Annotation of src/usr.bin/tmux/tmux.1, Revision 1.117
1.117 ! nicm 1: .\" $OpenBSD: tmux.1,v 1.116 2009/11/03 06:55:49 nicm Exp $
1.1 nicm 2: .\"
3: .\" Copyright (c) 2007 Nicholas Marriott <nicm@users.sourceforge.net>
4: .\"
5: .\" Permission to use, copy, modify, and distribute this software for any
6: .\" purpose with or without fee is hereby granted, provided that the above
7: .\" copyright notice and this permission notice appear in all copies.
8: .\"
9: .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10: .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11: .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12: .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13: .\" WHATSOEVER RESULTING FROM LOSS OF MIND, USE, DATA OR PROFITS, WHETHER
14: .\" IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
15: .\" OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16: .\"
1.117 ! nicm 17: .Dd $Mdocdate: November 3 2009 $
1.1 nicm 18: .Dt TMUX 1
19: .Os
20: .Sh NAME
21: .Nm tmux
1.6 jmc 22: .Nd terminal multiplexer
1.1 nicm 23: .Sh SYNOPSIS
24: .Nm tmux
25: .Bk -words
1.114 nicm 26: .Op Fl 28lquv
1.91 nicm 27: .Op Fl c Ar shell-command
1.1 nicm 28: .Op Fl f Ar file
29: .Op Fl L Ar socket-name
30: .Op Fl S Ar socket-path
31: .Op Ar command Op Ar flags
32: .Ek
33: .Sh DESCRIPTION
34: .Nm
1.59 jmc 35: is a terminal multiplexer:
36: it enables a number of terminals to be created, accessed, and
37: controlled from a single screen.
1.67 jmc 38: .Nm
39: may be detached from a screen
40: and continue running in the background,
41: then later reattached.
1.1 nicm 42: .Pp
1.60 nicm 43: When
44: .Nm
45: is started it creates a new
46: .Em session
47: with a single
48: .Em window
49: and displays it on screen.
50: A status line at the bottom of the screen
51: shows information on the current session
52: and is used to enter interactive commands.
53: .Pp
54: A session is a single collection of
55: .Em pseudo terminals
56: under the management of
57: .Nm .
58: Each session has one or more
59: windows linked to it.
60: A window occupies the entire screen
61: and may be split into rectangular panes,
62: each of which is a separate pseudo terminal
63: (the
64: .Xr pty 4
65: manual page documents the technical details of pseudo terminals).
66: Any number of
67: .Nm
68: instances may connect to the same session,
69: and any number of windows may be present in the same session.
70: Once all sessions are killed,
71: .Nm
72: exits.
73: .Pp
1.64 nicm 74: Each session is persistent and will survive accidental disconnection
1.66 jmc 75: (such as
1.64 nicm 76: .Xr ssh 1
1.67 jmc 77: connection timeout) or intentional detaching (with the
1.64 nicm 78: .Ql C-b d
79: key strokes).
80: .Nm
81: may be reattached using:
82: .Pp
83: .Dl $ tmux attach
1.60 nicm 84: .Pp
1.64 nicm 85: In
86: .Nm ,
87: a session is displayed on screen by a
88: .Em client
89: and all sessions are managed by a single
90: .Em server .
91: The server and each client are separate processes which communicate through a
92: socket in
93: .Pa /tmp .
1.65 nicm 94: .Pp
1.1 nicm 95: The options are as follows:
96: .Bl -tag -width "XXXXXXXXXXXX"
97: .It Fl 2
98: Force
99: .Nm
100: to assume the terminal supports 256 colours.
101: .It Fl 8
102: Like
103: .Fl 2 ,
1.6 jmc 104: but indicates that the terminal supports 88 colours.
1.91 nicm 105: .It Fl c Ar shell-command
106: Execute
107: .Ar shell-command
108: using the default shell.
109: If necessary, the
110: .Nm
111: server will be started to retrieve the
112: .Ic default-shell
113: option.
1.1 nicm 114: .It Fl f Ar file
115: Specify an alternative configuration file.
116: By default,
117: .Nm
1.26 nicm 118: loads the system configuration file from
119: .Pa /etc/tmux.conf ,
120: if present, then looks for a user configuration file at
1.1 nicm 121: .Pa ~/.tmux.conf .
122: The configuration file is a set of
123: .Nm
124: commands which are executed in sequence when the server is first started.
1.61 nicm 125: .Pp
126: If a command in the configuration file fails,
127: .Nm
128: will report an error and exit without executing further commands.
1.82 nicm 129: .It Fl l
130: Behave as a login shell.
131: This flag currently has no effect and is for compatibility with other shells
132: when using tmux as a login shell.
1.1 nicm 133: .It Fl L Ar socket-name
134: .Nm
135: stores the server socket in a directory under
136: .Pa /tmp ;
137: the default socket is named
138: .Em default .
139: This option allows a different socket name to be specified, allowing several
140: independent
141: .Nm
142: servers to be run.
143: Unlike
144: .Fl S
145: a full path is not necessary: the sockets are all created in the same
146: directory.
1.2 nicm 147: .Pp
148: If the socket is accidentally removed, the
1.6 jmc 149: .Dv SIGUSR1
1.2 nicm 150: signal may be sent to the
151: .Nm
152: server process to recreate it.
1.4 sobrado 153: .It Fl q
1.6 jmc 154: Prevent the server sending various informational messages, for example when
1.4 sobrado 155: window flags are altered.
1.1 nicm 156: .It Fl S Ar socket-path
157: Specify a full alternative path to the server socket.
158: If
159: .Fl S
160: is specified, the default socket directory is not used and any
161: .Fl L
162: flag is ignored.
163: .It Fl u
164: .Nm
1.14 nicm 165: attempts to guess if the terminal is likely to support UTF-8 by checking the
166: first of the
167: .Ev LC_ALL ,
168: .Ev LC_CTYPE
169: and
1.2 nicm 170: .Ev LANG
1.14 nicm 171: environment variables to be set for the string "UTF-8".
1.5 nicm 172: This is not always correct: the
1.2 nicm 173: .Fl u
174: flag explicitly informs
175: .Nm
1.6 jmc 176: that UTF-8 is supported.
1.33 nicm 177: .Pp
178: If the server is started from a client passed
179: .Fl u
180: or where UTF-8 is detected, the
181: .Ic utf8
182: and
183: .Ic status-utf8
184: options are enabled in the global window and session options respectively.
1.1 nicm 185: .It Fl v
186: Request verbose logging.
187: This option may be specified multiple times for increasing verbosity.
188: Log messages will be saved into
189: .Pa tmux-client-PID.log
190: and
191: .Pa tmux-server-PID.log
192: files in the current directory, where
193: .Em PID
1.6 jmc 194: is the PID of the server or client process.
1.1 nicm 195: .It Ar command Op Ar flags
196: This specifies one of a set of commands used to control
197: .Nm ,
1.6 jmc 198: as described in the following sections.
1.59 jmc 199: If no commands are specified, the
1.1 nicm 200: .Ic new-session
201: command is assumed.
1.57 jmc 202: .El
1.64 nicm 203: .Sh KEY BINDINGS
204: .Nm
205: may be controlled from an attached client by using a key combination of a
206: prefix key,
207: .Ql C-b
208: (Ctrl-b) by default, followed by a command key.
209: .Pp
210: Some of the default key bindings are:
211: .Pp
1.67 jmc 212: .Bl -tag -width Ds -offset indent -compact
1.64 nicm 213: .It c
1.65 nicm 214: Create a new window.
1.64 nicm 215: .It d
1.65 nicm 216: Detach the current client.
1.64 nicm 217: .It l
1.65 nicm 218: Move to the previously selected window.
1.64 nicm 219: .It n
1.65 nicm 220: Change to the next window.
1.64 nicm 221: .It p
1.65 nicm 222: Change to the previous window.
223: .It &
224: Kill the current window.
225: .It ,
226: Rename the current window.
1.64 nicm 227: .It \&?
1.65 nicm 228: List all key bindings.
1.64 nicm 229: .El
230: .Pp
231: A complete list may be obtained with the
232: .Ic list-keys
233: command (bound to
234: .Ql \&?
235: by default).
236: Key bindings may be changed with the
237: .Ic bind-key
238: and
239: .Ic unbind-key
240: commands.
1.57 jmc 241: .Sh COMMANDS
242: This section contains a list of the commands supported by
243: .Nm .
244: Most commands accept the optional
245: .Fl t
246: argument with one of
247: .Ar target-client ,
248: .Ar target-session
249: .Ar target-window ,
250: or
251: .Ar target-pane .
252: These specify the client, session, window or pane which a command should affect.
253: .Ar target-client
254: is the name of the
255: .Xr pty 4
256: file to which the client is connected, for example either of
257: .Pa /dev/ttyp1
258: or
259: .Pa ttyp1
260: for the client attached to
261: .Pa /dev/ttyp1 .
262: If no client is specified, the current client is chosen, if possible, or an
263: error is reported.
264: Clients may be listed with the
265: .Ic list-clients
266: command.
1.1 nicm 267: .Pp
1.57 jmc 268: .Ar target-session
269: is either the name of a session (as listed by the
270: .Ic list-sessions
271: command) or the name of a client with the same syntax as
272: .Ar target-client ,
273: in which case the session attached to the client is used.
274: When looking for the session name,
275: .Nm
276: initially searches for an exact match; if none is found, the session names
277: are checked for any for which
278: .Ar target-session
279: is a prefix or for which it matches as an
280: .Xr fnmatch 3
281: pattern.
282: If a single match is found, it is used as the target session; multiple matches
283: produce an error.
284: If a session is omitted, the current session is used if available; if no
1.117 ! nicm 285: current session is available, the most recently used is chosen.
1.1 nicm 286: .Pp
1.57 jmc 287: .Ar target-window
288: specifies a window in the form
289: .Em session Ns \&: Ns Em window .
