=\EK$<3/>, ht=^I,
15868: is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1,
15869: ri=\EI$<5/>,
1.1 millert 15870: #
1.11 millert 15871: # Modgraph from Nancy L. Cider <nancyc@brl-tbd>
15872: # BUG NOTE from Barbara E. Ringers <barb@brl-tbd>:
15873: # If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a
15874: # mark and using delete-to-killbuffer work correctly. However, we would
15875: # like normal mode of operation to be using a Modgraph with 48 line setting.
15876: # If we set TERM=mod (which is a valid entry in termcap with 48 lines)
15877: # the setting mark and delete-to-killbuffer results in the deletion of only
15878: # the line the mark is set on.
15879: # We've discovered that the delete-to-killbuffer works correctly
15880: # with TERM=mod and screen set to 80x48 but it's not obvious. Only
15881: # the first line disappears but a ctrl-l shows that it did work
15882: # correctly.
15883: modgraph48|mod|Modgraph w/48 lines,
15884: OTbs, OTpt, am, xenl,
15885: cols#80, it#8, lines#48, vt#3,
15886: OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J,
15887: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C,
15888: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K,
15889: flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q,
15890: home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h,
15891: kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
15892: kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m,
15893: ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
15894: rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=,
15895: smso=\E[7m, smul=\E[4m,
15896:
15897: #### Morrow Designs
15898: #
15899: # This was George Morrow's company. They started in the late 1970s making
15900: # S100-bus machines. They used to be reachable at:
1.1 millert 15901: #
1.11 millert 15902: # Morrow
15903: # 600 McCormick St.
15904: # San Leandro, CA 94577
1.1 millert 15905: #
1.11 millert 15906: # but they're long gone now (1995).
1.1 millert 15907: #
1.11 millert 15908:
15909: # The mt70 terminal was shipped with the Morrow MD-3 microcomputer.
15910: # Jeff's specimen was dated June 1984.
15911: # From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995
15912: mt70|mt-70|Morrow MD-70; native Morrow mode,
15913: am, mir, msgr, xon,
15914: cols#80, it#8, lines#24,
15915: acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G,
15916: cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H,
15917: cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>,
15918: cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>,
15919: flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE,
15920: ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r,
15921: kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r,
15922: kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r,
15923: kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r,
15924: kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r,
15925: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
15926: kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_,
15927: rmacs=\E%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E], smul=\EG1,
15928: tbc=\E0,
15929: use=adm+sgr,
15930:
15931: #### Motorola
1.1 millert 15932: #
1.11 millert 15933:
15934: # Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL
15935: # (Seth H Zirin)
15936: ex155|Motorola Exorterm 155,
15937: OTbs, am, bw,
15938: OTkn#5, OTug#1, cols#80, lines#24,
15939: cbt=\E[, clear=\EX, cud1=\EB, cuf1=\ED,
15940: cup=\EE%p1%{32}%+%c%p2%{32}%+%c, ed=\ET, el=\EU,
15941: home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H,
15942: kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@,
15943: rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED,
15944:
15945: #### Omron
1.1 millert 15946: #
1.11 millert 15947: # This company is still around in 1995, manufacturing point-of-sale systems.
15948:
15949: omron|Omron 8025AG,
15950: OTbs, am, da, db,
15951: cols#80, lines#24,
15952: bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA,
15953: cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH,
15954: il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef,
15955:
15956: #### Ramtek
1.1 millert 15957: #
1.11 millert 15958: # Ramtek was a vendor of high-end graphics terminals around 1979-1983; they
15959: # were competition for things like the Tektronics 4025.
1.1 millert 15960: #
15961:
1.11 millert 15962: # Ramtek 6221 from BRL, probably by Doug Gwyn
15963: # The following SET-UP modes are assumed for normal operation:
15964: # UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON
15965: # NEWLINE_OFF 80_COLUMNS
15966: # Other SET-UP modes may be set for operator convenience or communication
15967: # requirements; I recommend
15968: # SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON
15969: # Hardware tabs are assumed to be every 8 columns; they can be set up by the
15970: # "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this).
15971: # Note that the Control-E key is useless on this brain-damaged terminal. No
15972: # delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control!
15973: rt6221|Ramtek 6221 80x24,
15974: OTbs, OTpt, msgr, xon,
15975: OTkn#4, cols#80, it#8, lines#24, vt#3,
15976: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l,
15977: clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M,
15978: csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
15979: cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C,
15980: cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM,
15981: cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I,
15982: hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B,
15983: kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR,
15984: kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H,
15985: nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>,
15986: rmso=\E[m, rmul=\E[m,
15987: rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>,
15988: sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m,
15989: smul=\E[4m, tbc=\E[3g,
15990: # [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)].
15991: rt6221-w|Ramtek 6221 160x48,
15992: cols#160, lines#48,
15993: ll=\E[48;1H, use=rt6221,
15994:
15995: #### RCA
1.1 millert 15996: #
15997:
1.11 millert 15998: # RCA VP3301 or VP3501
15999: rca|rca vp3301/vp3501,
16000: OTbs,
16001: cols#40, lines#24,
16002: clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16003: cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1,
1.1 millert 16004:
16005:
1.11 millert 16006: #### Selanar
1.1 millert 16007: #
16008:
1.11 millert 16009: # Selanar HiREZ-100 from BRL, probably by Doug Gwyn
16010: # The following SET-UP modes are assumed for normal operation:
16011: # SET_DEFAULT_TABS 48_LINES 80_COLUMNS
16012: # ONLINE ANSI CURSOR_VISIBLE
16013: # VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF
16014: # LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED
16015: # CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN
16016: # For use with graphics software, all graphics modes should be set to factory
16017: # default. Other SET-UP modes may be set for operator convenience or
16018: # communication requirements. No delays are specified; use "stty ixon -ixany"
16019: # to enable DC3/DC1 flow control!
16020: # I commented out the scrolling capabilities since they are too slow.
16021: hirez100|Selanar HiREZ-100,
16022: OTbs, OTpt, mir, msgr, xon,
16023: OTkn#4, cols#80, it#8, lines#48, vt#3,
16024: acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J,
16025: cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16026: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16027: cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P,
16028: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16029: hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H,
16030: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP,
16031: kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3,
16032: lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i,
16033: mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O,
16034: rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
16035: rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>,
16036: sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m,
16037: smul=\E[4m, tbc=\E[3g,
16038: hirez100-w|Selanar HiREZ-100 in 132-column mode,
16039: cols#132, use=hirez100,
16040:
16041: #### Signetics
1.1 millert 16042: #
16043:
1.11 millert 16044: # From University of Wisconsin
16045: vsc|Signetics Vsc Video driver by RMC,
16046: am, msgr,
16047: cols#80, it#8, lines#26,
16048: clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C,
16049: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H,
16050: ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s,
16051: rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_",
1.1 millert 16052:
1.11 millert 16053: #### Soroc
1.1 millert 16054: #
1.11 millert 16055: # Alan Frisbie <frisbie@flying-disk.com> writes:
1.1 millert 16056: #
1.11 millert 16057: # As you may recall, the Soroc logo consisted of their name,
16058: # with the letter "S" superimposed over an odd design. This
16059: # consisted of a circle with a slightly smaller 15 degree (approx.)
16060: # wedge with rounded corners inside it. The color was sort of
16061: # a metallic gold/yellow.
16062: #
16063: # If I had been more of a beer drinker it might have been obvious
16064: # to me, but it took a clue from their service department to make
16065: # me exclaim, "Of course!" The circular object was the top of
16066: # a beer can (the old removable pop-top style) and "Soroc" was an
16067: # anagram for "Coors".
16068: #
16069: # I can just imagine the founders of the company sitting around
16070: # one evening, tossing back a few and trying to decide what to
16071: # call their new company and what to use for a logo.
16072: #
1.1 millert 16073:
1.11 millert 16074: # (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr)
16075: soroc120|iq120|soroc|soroc iq120,
16076: clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J,
16077: kcuf1=^L, kcuu1=^K,
16078: use=adm3a,
16079: soroc140|iq140|soroc iq140,
1.1 millert 16080: OTbs, am, mir,
1.11 millert 16081: cols#80, lines#24,
16082: bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16083: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew,
16084: dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J,
16085: kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r,
16086: kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r,
16087: kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8,
16088: rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A,
1.1 millert 16089:
1.11 millert 16090: #### Southwest Technical Products
1.1 millert 16091: #
1.11 millert 16092: # These guys made an early personal micro called the M6800.
16093: # The ct82 was probably its console terminal.
1.1 millert 16094: #
16095:
1.11 millert 16096: # (swtp: removed obsolete ":bc=^D:" -- esr)
16097: swtp|ct82|southwest technical products ct82,
1.1 millert 16098: am,
1.11 millert 16099: cols#82, lines#20,
16100: bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S,
16101: cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F,
16102: home=^P, ich1=^\^X, il1=^\^Y, ind=^N,
16103: is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011,
16104: ll=^C, ri=^O, rmso=^^^F, smso=^^^V,
1.1 millert 16105:
1.11 millert 16106: #### Synertek
16107: #
16108: # Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995):
1.1 millert 16109: #
1.11 millert 16110: # Synertek used to make ICs, various 6502-based single-board process
16111: # control and hobbyist computers, and assorted peripherals including a
16112: # series of small inexpensive terminals (I think they were one of the
16113: # first to have a "terminal-on-a-keyboard", where the terminal itself
16114: # was only slightly larger than the keyboard).
1.1 millert 16115: #
1.11 millert 16116: # They apparently had a KTM-1 model, which I've never seen. The KTM-2/40
16117: # was a 40x24 terminal that could connect to a standard TV through a
16118: # video modulator. The KTM-2/80 was the 80-column version (the 2/40
16119: # could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM).
16120: # I have a KTM-2/80 still in working order. The KTM-2s had fully
16121: # socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program
16122: # ROM and 2 ROMs as character generators. They were incredibly simple,
16123: # and I've never had any problems with mine (witness the fact that mine
16124: # was made in 1981 and is still working great... I've blown the video
16125: # output transistor a couple of times, but it's a 2N2222 :-)
1.1 millert 16126: #
1.11 millert 16127: # The KTM-3 (which is what is listed in the terminfo file) was their
16128: # attempt at putting a KTM-2 in a box (and some models came with a
16129: # CRT). It wasn't much different from the KTM-2 hardware-wise, but the
16130: # control and escape sequences are very different. The KTM-3 was always
16131: # real broken, at least according to the folks I've talked to about it.
16132: #
16133: # The padding in the entry is probably off--these terminals were very
16134: # slow (it takes like 100ms for the KTM-2 to clear the screen...) And
16135: # anyone with any sanity replaced the ROMs with something that provided
16136: # a reasonable subset of VT100 functionality, since the usual ROMs were
16137: # obviously very primitive... oh, you could get an upgraded ROM from
16138: # Synertek for some incredible amount of money, but what hacker with an
16139: # EPROM burner would do that? :)
16140: #
16141: # Sorry I don't have any contact info; I believe they were located in
16142: # Sunnyvale, and I'm fairly sure they are still manufacturing ICs
16143: # (they've gone to ASICs and FPGAs), but I doubt they're in the computer
16144: # business these days.
1.1 millert 16145: #
16146:
1.11 millert 16147: # Tested, seems to work fine with vi.
16148: synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal,
16149: am,
1.1 millert 16150: cols#80, lines#24,
1.11 millert 16151: clear=^Z, cub1=^H, cuf1=^L,
16152: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
16153:
16154: #### Tab Office Products
16155: #
16156: # TAB Products Co. - Palo Alto, California
16157: # Electronic Office Products,
16158: # 1451 California Avenue 94304
16159: #
16160: # I think they're out of business.
16161: #
1.1 millert 16162:
1.11 millert 16163: # The tab 132 uses xon/xoff, so no padding needed.
16164: # <smkx>/<rmkx> have nothing to do with arrow keys.
16165: # <is2> sets 80 col mode, normal video, autowrap on (for <am>).
16166: # Seems to be no way to get rid of status line.
16167: # The manual for this puppy was dated June 1981. It claims to be VT52-
16168: # compatible but looks more vt100-like.
16169: tab132|tab|tab132-15|tab 132/15,
16170: da, db,
16171: OTdN@, cols#80, lines#24, lm#96,
16172: cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M,
16173: il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B,
16174: kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@,
16175: use=vt100,
16176: tab132-w|tab132 in wide mode,
16177: cols#132,
16178: is2=\E[?7h\E[?3h\E[?5l, use=tab132,
16179: tab132-rv|tab132 in reverse-video mode,
16180: is2=\E[?7h\E[?3l\E[?5h, use=tab132,
16181: tab132-w-rv|tab132 in reverse-video/wide mode,
16182: is2=\E[?7h\E[?3h\E[?5h,
16183: use=tab132-w,
1.1 millert 16184:
16185:
1.11 millert 16186: #### Teleray
16187: #
16188: # Research Incorporated
16189: # 6425 Flying Cloud Drive
16190: # Eden Prairie, MN 55344
16191: # Vox: (612)-941-3300
16192: #
16193: # The Teleray terminals were all discontinued in 1992-93. RI still services
16194: # and repairs these beasts, but no longer manufactures them. The Teleray
16195: # people believe that all the types listed below are very rare now (1995).
16196: # There was a newer line of Telerays (Model 7, Model 20, Model 30, and
16197: # Model 100) that were ANSI-compatible.
1.1 millert 16198: #
1.11 millert 16199: # Note two things called "teleray". Reorder should move the common one
16200: # to the front if you have either. A dumb teleray with the cursor stuck
16201: # on the bottom and no obvious model number is probably a 3700.
