Annotation of src/usr.bin/pr/pr.c, Revision 1.29
1.29 ! jasper 1: /* $OpenBSD: pr.c,v 1.28 2009/10/27 23:59:41 deraadt Exp $ */
1.2 deraadt 2:
1.1 deraadt 3: /*-
4: * Copyright (c) 1991 Keith Muller.
5: * Copyright (c) 1993
6: * The Regents of the University of California. All rights reserved.
7: *
8: * This code is derived from software contributed to Berkeley by
9: * Keith Muller of the University of California, San Diego.
10: *
11: * Redistribution and use in source and binary forms, with or without
12: * modification, are permitted provided that the following conditions
13: * are met:
14: * 1. Redistributions of source code must retain the above copyright
15: * notice, this list of conditions and the following disclaimer.
16: * 2. Redistributions in binary form must reproduce the above copyright
17: * notice, this list of conditions and the following disclaimer in the
18: * documentation and/or other materials provided with the distribution.
1.16 millert 19: * 3. Neither the name of the University nor the names of its contributors
1.1 deraadt 20: * may be used to endorse or promote products derived from this software
21: * without specific prior written permission.
22: *
23: * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
24: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26: * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
27: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33: * SUCH DAMAGE.
34: */
35:
36: #include <sys/types.h>
37: #include <sys/time.h>
38: #include <sys/stat.h>
39:
40: #include <ctype.h>
41: #include <errno.h>
1.22 moritz 42: #include <limits.h>
1.1 deraadt 43: #include <signal.h>
44: #include <stdio.h>
1.12 deraadt 45: #include <stdarg.h>
1.1 deraadt 46: #include <stdlib.h>
47: #include <string.h>
48: #include <unistd.h>
49:
50: #include "pr.h"
51: #include "extern.h"
52:
53: /*
54: * pr: a printing and pagination filter. If multiple input files
55: * are specified, each is read, formatted, and written to standard
1.8 provos 56: * output. By default, input is separated into 66-line pages, each
1.1 deraadt 57: * with a header that includes the page number, date, time and the
58: * files pathname.
59: *
60: * Complies with posix P1003.2/D11
61: */
62:
63: /*
1.5 grr 64: * pr: more boundary conditions than a four-legged porcupine
65: *
66: * the original version didn't support form-feeds, while many of the ad-hoc
67: * pr implementations out there do. Addding this and making it work reasonably
68: * in all four output modes required quite a bit of hacking and a few minor
1.20 otto 69: * bugs were noted and fixed in the process. Some implementations have this
1.5 grr 70: * as the as -f, some as -F so we accept either.
71: *
1.12 deraadt 72: * The implementation of form feeds on top of the existing I/O structure is
1.20 otto 73: * a bit idiosyncratic. Basically they are treated as temporary end-of-file
1.5 grr 74: * conditions and an additional level of "loop on form feed" is added to each
75: * of the output modes to continue after such a transient end-of-file's. This
76: * has the general benefit of making the existing header/trailer logic work
77: * and provides a usable framework for rational behavior in multi-column modes.
78: *
1.20 otto 79: * The original "efficient" implementation of the "skip to page N" option was
1.5 grr 80: * bogus and I substituted the basic inhibit printing until page N approach.
81: * This is still fairly bogus vis-a-vis numbering pages on multiple files
1.20 otto 82: * restarting at one, but at least lets you consistently reprint some large
1.5 grr 83: * document starting in the middle, in any of the output modes.
84: *
85: * Additional support for overprinting via <back-space> or <return> would
86: * be nice, but is not trivial across tab interpretation, output formatting
87: * and the different operating modes. Support for line-wrapping, either
88: * strict or word-wrapped would be really useful and not all that hard to
89: * kludge into the inln() implementation. The general notion is that -wc n
90: * would specify width and wrapping with a marker character c and -Wc n
91: * would add word wrapping with a minimum width n and delimiters c, defaulting
92: * to tab, blank, and -, and column width. Word wrapping always involves
93: * painful policy questions which are difficult to specify unless you just
94: * hardwire in some fixed rules. Think quotes, punctuation and white-space
95: * elimination and whether you'd do the same thing with a C program and
96: * something like columninated newspaper text.
97: *
98: * George Robbins <grr@tharsis.com> 4/22/97.
99: */
100:
101: /*
1.1 deraadt 102: * parameter variables
103: */
1.5 grr 104: int pgnm; /* starting page number */
105: int skipping; /* we're skipping to page pgnum */
106: int clcnt; /* number of columns */
107: int colwd; /* column data width - multiple columns */
108: int across; /* mult col flag; write across page */
109: int dspace; /* double space flag */
110: char inchar; /* expand input char */
111: int ingap; /* expand input gap */
112: int formfeed; /* use formfeed as trailer */
113: int inform; /* grok formfeeds in input */
114: char *header; /* header name instead of file name */
115: char ochar; /* contract output char */
116: int ogap; /* contract output gap */
117: int lines; /* number of lines per page */
118: int merge; /* merge multiple files in output */
119: char nmchar; /* line numbering append char */
120: int nmwd; /* width of line number field */
121: int offst; /* number of page offset spaces */
122: int nodiag; /* do not report file open errors */
123: char schar; /* text column separation character */
124: int sflag; /* -s option for multiple columns */
125: int nohead; /* do not write head and trailer */
126: int pgwd; /* page width with multiple col output */
127: char *timefrmt; /* time conversion string */
1.1 deraadt 128:
129: /*
130: * misc globals
131: */
1.22 moritz 132: volatile sig_atomic_t ferr; /* error message delayed */
1.5 grr 133: int addone = 0; /* page length is odd with double space */
134: int errcnt = 0; /* error count on file processing */
135: int beheaded = 0; /* header / trailer link */
1.1 deraadt 136: char digs[] = "0123456789"; /* page number translation map */
137:
138: int
1.17 deraadt 139: main(int argc, char *argv[])
1.1 deraadt 140: {
1.5 grr 141: int ret_val;
1.1 deraadt 142:
1.5 grr 143: if (signal(SIGINT, SIG_IGN) != SIG_IGN)
144: (void)signal(SIGINT, terminate);
145: ret_val = setup(argc, argv);
146: if (!ret_val) {
147: /*
148: * select the output format based on options
149: */
150: if (merge)
151: ret_val = mulfile(argc, argv);
152: else if (clcnt == 1)
153: ret_val = onecol(argc, argv);
154: else if (across)
155: ret_val = horzcol(argc, argv);
156: else
157: ret_val = vertcol(argc, argv);
158: } else
159: usage();
160: flsh_errs();
161: if (errcnt || ret_val)
162: exit(1);
163: return(0);
1.1 deraadt 164: }
165:
166: /*
1.5 grr 167: * onecol: print files with only one column of output.
168: * Line length is unlimited.
