Annotation of www/i386-laptop.html, Revision 1.62
1.1 deraadt 1: <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML Strict//EN">
2: <html>
3: <head>
4: <title>OpenBSD/i386 Laptop Page</title>
5: <link rev=made href=mailto:www@openbsd.org>
6: <meta name="resource-type" content="document">
1.17 wvdputte 7: <meta name="description" content="OpenBSD laptop">
1.1 deraadt 8: <meta name="keywords" content="openbsd,main">
9: <meta name="distribution" content="global">
1.61 horacio 10: <meta name="copyright" content="This document copyright 1997-2001 by OpenBSD.">
1.1 deraadt 11: </head>
12:
13: <BODY BGCOLOR="#FFFFFF" TEXT="#000000" LINK="#23238E">
14: <img alt="[OpenBSD]" height=30 width=141 SRC="images/smalltitle.gif">
15: <p>
16: <h2><font color=#e00000>i386 Laptop Status</font><hr></h2>
17:
18: <p>
1.51 jufi 19: This is a list of laptops known to be working with OpenBSD 2.9
1.1 deraadt 20:
21: <p>
1.53 ian 22: If your laptop isn't listed below that doesn't mean that it won't work,
1.38 deraadt 23: and you will most likely find a similar model that is listed below. Starting
24: with OpenBSD 2.6, almost all laptops worked very well, with only minimal
1.45 chris 25: issues remaining. Later OpenBSD releases perform even better.
1.38 deraadt 26: <p>
27: Of those that have problems..
1.1 deraadt 28: <ul>
1.5 deraadt 29: <li>Some exhibit problems with APM support. Note that <strong>apm -S</strong>
30: fails to suspend some laptops, but this is not a major concern.
1.38 deraadt 31: <li>Some lack sound support
32: <li>A few have subtle bugs with their PCMCIA and Cardbus support
33: <li>XFree86 does not support some displays properly. Sometimes XFree86 4.x helps.
1.1 deraadt 34: <li>Or some other built-in device doesn't work..
35: <li>Some have problems with pcmcia card eject interrupts.
36: </ul>
37:
38: <p>
39: If you have your laptop working (or not working) and it isn't listed below,
1.45 chris 40: please mail <a href="mailto:www@openbsd.org">www@openbsd.org</a> so that it
1.1 deraadt 41: can be listed. Please supply as much information as possible.
42:
43: <p>
44: APM problem reports should be sent to our APM developers,
45: <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a> and
46: <a href=mailto:weingart@openbsd.org>Tobias Weingartner</a>.
47:
48: <p>
49: <table border=1>
50: <tr>
51: <th>Laptop</th>
52: <th>Notes</th>
1.54 ian 53: </tr>
54: <tr>
1.1 deraadt 55: <td>
1.54 ian 56: Acer TravelMate 345
1.15 beck 57: </td><td>
1.54 ian 58: As of OpenBSD 2.7-CURRENT, APM works.<p>
59:
60: XFree86 works (800x600 16bpp).<p>
61:
62: Sounds works.<p>
63:
64: Lucent modem does not work.<p>
1.15 beck 65:
1.54 ian 66: Contact <a href=mailto:kevlo@openbsd.org>Kevin Lo</a>.
1.15 beck 67: </td>
1.53 ian 68: </tr>
1.57 ian 69: <td>
70: Acer Travelmate 524TEV Laptop
71: </td>
72: <td>
73: <p>APM support works fully (under console and X)
74: <p>PCMCIA Card support (ne0) works fine
75: <p>Internal Intel Ethernet Express Pro 10/100 works
76: <p>XFree86 with ATI Rage Mobility AGP works (1024x768, 16bpp)
77: <p>Sound and winmodem do not work.
78: <p>Contact Matthias Schmidt <xhr@gmx.net>
79: </td>
80: </tr>
1.59 jufi 81:
82: <tr>
83: <td>
84: Asus L8400<p>
85: </td>
86: <td>
87: APM and suspend work completely (both in X and under console).<br>
88: Internal 10/100 Ethernet (Realtek 8139) works fine as well,
89: and so does the S3 Savage MX-MV graphics chip under XFree86 4.1.0.
