Annotation of www/i386-laptop.html, Revision 1.53
1.1 deraadt 1: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML Strict//EN">
2: <html>
3: <head>
4: <title>OpenBSD/i386 Laptop Page</title>
5: <link rev=made href=mailto:www@openbsd.org>
6: <meta name="resource-type" content="document">
1.17 wvdputte 7: <meta name="description" content="OpenBSD laptop">
1.1 deraadt 8: <meta name="keywords" content="openbsd,main">
9: <meta name="distribution" content="global">
10: <meta name="copyright" content="This document copyright 1997,1998 by OpenBSD.">
11: </head>
12:
13: <BODY BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#23238E">
14: <img alt="[OpenBSD]" height=30 width=141 SRC="images/smalltitle.gif">
15: <p>
16: <h2><font color=#e00000>i386 Laptop Status</font><hr></h2>
17:
18: <p>
1.51 jufi 19: This is a list of laptops known to be working with OpenBSD 2.9
1.1 deraadt 20:
21: <p>
1.53 ! ian 22: If your laptop isn't listed below that doesn't mean that it won't work,
1.38 deraadt 23: and you will most likely find a similar model that is listed below. Starting
24: with OpenBSD 2.6, almost all laptops worked very well, with only minimal
1.45 chris 25: issues remaining. Later OpenBSD releases perform even better.
1.38 deraadt 26: <p>
27: Of those that have problems..
1.1 deraadt 28: <ul>
1.5 deraadt 29: <li>Some exhibit problems with APM support. Note that <strong>apm -S</strong>
30: fails to suspend some laptops, but this is not a major concern.
1.38 deraadt 31: <li>Some lack sound support
32: <li>A few have subtle bugs with their PCMCIA and Cardbus support
33: <li>XFree86 does not support some displays properly. Sometimes XFree86 4.x helps.
1.1 deraadt 34: <li>Or some other built-in device doesn't work..
35: <li>Some have problems with pcmcia card eject interrupts.
36: </ul>
37:
38: <p>
39: If you have your laptop working (or not working) and it isn't listed below,
1.45 chris 40: please mail <a href="mailto:www@openbsd.org">www@openbsd.org</a> so that it
1.1 deraadt 41: can be listed. Please supply as much information as possible.
42:
43: <p>
44: APM problem reports should be sent to our APM developers,
45: <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a> and
46: <a href=mailto:weingart@openbsd.org>Tobias Weingartner</a>.
47:
48: <p>
49: <table border=1>
50: <tr>
51: <th>Laptop</th>
52: <th>Notes</th>
53: </tr><tr>
54: <td>
1.15 beck 55: Sony VAIO F430
56: </td><td>
57: As of OpenBSD 2.6-Current (Feb 17/00)<P>
58:
59: APM: "<strong>zzz</strong>" suspend works, as does the keyboard
60: suspend. "<strong>halt -p</strong>" and "<strong>apm -S</strong>"
61: don't. (but I've yet to look for phdisk utilities below - will be
62: investigating shortly.) <P>
63:
64: DVD drive, floppy all function. Ethernet works after wakeup with
65: the card I'm using (3Com 3c589). <P>
66:
67: Contact <a href=mailto:beck@openbsd.org>Bob Beck</a>.
68: </td>
1.53 ! ian 69: </tr>
! 70: <tr>
1.15 beck 71: <td>
1.1 deraadt 72: Sony VAIO z505r
73: </td><td>
74: APM support: "<strong>zzz</strong>", suspend via keyboard, hibernation
75: via keyboard, and "<strong>halt -p</strong>" all work.
76: "<strong>apm -S</strong>" wakes up immediately.<p>
77:
78: Hibernation uses a block at the end of the disk, approximately
79: 3-5MB larger than the memory in your machine. To repair hibernation,
80: use "<strong>phdisk.exe /create /partition</strong>" to setup the
81: partition. The phdisk program is available on the boot
82: floppy image provided on the first recovery CD.<p>
83:
1.38 deraadt 84: Built-in ethernet works fine, but occasionally requires reset
85: after suspend using
1.1 deraadt 86: "<strong>ifconfig fxp0 down; ifconfig fxp0 up</strong>".<p>
87:
88: After a suspend, the profiling clock is not running. Patches are
89: being worked on.<p>
90:
1.50 horacio 91: Sound is supported using the <a
92: href="http://www.openbsd.org/cgi-bin/man.cgi?query=neo&sektion=4">
93: neo(4)</a> device driver. Sometimes upon boot, a hang happens
94: when trying to determine the AC97 mixer type.<p>
1.1 deraadt 95:
96: When the memory stick slot is empty, it can cause errors which overflow
97: the dmesg buffer, and thus confuse the OpenBSD install program.
