===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/hppa.html,v
retrieving revision 1.27
retrieving revision 1.28
diff -c -r1.27 -r1.28
*** www/hppa.html	1998/12/31 03:24:01	1.27
--- www/hppa.html	1999/03/28 13:59:43	1.28
***************
*** 23,56 ****
  Other similiar to those hardware configurations may be supported
  as far as if they based upon:
  <ul>
! <li>HP PA-RISC 7100, 7150, 7100LC, 7200 processors
! 	(7300 and 7300LC may work too);
  <li>Viper (others ?) memory controller;
! <li>LASI, ASP, WAX GSC bus controller;
  <li>and EISA bus controller;
  <li>NCR53C700, NCR53C710, NCR53C720 SCSI I/O Processor;
  <li>Venom, CRX-8, CRX-24, HCRX-8, HCRX-24 video controllers;
  <li>HIL or PS/2 keyboard and mouse;
  <li>EISA devices will work, but they won't be usefull for booting,
! 	but those manufactured by HP for 700/800 systems.
  </ul>
  Systems which may work (eventualy): 
  <ul>
  <li>HP 9000 834, 835, 836, 844, 845, 846;
  <li>HP 9000 E23, E35, E45, E55;
  <li>HP 3000 908, 918, 928, 938;
! <li>Hitachi VQ200, VQ210, and some workstations;
  <li>Precision Book from RDI Computer Corporation (well, unlikely)
  <li>HP VME and VXI single board systems (requires VME at least)
  </ul>
  <br>
  Hardware is needed for this project,
! see <a href="want.html">"Wanted List"</a>.
! <br>
! <a href=mailto:mickey@openbsd.org>mickey</a>
  
  <h3><strong>Status:</strong></h3>
! Got System autoconfig, heading for single-user.
  
  <h3><strong>History:</strong></h3>
  <ul>
--- 23,55 ----
  Other similiar to those hardware configurations may be supported
  as far as if they based upon:
  <ul>
! <li>HP PA-RISC 70000, 7100, 7150, 7100LC, 7200 processors
! 	(7250 and 7300LC may work too);
  <li>Viper (others ?) memory controller;
! <li>LASI, ASP, WAX bus/IO controller;
  <li>and EISA bus controller;
  <li>NCR53C700, NCR53C710, NCR53C720 SCSI I/O Processor;
  <li>Venom, CRX-8, CRX-24, HCRX-8, HCRX-24 video controllers;
  <li>HIL or PS/2 keyboard and mouse;
  <li>EISA devices will work, but they won't be usefull for booting,
! 	but some of those manufactured by HP for 700/800 systems.
  </ul>
  Systems which may work (eventualy): 
  <ul>
+ <li>pa8k-based systems (in 32-bit mode);
  <li>HP 9000 834, 835, 836, 844, 845, 846;
  <li>HP 9000 E23, E35, E45, E55;
  <li>HP 3000 908, 918, 928, 938;
! <li>Hitachi VQ200, VQ210, and some other non-HP workstations;
  <li>Precision Book from RDI Computer Corporation (well, unlikely)
  <li>HP VME and VXI single board systems (requires VME at least)
  </ul>
  <br>
  Hardware is needed for this project,
! see <a href="want.html">"Wanted List"</a>. (contact <a href=mailto:mickey@openbsd.org>mickey</a>).
  
  <h3><strong>Status:</strong></h3>
! Got System autoconfig using <a href=http://hppa.fries.net/#boot_lif>bootable images</a>, heading for single-user.
  
