===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/47.html,v
retrieving revision 1.75
retrieving revision 1.76
diff -u -r1.75 -r1.76
--- www/47.html 2015/08/06 21:50:20 1.75
+++ www/47.html 2016/03/21 05:46:19 1.76
@@ -96,99 +96,99 @@
- Revamped SCSI midlayer and improved driver support.
- UDF 2.5 and 2.6 (HDDVD and Blu-ray) disks support.
-
- Added mpath(4),
+
- Added mpath(4),
a driver that steals paths to scsi devices if they could be
available via multiple paths and then made available
- via mpath(4).
-
- New aibs(4)
+ via mpath(4).
+
- New aibs(4)
driver for ASUSTeK AI Booster hardware monitoring.
-
- New uthum(4)
+
- New uthum(4)
driver for the TEMPerHUM USB temperature and humidity sensors.
-
- New utrh(4)
+
- New utrh(4)
driver for USBRH temperature and humidity sensors.
-
- New uyurex(4)
+
- New uyurex(4)
driver for the Maywa-denki & KAYAC YUREX twitch/jiggle of knee sensor.
-
- New urndis(4)
+
- New urndis(4)
driver for remote NDIS Ethernet over USB devices (phones).
-
- New xf86-video-wsudl(4)
+
- New xf86-video-wsudl(4)
Xorg driver for USB DisplayLink devices supported by
- udl(4).
-
- New mpii(4)
+ udl(4).
+
- New mpii(4)
driver for LSI Logic Fusion MPT Message Passing Interface II based SAS 2 controllers.
-
- New athn(4)
+
- New athn(4)
driver for Atheros IEEE 802.11a/g/n wireless network devices.
-
- New alc(4)
+
- New alc(4)
driver for Atheros AR8131/AR8132 10/100/Gigabit Ethernet devices.
-
- New lisa(4)
+
- New lisa(4)
driver for STMicroelectronics LIS331DL MEMS motion sensors.
-
- New gcu(4)
+
- New gcu(4)
driver for Intel EP80579 Global Configuration Unit.
-
- New lom(4)
+
- New lom(4)
driver for LOMLite and LOMLite2 as found on many of Sun's UltraSPARC-IIi
servers.
-
- New vsw(4)
+
- New vsw(4)
driver for virtual switches on sun4v machines.
-
- New vds(4)
+
- New vds(4)
driver for virtual disk servers on sun4v machines.
- Support for EP80579 integrated Ethernet and ICH9 M V has been added to
- em(4).
+ em(4).
- Support for 82599 and SFP+ 82598 devices has been added to
- ix(4).
+ ix(4).
- Support for the Sun GigabitEthernet SBus Adapter 1.0/1.1 has been added
- to ti(4).
+ to ti(4).
- Support for SBus variants of the QLogic Fibre Channel host adapters has
- been added to isp(4).
+ been added to isp(4).
- Support for SBus variants of the Sun Gigabit Ethernet has
- been added to gem(4).
+ been added to gem(4).
- Support for Intel WiFi Link 1000 and Intel Centrino Advanced-N 6200/Ultimate-N 6300
- has been added to iwn(4).
+ has been added to iwn(4).
- Support for Ralink RT3572 based 802.11n devices
- has been added to run(4).
+ has been added to run(4).
- VIA Tremor 5.1, M-Audio Revolution 5.1 cards
- has been added to envy(4).
-
- New uhts(4)
+ has been added to envy(4).
+
- New uhts(4)
driver for USB HID touchscreens.
- Improved touchscreen support in
- the xf86-input-ws(4)
+ the xf86-input-ws(4)
Xorg driver and improved calibration using the new device
properties from Xinput.
- Support for ON CAT6095 and ON CAT34TS02 temperature sensors added to
- sdtemp(4).
+ sdtemp(4).
- Several improvements and bug fixes to existing Ethernet
drivers, including
- em(4),
- re(4),
- ti(4)
- and vge(4).
+ em(4),
+ re(4),
+ ti(4)
+ and vge(4).
- Support for the PIC PCI-X controller added to the SGI
- xbridge(4) driver.
+ xbridge(4) driver.