90: <p>
91: Sound (ESS ES1989) and winmodem do not work.
92: <p>
1.60 jufi 93: The rest (PCMCIA, Infrared, USB) is untested.
1.59 jufi 94: <p>
95: Contact <a href="mailto:jufi@openbsd.org">Jan-Uwe Finck</a>.
96: </tr>
97:
1.53 ian 98: <tr>
1.15 beck 99: <td>
1.54 ian 100: Compaq Armada M700<p>
1.1 deraadt 101: </td><td>
1.54 ian 102: APM works correctly, but you cannot suspend while in X. You
103: must suspend from the console.
104:
105: CardBus works.<p>
106:
107: Internal 10/100 Ethernet (for those models that have it).
108: Works beautifully with the <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=fxp&sektion=4">fxp(4)</a> driver. <p>
109:
110: No sound support as of now. People are supposedly working on
111: this.<p>
112:
113: No internal modem support as of now. (It's a winmodem.)
114: There is a binary only driver for Linux. There is also the
115: <a href="http://linmodems.org">linmodem project</a> that is
116: trying to make an opensource winmodem driver.<p>
1.1 deraadt 117:
1.54 ian 118: An XF86Config file can be found
119: <a href="xf86configs/armadam700">here</a>.<p>
1.1 deraadt 120:
1.54 ian 121: Contact <a href=mailto:nate@openbsd.org>Nathan Binkert</a>.
122: </td>
123: </tr>
124: <tr>
125: <td>
126: Dell Inspiron 3200 D233XT (Bios release: A10)
127: </td><td>
128: APM works fully.<p>
1.1 deraadt 129:
1.54 ian 130: Suspend (to ram or disk) does not work under X (X server does not
131: restore screen upon resume), but DPMS do (screen is turned off after
132: a while if the machine isn't used). BIOS APM settings (for automatic
133: suspend) interfere with X server, and should be disabled.<p>
1.1 deraadt 134:
1.54 ian 135: Suspend to disk needs a DOS (FAT16) partition containing a file named
136: "SAVE2DSK.BIN". This file which is created via Dell tools under
137: Windows 98 (it's present out of factory), is sized (ram size + 2 or 3
138: MB). An ad hoc DOS partition is thus required (it must be the first
139: partition on disk).<p>
1.1 deraadt 140:
1.54 ian 141: PCMCIA: works except "live" card ejection or insertion (which lock
142: the machine, a hard reset is required).<p>
1.1 deraadt 143:
1.54 ian 144: USB: does not work, if enabled, kernel hangs at boot during USB
145: controller detection.<p>
1.19 deraadt 146:
1.54 ian 147: Contact <a href=mailto:b1000@softhome.net>Dan Carlsson</a>.
1.1 deraadt 148: </td>
1.53 ian 149: </tr>
150: <tr>
1.1 deraadt 151: <td>
1.54 ian 152: Dell Latitude CPt<p>
1.1 deraadt 153: </td><td>
1.54 ian 154: apm -z and -S work.<p>
1.2 markus 155:
1.54 ian 156: Sound works.<p>
1.2 markus 157:
1.54 ian 158: XFree86 v3 works in 1024x768x24bpp. XF4 looks better in 16bpp.<p>
1.2 markus 159:
1.54 ian 160: Both PCMCIA slots work.<p>
1.2 markus 161:
1.54 ian 162: USB is detected, but untested. It does not appear to work after
163: a suspend.<p>
1.2 markus 164:
1.54 ian 165: An XF4 config file can be found
166: <a href="xf86configs/latitudecpt">here</a>.<p>
1.21 markus 167:
1.54 ian 168: Contact <a href=mailto:op21@squish.org>Paul Wang</a>.
1.1 deraadt 169: </td>
1.53 ian 170: </tr>
171: <tr>
1.1 deraadt 172: <td>
1.55 ian 173: Dell Lattitude LMP-133ST
174: </td><td>
175: Generic kernel works. APM mostly works.
