File: [local] / src / usr.bin / make / parse.c (download)
Revision 1.66, Sun Nov 11 12:35:02 2001 UTC (22 years, 6 months ago) by espie
Branch: MAIN
CVS Tags: OPENBSD_3_1_BASE, OPENBSD_3_1
Changes since 1.65: +4 -4 lines
Fixed version... don't see how this could work on i386, since it didn't
initialize create in main.c.
|
/* $OpenPackages$ */
/* $OpenBSD: parse.c,v 1.66 2001/11/11 12:35:02 espie Exp $ */
/* $NetBSD: parse.c,v 1.29 1997/03/10 21:20:04 christos Exp $ */
/*
* Copyright (c) 1999 Marc Espie.
*
* Extensive code changes for the OpenBSD project.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE OPENBSD PROJECT AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OPENBSD
* PROJECT OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1988, 1989, 1990, 1993
* The Regents of the University of California. All rights reserved.
* Copyright (c) 1989 by Berkeley Softworks
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Adam de Boor.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <assert.h>
#include <ctype.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "config.h"
#include "defines.h"
#include "dir.h"
#include "job.h"
#include "buf.h"
#include "for.h"
#include "lowparse.h"
#include "arch.h"
#include "cond.h"
#include "suff.h"
#include "parse.h"
#include "var.h"
#include "targ.h"
#include "error.h"
#include "str.h"
#include "main.h"
#include "gnode.h"
#include "memory.h"
#include "extern.h"
#include "lst.h"
#include "parsevar.h"
#include "stats.h"
#include "garray.h"
static struct growableArray gsources, gtargets;
#define SOURCES_SIZE 128
#define TARGETS_SIZE 32
static LIST theParseIncPath;/* list of directories for "..." includes */
static LIST theSysIncPath; /* list of directories for <...> includes */
Lst sysIncPath = &theSysIncPath;
Lst parseIncPath = &theParseIncPath;
#ifdef CLEANUP
static LIST targCmds; /* command lines for targets */
#endif
static GNode *mainNode; /* The main target to create. This is the
* first target on the first dependency
* line in the first makefile */
/*-
* specType contains the SPECial TYPE of the current target. It is
* Not if the target is unspecial. If it *is* special, however, the children
* are linked as children of the parent but not vice versa. This variable is
* set in ParseDoDependency
*/
typedef enum {
Begin, /* .BEGIN */
Default, /* .DEFAULT */
End, /* .END */
Ignore, /* .IGNORE */
Includes, /* .INCLUDES */
Interrupt, /* .INTERRUPT */
Libs, /* .LIBS */
MFlags, /* .MFLAGS or .MAKEFLAGS */
Main, /* .MAIN and we don't have anything user-specified to
* make */
NoExport, /* .NOEXPORT */
NoPath, /* .NOPATH */
Not, /* Not special */
NotParallel, /* .NOTPARALELL */
Null, /* .NULL */
Order, /* .ORDER */
Parallel, /* .PARALLEL */
ExPath, /* .PATH */
Phony, /* .PHONY */
Precious, /* .PRECIOUS */
ExShell, /* .SHELL */
Silent, /* .SILENT */
SingleShell, /* .SINGLESHELL */
Suffixes, /* .SUFFIXES */
Wait, /* .WAIT */
Attribute /* Generic attribute */
} ParseSpecial;
static ParseSpecial specType;
static int waiting;
/*
* Predecessor node for handling .ORDER. Initialized to NULL when .ORDER
* seen, then set to each successive source on the line.
*/
static GNode *predecessor;
/*
* The parseKeywords table is searched using binary search when deciding
* if a target or source is special. The 'spec' field is the ParseSpecial
* type of the keyword ("Not" if the keyword isn't special as a target) while
* the 'op' field is the operator to apply to the list of targets if the
* keyword is used as a source ("0" if the keyword isn't special as a source)
*/
static struct {
char *name; /* Name of keyword */
ParseSpecial spec; /* Type when used as a target */
int op; /* Operator when used as a source */
} parseKeywords[] = {
{ ".BEGIN", Begin, 0 },
{ ".DEFAULT", Default, 0 },
{ ".END", End, 0 },
{ ".EXEC", Attribute, OP_EXEC },
{ ".IGNORE", Ignore, OP_IGNORE },
{ ".INCLUDES", Includes, 0 },
{ ".INTERRUPT", Interrupt, 0 },
{ ".INVISIBLE", Attribute, OP_INVISIBLE },
{ ".JOIN", Attribute, OP_JOIN },
{ ".LIBS", Libs, 0 },
{ ".MADE", Attribute, OP_MADE },
{ ".MAIN", Main, 0 },
{ ".MAKE", Attribute, OP_MAKE },
{ ".MAKEFLAGS", MFlags, 0 },
{ ".MFLAGS", MFlags, 0 },
#if 0 /* basic scaffolding for NOPATH, not working yet */
{ ".NOPATH", NoPath, OP_NOPATH },
#endif
{ ".NOTMAIN", Attribute, OP_NOTMAIN },
{ ".NOTPARALLEL", NotParallel, 0 },
{ ".NO_PARALLEL", NotParallel, 0 },
{ ".NULL", Null, 0 },
{ ".OPTIONAL", Attribute, OP_OPTIONAL },
{ ".ORDER", Order, 0 },
{ ".PARALLEL", Parallel, 0 },
{ ".PATH", ExPath, 0 },
{ ".PHONY", Phony, OP_PHONY },
{ ".PRECIOUS", Precious, OP_PRECIOUS },
{ ".RECURSIVE", Attribute, OP_MAKE },
{ ".SHELL", ExShell, 0 },
{ ".SILENT", Silent, OP_SILENT },
{ ".SINGLESHELL", SingleShell, 0 },
{ ".SUFFIXES", Suffixes, 0 },
{ ".USE", Attribute, OP_USE },
{ ".WAIT", Wait, 0 },
};
static int ParseFindKeyword(const char *);
static void ParseLinkSrc(GNode *, GNode *);
static int ParseDoOp(GNode *, int);
static int ParseAddDep(GNode *, GNode *);
static void ParseDoSrc(int, const char *);
static int ParseFindMain(void *, void *);
static void ParseAddDir(void *, void *);
static void ParseClearPath(void *);
static void ParseDoDependency(char *);
static void ParseAddCmd(void *, void *);
static void ParseHasCommands(void *);
static void ParseDoInclude(char *);
static void ParseTraditionalInclude(char *);
static void ParseConditionalInclude(char *);
static void ParseLookupIncludeFile(char *, char *, bool, bool);
#define ParseReadLoopLine(linebuf) Parse_ReadUnparsedLine(linebuf, "for loop")
static void ParseFinishDependency(void);
static bool ParseIsCond(Buffer, Buffer, char *);
static char *strip_comments(Buffer, const char *);
static void ParseDoCommands(const char *);
/*-
*----------------------------------------------------------------------
* ParseFindKeyword --
* Look in the table of keywords for one matching the given string.