290: .Em session
291: follows the same rules as for
292: .Ar target-session ,
293: and
294: .Em window
295: is looked for in order: as a window index, for example mysession:1; as an exact
296: window name, such as mysession:mywindow; then as an
297: .Xr fnmatch 3
298: pattern or the start of a window name, such as mysession:mywin* or
299: mysession:mywin.
300: An empty window name specifies the next unused index if appropriate (for
301: example the
302: .Ic new-window
303: and
304: .Ic link-window
305: commands)
306: otherwise the current window in
307: .Em session
308: is chosen.
309: When the argument does not contain a colon,
310: .Nm
311: first attempts to parse it as window; if that fails, an attempt is made to
312: match a session.
1.1 nicm 313: .Pp
1.57 jmc 314: .Ar target-pane
315: takes a similar form to
316: .Ar target-window
317: but with the optional addition of a period followed by a pane index, for
318: example: mysession:mywindow.1.
319: If the pane index is omitted, the currently active pane in the specified
320: window is used.
321: If neither a colon nor period appears,
1.13 nicm 322: .Nm
1.57 jmc 323: first attempts to use the argument as a pane index; if that fails, it is looked
324: up as for
325: .Ar target-window .
1.15 jmc 326: .Pp
1.57 jmc 327: Multiple commands may be specified together as part of a
328: .Em command sequence .
329: Each command should be separated by spaces and a semicolon;
330: commands are executed sequentially from left to right.
331: A literal semicolon may be included by escaping it with a backslash (for
332: example, when specifying a command sequence to
333: .Ic bind-key ) .
1.13 nicm 334: .Pp
1.57 jmc 335: Examples include:
1.13 nicm 336: .Bd -literal -offset indent
1.57 jmc 337: refresh-client -t/dev/ttyp2
338:
339: rename-session -tfirst newname
340:
341: set-window-option -t:0 monitor-activity on
342:
343: new-window ; split-window -d
1.13 nicm 344: .Ed
1.57 jmc 345: .Sh CLIENTS AND SESSIONS
346: The following commands are available:
347: .Bl -tag -width Ds
348: .It Xo Ic attach-session
349: .Op Fl d
350: .Op Fl t Ar target-session
351: .Xc
352: .D1 (alias: Ic attach )
353: If run from outside
354: .Nm ,
355: create a new client in the current terminal and attach it to
356: .Ar target-session .
357: If used from inside, switch the current client.
358: If
359: .Fl d
360: is specified, any other clients attached to the session are detached.
1.13 nicm 361: .Pp
1.57 jmc 362: If no server is started,
363: .Ic attach-session
364: will attempt to start it; this will fail unless sessions are created in the
365: configuration file.
366: .It Ic detach-client Op Fl t Ar target-client
367: .D1 (alias: Ic detach )
368: Detach the current client if bound to a key, or the specified client with
369: .Fl t .
370: .It Ic has-session Op Fl t Ar target-session
371: .D1 (alias: Ic has )
372: Report an error and exit with 1 if the specified session does not exist.
373: If it does exist, exit with 0.
374: .It Ic kill-server
375: Kill the
1.1 nicm 376: .Nm
1.57 jmc 377: server and clients and destroy all sessions.
378: .It Ic kill-session Op Fl t Ar target-session
379: Destroy the given session, closing any windows linked to it and no other
380: sessions, and detaching all clients attached to it.
381: .It Ic list-clients
382: .D1 (alias: Ic lsc )
383: List all clients attached to the server.
384: .It Ic list-commands
385: .D1 (alias: Ic lscm )
386: List the syntax of all commands supported by
387: .Nm .
388: .It Ic list-sessions
389: .D1 (alias: Ic ls )
390: List all sessions managed by the server.
1.92 nicm 391: .It Xo Ic lock-client
392: .Op Fl t Ar target-client
393: .Xc
394: Lock
395: .Ar target-client ,
396: see the
397: .Ic lock-server
398: command.
399: .It Xo Ic lock-session
400: .Op Fl t Ar target-session
401: .Xc
402: Lock all clients attached to
403: .Ar target-session .
1.57 jmc 404: .It Xo Ic new-session
405: .Op Fl d
406: .Op Fl n Ar window-name
407: .Op Fl s Ar session-name
1.101 nicm 408: .Op Fl t Ar target-session
1.57 jmc 409: .Op Ar command
410: .Xc
411: .D1 (alias: Ic new )
412: Create a new session with name
413: .Ar session-name .
414: The new session is attached to the current terminal unless
415: .Fl d
416: is given.
417: .Ar window-name
1.1 nicm 418: and
1.57 jmc 419: .Ar command
420: are the name of and command to execute in the initial window.
1.68 nicm 421: .Pp
422: If run from a terminal, any
423: .Xr termios 4
424: special characters are saved and used for new windows in the new session.
1.101 nicm 425: .Pp
426: If
427: .Fl t
428: is given, the new session is
429: .Em grouped
430: with
431: .Ar target-session .
432: This means they share the same set of windows - all windows from
433: .Ar target-session
434: are linked to the new session and any subsequent new windows or windows being
435: closed are applied to both sessions.
436: The current and previous window and any session options remain independent and
437: either session may be killed without affecting the other.
438: Giving
439: .Fl n
440: or
441: .Ar command
442: are invalid if
443: .Fl t
444: is used.
1.57 jmc 445: .It Ic refresh-client Op Fl t Ar target-client
446: .D1 (alias: Ic refresh )
447: Refresh the current client if bound to a key, or a single client if one is given
448: with
449: .Fl t .
450: .It Xo Ic rename-session
451: .Op Fl t Ar target-session
452: .Ar new-name
453: .Xc
454: .D1 (alias: Ic rename )
455: Rename the session to
456: .Ar new-name .
457: .It Ic source-file Ar path
458: .D1 (alias: Ic source )
459: Execute commands from
460: .Ar path .
461: .It Ic start-server
462: .D1 (alias: Ic start )
463: Start the
1.1 nicm 464: .Nm
1.57 jmc 465: server, if not already running, without creating any sessions.
466: .It Xo Ic suspend-client
467: .Op Fl c Ar target-client
468: .Xc
469: .D1 (alias: Ic suspendc )
470: Suspend a client by sending
471: .Dv SIGTSTP
472: (tty stop).
473: .It Xo Ic switch-client
474: .Op Fl c Ar target-client
475: .Op Fl t Ar target-session
476: .Xc
477: .D1 (alias: Ic switchc )
478: Switch the current session for client
479: .Ar target-client
480: to
481: .Ar target-session .
482: .El
483: .Sh WINDOWS AND PANES
1.1 nicm 484: A
485: .Nm
486: window may be in one of several modes.
487: The default permits direct access to the terminal attached to the window.
488: The others are:
489: .Bl -tag -width Ds
490: .It Em output mode
491: This is entered when a command which produces output, such as
492: .Ic list-keys ,
493: is executed from a key binding.
494: .It Em copy mode
495: This permits a section of a window or its history to be copied to a
496: .Em paste buffer
497: for later insertion into another window.
498: This mode is entered with the
499: .Ic copy-mode
500: command, bound to
1.113 nicm 501: .Ql \&[
1.1 nicm 502: by default.
503: .El
504: .Pp
1.6 jmc 505: The keys available depend on whether emacs or vi mode is selected
506: (see the
1.1 nicm 507: .Ic mode-keys
508: option).
509: The following keys are supported as appropriate for the mode:
1.98 nicm 510: .Bl -column "FunctionXXXXXXXXXXXX" "viXXXXXXXXX" "emacs" -offset indent
1.1 nicm 511: .It Sy "Function" Ta Sy "vi" Ta Sy "emacs"
1.27 nicm 512: .It Li "Back to indentation" Ta "^" Ta "M-m"
1.1 nicm 513: .It Li "Clear selection" Ta "Escape" Ta "C-g"
514: .It Li "Copy selection" Ta "Enter" Ta "M-w"
515: .It Li "Cursor down" Ta "j" Ta "Down"
1.70 nicm 516: .It Li "Cursor left" Ta "h" Ta "Left"
517: .It Li "Cursor right" Ta "l" Ta "Right"
1.116 nicm 518: .It Li "Cursor to bottom line" Ta "L" Ta ""
519: .It Li "Cursor to middle line" Ta "M" Ta "M-r"
520: .It Li "Cursor to top line" Ta "H" Ta "M-R"
1.70 nicm 521: .It Li "Cursor up" Ta "k" Ta "Up"
1.71 nicm 522: .It Li "Delete entire line" Ta "d" Ta "C-u"
1.70 nicm 523: .It Li "Delete to end of line" Ta "D" Ta "C-k"
1.1 nicm 524: .It Li "End of line" Ta "$" Ta "C-e"
1.94 nicm 525: .It Li "Goto line" Ta ":" Ta "g"
1.116 nicm 526: .It Li "Half page down" Ta "C-d" Ta "M-Down"
527: .It Li "Half page up" Ta "C-u" Ta "M-Up"
1.1 nicm 528: .It Li "Next page" Ta "C-f" Ta "Page down"
529: .It Li "Next word" Ta "w" Ta "M-f"
1.70 nicm 530: .It Li "Paste buffer" Ta "p" Ta "C-y"
1.116 nicm 531: .It Li "Previous page" Ta "C-b" Ta "Page up"
1.1 nicm 532: .It Li "Previous word" Ta "b" Ta "M-b"
533: .It Li "Quit mode" Ta "q" Ta "Escape"
1.98 nicm 534: .It Li "Scroll down" Ta "C-Down or J" Ta "C-Down"
535: .It Li "Scroll up" Ta "C-Up or K" Ta "C-Up"
1.70 nicm 536: .It Li "Search again" Ta "n" Ta "n"
537: .It Li "Search backward" Ta "?" Ta "C-r"
538: .It Li "Search forward" Ta "/" Ta "C-s"
539: .It Li "Start of line" Ta "0" Ta "C-a"
1.1 nicm 540: .It Li "Start selection" Ta "Space" Ta "C-Space"
1.80 nicm 541: .It Li "Transpose chars" Ta "" Ta "C-t"
1.1 nicm 542: .El
543: .Pp
1.48 nicm 544: These key bindings are defined in a set of named tables:
545: .Em vi-edit
546: and
547: .Em emacs-edit
548: for keys used when line editing at the command prompt;
549: .Em vi-choice
550: and
551: .Em emacs-choice
552: for keys used when choosing from lists (such as produced by the
553: .Ic window-choose
554: command) or in output mode; and
555: .Em vi-copy
556: and
557: .Em emacs-copy
1.97 nicm 558: used in copy mode.
1.48 nicm 559: The tables may be viewed with the
560: .Ic list-keys
1.49 nicm 561: command and keys modified or removed with
562: .Ic bind-key
563: and
564: .Ic unbind-key .
1.48 nicm 565: .Pp
1.2 nicm 566: The paste buffer key pastes the first line from the top paste buffer on the
567: stack.
1.57 jmc 568: .Pp
569: The mode commands are as follows:
570: .Bl -tag -width Ds
571: .It Xo Ic copy-mode
572: .Op Fl u
1.72 nicm 573: .Op Fl t Ar target-pane
1.57 jmc 574: .Xc
575: Enter copy mode.
576: The
577: .Fl u
578: option scrolls one page up.
579: .El
1.18 nicm 580: .Pp
1.1 nicm 581: Each window displayed by
582: .Nm
583: may be split into one or more
584: .Em panes ;
585: each pane takes up a certain area of the display and is a separate terminal.
586: A window may be split into panes using the
587: .Ic split-window
588: command.
1.38 nicm 589: Windows may be split horizontally (with the
590: .Fl h
591: flag) or vertically.
592: Panes may be resized with the
593: .Ic resize-pane
1.1 nicm 594: command (bound to
1.38 nicm 595: .Ql C-up ,
596: .Ql C-down
597: .Ql C-left
598: and
599: .Ql C-right
1.1 nicm 600: by default), the current pane may be changed with the
601: .Ic up-pane
602: and
603: .Ic down-pane
604: commands and the
605: .Ic rotate-window
606: and
607: .Ic swap-pane
1.38 nicm 608: commands may be used to swap panes without changing their position.
609: Panes are numbered beginning from zero in the order they are created.
610: .Pp
611: A number of preset
612: .Em layouts
613: are available.
614: These may be selected with the
615: .Ic select-layout
616: command or cycled with
617: .Ic next-layout
618: (bound to
619: .Ql C-space
620: by default); once a layout is chosen, panes within it may be moved and resized as normal.
1.1 nicm 621: .Pp
622: The following layouts are supported:
623: .Bl -tag -width Ds
624: .It Ic even-horizontal
625: Panes are spread out evenly from left to right across the window.
626: .It Ic even-vertical
627: Panes are spread evenly from top to bottom.
1.2 nicm 628: .It Ic main-horizontal
629: A large (main) pane is shown at the top of the window and the remaining panes are
1.6 jmc 630: spread from left to right in the leftover space at the bottom.
1.2 nicm 631: Use the
632: .Em main-pane-height
633: window option to specify the height of the top pane.
1.1 nicm 634: .It Ic main-vertical
1.2 nicm 635: Similar to
636: .Ic main-horizontal
637: but the large pane is placed on the left and the others spread from top to
638: bottom along the right.
639: See the
640: .Em main-pane-width
641: window option.
1.1 nicm 642: .El
1.8 nicm 643: .Pp
1.57 jmc 644: Commands related to windows and panes are as follows:
645: .Bl -tag -width Ds
646: .It Xo Ic break-pane
647: .Op Fl d
648: .Op Fl t Ar target-pane
649: .Xc
650: .D1 (alias: Ic breakp )
651: Break
652: .Ar target-pane
653: off from its containing window to make it the only pane in a new window.
654: If
655: .Fl d
656: is given, the new window does not become the current window.
1.76 nicm 657: .It Xo
658: .Ic choose-client
659: .Op Fl t Ar target-window
660: .Op Ar template
661: .Xc
662: Put a window into client choice mode, allowing a client to be selected
663: interactively from a list.
664: After a client is chosen,
665: .Ql %%
666: is replaced by the client
667: .Xr pty 4
668: path in
669: .Ar template
670: and the result executed as a command.
671: If
672: .Ar template
673: is not given, "detach-client -t '%%'" is used.
1.57 jmc 674: This command works only from inside
675: .Nm .
1.76 nicm 676: .It Xo
677: .Ic choose-session
678: .Op Fl t Ar target-window
679: .Op Ar template
680: .Xc
681: Put a window into session choice mode, where a session may be selected
682: interactively from a list.
683: When one is chosen,
684: .Ql %%
685: is replaced by the session name in
686: .Ar template
687: and the result executed as a command.
688: If
689: .Ar template
690: is not given, "switch-client -t '%%'" is used.
691: This command works only from inside
692: .Nm .
693: .It Xo
694: .Ic choose-window
695: .Op Fl t Ar target-window
696: .Op Ar template
697: .Xc
698: Put a window into window choice mode, where a window may be chosen
699: interactively from a list.
700: After a window is selected,
701: .Ql %%
702: is replaced by the session name and window index in
703: .Ar template
704: and the result executed as a command.
705: If
706: .Ar template
707: is not given, "select-window -t '%%'" is used.
1.57 jmc 708: This command works only from inside
709: .Nm .
1.78 nicm 710: .It Ic display-panes Op Fl t Ar target-client
711: .D1 (alias: Ic displayp)
712: Display a visible indicator of each pane shown by
713: .Ar target-client .
714: See the
715: .Ic display-panes-time
716: and
717: .Ic display-panes-colour
718: session options.
1.84 nicm 719: While the indicator is on screen, a pane may be selected with the
720: .Ql 0
721: to
722: .Ql 9
723: keys.
1.57 jmc 724: .It Ic down-pane Op Fl t Ar target-pane
725: .D1 (alias: Ic downp )
1.111 nicm 726: Change the active pane to the next pane (higher index).
1.57 jmc 727: .It Xo Ic find-window
728: .Op Fl t Ar target-window
729: .Ar match-string
730: .Xc
731: .D1 (alias: Ic findw )
732: Search for the
733: .Xr fnmatch 3
734: pattern
735: .Ar match-string
736: in window names, titles, and visible content (but not history).
737: If only one window is matched, it'll be automatically selected, otherwise a
738: choice list is shown.
739: This command only works from inside
1.1 nicm 740: .Nm .
1.112 nicm 741: .It Xo Ic kill-pane
742: .Op Fl a
743: .Op Fl t Ar target-pane
744: .Xc
1.57 jmc 745: .D1 (alias: Ic killp )
746: Destroy the given pane.
747: If no panes remain in the containing window, it is also destroyed.
1.112 nicm 748: The
749: .Fl a
750: option kills all but the pane given with
751: .Fl t .
1.57 jmc 752: .It Ic kill-window Op Fl t Ar target-window
753: .D1 (alias: Ic killw )
754: Kill the current window or the window at
755: .Ar target-window ,
1.1 nicm 756: removing it from any sessions to which it is linked.
1.56 jmc 757: .It Ic last-window Op Fl t Ar target-session
1.1 nicm 758: .D1 (alias: Ic last )
759: Select the last (previously selected) window.
760: If no
761: .Ar target-session
762: is specified, select the last window of the current session.
763: .It Xo Ic link-window
764: .Op Fl dk
765: .Op Fl s Ar src-window
766: .Op Fl t Ar dst-window
767: .Xc
768: .D1 (alias: Ic linkw )
769: Link the window at
770: .Ar src-window
771: to the specified
772: .Ar dst-window .
773: If
774: .Ar dst-window
775: is specified and no such window exists, the
776: .Ar src-window
777: is linked there.
778: If
779: .Fl k
780: is given and
781: .Ar dst-window
782: exists, it is killed, otherwise an error is generated.
783: If
784: .Fl d
785: is given, the newly linked window is not selected.
1.104 nicm 786: .It Ic list-panes Op Fl t Ar target-window
787: .D1 (alias: Ic lsp )
788: List the panes in the current window or in
789: .Ar target-window .
1.56 jmc 790: .It Ic list-windows Op Fl t Ar target-session
1.1 nicm 791: .D1 (alias: Ic lsw )
792: List windows in the current session or in
793: .Ar target-session .
794: .It Xo Ic move-window
795: .Op Fl d
796: .Op Fl s Ar src-window
797: .Op Fl t Ar dst-window
798: .Xc
799: .D1 (alias: Ic movew )
800: This is similar to
801: .Ic link-window ,
802: except the window at
803: .Ar src-window
804: is moved to
805: .Ar dst-window .
806: .It Xo Ic new-window
1.28 nicm 807: .Op Fl dk
1.1 nicm 808: .Op Fl n Ar window-name
809: .Op Fl t Ar target-window
810: .Op Ar command
811: .Xc
812: .D1 (alias: Ic neww )
813: Create a new window.
814: If
815: .Fl d
816: is given, the session does not make the new window the current window.
817: .Ar target-window
1.28 nicm 818: represents the window to be created; if the target already exists an error is
819: shown, unless the
820: .Fl k
821: flag is used, in which case it is destroyed.
1.1 nicm 822: .Ar command
823: is the command to execute.
824: If
825: .Ar command
826: is not specified, the default command is used.
827: .Pp
828: The
829: .Ev TERM
830: environment variable must be set to
831: .Dq screen
832: for all programs running
833: .Em inside
834: .Nm .
835: New windows will automatically have
836: .Dq TERM=screen
837: added to their environment, but care must be taken not to reset this in shell
838: start-up files.
1.56 jmc 839: .It Ic next-layout Op Fl t Ar target-window
1.1 nicm 840: .D1 (alias: Ic nextl )
841: Move a window to the next layout and rearrange the panes to fit.
842: .It Xo Ic next-window
1.9 nicm 843: .Op Fl a
1.1 nicm 844: .Op Fl t Ar target-session
845: .Xc
846: .D1 (alias: Ic next )
847: Move to the next window in the session.
1.9 nicm 848: If
1.12 jmc 849: .Fl a
1.9 nicm 850: is used, move to the next window with a bell, activity or content alert.