1.1 millert 16202: #
16203:
1.11 millert 16204: t3700|dumb teleray 3700,
16205: OTbs,
16206: cols#80, lines#24,
16207: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J,
16208: t3800|teleray 3800 series,
16209: OTbs,
16210: cols#80, it#8, lines#24,
16211: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16212: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK,
16213: home=\EH, ht=^I, ind=^J, ll=\EY7\s,
16214: t1061|teleray|teleray 1061,
16215: OTbs, am, km, xhp, xt,
16216: cols#80, it#8, lines#24, xmc#1,
16217: bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16218: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16219: dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF,
16220: ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>,
16221: is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef,
16222: kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7,
16223: kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH,
16224: tbc=\EG,
16225: t1061f|teleray 1061 with fast PROMs,
16226: dl1=\EM, il1=\EL, ip@, use=t1061,
16227: # "Teleray Arpa Special", officially designated as
16228: # "Teleray Arpa network model 10" with "Special feature 720".
16229: # This is the new (1981) fast microcode updating the older "arpa" proms
16230: # (which gave meta-key and programmable-fxn keys). 720 is much much faster,
16231: # converts the keypad to programmable function keys, and has other goodies.
16232: # Standout mode is still broken (magic cookie, etc) so is suppressed as no
16233: # programs handle such lossage properly.
16234: # Note: this is NOT the old termcap's "t1061f with fast proms."
16235: # From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah
16236: # (t10: removed overridden ":so@:se@:us@:ue@:" -- esr)
16237: t10|teleray 10 special,
16238: OTbs, km, xhp, xt,
16239: cols#80, it#8, lines#24, xmc#2,
16240: clear=\Ej$<30/>, cub1=^H, cuf1=\EC,
16241: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ,
16242: dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL,
16243: ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD,
16244: smul=\ERH,
16245: # teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and
16246: # back/forth words. Put the function keys (f1-f10) where they can be
16247: # found, and turn off the other magic keys along the top row, except
16248: # for line/local. Do the magic appropriate to make the page shifts work.
16249: # Also toggle ^S/^Q for those of us who use Emacs.
16250: t16|teleray 16,
16251: am, da, db, mir, xhp, xt,
16252: cols#80, lines#24,
16253: bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B,
16254: cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P,
16255: dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L,
16256: ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5,
16257: kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T,
16258: rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m,
16259: rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h,
16260: smso=\E[7m, smul=\E[4m,
1.1 millert 16261:
1.11 millert 16262: #### Texas Instruments (ti)
1.1 millert 16263: #
16264:
1.11 millert 16265: # The Silent 700 was so called because it was built around a quiet thermal
16266: # printer. It was portable, equipped with an acoustic coupler, and pretty
16267: # neat for its day.
16268: ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800,
16269: OTbs, hc, os,
1.1 millert 16270: cols#80,
1.11 millert 16271: bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J,
16272:
1.1 millert 16273: #
1.11 millert 16274: # Texas Instruments 916 VDT 7 bit control mode
1.1 millert 16275: #
1.11 millert 16276: ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL,
16277: da, db, in, msgr,
16278: cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>,
16279: cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB,
16280: cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA,
16281: cvvis=\E[?25h, dch=\E[%p1%dP$<250>, dch1=\E[P,
16282: dl=\E[%p1%dM, ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K,
16283: el1=\E[1K, enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>,
16284: hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>,
16285: il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H,
16286: kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~,
16287: kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~,
16288: kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~,
16289: kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T,
16290: kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p,
16291: smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, use=vt220,
1.1 millert 16292: #
1.11 millert 16293: # Texas Instruments 916 VDT 8 bit control mode
1.1 millert 16294: #
1.11 millert 16295: ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL,
16296: kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C,
16297: kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~,
16298: kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~,
16299: kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~,
16300: kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H,
16301: kich1=\233@, knp=\233S, kpp=\233T, kprt=^X,
16302: use=ti916,
1.1 millert 16303: #
1.11 millert 16304: # Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode
1.1 millert 16305: #
1.11 millert 16306: ti916-132|Texas Instruments 916 VDT vt220 132 column,
16307: cols#132, use=ti916,
1.1 millert 16308: #
1.11 millert 16309: # Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode
1.1 millert 16310: #
1.11 millert 16311: ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column,
16312: cols#132, use=ti916-8,
16313: ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL,
16314: OTbs, am, xon,
16315: cols#80, it#8, lines#24,
16316: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16317: clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
16318: csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
16319: cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
16320: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16321: il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
16322: kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ,
16323: kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~,
16324: kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m,
16325: ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
16326: smul=\E[4m, tbc=\E[3g,
16327: ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL,
16328: am, xon,
16329: cols#80, it#8, lines#24,
16330: bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l,
16331: clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M,
16332: csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C,
16333: cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h,
16334: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH,
16335: il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B,
16336: kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>,
16337: kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>,
16338: kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>,
16339: kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM,
16340: rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m,
16341: smul=\E[4m, tbc=\E[3g,
16342: ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode,
16343: cols#132, use=ti924,
16344: ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode,
16345: cols#132, use=ti924-8,
16346: ti931|Texas Instruments 931 VDT,
16347: OTbs, am, xon,
16348: cols#80, lines#24,
16349: bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED,
16350: cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c,
16351: cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH,
16352: ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H,
16353: is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC,
16354: kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3,
16355: kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9,
16356: kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@,
16357: sgr0=\E4@, smso=\E4A, smul=\E4D,
16358: ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL,
16359: csr@, ind=\E[1S, ri=\E[1T,
16360: use=ti924,
16361: # (ti926-8: I corrected this from the broken SCO entry -- esr)
16362: ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL,
16363: csr@, ind=\2331S, ri=\2331T,
16364: use=ti924-8,
16365: ti_ansi|basic entry for ti928,
16366: am, bce, eo, xenl, xon,
16367: colors#8, cols#80, it#8, lines#25, pairs#64,
16368: bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H,
16369: cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B,
16370: cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P,
16371: dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@,
16372: il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B,
16373: kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M,
16374: kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S,
16375: kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I,
16376: op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m,
16377: setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m,
16378: smso=\E[7m, smul=\E[4m,
1.1 millert 16379: #
1.11 millert 16380: # 928 VDT 7 bit control mode
1.1 millert 16381: #
1.11 millert 16382: ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL,
16383: kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~,
16384: kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~,
16385: kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~,
16386: kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~,
16387: kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~,
16388: use=ti_ansi,
1.1 millert 16389: #
1.11 millert 16390: # 928 VDT 8 bit control mode
1.1 millert 16391: #
1.11 millert 16392: ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL,
16393: kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~,
16394: kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~,
16395: kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~,
16396: kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~,
16397: kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S,
16398: kpp=\233T, kprt=\23335~,
16399: use=ti_ansi,
16400:
16401: #### Zentec (zen)
1.1 millert 16402: #
1.11 millert 16403:
16404: # (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally
16405: # had just <smso>=\EG6 which I think means standout was supposed to be
16406: # dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and
16407: # <invis> might work-- esr)
16408: zen30|z30|zentec 30,
16409: OTbs, am, mir, ul,
16410: cols#80, lines#24,
16411: bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16412: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW,
16413: dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^,
16414: il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6,
16415: smul@,
16416: use=adm+sgr,
16417: # (zen50: this had extension capabilities
16418: # :BS=^U:CL=^V:CR=^B:
16419: # UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh,
16420: # which were also in the original entry -- esr)
16421: # (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr)
16422: zen50|z50|zentec zephyr,
16423: OTbs, am,
16424: cols#80, lines#24, xmc#1,
16425: clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c,
16426: cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE,
16427: invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^,
16428: rmul@, smul@,
16429: use=adm+sgr,
16430:
16431: # CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL
16432: cci|cci1|z8001|zen8001|CCI Custom Zentec 8001,
16433: OTbs, am, bw,
16434: cols#80, lines#24,
16435: blink=\EM", clear=\EH\EJ, cnorm=\EP,
16436: csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J,
16437: cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA,
16438: cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH,
16439: invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED,
16440: kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R,
16441: rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s,
16442: smso=\EM$, smul=\EM0,
16443:
16444: ######## OBSOLETE UNIX CONSOLES
1.1 millert 16445: #
16446:
1.11 millert 16447: #### Apollo consoles
16448: #
16449: # Apollo got bought by Hewlett-Packard. The Apollo workstations are
16450: # labeled HP700s now.
1.1 millert 16451: #
16452:
1.11 millert 16453: # From: Gary Darland <goodmanc@garnet.berkeley.edu>
16454: apollo|apollo console,
16455: OTbs, am, mir,
16456: cols#88, lines#53,
16457: clear=^L, cub1=^H, cud1=\EB, cuf1=\EC,
16458: cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL,
16459: ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED,
16460: rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ,
16461: smso=\ES, smul=\EU, vpa=\EO+\s,
1.1 millert 16462:
1.11 millert 16463: # We don't know whether or not the apollo guys replicated DEC's firmware bug
16464: # in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable
16465: # both these capabilities.
16466: apollo_15P|apollo 15 inch display,
16467: rmir@, smir@, use=vt132,
16468: apollo_19L|apollo 19 inch display,
16469: rmir@, smir@, use=vt132,
16470: apollo_color|apollo color display,
16471: rmir@, smir@, use=vt132,
1.1 millert 16472:
1.11 millert 16473: #### Convergent Technology
1.1 millert 16474: #
1.11 millert 16475: # Burroughs bought Convergent shortly before it merged with Univac.
16476: # CTOS is (I believe) dead. Probably the aws is too (this entry dates
16477: # from 1991 or earlier).
1.1 millert 16478: #
16479:
1.11 millert 16480: # Convergent AWS workstation from Gould/SEL UTX/32 via BRL
16481: # (aws: removed unknown :dn=^K: -- esr)
16482: aws|Convergent Technologies AWS workstation under UTX and Xenix,
16483: am,
16484: OTug#0, cols#80, lines#28, xmc#0,
16485: OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=,
16486: clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A,
16487: dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c,
16488: ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K,
16489: kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF,
16490: rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN,
16491: vpa=\EV%p1%c,
16492: awsc|Convergent Technologies AWS workstation under CTOS,
16493: am,
16494: OTug#0, cols#80, lines#24, xmc#0,
16495: OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L,
16496: cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF,
16497: el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A,
16498: rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE,
16499: smul=\EAC,
16500:
16501: #### DEC consoles
1.1 millert 16502: #
16503:
1.11 millert 16504: # The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes:
16505: # The digital uVax II's had a graphic display called a qdss. It was
16506: # supposed to be a high performance graphic accelerator, but it was
16507: # late to market and barely appeared before faster dumb frame buffers
16508: # appeared. I have only used this display while running X11. However,
16509: # during bootup, it was in text mode, and probably had a terminal emulator
16510: # within it. And that is what your termcap entry is for. In graphics
16511: # mode the screen size is 1024x864 pixels.
16512: qdss|qdcons|qdss glass tty,
16513: OTbs, am,
16514: cols#128, lines#57,
16515: clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L,
16516: cup=\E=%p1%c%p2%c, cuu1=^K,
16517:
16518: #### Fortune Systems consoles
16519: #
16520: # Fortune made a line of 68K-based UNIX boxes that were pretty nifty
16521: # in their day; I (esr) used one myself for a year or so around 1984.
16522: # They had no graphics, though, and couldn't compete against Suns and
16523: # the like. R.I.P.
1.1 millert 16524: #
1.11 millert 16525:
16526: # From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983
16527: # (This had extension capabilities
16528: # :rv=\EH:re=\EI:rg=0:GG=0:\
16529: # :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\
16530: # :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\
16531: # :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F:
16532: # It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had
16533: # ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily)
16534: # to force both magic cookie glitches off. Once upon a time, I
16535: # used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are
16536: # function keys; thus the "Al" value for HM was certainly an error. I renamed
16537: # EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC.
16538: # I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent
16539: # "reverse-video-glitch" capability; I have put :rv: and :re: in with standard
16540: # names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr)
16541: fos|fortune|Fortune system,
16542: OTbs, am, bw,
16543: cols#80, lines#25,
16544: acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E],
16545: clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>,
16546: cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>,
16547: cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>,
16548: ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z,
16549: ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H,
16550: kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r,
16551: kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r,
16552: kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r,
16553: khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH,
16554: rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo,
16555: smso=^\H`, smul=^\HP,
16556:
16557: #### Masscomp consoles
1.1 millert 16558: #
1.11 millert 16559: # Masscomp has gone out of business. Their product line was purchased by
16560: # comany in Georgia (US) called "XS International", parts and service may
16561: # still be available through them.
1.1 millert 16562: #
1.11 millert 16563:
16564: # (masscomp: ":MT:" changed to ":km:"; -- esr)
16565: masscomp|masscomp workstation console,
16566: OTbs, km, mir,
16567: cols#80, it#8, lines#24,
16568: clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C,
16569: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16570: ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H,
16571: kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l,
16572: rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu,
16573: masscomp1|masscomp large screen version 1,
16574: cols#104, lines#36, use=masscomp,
16575: masscomp2|masscomp large screen version 2,
16576: cols#64, lines#21, use=masscomp,
16577:
16578: ######## OTHER OBSOLETE TYPES
1.1 millert 16579: #
1.11 millert 16580: # These terminals are *long* dead -- these entries are retained for
16581: # historical interest only.
1.1 millert 16582: #
16583:
1.11 millert 16584: #### Obsolete non-ANSI software emulations
1.1 millert 16585: #
16586:
16587: # CTRM terminal emulator
16588: # 1. underlining is not allowed with colors: first, is is simulated by
16589: # black on white, second, it disables background color manipulations.
16590: # 2. BLINKING, REVERSE and BOLD are allowed with colors,
16591: # so we have to save their status in the static registers A, B and H
16592: # respectively, to be able to restore them when color changes
16593: # (because any color change turns off ALL attributes)
16594: # 3. <bold> and <rev> sequences alternate modes,
16595: # rather then simply entering them. Thus we have to check the
16596: # static register B and H to determine the status, before sending the
16597: # escape sequence.