*
* Results:
* The index of the keyword, or -1 if it isn't there.
*----------------------------------------------------------------------
*/
static int
ParseFindKeyword(str)
const char *str; /* String to find */
{
int start,
end,
cur;
int diff;
start = 0;
end = (sizeof(parseKeywords)/sizeof(parseKeywords[0])) - 1;
do {
cur = start + (end - start) / 2;
diff = strcmp(str, parseKeywords[cur].name);
if (diff == 0) {
return cur;
} else if (diff < 0) {
end = cur - 1;
} else {
start = cur + 1;
}
} while (start <= end);
return -1;
}
/*-
*---------------------------------------------------------------------
* ParseLinkSrc --
* Link the parent node to its new child. Used by
* ParseDoDependency. If the specType isn't 'Not', the parent
* isn't linked as a parent of the child.
*
* Side Effects:
* New elements are added to the parents list of cgn and the
* children list of cgn. the unmade field of pgn is updated
* to reflect the additional child.
*---------------------------------------------------------------------
*/
static void
ParseLinkSrc(pgn, cgn)
GNode *pgn; /* The parent node */
GNode *cgn; /* The child node */
{
if (Lst_AddNew(&pgn->children, cgn)) {
if (specType == Not)
Lst_AtEnd(&cgn->parents, pgn);
pgn->unmade++;
}
}
/*-
*---------------------------------------------------------------------
* ParseDoOp --
* Apply the parsed operator to the given target node. Used in a
* Lst_Find call by ParseDoDependency once all targets have
* been found and their operator parsed. If the previous and new
* operators are incompatible, a major error is taken.
*
* Side Effects:
* The type field of the node is altered to reflect any new bits in
* the op.
*---------------------------------------------------------------------
*/
static int
ParseDoOp(gn, op)
GNode *gn; /* The node to which the operator is to be
* applied */
int op; /* The operator to apply */
{
/*
* If the dependency mask of the operator and the node don't match and
* the node has actually had an operator applied to it before, and
* the operator actually has some dependency information in it, complain.
*/
if (((op & OP_OPMASK) != (gn->type & OP_OPMASK)) &&
!OP_NOP(gn->type) && !OP_NOP(op)) {
Parse_Error(PARSE_FATAL, "Inconsistent operator for %s", gn->name);
return 0;
}
if (op == OP_DOUBLEDEP && ((gn->type & OP_OPMASK) == OP_DOUBLEDEP)) {
/* If the node was the object of a :: operator, we need to create a
* new instance of it for the children and commands on this dependency
* line. The new instance is placed on the 'cohorts' list of the
* initial one (note the initial one is not on its own cohorts list)
* and the new instance is linked to all parents of the initial
* instance. */
GNode *cohort;
LstNode ln;
unsigned int i;
cohort = Targ_NewGN(gn->name);
/* Duplicate links to parents so graph traversal is simple. Perhaps
* some type bits should be duplicated?
*
* Make the cohort invisible as well to avoid duplicating it into
* other variables. True, parents of this target won't tend to do
* anything with their local variables, but better safe than
* sorry. */
for (ln = Lst_First(&gn->parents); ln != NULL; ln = Lst_Adv(ln))
ParseLinkSrc((GNode *)Lst_Datum(ln), cohort);
cohort->type = OP_DOUBLEDEP|OP_INVISIBLE;
Lst_AtEnd(&gn->cohorts, cohort);
/* Replace the node in the targets list with the new copy */
for (i = 0; i < gtargets.n; i++)
if (gtargets.a[i] == gn)
break;
gtargets.a[i] = cohort;
gn = cohort;
}
/* We don't want to nuke any previous flags (whatever they were) so we
* just OR the new operator into the old. */
gn->type |= op;
return 1;
}
/*-
*---------------------------------------------------------------------
* ParseAddDep --
* Check if the pair of GNodes given needs to be synchronized.
* This has to be when two nodes are on different sides of a
* .WAIT directive.
*
* Results:
* Returns 0 if the two targets need to be ordered, 1 otherwise.