1.107 nicm 851: .It Xo Ic pipe-pane
852: .Op Fl o
853: .Op Fl t Ar target-pane
854: .Op Ar command
855: .Xc
856: .D1 (alias: Ic pipep )
857: Pipe any output sent by the program in
858: .Ar target-pane
859: to a shell command.
860: A pane may only be piped to one command at a time, any existing pipe is
861: closed before
862: .Ar command
863: is executed.
864: If no
865: .Ar command
866: is given, the current pipe (if any) is closed.
867: .Pp
868: The
869: .Fl o
870: option only opens a new pipe if no previous pipe exists, allowing a pipe to
871: be toggled with a single key, for example:
872: .Bd -literal -offset indent
873: bind-key C-p pipe-pane -o 'cat >>~/output'
874: .Ed
1.1 nicm 875: .It Xo Ic previous-window
1.9 nicm 876: .Op Fl a
1.1 nicm 877: .Op Fl t Ar target-session
878: .Xc
879: .D1 (alias: Ic prev )
880: Move to the previous window in the session.
1.9 nicm 881: With
882: .Fl a ,
883: move to the previous window with a bell, activity or content alert.
1.1 nicm 884: .It Xo Ic rename-window
885: .Op Fl t Ar target-window
886: .Ar new-name
887: .Xc
888: .D1 (alias: Ic renamew )
889: Rename the current window, or the window at
890: .Ar target-window
891: if specified, to
892: .Ar new-name .
893: .It Xo Ic resize-pane
1.39 jmc 894: .Op Fl DLRU
1.52 nicm 895: .Op Fl t Ar target-pane
1.1 nicm 896: .Op Ar adjustment
897: .Xc
898: .D1 (alias: Ic resizep )
1.57 jmc 899: Resize a pane, upward with
900: .Fl U
901: (the default), downward with
902: .Fl D ,
903: to the left with
904: .Fl L
905: and to the right with
906: .Fl R .
907: The
908: .Ar adjustment
909: is given in lines or cells (the default is 1).
910: .It Xo Ic respawn-window
911: .Op Fl k
912: .Op Fl t Ar target-window
913: .Op Ar command
914: .Xc
915: .D1 (alias: Ic respawnw )
916: Reactive a window in which the command has exited (see the
917: .Ic remain-on-exit
918: window option).
919: If
920: .Ar command
921: is not given, the command used when the window was created is executed.
922: The window must be already inactive, unless
923: .Fl k
924: is given, in which case any existing command is killed.
925: .It Xo Ic rotate-window
926: .Op Fl DU
927: .Op Fl t Ar target-window
928: .Xc
929: .D1 (alias: Ic rotatew )
930: Rotate the positions of the panes within a window, either upward (numerically
931: lower) with
932: .Fl U
933: or downward (numerically higher).
934: .It Xo Ic select-layout
935: .Op Fl t Ar target-window
936: .Op Ar layout-name
937: .Xc
938: .D1 (alias: selectl )
939: Choose a specific layout for a window.
940: If
941: .Ar layout-name
942: is not given, the last layout used (if any) is reapplied.
943: .It Ic select-pane Op Fl t Ar target-pane
944: .D1 (alias: Ic selectp )
945: Make pane
946: .Ar target-pane
947: the active pane in window
948: .Ar target-window .
949: .It Ic select-window Op Fl t Ar target-window
950: .D1 (alias: Ic selectw )
951: Select the window at
952: .Ar target-window .
953: .It Xo Ic split-window
954: .Op Fl dhv
955: .Oo Fl l
956: .Ar size |
957: .Fl p Ar percentage Oc
958: .Op Fl t Ar target-window
959: .Op Ar command
960: .Xc
961: .D1 (alias: splitw )
962: Creates a new pane by splitting the active pane:
963: .Fl h
964: does a horizontal split and
965: .Fl v
966: a vertical split; if neither is specified,
967: .Fl v
968: is assumed.
969: The
970: .Fl l
971: and
972: .Fl p
973: options specify the size of the new window in lines (for vertical split) or in
974: cells (for horizontal split), or as a percentage, respectively.
975: All other options have the same meaning as in the
976: .Ic new-window
977: command.
978: .It Xo Ic swap-pane
979: .Op Fl dDU
980: .Op Fl s Ar src-pane
981: .Op Fl t Ar dst-pane
982: .Xc
983: .D1 (alias: Ic swapp )
984: Swap two panes.
985: If
986: .Fl U
987: is used and no source pane is specified with
988: .Fl s ,
989: .Ar dst-pane
990: is swapped with the previous pane (before it numerically);
991: .Fl D
992: swaps with the next pane (after it numerically).
993: .It Xo Ic swap-window
994: .Op Fl d
995: .Op Fl s Ar src-window
996: .Op Fl t Ar dst-window
997: .Xc
998: .D1 (alias: Ic swapw )
999: This is similar to
1000: .Ic link-window ,
1001: except the source and destination windows are swapped.
1002: It is an error if no window exists at
1003: .Ar src-window .
1004: .It Xo Ic unlink-window
1.1 nicm 1005: .Op Fl k
1006: .Op Fl t Ar target-window
1007: .Xc
1.57 jmc 1008: .D1 (alias: Ic unlinkw )
1009: Unlink
1010: .Ar target-window .
1011: Unless
1012: .Fl k
1013: is given, a window may be unlinked only if it is linked to multiple sessions -
1014: windows may not be linked to no sessions;
1015: if
1.1 nicm 1016: .Fl k
1.57 jmc 1017: is specified and the window is linked to only one session, it is unlinked and
1018: destroyed.
1019: .It Ic up-pane Op Fl t Ar target-pane
1020: .D1 (alias: Ic upp )
1.111 nicm 1021: Change the active pane to the previous pane (lower index).
1.57 jmc 1022: .El
1023: .Sh KEY BINDINGS
1.93 nicm 1024: .Nm
1025: allows a command to be bound to most keys, with or without a prefix key.
1026: When specifying keys, most represent themselves (for example
1027: .Ql A
1028: to
1.95 jmc 1029: .Ql Z ) .
1.93 nicm 1030: Ctrl keys may be prefixed with
1031: .Ql C-
1032: or
1.95 jmc 1033: .Ql ^ ,
1034: and Alt (meta) with
1.93 nicm 1035: .Ql M- .
1036: In addition, the following special key names are accepted:
1037: .Em BSpace ,
1038: .Em BTab ,
1039: .Em DC
1040: (Delete),
1041: .Em End ,
1042: .Em Enter ,
1043: .Em Escape ,
1044: .Em F1
1045: to
1046: .Em F20 ,
1047: .Em Home ,
1048: .Em IC
1049: (Insert),
1050: .Em NPage
1051: (Page Up),
1052: .Em PPage
1053: (Page Down),
1054: .Em Space ,
1055: and
1056: .Em Tab .
1057: Note that to bind the
1058: .Ql \&"
1059: or
1060: .Ql '
1061: keys, quotation marks are necessary, for example:
1062: .Bd -literal -offset indent
1063: bind-key '"' split-window
1064: bind-key "'" select-prompt
1065: .Ed
1066: .Pp
1.57 jmc 1067: Commands related to key bindings are as follows:
1068: .Bl -tag -width Ds
1069: .It Xo Ic bind-key
1070: .Op Fl cnr
1071: .Op Fl t Ar key-table
1072: .Ar key Ar command Op Ar arguments
1.1 nicm 1073: .Xc
1.57 jmc 1074: .D1 (alias: Ic bind )
1075: Bind key
1076: .Ar key
1077: to
1078: .Ar command .
1079: By default (without
1080: .Fl t )
1081: the primary key bindings are modified (those normally activated with the prefix
1082: key); in this case, if
1083: .Fl n
1084: is specified, it is not necessary to use the prefix key,
1085: .Ar command
1086: is bound to
1087: .Ar key
1088: alone.
1.1 nicm 1089: The
1.57 jmc 1090: .Fl r
1091: flag indicates this key may repeat, see the
1092: .Ic repeat-time
1093: option.
1094: .Pp
1095: If
1096: .Fl t
1097: is present,
1098: .Ar key
1099: is bound in
1100: .Ar key-table :
1101: the binding for command mode with
1102: .Fl c
1103: or for normal mode without.
1104: To view the default bindings and possible commands, see the
1105: .Ic list-keys
1106: command.
1107: .It Ic list-keys Op Fl t Ar key-table
1108: .D1 (alias: Ic lsk )
1109: List all key bindings.
1110: Without
1111: .Fl t
1112: the primary key bindings - those executed when preceded by the prefix key -
1113: are printed.
1114: Keys bound without the prefix key (see
1115: .Ic bind-key
1116: .Fl n )
1117: are enclosed in square brackets.
1118: .Pp
1119: With
1120: .Fl t ,
1121: the key bindings in
1122: .Ar key-table
1123: are listed; this may be one of:
1124: .Em vi-edit ,
1125: .Em emacs-edit ,
1126: .Em vi-choice ,
1127: .Em emacs-choice ,
1128: .Em vi-copy
1129: or
1130: .Em emacs-copy .
1131: .It Xo Ic send-keys
1.72 nicm 1132: .Op Fl t Ar target-pane
1.57 jmc 1133: .Ar key Ar ...
1.1 nicm 1134: .Xc
1.57 jmc 1135: .D1 (alias: Ic send )
1136: Send a key or keys to a window.
1137: Each argument
1138: .Ar key
1139: is the name of the key (such as
1140: .Ql C-a
1141: or
1142: .Ql npage
1143: ) to send; if the string is not recognised as a key, it is sent as a series of
1144: characters.
1145: All arguments are sent sequentially from first to last.
1.72 nicm 1146: .It Ic send-prefix Op Fl t Ar target-pane
1.57 jmc 1147: Send the prefix key to a window as if it was pressed.
1.89 nicm 1148: If multiple prefix keys are configured, only the first is sent.
1.57 jmc 1149: .It Xo Ic unbind-key
1150: .Op Fl cn
1151: .Op Fl t Ar key-table
1152: .Ar key
1.2 nicm 1153: .Xc
1.57 jmc 1154: .D1 (alias: Ic unbind )
1155: Unbind the command bound to
1156: .Ar key .