98: The BIOS Setup, (accessed using F2), has an option to disable the
99: memory stick.<p>
100:
1.19 deraadt 101: An XF86Config file suitable for use with XFree86 3.3.X may be
1.21 markus 102: found <a href="xf86configs/vaioz505r">here</a>.
1.19 deraadt 103: <p>
104:
1.1 deraadt 105: Contact <a href=mailto:deraadt@openbsd.org>Theo de Raadt</a>.
106: </td>
1.53 ! ian 107: </tr>
! 108: <tr>
1.1 deraadt 109: <td>
110: Sony VAIO z505s
111: </td><td>
112: Similar to the VAIO z505r, except that the provided USB floppy has
113: some problems.<p>
114: Contact <a href=mailto:provos@openbsd.org>Niels Provos</a>.
115: </td>
116: </tr><tr>
117: <td>
118: Sony VAIO 747</td>
119: </td><td>
1.33 markus 120: Ever since OpenBSD 2.6, XFree86 and APM do work.<p>
1.2 markus 121:
122: Ships with a PCMCIA modem card (COM One MCC220 Platinium Card), which works.<p>
123:
124: Sound works (8 bit only).<p>
125:
126: APM behaviour similar to the VAIO z505r,
127: except that hibernation has not been tested.<p>
128:
129: USB does not work.<p>
130:
1.21 markus 131: An XF86Config file can be found
132: <a href="xf86configs/vaio747">here</a>.<p>
133:
1.2 markus 134: Contact <a href=mailto:markus@openbsd.org>Markus Friedl</a>.
1.1 deraadt 135: </td>
1.53 ! ian 136: </tr>
! 137: <tr>
1.1 deraadt 138: <td>
139: Sony VAIO PCG 505-FX
140: </td><td>
141: Unknown.
142: </td>
1.53 ! ian 143: </tr>
! 144: <tr>
! 145: <td>Sony VAIO PCG XG700K</td>
! 146: <td>
! 147: <p>2.9 (current as of July 2001) basically works fine except for
! 148: halt -p, which doesn't power off.
! 149:
! 150: <p>apm -z only puts the system into light sleep
! 151: (this may be fixable with phdisk); apm -s does nothing.
! 152:
! 153: <p>XFree86 4.0 using the S3 savage driver works fine at 1024x768.
! 154: 1200x1024 should be possible but I haven't tried it.
! 155: My XF86Config for XFree86 4.0 may be found
! 156: <a href="xf86configs/vaioxg700k">here</a>.
! 157:
! 158: <p>Sound works nicely as yds, ac97 and audio0.
! 159:
! 160: <p>USB is detected but haven't tested it yet.
! 161:
! 162: <p>All three cardbus slots are configured when docked (two when undocked).
! 163: Sometimes locks up when removing my cheap NE card.
! 164:
! 165: <p>The internal WinModem is not supported, nor is there yet
! 166: any support for Firewire or the "Jog Dialer".
! 167:
! 168: <p>Contact Ian Darwin.
! 169: </td>
! 170: </tr>
! 171: <tr>
1.1 deraadt 172: <td>
173: IBM Thinkpad 701C
174: </td><td>
175: All features including hibernation and APM work.<p>
176:
177: Contact <a href=mailto:todd@openbsd.org>Todd Fries</a>.
