=================================================================== RCS file: /cvsrepo/anoncvs/cvs/www/46.html,v retrieving revision 1.30 retrieving revision 1.31 diff -c -r1.30 -r1.31 *** www/46.html 2016/03/21 05:46:19 1.30 --- www/46.html 2016/03/22 10:54:42 1.31 *************** *** 87,182 ****

Several new/improved drivers for sensors, including:
- The ips(4) driver now has sensor support, complementing the bio support. !
- The acpithinkpad(4) driver now has temperature and fan sensor support. !
- New endrun(4) driver for the EndRun Technologies timedelta sensor. !
- The fins(4) driver now has support for F71806, F71862 and F71882. !
- The acpitz(4) driver now shows correct decimals for temperature.
!
Added radeonfb(4) to sparc64, an accelerated framebuffer for Sun XVR-100 boards. !
Added support in re(4) for RTL8103E and RTL8168DP devices. !
Added support for BCM5709/BCM5716 devices in the bnx(4) driver. !
Added support for ICH10 variants of em(4). !
Added support for VIA VX855 chipset in the viapm(4) and pciide(4) drivers. !
Added support for Intel SCH IDE to pciide(4). !
Added support for the Broadcom HT-1100 chipset in the piixpm(4) driver. !
Added support for 82574L based devices in the em(4) driver. !
A number of network drivers including ix(4), sis(4), msk(4), bnx(4), and vr(4) now use MCLGETI(9) to reduce memory usage and increase performance under load and attack. !
Added support for VIA CX800 south bridge to the viapm(4) driver. !
Added support in em(4) for the newer 82575 (and maybe 82576) chips. !
zyd(4) now supports devices with Airoha AL2230S radios. !
zyd(4) now works on big-endian machines !
urtw(4) now supports RTL8187B based devices. !
New otus(4) driver for Atheros AR9001U USB 802.11a/b/g/Draft-N wireless devices. !
New berkwdt(4) driver for Berkshire Products PCI watchdog timers. !
New udl(4) driver for USB video devices. !
Support for a variety of newer models in bge(4). !
Initial version of vsw(4), a driver for the virtual network switch on sun4v sparc64s. !
Implemented machfb(4), an accelerated driver for the sparc64 PGX/PGX64 framebuffers. !
Added a vcc(4) and vcctty(4) driver for the "Virtual Console Concentrator" found on the control domain of sun4v systems. !
Implemented 64-bit FIFO modes for ciss(4) devices. !
Enable hardware VLAN tagging/stripping on ix(4). !
Added basic support for Envy24HT chips in the envy(4) driver. !
Many improvements and updates to the isp(4) driver. !
Added support for 88E8057-based Yukon 2 Ultra 2-devices in msk(4). !
The ips(4) driver now works reliably. !
Added raptor(4), an accelerated framebuffer driver for the Tech Source Raptor GFX cards on the sparc64 platform. !
Enabled schsio(4) on i386 and amd64 and added watchdog timer support. !
New acpivideo(4) driver for ACPI display switching and brightness control.

New tools:

Added smtpd(8), a new privilege-separated SMTP daemon. !
Imported the tmux(1) terminal multiplexer, replacing window(1).

pf(4) improvements:

Enabled pf(4) by default in the rc.conf(8). !
Removed pf(4) scrub rules, and only do one kind of packet reassembly. Rulesets with scrub rules need to be modified because of this.
Regular rules can now have per-rule scrub options.
Added new "match" keyword which only applies rule options but does not change the current pass/block state. !
Make all pf(4) operations transactional to improve atomicity of reloads. !
Stricter pf(4) checking for ICMP and ICMPv6 packets. !
Various improvements to pfsync(4) to lower sync traffic bandwidth and optionally allow active-active firewall setups. !
Fix pf(4) scrub max-mss for IPv6 traffic.

OpenBGPD, OpenOSPFD and other routing daemon improvements:

In bgpd(8), rework most of the RDE to allow multiple RIBs. It is possible to filter per-RIB and attach neighbors to a specific RIB. !
Added an option to bgpd(8) to change the "connect-retry" timer. !
Allow bgpd.conf(5) and bgpctl(8) to contain 32-bit ASN numbers written in ASPLAIN format. !
Fix bgpd(8) to correctly encode MP unreachable NLRI so IPv6 prefixes get removed correctly. !
Changed the behaviour of "redistribute default" for ospfd(8) and ripd(8). A default route has to be present in the FIB to be correctly advertised. !
Make ospfd(8) and ripd(8) track reject and blackhole routes and allow them to be redistributed even if pointing to 127.0.0.1. !
Allow to specify an alternate control socket for ospfd(8). !
ospfd(8) can now be bound into an alternate routing domain. !
Fix ospfd(8) route metric for "redistribute default". !
Initial version of ldpctl(8) and ldpd(8), a label distribution protocol daemon for mpls. !
Make dvmrp(8) RDE aware of multicast group members per interface. !
Support for pruning in dvmrp(8).

