=================================================================== RCS file: /cvsrepo/anoncvs/cvs/www/hppa.html,v retrieving revision 1.44 retrieving revision 1.45 diff -c -r1.44 -r1.45 *** www/hppa.html 2001/05/18 20:48:09 1.44 --- www/hppa.html 2001/06/04 04:42:10 1.45 *************** *** 128,133 **** --- 128,137 ----
+ Currently, the in-tree binutils can't be used to generate cross-tools. + You should use a 2.7 source tree to build them, 2.8 and later will not + work. +
cd /usr/src sudo make TARGET=hppa cross-tools *************** *** 214,235 ****... and you are on your way to booting boot.lif! !
In order to use the boot.lif files you must prepare your server and instruct your machine to boot off the network: !
- Server setup
!!
- ! rbootd must be setup and started
!
!- For further reading on server setup for network booting in general, see also: diskless(8).
!- Client Network Boot
!
- BOOT_ADMIN
In order to get to the BOOT_ADMIN prompt, you must hit \as the machine is coming up. Once it probes bootable devices, type 'a' for the 'BOOT_ADMIN' prompt. --- 218,265 ----
In order to use the boot.lif files you must prepare your server and instruct your machine to boot off the network: !!
- Server setup
!!
!- rbootd must be setup and started.
!
!!
!- /etc/rbootd.conf ! contains a single line per machine you entered to boot from the server. ! Each line contains the ethernet address of the client hppa machine, and ! the filename to be loaded from the tftp server. For example:
!8:0:9:70:c4:11 boot.lif # 9000/720 8:0:9:19:fb:a0 boot.lif # 9000/725!- Recent machines won't look for rbootd at all, but require a ! bootp setup.
!
!!
!- /etc/bootptab contains an information block for each machine. For example: !
!! # 9000/715 ! boron:\ ! ha=0800095f5a6e:\ ! bf=boot.lif:\ ! hd=:\ ! ht=ethernet:\ ! ip=192.168.3.43:\ ! rp=/netboot/boron/root:\ ! sm=255.255.255.0:\ ! td=/tftpboot: !!- Remember you will have to enable bootpd in /etc/inetd.conf, and restart inetd. !
!- For further reading on server setup for network booting in general, see also: diskless(8).
!- Client Network Boot
!!
- BOOT_ADMIN
In order to get to the BOOT_ADMIN prompt, you must hit \as the machine is coming up. Once it probes bootable devices, type 'a' for the 'BOOT_ADMIN' prompt. *************** *** 241,253 ****