Annotation of www/i386-laptop.html, Revision 1.50
1.1 deraadt 1: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML Strict//EN">
2: <html>
3: <head>
4: <title>OpenBSD/i386 Laptop Page</title>
5: <link rev=made href=mailto:www@openbsd.org>
6: <meta name="resource-type" content="document">
1.17 wvdputte 7: <meta name="description" content="OpenBSD laptop">
1.1 deraadt 8: <meta name="keywords" content="openbsd,main">
9: <meta name="distribution" content="global">
10: <meta name="copyright" content="This document copyright 1997,1998 by OpenBSD.">
11: </head>
12:
13: <BODY BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#23238E">
14: <img alt="[OpenBSD]" height=30 width=141 SRC="images/smalltitle.gif">
15: <p>
16: <h2><font color=#e00000>i386 Laptop Status</font><hr></h2>
17:
18: <p>
1.45 chris 19: This is a list of laptops known to be working with OpenBSD 2.8
1.1 deraadt 20:
21: <p>
22: If your laptop isn't listed below that doesn't mean that it isn't working,
1.38 deraadt 23: and you will most likely find a similar model that is listed below. Starting
24: with OpenBSD 2.6, almost all laptops worked very well, with only minimal
1.45 chris 25: issues remaining. Later OpenBSD releases perform even better.
1.38 deraadt 26: <p>
27: Of those that have problems..
1.1 deraadt 28: <ul>
1.5 deraadt 29: <li>Some exhibit problems with APM support. Note that <strong>apm -S</strong>
30: fails to suspend some laptops, but this is not a major concern.
1.38 deraadt 31: <li>Some lack sound support
32: <li>A few have subtle bugs with their PCMCIA and Cardbus support
33: <li>XFree86 does not support some displays properly. Sometimes XFree86 4.x helps.
1.1 deraadt 34: <li>Or some other built-in device doesn't work..
35: <li>Some have problems with pcmcia card eject interrupts.
36: </ul>
37:
38: <p>
39: If you have your laptop working (or not working) and it isn't listed below,
1.45 chris 40: please mail <a href="mailto:www@openbsd.org">www@openbsd.org</a> so that it
1.1 deraadt 41: can be listed. Please supply as much information as possible.
42:
43: <p>
44: APM problem reports should be sent to our APM developers,
45: <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a> and
46: <a href=mailto:weingart@openbsd.org>Tobias Weingartner</a>.
47:
48: <p>
49: <table border=1>
50: <tr>
51: <th>Laptop</th>
52: <th>Notes</th>
53: </tr><tr>
54: <td>
1.15 beck 55: Sony VAIO F430
56: </td><td>
57: As of OpenBSD 2.6-Current (Feb 17/00)<P>
58:
59: APM: "<strong>zzz</strong>" suspend works, as does the keyboard
60: suspend. "<strong>halt -p</strong>" and "<strong>apm -S</strong>"
61: don't. (but I've yet to look for phdisk utilities below - will be
62: investigating shortly.) <P>
63:
64: DVD drive, floppy all function. Ethernet works after wakeup with
65: the card I'm using (3Com 3c589). <P>
66:
67: Contact <a href=mailto:beck@openbsd.org>Bob Beck</a>.
68: </td>
69: </tr><tr>
70: <td>
1.1 deraadt 71: Sony VAIO z505r
72: </td><td>
73: APM support: "<strong>zzz</strong>", suspend via keyboard, hibernation
74: via keyboard, and "<strong>halt -p</strong>" all work.
75: "<strong>apm -S</strong>" wakes up immediately.<p>
76:
77: Hibernation uses a block at the end of the disk, approximately
78: 3-5MB larger than the memory in your machine. To repair hibernation,
79: use "<strong>phdisk.exe /create /partition</strong>" to setup the
80: partition. The phdisk program is available on the boot
81: floppy image provided on the first recovery CD.<p>
82:
1.38 deraadt 83: Built-in ethernet works fine, but occasionally requires reset
84: after suspend using
1.1 deraadt 85: "<strong>ifconfig fxp0 down; ifconfig fxp0 up</strong>".<p>
86:
87: After a suspend, the profiling clock is not running. Patches are
88: being worked on.<p>
89:
1.50 ! horacio 90: Sound is supported using the <a
! 91: href="http://www.openbsd.org/cgi-bin/man.cgi?query=neo&sektion=4">
! 92: neo(4)</a> device driver. Sometimes upon boot, a hang happens
! 93: when trying to determine the AC97 mixer type.<p>
1.1 deraadt 94:
95: When the memory stick slot is empty, it can cause errors which overflow
96: the dmesg buffer, and thus confuse the OpenBSD install program.
97: The BIOS Setup, (accessed using F2), has an option to disable the
98: memory stick.<p>
99:
1.19 deraadt 100: An XF86Config file suitable for use with XFree86 3.3.X may be
1.21 markus 101: found <a href="xf86configs/vaioz505r">here</a>.
1.19 deraadt 102: <p>
103:
1.1 deraadt 104: Contact <a href=mailto:deraadt@openbsd.org>Theo de Raadt</a>.
105: </td>
106: </tr><tr>
107: <td>
108: Sony VAIO z505s
109: </td><td>
110: Similar to the VAIO z505r, except that the provided USB floppy has
111: some problems.<p>
112: Contact <a href=mailto:provos@openbsd.org>Niels Provos</a>.
113: </td>
114: </tr><tr>
115: <td>
116: Sony VAIO 747</td>
117: </td><td>
1.33 markus 118: Ever since OpenBSD 2.6, XFree86 and APM do work.<p>
1.2 markus 119:
120: Ships with a PCMCIA modem card (COM One MCC220 Platinium Card), which works.<p>
121:
122: Sound works (8 bit only).<p>
123:
124: APM behaviour similar to the VAIO z505r,
125: except that hibernation has not been tested.<p>
126:
127: USB does not work.<p>
128:
1.21 markus 129: An XF86Config file can be found
130: <a href="xf86configs/vaio747">here</a>.<p>
131:
1.2 markus 132: Contact <a href=mailto:markus@openbsd.org>Markus Friedl</a>.
1.1 deraadt 133: </td>
134: </tr><tr>
135: <td>
136: Sony VAIO PCG 505-FX
137: </td><td>
138: Unknown.
139: </td>
140: </tr><tr>
141: <td>
142: IBM Thinkpad 701C
143: </td><td>
144: All features including hibernation and APM work.<p>
145:
146: Contact <a href=mailto:todd@openbsd.org>Todd Fries</a>.
147: </td>
148: </tr><tr>
149: <td>
150: IBM Thinkpad 770Z
151: </td><td>
1.39 angelos 152: <p>As of OpenBSD 2.8, almost everything works fine.</p>
1.1 deraadt 153:
1.39 angelos 154: <p>This laptop does not really have a BIOS; most of the device
1.48 jufi 155: settings, like IRQ assignments etc. have to be done through
1.39 angelos 156: Windows.</p>
157:
158: <p>You can get the serial and infrared ports to be recognized
159: as com* devices by playing with the IRQ assignments in
160: Windows. Likewise for the parallel port (it's lpt2).</p>
161:
162: <p>You will need this line in your kernel configuration file for
163: APM to work at all:</p>
164:
165: <pre>
166: option APM_DISABLE_INTERRUPTS=0
167: </pre>
168:
169: <p>Hibernation (save to disk) works fine as long as you have a
170: Windows partition with enough disk space (a bit more than the
171: system memory). Suspend/resume/powerdown all work fine;
172: however, doing hibernation while in X windows (tested in
173: XFree86 3.3.6) causes framebuffer corruption and it seems that
174: the only way to recover is to exit and restart the X server;
175: switching virtual terminals doesn't fix it. It has been
176: suggested that switching between different resolutions might
177: fix it. XFree86 4.0 fixes that problem, but last I checked did
178: not have accelerated support for the driver. The best
179: work-around is to switch to text mode before hibernating.</p>
180:
181: <p>If you enable the external monitor (Fn+F7), XFree86 3.3.6
182: goes into some weird rainbow pattern and eventually freezes
183: the system (unless you switch to text mode or otherwise kill
184: the server within a few seconds); if you switch to text mode,
185: you have to kill the X server (switching back to graphics mode
186: will cause a crash). Enabling the external monitor while in
187: video mode causes no side effects; you can then start X or
188: switch to it if it's already running.</p>
189:
1.50 ! horacio 190: <p>The <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=clcs&sektion=4">clcs(4)</a> driver is somewhat flakey, so you're best off
1.39 angelos 191: disabling it. It doesn't really matter though since the
1.50 ! horacio 192: soundblaster (<a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sb&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Curren&arch=i386">sb(4)</a>) will attach and work fine. You may have to play with IRQ assignments
! 193: to get that to work.</p>
1.1 deraadt 194:
1.34 nate 195: An XF86Config file can be found
196: <a href="xf86configs/thinkpad770z">here</a>.<p>
1.12 chris 197:
1.1 deraadt 198: Contact <a href=mailto:angelos@openbsd.org>Angelos Keromytis</a>.
199: </td>
200: </tr><tr>
201: <td>
1.43 angelos 202: IBM Thinkpad A21p
203: </td><td>
204: See the entry for the T21. Everything is the same except for
205: the video card, which is an ATI Rage 128 Mobility LF. OpenBSD
206: 2.8 post mid-December with XFree86 4.0.2 works great at
207: 1600x1200 24bpp. You need to:
208: <pre>
209: sysctl -w machdep.allowaperture=2
210: </pre>
211: and enter the correct frequency ranges in the Monitor section
212: of XF86Config. Here's a sample working
213: <a href="xf86configs/thinkpada21p">XF86Config.</a>
214: </td>
215: </tr><tr>
216: <td>
1.39 angelos 217: IBM Thinkpad T21
218: </td><td>
219: <p>As of OpenBSD 2.8, everything works fine.</p>
220:
221: <p>Here is the fdisk output; the easiest way of getting there is
222: to resize the Windows partition (I use PartitionMagic) and move
223: it to the end of the disk, then create an OpenBSD partition
224: (and ignore the partition resizing fdisk does -- just go ahead
225: and create all the filesystems you need with disklabel).</p>
226:
227: <pre>
228: Starting Ending
229: #: id cyl hd sec - cyl hd sec [ start - size]
230: -------------------------------------------------------------------------
1.50 ! horacio 231: 0: 1C 1023 1 1 - 1023 239 63 [ 42003423 - 20502657] <Unknown ID>
1.39 angelos 232: *1: A6 0 1 1 - 1021 239 63 [ 63 - 15452577] OpenBSD
233: 2: 00 0 0 1 - 0 0 0 [ 0 - 0] unused
234: 3: 00 0 0 1 - 0 0 0 [ 0 - 0] unused
235: </pre>
236:
237: <p>To get it to see the serial and infrared ports (both as com*
238: devices), you need to play with the IRQ assignments in the
239: BIOS; just set them to the default values as found in the
240: GENERIC config file. Likewise for the parallel port (OpenBSD
241: can see lpt2). You may have to play with the Windows
242: assignments for this as well.</p>
243:
1.44 angelos 244: <p>There's at least two miniPCI cards available at this point:
245: one is an (unsupported) WinModem, and the other is a combo
246: ethernet/modem card. The ethernet works just fine (detected
247: as an fxp/inphy card); the modem looks like it's a real one,
248: but it's not yet supported.</p>
1.39 angelos 249:
250: <p>Sound (CS4614) works fine. To avoid system freeze when using
1.44 angelos 251: Cardbus and audio simultaneously, you *may* need to set at least
252: two IRQs for use by PCI devices, in the BIOS; I use 9 and 11. It
253: is also necessary to turn off PCI Power Management in the BIOS
254: Power configuration (that's the only menu that scrolls, so make
255: sure you go to the bottom of the page :-)</p>
1.39 angelos 256:
1.41 angelos 257: <p>APM works except for hibernation (requires OS support). To
258: get "halt -p" to work, you must set the sysctl variable
259: machdep.apmhalt to 1 (you need OpenBSD 2.8-current with
260: sources from mid-January, or later). You will need this line
261: in your kernel configuration file for APM to work at all:</p>
1.39 angelos 262:
263: <pre>
264: option APM_DISABLE_INTERRUPTS=0
265: </pre>
266:
267: <p>Although the video card is supposed to work with XFree86
268: 3.3.6pl8, I've only managed to get it to work with XFree86
269: 4.0.1 with the patches found <a
270: href="http://www.probo.com/timr/savagemx.html">here</a> (you
271: can also find binaries of the driver for OpenBSD 2.8 at the
1.40 angelos 272: same location). You need to have a kernel with "option
1.39 angelos 273: INSECURE" and set the securelevel to -1 in /etc/rc.securelevel
274: (so the X server can open /dev/mem and mmap() the BIOS). In
1.46 angelos 275: this configuration, it can do 1400x1050 at 16bpp (version 1.1.13
276: of the savage driver works fine at 24bpp as well).</p>
1.39 angelos 277:
1.41 angelos 278: <p><b>UPDATE:</b> The above-mentioned patches have been
279: included in XFree86 4.0.2, and work out of the box. You don'
280: need a kernel with the option INSECURE set, just set the
1.40 angelos 281: machdep.allowaperture sysctl variable to 2, typically in
282: /etc/sysctl.conf, if you have an OpenBSD 2.8 (or later) built
283: from sources updated after December 15th 2000.</p>
284:
1.39 angelos 285: <p>Note that some models only do 1024x768. Those that do
286: 1400x1050, can also do 1600x1200 using a virtual screen
287: (wherein the whole display shifts as you go "off-screen"); I
288: have not tested whether that works (it does in Windows).</p>
289:
290: <p>If you close the lid of the laptop, the system suspends;
291: under XFree86 4.0, resuming works fine with respect to the
292: display (XFree86 3.3.6 might not be able to cope with this --
293: it couldn't on the ThinkPad 770Z).</p>
294:
1.49 angelos 295: <p>An XF86Config file for XFree86 4.0 can be found <a
1.39 angelos 296: href="xf86configs/thinkpadt21">here</a>.</p>
297:
1.49 angelos 298: <p><b>UPDATE</b> Apparently, recent T21s have the ATI Rage
299: 3D Rage Mobility instead.
300: <a href="xf86configs/thinkpadt21-2">Here's</a> an XF86Config
301: for XFree86 4.0 for this configuration.</p>
302:
1.40 angelos 303: <p>One annoying thing is when you take out one of the UltraBay
304: 2000 devices; the system starts beeping. The only way to make it
305: stop is to suspend and then plug in a device in the UltraBay (not
306: necessarily the same one). Note that hot-swap of UltraBay 2000
307: devices is not currently supported in OpenBSD (as of 2.8), thus
308: it's only safe to hot-swap batteries.</p>
309:
1.39 angelos 310: <p>Contact <a href=mailto:angelos@openbsd.org>Angelos Keromytis</a>.</p>
311: </td>
312: </tr><tr>
313: <td>
1.1 deraadt 314: IBM Thinkpad 760
315: </td><td>
316: As of OpenBSD 2.6, XFree86 and APM do not work.<p>
317:
318: Newer versions of XFree86 support X, and patches are available.<p>
319:
320: MWave modem/sound does not work.<p>
321:
322: APM has been fixed post-2.6 as well, and patches are forthcoming.<p>
323:
324: Contact <a href=mailto:todd@openbsd.org>Todd Fries</a>.
325: </td>
326: </tr><tr>
327: <td>
1.27 marc 328: IBM Thinkpad T20
329: </td><td>
1.42 marc 330: Running OpenBSD 2.7 (and later) apm mostly works. To
331: get "halt -p" to work, you must set the sysctl variable
332: machdep.apmhalt to 1 (you need OpenBSD 2.8-current with
333: sources from mid-January, or later). The unit goes into
334: suspend mode when top is closed. Restores nicely
1.27 marc 335: when top opened.<p>
336:
337: Built in modem is a winmodem... ignore it. Actually it is on
338: a `mini-pci' card so it can probably be removed.<p>
339:
1.30 marc 340: Audio works, but you have to turn off PCI sleep mode in the BIOS.<p>
1.27 marc 341:
1.36 marc 342: OpenBSD X11 supports this machine as of 2.8, but there is lots
1.47 marc 343: of visual noise at 32bpp. Image is fine at 16 bpp. XF4 config
344: file for OpenBSD 2.9 can be found
345: <a href="xf86configs/thinkpadt20">here</a><p>
1.36 marc 346:
1.28 marc 347: See <a href="http://www.snafu.org/t20/">http://www.snafu.org/t20/</a>
1.36 marc 348: for more info.<p>
1.28 marc 349:
1.27 marc 350: Contact <a href=mailto:marc@snafu.org>Marco S Hyman</a>.
351: </td>
352: </tr><tr>
353: <td>
1.11 millert 354: Toshiba Libretto 50CT
355: </td><td>
356: APM works but you need to be careful not to use the last
357: 32meg or so of the disk since that's where the BIOS dumps
358: the long time hibernation image. You can take a look at
359: the bios geometry in disklabel to see exactly how many sectors
360: it wants. Failure to do so will cause filesystem corruption
361: during suspend.
362: <p>
1.50 ! horacio 363: The libretto uses a single IRQ for both
! 364: <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sb&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">sb(4)</a>
! 365: and <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wss&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">wss</a>
! 366: so the best thing to do is to choose one and disable the other
! 367: in the kernel.
1.11 millert 368: The pcmcia external floppy drive is not currently supported
369: by OpenBSD, but it can be used during the install.
370: <p>
371: Installation can be a bit tricky with only a single pcmcia
372: slot. The best way to do this is to do a network install.
373: To do this, load the boot floppy and at the boot prompt,
374: enter <em>boot -c</em>. When you see the <em>UKC</em>
375: prompt, unplug the floppy drive, plug in your network card,
376: and then type exit. The kernel will then probe the network
377: card and you should be able to do a normal network install.
378: You may find it necessary to disable the sound devices in
379: the BIOS in order for the boot floppy to correctly detect
380: your network card.
381: <p>
1.18 millert 382: An XF86Config file suitable for use with XFree86 3.3.X may be
383: found <a href="xf86configs/libretto50ct">here</a>.
384: <p>
1.11 millert 385: Contact <a href=mailto:millert@openbsd.org>Todd Miller</a>.
386: </td>
387: </tr><tr>
388: <td>
1.20 millert 389: Toshiba Libretto 100CT
390: </td><td>
391: Most of the information listed in the Libretto 50CT entry
392: apply to the 100CT as well.
393: <p>
394: X11 works in 800x400 mode. An XF86Config file suitable for
395: use with XFree86 3.3.X may be found
396: <a href="xf86configs/libretto100ct">here</a>.
397: <p>
1.27 marc 398: Contact <a href=mailto:millert@openbsd.org>Todd Miller</a>.
1.20 millert 399: </td>
400: </tr><tr>
401: <td>
1.1 deraadt 402: Toshiba Portege 660CDT
403: </td><td>
404: APM is completely broken.<p>
405:
1.50 ! horacio 406: The mixed <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sb&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">sb(4)</a>
! 407: and <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wss&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">wss(4)</a> sound
1.1 deraadt 408: hardware can cause some grief. Newer versions of the flash
409: BIOS are worse, since they are less flexible about what interrupts
410: they allow.<p>
411:
412: Contact <a href=mailto:deraadt@openbsd.org>Theo de Raadt</a>.
413: </td>
414: </tr><tr>
415: <td>
416: Digital HiNote VP735
417: </td><td>
418: APM works fully.<p>
419:
1.23 mickey 420: Everything on the machine works.<p>
1.1 deraadt 421:
1.22 mickey 422: An XF86Config file suitable for use with XFree86 3.3.X may be
423: found <a href="xf86configs/hinotevp700">here</a>.
424: <p>
425:
1.1 deraadt 426: Contact <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a>.
427: </td>
1.3 deraadt 428: </tr><tr>
429: <td>
430: Fujitsu Lifebook C325
431: </td><td>
432: APM works fully.<p>
433:
434: Sound works when the BIOS is told to activate SB emulation mode.
435:
436: Everything else on the machine works.<p>
437:
438: Contact <a href=mailto:tom@knienieder.com>Tom Knienieder</a>.
439: </td>
1.4 deraadt 440: </tr><tr>
441: <td>
1.14 d 442: Fujitsu Stylistic 500
443: </td><td>
444: APM works.<p>
445:
446: Serial port doesn't work.<p>
447:
448: Some tweaks needed for small memory kernel (4Mb).<p>
449:
450: X 'works' (thrashes like crazy). <p>
451:
452: Contact <a href=mailto:d@openbsd.org>David Leonard</a>.
453: </td>
454: </tr><tr>
455: <td>
1.4 deraadt 456: Siemens SCENIC Mobile 360
457: </td><td>
458: APM works fully.<p>
459:
460: Sound works, using OSS.<p>
461:
462: Contact <a href=mailto:b1000@softhome.net>Dan Carlsson</a>.
463: </td>
1.5 deraadt 464: </tr><tr>
465: <td>
466: Dell Inspiron 3200 D233XT (Bios release: A10)
467: </td><td>
468: APM works fully.<p>
469:
470: Suspend (to ram or disk) does not work under X (X server does not
471: restore screen upon resume), but DPMS do (screen is turned off after
472: a while if the machine isn't used). BIOS APM settings (for automatic
473: suspend) interfere with X server, and should be disabled.<p>
474:
475: Suspend to disk needs a DOS (FAT16) partition containing a file named
476: "SAVE2DSK.BIN". This file which is created via Dell tools under
477: Windows 98 (it's present out of factory), is sized (ram size + 2 or 3
478: MB). An ad hoc DOS partition is thus required (it must be the first
479: partition on disk).<p>
480:
481: PCMCIA: works except "live" card ejection or insertion (which lock
482: the machine, a hard reset is required).<p>
483:
484: USB: does not work, if enabled, kernel hangs at boot during USB
485: controller detection.<p>
486:
487: Contact <a href=mailto:b1000@softhome.net>Dan Carlsson</a>.
488: </td>
1.6 ericj 489: </tr><tr>
490: <td>
491: Toshiba Tecra 500CS
492: </td><td>
1.7 brad 493: APM is broken, However it <b>halt -p</b> does work.<p>
1.6 ericj 494:
1.7 brad 495: Sound works by default with the GENERIC kernel, but with the speakers
496: is not really worth it. X runs nicely as well.<p>
1.6 ericj 497:
1.7 brad 498: Contact <a href=mailto:ericj@monkey.org>Eric Jackson</a>.
1.6 ericj 499: </td>
1.7 brad 500: </tr><tr>
501: <td>
502: Toshiba Tecra 500CDT
503: </td><td>
1.14 d 504: APM is completely broken (and can trash your disk).<p>
505:
506: XFree86 works (800x600 16bpp).<p>
1.7 brad 507:
1.14 d 508: Sound works (21739 Hz, half duplex stereo).<p>
1.7 brad 509:
1.14 d 510: <!-- Serial IR is said to work, needs verification. -->
1.7 brad 511:
1.14 d 512: Contact <a href=mailto:brad@openbsd.org>Brad Smith</a>,
513: or <a href=mailto:d@openbsd.org>David Leonard</a>.
1.7 brad 514: </td>
1.10 aaron 515: </tr><tr>
516: <td>
517: Toshiba Tecra 550CDT
518: </td><td>
519: APM deep sleep (<b>zzz</b>) works, but <b>-S</b> wakes up immediately.<p>
520:
521: XFree86 works beautifully.<p>
522:
523: Sound works, after some IRQ tinkering in the BIOS.<p>
524:
1.50 ! horacio 525: USB works; at least, I plugged a digital camera in, and the
! 526: <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ugen&sektion=4">ugen(4)</a> driver detected and configured it.<p>
1.10 aaron 527:
1.16 aaron 528: The built-in modem does not work since it requires software only available in Windows; that is, it does not implement a true RS232 communication port.<p>
1.10 aaron 529:
530: The pcic is broken in this machine, so I cannot accurately comment on PCMCIA attach/detach.<p>
531:
532: Contact <a href=mailto:aaron@openbsd.org>Aaron Campbell</a>.
533: </td>
1.13 mickey 534: </tr><tr>
535: <td>
536: NEC Versa 2000
537: </td><td>
538: APM works fully.<p>
1.1 deraadt 539:
1.13 mickey 540: Everything on the machine works.<p>
541:
542: Contact <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a>.
543: </td>
1.29 kevlo 544: </tr><tr>
545: <td>
546: Acer TravelMate 345
547: </td><td>
548: As of OpenBSD 2.7-CURRENT, APM works.<p>
549:
550: XFree86 works (800x600 16bpp).<p>
551:
552: Sounds works.<p>
553:
554: Lucent modem does not work.<p>
555:
556: Contact <a href=mailto:kevlo@openbsd.org>Kevin Lo</a>.
1.32 nate 557: </td>
558: </tr><tr>
559: <td>
560: Compaq Armada M700<p>
561: </td><td>
562: APM works correctly, but you cannot suspend while in X. You
563: must suspend from the console.
564:
565: CardBus works.<p>
566:
567: Internal 10/100 Ethernet (for those models that have it).
1.50 ! horacio 568: Works beautifully with the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=fxp&sektion=4">fxp(4)</a> driver. <p>
1.32 nate 569:
570: No sound support as of now. People are supposedly working on
571: this.<p>
572:
573: No internal modem support as of now. (It's a winmodem.)
574: There is a binary only driver for Linux. There is also the
575: <a href="http://linmodems.org">linmodem project</a> that is
576: trying to make an opensource winmodem driver.<p>
577:
1.35 nate 578: An XF86Config file can be found
579: <a href="xf86configs/armadam700">here</a>.<p>
580:
1.32 nate 581: Contact <a href=mailto:nate@openbsd.org>Nathan Binkert</a>.
1.47 marc 582: </td>
583: </tr><tr>
584: <td>
585: Dell Latitude CPt<p>
586: </td><td>
587: apm -z and -S work.<p>
588:
589: Sound works.<p>
590:
591: XFree86 v3 works in 1024x768x24bpp. XF4 looks better in 16bpp.<p>
592:
593: Both PCMCIA slots work.<p>
594:
595: USB is detected, but untested. It does not appear to work after
596: a suspend.<p>
597:
598: An XF4 config file can be found
599: <a href="xf86configs/latitudecpt">here</a>.<p>
600:
601: Contact <a href=mailto:op21@squish.org>Paul Wang</a>.
1.31 jufi 602: </td></tr>
1.1 deraadt 603: </table>
604:
605: <hr>
606: <a href=plat.html><img height=24 width=24 src=back.gif border=0 alt=OpenBSD></a>
607: <a href=mailto:www@openbsd.org>www@openbsd.org</a>
608: <br>
1.50 ! horacio 609: <small>$OpenBSD: i386-laptop.html,v 1.49 2001/06/03 23:35:06 angelos Exp $</small>
1.1 deraadt 610:
611: </body>
612: </html>
![[BACK]](/icons/back.gif){kind=icon}
Return to i386-laptop.html CVS log ![[TXT]](/icons/text.gif){kind=icon}
![[DIR]](/icons/dir.gif){kind=icon}
Up to [local] / www