1.1 deraadt 169: */
170: int
1.18 deraadt 171: onecol(int argc, char *argv[])
1.1 deraadt 172: {
1.13 mpech 173: int off;
174: int lrgln;
175: int linecnt;
176: int num;
1.5 grr 177: int cnt;
178: int rc;
179: int lncnt;
180: int pagecnt;
181: int ips;
182: int ops;
183: int cps;
1.29 ! jasper 184: char *obuf = NULL;
1.5 grr 185: char *lbuf;
186: char *nbuf;
1.29 ! jasper 187: char *hbuf = NULL;
1.5 grr 188: char *ohbuf;
189: FILE *inf;
190: char *fname;
191: int mor;
1.29 ! jasper 192: int error = 1;
1.5 grr 193:
194: if (nmwd)
195: num = nmwd + 1;
196: else
197: num = 0;
198: off = num + offst;
199:
200: /*
201: * allocate line buffer
202: */
1.29 ! jasper 203: if ((obuf = malloc((unsigned)(LBUF + off)*sizeof(char))) == NULL)
! 204: goto oomem;
1.5 grr 205:
206: /*
207: * allocate header buffer
208: */
1.29 ! jasper 209: if ((hbuf = malloc((unsigned)(HDBUF + offst)*sizeof(char))) == NULL)
! 210: goto oomem;
1.5 grr 211:
212: ohbuf = hbuf + offst;
213: nbuf = obuf + offst;
214: lbuf = nbuf + num;
215:
216: if (num)
217: nbuf[--num] = nmchar;
218:
219: if (offst) {
220: (void)memset(obuf, (int)' ', offst);
221: (void)memset(hbuf, (int)' ', offst);
222: }
223:
224: /*
225: * loop by file
226: */
227: while ((inf = nxtfile(argc, argv, &fname, ohbuf, 0)) != NULL) {
228: pagecnt = 0;
229: lncnt = 0;
1.1 deraadt 230:
231: /*
1.5 grr 232: * loop by "form"
1.1 deraadt 233: */
1.5 grr 234: for(;;) {
1.1 deraadt 235:
1.5 grr 236: /*
237: * loop by page
238: */
239: for(;;) {
240: linecnt = 0;
241: lrgln = 0;
242: ops = 0;
243: ips = 0;
244: cps = 0;
1.1 deraadt 245:
246: /*
1.5 grr 247: * loop by line
1.1 deraadt 248: */
1.5 grr 249: while (linecnt < lines) {
250:
251: /*
252: * input next line
253: */
254: rc = inln(inf,lbuf,LBUF,&cnt,&cps,0,&mor);
255: if (cnt >= 0) {
256: if (!lrgln)
257: if (!linecnt && prhead(hbuf, fname, ++pagecnt))
1.29 ! jasper 258: goto out;
1.5 grr 259:
260: /*
261: * start new line or continue a long one
262: */
263: if (!lrgln) {
264: if (num)
265: addnum(nbuf, num, ++lncnt);
266: if (otln(obuf,cnt+off, &ips, &ops, mor))
1.29 ! jasper 267: goto out;
1.5 grr 268: } else
269: if (otln(lbuf, cnt, &ips, &ops, mor))
1.29 ! jasper 270: goto out;
1.1 deraadt 271:
272: /*
1.5 grr 273: * if line bigger than buffer, get more
1.1 deraadt 274: */
1.5 grr 275: if (mor) {
276: lrgln = 1;
277: } else {
278: /*
279: * whole line rcvd. reset tab proc. state
280: */
281: ++linecnt;
282: lrgln = 0;
283: ops = 0;
284: ips = 0;
285: }
286: }
1.1 deraadt 287:
1.5 grr 288: if (rc != NORMAL)
289: break;
290: }
1.1 deraadt 291:
1.5 grr 292: /*
293: * fill to end of page
294: */
295: if (prtail(lines - linecnt, lrgln))
1.29 ! jasper 296: goto out;
1.1 deraadt 297:
1.5 grr 298: /*
299: * unless END continue
300: */
301: if (rc == END)
302: break;
303: }
304:
305: /*
306: * On EOF go to next file
307: */
308: if (rc == END)
309: break;
310: }
311:
312: if (inf != stdin)
313: (void)fclose(inf);
314: }
315: /*
316: * If we didn't process all the files, return error
317: */
1.29 ! jasper 318: if (eoptind < argc) {
! 319: goto out;
! 320: } else {
! 321: error = 0;
! 322: goto out;
! 323: }
! 324:
! 325: oomem:
! 326: mfail();
! 327: out:
! 328: free(obuf);
! 329: free(hbuf);
! 330: if (inf != NULL && inf != stdin)
! 331: (void)fclose(inf);
! 332: return error;
1.1 deraadt 333: }
334:
335: /*
336: * vertcol: print files with more than one column of output down a page
1.5 grr 337: * the general approach is to buffer a page of data, then print
1.1 deraadt 338: */
339: int
1.18 deraadt 340: vertcol(int argc, char *argv[])
1.1 deraadt 341: {
1.13 mpech 342: char *ptbf;
1.29 ! jasper 343: char **lstdat = NULL;
1.13 mpech 344: int i;
345: int j;
346: int pln;
1.29 ! jasper 347: int *indy = NULL;
1.5 grr 348: int cnt;
349: int rc;
350: int cvc;
1.29 ! jasper 351: int *lindy = NULL;
1.5 grr 352: int lncnt;
353: int stp;
354: int pagecnt;
355: int col = colwd + 1;
356: int mxlen = pgwd + offst + 1;
357: int mclcnt = clcnt - 1;
1.29 ! jasper 358: struct vcol *vc = NULL;
1.5 grr 359: int mvc;
360: int tvc;
361: int cw = nmwd + 1;
362: int fullcol;
1.29 ! jasper 363: char *buf = NULL;
! 364: char *hbuf = NULL;
1.5 grr 365: char *ohbuf;
366: char *fname;
1.29 ! jasper 367: FILE *inf = NULL;
1.5 grr 368: int ips = 0;
369: int cps = 0;
370: int ops = 0;
371: int mor = 0;
1.29 ! jasper 372: int error = 1;
1.5 grr 373:
374: /*
375: * allocate page buffer
376: */
1.29 ! jasper 377: if ((buf = calloc((unsigned)lines, mxlen)) == NULL)
! 378: goto oomem;
1.5 grr 379:
380: /*
381: * allocate page header
382: */
1.29 ! jasper 383: if ((hbuf = malloc((unsigned)HDBUF + offst)) == NULL)
! 384: goto oomem;
1.5 grr 385:
386: ohbuf = hbuf + offst;
387: if (offst)
388: (void)memset(hbuf, (int)' ', offst);
389:
390: /*
391: * col pointers when no headers
392: */
393: mvc = lines * clcnt;
1.29 ! jasper 394: if ((vc=(struct vcol *)calloc((unsigned)mvc, sizeof(struct vcol))) == NULL)
! 395: goto oomem;
1.5 grr 396:
397: /*
398: * pointer into page where last data per line is located
399: */
1.29 ! jasper 400: if ((lstdat = (char **)calloc((unsigned)lines, sizeof(char *))) == NULL)
! 401: goto oomem;
1.5 grr 402:
403: /*
404: * fast index lookups to locate start of lines
405: */
1.29 ! jasper 406: if ((indy = (int *)calloc((unsigned)lines, sizeof(int))) == NULL)
! 407: goto oomem;
! 408: if ((lindy = (int *)calloc((unsigned)lines, sizeof(int))) == NULL)
! 409: goto oomem;
1.5 grr 410:
411: if (nmwd)
412: fullcol = col + cw;
413: else
414: fullcol = col;
415:
416: /*
417: * initialize buffer lookup indexes and offset area
418: */
419: for (j = 0; j < lines; ++j) {
420: lindy[j] = j * mxlen;
421: indy[j] = lindy[j] + offst;
422: if (offst) {
423: ptbf = buf + lindy[j];
424: (void)memset(ptbf, (int)' ', offst);
425: ptbf += offst;
426: } else
427: ptbf = buf + indy[j];
428: lstdat[j] = ptbf;
429: }
430:
431: /*
432: * loop by file
433: */
434: while ((inf = nxtfile(argc, argv, &fname, ohbuf, 0)) != NULL) {
435: pagecnt = 0;
436: lncnt = 0;
1.1 deraadt 437:
438: /*
1.5 grr 439: * loop by "form"
1.1 deraadt 440: */
1.5 grr 441: for (;;) {
1.1 deraadt 442:
1.5 grr 443: /*
444: * loop by page
445: */
446: for(;;) {
1.1 deraadt 447:
1.5 grr 448: /*
449: * loop by column
450: */
451: cvc = 0;
452: for (i = 0; i < clcnt; ++i) {
453: j = 0;
454: /*
455: * if last column, do not pad
456: */
457: if (i == mclcnt)
458: stp = 1;
459: else
460: stp = 0;
461:
462: /*
463: * loop by line
464: */
465: for(;;) {
466: /*
467: * is this first column
468: */
469: if (!i) {
470: ptbf = buf + indy[j];
471: lstdat[j] = ptbf;
472: } else
473: ptbf = lstdat[j];
474: vc[cvc].pt = ptbf;
1.1 deraadt 475:
476: /*
1.5 grr 477: * add number
1.1 deraadt 478: */
1.5 grr 479: if (nmwd) {
480: addnum(ptbf, nmwd, ++lncnt);
481: ptbf += nmwd;
482: *ptbf++ = nmchar;
483: }
1.1 deraadt 484:
485: /*
1.5 grr 486: * input next line
1.1 deraadt 487: */
1.5 grr 488: rc = inln(inf,ptbf,colwd,&cnt,&cps,1,&mor);
489: vc[cvc++].cnt = cnt;
490: if (cnt >= 0) {
491: ptbf += cnt;
492:
493: /*
494: * pad all but last column on page
495: */
496: if (!stp) {
1.1 deraadt 497: /*
1.5 grr 498: * pad to end of column
1.1 deraadt 499: */
1.5 grr 500: if (sflag)
501: *ptbf++ = schar;
502: else if ((pln = col-cnt) > 0) {
503: (void)memset(ptbf,
504: (int)' ',pln);
505: ptbf += pln;
1.1 deraadt 506: }
1.5 grr 507: }
508:
509: /*
510: * remember last char in line
511: */
512: lstdat[j] = ptbf;
513: if (++j >= lines)
514: break;
515: } /* end of if cnt >= 0 */
516:
517: if (rc != NORMAL)
518: break;
519: } /* end of for line */
520:
521: if (rc != NORMAL)
522: break;
523: } /* end of for column */
524:
525: /*
526: * when -t (no header) is specified the spec requires
527: * the min number of lines. The last page may not have
528: * balanced length columns. To fix this we must reorder
529: * the columns. This is a very slow technique so it is
530: * only used under limited conditions. Without -t, the
531: * balancing of text columns is unspecified. To NOT
532: * balance the last page, add the global variable
533: * nohead to the if statement below e.g.