* If it returns 0, the search can stop.
*
* Side Effects:
* A dependency can be added between the two nodes.
*
*---------------------------------------------------------------------
*/
static int
ParseAddDep(p, s)
GNode *p;
GNode *s;
{
if (p->order < s->order) {
/* XXX: This can cause loops, and loops can cause unmade targets,
* but checking is tedious, and the debugging output can show the
* problem. */
Lst_AtEnd(&p->successors, s);
Lst_AtEnd(&s->preds, p);
return 1;
}
else
return 0;
}
/*-
*---------------------------------------------------------------------
* ParseDoSrc --
* Given the name of a source, figure out if it is an attribute
* and apply it to the targets if it is. Else decide if there is
* some attribute which should be applied *to* the source because
* of some special target and apply it if so. Otherwise, make the
* source be a child of the targets in the list 'targets'
*
* Side Effects:
* Operator bits may be added to the list of targets or to the source.
* The targets may have a new source added to their lists of children.
*---------------------------------------------------------------------
*/
static void
ParseDoSrc(tOp, src)
int tOp; /* operator (if any) from special targets */
const char *src; /* name of the source to handle */
{
GNode *gn = NULL;
if (*src == '.' && isupper(src[1])) {
int keywd = ParseFindKeyword(src);
if (keywd != -1) {
int op = parseKeywords[keywd].op;
if (op != 0) {
Array_Find(>argets, ParseDoOp, op);
return;
}
if (parseKeywords[keywd].spec == Wait) {
waiting++;
return;
}
}
}
switch (specType) {
case Main:
/*
* If we have noted the existence of a .MAIN, it means we need
* to add the sources of said target to the list of things
* to create. The string 'src' is likely to be freed, so we
* must make a new copy of it. Note that this will only be
* invoked if the user didn't specify a target on the command
* line. This is to allow #ifmake's to succeed, or something...
*/
Lst_AtEnd(create, estrdup(src));
/*
* Add the name to the .TARGETS variable as well, so the user can
* employ that, if desired.
*/
Var_Append(".TARGETS", src, VAR_GLOBAL);
return;
case Order:
/*
* Create proper predecessor/successor links between the previous
* source and the current one.
*/
gn = Targ_FindNode(src, TARG_CREATE);
if (predecessor != NULL) {
Lst_AtEnd(&predecessor->successors, gn);
Lst_AtEnd(&gn->preds, predecessor);
}
/*
* The current source now becomes the predecessor for the next one.
*/
predecessor = gn;
break;
default:
/*
* If the source is not an attribute, we need to find/create
* a node for it. After that we can apply any operator to it
* from a special target or link it to its parents, as
* appropriate.
*
* In the case of a source that was the object of a :: operator,
* the attribute is applied to all of its instances (as kept in
* the 'cohorts' list of the node) or all the cohorts are linked
* to all the targets.
*/
gn = Targ_FindNode(src, TARG_CREATE);
if (tOp) {
gn->type |= tOp;
} else {
Array_ForEach(>argets, ParseLinkSrc, gn);
}
if ((gn->type & OP_OPMASK) == OP_DOUBLEDEP) {
GNode *cohort;
LstNode ln;
for (ln=Lst_First(&gn->cohorts); ln != NULL; ln = Lst_Adv(ln)){
cohort = (GNode *)Lst_Datum(ln);
if (tOp) {
cohort->type |= tOp;
} else {
Array_ForEach(>argets, ParseLinkSrc, cohort);
}
}
}
break;
}
gn->order = waiting;
Array_AtEnd(&gsources, gn);
if (waiting) {
Array_Find(&gsources, ParseAddDep, gn);
}
}
/*-
*-----------------------------------------------------------------------
* ParseFindMain --
* Find a real target in the list and set it to be the main one.
* Called by ParseDoDependency when a main target hasn't been found
* yet.
*
* Results:
* 1 if main not found yet, 0 if it is.
*
* Side Effects:
* mainNode is changed and Targ_SetMain is called.
*-----------------------------------------------------------------------
*/
static int
ParseFindMain(gnp, dummy)
void *gnp; /* Node to examine */
void *dummy UNUSED;
{
GNode *gn = (GNode *)gnp;
if ((gn->type & OP_NOTARGET) == 0) {
mainNode = gn;
Targ_SetMain(gn);
return 0;
} else {
return 1;
}
}
/*-
*-----------------------------------------------------------------------
* ParseAddDir --
* Front-end for Dir_AddDir to make sure Lst_ForEach keeps going
*
* Side Effects:
* See Dir_AddDir.
*-----------------------------------------------------------------------
*/
static void
ParseAddDir(path, name)
void *path;
void *name;
{
Dir_AddDir((Lst)path, (char *)name);
}
/*-
*-----------------------------------------------------------------------
* ParseClearPath --
* Reinit path to an empty path
*-----------------------------------------------------------------------
*/
static void
ParseClearPath(p)
void *p;
{
Lst path = (Lst)p;
Lst_Destroy(path, Dir_Destroy);
Lst_Init(path);
}
/*-
*---------------------------------------------------------------------
* ParseDoDependency --
* Parse the dependency line in line.
*
* Side Effects:
* The nodes of the sources are linked as children to the nodes of the
* targets. Some nodes may be created.
*
* We parse a dependency line by first extracting words from the line and
* finding nodes in the list of all targets with that name. This is done
* until a character is encountered which is an operator character. Currently
* these are only ! and :. At this point the operator is parsed and the
* pointer into the line advanced until the first source is encountered.