176: XFree86 v3 worked fine (8 bit only).
177: XF4.0 works with several problems, a band of pixels shifted down
178: and unreadability of the alternate virtual consoles (the latter
179: apparently fixed in current XF4; not tested on this machine).
180: <p>
181: An XF4 config file can be found
182: <a href="xf86configs/latitudelmp">here</a> and one for XFree86 R3
183: <a href="xf86configs/latitudelmp-xf3">here</a>.
184: <p>
185: Contact Ian Darwin.
186: </td>
187: </tr>
188: <tr>
189: <td>
1.54 ian 190: Digital HiNote VP735
1.1 deraadt 191: </td><td>
1.54 ian 192: APM works fully.<p>
193:
194: Everything on the machine works.<p>
195:
196: An XF86Config file suitable for use with XFree86 3.3.X may be
197: found <a href="xf86configs/hinotevp700">here</a>.
198: <p>
199:
200: Contact <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a>.
1.1 deraadt 201: </td>
1.54 ian 202: </tr><tr>
203: <td>
204: Fujitsu Lifebook C325
205: </td><td>
206: APM works fully.<p>
1.53 ian 207:
1.54 ian 208: Sound works when the BIOS is told to activate SB emulation mode.
1.53 ian 209:
1.54 ian 210: Everything else on the machine works.<p>
1.53 ian 211:
1.54 ian 212: Contact <a href=mailto:tom@knienieder.com>Tom Knienieder</a>.
213: </td>
214: </tr><tr>
215: <td>
216: Fujitsu Stylistic 500
217: </td><td>
218: APM works.<p>
1.53 ian 219:
1.54 ian 220: Serial port doesn't work.<p>
1.53 ian 221:
1.54 ian 222: Some tweaks needed for small memory kernel (4Mb).<p>
1.53 ian 223:
1.54 ian 224: X 'works' (thrashes like crazy). <p>
1.53 ian 225:
1.54 ian 226: Contact <a href=mailto:d@openbsd.org>David Leonard</a>.
227: </td>
1.53 ian 228: </tr>
229: <tr>
1.1 deraadt 230: <td>
231: IBM Thinkpad 701C
232: </td><td>
233: All features including hibernation and APM work.<p>
234:
235: Contact <a href=mailto:todd@openbsd.org>Todd Fries</a>.
236: </td>
237: </tr><tr>
238: <td>
239: IBM Thinkpad 770Z
240: </td><td>
1.39 angelos 241: <p>As of OpenBSD 2.8, almost everything works fine.</p>
1.1 deraadt 242:
1.39 angelos 243: <p>This laptop does not really have a BIOS; most of the device
1.48 jufi 244: settings, like IRQ assignments etc. have to be done through
1.39 angelos 245: Windows.</p>
246:
247: <p>You can get the serial and infrared ports to be recognized
248: as com* devices by playing with the IRQ assignments in
249: Windows. Likewise for the parallel port (it's lpt2).</p>
250:
251: <p>You will need this line in your kernel configuration file for
252: APM to work at all:</p>
253:
254: <pre>
255: option APM_DISABLE_INTERRUPTS=0
256: </pre>
257:
258: <p>Hibernation (save to disk) works fine as long as you have a
259: Windows partition with enough disk space (a bit more than the
260: system memory). Suspend/resume/powerdown all work fine;
261: however, doing hibernation while in X windows (tested in
262: XFree86 3.3.6) causes framebuffer corruption and it seems that
263: the only way to recover is to exit and restart the X server;
264: switching virtual terminals doesn't fix it. It has been
265: suggested that switching between different resolutions might
266: fix it. XFree86 4.0 fixes that problem, but last I checked did
267: not have accelerated support for the driver. The best
268: work-around is to switch to text mode before hibernating.</p>
269:
270: <p>If you enable the external monitor (Fn+F7), XFree86 3.3.6
271: goes into some weird rainbow pattern and eventually freezes
272: the system (unless you switch to text mode or otherwise kill
273: the server within a few seconds); if you switch to text mode,
274: you have to kill the X server (switching back to graphics mode
275: will cause a crash). Enabling the external monitor while in
276: video mode causes no side effects; you can then start X or
277: switch to it if it's already running.</p>
278:
1.50 horacio 279: <p>The <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=clcs&sektion=4">clcs(4)</a> driver is somewhat flakey, so you're best off
1.39 angelos 280: disabling it. It doesn't really matter though since the
1.50 horacio 281: soundblaster (<a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sb&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Curren&arch=i386">sb(4)</a>) will attach and work fine. You may have to play with IRQ assignments
282: to get that to work.</p>
1.1 deraadt 283:
1.34 nate 284: An XF86Config file can be found
285: <a href="xf86configs/thinkpad770z">here</a>.<p>
1.12 chris 286:
1.1 deraadt 287: Contact <a href=mailto:angelos@openbsd.org>Angelos Keromytis</a>.