534: */
1.1 deraadt 535:
1.5 grr 536: /*
537: * print header iff we got anything on the first read
538: */
539: if (vc[0].cnt >= 0) {
540: if (prhead(hbuf, fname, ++pagecnt))
1.29 ! jasper 541: goto out;
1.5 grr 542:
543: /*
544: * check to see if "last" page needs to be reordered
545: */
546: --cvc;
547: if ((rc != NORMAL) && cvc && ((mvc-cvc) >= clcnt)){
548: pln = cvc/clcnt;
549: if (cvc % clcnt)
550: ++pln;
1.1 deraadt 551:
1.5 grr 552: for (i = 0; i < pln; ++i) {
553: ips = 0;
554: ops = 0;
555: if (offst && otln(buf,offst,&ips,&ops,1))
1.29 ! jasper 556: goto out;
1.5 grr 557: tvc = i;
1.1 deraadt 558:
1.5 grr 559: for (j = 0; j < clcnt; ++j) {
1.1 deraadt 560: /*
1.5 grr 561: * determine column length
1.1 deraadt 562: */
1.5 grr 563: if (j == mclcnt) {
564: /*
565: * last column
566: */
567: cnt = vc[tvc].cnt;
568: if (nmwd)
569: cnt += cw;
570: } else if (sflag) {
571: /*
572: * single ch between
573: */
574: cnt = vc[tvc].cnt + 1;
575: if (nmwd)
576: cnt += cw;
577: } else
578: cnt = fullcol;
579:
580: if (otln(vc[tvc].pt, cnt, &ips, &ops, 1))
1.29 ! jasper 581: goto out;
1.5 grr 582: tvc += pln;
583: if (tvc > cvc)
584: break;
585: }
586: /*
587: * terminate line
588: */
589: if (otln(buf, 0, &ips, &ops, 0))
1.29 ! jasper 590: goto out;
1.1 deraadt 591: }
592:
1.5 grr 593: } else {
594:
1.1 deraadt 595: /*
1.5 grr 596: * just a normal page...
1.1 deraadt 597: * determine how many lines to output
598: */
599: if (i > 0)
1.5 grr 600: pln = lines;
1.1 deraadt 601: else
1.5 grr 602: pln = j;
1.1 deraadt 603:
604: /*
605: * output each line
606: */
607: for (i = 0; i < pln; ++i) {
1.5 grr 608: ptbf = buf + lindy[i];
609: if ((j = lstdat[i] - ptbf) <= offst)
610: break;
611: else {
612: ips = 0;
613: ops = 0;
1.1 deraadt 614: if (otln(ptbf, j, &ips, &ops, 0))
1.29 ! jasper 615: goto out;
1.5 grr 616: }
1.1 deraadt 617: }
1.5 grr 618: }
619: }
1.1 deraadt 620:
1.5 grr 621: /*
622: * pad to end of page
623: */
624: if (prtail((lines - pln), 0))
1.29 ! jasper 625: goto out;
1.1 deraadt 626:
1.5 grr 627: /*
628: * if FORM continue
629: */
630: if (rc != NORMAL)
631: break;
632: }
633:
634: /*
635: * if EOF go to next file
636: */
637: if (rc == END)
638: break;
1.1 deraadt 639: }
1.5 grr 640:
641: if (inf != stdin)
642: (void)fclose(inf);
643: }
644:
1.29 ! jasper 645: if (eoptind < argc){
! 646: goto out;
! 647: } else {
! 648: error = 0;
! 649: goto out;
! 650: }
! 651:
! 652: oomem:
! 653: mfail();
! 654: out:
! 655: free(buf);
! 656: free(hbuf);
! 657: free(vc);
! 658: free(lstdat);
! 659: free(lindy);
! 660: if (inf != NULL && inf != stdin)
! 661: (void)fclose(inf);
! 662: return error;
! 663:
1.1 deraadt 664: }
665:
666: /*
1.5 grr 667: * horzcol: print files with more than one column of output across a page
1.1 deraadt 668: */
669: int
1.18 deraadt 670: horzcol(int argc, char *argv[])
1.1 deraadt 671: {
1.13 mpech 672: char *ptbf;
673: int pln;
674: char *lstdat;
675: int col = colwd + 1;
676: int j;
677: int i;
1.5 grr 678: int cnt;
679: int rc;
680: int lncnt;
681: int pagecnt;
1.29 ! jasper 682: char *buf = NULL;
! 683: char *hbuf = NULL;
1.5 grr 684: char *ohbuf;
685: char *fname;
1.29 ! jasper 686: FILE *inf = NULL;
1.5 grr 687: int cps = 0;
688: int mor = 0;
689: int ips = 0;
690: int ops = 0;
1.29 ! jasper 691: int error = 1;
1.5 grr 692:
1.29 ! jasper 693: if ((buf = malloc((unsigned)pgwd + offst + 1)) == NULL)
! 694: goto oomem;
1.5 grr 695:
696: /*
697: * page header
698: */
1.29 ! jasper 699: if ((hbuf = malloc((unsigned)HDBUF + offst)) == NULL)
! 700: goto oomem;
1.5 grr 701:
702: ohbuf = hbuf + offst;
703: if (offst) {
704: (void)memset(buf, (int)' ', offst);
705: (void)memset(hbuf, (int)' ', offst);
706: }
707:
708: /*
709: * loop by file
710: */
711: while ((inf = nxtfile(argc, argv, &fname, ohbuf, 0)) != NULL) {
712: pagecnt = 0;
713: lncnt = 0;
1.1 deraadt 714:
715: /*
1.5 grr 716: * loop by form
1.1 deraadt 717: */
1.5 grr 718: for (;;) {
1.1 deraadt 719:
1.5 grr 720: /*
721: * loop by page
722: */
723: for(;;) {
1.1 deraadt 724:
725: /*
1.5 grr 726: * loop by line
1.1 deraadt 727: */
1.5 grr 728: for (i = 0; i < lines; ++i) {
729: ptbf = buf + offst;
730: lstdat = ptbf;
731: j = 0;
732:
733: /*
734: * loop by col
735: */
736: for(;;) {
737: if (nmwd) {
738: /*
739: * add number to column
740: */
741: addnum(ptbf, nmwd, ++lncnt);
742: ptbf += nmwd;
743: *ptbf++ = nmchar;
744: }
745: /*
746: * input line
747: */
748: rc = inln(inf,ptbf,colwd,&cnt,&cps,1, &mor);
749: if (cnt >= 0) {
750: if (!i && !j && prhead(hbuf, fname, ++pagecnt))
1.29 ! jasper 751: goto out;
1.5 grr 752:
753: ptbf += cnt;
754: lstdat = ptbf;
755:
756: /*
757: * if last line skip padding
758: */
759: if (++j >= clcnt)
760: break;
761:
762: /*
763: * pad to end of column
764: */
765: if (sflag)
766: *ptbf++ = schar;
767: else if ((pln = col - cnt) > 0) {
768: (void)memset(ptbf,(int)' ',pln);
769: ptbf += pln;
770: }
771: }
772: if (rc != NORMAL)
773: break;
774: }
775:
776: /*
777: * output line if any columns on it
778: */
779: if (j) {
780: if (otln(buf, lstdat-buf, &ips, &ops, 0))
1.29 ! jasper 781: goto out;
1.5 grr 782: }
1.1 deraadt 783:
1.5 grr 784: if (rc != NORMAL)
785: break;
786: }
1.1 deraadt 787:
1.5 grr 788: /*
789: * pad to end of page
790: */
791: if (prtail(lines - i, 0))
792: return(1);
1.1 deraadt 793:
1.5 grr 794: /*
795: * if FORM continue
796: */
797: if (rc == END)
798: break;
799: }
800: /*
801: * if EOF go to next file
802: */
803: if (rc == END)
804: break;
1.1 deraadt 805: }
1.5 grr 806: if (inf != stdin)
807: (void)fclose(inf);
808: }
1.29 ! jasper 809: if (eoptind < argc){
! 810: goto out;
! 811: } else {
! 812: error = 0;
! 813: goto out;
! 814: }
! 815:
! 816: oomem:
! 817: mfail();
! 818: out:
! 819: free(buf);
! 820: free(hbuf);
! 821: if (inf != NULL && inf != stdin)
! 822: (void)fclose(inf);
! 823: return error;
1.1 deraadt 824: }
825:
1.12 deraadt 826: struct ferrlist {
827: struct ferrlist *next;
828: char *buf;
829: };
830: struct ferrlist *ferrhead, *ferrtail;
831:
832: /*
833: * flsh_errs(): output saved up diagnostic messages after all normal
834: * processing has completed
835: */
836: void
1.18 deraadt 837: flsh_errs(void)
1.12 deraadt 838: {
839: struct ferrlist *f;
840:
841: if (ferr) {
842: for (f = ferrhead; f; f = f->next)
843: (void)write(STDERR_FILENO, f->buf, strlen(f->buf));
844: }
845: }
846:
1.19 deraadt 847: static void
1.12 deraadt 848: ferrout(char *fmt, ...)