* The parsed operator is applied to each node in the 'targets' list,
* which is where the nodes found for the targets are kept, by means of
* the ParseDoOp function.
* The sources are read in much the same way as the targets were except
* that now they are expanded using the wildcarding scheme of the C-Shell
* and all instances of the resulting words in the list of all targets
* are found. Each of the resulting nodes is then linked to each of the
* targets as one of its children.
* Certain targets are handled specially. These are the ones detailed
* by the specType variable.
* The storing of transformation rules is also taken care of here.
* A target is recognized as a transformation rule by calling
* Suff_IsTransform. If it is a transformation rule, its node is gotten
* from the suffix module via Suff_AddTransform rather than the standard
* Targ_FindNode in the target module.
*---------------------------------------------------------------------
*/
static void
ParseDoDependency(line)
char *line; /* the line to parse */
{
char *cp; /* our current position */
GNode *gn; /* a general purpose temporary node */
int op; /* the operator on the line */
char savec; /* a place to save a character */
LIST paths; /* List of search paths to alter when parsing
* a list of .PATH targets */
int tOp; /* operator from special target */
tOp = 0;
specType = Not;
waiting = 0;
Lst_Init(&paths);
Array_Reset(&gsources);
do {
for (cp = line; *cp && !isspace(*cp) && *cp != '(';)
if (*cp == '$')
/* Must be a dynamic source (would have been expanded
* otherwise), so call the Var module to parse the puppy
* so we can safely advance beyond it...There should be
* no errors in this, as they would have been discovered
* in the initial Var_Subst and we wouldn't be here. */
cp += Var_ParseSkip(cp, NULL, NULL);
else {
/* We don't want to end a word on ':' or '!' if there is a
* better match later on in the string. By "better" I mean
* one that is followed by whitespace. This allows the user
* to have targets like:
* fie::fi:fo: fum
* where "fie::fi:fo" is the target. In real life this is used
* for perl5 library man pages where "::" separates an object
* from its class. Ie: "File::Spec::Unix". This behaviour
* is also consistent with other versions of make. */
if (*cp == '!' || *cp == ':') {
char *p = cp + 1;
if (*cp == ':' && *p == ':')
p++;
/* Found the best match already. */
if (isspace(*p) || *p == '\0')
break;
do {
p += strcspn(p, "!:");
if (*p == '\0')
break;
p++;
} while (!isspace(*p));
/* No better match later on... */
if (*p == '\0')
break;
}
cp++;
}
if (*cp == '(') {
LIST temp;
Lst_Init(&temp);
/* Archives must be handled specially to make sure the OP_ARCHV
* flag is set in their 'type' field, for one thing, and because
* things like "archive(file1.o file2.o file3.o)" are permissible.
* Arch_ParseArchive will set 'line' to be the first non-blank
* after the archive-spec. It creates/finds nodes for the members
* and places them on the given list, returning true if all
* went well and false if there was an error in the
* specification. On error, line should remain untouched. */
if (!Arch_ParseArchive(&line, &temp, NULL)) {
Parse_Error(PARSE_FATAL,
"Error in archive specification: \"%s\"", line);
return;
} else {
AppendList2Array(&temp, >argets);
Lst_Destroy(&temp, NOFREE);
continue;
}
}
savec = *cp;
if (*cp == '\0') {
/* Ending a dependency line without an operator is a Bozo no-no */
Parse_Error(PARSE_FATAL, "Need an operator");
return;
}
*cp = '\0';
/* Have a word in line. See if it's a special target and set
* specType to match it. */
if (*line == '.' && isupper(line[1])) {
/* See if the target is a special target that must have it
* or its sources handled specially. */
int keywd = ParseFindKeyword(line);
if (keywd != -1) {
if (specType == ExPath && parseKeywords[keywd].spec != ExPath) {
Parse_Error(PARSE_FATAL, "Mismatched special targets");
return;
}
specType = parseKeywords[keywd].spec;
tOp = parseKeywords[keywd].op;
/*
* Certain special targets have special semantics:
* .PATH Have to set the dirSearchPath
* variable too
* .MAIN Its sources are only used if
* nothing has been specified to
* create.
* .DEFAULT Need to create a node to hang
* commands on, but we don't want
* it in the graph, nor do we want
* it to be the Main Target, so we
* create it, set OP_NOTMAIN and
* add it to the list, setting
* DEFAULT to the new node for
* later use. We claim the node is
* A transformation rule to make
* life easier later, when we'll
* use Make_HandleUse to actually
* apply the .DEFAULT commands.
* .PHONY The list of targets
* .NOPATH Don't search for file in the path
* .BEGIN
* .END
* .INTERRUPT Are not to be considered the
* main target.
* .NOTPARALLEL Make only one target at a time.
* .SINGLESHELL Create a shell for each command.
* .ORDER Must set initial predecessor to NULL
*/
switch (specType) {
case ExPath:
Lst_AtEnd(&paths, dirSearchPath);
break;
case Main:
if (!Lst_IsEmpty(create)) {
specType = Not;
}
break;
case Begin:
case End:
case Interrupt:
gn = Targ_FindNode(line, TARG_CREATE);
gn->type |= OP_NOTMAIN;
Array_AtEnd(>argets, gn);
break;
case Default:
gn = Targ_NewGN(".DEFAULT");
gn->type |= OP_NOTMAIN|OP_TRANSFORM;
Array_AtEnd(>argets, gn);
DEFAULT = gn;
break;
case NotParallel:
{
extern int maxJobs;
maxJobs = 1;
break;
}
case SingleShell:
compatMake = 1;
break;
case Order:
predecessor = NULL;
break;
default:
break;
}
} else if (strncmp(line, ".PATH", 5) == 0) {
/*
* .PATH<suffix> has to be handled specially.
