=================================================================== RCS file: /cvsrepo/anoncvs/cvs/www/Attic/i386-laptop.html,v retrieving revision 1.93 retrieving revision 1.94 diff -c -r1.93 -r1.94 *** www/Attic/i386-laptop.html 2005/04/28 01:30:25 1.93 --- www/Attic/i386-laptop.html 2005/04/29 02:38:48 1.94 *************** *** 27,37 ****
Of those that have problems,
Of those that have problems,
XFree86 works (800x600 16bpp).
Sounds works.
Lucent modem does not work.
--- 51,71 ----
It comes with AMD Sempron 2800+. Running OpenBSD 3.7. !
Everything woks fine (mini-PCI slot, VIA S3 Unichrome PRO, VIA ! RhineII-2). !
Here is the ! dmesg. !
Here is the ! xorg.conf file. !
Contact Maxim ! Bourmistrov. !
XFree86 works (800x600 16bpp).
Sounds works.
Lucent modem does not work.
*************** *** 68,74 ****
Sound and winmodem do not work.
Contact Matthias Schmidt <xhr@gmx.net>
Sound and winmodem do not work.
Contact Matthias Schmidt <xhr@gmx.net>
The rest (PCMCIA, Infrared, USB) is untested.
Contact Jan-Uwe Finck.
Integrated xl(4) works fine. Integrated auich(4) works fine.
--- 89,97 ----
The rest (PCMCIA, Infrared, USB) is untested.
Contact Jan-Uwe Finck.
Integrated xl(4) works fine. Integrated auich(4) works fine.
*************** *** 99,106 **** Both PCMCIA slots work.
USB is detected, but untested. It does not appear to work after a suspend.
! An XF4 config file can be found ! here.
Contact Paul Wang.
USB is detected, but untested. It does not appear to work after a suspend.
! Here is an ! XF4 config.
Contact Paul Wang.
! option APM_DISABLE_INTERRUPTS=0!
Hibernation (save to disk) works fine as long as you have a ! Windows partition with enough disk space (a bit more than the ! system memory). Suspend/resume/powerdown all work fine; ! however, doing hibernation while in X Window System (tested in ! XFree86 3.3.6) causes framebuffer corruption and it seems that ! the only way to recover is to exit and restart the X server; ! switching virtual terminals doesn't fix it. It has been ! suggested that switching between different resolutions might ! fix it. XFree86 4.0 fixes that problem, but last I checked did ! not have accelerated support for the driver. The best ! work-around is to switch to text mode before hibernating.
If you enable the external monitor (Fn+F7), XFree86 3.3.6 goes into some weird rainbow pattern and eventually freezes --- 155,174 ---- APM to work at all:
! option APM_DISABLE_INTERRUPTS=0!
Hibernation (save to disk) works fine as long as you have a ! Windows partition with enough disk space (a bit more than the ! system memory). Suspend/resume/powerdown all work fine; ! however, doing hibernation while in X Window System (tested in ! XFree86 3.3.6) causes framebuffer corruption and it seems that ! the only way to recover is to exit and restart the X server; ! switching virtual terminals doesn't fix it. It has been ! suggested that switching between different resolutions might ! fix it. XFree86 4.0 fixes that problem, but last I checked did ! not have accelerated support for the driver. The best ! work-around is to switch to text mode before hibernating.
If you enable the external monitor (Fn+F7), XFree86 3.3.6 goes into some weird rainbow pattern and eventually freezes *************** *** 172,179 **** soundblaster (sb(4)) will attach and work fine. You may have to play with IRQ assignments to get that to work.
! An XF86Config file can be found ! here.Contact Angelos Keromytis.
Contact Angelos Keromytis.
! sysctl -w machdep.allowaperture=2 !! and enter the correct frequency ranges in the Monitor section of XF86Config. Here's a sample working XF86Config.
As of OpenBSD 2.8, everything works fine.
!Here is the fdisk output; the easiest way of getting there is ! to resize the Windows partition (I use PartitionMagic) and move ! it to the end of the disk, then create an OpenBSD partition ! (and ignore the partition resizing fdisk does -- just go ahead ! and create all the filesystems you need with disklabel).
! Starting Ending #: id cyl hd sec - cyl hd sec [ start - size] ------------------------------------------------------------------------- 0: 1C 1023 1 1 - 1023 239 63 [ 42003423 - 20502657] <Unknown ID> --- 225,237 ---- IBM Thinkpad T21
As of OpenBSD 2.8, everything works fine.
!Here is the fdisk output; the easiest way of getting there is ! to resize the Windows partition (I use PartitionMagic) and move ! it to the end of the disk, then create an OpenBSD partition ! (and ignore the partition resizing fdisk does -- just go ahead ! and create all the filesystems you need with disklabel).
! Starting Ending #: id cyl hd sec - cyl hd sec [ start - size] ------------------------------------------------------------------------- 0: 1C 1023 1 1 - 1023 239 63 [ 42003423 - 20502657] <Unknown ID> *************** *** 258,271 **** in your kernel configuration file for APM to work at all:! option APM_DISABLE_INTERRUPTS=0Although the video card is supposed to work with XFree86 3.3.6pl8, I've only managed to get it to work with XFree86 ! 4.0.1 with the patches found ! here (you ! can also find binaries of the driver for OpenBSD 2.8 at the same location). You need to have a kernel with "option INSECURE" and set the securelevel to -1 in /etc/rc.securelevel (so the X server can open /dev/mem and mmap() the BIOS). In --- 266,279 ---- in your kernel configuration file for APM to work at all:
! option APM_DISABLE_INTERRUPTS=0Although the video card is supposed to work with XFree86 3.3.6pl8, I've only managed to get it to work with XFree86 ! 4.0.1 with ! patches ! (you can also find binaries of the driver for OpenBSD 2.8 at the same location). You need to have a kernel with "option INSECURE" and set the securelevel to -1 in /etc/rc.securelevel (so the X server can open /dev/mem and mmap() the BIOS). In *************** *** 277,283 **** need a kernel with the option INSECURE set, just set the machdep.allowaperture sysctl variable to 2, typically in /etc/sysctl.conf, if you have an OpenBSD 2.8 (or later) built ! from sources updated after December 15th 2000.
Note that some models only do 1024x768. Those that do 1400x1050, can also do 1600x1200 using a virtual screen --- 285,291 ---- need a kernel with the option INSECURE set, just set the machdep.allowaperture sysctl variable to 2, typically in /etc/sysctl.conf, if you have an OpenBSD 2.8 (or later) built ! from sources updated after December 15th 2000.
Note that some models only do 1024x768. Those that do 1400x1050, can also do 1600x1200 using a virtual screen *************** *** 289,296 **** display (XFree86 3.3.6 might not be able to cope with this -- it couldn't on the ThinkPad 770Z).
!An XF86Config file for XFree86 4.0 can be found here.
UPDATE Apparently, recent T21s have the ATI Rage 3D Rage Mobility instead. --- 297,304 ---- display (XFree86 3.3.6 might not be able to cope with this -- it couldn't on the ThinkPad 770Z).
!Here is the ! XF86Config for XFree86 4.0.
UPDATE Apparently, recent T21s have the ATI Rage 3D Rage Mobility instead. *************** *** 320,347 **** for out-of-date info on this laptop.
Contact Marco S Hyman.
Problem with some boot floppies: must boot with -c and disable ahc ! or the machine hangs booting. This has not been a problem with ! bootable CDs or the GENERIC kernel.
-Apm mostly works -- suspends OK, doesn't hibernate (needs OS - support). Attempts to hibernate results in nothing more than a - keyboard beep. The audio chipset is supported (auich). Note: - there are 16 different mutes and most of them are set by default. - Best feature: built in 802.11b and fxp ethernet. Wireless - uses PRISM 2.5 ISL3874A(PCI), Firmware 1.0.7 (primary), 1.3.6 - (station).
- -X works (XF4). XF4 config file for OpenBSD can be found - here.
-See http://www.snafu.org/t23/ ! for more info.
Contact Marco S Hyman.
Everything works fine except APM and the built-in --- 328,399 ---- for out-of-date info on this laptop.
Contact Marco S Hyman.
It's running OpenBSD -current. !
If using a boot floppy the system may hang when probing ahc. ! Workaround: boot with -c and disable ahc. ! A GENERIC kernel does not have this issue. !
Apm mostly works -- suspends OK, doesn't hibernate. !
The audio chipset is supported (auich). !
X works (XF4). Here is the ! XF86Config.
See http://www.snafu.org/t23/ ! for more info.
Contact Marco S Hyman.
Nearly all Hardware is supported, except FireWire and WinModem.
+APM is well supported. Suspend mode (apm -s/zzz) works without + problems. Hibernation (suspend to disk) works also fine but + requires a small MS-DOS partition with a hibernation file at the + beginning of the harddisk. You can create this file with tphdisk + from ports. (/usr/ports/sysutils/tphdisk)
+ +X.org works fine. Download an example + config file. + The two extra keys around the cursor block can be configured via + xmodmap.
+Example:
++ xmodmap -e "keycode 233 = Page_Down" + xmodmap -e "keycode 234 = Page_Up" ++ +
The integrated Intel PRO/Wireless 2100 in my X31 (Model 2672-C8G) + works with the ipw(4) driver. But you need to download the unfree + firmware first to get it working. For more details read + man 4 ipw.
+ +I'm planning to replace this card with a ral(4) or an ath(4). + For these cards, no unfree firmware required. To replace it, + I'll have to unlock the bios first because IBM allows only + special IBM wireless cards to be installed. The bios can + be patched with the tpwireless program. + (/usr/ports/misc/tpwireless, use on your own risk!)
+ +The integrated CF-Card reader (really nice!) is supported + as well.
+ +Enhanced SpeedStep is supported. You can adjust the cpu speed + via sysctl. (sysctl hw.setperf)
+ +The on-board fxp(4) and auich(4) are working without problems.
+ +The keys for mute, volume up and volume down are working fine. + No special software is required. If you'd like to get the big + "Access IBM" button to work and have a nice on-screen display, you + can install tpb from ports. (/usr/ports/sysutils/tpb) This works just + fine and you have nice on-screen messages when you change volume and + brightness settings or enable/disable the ThinkLight.
+ +Download the dmesg.
+ +Contact Bernd Ahlers.
+Everything works fine except APM and the built-in *************** *** 363,369 ****
APM: "zzz" suspend works, as does the keyboard suspend. "halt -p" and "apm -S" --- 415,421 ----
APM: "zzz" suspend works, as does the keyboard suspend. "halt -p" and "apm -S" *************** *** 404,411 **** The BIOS Setup, (accessed using F2), has an option to disable the memory stick.
! An XF86Config file suitable for use with XFree86 3.3.X may be ! found here.
Contact Theo de Raadt.
! You can find here a suitable ! XF86Config for XFree86 3.3.X.
Contact Theo de Raadt.
USB does not work.
! An XF86Config file can be found ! here.
Contact Markus Friedl.
USB does not work.
! Here is an XF86Config file.
Contact Markus Friedl.
! The libretto uses a single IRQ for both sb(4) ! and wss so the best thing to do is to choose one and disable the other in the kernel. The pcmcia external floppy drive is not currently supported --- 564,572 ---- it wants. Failure to do so will cause filesystem corruption during suspend.
! The libretto uses a single IRQ for both sb(4) ! and wss so the best thing to do is to choose one and disable the other in the kernel. The pcmcia external floppy drive is not currently supported *************** *** 541,549 **** compiled the old XFree86 4.01 chips driver (which does work) for XFree86 4.1. Just grab ! chips_drv.o and copy it to !
! /usr/X11R6/lib/modules/drivers/chips_drv.oThat will make XFree86 4.1 work on the 50CT and 70CT.
--- 593,601 ---- compiled the old XFree86 4.01 chips driver (which does work) for XFree86 4.1. Just grab ! chips_drv.o and copy it to !
! /usr/X11R6/lib/modules/drivers/chips_drv.oThat will make XFree86 4.1 work on the 50CT and 70CT.
*************** *** 583,600 **** they allow.
Contact Theo de Raadt.
! All stuff tested are working fine (Graphics, Sound, PCMCIA, APM, ethernet). !
Infrared and 56K modem are untested. !
There's a bug with certain toshiba laptops and XFree/X.org. Ratio is ! too quick, and some chars are repeated. To avoid that, disable ! X's ! kbd handling, and load a modmap with xmodmap. A sample Xorg config ! file can be found ! here. !
Contact Alexandre Anriot.
Contact Theo de Raadt.
It's running OpenBSD 3.7-current. !
All stuff are working fine (graphics, sound, PCMCIA, APM, ! ethernet) except Infrared and SD card reader. !
There's a bug with certain toshiba laptops and XFree/X.org. Ratio is ! too quick, and some chars are repeated. To avoid that, disable ! X's ! kbd handling, and load a modmap with xmodmap. !
Here is the ! xorg.conf. ! and the ! dmesg. !
Contact Alexandre Anriot.