288: </td>
289: </tr><tr>
290: <td>
1.43 angelos 291: IBM Thinkpad A21p
292: </td><td>
293: See the entry for the T21. Everything is the same except for
294: the video card, which is an ATI Rage 128 Mobility LF. OpenBSD
295: 2.8 post mid-December with XFree86 4.0.2 works great at
296: 1600x1200 24bpp. You need to:
297: <pre>
298: sysctl -w machdep.allowaperture=2
299: </pre>
300: and enter the correct frequency ranges in the Monitor section
301: of XF86Config. Here's a sample working
302: <a href="xf86configs/thinkpada21p">XF86Config.</a>
303: </td>
304: </tr><tr>
305: <td>
1.39 angelos 306: IBM Thinkpad T21
307: </td><td>
308: <p>As of OpenBSD 2.8, everything works fine.</p>
309:
310: <p>Here is the fdisk output; the easiest way of getting there is
311: to resize the Windows partition (I use PartitionMagic) and move
312: it to the end of the disk, then create an OpenBSD partition
313: (and ignore the partition resizing fdisk does -- just go ahead
314: and create all the filesystems you need with disklabel).</p>
315:
316: <pre>
317: Starting Ending
318: #: id cyl hd sec - cyl hd sec [ start - size]
319: -------------------------------------------------------------------------
1.50 horacio 320: 0: 1C 1023 1 1 - 1023 239 63 [ 42003423 - 20502657] <Unknown ID>
1.39 angelos 321: *1: A6 0 1 1 - 1021 239 63 [ 63 - 15452577] OpenBSD
322: 2: 00 0 0 1 - 0 0 0 [ 0 - 0] unused
323: 3: 00 0 0 1 - 0 0 0 [ 0 - 0] unused
324: </pre>
325:
326: <p>To get it to see the serial and infrared ports (both as com*
327: devices), you need to play with the IRQ assignments in the
328: BIOS; just set them to the default values as found in the
329: GENERIC config file. Likewise for the parallel port (OpenBSD
330: can see lpt2). You may have to play with the Windows
331: assignments for this as well.</p>
332:
1.44 angelos 333: <p>There's at least two miniPCI cards available at this point:
334: one is an (unsupported) WinModem, and the other is a combo
335: ethernet/modem card. The ethernet works just fine (detected
336: as an fxp/inphy card); the modem looks like it's a real one,
337: but it's not yet supported.</p>
1.39 angelos 338:
339: <p>Sound (CS4614) works fine. To avoid system freeze when using
1.44 angelos 340: Cardbus and audio simultaneously, you *may* need to set at least
341: two IRQs for use by PCI devices, in the BIOS; I use 9 and 11. It
342: is also necessary to turn off PCI Power Management in the BIOS
343: Power configuration (that's the only menu that scrolls, so make
344: sure you go to the bottom of the page :-)</p>
1.39 angelos 345:
1.41 angelos 346: <p>APM works except for hibernation (requires OS support). To
347: get "halt -p" to work, you must set the sysctl variable
348: machdep.apmhalt to 1 (you need OpenBSD 2.8-current with
349: sources from mid-January, or later). You will need this line
350: in your kernel configuration file for APM to work at all:</p>
1.39 angelos 351:
352: <pre>