--- 87,182 ----

Several new/improved drivers for sensors, including:
- The ips(4) driver now has sensor support, complementing the bio support. !
- The acpithinkpad(4) driver now has temperature and fan sensor support. !
- New endrun(4) driver for the EndRun Technologies timedelta sensor. !
- The fins(4) driver now has support for F71806, F71862 and F71882. !
- The acpitz(4) driver now shows correct decimals for temperature.
!
Added radeonfb(4) to sparc64, an accelerated framebuffer for Sun XVR-100 boards. !
Added support in re(4) for RTL8103E and RTL8168DP devices. !
Added support for BCM5709/BCM5716 devices in the bnx(4) driver. !
Added support for ICH10 variants of em(4). !
Added support for VIA VX855 chipset in the viapm(4) and pciide(4) drivers. !
Added support for Intel SCH IDE to pciide(4). !
Added support for the Broadcom HT-1100 chipset in the piixpm(4) driver. !
Added support for 82574L based devices in the em(4) driver. !
A number of network drivers including ix(4), sis(4), msk(4), bnx(4), and vr(4) now use MCLGETI(9) to reduce memory usage and increase performance under load and attack. !
Added support for VIA CX800 south bridge to the viapm(4) driver. !
Added support in em(4) for the newer 82575 (and maybe 82576) chips. !
zyd(4) now supports devices with Airoha AL2230S radios. !
zyd(4) now works on big-endian machines !
urtw(4) now supports RTL8187B based devices. !
New otus(4) driver for Atheros AR9001U USB 802.11a/b/g/Draft-N wireless devices. !
New berkwdt(4) driver for Berkshire Products PCI watchdog timers. !
New udl(4) driver for USB video devices. !
Support for a variety of newer models in bge(4). !
Initial version of vsw(4), a driver for the virtual network switch on sun4v sparc64s. !
Implemented machfb(4), an accelerated driver for the sparc64 PGX/PGX64 framebuffers. !
Added a vcc(4) and vcctty(4) driver for the "Virtual Console Concentrator" found on the control domain of sun4v systems. !
Implemented 64-bit FIFO modes for ciss(4) devices. !
Enable hardware VLAN tagging/stripping on ix(4). !
Added basic support for Envy24HT chips in the envy(4) driver. !
Many improvements and updates to the isp(4) driver. !
Added support for 88E8057-based Yukon 2 Ultra 2-devices in msk(4). !
The ips(4) driver now works reliably. !
Added raptor(4), an accelerated framebuffer driver for the Tech Source Raptor GFX cards on the sparc64 platform. !
Enabled schsio(4) on i386 and amd64 and added watchdog timer support. !
New acpivideo(4) driver for ACPI display switching and brightness control.

New tools:

Added smtpd(8), a new privilege-separated SMTP daemon. !
Imported the tmux(1) terminal multiplexer, replacing window(1).

pf(4) improvements:

Enabled pf(4) by default in the rc.conf(8). !
Removed pf(4) scrub rules, and only do one kind of packet reassembly. Rulesets with scrub rules need to be modified because of this.
Regular rules can now have per-rule scrub options.
Added new "match" keyword which only applies rule options but does not change the current pass/block state. !
Make all pf(4) operations transactional to improve atomicity of reloads. !
Stricter pf(4) checking for ICMP and ICMPv6 packets. !
Various improvements to pfsync(4) to lower sync traffic bandwidth and optionally allow active-active firewall setups. !
Fix pf(4) scrub max-mss for IPv6 traffic.