- Support for the onboard Fast Ethernet interface found on SGI Octane and
many SGI Origin family systems,
- iec(4).
+ iec(4).
- Support for more SGI input and video devices on Octane and Origin systems, with
- iockbc(4),
- impact(4),
- and odyssey(4).
+ iockbc(4),
+ impact(4),
+ and odyssey(4).
- Improved PCI resource allocation; more hardware left unconfigured by
the machine's firmware (including hotplugged hardware) should work now.
- Support for recording/full-duplex added to
- mavb(4).
+ mavb(4).
- Improved support for USB audio devices in
- uaudio(4).
+ uaudio(4).
- Improved support for
- bwi(4) devices on strict-alignment architectures like armish.
+ bwi(4) devices on strict-alignment architectures like armish.
- Eliminate usage of SCSI tagged queueing mechanisms other than simple queuing, thus avoiding incorrect implementations on various disk devices.
-
- Eliminate spurious dhclient(8) error messages when the specified interface does not exist.
-
- Eliminate spurious softraid(4) error messages for removable devices without media.
+
- Eliminate spurious dhclient(8) error messages when the specified interface does not exist.
+
- Eliminate spurious softraid(4) error messages for removable devices without media.
New tools:
- - newfs_ext2fs(8) for creating ext2 filesystems.
-
- mkuboot(8) for creating U-Boot boot loader images.
-
- midicat(1) MIDI server allowing MIDI programs to communicate
-
- POSIX-compliant fuser(1) to identify process IDs holding a file open
+
- newfs_ext2fs(8) for creating ext2 filesystems.
+
- mkuboot(8) for creating U-Boot boot loader images.
+
- midicat(1) MIDI server allowing MIDI programs to communicate
+
- POSIX-compliant fuser(1) to identify process IDs holding a file open
@@ -204,7 +204,7 @@
-
pf(4) improvements:
+pf(4) improvements:
- nat-to, rdr-to, binat-to options replace the nat, rdr and binat
translation rules. See
@@ -215,73 +215,73 @@
pf(4) route-to/reply-to syntax change for more info.
- pf(4) can now translate packets between different routing
domains.
-
- Added -S and -L options to pfctl(8) to store and load pf state table from a file.
+
- Added -S and -L options to pfctl(8) to store and load pf state table from a file.
- Added support for IPV4 and IPv6 divert sockets.
OpenBGPD, OpenOSPFD and other routing daemon improvements:
- - Update capability code in bgpd(8) to follow RFC 5492.
+
- Update capability code in bgpd(8) to follow RFC 5492.
- BGP MPLS VPN (RFC 4364) support added to the bgpd RIB.
-
- In bgpd(8), implement the RFC4486 BGP Cease Notification Message subcodes.
+
- In bgpd(8), implement the RFC4486 BGP Cease Notification Message subcodes.
- It is now possible to enable/disable specific BGP capabilities.
-
- Update bgpctl(8) irrfilter to support IPv6 and 4-byte AS numbers.
+
- Update bgpctl(8) irrfilter to support IPv6 and 4-byte AS numbers.
- Minimal router-dead-time of 1 second and sub-second hello intervals
- added to ospfd(8).
+ added to ospfd(8).
Additionally it is now possible to specify sub-second SPF timers for faster
route fail-over.
-
- ospf6d(8) is now installed by default.
+
- ospf6d(8) is now installed by default.
The RIB can be synced with the kernel routing table now.
Support for AS-ext LSA has been added.
This is still work-in-progress but testing is highly appreciated.
-
- ldpd -- the MPLS label distribution protocol daemon -- is now installed by default. A custom kernel with option MPLS is needed to use it.
+
- ldpd -- the MPLS label distribution protocol daemon -- is now installed by default. A custom kernel with option MPLS is needed to use it.
Generic network stack improvements:
- brconfig is now integrated into
- ifconfig(8)
-
- Added vether(4), a virtual Ethernet device.
+ ifconfig(8)
+
- Added vether(4), a virtual Ethernet device.