1157: Without
1158: .Fl t
1159: the primary key bindings are modified; in this case, if
1160: .Fl n
1161: is specified, the command bound to
1162: .Ar key
1163: without a prefix (if any) is removed.
1164: .Pp
1.47 nicm 1165: If
1.57 jmc 1166: .Fl t
1167: is present,
1168: .Ar key
1169: in
1170: .Ar key-table
1171: is unbound: the binding for command mode with
1172: .Fl c
1173: or for normal mode without.
1174: .El
1175: .Sh OPTIONS
1176: The appearance and behaviour of
1177: .Nm
1178: may be modified by changing the value of various options.
1179: There are two types of option:
1180: .Em session options
1181: and
1182: .Em window options .
1183: .Pp
1184: Each individual session may have a set of session options, and there is a
1185: separate set of global session options.
1186: Sessions which do not have a particular option configured inherit the value
1187: from the global session options.
1188: Session options are set or unset with the
1189: .Ic set-option
1190: command and may be listed with the
1191: .Ic show-options
1192: command.
1193: The available session options are listed under the
1194: .Ic set-option
1195: command.
1196: .Pp
1197: Similarly, a set of window options is attached to each window, and there is
1198: a set of global window options from which any unset options are inherited.
1199: Window options are altered with the
1200: .Ic set-window-option
1201: command and can be listed with the
1202: .Ic show-window-options
1203: command.
1204: All window options are documented with the
1205: .Ic set-window-option
1206: command.
1207: .Pp
1208: Commands which set options are as follows:
1209: .Bl -tag -width Ds
1.1 nicm 1210: .It Xo Ic set-option
1.58 nicm 1211: .Op Fl agu
1.1 nicm 1212: .Op Fl t Ar target-session
1213: .Ar option Ar value
1214: .Xc
1215: .D1 (alias: Ic set )
1.18 nicm 1216: Set a session option.
1.58 nicm 1217: With
1218: .Fl a ,
1219: and if the option expects a string,
1220: .Ar value
1221: is appended to the existing setting.
1.1 nicm 1222: If
1223: .Fl g
1.18 nicm 1224: is specified, the global session option is set.
1.1 nicm 1225: The
1226: .Fl u
1227: flag unsets an option, so a session inherits the option from the global
1228: options - it is not possible to unset a global option.
1229: .Pp
1.18 nicm 1230: Available session options are:
1.1 nicm 1231: .Bl -tag -width Ds
1.69 nicm 1232: .It Ic base-index Ar index
1233: Set the base index from which an unused index should be searched when a new
1234: window is created.
1235: The default is zero.
1.1 nicm 1236: .It Xo Ic bell-action
1.56 jmc 1237: .Op Ic any | none | current
1.1 nicm 1238: .Xc
1239: Set action on window bell.
1240: .Ic any
1241: means a bell in any window linked to a session causes a bell in the current
1242: window of that session,
1243: .Ic none
1244: means all bells are ignored and
1245: .Ic current
1246: means only bell in windows other than the current window are ignored.
1247: .It Ic buffer-limit Ar number
1248: Set the number of buffers kept for each session; as new buffers are added to
1249: the top of the stack, old ones are removed from the bottom if necessary to
1250: maintain this maximum length.
1251: .It Ic default-command Ar command
1252: Set the command used for new windows (if not specified when the window is
1253: created) to
1.79 nicm 1254: .Ar command ,
1255: which may be any
1256: .Xr sh 1
1257: command.
1.19 nicm 1258: The default is an empty string, which instructs
1259: .Nm
1.79 nicm 1260: to create a login shell using the value of the
1261: .Ic default-shell
1262: option.
1263: .It Ic default-shell Ar path
1264: Specify the default shell.
1265: This is used as the login shell for new windows when the
1266: .Ic default-command
1267: option is set to empty, and must be the full path of the executable.
1268: When started
1269: .Nm
1270: tries to set a default value from the first suitable of the
1.19 nicm 1271: .Ev SHELL
1.79 nicm 1272: environment variable, the shell returned by
1273: .Xr getpwuid 3 ,
1274: or
1275: .Pa /bin/sh .
1276: This option should be configured when
1277: .Nm
1278: is used as a login shell.
1.1 nicm 1279: .It Ic default-path Ar path
1280: Set the default working directory for processes created from keys, or
1281: interactively from the prompt.
1282: The default is the current working directory when the server is started.
1.22 nicm 1283: .It Ic default-terminal Ar terminal
1284: Set the default terminal for new windows created in this session - the
1285: default value of the
1286: .Ev TERM
1287: environment variable.
1288: For
1289: .Nm
1290: to work correctly, this
1291: .Em must
1292: be set to
1293: .Ql screen
1294: or a derivative of it.
1.78 nicm 1295: .It Ic display-panes-colour Ar colour
1296: Set the colour used for the
1297: .Ic display-panes
1298: command.
1299: .It Ic display-panes-time Ar time
1300: Set the time in milliseconds for which the indicators shown by the
1301: .Ic display-panes
1302: command appear.
1.21 nicm 1303: .It Ic display-time Ar time
1.78 nicm 1304: Set the amount of time for which status line messages and other on-screen
1305: indicators are displayed.
1.21 nicm 1306: .Ar time
1307: is in milliseconds.
1.1 nicm 1308: .It Ic history-limit Ar lines
1309: Set the maximum number of lines held in window history.
1310: This setting applies only to new windows - existing window histories are not
1311: resized and retain the limit at the point they were created.
1312: .It Ic lock-after-time Ar number
1.100 nicm 1313: Lock the session (like the
1314: .Ic lock-session
1.90 nicm 1315: command) after
1.1 nicm 1316: .Ar number
1.100 nicm 1317: seconds of inactivity, or the entire server (all sessions) if the
1318: .Ic lock-server
1319: option is set.
1320: The default is not to lock (set to 0).
1.90 nicm 1321: .It Ic lock-command Ar command
1322: Command to run when locking each client.
1323: The default is to run
1324: .Xr lock 1
1325: with
1326: .Fl np .
1.100 nicm 1327: .It Xo Ic lock-server
1328: .Op Ic on | off
1329: .Xc
1330: If this option is
1.102 nicm 1331: .Ic on
1.100 nicm 1332: (the default),
1333: instead of each session locking individually as each has been
1334: idle for
1.108 jmc 1335: .Ic lock-after-time ,
1336: the entire server will lock after
1.100 nicm 1337: .Em all
1338: sessions would have locked.
1339: This has no effect as a session option; it must be set as a global option.
1.1 nicm 1340: .It Ic message-attr Ar attributes
1341: Set status line message attributes, where
1342: .Ar attributes
1343: is either
1344: .Ic default
1345: or a comma-delimited list of one or more of:
1346: .Ic bright
1347: (or
1348: .Ic bold ) ,
1349: .Ic dim ,
1350: .Ic underscore ,
1351: .Ic blink ,
1352: .Ic reverse ,
1353: .Ic hidden ,
1354: or
1355: .Ic italics .
1356: .It Ic message-bg Ar colour
1357: Set status line message background colour, where
1358: .Ar colour
1359: is one of:
1360: .Ic black ,
1361: .Ic red ,
1362: .Ic green ,
1363: .Ic yellow ,
1364: .Ic blue ,
1365: .Ic magenta ,
1366: .Ic cyan ,
1.85 nicm 1367: .Ic white ,
1368: .Ic colour0
1369: to
1370: .Ic colour255
1371: from the 256-colour palette, or
1.1 nicm 1372: .Ic default .
1373: .It Ic message-fg Ar colour
1374: Set status line message foreground colour.
1.102 nicm 1375: .It Xo Ic mouse-select-pane
1376: .Op Ic on | off
1377: .Xc
1378: If on,
1379: .Nm
1380: captures the mouse and when a window is split into multiple panes the mouse may
1381: be used to select the current pane.
1382: The mouse click is also passed through to the application as normal.
1.89 nicm 1383: .It Ic prefix Ar keys
1384: Set the keys accepted as a prefix key.
1385: .Ar keys
1386: is a comma-separated list of key names, each of which individually behave as
1387: the prefix key.
1.21 nicm 1388: .It Ic repeat-time Ar time
1.1 nicm 1389: Allow multiple commands to be entered without pressing the prefix-key again
1390: in the specified
1.21 nicm 1391: .Ar time
1.1 nicm 1392: milliseconds (the default is 500).
1393: Whether a key repeats may be set when it is bound using the
1394: .Fl r
1395: flag to
1396: .Ic bind-key .
1.52 nicm 1397: Repeat is enabled for the default keys bound to the
1398: .Ic resize-pane
1399: command.
1.1 nicm 1400: .It Xo Ic set-remain-on-exit
1.56 jmc 1401: .Op Ic on | off
1.1 nicm 1402: .Xc
1403: Set the
1404: .Ic remain-on-exit
1405: window option for any windows first created in this session.
1406: .It Xo Ic set-titles
1.56 jmc 1407: .Op Ic on | off
1.1 nicm 1408: .Xc
1.77 stsp 1409: Attempt to set the window title using the \ee]2;...\e007 xterm code if
1.1 nicm 1410: the terminal appears to be an xterm.
1.11 nicm 1411: This option is off by default.
1.6 jmc 1412: Note that elinks
1.1 nicm 1413: will only attempt to set the window title if the STY environment
1414: variable is set.
1.86 nicm 1415: .It Ic set-titles-string Ar string
1416: String used to set the window title if
1417: .Ic set-titles
1418: is on.
1419: Character sequences are replaced as for the
1420: .Ic status-left
1421: option.
1.1 nicm 1422: .It Xo Ic status
1.56 jmc 1423: .Op Ic on | off
1.1 nicm 1424: .Xc
1425: Show or hide the status line.
1426: .It Ic status-attr Ar attributes
1427: Set status line attributes.
1428: .It Ic status-bg Ar colour
1429: Set status line background colour.
1430: .It Ic status-fg Ar colour
1431: Set status line foreground colour.
