Annotation of src/usr.bin/tmux/tmux.1, Revision 1.126
1.126 ! nicm 1: .\" $OpenBSD: tmux.1,v 1.125 2009/11/19 16:22:10 nicm Exp $
1.1 nicm 2: .\"
3: .\" Copyright (c) 2007 Nicholas Marriott <nicm@users.sourceforge.net>
4: .\"
5: .\" Permission to use, copy, modify, and distribute this software for any
6: .\" purpose with or without fee is hereby granted, provided that the above
7: .\" copyright notice and this permission notice appear in all copies.
8: .\"
9: .\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10: .\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11: .\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
12: .\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13: .\" WHATSOEVER RESULTING FROM LOSS OF MIND, USE, DATA OR PROFITS, WHETHER
14: .\" IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
15: .\" OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16: .\"
1.123 nicm 17: .Dd $Mdocdate: November 19 2009 $
1.1 nicm 18: .Dt TMUX 1
19: .Os
20: .Sh NAME
21: .Nm tmux
1.6 jmc 22: .Nd terminal multiplexer
1.1 nicm 23: .Sh SYNOPSIS
24: .Nm tmux
25: .Bk -words
1.114 nicm 26: .Op Fl 28lquv
1.91 nicm 27: .Op Fl c Ar shell-command
1.1 nicm 28: .Op Fl f Ar file
29: .Op Fl L Ar socket-name
30: .Op Fl S Ar socket-path
31: .Op Ar command Op Ar flags
32: .Ek
33: .Sh DESCRIPTION
34: .Nm
1.59 jmc 35: is a terminal multiplexer:
36: it enables a number of terminals to be created, accessed, and
37: controlled from a single screen.
1.67 jmc 38: .Nm
39: may be detached from a screen
40: and continue running in the background,
41: then later reattached.
1.1 nicm 42: .Pp
1.60 nicm 43: When
44: .Nm
45: is started it creates a new
46: .Em session
47: with a single
48: .Em window
49: and displays it on screen.
50: A status line at the bottom of the screen
51: shows information on the current session
52: and is used to enter interactive commands.
53: .Pp
54: A session is a single collection of
55: .Em pseudo terminals
56: under the management of
57: .Nm .
58: Each session has one or more
59: windows linked to it.
60: A window occupies the entire screen
61: and may be split into rectangular panes,
62: each of which is a separate pseudo terminal
63: (the
64: .Xr pty 4
65: manual page documents the technical details of pseudo terminals).
66: Any number of
67: .Nm
68: instances may connect to the same session,
69: and any number of windows may be present in the same session.
70: Once all sessions are killed,
71: .Nm
72: exits.
73: .Pp
1.64 nicm 74: Each session is persistent and will survive accidental disconnection
1.66 jmc 75: (such as
1.64 nicm 76: .Xr ssh 1
1.67 jmc 77: connection timeout) or intentional detaching (with the
1.64 nicm 78: .Ql C-b d
79: key strokes).
80: .Nm
81: may be reattached using:
82: .Pp
83: .Dl $ tmux attach
1.60 nicm 84: .Pp
1.64 nicm 85: In
86: .Nm ,
87: a session is displayed on screen by a
88: .Em client
89: and all sessions are managed by a single
90: .Em server .
91: The server and each client are separate processes which communicate through a
92: socket in
93: .Pa /tmp .
1.65 nicm 94: .Pp
1.1 nicm 95: The options are as follows:
96: .Bl -tag -width "XXXXXXXXXXXX"
97: .It Fl 2
98: Force
99: .Nm
100: to assume the terminal supports 256 colours.
101: .It Fl 8
102: Like
103: .Fl 2 ,
1.6 jmc 104: but indicates that the terminal supports 88 colours.
1.91 nicm 105: .It Fl c Ar shell-command
106: Execute
107: .Ar shell-command
108: using the default shell.
109: If necessary, the
110: .Nm
111: server will be started to retrieve the
112: .Ic default-shell
113: option.
1.1 nicm 114: .It Fl f Ar file
115: Specify an alternative configuration file.
116: By default,
117: .Nm
1.26 nicm 118: loads the system configuration file from
119: .Pa /etc/tmux.conf ,
120: if present, then looks for a user configuration file at
1.1 nicm 121: .Pa ~/.tmux.conf .
122: The configuration file is a set of
123: .Nm
124: commands which are executed in sequence when the server is first started.
1.61 nicm 125: .Pp
126: If a command in the configuration file fails,
127: .Nm
128: will report an error and exit without executing further commands.
1.82 nicm 129: .It Fl l
130: Behave as a login shell.
131: This flag currently has no effect and is for compatibility with other shells
132: when using tmux as a login shell.
1.1 nicm 133: .It Fl L Ar socket-name
134: .Nm
135: stores the server socket in a directory under
136: .Pa /tmp ;
137: the default socket is named
138: .Em default .
139: This option allows a different socket name to be specified, allowing several
140: independent
141: .Nm
142: servers to be run.
143: Unlike
144: .Fl S
145: a full path is not necessary: the sockets are all created in the same
146: directory.
1.2 nicm 147: .Pp
148: If the socket is accidentally removed, the
1.6 jmc 149: .Dv SIGUSR1
1.2 nicm 150: signal may be sent to the
151: .Nm
152: server process to recreate it.
1.4 sobrado 153: .It Fl q
1.6 jmc 154: Prevent the server sending various informational messages, for example when
1.4 sobrado 155: window flags are altered.
1.1 nicm 156: .It Fl S Ar socket-path
157: Specify a full alternative path to the server socket.
158: If
159: .Fl S
160: is specified, the default socket directory is not used and any
161: .Fl L
162: flag is ignored.
163: .It Fl u
164: .Nm
1.14 nicm 165: attempts to guess if the terminal is likely to support UTF-8 by checking the
166: first of the
167: .Ev LC_ALL ,
168: .Ev LC_CTYPE
169: and
1.2 nicm 170: .Ev LANG
1.14 nicm 171: environment variables to be set for the string "UTF-8".
1.5 nicm 172: This is not always correct: the
1.2 nicm 173: .Fl u
174: flag explicitly informs
175: .Nm
1.6 jmc 176: that UTF-8 is supported.
1.33 nicm 177: .Pp
178: If the server is started from a client passed
179: .Fl u
180: or where UTF-8 is detected, the
181: .Ic utf8
182: and
183: .Ic status-utf8
184: options are enabled in the global window and session options respectively.
1.1 nicm 185: .It Fl v
186: Request verbose logging.
187: This option may be specified multiple times for increasing verbosity.
188: Log messages will be saved into
189: .Pa tmux-client-PID.log
190: and
191: .Pa tmux-server-PID.log
192: files in the current directory, where
193: .Em PID
1.6 jmc 194: is the PID of the server or client process.
1.1 nicm 195: .It Ar command Op Ar flags
196: This specifies one of a set of commands used to control
197: .Nm ,
1.6 jmc 198: as described in the following sections.
1.59 jmc 199: If no commands are specified, the
1.1 nicm 200: .Ic new-session
201: command is assumed.
1.57 jmc 202: .El
1.64 nicm 203: .Sh KEY BINDINGS
204: .Nm
205: may be controlled from an attached client by using a key combination of a
206: prefix key,
207: .Ql C-b
208: (Ctrl-b) by default, followed by a command key.
209: .Pp
210: Some of the default key bindings are:
211: .Pp
1.67 jmc 212: .Bl -tag -width Ds -offset indent -compact
1.64 nicm 213: .It c
1.65 nicm 214: Create a new window.
1.64 nicm 215: .It d
1.65 nicm 216: Detach the current client.
1.64 nicm 217: .It l
1.65 nicm 218: Move to the previously selected window.
1.64 nicm 219: .It n
1.65 nicm 220: Change to the next window.
1.64 nicm 221: .It p
1.65 nicm 222: Change to the previous window.
223: .It &
224: Kill the current window.
225: .It ,
226: Rename the current window.
1.64 nicm 227: .It \&?
1.65 nicm 228: List all key bindings.
1.64 nicm 229: .El
230: .Pp
231: A complete list may be obtained with the
232: .Ic list-keys
233: command (bound to
234: .Ql \&?
235: by default).
236: Key bindings may be changed with the
237: .Ic bind-key
238: and
239: .Ic unbind-key
240: commands.
1.57 jmc 241: .Sh COMMANDS
242: This section contains a list of the commands supported by
243: .Nm .
244: Most commands accept the optional
245: .Fl t
246: argument with one of
247: .Ar target-client ,
248: .Ar target-session
249: .Ar target-window ,
250: or
251: .Ar target-pane .
252: These specify the client, session, window or pane which a command should affect.
253: .Ar target-client
254: is the name of the
255: .Xr pty 4
256: file to which the client is connected, for example either of
257: .Pa /dev/ttyp1
258: or
259: .Pa ttyp1
260: for the client attached to
261: .Pa /dev/ttyp1 .
262: If no client is specified, the current client is chosen, if possible, or an
263: error is reported.
264: Clients may be listed with the
265: .Ic list-clients
266: command.
1.1 nicm 267: .Pp
1.57 jmc 268: .Ar target-session
269: is either the name of a session (as listed by the
270: .Ic list-sessions
271: command) or the name of a client with the same syntax as
272: .Ar target-client ,
273: in which case the session attached to the client is used.
274: When looking for the session name,
275: .Nm
276: initially searches for an exact match; if none is found, the session names
277: are checked for any for which
278: .Ar target-session
279: is a prefix or for which it matches as an
280: .Xr fnmatch 3
281: pattern.
282: If a single match is found, it is used as the target session; multiple matches
283: produce an error.
284: If a session is omitted, the current session is used if available; if no
1.117 nicm 285: current session is available, the most recently used is chosen.
1.1 nicm 286: .Pp
1.57 jmc 287: .Ar target-window
288: specifies a window in the form
289: .Em session Ns \&: Ns Em window .
290: .Em session
291: follows the same rules as for
292: .Ar target-session ,
293: and
294: .Em window
295: is looked for in order: as a window index, for example mysession:1; as an exact
296: window name, such as mysession:mywindow; then as an
297: .Xr fnmatch 3
298: pattern or the start of a window name, such as mysession:mywin* or
299: mysession:mywin.