849: {
850: sigset_t block, oblock;
851: struct ferrlist *f;
852: va_list ap;
853: char *p;
854:
855: va_start(ap, fmt);
1.21 avsm 856: if (ferr == 0)
1.12 deraadt 857: vfprintf(stderr, fmt, ap);
858: else {
859: sigemptyset(&block);
860: sigaddset(&block, SIGINT);
861: sigprocmask(SIG_BLOCK, &block, &oblock);
862:
1.26 tobias 863: if (vasprintf(&p, fmt, ap) == -1 || (f = malloc(sizeof(*f))) == NULL) {
864: flsh_errs();
865: fprintf(stderr, fmt, ap);
866: fputs("pr: memory allocation failed\n", stderr);
867: exit(1);
868: }
869:
1.12 deraadt 870: f->next = NULL;
871: f->buf = p;
872: if (ferrhead == NULL)
873: ferrhead = f;
874: if (ferrtail)
875: ferrtail->next = f;
876: ferrtail = f;
877: sigprocmask(SIG_SETMASK, &oblock, NULL);
878: }
1.14 mpech 879: va_end(ap);
1.12 deraadt 880: }
881:
1.1 deraadt 882: /*
1.5 grr 883: * mulfile: print files with more than one column of output and
884: * more than one file concurrently
1.1 deraadt 885: */
886: int
1.18 deraadt 887: mulfile(int argc, char *argv[])
1.1 deraadt 888: {
1.13 mpech 889: char *ptbf;
890: int j;
891: int pln;
1.5 grr 892: int *rc;
893: int cnt;
1.13 mpech 894: char *lstdat;
895: int i;
1.29 ! jasper 896: FILE **fbuf = NULL;
1.5 grr 897: int actf;
898: int lncnt;
899: int col;
900: int pagecnt;
901: int fproc;
1.29 ! jasper 902: char *buf = NULL;
! 903: char *hbuf = NULL;
1.5 grr 904: char *ohbuf;
905: char *fname;
906: int ips = 0;
907: int cps = 0;
908: int ops = 0;
909: int mor = 0;
1.29 ! jasper 910: int error = 1;
1.5 grr 911:
912: /*
913: * array of FILE *, one for each operand
914: */
1.29 ! jasper 915: if ((fbuf = (FILE **)calloc((unsigned)clcnt, sizeof(FILE *))) == NULL)
! 916: goto oomem;
1.5 grr 917:
918: /*
919: * array of int *, one for each operand
920: */
1.29 ! jasper 921: if ((rc = (int *)calloc((unsigned)clcnt, sizeof(int))) == NULL)
! 922: goto oomem;
1.5 grr 923:
924: /*
925: * page header
926: */
1.29 ! jasper 927: if ((hbuf = malloc((unsigned)HDBUF + offst)) == NULL)
! 928: goto oomem;
! 929:
1.5 grr 930: ohbuf = hbuf + offst;
931:
932: /*
933: * do not know how many columns yet. The number of operands provide an
934: * upper bound on the number of columns. We use the number of files
935: * we can open successfully to set the number of columns. The operation
1.20 otto 936: * of the merge operation (-m) in relation to unsuccessful file opens
1.5 grr 937: * is unspecified by posix.
938: *
939: * XXX - this seems moderately bogus, you'd think that specifying
940: * "pr -2 a b c d" would run though all the files in pairs, but
941: * the existing code says up two files, or fewer if one is bogus.
942: * fixing it would require modifying the looping structure, so be it.
943: */
944: j = 0;
945: while (j < clcnt) {
946: if ((fbuf[j] = nxtfile(argc, argv, &fname, ohbuf, 1)) != NULL) {
947: rc[j] = NORMAL;
948: j++;
949: }
950: }
951:
952: /*
953: * if no files, exit
954: */
955: if (j)
1.1 deraadt 956: clcnt = j;
1.5 grr 957: else
1.29 ! jasper 958: goto out;
1.1 deraadt 959:
1.5 grr 960: /*
1.20 otto 961: * calculate page boundaries based on open file count
1.5 grr 962: */
963: if (nmwd) {
964: colwd = (pgwd - clcnt - nmwd)/clcnt;
965: pgwd = ((colwd + 1) * clcnt) - nmwd - 2;
966: } else {
967: colwd = (pgwd + 1 - clcnt)/clcnt;
968: pgwd = ((colwd + 1) * clcnt) - 1;
969: }
970: if (colwd < 1) {
1.12 deraadt 971: ferrout("pr: page width too small for %d columns\n", clcnt);
1.29 ! jasper 972: goto out;
1.5 grr 973: }
974: col = colwd + 1;
975:
976: /*
977: * line buffer
978: */
1.29 ! jasper 979: if ((buf = malloc((unsigned)pgwd + offst + 1)) == NULL)
! 980: goto oomem;
! 981:
1.5 grr 982: if (offst) {
983: (void)memset(buf, (int)' ', offst);
984: (void)memset(hbuf, (int)' ', offst);
985: }
986:
987: pagecnt = 0;
988: lncnt = 0;
989: actf = clcnt;
990:
991: /*
992: * continue to loop while any file still has data
993: */
994: while (actf > 0) {
995:
996: /*
997: * loop on "form"
998: */
999: for (;;) {
1000:
1001: /*
1002: * loop by line
1003: */
1004: for (i = 0; i < lines; ++i) {
1005: ptbf = buf + offst;
1006: lstdat = ptbf;
1007: if (nmwd) {
1008: /*
1009: * add line number to line
1010: */
1011: addnum(ptbf, nmwd, ++lncnt);
1012: ptbf += nmwd;
1013: *ptbf++ = nmchar;
1014: }
1.1 deraadt 1015:
1.5 grr 1016: fproc = 0;
1.1 deraadt 1017: /*
1.5 grr 1018: * loop by column
1.1 deraadt 1019: */
1.5 grr 1020: for (j = 0; j < clcnt; ++j) {
1021: if (rc[j] == NORMAL ) {
1022: rc[j] = inln(fbuf[j], ptbf, colwd, &cnt, &cps, 1, &mor);
1023: if (cnt >= 0) {
1024: /*
1025: * process file data
1026: */
1027: ptbf += cnt;
1028: lstdat = ptbf;
1029: fproc++;
1030: } else
1031: cnt = 0;
1032:
1033: if (rc[j] == END) {
1034: /*
1035: * EOF close file
1036: */
1037: if (fbuf[j] != stdin)
1038: (void)fclose(fbuf[j]);
1039: --actf;
1040: }
1041: } else
1042: cnt = 0;
1043:
1044: /*
1045: * if last ACTIVE column, done with line
1046: */
