+This works stably. +
- Everything supported except the parallel port.
- I have a driver for the parallel port, but it is not integrated yet. +
-
-MVME162
-(68040): this works stably
+
+This works stably. +
- Everything important working.. with these additional notes:
- SCSI working (4.5MB/sec off a 4.2G Quantum Grand Prix).
- VME bus support untested
- parity and ecc not supported
- flash driver not working
- IP module driver untested +
-
-MVME165
-(68040): what little I know about it makes me think it doable.
+
+What little we know about it makes us think it is doable. +
-
-MVME166
-(68040): this might already work. anyone want to test it?
+
+This might already work. Anyone want to test it? +
-
-MVME167
-(68040): this works stably.
+
+This works stably. +
- Works as well as the MVME162 port above, plus these notes:
- parallel port not supported. +
-
-MVME177
-(68060): Dale appears to be slowly working on this.
-
+This works stably. +
-
+
- Works as well as the MVME167 port. +
-
Motorola makes a few older 68020/68851 models which could perhaps also be
supported. As well, I've noticed that Heurikon 68040/68060 cards have
@@ -103,23 +112,23 @@
-Copyright Motorola Inc. 1988 - 1993, All Rights Reserved
+Copyright Motorola Inc. 1988 - ...., All Rights Reserved
-MVME162 Debugger/Diagnostics Release Version 2.1 - 10/19/93
+MVME177 Debugger/Diagnostics Release Version ...
COLD Start
-Local Memory Found =01000000 (&16777216)
+Local Memory Found =02000000 (&33554432)
-MPU Clock Speed =25Mhz
+MPU Clock Speed =50Mhz
162-Bug>bo
-Booting from: VME162, Controller 0, Drive 0
+Booting from: VME177, Controller 0, Drive 0
Loading: Operating System
Volume: NBSD
IPL loaded at: $003F0000
->> OpenBSD BOOT [$Revision: 1.32 $]
+>> OpenBSD BOOT [$Revision: 1.33 $]
using ctrl 0 dev 0
Booting /OpenBSD @ 0x10000
8c000+8000+caf8 [8f40+9162] start 0x10020
@@ -127,39 +136,46 @@
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
-OpenBSD 1.0A (GENERIC) #39: Mon Sep 11 18:10:58 MDT 1995
- deraadt@m162:/usr/src/sys/arch/mvme68k/compile/GENERIC
-Motorola MVME162-263: 25MHz MC68040 CPU+MMU+FPU, 4k on-chip physical I/D caches
-real mem = 16777216
-avail mem = 14073856
-using 204 buffers containing 835584 bytes of memory
+OpenBSD 2.6-current (GENERIC) #10: Mon Jan 24 14:04:57 PST 2000
+ deraadt@m167.openbsd.org:/sys/arch/mvme68k/compile/GENERIC
+Motorola 177-001: 50MHz MC68060 CPU+MMU+FPU, 8k on-chip physical I/D caches, unknown FPU
+real mem = 33554432
+avail mem = 27975680
+using 409 buffers containing 1675264 bytes of memory
mainbus0 (root)
-mc0 at mainbus0 addr 0xfff00000: rev 0
-clock0 at mc0 ipl 5
-zs0 at mc0 offset 0x45000 ipl 4
-zs1 at mc0 offset 0x45801 ipl 4
-ie0 at mc0 offset 0x46000 ipl 1: address 08:00:3e:24:02:1e
-ipic0 at mc0 offset 0xbc000: rev 0
-siop0 at mc0 offset 0x47000 ipl 2: version 2 target 7
-scsibus0 at siop0
-siop0: target 0 now synchronous, period=100ns, offset=8
-siop0 targ 0 lun 0: <QUANTUM, XP34301, 1051> SCSI2 0/direct fixed
-sd0 at scsibus0: 4106MB, 4076 cyl, 20 head, 103 sec, 512 bytes/sec
-memc0 at mc0 offset 0x43000: MCECC rev 0
-nvram0 at mc0 offset 0xc0000: MK48T08 len 8192
-vme0 at mc0 offset 0x40000: scon
+pcctwo0 at mainbus0 addr 0xfff00000: rev 0
+clock0 at pcctwo0 ipl 5
+cl0 at pcctwo0 offset 0x45000 ipl 3 console
+vme0 at pcctwo0 offset 0x40000: system controller
+vme0: using BUG parameters
+vme0: 1phys 0x02000000-0xefff0000 to VME 0x02000000-0xefff0000
+vme0: 2phys 0x00000000-0x00000000 to VME 0x00000000-0x00000000
+vme0: 3phys 0x00400000-0x00ff0000 to VME 0x00400000-0x00ff0000
+vme0: 4phys 0x00000000-0x00000000 to VME 0x00000000-0x00000000
+vme0: vme to cpu irq level 1:1
vmes0 at vme0
vmel0 at vme0
-flash0 at mainbus0 addr 0xffa00000: intel 28F008SA-L len 1048576
+ie0 at pcctwo0 offset 0x46000 ipl 1: address 08:00:3e:23:5c:a2
+siop0 at pcctwo0 offset 0x47000 ipl 2: version 2 target 7
+scsibus0 at siop0: 8 targets
+siop0: target 0 now synchronous, period=100ns, offset=8
+sd0 at scsibus0 targ 0 lun 0: SCSI2 0/direct fixed
+sd0: 1042MB, 3835 cyl, 4 head, 139 sec, 512 bytes/sec, 2134305 sec total
+memc0 at pcctwo0 offset 0x43000: MCECC rev 0
+nvram0 at pcctwo0 offset 0xc0000: MK48T08 len 8192
+flash0 at mainbus0 addr 0xffa00000: unknown manu 0x00 ident 00
sram0 at mainbus0 addr 0xffe00000: len 131072
+boot device: sd0
root on sd0a
+ie0: supplying EUI64: 08:00:3e:ff:fe:23:5c:a2
+rootdev=0x400 rrootdev=0x800 rawdev=0x802
Automatic boot in progress: starting file system checks.
/dev/rsd0a: file system is clean; not checking
/dev/rsd0g: file system is clean; not checking
/dev/rsd0e: file system is clean; not checking
setting tty flags
starting network
-add host m162: gateway localhost
+add host m177: gateway localhost
starting rpc daemons: portmap ypbind nfsiod amd.
starting system logger, time daemon.
checking for core dump...
@@ -171,10 +187,10 @@
starting network daemons: routed printer inetd.
starting local daemons:.
runtime link editor directory cache
-Thu Sep 14 03:58:38 MDT 1995
-Sep 14 03:58:38 m162 init: kernel security level changed from 0 to 1
+Thu Jan 14 03:58:38 MDT 2000
+Sep 14 03:58:38 m177 init: kernel security level changed from 0 to 1
-OpenBSD/mvme68k (m162) (ttya)
+OpenBSD/mvme68k (m177) (ttya)
login:
@@ -183,7 +199,7 @@
www@openbsd.org
-$OpenBSD: mvme68k.html,v 1.32 1998/11/11 16:56:39 deraadt Exp $ +$OpenBSD: mvme68k.html,v 1.33 2000/01/25 21:50:04 deraadt Exp $