===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/hppa.html,v
retrieving revision 1.230
retrieving revision 1.231
diff -u -r1.230 -r1.231
--- www/hppa.html 2009/02/05 20:47:06 1.230
+++ www/hppa.html 2009/02/07 20:54:00 1.231
@@ -129,7 +129,11 @@
dino(4) Dino/Cujo or elroy(4)) Elroy PCI host bridges providing pci(4) PCI busses, supporting most pci(4) cards.
ppb(4) standard PCI-PCI bridges, including PCI expansion backplanes.
cbb(4) YENTA-compatible PCI-CardBus bridges supporting some cardbus(4) and pcmcia(4) cards, on some models.
-siop(4) on-board SCSI controller.
+oosiop(4),
+osiop(4)
+and
+siop(4)
+on-board SCSI controllers.
pciide(4) IDE drive controller supporting wd(4) and cd(4) drives.
dc(4) on-board Digital 10/100Mbit ethernet.
ohci(4) on-board USB controller supporting most usb(4) devices.
@@ -151,15 +155,15 @@
Unsupported systems and devices
The following systems are unsupported, but may eventually be coaxed to life.
+Some of them will boot OpenBSD, but there is not enough device support for
+OpenBSD to be really useful on them.
- PA7100LC-based: Dx00, Dx10
- PA7200-based: Dx50, Dx60
- PA8000-based(in 32-bit mode): Dx70, Dx80/R380, Kx50/Kx60
- PA8200-based(in 32-bit mode): D390/R390, Kx70/Kx80
- HP 9000 E-Class (with limited I/O)
-
- Hitachi VQ200, VQ210, and some other non-HP workstations
-
- Hitachi 9000V 3050RX/* workstations and 3500/* servers
-
- HP VME and VXI single board systems (requires VME at least)
+
- Most Hitachi PA-RISC workstations and servers
@@ -173,7 +177,7 @@
Even though some 64-bit systems are supported by this port in 32-bit mode,
the following models cannot be supported due to the I/O system limitations
-and can only run the
+and will only run the
OpenBSD/hppa64 port:
- PA8500-based: A400/rp24x0, L1000/L2000
@@ -183,26 +187,14 @@
-These Convex systems are NUMA supercomputing clusters
-consisting of one or more 8-way SMP nodes with PA7100 or PA7200 CPUs.
-They are very unlikely to be ever supported.
-
-- Convex Exemplar SPP1000/{CD,XA}
-
- Convex Exemplar SPP1200/{CD,XA}
-
- Convex Exemplar SPP1600/{CD,XA}
-
+Convex PA-RISC systems (NUMA supercomputing clusters
+consisting of one or more 8-way SMP nodes with PA7100 or PA7200 CPUs)
+are unlikely to be ever supported.
-These systems will, probably, never be supported by this port since
-they are of 1.0 PA-RISC architecture, which is substantially
-inferior to the 1.1:
-
-- HP 9000 600, 635, 645
-
- HP 9000 800, 808, 810, 815, 822, 825, 832, 834, 835, 836, 840
-
- HP 9000 842, 844, 845, 846, 850, 852, 855, 860, 865, 870, 890
-
- HP 9000 900, 920, 922, 925, 930, 932, 935, 948, 949, 950,
-
- HP 9000 950S, 955, 958, 960, 980, 990, 992
-
+All other HP 9000 6xx, 8xx and 9xx server systems will probably never
+be supported by this port since they are of 1.0 PA-RISC architecture,
+which is substantially inferior to the 1.1.
Unsupported peripherals
@@ -318,6 +310,6 @@
www@openbsd.org
-$OpenBSD: hppa.html,v 1.230 2009/02/05 20:47:06 miod Exp $
+$OpenBSD: hppa.html,v 1.231 2009/02/07 20:54:00 miod Exp $