===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/46.html,v
retrieving revision 1.29
retrieving revision 1.30
diff -c -r1.29 -r1.30
*** www/46.html 2015/08/06 21:50:20 1.29
--- www/46.html 2016/03/21 05:46:19 1.30
***************
*** 87,182 ****
- Several new/improved drivers for sensors, including:
! - The ips(4) driver now has sensor support, complementing the bio support.
!
- The acpithinkpad(4) driver now has temperature and fan sensor support.
!
- New endrun(4) driver for the EndRun Technologies timedelta sensor.
!
- The fins(4) driver now has support for F71806, F71862 and F71882.
!
- The acpitz(4) driver now shows correct decimals for temperature.
! - Added radeonfb(4) to sparc64, an accelerated framebuffer for
Sun XVR-100 boards.
!
- Added support in re(4) for RTL8103E and RTL8168DP devices.
!
- Added support for BCM5709/BCM5716 devices in the bnx(4) driver.
!
- Added support for ICH10 variants of em(4).
!
- Added support for VIA VX855 chipset in the viapm(4) and pciide(4) drivers.
!
- Added support for Intel SCH IDE to pciide(4).
!
- Added support for the Broadcom HT-1100 chipset in the piixpm(4) driver.
!
- Added support for 82574L based devices in the em(4) driver.
!
- A number of network drivers including ix(4), sis(4), msk(4), bnx(4), and vr(4) now
use MCLGETI(9) to reduce memory usage and increase performance under load
and attack.
!
- Added support for VIA CX800 south bridge to the viapm(4) driver.
!
- Added support in em(4) for the newer 82575 (and maybe 82576) chips.
!
- zyd(4) now supports devices with Airoha AL2230S radios.
!
- zyd(4) now works on big-endian machines
!
- urtw(4) now supports RTL8187B based devices.
!
- New otus(4) driver for Atheros AR9001U USB 802.11a/b/g/Draft-N
wireless devices.
!
- New berkwdt(4) driver for Berkshire Products PCI watchdog timers.
!
- New udl(4) driver for USB video devices.
!
- Support for a variety of newer models in bge(4).
!
- Initial version of vsw(4), a driver for the virtual network switch on
sun4v sparc64s.
!
- Implemented machfb(4), an accelerated driver for the sparc64 PGX/PGX64
framebuffers.
!
- Added a vcc(4) and vcctty(4) driver for the "Virtual Console Concentrator"
found on the control domain of sun4v systems.
!
- Implemented 64-bit FIFO modes for ciss(4) devices.
!
- Enable hardware VLAN tagging/stripping on ix(4).
!
- Added basic support for Envy24HT chips in the envy(4) driver.
!
- Many improvements and updates to the isp(4) driver.
!
- Added support for 88E8057-based Yukon 2 Ultra 2-devices in msk(4).
!
- The ips(4) driver now works reliably.
!
- Added raptor(4), an accelerated framebuffer driver for the Tech Source
Raptor GFX cards on the sparc64 platform.
!
- Enabled schsio(4) on i386 and amd64 and added watchdog timer support.
!
- New acpivideo(4) driver for ACPI display switching and brightness control.
New tools:
! - Added smtpd(8), a new privilege-separated SMTP daemon.
!
- Imported the tmux(1) terminal multiplexer, replacing window(1).
!
pf(4) improvements:
! - Enabled pf(4) by default in the rc.conf(8).
!
- Removed pf(4) scrub rules, and only do one kind of packet reassembly.
Rulesets with scrub rules need to be modified because of this.
- Regular rules can now have per-rule scrub options.
- Added new "match" keyword which only applies rule options but does
not change the current pass/block state.
!
- Make all pf(4) operations transactional to improve atomicity of reloads.
!
- Stricter pf(4) checking for ICMP and ICMPv6 packets.
!
- Various improvements to pfsync(4) to lower sync traffic bandwidth and
optionally allow active-active firewall setups.
!
- Fix pf(4) scrub max-mss for IPv6 traffic.
OpenBGPD, OpenOSPFD and other routing daemon improvements:
! - In bgpd(8), rework most of the RDE to allow multiple RIBs.
It is possible to filter per-RIB and attach neighbors to a specific RIB.
!
- Added an option to bgpd(8) to change the "connect-retry" timer.
!
- Allow bgpd.conf(5) and bgpctl(8) to contain 32-bit ASN numbers written in
ASPLAIN format.
!
- Fix bgpd(8) to correctly encode MP unreachable NLRI so IPv6 prefixes get
removed correctly.
!
- Changed the behaviour of "redistribute default" for ospfd(8) and ripd(8).
A default route has to be present in the FIB to be correctly advertised.