300: An empty window name specifies the next unused index if appropriate (for
301: example the
302: .Ic new-window
303: and
304: .Ic link-window
305: commands)
306: otherwise the current window in
307: .Em session
308: is chosen.
309: When the argument does not contain a colon,
310: .Nm
311: first attempts to parse it as window; if that fails, an attempt is made to
312: match a session.
1.1 nicm 313: .Pp
1.57 jmc 314: .Ar target-pane
315: takes a similar form to
316: .Ar target-window
317: but with the optional addition of a period followed by a pane index, for
318: example: mysession:mywindow.1.
319: If the pane index is omitted, the currently active pane in the specified
320: window is used.
321: If neither a colon nor period appears,
1.13 nicm 322: .Nm
1.57 jmc 323: first attempts to use the argument as a pane index; if that fails, it is looked
324: up as for
325: .Ar target-window .
1.15 jmc 326: .Pp
1.57 jmc 327: Multiple commands may be specified together as part of a
328: .Em command sequence .
329: Each command should be separated by spaces and a semicolon;
330: commands are executed sequentially from left to right.
331: A literal semicolon may be included by escaping it with a backslash (for
332: example, when specifying a command sequence to
333: .Ic bind-key ) .
1.13 nicm 334: .Pp
1.57 jmc 335: Examples include:
1.13 nicm 336: .Bd -literal -offset indent
1.57 jmc 337: refresh-client -t/dev/ttyp2
338:
339: rename-session -tfirst newname
340:
341: set-window-option -t:0 monitor-activity on
342:
343: new-window ; split-window -d
1.13 nicm 344: .Ed
1.57 jmc 345: .Sh CLIENTS AND SESSIONS
346: The following commands are available:
347: .Bl -tag -width Ds
348: .It Xo Ic attach-session
349: .Op Fl d
350: .Op Fl t Ar target-session
351: .Xc
352: .D1 (alias: Ic attach )
353: If run from outside
354: .Nm ,
355: create a new client in the current terminal and attach it to
356: .Ar target-session .
357: If used from inside, switch the current client.
358: If
359: .Fl d
360: is specified, any other clients attached to the session are detached.
1.13 nicm 361: .Pp
1.57 jmc 362: If no server is started,
363: .Ic attach-session
364: will attempt to start it; this will fail unless sessions are created in the
365: configuration file.
366: .It Ic detach-client Op Fl t Ar target-client
367: .D1 (alias: Ic detach )
368: Detach the current client if bound to a key, or the specified client with
369: .Fl t .
370: .It Ic has-session Op Fl t Ar target-session
371: .D1 (alias: Ic has )
372: Report an error and exit with 1 if the specified session does not exist.
373: If it does exist, exit with 0.
374: .It Ic kill-server
375: Kill the
1.1 nicm 376: .Nm
1.57 jmc 377: server and clients and destroy all sessions.
378: .It Ic kill-session Op Fl t Ar target-session
379: Destroy the given session, closing any windows linked to it and no other
380: sessions, and detaching all clients attached to it.
381: .It Ic list-clients
382: .D1 (alias: Ic lsc )
383: List all clients attached to the server.
384: .It Ic list-commands
385: .D1 (alias: Ic lscm )
386: List the syntax of all commands supported by
387: .Nm .
388: .It Ic list-sessions
389: .D1 (alias: Ic ls )
390: List all sessions managed by the server.
1.92 nicm 391: .It Xo Ic lock-client
392: .Op Fl t Ar target-client
393: .Xc
394: Lock
395: .Ar target-client ,
396: see the
397: .Ic lock-server
398: command.
399: .It Xo Ic lock-session
400: .Op Fl t Ar target-session
401: .Xc
402: Lock all clients attached to
403: .Ar target-session .
1.57 jmc 404: .It Xo Ic new-session
405: .Op Fl d
406: .Op Fl n Ar window-name
407: .Op Fl s Ar session-name
1.101 nicm 408: .Op Fl t Ar target-session
1.57 jmc 409: .Op Ar command
410: .Xc
411: .D1 (alias: Ic new )
412: Create a new session with name
413: .Ar session-name .
414: The new session is attached to the current terminal unless
415: .Fl d
416: is given.
417: .Ar window-name
1.1 nicm 418: and
1.57 jmc 419: .Ar command
420: are the name of and command to execute in the initial window.
1.68 nicm 421: .Pp
422: If run from a terminal, any
423: .Xr termios 4
424: special characters are saved and used for new windows in the new session.
1.101 nicm 425: .Pp
426: If
427: .Fl t
428: is given, the new session is
429: .Em grouped
430: with
431: .Ar target-session .
432: This means they share the same set of windows - all windows from
433: .Ar target-session
434: are linked to the new session and any subsequent new windows or windows being
435: closed are applied to both sessions.
436: The current and previous window and any session options remain independent and
437: either session may be killed without affecting the other.
438: Giving
439: .Fl n
440: or
441: .Ar command
442: are invalid if
443: .Fl t
444: is used.
1.57 jmc 445: .It Ic refresh-client Op Fl t Ar target-client
446: .D1 (alias: Ic refresh )
447: Refresh the current client if bound to a key, or a single client if one is given
448: with
449: .Fl t .
450: .It Xo Ic rename-session
451: .Op Fl t Ar target-session
452: .Ar new-name
453: .Xc
454: .D1 (alias: Ic rename )
455: Rename the session to
456: .Ar new-name .
1.121 nicm 457: .It Xo Ic show-messages
1.120 nicm 458: .Op Fl t Ar target-client
459: .Xc
460: .D1 (alias: Ic showmsgs )
461: Any messages displayed on the status line are saved in a per-client message
462: log, up to a maximum of the limit set by the
463: .Ar message-limit
464: session option for the session attached to that client.
465: This command displays the log for
466: .Ar target-client .
1.57 jmc 467: .It Ic source-file Ar path
468: .D1 (alias: Ic source )
469: Execute commands from
470: .Ar path .
471: .It Ic start-server
472: .D1 (alias: Ic start )
473: Start the
1.1 nicm 474: .Nm
1.57 jmc 475: server, if not already running, without creating any sessions.
476: .It Xo Ic suspend-client
477: .Op Fl c Ar target-client
478: .Xc
479: .D1 (alias: Ic suspendc )
480: Suspend a client by sending
481: .Dv SIGTSTP
482: (tty stop).
483: .It Xo Ic switch-client
484: .Op Fl c Ar target-client
485: .Op Fl t Ar target-session
486: .Xc
487: .D1 (alias: Ic switchc )
488: Switch the current session for client
489: .Ar target-client
490: to
491: .Ar target-session .
492: .El
493: .Sh WINDOWS AND PANES
1.1 nicm 494: A
495: .Nm
496: window may be in one of several modes.
497: The default permits direct access to the terminal attached to the window.
498: The others are:
499: .Bl -tag -width Ds
500: .It Em output mode
501: This is entered when a command which produces output, such as
502: .Ic list-keys ,
503: is executed from a key binding.
504: .It Em copy mode
505: This permits a section of a window or its history to be copied to a
506: .Em paste buffer
507: for later insertion into another window.
508: This mode is entered with the
509: .Ic copy-mode
510: command, bound to
1.113 nicm 511: .Ql \&[
1.1 nicm 512: by default.
513: .El
514: .Pp
1.6 jmc 515: The keys available depend on whether emacs or vi mode is selected
516: (see the
1.1 nicm 517: .Ic mode-keys
518: option).
519: The following keys are supported as appropriate for the mode:
1.98 nicm 520: .Bl -column "FunctionXXXXXXXXXXXX" "viXXXXXXXXX" "emacs" -offset indent
1.1 nicm 521: .It Sy "Function" Ta Sy "vi" Ta Sy "emacs"
1.27 nicm 522: .It Li "Back to indentation" Ta "^" Ta "M-m"
1.1 nicm 523: .It Li "Clear selection" Ta "Escape" Ta "C-g"
524: .It Li "Copy selection" Ta "Enter" Ta "M-w"
525: .It Li "Cursor down" Ta "j" Ta "Down"
1.70 nicm 526: .It Li "Cursor left" Ta "h" Ta "Left"
527: .It Li "Cursor right" Ta "l" Ta "Right"
1.116 nicm 528: .It Li "Cursor to bottom line" Ta "L" Ta ""
529: .It Li "Cursor to middle line" Ta "M" Ta "M-r"
530: .It Li "Cursor to top line" Ta "H" Ta "M-R"
1.70 nicm 531: .It Li "Cursor up" Ta "k" Ta "Up"
1.71 nicm 532: .It Li "Delete entire line" Ta "d" Ta "C-u"
1.70 nicm 533: .It Li "Delete to end of line" Ta "D" Ta "C-k"
1.1 nicm 534: .It Li "End of line" Ta "$" Ta "C-e"
1.94 nicm 535: .It Li "Goto line" Ta ":" Ta "g"
1.116 nicm 536: .It Li "Half page down" Ta "C-d" Ta "M-Down"
537: .It Li "Half page up" Ta "C-u" Ta "M-Up"
1.1 nicm 538: .It Li "Next page" Ta "C-f" Ta "Page down"
539: .It Li "Next word" Ta "w" Ta "M-f"
1.70 nicm 540: .It Li "Paste buffer" Ta "p" Ta "C-y"
1.116 nicm 541: .It Li "Previous page" Ta "C-b" Ta "Page up"
1.1 nicm 542: .It Li "Previous word" Ta "b" Ta "M-b"
543: .It Li "Quit mode" Ta "q" Ta "Escape"
1.98 nicm 544: .It Li "Scroll down" Ta "C-Down or J" Ta "C-Down"
545: .It Li "Scroll up" Ta "C-Up or K" Ta "C-Up"
1.70 nicm 546: .It Li "Search again" Ta "n" Ta "n"
547: .It Li "Search backward" Ta "?" Ta "C-r"
548: .It Li "Search forward" Ta "/" Ta "C-s"
549: .It Li "Start of line" Ta "0" Ta "C-a"
1.1 nicm 550: .It Li "Start selection" Ta "Space" Ta "C-Space"
1.80 nicm 551: .It Li "Transpose chars" Ta "" Ta "C-t"
1.1 nicm 552: .El
553: .Pp
1.48 nicm 554: These key bindings are defined in a set of named tables:
555: .Em vi-edit
556: and
557: .Em emacs-edit
558: for keys used when line editing at the command prompt;
559: .Em vi-choice
560: and
561: .Em emacs-choice
562: for keys used when choosing from lists (such as produced by the
563: .Ic window-choose
564: command) or in output mode; and
565: .Em vi-copy
566: and
567: .Em emacs-copy
1.97 nicm 568: used in copy mode.