1047: if (fproc >= actf)
1048: break;
1.1 deraadt 1049:
1.5 grr 1050: /*
1051: * pad to end of column
1052: */
1053: if (sflag) {
1054: *ptbf++ = schar;
1055: } else {
1056: if (cnt >= 0)
1057: pln = col - cnt;
1058: else
1059: pln = col;
1060: if (pln > 0) {
1061: (void)memset(ptbf, (int)' ', pln);
1062: ptbf += pln;
1.1 deraadt 1063: }
1.5 grr 1064: }
1065: }
1.1 deraadt 1066:
1.5 grr 1067: /*
1068: * if there was anything to do, print it
1069: */
1070: if (fproc != 0) {
1071: if (!i && prhead(hbuf, fname, ++pagecnt))
1.29 ! jasper 1072: goto out;
1.1 deraadt 1073:
1.5 grr 1074: /*
1075: * output line
1076: */
1077: if (otln(buf, lstdat-buf, &ips, &ops, 0))
1.29 ! jasper 1078: goto out;
1.5 grr 1079: } else
1080: break;
1081: }
1.1 deraadt 1082:
1.5 grr 1083: /*
1084: * pad to end of page
1085: */
1086: if (prtail(lines - i, 0))
1087: return(1);
1.1 deraadt 1088:
1.5 grr 1089: for (j = 0; j < clcnt; ++j)
1090: if (rc[j] != END)
1091: rc[j] = NORMAL;
1.1 deraadt 1092:
1.5 grr 1093: if (actf <= 0)
1094: break;
1.1 deraadt 1095: }
1.5 grr 1096: if (actf <= 0)
1097: break;
1098: }
1.29 ! jasper 1099: if (eoptind < argc){
! 1100: goto out;
! 1101: } else {
! 1102: error = 0;
! 1103: goto out;
! 1104: }
! 1105:
! 1106: oomem:
! 1107: mfail();
! 1108: out:
! 1109: if (fbuf) {
! 1110: for (j = 0; j < clcnt; j++) {
! 1111: if (fbuf[j] && fbuf[j] != stdin)
! 1112: (void)fclose(fbuf[j]);
! 1113: }
! 1114: free(fbuf);
! 1115: }
! 1116: free(hbuf);
! 1117: free(buf);
! 1118: return error;
1.1 deraadt 1119: }
1120:
1121: /*
1.5 grr 1122: * inln(): input a line of data (unlimited length lines supported)
1123: * Input is optionally expanded to spaces
1124: * Returns 0 if normal LF, FORM on Formfeed, and END on EOF
1.1 deraadt 1125: *
1.5 grr 1126: * inf: file
1127: * buf: buffer
1128: * lim: buffer length
1129: * cnt: line length or -1 if no line (EOF for example)
1.20 otto 1130: * cps: column position 1st char in buffer (large line support)
1.5 grr 1131: * trnc: throw away data more than lim up to \n
1132: * mor: set if more data in line (not truncated)
1.1 deraadt 1133: */
1134: int
1.18 deraadt 1135: inln(FILE *inf, char *buf, int lim, int *cnt, int *cps, int trnc, int *mor)
1.1 deraadt 1136: {
1.13 mpech 1137: int col;
1138: int gap = ingap;
1139: int ch = -1;
1140: char *ptbuf;
1141: int chk = (int)inchar;
1.5 grr 1142:
1143: ptbuf = buf;
1144:
1145: if (gap) {
1146: /*
1147: * expanding input option
1148: */
1149: while ((--lim >= 0) && ((ch = getc(inf)) != EOF)) {
1150: /*
1151: * is this the input "tab" char
1152: */
1153: if (ch == chk) {
1.1 deraadt 1154: /*
1.5 grr 1155: * expand to number of spaces
1.1 deraadt 1156: */
1.5 grr 1157: col = (ptbuf - buf) + *cps;
1158: col = gap - (col % gap);
1.1 deraadt 1159:
1160: /*
1.5 grr 1161: * if more than this line, push back
1.1 deraadt 1162: */
1.5 grr 1163: if ((col > lim) && (ungetc(ch, inf) == EOF)) {
1164: *cnt = -1;
1165: return(END); /* shouldn't happen */
1.1 deraadt 1166: }
1.5 grr 1167:
1.1 deraadt 1168: /*
1.5 grr 1169: * expand to spaces
1.1 deraadt 1170: */
1.5 grr 1171: while ((--col >= 0) && (--lim >= 0))
1172: *ptbuf++ = ' ';
1173: continue;
1174: }
1.22 moritz 1175: if (ch == '\n' || (inform && ch == INFF))
1.5 grr 1176: break;
1177: *ptbuf++ = ch;
1178: }
1179: } else {
1180: /*
1181: * no expansion
1182: */
1183: while ((--lim >= 0) && ((ch = getc(inf)) != EOF)) {
1.22 moritz 1184: if (ch == '\n' || (inform && ch == INFF))
1.5 grr 1185: break;
1186: *ptbuf++ = ch;
1.1 deraadt 1187: }
1.5 grr 1188: }
1189: col = ptbuf - buf;
1190: if (ch == EOF) {
1191: *mor = 0;
1192: *cps = 0;
1193: *cnt = col ? col : -1;
1194: return(END);
1195: }
1196: if (inform && ch == INFF) {
1197: *mor = 0;
1198: *cps = 0;
1199: *cnt = col;
1200: return(FORM);
1201: }
1202: if (ch == '\n') {
1203: /*
1204: * entire line processed
1205: */
1206: *mor = 0;
1207: *cps = 0;
1208: *cnt = col;
1209: return(NORMAL);
1210: }
1211:
1212: /*
1213: * line was larger than limit
1214: */
1215: if (trnc) {
1.1 deraadt 1216: /*
1.5 grr 1217: * throw away rest of line
1.1 deraadt 1218: */
1.5 grr 1219: while ((ch = getc(inf)) != EOF) {
1220: if (ch == '\n')
1221: break;
1.1 deraadt 1222: }
1.5 grr 1223: *cps = 0;
1224: *mor = 0;
1225: } else {
1226: /*
1227: * save column offset if not truncated
1228: */
1229: *cps += col;
1230: *mor = 1;
1231: }
1.1 deraadt 1232:
1.5 grr 1233: *cnt = col;
1234: return(NORMAL);
1.1 deraadt 1235: }
1236:
1237: /*
1.5 grr 1238: * otln(): output a line of data. (Supports unlimited length lines)
1239: * output is optionally contracted to tabs
1.1 deraadt 1240: *
1.5 grr 1241: * buf: output buffer with data
1242: * cnt: number of chars of valid data in buf
1243: * svips: buffer input column position (for large lines)
1244: * svops: buffer output column position (for large lines)
1245: * mor: output line not complete in this buf; more data to come.