353: option APM_DISABLE_INTERRUPTS=0
354: </pre>
355:
356: <p>Although the video card is supposed to work with XFree86
357: 3.3.6pl8, I've only managed to get it to work with XFree86
358: 4.0.1 with the patches found <a
359: href="http://www.probo.com/timr/savagemx.html">here</a> (you
360: can also find binaries of the driver for OpenBSD 2.8 at the
1.40 angelos 361: same location). You need to have a kernel with "option
1.39 angelos 362: INSECURE" and set the securelevel to -1 in /etc/rc.securelevel
363: (so the X server can open /dev/mem and mmap() the BIOS). In
1.46 angelos 364: this configuration, it can do 1400x1050 at 16bpp (version 1.1.13
365: of the savage driver works fine at 24bpp as well).</p>
1.39 angelos 366:
1.41 angelos 367: <p><b>UPDATE:</b> The above-mentioned patches have been
368: included in XFree86 4.0.2, and work out of the box. You don'
369: need a kernel with the option INSECURE set, just set the
1.40 angelos 370: machdep.allowaperture sysctl variable to 2, typically in
371: /etc/sysctl.conf, if you have an OpenBSD 2.8 (or later) built
372: from sources updated after December 15th 2000.</p>
373:
1.39 angelos 374: <p>Note that some models only do 1024x768. Those that do
375: 1400x1050, can also do 1600x1200 using a virtual screen
376: (wherein the whole display shifts as you go "off-screen"); I
377: have not tested whether that works (it does in Windows).</p>
378:
379: <p>If you close the lid of the laptop, the system suspends;
380: under XFree86 4.0, resuming works fine with respect to the
381: display (XFree86 3.3.6 might not be able to cope with this --
382: it couldn't on the ThinkPad 770Z).</p>
383:
1.49 angelos 384: <p>An XF86Config file for XFree86 4.0 can be found <a
1.39 angelos 385: href="xf86configs/thinkpadt21">here</a>.</p>
386:
1.49 angelos 387: <p><b>UPDATE</b> Apparently, recent T21s have the ATI Rage
388: 3D Rage Mobility instead.
389: <a href="xf86configs/thinkpadt21-2">Here's</a> an XF86Config
390: for XFree86 4.0 for this configuration.</p>
391:
1.40 angelos 392: <p>One annoying thing is when you take out one of the UltraBay
393: 2000 devices; the system starts beeping. The only way to make it
394: stop is to suspend and then plug in a device in the UltraBay (not
395: necessarily the same one). Note that hot-swap of UltraBay 2000
396: devices is not currently supported in OpenBSD (as of 2.8), thus
397: it's only safe to hot-swap batteries.</p>
398:
1.39 angelos 399: <p>Contact <a href=mailto:angelos@openbsd.org>Angelos Keromytis</a>.</p>
400: </td>
401: </tr><tr>
402: <td>
1.1 deraadt 403: IBM Thinkpad 760
404: </td><td>
405: As of OpenBSD 2.6, XFree86 and APM do not work.<p>
406:
407: Newer versions of XFree86 support X, and patches are available.<p>
408:
409: MWave modem/sound does not work.<p>
410:
411: APM has been fixed post-2.6 as well, and patches are forthcoming.<p>
412:
413: Contact <a href=mailto:todd@openbsd.org>Todd Fries</a>.
