===================================================================
RCS file: /cvsrepo/anoncvs/cvs/src/usr.bin/ssh/ttymodes.c,v
retrieving revision 1.2
retrieving revision 1.3
diff -u -r1.2 -r1.3
--- src/usr.bin/ssh/ttymodes.c	1999/09/30 05:03:05	1.2
+++ src/usr.bin/ssh/ttymodes.c	1999/11/23 22:25:56	1.3
@@ -17,217 +17,216 @@
 */
 
 #include "includes.h"
-RCSID("$Id: ttymodes.c,v 1.2 1999/09/30 05:03:05 deraadt Exp $");
+RCSID("$Id: ttymodes.c,v 1.3 1999/11/23 22:25:56 markus Exp $");
 
 #include "packet.h"
 #include "ssh.h"
 
 #define TTY_OP_END	0
-#define TTY_OP_ISPEED	192 /* int follows */
-#define TTY_OP_OSPEED	193 /* int follows */
+#define TTY_OP_ISPEED	192	/* int follows */
+#define TTY_OP_OSPEED	193	/* int follows */
 
 /* Converts POSIX speed_t to a baud rate.  The values of the constants
    for speed_t are not themselves portable. */
 
-static int speed_to_baud(speed_t speed)
+static int 
+speed_to_baud(speed_t speed)
 {
-  switch (speed)
-    {
-    case B0:
-      return 0;
-    case B50:
-      return 50;
-    case B75:
-      return 75;
-    case B110:
-      return 110;
-    case B134:
-      return 134;
-    case B150:
-      return 150;
-    case B200:
-      return 200;
-    case B300:
-      return 300;
-    case B600:
-      return 600;
-    case B1200:
-      return 1200;
-    case B1800:
-      return 1800;
-    case B2400:
-      return 2400;
-    case B4800:
-      return 4800;
-    case B9600:
-      return 9600;
+	switch (speed) {
+	case B0:
+		return 0;
+	case B50:
+		return 50;
+	case B75:
+		return 75;
+	case B110:
+		return 110;
+	case B134:
+		return 134;
+	case B150:
+		return 150;
+	case B200:
+		return 200;
+	case B300:
+		return 300;
+	case B600:
+		return 600;
+	case B1200:
+		return 1200;
+	case B1800:
+		return 1800;
+	case B2400:
+		return 2400;
+	case B4800:
+		return 4800;
+	case B9600:
+		return 9600;
 
 #ifdef B19200
-    case B19200:
-      return 19200;
+	case B19200:
+		return 19200;
 #else /* B19200 */
 #ifdef EXTA
-    case EXTA:
-      return 19200;
+	case EXTA:
+		return 19200;
 #endif /* EXTA */
 #endif /* B19200 */
 
 #ifdef B38400
-    case B38400:
-      return 38400;
+	case B38400:
+		return 38400;
 #else /* B38400 */
 #ifdef EXTB
-    case EXTB:
-      return 38400;
+	case EXTB:
+		return 38400;
 #endif /* EXTB */
 #endif /* B38400 */
 
 #ifdef B7200
-    case B7200:
-      return 7200;
+	case B7200:
+		return 7200;
 #endif /* B7200 */
 #ifdef B14400
-    case B14400:
-      return 14400;
+	case B14400:
+		return 14400;
 #endif /* B14400 */
 #ifdef B28800
-    case B28800:
-      return 28800;
+	case B28800:
+		return 28800;
 #endif /* B28800 */
 #ifdef B57600
-    case B57600:
-      return 57600;
+	case B57600:
+		return 57600;
 #endif /* B57600 */
 #ifdef B76800
-    case B76800:
-      return 76800;
+	case B76800:
+		return 76800;
 #endif /* B76800 */
 #ifdef B115200
-    case B115200:
-      return 115200;
+	case B115200:
+		return 115200;
 #endif /* B115200 */
 #ifdef B230400
-    case B230400:
-      return 230400;
+	case B230400:
+		return 230400;
 #endif /* B230400 */
-    default:
-      return 9600;
-    }
+	default:
+		return 9600;
+	}
 }
 
 /* Converts a numeric baud rate to a POSIX speed_t. */
 
-static speed_t baud_to_speed(int baud)
+static speed_t 
+baud_to_speed(int baud)
 {
-  switch (baud)
-    {
-    case 0:
-      return B0;
-    case 50:
-      return B50;
-    case 75:
-      return B75;
-    case 110:
-      return B110;
-    case 134:
-      return B134;
-    case 150:
-      return B150;
-    case 200:
-      return B200;
-    case 300:
-      return B300;
-    case 600:
-      return B600;
-    case 1200:
-      return B1200;
-    case 1800:
-      return B1800;
-    case 2400:
-      return B2400;
-    case 4800:
-      return B4800;
-    case 9600:
-      return B9600;
+	switch (baud) {
+		case 0:
+		return B0;
+	case 50:
+		return B50;
+	case 75:
+		return B75;
+	case 110:
+		return B110;
+	case 134:
+		return B134;
+	case 150:
+		return B150;
+	case 200:
+		return B200;
+	case 300:
+		return B300;
+	case 600:
+		return B600;
+	case 1200:
+		return B1200;
+	case 1800:
+		return B1800;
+	case 2400:
+		return B2400;
+	case 4800:
+		return B4800;
+	case 9600:
+		return B9600;
 
 #ifdef B19200
-    case 19200:
-      return B19200;
+	case 19200:
+		return B19200;
 #else /* B19200 */
 #ifdef EXTA
-    case 19200:
-      return EXTA;
+	case 19200:
+		return EXTA;
 #endif /* EXTA */
 #endif /* B19200 */
 
 #ifdef B38400
-    case 38400:
-      return B38400;
+	case 38400:
+		return B38400;
 #else /* B38400 */
 #ifdef EXTB
-    case 38400:
-      return EXTB;
+	case 38400:
+		return EXTB;
 #endif /* EXTB */
 #endif /* B38400 */
 
 #ifdef B7200
-    case 7200:
-      return B7200;
+	case 7200:
+		return B7200;
 #endif /* B7200 */
 #ifdef B14400
-    case 14400:
-      return B14400;
+	case 14400:
+		return B14400;
 #endif /* B14400 */
 #ifdef B28800
-    case 28800:
-      return B28800;
+	case 28800:
+		return B28800;
 #endif /* B28800 */
 #ifdef B57600
-    case 57600:
-      return B57600;
+	case 57600:
+		return B57600;
 #endif /* B57600 */
 #ifdef B76800
-    case 76800:
-      return B76800;
+	case 76800:
+		return B76800;
 #endif /* B76800 */
 #ifdef B115200
-    case 115200:
-      return B115200;
+	case 115200:
+		return B115200;
 #endif /* B115200 */
 #ifdef B230400
-    case 230400:
-      return B230400;
+	case 230400:
+		return B230400;
 #endif /* B230400 */
-    default:
-      return B9600;
-    }
+	default:
+		return B9600;
+	}
 }
 
 /* Encodes terminal modes for the terminal referenced by fd in a portable
    manner, and appends the modes to a packet being constructed. */
 
-void tty_make_modes(int fd)
+void 
+tty_make_modes(int fd)
 {
-  struct termios tio;
-  int baud;
+	struct termios tio;
+	int baud;
 
-  /* Get the modes. */
-  if (tcgetattr(fd, &tio) < 0)
-    {
-      packet_put_char(TTY_OP_END);
-      log("tcgetattr: %.100s", strerror(errno));
-      return;
-    }
+	/* Get the modes. */
+	if (tcgetattr(fd, &tio) < 0) {
+		packet_put_char(TTY_OP_END);
+		log("tcgetattr: %.100s", strerror(errno));
+		return;
+	}
+	/* Store input and output baud rates. */
+	baud = speed_to_baud(cfgetospeed(&tio));
+	packet_put_char(TTY_OP_OSPEED);
+	packet_put_int(baud);
+	baud = speed_to_baud(cfgetispeed(&tio));
+	packet_put_char(TTY_OP_ISPEED);
+	packet_put_int(baud);
 
-  /* Store input and output baud rates. */
-  baud = speed_to_baud(cfgetospeed(&tio));
-  packet_put_char(TTY_OP_OSPEED);
-  packet_put_int(baud);
-  baud = speed_to_baud(cfgetispeed(&tio));
-  packet_put_char(TTY_OP_ISPEED);
-  packet_put_int(baud);
-
-  /* Store values of mode flags. */
+	/* Store values of mode flags. */
 #define TTYCHAR(NAME, OP) \
   packet_put_char(OP); packet_put_char(tio.c_cc[NAME]);
 #define TTYMODE(NAME, FIELD, OP) \
@@ -244,48 +243,47 @@
 #undef SGTTYMODE
 #undef SGTTYMODEN
 
-  /* Mark end of mode data. */
-  packet_put_char(TTY_OP_END);
+	/* Mark end of mode data. */
+	packet_put_char(TTY_OP_END);
 }
 
 /* Decodes terminal modes for the terminal referenced by fd in a portable
    manner from a packet being read. */
 
-void tty_parse_modes(int fd, int *n_bytes_ptr)
+void 
+tty_parse_modes(int fd, int *n_bytes_ptr)
 {
-  struct termios tio;
-  int opcode, baud;
-  int n_bytes = 0;
-  int failure = 0;
+	struct termios tio;
+	int opcode, baud;
+	int n_bytes = 0;
+	int failure = 0;
 
-  /* Get old attributes for the terminal.  We will modify these flags. 
-     I am hoping that if there are any machine-specific modes, they will
-     initially have reasonable values. */
-  if (tcgetattr(fd, &tio) < 0)
-    failure = -1;
+	/* Get old attributes for the terminal.  We will modify these
+	   flags. I am hoping that if there are any machine-specific
+	   modes, they will initially have reasonable values. */
+	if (tcgetattr(fd, &tio) < 0)
+		failure = -1;
 
