=================================================================== RCS file: /cvsrepo/anoncvs/cvs/www/Attic/i386-laptop.html,v retrieving revision 1.110 retrieving revision 1.111 diff -c -r1.110 -r1.111 *** www/Attic/i386-laptop.html 2005/05/06 01:27:26 1.110 --- www/Attic/i386-laptop.html 2005/05/08 15:05:22 1.111 *************** *** 107,129 **** XF86Config - IBM Thinkpad 701C - -

All features including hibernation and APM work. -

- Contact Todd Fries. - - IBM Thinkpad 760 - -

As of OpenBSD 2.6, XFree86 and APM do not work. -
Newer versions of XFree86 support X, and patches are available. -
MWave modem/sound does not work. -
APM has been fixed post-2.6 as well, and patches are forthcoming. -

- Contact Todd Fries. - IBM Thinkpad T23 model 26478NU.

The audio chipset is supported. Wireless 802.11b PRISM 2.5 (USB) is supported, too. -
X (XF4) works fine. More infos (dmesg and XF86Config) - can be found - - here.

Contact Joerg Zinke. Sony Vaio z505n --- 234,250 ---- boot via network or PCMCIA floppy.

The audio chipset is supported. Wireless 802.11b PRISM 2.5 (USB) is supported, too. Contact Joerg Zinke. +

+ + dmesg + ¦ + xorg.conf + ¦ + + more info. + Sony Vaio z505n *************** *** 318,390 **** XF86Config - Toshiba Libretto 50CT - -

APM works but you need to be careful not to use the last - 32meg or so of the disk since that's where the BIOS dumps - the long time hibernation image. You can take a look at - the bios geometry in disklabel to see exactly how many sectors - it wants. Failure to do so will cause filesystem corruption - during suspend. -
The libretto uses a single IRQ for both - sb(4) - and - wss - so the best thing to do is to choose one and disable the other - in the kernel. -
The pcmcia external floppy drive is not currently supported - by OpenBSD, but it can be used during the install. -
Installation can be a bit tricky with only a single pcmcia - slot. The best way to do this is to do a network install. - To do this, load the boot floppy and at the boot prompt, - enter boot -c. When you see the UKC - prompt, unplug the floppy drive, plug in your network card, - and then type exit. The kernel will then probe the network - card and you should be able to do a normal network install. - You may find it necessary to disable the sound devices in - the BIOS in order for the boot floppy to correctly detect - your network card. -
Note that the chips driver was broken in XFree86 4.1 (it - is fixed in XFree86 4.2) and hence the XFree86 that ships - with OpenBSD 3.0 does not work on the libretto. I have - compiled the old XFree86 4.01 chips driver (which does work) - for XFree86 4.1. Just grab - - chips_drv.o and copy it to -
```
- 		/usr/X11R6/lib/modules/drivers/chips_drv.o
- 	
```
- That will make XFree86 4.1 work on the 50CT and 70CT. -

- Contact Todd Miller. -

- - XFree86 4.X - ¦ - XFree86 3.3.X - - - Toshiba Libretto 100CT - -

Most of the information listed in the Libretto 50CT entry - apply to the 100CT as well. -
X11 works in 800x400 mode. There are sample XF86Config files for - both. -

- Contact Todd Miller. -

- - XFree86 4.X - ¦ - XFree86 3.3.X - - Toshiba Satellite 2410S

It's running OpenBSD 3.7-current.
All stuff are working fine (graphics, sound, PCMCIA, APM, ethernet), except infrared and the built-in SD card reader.
There's a bug with certain toshiba laptops and XFree/X.org. Ratio is --- 306,315 ---- XF86Config Toshiba Satellite 2410S
- It's running OpenBSD 3.7-current (April 2005).
- All stuff are working fine (graphics, sound, PCMCIA, APM, ethernet), except infrared and the built-in SD card reader.
- There's a bug with certain toshiba laptops and XFree/X.org. Ratio is *************** *** 404,410 ****
  If your laptop under OpenBSD is not listed above, feel free to mail www@openbsd.org to cure this. ! Please supply as much information as possible, such as:
  - Notebook exact manufacturer, name and model.
  - Latest OpenBSD version known to work on it (must be the latest --- 329,335 ----
    If your laptop under OpenBSD is not listed above, feel free to mail www@openbsd.org to cure this. ! Please supply as much information as possible, such as:
    - Notebook exact manufacturer, name and model.
    - Latest OpenBSD version known to work on it (must be the latest *************** *** 417,421 **** www@openbsd.org
      ! $OpenBSD: i386-laptop.html,v 1.110 2005/05/06 01:27:26 nick Exp $ --- 342,346 ---- www@openbsd.org
      ! $OpenBSD: i386-laptop.html,v 1.111 2005/05/08 15:05:22 nick Exp $