16598: # 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero
16599: # and then reset colors
16600: # 5. implementation of the protect mode would badly penalize the performance.
16601: # we would have to use \E&bn sequence to turn off colors (as well as all
16602: # other attributes), and keep the status of protect mode in yet another
16603: # static variable. If someone really needs this mode, they would have to
16604: # create another terminfo entry.
16605: # 6. original color-pair is white on black.
16606: # store the information about colors into static registers
16607: # 7. set foreground color. it performs the following steps.
16608: # 1) turn off all attributes
16609: # 2) turn on the background and video attributes that have been turned
16610: # on before (this information is stored in static registers X,Y,Z,A,B,H,D).
16611: # 3) turn on foreground attributes
16612: # 4) store information about foreground into U,V,W static registers
16613: # 8. turn on background: similar to turn on foreground above
1.11 millert 16614: ctrm|C terminal emulator,
16615: am, bce, xon,
16616: colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0,
16617: pairs#63, pb#19200, vt#6,
16618: bel=^G, blink=\E&dA%{1}%PA,
16619: bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei,
16620: clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16621: cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM,
16622: ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1,
16623: il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r,
16624: kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r,
16625: kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
16626: kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r,
16627: op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU,
16628: rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA,
16629: setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX,
16630: setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU,
16631: sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;,
16632: sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB,
16633: smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY,
1.1 millert 16634:
16635: # gs6300 - can't use blue foreground, it clashes with underline;
16636: # it's simulated with cyan
16637: # Bug: The <op> capability probably resets attributes.
16638: # (gs6300: commented out <rmln> (no <smln>) --esr)
1.11 millert 16639: gs6300|emots|AT&T PC6300 with EMOTS terminal emulator,
16640: am, bce, msgr, xon,
16641: colors#8, cols#80, it#8, lines#24, pairs#63,
16642: acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16643: bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M,
16644: cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J,
16645: cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH,
16646: cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P,
16647: dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I,
16648: ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J,
16649: is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B,
16650: kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s,
16651: kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s,
16652: khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m,
16653: ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm,
16654: setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m,
16655: sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m,
1.1 millert 16656:
16657: # From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT
16658: # MS-Kermit with Heath-19 emulation mode enabled
16659: # (h19k: changed ":pt@:" to ":it@"
16660: h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin),
16661: am@, da, db, xt,
16662: it@,
1.11 millert 16663: ht@, use=h19-u,
1.1 millert 16664:
16665: # Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy
16666: # Software (formerly Peripherals Computers & Supplies, Inc) of
16667: # 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can
16668: # also be reached at support@synergy.com.
16669: versaterm|versaterm vt100 emulator for the macintosh,
16670: am, xenl,
16671: cols#80, it#8, lines#24,
16672: bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>,
1.11 millert 16673: clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr,
16674: cub1=^H, cud1=^J, cuf1=\E[C$<2/>,
16675: cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>,
16676: dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>,
16677: el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>,
16678: il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD,
16679: kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ,
16680: kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>,
16681: rf=/usr/share/tabset/vt100, ri=\EM$<5/>,
16682: rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>,
16683: sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>,
16684: smul=\E[4m$<2/>,
1.1 millert 16685:
16686: # From: Rick Thomas <ihnp4!btlunix!rbt>
16687: # (xtalk: I added <rmam>/<smam> based on the init string.
1.11 millert 16688: xtalk|IBM PC with xtalk communication program (versions up to 3.4),
16689: am, mir, msgr, xon,
16690: cols#80, it#8, lines#24, vt#3, xmc#1,
16691: acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
16692: bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H,
16693: cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>,
16694: cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA,
16695: cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>,
16696: el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH,
16697: il1=\E[L$<99>, ind=^J, ka1=\EOq, ka3=\EOs, kb2=\EOr, kbs=^H,
16698: kc1=\EOp, kc3=\EOn, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC,
16699: kcuu1=\EOA, kent=\EOM, kf0=\EOy, kf1=\EOP, kf10=\EOx,
16700: kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOt, kf6=\EOu, kf7=\EOv,
16701: kf8=\EOl, kf9=\EOw, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l,
16702: rmkx=\E[?1l\E>, rmso=\E[m\s,
16703: rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m,
16704: smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s,
16705: tbc=\E[3g,
1.1 millert 16706:
16707: # The official PC terminal emulator program of the AT&T Product Centers.
16708: # Note - insert mode commented out - doesn't seem to work on AT&T PC.
1.11 millert 16709: simterm|attpc running simterm,
16710: am,
16711: cols#80, lines#24,
16712: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC,
16713: cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER,
16714: dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE,
16715: rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB,
16716:
16717: #### Daisy wheel printers
16718: #
16719: # This section collects Diablo, DTC, Xerox, Qume, and other daisy
16720: # wheel terminals. These are now largely obsolete.
16721: #
16722:
16723: # (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr)
16724: diablo1620|diablo1720|diablo450|ipsi|diablo 1620,
16725: hc, os,
16726: cols#132, it#8,
16727: cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c,
16728: ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2,
16729: diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin,
16730: cols#124,
16731: is2=\r \E9, use=diablo1620,
16732: # (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr)
16733: diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640,
16734: bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE,
16735: use=diablo1620,
16736: # (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such
16737: # file -- esr)
16738: diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin,
16739: cols#124,
16740: rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620,
16741: diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer,
16742: use=diablo1640-lm,
16743: # DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout
16744: # <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>.
16745: # The terminal has tabs, but I'm getting tired of fighting the braindamage.
16746: # If no tab is set or the terminal's in a bad mood, it glitches the screen
16747: # around all of memory. Note that return puts a blank ("a return character")
16748: # in the space the cursor was at, so we use ^P return (and thus ^P newline for
16749: # newline). Note also that if you turn off :pt: and let Unix expand tabs,
16750: # curses won't work (some old BSD versions) because it doesn't clear this bit,
16751: # and cursor addressing sends a tab for row/column 9. What a losing terminal!
16752: # I have been unable to get tabs set in all 96 lines - it always leaves at
16753: # least one line with no tabs in it, and once you tab through that line,
16754: # it completely weirds out.
16755: # (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr)
16756: dtc382|DTC 382,
16757: am, da, db, xhp,
16758: cols#80, lines#24, lm#96,
16759: bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H,
16760: cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB,
16761: dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U,
16762: home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi,
16763: rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P,
16764: dtc300s|DTC 300s,
16765: hc, os,
16766: cols#132,
16767: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
16768: hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
16769: gsi|mystery gsi terminal,
16770: hc, os,
16771: cols#132,
16772: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH,
16773: ind=^J,
16774: aj830|aj832|aj|anderson jacobson,
16775: hc, os,
16776: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8,
16777: ind=^J,
16778: # From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST
16779: aj510|Anderson-Jacobson model 510,
16780: am, mir,
16781: cols#80, lines#24,
16782: clear=^L, cub1=^H, cuf1=\EX,
16783: cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY,
16784: dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=,
16785: il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ,
16786: kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J,
16787: rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I,
16788: smul=\E"U,
16789: # From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981
16790: # This is incomplete, but it's a start.
16791: nec5520|nec|spinwriter|nec 5520,
16792: hc, os,
16793: cols#132, it#8,
16794: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L,
16795: hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J,
16796: kbs=^H, tbc=\E3,
16797: qume5|qume|Qume Sprint 5,
16798: hc, os,
16799: cols#80, it#8,
16800: bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I,
16801: hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3,
16802: # I suspect the xerox 1720 is the same as the diablo 1620.
16803: xerox1720|x1720|x1750|xerox 1720,
16804: hc, os,
16805: cols#132, it#8,
16806: bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J,
16807: tbc=\E2,
1.1 millert 16808:
16809: #### Miscellaneous obsolete terminals, manufacturers unknown
16810: #
16811: # If you have any information about these (like, a manufacturer's name,
16812: # and a date on the serial-number plate) please send it!
16813:
16814: cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars,
1.11 millert 16815: OTbs, am,
1.1 millert 16816: cols#73, lines#36,
16817: clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^,
16818: cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars,
1.11 millert 16819: OTbs, am,
1.1 millert 16820: cols#85, lines#39,
16821: clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3,
1.11 millert 16822: kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7,
16823: kf4=\E8, rmso=\Em^C, smso=\Em^L,
1.1 millert 16824: cops10|cops|cops-10|cops 10,
16825: am, bw,
16826: cols#80, lines#24,
1.11 millert 16827: bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L,
16828: cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V,
16829: ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K,
16830: khome=^Y,
1.1 millert 16831: # (d132: removed duplicate :ic=\E5:,
16832: # merged in capabilities from a BRL entry -- esr)
16833: d132|datagraphix|datagraphix 132a,
16834: da, db, in,
16835: cols#80, lines#30,
1.11 millert 16836: bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J,
16837: cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex,
16838: dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H,
16839: kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew,
1.1 millert 16840: # The d800 was an early portable terminal from c.1984-85 that looked a lot
16841: # like the original Compaq `lunchbox' portable (but no handle). It had a vt220
16842: # mode (which is what this entry looks like) and several other lesser-known
16843: # emulations.
16844: d800|Direct 800/A,
1.11 millert 16845: OTbs, am, da, db, msgr, xhp,
1.1 millert 16846: cols#80, it#8, lines#24,
1.11 millert 16847: acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~,
1.1 millert 16848: bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H,
1.11 millert 16849: cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A,
16850: cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D,
16851: kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ,
16852: kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW,
16853: ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
16854: smacs=\E[1m, smso=\E[7m, smul=\E[4m,
1.1 millert 16855: digilog|digilog 333,
1.11 millert 16856: OTbs,
16857: cols#80, lines#16,
16858: bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X,
16859: home=^N, ind=^J,
1.1 millert 16860: # The DWK was a terminal manufactured in the Soviet Union c.1986
1.11 millert 16861: dwk|dwk-vt|dwk terminal,
16862: am,
16863: cols#80, it#8, lines#24,
16864: acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_,
16865: bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC,
16866: cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP,
16867: ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177,
16868: kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee,
16869: kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5,
16870: kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh,
16871: kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX,
16872: sgr0=\EX, smacs=\EF, smso=\ET,
1.1 millert 16873: env230|envision230|envision 230 graphics terminal,
16874: xenl@,
1.11 millert 16875: mc0=\E[0i, mc4=\E[4i, mc5=\E[5i,
16876: sgr=\E[%?%p1%t;1%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, use=vt100,
1.1 millert 16877: # These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic
16878: # coupler attached, the whole rig fitting in a suitcase and more or less
16879: # portable. Hot stuff for c.1977 :-) -- esr
16880: ep48|ep4080|execuport 4080,
1.11 millert 16881: OTbs, am, os,
1.1 millert 16882: cols#80,
16883: bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J,
16884: ep40|ep4000|execuport 4000,
1.11 millert 16885: cols#136, use=ep4080,
1.14 millert 16886: # Adam Thompson <athompso@pangea.ca> tells us:
1.1 millert 16887: # Informer series - these are all portable units, resembling older
16888: # automatic bread-baking machines. The terminal looks like a `clamshell'
16889: # design, but isn't. The structure is similar to the Direct terminals,
16890: # but only half the width. The entire unit is only about 10" wide.
16891: # It features an 8" screen (6" or 7" if you have color!), and an 9"x6"
16892: # keyboard. All the keys are crammed together, much like some laptop
16893: # PCs today, but perhaps less well organized...all these units have a
16894: # bewildering array of plugs on the back, including a built-in modem.
16895: # The 305 was a color version of the 304; the 306 and 307 were mono and
16896: # color terminals built for IBM bisync protocols.
16897: # From: Paul Leondis <unllab@amber.berkeley.edu>
16898: ifmr|Informer D304,
1.11 millert 16899: OTbs, am,
1.1 millert 16900: cols#80, lines#24,
16901: clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC,
1.11 millert 16902: cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\,
16903: ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK,
16904: smso=\EJ,
1.1 millert 16905: # Entry largely based on wy60 and has the features of wy60ak.
1.11 millert 16906: opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys,
16907: am, bw, hs, km, mir, msgr, ul, xon,
16908: cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80,
16909: acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2,
16910: cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M,
16911: cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K,
16912: dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r,
16913: ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>,
16914: hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J,
16915: ip=$<3>,
16916: is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12,
16917: kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B,
16918: kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY,
16919: kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r,
16920: kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r,
16921: kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r,
16922: kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^,
16923: kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er,
16924: mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>,
16925: pfloc=\EZ2%p1%{63}%+%c%p2%s\177,
16926: pfx=\EZ1%p1%{63}%+%c%p2%s\177,
16927: pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>,
16928: rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11,
16929: rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>,
16930: rs3=\EwG\Ee($<150>,
16931: sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c,
16932: sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/,
16933: smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177,
16934: smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(,
16935: uc=\EG8%p1%c\EG0,
16936: use=adm+sgr,
1.1 millert 16937: teletec|Teletec Datascreen,
1.11 millert 16938: OTbs, am,
1.1 millert 16939: cols#80, lines#24,
16940: bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K,
16941: home=^^, ind=^J,
16942: # From: Mark Dornfeld <romwa@ucbvax.berkeley.edu>
16943: # This description is for the LANPAR Technologies VISION 3220
16944: # terminal from 1984/85. The function key definitions k0-k5 represent the
16945: # edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN,
16946: # NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys.
1.14 millert 16947: #
16948: # Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998:
16949: # I had a couple of scopes (3221) like this once where I used to work, around
16950: # the 1987 time frame if memory serves me correctly. These scopes were made
16951: # by an outfit called LANPAR Technologies, and were meant to me DEC VT 220
16952: # compatible. The 3220 was a plain text terminal like the VT-220, the 3221
16953: # was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222
16954: # was like the VT-241 (color with Regis + Sixel Graphics). These terminals
16955: # (3221) cost about $1500 each, and one was always broken -- had to be sent
16956: # back to the shop for repairs.