414: </td>
415: </tr><tr>
416: <td>
1.27 marc 417: IBM Thinkpad T20
418: </td><td>
1.42 marc 419: Running OpenBSD 2.7 (and later) apm mostly works. To
420: get "halt -p" to work, you must set the sysctl variable
421: machdep.apmhalt to 1 (you need OpenBSD 2.8-current with
422: sources from mid-January, or later). The unit goes into
423: suspend mode when top is closed. Restores nicely
1.27 marc 424: when top opened.<p>
425:
426: Built in modem is a winmodem... ignore it. Actually it is on
427: a `mini-pci' card so it can probably be removed.<p>
428:
1.30 marc 429: Audio works, but you have to turn off PCI sleep mode in the BIOS.<p>
1.27 marc 430:
1.36 marc 431: OpenBSD X11 supports this machine as of 2.8, but there is lots
1.47 marc 432: of visual noise at 32bpp. Image is fine at 16 bpp. XF4 config
433: file for OpenBSD 2.9 can be found
434: <a href="xf86configs/thinkpadt20">here</a><p>
1.36 marc 435:
1.28 marc 436: See <a href="http://www.snafu.org/t20/">http://www.snafu.org/t20/</a>
1.36 marc 437: for more info.<p>
1.28 marc 438:
1.27 marc 439: Contact <a href=mailto:marc@snafu.org>Marco S Hyman</a>.
440: </td>
1.54 ian 441: </tr>
442: <tr>
443: <td>
444: NEC Versa 2000
445: </td><td>
446: APM works fully.<p>
447:
448: Everything on the machine works.<p>
449:
450: Contact <a href=mailto:mickey@openbsd.org>Michael Shalayeff</a>.
451: </td>
452: </tr>
453: <tr>
454: <td>
455: Siemens SCENIC Mobile 360
456: </td><td>
457: APM works fully.<p>
458:
459: Sound works, using OSS.<p>
460:
461: Contact <a href=mailto:b1000@softhome.net>Dan Carlsson</a>.
462: </td>
463: </tr>
464: <tr>
465: <td>
466: Sony VAIO F430
467: </td><td>
468: As of OpenBSD 2.6-Current (Feb 17/00)<P>
469:
470: APM: "<strong>zzz</strong>" suspend works, as does the keyboard
471: suspend. "<strong>halt -p</strong>" and "<strong>apm -S</strong>"
472: don't. (but I've yet to look for phdisk utilities below - will be
473: investigating shortly.) <P>
474:
475: DVD drive, floppy all function. Ethernet works after wakeup with
476: the card I'm using (3Com 3c589). <P>
477:
478: Contact <a href=mailto:beck@openbsd.org>Bob Beck</a>.
479: </td>
480: </tr>
481: <tr>
482: <td>
483: Sony VAIO z505r
484: </td><td>
485: APM support: "<strong>zzz</strong>", suspend via keyboard, hibernation
486: via keyboard, and "<strong>halt -p</strong>" all work.
487: "<strong>apm -S</strong>" wakes up immediately.<p>
488:
489: Hibernation uses a block at the end of the disk, approximately
490: 3-5MB larger than the memory in your machine. To repair hibernation,
491: use "<strong>phdisk.exe /create /partition</strong>" to setup the
492: partition. The phdisk program is available on the boot
493: floppy image provided on the first recovery CD.<p>
494:
495: Built-in ethernet works fine, but occasionally requires reset
496: after suspend using
497: "<strong>ifconfig fxp0 down; ifconfig fxp0 up</strong>".<p>
498:
499: After a suspend, the profiling clock is not running. Patches are
500: being worked on.<p>
501:
502: Sound is supported using the <a
503: href="http://www.openbsd.org/cgi-bin/man.cgi?query=neo&sektion=4">
504: neo(4)</a> device driver. Sometimes upon boot, a hang happens
505: when trying to determine the AC97 mixer type.<p>
506:
507: When the memory stick slot is empty, it can cause errors which overflow
508: the dmesg buffer, and thus confuse the OpenBSD install program.
509: The BIOS Setup, (accessed using F2), has an option to disable the
510: memory stick.<p>
511:
512: An XF86Config file suitable for use with XFree86 3.3.X may be
513: found <a href="xf86configs/vaioz505r">here</a>.
514: <p>
515:
516: Contact <a href=mailto:deraadt@openbsd.org>Theo de Raadt</a>.
517: </td>
518: </tr>
519: <tr>
520: <td>
521: Sony VAIO z505s
522: </td><td>
523: Similar to the VAIO z505r, except that the provided USB floppy has
524: some problems.<p>
525: Contact <a href=mailto:provos@openbsd.org>Niels Provos</a>.
