-The Amiga port is basically the same as the NetBSD/amiga port
-but with some additions. The major changes are:
+OpenBSD/amiga runs on the Amiga machines manufactured by Commodore.
+It requires a Motorola 68020 or better processor, with an external Motorola
+68851 PMMU in case of a 68020.
+This leaves out models 500, 600 and 1000 which can not receive accelerator
+boards.
-
-
New interrupt remapping system.
-
Support for using ISA peripherals via a bridgecard.
-
Supports GG2 Bus
-(aka GoldenGate II) and CrossLink bridgecards
-(Neither of these support ISA DMA thus no PC floppy support)
-
Tested ISA devices are
-
-
com (Standard PC serial ports)
-
lpt (Standard PC parallel ports)
-
ast (AST 4-port serial card)
-
wd (IDE harddisk)
-
acd (IDE ATAPI CD, both data & audio support)
-
if_ed, although named if_isaed due to name clash
-(dp8390 based ethernet cards, like 3c503, NE2000 & SMC Ultra).
-
-Others should port easily as long as DMA isn't necessary.
-
SunOS emulation can use shared libraries on the '040
-
Understand BSD disklabels if Amiga RDB partitioning is not found.
-
Ramdisk device for easy installs
-
+
+The OpenBSD/amiga port has been
+discontinued after the 3.2 release.
+
-
Supported devices include:
+
+There is currently no one working on bringing this port back to life.
+The source code is still available in the CVS Attic, and code can be found in
+NetBSD as well.
+If you are interested in reviving the amiga port, make it work and contact
+Niklas Hallqvist.
+
ISA bridges: If you use one of these bridges, and you have
- success with a device not listed below, please inform us.
-
-
The GoldenGate Bus+ (aka GG2).
-
The CrossLink.
-
+
+
+
History:
-
ISA IDE & ATAPI with a supported ISA bridge.
+
+The OpenBSD/amiga was initially derived from NetBSD/amiga in 1995, and
+used to loosely track the NetBSD changes until 1998. Niklas Hallqvist also
+wrote a new interrupt remapping system, improving average performance,
+revamped the installation media, and ported the ISA bus support to a
+big-endian platform, for GoldenGate II and CrossLink cards.
+
-
SCSI host adapters:
-
-
33c93 based boards: A2091, A3000 and GVP series II.
-
53c80 based boards: 12 Gauge, IVS, Emplant and Wordsync/Bytesync.
-
53c710 based boards: A4091, Magnum, Warp Engine, Zeus and DraCo.
-
FAS216 based boards: FastLane Z3, Blizzard.
-
+
+After a few years, due to the lack of users, this port was slowly left in
+oblivion, although releases were still being made. Eventually, it was decided
+to stop supporting it and remove the code from the tree.
+
-
Video controllers:
-
-
ECS, AGA and A2024 built in on various amigas
-
Retina Z2 and Retina Z3.
-
Picasso II.
-
GVP Spectrum.
-
Piccolo.
-
A2410.
-
Cybervision 64.
-
oMnibus.
-
Domino.
-
Merlin.
-
+
+
+
Supported hardware:
-
Ethernet controllers:
-
-
A2065.
-
Hydra.
-
ASDG.
-
A4066.
-
Ariadne I & II.
-
Quicknet.
-
Via a supported ISA bridge:
-
-
NE[12]000
-
SMC/WD 8003/8013/8216
-
3COM 3c503.
-
-
+
+
Supported models
+
-
Arcnet controllers:
-
-
A2060.
-
-
-
Tape drives:
-
-
Most SCSI tape drives.
-
-
-
CD-ROM drives:
-
-
Most SCSI CD-ROM drives.
-
-
-
Serial ports:
-
-
Amiga serial port.
-
DraCo serial port.
-
MultiFaceCard II and III.
-
A2232.
-
PC COM ports attached to a supported ISA bridge.
-
-
-
Parallel ports:
-
-
Amiga parallel port.
-
PC LPT ports attached to a supported ISA bridge.
-
-
-
Amiga floppy drives.
-
Amiga mouse.
-
Amiga-compliant joysticks.
+
+
+
A1200 (requires an accelerator card with 68020+68851 or better)
+
A2000 (requires an accelerator card with 68020+68851 or better)
+
A3000
+
A4000
+
DraCo
+
+
+PowerPC-based accelerator cards are not supported.
+
-
Projects (in no particular order):
+
+
Supported peripherals
+
+
+
-
Repair the AriadneI ethernet driver.
-
Add support for CSMk2/3 scsi controllers.
-
Add support for other amiga hardware.
-
Fix the cpu detection on the BSD-bootblocks for CS060 owners.
-
Write some sort of beginners help for amiga users. (Help wanted)
+
A4000/A1200 on-board IDE controller
+
ISA bridges
+
+
GoldenGate Bus+ (aka GG2)
+
CrossLink
+
+
ISA IDE and ATAPI with a supported ISA bridge
+
SCSI controllers
+
+
33c93 based boards: A2091, A3000 and GVP series II
+
53c80 based boards: 12 Gauge, IVS, Emplant and Wordsync/Bytesync
+
53c710 based boards: A4091, Magnum, Warp Engine, Zeus and DraCo
+