1.48 nicm 569: The tables may be viewed with the
570: .Ic list-keys
1.49 nicm 571: command and keys modified or removed with
572: .Ic bind-key
573: and
574: .Ic unbind-key .
1.48 nicm 575: .Pp
1.2 nicm 576: The paste buffer key pastes the first line from the top paste buffer on the
577: stack.
1.57 jmc 578: .Pp
579: The mode commands are as follows:
580: .Bl -tag -width Ds
581: .It Xo Ic copy-mode
582: .Op Fl u
1.72 nicm 583: .Op Fl t Ar target-pane
1.57 jmc 584: .Xc
585: Enter copy mode.
586: The
587: .Fl u
588: option scrolls one page up.
589: .El
1.18 nicm 590: .Pp
1.1 nicm 591: Each window displayed by
592: .Nm
593: may be split into one or more
594: .Em panes ;
595: each pane takes up a certain area of the display and is a separate terminal.
596: A window may be split into panes using the
597: .Ic split-window
598: command.
1.38 nicm 599: Windows may be split horizontally (with the
600: .Fl h
601: flag) or vertically.
602: Panes may be resized with the
603: .Ic resize-pane
1.1 nicm 604: command (bound to
1.38 nicm 605: .Ql C-up ,
606: .Ql C-down
607: .Ql C-left
608: and
609: .Ql C-right
1.1 nicm 610: by default), the current pane may be changed with the
611: .Ic up-pane
612: and
613: .Ic down-pane
614: commands and the
615: .Ic rotate-window
616: and
617: .Ic swap-pane
1.38 nicm 618: commands may be used to swap panes without changing their position.
619: Panes are numbered beginning from zero in the order they are created.
620: .Pp
621: A number of preset
622: .Em layouts
623: are available.
624: These may be selected with the
625: .Ic select-layout
626: command or cycled with
627: .Ic next-layout
628: (bound to
629: .Ql C-space
630: by default); once a layout is chosen, panes within it may be moved and resized as normal.
1.1 nicm 631: .Pp
632: The following layouts are supported:
633: .Bl -tag -width Ds
634: .It Ic even-horizontal
635: Panes are spread out evenly from left to right across the window.
636: .It Ic even-vertical
637: Panes are spread evenly from top to bottom.
1.2 nicm 638: .It Ic main-horizontal
639: A large (main) pane is shown at the top of the window and the remaining panes are
1.6 jmc 640: spread from left to right in the leftover space at the bottom.
1.2 nicm 641: Use the
642: .Em main-pane-height
643: window option to specify the height of the top pane.
1.1 nicm 644: .It Ic main-vertical
1.2 nicm 645: Similar to
646: .Ic main-horizontal
647: but the large pane is placed on the left and the others spread from top to
648: bottom along the right.
649: See the
650: .Em main-pane-width
651: window option.
1.1 nicm 652: .El
1.8 nicm 653: .Pp
1.57 jmc 654: Commands related to windows and panes are as follows:
655: .Bl -tag -width Ds
656: .It Xo Ic break-pane
657: .Op Fl d
658: .Op Fl t Ar target-pane
659: .Xc
660: .D1 (alias: Ic breakp )
661: Break
662: .Ar target-pane
663: off from its containing window to make it the only pane in a new window.
664: If
665: .Fl d
666: is given, the new window does not become the current window.
1.76 nicm 667: .It Xo
668: .Ic choose-client
669: .Op Fl t Ar target-window
670: .Op Ar template
671: .Xc
672: Put a window into client choice mode, allowing a client to be selected
673: interactively from a list.
674: After a client is chosen,
675: .Ql %%
676: is replaced by the client
677: .Xr pty 4
678: path in
679: .Ar template
680: and the result executed as a command.
681: If
682: .Ar template
683: is not given, "detach-client -t '%%'" is used.
1.57 jmc 684: This command works only from inside
685: .Nm .
1.76 nicm 686: .It Xo
687: .Ic choose-session
688: .Op Fl t Ar target-window
689: .Op Ar template
690: .Xc
691: Put a window into session choice mode, where a session may be selected
692: interactively from a list.
693: When one is chosen,
694: .Ql %%
695: is replaced by the session name in
696: .Ar template
697: and the result executed as a command.
698: If
699: .Ar template
700: is not given, "switch-client -t '%%'" is used.
701: This command works only from inside
702: .Nm .
703: .It Xo
704: .Ic choose-window
705: .Op Fl t Ar target-window
706: .Op Ar template
707: .Xc
708: Put a window into window choice mode, where a window may be chosen
709: interactively from a list.
710: After a window is selected,
711: .Ql %%
712: is replaced by the session name and window index in
713: .Ar template
714: and the result executed as a command.
715: If
716: .Ar template
717: is not given, "select-window -t '%%'" is used.
1.57 jmc 718: This command works only from inside
719: .Nm .
1.78 nicm 720: .It Ic display-panes Op Fl t Ar target-client
721: .D1 (alias: Ic displayp)
722: Display a visible indicator of each pane shown by
723: .Ar target-client .
724: See the
725: .Ic display-panes-time
726: and
727: .Ic display-panes-colour
728: session options.
1.84 nicm 729: While the indicator is on screen, a pane may be selected with the
730: .Ql 0
731: to
732: .Ql 9
733: keys.
1.57 jmc 734: .It Ic down-pane Op Fl t Ar target-pane
735: .D1 (alias: Ic downp )
1.111 nicm 736: Change the active pane to the next pane (higher index).
1.57 jmc 737: .It Xo Ic find-window
738: .Op Fl t Ar target-window
739: .Ar match-string
740: .Xc
741: .D1 (alias: Ic findw )
742: Search for the
743: .Xr fnmatch 3
744: pattern
745: .Ar match-string
746: in window names, titles, and visible content (but not history).
747: If only one window is matched, it'll be automatically selected, otherwise a
748: choice list is shown.
749: This command only works from inside
1.1 nicm 750: .Nm .
1.112 nicm 751: .It Xo Ic kill-pane
752: .Op Fl a
753: .Op Fl t Ar target-pane
754: .Xc
1.57 jmc 755: .D1 (alias: Ic killp )
756: Destroy the given pane.
757: If no panes remain in the containing window, it is also destroyed.
1.112 nicm 758: The
759: .Fl a
760: option kills all but the pane given with
761: .Fl t .
1.57 jmc 762: .It Ic kill-window Op Fl t Ar target-window
763: .D1 (alias: Ic killw )
764: Kill the current window or the window at
765: .Ar target-window ,
1.1 nicm 766: removing it from any sessions to which it is linked.
1.56 jmc 767: .It Ic last-window Op Fl t Ar target-session
1.1 nicm 768: .D1 (alias: Ic last )
769: Select the last (previously selected) window.
770: If no
771: .Ar target-session
772: is specified, select the last window of the current session.
773: .It Xo Ic link-window
774: .Op Fl dk
775: .Op Fl s Ar src-window
776: .Op Fl t Ar dst-window
777: .Xc
778: .D1 (alias: Ic linkw )
779: Link the window at
780: .Ar src-window
781: to the specified
782: .Ar dst-window .
783: If
784: .Ar dst-window
785: is specified and no such window exists, the
786: .Ar src-window
787: is linked there.
788: If
789: .Fl k
790: is given and
791: .Ar dst-window
792: exists, it is killed, otherwise an error is generated.
793: If
794: .Fl d
795: is given, the newly linked window is not selected.
1.104 nicm 796: .It Ic list-panes Op Fl t Ar target-window
797: .D1 (alias: Ic lsp )
798: List the panes in the current window or in
799: .Ar target-window .
1.56 jmc 800: .It Ic list-windows Op Fl t Ar target-session
1.1 nicm 801: .D1 (alias: Ic lsw )
802: List windows in the current session or in
803: .Ar target-session .
804: .It Xo Ic move-window
805: .Op Fl d
806: .Op Fl s Ar src-window
807: .Op Fl t Ar dst-window
808: .Xc
809: .D1 (alias: Ic movew )
810: This is similar to
811: .Ic link-window ,
812: except the window at
813: .Ar src-window
814: is moved to
815: .Ar dst-window .
816: .It Xo Ic new-window
1.28 nicm 817: .Op Fl dk
1.1 nicm 818: .Op Fl n Ar window-name
819: .Op Fl t Ar target-window
820: .Op Ar command
821: .Xc
822: .D1 (alias: Ic neww )
823: Create a new window.
824: If
825: .Fl d
826: is given, the session does not make the new window the current window.
827: .Ar target-window
1.28 nicm 828: represents the window to be created; if the target already exists an error is
829: shown, unless the
830: .Fl k
831: flag is used, in which case it is destroyed.
1.1 nicm 832: .Ar command
833: is the command to execute.
834: If
835: .Ar command
836: is not specified, the default command is used.
837: .Pp
838: The
839: .Ev TERM
840: environment variable must be set to
841: .Dq screen
842: for all programs running
843: .Em inside
844: .Nm .
845: New windows will automatically have
846: .Dq TERM=screen
847: added to their environment, but care must be taken not to reset this in shell
848: start-up files.
1.56 jmc 849: .It Ic next-layout Op Fl t Ar target-window
1.1 nicm 850: .D1 (alias: Ic nextl )
851: Move a window to the next layout and rearrange the panes to fit.
852: .It Xo Ic next-window
1.9 nicm 853: .Op Fl a
1.1 nicm 854: .Op Fl t Ar target-session
855: .Xc
856: .D1 (alias: Ic next )
857: Move to the next window in the session.
1.9 nicm 858: If
1.12 jmc 859: .Fl a
1.9 nicm 860: is used, move to the next window with a bell, activity or content alert.
1.107 nicm 861: .It Xo Ic pipe-pane
862: .Op Fl o
863: .Op Fl t Ar target-pane
864: .Op Ar command
865: .Xc
866: .D1 (alias: Ic pipep )
867: Pipe any output sent by the program in
868: .Ar target-pane
869: to a shell command.
870: A pane may only be piped to one command at a time, any existing pipe is
871: closed before
872: .Ar command
873: is executed.
874: If no
875: .Ar command
876: is given, the current pipe (if any) is closed.
877: .Pp
878: The
879: .Fl o
880: option only opens a new pipe if no previous pipe exists, allowing a pipe to
881: be toggled with a single key, for example:
882: .Bd -literal -offset indent
883: bind-key C-p pipe-pane -o 'cat >>~/output'
884: .Ed
1.1 nicm 885: .It Xo Ic previous-window
1.9 nicm 886: .Op Fl a
1.1 nicm 887: .Op Fl t Ar target-session
888: .Xc
889: .D1 (alias: Ic prev )
890: Move to the previous window in the session.
1.9 nicm 891: With
892: .Fl a ,
893: move to the previous window with a bell, activity or content alert.
1.1 nicm 894: .It Xo Ic rename-window
895: .Op Fl t Ar target-window
896: .Ar new-name
897: .Xc
898: .D1 (alias: Ic renamew )
899: Rename the current window, or the window at
900: .Ar target-window
901: if specified, to
902: .Ar new-name .
903: .It Xo Ic resize-pane
1.39 jmc 904: .Op Fl DLRU
1.52 nicm 905: .Op Fl t Ar target-pane
1.1 nicm 906: .Op Ar adjustment
907: .Xc
908: .D1 (alias: Ic resizep )
1.57 jmc 909: Resize a pane, upward with
910: .Fl U
911: (the default), downward with
912: .Fl D ,
913: to the left with
914: .Fl L
915: and to the right with
916: .Fl R .
917: The
918: .Ar adjustment
919: is given in lines or cells (the default is 1).
920: .It Xo Ic respawn-window
921: .Op Fl k
922: .Op Fl t Ar target-window
923: .Op Ar command
924: .Xc
925: .D1 (alias: Ic respawnw )
926: Reactive a window in which the command has exited (see the
927: .Ic remain-on-exit
928: window option).
929: If
930: .Ar command
931: is not given, the command used when the window was created is executed.
932: The window must be already inactive, unless
933: .Fl k
934: is given, in which case any existing command is killed.
935: .It Xo Ic rotate-window
936: .Op Fl DU
937: .Op Fl t Ar target-window
938: .Xc
939: .D1 (alias: Ic rotatew )
940: Rotate the positions of the panes within a window, either upward (numerically
941: lower) with
942: .Fl U
943: or downward (numerically higher).
944: .It Xo Ic select-layout
945: .Op Fl t Ar target-window
946: .Op Ar layout-name
947: .Xc
948: .D1 (alias: selectl )
949: Choose a specific layout for a window.
950: If
951: .Ar layout-name
952: is not given, the last layout used (if any) is reapplied.
953: .It Ic select-pane Op Fl t Ar target-pane
954: .D1 (alias: Ic selectp )
955: Make pane
956: .Ar target-pane
957: the active pane in window
958: .Ar target-window .
959: .It Ic select-window Op Fl t Ar target-window
960: .D1 (alias: Ic selectw )
961: Select the window at
962: .Ar target-window .
963: .It Xo Ic split-window
964: .Op Fl dhv
965: .Oo Fl l
966: .Ar size |
967: .Fl p Ar percentage Oc
968: .Op Fl t Ar target-window
969: .Op Ar command
970: .Xc
971: .D1 (alias: splitw )
972: Creates a new pane by splitting the active pane:
973: .Fl h
974: does a horizontal split and
975: .Fl v
976: a vertical split; if neither is specified,
977: .Fl v
978: is assumed.
979: The
980: .Fl l
981: and
982: .Fl p
983: options specify the size of the new window in lines (for vertical split) or in
984: cells (for horizontal split), or as a percentage, respectively.
985: All other options have the same meaning as in the
986: .Ic new-window
987: command.
988: .It Xo Ic swap-pane
989: .Op Fl dDU
990: .Op Fl s Ar src-pane
991: .Op Fl t Ar dst-pane
992: .Xc
993: .D1 (alias: Ic swapp )
994: Swap two panes.
995: If
996: .Fl U
997: is used and no source pane is specified with
998: .Fl s ,
999: .Ar dst-pane
1000: is swapped with the previous pane (before it numerically);
1001: .Fl D
1002: swaps with the next pane (after it numerically).
1003: .It Xo Ic swap-window
1004: .Op Fl d
1005: .Op Fl s Ar src-window
1006: .Op Fl t Ar dst-window
1007: .Xc
1008: .D1 (alias: Ic swapw )
1009: This is similar to
1010: .Ic link-window ,
1011: except the source and destination windows are swapped.
1012: It is an error if no window exists at
1013: .Ar src-window .
1014: .It Xo Ic unlink-window
1.1 nicm 1015: .Op Fl k
1016: .Op Fl t Ar target-window
1017: .Xc
1.57 jmc 1018: .D1 (alias: Ic unlinkw )
1019: Unlink
1020: .Ar target-window .
1021: Unless
1022: .Fl k
1023: is given, a window may be unlinked only if it is linked to multiple sessions -
1024: windows may not be linked to no sessions;
1025: if
1.1 nicm 1026: .Fl k
1.57 jmc 1027: is specified and the window is linked to only one session, it is unlinked and
1028: destroyed.
1029: .It Ic up-pane Op Fl t Ar target-pane
1030: .D1 (alias: Ic upp )
1.111 nicm 1031: Change the active pane to the previous pane (lower index).
1.57 jmc 1032: .El
1033: .Sh KEY BINDINGS
1.93 nicm 1034: .Nm
1035: allows a command to be bound to most keys, with or without a prefix key.
1036: When specifying keys, most represent themselves (for example
1037: .Ql A
1038: to
1.95 jmc 1039: .Ql Z ) .
1.93 nicm 1040: Ctrl keys may be prefixed with
1041: .Ql C-
1042: or
1.95 jmc 1043: .Ql ^ ,
1044: and Alt (meta) with
1.93 nicm 1045: .Ql M- .
1046: In addition, the following special key names are accepted:
1.126 ! nicm 1047: .Em Up ,
! 1048: .Em Down ,
! 1049: .Em Left ,
! 1050: .Em Right ,
1.93 nicm 1051: .Em BSpace ,
1052: .Em BTab ,
1053: .Em DC
1054: (Delete),
1055: .Em End ,
1056: .Em Enter ,
1057: .Em Escape ,
1058: .Em F1
1059: to
1060: .Em F20 ,
1061: .Em Home ,
1062: .Em IC
1063: (Insert),
1064: .Em NPage
1065: (Page Up),
1066: .Em PPage
1067: (Page Down),
1068: .Em Space ,
1069: and
1070: .Em Tab .
1071: Note that to bind the
1072: .Ql \&"
1073: or
1074: .Ql '
1075: keys, quotation marks are necessary, for example:
1076: .Bd -literal -offset indent
1077: bind-key '"' split-window
1078: bind-key "'" select-prompt
1079: .Ed
1080: .Pp
1.57 jmc 1081: Commands related to key bindings are as follows:
1082: .Bl -tag -width Ds
1083: .It Xo Ic bind-key
1084: .Op Fl cnr
1085: .Op Fl t Ar key-table
1086: .Ar key Ar command Op Ar arguments
1.1 nicm 1087: .Xc
1.57 jmc 1088: .D1 (alias: Ic bind )
1089: Bind key
1090: .Ar key
1091: to
1092: .Ar command .
1093: By default (without
1094: .Fl t )
1095: the primary key bindings are modified (those normally activated with the prefix
1096: key); in this case, if
1097: .Fl n
1098: is specified, it is not necessary to use the prefix key,
1099: .Ar command
1100: is bound to
1101: .Ar key
1102: alone.
1.1 nicm 1103: The
1.57 jmc 1104: .Fl r
1105: flag indicates this key may repeat, see the
1106: .Ic repeat-time
1107: option.
1108: .Pp
1109: If
1110: .Fl t
1111: is present,
1112: .Ar key
1113: is bound in
1114: .Ar key-table :
1115: the binding for command mode with
1116: .Fl c
1117: or for normal mode without.
1118: To view the default bindings and possible commands, see the
1119: .Ic list-keys
1120: command.
1121: .It Ic list-keys Op Fl t Ar key-table
1122: .D1 (alias: Ic lsk )
1123: List all key bindings.
1124: Without
1125: .Fl t
1126: the primary key bindings - those executed when preceded by the prefix key -
1127: are printed.
1128: Keys bound without the prefix key (see
1129: .Ic bind-key
1130: .Fl n )
1.119 nicm 1131: are marked with
1132: .Ql (no prefix) .
1.57 jmc 1133: .Pp
1134: With
1135: .Fl t ,
1136: the key bindings in
1137: .Ar key-table
1138: are listed; this may be one of:
1139: .Em vi-edit ,
1140: .Em emacs-edit ,
1141: .Em vi-choice ,
1142: .Em emacs-choice ,
1143: .Em vi-copy
1144: or
1145: .Em emacs-copy .
1146: .It Xo Ic send-keys
1.72 nicm 1147: .Op Fl t Ar target-pane
1.57 jmc 1148: .Ar key Ar ...
1.1 nicm 1149: .Xc
1.57 jmc 1150: .D1 (alias: Ic send )
1151: Send a key or keys to a window.
1152: Each argument
1153: .Ar key
1154: is the name of the key (such as
1155: .Ql C-a
1156: or
1157: .Ql npage
1158: ) to send; if the string is not recognised as a key, it is sent as a series of
1159: characters.
1160: All arguments are sent sequentially from first to last.
1.72 nicm 1161: .It Ic send-prefix Op Fl t Ar target-pane
1.57 jmc 1162: Send the prefix key to a window as if it was pressed.
1.89 nicm 1163: If multiple prefix keys are configured, only the first is sent.
1.57 jmc 1164: .It Xo Ic unbind-key
1165: .Op Fl cn
1166: .Op Fl t Ar key-table
1167: .Ar key
1.2 nicm 1168: .Xc
1.57 jmc 1169: .D1 (alias: Ic unbind )
1170: Unbind the command bound to
1171: .Ar key .
1172: Without
1173: .Fl t
1174: the primary key bindings are modified; in this case, if
1175: .Fl n
1176: is specified, the command bound to
1177: .Ar key
1178: without a prefix (if any) is removed.
1179: .Pp
1.47 nicm 1180: If
1.57 jmc 1181: .Fl t
1182: is present,
1183: .Ar key
1184: in
1185: .Ar key-table
1186: is unbound: the binding for command mode with
1187: .Fl c
1188: or for normal mode without.
1189: .El
1190: .Sh OPTIONS
1191: The appearance and behaviour of
1192: .Nm
1193: may be modified by changing the value of various options.
1194: There are two types of option:
1195: .Em session options
1196: and
1197: .Em window options .
1198: .Pp
1199: Each individual session may have a set of session options, and there is a
1200: separate set of global session options.
1201: Sessions which do not have a particular option configured inherit the value
1202: from the global session options.
1203: Session options are set or unset with the
1204: .Ic set-option
1205: command and may be listed with the
1206: .Ic show-options
1207: command.
1208: The available session options are listed under the
1209: .Ic set-option
1210: command.
1211: .Pp
1212: Similarly, a set of window options is attached to each window, and there is
1213: a set of global window options from which any unset options are inherited.
1214: Window options are altered with the
1215: .Ic set-window-option
1216: command and can be listed with the
1217: .Ic show-window-options
1218: command.
1219: All window options are documented with the
1220: .Ic set-window-option
1221: command.
1222: .Pp
1223: Commands which set options are as follows:
1224: .Bl -tag -width Ds
1.1 nicm 1225: .It Xo Ic set-option
1.58 nicm 1226: .Op Fl agu
1.1 nicm 1227: .Op Fl t Ar target-session
1228: .Ar option Ar value
1229: .Xc
1230: .D1 (alias: Ic set )
1.18 nicm 1231: Set a session option.
1.58 nicm 1232: With
1233: .Fl a ,
1234: and if the option expects a string,
1235: .Ar value
1236: is appended to the existing setting.
1.1 nicm 1237: If
1238: .Fl g
1.18 nicm 1239: is specified, the global session option is set.
1.1 nicm 1240: The
1241: .Fl u
1242: flag unsets an option, so a session inherits the option from the global
1243: options - it is not possible to unset a global option.
1244: .Pp
1.18 nicm 1245: Available session options are:
1.1 nicm 1246: .Bl -tag -width Ds
1.69 nicm 1247: .It Ic base-index Ar index
1248: Set the base index from which an unused index should be searched when a new
1249: window is created.
1250: The default is zero.
1.1 nicm 1251: .It Xo Ic bell-action
1.56 jmc 1252: .Op Ic any | none | current
1.1 nicm 1253: .Xc
1254: Set action on window bell.
1255: .Ic any
1256: means a bell in any window linked to a session causes a bell in the current
1257: window of that session,
1258: .Ic none
1259: means all bells are ignored and
1260: .Ic current
1261: means only bell in windows other than the current window are ignored.
1262: .It Ic buffer-limit Ar number
1263: Set the number of buffers kept for each session; as new buffers are added to
1264: the top of the stack, old ones are removed from the bottom if necessary to
1265: maintain this maximum length.
1266: .It Ic default-command Ar command
1267: Set the command used for new windows (if not specified when the window is
1268: created) to
1.79 nicm 1269: .Ar command ,
1270: which may be any
1271: .Xr sh 1
1272: command.
1.19 nicm 1273: The default is an empty string, which instructs
1274: .Nm
1.79 nicm 1275: to create a login shell using the value of the
1276: .Ic default-shell
1277: option.
1278: .It Ic default-shell Ar path
1279: Specify the default shell.
1280: This is used as the login shell for new windows when the
1281: .Ic default-command
1282: option is set to empty, and must be the full path of the executable.
1283: When started
1284: .Nm
1285: tries to set a default value from the first suitable of the
1.19 nicm 1286: .Ev SHELL
1.79 nicm 1287: environment variable, the shell returned by
1288: .Xr getpwuid 3 ,
1289: or
1290: .Pa /bin/sh .
1291: This option should be configured when
1292: .Nm
1293: is used as a login shell.
1.1 nicm 1294: .It Ic default-path Ar path
1295: Set the default working directory for processes created from keys, or
1296: interactively from the prompt.
1297: The default is the current working directory when the server is started.
1.22 nicm 1298: .It Ic default-terminal Ar terminal
1299: Set the default terminal for new windows created in this session - the
1300: default value of the
1301: .Ev TERM
1302: environment variable.
1303: For
1304: .Nm
1305: to work correctly, this
1306: .Em must
1307: be set to
1308: .Ql screen
1309: or a derivative of it.
1.78 nicm 1310: .It Ic display-panes-colour Ar colour
1311: Set the colour used for the
1312: .Ic display-panes
1313: command.
1314: .It Ic display-panes-time Ar time
1315: Set the time in milliseconds for which the indicators shown by the
1316: .Ic display-panes
1317: command appear.
1.21 nicm 1318: .It Ic display-time Ar time
1.78 nicm 1319: Set the amount of time for which status line messages and other on-screen
1320: indicators are displayed.
1.21 nicm 1321: .Ar time
1322: is in milliseconds.
1.1 nicm 1323: .It Ic history-limit Ar lines
1324: Set the maximum number of lines held in window history.
1325: This setting applies only to new windows - existing window histories are not
1326: resized and retain the limit at the point they were created.
1327: .It Ic lock-after-time Ar number
1.100 nicm 1328: Lock the session (like the
1329: .Ic lock-session
1.90 nicm 1330: command) after
1.1 nicm 1331: .Ar number
1.100 nicm 1332: seconds of inactivity, or the entire server (all sessions) if the
1333: .Ic lock-server
1334: option is set.
1335: The default is not to lock (set to 0).
1.90 nicm 1336: .It Ic lock-command Ar command
1337: Command to run when locking each client.
1338: The default is to run
1339: .Xr lock 1
1340: with
1341: .Fl np .
1.100 nicm 1342: .It Xo Ic lock-server
1343: .Op Ic on | off
1344: .Xc
1345: If this option is
1.102 nicm 1346: .Ic on
1.100 nicm 1347: (the default),
1348: instead of each session locking individually as each has been
1349: idle for
1.108 jmc 1350: .Ic lock-after-time ,
1351: the entire server will lock after
1.100 nicm 1352: .Em all
1353: sessions would have locked.
1354: This has no effect as a session option; it must be set as a global option.
1.1 nicm 1355: .It Ic message-attr Ar attributes
1356: Set status line message attributes, where
1357: .Ar attributes
1358: is either
1359: .Ic default
1360: or a comma-delimited list of one or more of:
1361: .Ic bright
1362: (or
1363: .Ic bold ) ,
1364: .Ic dim ,
1365: .Ic underscore ,
1366: .Ic blink ,
1367: .Ic reverse ,
1368: .Ic hidden ,
1369: or
1370: .Ic italics .
1371: .It Ic message-bg Ar colour
1372: Set status line message background colour, where
1373: .Ar colour
1374: is one of:
1375: .Ic black ,
1376: .Ic red ,
1377: .Ic green ,
1378: .Ic yellow ,
1379: .Ic blue ,
1380: .Ic magenta ,
1381: .Ic cyan ,
1.85 nicm 1382: .Ic white ,
1383: .Ic colour0
1384: to
1385: .Ic colour255
1386: from the 256-colour palette, or
1.1 nicm 1387: .Ic default .
1388: .It Ic message-fg Ar colour
1389: Set status line message foreground colour.
1.120 nicm 1390: .It Ic message-limit Ar number
1391: Set the number of error or information messages to save in the message log for
1392: each client.
1393: The default is 20.
1.102 nicm 1394: .It Xo Ic mouse-select-pane
1395: .Op Ic on | off
1396: .Xc
1397: If on,
1398: .Nm
1399: captures the mouse and when a window is split into multiple panes the mouse may
1400: be used to select the current pane.
1401: The mouse click is also passed through to the application as normal.
1.89 nicm 1402: .It Ic prefix Ar keys
1403: Set the keys accepted as a prefix key.
1404: .Ar keys
1405: is a comma-separated list of key names, each of which individually behave as
1406: the prefix key.
1.21 nicm 1407: .It Ic repeat-time Ar time
1.1 nicm 1408: Allow multiple commands to be entered without pressing the prefix-key again
1409: in the specified
1.21 nicm 1410: .Ar time
1.1 nicm 1411: milliseconds (the default is 500).
1412: Whether a key repeats may be set when it is bound using the
1413: .Fl r
1414: flag to
1415: .Ic bind-key .
1.52 nicm 1416: Repeat is enabled for the default keys bound to the
1417: .Ic resize-pane
1418: command.
1.1 nicm 1419: .It Xo Ic set-remain-on-exit
1.56 jmc 1420: .Op Ic on | off
1.1 nicm 1421: .Xc
1422: Set the
1423: .Ic remain-on-exit
1424: window option for any windows first created in this session.
1425: .It Xo Ic set-titles
1.56 jmc 1426: .Op Ic on | off
1.1 nicm 1427: .Xc
1.77 stsp 1428: Attempt to set the window title using the \ee]2;...\e007 xterm code if
1.1 nicm 1429: the terminal appears to be an xterm.
1.11 nicm 1430: This option is off by default.
1.6 jmc 1431: Note that elinks
1.1 nicm 1432: will only attempt to set the window title if the STY environment
1433: variable is set.
1.86 nicm 1434: .It Ic set-titles-string Ar string
1435: String used to set the window title if
1436: .Ic set-titles
1437: is on.
1438: Character sequences are replaced as for the
1439: .Ic status-left
1440: option.
1.1 nicm 1441: .It Xo Ic status
1.56 jmc 1442: .Op Ic on | off
1.1 nicm 1443: .Xc
1444: Show or hide the status line.
1445: .It Ic status-attr Ar attributes
1446: Set status line attributes.
1447: .It Ic status-bg Ar colour
1448: Set status line background colour.
1449: .It Ic status-fg Ar colour
1450: Set status line foreground colour.
1451: .It Ic status-interval Ar interval
1452: Update the status bar every
1453: .Ar interval
1454: seconds.
1455: By default, updates will occur every 15 seconds.
1456: A setting of zero disables redrawing at interval.