526: </td>
1.27 marc 527: </tr><tr>
528: <td>
1.54 ian 529: Sony VAIO 747</td>
530: </td><td>
531: Ever since OpenBSD 2.6, XFree86 and APM do work.<p>
532:
1.58 jsyn 533: Ships with a PCMCIA modem card (COM One MCC220 Platinum Card), which works.<p>
1.54 ian 534:
535: Sound works (8 bit only).<p>
536:
537: APM behaviour similar to the VAIO z505r,
538: except that hibernation has not been tested.<p>
539:
540: USB does not work.<p>
541:
542: An XF86Config file can be found
543: <a href="xf86configs/vaio747">here</a>.<p>
544:
545: Contact <a href=mailto:markus@openbsd.org>Markus Friedl</a>.
546: </td>
547: </tr>
548: <tr>
549: <td>
550: Sony VAIO PCG 505-FX
551: </td><td>
552: Unknown.
553: </td>
554: </tr>
555: <tr>
556: <td>Sony VAIO PCG XG700K</td>
557: <td>
1.57 ian 558: <p>OpenBSD 2.9 works but had some problems with disklabel/fdisk,
559: similar to those reported for Thinkpad T21.
560: <p>Requires sysctl machdep.apmhalt=1 in order to power off.
1.54 ian 561:
562: <p>apm -z only puts the system into light sleep
563: (this may be fixable with phdisk); apm -s does nothing.
564:
565: <p>XFree86 4.0 using the S3 savage driver works fine at 1024x768.
566: 1200x1024 should be possible but I haven't tried it.
567: My XF86Config for XFree86 4.0 may be found
568: <a href="xf86configs/vaioxg700k">here</a>.
569:
1.56 ian 570: <p>Sound and USB work nicely.
1.54 ian 571:
572: <p>All three cardbus slots are configured when docked (two when undocked).
573: Sometimes locks up when removing my cheap NE card.
574:
575: <p>The internal WinModem is not supported, nor is there yet
576: any support for Firewire or the "Jog Dialer".
577:
578: <p>Contact Ian Darwin.
579: </td>
580: </tr>
581: <tr>
582: <td>
1.11 millert 583: Toshiba Libretto 50CT
584: </td><td>
585: APM works but you need to be careful not to use the last
586: 32meg or so of the disk since that's where the BIOS dumps
587: the long time hibernation image. You can take a look at
588: the bios geometry in disklabel to see exactly how many sectors
589: it wants. Failure to do so will cause filesystem corruption
590: during suspend.
591: <p>
1.50 horacio 592: The libretto uses a single IRQ for both
593: <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sb&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">sb(4)</a>
594: and <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wss&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">wss</a>
595: so the best thing to do is to choose one and disable the other
596: in the kernel.
1.11 millert 597: The pcmcia external floppy drive is not currently supported
598: by OpenBSD, but it can be used during the install.
599: <p>
600: Installation can be a bit tricky with only a single pcmcia
601: slot. The best way to do this is to do a network install.
602: To do this, load the boot floppy and at the boot prompt,
603: enter <em>boot -c</em>. When you see the <em>UKC</em>
604: prompt, unplug the floppy drive, plug in your network card,
605: and then type exit. The kernel will then probe the network
606: card and you should be able to do a normal network install.
607: You may find it necessary to disable the sound devices in
608: the BIOS in order for the boot floppy to correctly detect
609: your network card.
610: <p>
1.62 ! millert 611: There are sample XF86Config files for both
! 612: <a href="xf86configs/libretto50ct">XFree86 4.X</a> and
! 613: <a href="xf86configs/libretto50ct-xf3">XFree86 3.3.X</a>.
1.18 millert 614: <p>
1.11 millert 615: Contact <a href=mailto:millert@openbsd.org>Todd Miller</a>.
616: </td>
617: </tr><tr>
618: <td>
1.20 millert 619: Toshiba Libretto 100CT
620: </td><td>
621: Most of the information listed in the Libretto 50CT entry
622: apply to the 100CT as well.
