=================================================================== RCS file: /cvsrepo/anoncvs/cvs/www/mvme88k.html,v retrieving revision 1.32 retrieving revision 1.33 diff -c -r1.32 -r1.33 *** www/mvme88k.html 2003/08/05 13:53:02 1.32 --- www/mvme88k.html 2003/08/10 21:20:15 1.33 *************** *** 69,75 **** egcs revealed a lot of problems in the mvme88k support in gcc, which could not be fixed in time for mvme88k to be a supported OpenBSD 2.5 release. - As of today, these problems are still not entirely fixed.
--- 69,74 ---- *************** *** 85,94 ****
! Recent work on the toolchain eventually produced a working compiler, as long ! as optimization is not enabled; work is in progress towards getting reliable ! optimization as well. Unfortunately, numerous kernel stability problems make ! this effort progress very slowly at the moment.
! Recent work on the toolchain eventually produced a working compiler, although ! optimization is not yet totally reliable. Unfortunately, a few kernel bugs ! prevent the system from being very stable at the moment.
+
+ +
+ Although these boards have been more or less supported in the past, their + support is currently non-functional in the latest snapshot. +
! Due to the compiler problems, no snapshots have been generated since a long ! time. There was a 2.4-current snapshot on the ftp mirrors for some time, which ! supports only MVME187 cards and can be used as a very crude basis to rebuild ! a complete system, for the adventurous hacker. If you want to get it, ask ! miod. Access to an ! OpenBSD/mvme68k system greatly helps, as both ! systems are very similar.
- -- Due to the recent toolchain improvements, a new snapshot is expected soon. - Stay tuned! -
-! Snapshots are made available from time to time, in ! this location ! as well as in a few ! mirrors. ! Here are the ! ! OpenBSD/mvme88k snapshot installation instructions ! as well.
! This is a dmesg of an MVME188 system.
! Model: Motorola MVME188 25Mhz ! MVME188 board configuration #5: 2 CPUs 4 CMMUs ! CPU0 is attached with 2 MC88204 CMMUs ! CPU1 is attached with 2 MC88204 CMMUs CPU0 is master CPU ! [ using 146999 bytes of bsd a.out symbol table ] ! ddb enabled Copyright (c) 1982, 1986, 1989, 1991, 1993 ! The Regents of the University of California. All rights reserved. ! Copyright (c) 1995-2001 OpenBSD. All rights reserved. http://www.OpenBSD.org ! OpenBSD 2.9-current (GENERIC) #59: Thu Jun 14 01:18:03 GMT 2001 ! miod@arzon:/src/current/src/sys/arch/mvme88k/compile/GENERIC ! real mem = 33550336 ! avail mem = 28381184 (6929 pages) ! using 435 buffers containing 1781760 bytes of memory ! mainbus0 (root) machine type MVME188 bugtty0 at mainbus0 addr 0xfff45000: bugtty ! syscon0 at mainbus0 addr 0xfff00000: rev 1 ! clock0 at syscon0 ipl 5: VME188 ! sclock0 at syscon0 ipl 5: VME188 ! nvram0 at syscon0 offset 0x80000: MK48T02 len 2048 ! dart0 at syscon0 offset 0x82000 ipl 3 console (ttya) ! vme0 at syscon0 offset 0x85000: system controller vmes0 at vme0 ! vs0 at vmes0 addr 0xffff9000 vaddr 0x2e59000 vec 0x80 ipl 2: target 7 scsibus0 at vs0: 8 targets ! sd0 at scsibus0 targ 1 lun 0: <FUJITSU, M2624F-512, M405> SCSI1 0/direct fixed ! sd0: 496MB, 1429 cyl, 11 head, 64 sec, 512 bytes/sec, 1015812 sec total ! vs1 at vmes0 addr 0xffff9800 vaddr 0x2e5a800 vec 0x82 ipl 2: target 7 ! scsibus1 at vs1: 8 targets ! ve0 at vmes0 addr 0xffff1200 vaddr 0x2e5b200 vec 0x74 ipl 1 ! ve0: address 00:00:77:83:9f:cc ! ve0: 128 receive buffers, 32 transmit buffers vmel0 at vme0 boot device: sd0 root on sd0a rootdev=0x400 rrootdev=0x800 rawdev=0x802
! This is a boot log of an MVME187 system.