!
- Make ospfd(8) and ripd(8) track reject and blackhole routes and allow
them to be redistributed even if pointing to 127.0.0.1.
!
- Allow to specify an alternate control socket for ospfd(8).
!
- ospfd(8) can now be bound into an alternate routing domain.
!
- Fix ospfd(8) route metric for "redistribute default".
!
- Initial version of ldpctl(8) and ldpd(8), a label distribution protocol
daemon for mpls.
!
- Make dvmrp(8) RDE aware of multicast group members per interface.
!
- Support for pruning in dvmrp(8).
--- 87,182 ----
- Several new/improved drivers for sensors, including:
! - The ips(4) driver now has sensor support, complementing the bio support.
!
- The acpithinkpad(4) driver now has temperature and fan sensor support.
!
- New endrun(4) driver for the EndRun Technologies timedelta sensor.
!
- The fins(4) driver now has support for F71806, F71862 and F71882.
!
- The acpitz(4) driver now shows correct decimals for temperature.
! - Added radeonfb(4) to sparc64, an accelerated framebuffer for
Sun XVR-100 boards.
!
- Added support in re(4) for RTL8103E and RTL8168DP devices.
!
- Added support for BCM5709/BCM5716 devices in the bnx(4) driver.
!
- Added support for ICH10 variants of em(4).
!
- Added support for VIA VX855 chipset in the viapm(4) and pciide(4) drivers.
!
- Added support for Intel SCH IDE to pciide(4).
!
- Added support for the Broadcom HT-1100 chipset in the piixpm(4) driver.
!
- Added support for 82574L based devices in the em(4) driver.
!
- A number of network drivers including ix(4), sis(4), msk(4), bnx(4), and vr(4) now
use MCLGETI(9) to reduce memory usage and increase performance under load
and attack.
!
- Added support for VIA CX800 south bridge to the viapm(4) driver.
!
- Added support in em(4) for the newer 82575 (and maybe 82576) chips.
!
- zyd(4) now supports devices with Airoha AL2230S radios.
!
- zyd(4) now works on big-endian machines
!
- urtw(4) now supports RTL8187B based devices.
!
- New otus(4) driver for Atheros AR9001U USB 802.11a/b/g/Draft-N
wireless devices.
!
- New berkwdt(4) driver for Berkshire Products PCI watchdog timers.
!
- New udl(4) driver for USB video devices.
!
- Support for a variety of newer models in bge(4).
!
- Initial version of vsw(4), a driver for the virtual network switch on
sun4v sparc64s.
!
- Implemented machfb(4), an accelerated driver for the sparc64 PGX/PGX64
framebuffers.
!
- Added a vcc(4) and vcctty(4) driver for the "Virtual Console Concentrator"
found on the control domain of sun4v systems.
!
- Implemented 64-bit FIFO modes for ciss(4) devices.
!
- Enable hardware VLAN tagging/stripping on ix(4).
!
- Added basic support for Envy24HT chips in the envy(4) driver.
!
- Many improvements and updates to the isp(4) driver.
!
- Added support for 88E8057-based Yukon 2 Ultra 2-devices in msk(4).
!
- The ips(4) driver now works reliably.
!
- Added raptor(4), an accelerated framebuffer driver for the Tech Source
Raptor GFX cards on the sparc64 platform.
!
- Enabled schsio(4) on i386 and amd64 and added watchdog timer support.
!
- New acpivideo(4) driver for ACPI display switching and brightness control.
New tools:
! - Added smtpd(8), a new privilege-separated SMTP daemon.
!
- Imported the tmux(1) terminal multiplexer, replacing window(1).
!
pf(4) improvements:
! - Enabled pf(4) by default in the rc.conf(8).
!
- Removed pf(4) scrub rules, and only do one kind of packet reassembly.
Rulesets with scrub rules need to be modified because of this.
- Regular rules can now have per-rule scrub options.
- Added new "match" keyword which only applies rule options but does
not change the current pass/block state.
!
- Make all pf(4) operations transactional to improve atomicity of reloads.
!
- Stricter pf(4) checking for ICMP and ICMPv6 packets.
!
- Various improvements to pfsync(4) to lower sync traffic bandwidth and
optionally allow active-active firewall setups.
!
- Fix pf(4) scrub max-mss for IPv6 traffic.
OpenBGPD, OpenOSPFD and other routing daemon improvements:
! - In bgpd(8), rework most of the RDE to allow multiple RIBs.
It is possible to filter per-RIB and attach neighbors to a specific RIB.
!
- Added an option to bgpd(8) to change the "connect-retry" timer.
!