623: <p>
1.62 ! millert 624: X11 works in 800x400 mode. There are sample XF86Config files for both
! 625: <a href="xf86configs/libretto100ct">XFree86 4.X</a> and
! 626: <a href="xf86configs/libretto100ct-xf3">XFree86 3.3.X</a>.
1.20 millert 627: <p>
1.27 marc 628: Contact <a href=mailto:millert@openbsd.org>Todd Miller</a>.
1.20 millert 629: </td>
630: </tr><tr>
631: <td>
1.1 deraadt 632: Toshiba Portege 660CDT
633: </td><td>
634: APM is completely broken.<p>
635:
1.50 horacio 636: The mixed <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=sb&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">sb(4)</a>
637: and <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=wss&sektion=4%2fi386&apropos=0&manpath=OpenBSD+Current&arch=i386">wss(4)</a> sound
1.1 deraadt 638: hardware can cause some grief. Newer versions of the flash
639: BIOS are worse, since they are less flexible about what interrupts
640: they allow.<p>
641:
642: Contact <a href=mailto:deraadt@openbsd.org>Theo de Raadt</a>.
643: </td>
1.54 ian 644: </tr>
645: <tr>
1.6 ericj 646: <td>
647: Toshiba Tecra 500CS
648: </td><td>
1.7 brad 649: APM is broken, However it <b>halt -p</b> does work.<p>
1.6 ericj 650:
1.7 brad 651: Sound works by default with the GENERIC kernel, but with the speakers
652: is not really worth it. X runs nicely as well.<p>
1.6 ericj 653:
1.7 brad 654: Contact <a href=mailto:ericj@monkey.org>Eric Jackson</a>.
1.6 ericj 655: </td>
1.7 brad 656: </tr><tr>
657: <td>
658: Toshiba Tecra 500CDT
659: </td><td>
1.14 d 660: APM is completely broken (and can trash your disk).<p>
661:
662: XFree86 works (800x600 16bpp).<p>
1.7 brad 663:
1.14 d 664: Sound works (21739 Hz, half duplex stereo).<p>
1.7 brad 665:
1.14 d 666: <!-- Serial IR is said to work, needs verification. -->
1.7 brad 667:
1.14 d 668: Contact <a href=mailto:brad@openbsd.org>Brad Smith</a>,
669: or <a href=mailto:d@openbsd.org>David Leonard</a>.
1.7 brad 670: </td>
1.10 aaron 671: </tr><tr>
672: <td>
673: Toshiba Tecra 550CDT
674: </td><td>
675: APM deep sleep (<b>zzz</b>) works, but <b>-S</b> wakes up immediately.<p>
676:
677: XFree86 works beautifully.<p>
678:
679: Sound works, after some IRQ tinkering in the BIOS.<p>
680:
1.50 horacio 681: USB works; at least, I plugged a digital camera in, and the
682: <a href="http://www.openbsd.org/cgi-bin/man.cgi?query=ugen&sektion=4">ugen(4)</a> driver detected and configured it.<p>
1.10 aaron 683:
1.16 aaron 684: The built-in modem does not work since it requires software only available in Windows; that is, it does not implement a true RS232 communication port.<p>
1.10 aaron 685:
686: The pcic is broken in this machine, so I cannot accurately comment on PCMCIA attach/detach.<p>
687:
688: Contact <a href=mailto:aaron@openbsd.org>Aaron Campbell</a>.
689: </td>
1.54 ian 690: </tr>
1.1 deraadt 691: </table>
692:
693: <hr>
1.52 brad 694: <a href=i386.html><img height=24 width=24 src=back.gif border=0 alt=OpenBSD></a>
1.1 deraadt 695: <a href=mailto:www@openbsd.org>www@openbsd.org</a>
696: <br>
1.62 ! millert 697: <small>$OpenBSD: i386-laptop.html,v 1.61 2001/08/28 21:36:35 horacio Exp $</small>
1.1 deraadt 698:
699: </body>
700: </html>