1432: .It Ic status-interval Ar interval
1433: Update the status bar every
1434: .Ar interval
1435: seconds.
1436: By default, updates will occur every 15 seconds.
1437: A setting of zero disables redrawing at interval.
1.41 nicm 1438: .It Xo Ic status-justify
1.56 jmc 1439: .Op Ic left | centre | right
1.41 nicm 1440: .Xc
1441: Set the position of the window list component of the status line: left, centre
1442: or right justified.
1.1 nicm 1443: .It Xo Ic status-keys
1.56 jmc 1444: .Op Ic vi | emacs
1.1 nicm 1445: .Xc
1.6 jmc 1446: Use vi or emacs-style
1.1 nicm 1447: key bindings in the status line, for example at the command prompt.
1448: Defaults to emacs.
1449: .It Ic status-left Ar string
1450: Display
1451: .Ar string
1452: to the left of the status bar.
1453: .Ar string
1454: will be passed through
1455: .Xr strftime 3
1456: before being used.
1457: By default, the session name is shown.
1458: .Ar string
1.83 nicm 1459: may contain any of the following special character sequences:
1.1 nicm 1460: .Bl -column "Character pair" "Replaced with" -offset indent
1461: .It Sy "Character pair" Ta Sy "Replaced with"
1462: .It Li "#(command)" Ta "First line of command's output"
1.83 nicm 1463: .It Li "#[attributes]" Ta "Colour or attribute change"
1.1 nicm 1464: .It Li "#H" Ta "Hostname of local host"
1.35 nicm 1465: .It Li "#I" Ta "Current window index"
1466: .It Li "#P" Ta "Current pane index"
1.1 nicm 1467: .It Li "#S" Ta "Session name"
1468: .It Li "#T" Ta "Current window title"
1.35 nicm 1469: .It Li "#W" Ta "Current window name"
1.1 nicm 1470: .It Li "##" Ta "A literal" Ql #
1471: .El
1.83 nicm 1472: .Pp
1473: The #(command) form executes
1474: .Ql command
1475: as a shell command and inserts the first line of its output.
1.103 nicm 1476: Note that shell commands are only executed once at the interval specified by
1477: the
1478: .Ic status-interval
1479: option: if the status line is redrawn in the meantime, the previous result is
1480: used.
1.109 nicm 1481: .Pp
1.83 nicm 1482: #[attributes] allows a comma-separated list of attributes to be specified,
1483: these may be
1484: .Ql fg=colour
1485: to set the foreground colour,
1486: .Ql bg=colour
1.109 nicm 1487: to set the background colour, the name of one of the attributes (listed under the
1.83 nicm 1488: .Ic message-attr
1.109 nicm 1489: option) to turn an attribute on, or an attribute prefixed with
1490: .Ql no
1491: to turn one off, for example
1492: .Ic nobright .
1.83 nicm 1493: Examples are:
1494: .Bd -literal -offset indent
1495: #(sysctl vm.loadavg)
1496: #[fg=yellow,bold]#(apm -l)%%#[default] [#S]
1497: .Ed
1.1 nicm 1498: .Pp
1.109 nicm 1499: Where appropriate, special character sequences may be prefixed with a number to
1500: specify the maximum length, for example
1.1 nicm 1501: .Ql #24T .
1.10 nicm 1502: .Pp
1.12 jmc 1503: By default, UTF-8 in
1.10 nicm 1504: .Ar string
1505: is not interpreted, to enable UTF-8, use the
1506: .Ic status-utf8
1507: option.
1.62 nicm 1508: .It Ic status-left-attr Ar attributes
1.66 jmc 1509: Set the attribute of the left part of the status line.
1.62 nicm 1510: .It Ic status-left-fg Ar colour
1511: Set the foreground colour of the left part of the status line.
1512: .It Ic status-left-bg Ar colour
1513: Set the background colour of the left part of the status line.
1.1 nicm 1514: .It Ic status-left-length Ar length
1515: Set the maximum
1516: .Ar length
1517: of the left component of the status bar.
1518: The default is 10.
1519: .It Ic status-right Ar string
1520: Display
1521: .Ar string
1522: to the right of the status bar.
1523: By default, the date and time will be shown.
1524: As with
1525: .Ic status-left ,
1526: .Ar string
1527: will be passed to
1.10 nicm 1528: .Xr strftime 3 ,
1529: character pairs are replaced, and UTF-8 is dependent on the
1530: .Ic status-utf8
1531: option.
1.62 nicm 1532: .It Ic status-right-attr Ar attributes
1.66 jmc 1533: Set the attribute of the right part of the status line.
1.62 nicm 1534: .It Ic status-right-fg Ar colour
1535: Set the foreground colour of the right part of the status line.
1536: .It Ic status-right-bg Ar colour
1537: Set the background colour of the right part of the status line.
1.1 nicm 1538: .It Ic status-right-length Ar length
1539: Set the maximum
1540: .Ar length
1541: of the right component of the status bar.
1542: The default is 40.
1.10 nicm 1543: .Pp
1544: .It Xo Ic status-utf8
1.56 jmc 1545: .Op Ic on | off
1.10 nicm 1546: .Xc
1547: Instruct
1548: .Nm
1549: to treat top-bit-set characters in the
1550: .Ic status-left
1551: and
1552: .Ic status-right
1553: strings as UTF-8; notably, this is important for wide characters.
1554: This option defaults to off.
1.55 jmc 1555: .It Ic terminal-overrides Ar string
1.54 nicm 1556: Contains a list of entries which override terminal descriptions read using
1557: .Xr terminfo 5 .
1558: .Ar string
1559: is a comma-separated list of items each a colon-separated string made up of a
1560: terminal type pattern (matched using
1561: .Xr fnmatch 3 )
1562: and a set of
1563: .Em name=value
1564: entries.
1565: .Pp
1566: For example, to set the
1567: .Ql clear
1568: .Xr terminfo 5
1569: entry to
1570: .Ql \ee[H\ee[2J
1571: for all terminal types and the
1572: .Ql dch1
1573: entry to
1574: .Ql \ee[P
1.55 jmc 1575: for the
1.54 nicm 1576: .Ql rxvt
1577: terminal type, the option could be set to the string:
1578: .Bd -literal -offset indent
1579: "*:clear=\ee[H\ee[2J,rxvt:dch1=\ee[P"
1580: .Ed
1581: .Pp
1582: The terminal entry value is passed through
1583: .Xr strunvis 3
1584: before interpretation.
1585: The default value forcibly corrects the
1586: .Ql colors
1587: entry for terminals which support 88 or 256 colours:
1588: .Bd -literal -offset indent
1589: "*88col*:colors=88,*256col*:colors=256"
1590: .Ed
1.63 nicm 1591: .It Ic update-environment Ar variables
1592: Set a space-separated string containing a list of environment variables to be
1593: copied into the session environment when a new session is created or an
1594: existing session is attached.
1595: Any variables that do not exist in the source environment are set to be
1596: removed from the session environment (as if
1597: .Fl r
1598: was given to the
1599: .Ic set-environment
1600: command).
1601: The default is
1.75 nicm 1602: "DISPLAY WINDOWID SSH_ASKPASS SSH_AUTH_SOCK SSH_AGENT_PID SSH_CONNECTION".
1.37 nicm 1603: .It Xo Ic visual-activity
1.56 jmc 1604: .Op Ic on | off
1.37 nicm 1605: .Xc
1606: If on, display a status line message when activity occurs in a window
1.39 jmc 1607: for which the
1.37 nicm 1608: .Ic monitor-activity
1609: window option is enabled.
1610: .It Xo Ic visual-bell
1.56 jmc 1611: .Op Ic on | off
1.37 nicm 1612: .Xc
1613: If this option is on, a message is shown on a bell instead of it being passed
1614: through to the terminal (which normally makes a sound).
1615: Also see the
1616: .Ic bell-action
1617: option.
1618: .It Xo Ic visual-content
1.56 jmc 1619: .Op Ic on | off
1.37 nicm 1620: .Xc
1621: Like
1622: .Ic visual-activity ,
1623: display a message when content is present in a window
1.39 jmc 1624: for which the
1.37 nicm 1625: .Ic monitor-content
1626: window option is enabled.
1.1 nicm 1627: .El
1628: .It Xo Ic set-window-option
1.58 nicm 1629: .Op Fl agu
1.1 nicm 1630: .Op Fl t Ar target-window
1631: .Ar option Ar value
1632: .Xc
1633: .D1 (alias: Ic setw )
1.18 nicm 1634: Set a window option.
1.1 nicm 1635: The
1.58 nicm 1636: .Fl a ,
1.1 nicm 1637: .Fl g
1638: and
1639: .Fl u
1640: flags work similarly to the
1641: .Ic set-option
1642: command.
1643: .Pp
1.18 nicm 1644: Supported window options are:
1.56 jmc 1645: .Pp
1646: .Bl -tag -width Ds -compact
1.1 nicm 1647: .It Xo Ic aggressive-resize
1.56 jmc 1648: .Op Ic on | off
1.1 nicm 1649: .Xc
1650: Aggressively resize the chosen window.
1651: This means that
1652: .Nm
1653: will resize the window to the size of the smallest session for which it is the
1654: current window, rather than the smallest session to which it is attached.
1655: The window may resize when the current window is changed on another sessions;
1.6 jmc 1656: this option is good for full-screen programs which support
1657: .Dv SIGWINCH
1658: and poor for interactive programs such as shells.
1.56 jmc 1659: .Pp
1.1 nicm 1660: .It Xo Ic automatic-rename
1.56 jmc 1661: .Op Ic on | off
1.1 nicm 1662: .Xc
1663: Control automatic window renaming.
1664: When this setting is enabled,
1665: .Nm
1666: will attempt - on supported platforms - to rename the window to reflect the
1667: command currently running in it.
1668: This flag is automatically disabled for an individual window when a name
1669: is specified at creation with
1670: .Ic new-window or
1671: .Ic new-session ,
1672: or later with
1673: .Ic rename-window .
1674: It may be switched off globally with:
1675: .Bd -literal -offset indent
1676: set-window-option -g automatic-rename off
1677: .Ed
1.56 jmc 1678: .Pp
1.1 nicm 1679: .It Ic clock-mode-colour Ar colour
1680: Set clock colour.
1.56 jmc 1681: .Pp
1.1 nicm 1682: .It Xo Ic clock-mode-style
1.56 jmc 1683: .Op Ic 12 | 24
1.1 nicm 1684: .Xc
1685: Set clock hour format.
1.56 jmc 1686: .Pp
1.1 nicm 1687: .It Ic force-height Ar height
1688: .It Ic force-width Ar width
1689: Prevent
1690: .Nm
1691: from resizing a window to greater than
1692: .Ar width
1693: or
1694: .Ar height .
1695: A value of zero restores the default unlimited setting.
1.56 jmc 1696: .Pp
1.2 nicm 1697: .It Ic main-pane-width Ar width
1698: .It Ic main-pane-height Ar height
1699: Set the width or height of the main (left or top) pane in the
1700: .Ic main-horizontal
1701: or
1702: .Ic main-vertical
1703: layouts.
1.56 jmc 1704: .Pp
1.1 nicm 1705: .It Ic mode-attr Ar attributes
1706: Set window modes attributes.
1.56 jmc 1707: .Pp
1.1 nicm 1708: .It Ic mode-bg Ar colour
1709: Set window modes background colour.
1.56 jmc 1710: .Pp
1.1 nicm 1711: .It Ic mode-fg Ar colour
1712: Set window modes foreground colour.
1.56 jmc 1713: .Pp
1.1 nicm 1714: .It Xo Ic mode-keys
1.56 jmc 1715: .Op Ic vi | emacs
1.1 nicm 1716: .Xc
1.105 nicm 1717: Use vi or emacs-style key bindings in copy and choice modes.
1.1 nicm 1718: Key bindings default to emacs.
1.56 jmc 1719: .Pp
1.50 nicm 1720: .It Xo Ic mode-mouse
1.56 jmc 1721: .Op Ic on | off
1.50 nicm 1722: .Xc
1.51 jmc 1723: Mouse state in modes.
1724: If on,
1.50 nicm 1725: .Nm
1726: will respond to mouse clicks by moving the cursor in copy mode or selecting an
1727: option in choice mode.
1.56 jmc 1728: .Pp
1.1 nicm 1729: .It Xo Ic monitor-activity
1.56 jmc 1730: .Op Ic on | off
1.1 nicm 1731: .Xc
1732: Monitor for activity in the window.
1733: Windows with activity are highlighted in the status line.
1.56 jmc 1734: .Pp
1735: .It Ic monitor-content Ar match-string
1.6 jmc 1736: Monitor content in the window.
1737: When
1.16 nicm 1738: .Xr fnmatch 3
1739: pattern
1.1 nicm 1740: .Ar match-string
1741: appears in the window, it is highlighted in the status line.
1.56 jmc 1742: .Pp
1.1 nicm 1743: .It Xo Ic remain-on-exit
1.56 jmc 1744: .Op Ic on | off
1.1 nicm 1745: .Xc
1746: A window with this flag set is not destroyed when the program running in it
1747: exits.
1748: The window may be reactivated with the
1749: .Ic respawn-window
1750: command.
1.56 jmc 1751: .Pp
1.99 nicm 1752: .It Xo Ic synchronize-panes
1753: .Op Ic on | off
1754: .Xc
1755: Duplicate input to any pane to all other panes in the same window, except
1756: for panes that are not in output mode.
1.1 nicm 1757: .It Xo Ic utf8
1.56 jmc 1758: .Op Ic on | off
1.1 nicm 1759: .Xc
1760: Instructs
1761: .Nm
1762: to expect UTF-8 sequences to appear in this window.
1.56 jmc 1763: .Pp
1.1 nicm 1764: .It Ic window-status-attr Ar attributes
1765: Set status line attributes for a single window.
1.56 jmc 1766: .Pp
1.1 nicm 1767: .It Ic window-status-bg Ar colour
1768: Set status line background colour for a single window.
1.56 jmc 1769: .Pp
1.1 nicm 1770: .It Ic window-status-fg Ar colour
1771: Set status line foreground colour for a single window.
1.56 jmc 1772: .Pp
1.40 nicm 1773: .It Ic window-status-current-attr Ar attributes
1774: Set status line attributes for the currently active window.
1.56 jmc 1775: .Pp
1.40 nicm 1776: .It Ic window-status-current-bg Ar colour
1777: Set status line background colour for the currently active window.
1.56 jmc 1778: .Pp
1.40 nicm 1779: .It Ic window-status-current-fg Ar colour
1780: Set status line foreground colour for the currently active window.
1.56 jmc 1781: .Pp
1.1 nicm 1782: .It Xo Ic xterm-keys
1.56 jmc 1783: .Op Ic on | off
1.1 nicm 1784: .Xc
1785: If this option is set,
1786: .Nm
1787: will generate
1.57 jmc 1788: .Xr xterm 1 -style
1789: function key sequences; these have a number included to indicate modifiers such
1790: as Shift, Alt or Ctrl.
1791: .El
1792: .It Xo Ic show-options
1793: .Op Fl g
1794: .Op Fl t Ar target-session
1795: .Xc
1796: .D1 (alias: Ic show )
1797: Show the session options for
1798: .Ar target session ,
1799: or the global session options with
1800: .Fl g .
1801: .It Xo Ic show-window-options
1802: .Op Fl g
1803: .Op Fl t Ar target-window
1804: .Xc
1805: .D1 (alias: Ic showw )
1806: List the window options for
1807: .Ar target-window ,
1808: or the global window options if
1809: .Fl g
1810: is used.
1.63 nicm 1811: .El
1812: .Sh ENVIRONMENT
1813: When the server is started,
1814: .Nm
1815: copies the environment into the
1816: .Em global environment ;
1817: in addition, each session has a
1818: .Em session environment .
1819: When a window is created, the session and global environments are merged with
1820: the session environment overriding any variable present in both.
1821: This is the initial environment passed to the new process.
1822: .Pp
1823: The
1824: .Ic update-environment
1825: session option may be used to update the session environment from the client
1826: when a new session is created or an old reattached.
1827: .Nm
1828: also initialises the
1829: .Ev TMUX
1830: variable with some internal information to allow commands to be executed
1831: from inside, and the
1832: .Ev TERM
1833: variable with the correct terminal setting of
1834: .Ql screen .
1835: .Pp
1836: Commands to alter and view the environment are:
1837: .Bl -tag -width Ds
1838: .It Xo Ic set-environment
1839: .Op Fl gru
1840: .Op Fl t Ar target-session
1841: .Ar name Op Ar value
1842: .Xc
1.115 nicm 1843: .D1 (alias: Ic setenv )
1.63 nicm 1844: Set or unset an environment variable.
1845: If
1846: .Fl g
1847: is used, the change is made in the global environment; otherwise, it is applied
1848: to the session environment for
1849: .Ar target-session .
1850: The
1851: .Fl u
1852: flag unsets a variable.
1853: .Fl r
1854: indicates the variable is to be removed from the environment before starting a
1855: new process.
1856: .It Xo Ic show-environment
1857: .Op Fl g
1858: .Op Fl t Ar target-session
1859: .Xc
1.115 nicm 1860: .D1 (alias: Ic showenv )
1.63 nicm 1861: Display the environment for
1862: .Ar target-session
1863: or the global environment with
1864: .Fl g .
1865: Variables removed from the environment are prefixed with
1866: .Ql - .
1.57 jmc 1867: .El
1868: .Sh STATUS LINE
1869: .Nm
1870: includes an optional status line which is displayed in the bottom line of each
1871: terminal.
1872: By default, the status line is enabled (it may be disabled with the
1873: .Ic status
1874: session option) and contains, from left-to-right: the name of the current
1875: session in square brackets; the window list; the current window title in double
1876: quotes; and the time and date.
1877: .Pp
1878: The status line is made of three parts: configurable left and right sections
1879: (which may contain dynamic content such as the time or output from a shell
1880: command, see the
1881: .Ic status-left ,
1882: .Ic status-left-length ,
1883: .Ic status-right ,
1884: and
1885: .Ic status-right-length
1886: options below), and a central window list.
1887: The window list shows the index, name and (if any) flag of the windows
1888: present in the current session in ascending numerical order.
1889: The flag is one of the following symbols appended to the window name:
1890: .Bl -column "Symbol" "Meaning" -offset indent
1891: .It Sy "Symbol" Ta Sy "Meaning"
1892: .It Li "*" Ta "Denotes the current window."
1893: .It Li "-" Ta "Marks the last window (previously selected)."
1894: .It Li "#" Ta "Window is monitored and activity has been detected."
1895: .It Li "!" Ta "A bell has occurred in the window."
1896: .It Li "+" Ta "Window is monitored for content and it has appeared."
1897: .El
1898: .Pp
1899: The # symbol relates to the
1900: .Ic monitor-activity
1901: and + to the
1902: .Ic monitor-content
1903: window options.
1904: The window name is printed in inverted colours if an alert (bell, activity or
1905: content) is present.
1906: .Pp
1907: The colour and attributes of the status line may be configured, the entire status line using
1908: the
1909: .Ic status-attr ,
1910: .Ic status-fg
1911: and
1912: .Ic status-bg
1913: session options and individual windows using the
1914: .Ic window-status-attr ,
1915: .Ic window-status-fg
1916: and
1917: .Ic window-status-bg
1918: window options.
1919: .Pp
1920: The status line is automatically refreshed at interval if it has changed, the interval may be
1921: controlled with the
1922: .Ic status-interval
1923: session option.
1924: .Pp
1925: Commands related to the status line are as follows:
1926: .Bl -tag -width Ds
1927: .It Xo Ic command-prompt
1.73 nicm 1928: .Op Fl p Ar prompts
1.57 jmc 1929: .Op Fl t Ar target-client
1930: .Op Ar template
1931: .Xc
1932: Open the command prompt in a client.
1933: This may be used from inside
1934: .Nm
1935: to execute commands interactively.