16957: # The only real advantage these scopes had over the VT-240's were:
16958: # 1) They were faster in the Regis display, or at least the ones I did
16959: # 2) They had a handy debugging feature where you could split-screen the
16960: # scope, the graphics would appear on the top, and the REGIS commands would
16961: # appear on the bottom. I don't remember the VT-240s being able to do that.
16962: # I would swear that LANPAR Technologies was in MA someplace, but since I
16963: # don't work at the same place anymore, and those terminals and manuals were
16964: # long since junked, I cannot be any more sure than that.
16965: #
1.1 millert 16966: # (v3220: removed obsolete ":kn#10:",
16967: # I added <rmam>/<smam> based on the init string -- esr)
16968: v3220|LANPAR Vision II model 3220/3221/3222,
1.11 millert 16969: OTbs, am, mir, xenl,
1.1 millert 16970: cols#80, it#8, lines#24,
1.11 millert 16971: clear=\E[H\E[J, cub1=^H, cuf1=\E[C,
16972: cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M,
16973: ed=\E[J, el=\E[K, ht=^I, il1=\E[L,
16974: is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B,
16975: kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~,
16976: kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ,
16977: kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l,
16978: rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m,
1.1 millert 16979: smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m,
16980: ######## ICH/ICH1 VERSUS RMIR/SMIR
16981: #
16982: # Some non-curses applications get confused if both ich/ich1 and rmir/smir
16983: # are present; the symptom is doubled characters in an update using insert.
16984: # These applications are technically correct; in both 4.3BSD termcap and
16985: # terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir
16986: # unless the terminal needs both. To my knowledge, no terminal still in this
16987: # file requires both other than the very obsolete dm2500.
16988: #
16989: # For ncurses-based applications this is not a problem, as ncurses uses
16990: # one or the other as appropriate but never mixes the two. Therefore we
16991: # have not corrected entries like `linux' and `xterm' that specify both.
16992: # If you see doubled characters from these, use the linux-nic and xterm-nic
16993: # entries that suppress ich/ich1. And upgrade to ncurses!
16994: #
16995:
16996: ######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS
16997: #
16998: # ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and
16999: # ECMA-48 standards are said to be almost identical, but are not the same
17000: # as X3.64 (though for practical purposes they are close supersets of it).
17001: #
17002: # You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch
17003: # requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for
17004: # Coded Character Sets"), include your snail-mail address, and you should
17005: # receive the document in due course. Don't expect an email acknowledgement.
17006: #
17007: # Related standards include "X3.4-1977: American National Standard Code for
17008: # Information Interchange" (the ASCII standard) and "X3.41.1974:
17009: # Code-Extension Techniques for Use with the 7-Bit Coded Character Set of
17010: # American National Standard for Information Interchange." I believe (but
17011: # am not certain) that these are effectively identical to ECMA-6 and ECMA-35
17012: # respectively.
17013: #
17014:
17015: #### VT100/ANSI/ECMA-48
17016: #
17017: # ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals
17018: # and ECMA-48 Control Functions for Coded Character Sets.
17019: #
17020: # Much of the content of this comment is adapted from a table prepared by
17021: # Richard Shuford, based on a 1984 Byte article. Terminfo correspondences,
17022: # discussion of some terminfo-related issues, and updates to capture ECMA-48
17023: # have been added. Control functions described in ECMA-48 only are tagged
17024: # with * after their names.
17025: #
17026: # The table is a complete list of the defined ANSI X3.64/ECMA-48 control
17027: # sequences. In the main table, \E stands for an escape (\033) character,
17028: # SPC for space. Pn stands for a single numeric parameter to be inserted
17029: # in decimal ASCII. Ps stands for a list of such parameters separated by
17030: # semicolons. Parameter meanings for most parametrized sequences are
17031: # decribed in the notes.
17032: #
17033: # Sequence Sequence Parameter or
17034: # Mnemonic Name Sequence Value Mode terminfo
17035: # -----------------------------------------------------------------------------
17036: # APC Applicatn Program Command \E _ - Delim -
17037: # BEL Bell * ^G - - bel
17038: # BPH Break Permitted Here * \E B - * -
17039: # BS Backpace * ^H - EF -
17040: # CAN Cancel * ^X - - - (A)
17041: # CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt
17042: # CCH Cancel Previous Character \E T - - -
17043: # CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B)
17044: # CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C)
17045: # CMD Coding Method Delimiter * \E
17046: # CNL Cursor Next Line \E [ Pn E 1 eF nel (D)
17047: # CPL Cursor Preceding Line \E [ Pn F 1 eF -
17048: # CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E)
17049: # CSI Control Sequence Intro \E [ - Intro -
17050: # CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F)
17051: # CUB Cursor Backward \E [ Pn D 1 eF cub
17052: # CUD Cursor Down \E [ Pn B 1 eF cud
17053: # CUF Cursor Forward \E [ Pn C 1 eF cuf
17054: # CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G)
17055: # CUU Cursor Up \E [ Pn A 1 eF cuu
17056: # CVT Cursor Vertical Tab \E [ Pn Y - eF - (H)
17057: # DA Device Attributes \E [ Pn c 0 - -
17058: # DAQ Define Area Qualification \E [ Ps o 0 - -
17059: # DCH Delete Character \E [ Pn P 1 eF dch
17060: # DCS Device Control String \E P - Delim -
17061: # DL Delete Line \E [ Pn M 1 eF dl
17062: # DLE Data Link Escape * ^P - - -
17063: # DMI Disable Manual Input \E \ - Fs -
17064: # DSR Device Status Report \E [ Ps n 0 - - (I)
17065: # DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC -
17066: # EA Erase in Area \E [ Ps O 0 eF - (J)
17067: # ECH Erase Character \E [ Pn X 1 eF ech
17068: # ED Erase in Display \E [ Ps J 0 eF ed (J)
17069: # EF Erase in Field \E [ Ps N 0 eF -
17070: # EL Erase in Line \E [ Ps K 0 eF el (J)
17071: # EM End of Medium * ^Y - - -
17072: # EMI Enable Manual Input \E b Fs -
17073: # ENQ Enquire ^E - - -
17074: # EOT End Of Transmission ^D - * -
17075: # EPA End of Protected Area \E W - - - (K)
17076: # ESA End of Selected Area \E G - - -
17077: # ESC Escape ^[ - - -
17078: # ETB End Transmission Block ^W - - -
17079: # ETX End of Text ^C - - -
17080: # FF Form Feed ^L - - -
17081: # FNK Function Key * \E [ Pn SPC W - - -
17082: # GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - -
17083: # FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE -
17084: # GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L)
17085: # GSS Graphic Size Selection \E [ Pn SPC C none FE -
17086: # HPA Horz Position Absolute \E [ Pn ` 1 FE - (B)
17087: # HPB Char Position Backward \E [ j 1 FE -
17088: # HPR Horz Position Relative \E [ Pn a 1 FE - (M)
17089: # HT Horizontal Tab * ^I - FE - (N)
17090: # HTJ Horz Tab w/Justification \E I - FE -
17091: # HTS Horizontal Tab Set \E H - FE hts
17092: # HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G)
17093: # ICH Insert Character \E [ Pn @ 1 eF ich
17094: # IDCS ID Device Control String \E [ SPC O - * -
17095: # IGS ID Graphic Subrepertoire \E [ SPC M - * -
17096: # IL Insert Line \E [ Pn L 1 eF il
17097: # IND Index \E D - FE -
17098: # INT Interrupt \E a - Fs -
17099: # JFY Justify \E [ Ps SPC F 0 FE -
17100: # IS1 Info Separator #1 * ^_ - * -
17101: # IS2 Info Separator #1 * ^^ - * -
17102: # IS3 Info Separator #1 * ^] - * -
17103: # IS4 Info Separator #1 * ^\ - * -
17104: # LF Line Feed ^J - - -
17105: # LS1R Locking Shift Right 1 * \E ~ - - -
17106: # LS2 Locking Shift 2 * \E n - - -
17107: # LS2R Locking Shift Right 2 * \E } - - -
17108: # LS3 Locking Shift 3 * \E o - - -
17109: # LS3R Locking Shift Right 3 * \E | - - -
17110: # MC Media Copy \E [ Ps i 0 - - (S)
17111: # MW Message Waiting \E U - - -
17112: # NAK Negative Acknowledge * ^U - * -
17113: # NBH No Break Here * \E C - - -
17114: # NEL Next Line \E E - FE nel (D)
17115: # NP Next Page \E [ Pn U 1 eF -
17116: # NUL Null * ^@ - - -
17117: # OSC Operating System Command \E ] - Delim -
17118: # PEC Pres. Expand/Contract * \E Pn SPC Z 0 - -
17119: # PFS Page Format Selection * \E Pn SPC J 0 - -
17120: # PLD Partial Line Down \E K - FE - (T)
17121: # PLU Partial Line Up \E L - FE - (U)
17122: # PM Privacy Message \E ^ - Delim -
17123: # PP Preceding Page \E [ Pn V 1 eF -
17124: # PPA Page Position Absolute * \E [ Pn SPC P 1 FE -
17125: # PPB Page Position Backward * \E [ Pn SPC R 1 FE -
17126: # PPR Page Position Forward * \E [ Pn SPC Q 1 FE -
17127: # PTX Parallel Texts * \E [ \ - - -
17128: # PU1 Private Use 1 \E Q - - -
17129: # PU2 Private Use 2 \E R - - -
17130: # QUAD Typographic Quadding \E [ Ps SPC H 0 FE -
17131: # REP Repeat Char or Control \E [ Pn b 1 - rep
17132: # RI Reverse Index \E M - FE - (V)
17133: # RIS Reset to Initial State \E c - Fs -
17134: # RM Reset Mode * \E [ Ps l - - - (W)
17135: # SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - -
17136: # SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X)
17137: # SCI Single-Char Introducer \E Z - - -
17138: # SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - -
17139: # SCS Set Char. Spacing * \E [ Pn SPC g - - -
17140: # SD Scroll Down \E [ Pn T 1 eF rin
17141: # SDS Start Directed String * \E [ Pn ] 1 - -
17142: # SEE Select Editing Extent \E [ Ps Q 0 - - (Y)
17143: # SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - -
17144: # SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O)
17145: # SHS Select Char. Spacing * \E [ Ps SPC K 0 - -
17146: # SI Shift In ^O - - - (P)
17147: # SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - -
17148: # SL Scroll Left \E [ Pn SPC @ 1 eF -
17149: # SLH Set Line Home * \E [ Pn SPC U - - -
17150: # SLL Set Line Limit * \E [ Pn SPC V - - -
17151: # SLS Set Line Spacing * \E [ Pn SPC h - - -
17152: # SM Select Mode \E [ Ps h none - - (W)
17153: # SO Shift Out ^N - - - (Q)
17154: # SOH Start Of Heading * ^A - - -
17155: # SOS Start of String * \E X - - -
17156: # SPA Start of Protected Area \E V - - - (Z)
17157: # SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - -
17158: # SPH Set Page Home * \E [ Ps SPC G - - -
17159: # SPI Spacing Increment \E [ Pn ; Pn SPC G none FE -
17160: # SPL Set Page Limit * \E [ Ps SPC j - - -
17161: # SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - -
17162: # SR Scroll Right \E [ Pn SPC A 1 eF -
17163: # SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - -
17164: # SRS Start Reversed String * \E [ Ps [ 0 - -
17165: # SSA Start of Selected Area \E F - - -
17166: # SSU Select Size Unit * \E [ Pn SPC I 0 - -
17167: # SSW Set Space Width * \E [ Pn SPC [ none - -
17168: # SS2 Single Shift 2 (G2 set) \E N - Intro -
17169: # SS3 Single Shift 3 (G3 set) \E O - Intro -
17170: # ST String Terminator \E \ - Delim -
17171: # STAB Selective Tabulation * \E [ Pn SPC ^ - - -
17172: # STS Set Transmit State \E S - - -
17173: # STX Start pf Text * ^B - - -
17174: # SU Scroll Up \E [ Pn S 1 eF indn
17175: # SUB Substitute * ^Z - - -
17176: # SVS Select Line Spacing * \E [ Pn SPC \ 1 - -
17177: # SYN Synchronous Idle * ^F - - -
17178: # TAC Tabul. Aligned Centered * \E [ Pn SPC b - - -
17179: # TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - -
17180: # TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - -
17181: # TBC Tab Clear \E [ Ps g 0 FE tbc
17182: # TCC Tabul. Centered on Char * \E [ Pn SPC c - - -
17183: # TSR Tabulation Stop Remove * \E [ Pn SPC d - FE -
17184: # TSS Thin Space Specification \E [ Pn SC E none FE -
17185: # VPA Vert. Position Absolute \E [ Pn d 1 FE vpa
17186: # VPB Line Position Backward * \E [ Pn k 1 FE -
17187: # VPR Vert. Position Relative \E [ Pn e 1 FE - (R)
17188: # VT Vertical Tabulation * ^K - FE -
17189: # VTS Vertical Tabulation Set \E J - FE -
17190: #
17191: # ---------------------------------------------------------------------------
17192: #
17193: # Notes:
17194: #
17195: # Some control characters are listed in the ECMA-48 standard without
17196: # being assigned functions relevant to terminal control there (they
17197: # referred to other standards such as ISO 1745 or ECMA-35). They are listed
17198: # here anyway for completeness.
17199: #
17200: # (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation.
17201: #
17202: # (B) There seems to be some confusion abroad between CHA and HPA. Most
17203: # `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls
17204: # the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but
17205: # preserved the CHA abbreviation.
17206: #
17207: # (C) CHT corresponds to terminfo (tab). Usually it has the value ^I.
17208: # Occasionally (as on, for example, certain HP terminals) this has the HTJ
17209: # value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the
17210: # CHT abbreviation.