1246: * 1 is more, 0 is complete, -1 is no \n's
1.1 deraadt 1247: */
1248: int
1.18 deraadt 1249: otln(char *buf, int cnt, int *svips, int *svops, int mor)
1.1 deraadt 1250: {
1.13 mpech 1251: int ops; /* last col output */
1252: int ips; /* last col in buf examined */
1253: int gap = ogap;
1254: int tbps;
1255: char *endbuf;
1.5 grr 1256:
1257: /* skipping is only changed at header time not mid-line! */
1258: if (skipping)
1259: return (0);
1260:
1261: if (ogap) {
1262: /*
1263: * contracting on output
1264: */
1265: endbuf = buf + cnt;
1266: ops = *svops;
1267: ips = *svips;
1268: while (buf < endbuf) {
1269: /*
1270: * count number of spaces and ochar in buffer
1271: */
1272: if (*buf == ' ') {
1273: ++ips;
1274: ++buf;
1275: continue;
1276: }
1277:
1278: /*
1279: * simulate ochar processing
1280: */
1281: if (*buf == ochar) {
1282: ips += gap - (ips % gap);
1283: ++buf;
1284: continue;
1285: }
1286:
1287: /*
1288: * got a non space char; contract out spaces
1289: */
1290: while (ops < ips) {
1.1 deraadt 1291: /*
1.10 pvalchev 1292: * use one space if necessary
1293: */
1294: if (ips - ops == 1) {
1295: putchar(' ');
1296: break;
1297: }
1298: /*
1.5 grr 1299: * use as many ochar as will fit
1.1 deraadt 1300: */
1.5 grr 1301: if ((tbps = ops + gap - (ops % gap)) > ips)
1302: break;
1303: if (putchar(ochar) == EOF) {
1304: pfail();
1305: return(1);
1.1 deraadt 1306: }
1.5 grr 1307: ops = tbps;
1308: }
1.1 deraadt 1309:
1.5 grr 1310: while (ops < ips) {
1.1 deraadt 1311: /*
1.5 grr 1312: * finish off with spaces
1.1 deraadt 1313: */
1.5 grr 1314: if (putchar(' ') == EOF) {
1315: pfail();
1316: return(1);
1317: }
1318: ++ops;
1319: }
1320:
1321: /*
1322: * output non space char
1323: */
1324: if (putchar(*buf++) == EOF) {
1.1 deraadt 1325: pfail();
1326: return(1);
1.5 grr 1327: }
1328: ++ips;
1329: ++ops;
1330: }
1331:
1332: if (mor > 0) {
1333: /*
1334: * if incomplete line, save position counts
1335: */
1336: *svops = ops;
1337: *svips = ips;
1338: return(0);
1.1 deraadt 1339: }
1.5 grr 1340:
1341: if (mor < 0) {
1342: while (ops < ips) {
1343: /*
1.10 pvalchev 1344: * use one space if necessary
1345: */
1346: if (ips - ops == 1) {
1347: putchar(' ');
1348: break;
1349: }
1350: /*
1.5 grr 1351: * use as many ochar as will fit
1352: */
1353: if ((tbps = ops + gap - (ops % gap)) > ips)
1354: break;
1355: if (putchar(ochar) == EOF) {
1356: pfail();
1357: return(1);
1358: }
1359: ops = tbps;
1360: }
1.10 pvalchev 1361:
1.5 grr 1362: while (ops < ips) {
1363: /*
1364: * finish off with spaces
1365: */
1366: if (putchar(' ') == EOF) {
1367: pfail();
1368: return(1);
1369: }
1370: ++ops;
1371: }
1372: return(0);
1373: }
1374: } else {
1375: /*
1376: * output is not contracted
1377: */
1.22 moritz 1378: if (cnt && (fwrite(buf, sizeof(char), cnt, stdout) < cnt)) {
1.5 grr 1379: pfail();
1380: return(1);
1381: }
1382: if (mor != 0)
1383: return(0);
1384: }
1385:
1386: /*
1387: * process line end and double space as required
1388: */
1389: if ((putchar('\n') == EOF) || (dspace && (putchar('\n') == EOF))) {
1390: pfail();
1391: return(1);
1392: }
1393: return(0);
1.1 deraadt 1394: }
1395:
1.5 grr 1396: #ifdef notused
1.1 deraadt 1397: /*
1.5 grr 1398: * inskip(): skip over pgcnt pages with lncnt lines per page
1399: * file is closed at EOF (if not stdin).
1.1 deraadt 1400: *
1.5 grr 1401: * inf FILE * to read from
1402: * pgcnt number of pages to skip
1403: * lncnt number of lines per page
1.1 deraadt 1404: */
1405: int
1.18 deraadt 1406: inskip(FILE *inf, int pgcnt, int lncnt)
1.1 deraadt 1407: {
1.13 mpech 1408: int c;
1409: int cnt;
1.1 deraadt 1410:
1.5 grr 1411: while(--pgcnt > 0) {
1412: cnt = lncnt;
1413: while ((c = getc(inf)) != EOF) {
1414: if ((c == '\n') && (--cnt == 0))
1415: break;
1416: }
1417: if (c == EOF) {
1418: if (inf != stdin)
1419: (void)fclose(inf);
1420: return(1);
1.1 deraadt 1421: }
1.5 grr 1422: }
1423: return(0);
1.1 deraadt 1424: }
1.5 grr 1425: #endif
1.1 deraadt 1426:
1427: /*
1.5 grr 1428: * nxtfile: returns a FILE * to next file in arg list and sets the
1429: * time field for this file (or current date).
1.1 deraadt 1430: *
1.5 grr 1431: * buf array to store proper date for the header.
1432: * dt if set skips the date processing (used with -m)
1.1 deraadt 1433: */
1434: FILE *
1.18 deraadt 1435: nxtfile(int argc, char *argv[], char **fname, char *buf, int dt)
1.1 deraadt 1436: {
1.5 grr 1437: FILE *inf = NULL;
1438: struct timeval tv;
1439: struct timezone tz;
1440: struct tm *timeptr = NULL;
1441: struct stat statbuf;
1442: time_t curtime;
1443: static int twice = -1;
1444:
1445: ++twice;
1446: if (eoptind >= argc) {
1447: /*
1448: * no file listed; default, use standard input
1449: */
1450: if (twice)
1451: return(NULL);
1452: clearerr(stdin);
1453: inf = stdin;
1454: if (header != NULL)
1455: *fname = header;
1456: else
1457: *fname = FNAME;
1458: if (nohead)
1459: return(inf);
1460: if (gettimeofday(&tv, &tz) < 0) {
1461: ++errcnt;
1.12 deraadt 1462: ferrout("pr: cannot get time of day, %s\n",
1.5 grr 1463: strerror(errno));
1464: eoptind = argc - 1;
1465: return(NULL);
1466: }
1467: curtime = tv.tv_sec;
1468: timeptr = localtime(&curtime);
1469: }
1470: for (; eoptind < argc; ++eoptind) {
1471: if (strcmp(argv[eoptind], "-") == 0) {
1472: /*
1473: * process a "-" for filename
1474: */
1475: clearerr(stdin);
1476: inf = stdin;
1477: if (header != NULL)
1478: *fname = header;
1479: else
1480: *fname = FNAME;
1481: ++eoptind;
1482: if (nohead || (dt && twice))
1483: return(inf);
1484: if (gettimeofday(&tv, &tz) < 0) {
1485: ++errcnt;
1.12 deraadt 1486: ferrout("pr: cannot get time of day, %s\n",
1.5 grr 1487: strerror(errno));
1488: return(NULL);
1489: }
1490: curtime = tv.tv_sec;
1491: timeptr = localtime(&curtime);
1492: } else {
1493: /*
1494: * normal file processing
1495: */
1496: if ((inf = fopen(argv[eoptind], "r")) == NULL) {
1497: ++errcnt;
1498: if (nodiag)
1499: continue;
1.12 deraadt 1500: ferrout("pr: Cannot open %s, %s\n",
1.5 grr 1501: argv[eoptind], strerror(errno));
1502: continue;
1503: }
1504: if (header != NULL)
1505: *fname = header;
1506: else if (dt)
1507: *fname = FNAME;
1508: else
1509: *fname = argv[eoptind];
1510: ++eoptind;
1511: if (nohead || (dt && twice))
1512: return(inf);
1.1 deraadt 1513:
1.5 grr 1514: if (dt) {
1.1 deraadt 1515: if (gettimeofday(&tv, &tz) < 0) {
1.5 grr 1516: ++errcnt;
1.12 deraadt 1517: ferrout("pr: cannot get time of day, %s\n",
1.5 grr 1518: strerror(errno));
1519: return(NULL);
1.1 deraadt 1520: }
1521: curtime = tv.tv_sec;
1522: timeptr = localtime(&curtime);
1.5 grr 1523: } else {
1524: if (fstat(fileno(inf), &statbuf) < 0) {
1525: ++errcnt;
1526: (void)fclose(inf);
1.12 deraadt 1527: ferrout("pr: Cannot stat %s, %s\n",
1.5 grr 1528: argv[eoptind], strerror(errno));
1529: return(NULL);
1530: }
1531: timeptr = localtime(&(statbuf.st_mtime));
1532: }
1533: }
1534: break;
1535: }
1536: if (inf == NULL)
1537: return(NULL);
1538:
1539: /*
1540: * set up time field used in header
1541: */
1.22 moritz 1542: if (strftime(buf, HDBUF, timefrmt, timeptr) == 0) {
1.5 grr 1543: ++errcnt;
1544: if (inf != stdin)
1545: (void)fclose(inf);
1.12 deraadt 1546: ferrout("pr: time conversion failed\n");
1.5 grr 1547: return(NULL);
1548: }
1549: return(inf);
1.1 deraadt 1550: }
1551:
1552: /*
1.5 grr 1553: * addnum(): adds the line number to the column
1554: * Truncates from the front or pads with spaces as required.