- Allow bgpd.conf(5) and bgpctl(8) to contain 32-bit ASN numbers written in
ASPLAIN format.
!
- Fix bgpd(8) to correctly encode MP unreachable NLRI so IPv6 prefixes get
removed correctly.
!
- Changed the behaviour of "redistribute default" for ospfd(8) and ripd(8).
A default route has to be present in the FIB to be correctly advertised.
!
- Make ospfd(8) and ripd(8) track reject and blackhole routes and allow
them to be redistributed even if pointing to 127.0.0.1.
!
- Allow to specify an alternate control socket for ospfd(8).
!
- ospfd(8) can now be bound into an alternate routing domain.
!
- Fix ospfd(8) route metric for "redistribute default".
!
- Initial version of ldpctl(8) and ldpd(8), a label distribution protocol
daemon for mpls.
!
- Make dvmrp(8) RDE aware of multicast group members per interface.
!
- Support for pruning in dvmrp(8).
***************
*** 184,204 ****
- Support for virtual routing and firewalling with the addition of routing
domains.
!
- Add code in ifconfig(8) to bind an interface to a routing domain.
!
- Add support to ping(8), traceroute(8), arp(8), nc(1) and telnet(1) to
specify which routing domain to use.
!
- Allow ifconfig(8) to turn off IPv6 completely for an interface and
make rtsold(8) turn on inet6 on the interface.
- Routes track the interface link state.
!
- route(8) flush accepts "-iface" or "-priority" to only flush routes
matching these conditions.
- Multiple dhclients can now coexist without causing mayhem.
- Make wireless interfaces have an interface priority of 4 by default.
Makes them less preferred then wired interfaces.
- Do not accept IPv4 ICMP redirects by default.
!
- Added the MAC address to the log entries in dhclient(8).
!
- Make systat(1) show interface description names in the interface view, and add new NFS server and client views.
!
- Make tun(4) emulate link state depending on the open and close of the
device fd.
- Use pf state-table information to speed up decision on whether a packet
is to be delivered locally or forwarded.
--- 184,204 ----
- Support for virtual routing and firewalling with the addition of routing
domains.
!
- Add code in ifconfig(8) to bind an interface to a routing domain.
!
- Add support to ping(8), traceroute(8), arp(8), nc(1) and telnet(1) to
specify which routing domain to use.
!
- Allow ifconfig(8) to turn off IPv6 completely for an interface and
make rtsold(8) turn on inet6 on the interface.
- Routes track the interface link state.
!
- route(8) flush accepts "-iface" or "-priority" to only flush routes
matching these conditions.
- Multiple dhclients can now coexist without causing mayhem.
- Make wireless interfaces have an interface priority of 4 by default.
Makes them less preferred then wired interfaces.
- Do not accept IPv4 ICMP redirects by default.
!
- Added the MAC address to the log entries in dhclient(8).
!
- Make systat(1) show interface description names in the interface view, and add new NFS server and client views.
!
- Make tun(4) emulate link state depending on the open and close of the
device fd.
- Use pf state-table information to speed up decision on whether a packet
is to be delivered locally or forwarded.
***************
*** 209,215 ****
- Install/Upgrade process changes:
! - New disklabel(8) automatic partition allocator with a variety of
smart heuristics.
- The installer has been nearly rewritten mostly with a focus on
simplifying installation.
--- 209,215 ----
- Install/Upgrade process changes:
! - New disklabel(8) automatic partition allocator with a variety of
smart heuristics.
- The installer has been nearly rewritten mostly with a focus on
simplifying installation.
***************
*** 363,371 ****
To make a boot floppy under MS-DOS, use the "rawrite" utility located
at CD1:4.6/tools/rawrite.exe. To make the boot floppy under a Unix OS,
use the
! dd(1)
utility. The following is an example usage of
! dd(1),
where the device could be "floppy", "rfd0c", or
"rfd0a".
--- 363,371 ----
To make a boot floppy under MS-DOS, use the "rawrite" utility located
at CD1:4.6/tools/rawrite.exe. To make the boot floppy under a Unix OS,
use the
! dd(1)
utility. The following is an example usage of
! dd(1),
where the device could be "floppy", "rfd0c", or
"rfd0a".
***************
*** 646,652 ****
OpenBSD ports system.
The ports/ directory represents a CVS (see the manpage for
!
cvs(1) if
you aren't familiar with CVS) checkout of our ports. As with our complete
source tree, our ports tree is available via anoncvs. So, in
--- 646,652 ----
OpenBSD ports system.
The ports/ directory represents a CVS (see the manpage for
!
cvs(1) if
you aren't familiar with CVS) checkout of our ports. As with our complete
source tree, our ports tree is available via anoncvs. So, in