17211: #
17212: # (D) terminfo (nel) is usually \r\n rather than ANSI \EE.
17213: #
17214: # (E) ECMA-48 calls this "Active Position Report" but preserves the CPR
17215: # abbreviation.
17216: #
17217: # (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear
17218: # char tab, 3 = clear line tab, 4 = clear all char tabs on current line,
17219: # 5 = clear all char tabs, 6 = clear all line tabs.
17220: #
17221: # (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept
17222: # HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character
17223: # Position Absolute" but retains the HVP abbreviation.
17224: #
17225: # (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT
17226: # abbreviation.
17227: #
17228: # (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR
17229: # later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request
17230: # DSR, 6 = request CPR response.
17231: #
17232: # (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end,
17233: # 1 = clear from beginning, 2 = clear.
17234: #
17235: # (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation.
17236: #
17237: # (L) The GSM parameters are vertical and horizontal parameters to scale by.
17238: #
17239: # (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals
17240: # use CUF for this function and ignore HPR. ECMA-48 calls this "Character
17241: # Position Relative" but retains the HPR abbreviation.
17242: #
17243: # (N) ECMA-48 calls this "Character Tabulation" but retains the HT
17244: # abbreviation.
17245: #
17246: # (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold,
17247: # 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink,
17248: # 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion),
17249: # 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur,
17250: # 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4,
17251: # 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off
17252: # 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow
17253: # fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set
17254: # fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg
17255: # 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg,
17256: # 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set
17257: # default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 =
17258: # overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved,
17259: # 61-65 = variable highlights for ideograms.
17260: #
17261: # (P) SI is also called LSO, Locking Shift Zero.
17262: #
17263: # (Q) SI is also called LS1, Locking Shift One.
17264: #
17265: # (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals
17266: # use CUD for this function and ignore VPR. ECMA calls it `Line Position
17267: # Absolute' but retains the VPA abbreviation.
17268: #
17269: # (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from
17270: # primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer
17271: # from secondary aux device, 4 = stop relay to primary aux device, 5 =
17272: # start relay to primary aux device, 6 = stop relay to secondary aux device,
17273: # 7 = start relay to secondary aux device.
17274: #
17275: # (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD
17276: # abbreviation.
17277: #
17278: # (U) ECMA-48 calls this "Partial Line Backward" but retains the PLD
17279: # abbreviation.
17280: #
17281: # (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation.
17282: #
17283: # (W) RM/SM modes are as follows: 1 = Guarder Area Transfer Mode (GATM),
17284: # 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM),
17285: # 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM),
17286: # 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional
17287: # Support Mode (BDSM), 9 = Device Component Select Mode (DCSM),
17288: # 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM),
17289: # 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM),
17290: # 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer
17291: # Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer
17292: # Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed
17293: # New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 =
17294: # Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed
17295: # from ECMA-48's 5th edition but are listed here for reference.
17296: #
17297: # (X) Select Alternate Presentation Variants is used only for non-Latin
17298: # alphabets.
17299: #
17300: # (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM).
17301: #
17302: # (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA
17303: # abbreviation.
17304: #
17305: # ---------------------------------------------------------------------------
17306: #
17307: # Abbreviations:
17308: #
17309: # Intro an Introducer of some kind of defined sequence; the normal 7-bit
17310: # X3.64 Control Sequence Introducer is the two characters "Escape ["
17311: #
17312: # Delim a Delimiter
17313: #
17314: # x/y identifies a character by position in the ASCII table (column/row)
17315: #
17316: # eF editor function (see explanation)
17317: #
17318: # FE format effector (see explanation)
17319: #
17320: # F is a Final character in
17321: # an Escape sequence (F from 3/0 to 7/14 in the ASCII table)
17322: # a control sequence (F from 4/0 to 7/14)
17323: #
17324: # Gs is a graphic character appearing in strings (Gs ranges from
17325: # 2/0 to 7/14) in the ASCII table
17326: #
17327: # Ce is a control represented as a single bit combination in the C1 set
17328: # of controls in an 8-bit character set
17329: #
17330: # C0 the familiar set of 7-bit ASCII control characters
17331: #
17332: # C1 roughly, the set of control chars available only in 8-bit systems.
17333: # This is too complicated to explain fully here, so read Jim Fleming's
17334: # article in the February 1983 BYTE, especially pages 214 through 224.
17335: #
17336: # Fe is a Final character of a 2-character Escape sequence that has an
17337: # equivalent representation in an 8-bit environment as a Ce-type
17338: # (Fe ranges from 4/0 to 5/15)
17339: #
17340: # Fs is a Final character of a 2-character Escape sequence that is
17341: # standardized internationally with identical representation in 7-bit
17342: # and 8-bit environments and is independent of the currently
17343: # designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14)
17344: #
17345: # I is an Intermediate character from 2/0 to 2/15 (inclusive) in the
17346: # ASCII table
17347: #
17348: # P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII
17349: # table
17350: #
17351: # Pn is a numeric parameter in a control sequence, a string of zero or
17352: # more characters ranging from 3/0 to 3/9 in the ASCII table
17353: #
17354: # Ps is a variable number of selective parameters in a control sequence
17355: # with each selective parameter separated from the other by the code
17356: # 3/11 (which usually represents a semicolon); Ps ranges from
17357: # 3/0 to 3/9 and includes 3/11
17358: #
17359: # * Not relevant to terminal control, listed for completeness only.
17360: #
17361: # Format Effectors versus Editor Functions
17362: #
17363: # A format effector specifies how following output is to be displayed.
17364: # An editor function allows you to modify the display. Informally
17365: # format effectors may be destructive; format effectors should not be.
17366: #
17367: # For instance, a format effector that moves the "active position" (the
17368: # cursor or equivalent) one space to the left would be useful when you want to
17369: # create an overstrike, a compound character made of two standard characters
17370: # overlaid. Control-H, the Backspace character, is actually supposed to be a
17371: # format effector, so you can do this. But many systems use it in a
17372: # nonstandard fashion, as an editor function, deleting the character to the
17373: # left of the cursor and moving the cursor left. When Control-H is assumed to
17374: # be an editor function, you cannot predict whether its use will create an
17375: # overstrike unless you also know whether the output device is in an "insert
17376: # mode" or an "overwrite mode". When Control-H is used as a format effector,
17377: # its effect can always be predicted. The familiar characters carriage
17378: # return, linefeed, formfeed, etc., are defined as format effectors.
17379: #
17380: # NOTES ON THE DEC VT100 IMPLEMENTATION
17381: #
17382: # Control sequences implemented in the VT100 are as follows:
17383: #
17384: # CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND,
17385: # LNM, NEL, RI, RIS, RM, SGR, SM, TBC
17386: #
17387: # plus several private DEC commands.
17388: #
17389: # Erasing parts of the display (EL and ED) in the VT100 is performed thus:
17390: #
17391: # Erase from cursor to end of line Esc [ 0 K or Esc [ K
17392: # Erase from beginning of line to cursor Esc [ 1 K
17393: # Erase line containing cursor Esc [ 2 K
17394: # Erase from cursor to end of screen Esc [ 0 J or Esc [ J
17395: # Erase from beginning of screen to cursor Esc [ 1 J
17396: # Erase entire screen Esc [ 2 J
17397: #
17398: # Some brain-damaged terminal/emulators respond to Esc [ J as if it were
17399: # Esc [ 2 J, but this is wrong; the default is 0.
17400: #
17401: # The VT100 responds to receiving the DA (Device Attributes) control
17402: #
17403: # Esc [ c (or Esc [ 0 c)
17404: #
17405: # by transmitting the sequence
17406: #
17407: # Esc [ ? l ; Ps c
17408: #
17409: # where Ps is a character that describes installed options.
17410: #
17411: # The VT100's cursor location can be read with the DSR (Device Status
17412: # Report) control
17413: #
17414: # Esc [ 6 n
17415: #
17416: # The VT100 reports by transmitting the CPR sequence
17417: #
17418: # Esc [ Pl ; Pc R
17419: #
17420: # where Pl is the line number and Pc is the column number (in decimal).
17421: #
17422: # The specification for the DEC VT100 is document EK-VT100-UG-003.
17423:
17424: #### ANSI.SYS
17425: #
17426: # Here is a description of the color and attribute controls supported in the
17427: # the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI
17428: # terminal emulators for Intel boxes obey these. They are a proper subset
17429: # of the ECMA-48 escapes.
17430: #
17431: # 0 all attributes off
17432: # 1 foreground bright
17433: # 4 underscore on
17434: # 5 blink on/background bright (not reliable with brown)
17435: # 7 reverse-video
17436: # 8 set blank (non-display)
17437: # 10 set primary font
17438: # 11 set first alternate font (on PCs, display ROM characters 1-31)
17439: # 12 set second alternate font (on PCs, display IBM high-half chars)
17440: #
17441: # Color attribute sets
17442: # 3n set foreground color / 0=black, 1=red, 2=green, 3=brown,
17443: # 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white
17444: # Bright black becomes gray. Bright brown becomes yellow,
17445: # These coincide with the prescriptions of the ISO 6429/ECMA-48 standard.
17446: #
17447: # * If the 5 attribute is on and you set a background color (40-47) it is
17448: # supposed to enable bright background.
17449: #
17450: # * Many VGA cards (such as the Paradise and compatibles) do the wrong thing
17451: # when you try to set a "bright brown" (yellow) background with attribute
17452: # 5 (you get a blinking yellow foreground instead). A few displays
17453: # (including the System V console) support an attribute 6 that undoes this
17454: # braindamage (this is required by iBCS2).
17455: #
17456: # * Some older versions of ANSI.SYS have a bug that causes thems to require
17457: # ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48
17458: # compatible.)
17459:
17460: #### Intel Binary Compatibility Standard
17461: #
17462: # For comparison, here are the capabilities implied by the Intel Binary
17463: # Compatibility Standard for UNIX systems (Intel order number 468366-001).
17464: # These recommendations are optional. IBCS2 allows the leading escape to
17465: # be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with
17466: # the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities
17467: # (as described in figure 9-3 of the standard). Those expressed in the ibcs2
17468: # terminfo entry are followed with the corresponding capability in parens:
17469: #
17470: # CSI <n>k disable (n=0) or enable (n=1) keyclick
17471: # CSI 2h lock keyboard
17472: # CSI 2i send screen as input
17473: # CSI 2l unlock keyboard
17474: # CSI 6m enable background color intensity
17475: # CSI <0-2>c reserved
17476: # CSI <0-59>m select graphic rendition
17477: # CSI <n>;<m>H (cup) cursor to line n and column m
17478: # CSI <n>;<m>f cursor to line n and column m
17479: # CSI <n>@ (ich) insert characters
17480: # CSI <n>A (cuu) cursor up n lines
17481: # CSI <n>B (cud) cursor down n lines
17482: # CSI <n>C (cuu) cursor right n characters
17483: # CSI <n>D (cud) cursor left n characters
17484: # CSI <n>E cursor down n lines and in first column
17485: # CSI <n>F cursor up n lines and in first column
17486: # CSI <n>G (hpa) position cursor at column n-1
17487: # CSI <n>J (ed) erase in display
17488: # CSI <n>K (el) erase in line
17489: # CSI <n>L (il) insert line(s)
17490: # CSI <n>P (dch) delete characters
17491: # CSI <n>S (indn) scroll up n lines
17492: # CSI <n>T (rin) scroll down n lines
17493: # CSI <n>X (ech) erase characters
17494: # CSI <n>Z (cbt) back up n tab stops
17495: # CSI <n>` cursor to column n on line
17496: # CSI <n>a (cuu) cursor right n characters
17497: # CSI <n>d (vpa) cursor to line n
17498: # CSI <n>e cursor down n lines and in first column
17499: # CSI <n>g (cbt) clear all tabs
17500: # CSI <n>z make virtual terminal n active
17501: # CSI ?7h (smam) turn automargin on
17502: # CSI ?7l (rmam) turn automargin off
17503: # CSI s save cursor position
17504: # CSI u restore cursor position to saved value
17505: # CSI =<c>A set overscan color
17506: # CSI =<c>F set normal foreground color
17507: # CSI =<c>G set normal background color
17508: # CSI =<c>H set reverse foreground color
17509: # CSI =<c>I set reverse foreground color
17510: # CSI =<c>J set graphic foreground color
17511: # CSI =<c>K set graphic foreground color
17512: # CSI =<n>g (dispc) display n from alternate graphics character set
17513: # CSI =<p>;<d>B set bell parameters
17514: # CSI =<s>;<e>C set cursor parameters
17515: # CSI =<x>D enable/disable intensity of background color
17516: # CSI =<x>E set/clear blink vs. bold background
17517: # CSI 7 (sc) (sc) save cursor position
17518: # CSI 8 (rc) (rc) restore cursor position to saved value
17519: # CSI H (hts) (hts) set tab stop
17520: # CSI Q<n><string> define function key string
17521: # (string must begin and end with delimiter char)
17522: # CSI c (clear) clear screen
17523: #
17524: # The lack of any specification for attributes in SGR (among other things)
17525: # makes this a wretchedly weak standard. The table above is literally
17526: # everything iBSC2 has to say about terminal escape sequences; there is
17527: # no further discussion of their meaning or how to set the parameters
17528: # in these sequences at all.
17529: #
17530:
17531: ######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE
17532: #
17533: # The historical termcap file entries were written primarily in 4.4BSD termcap.
17534: # The 4.4BSD termcap set was substantially larger than the original 4.1BSD set,
17535: # with the extension names chosen for compatibility with the termcap names
17536: # assigned in System V terminfo. There are some variant extension sets out
17537: # there. We try to describe them here.
17538: #
17539: # XENIX extensions:
17540: #
17541: # The XENIX extensions include a set of function-key capabilities as follows:
17542: #
17543: # code XENIX variable name terminfo name name clashes?