1.41 nicm 1457: .It Xo Ic status-justify
1.56 jmc 1458: .Op Ic left | centre | right
1.41 nicm 1459: .Xc
1460: Set the position of the window list component of the status line: left, centre
1461: or right justified.
1.1 nicm 1462: .It Xo Ic status-keys
1.56 jmc 1463: .Op Ic vi | emacs
1.1 nicm 1464: .Xc
1.6 jmc 1465: Use vi or emacs-style
1.1 nicm 1466: key bindings in the status line, for example at the command prompt.
1467: Defaults to emacs.
1468: .It Ic status-left Ar string
1469: Display
1470: .Ar string
1471: to the left of the status bar.
1472: .Ar string
1473: will be passed through
1474: .Xr strftime 3
1475: before being used.
1476: By default, the session name is shown.
1477: .Ar string
1.83 nicm 1478: may contain any of the following special character sequences:
1.1 nicm 1479: .Bl -column "Character pair" "Replaced with" -offset indent
1480: .It Sy "Character pair" Ta Sy "Replaced with"
1481: .It Li "#(command)" Ta "First line of command's output"
1.83 nicm 1482: .It Li "#[attributes]" Ta "Colour or attribute change"
1.1 nicm 1483: .It Li "#H" Ta "Hostname of local host"
1.125 nicm 1484: .It Li "#F" Ta "Current window flag"
1.35 nicm 1485: .It Li "#I" Ta "Current window index"
1486: .It Li "#P" Ta "Current pane index"
1.1 nicm 1487: .It Li "#S" Ta "Session name"
1488: .It Li "#T" Ta "Current window title"
1.35 nicm 1489: .It Li "#W" Ta "Current window name"
1.1 nicm 1490: .It Li "##" Ta "A literal" Ql #
1491: .El
1.83 nicm 1492: .Pp
1493: The #(command) form executes
1494: .Ql command
1495: as a shell command and inserts the first line of its output.
1.103 nicm 1496: Note that shell commands are only executed once at the interval specified by
1497: the
1498: .Ic status-interval
1499: option: if the status line is redrawn in the meantime, the previous result is
1500: used.
1.109 nicm 1501: .Pp
1.83 nicm 1502: #[attributes] allows a comma-separated list of attributes to be specified,
1503: these may be
1504: .Ql fg=colour
1505: to set the foreground colour,
1506: .Ql bg=colour
1.109 nicm 1507: to set the background colour, the name of one of the attributes (listed under the
1.83 nicm 1508: .Ic message-attr
1.109 nicm 1509: option) to turn an attribute on, or an attribute prefixed with
1510: .Ql no
1511: to turn one off, for example
1512: .Ic nobright .
1.83 nicm 1513: Examples are:
1514: .Bd -literal -offset indent
1515: #(sysctl vm.loadavg)
1516: #[fg=yellow,bold]#(apm -l)%%#[default] [#S]
1517: .Ed
1.1 nicm 1518: .Pp
1.109 nicm 1519: Where appropriate, special character sequences may be prefixed with a number to
1520: specify the maximum length, for example
1.1 nicm 1521: .Ql #24T .
1.10 nicm 1522: .Pp
1.12 jmc 1523: By default, UTF-8 in
1.10 nicm 1524: .Ar string
1525: is not interpreted, to enable UTF-8, use the
1526: .Ic status-utf8
1527: option.
1.62 nicm 1528: .It Ic status-left-attr Ar attributes
1.66 jmc 1529: Set the attribute of the left part of the status line.
1.62 nicm 1530: .It Ic status-left-fg Ar colour
1531: Set the foreground colour of the left part of the status line.
1532: .It Ic status-left-bg Ar colour
1533: Set the background colour of the left part of the status line.
1.1 nicm 1534: .It Ic status-left-length Ar length
1535: Set the maximum
1536: .Ar length
1537: of the left component of the status bar.
1538: The default is 10.
1539: .It Ic status-right Ar string
1540: Display
1541: .Ar string
1542: to the right of the status bar.
1543: By default, the date and time will be shown.
1544: As with
1545: .Ic status-left ,
1546: .Ar string
1547: will be passed to
1.10 nicm 1548: .Xr strftime 3 ,
1549: character pairs are replaced, and UTF-8 is dependent on the
1550: .Ic status-utf8
1551: option.
1.62 nicm 1552: .It Ic status-right-attr Ar attributes
1.66 jmc 1553: Set the attribute of the right part of the status line.
1.62 nicm 1554: .It Ic status-right-fg Ar colour
1555: Set the foreground colour of the right part of the status line.
1556: .It Ic status-right-bg Ar colour
1557: Set the background colour of the right part of the status line.
1.1 nicm 1558: .It Ic status-right-length Ar length
1559: Set the maximum
1560: .Ar length
1561: of the right component of the status bar.
1562: The default is 40.
1.10 nicm 1563: .Pp
1564: .It Xo Ic status-utf8
1.56 jmc 1565: .Op Ic on | off
1.10 nicm 1566: .Xc
1567: Instruct
1568: .Nm
1569: to treat top-bit-set characters in the
1570: .Ic status-left
1571: and
1572: .Ic status-right
1573: strings as UTF-8; notably, this is important for wide characters.
1574: This option defaults to off.
1.55 jmc 1575: .It Ic terminal-overrides Ar string
1.54 nicm 1576: Contains a list of entries which override terminal descriptions read using
1577: .Xr terminfo 5 .
1578: .Ar string
1579: is a comma-separated list of items each a colon-separated string made up of a
1580: terminal type pattern (matched using
1581: .Xr fnmatch 3 )
1582: and a set of
1583: .Em name=value
1584: entries.
1585: .Pp
1586: For example, to set the
1587: .Ql clear
1588: .Xr terminfo 5
1589: entry to
1590: .Ql \ee[H\ee[2J
1591: for all terminal types and the
1592: .Ql dch1
1593: entry to
1594: .Ql \ee[P
1.55 jmc 1595: for the
1.54 nicm 1596: .Ql rxvt
1597: terminal type, the option could be set to the string:
1598: .Bd -literal -offset indent
1599: "*:clear=\ee[H\ee[2J,rxvt:dch1=\ee[P"
1600: .Ed
1601: .Pp
1602: The terminal entry value is passed through
1603: .Xr strunvis 3
1604: before interpretation.
1605: The default value forcibly corrects the
1606: .Ql colors
1607: entry for terminals which support 88 or 256 colours:
1608: .Bd -literal -offset indent
1609: "*88col*:colors=88,*256col*:colors=256"
1610: .Ed
1.63 nicm 1611: .It Ic update-environment Ar variables
1612: Set a space-separated string containing a list of environment variables to be
1613: copied into the session environment when a new session is created or an
1614: existing session is attached.
1615: Any variables that do not exist in the source environment are set to be
1616: removed from the session environment (as if
1617: .Fl r
1618: was given to the
1619: .Ic set-environment
1620: command).
1621: The default is
1.75 nicm 1622: "DISPLAY WINDOWID SSH_ASKPASS SSH_AUTH_SOCK SSH_AGENT_PID SSH_CONNECTION".
1.37 nicm 1623: .It Xo Ic visual-activity
1.56 jmc 1624: .Op Ic on | off
1.37 nicm 1625: .Xc
1626: If on, display a status line message when activity occurs in a window
1.39 jmc 1627: for which the
1.37 nicm 1628: .Ic monitor-activity
1629: window option is enabled.
1630: .It Xo Ic visual-bell
1.56 jmc 1631: .Op Ic on | off
1.37 nicm 1632: .Xc
1633: If this option is on, a message is shown on a bell instead of it being passed
1634: through to the terminal (which normally makes a sound).
1635: Also see the
1636: .Ic bell-action
1637: option.
1638: .It Xo Ic visual-content
1.56 jmc 1639: .Op Ic on | off
1.37 nicm 1640: .Xc
1641: Like
1642: .Ic visual-activity ,
1643: display a message when content is present in a window
1.39 jmc 1644: for which the
1.37 nicm 1645: .Ic monitor-content
1646: window option is enabled.
1.1 nicm 1647: .El
1648: .It Xo Ic set-window-option
1.58 nicm 1649: .Op Fl agu
1.1 nicm 1650: .Op Fl t Ar target-window
1651: .Ar option Ar value
1652: .Xc
1653: .D1 (alias: Ic setw )
1.18 nicm 1654: Set a window option.
1.1 nicm 1655: The
1.58 nicm 1656: .Fl a ,
1.1 nicm 1657: .Fl g
1658: and
1659: .Fl u
1660: flags work similarly to the
1661: .Ic set-option
1662: command.
1663: .Pp
1.18 nicm 1664: Supported window options are:
1.56 jmc 1665: .Pp
1666: .Bl -tag -width Ds -compact
1.1 nicm 1667: .It Xo Ic aggressive-resize
1.56 jmc 1668: .Op Ic on | off
1.1 nicm 1669: .Xc
1670: Aggressively resize the chosen window.
1671: This means that
1672: .Nm
1673: will resize the window to the size of the smallest session for which it is the
1674: current window, rather than the smallest session to which it is attached.
1675: The window may resize when the current window is changed on another sessions;
1.6 jmc 1676: this option is good for full-screen programs which support
1677: .Dv SIGWINCH
1678: and poor for interactive programs such as shells.
1.56 jmc 1679: .Pp
1.1 nicm 1680: .It Xo Ic automatic-rename
1.56 jmc 1681: .Op Ic on | off
1.1 nicm 1682: .Xc
1683: Control automatic window renaming.
1684: When this setting is enabled,
1685: .Nm
1686: will attempt - on supported platforms - to rename the window to reflect the
1687: command currently running in it.
1688: This flag is automatically disabled for an individual window when a name
1689: is specified at creation with
1690: .Ic new-window or
1691: .Ic new-session ,
1692: or later with
1693: .Ic rename-window .
1694: It may be switched off globally with:
1695: .Bd -literal -offset indent
1696: set-window-option -g automatic-rename off
1697: .Ed
1.56 jmc 1698: .Pp
1.1 nicm 1699: .It Ic clock-mode-colour Ar colour
1700: Set clock colour.
1.56 jmc 1701: .Pp
1.1 nicm 1702: .It Xo Ic clock-mode-style
1.56 jmc 1703: .Op Ic 12 | 24
1.1 nicm 1704: .Xc
1705: Set clock hour format.