! MVME187 board configuration #A: 1 CPUs 2 CMMUs ! CPU0 is attached with 2 MC88200 CMMUs CPU0 is master CPU ! [ using 163088 bytes of bsd a.out symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 ! The Regents of the University of California. All rights reserved. ! Copyright (c) 1995-2003 OpenBSD. All rights reserved. http://www.OpenBSD.org ! OpenBSD 3.3-current (GENERIC) #86: Sun Aug 10 03:49:48 GMT 2003 ! miod@arzon:/usr/src/sys/arch/mvme88k/compile/GENERIC ! Model: Motorola MVME187, 33MHz ! real mem = 67108864 ! avail mem = 59138048 (14438 pages) ! using 844 buffers containing 3457024 bytes of memory ! mainbus0 (root) machine type MVME187 bugtty0 at mainbus0 addr 0xfff45000: bugtty ! pcctwo0 at mainbus0 addr 0xfff00000: rev 0 ! clock0 at pcctwo0 ipl 5: VME1x7 ! sclock0 at pcctwo0 ipl 5: VME1x7 ! memc0 at pcctwo0 offset 0x43000: MEMC040 rev 1 ! memc1 at pcctwo0 offset 0x43100: MCECC rev 0 ! nvram0 at pcctwo0 offset 0xc0000: MK48T08 len 8192 ! cl0 at pcctwo0 offset 0x45000 ipl 3 console ! vme0 at pcctwo0 offset 0x40000: vector base 0x80, system controller ! vme0: using BUG parameters ! vme0: 1phys 0x04000000-0xefff0000 to VME 0x04000000-0xefff0000 ! vme0: 2phys 0xff000000-0xff7f0000 to VME 0xff000000-0xff7f0000 ! vme0: 3phys 0x00000000-0x00000000 to VME 0x00000000-0x00000000 ! vme0: 4phys 0x00000000-0x00000000 to VME 0x00000000-0x00000000 ! vme0: vme to cpu irq level 1:1 vmes0 at vme0 ! vs0 at vmes0 addr 0xffff9000 vaddr 0x551b000 vec 0x80 ipl 2: target 7 scsibus0 at vs0: 8 targets ! sd0 at scsibus0 targ 0 lun 0: <COMPAQPC, DCAS-32160, S6CA> SCSI2 0/direct fixed ! sd0: 2006MB, 8188 cyl, 3 head, 167 sec, 512 bytes/sec, 4110000 sec total vmel0 at vme0 + ie0 at pcctwo0 offset 0x46000 ipl 1: address 08:00:3e:21:7c:74 boot device: sd0 root on sd0a rootdev=0x400 rrootdev=0x800 rawdev=0x802 + Automatic boot in progress: starting file system checks. + /dev/rsd0a: file system is clean; not checking + /dev/rsd0d: file system is clean; not checking + /dev/rsd0e: file system is clean; not checking + /dev/rsd0f: file system is clean; not checking + /dev/rsd0g: file system is clean; not checking + /dev/rsd0h: file system is clean; not checking + /dev/rsd0i: file system is clean; not checking + setting tty flags + ddb.console: 0 -> 1 + kern.splassert: 0 -> 2 + starting network + add net default: gateway odyssee + starting system logger + starting rpc daemons: portmap ypbind rdate timed. + savecore: no core dump + checking quotas: done. + building ps databases: kvm dev. + clearing /tmp + starting pre-securelevel daemons:. + setting kernel security level: kern.securelevel: 0 -> 1 + creating runtime link editor directory cache. + starting network daemons: inetd sshd. + starting local daemons:. + standard daemons: cron. + Sun Aug 10 20:22:04 GMT 2003 + + OpenBSD/mvme88k (arzon) (console) + + login: