Annotation of www/i386-laptop.html, Revision 1.46
1.1 deraadt 1: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML Strict//EN">
2: <html>
3: <head>
4: <title>OpenBSD/i386 Laptop Page</title>
5: <link rev=made href=mailto:www@openbsd.org>
6: <meta name="resource-type" content="document">
1.17 wvdputte 7: <meta name="description" content="OpenBSD laptop">
1.1 deraadt 8: <meta name="keywords" content="openbsd,main">
9: <meta name="distribution" content="global">
10: <meta name="copyright" content="This document copyright 1997,1998 by OpenBSD.">
11: </head>
12:
13: <BODY BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#23238E">
14: <img alt="[OpenBSD]" height=30 width=141 SRC="images/smalltitle.gif">
15: <p>
16: <h2><font color=#e00000>i386 Laptop Status</font><hr></h2>
17:
18: <p>
1.45 chris 19: This is a list of laptops known to be working with OpenBSD 2.8
1.1 deraadt 20:
21: <p>
22: If your laptop isn't listed below that doesn't mean that it isn't working,
1.38 deraadt 23: and you will most likely find a similar model that is listed below. Starting
24: with OpenBSD 2.6, almost all laptops worked very well, with only minimal
1.45 chris 25: issues remaining. Later OpenBSD releases perform even better.
1.38 deraadt 26: <p>
27: Of those that have problems..
1.1 deraadt 28: <ul>
1.5 deraadt 29: <li>Some exhibit problems with APM support. Note that <strong>apm -S</strong>
30: fails to suspend some laptops, but this is not a major concern.
1.38 deraadt 31: <li>Some lack sound support
32: <li>A few have subtle bugs with their PCMCIA and Cardbus support
33: <li>XFree86 does not support some displays properly. Sometimes XFree86 4.x helps.
1.1 deraadt 34: <li>Or some other built-in device doesn't work..
35: <li>Some have problems with pcmcia card eject interrupts.
36: </ul>
37:
38: <p>
39: If you have your laptop working (or not working) and it isn't listed below,
1.45 chris 40: please mail <a href="mailto:www@openbsd.org">www@openbsd.org</a> so that it
1.1 deraadt 41: can be listed. Please supply as much information as possible.
42:
43: <p>
44: APM problem reports should be sent to our APM developers,
45: <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a> and
46: <a href=mailto:weingart@openbsd.org>Tobias Weingartner</a>.
47:
48: <p>
49: <table border=1>
50: <tr>
51: <th>Laptop</th>
52: <th>Notes</th>
53: </tr><tr>
54: <td>
1.15 beck 55: Sony VAIO F430
56: </td><td>
57: As of OpenBSD 2.6-Current (Feb 17/00)<P>
58:
59: APM: "<strong>zzz</strong>" suspend works, as does the keyboard
60: suspend. "<strong>halt -p</strong>" and "<strong>apm -S</strong>"
61: don't. (but I've yet to look for phdisk utilities below - will be
62: investigating shortly.) <P>
63:
64: DVD drive, floppy all function. Ethernet works after wakeup with
65: the card I'm using (3Com 3c589). <P>
66:
67: Contact <a href=mailto:beck@openbsd.org>Bob Beck</a>.
68: </td>
69: </tr><tr>
70: <td>
1.1 deraadt 71: Sony VAIO z505r
72: </td><td>
73: APM support: "<strong>zzz</strong>", suspend via keyboard, hibernation
74: via keyboard, and "<strong>halt -p</strong>" all work.
75: "<strong>apm -S</strong>" wakes up immediately.<p>
76:
77: Hibernation uses a block at the end of the disk, approximately
78: 3-5MB larger than the memory in your machine. To repair hibernation,
79: use "<strong>phdisk.exe /create /partition</strong>" to setup the
80: partition. The phdisk program is available on the boot
81: floppy image provided on the first recovery CD.<p>
82:
1.38 deraadt 83: Built-in ethernet works fine, but occasionally requires reset
84: after suspend using
1.1 deraadt 85: "<strong>ifconfig fxp0 down; ifconfig fxp0 up</strong>".<p>
86:
87: After a suspend, the profiling clock is not running. Patches are
88: being worked on.<p>
89:
1.38 deraadt 90: Sound is supported using the neo(4) device driver. Sometimes upon
91: boot, a hang happens when trying to determine the AC97 mixer type.<p>
1.1 deraadt 92:
93: When the memory stick slot is empty, it can cause errors which overflow
94: the dmesg buffer, and thus confuse the OpenBSD install program.
95: The BIOS Setup, (accessed using F2), has an option to disable the
96: memory stick.<p>
97:
1.19 deraadt 98: An XF86Config file suitable for use with XFree86 3.3.X may be
1.21 markus 99: found <a href="xf86configs/vaioz505r">here</a>.
1.19 deraadt 100: <p>
101:
1.1 deraadt 102: Contact <a href=mailto:deraadt@openbsd.org>Theo de Raadt</a>.
103: </td>
104: </tr><tr>
105: <td>
106: Sony VAIO z505s
107: </td><td>
108: Similar to the VAIO z505r, except that the provided USB floppy has
109: some problems.<p>
110: Contact <a href=mailto:provos@openbsd.org>Niels Provos</a>.
111: </td>
112: </tr><tr>
113: <td>
114: Sony VAIO 747</td>
115: </td><td>
1.33 markus 116: Ever since OpenBSD 2.6, XFree86 and APM do work.<p>
1.2 markus 117:
118: Ships with a PCMCIA modem card (COM One MCC220 Platinium Card), which works.<p>
119:
120: Sound works (8 bit only).<p>
121:
122: APM behaviour similar to the VAIO z505r,
123: except that hibernation has not been tested.<p>
124:
125: USB does not work.<p>
126:
1.21 markus 127: An XF86Config file can be found
128: <a href="xf86configs/vaio747">here</a>.<p>
129:
1.2 markus 130: Contact <a href=mailto:markus@openbsd.org>Markus Friedl</a>.
1.1 deraadt 131: </td>
132: </tr><tr>
133: <td>
134: Sony VAIO PCG 505-FX
135: </td><td>
136: Unknown.
137: </td>
138: </tr><tr>
139: <td>
140: IBM Thinkpad 701C
141: </td><td>
142: All features including hibernation and APM work.<p>
143:
144: Contact <a href=mailto:todd@openbsd.org>Todd Fries</a>.
145: </td>
146: </tr><tr>
147: <td>
148: IBM Thinkpad 770Z
149: </td><td>
1.39 angelos 150: <p>As of OpenBSD 2.8, almost everything works fine.</p>
1.1 deraadt 151:
1.39 angelos 152: <p>This laptop does not really have a BIOS; most of the device
153: settings, like IRQ assignements etc. have to be done through
154: Windows.</p>
155:
156: <p>You can get the serial and infrared ports to be recognized
157: as com* devices by playing with the IRQ assignments in
158: Windows. Likewise for the parallel port (it's lpt2).</p>
159:
160: <p>You will need this line in your kernel configuration file for
161: APM to work at all:</p>
162:
163: <pre>
164: option APM_DISABLE_INTERRUPTS=0
165: </pre>
166:
167: <p>Hibernation (save to disk) works fine as long as you have a
168: Windows partition with enough disk space (a bit more than the
169: system memory). Suspend/resume/powerdown all work fine;
170: however, doing hibernation while in X windows (tested in
171: XFree86 3.3.6) causes framebuffer corruption and it seems that
172: the only way to recover is to exit and restart the X server;
173: switching virtual terminals doesn't fix it. It has been
174: suggested that switching between different resolutions might
175: fix it. XFree86 4.0 fixes that problem, but last I checked did
176: not have accelerated support for the driver. The best
177: work-around is to switch to text mode before hibernating.</p>
178:
179: <p>If you enable the external monitor (Fn+F7), XFree86 3.3.6
180: goes into some weird rainbow pattern and eventually freezes
181: the system (unless you switch to text mode or otherwise kill
182: the server within a few seconds); if you switch to text mode,
183: you have to kill the X server (switching back to graphics mode
184: will cause a crash). Enabling the external monitor while in
185: video mode causes no side effects; you can then start X or
186: switch to it if it's already running.</p>
187:
188: <p>The clcs driver is somewhat flakey, so you're best off
189: disabling it. It doesn't really matter though since the
190: soundblaster (sb) will attach and work fine. You may have to
191: play with IRQ assignments to get that to work.</p>
1.1 deraadt 192:
1.34 nate 193: An XF86Config file can be found
194: <a href="xf86configs/thinkpad770z">here</a>.<p>
1.12 chris 195:
1.1 deraadt 196: Contact <a href=mailto:angelos@openbsd.org>Angelos Keromytis</a>.
197: </td>
198: </tr><tr>
199: <td>
1.43 angelos 200: IBM Thinkpad A21p
201: </td><td>
202: See the entry for the T21. Everything is the same except for
203: the video card, which is an ATI Rage 128 Mobility LF. OpenBSD
204: 2.8 post mid-December with XFree86 4.0.2 works great at
205: 1600x1200 24bpp. You need to:
206: <pre>
207: sysctl -w machdep.allowaperture=2
208: </pre>
209: and enter the correct frequency ranges in the Monitor section
210: of XF86Config. Here's a sample working
211: <a href="xf86configs/thinkpada21p">XF86Config.</a>
212: </td>
213: </tr><tr>
214: <td>
1.39 angelos 215: IBM Thinkpad T21
216: </td><td>
217: <p>As of OpenBSD 2.8, everything works fine.</p>
218:
219: <p>Here is the fdisk output; the easiest way of getting there is
220: to resize the Windows partition (I use PartitionMagic) and move
221: it to the end of the disk, then create an OpenBSD partition
222: (and ignore the partition resizing fdisk does -- just go ahead
223: and create all the filesystems you need with disklabel).</p>
224:
225: <pre>
226: Starting Ending
227: #: id cyl hd sec - cyl hd sec [ start - size]
228: -------------------------------------------------------------------------
229: 0: 1C 1023 1 1 - 1023 239 63 [ 42003423 - 20502657] <Unknown ID>
230: *1: A6 0 1 1 - 1021 239 63 [ 63 - 15452577] OpenBSD
231: 2: 00 0 0 1 - 0 0 0 [ 0 - 0] unused
232: 3: 00 0 0 1 - 0 0 0 [ 0 - 0] unused
233: </pre>
234:
235: <p>To get it to see the serial and infrared ports (both as com*
236: devices), you need to play with the IRQ assignments in the
237: BIOS; just set them to the default values as found in the
238: GENERIC config file. Likewise for the parallel port (OpenBSD
239: can see lpt2). You may have to play with the Windows
240: assignments for this as well.</p>
241:
1.44 angelos 242: <p>There's at least two miniPCI cards available at this point:
243: one is an (unsupported) WinModem, and the other is a combo
244: ethernet/modem card. The ethernet works just fine (detected
245: as an fxp/inphy card); the modem looks like it's a real one,
246: but it's not yet supported.</p>
1.39 angelos 247:
248: <p>Sound (CS4614) works fine. To avoid system freeze when using
1.44 angelos 249: Cardbus and audio simultaneously, you *may* need to set at least
250: two IRQs for use by PCI devices, in the BIOS; I use 9 and 11. It
251: is also necessary to turn off PCI Power Management in the BIOS
252: Power configuration (that's the only menu that scrolls, so make
253: sure you go to the bottom of the page :-)</p>
1.39 angelos 254:
1.41 angelos 255: <p>APM works except for hibernation (requires OS support). To
256: get "halt -p" to work, you must set the sysctl variable
257: machdep.apmhalt to 1 (you need OpenBSD 2.8-current with
258: sources from mid-January, or later). You will need this line
259: in your kernel configuration file for APM to work at all:</p>
1.39 angelos 260:
261: <pre>
262: option APM_DISABLE_INTERRUPTS=0
263: </pre>
264:
265: <p>Although the video card is supposed to work with XFree86
266: 3.3.6pl8, I've only managed to get it to work with XFree86
267: 4.0.1 with the patches found <a
268: href="http://www.probo.com/timr/savagemx.html">here</a> (you
269: can also find binaries of the driver for OpenBSD 2.8 at the
1.40 angelos 270: same location). You need to have a kernel with "option
1.39 angelos 271: INSECURE" and set the securelevel to -1 in /etc/rc.securelevel
272: (so the X server can open /dev/mem and mmap() the BIOS). In
1.46 ! angelos 273: this configuration, it can do 1400x1050 at 16bpp (version 1.1.13
! 274: of the savage driver works fine at 24bpp as well).</p>
1.39 angelos 275:
1.41 angelos 276: <p><b>UPDATE:</b> The above-mentioned patches have been
277: included in XFree86 4.0.2, and work out of the box. You don'
278: need a kernel with the option INSECURE set, just set the
1.40 angelos 279: machdep.allowaperture sysctl variable to 2, typically in
280: /etc/sysctl.conf, if you have an OpenBSD 2.8 (or later) built
281: from sources updated after December 15th 2000.</p>
282:
1.39 angelos 283: <p>Note that some models only do 1024x768. Those that do
284: 1400x1050, can also do 1600x1200 using a virtual screen
285: (wherein the whole display shifts as you go "off-screen"); I
286: have not tested whether that works (it does in Windows).</p>
287:
288: <p>If you close the lid of the laptop, the system suspends;
289: under XFree86 4.0, resuming works fine with respect to the
290: display (XFree86 3.3.6 might not be able to cope with this --
291: it couldn't on the ThinkPad 770Z).</p>
292:
293: <p>An XF86Config file for XFree 4.0 can be found <a
294: href="xf86configs/thinkpadt21">here</a>.</p>
295:
1.40 angelos 296: <p>One annoying thing is when you take out one of the UltraBay
297: 2000 devices; the system starts beeping. The only way to make it
298: stop is to suspend and then plug in a device in the UltraBay (not
299: necessarily the same one). Note that hot-swap of UltraBay 2000
300: devices is not currently supported in OpenBSD (as of 2.8), thus
301: it's only safe to hot-swap batteries.</p>
302:
1.39 angelos 303: <p>Contact <a href=mailto:angelos@openbsd.org>Angelos Keromytis</a>.</p>
304: </td>
305: </tr><tr>
306: <td>
1.1 deraadt 307: IBM Thinkpad 760
308: </td><td>
309: As of OpenBSD 2.6, XFree86 and APM do not work.<p>
310:
311: Newer versions of XFree86 support X, and patches are available.<p>
312:
313: MWave modem/sound does not work.<p>
314:
315: APM has been fixed post-2.6 as well, and patches are forthcoming.<p>
316:
317: Contact <a href=mailto:todd@openbsd.org>Todd Fries</a>.
318: </td>
319: </tr><tr>
320: <td>
1.27 marc 321: IBM Thinkpad T20
322: </td><td>
1.42 marc 323: Running OpenBSD 2.7 (and later) apm mostly works. To
324: get "halt -p" to work, you must set the sysctl variable
325: machdep.apmhalt to 1 (you need OpenBSD 2.8-current with
326: sources from mid-January, or later). The unit goes into
327: suspend mode when top is closed. Restores nicely
1.27 marc 328: when top opened.<p>
329:
330: Built in modem is a winmodem... ignore it. Actually it is on
331: a `mini-pci' card so it can probably be removed.<p>
332:
1.30 marc 333: Audio works, but you have to turn off PCI sleep mode in the BIOS.<p>
1.27 marc 334:
1.36 marc 335: OpenBSD X11 supports this machine as of 2.8, but there is lots
336: of visual noise at 32bpp. Image is fine at 16 bpp.<p>
337:
1.28 marc 338: See <a href="http://www.snafu.org/t20/">http://www.snafu.org/t20/</a>
1.36 marc 339: for more info.<p>
1.28 marc 340:
1.27 marc 341: Contact <a href=mailto:marc@snafu.org>Marco S Hyman</a>.
342: </td>
343: </tr><tr>
344: <td>
1.11 millert 345: Toshiba Libretto 50CT
346: </td><td>
347: APM works but you need to be careful not to use the last
348: 32meg or so of the disk since that's where the BIOS dumps
349: the long time hibernation image. You can take a look at
350: the bios geometry in disklabel to see exactly how many sectors
351: it wants. Failure to do so will cause filesystem corruption
352: during suspend.
353: <p>
354: The libretto uses a single IRQ for both <strong>sb</strong>
355: and <strong>wss</strong> so the best thing to do is to
356: choose one and disable the other in the kernel.
357: The pcmcia external floppy drive is not currently supported
358: by OpenBSD, but it can be used during the install.
359: <p>
360: Installation can be a bit tricky with only a single pcmcia
361: slot. The best way to do this is to do a network install.
362: To do this, load the boot floppy and at the boot prompt,
363: enter <em>boot -c</em>. When you see the <em>UKC</em>
364: prompt, unplug the floppy drive, plug in your network card,
365: and then type exit. The kernel will then probe the network
366: card and you should be able to do a normal network install.
367: You may find it necessary to disable the sound devices in
368: the BIOS in order for the boot floppy to correctly detect
369: your network card.
370: <p>
1.18 millert 371: An XF86Config file suitable for use with XFree86 3.3.X may be
372: found <a href="xf86configs/libretto50ct">here</a>.
373: <p>
1.11 millert 374: Contact <a href=mailto:millert@openbsd.org>Todd Miller</a>.
375: </td>
376: </tr><tr>
377: <td>
1.20 millert 378: Toshiba Libretto 100CT
379: </td><td>
380: Most of the information listed in the Libretto 50CT entry
381: apply to the 100CT as well.
382: <p>
383: X11 works in 800x400 mode. An XF86Config file suitable for
384: use with XFree86 3.3.X may be found
385: <a href="xf86configs/libretto100ct">here</a>.
386: <p>
1.27 marc 387: Contact <a href=mailto:millert@openbsd.org>Todd Miller</a>.
1.20 millert 388: </td>
389: </tr><tr>
390: <td>
1.1 deraadt 391: Toshiba Portege 660CDT
392: </td><td>
393: APM is completely broken.<p>
394:
395: The mixed <strong>sb</strong> and <strong>wss</strong> sound
396: hardware can cause some grief. Newer versions of the flash
397: BIOS are worse, since they are less flexible about what interrupts
398: they allow.<p>
399:
400: Contact <a href=mailto:deraadt@openbsd.org>Theo de Raadt</a>.
401: </td>
402: </tr><tr>
403: <td>
404: Digital HiNote VP735
405: </td><td>
406: APM works fully.<p>
407:
1.23 mickey 408: Everything on the machine works.<p>
1.1 deraadt 409:
1.22 mickey 410: An XF86Config file suitable for use with XFree86 3.3.X may be
411: found <a href="xf86configs/hinotevp700">here</a>.
412: <p>
413:
1.1 deraadt 414: Contact <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a>.
415: </td>
1.3 deraadt 416: </tr><tr>
417: <td>
418: Fujitsu Lifebook C325
419: </td><td>
420: APM works fully.<p>
421:
422: Sound works when the BIOS is told to activate SB emulation mode.
423:
424: Everything else on the machine works.<p>
425:
426: Contact <a href=mailto:tom@knienieder.com>Tom Knienieder</a>.
427: </td>
1.4 deraadt 428: </tr><tr>
429: <td>
1.14 d 430: Fujitsu Stylistic 500
431: </td><td>
432: APM works.<p>
433:
434: Serial port doesn't work.<p>
435:
436: Some tweaks needed for small memory kernel (4Mb).<p>
437:
438: X 'works' (thrashes like crazy). <p>
439:
440: Contact <a href=mailto:d@openbsd.org>David Leonard</a>.
441: </td>
442: </tr><tr>
443: <td>
1.4 deraadt 444: Siemens SCENIC Mobile 360
445: </td><td>
446: APM works fully.<p>
447:
448: Sound works, using OSS.<p>
449:
450: Contact <a href=mailto:b1000@softhome.net>Dan Carlsson</a>.
451: </td>
1.5 deraadt 452: </tr><tr>
453: <td>
454: Dell Inspiron 3200 D233XT (Bios release: A10)
455: </td><td>
456: APM works fully.<p>
457:
458: Suspend (to ram or disk) does not work under X (X server does not
459: restore screen upon resume), but DPMS do (screen is turned off after
460: a while if the machine isn't used). BIOS APM settings (for automatic
461: suspend) interfere with X server, and should be disabled.<p>
462:
463: Suspend to disk needs a DOS (FAT16) partition containing a file named
464: "SAVE2DSK.BIN". This file which is created via Dell tools under
465: Windows 98 (it's present out of factory), is sized (ram size + 2 or 3
466: MB). An ad hoc DOS partition is thus required (it must be the first
467: partition on disk).<p>
468:
469: PCMCIA: works except "live" card ejection or insertion (which lock
470: the machine, a hard reset is required).<p>
471:
472: USB: does not work, if enabled, kernel hangs at boot during USB
473: controller detection.<p>
474:
475: Contact <a href=mailto:b1000@softhome.net>Dan Carlsson</a>.
476: </td>
1.6 ericj 477: </tr><tr>
478: <td>
479: Toshiba Tecra 500CS
480: </td><td>
1.7 brad 481: APM is broken, However it <b>halt -p</b> does work.<p>
1.6 ericj 482:
1.7 brad 483: Sound works by default with the GENERIC kernel, but with the speakers
484: is not really worth it. X runs nicely as well.<p>
1.6 ericj 485:
1.7 brad 486: Contact <a href=mailto:ericj@monkey.org>Eric Jackson</a>.
1.6 ericj 487: </td>
1.7 brad 488: </tr><tr>
489: <td>
490: Toshiba Tecra 500CDT
491: </td><td>
1.14 d 492: APM is completely broken (and can trash your disk).<p>
493:
494: XFree86 works (800x600 16bpp).<p>
1.7 brad 495:
1.14 d 496: Sound works (21739 Hz, half duplex stereo).<p>
1.7 brad 497:
1.14 d 498: <!-- Serial IR is said to work, needs verification. -->
1.7 brad 499:
1.14 d 500: Contact <a href=mailto:brad@openbsd.org>Brad Smith</a>,
501: or <a href=mailto:d@openbsd.org>David Leonard</a>.
1.7 brad 502: </td>
1.10 aaron 503: </tr><tr>
504: <td>
505: Toshiba Tecra 550CDT
506: </td><td>
507: APM deep sleep (<b>zzz</b>) works, but <b>-S</b> wakes up immediately.<p>
508:
509: XFree86 works beautifully.<p>
510:
511: Sound works, after some IRQ tinkering in the BIOS.<p>
512:
513: USB works; at least, I plugged a digital camera in, and the <b>ugen</b> driver detected and configured it.<p>
514:
1.16 aaron 515: The built-in modem does not work since it requires software only available in Windows; that is, it does not implement a true RS232 communication port.<p>
1.10 aaron 516:
517: The pcic is broken in this machine, so I cannot accurately comment on PCMCIA attach/detach.<p>
518:
519: Contact <a href=mailto:aaron@openbsd.org>Aaron Campbell</a>.
520: </td>
1.13 mickey 521: </tr><tr>
522: <td>
523: NEC Versa 2000
524: </td><td>
525: APM works fully.<p>
1.1 deraadt 526:
1.13 mickey 527: Everything on the machine works.<p>
528:
529: Contact <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a>.
530: </td>
1.29 kevlo 531: </tr><tr>
532: <td>
533: Acer TravelMate 345
534: </td><td>
535: As of OpenBSD 2.7-CURRENT, APM works.<p>
536:
537: XFree86 works (800x600 16bpp).<p>
538:
539: Sounds works.<p>
540:
541: Lucent modem does not work.<p>
542:
543: Contact <a href=mailto:kevlo@openbsd.org>Kevin Lo</a>.
1.32 nate 544: </td>
545: </tr><tr>
546: <td>
547: Compaq Armada M700<p>
548: </td><td>
549: APM works correctly, but you cannot suspend while in X. You
550: must suspend from the console.
551:
552: CardBus works.<p>
553:
554: Internal 10/100 Ethernet (for those models that have it).
555: Works beautifully with the fxp driver. <p>
556:
557: No sound support as of now. People are supposedly working on
558: this.<p>
559:
560: No internal modem support as of now. (It's a winmodem.)
561: There is a binary only driver for Linux. There is also the
562: <a href="http://linmodems.org">linmodem project</a> that is
563: trying to make an opensource winmodem driver.<p>
564:
1.35 nate 565: An XF86Config file can be found
566: <a href="xf86configs/armadam700">here</a>.<p>
567:
1.32 nate 568: Contact <a href=mailto:nate@openbsd.org>Nathan Binkert</a>.
1.31 jufi 569: </td></tr>
1.1 deraadt 570: </table>
571:
572: <hr>
573: <a href=plat.html><img height=24 width=24 src=back.gif border=0 alt=OpenBSD></a>
574: <a href=mailto:www@openbsd.org>www@openbsd.org</a>
575: <br>
1.46 ! angelos 576: <small>$OpenBSD: i386-laptop.html,v 1.45 2001/01/31 03:33:06 chris Exp $</small>
1.1 deraadt 577:
578: </body>
579: </html>
![[BACK]](/icons/back.gif){kind=icon}
Return to i386-laptop.html CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / www