===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/hppa.html,v
retrieving revision 1.27
retrieving revision 1.28
diff -u -r1.27 -r1.28
--- www/hppa.html	1998/12/31 03:24:01	1.27
+++ www/hppa.html	1999/03/28 13:59:43	1.28
@@ -23,34 +23,33 @@
 Other similiar to those hardware configurations may be supported
 as far as if they based upon:
 <ul>
-<li>HP PA-RISC 7100, 7150, 7100LC, 7200 processors
-	(7300 and 7300LC may work too);
+<li>HP PA-RISC 70000, 7100, 7150, 7100LC, 7200 processors
+	(7250 and 7300LC may work too);
 <li>Viper (others ?) memory controller;
-<li>LASI, ASP, WAX GSC bus controller;
+<li>LASI, ASP, WAX bus/IO controller;
 <li>and EISA bus controller;
 <li>NCR53C700, NCR53C710, NCR53C720 SCSI I/O Processor;
 <li>Venom, CRX-8, CRX-24, HCRX-8, HCRX-24 video controllers;
 <li>HIL or PS/2 keyboard and mouse;
 <li>EISA devices will work, but they won't be usefull for booting,
-	but those manufactured by HP for 700/800 systems.
+	but some of those manufactured by HP for 700/800 systems.
 </ul>
 Systems which may work (eventualy): 
 <ul>
+<li>pa8k-based systems (in 32-bit mode);
 <li>HP 9000 834, 835, 836, 844, 845, 846;
 <li>HP 9000 E23, E35, E45, E55;
 <li>HP 3000 908, 918, 928, 938;
-<li>Hitachi VQ200, VQ210, and some workstations;
+<li>Hitachi VQ200, VQ210, and some other non-HP workstations;
 <li>Precision Book from RDI Computer Corporation (well, unlikely)
 <li>HP VME and VXI single board systems (requires VME at least)
 </ul>
 <br>
 Hardware is needed for this project,
-see <a href="want.html">"Wanted List"</a>.
-<br>
-<a href=mailto:mickey@openbsd.org>mickey</a>
+see <a href="want.html">"Wanted List"</a>. (contact <a href=mailto:mickey@openbsd.org>mickey</a>).
 
 <h3><strong>Status:</strong></h3>
-Got System autoconfig, heading for single-user.
+Got System autoconfig using <a href=http://hppa.fries.net/#boot_lif>bootable images</a>, heading for single-user.
 
 <h3><strong>History:</strong></h3>
 <ul>
@@ -90,12 +89,17 @@
 </pre>
 </p>
 <p>
-One will have a <em>boot.lif</em> file to boot then in the obj-directory.
+One will have a <a href=http://hppa.fries.net/#boot_lif><em>boot.lif</em></a>
+file to boot then in the obj-directory.
 That image may include <em>diskless</em> kernel image if one was available
 in the <em>sys/arch/hppa/compile/DISKLESS/bsd</em>.
 <br>
 Kernel cross-build process is similiar to the one for boot, consult
-config(8) and options(8) for kernel build options and configuration.
+<a href=http://www.openbsd.org/cgi-bin/man.cgi?query=config&apropos=0&sektion=0
+&manpath=OpenBSD+Current&format=html>config(8)</a>
+and
+<a href=http://www.openbsd.org/cgi-bin/man.cgi?query=options&apropos=0&sektion=0&manpath=OpenBSD+Current&format=html>options(8)</a>
+for kernel build options and configuration.
 </p>
 <h4>Recent development:</h4>
 <pre>
@@ -107,44 +111,78 @@
 
 
 
->> OpenBSD/hppa BOOT 0.03
-boot> boot diskless
-booting lf0a:diskless: 827208+101488+155072 total=0x108978 start 0x13000
+>> OpenBSD/hppa BOOT 0.04
+boot> boot bsd
+booting lf0a:/bsd: 984296+4296528+165376 total=0x544550 start 0x13000
 
 Copyright (c) 1982, 1986, 1989, 1991, 1993
 The Regents of the University of California.  All rights reserved.
-Copyright (c) 1995-1998 OpenBSD. All right Reserved.  http://www.OpenBSD.org
+Copyright (c) 1995-1999 OpenBSD. All right Reserved.  http://www.OpenBSD.org
 
-OpenBSD 2.3 (DISKLESS) #464: Wed Oct 14 19:58:59 EDT 1998
+OpenBSD 2.5-beta (DISKLESS) #1078: Sat Mar 27 23:19:16 EST 1999
     mickey@lucifier:/sys/arch/hppa/compile/DISKLESS
-HP9000/712/80 (Gekko) rev 4
-real mem = 16777216 (73728 reserved for PROM, 14680064 used by OpenBSD)
-avail mem = 12894208
-using 358 buffers containing 1466368 bytes of memory
-mainbus0 (root)
+HP9000/712/80 (King Gecko) PA-RISC 1.1
+real mem = 16777216 (73728 reserved for PROM, 8388608 used by OpenBSD)
+avail mem = 9105408
+using 409 buffers containing 1675264 bytes of memory
+mainbus0 (root) [flex fff80000]
 pdc0 at mainbus0
-cpu0 at mainbus0 mod 8 "PA-RISC 7100LC"
-cpu0: 80MHz, 128K/128K D/I cache, 120 shared TLB, 8 comb BTLB
-lasi0 at mainbus0 mod 2 "LASI Bus Adapter": hpa 0xf0100000, ver 1.0
-gsc0 at lasi0 mod 2 "gsc"
-"Gekko PS/2 port" at gsc0 (type a, sv 84) mod 12 not configured
-"Gekko PS/2 port" at gsc0 (type a, sv 84) mod 11 not configured
-fdc0 at mainbus0 mod 10 "Gekko PC floppy controller": chip WD37C65C
-"Core audio (type 2, no beeper)" at gsc0 (type a, sv 7b) mod 8 not configured
-lpt0 at gsc0 mod 6 "Core Centronics": polled
-com0 at gsc0 mod 4 "Gekko Core RS232": ns16550a, 16 byte fifo
-"Gekko Core LAN" at gsc0 (type a, sv 8a) mod 2 not configured
-"Gekko Core SCSI" at gsc0 (type a, sv 82) mod 1 not configured
-sti0 at mainbus0 mod 1 "Gekko SGC Graphics": STI type 3
+mem0 at mainbus0 hpa fffbf000: viper rev 0, ctrl 40400102<eisa_prf>
+cpu0 at mainbus0 hpa fffbe000: level 1, category A, 80 MHz clock
+cpu0: shadows, 128K/128K D/I cache, 64 shared TLB, 8 comb BTLB
+lasi0 at mainbus0 hpa f0100000 irq 28: ver 3.0
+gsc0 at lasi0
+"PS/2 port" at gsc0 (type a, sv 84) hpa f0108100 not configured
+"PS/2 port" at gsc0 (type a, sv 84) hpa f0108000 not configured
+"floppy controller" at gsc0 (type a, sv 83) hpa f010a000 not configured
+"Advanced audio (no beeper)" at gsc0 (type a, sv 7b) hpa f0104000 not configured
+lpt0 at gsc0 hpa f0102000 irq 7
+com0 at gsc0 hpa f0105000 irq 6: ns16550a, 16 byte fifo
+ie0 at gsc0 hp f0107000 irq 8: mem 80e000/0x9b1000 size 4000
+ie0: address 08:00:09:1b:3c:08, type Core LAN
+"Core SCSI" at gsc0 (type a, sv 82) hpa f0106000 not configured
+"GIO Graphics" at mainbus0 (type a, sv 85) hpa f8000000 not configured
 
 </pre>
 </p>
 <small>info was typed from screen, sorry for typos</small>
 <hr>
+In order to use the <a href=http://hppa.fries.net/#boot_lif>boot.lif</a> files
+you must prepare your server and instruct your machine to boot off the network:
+<ol><li>Server setup</li><br>
+  <ul><li>
+<a href=http://www.openbsd.org/cgi-bin/man.cgi?query=rbootd&apropos=0&sektion=0&manpath=OpenBSD+Current&format=html>rbootd</a> must be setup and started<br>
+    <ul><li><bold>/etc/<a href=http://www.openbsd.org/cgi-bin/man.cgi?query=rbootd&apropos=0&sektion=0&manpath=OpenBSD+Current&format=html>rbootd</a>.conf </bold> contains a single line per machine
+		you ented to boot from the server.  Each line contains the
+		ethernet address of the client hppa machine, and the filename
+		to be loaded from the tftp server.  For example:
+	<pre>
+	8:0:9:70:c4:11    <a href=#boot_lif>boot.lif</a>    # 9000/720
+	8:0:9:19:fb:a0    <a href=#boot_lif>boot.lif</a>    # 9000/725
+	</pre>
+	</li></ul></li>
+     <li> For further reading on server setup for network booting in general, see also: <a href=http://www.openbsd.org/cgi-bin/man.cgi?query=diskless&apropos=0&sektion=0&manpath=OpenBSD+Current&format=html>diskless(8)</a>.</li>
+ </ul>
+<li>Client Network Boot</li><br>
+<ul><li>BOOT_ADMIN <br>
+	In order to get to the BOOT_ADMIN prompt, you must hit <em>\<esc\></em> as the
+	machine is coming up.  Once it probes bootable devices, type 'a' for
+	the 'BOOT_ADMIN' prompt.
+    </li>
+    <li>network boot command <br>
+	Once at the 'BOOT_ADMIN' prompt, type:
+<pre>
+	BOOT_ADMIN> boot lan isl
+</pre>
+	... and you are on your way to booting boot.lif!
+    </li>
+</ul>
+</ol>
+<hr>
 <a href=plat.html><img height=24 width=24 src=back.gif border=0 alt=OpenBSD></a> 
 <a href=mailto:www@openbsd.org>www@openbsd.org</a>
 <br>
-<small>$OpenBSD: hppa.html,v 1.27 1998/12/31 03:24:01 mickey Exp $</small>
+<small>$OpenBSD: hppa.html,v 1.28 1999/03/28 13:59:43 todd Exp $</small>
 
 </body>
 </html>