1.56 jmc 1706: .Pp
1.1 nicm 1707: .It Ic force-height Ar height
1708: .It Ic force-width Ar width
1709: Prevent
1710: .Nm
1711: from resizing a window to greater than
1712: .Ar width
1713: or
1714: .Ar height .
1715: A value of zero restores the default unlimited setting.
1.56 jmc 1716: .Pp
1.2 nicm 1717: .It Ic main-pane-width Ar width
1718: .It Ic main-pane-height Ar height
1719: Set the width or height of the main (left or top) pane in the
1720: .Ic main-horizontal
1721: or
1722: .Ic main-vertical
1723: layouts.
1.56 jmc 1724: .Pp
1.1 nicm 1725: .It Ic mode-attr Ar attributes
1726: Set window modes attributes.
1.56 jmc 1727: .Pp
1.1 nicm 1728: .It Ic mode-bg Ar colour
1729: Set window modes background colour.
1.56 jmc 1730: .Pp
1.1 nicm 1731: .It Ic mode-fg Ar colour
1732: Set window modes foreground colour.
1.56 jmc 1733: .Pp
1.1 nicm 1734: .It Xo Ic mode-keys
1.56 jmc 1735: .Op Ic vi | emacs
1.1 nicm 1736: .Xc
1.105 nicm 1737: Use vi or emacs-style key bindings in copy and choice modes.
1.1 nicm 1738: Key bindings default to emacs.
1.56 jmc 1739: .Pp
1.50 nicm 1740: .It Xo Ic mode-mouse
1.56 jmc 1741: .Op Ic on | off
1.50 nicm 1742: .Xc
1.51 jmc 1743: Mouse state in modes.
1744: If on,
1.50 nicm 1745: .Nm
1746: will respond to mouse clicks by moving the cursor in copy mode or selecting an
1747: option in choice mode.
1.56 jmc 1748: .Pp
1.1 nicm 1749: .It Xo Ic monitor-activity
1.56 jmc 1750: .Op Ic on | off
1.1 nicm 1751: .Xc
1752: Monitor for activity in the window.
1753: Windows with activity are highlighted in the status line.
1.56 jmc 1754: .Pp
1755: .It Ic monitor-content Ar match-string
1.6 jmc 1756: Monitor content in the window.
1757: When
1.16 nicm 1758: .Xr fnmatch 3
1759: pattern
1.1 nicm 1760: .Ar match-string
1761: appears in the window, it is highlighted in the status line.
1.56 jmc 1762: .Pp
1.1 nicm 1763: .It Xo Ic remain-on-exit
1.56 jmc 1764: .Op Ic on | off
1.1 nicm 1765: .Xc
1766: A window with this flag set is not destroyed when the program running in it
1767: exits.
1768: The window may be reactivated with the
1769: .Ic respawn-window
1770: command.
1.56 jmc 1771: .Pp
1.99 nicm 1772: .It Xo Ic synchronize-panes
1773: .Op Ic on | off
1774: .Xc
1775: Duplicate input to any pane to all other panes in the same window, except
1776: for panes that are not in output mode.
1.1 nicm 1777: .It Xo Ic utf8
1.56 jmc 1778: .Op Ic on | off
1.1 nicm 1779: .Xc
1780: Instructs
1781: .Nm
1782: to expect UTF-8 sequences to appear in this window.
1.56 jmc 1783: .Pp
1.1 nicm 1784: .It Ic window-status-attr Ar attributes
1785: Set status line attributes for a single window.
1.56 jmc 1786: .Pp
1.1 nicm 1787: .It Ic window-status-bg Ar colour
1788: Set status line background colour for a single window.
1.56 jmc 1789: .Pp
1.1 nicm 1790: .It Ic window-status-fg Ar colour
1791: Set status line foreground colour for a single window.
1.56 jmc 1792: .Pp
1.125 nicm 1793: .It Ic window-status-format Ar string
1794: Set the format in which the window is displayed in the status line window list.
1795: See the
1796: .Ar status-left
1797: option for details of special character sequences available.
1798: The default is
1799: .Ql #I:#W#F .
1800: .Pp
1.40 nicm 1801: .It Ic window-status-current-attr Ar attributes
1802: Set status line attributes for the currently active window.
1.56 jmc 1803: .Pp
1.40 nicm 1804: .It Ic window-status-current-bg Ar colour
1805: Set status line background colour for the currently active window.
1.56 jmc 1806: .Pp
1.40 nicm 1807: .It Ic window-status-current-fg Ar colour
1808: Set status line foreground colour for the currently active window.
1.56 jmc 1809: .Pp
1.125 nicm 1810: .It Ic window-status-current-format Ar string
1811: Like
1812: .Ar window-status-format ,
1813: but is the format used when the window is the current window.
1814: .Pp
1.1 nicm 1815: .It Xo Ic xterm-keys
1.56 jmc 1816: .Op Ic on | off
1.1 nicm 1817: .Xc
1818: If this option is set,
1819: .Nm
1820: will generate
1.57 jmc 1821: .Xr xterm 1 -style
1822: function key sequences; these have a number included to indicate modifiers such
1823: as Shift, Alt or Ctrl.
1.123 nicm 1824: The default is off.
1.57 jmc 1825: .El
1826: .It Xo Ic show-options
1827: .Op Fl g
1828: .Op Fl t Ar target-session
1829: .Xc
1830: .D1 (alias: Ic show )
1831: Show the session options for
1832: .Ar target session ,
1833: or the global session options with
1834: .Fl g .
1835: .It Xo Ic show-window-options
1836: .Op Fl g
1837: .Op Fl t Ar target-window
1838: .Xc
1839: .D1 (alias: Ic showw )
1840: List the window options for
1841: .Ar target-window ,
1842: or the global window options if
1843: .Fl g
1844: is used.
1.63 nicm 1845: .El
1846: .Sh ENVIRONMENT
1847: When the server is started,
1848: .Nm
1849: copies the environment into the
1850: .Em global environment ;
1851: in addition, each session has a
1852: .Em session environment .
1853: When a window is created, the session and global environments are merged with
1854: the session environment overriding any variable present in both.
1855: This is the initial environment passed to the new process.
1856: .Pp
1857: The
1858: .Ic update-environment
1859: session option may be used to update the session environment from the client
1860: when a new session is created or an old reattached.
1861: .Nm
1862: also initialises the
1863: .Ev TMUX
1864: variable with some internal information to allow commands to be executed
1865: from inside, and the
1866: .Ev TERM
1867: variable with the correct terminal setting of
1868: .Ql screen .
1869: .Pp
1870: Commands to alter and view the environment are:
1871: .Bl -tag -width Ds
1872: .It Xo Ic set-environment
1873: .Op Fl gru
1874: .Op Fl t Ar target-session
1875: .Ar name Op Ar value
1876: .Xc
1.115 nicm 1877: .D1 (alias: Ic setenv )
1.63 nicm 1878: Set or unset an environment variable.
1879: If
1880: .Fl g
1881: is used, the change is made in the global environment; otherwise, it is applied
1882: to the session environment for
1883: .Ar target-session .
1884: The
1885: .Fl u
1886: flag unsets a variable.
1887: .Fl r
1888: indicates the variable is to be removed from the environment before starting a
1889: new process.
1890: .It Xo Ic show-environment
1891: .Op Fl g
1892: .Op Fl t Ar target-session
1893: .Xc
1.115 nicm 1894: .D1 (alias: Ic showenv )
1.63 nicm 1895: Display the environment for
1896: .Ar target-session
1897: or the global environment with
1898: .Fl g .
1899: Variables removed from the environment are prefixed with
1900: .Ql - .
1.57 jmc 1901: .El
1902: .Sh STATUS LINE
1903: .Nm
1904: includes an optional status line which is displayed in the bottom line of each
1905: terminal.
1906: By default, the status line is enabled (it may be disabled with the
1907: .Ic status
1908: session option) and contains, from left-to-right: the name of the current
1909: session in square brackets; the window list; the current window title in double
1910: quotes; and the time and date.
1911: .Pp
1912: The status line is made of three parts: configurable left and right sections
1913: (which may contain dynamic content such as the time or output from a shell
1914: command, see the
1915: .Ic status-left ,
1916: .Ic status-left-length ,
1917: .Ic status-right ,
1918: and
1919: .Ic status-right-length
1920: options below), and a central window list.
1.125 nicm 1921: By default, the window list shows the index, name and (if any) flag of the
1922: windows present in the current session in ascending numerical order.
1923: It may be customised with the
1924: .Ar window-status-format
1925: and
1926: .Ar window-status-current-format
1927: options.
1.57 jmc 1928: The flag is one of the following symbols appended to the window name:
1929: .Bl -column "Symbol" "Meaning" -offset indent
1930: .It Sy "Symbol" Ta Sy "Meaning"
1931: .It Li "*" Ta "Denotes the current window."
1932: .It Li "-" Ta "Marks the last window (previously selected)."
1933: .It Li "#" Ta "Window is monitored and activity has been detected."
1934: .It Li "!" Ta "A bell has occurred in the window."
1935: .It Li "+" Ta "Window is monitored for content and it has appeared."
1936: .El
1937: .Pp
1938: The # symbol relates to the
1939: .Ic monitor-activity
1940: and + to the
1941: .Ic monitor-content
1942: window options.
1943: The window name is printed in inverted colours if an alert (bell, activity or
1944: content) is present.
1945: .Pp
1946: The colour and attributes of the status line may be configured, the entire status line using
1947: the
1948: .Ic status-attr ,
1949: .Ic status-fg
1950: and
1951: .Ic status-bg
1952: session options and individual windows using the
1953: .Ic window-status-attr ,
1954: .Ic window-status-fg
1955: and
1956: .Ic window-status-bg
1957: window options.
1958: .Pp
1959: The status line is automatically refreshed at interval if it has changed, the interval may be
1960: controlled with the
1961: .Ic status-interval
1962: session option.
1963: .Pp
1964: Commands related to the status line are as follows:
1965: .Bl -tag -width Ds
1966: .It Xo Ic command-prompt
1.73 nicm 1967: .Op Fl p Ar prompts
1.57 jmc 1968: .Op Fl t Ar target-client
1969: .Op Ar template
1970: .Xc
1971: Open the command prompt in a client.