  <h3><strong>History:</strong></h3>
  <ul>
***************
*** 90,101 ****
  </pre>
  </p>
  <p>
! One will have a <em>boot.lif</em> file to boot then in the obj-directory.
  That image may include <em>diskless</em> kernel image if one was available
  in the <em>sys/arch/hppa/compile/DISKLESS/bsd</em>.
  <br>
  Kernel cross-build process is similiar to the one for boot, consult
! config(8) and options(8) for kernel build options and configuration.
  </p>
  <h4>Recent development:</h4>
  <pre>
--- 89,105 ----
  </pre>
  </p>
  <p>
! One will have a <a href=http://hppa.fries.net/#boot_lif><em>boot.lif</em></a>
! file to boot then in the obj-directory.
  That image may include <em>diskless</em> kernel image if one was available
  in the <em>sys/arch/hppa/compile/DISKLESS/bsd</em>.
  <br>
  Kernel cross-build process is similiar to the one for boot, consult
! <a href=http://www.openbsd.org/cgi-bin/man.cgi?query=config&apropos=0&sektion=0
! &manpath=OpenBSD+Current&format=html>config(8)</a>
! and
! <a href=http://www.openbsd.org/cgi-bin/man.cgi?query=options&apropos=0&sektion=0&manpath=OpenBSD+Current&format=html>options(8)</a>
! for kernel build options and configuration.
  </p>
  <h4>Recent development:</h4>
  <pre>
***************
*** 107,150 ****
  
  
  
! >> OpenBSD/hppa BOOT 0.03
! boot> boot diskless
! booting lf0a:diskless: 827208+101488+155072 total=0x108978 start 0x13000
  
  Copyright (c) 1982, 1986, 1989, 1991, 1993
  The Regents of the University of California.  All rights reserved.
! Copyright (c) 1995-1998 OpenBSD. All right Reserved.  http://www.OpenBSD.org
  
! OpenBSD 2.3 (DISKLESS) #464: Wed Oct 14 19:58:59 EDT 1998
      mickey@lucifier:/sys/arch/hppa/compile/DISKLESS
! HP9000/712/80 (Gekko) rev 4
! real mem = 16777216 (73728 reserved for PROM, 14680064 used by OpenBSD)
! avail mem = 12894208
! using 358 buffers containing 1466368 bytes of memory
! mainbus0 (root)
  pdc0 at mainbus0
! cpu0 at mainbus0 mod 8 "PA-RISC 7100LC"
! cpu0: 80MHz, 128K/128K D/I cache, 120 shared TLB, 8 comb BTLB
! lasi0 at mainbus0 mod 2 "LASI Bus Adapter": hpa 0xf0100000, ver 1.0
! gsc0 at lasi0 mod 2 "gsc"
! "Gekko PS/2 port" at gsc0 (type a, sv 84) mod 12 not configured
! "Gekko PS/2 port" at gsc0 (type a, sv 84) mod 11 not configured
! fdc0 at mainbus0 mod 10 "Gekko PC floppy controller": chip WD37C65C
! "Core audio (type 2, no beeper)" at gsc0 (type a, sv 7b) mod 8 not configured
! lpt0 at gsc0 mod 6 "Core Centronics": polled
! com0 at gsc0 mod 4 "Gekko Core RS232": ns16550a, 16 byte fifo
! "Gekko Core LAN" at gsc0 (type a, sv 8a) mod 2 not configured
! "Gekko Core SCSI" at gsc0 (type a, sv 82) mod 1 not configured
! sti0 at mainbus0 mod 1 "Gekko SGC Graphics": STI type 3
  
  </pre>
  </p>
  <small>info was typed from screen, sorry for typos</small>
  <hr>
  <a href=plat.html><img height=24 width=24 src=back.gif border=0 alt=OpenBSD></a> 
  <a href=mailto:www@openbsd.org>www@openbsd.org</a>
  <br>
! <small>$OpenBSD: hppa.html,v 1.27 1998/12/31 03:24:01 mickey Exp $</small>
  
  </body>
  </html>
--- 111,188 ----
  
  
  
! >> OpenBSD/hppa BOOT 0.04
! boot> boot bsd
! booting lf0a:/bsd: 984296+4296528+165376 total=0x544550 start 0x13000
  
  Copyright (c) 1982, 1986, 1989, 1991, 1993
  The Regents of the University of California.  All rights reserved.
! Copyright (c) 1995-1999 OpenBSD. All right Reserved.  http://www.OpenBSD.org
  