178: </td>
179: </tr><tr>
180: <td>
181: IBM Thinkpad 770Z
182: </td><td>
1.39 angelos 183: <p>As of OpenBSD 2.8, almost everything works fine.</p>
1.1 deraadt 184:
1.39 angelos 185: <p>This laptop does not really have a BIOS; most of the device
1.48 jufi 186: settings, like IRQ assignments etc. have to be done through
1.39 angelos 187: Windows.</p>
188:
189: <p>You can get the serial and infrared ports to be recognized
190: as com* devices by playing with the IRQ assignments in
191: Windows. Likewise for the parallel port (it's lpt2).</p>
192:
193: <p>You will need this line in your kernel configuration file for
194: APM to work at all:</p>
195:
196: <pre>
197: option APM_DISABLE_INTERRUPTS=0
198: </pre>
199:
200: <p>Hibernation (save to disk) works fine as long as you have a
201: Windows partition with enough disk space (a bit more than the
202: system memory). Suspend/resume/powerdown all work fine;
203: however, doing hibernation while in X windows (tested in
204: XFree86 3.3.6) causes framebuffer corruption and it seems that
205: the only way to recover is to exit and restart the X server;
206: switching virtual terminals doesn't fix it. It has been
207: suggested that switching between different resolutions might
208: fix it. XFree86 4.0 fixes that problem, but last I checked did
209: not have accelerated support for the driver. The best
210: work-around is to switch to text mode before hibernating.</p>
211:
212: <p>If you enable the external monitor (Fn+F7), XFree86 3.3.6
213: goes into some weird rainbow pattern and eventually freezes
214: the system (unless you switch to text mode or otherwise kill
215: the server within a few seconds); if you switch to text mode,
216: you have to kill the X server (switching back to graphics mode
217: will cause a crash). Enabling the external monitor while in
218: video mode causes no side effects; you can then start X or
219: switch to it if it's already running.</p>
220:
1.50 horacio 221: <p>The <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=clcs&sektion=4">clcs(4)</a> driver is somewhat flakey, so you're best off
1.39 angelos 222: disabling it. It doesn't really matter though since the
1.50 horacio 223: soundblaster (<a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sb&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Curren&arch=i386">sb(4)</a>) will attach and work fine. You may have to play with IRQ assignments
224: to get that to work.</p>
1.1 deraadt 225:
1.34 nate 226: An XF86Config file can be found
227: <a href="xf86configs/thinkpad770z">here</a>.<p>
1.12 chris 228:
1.1 deraadt 229: Contact <a href=mailto:angelos@openbsd.org>Angelos Keromytis</a>.
230: </td>
231: </tr><tr>
232: <td>
1.43 angelos 233: IBM Thinkpad A21p
234: </td><td>
235: See the entry for the T21. Everything is the same except for
236: the video card, which is an ATI Rage 128 Mobility LF. OpenBSD
237: 2.8 post mid-December with XFree86 4.0.2 works great at
238: 1600x1200 24bpp. You need to:
239: <pre>
240: sysctl -w machdep.allowaperture=2
241: </pre>
242: and enter the correct frequency ranges in the Monitor section
243: of XF86Config. Here's a sample working
244: <a href="xf86configs/thinkpada21p">XF86Config.</a>
245: </td>
246: </tr><tr>
247: <td>
1.39 angelos 248: IBM Thinkpad T21
249: </td><td>
250: <p>As of OpenBSD 2.8, everything works fine.</p>
251:
252: <p>Here is the fdisk output; the easiest way of getting there is
253: to resize the Windows partition (I use PartitionMagic) and move
254: it to the end of the disk, then create an OpenBSD partition
255: (and ignore the partition resizing fdisk does -- just go ahead
256: and create all the filesystems you need with disklabel).</p>
257:
258: <pre>
259: Starting Ending
260: #: id cyl hd sec - cyl hd sec [ start - size]
261: -------------------------------------------------------------------------
1.50 horacio 262: 0: 1C 1023 1 1 - 1023 239 63 [ 42003423 - 20502657] <Unknown ID>
1.39 angelos 263: *1: A6 0 1 1 - 1021 239 63 [ 63 - 15452577] OpenBSD
264: 2: 00 0 0 1 - 0 0 0 [ 0 - 0] unused
265: 3: 00 0 0 1 - 0 0 0 [ 0 - 0] unused
266: </pre>
267:
268: <p>To get it to see the serial and infrared ports (both as com*
269: devices), you need to play with the IRQ assignments in the
270: BIOS; just set them to the default values as found in the
271: GENERIC config file. Likewise for the parallel port (OpenBSD
272: can see lpt2). You may have to play with the Windows
273: assignments for this as well.</p>
274:
1.44 angelos 275: <p>There's at least two miniPCI cards available at this point:
276: one is an (unsupported) WinModem, and the other is a combo
277: ethernet/modem card. The ethernet works just fine (detected
278: as an fxp/inphy card); the modem looks like it's a real one,
279: but it's not yet supported.</p>
1.39 angelos 280:
281: <p>Sound (CS4614) works fine. To avoid system freeze when using
1.44 angelos 282: Cardbus and audio simultaneously, you *may* need to set at least
283: two IRQs for use by PCI devices, in the BIOS; I use 9 and 11. It
284: is also necessary to turn off PCI Power Management in the BIOS
285: Power configuration (that's the only menu that scrolls, so make
286: sure you go to the bottom of the page :-)</p>
1.39 angelos 287:
1.41 angelos 288: <p>APM works except for hibernation (requires OS support). To
289: get "halt -p" to work, you must set the sysctl variable
290: machdep.apmhalt to 1 (you need OpenBSD 2.8-current with
291: sources from mid-January, or later). You will need this line
292: in your kernel configuration file for APM to work at all:</p>
1.39 angelos 293:
294: <pre>
295: option APM_DISABLE_INTERRUPTS=0
296: </pre>
297:
298: <p>Although the video card is supposed to work with XFree86
299: 3.3.6pl8, I've only managed to get it to work with XFree86
300: 4.0.1 with the patches found <a
301: href="http://www.probo.com/timr/savagemx.html">here</a> (you
302: can also find binaries of the driver for OpenBSD 2.8 at the
1.40 angelos 303: same location). You need to have a kernel with "option
1.39 angelos 304: INSECURE" and set the securelevel to -1 in /etc/rc.securelevel
305: (so the X server can open /dev/mem and mmap() the BIOS). In
1.46 angelos 306: this configuration, it can do 1400x1050 at 16bpp (version 1.1.13
307: of the savage driver works fine at 24bpp as well).</p>
1.39 angelos 308:
1.41 angelos 309: <p><b>UPDATE:</b> The above-mentioned patches have been
310: included in XFree86 4.0.2, and work out of the box. You don'
311: need a kernel with the option INSECURE set, just set the
1.40 angelos 312: machdep.allowaperture sysctl variable to 2, typically in
313: /etc/sysctl.conf, if you have an OpenBSD 2.8 (or later) built
314: from sources updated after December 15th 2000.</p>
315:
1.39 angelos 316: <p>Note that some models only do 1024x768. Those that do
317: 1400x1050, can also do 1600x1200 using a virtual screen
318: (wherein the whole display shifts as you go "off-screen"); I
319: have not tested whether that works (it does in Windows).</p>
320:
321: <p>If you close the lid of the laptop, the system suspends;
322: under XFree86 4.0, resuming works fine with respect to the
323: display (XFree86 3.3.6 might not be able to cope with this --
324: it couldn't on the ThinkPad 770Z).</p>
325:
1.49 angelos 326: <p>An XF86Config file for XFree86 4.0 can be found <a
1.39 angelos 327: href="xf86configs/thinkpadt21">here</a>.</p>
328:
1.49 angelos 329: <p><b>UPDATE</b> Apparently, recent T21s have the ATI Rage
330: 3D Rage Mobility instead.
331: <a href="xf86configs/thinkpadt21-2">Here's</a> an XF86Config
332: for XFree86 4.0 for this configuration.</p>
333:
1.40 angelos 334: <p>One annoying thing is when you take out one of the UltraBay
335: 2000 devices; the system starts beeping. The only way to make it
336: stop is to suspend and then plug in a device in the UltraBay (not
337: necessarily the same one). Note that hot-swap of UltraBay 2000
338: devices is not currently supported in OpenBSD (as of 2.8), thus
339: it's only safe to hot-swap batteries.</p>
340:
1.39 angelos 341: <p>Contact <a href=mailto:angelos@openbsd.org>Angelos Keromytis</a>.</p>
342: </td>
343: </tr><tr>
344: <td>
1.1 deraadt 345: IBM Thinkpad 760
346: </td><td>
347: As of OpenBSD 2.6, XFree86 and APM do not work.<p>
348:
349: Newer versions of XFree86 support X, and patches are available.<p>
350:
351: MWave modem/sound does not work.<p>
352:
353: APM has been fixed post-2.6 as well, and patches are forthcoming.<p>
354:
355: Contact <a href=mailto:todd@openbsd.org>Todd Fries</a>.
356: </td>
357: </tr><tr>
358: <td>
1.27 marc 359: IBM Thinkpad T20
360: </td><td>
1.42 marc 361: Running OpenBSD 2.7 (and later) apm mostly works. To
362: get "halt -p" to work, you must set the sysctl variable
363: machdep.apmhalt to 1 (you need OpenBSD 2.8-current with
364: sources from mid-January, or later). The unit goes into
365: suspend mode when top is closed. Restores nicely
1.27 marc 366: when top opened.<p>
367:
368: Built in modem is a winmodem... ignore it. Actually it is on
369: a `mini-pci' card so it can probably be removed.<p>
370:
1.30 marc 371: Audio works, but you have to turn off PCI sleep mode in the BIOS.<p>
1.27 marc 372:
1.36 marc 373: OpenBSD X11 supports this machine as of 2.8, but there is lots
1.47 marc 374: of visual noise at 32bpp. Image is fine at 16 bpp. XF4 config
375: file for OpenBSD 2.9 can be found
376: <a href="xf86configs/thinkpadt20">here</a><p>
1.36 marc 377:
1.28 marc 378: See <a href="http://www.snafu.org/t20/">http://www.snafu.org/t20/</a>
1.36 marc 379: for more info.<p>
1.28 marc 380:
1.27 marc 381: Contact <a href=mailto:marc@snafu.org>Marco S Hyman</a>.
382: </td>
383: </tr><tr>
384: <td>
1.11 millert 385: Toshiba Libretto 50CT
386: </td><td>
387: APM works but you need to be careful not to use the last
388: 32meg or so of the disk since that's where the BIOS dumps
389: the long time hibernation image. You can take a look at
390: the bios geometry in disklabel to see exactly how many sectors
391: it wants. Failure to do so will cause filesystem corruption
392: during suspend.
393: <p>
1.50 horacio 394: The libretto uses a single IRQ for both
395: <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sb&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">sb(4)</a>
396: and <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wss&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">wss</a>
397: so the best thing to do is to choose one and disable the other
398: in the kernel.
1.11 millert 399: The pcmcia external floppy drive is not currently supported
400: by OpenBSD, but it can be used during the install.
401: <p>
402: Installation can be a bit tricky with only a single pcmcia
403: slot. The best way to do this is to do a network install.
404: To do this, load the boot floppy and at the boot prompt,
405: enter <em>boot -c</em>. When you see the <em>UKC</em>
406: prompt, unplug the floppy drive, plug in your network card,
407: and then type exit. The kernel will then probe the network
408: card and you should be able to do a normal network install.
409: You may find it necessary to disable the sound devices in
410: the BIOS in order for the boot floppy to correctly detect
411: your network card.
412: <p>
1.18 millert 413: An XF86Config file suitable for use with XFree86 3.3.X may be
414: found <a href="xf86configs/libretto50ct">here</a>.
415: <p>
1.11 millert 416: Contact <a href=mailto:millert@openbsd.org>Todd Miller</a>.
417: </td>
418: </tr><tr>
419: <td>
1.20 millert 420: Toshiba Libretto 100CT
421: </td><td>
422: Most of the information listed in the Libretto 50CT entry
423: apply to the 100CT as well.
424: <p>
425: X11 works in 800x400 mode. An XF86Config file suitable for
426: use with XFree86 3.3.X may be found
427: <a href="xf86configs/libretto100ct">here</a>.
428: <p>
1.27 marc 429: Contact <a href=mailto:millert@openbsd.org>Todd Miller</a>.
1.20 millert 430: </td>
431: </tr><tr>
432: <td>
1.1 deraadt 433: Toshiba Portege 660CDT
434: </td><td>
435: APM is completely broken.<p>
436:
1.50 horacio 437: The mixed <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sb&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">sb(4)</a>
438: and <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wss&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">wss(4)</a> sound
1.1 deraadt 439: hardware can cause some grief. Newer versions of the flash
440: BIOS are worse, since they are less flexible about what interrupts
441: they allow.<p>
442:
443: Contact <a href=mailto:deraadt@openbsd.org>Theo de Raadt</a>.
444: </td>
445: </tr><tr>
446: <td>
447: Digital HiNote VP735
448: </td><td>
449: APM works fully.<p>
450:
1.23 mickey 451: Everything on the machine works.<p>
1.1 deraadt 452:
1.22 mickey 453: An XF86Config file suitable for use with XFree86 3.3.X may be
454: found <a href="xf86configs/hinotevp700">here</a>.
455: <p>
456:
1.1 deraadt 457: Contact <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a>.
458: </td>
1.3 deraadt 459: </tr><tr>
460: <td>
461: Fujitsu Lifebook C325
462: </td><td>
463: APM works fully.<p>
464:
465: Sound works when the BIOS is told to activate SB emulation mode.
466:
467: Everything else on the machine works.<p>
468:
469: Contact <a href=mailto:tom@knienieder.com>Tom Knienieder</a>.
470: </td>
1.4 deraadt 471: </tr><tr>
472: <td>
1.14 d 473: Fujitsu Stylistic 500
474: </td><td>
475: APM works.<p>
476:
477: Serial port doesn't work.<p>
478:
479: Some tweaks needed for small memory kernel (4Mb).<p>
480:
481: X 'works' (thrashes like crazy). <p>
482:
483: Contact <a href=mailto:d@openbsd.org>David Leonard</a>.
484: </td>
485: </tr><tr>
486: <td>
1.4 deraadt 487: Siemens SCENIC Mobile 360
488: </td><td>
489: APM works fully.<p>
490:
491: Sound works, using OSS.<p>
492:
493: Contact <a href=mailto:b1000@softhome.net>Dan Carlsson</a>.
494: </td>
1.5 deraadt 495: </tr><tr>
496: <td>
497: Dell Inspiron 3200 D233XT (Bios release: A10)
498: </td><td>
499: APM works fully.<p>
500:
501: Suspend (to ram or disk) does not work under X (X server does not
502: restore screen upon resume), but DPMS do (screen is turned off after
503: a while if the machine isn't used). BIOS APM settings (for automatic
504: suspend) interfere with X server, and should be disabled.<p>
505:
506: Suspend to disk needs a DOS (FAT16) partition containing a file named
507: "SAVE2DSK.BIN". This file which is created via Dell tools under
508: Windows 98 (it's present out of factory), is sized (ram size + 2 or 3
509: MB). An ad hoc DOS partition is thus required (it must be the first
510: partition on disk).<p>
511:
512: PCMCIA: works except "live" card ejection or insertion (which lock
513: the machine, a hard reset is required).<p>
514:
515: USB: does not work, if enabled, kernel hangs at boot during USB
516: controller detection.<p>
517:
518: Contact <a href=mailto:b1000@softhome.net>Dan Carlsson</a>.
519: </td>
1.6 ericj 520: </tr><tr>
521: <td>
522: Toshiba Tecra 500CS
523: </td><td>
1.7 brad 524: APM is broken, However it <b>halt -p</b> does work.<p>
1.6 ericj 525:
1.7 brad 526: Sound works by default with the GENERIC kernel, but with the speakers
527: is not really worth it. X runs nicely as well.<p>
1.6 ericj 528:
1.7 brad 529: Contact <a href=mailto:ericj@monkey.org>Eric Jackson</a>.
1.6 ericj 530: </td>
1.7 brad 531: </tr><tr>
532: <td>
533: Toshiba Tecra 500CDT
534: </td><td>
1.14 d 535: APM is completely broken (and can trash your disk).<p>
536:
537: XFree86 works (800x600 16bpp).<p>
1.7 brad 538:
1.14 d 539: Sound works (21739 Hz, half duplex stereo).<p>
1.7 brad 540:
1.14 d 541: <!-- Serial IR is said to work, needs verification. -->
1.7 brad 542:
1.14 d 543: Contact <a href=mailto:brad@openbsd.org>Brad Smith</a>,
544: or <a href=mailto:d@openbsd.org>David Leonard</a>.