* Call on the suffix module to give us a path to
* modify.
*/
Lst path;
specType = ExPath;
path = Suff_GetPath(&line[5]);
if (path == NULL) {
Parse_Error(PARSE_FATAL,
"Suffix '%s' not defined (yet)",
&line[5]);
return;
} else {
Lst_AtEnd(&paths, path);
}
}
}
/*
* Have word in line. Get or create its node and stick it at
* the end of the targets list
*/
if (specType == Not && *line != '\0') {
char *targName;
if (Dir_HasWildcards(line)) {
/*
* Targets are to be sought only in the current directory,
* so create an empty path for the thing. Note we need to
* use Dir_Destroy in the destruction of the path as the
* Dir module could have added a directory to the path...
*/
LIST emptyPath;
LIST curTargs; /* list of target names to be found
* and added to the targets list */
Lst_Init(&emptyPath);
Lst_Init(&curTargs);
Dir_Expand(line, &emptyPath, &curTargs);
Lst_Destroy(&emptyPath, Dir_Destroy);
while ((targName = (char *)Lst_DeQueue(&curTargs)) != NULL) {
if (!Suff_IsTransform(targName))
gn = Targ_FindNode(targName, TARG_CREATE);
else
gn = Suff_AddTransform(targName);
if (gn != NULL)
Array_AtEnd(>argets, gn);
}
Lst_Destroy(&curTargs, NOFREE);
} else {
if (!Suff_IsTransform(line))
gn = Targ_FindNode(line, TARG_CREATE);
else
gn = Suff_AddTransform(line);
if (gn != NULL)
Array_AtEnd(>argets, gn);
/* Don't need the list of target names anymore... */
}
} else if (specType == ExPath && *line != '.' && *line != '\0')
Parse_Error(PARSE_WARNING, "Extra target (%s) ignored", line);
*cp = savec;
/*
* If it is a special type and not .PATH, it's the only target we
* allow on this line...
*/
if (specType != Not && specType != ExPath) {
bool warn = false;
while (*cp != '!' && *cp != ':' && *cp) {
if (*cp != ' ' && *cp != '\t') {
warn = true;
}
cp++;
}
if (warn) {
Parse_Error(PARSE_WARNING, "Extra target ignored");
}
} else {
while (*cp && isspace(*cp)) {
cp++;
}
}
line = cp;
} while (*line != '!' && *line != ':' && *line);
if (!Array_IsEmpty(>argets)) {
switch (specType) {
default:
Parse_Error(PARSE_WARNING, "Special and mundane targets don't mix. Mundane ones ignored");
break;
case Default:
case Begin:
case End:
case Interrupt:
/* These four create nodes on which to hang commands, so
* targets shouldn't be empty... */
case Not:
/* Nothing special here -- targets can be empty if it wants. */
break;
}
}
/* Have now parsed all the target names. Must parse the operator next. The
* result is left in op . */
if (*cp == '!') {
op = OP_FORCE;
} else if (*cp == ':') {
if (cp[1] == ':') {
op = OP_DOUBLEDEP;
cp++;
} else {
op = OP_DEPENDS;
}
} else {
Parse_Error(PARSE_FATAL, "Missing dependency operator");
return;
}
cp++; /* Advance beyond operator */
Array_Find(>argets, ParseDoOp, op);
/*
* Get to the first source
*/
while (*cp && isspace(*cp)) {
cp++;
}
line = cp;
/*
* Several special targets take different actions if present with no
* sources:
* a .SUFFIXES line with no sources clears out all old suffixes
* a .PRECIOUS line makes all targets precious
* a .IGNORE line ignores errors for all targets
* a .SILENT line creates silence when making all targets
* a .PATH removes all directories from the search path(s).
*/
if (!*line) {
switch (specType) {
case Suffixes:
Suff_ClearSuffixes();
break;
case Precious:
allPrecious = true;
break;
case Ignore:
ignoreErrors = true;
break;
case Silent:
beSilent = true;
break;
case ExPath:
Lst_Every(&paths, ParseClearPath);
break;
default:
break;
}
} else if (specType == MFlags) {
/*
* Call on functions in main.c to deal with these arguments and
* set the initial character to a null-character so the loop to
* get sources won't get anything
*/
Main_ParseArgLine(line);
*line = '\0';
} else if (specType == ExShell) {
if (!Job_ParseShell(line)) {
Parse_Error(PARSE_FATAL, "improper shell specification");
return;
}
*line = '\0';
} else if (specType == NotParallel || specType == SingleShell) {
*line = '\0';
}
/*
* NOW GO FOR THE SOURCES
*/
if (specType == Suffixes || specType == ExPath ||
specType == Includes || specType == Libs ||
specType == Null) {
while (*line) {
/*
* If the target was one that doesn't take files as its sources
* but takes something like suffixes, we take each
* space-separated word on the line as a something and deal
* with it accordingly.
*
* If the target was .SUFFIXES, we take each source as a
* suffix and add it to the list of suffixes maintained by the
* Suff module.
*
* If the target was a .PATH, we add the source as a directory
* to search on the search path.
*
* If it was .INCLUDES, the source is taken to be the suffix of
* files which will be #included and whose search path should
* be present in the .INCLUDES variable.