17544: # ---- ------------------- ------------- -----------------------
17545: # CL key_char_left
17546: # CR key_char_right
17547: # CW key_change_window create_window
17548: # EN key_end kend
17549: # HM key_home khome
17550: # HP ??
17551: # LD key_delete_line kdl1
17552: # LF key_linefeed label_off
17553: # NU key_next_unlocked_cell
17554: # PD key_page_down knp
17555: # PL ??
17556: # PN start_print mc5
17557: # PR ??
17558: # PS stop_print mc4
17559: # PU key_page_up kpp pulse
17560: # RC key_recalc remove_clock
17561: # RF key_toggle_ref req_for_input
17562: # RT key_return kent
17563: # UP key_up_arrow kcuu1 parm_up_cursor
17564: # WL key_word_left
17565: # WR key_word_right
17566: #
17567: # The XENIX extensions also include the following character-set and highlight
17568: # capabilities:
17569: #
17570: # XENIX terminfo function
17571: # ----- -------- ------------------------------
17572: # GS smacs start alternate character set
17573: # GE rmacs end alternate character set
17574: # GG :as:/:ae: glitch (analogous to :sg:/:ug:)
17575: # bo blink begin blink (not used in /etc/termcap)
17576: # be end blink (not used in /etc/termcap)
17577: # bb blink glitch (not used in /etc/termcap)
17578: # it dim begin dim (not used in /etc/termcap)
17579: # ie end dim (not used in /etc/termcap)
17580: # ig dim glitch (not used in /etc/termcap)
17581: #
17582: # Finally, XENIX also used the following forms-drawing capabilities:
17583: #
17584: # single double type ASCII approximation
17585: # ------ ------ ------------- -------------------
17586: # GV Gv vertical line |
17587: # GH Gv horizontal line - _
17588: # G1 G5 top right corner _ |
17589: # G2 G6 top left corner |
17590: # G3 G7 bottom left corner |_
17591: # G4 G8 bottom right corner _|
17592: # GD Gd down-tick character T
17593: # GL Gl left-tick character -|
17594: # GR Gr right-tick character |-
17595: # GC Gc middle intersection -|-
17596: # GU Gu up-tick character _|_
17597: #
17598: # These were invented to take advantage of the IBM PC ROM character set. One
17599: # can compose an acsc string from the single-width characters as follows
17600: # "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}"
17601: # When translating a termcap file, ncurses tic will do this automatically.
17602: # The double forms characters don't fit the SVr4 terminfo model.
17603: #
17604: # AT&T Extensions:
17605: #
17606: # The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of
17607: # nonstandard capabilities. Its signature is the KM capability, used to name
17608: # some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this
17609: # set. Comments in the original, and a little cross-checking with other AT&T
17610: # documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh:
17611: # (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights),
17612: # FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make
17613: # cursor invisible), and CV=:ve: (make cursor normal).
17614: #
17615: # HP Extensions
17616: #
17617: # The HP library (as of mid-1995, their term.h file version 70.1) appears to
17618: # have the System V capabilities up to SVr1 level. After that, it supports
17619: # two nonstandard caps meml and memu corresponding to the old termcap :ml:,
17620: # :mu: capabilities. After that, it supports caps plab_norm, label_on,
17621: # label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the
17622: # HP binary format incompatible with SVr4's.
17623: #
17624: # IBM Extensions
17625: #
17626: # There is a set of nonstandard terminfos used by IBM's AIX operating system.
17627: # The AIX terminfo library diverged from SVr1 terminfo, and replaces all
17628: # capabilities following prtr_non with the following special capabilties:
17629: # box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab,
17630: # kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr,
17631: # ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml,
17632: # rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents:
17633: # kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be
17634: # renamed (to kcbt and kslt). The places in the box[12] capabilities
17635: # correspond to acsc chars, here is the mapping:
17636: #
17637: # box1[0] = ACS_ULCORNER
17638: # box1[1] = ACS_HLINE
17639: # box1[2] = ACS_URCORNER
17640: # box1[3] = ACS_VLINE
17641: # box1[4] = ACS_LRCORNER
17642: # box1[5] = ACS_LLCORNER
17643: # box1[6] = ACS_TTEE
17644: # box1[7] = ACS_RTEE
17645: # box1[8] = ACS_BTEE
17646: # box1[9] = ACS_LTEE
17647: # box1[10] = ACS_PLUS
17648: #
17649: # The box2 characters are the double-line versions of these forms graphics.
17650: # The AIX binary terminfo format is incompatible with SVr4's.
17651: #
17652: # Iris console extensions:
17653: #
17654: # HS is half-intensity start; HE is half-intensity end
17655: # CT is color terminal type (for Curses & rogue)
17656: # CP is color change escape sequence
17657: # CZ are color names (for Curses & rogue)
17658: #
17659: # The ncurses tic utility recognizes HS as an alias for mh <dim>.
17660: #
17661: # TC Extensions:
17662: #
17663: # There is a set of extended termcaps associated with something
17664: # called the "Terminal Control" or TC package created by MainStream Systems,
17665: # Winfield Kansas. This one also uses GS/GE for as/ae, and also uses
17666: # CF for civis and CO for cvvis. Finally, they define a boolean :ct:
17667: # that flags color terminals.
17668: #
17669: ######## CHANGE HISTORY
17670: #
17671: # The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94.
17672: # Releases 9 and up are maintained by Eric S. Raymond as part of the ncurses
17673: # project.
17674: #
17675: # This file contains all the capability information present in John Kunze's
17676: # last version of the termcap master file, except as noted in the change
17677: # comments at end of file. Some information about very ancient obsolete
17678: # capabilities has been moved to comments. Some all-numeric names of older
17679: # terminals have been retired.
17680: #
17681: # I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some
17682: # capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer
17683: # used by BSD curses.
17684: #
17685: # The 9.1.0 version of this file was translated from my lightly-edited copy of
17686: # 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for
17687: # the purpose. Unless the ncurses tic implementation and the Lisp code were
17688: # making perfectly synchronized mistakes which I then failed to catch by
17689: # eyeball, the translation was correct and perfectly information-preserving.
17690: #
17691: # Major version number bumps correspond to major version changes in ncurses.
17692: #
17693: # Here is a log of the changes since then:
17694: #
17695: # 9.1.0 (Wed Feb 1 04:50:32 EST 1995):
17696: # * First terminfo master translated from 8.3.
17697: # 9.2.0 (Wed Feb 1 12:21:45 EST 1995):
17698: # * Replaced Wyse entries with updated entries supplied by vendor.
17699: #
17700: # 9.3.0 (Mon Feb 6 19:14:40 EST 1995):
17701: # * Added contact & status info from G. Clark Brown <clark@sssi.com>.
17702: # 9.3.1 (Tue Feb 7 12:00:24 EST 1995):
17703: # * Better XENIX keycap translation. Describe TC termcaps.
17704: # * Contact and history info supplied by Qume.
17705: # 9.3.2 (Sat Feb 11 23:40:02 EST 1995):
17706: # * Raided the Shuford FTP site for recent termcaps/terminfos.
17707: # * Added information on X3.64 and VT100 standard escape sequences.
17708: # 9.3.3 (Mon Feb 13 12:26:15 EST 1995):
17709: # * Added a correct X11R6 xterm entry.
17710: # * Fixed terminfo translations of padding.
17711: # 9.3.4 (Wed Feb 22 19:27:34 EST 1995):
17712: # * Added correct acsc/smacs/rmacs strings for vt100 and xterm.
17713: # * Added u6/u7/u8/u9 capabilities.
17714: # * Added PCVT entry.
17715: # 9.3.5 (Thu Feb 23 09:37:12 EST 1995):
17716: # * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry
17717: # to use reverse-video standout so Emacs will look right.
17718: # * Added el1 capability to ansi.
17719: # * Added smacs/rmacs to ansi.sys.
17720: #
17721: # 9.4.0 (Sat Feb 25 16:43:25 EST 1995):
17722: # * New mt70 entry.
17723: # * Added COPYRIGHTS AND OTHER DELUSIONS.
17724: # * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics
17725: # smartvid & smarterm, ampex 175 & 219 & 232,
17726: # env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20,
17727: # ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2,
17728: # screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan,
17729: # adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500.
17730: # * Replaced the Perkin-Elmer entries with vendor's official ones.
17731: # * Restored the old minimal-ansi entry, luna needs it.
17732: # * Fixed some incorrect ip and proportional-padding translations.
17733: # 9.4.1 (Mon Feb 27 14:18:33 EST 1995):
17734: # * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly.
17735: # * Make the xterm entry 65 lines again; create xterm25 and xterm24
17736: # to force a particular height.
17737: # * Added beehive4 and reorganized other Harris entries.
17738: # 9.4.2 (Thu Mar 9 01:45:44 EST 1995):
17739: # * Merged in DEC's official entries for its terminals. The only old
17740: # entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo).
17741: # * Replaced the translated BBN Bitgraph entries with purpose-built
17742: # ones from AT&T's SVr3.
17743: # * Replaced the AT&T entries with AT&T's official terminfos.
17744: # * Added teleray 16, vc415, cops10.
17745: # * Merged in many individual capabilities from SCO terminfo files.
17746: # 9.4.3 (Mon Mar 13 02:37:53 EST 1995):
17747: # * Typo fixes.
17748: # * Change linux entry so A_PROTECT enables IBM-PC ROM characters.
17749: # 9.4.4 (Mon Mar 27 12:32:35 EST 1995):
17750: # * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803,
17751: # pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21,
17752: # simterm, citoh and variants.
17753: # * Replaced sol entry with sol1 and sol2.
17754: # * Replaced Qume QVT and Freedom-series entries with purpose-built
17755: # terminfo entries.
17756: # * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek
17757: # and dg200 entries using caps from from SCO.
17758: # * Added the usual set of function-key mappings to ANSI entry.
17759: # * Corrected xterm's function-key capabilities.
17760: # 9.4.5 (Tue Mar 28 14:27:49 EST 1995):
17761: # * Fix in xterm entry, cub and cud are not reliable under X11R6.
17762: # 9.4.6 (Thu Mar 30 14:52:15 EST 1995):
17763: # * Fix in xterm entry, get the arrow keys right.
17764: # * Change some \0 escapes to \200.
17765: # 9.4.7 (Tue Apr 4 11:27:11 EDT 1995)
17766: # * Added apple (Videx card), adm1a, oadm31.
17767: # * Fixed malformed ampex csr.
17768: # * Fixed act4, cyb110; they had old-style prefix padding left in.
17769: # * Changed mandatory to advisory padding in many entries.
17770: # * Replaced HP entries up to hpsub with purpose-built ones.
17771: # * Blank rmir/smir/rmdc/smdc capabilities removed.
17772: # * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924.
17773: # 9.4.8 (Fri Apr 7 09:36:34 EDT 199):
17774: # * Replaced the Ann Arbor entries with SCO's, the init strings are
17775: # more efficient (but the entries otherwise identical).
17776: # * Added dg211 from Shuford archive.
17777: # * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk,
17778: # adm42-nl, pc52, gs6300, xerox820, uts30.
17779: # * Pull SCO's padding into vi200 entry.
17780: # * Improved capabilities for tvi4107 and other Televideo and Viewpoint
17781: # entries merged in from SCO's descriptions.
17782: # * Fixed old-style prefix padding on zen50, h1500.
17783: # * Moved old superbee entry to superbee-xsb, pulled in new superbee
17784: # entry from SCO's description.
17785: # * Reorganized the special entries.
17786: # * Added lm#0 to cbunix and virtual entries.
17787: #
17788: # 9.5.0 (Mon Apr 10 11:30:00 EDT 1995):
17789: # * Restored cdc456tst.
17790: # * Fixed sb1 entry, SCO erroneously left out the xsb glitch.
17791: # * Added megatek, beacon, microkit.
17792: # * Freeze for ncurses-1.9 release.
17793: # 9.5.1 (Fri Apr 21 12:46:42 EDT 1995):
17794: # * Added historical data for TAB.
17795: # * Comment fixes from David MacKenzie.
17796: # * Added the new BSDI pc3 entry.
17797: # 9.5.2 (Tue Apr 25 17:27:52 EDT 1995)
17798: # * A change in the tic -C logic now ensures that all entries in
17799: # the termcap translation will fit in < 1024 bytes.
17800: # * Added `bobcat' and `gator' HP consoles and the Nu machine entries
17801: # from GNU termcap file. This merges in all their local information.
17802: # 9.5.3 (Tue Apr 25 22:28:13 EDT 1995)
17803: # * Changed tic -C logic to dump all capabilities used by GNU termcap.
17804: # * Added warnings about entries with long translations (restoring
17805: # all the GNU termcaps pushes a few over the edge).
17806: # 9.5.4 (Wed Apr 26 15:35:09 EDT 1995)
17807: # * Yet another tic change, and a couple of entry tweaks, to reduce the
17808: # number of long (> 1024) termcap translations back to 0.
17809: #
17810: # 9.6.0 (Mon May 1 10:35:54 EDT 1995)
17811: # * Added kf13-kf20 to Linux entry.
17812: # * Regularize Prime terminal names.
17813: # * Historical data on Synertek.
17814: # * Freeze for ncurses-1.9.1.
17815: # 9.6.1 (Sat May 6 02:00:52 EDT 1995):
17816: # * Added true xterm-color entry, renamed djm's pseudo-color entry.
17817: # * Eliminate whitespace in short name fields, this tanks some scripts.
17818: # * Name field changes to shorten some long entries.
17819: # * Termcap translation now automatically generates empty rmir/smir
17820: # when ich1/ich is present (copes with an ancient vi bug).
17821: # * Added `screen' entries from FSF's screen-3.6.2.
17822: # * Added linux-nic and xterm-nic entries.