1.7 brad 545: </td>
1.10 aaron 546: </tr><tr>
547: <td>
548: Toshiba Tecra 550CDT
549: </td><td>
550: APM deep sleep (<b>zzz</b>) works, but <b>-S</b> wakes up immediately.<p>
551:
552: XFree86 works beautifully.<p>
553:
554: Sound works, after some IRQ tinkering in the BIOS.<p>
555:
1.50 horacio 556: USB works; at least, I plugged a digital camera in, and the
557: <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ugen&sektion=4">ugen(4)</a> driver detected and configured it.<p>
1.10 aaron 558:
1.16 aaron 559: The built-in modem does not work since it requires software only available in Windows; that is, it does not implement a true RS232 communication port.<p>
1.10 aaron 560:
561: The pcic is broken in this machine, so I cannot accurately comment on PCMCIA attach/detach.<p>
562:
563: Contact <a href=mailto:aaron@openbsd.org>Aaron Campbell</a>.
564: </td>
1.13 mickey 565: </tr><tr>
566: <td>
567: NEC Versa 2000
568: </td><td>
569: APM works fully.<p>
1.1 deraadt 570:
1.13 mickey 571: Everything on the machine works.<p>
572:
573: Contact <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a>.
574: </td>
1.29 kevlo 575: </tr><tr>
576: <td>
577: Acer TravelMate 345
578: </td><td>
579: As of OpenBSD 2.7-CURRENT, APM works.<p>
580:
581: XFree86 works (800x600 16bpp).<p>
582:
583: Sounds works.<p>
584:
585: Lucent modem does not work.<p>
586:
587: Contact <a href=mailto:kevlo@openbsd.org>Kevin Lo</a>.
1.32 nate 588: </td>
589: </tr><tr>
590: <td>
591: Compaq Armada M700<p>
592: </td><td>
593: APM works correctly, but you cannot suspend while in X. You
594: must suspend from the console.
595:
596: CardBus works.<p>
597:
598: Internal 10/100 Ethernet (for those models that have it).
1.50 horacio 599: Works beautifully with the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=fxp&sektion=4">fxp(4)</a> driver. <p>
1.32 nate 600:
601: No sound support as of now. People are supposedly working on
602: this.<p>
603:
604: No internal modem support as of now. (It's a winmodem.)
605: There is a binary only driver for Linux. There is also the
606: <a href="http://linmodems.org">linmodem project</a> that is
607: trying to make an opensource winmodem driver.<p>
608:
1.35 nate 609: An XF86Config file can be found
610: <a href="xf86configs/armadam700">here</a>.<p>
611:
1.32 nate 612: Contact <a href=mailto:nate@openbsd.org>Nathan Binkert</a>.
1.47 marc 613: </td>
614: </tr><tr>
615: <td>
616: Dell Latitude CPt<p>
617: </td><td>
618: apm -z and -S work.<p>
619:
620: Sound works.<p>
621:
622: XFree86 v3 works in 1024x768x24bpp. XF4 looks better in 16bpp.<p>
623:
624: Both PCMCIA slots work.<p>
625:
626: USB is detected, but untested. It does not appear to work after
627: a suspend.<p>
628:
629: An XF4 config file can be found
630: <a href="xf86configs/latitudecpt">here</a>.<p>
631:
632: Contact <a href=mailto:op21@squish.org>Paul Wang</a>.
1.31 jufi 633: </td></tr>
1.1 deraadt 634: </table>
635:
636: <hr>
1.52 brad 637: <a href=i386.html><img height=24 width=24 src=back.gif border=0 alt=OpenBSD></a>
1.1 deraadt 638: <a href=mailto:www@openbsd.org>www@openbsd.org</a>
639: <br>
1.53 ! ian 640: <small>$OpenBSD: i386-laptop.html,v 1.52 2001/07/02 05:11:06 brad Exp $</small>
1.1 deraadt 641:
642: </body>
643: </html>