*
* If it was .LIBS, the source is taken to be the suffix of
* files which are considered libraries and whose search path
* should be present in the .LIBS variable.
*
* If it was .NULL, the source is the suffix to use when a file
* has no valid suffix.
*/
char savec;
while (*cp && !isspace(*cp)) {
cp++;
}
savec = *cp;
*cp = '\0';
switch (specType) {
case Suffixes:
Suff_AddSuffix(line);
break;
case ExPath:
Lst_ForEach(&paths, ParseAddDir, line);
break;
case Includes:
Suff_AddInclude(line);
break;
case Libs:
Suff_AddLib(line);
break;
case Null:
Suff_SetNull(line);
break;
default:
break;
}
*cp = savec;
if (savec != '\0') {
cp++;
}
while (*cp && isspace(*cp)) {
cp++;
}
line = cp;
}
Lst_Destroy(&paths, NOFREE);
} else {
while (*line) {
/*
* The targets take real sources, so we must beware of archive
* specifications (i.e. things with left parentheses in them)
* and handle them accordingly.
*/
while (*cp && !isspace(*cp)) {
if (*cp == '(' && cp > line && cp[-1] != '$') {
/*
* Only stop for a left parenthesis if it isn't at the
* start of a word (that'll be for variable changes
* later) and isn't preceded by a dollar sign (a dynamic
* source).
*/
break;
} else {
cp++;
}
}
if (*cp == '(') {
GNode *gn;
LIST sources; /* list of archive source names after
* expansion */
Lst_Init(&sources);
if (!Arch_ParseArchive(&line, &sources, NULL)) {
Parse_Error(PARSE_FATAL,
"Error in source archive spec \"%s\"", line);
return;
}
while ((gn = (GNode *)Lst_DeQueue(&sources)) != NULL)
ParseDoSrc(tOp, gn->name);
cp = line;
} else {
if (*cp) {
*cp = '\0';
cp += 1;
}
ParseDoSrc(tOp, line);
}
while (*cp && isspace(*cp)) {
cp++;
}
line = cp;
}
}
if (mainNode == NULL) {
/* If we have yet to decide on a main target to make, in the
* absence of any user input, we want the first target on
* the first dependency line that is actually a real target
* (i.e. isn't a .USE or .EXEC rule) to be made. */
Array_Find(>argets, ParseFindMain, NULL);
}
/* Finally, destroy the list of sources. */
}
/*-
* ParseAddCmd --
* Lst_ForEach function to add a command line to all targets
*
* Side Effects:
* A new element is added to the commands list of the node.
*/
static void
ParseAddCmd(gnp, cmd)
void *gnp; /* the node to which the command is to be added */
void *cmd; /* the command to add */
{
GNode *gn = (GNode *)gnp;
/* if target already supplied, ignore commands */
if (!(gn->type & OP_HAS_COMMANDS)) {
Lst_AtEnd(&gn->commands, cmd);
if (!gn->lineno) {
gn->lineno = Parse_Getlineno();
gn->fname = Parse_Getfilename();
}
}
}
/*-
*-----------------------------------------------------------------------
* ParseHasCommands --
* Callback procedure for Parse_File when destroying the list of
* targets on the last dependency line. Marks a target as already
* having commands if it does, to keep from having shell commands
* on multiple dependency lines.
*
* Side Effects:
* OP_HAS_COMMANDS may be set for the target.
*-----------------------------------------------------------------------
*/
static void
ParseHasCommands(gnp)
void *gnp; /* Node to examine */
{
GNode *gn = (GNode *)gnp;
if (!Lst_IsEmpty(&gn->commands)) {
gn->type |= OP_HAS_COMMANDS;
}
}
/*-
*-----------------------------------------------------------------------
* Parse_AddIncludeDir --
* Add a directory to the path searched for included makefiles
* bracketed by double-quotes. Used by functions in main.c
*-----------------------------------------------------------------------
*/
void
Parse_AddIncludeDir(dir)
const char *dir; /* The name of the directory to add */
{
Dir_AddDir(parseIncPath, dir);
}
/*-
*---------------------------------------------------------------------
* ParseDoInclude --
* Push to another file.
*
* The input is the line minus the #include. A file spec is a string
* enclosed in <> or "". The former is looked for only in sysIncPath.
* The latter in . and the directories specified by -I command line
* options
*
* Side Effects:
* old parse context is pushed on the stack, new file becomes
* current context.
*---------------------------------------------------------------------
*/
static void
ParseDoInclude(file)
char *file; /* file specification */
{
char endc; /* the character which ends the file spec */
char *cp; /* current position in file spec */
bool isSystem; /* true if makefile is a system makefile */
/* Skip to delimiter character so we know where to look. */
while (*file == ' ' || *file == '\t')
file++;
if (*file != '"' && *file != '<') {
Parse_Error(PARSE_FATAL,
".include filename must be delimited by '\"' or '<'");
return;
}
/* Set the search path on which to find the include file based on the
* characters which bracket its name. Angle-brackets imply it's
* a system Makefile while double-quotes imply it's a user makefile */
if (*file == '<') {
isSystem = true;
endc = '>';
} else {
isSystem = false;
endc = '"';
}
/* Skip to matching delimiter. */
for (cp = ++file; *cp != endc; cp++) {
if (*cp == '\0') {
Parse_Error(PARSE_FATAL,
"Unclosed %cinclude filename. '%c' expected",
'.', endc);
return;
}
}
ParseLookupIncludeFile(file, cp, isSystem, true);
}
/*-
*---------------------------------------------------------------------
* ParseTraditionalInclude --
* Push to another file.
*
* The input is the line minus the "include". The file name is
* the string following the "include".
*
* Side Effects:
* old parse context is pushed on the stack, new file becomes
* current context.
*
* XXX May wish to support multiple files and wildcards ?
*---------------------------------------------------------------------
*/
static void
ParseTraditionalInclude(file)
char *file; /* file specification */
{
char *cp; /* current position in file spec */
/* Skip over whitespace. */
while (isspace(*file))
file++;
if (*file == '\0') {
Parse_Error(PARSE_FATAL,
"Filename missing from \"include\"");
return;
}
/* Skip to end of line or next whitespace. */
for (cp = file; *cp != '\0' && !isspace(*cp);)
cp++;
ParseLookupIncludeFile(file, cp, true, true);
}
/*-
*---------------------------------------------------------------------
* ParseConditionalInclude --
* May push to another file.
*
* No error if the file does not exist.
* See ParseTraditionalInclude otherwise.
*---------------------------------------------------------------------
*/
static void
ParseConditionalInclude(file)
char *file; /* file specification */
{
char *cp; /* current position in file spec */
/* Skip over whitespace. */
while (isspace(*file))
file++;
if (*file == '\0') {
Parse_Error(PARSE_FATAL,
"Filename missing from \"include\"");
return;
}
/* Skip to end of line or next whitespace. */
for (cp = file; *cp != '\0' && !isspace(*cp);)
cp++;
ParseLookupIncludeFile(file, cp, true, false);
}
/* Common part to lookup and read an include file. */
static void
ParseLookupIncludeFile(spec, endSpec, isSystem, errIfNotFound)
char *spec;
char *endSpec;
bool isSystem;
bool errIfNotFound;
{
char *file;
char *fullname;
char endc;
/* Substitute for any variables in the file name before trying to
* find the thing. */
endc = *endSpec;
*endSpec = '\0';
file = Var_Subst(spec, NULL, false);
*endSpec = endc;
/* Now that we know the file name and its search path, we attempt to
* find the durn thing. NULL indicates the file still hasn't been
* found. */
fullname = NULL;
/* Handle non-system non-absolute files... */
if (!isSystem && file[0] != '/') {
/* ... by first searching relative to the including file's
* location. We don't want to cd there, of course, so we
* just tack on the old file's leading path components
* and call Dir_FindFile to see if we can locate the beast. */
char *slash;
const char *fname;
fname = Parse_Getfilename();
slash = strrchr(fname, '/');
if (slash != NULL) {
char *newName;
newName = Str_concati(fname, slash, file, strchr(file, '\0'), '/');
fullname = Dir_FindFile(newName, parseIncPath);
if (fullname == NULL)
fullname = Dir_FindFile(newName, dirSearchPath);
free(newName);
}
}
/* Now look first on the -I search path, then on the .PATH
* search path, if not found in a -I directory.
* XXX: Suffix specific? */
if (fullname == NULL)
fullname = Dir_FindFile(file, parseIncPath);
if (fullname == NULL)
fullname = Dir_FindFile(file, dirSearchPath);
/* Still haven't found the makefile. Look for it on the system
* path as a last resort. */
if (fullname == NULL)
fullname = Dir_FindFile(file, sysIncPath);
if (fullname == NULL && errIfNotFound)
Parse_Error(PARSE_FATAL, "Could not find %s", file);
free(file);
if (fullname != NULL) {
FILE *f;
f = fopen(fullname, "r");
if (f == NULL && errIfNotFound) {
Parse_Error(PARSE_FATAL, "Cannot open %s", fullname);
} else {
/* Once we find the absolute path to the file, we push the current
* stream to the includes stack, and start reading from the new
* file. We set up the file name to be its absolute name so that
* error messages are informative. */
Parse_FromFile(fullname, f);
}
}
}
/* Strip comments from the line. May return either a copy of the line, or
* the line itself. */
static char *
strip_comments(copy, line)
Buffer copy;
const char *line;
{
const char *comment;
const char *p;
comment = strchr(line, '#');
assert(comment != line);
if (comment == NULL)
return (char *)line;
else {
Buf_Reset(copy);
for (p = line; *p != '\0'; p++) {
if (*p == '\\') {
if (p[1] == '#') {
Buf_Addi(copy, line, p);
Buf_AddChar(copy, '#');
line = p+2;
}
if (p[1] != '\0')
p++;
} else if (*p == '#')
break;
}
Buf_Addi(copy, line, p);
Buf_KillTrailingSpaces(copy);
return Buf_Retrieve(copy);
}
}
static bool
ParseIsCond(linebuf, copy, line)
Buffer linebuf;
Buffer copy;
char *line;
{
char *stripped;
while (*line != '\0' && isspace(*line))
line++;
/* The line might be a conditional. Ask the conditional module
* about it and act accordingly. */
switch (Cond_Eval(line)) {
case COND_SKIP:
/* Skip to next conditional that evaluates to COND_PARSE. */
do {
line = Parse_ReadNextConditionalLine(linebuf);
if (line != NULL) {
while (*line != '\0' && isspace(*line))
line++;
stripped = strip_comments(copy, line);
}
} while (line != NULL && Cond_Eval(stripped) != COND_PARSE);
/* FALLTHROUGH */
case COND_PARSE:
return true;
default:
break;
}
{
For *loop;
loop = For_Eval(line);
if (loop != NULL) {
bool ok;
do {
/* Find the matching endfor. */
line = ParseReadLoopLine(linebuf);
if (line == NULL) {
Parse_Error(PARSE_FATAL,
"Unexpected end of file in for loop.\n");
return false;
}
ok = For_Accumulate(loop, line);
} while (ok);
For_Run(loop);
return true;
}
}
if (strncmp(line, "include", 7) == 0) {
ParseDoInclude(line + 7);
return true;
} else if (strncmp(line, "undef", 5) == 0) {
char *cp;
line+=5;
while (*line != '\0' && isspace(*line))
line++;
for (cp = line; !isspace(*cp) && *cp != '\0';)
cp++;
*cp = '\0';
Var_Delete(line);
return true;
}
return false;
}
/*-
*-----------------------------------------------------------------------
* ParseFinishDependency --
* Handle the end of a dependency group.
*
* Side Effects:
* 'targets' list destroyed.
*
*-----------------------------------------------------------------------
*/
static void
ParseFinishDependency()
{
Array_Every(>argets, Suff_EndTransform);
Array_Every(>argets, ParseHasCommands);
Array_Reset(>argets);
}
static void
ParseDoCommands(line)
const char *line;
{
/* add the command to the list of
* commands of all targets in the dependency spec */
char *cmd = estrdup(line);
Array_ForEach(>argets, ParseAddCmd, cmd);
#ifdef CLEANUP
Lst_AtEnd(&targCmds, cmd);
#endif
}
void
Parse_File(name, stream)
const char *name; /* the name of the file being read */
FILE *stream; /* Stream open to makefile to parse */
{
char *cp, /* pointer into the line */
*line; /* the line we're working on */
bool inDependency; /* true if currently in a dependency
* line or its commands */
BUFFER buf;
BUFFER copy;
Buf_Init(&buf, MAKE_BSIZE);
Buf_Init(©, MAKE_BSIZE);
inDependency = false;
Parse_FromFile(name, stream);
do {
while ((line = Parse_ReadNormalLine(&buf)) != NULL) {
if (*line == '\t') {
if (inDependency)
ParseDoCommands(line+1);
else
Parse_Error(PARSE_FATAL,
"Unassociated shell command \"%s\"",
line);
} else {
char *stripped;
stripped = strip_comments(©, line);
if (*stripped == '.' && ParseIsCond(&buf, ©, stripped+1))
;
else if (FEATURES(FEATURE_SYSVINCLUDE) &&
strncmp(stripped, "include", 7) == 0 &&
isspace(stripped[7]) &&
strchr(stripped, ':') == NULL) {
/* It's an S3/S5-style "include". */
ParseTraditionalInclude(stripped + 7);
} else if (FEATURES(FEATURE_CONDINCLUDE) &&
(*stripped == '-' || *stripped == 's') &&
strncmp(stripped+1, "include", 7) == 0 &&
isspace(stripped[8]) &&
strchr(stripped, ':') == NULL) {
ParseConditionalInclude(stripped+8);
} else {
char *dep;
if (inDependency)
ParseFinishDependency();
if (Parse_DoVar(stripped, VAR_GLOBAL))
inDependency = false;
else {
size_t pos;
char *end;
/* Need a new list for the target nodes. */
Array_Reset(>argets);
inDependency = true;
dep = NULL;
/* First we need to find eventual dependencies */
pos = strcspn(stripped, ":!");
/* go over :!, and find ; */
if (stripped[pos] != '\0' &&
(end = strchr(stripped+pos+1, ';')) != NULL) {
if (line != stripped)
/* find matching ; in original... The
* original might be slightly longer. */
dep = strchr(line+(end-stripped), ';');
else
dep = end;
/* kill end of line. */
*end = '\0';
}
/* We now know it's a dependency line so it needs to
* have all variables expanded before being parsed.
* Tell the variable module to complain if some
* variable is undefined... */
cp = Var_Subst(stripped, NULL, true);
ParseDoDependency(cp);
free(cp);
/* Parse dependency if it's not empty. */
if (dep != NULL) {
do {
dep++;
} while (isspace(*dep));
if (*dep != '\0')
ParseDoCommands(dep);
}
}
}
}
}
} while (Parse_NextFile());
if (inDependency)
ParseFinishDependency();
/* Make sure conditionals are clean. */
Cond_End();
Parse_ReportErrors();
Buf_Destroy(&buf);
Buf_Destroy(©);
}
void
Parse_Init()
{
mainNode = NULL;
Static_Lst_Init(parseIncPath);
Static_Lst_Init(sysIncPath);
Array_Init(&gsources, SOURCES_SIZE);
Array_Init(>argets, TARGETS_SIZE);
LowParse_Init();
#ifdef CLEANUP
Static_Lst_Init(&targCmds);
#endif
}
#ifdef CLEANUP
void
Parse_End()
{
Lst_Destroy(&targCmds, (SimpleProc)free);
Lst_Destroy(sysIncPath, Dir_Destroy);
Lst_Destroy(parseIncPath, Dir_Destroy);
LowParse_End();
}
#endif
void
Parse_MainName(listmain)
Lst listmain; /* result list */
{
if (mainNode == NULL) {
Punt("no target to make.");
/*NOTREACHED*/
} else if (mainNode->type & OP_DOUBLEDEP) {
Lst_AtEnd(listmain, mainNode);
Lst_Concat(listmain, &mainNode->cohorts);
}
else
Lst_AtEnd(listmain, mainNode);
}
![[BACK]](/icons/back.gif){kind=icon}
Return to parse.c CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / src / usr.bin / make