-  for (;;)
-    {
-      n_bytes += 1;
-      opcode = packet_get_char();
-      switch (opcode)
-	{
-	case TTY_OP_END:
-	  goto set;
+	for (;;) {
+		n_bytes += 1;
+		opcode = packet_get_char();
+		switch (opcode) {
+		case TTY_OP_END:
+			goto set;
 
-	case TTY_OP_ISPEED:
-	  n_bytes += 4;
-	  baud = packet_get_int();
-	  if (failure != -1 && cfsetispeed(&tio, baud_to_speed(baud)) < 0)
-	    error("cfsetispeed failed for %d", baud);
-	  break;
+		case TTY_OP_ISPEED:
+			n_bytes += 4;
+			baud = packet_get_int();
+			if (failure != -1 && cfsetispeed(&tio, baud_to_speed(baud)) < 0)
+				error("cfsetispeed failed for %d", baud);
+			break;
 
-	case TTY_OP_OSPEED:
-	  n_bytes += 4;
-	  baud = packet_get_int();
-	  if (failure != -1 && cfsetospeed(&tio, baud_to_speed(baud)) < 0)
-	    error("cfsetospeed failed for %d", baud);
-	  break;
+		case TTY_OP_OSPEED:
+			n_bytes += 4;
+			baud = packet_get_int();
+			if (failure != -1 && cfsetospeed(&tio, baud_to_speed(baud)) < 0)
+				error("cfsetospeed failed for %d", baud);
+			break;
 
 #define TTYCHAR(NAME, OP) 				\
 	case OP:					\
@@ -312,48 +310,43 @@
 #undef SGTTYMODE
 #undef SGTTYMODEN
 
-	default:
-	  debug("Ignoring unsupported tty mode opcode %d (0x%x)",
-		opcode, opcode);
-	  /* Opcodes 0 to 127 are defined to have a one-byte argument. */
-	  if (opcode >= 0 && opcode < 128)
-	    {
-	      n_bytes += 1;
-	      (void)packet_get_char();
-	      break;
-	    }
-	  else
-	    {
-	      /* Opcodes 128 to 159 are defined to have an integer argument. */
-	      if (opcode >= 128 && opcode < 160)
-		{
-		  n_bytes += 4;
-		  (void)packet_get_int();
-		  break;
+		default:
+			debug("Ignoring unsupported tty mode opcode %d (0x%x)",
+			      opcode, opcode);
+			/* Opcodes 0 to 127 are defined to have a one-byte argument. */
+			if (opcode >= 0 && opcode < 128) {
+				n_bytes += 1;
+				(void) packet_get_char();
+				break;
+			} else {
+				/* Opcodes 128 to 159 are defined to have an integer argument. */
+				if (opcode >= 128 && opcode < 160) {
+					n_bytes += 4;
+					(void) packet_get_int();
+					break;
+				}
+			}
+			/* It is a truly undefined opcode (160 to 255).
+			   We have no idea about its arguments.  So we
+			   must stop parsing.  Note that some data may be
+			   left in the packet; hopefully there is nothing
+			   more coming after the mode data. */
+			log("parse_tty_modes: unknown opcode %d", opcode);
+			packet_integrity_check(0, 1, SSH_CMSG_REQUEST_PTY);
+			goto set;
 		}
-	    }
-	  /* It is a truly undefined opcode (160 to 255).  We have no idea
-	     about its arguments.  So we must stop parsing.  Note that some
-	     data may be left in the packet; hopefully there is nothing more
-	     coming after the mode data. */
-	  log("parse_tty_modes: unknown opcode %d", opcode);
-	  packet_integrity_check(0, 1, SSH_CMSG_REQUEST_PTY);
-	  goto set;
 	}
-    }
 
- set:
-  if (*n_bytes_ptr != n_bytes)
-    {
-      *n_bytes_ptr = n_bytes;
-      return;			/* Don't process bytes passed */
-    }
+set:
+	if (*n_bytes_ptr != n_bytes) {
+		*n_bytes_ptr = n_bytes;
+		return;		/* Don't process bytes passed */
+	}
+	if (failure == -1)
+		return;		/* Packet parsed ok but tty stuff failed */
 
-  if (failure == -1)
-    return;			/* Packet parsed ok but tty stuff failed */
-  
-  /* Set the new modes for the terminal. */
-  if (tcsetattr(fd, TCSANOW, &tio) < 0)
-    log("Setting tty modes failed: %.100s", strerror(errno));
-  return;
+	/* Set the new modes for the terminal. */
+	if (tcsetattr(fd, TCSANOW, &tio) < 0)
+		log("Setting tty modes failed: %.100s", strerror(errno));
+	return;
 }