! OpenBSD 2.5-beta (DISKLESS) #1078: Sat Mar 27 23:19:16 EST 1999
      mickey@lucifier:/sys/arch/hppa/compile/DISKLESS
! HP9000/712/80 (King Gecko) PA-RISC 1.1
! real mem = 16777216 (73728 reserved for PROM, 8388608 used by OpenBSD)
! avail mem = 9105408
! using 409 buffers containing 1675264 bytes of memory
! mainbus0 (root) [flex fff80000]
  pdc0 at mainbus0
! mem0 at mainbus0 hpa fffbf000: viper rev 0, ctrl 40400102<eisa_prf>
! cpu0 at mainbus0 hpa fffbe000: level 1, category A, 80 MHz clock
! cpu0: shadows, 128K/128K D/I cache, 64 shared TLB, 8 comb BTLB
! lasi0 at mainbus0 hpa f0100000 irq 28: ver 3.0
! gsc0 at lasi0
! "PS/2 port" at gsc0 (type a, sv 84) hpa f0108100 not configured
! "PS/2 port" at gsc0 (type a, sv 84) hpa f0108000 not configured
! "floppy controller" at gsc0 (type a, sv 83) hpa f010a000 not configured
! "Advanced audio (no beeper)" at gsc0 (type a, sv 7b) hpa f0104000 not configured
! lpt0 at gsc0 hpa f0102000 irq 7
! com0 at gsc0 hpa f0105000 irq 6: ns16550a, 16 byte fifo
! ie0 at gsc0 hp f0107000 irq 8: mem 80e000/0x9b1000 size 4000
! ie0: address 08:00:09:1b:3c:08, type Core LAN
! "Core SCSI" at gsc0 (type a, sv 82) hpa f0106000 not configured
! "GIO Graphics" at mainbus0 (type a, sv 85) hpa f8000000 not configured
  
  </pre>
  </p>
  <small>info was typed from screen, sorry for typos</small>
  <hr>
+ In order to use the <a href=http://hppa.fries.net/#boot_lif>boot.lif</a> files
+ you must prepare your server and instruct your machine to boot off the network:
+ <ol><li>Server setup</li><br>
+   <ul><li>
+ <a href=http://www.openbsd.org/cgi-bin/man.cgi?query=rbootd&apropos=0&sektion=0&manpath=OpenBSD+Current&format=html>rbootd</a> must be setup and started<br>
+     <ul><li><bold>/etc/<a href=http://www.openbsd.org/cgi-bin/man.cgi?query=rbootd&apropos=0&sektion=0&manpath=OpenBSD+Current&format=html>rbootd</a>.conf </bold> contains a single line per machine
+ 		you ented to boot from the server.  Each line contains the
+ 		ethernet address of the client hppa machine, and the filename
+ 		to be loaded from the tftp server.  For example:
+ 	<pre>
+ 	8:0:9:70:c4:11    <a href=#boot_lif>boot.lif</a>    # 9000/720
+ 	8:0:9:19:fb:a0    <a href=#boot_lif>boot.lif</a>    # 9000/725
+ 	</pre>
+ 	</li></ul></li>
+      <li> For further reading on server setup for network booting in general, see also: <a href=http://www.openbsd.org/cgi-bin/man.cgi?query=diskless&apropos=0&sektion=0&manpath=OpenBSD+Current&format=html>diskless(8)</a>.</li>
+  </ul>
+ <li>Client Network Boot</li><br>
+ <ul><li>BOOT_ADMIN <br>
+ 	In order to get to the BOOT_ADMIN prompt, you must hit <em>\<esc\></em> as the
+ 	machine is coming up.  Once it probes bootable devices, type 'a' for
+ 	the 'BOOT_ADMIN' prompt.
+     </li>
+     <li>network boot command <br>
+ 	Once at the 'BOOT_ADMIN' prompt, type:
+ <pre>
+ 	BOOT_ADMIN> boot lan isl
+ </pre>
+ 	... and you are on your way to booting boot.lif!
+     </li>
+ </ul>
+ </ol>
+ <hr>
  <a href=plat.html><img height=24 width=24 src=back.gif border=0 alt=OpenBSD></a> 
  <a href=mailto:www@openbsd.org>www@openbsd.org</a>
  <br>
! <small>$OpenBSD: hppa.html,v 1.28 1999/03/28 13:59:43 todd Exp $</small>
  
  </body>
  </html>