- Two bugs in IPsec/HMAC-SHA2 were fixed, resulting in an incompatibility
with the HMAC-SHA-256/384/512 hash algorithms with previous versions of
OpenBSD and other IPsec implementations sharing the bugs.
-
- In dhcpd(8), echo back the Relay Agent Information option if present, and add support for the ipsec-tunnel hardware type.
-
- Make dhcrelay(8) pick up the routing domain from the specified interface and use that rdomain for relaying the packets to the server.
-
- Added support in dhcrelay(8) for RFC3046 "DHCP-over-ipsec".
-
- Make the tcpdump(8) BGP OPEN capability parser RFC 5492 compliant.
-
- Added an exec command to route(8) to run a process and its children in a specified routing domain.
-
- ifconfig(8) now deals with more than 64 alias addresses.
+
- In dhcpd(8), echo back the Relay Agent Information option if present, and add support for the ipsec-tunnel hardware type.
+
- Make dhcrelay(8) pick up the routing domain from the specified interface and use that rdomain for relaying the packets to the server.
+
- Added support in dhcrelay(8) for RFC3046 "DHCP-over-ipsec".
+
- Make the tcpdump(8) BGP OPEN capability parser RFC 5492 compliant.
+
- Added an exec command to route(8) to run a process and its children in a specified routing domain.
+
- ifconfig(8) now deals with more than 64 alias addresses.
- Various fixes to mbuf defragmenting and mbuf chain copying improve reliability.
Assorted improvements:
- - malloc(3)
+
- malloc(3)
now has an S flag to turn on the options that help debugging
and improve security.
-
- Updated terminfo(3)
- database and ncurses(3)
+
- Updated terminfo(3)
+ database and ncurses(3)
library.
-
- Added support for lazy binding in ld.so(1)
+
- Added support for lazy binding in ld.so(1)
on hppa.
- Added POSIX silent check option (-C) to
-sort(1).
+sort(1).
- Added POSIX extended regular expression support to
-sed(1) (-E option).
+sed(1) (-E option).
- Added GNU-compatible macro prefix option (-P) to
-m4(1).
-
- Make it possible to specify a port in resolv.conf(5).
-
- Improved FILE locking support in stdio(3).
-
- Added SO_SNDTIMEO and SO_RCVTIMEO support in pthreads(3).
-
- cdio(1) no longer prints bogus information if no TOC is found on the disk.
-
- New -v flag causes cdio(1) to print profile and feature information.
-
- whois(1) no longer attempts to keep the memory of 6Bone alive.
-
- Added per-application MIDI-controlled volume knob to aucat(1)
-
- Added MMC and MTC support to aucat(1) making possible MIDI-to-audio synchronization
-
- Added mio_open(3) interface to access hardware and software MIDI ports
+m4(1).
+
- Make it possible to specify a port in resolv.conf(5).
+
- Improved FILE locking support in stdio(3).
+
- Added SO_SNDTIMEO and SO_RCVTIMEO support in pthreads(3).
+
- cdio(1) no longer prints bogus information if no TOC is found on the disk.
+
- New -v flag causes cdio(1) to print profile and feature information.
+
- whois(1) no longer attempts to keep the memory of 6Bone alive.
+
- Added per-application MIDI-controlled volume knob to aucat(1)
+
- Added MMC and MTC support to aucat(1) making possible MIDI-to-audio synchronization
+
- Added mio_open(3) interface to access hardware and software MIDI ports
- Many memory leaks found by parfait and eliminated.
- Make handling of floppy disk disklabels more reliable by properly
initializing starting label.
@@ -313,24 +313,24 @@
- Add support for certificate authentication of users and hosts using
a new, minimal OpenSSH certificate format (not X.509).
- Added a 'netcat mode' to
- ssh(1).
+ ssh(1).
- Add the ability to revoke keys in
- sshd(8)
+ sshd(8)
and
- ssh(1).
+ ssh(1).
- Rewrite the
- ssh(1)
+ ssh(1)
multiplexing support to support non-blocking operation of the mux
master.
- Add a 'read-only' mode to
- sftp-server(8)
+ sftp-server(8)
that disables open in write mode and all other fs-modifying
protocol methods. (bz#430)
- Allow setting an explicit umask on the
- sftp-server(8)
+ sftp-server(8)
commandline to override whatever default the user has. (bz#1229)
- Many improvements to the
- sftp(1)
+ sftp(1)
client.