17823: # 9.6.2 (Sat May 6 17:00:55 EDT 1995):
17824: # * Change linux entry to use smacs=\E[11m and have an explicit acsc,
17825: # eliminating some special-case code in ncurses.
17826: #
17827: # 9.7.0 (Tue May 9 18:03:12 EDT 1995):
17828: # * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think
17829: # that captures everything unique from it.
17830: # * Added reorder script generator.
17831: # * Freeze for ncurses 1.9.2 release.
17832: # 9.7.1 (Thu Jun 29 09:35:22 EDT 1995):
17833: # * Added Sean Farley's kspd, flash, rs1 capabilities for linux.
17834: # * Added Olaf Siebert's corrections for adm12.
17835: # * ansi-pc-color now includes the colors and pairs caps, so that
17836: # entries which use it will inherit them automatically.
17837: # * The linux entry can now recognize the center (keypad 5) key.
17838: # * Removed some junk that found its way into Linux acsc.
17839: #
17840: # 9.8.0 (Fri Jul 7 04:46:57 EDT 1995):
17841: # * Add 50% cut mark as a desperate hack to reduce tic's core usage.
17842: # * xterm doesn't try to use application keypad mode any more.
17843: # * Freeze for ncurses-1.9.3 release.
17844: # 9.8.1 (Thu Jul 19 17:02:12 EDT 1995):
17845: # * Added corrected sun entry from vendor.
17846: # * Added csr capability to linux entry.
17847: # * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG.
17848: # * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators.
17849: # * Some commented-out caps in long entries come back in, my code
17850: # for computing string-table lengths had a bug in it.
17851: # * pcansi series modified to fit comm-program reality better.
17852: # 9.8.2 (Sat Sep 9 23:35:00 EDT 1995):
17853: # * BSD/OS actually ships the ibmpc3 bold entry as its console.
17854: # * Correct some bad aliases in the pcansi series
17855: # * Added entry for QNX console.
17856: # * Clean up duplicate long names for use with 4.4 library.
17857: # * Change vt100 standout to be normal reverse vide, not bright reverse;
17858: # this makes the Emacs status line look better.
17859: # 9.8.3 (Sun Sep 10 13:07:34 EDT 1995):
17860: # * Added Adam Thompson's VT320 entries, also his dtx-sas and z340.
17861: # * Minor surgery, mostly on name strings, to shorten termcap version.
17862: #
17863: # 9.9.0 (Sat Sep 16 23:03:48 EDT 1995):
17864: # * Added dec-vt100 for use with the EWAN emulator.
17865: # * Added kmous to xterm for use with xterm's mouse-tracking facility.
17866: # * Freeze for 1.9.5 alpha release.
17867: # 9.9.1 (Wed Sep 20 13:46:09 EDT 1995):
17868: # * Changed xterm lines to 24, the X11R6 default.
17869: # 9.9.2 (Sat Sep 23 21:29:21 EDT 1995):
17870: # * Added 7 newly discovered, undocumented acsc characters to linux
17871: # entry (the pryz{|} characters).
17872: # * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly.
17873: # * Correct two typos in the xterm entries introduced in 9.9.1.
17874: # * I finally figured out how to translate ko capabilities. Done.
17875: # * Added tvi921 entries from Tim Theisen.
17876: # * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl.
17877: # * Removed mystery tec entry, it was neither interesting nor useful.
17878: # * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f,
17879: # vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a,
17880: # trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211,
17881: # by making them relative to use capabilities
17882: # * Added cuf1=^L to tvi925 from deleted variant tvi925a.
17883: # * fixed cup in adm22 entry and parametrized strings in vt320-k3.
17884: # * added it#8 to entries that used to have :pt: -- tvi912, vi200,
17885: # ampex80,
17886: # * Translate all home=\E[;H capabilities to home=\E[H, they're
17887: # equivalent.
17888: # * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of
17889: # vt100 and ANSI-like terminals.
17890: # 9.9.3 (Tue Sep 26 20:11:15 EDT 1995):
17891: # * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic
17892: # does this now, too.
17893: # * fviewpoint is gone, it duplicated screwpoint.
17894: # * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c,
17895: # ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3,
17896: # versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW.
17897: # The UW vi50 replaces the old one, which becomes vi50adm,
17898: # * No more embedded commas in name fields.
17899: #
17900: # 9.10.0 (Wed Oct 4 15:39:37 EDT 1995):
17901: # * XENIX forms characters in fos, trs16, scoansi become acsc strings,
17902: # * Introduced klone+* entries for describing Intel-console behavior.
17903: # * Linux kbs is default-mapped to delete for some brain-dead reason.
17904: # * -nsl -> -ns. The -pp syntax is obsolete.
17905: # * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs.
17906: # * Make xterm entry do application-keypad mode again. I got complaints
17907: # that it was messing up someone's 3270 emulator.
17908: # * Added some longname fields in order to avoid warning messages from
17909: # older tic implementations.
1.11 millert 17910: # * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use
1.1 millert 17911: # it! (This gives us pi, greater than, less than, and a few more.)
17912: # * Freeze for ncurses-1.9.6 release.
17913: # 9.10.1 (Sat Oct 21 22:18:09 EDT 1995):
17914: # * Add xon to a number of console entries, they're memory-mapped and
17915: # don't need padding.
17916: # * Correct the use dependencies in the ansi series.
17917: # * Hand-translate more XENIX capabilities.
17918: # * Added hpterm entry for HP's X terminal emulator.
17919: # * Added aixterm entries.
17920: # * Shortened four names so everything fits in 14 chars.
17921: #
17922: # 9.11.0 (Thu Nov 2 17:29:35 EST 1995):
17923: # * Added ibcs2 entry and info on iBCS2 standard.
17924: # * Corrected hpa/vpa in linux entry. They still fail the worm test.
17925: # * We can handle the HP meml/memu capability now.
17926: # * Added smacs to klone entries, just as documentation.
17927: # * Carrected ansi.sys and cit-500 entries.
17928: # * Added z39, vt320-k311, v220c, and avatar entries.
17929: # * Make pcansi use the ansi.sys invis capability.
17930: # * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c,
17931: # tvi925, tvi950, dt80, ncr7900i, h19.
17932: # * X3.64 has been withdrawn, change some references.
17933: # * Removed function keys from ansi-m entry.
17934: # * Corrected ansi.sys entry.
17935: # * Freeze for ncurses-1.9.7 release.
17936: # 9.11.1 (Tue Nov 6 18:18:38 EST 1995):
17937: # * Added rmam/smam capabilities to many entries based on init strings.
17938: # * Added correct hpa/vpa to linux.
17939: # * Reduced several entries relative to vt52.
17940: # 9.11.2 (Tue Nov 7 00:21:06 EST 1995):
17941: # * Exiled some utterly unidentifiable custom and homebrew types to the
17942: # UFO file; also, obsolete small-screen hardware; also, entries which
17943: # look flat-out incorrect, garbled, or redundant. These include the
17944: # following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec,
17945: # tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile,
17946: # apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu,
17947: # fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55,
17948: # yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2,
17949: # vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200,
17950: # trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40,
17951: # att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w,
17952: # tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na,
17953: # c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na,
17954: # regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb,
17955: # vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam,
17956: # vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms.
17957: # * Corrected pcvt25h as suggested by Brian C. Grayson
17958: # <bgrayson@pine.ece.utexas.edu>.
17959: # 9.11.3 (Thu Nov 9 12:14:40 EST 1995):
17960: # * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H.
17961: # * Added kent=\EOM to xterm entry.
17962: #
17963: # 9.11.4 (Fri Nov 10 08:31:35 EST 1995):
17964: # * Corrected gigi entry.
17965: # * Restored cuf/cud1 to xterm, their apparent bugginess was due to
17966: # bad hpa/vpa capabilities.
17967: # * Corrected flash strings to have a uniform delay of .2 sec. No
17968: # more speed-dependent NUL-padding!
17969: # * terminfo capabilities in comments bracketed with <>.
17970: # 9.11.5 (Fri Nov 10 15:35:02 EST 1995):
17971: # * Replaced pcvt with the 3.31 pcvt entries.
17972: # * Freeze for 1.9.7a.
17973: # 9.11.6 (Mon Nov 13 10:20:24 EST 1995):
17974: # * Added emu entry from the X11R6 contrib tape sources.
17975: #
17976: # 9.12.0 (Wed Nov 29 04:22:25 EST 1995):
17977: # * Improved iris-ansi and sun entries.
17978: # * More flash string improvements.
17979: # * Corrected wy160 & wy160 as suggested by Robert Dunn
17980: # * Added dim to at386.
17981: # * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says
17982: # he's ready to start using the termcap generated from this one.
17983: # * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m,
17984: # ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220.
17985: # * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925,
17986: # att610, att620, att630,
17987: # * Changed hazeltine name prefix from h to hz.
17988: # * Sent t500 to the UFI file.
17989: # * I think we've sucked all the juice out of BSDI's termcap file now.
17990: # * Freeze for ncurses 1.9.8 release
17991: # 9.12.1 (Thu Nov 30 03:14:06 EST 1995)
17992: # * Unfreeze, linux kbs needed to be fixed.
17993: # * Tim Theisen pinned down a bug in the DMD firmware.
17994: # 9.12.2 (Thu Nov 30 19:08:55 EST 1995):
17995: # * Fixes to ansi and klone capabilities (thank you, Aaron Ucko).
17996: # (The broken ones had been shadowed by sgr.)
17997: # 9.12.3 (Thu Dec 7 17:47:22 EST 1995):
17998: # * Added documentation on ECMA-48 standard.
17999: # * New Amiga entry.
18000: # 9.12.4 (Thu Dec 14 04:16:39 EST 1995):
18001: # * More ECMA-48 stuff
18002: # * Corrected typo in minix entry, added pc-minix.
18003: # * Corrected khome/kend in xterm (thank you again, Aaron Ucko).
18004: # * Added rxvt entry.
18005: # * Added 1.3.x color-change capabilities to linux entry.
18006: # 9.12.5 (Tue Dec 19 00:22:10 EST 1995):
18007: # * Corrected rxvt entry khome/kend.
18008: # * Corrected linux color change capabilities.
18009: # * NeXT entries from Dave Wetzel.
18010: # * Cleaned up if and rf file names (all in /usr/share now).
18011: # * Changed linux op capability to avoid screwing up a background color
18012: # pair set by setterm.
18013: # 9.12.6 (Wed Feb 7 16:14:35 EST 1996):
18014: # * Added xterm-sun.
18015: # 9.12.7 (Fri Feb 9 13:27:35 EST 1996):
18016: # * Added visa50.
18017: #
18018: # 9.13.0 (Sun Mar 10 00:13:08 EST 1996):
18019: # * Another sweep through the Shuford archive looking for new info.
18020: # * Added dg100 alias to dg6053 based on a comp.terminals posting.
18021: # * Added st52 from Per Persson.
18022: # * Added eterm from the GNU Emacs 19.30 distribution.
18023: # * Freeze for 1.9.9.
18024: # 9.13.1 (Fri Mar 29 14:06:46 EST 1996):
18025: # * FreeBSD console entries from Andrew Chernov.
18026: # * Removed duplicate Atari st52 name.
18027: # 9.13.2 (Tue May 7 16:10:06 EDT 1996)
18028: # * xterm doesn't actually have ACS_BLOCK.
18029: # * Change klone+color setf/setb to simpler forms that can be
18030: # translated into termcap.
18031: # * Added xterm1.
18032: # * Removed mechanically-generated junk capabilities from cons* entries.
18033: # * Added color support to bsdos.
18034: # 9.13.3 (Thu May 9 10:35:51 EDT 1996):
18035: # * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>.
18036: # * Created ecma+color, linux can use it. Also added ech to linux.
18037: # * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates.
18038: # * Add descriptions to FreeBSD console entries. Also shorten
18039: # some aliases to <= 14 chars for portability.
18040: # * Added x68k console
18041: # * Added OTbs to several VT-series entries.
18042: # 9.13.4 (Wed May 22 10:54:09 EDT 1996):
18043: # * screen entry update for 3.7.1 from Michael Alan Dorfman.
18044: # 9.13.5 (Wed Jun 5 11:22:41 EDT 1996):
18045: # * kterm correction due to Kenji Rikitake.
18046: # * ACS correction in vt320-kll due to Phillippe De Muyter.
18047: # 9.13.6 (Sun Jun 16 15:01:07 EDT 1996):
18048: # * Sun console entry correction from J.T. Conklin.
18049: # * Changed all DEC VT300 and up terminals to use VT300 tab set
18050: # 9.13.7 (Mon Jul 8 20:14:32 EDT 1996):
18051: # * Added smul to linux entry (we never noticed it was missing
18052: # because of sgr!).
18053: # * Added rmln to hp+labels (deduced from other HP entries).
18054: # * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas,
18055: # pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3.
18056: # * Corrected vt220 acsc.
18057: # * The klone+sgr and klone+sgr-dumb entries now use klone+acs;
18058: # this corresponds to reality and helps prevent some tic warnings.
18059: # * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2,
18060: # hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11,
18061: # adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200,
18062: # qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc,
18063: # wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90,
18064: # adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p,
18065: # f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000,
18066: # owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx,
18067: # lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25,
18068: # dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800,
18069: # ifmr, v3220, wy100q, tandem653, ibmaed.
18070: # * Added DWK terminal description.
18071: # 9.13.8 (Wed Jul 10 11:45:21 EDT 1996):
18072: # * Many entries now have highlights inherited from adm+sgr.
18073: # * xterm entry now corresponds to XFree86 3.1.2E, with color.
18074: # * xtitle and xtitle-twm enable access to the X status line.
18075: # * Added linux-1.3.6 color palette caps in conventional format.
18076: # * Added adm1178 terminal.
18077: # * Move fos and apollo terminals to obsolete category.
18078: # * Aha! The BRL terminals file told us what the Iris extensions mean.
