=================================================================== RCS file: /cvsrepo/anoncvs/cvs/www/45.html,v retrieving revision 1.53 retrieving revision 1.54 diff -c -r1.53 -r1.54 *** www/45.html 2015/08/06 21:50:20 1.53 --- www/45.html 2016/03/21 05:46:19 1.54 *************** *** 62,69 ****

Initial ports to the xscale based gumstix platform and the ARM based OpenMoko

OpenBSD/sparc64

New vdsk(4) ! and vnet(4) drivers provide support for virtual I/O between logical domains on Sun's CoolThreads servers, including UltraSPARC T2+ machines.
Workstations and laptops with UltraSPARC IIe CPUs can now scale --- 62,69 ----
Initial ports to the xscale based gumstix platform and the ARM based OpenMoko
OpenBSD/sparc64
- New vdsk(4) ! and vnet(4) drivers provide support for virtual I/O between logical domains on Sun's CoolThreads servers, including UltraSPARC T2+ machines.
- Workstations and laptops with UltraSPARC IIe CPUs can now scale *************** *** 76,182 ****
  - Several new/improved drivers for sensors, including:
    - The cac(4) driver now has bio and sensor support. !
    - The mpi(4) driver now has bio and sensor support. !
    - New gpiodcf(4) driver for DCF77/HBG timedelta sensors through GPIO pins. !
    - New schsio(4) driver for SMSC SCH311x LPC Super I/O devices. !
    - The it(4) driver now supports IT8720F chips. !
    - The it(4) driver now supports FAN4 and FAN5 sensors for IT8716F/IT8718F/IT8720F/IT8726F chips. !
    - The owtemp(4) driver now supports Maxim/Dallas DS18B20 and DS1822 temperature sensors. !
    - The km(4) driver now supports AMD Family 11h processors (Turion X2 Ultra et al). !
    - The lm(4) driver now supports W83627DHG attachment on the I²C bus. !
    - The lmenv(4) driver now has better support for the fan sensors on lm81, adm9240 and ds1780 chips. !
    - The sdtemp(4) driver now supports ST STTS424 chips.
    !
  - The em(4) driver now supports ICH9 IGP M and IGP M AMT chips, and link status detection has improved. !
  - The sdmmc(4) driver now supports SDHC cards. !
  - The msk(4) driver now supports Yukon-2 FE+ (88E8040, 88E8042) based devices. !
  - The iwn(4) driver now supports Intel WiFi Link 5100/5300 devices. !
  - The wpi(4) and iwn(4) drivers now support hardware CCMP cryptography. !
  - The ath(4) driver now has WPA-PSK support. !
  - age(4), a driver for Attansic L1 gigabit Ethernet devices was added. !
  - ale(4), a driver for Atheros AR81xx (aka Attansic L1E) Ethernet devices was added. !
  - mos(4), a driver for Moschip MCS7730/7830 10/100 USB Ethernet devices was added. !
  - jme(4), a driver for JMicron JMC250/JMC260 10/100 and Gigabit Ethernet devices was added. !
  - run(4), a driver for Ralink USB IEEE 802.11a/b/g/Draft-N devices was added. !
  - auacer(4), a driver for Acer Labs M5455 audio devices was added. !
  - ifb(4), a driver for Sun Expert3D, Expert3D-Lite, XVR-500, XVR-600 and XVR-1200 framebuffers (accelerated). !
  - wildcatfb(4), an X driver for Sun Expert3D, Expert3D-Lite, XVR-500, XVR-600 and XVR-1200 framebuffers (unaccelerated). !
  - sunffb(4), an accelerated X driver for Sun Creator, Creator 3D and Elite 3D framebuffers. !
  - vdsk(4), a driver for virtual disks of sun4v logical domains. !
  - vnet(4), a driver for virtual network adapters of sun4v logical domains. !
  - vrng(4), a driver for the random number generator on Sun UltraSPARC T2/T2+ CPUs. !
  - The vcons(4) driver is now interrupt driven. !
  - ips(4), a driver for IBM SATA/SCSI ServeRAID controllers was added. !
  - udfu(4), a driver for device firmware upgrade (DFU) was added.
  - Many improvements were made to the ! acpi(4) subsystem. !
  - The umsm(4) driver supports several new EVDO/UMTS devices. !
  - The mfi(4) driver now supports the next generation of MegaRAID SAS controllers. !
  - New vsbic(4) driver for the MVME327A SCSI and floppy controller on mvme68k and mvme88k machines. !
  - The re(4) driver now supports 8168D/8111D-based devices, and multicast reception on 8110SB/SC-based devices. !
  - The ehci(4) driver now supports isochronous transfers.
  - S/PDIF output support has been added to the ! ac97(4), ! auich(4), ! auvia(4) and ! azalia(4) drivers. !
  - azalia(4) mixer has been clarified and simplified, support for 20-bit and 24-bit encodings has been added. !
  - The gbe(4) frame buffer driver now supports acceleration.
- New tools:
  - ypldap(8), an YP server using LDAP as a backend. !
  - xcompmgr(1) was added to xenocara.
  --- 76,182 ----
  - Several new/improved drivers for sensors, including:
    - The cac(4) driver now has bio and sensor support. !
    - The mpi(4) driver now has bio and sensor support. !
    - New gpiodcf(4) driver for DCF77/HBG timedelta sensors through GPIO pins. !
    - New schsio(4) driver for SMSC SCH311x LPC Super I/O devices. !
    - The it(4) driver now supports IT8720F chips. !
    - The it(4) driver now supports FAN4 and FAN5 sensors for IT8716F/IT8718F/IT8720F/IT8726F chips. !
    - The owtemp(4) driver now supports Maxim/Dallas DS18B20 and DS1822 temperature sensors. !
    - The km(4) driver now supports AMD Family 11h processors (Turion X2 Ultra et al). !
    - The lm(4) driver now supports W83627DHG attachment on the I²C bus. !
    - The lmenv(4) driver now has better support for the fan sensors on lm81, adm9240 and ds1780 chips. !
    - The sdtemp(4) driver now supports ST STTS424 chips.
    !
  - The em(4) driver now supports ICH9 IGP M and IGP M AMT chips, and link status detection has improved. !
  - The sdmmc(4) driver now supports SDHC cards. !
  - The msk(4) driver now supports Yukon-2 FE+ (88E8040, 88E8042) based devices. !
  - The iwn(4) driver now supports Intel WiFi Link 5100/5300 devices. !
  - The wpi(4) and iwn(4) drivers now support hardware CCMP cryptography. !
  - The ath(4) driver now has WPA-PSK support. !
  - age(4), a driver for Attansic L1 gigabit Ethernet devices was added. !
  - ale(4), a driver for Atheros AR81xx (aka Attansic L1E) Ethernet devices was added. !
  - mos(4), a driver for Moschip MCS7730/7830 10/100 USB Ethernet devices was added. !
  - jme(4), a driver for JMicron JMC250/JMC260 10/100 and Gigabit Ethernet devices was added. !
  - run(4), a driver for Ralink USB IEEE 802.11a/b/g/Draft-N devices was added. !
  - auacer(4), a driver for Acer Labs M5455 audio devices was added. !
  - ifb(4), a driver for Sun Expert3D, Expert3D-Lite, XVR-500, XVR-600 and XVR-1200 framebuffers (accelerated). !
  - wildcatfb(4), an X driver for Sun Expert3D, Expert3D-Lite, XVR-500, XVR-600 and XVR-1200 framebuffers (unaccelerated). !
  - sunffb(4), an accelerated X driver for Sun Creator, Creator 3D and Elite 3D framebuffers. !
  - vdsk(4), a driver for virtual disks of sun4v logical domains. !
  - vnet(4), a driver for virtual network adapters of sun4v logical domains. !
  - vrng(4), a driver for the random number generator on Sun UltraSPARC T2/T2+ CPUs. !
  - The vcons(4) driver is now interrupt driven. !
  - ips(4), a driver for IBM SATA/SCSI ServeRAID controllers was added. !
  - udfu(4), a driver for device firmware upgrade (DFU) was added.
  - Many improvements were made to the ! acpi(4) subsystem. !
  - The umsm(4) driver supports several new EVDO/UMTS devices. !
  - The mfi(4) driver now supports the next generation of MegaRAID SAS controllers. !
  - New vsbic(4) driver for the MVME327A SCSI and floppy controller on mvme68k and mvme88k machines. !
  - The re(4) driver now supports 8168D/8111D-based devices, and multicast reception on 8110SB/SC-based devices. !
  - The ehci(4) driver now supports isochronous transfers.
  - S/PDIF output support has been added to the ! ac97(4), ! auich(4), ! auvia(4) and ! azalia(4) drivers. !
  - azalia(4) mixer has been clarified and simplified, support for 20-bit and 24-bit encodings has been added. !
  - The gbe(4) frame buffer driver now supports acceleration.
- New tools:
  - ypldap(8), an YP server using LDAP as a backend. !
  - xcompmgr(1) was added to xenocara.
  *************** *** 184,215 ****
- New functionality:
  - The libc ! resolver(3) may now be forced to perform lookups by TCP only using a new ! resolv.conf(5) option. The nameserver declaration in ! resolv.conf(5) has also been extended to allow specification of non-default nameserver ports. !
  - apropos(1) has two new options (-S and -s) to allow searching by machine architecture and manual section. !
  - aucat(1) now has audio server capability. Audio devices can be shared between multiple applications. Applications can run natively on fixed sample rate devices or on devices with unusual encodings. Multi-channel audio devices can be split into smaller independent subdevices. !
  - aucat(1) now has a deviceless mode, in which it can be used as a general purpose audio file format conversion utility (to mix, demultiplex, resample or reencode files). !
  - ifconfig(8) can now list channels supported by an IEEE 802.11 device.
  - New views were added to ! systat(8): malloc, bucket and pool. Improvements were made to existing views. !
  - vnconfig(8) can now create devices with arbitrary geometry with the new -t option.
  - FFS filesystems are now supported on most devices, e.g. CD's, that have sector sizes other than 512 bytes.
  - Disklabels are now correctly placed and found on most devices, e.g. CD's, --- 184,215 ----
  - New functionality:
    - The libc ! resolver(3) may now be forced to perform lookups by TCP only using a new ! resolv.conf(5) option. The nameserver declaration in ! resolv.conf(5) has also been extended to allow specification of non-default nameserver ports. !
    - apropos(1) has two new options (-S and -s) to allow searching by machine architecture and manual section. !
    - aucat(1) now has audio server capability. Audio devices can be shared between multiple applications. Applications can run natively on fixed sample rate devices or on devices with unusual encodings. Multi-channel audio devices can be split into smaller independent subdevices. !
    - aucat(1) now has a deviceless mode, in which it can be used as a general purpose audio file format conversion utility (to mix, demultiplex, resample or reencode files). !
    - ifconfig(8) can now list channels supported by an IEEE 802.11 device.
    - New views were added to ! systat(8): malloc, bucket and pool. Improvements were made to existing views. !
    - vnconfig(8) can now create devices with arbitrary geometry with the new -t option.
    - FFS filesystems are now supported on most devices, e.g. CD's, that have sector sizes other than 512 bytes.
    - Disklabels are now correctly placed and found on most devices, e.g. CD's, *************** *** 219,252 ****
    - Assorted improvements and code cleanup:
      - malloc(3) has gained new attack mitigation measures; critical bookkeeping structures are protected at runtime using ! mprotect(2) and allocated at random addresses where possible.
      - A new version of the gdtoa code has been integrated, bringing better C99 support to ! printf(3) and friends.
      - Vastly improved C99 support in libm, including complex math support.
      - The ! sppp(4) layer and thus kernel ! pppoe(4) now support usernames and passwords of up to 255 characters.
      - Recognize and spoof disklabel entries for more FAT and FAT32 variants.
      - Automatically recognize tapes with 64K records. !
      - Improve option handling in dhcpd(8).
      - When booting from a cd the root file system is now assumed to be on the cd, rather than always asking for the location.
      - Disklabels constructed from native disklabels are now subject to the same consistancy checks as all other disklabels.
      - No longer display geometry information for ! sd(4) disk drives, since it was mostly fictitious these days.
      - Fix handling of tftp ERROR frames so OpenBSD pxeboot can be loaded from picky tftp servers.
      - Many ! scsi(4) drivers now retry operations that can't be immediately started rather than giving up.
      - MBR and DPME disklabels are no longer written out with invalid checksum --- 219,252 ----
      - Assorted improvements and code cleanup:
        !
        malloc(3) has gained new attack mitigation measures; critical bookkeeping structures are protected at runtime using ! mprotect(2) and allocated at random addresses where possible.
        A new version of the gdtoa code has been integrated, bringing better C99 support to ! printf(3) and friends.
        Vastly improved C99 support in libm, including complex math support.
        The ! sppp(4) layer and thus kernel ! pppoe(4) now support usernames and passwords of up to 255 characters.
        Recognize and spoof disklabel entries for more FAT and FAT32 variants.
        Automatically recognize tapes with 64K records. !
        Improve option handling in dhcpd(8).
        When booting from a cd the root file system is now assumed to be on the cd, rather than always asking for the location.
        Disklabels constructed from native disklabels are now subject to the same consistancy checks as all other disklabels.
        No longer display geometry information for ! sd(4) disk drives, since it was mostly fictitious these days.
        Fix handling of tftp ERROR frames so OpenBSD pxeboot can be loaded from picky tftp servers.
        Many ! scsi(4) drivers now retry operations that can't be immediately started rather than giving up.
        MBR and DPME disklabels are no longer written out with invalid checksum *************** *** 257,274 ****
        Install/Upgrade process changes:
        
        crunchgen(1) and crunchide(1) have been merged into ! crunchgen(8), which is now built and installed by default. !
        mksuncd(1) now lives in base and is installed by default.
        CD-ROM installs are now supported on SGI.
        Accept initial root passwords containing backslash characters.
        Install now allows multiple interfaces to be configured with ! dhcp(8). !
        Upgrades now use the minimal protocols(5) ! and services(5) files provided on the install media.
        The install media no longer contain a ! disktab(5) file.
        Serial console speed is correctly determined on macppc.
        
        --- 257,274 ----
        Install/Upgrade process changes:
        
        crunchgen(1) and crunchide(1) have been merged into ! crunchgen(8), which is now built and installed by default. !
        mksuncd(1) now lives in base and is installed by default.
        CD-ROM installs are now supported on SGI.
        Accept initial root passwords containing backslash characters.
        Install now allows multiple interfaces to be configured with ! dhcp(8). !
        Upgrades now use the minimal protocols(5) ! and services(5) files provided on the install media.
        The install media no longer contain a ! disktab(5) file.
        Serial console speed is correctly determined on macppc.
        
        *************** *** 278,327 ****
        New features:
        
        Added an option to ! ssh(1) to force logging to syslog rather than stderr.
        The ! sshd_config(5) ForceCommand directive now accepts commandline arguments for the internal-sftp server.
        The ! ssh(1) ~C escape commandline now support runtime creation of dynamic port forwards.
        Support the SOCKS4A protocol in ! ssh(1) dynamic forwards.
        Support remote port forwarding with a listen port of '0'. !
        sshd(8) now supports setting PermitEmptyPasswords and AllowAgentForwarding in Match blocks.
        