- New RSA keys will be generated with a public exponent of 65537
instead of the previous value 35.
@@ -346,7 +346,7 @@
existence of the user's shell inside the chroot and not outside.
(bz#1679)
- Cache user and group name lookups in sftp-server using
- user_from_[ug]id(3)
+ user_from_[ug]id(3)
to improve performance on hosts where these operations are slow.
(bz#1495)
- Fix problem that prevented passphrase reading from being
@@ -362,33 +362,33 @@
log the reason why the open failed to debug. (bz#1693)
- Document that the PubkeyAuthentication directive is
allowed in a
- sshd_config(5)
+ sshd_config(5)
Match block. (bz#1577)
- When converting keys, truncate key comments at 72 chars as per
RFC4716. (bz#1630)
- Do not allow logins if /etc/nologin exists but is not
readable by the user logging in.
- Output a debug log if
- sshd(8)
+ sshd(8)
can't open an existing authorized_keys. (bz#1694)
- Quell
- tc[gs]etattr(3)
+ tc[gs]etattr(3)
warnings when forcing a tty (ssh -tt), since we usually don't
actually have a tty to read/set. (bz#1686)
- Prevent
- sftp(1)
+ sftp(1)
from crashing when given a "-" without a command; also, allow
whitespace to follow a "-". (bz#1691)
- After
- sshd(8)
+ sshd(8)
receives a SIGHUP, ignore subsequent HUPs while
- sshd(8)
+ sshd(8)
re-execs itself; prevents two HUPs in quick succession from
resulting in
- sshd(8)
+ sshd(8)
dying. (bz#1692)
- Clarify in
- sshd_config(5)
+ sshd_config(5)
that StrictModes does not apply to
ChrootDirectory; permissions and ownership are always
checked when chrooting. (bz#1532)
@@ -401,7 +401,7 @@
with ForceCommand=internal-sftp with a shell session.
(bz#1606)
- Warn but do not fail if
- stat(2)ing
+ stat(2)ing
the subsystem binary fails. (bz#1599)
- Change "Connecting to host..." message to "Connected to host."
and delay it until after the sftp protocol connection has been
@@ -410,28 +410,28 @@
on the commandline when prompting for passwords. (bz#1039)
- Correct off-by-one in percent_expand(). (bz#1607)
- Fix passing of empty options from
- scp(1)
+ scp(1)
and
- sftp(1)
+ sftp(1)
to the underlying
- ssh(1);
+ ssh(1);
also add support for the stop option "--".
- Fix an incorrect magic number and typo in PROTOCOL. (bz#1688)
- Don't escape backslashes when displaying the SSH2 banner. (bz#1533)
- Don't unnecessarily dup() the in and out fds for
- sftp-server(8).
+ sftp-server(8).
(bz#1566)
- Force use of the correct hash function for random-art signature
display. (bz#1611)
- Do not fall back to adding keys without constraints when the agent
refuses the constrained add request. (bz#1612)
- Fix a race condition in
- ssh-agent(1)
+ ssh-agent(1)
that could result in a wedged or spinning agent. (bz#1633)
- Flush stdio before exec() to ensure that everything has made it out
before the streams go away. (bz#1596)
- Set FD_CLOEXEC on in/out sockets in
- sshd(8).
+ sshd(8).
(bz#1706)
@@ -579,9 +579,9 @@
To make a boot floppy under MS-DOS, use the "rawrite" utility located
at CD1:4.7/tools/rawrite.exe. To make the boot floppy under a Unix OS,
use the
-dd(1)
+dd(1)
utility. The following is an example usage of
-dd(1),
+dd(1),
where the device could be "floppy", "rfd0c", or
"rfd0a".
@@ -864,7 +864,7 @@
OpenBSD ports system.
The ports/ directory represents a CVS (see the manpage for
-
+
cvs(1) if
you aren't familiar with CVS) checkout of our ports. As with our complete
source tree, our ports tree is available via anoncvs. So, in