1936: If
1937: .Ar template
1.73 nicm 1938: is specified, it is used as the command.
1939: If
1940: .Fl p
1941: is given,
1942: .Ar prompts
1943: is a comma-separated list of prompts which are displayed in order; otherwise
1944: a single prompt is displayed, constructed from
1945: .Ar template
1946: if it is present, or
1947: .Ql \&:
1948: if not.
1949: Before the command is executed, the first occurrence of the string
1950: .Ql %%
1.74 jmc 1951: and all occurrences of
1.73 nicm 1952: .Ql %1
1953: are replaced by the response to the first prompt, the second
1954: .Ql %%
1955: and all
1956: .Ql %2
1957: are replaced with the response to the second prompt, and so on for further
1.74 jmc 1958: prompts.
1959: Up to nine prompt responses may be replaced
1960: .Po
1961: .Ql %1
1.73 nicm 1962: to
1.74 jmc 1963: .Ql %9
1964: .Pc .
1.57 jmc 1965: .It Xo Ic confirm-before
1966: .Op Fl t Ar target-client
1967: .Ar command
1968: .Xc
1969: .D1 (alias: Ic confirm )
1970: Ask for confirmation before executing
1971: .Ar command .
1972: This command works only from inside
1973: .Nm .
1974: .It Xo Ic display-message
1975: .Op Fl t Ar target-client
1976: .Op Ar message
1977: .Xc
1978: .D1 (alias: Ic display )
1979: Display a message (see the
1980: .Ic status-left
1981: option below)
1982: in the status line.
1983: .It Ic select-prompt Op Fl t Ar target-client
1984: Open a prompt inside
1985: .Ar target-client
1986: allowing a window index to be entered interactively.
1987: .El
1988: .Sh BUFFERS
1989: .Nm
1990: maintains a stack of
1991: .Em paste buffers
1992: for each session.
1993: Up to the value of the
1994: .Ic buffer-limit
1995: option are kept; when a new buffer is added, the buffer at the bottom of the
1996: stack is removed.
1997: Buffers may be added using
1998: .Ic copy-mode
1999: or the
2000: .Ic set-buffer
2001: command, and pasted into a window using the
2002: .Ic paste-buffer
2003: command.
2004: .Pp
2005: A configurable history buffer is also maintained for each window.
2006: By default, up to 2000 lines are kept; this can be altered with the
2007: .Ic history-limit
2008: option (see the
2009: .Ic set-option
2010: command above).
2011: .Pp
2012: The buffer commands are as follows:
2013: .Bl -tag -width Ds
2014: .It Ic clear-history Op Fl t Ar target-pane
2015: .D1 (alias: Ic clearhist )
2016: Remove and free the history for the specified pane.
2017: .It Xo Ic copy-buffer
2018: .Op Fl a Ar src-index
2019: .Op Fl b Ar dst-index
2020: .Op Fl s Ar src-session
2021: .Op Fl t Ar dst-session
2022: .Xc
2023: .D1 (alias: Ic copyb )
2024: Copy a session paste buffer to another session.
2025: If no sessions are specified, the current one is used instead.
2026: .It Xo Ic delete-buffer
2027: .Op Fl b Ar buffer-index
2028: .Op Fl t Ar target-session
2029: .Xc
2030: .D1 (alias: Ic deleteb )
2031: Delete the buffer at
2032: .Ar buffer-index ,
2033: or the top buffer if not specified.
2034: .It Ic list-buffers Op Fl t Ar target-session
2035: .D1 (alias: Ic lsb )
2036: List the buffers in the given session.
2037: .It Xo Ic load-buffer
2038: .Op Fl b Ar buffer-index
2039: .Op Fl t Ar target-session
2040: .Ar path
2041: .Xc
2042: .D1 (alias: Ic loadb )
2043: Load the contents of the specified paste buffer from
2044: .Ar path .
2045: .It Xo Ic paste-buffer
2046: .Op Fl dr
2047: .Op Fl b Ar buffer-index
2048: .Op Fl t Ar target-window
2049: .Xc
2050: .D1 (alias: Ic pasteb )
2051: Insert the contents of a paste buffer into the current window.
2052: With
2053: .Fl d ,
2054: also delete the paste buffer from the stack.
2055: When output, any linefeed (LF) characters in the paste buffer are replaced with
2056: carriage returns (CR).
2057: This translation may be disabled with the
2058: .Fl r
2059: flag.
2060: .It Xo Ic save-buffer
2061: .Op Fl a
2062: .Op Fl b Ar buffer-index
2063: .Op Fl t Ar target-session
2064: .Ar path
2065: .Xc
2066: .D1 (alias: Ic saveb )
2067: Save the contents of the specified paste buffer to
2068: .Ar path .
2069: The
2070: .Fl a
2071: option appends to rather than overwriting the file.
2072: .It Xo Ic set-buffer
2073: .Op Fl b Ar buffer-index
2074: .Op Fl t Ar target-session
2075: .Ar data
2076: .Xc
2077: .D1 (alias: Ic setb )
2078: Set the contents of the specified buffer to
2079: .Ar data .
1.1 nicm 2080: .It Xo Ic show-buffer
2081: .Op Fl b Ar buffer-index
2082: .Op Fl t Ar target-session
2083: .Xc
2084: .D1 (alias: Ic showb )
2085: Display the contents of the specified buffer.
1.57 jmc 2086: .El
2087: .Sh MISCELLANEOUS
2088: .Pp
2089: Miscellaneous commands are as follows:
2090: .Bl -tag -width Ds
1.72 nicm 2091: .It Ic clock-mode Op Fl t Ar target-pane
1.57 jmc 2092: Display a large clock.
2093: .It Ic if-shell Ar shell-command command
2094: .D1 (alias: Ic if )
2095: Execute
2096: .Ar command
2097: if
2098: .Ar shell-command
2099: returns success.
2100: .It Ic lock-server
2101: .D1 (alias: Ic lock )
1.90 nicm 2102: Lock each client individually by running the command specified by the
2103: .Ic lock-command
2104: option.
1.87 nicm 2105: .It Ic run-shell Ar command
2106: .D1 (alias: Ic run )
2107: Execute
2108: .Ar command
1.106 nicm 2109: in the background without creating a window.
2110: After the command finishes, any output to stdout is displayed in output mode.
1.87 nicm 2111: If
1.88 jmc 2112: .Ar command
1.87 nicm 2113: doesn't return success, the exit status is also displayed.
1.57 jmc 2114: .It Ic server-info
2115: .D1 (alias: Ic info )
2116: Show server information and terminal details.
1.1 nicm 2117: .El
2118: .Sh FILES
1.26 nicm 2119: .Bl -tag -width "/etc/tmux.confXXX" -compact
1.1 nicm 2120: .It Pa ~/.tmux.conf
1.6 jmc 2121: Default
1.1 nicm 2122: .Nm
1.6 jmc 2123: configuration file.
1.26 nicm 2124: .It Pa /etc/tmux.conf
2125: System-wide configuration file.
1.1 nicm 2126: .El
1.57 jmc 2127: .Sh EXAMPLES
2128: To create a new
2129: .Nm
2130: session running
2131: .Xr vi 1 :
2132: .Pp
2133: .Dl $ tmux new-session vi
2134: .Pp
2135: Most commands have a shorter form, known as an alias.
2136: For new-session, this is
2137: .Ic new :
2138: .Pp
2139: .Dl $ tmux new vi
2140: .Pp
2141: Alternatively, the shortest unambiguous form of a command is accepted.
2142: If there are several options, they are listed:
2143: .Bd -literal -offset indent
2144: $ tmux n
2145: ambiguous command: n, could be: new-session, new-window, next-window
2146: .Ed
2147: .Pp
2148: Within an active session, a new window may be created by typing
2149: .Ql C-b c
2150: (Ctrl
2151: followed by the
2152: .Ql b
2153: key
2154: followed by the
2155: .Ql c
2156: key).
2157: .Pp
2158: Windows may be navigated with:
2159: .Ql C-b 0
2160: (to select window 0),
2161: .Ql C-b 1
2162: (to select window 1), and so on;
2163: .Ql C-b n
2164: to select the next window; and
2165: .Ql C-b p
2166: to select the previous window.
2167: .Pp
2168: A session may be detached using
2169: .Ql C-b d
1.64 nicm 2170: (or by an external event such as
2171: .Xr ssh 1
2172: disconnection) and reattached with:
1.57 jmc 2173: .Pp
2174: .Dl $ tmux attach-session
2175: .Pp
2176: Typing
2177: .Ql C-b \&?
2178: lists the current key bindings in the current window; up and down may be used
2179: to navigate the list or
2180: .Ql q
2181: to exit from it.
2182: .Pp
2183: Commands to be run when the
2184: .Nm
2185: server is started may be placed in the
2186: .Pa ~/.tmux.conf
2187: configuration file.
2188: Common examples include:
2189: .Pp
2190: Changing the default prefix key:
2191: .Bd -literal -offset indent
2192: set-option -g prefix C-a
2193: unbind-key C-b
2194: bind-key C-a send-prefix
2195: .Ed
2196: .Pp
2197: Turning the status line off, or changing its colour:
2198: .Bd -literal -offset indent
2199: set-option -g status off
2200: set-option -g status-bg blue
2201: .Ed
2202: .Pp
2203: Setting other options, such as the default command,
2204: or locking after 30 minutes of inactivity:
2205: .Bd -literal -offset indent
2206: set-option -g default-command "exec /bin/ksh"
2207: set-option -g lock-after-time 1800
2208: .Ed
2209: .Pp
2210: Creating new key bindings:
2211: .Bd -literal -offset indent
2212: bind-key b set-option status
2213: bind-key / command-prompt "split-window 'exec man %%'"
1.73 nicm 2214: bind-key S command-prompt "new-window -n %1 'ssh %1'"
1.57 jmc 2215: .Ed
1.1 nicm 2216: .Sh SEE ALSO
2217: .Xr pty 4
2218: .Sh AUTHORS
2219: .An Nicholas Marriott Aq nicm@users.sourceforge.net