OpenBGPD, OpenOSPFD and other routing daemon improvements:

In bgpd(8), rework most of the RDE to allow multiple RIBs. It is possible to filter per-RIB and attach neighbors to a specific RIB. !
Added an option to bgpd(8) to change the "connect-retry" timer. !
Allow bgpd.conf(5) and bgpctl(8) to contain 32-bit ASN numbers written in ASPLAIN format. !
Fix bgpd(8) to correctly encode MP unreachable NLRI so IPv6 prefixes get removed correctly. !
Changed the behaviour of "redistribute default" for ospfd(8) and ripd(8). A default route has to be present in the FIB to be correctly advertised. !
Make ospfd(8) and ripd(8) track reject and blackhole routes and allow them to be redistributed even if pointing to 127.0.0.1. !
Allow to specify an alternate control socket for ospfd(8). !
ospfd(8) can now be bound into an alternate routing domain. !
Fix ospfd(8) route metric for "redistribute default". !
Initial version of ldpctl(8) and ldpd(8), a label distribution protocol daemon for mpls. !
Make dvmrp(8) RDE aware of multicast group members per interface. !
Support for pruning in dvmrp(8).

*************** *** 184,204 ****

Support for virtual routing and firewalling with the addition of routing domains. !
Add code in ifconfig(8) to bind an interface to a routing domain. !
Add support to ping(8), traceroute(8), arp(8), nc(1) and telnet(1) to specify which routing domain to use. !
Allow ifconfig(8) to turn off IPv6 completely for an interface and make rtsold(8) turn on inet6 on the interface.
Routes track the interface link state. !
route(8) flush accepts "-iface" or "-priority" to only flush routes matching these conditions.
Multiple dhclients can now coexist without causing mayhem.
Make wireless interfaces have an interface priority of 4 by default. Makes them less preferred then wired interfaces.
Do not accept IPv4 ICMP redirects by default. !
Added the MAC address to the log entries in dhclient(8). !
Make systat(1) show interface description names in the interface view, and add new NFS server and client views. !
Make tun(4) emulate link state depending on the open and close of the device fd.
Use pf state-table information to speed up decision on whether a packet is to be delivered locally or forwarded. --- 184,204 ----
- Support for virtual routing and firewalling with the addition of routing domains. !
- Add code in ifconfig(8) to bind an interface to a routing domain. !
- Add support to ping(8), traceroute(8), arp(8), nc(1) and telnet(1) to specify which routing domain to use. !
- Allow ifconfig(8) to turn off IPv6 completely for an interface and make rtsold(8) turn on inet6 on the interface.
- Routes track the interface link state. !
- route(8) flush accepts "-iface" or "-priority" to only flush routes matching these conditions.
- Multiple dhclients can now coexist without causing mayhem.
- Make wireless interfaces have an interface priority of 4 by default. Makes them less preferred then wired interfaces.
- Do not accept IPv4 ICMP redirects by default. !
- Added the MAC address to the log entries in dhclient(8). !
- Make systat(1) show interface description names in the interface view, and add new NFS server and client views. !
- Make tun(4) emulate link state depending on the open and close of the device fd.
- Use pf state-table information to speed up decision on whether a packet is to be delivered locally or forwarded. *************** *** 209,215 ****
- Install/Upgrade process changes:
  - New disklabel(8) automatic partition allocator with a variety of smart heuristics.
  - The installer has been nearly rewritten mostly with a focus on simplifying installation. --- 209,215 ----
  - Install/Upgrade process changes:
    - New disklabel(8) automatic partition allocator with a variety of smart heuristics.
    - The installer has been nearly rewritten mostly with a focus on simplifying installation. *************** *** 363,371 **** To make a boot floppy under MS-DOS, use the "rawrite" utility located at CD1:4.6/tools/rawrite.exe. To make the boot floppy under a Unix OS, use the ! dd(1) utility. The following is an example usage of ! dd(1), where the device could be "floppy", "rfd0c", or "rfd0a". --- 363,371 ---- To make a boot floppy under MS-DOS, use the "rawrite" utility located at CD1:4.6/tools/rawrite.exe. To make the boot floppy under a Unix OS, use the ! dd(1) utility. The following is an example usage of ! dd(1), where the device could be "floppy", "rfd0c", or "rfd0a". *************** *** 646,652 **** OpenBSD ports system.
      The ports/ directory represents a CVS (see the manpage for ! cvs(1) if you aren't familiar with CVS) checkout of our ports. As with our complete source tree, our ports tree is available via anoncvs. So, in --- 646,652 ---- OpenBSD ports system.
      The ports/ directory represents a CVS (see the manpage for ! cvs(1) if you aren't familiar with CVS) checkout of our ports. As with our complete source tree, our ports tree is available via anoncvs. So, in