1555: * Numbers are right justified.
1.1 deraadt 1556: *
1.5 grr 1557: * buf buffer to store the number
1558: * wdth width of buffer to fill
1559: * line line number
1.1 deraadt 1560: *
1.5 grr 1561: * NOTE: numbers occupy part of the column. The posix
1562: * spec does not specify if -i processing should or should not
1563: * occur on number padding. The spec does say it occupies
1564: * part of the column. The usage of addnum currently treats
1565: * numbers as part of the column so spaces may be replaced.
1.1 deraadt 1566: */
1567: void
1.18 deraadt 1568: addnum(char *buf, int wdth, int line)
1.1 deraadt 1569: {
1.13 mpech 1570: char *pt = buf + wdth;
1.1 deraadt 1571:
1.5 grr 1572: do {
1573: *--pt = digs[line % 10];
1574: line /= 10;
1575: } while (line && (pt > buf));
1576:
1577: /*
1578: * pad with space as required
1579: */
1580: while (pt > buf)
1581: *--pt = ' ';
1.1 deraadt 1582: }
1583:
1584: /*
1.5 grr 1585: * prhead(): prints the top of page header
1.1 deraadt 1586: *
1.5 grr 1587: * buf buffer with time field (and offset)
1588: * cnt number of chars in buf
1589: * fname fname field for header
1590: * pagcnt page number
1591: *
1592: * prhead() should be used carefully, we don't want to print out headers
1593: * for null input files or orphan headers at the end of files, and also
1594: * trailer processing is typically conditional on whether you've called
1.20 otto 1595: * prhead() at least once for a file and incremented pagecnt. Exactly
1.5 grr 1596: * how to determine whether to print a header is a little different in
1597: * the context each output mode, but we let the caller figure that out.
1.1 deraadt 1598: */
1599: int
1.18 deraadt 1600: prhead(char *buf, char *fname, int pagcnt)
1.1 deraadt 1601: {
1.5 grr 1602: int ips = 0;
1603: int ops = 0;
1604:
1605: beheaded = 1;
1.1 deraadt 1606:
1.5 grr 1607: if (skipping && pagcnt >= pgnm)
1608: skipping = 0;
1609:
1610: if (nohead || skipping)
1611: return (0);
1612:
1613: if ((putchar('\n') == EOF) || (putchar('\n') == EOF)) {
1614: pfail();
1615: return(1);
1616: }
1617: /*
1618: * posix is not clear if the header is subject to line length
1619: * restrictions. The specification for header line format
1620: * in the spec clearly does not limit length. No pr currently
1621: * restricts header length. However if we need to truncate in
1622: * an reasonable way, adjust the length of the printf by
1.15 deraadt 1623: * changing HDFMT to allow a length max as an argument printf.
1.5 grr 1624: * buf (which contains the offset spaces and time field could
1625: * also be trimmed
1626: *
1627: * note only the offset (if any) is processed for tab expansion
1628: */
1629: if (offst && otln(buf, offst, &ips, &ops, -1))
1630: return(1);
1631: (void)printf(HDFMT,buf+offst, fname, pagcnt);
1632: return(0);
1.1 deraadt 1633: }
1634:
1635: /*
1.5 grr 1636: * prtail(): pad page with empty lines (if required) and print page trailer
1637: * if requested
1638: *
1639: * cnt number of lines of padding needed
1640: * incomp was a '\n' missing from last line output
1.1 deraadt 1641: *
1.5 grr 1642: * prtail() can now be invoked unconditionally, with the notion that if
1.20 otto 1643: * we haven't printed a header, there is no need for a trailer
1.1 deraadt 1644: */
1645: int
1.18 deraadt 1646: prtail(int cnt, int incomp)
1.1 deraadt 1647: {
1.5 grr 1648: /*
1649: * if were's skipping to page N or haven't put out anything yet just exit
1650: */
1651: if (skipping || beheaded == 0)
1652: return (0);
1653: beheaded = 0;
1654:
1655: /*
1656: * if noheaders, only terminate an incomplete last line
1657: */
1658: if (nohead) {
1659:
1660: if (incomp) {
1661: if (dspace)
1662: if (putchar('\n') == EOF) {
1663: pfail();
1664: return(1);
1.3 imp 1665: }
1.5 grr 1666: if (putchar('\n') == EOF) {
1667: pfail();
1668: return(1);
1669: }
1.1 deraadt 1670: }
1.5 grr 1671: /*
1672: * but honor the formfeed request
1673: */
1674: if (formfeed)
1675: if (putchar(OUTFF) == EOF) {
1676: pfail();
1677: return(1);
1678: }
1679:
1680: } else {
1.1 deraadt 1681:
1682: /*
1683: * if double space output two \n
1.5 grr 1684: *
1685: * XXX this all seems bogus, why are we doing it here???
1686: * page length is in terms of output lines and only the input is
1687: * supposed to be double spaced... otln() users should be doing
1688: * something like linect+=(dspace ? 2:1).
1.1 deraadt 1689: */
1690: if (dspace)
1.5 grr 1691: cnt *= 2;
1.1 deraadt 1692:
1693: /*
1694: * if an odd number of lines per page, add an extra \n
1695: */
1696: if (addone)
1.5 grr 1697: ++cnt;
1.1 deraadt 1698:
1699: /*
1.5 grr 1700: * either put out a form-feed or pad page with blanks
1.1 deraadt 1701: */
1702: if (formfeed) {
1.5 grr 1703: if (incomp)
1704: if (putchar('\n') == EOF) {
1705: pfail();
1706: return(1);
1.1 deraadt 1707: }
1.5 grr 1708: if (putchar(OUTFF) == EOF) {
1709: pfail();
1710: return(1);
1711: }
1712:
1713: } else {
1714:
1715: if (incomp)
1716: cnt++;
1717:
1718: cnt += TAILLEN;
1719: while (--cnt >= 0) {
1.1 deraadt 1720: if (putchar('\n') == EOF) {
1.5 grr 1721: pfail();
1722: return(1);
1.1 deraadt 1723: }
1.5 grr 1724: }
1.1 deraadt 1725: }
1.5 grr 1726: }
1727:
1728: return(0);
1.1 deraadt 1729: }
1730:
1731: /*
1.5 grr 1732: * terminate(): when a SIGINT is recvd
1.1 deraadt 1733: */
1.22 moritz 1734: /*ARGSUSED*/
1.1 deraadt 1735: void
1.18 deraadt 1736: terminate(int which_sig)
1.1 deraadt 1737: {
1.12 deraadt 1738: flsh_errs();
1.11 deraadt 1739: _exit(1);
1.1 deraadt 1740: }
1741:
1742: void
1.18 deraadt 1743: mfail(void)
1.1 deraadt 1744: {
1.12 deraadt 1745: ferrout("pr: memory allocation failed\n");
1.1 deraadt 1746: }
1747:
1748: void
1.18 deraadt 1749: pfail(void)
1.1 deraadt 1750: {
1.12 deraadt 1751: ferrout("pr: write failure, %s\n", strerror(errno));
1.1 deraadt 1752: }
1753:
1754: void
1.18 deraadt 1755: usage(void)
1.1 deraadt 1756: {
1.12 deraadt 1757: ferrout(
1.23 jmc 1758: "usage: pr [+page] [-column] [-adFfmrt] [-e [char] [gap]] [-h header]\n");
1.12 deraadt 1759: ferrout(
1.23 jmc 1760: "\t[-i [char] [gap]] [-l lines] [-n [char] [width]] [-o offset]\n");
1.12 deraadt 1761: ferrout(
1.23 jmc 1762: "\t[-s [char]] [-w width] [-] [file ...]\n");