        The following significant bugs have been fixed in this release:
        
        Repair a ! ssh(1) crash introduced in openssh-5.1 when the client is sent a zero-length banner.
        The eow@openssh.com and no-more-sessions@openssh.com protocol extensions are now only sent to peers that identify themselves as OpenSSH.
        Avoid printing "Non-public channel" warnings in ! sshd(8), since ! ssh(1) has sent incorrect channel numbers since ~2004; make ! ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE.
        Avoid double-free in ! ssh(1) ~C escape -L handler.
        Correct fail-on-error behaviour in ! sftp(1) batchmode for remote stat operations.
        Avoid hang in ! ssh(1) when attempting to connect to a server that has MaxSessions set to zero.
        --- 278,327 ----
        New features:
        
        Added an option to ! ssh(1) to force logging to syslog rather than stderr.
        The ! sshd_config(5) ForceCommand directive now accepts commandline arguments for the internal-sftp server.
        The ! ssh(1) ~C escape commandline now support runtime creation of dynamic port forwards.
        Support the SOCKS4A protocol in ! ssh(1) dynamic forwards.
        Support remote port forwarding with a listen port of '0'. !
        sshd(8) now supports setting PermitEmptyPasswords and AllowAgentForwarding in Match blocks.
        
        The following significant bugs have been fixed in this release:
        
        Repair a ! ssh(1) crash introduced in openssh-5.1 when the client is sent a zero-length banner.
        The eow@openssh.com and no-more-sessions@openssh.com protocol extensions are now only sent to peers that identify themselves as OpenSSH.
        Avoid printing "Non-public channel" warnings in ! sshd(8), since ! ssh(1) has sent incorrect channel numbers since ~2004; make ! ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE.
        Avoid double-free in ! ssh(1) ~C escape -L handler.
        Correct fail-on-error behaviour in ! sftp(1) batchmode for remote stat operations.
        Avoid hang in ! ssh(1) when attempting to connect to a server that has MaxSessions set to zero.
        *************** *** 371,379 ****
        
        Xenocara (based on X.Org 7.4 + patches, freetype 2.3.7, fontconfig 2.4.2, Mesa 7.2, xterm 239 and more)
        Gcc 2.95.3 ! (+ patches) and 3.3.5 ! (+ patches)
        Perl 5.10.0 (+ patches)
        Our improved and secured version of Apache 1.3, with SSL/TLS and DSO support
        OpenSSL 0.9.8j (+ patches) --- 371,379 ----
        
        Xenocara (based on X.Org 7.4 + patches, freetype 2.3.7, fontconfig 2.4.2, Mesa 7.2, xterm 239 and more)
        Gcc 2.95.3 ! (+ patches) and 3.3.5 ! (+ patches)
        Perl 5.10.0 (+ patches)
        Our improved and secured version of Apache 1.3, with SSL/TLS and DSO support
        OpenSSL 0.9.8j (+ patches) *************** *** 464,472 **** To make a boot floppy under MS-DOS, use the "rawrite" utility located at CD1:4.5/tools/rawrite.exe. To make the boot floppy under a Unix OS, use the ! dd(1) utility. The following is an example usage of ! dd(1), where the device could be "floppy", "rfd0c", or "rfd0a". --- 464,472 ---- To make a boot floppy under MS-DOS, use the "rawrite" utility located at CD1:4.5/tools/rawrite.exe. To make the boot floppy under a Unix OS, use the ! dd(1) utility. The following is an example usage of ! dd(1), where the device could be "floppy", "rfd0c", or "rfd0a". *************** *** 747,753 **** OpenBSD ports system.
        The ports/ directory represents a CVS (see the manpage for ! cvs(1) if you aren't familiar with CVS) checkout of our ports. As with our complete source tree, our ports tree is available via anoncvs. So, in --- 747,753 ---- OpenBSD ports system.
        The ports/ directory represents a CVS (see the manpage for ! cvs(1) if you aren't familiar with CVS) checkout of our ports. As with our complete source tree, our ports tree is available via anoncvs. So, in