===================================================================
RCS file: /cvsrepo/anoncvs/cvs/www/i386.html,v
retrieving revision 1.44
retrieving revision 1.45
diff -u -r1.44 -r1.45
--- www/i386.html	1997/10/11 19:13:07	1.44
+++ www/i386.html	1997/10/11 19:21:05	1.45
@@ -97,11 +97,18 @@
   <ul>
   <li> Adaptec AHA-154xA, -B, -C, and -CF
   <li> Adaptec AHA-174x
-  <li> Adaptec AIC-6260 and AIC-6360 based boards, including the Adaptec AHA-152x and the SoundBlaster SCSI host adapter.  (Note that you cannot boot from these boards if they do not have a boot ROM; only the AHA-152x and motherboards using this chip are likely to be bootable, consequently.)
-  <li> Adaptec AIC-7770-based SCSI host adapters (including the Adaptec AHA-274x, AHA-284x families).
-  <li> Adaptec AHA-294x[W] cards and some onboard PCI designs using the AIC7870 chip.  This driver does *not* currently work with non-PCI AIC-7xxx boards or the Adaptec 3940.
+  <li> Adaptec AIC-6260 and AIC-6360 based boards, including the
+	Adaptec AHA-152x and the SoundBlaster SCSI host adapter.
+	(Note that you cannot boot from these boards if they do not have
+	a boot ROM; only the AHA-152x and motherboards using this chip
+	are likely to be bootable, consequently.)
+  <li> Adaptec AIC-7770-based SCSI host adapters (including the
+	Adaptec AHA-274x, AHA-284x families).
+  <li> Adaptec AHA-[23]94x[W] cards and some onboard PCI designs using the
+	AIC7870 chip.
   <li> Buslogic 54x (Adaptec AHA-154x clones; driver on kcadp floppy)
-  <li> BusLogic 445, 74x, 9xx  (But not the new "FlashPoint" series of BusLogic SCSI adapters)
+  <li> BusLogic 445, 74x, 9xx  (But not the new "FlashPoint" series
+	of BusLogic SCSI adapters)
   <li> Symbios Logic (NCR) 53C8xx-based PCI SCSI host adapters
   <li> Ultrastor 14f, 34f, and (possibly) 24f
   <li> Seagate/Future Domain ISA SCSI adapter cards, including
@@ -110,9 +117,13 @@
     <li> Future Domain TMC-885
     <li> Future Domain TMC-950
     </ul>
+  <li> WD-7000 SCSI host adapters.
   </ul>
  
-<li> MDA, CGA, VGA, SVGA, and HGC Display Adapters.  (Note that not all of the display adapters OpenBSD/i386 can work with are supported by X.  See the XFree86 FAQ for more information.)
+<li> MDA, CGA, VGA, SVGA, and HGC Display Adapters.
+	(Note that not all of the display adapters OpenBSD/i386
+	can work with are supported by X.
+	See the XFree86 FAQ for more information.)
 
 <li> Serial ports:
   <ul>
@@ -130,7 +141,7 @@
   
 <li> ATM cards -- some. Mail chuck@openbsd.org to get this entry updated.
 
-<li> Digital DEFPA PCI FDDI adapters (support barely missed this release; it works in other ports, and will work in this one in the next release)
+<li> Digital DEFPA PCI FDDI adapters.
 
 <li> Ethernet adapters:
   <ul>
@@ -176,12 +187,15 @@
   <ul>
   <li> Most SCSI tape drives
   <li> Most SCSI tape changers
-  <li> QIC-02 and QIC-36 format (Archive- and Wangtek- compatible) tape drives <sup>(1) (2)</sup>
+  <li> QIC-02 and QIC-36 format (Archive- and Wangtek- compatible)
+	tape drives <sup>(1) (2)</sup>
   </ul>
 
 <li> CD-ROM drives:
   <ul>
-  <li> Mitsumi CD-ROM drives <sup>(1) (2)</sup> [Note: The Mitsumi driver device probe is known to cause trouble with several devices!]
+  <li> Mitsumi CD-ROM drives <sup>(1) (2)</sup>
+	[Note: The Mitsumi driver device probe is known
+	to cause trouble with several devices!]
   <li> Most SCSI CD-ROM drives
   <li> Most ATAPI IDE CD-ROM drives
   </ul>
@@ -194,6 +208,8 @@
   <li> Serial mice (uses serial port driver)
   </ul>
 
+<li> APM power management.
+
 <li> Sound Cards:
   <ul>
   <li> SoundBlaster <sup>(1) (2)</sup>
@@ -226,10 +242,8 @@
 <h3>Unsupported Hardware</h3>
 <ul>
 <li> "Micro Channel" MCA bus used in many IBM PS/2 models.
-<li> APM power management -- if your system supports it, turn it off!
 <li> NCR 5380-based SCSI host adapters.
 <li> QIC-40 and QIC-80 tape drives.  (Those are the tape drives that connect to the floppy disk controller.)
-<li> WD-7000 SCSI host adapters.
 <li> Multiprocessor Pentium and Pentium Pro systems.  (Though they should run fine using one processor only.)
 </ul>
 </p>
@@ -242,7 +256,7 @@
 <a href=plat.html><img src=back.gif border=0 alt=OpenBSD></a> 
 <a href=mailto:www@openbsd.org>www@openbsd.org</a>
 <br>
-<small>$OpenBSD: i386.html,v 1.44 1997/10/11 19:13:07 deraadt Exp $</small>
+<small>$OpenBSD: i386.html,v 1.45 1997/10/11 19:21:05 deraadt Exp $</small>
 
 </body>
 </html>