1.1 deraadt 1763: }
1764:
1765: /*
1.5 grr 1766: * setup: Validate command args, initialize and perform sanity
1767: * checks on options
1.1 deraadt 1768: */
1769: int
1.18 deraadt 1770: setup(int argc, char *argv[])
1.1 deraadt 1771: {
1.13 mpech 1772: int c;
1.5 grr 1773: int eflag = 0;
1774: int iflag = 0;
1775: int wflag = 0;
1776: int cflag = 0;
1.22 moritz 1777: const char *errstr;
1.5 grr 1778:
1.12 deraadt 1779: if (isatty(fileno(stdout)))
1780: ferr = 1;
1781:
1.6 millert 1782: while ((c = egetopt(argc, argv, "#adfFmrte?h:i?l:n?o:s?w:")) != -1) {
1.5 grr 1783: switch (c) {
1784: case '+':
1.22 moritz 1785: pgnm = strtonum(eoptarg, 1, INT_MAX, &errstr);
1786: if (errstr) {
1787: ferrout("pr: +page number is %s: %s\n", errstr, eoptarg);
1.5 grr 1788: return(1);
1789: }
1790: ++skipping;
1791: break;
1792: case '-':
1.22 moritz 1793: clcnt = strtonum(eoptarg, 1, INT_MAX, &errstr);
1794: if (errstr) {
1795: ferrout("pr: -columns number is %s: %s\n", errstr, eoptarg);
1.5 grr 1796: return(1);
1797: }
1798: if (clcnt > 1)
1799: ++cflag;
1800: break;
1801: case 'a':
1802: ++across;
1803: break;
1804: case 'd':
1805: ++dspace;
1806: break;
1807: case 'e':
1808: ++eflag;
1809: if ((eoptarg != NULL) && !isdigit(*eoptarg))
1810: inchar = *eoptarg++;
1811: else
1812: inchar = INCHAR;
1813: if ((eoptarg != NULL) && isdigit(*eoptarg)) {
1.22 moritz 1814: ingap = strtonum(eoptarg, 0, INT_MAX, &errstr);
1815: if (errstr) {
1816: ferrout("pr: -e gap is %s: %s\n", errstr, eoptarg);
1.5 grr 1817: return(1);
1818: }
1819: if (ingap == 0)
1820: ingap = INGAP;
1821: } else if ((eoptarg != NULL) && (*eoptarg != '\0')) {
1.12 deraadt 1822: ferrout("pr: invalid value for -e %s\n", eoptarg);
1.5 grr 1823: return(1);
1824: } else
1825: ingap = INGAP;
1826: break;
1827: case 'f':
1828: case 'F':
1829: ++formfeed;
1830: break;
1831: case 'h':
1832: header = eoptarg;
1833: break;
1834: case 'i':
1835: ++iflag;
1836: if ((eoptarg != NULL) && !isdigit(*eoptarg))
1837: ochar = *eoptarg++;
1838: else
1839: ochar = OCHAR;
1840: if ((eoptarg != NULL) && isdigit(*eoptarg)) {
1.22 moritz 1841: ogap = strtonum(eoptarg, 0, INT_MAX, &errstr);
1842: if (errstr) {
1843: ferrout("pr: -i gap is %s: %s\n", errstr, eoptarg);
1.5 grr 1844: return(1);
1845: }
1846: if (ogap == 0)
1847: ogap = OGAP;
1848: } else if ((eoptarg != NULL) && (*eoptarg != '\0')) {
1.12 deraadt 1849: ferrout("pr: invalid value for -i %s\n", eoptarg);
1.5 grr 1850: return(1);
1851: } else
1852: ogap = OGAP;
1853: break;
1854: case 'l':
1.22 moritz 1855: lines = strtonum(eoptarg, 1, INT_MAX, &errstr);
1856: if (errstr) {
1857: ferrout("pr: number of lines is %s: %s\n", errstr, eoptarg);
1.5 grr 1858: return(1);
1859: }
1860: break;
1861: case 'm':
1862: ++merge;
1863: break;
1864: case 'n':
1865: if ((eoptarg != NULL) && !isdigit(*eoptarg))
1866: nmchar = *eoptarg++;
1867: else
1868: nmchar = NMCHAR;
1869: if ((eoptarg != NULL) && isdigit(*eoptarg)) {
1.22 moritz 1870: nmwd = strtonum(eoptarg, 1, INT_MAX, &errstr);
1871: if (errstr) {
1872: ferrout("pr: -n width is %s: %s\n", errstr, eoptarg);
1.5 grr 1873: return(1);
1.1 deraadt 1874: }
1.5 grr 1875: } else if ((eoptarg != NULL) && (*eoptarg != '\0')) {
1.12 deraadt 1876: ferrout("pr: invalid value for -n %s\n", eoptarg);
1.5 grr 1877: return(1);
1878: } else
1879: nmwd = NMWD;
1880: break;
1881: case 'o':
1.22 moritz 1882: offst = strtonum(eoptarg, 1, INT_MAX, &errstr);
1883: if (errstr) {
1884: ferrout("pr: -o offset is %s: %s\n", errstr, eoptarg);
1.5 grr 1885: return(1);
1886: }
1887: break;
1888: case 'r':
1889: ++nodiag;
1890: break;
1891: case 's':
1892: ++sflag;
1893: if (eoptarg == NULL)
1894: schar = SCHAR;
1.7 deraadt 1895: else {
1.5 grr 1896: schar = *eoptarg++;
1.7 deraadt 1897: if (*eoptarg != '\0') {
1.12 deraadt 1898: ferrout("pr: invalid value for -s %s\n", eoptarg);
1.7 deraadt 1899: return(1);
1900: }
1.5 grr 1901: }
1902: break;
1903: case 't':
1904: ++nohead;
1905: break;
1906: case 'w':
1907: ++wflag;
1.22 moritz 1908: pgwd = strtonum(eoptarg, 1, INT_MAX, &errstr);
1909: if (errstr) {
1910: ferrout("pr: -w width is %s: %s\n", errstr, eoptarg);
1.5 grr 1911: return(1);
1912: }
1913: break;
1914: default:
1915: return(1);
1916: }
1917: }
1918:
1919: /*
1920: * default and sanity checks
1921: */
1922: inform++;
1923:
1924: if (!clcnt) {
1925: if (merge) {
1926: if ((clcnt = argc - eoptind) <= 1) {
1927: clcnt = CLCNT;
1928: #ifdef stupid
1929: merge = 0;
1930: #endif
1931: }
1.1 deraadt 1932: } else
1.5 grr 1933: clcnt = CLCNT;
1934: }
1935: if (across) {
1936: if (clcnt == 1) {
1.12 deraadt 1937: ferrout("pr: -a flag requires multiple columns\n");
1.5 grr 1938: return(1);
1939: }
1940: if (merge) {
1.12 deraadt 1941: ferrout("pr: -m cannot be used with -a\n");
1.5 grr 1942: return(1);
1943: }
1944: }
1945: if (!wflag) {
1946: if (sflag)
1947: pgwd = SPGWD;
1948: else
1949: pgwd = PGWD;
1950: }
1951: if (cflag || merge) {
1952: if (!eflag) {
1953: inchar = INCHAR;
1954: ingap = INGAP;
1955: }
1956: if (!iflag) {
1957: ochar = OCHAR;
1958: ogap = OGAP;
1959: }
1960: }
1961: if (cflag) {
1962: if (merge) {
1.12 deraadt 1963: ferrout("pr: -m cannot be used with multiple columns\n");
1.5 grr 1964: return(1);
1.1 deraadt 1965: }
1.5 grr 1966: if (nmwd) {
1967: colwd = (pgwd + 1 - (clcnt * (nmwd + 2)))/clcnt;
1968: pgwd = ((colwd + nmwd + 2) * clcnt) - 1;
1969: } else {
1970: colwd = (pgwd + 1 - clcnt)/clcnt;
1971: pgwd = ((colwd + 1) * clcnt) - 1;
1.1 deraadt 1972: }
1.5 grr 1973: if (colwd < 1) {
1.12 deraadt 1974: ferrout("pr: page width is too small for %d columns\n",clcnt);
1.5 grr 1975: return(1);
1976: }
1977: }
1978: if (!lines)
1979: lines = LINES;
1980:
1981: /*
1982: * make sure long enough for headers. if not disable
1983: */
1984: if (lines <= HEADLEN + TAILLEN)
1985: ++nohead;
1986: else if (!nohead)
1987: lines -= HEADLEN + TAILLEN;
1988:
1989: /*
1990: * adjust for double space on odd length pages
1991: */
1992: if (dspace) {
1993: if (lines == 1)
1994: dspace = 0;
1995: else {
1996: if (lines & 1)
1997: ++addone;
1998: lines /= 2;
1999: }
2000: }
2001:
2002: if ((timefrmt = getenv("LC_TIME")) == NULL)
2003: timefrmt = TIMEFMT;
2004: return(0);
1.1 deraadt 2005: }