18079: # * Added, from the BRL termcap file: rt6221, rt6221-w, northstar,
18080: # commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file:
18081: # cit500, adm11.
18082: # 9.13.9 (Mon Jul 15 00:32:51 EDT 1996):
18083: # * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756,
18084: # aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155.
18085: # * Corrected, from BRL termcap file: vi50.
18086: # * Better rxvt entry & corrected xterm entries from Thomas Dickey.
18087: # 9.13.10 (Mon Jul 15 12:20:13 EDT 1996):
18088: # * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1,
18089: # att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne
18090: # (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi,
18091: # tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro,
18092: # apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae.
18093: # * Paired-attribute fixes to various terminals.
18094: # * Sun entry corrections from A. Lukyanov & Gert-Jan Vons.
18095: # * xterm entry corrections from Thomas Dickey.
18096: # 9.13.11 (Tue Jul 30 16:42:58 EDT 1996):
18097: # * Added t916 entry, translated from a termcap in SCO's support area.
18098: # * New qnx entry from Michael Hunter.
18099: # 9.13.12 (Mon Aug 5 14:31:11 EDT 1996):
18100: # * Added hpex2 from Ville Sulko.
18101: # * Fixed a bug that ran the qnx and pcvtXX together.
18102: # 9.13.13 (Fri Aug 9 01:16:17 EDT 1996):
18103: # * Added dtterm entry from Solaris CDE.
18104: # 9.13.14 (Tue Sep 10 15:31:56 EDT 1996):
18105: # * corrected pairs#8 typo in dtterm entry.
18106: # * added tvi9065.
18107: # 9.13.15 (Sun Sep 15 02:47:05 EDT 1996):
18108: # * updated xterm entry to cover 3.1.2E's new features.
18109: # 9.13.16 (Tue Sep 24 12:47:43 EDT 1996):
18110: # * Added new minix entry
18111: # * Removed aliases of the form ^[0-9]* for obsolete terminals.
18112: # * Commented out linux-old, nobody's using pre-1.2 kernels now.
18113: # 9.13.17 (Fri Sep 27 13:25:38 EDT 1996):
18114: # * Added Prism entries and kt7ix.
18115: # * Caution notes about EWAN and tabset files.
18116: # * Changed /usr/lib/tabset -> /usr/share/tabset.
18117: # * Added acsc/rmacs/smacs to vt52.
18118: # 9.13.18 (Mon Oct 28 13:24:59 EST 1996):
18119: # * Merged in Thomas Dickey's reorganization of the xterm entries;
18120: # added technical corrections to avoid warning messages.
18121: # 9.13.19 (Sat Nov 16 16:05:49 EST 1996):
18122: # * Added rmso=\E[27m in Linux entry.
18123: # * Added koi8-r support for Linux console.
18124: # * Replace xterm entries with canonical ones from XFree86 3.2.
18125: # 9.13.20 (Sun Nov 17 23:02:51 EST 1996):
18126: # * Added color_xterm from Jacob Mandelson
18127: # 9.13.21 (Mon Nov 18 12:43:42 EST 1996):
18128: # * Back off the xterm entry to use r6 as a base.
18129: # 9.13.22 (Sat Nov 30 11:51:31 EST 1996):
18130: # * Added dec-vt220 at Adrian Garside's request.
18131: # 9.13.23 (Fri Feb 21 16:36:06 EST 1997):
18132: # * Replaced minitel-2 entry.
18133: # * Added MGR, ansi-nt.
18134: # * Minor corrections to xterm entries.
18135: # * Replaced EWAN telnet entry.
18136: # * Dropped the reorder script generator. It was a fossil.
18137: # 9.13.24 (Sun Feb 23 20:55:23 EST 1997):
18138: # * Thorsten Lockert added termcap `bs' to a lot of types, working from
18139: # the 4.4BSD Lite2 file.
18140: # 9.13.25 (Fri Jun 20 12:33:36 EDT 1997):
18141: # * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js.
18142: # * Updated iris-ansi; corrected vt102-w.
18143: # * Switch base xterm entry to 3.3 level.
18144: # 9.13.26 (Mon Jun 30 22:45:45 EDT 1997)
18145: # * Added basic4.
18146: # * Removed rmir/smir from tv92B.
18147: #
18148: # 10.2.0 (Sat Feb 28 12:47:36 EST 1998):
18149: # * add hds200 description (Walter Skorski)
18150: # * add beterm entry (Fred Fish)
18151: # * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color,
18152: # iris-color entries.
18153: # * add emx entries.
18154: # * Replaced unixpc entry with Benjamin Sittler's corrected version.
18155: # * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's
18156: # versions.
18157: # * remove sgr string from qnx based on report by Xiaodan Tang
18158: # * Added u8/u9, removed rmul/smul from sun-il.
18159: # * 4.2 tic displays \0 rather than \200.
18160: # * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc,
18161: # apparently based on cp-866).
18162: # * Merged in Pavel Roskin's acsc for linux-koi8
1.11 millert 18163: # * Corrected some erroneous \\'s to \.
1.1 millert 18164: # * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV.
18165: # * II -> ii in pcvtXX, screen, xterm.
18166: # * Removed \n chars following ANSI escapes in sgr & friends.
18167: # * Updated Wyse entries.
18168: # * h19 corrections from Tim Pierce.
18169: # * Noted that the dm2500 has both ich and smir.
18170: # * added pccons for the Alpha under OSF/1.
18171: # * Added Sony NEWS workstation entries and cit101e-rv.
18172: # * Reverted `amiga'; to Kent Polk's version, as I'm told
18173: # the Verkuil entry messes up with Amiga Telnet.
18174: # 10.2.1 (Sun Mar 8 18:32:04 EST 1998):
18175: # * Corrected attributions in 10.2.0 release notes.
18176: # * Scanned the Shuford archive for new terminfos and information.
18177: # * Removed sgr from qnx entry (Thomas Dickey).
18178: # * Added entries for ICL and Kokusai Data Systems terminals.
18179: # * Incorporated NCR terminfos from the Boundless Technology FTP site.
18180: # * Incorporated att700 from the Boundless Technology FTP site.
18181: # * Miscellaneous contact-address and Web-page updates.
1.11 millert 18182: #
18183: # 1998/5/9
1.1 millert 18184: # * add nxterm and xterm-color terminfo description (request by Cristian
18185: # Gafton <gafton@redhat.com>).
1.11 millert 18186: # * modify rxvt terminfo description to clear alternate screen before
1.1 millert 18187: # switching back to normal screen, for compatibility with applications
18188: # which use xterm (reported by Manoj Kasichainula <manojk@io.com>).
1.11 millert 18189: # * modify linux terminfo description to reset color palette (reported
1.1 millert 18190: # by Telford Tendys <telford@eng.uts.edu.au>).
1.11 millert 18191: #
18192: # 1998/7/4
18193: # * merge changes from current XFree86 xterm terminfo descriptions.
18194: #
18195: # 1998/7/25
1.1 millert 18196: # * Added minitel1 entries from Alexander Montaron.
18197: # * Added qnxt2 from Federico Bianchi.
1.11 millert 18198: # * Added arm100 terminfo entries from Dave Millen.
18199: #
18200: # 1998/8/6
18201: # * Added ncsa telnet entries from Francesco Potorti
18202: #
18203: # 1998/8/15
18204: # * modify ncsa telnet entry to reflect color, other capabilities based on
18205: # examination of the source code - T.Dickey.
18206: #
18207: # 1998/8/22
18208: # * Corrected some erroneous \\'s to \ (eterm, osborne) - TD.
18209: #
18210: # 1998/8/29
18211: # * Added Francesco Potorti's tuned Wyse 99 entries.
1.1 millert 18212: # * dtterm enacs correction from Alexander V. Lukyanov.
1.11 millert 18213: # * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version.
18214: # * correct a typo in icl6404 entry.
18215: # * add xtermm and xtermc
18216: #
18217: # 1998/9/26
18218: # * format most %'char' sequences to %{number}
18219: # * adapt IBM AIX 3.2.5 terminfo - T.Dickey
18220: # * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD
18221: #
18222: # 1998/10/10
18223: # * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD
18224: # * correct initialization string in xterm-r5, add misc other features
18225: # to correspond with xterm patch 84 - TD
18226: #
18227: # 1998/12/19
18228: # * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD
18229: # * add Mathew Vernon's mach console entries
18230: # * corrections for ncsa function-keys (report by Larry Virden)
18231: #
18232: # 1998/12/19
18233: # * change linux to use ncv#2, since underline does not work with color - TD
18234: #
18235: # 1999/1/9
18236: # * add kbt to iris-ansi, document other shift/control functionkeys - TD
18237: # * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad
18238: # application modes, change kent to use the correct keypad code - TD
18239: #
18240: # 1999/1/10
18241: # * add entry for Tera Term - TD
18242: #
18243: # 1999/1/23
18244: # * minor improvements for teraterm entry - TD
18245: # * rename several entries used by BSDI: bsdos to bsdos-pc-nobold,
18246: # and bsdos-bold to bsdos-pc (Jeffrey C Honig)
18247: #
18248: # 1999/2/20
18249: # * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in
18250: # xterm and ncsa entries by removing the unneeded ones. Note that
18251: # some entries will return kend & khome versus kslt and kfnd, for
18252: # PC-style keyboards versus strict vt220 compatiblity - TD
18253: #
18254: # 1999/3/13
18255: # * adjust xterm-xfree86 khome/kend to match default PC-style keyboard
18256: # tables - TD
18257: # * add 'crt' entry - TD
18258: # * correct typos in 'linux-c' entry - TD
18259: #
18260: # 1999/3/14
18261: # * update entries for BSD/OS console to use klone+sgr and klone+color
18262: # (Jeffrey C Honig)
18263: #
18264: # 1999/3/27
18265: # * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD.
18266: #
18267: # 1999/4/10
18268: # * add linux-lat, from RedHat patches to ncurses 4.2
18269: #
18270: # 1999/4/17
18271: # * add complete set of default function-key definitions for scoansi - TD.
18272: #
18273: # 1999/7/3
18274: # * add cnorm, cvvis for Linux 2.2 kernels
18275: #
18276: # 1999/7/24
18277: # * add kmous to xterm-r5 -TD
18278: # * correct entries xterm+sl and xterm+sl-twm, which were missing the
18279: # parent "use" clause -TD
18280: #
18281: # 1999/7/31
18282: # * corrected cnorm, added el1 in 'screen' description -TD
18283: #
18284: # 1999/8/14
18285: # * add ms-vt100 -TD
18286: #
18287: # 1999/8/21
18288: # * corrections to beterm entry -TD
18289: #
18290: # 1999/8/28
18291: # * add cygwin entry -TD
18292: #
18293: # 1999/9/4
18294: # * minor corrections for beterm entry -TD
18295: #
18296: # 1999/9/18
18297: # * add acsc string to HP 70092 terminfo entry -Joerg Wunsch
18298: #
18299: # 1999/9/25
18300: # * add amiga-8bit entry
18301: # * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons,
18302: # rcons-color, based on
18303: # ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src
18304: # * add alias for iris-ansi-net
18305: #
18306: # 1999/10/2
18307: # * corrected scoansi entry's acsc, some function keys, add color -TD
18308: #
18309: # 1999/10/23
18310: # * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD
18311: # * reorder ncsa entries to make ncsa-vt220 use the alternate function
18312: # key mapping, leaving Potorti's entries more like he named them -TD
18313: # * remove enter/exit am-mode from cygwin -TD
18314: #
18315: # 1999/10/30
18316: # * correct typos in several entries (missing '[' from CSI):
18317: # mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir
18318: # strings for avt-ns -TD
18319: # * add 'dim' to ncv mask for linux (report by Klaus Weide).
18320: #
18321: # 1999/11/27
18322: # * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD
18323: # * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD
18324: # * add xterm-88color and xterm-256color -TD
18325: #
18326: # 1999/12/4
18327: # * add "obsolete" termcap strings -TD
18328: # * add kvt and gnome entries -TD
18329: #
18330: # 1999/12/11
18331: # * correct cup string for regent100 -TD
18332: #
18333: # 2000/1/1
18334: # * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD
18335: # * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD
18336: # * change OTrs capabilities to rs2 -TD
18337: # * add obsolete and extended capabilities to 'screen' -TD
1.13 millert 18338: #
18339: # 2000/1/5
18340: # * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts
18341: # with kf10 -TD
18342: # * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove',
18343: # and adding kcbt -TD
1.14 millert 18344: #
18345: # 2000/1/12
18346: # * remove incorrect khome/kend from xterm-xf86-v333, which was based on
18347: # nonstandard resource settings -TD
18348: #
18349: # 2000/2/26
18350: # * minor fixes for xterm-*, based on Debian #58530 -TD
18351: #
18352: # 2000/3/4
18353: # * add several terminal types from esr's "11.0", as well as comments.
18354: # bg300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*,
18355: # vt220-8bit, vt220-old, wy85-8bit
1.19 millert 18356: #
18357: # 2000/3/18
18358: # * add several terminal types from esr's "11.0.1" (ansi-*).
18359: # * update OTxx capabilities for changes on 2000/3/4.
18360: # * revert part of vt220 change (request by Todd C Miller for OpenBSD)
1.20 ! millert 18361: #
! 18362: # 2000/3/26
! 18363: # * move screen's AX extension to ecma+color, modify several entries to
! 18364: # use that, adjusting ncv as needed -TD
1.1 millert 18365: #
18366: # The following sets edit modes for GNU EMACS.
18367: # Local Variables:
18368: # fill-prefix:"\t"
18369: # fill-column:75
18370: # comment-column:0
18371: # comment-start-skip:"^#+"
18372: # comment-start:"# "
1.11 millert 18373: # compile-command:"tic -c terminfo.master"
1.1 millert 18374: # End:
18375: ######## SHANTIH! SHANTIH! SHANTIH!