1972: This may be used from inside
1973: .Nm
1974: to execute commands interactively.
1975: If
1976: .Ar template
1.73 nicm 1977: is specified, it is used as the command.
1978: If
1979: .Fl p
1980: is given,
1981: .Ar prompts
1982: is a comma-separated list of prompts which are displayed in order; otherwise
1983: a single prompt is displayed, constructed from
1984: .Ar template
1985: if it is present, or
1986: .Ql \&:
1987: if not.
1988: Before the command is executed, the first occurrence of the string
1989: .Ql %%
1.74 jmc 1990: and all occurrences of
1.73 nicm 1991: .Ql %1
1992: are replaced by the response to the first prompt, the second
1993: .Ql %%
1994: and all
1995: .Ql %2
1996: are replaced with the response to the second prompt, and so on for further
1.74 jmc 1997: prompts.
1998: Up to nine prompt responses may be replaced
1999: .Po
2000: .Ql %1
1.73 nicm 2001: to
1.74 jmc 2002: .Ql %9
2003: .Pc .
1.57 jmc 2004: .It Xo Ic confirm-before
2005: .Op Fl t Ar target-client
2006: .Ar command
2007: .Xc
2008: .D1 (alias: Ic confirm )
2009: Ask for confirmation before executing
2010: .Ar command .
2011: This command works only from inside
2012: .Nm .
2013: .It Xo Ic display-message
2014: .Op Fl t Ar target-client
2015: .Op Ar message
2016: .Xc
2017: .D1 (alias: Ic display )
1.122 nicm 2018: Display a message in the status line.
2019: The format of
1.124 jmc 2020: .Ar message
2021: is as for
1.122 nicm 2022: .Ic status-left ,
2023: with the exception that #() are not handled.
1.57 jmc 2024: .It Ic select-prompt Op Fl t Ar target-client
2025: Open a prompt inside
2026: .Ar target-client
2027: allowing a window index to be entered interactively.
2028: .El
2029: .Sh BUFFERS
2030: .Nm
2031: maintains a stack of
2032: .Em paste buffers
2033: for each session.
2034: Up to the value of the
2035: .Ic buffer-limit
2036: option are kept; when a new buffer is added, the buffer at the bottom of the
2037: stack is removed.
2038: Buffers may be added using
2039: .Ic copy-mode
2040: or the
2041: .Ic set-buffer
2042: command, and pasted into a window using the
2043: .Ic paste-buffer
2044: command.
2045: .Pp
2046: A configurable history buffer is also maintained for each window.
2047: By default, up to 2000 lines are kept; this can be altered with the
2048: .Ic history-limit
2049: option (see the
2050: .Ic set-option
2051: command above).
2052: .Pp
2053: The buffer commands are as follows:
2054: .Bl -tag -width Ds
2055: .It Ic clear-history Op Fl t Ar target-pane
2056: .D1 (alias: Ic clearhist )
2057: Remove and free the history for the specified pane.
2058: .It Xo Ic copy-buffer
2059: .Op Fl a Ar src-index
2060: .Op Fl b Ar dst-index
2061: .Op Fl s Ar src-session
2062: .Op Fl t Ar dst-session
2063: .Xc
2064: .D1 (alias: Ic copyb )
2065: Copy a session paste buffer to another session.
2066: If no sessions are specified, the current one is used instead.
2067: .It Xo Ic delete-buffer
2068: .Op Fl b Ar buffer-index
2069: .Op Fl t Ar target-session
2070: .Xc
2071: .D1 (alias: Ic deleteb )
2072: Delete the buffer at
2073: .Ar buffer-index ,
2074: or the top buffer if not specified.
2075: .It Ic list-buffers Op Fl t Ar target-session
2076: .D1 (alias: Ic lsb )
2077: List the buffers in the given session.
2078: .It Xo Ic load-buffer
2079: .Op Fl b Ar buffer-index
2080: .Op Fl t Ar target-session
2081: .Ar path
2082: .Xc
2083: .D1 (alias: Ic loadb )
2084: Load the contents of the specified paste buffer from
2085: .Ar path .
2086: .It Xo Ic paste-buffer
2087: .Op Fl dr
2088: .Op Fl b Ar buffer-index
2089: .Op Fl t Ar target-window
2090: .Xc
2091: .D1 (alias: Ic pasteb )
2092: Insert the contents of a paste buffer into the current window.
2093: With
2094: .Fl d ,
2095: also delete the paste buffer from the stack.
2096: When output, any linefeed (LF) characters in the paste buffer are replaced with
2097: carriage returns (CR).
2098: This translation may be disabled with the
2099: .Fl r
2100: flag.
2101: .It Xo Ic save-buffer
2102: .Op Fl a
2103: .Op Fl b Ar buffer-index
2104: .Op Fl t Ar target-session
2105: .Ar path
2106: .Xc
2107: .D1 (alias: Ic saveb )
2108: Save the contents of the specified paste buffer to
2109: .Ar path .
2110: The
2111: .Fl a
2112: option appends to rather than overwriting the file.
2113: .It Xo Ic set-buffer
2114: .Op Fl b Ar buffer-index
2115: .Op Fl t Ar target-session
2116: .Ar data
2117: .Xc
2118: .D1 (alias: Ic setb )
2119: Set the contents of the specified buffer to
2120: .Ar data .
1.1 nicm 2121: .It Xo Ic show-buffer
2122: .Op Fl b Ar buffer-index
2123: .Op Fl t Ar target-session
2124: .Xc
2125: .D1 (alias: Ic showb )
2126: Display the contents of the specified buffer.
1.57 jmc 2127: .El
2128: .Sh MISCELLANEOUS
2129: .Pp
2130: Miscellaneous commands are as follows:
2131: .Bl -tag -width Ds
1.72 nicm 2132: .It Ic clock-mode Op Fl t Ar target-pane
1.57 jmc 2133: Display a large clock.
2134: .It Ic if-shell Ar shell-command command
2135: .D1 (alias: Ic if )
2136: Execute
2137: .Ar command
2138: if
2139: .Ar shell-command
2140: returns success.
2141: .It Ic lock-server
2142: .D1 (alias: Ic lock )
1.90 nicm 2143: Lock each client individually by running the command specified by the
2144: .Ic lock-command
2145: option.
1.87 nicm 2146: .It Ic run-shell Ar command
2147: .D1 (alias: Ic run )
2148: Execute
2149: .Ar command
1.106 nicm 2150: in the background without creating a window.
2151: After the command finishes, any output to stdout is displayed in output mode.
1.87 nicm 2152: If
1.88 jmc 2153: .Ar command
1.87 nicm 2154: doesn't return success, the exit status is also displayed.
1.57 jmc 2155: .It Ic server-info
2156: .D1 (alias: Ic info )
2157: Show server information and terminal details.
1.1 nicm 2158: .El
2159: .Sh FILES
1.26 nicm 2160: .Bl -tag -width "/etc/tmux.confXXX" -compact
1.1 nicm 2161: .It Pa ~/.tmux.conf
1.6 jmc 2162: Default
1.1 nicm 2163: .Nm
1.6 jmc 2164: configuration file.
1.26 nicm 2165: .It Pa /etc/tmux.conf
2166: System-wide configuration file.
1.1 nicm 2167: .El
1.57 jmc 2168: .Sh EXAMPLES
2169: To create a new
2170: .Nm
2171: session running
2172: .Xr vi 1 :
2173: .Pp
2174: .Dl $ tmux new-session vi
2175: .Pp
2176: Most commands have a shorter form, known as an alias.
2177: For new-session, this is
2178: .Ic new :
2179: .Pp
2180: .Dl $ tmux new vi
2181: .Pp
2182: Alternatively, the shortest unambiguous form of a command is accepted.
2183: If there are several options, they are listed:
2184: .Bd -literal -offset indent
2185: $ tmux n
2186: ambiguous command: n, could be: new-session, new-window, next-window
2187: .Ed
2188: .Pp
2189: Within an active session, a new window may be created by typing
2190: .Ql C-b c
2191: (Ctrl
2192: followed by the
2193: .Ql b
2194: key
2195: followed by the
2196: .Ql c
2197: key).
2198: .Pp
2199: Windows may be navigated with:
2200: .Ql C-b 0
2201: (to select window 0),
2202: .Ql C-b 1
2203: (to select window 1), and so on;
2204: .Ql C-b n
2205: to select the next window; and
2206: .Ql C-b p
2207: to select the previous window.
2208: .Pp
2209: A session may be detached using
2210: .Ql C-b d
1.64 nicm 2211: (or by an external event such as
2212: .Xr ssh 1
2213: disconnection) and reattached with:
1.57 jmc 2214: .Pp
2215: .Dl $ tmux attach-session
2216: .Pp
2217: Typing
2218: .Ql C-b \&?
2219: lists the current key bindings in the current window; up and down may be used
2220: to navigate the list or
2221: .Ql q
2222: to exit from it.
2223: .Pp
2224: Commands to be run when the
2225: .Nm
2226: server is started may be placed in the
2227: .Pa ~/.tmux.conf
2228: configuration file.
2229: Common examples include:
2230: .Pp
2231: Changing the default prefix key:
2232: .Bd -literal -offset indent
2233: set-option -g prefix C-a
2234: unbind-key C-b
2235: bind-key C-a send-prefix
2236: .Ed
2237: .Pp
2238: Turning the status line off, or changing its colour:
2239: .Bd -literal -offset indent
2240: set-option -g status off
2241: set-option -g status-bg blue
2242: .Ed
2243: .Pp
2244: Setting other options, such as the default command,
2245: or locking after 30 minutes of inactivity:
2246: .Bd -literal -offset indent
2247: set-option -g default-command "exec /bin/ksh"
2248: set-option -g lock-after-time 1800
2249: .Ed
2250: .Pp
2251: Creating new key bindings:
2252: .Bd -literal -offset indent
2253: bind-key b set-option status
2254: bind-key / command-prompt "split-window 'exec man %%'"
1.73 nicm 2255: bind-key S command-prompt "new-window -n %1 'ssh %1'"
1.57 jmc 2256: .Ed
1.1 nicm 2257: .Sh SEE ALSO
2258: .Xr pty 4
2259: .Sh AUTHORS
2260: .An Nicholas Marriott Aq nicm@users.sourceforge.net